|
COVER L9
TS2746C1
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INSTRUCTIONS - Read before operating equipment
This product was designed and manufactured to meet strict quality and
safety standards. There are, however, some installation and operation pre-
cautions which you should be particularly aware of.
11. Power-Cord Protection - Power supply cords should be routed so
that they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords and plugs,
convenience receptacles, and the point where they exit from the
appliance.
1. Read Instructions - All the safety and operating instructions should
be read before the appliance is operated.
12. Cleaning - The appliance should be cleaned only as recommended
2. Retain Instructions - The safety and operating instructions should
by the manufacturer.
be retained for future reference.
13. Power Lines - An outdoor antenna should be located away from
3. Heed Warnings - All warnings on the appliance and in the operating
power lines.
instructions should be adhered to.
14. Outdoor Antenna Grounding - If an outside antenna is connected to
the receiver, be sure the antenna system is grounded so as to pro-
vide some protection against voltage surges and built up static
charges.
4. Follow Instructions - All operating and use instructions should be
followed.
5. Water and Moisture - The appliance should not be used near water
- for example, near a bathtub, washbowl, kitchen sink, laundry tub,
in a wet basement or near a swimming pool, etc.
Section 810 of the National Electric Code, ANSI/NFPA No. 70-1984,
provides information with respect to proper grounding of the mats
and supporting structure grounding of the lead-in wire to an anten-
na discharge unit, size of grounding connectors, location of antenna-
discharge unit, connection to grounding electrodes and require-
ments for the grounding electrode. See Fig. below.
6. Carts and Stands - The appliance should be used only with a cart or
stand that is recommended by the manufacturer.
6A.
An appliance and cart combination should be moved
with care. Quick stops, excessive force, and uneven sur-
faces may cause the appliance and cart combination to
overturn.
15. Non-use Periods - The power cord of the appliance should be
unplugged from the outlet when left unused for a long period of time.
16. Object and Liquid Entry - Care should be taken so that objects do not
6B. Tilt/Stability - All televisions must comply with recommended inter-
national global safety standards for tilt and stability properties of its
cabinet design.
fall and liquids are not spilled into the enclosure through openings.
17. Damage Requiring Service - The appliance should be serviced by
•
Do not compromise these design standards by applying exces-
sive pull force to the front, or top, of the cabinet which could
ultimately overturn the product.
Also, do not endanger yourself, or children, by placing elec-
tronic equipment/toys on the top of the cabinet. Such items
could unsuspectingly fall from the top of the set and cause
product damage and/or personal injury.
qualified service personnel when:
A. The power supply cord or the plug has been damaged; or
B. Objects have fallen, or liquid has been spilled into the appliance;
or
•
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or exhibits a
marked change in performance; or
7. Wall or Ceiling Mounting - The appliance should be mounted to a
E. The appliance has been dropped, or the enclosure damaged.
wall or ceiling only as recommended by the manufacturer.
18. Servicing - The user should not attempt to service the appliance
beyond that described in the operating instructions. All other servic-
ing should be referred to qualified service personnel.
8. Ventilation - The appliance should be situated so that its location or
position does not interfere with its proper ventilation. For example,
the appliance should not be situated on a bed, sofa, rug, or similar
surface that may block the ventilation openings; or, placed in a built-
in installation, such as a bookcase or cabinet that may impede the
flow of air through the ventilation openings.
9. Heat - The appliance should be situated away from heat sources
such as radiators, heat registers, stoves, or other appliances (includ-
ing amplifiers) that produce heat.
Note to the CATV system installer: This reminder is provided to call the
CATV system installer's attention to Article 820-40 of the NEC that pro-
vides guidelines for proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding system of the building,
as close to the point of cable entry as practical.
10. Power Sources - The appliance should be connected to a power sup-
ply only of the type described in the operating instructions or as
marked on the appliance.
Example of Antenna Grounding
as per NEC - National Electric Code
GROUND CLAMP
ANTENNA LEAD IN WIRE
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING ELECTRODE SYSTEM
(NEC ART 250, PART H)
ELECTRIC SERVICE EQUIPMENT
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
Introduction
Here are a few of the special features built into this
new Color Television:
Welcome/Registration of Your TV ............................2
Safety/Precautions .....................................................3
Table of Contents.......................................................4
Features......................................................................4
Basic Cable TV Hookups ..........................................5
Basic Antenna Hookups.............................................6
Basic TV to VCR Hookup.........................................7
Basic TV and Remote Operations .............................8
TV Remote Buttons ...................................................9
SmartLockTM feature allows you to block the
viewing of certain channels or external audio/video
connections were you might not want your children
viewing inappropriate material.
Infrared Remote Control works your TV set, VCR,
and a variety of wireless remote control Cable
Converters (Satellite Receivers, DVD, etc.).
Standard broadcast (VHF/UHF) or Cable TV
(CATV) channel capability.
Stereo TV with built-in audio amplifier and twin
speaker system for receiving TV programs broadcast
in stereo sound. This TV can actually detect if the
signal being received is Stereo and adjust for it.
Onscreen MENU
✧ Setting the Language Control.................10
✧Using the Tuner Control ...................................11
✧Using the Auto Program Control......................12
✧How to Add and Delete Channels ....................13
✧Using the External (Input Naming) Control.....14
✧Adjusting the TV Picture..................................15
✧Activating Noise Reduction (Picture) Control .16
✧Setting the TV for Closed Caption ...................17
✧Using the Sleep Timer Control.........................18
✧Using the Alternate Channel.............................19
Closed Captioning allows the viewer to read TV
program dialogue or voice conversations as onscreen
text.
Automatic Programming of Channels for quick
and easy selection of favorite stations available in
your area.
Onscreen Features (in either English, French, or
Spanish) show helpful messages for setting of TV
controls.
Sleeptimer automatically turns the TV OFF at
SmartLockTM
preset times.
✧ Understanding the SmartLock Feature ......20
✧ Setting the SmartLock Access Code................21
✧ Setting the SmartLock to Block Channels.......22
✧ Setting SmartLock’s Blocking Options ...........23
✧ Blocking Using the Movie/TV Ratings .....24-25
✧ Using the SmartLock Review Screen..............26
Sound
✧ Setting the TV for Stereo Programs ................27
✧Using the Volume Bar Control .........................28
✧Using the Input Control with the Audio/Video
Input Jacks ........................................................29
NOTE: This owner's manual is used with
several different television models. Not all
features (and drawings) discussed in this
manual will necessarily match those found
with your television system. This is normal and
does not require you contacting your dealer or
requesting service.
General Information
Tips if Something Isn’t Working .............................30
Glossary of TV Terms..............................................31
Index ........................................................................32
Factory Service Locations..................................33-34
Notes ........................................................................35
Warranty...................................................................36
SmartPicture™, SmartSound™, SmartSurf™, and SmartLock™ are all
registered trademarks of Philips Consumer Electronics Company.
Copyright © 1999 Philips Consumer Electronics Company. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
HOOKING UP YOUR TV (BASIC CABLE TV CONNECTIONS)
SMART
CABLE TV
HELP
our Cable TV input into your
Yhome may be a single (75
ohm) cable, or a Converter Box
installation. In either case the
connection to the TV is very easy.
Just put the threaded end of the
cable signal to the TV's antenna
plug and screw it down tight.
BEGIN
Remember:
Set the TV for the
type signal you've
just connected (see
the “Tuner” section
on page 11 of this
manual.)
To select only the
channel numbers on
your Cable system
see “Auto Program"
(page 12). If you use
a Cable Converter
box, set the TV to the
same channel as the
converter's CH 3/4
switch (on the rear of
the converter.)
If your Cable TV signal is a sin-
gle round cable (75 ohm) then
you're ready to connect to the TV.
If you have a Cable Converter
Box:
Connect the Cable TV signal to the
Cable Signal IN(put) plug on the
Converter..
75
⍀
V
ID
E
O
1
L/MO
N
O
AU
D
IO
R
in
Connect the Cable TV cable to the
75 Ω plug on the TV.
If you have a Cable Converter Box:
Connect the OUT(put) plug from the
Converter to the 75Ω plug on the TV.
2
75 ⍀
Cable TV Company
Cable TV Signal Input
VIDEO
OR
Back of TV
L/MONO
AUDIO
R
OUT
IN
Round Cable
75Ω Ohm
in
1
Cable TV Converter
Box Connection
Download from Www.Somanuals.com. All Manuals Search And Download.
HOOKING UP YOUR TV (BASIC ANTENNA TV CONNECTIONS)
SMART
ANTENNA
HELP
combination antenna receives
Anormal broadcast channels
(VHF 2-13 and UHF 14-69).
Your connection is easy since
there is only one 75Ω (ohm)
Remember:
Be sure to set the
TV for the type sig-
nal you've connect-
ed (see the “Tuner”
section on page 11
of this manual.)
Note: For homes with separate UHF and VHF antennas
you will need an optional combiner to connect to the TV.
U/V
Combiner
antenna plug on the back of your
TV - and that’s where the antenna
goes.
BEGIN
To set the TV to
select only the chan-
nel numbers in your
area see how to
“Program" or "Add"
channels in the TV’s
memory on page 12
(Auto Program sec-
tion).
If your antenna has a round
cable (75 ohm) on the end, then
you're ready to connect it to the TV.
If your antenna has flat twin-lead
wire (300 ohm), you first need to
attach the antenna wires to the screws
on a 300 to 75 ohm adapter.
75
⍀
V
ID
E
O
1
O
L/M
N
O
A
U
D
IO
R
i
n
Back of TV
75-300 Ohm Adapter
Push the round end of the adapter
(or antenna) onto the 75 Ω plug
on the rear of the TV. If the round
end of the antenna wire is threaded,
screw it down tight.
To order any option-
al accessory contact
your dealer or the
Philips Parts Center
at 1-800-851-8885.
75
⍀
V
ID
E
O
1
L/MO
N
O
A
U
D
IO
R
in
Combination VHF/UHF
Antenna
(Outdoor or Indoor)
300 to 75Ω
Adapter
2
1
75 ⍀
VIDEO
Twin Lead
Wire
OR
L/MONO
AUDIO
R
Back of TV
Round Cable
75Ω
in
Download from Www.Somanuals.com. All Manuals Search And Download.
HOOKING UP YOUR TV (BASIC TV TO VCR CONNECTIONS)
TV TO VCR
he basic Antenna, or Cable
TTV, to VCR to TV connection
is shown to the right. For more
information on other hookups
(possible when Cable
Converter/Descrambler boxes are
included) refer to your accessory
VCR and Cable Converter
Owner's Manual for details.
BEGIN
Connect your Antenna or Cable
TV signal to the IN FROM
ANT(enna) plug on the VCR.
Connect the OUT TO TV plug
on the VCR to the 75 Ω plug on the
TV (connecting cable supplied with
the VCR.)
75
⍀
V
ID
E
O
1
L/MO
N
O
AU
D
IO
R
in
Outdoor
VHF/UHF
Antenna
300 to 75Ω
Ohm Adapter
1
2
75 ⍀
OR
OUT TO TV
IN FROM ANT.
VIDEO
L/MONO
AUDIO
R
Back of TV
Cable TV signal
VCR
in
Round Cable
75Ω Supplied with VCR
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC TV/REMOTE OPERATIONS
TELEVISION
BEGIN
Press the POWER button to
turn the TV ON.
Press the VOLUME + button to
increase the sound level or the
VOLUME – button to lower the
sound level.
6
STEREO
Pressing both buttons at the same
time will display the onscreen menu.
Once in the menu, use these button
to make adjustments or selections.
IN
ME
S
T
N
A
LL
U
/
–
VO
LUME
+
C
H
A
N
N
E
L
P
O
W
E
R
Press the CHANNEL UP ▲ or
DOWN ▼ button to select TV
channels.
REMOTE SENSOR WINDOW
MENU
–
VOLUME +
CHANNEL
REMOTE
POWER
BATTERY INSTALLATION
1
3
2
o load the supplied batteries
Tinto the remote:
1. Remove the battery compart-
ment lid on the back of the remote.
2. Place the batteries (2-AAA) in
the remote. Be sure the (+) and (-)
ends of the batteries line up correctly
(inside of case is marked.)
Point the remote control toward
the remote sensor window on
the TV when operating the TV
with the remote.
3
3. Reattach the battery lid.
SMART HELP
Remember,
You can press
The tuned channel
number will always
You can also press the
STATUS/EXIT button
any button on the front
of the TV to turn the
TV ON.
briefly appear when the (on the remote) to see
TV is first turned ON
(and with channel
changes.)
what channel the TV is
ON.
Download from Www.Somanuals.com. All Manuals Search And Download.
TV REMOTE BUTTONS
Power Button
Press to turn the TV ON and OFF.
Channel (+), (–) Buttons
Press to change the tuned channel.
Status/Exit Button
Press to see the current channel number on the TV screen.
Also press to clear the TV screen after control adjustments.
STATUS/EXIT
POWER
Cursor Buttons
CH
MENU
CH
Use these button to select and adjust the TV’s onscreen
menu.
VOL
VOL
MUTE
A/CH
Volume (+), (–) Buttons
Press to adjust the TV sound level.
Mute Button
Press to turn the sound OFF on the TV. Press again to
return the sound to its previous level.
1
4
2
5
8
0
3
6
Menu Button
Press for the onscreen menu to appear. Pressing the menu
button after menu selections are made will eliminate the
menu from the display.
7
9
A/CH Button
Press to toggle between the currently viewed channel and the
previously viewed channel.
CC
SLEEP
Number Buttons
Press the number buttons to select TV channels. (Example:
Press the number 6 for channel 6; press the number 1, then
the number 2 for channel 12; press the number 1, then 2,
then 5 for the channel 125.)
CC Button
Press to select Closed Caption options within the menu.
Sleep Button
Press to set the TV to automatically turn itself OFF.
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE LANGUAGE CONTROL
or our Spanish and French speak-
Fing TV owners an onscreen LAN-
GUAGE option is present. With the
LANGUAGE control you can set the
TV’s onscreen menu to be shown in
either English, Spanish, or French.
BEGIN
Press the MENU button on the
remote to show the onscreen menu.
ᮣ
SmartLock
Press the CURSOR UP ▲ or
DOWN ▼ buttons to scroll through
the onscreen menu until the word
SETUP is highlighted.
CC
OFF
ᮣ
SETUP
ᮣ
SmartLock REVIEW
BRIGHTNESS
30
LANGUAGE
TUNER
ENGLISH
CABLE
ᮣ
Press the CURSOR RIGHT ᮣ
button to display the SETUP menu
features.
AUTO PROGRAM
Press CURSOR UP ▲ or
DOWN ▼ buttons to scroll the
Setup features until the word
LANGUAGE is highlighted.
LANGUAGE
LANGUAGE
FRANCAIS
ESPANOL
4
or
2
ER
TATUS/EXIT
1
CH
MENU
CH
VO
VOL
Press the CURSOR RIGHT ᮣ
button repeatedly to select ENG-
LISH, ESPANOL (Spanish), or
FRANCAIS (French).
MUTE
A/CH
3
5
1
4
2
5
8
0
3
6
7
9
CC
SLEEP
SMART HELP
Remember: The Language
control only makes the TV’s
onscreen MENU items appear in
English, Spanish, or French text.
It does not change the other onscreen
text features such as Closed Caption
(CC) TV shows.
The onscreen menu will time out and
disappear from the screen when you
finish, or you can press the STA-
TUS/EXIT button to clear the menu
from the screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE TUNER CONTROL
he TUNER feature allows you to
Tchange the TV’s signal input to
either CABLE, ANTENNA or AUTO
mode. It’s important for the TV to
know what type of signal to look for.
(From a Cable TV signal or a nor-
mal Antenna signal.) In the AUTO
mode, when the AUTO PROGRAM
feature is activated, the TV will auto-
matically choose the correct mode.
ᮣ
SmartLock
CC
OFF
ᮣ
BEGIN
SETUP
Press the MENU button on the
remote to show the onscreen menu.
ᮣ
SmartLock REVIEW
BRIGHTNESS
LANGUAGE
TUNER
ENGLISH
CABLE
ᮣ
30
Press the CURSOR UP ▲ or
DOWN ▼ buttons to scroll through
the onscreen menu until the word
SETUP is highlighted.
AUTO PROGRAM
CHANNEL EDIT
ᮣ
TUNER
TUNER
ANTENNA
AUTO
4
Press the CURSOR RIGHT ᮣ
button to display the SETUP menu
features.
2
ER
TATUS/EXIT
1
CH
MENU
CH
VO
VOL
Press CURSOR UP ▲ or
DOWN ▼ buttons to scroll the
Setup features until the word
TUNER is highlighted.
MUTE
A/CH
3
5
1
4
2
5
8
0
3
6
Press the CURSOR RIGHT ᮣ
button to select either CABLE,
ANTENNA or AUTO mode.
7
9
CC
SLEEP
SMART HELP
When CABLE is selected,
channels 1-125 are available.
When ANTENNA is selected, chan-
nels 2-69 are available.
When AUTO is selected, the TV will
automatically set itself to the correct
mode based on the type of signal it
detects when the AUTO PROGRAM
feature is activated.
The onscreen menu will time out and
disappear from the screen when you
finish, or you can press the STA-
TUS/EXIT button to clear the menu
from the screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE AUTO PROGRAM CONTROL
our TV can automatically set itself
Yfor local area (or Cable TV) chan-
nels. This makes it easy for you to
select only the TV stations in your
area when the CHANNEL (+), (–) but-
tons are pressed.
Note: Make sure the antenna or cable
signal connection has been completed
before AUTO PROGRAM is activated.
ᮣ
SmartLock
CC
OFF
ᮣ
BEGIN
SETUP
LANGUAGE
TUNER
ENGLISH
Press the MENU button on the
remote to show the onscreen menu.
ᮣ
SmartLock REVIEW
BRIGHTNESS
CABLE
ᮣ
30
AUTO PROGRAM
CHANNEL EDIT
EXTERNAL
Press the CURSOR UP ▲ or
DOWN ▼ buttons to scroll through
the onscreen menu until the word
SETUP is highlighted.
ᮣ
ᮣ
Press the CURSOR RIGHT ᮣ
button to display the SETUP menu
features.
4
2
WER
TATUS/EXIT
1
CH
MENU
CH
VOL
VOL
Press CURSOR UP ▲ or
DOWN ▼ buttons to scroll the
Setup features until the words AUTO
PROGRAM are highlighted.
MUTE
A/CH
3
AUTO PROG
33
5
1
4
2
5
8
0
3
6
Press the CURSOR RIGHT ᮣ
button to start the Auto Program
scanning of channels.
7
9
CC
SLEEP
Auto Program will scan for
all available channels within
the Antenna/Cable signal.
When finished, the TV will
go back to the SETUP menu.
SMART HELP
Try it out. Press the CHAN-
NEL (+), (–) buttons and see
which channels have been added to
the TV’s memory.
If you want to delete any unwanted
channels from the TV’s memory, see the
CHANNEL EDIT section on page 13.
The onscreen menu will time out and
disappear from the screen when you
finish, or you can press the STA-
TUS/EXIT button to clear the menu
from the screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO ADD AND DELETE CHANNELS
hannel Edit makes it easy for you
Cto ADD or DELETE channels
from the list of channels stored in the
TV’s memory.
BEGIN
Press the MENU button on the
remote to show the onscreen menu.
Press the CURSOR UP ▲ or
DOWN ▼ buttons to scroll through
the onscreen menu until the word
SETUP is highlighted.
ᮣ
SmartLock
CC
OFF
ᮣ
SETUP
TUNER
CABLE
ᮣ
ᮣ
SmartLock REVIEW
BRIGHTNESS
AUTO PROGRAM
CHANNEL EDIT
EXTERNAL
30
Press the CURSOR RIGHT ᮣ
button to display the SETUP menu
features.
ᮣ
ᮣ
Press the CURSOR UP ▲ or
DOWN ▼ buttons to scroll the
Setup features until the words
CHANNEL EDIT are highlighted.
CHANNEL
2
Press the CURSOR RIGHT ᮣ
button to display the CHANNEL
EDIT options.
7
6
SAVED
YES
TATUS/EXIT
WER
CHANNEL ADDED
1
CH
MENU
CH
VOL
VOL
With the CHANNEL EDIT
options displayed, and the word
CHANNEL highlighted; enter the
channel number (with the
NUMBERED or the CURSOR
RIGHT ᮣ or LEFT ᮤ buttons)
you wish to ADD to, or DELETE
from the TV’s memory.
MUTE
A/CH
3
5
7
CHANNEL
SAVED
2
1
2
5
8
0
3
NO
2
CHANNEL DELETED
4
7
9
CC
SLEEP
Scroll down (using the CUR-
SOR UP ▲ or DOWN ▼ buttons)
to highlight the word SAVED.
Now use the CURSOR RIGHT ᮣ
button to toggle between YES or
NO.
If YES is selected the menu reads
“CHANNEL ADDED” and the
channel is added to the TV’s memo-
ry. If NO is selected the menu reads
“CHANNEL DELETED” and the
channel is deleted from the TV’s
memory.
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE EXTERNAL CONTROL
he External feature allows you to
Trename your input source selec-
tions. When the Input feature (refer to
Owner’s Manual for details) is
accessed to change audio/video jacks,
your source selection will be called by
the name you choose. This name will
also appear onscreen when using the
audio/video inputs.
ᮣ
SmartLock
BEGIN
CC
OFF
ᮣ
SETUP
ᮣ
ᮣ
ᮣ
Press the MENU button on the
remote to show the onscreen menu.
AUTO PROGRAM
CHANNEL EDIT
EXTERNAL
ᮣ
SmartLock REVIEW
BRIGHTNESS
30
Press the CURSOR UP ▲ or
DOWN ▼ buttons to scroll through
the onscreen menu until the word
SETUP is highlighted.
Press the CURSOR RIGHT ᮣ
button to display the SETUP menu
features.
4
2
STATUS/EXIT
WER
1
CH
MENU
CH
Press the CURSOR UP ▲ or
DOWN ▼ buttons to scroll the
Setup features until the word
EXTERNAL is highlighted.
VO
VOL
6
5
MUTE
A/CH
EXT 1
EXT
3
1
4
2
5
8
0
3
6
EXT 1
EXT 1
EXT 1
EXT 1
EXT 1
EXT 1
GAM
DVD
VCD
VCR
LD
Press the CURSOR RIGHT ᮣ
button to activate the External fea-
ture.
7
9
CC
SLEEP
With the External options menu
displayed, press the CURSOR
RIGHT ᮣ button to select a name
from the list: EXT, GAM, DVD,
VCD, VCR, LD, or SAT.
SAT
SMART HELP
Remember: This feature will
rename your external signal
source and appear onscreen with the
new name.
The onscreen menu will time out and
disappear from the screen when you
finish, or you can press the STA-
TUS/EXIT button to clear the menu
from the screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO ADJUST THE TV PICTURE
o adjust your TV picture con-
Ttrols, select a channel and follow
BEGIN
the steps shown below:
Press the MENU button on the
remote to display the onscreen menu.
Press the CURSOR UP ▲ or
DOWN ▼ buttons until the word
BRIGHTNESS is highlighted. (Or,
COLOR, PICTURE, SHARPNESS,
TINT depending on the adjustment
you want to make.)
ᮣ
SETUP
ᮣ
SmartLock REVIEW
BRIGHTNESS
COLOR
30
30
30
ᮣ
SmartLock REVIEW
BRIGHTNESS
COLOR
30
30
30
30
PICTURE
Press the CURSOR RIGHT ᮣ
or the CURSOR LEFT ᮤ buttons
to increase or decrease the brightness
of the picture.
PICTURE
SHARPNESS
BRIGHTNESS
COLOR
30
30
30
30
0
PICTURE
SHARPNESS
TINT
2
STATUS/EXIT
WER
SMART HELP
1
CH
MENU
CH
VOL
VOL
Remember: The onscreen
menu will time out and disap-
pear from the screen when you finish,
or you can press the STATUS/EXIT
button to clear the menu from the
screen.
MUTE
A/CH
COLOR
30
30
30
0
3
PICTURE
1
4
2
5
8
0
3
6
SHARPNESS
TINT
BRIGHTNESS Press the ᮣ or ᮤ but-
tons until darkest parts of the picture are
as bright as you prefer.
7
9
NOISE REDUCTION
ON
CC
SLEEP
COLOR Press the ᮣ or ᮤ buttons to
add or eliminate color.
PICTURE
30
SHARPNESS
TINT
30
0
PICTURE Press the ᮣ or ᮤ buttons
until lightest parts of the picture show
good detail.
NOISE REDUCTION
VOLUME
ON
15
SHARPNESS Press the ᮣ or ᮤ buttons
to improve detail in the picture.
TINT Press the ᮣ or ᮤ buttons to
obtain natural skin tones.
Download from Www.Somanuals.com. All Manuals Search And Download.
ACTIVATING THE NOISE REDUCTION (PICTURE) CONTROL
or many reasons such as poor
Fcable reception, the picture can
sometime appear slightly “speckled”
(or signal noise shown in the
picture). The NOISE REDUCTION
control can help eliminate this type
of interference and improve the
quality of the picture.
BEGIN
SHARPNESS
TINT
30
0
Press the MENU button on the
remote to display the onscreen menu.
NOISE REDUCTION
VOLUME
OFF
SHARPNESS
TINT
30
0
Press the CURSOR UP ▲ or
CURSOR DOWN ▼ button until
the words NOISE REDUCTION are
highlighted.
15
SOUND
STEREO
NOISE REDUCTION
VOLUME
ON
15
SOUND
STEREO
Press the CURSOR RIGHT ᮣ
or CURSOR LEFT ᮤ buttons to
activate or deactivate the Noise
Reduction Feature.
2
STATUS/EXIT
WER
1
CH
MENU
CH
VOL
VOL
SMART HELP
MUTE
A/CH
Remember: The onscreen
menu will disappear in a few
seconds after you have finished your
adjustment.
3
1
4
2
5
8
0
3
6
“Noise” Reduction is a video adjust-
ment feature that affects the picture
quality of the TV not the sound.
7
9
CC
SLEEP
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE CLOSED CAPTION CONTROL
losed Captioning (CC) allows
Cyou to read the voice content of
television programs on the TV
screen. Designed to help the hear-
ing impaired, this feature uses
onscreen “text boxes” to show dia-
logue and conversations while the
TV program is in progress.
NOTE: Not all TV programs and product commercials are made for broadcast
with Closed Caption (CC) information included. Neither are all Closed Caption
modes (CC-1, or CC-2) necessarily being used by a broadcast station during the
transmission of a closed caption program. Refer to your area's TV program listings
for the stations and times of Closed Caption shows.
BEGIN
Press the MENU button on the
remote to display the onscreen
menu.
SLEEP TIMER
SmartLock
CC
OFF
ᮣ
OFF
ᮣ
SLEEP TIMER
SmartLock
CC
OFF
ᮣ
1
Press the CURSOR UP ▲ or
CURSOR DOWN ▼ button until
the word CC (Closed Caption) is
highlighted.
SETUP
SmartLock REVIEW
ᮣ
SETUP
ᮣ
ᮣ
SmartLock REVIEW
Press the CURSOR RIGHT
ᮣ button to select the CLOSED
CAPTION option you want. (OFF,
1, 2, or MUTE) - dialogue (and
descriptions) for the action on the
captioned TV program will appear
onscreen.
SmartLock
CC
ᮣ
2
2
SETUP
ᮣ
ᮣ
TUS/EXIT
WER
SmartLock REVIEW
1
CH
MENU
CH
VO
VOL
SmartLock
CC
ᮣ
MUTE
A/CH
MUTE
ᮣ
NOTE: You can also set the
Closed Caption by pressing the CC
button on the remote. When pressed
repeatedly the screen will display the
options: CC-OFF, CC-1, CC-2, or
CC-MUTE.
SETUP
3
1
4
2
5
8
0
3
6
SmartLock REVIEW
ᮣ
4
4
7
9
CC
SLEEP
CC - 1
SMART HELP
Remember: The onscreen
menu will time out and disap-
pear from the screen when you fin-
ish, or you can press the
STATUS/EXIT button to clear the
menu from the screen.
CAPTION mode
Example Display
NOTE: The CC-MUTE option
can be used to set the TV to
turn the Closed Caption mode
“ON” whenever the MUTE
button on the remote is pressed.
“MUTE” will be displayed
smaller in the upper center of
the screen.
JOHN: Why did they move the
meeting up to this week?
MARSHA: I don't know, but they
are pushing to close the deal.
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE SLEEPTIMER CONTROL
ave you ever fallen asleep in
Hfront of the TV only to have it
wake you up at two in the morning
with a test pattern screeching in
your ears? Well, your TV can save
you all that trouble by automatical-
ly turning itself off.
12
15 MIN
BEGIN
12
12
12
Press the SLEEP button on the
remote control and the SLEEP timer
onscreen display will appear in the
lower center of the display.
30 MIN
45 MIN
60 MIN
Press the SLEEP button
repeatedly to pick the amount of
time (in 15 minute increments up
to 90 minutes; then 30 minute
increments up to 120 minutes; then
60 minute increments up to 240
minutes) before the TV will turn
itself off.
12
STATUS/EXIT
POWER
90 MIN
CH
MENU
CH
VOL
VOL
MUTE
A/CH
12
12
An onscreen count down will appear
during the last minute before the TV
shuts itself off.
120 MIN
180 MIN
1
4
2
5
8
0
3
6
1
7
9
CC
SLEEP
SMART HELP
12
Remember: The SLEEP-
TIMER control can also be set
within the TV’s main menu
240 MIN
The onscreen menu will time out
and disappear from the screen when
you finish, or you can press the
STATUS/EXIT button to clear the
menu from the screen.
12
12
50 SEC
10 SEC
During the last minute of a SLEEP
timer setting, an onscreen count
down will be displayed. Pressing
any button during the last minute
will cancel the SLEEP timer.
During the last 10 seconds of a
SLEEP timer setting, an onscreen
display will read GOOD BYE.
GOODBYE
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE TV’S ALTERNATE CHANNEL BUTTON
he Alternate Channel option
Tallows you to move between two
channels with the simple touch of
one button.
BEGIN
Press the CHANNEL (+) or (–)
buttons (or the NUMBER buttons)
to select a channel.
5
Press the CHANNEL (+) or (–)
buttons (or the NUMBER buttons)
to select a second channel.
24
Now, by pressing the A/CH
(Alternate Channel) button on
the remote, you can toggle between
the two selected channels.
Alternate Channel simply allows
you to toggle between the presently
viewed channel and the most
recently viewed channel.
STATUS/EXIT
POWER
CH
MENU
CH
VOL
VOL
MUTE
A/CH
1
4
2
5
8
0
3
6
3
7
CC
SL
1
2
Download from Www.Somanuals.com. All Manuals Search And Download.
UNDERSTANDING THE SMARTLOCK™ CONTROL
he SmartLock feature is an inte-
Tgrated circuit that receives and
processes data sent by broadcast-
ers, or other program providers,
that contain program content advi-
sories. When programmed by the
viewer, a TV with SmartLock can
respond to the content advisories
and block program content that may
be found objectionable (such as
offensive language, violence, sexual
situations, etc.). This is a great fea-
ture to censor the type of viewing
children may watch.
G
OFF
OFF
OFF
ON
TV-Y
OFF
PG
ᮣ
TV-Y7
TV-G
PG-1 3
R
OFF
ᮣ
TV-PG
TV-1 4
TV-MA
NC-1 7
X
ON
ᮣ
ON
ᮣ
Over the next few pages you’ll
learn how to block channels and
certain rated programming. Below
is a brief explanation of some terms
and ratings you will find in the
SmartLock feature.
MOVIE RATINGS
TV PARENTAL GUIDELINES
(MOTION PICTURE ASSOCIATION OF AMERICA)
(TV BROADCASTERS)
G: General Audience - All ages admit-
ted. Most parents would find this pro-
gram suitable for all ages. This type of
programming contains little or no vio-
lence, no strong language, and little or no
sexual dialogue or situations.
TV-Y - (All children -- This program
TV
is designed to be appropriate for all
Y children.) Designed for a very young
audience, including children ages 2-6. This
type of programming is not expected to
frighten younger children.
SmartLock offers various
BLOCKING OPTION controls
from which to choose:
PG: Parental Guidance Suggested - This
programming contains material that parents
may find unsuitable for younger children.)
It may contain one or more of the follow-
ing: Moderate violence, some sexual situa-
tions, infrequent coarse language, or some
suggestive dialogue.
TV-Y7 - (Directed to Older
TV
Children -- This program is designed
for children age 7 and above.) It may
MASTER DISABLE: This is what
might be called the "master switch"
for SmartLock. When in the ON
position, ALL blocking/censoring is
turned off (or disabled). When in the
OFF position, ALL blocking based
on specifically blocked settings will
take place.
be more appropriate for children who have
acquired the development skills needed to
distinguish between make-believe and reali-
ty. This programming may include mild fan-
tasy and comic violence (FV).
PG-13: Parents Strongly Cautioned - This
programming contains material that parents
may find unsuitable for children under the
age of 13. It contains one or more of the
following: violence, sexual situations,
coarse language, or suggestive dialogue.
TV-G - (General Audience -- Most
TV
parents would find this program suit-
Gable for all ages.) This type of pro-
BLOCK UNRATED: ALL unrated
programs based on the Movie
Ratings or Parental (TV) Guidelines
can be blocked if this feature is set
to ON and the MASTER DISABLE
feature is set to OFF.
gramming contains little or no violence, no
strong language, and little or no sexual dia-
logue or situations.
R: Restricted -This is programming is
specifically designed for adults. Anyone
under the age of 17 should only view this
programming with an accompanying parent
or adult guardian. It contains one or more
of the following: intense violence, intense
sexual situations, strong coarse language,
or intensely suggestive dialogue.
TV-PG - (Parental Guidance
TV
Suggested -- This program contains
material that parents may find unsuit-
BLOCK NO RATINGS: ALL pro-
gramming with NO content advisory
data can be blocked if this feature is
set to ON and the MASTER DIS-
ABLE feature is set to OFF.
able for younger children.) This type of pro-
gramming contains one or more of the fol-
lowing: Moderate violence (V), some sexual
situations (S), infrequent coarse language
(L), or some suggestive dialogue (D).
NC-17: No one under the age of 17 will
be admitted. - This type of programming
should be viewed by adults only. It con-
tains graphic violence, explicit sex, or
crude indecent language.
After an access code has been pro-
grammed, you can block up to 5
individual channels. But more than
just blocking channels, certain
blocking options exist which will
block programming based on ratings
patterned by the Motion Pictures
Association of America and TV
broadcasters. (See description of rat-
ings on this page.)
TV-14 - (Parents Strongly
TV
Cautioned -- This program contains
some material that many parents
would find unsuitable for children under 14
years of age.) This type of programming
contains one or more of the following:
intense violence (V), intense sexual situa-
tions (S), strong coarse language (L), or
intensely suggestive dialogue (D).
X: Adults Only - This type of programming
contains one or more of the following: very
graphic violence, very graphic and explicit
or indecent sexual acts, very coarse and
intensely suggestive language.
TV-MA - (Mature Audience Only --
This program is specifically designed
to be viewed by adults and therefore
TV
may be unsuitable for children under 17.)
This type of programming contains one or
more of the following: graphic violence (V),
explicit sexual situations (S), or crude inde-
cent language (L).
Download from Www.Somanuals.com. All Manuals Search And Download.
UNDERSTANDING THE SMARTLOCKTM CONTROL (ACCESS CODE)
ver the next few pages you’ll
Olearn how to block channels
and get a better understanding of
the rating terms for certain
programming. First, let’s start by
learning how to set a personal
access code:
INPUT
ON
OFF
ᮣ
SLEEPTIMER
SmartLock
CC
SmartLock
BEGIN
OFF
ᮣ
Press the MENU button on the
remote to display the onscreen
menu.
SETUP
ACCESS CODE
_ _ _ _
Press the CURSOR UP ▲ or
CURSOR DOWN ▼ buttons
until the words SmartLock are
highlighted.
2
Press the CURSOR RIGHT
ᮣ button to display the
SmartLock Access Code screen.
SmartLock
STATUS/EXIT
ER
8
CH
VOL
VOL
ACCESS CODE
X X X X
MENU
1
MUTE
CH
A/CH
Using the NUMBERED but-
tons, enter 0, 7, 1, 1. “XXXX”
appears on the Access Code screen
as you press the numbered buttons.
3
51
2
5
8
0
3
6
6
4
“INCORRECT CODE” will
appear on the screen, and you will
need to enter 0, 7, 1, 1 again.
7
9
CC
4
SmartLock
7
Press the CURSOR DOWN ▼
button until the words CHANGE
CODE are highlighted.
ACCESS CODE
_ _ _ _
Press the CURSOR RIGHT ᮣ
button to change your personal
Access Code.
INCORRECT CODE
“Next enter a “new” 4 digit
code using the NUMBERED but-
tons. The screen will then ask you
to confirm the code you just
entered. Enter your new code
again. “XXXX” will appear when
you enter your new code.
BLOCK
ᮣ
ᮣ
CHANGE CODE X X X X
CHANGE CODE
Press the STATUS/EXIT
button to save the new code
in the TV’s memory.
Continue to the next page to learn
how to block channels from viewing.
NOTE: The 0,7,1,1 access code shown
on this page is the default code or a
way to reset the code when the current
access code is not known.
CONFIRM CODE X X X X
Parents - it isn’t possible for your child
to unblock a channel without knowing
your access code or changing it to a
new one. If your code changes, and you
didn’t change it, then you know it’s been
altered by someone else and blocked
channels have been viewed.
Download from Www.Somanuals.com. All Manuals Search And Download.
UNDERSTANDING THE SMARTLOCKTM CONTROL (BLOCK CHANNEL)
fter your personal access code
Ahas been set (see previous
page), you are now ready to select
the channels you want to block out
or censor.
INPUT
ᮣ
OFF
ᮣ
BEGIN
SLEEPTIMER
SmartLock
CC
SmartLock
Press the MENU button on the
remote to show the onscreen menu.
OFF
ᮣ
SETUP
Press the CURSOR UP ▲
or CURSOR DOWN ▼ button
until the words SmartLock are
highlighted.
ACCESS CODE
_
_
_
_
SmartLock
Press the CURSOR RIGHT
ᮣ button to display the
2
WER
STATUS/EXIT
6
SmartLock Access screen.
1
3
ACCESS CODE
X X X X
CH
VO
VOL
Enter the correct access code
number. “XXXX” shows on the
Access Code display as you press
the NUMBERED buttons.
MENU
MUTE
CH
A/CH
2
5
8
0
3
6
51
Press the CURSOR UP ▲ or
DOWN ▼ buttons until the word
BLOCK is highlighted. Press the
CURSOR RIGHT ᮣ button then
highlight CHANNELS
8
4
BLOCK
ᮣ
ᮣ
CHANGE CODE
7
CC
SL
4
7
BLOCKED.
BLOCKING OPTIONS
ᮣ
Press the CURSOR RIGHT ᮣ
button. Three options will be dis-
played; CHANNEL, LOCK or
CLEAR ALL.
CHANNELS BLOCKED ᮣ
MOVIE RATINGS
ᮣ
With CHANNEL highlighted,
use the NUMBERED buttons to
enter the channel number you wish
to block.
CHANNEL 5 BLOCKED
BY CHANNEL BLOCKING
ENTER CODE TO VIEW
CHANNEL
LOCK
5
YES
ᮣ
CHANNEL
LOCK
5
Use the CURSOR DOWN ▼
button to highlight the word
LOCK, then press the CURSOR
RIGHT ᮣ button to select YES
(block) or NO (do not block). The
channel chosen is now blocked from
viewing.
NO
CLEAR ALL
CLEAR ALL
ᮣ
_
_
_
_
When a blocked channel is viewed, this is what the screen will display. To view the blocked channel,
simply enter the current access code. Note: Once the access code is entered ALL blocked channels will
be viewable until the TV is powered off. Once the set is turned off and then back on the previously
blocked channels will again be blocked.
Repeat steps 7 and 8 for any other
channels you wish to block from
viewing.
To clear blocked channels
follow the steps below:
Press the CURSOR DOWN ▼
button until the words CLEAR
ALL are highlighted, then press the
CURSOR RIGHT ᮣ button.
Note: When the CLEAR
ALL option is selected, the
CHANNEL option will dis-
play ALL.
CHANNEL
LOCK
ALL
NO
CHANNEL
LOCK
5
YES
ᮣ
If at this point if you change
the LOCK option to YES,
ALL channels will be blocked
from viewing.
The screen will read “ALL
UNBLOCKED” for a moment.
At this point ALL the previously
blocked channels will be unblocked.
ALL UNBLOCKED
CLEAR ALL
Download from Www.Somanuals.com. All Manuals Search And Download.
UNDERSTANDING THE SMARTLOCKTM CONTROL (BLOCKING OPTIONS)
martLock offers the viewer other
Sblocking features as well. With
these Blocking Option features, the
censoring can be turned ON or
OFF.
INPUT
ᮣ
OFF
ᮣ
BEGIN
SLEEPTIMER
SmartLock
CC
SmartLock
Press the MENU button on
the remote to display the onscreen
menu.
OFF
ᮣ
ACCESS CODE
SETUP
_
_
_
_
Press the CURSOR UP ▲ or
CURSOR DOWN ▼ buttons until
the words SmartLock are
highlighted.
SmartLock
6
Press the CURSOR RIGHT
ᮣ button to display the SmartLock
Access Code screen.
2
TATUS/EXIT
ER
1
ACCESS CODE
X X X X
CH
MENU
CH
VO
VOL
MUTE
A/CH
Using the NUMBERED
buttons on the remote, enter your
personal Access Code.
3
1
4
2
5
8
0
3
6
5
7
With the word BLOCK
highlighted, Press the CURSOR
RIGHT ᮣ button.
7
9
CC
S
BLOCK
CHANGE CODE
ᮣ
ᮣ
4
Scroll the menu using the
CURSOR UP ▲ or CURSOR
DOWN ▼ buttons until the words
BLOCKING OPTIONS are
highlighted.
MASTER DISABLE
BLOCK UNRATED
ON
ON
MASTER DISABLE OFF
BLOCKING OPTIONS
CHANNELS BLOCKED ᮣ
MOVIE RATINGS
ᮣ
Press the CURSOR RIGHT ᮣ
button to display the Blocking
Options (MASTER DISABLE,
BLOCK UNRATED, or BLOCK
NO RATING). When highlighted,
each feature can be turned ON or
OFF using the CURSOR RIGHT
ᮣ or CURSOR LEFT ᮤ buttons
on the remote.
OR
BLOCK UNRATED
OFF
BLOCK NO RATING ON
BLOCK NO RATING OFF
ᮣ
CHANNEL 2 0 BLOCKED
BY CONTENT ADVISORY
CANNOT DECODE RATING
ENTER CODE TO VIEW
If the BLOCK UNRATED or BLOCK NO RATINGS
controls are turned ON, all unrated programs and pro-
grams containing NO content advisory data will display
the screen shown to the left. To watch the channel enter
your access code, or change the BLOCK UNRATED
and BLOCK NO RATINGS back to OFF.
–
–
–
–
BLOCKING OPTIONS:
MASTER DISABLE: This is what might be called the “master switch” for SmartLock. When in the ON position, ALL block-
ing/censoring is turned off (or disabled). When in the OFF position, ALL blocking based on specifically blocked settings will
take place.
BLOCK UNRATED: ALL unrated programs based on the Movie Ratings or Parental (TV) Guidelines can be blocked if this
feature is set to ON and the MASTER DISABLE feature is set to OFF.
BLOCK NO RATINGS: ALL programming with NO content advisory data can be blocked if this feature is set to ON and the
MASTER DISABLE feature is set to OFF.
Download from Www.Somanuals.com. All Manuals Search And Download.
UNDERSTANDING THE SMARTLOCKTM CONTROL (MOVIE RATINGS)
SMART
HELP
here are two types of program
Tratings within the SmartLock
feature. One is based on the Movie
Industry ratings while the other is
based on the TV Industry ratings.
Both can be used to block or censor
programming that has been rated in
either manner.
Remember:
Selecting to
block any rating
will cause all the
higher ratings to
also be blocked
automatically.
ᮣ
INPUT
SLEEPTIMER
SmartLock
CC
OFF
SmartLock
ᮣ
Let’s first look at the Movie Rating
options of SmartLock:
OFF
ᮣ
SETUP
ACCESS CODE
_ _ _ _
BEGIN
Press the MENU button on the
remote to display the onscreen
menu.
SmartLock
6
2
Press the CURSOR UP ▲ or
CURSOR DOWN ▼ buttons until
the words SmartLock are
highlighted.
STATUS/EXIT
ER
1
ACCESS CODE
X X X X
CH
VO
VOL
MENU
CH
MUTE
A/CH
Press the CURSOR RIGHT
ᮣ button to display the SmartLock
Access Code screen.
3
1
4
2
5
8
0
3
6
5
7
BLOCK
ᮣ
ᮣ
CHANGE CODE
Using the NUMBERED but-
tons on the remote, enter your
Personal Access Code.
7
9
CC
4
With the word BLOCK high-
lighted, Press the CURSOR
RIGHT ᮣ button.
ᮣ
ᮣ
ᮣ
ᮣ
BLOCKING OPTIONS
CHANNELS BLOCKED
MOVIE RATINGS
Scroll the menu using the
CURSOR UP ▲ or CURSOR
DOWN ▼ buttons until the words
MOVIE RATINGS are highlight-
ed.
PARENTAL GUIDELINE
PG
OFF
PG-1 3
R
OFF
ON
ON
ON
Press the CURSOR RIGHT ᮣ
button to display the MOVIE
RATINGS (G, PG, PG-13, R,
NC17, or X).
NC-1 7
X
CHANNEL 5 BLOCKED BY
CHANNEL ADVISORY
MOVIE RATING R
When highlighted, all these options
can be turned ON (which will allow
blocking) or OFF (which will allow
viewing).
NOTE: When a rating is turned ON, all
higher ratings will automatically be turned
ON. To turn them OFF, each will have to be
set individually. (i.e., R blocked manually,
NC-17 and X will be blocked automatically).
ENTER CODE TO VIEW
_ _ _ _
Using the CURSOR RIGHT ᮣ or
CURSOR LEFT ᮤ buttons on the
remote to turn the rating option ON
or OFF.
Screen will display a message when programming is
blocked by the Movie Rating feature. To unblock, turn
the Movie Rating OFF, or enter your personal access
code. Entering the code will unblock ALL blocked
Movie Ratings until the TV is turn off. Then the
blocked ratings will be reset to ON.
Download from Www.Somanuals.com. All Manuals Search And Download.
UNDERSTANDING THE SMARTLOCKTM CONTROL (PARENTAL GUIDELINE)
SMART
HELP
his portion of the SmartLock
Tfeatures cover program ratings
based on the TV Industry rating
system. This is know as Parental
Guideline within SmartLock.
Remember:
Selecting to
block any rating
will cause all the
higher ratings to
also be blocked
automatically.
After selecting the SmartLock
feature and entering your personal
access code, the BLOCK/CHANGE
CODE screen appears;
BLOCK
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
BLOCKING OPTIONS
CHANNELS BLOCKED
MOVIE RATINGS
CHANGE CODE
BEGIN
PARENTAL GUIDELINE
With the word BLOCK high-
lighted, Press the CURSOR
RIGHT ᮣ button.
ᮣ
TV-Y7
TV-G
Scroll the menu using the
CURSOR UP ▲ or CURSOR
DOWN ▼ buttons until the words
PARENTAL GUIDELINE are
highlighted.
2
4
OFF
ᮣ
STATUS/EXIT
WER
3
TV-PG
TV-1 4
TV-MA
1
CH
MENU
CH
ᮣ
VOL
VOL
ᮣ
MUTE
A/CH
Press the CURSOR RIGHT ᮣ
button to display the Parental
(TV) Guideline (TV-Y, TV-Y7,
TV-G, TV-PG, TV-14, or TV-
MA).
1
4
2
5
8
0
3
6
9
TV RATING SUB MENUS:
7
CC
SLEEP
When highlighted, the TV-Y and
TV-G can be turned ON (which
will allow blocking) or OFF (which
will allow viewing), of these rated
programs.
TV-Y
OFF
ᮣ
TV-Y7
TV-G
Y7
ON
ON
OFF
FV
ᮣ
TV-PG
The ratings of TV-Y7, TV-PG,
TV-14, TV-MA can be
customized to block V (violence),
FV (fantasy violence), S (sexual
situations), L (coarse language),
or D (suggestive dialogue).
ᮣ
PG
D
ON
ON
ON
ON
ON
TV-Y7
TV-G
OFF
ᮣ
Using the CURSOR RIGHT ᮣ or
CURSOR LEFT ᮤ buttons on the
remote to turn the rating option ON
or OFF.
L
TV-PG
TV-1 4
TV-MA
ᮣ
S
ᮣ
V
TV-Y - (All children -- This program is designed to be appropriate for all children.)
Designed for a very young audience, including children ages 2-6. This type of pro-
gramming is not expected to frighten younger children.
1 4
D
L
ON
ON
ON
ON
ON
TV-G
OFF
ᮣ
TV-PG
TV-1 4
TV-MA
TV-Y7 - (Directed to Older Children -- This program is designed for children age 7
and above.) It may be more appropriate for children who have acquired the develop-
ment skills needed to distinguish between make-believe and reality. This program-
ming may include mild fantasy and comic violence (FV).
ᮣ
S
ᮣ
V
TV-G - (General Audience -- Most parents would find this program suitable for all
ages.) This type of programming contains little or no violence, no strong language
and little or no sexual dialogue or situations.
TV-PG - (Parental Guidance Suggested -- This program contains material that par-
ents may find unsuitable for younger children.)This type of programming contains
one or more of the following: Moderate violence (V), some sexual situations (S),
infrequent coarse language (L), or some suggestive dialogue (D).
ᮣ
ᮣ
ᮣ
TV-PG
TV-1 4
TV-MA
MA
L
ON
ON
ON
ON
TV-14 - (Parents Strongly Cautioned -- This program contains some material that
many parents would find unsuitable for children under 14 years of age.) This type of
programming contains one or more of the following: intense violence (V), intense
sexual situations (S), strong coarse language (L), or intensely suggestive dialogue (D).
S
TV-MA - (Mature Audience Only -- This program is specifically designed to be
viewed by adults and therefore may be unsuitable for children under 17.) This type of
programming contains one or more of the following: graphic violence (V), explicit
sexual situations (S), or crude indecent language (L).
V
Download from Www.Somanuals.com. All Manuals Search And Download.
UNDERSTANDING THE SMARTLOCKTM CONTROL (REVIEW SCREEN)
ow that you’ve learn how to
Nblock channels or censor your
viewing using the Movie Ratings or
Parental (TV) Guidelines let’s
review what you’ve done. The
SmartLock Review feature allows
you to see what has been blocked.
Whenever the Menu button is
pressed the onscreen menu will be
displayed with the SmartLock
Review highlighted.
CC
OFF
ᮣ
CHANNELS BLOCKED
-- -- -- -- --
SETUP
ᮣ
SmartLock REVIEW
BRIGHTNESS
COLOR
MOVIE RATINGS
-- -- -- -- --
30
30
PARENTAL GUIDELINE
-- -- -- -- --
BEGIN
BLOCK UNRATED
OFF
Press the MENU button on the
remote to show the onscreen menu.
SmartLock REVIEW will be high-
lighted.
BLOCK NO RATING OFF
STATUS/EXIT
POWER
Press the CURSOR RIGHT
ᮣ button and the SmartLock
Review Menu will appear.
1
2
CH
MENU
CH
SmartLock DISABLED
VO
VOL
MUTE
A/CH
This menu will display what chan-
nels have been blocked; what
Movie Ratings have been blocked;
what Parental (TV Ratings)
Guidelines have been blocked. This
review screen will also display that
status of Unrated and No Rating
settings. If the Master Disable
feature has been turned ON, the
SmartLock Review screen will
display “SmartLock DISABLED”.
1
4
2
5
8
0
3
6
SmartLock DISABLED will appear in the
SmartLock Review screen if the SmartLock
Disable feature is set to ON.
7
9
CC
SLEEP
CHANNELS BLOCKED - Shows all blocked channels that where set with-
in the CHANNELS BLOCKED feature. Up to 5 channels may be blocked at
one time.
MOVIE RATINGS - Shows all blocked Movie Ratings that were set within
the MOVIE RATINGS feature. All or some may be blocked at one time.
Note: If a lower rating is blocked; this will automatically cause the higher
ratings to be blocked also. (i.e., if R is set to be blocked, X will automatical-
ly be blocked also.)
CHANNELS BLOCKED
5 1 0 1 2 3 2 4 5
MOVIE RATINGS
PARENTAL GUIDELINE - Shows all blocked TV Ratings that were set
within the PARENTAL GUIDELINES feature. All or some may be blocked
at one time. Note: If a lower rating is blocked; this will automatically cause
the higher ratings to be blocked also. (i.e., if TV-14 is set to be blocked,
TV-MA will automatically be blocked.) Parental Guidelines also have sub
ratings for Violence (V), Fantasy Violence (FV), Sexual Situations (S),
Coarse Language (L), and Suggestive Language (D). If the main rating is
turned off but the sub rating is turned ON, the program will be blocked but
the rating will not appear within the SmartLock Review menu.
-- -- -- R X
PARENTAL GUIDELINE
-- -- -- 1 4 MA
BLOCK UNRATED - Shows ON or OFF depending on the status of the
BLOCK UNRATED feature. Based on the Movie Ratings or Parental (TV)
Guidelines.
BLOCK UNRATED
ON
BLOCK NO RATING - Shows ON or OFF depending on the status of the
BLOCK NO RATING feature. Based on programming with NO content
advisory data.
BLOCK NO RATING ON
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO SET THE TV FOR STEREO PROGRAMS
our TV can detect a stereo sig-
Ynal and will set itself automat-
ically so the stereo sound can be
heard. However, there may be
occasions when you might want to
set the TV to mono. The following
steps describe how to change the
SOUND control:
NOISE REDUCTION
VOLUME
ON
1 5
BEGIN
Press the MENU button on
the remote to show the onscreen
menu.
NOISE REDUCTION
VOLUME
ON
1 5
SOUND
MONO
ᮣ
INPUT
SOUND
STEREO
ᮣ
SLEEPTIMER
OFF
Press the CURSOR UP ▲
or CURSOR DOWN ▼ button
until the word SOUND is high-
lighted.
INPUT
SLEEPTIMER
OFF
Press the CURSOR RIGHT
ᮣ or CURSOR LEFT ᮤ but-
tons to choose between STEREO
or MONO.
2
TATUS/EXIT
ER
SMART HELP
1
CH
MENU
CH
Remember: If stereo is
not present on a selected
show and the TV is placed in the
STEREO mode, the sound com-
ing from the set will remain
monaural (mono).
VO
VOL
With STEREO selected, the tele-
vision will reproduce any stereo
broadcast signal it receives.
Please note that you can force a
stereo broadcast signal to MONO,
but you cannot force a mono
broadcast signal to stereo.
MUTE
A/CH
3
1
4
2
5
8
0
3
6
7
9
CC
SLEEP
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE TV VOLUME BAR CONTROL
se the Volume Bar control to see
Uthe TV’s volume level settings
on the TV screen. The Volume Bar
will be seen each time the VOLUME
buttons (on the TV or remote) are
pressed.
TINT
0
ON
1 5
NOISE REDUCTION
VOLUME
SOUND
INPUT
STEREO
BEGIN
ᮣ
Press the MENU button to dis-
play the onscreen menu.
Press the CURSOR UP ▲ or
CURSOR DOWN ▼ buttons until
the word VOLUME is highlighted.
2
STATUS/EXIT
ER
1
Press the CURSOR RIGHT ᮣ
button to increase the TV’s volume
or the CURSOR LEFT ᮤ button to
decrease the sound.
CH
MENU
CH
VO
VOL
MUTE
A/CH
3
1
4
2
5
8
0
3
6
7
9
CC
SLEEP
OR
VOLUME
1 5
Note: Pressing the VOL
(+) or (–) buttons will
also allow you to adjust
the sound level of the
TV. A Volume Bar
adjustment will appear
onscreen. Press the (+)
to increase the volume
and the (–) button to
decrease the volume.
STATUS/EXIT
POWER
1
CH
MENU
CH
VOL
VOL
MUTE
A/CH
1
4
2
5
8
0
3
6
7
9
CC
SLEEP
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE INPUT CONTROL (A/V INPUTS)
AUDIO/VIDEO INPUTS
The TV’s Audio/Video Input jacks
are for direct picture and sound
connections between the TV and
a VCR (or similar device) that
has Audio/Video Output jacks.
1
BEGIN
75 ⍀
75
⍀
V
ID
E
O
1
L
/MO
N
O
A
U
D
IO
R
i
n
VIDEO
Connect the VIDEO (yellow)
CABLE to the VIDEO IN jack
on the back of the TV. Then con-
nect the AUDIO (red and white)
CABLES to the AUDIO (left and
right) IN jacks on the rear of the
TV.
L/MONO
AUDIO
R
BACK OF TV
in
AUDIO IN
2
(RED/WHITE)
IF YOU ARE USING A
MONO DEVICE, USE
ONLY THE AUDIO
L/MONO JACK. IF A
DUMMY JACK IS
PLUGGED INTO THE
AUDIO R, NO SOUND
WILL BE HEARD.
Connect the VIDEO (yellow)
CABLE to the VIDEO OUT jack
on the back of the VCR. Then
connect the AUDIO (red and
white) CABLES to the AUDIO
(left and right) OUT jacks on the
rear of the VCR.
ANTENNA
IN
OUT
AUDIO
IN
OUT
VIDEO
IN
VCR
(EQUIPPED WITH
VIDEO AND AUDIO
OUTPUT JACKS)
BACK OF VCR
R
L
ANTENNA
OUT
3
Turn the VCR and the TV
ON.
VOLUME
1 5
Press the MENU button on
the remote to display the
onscreen menu.
SOUND
STEREO
ᮣ
INPUT
SLEEPTIMER
SmartLock
OFF
ᮣ
Press the CURSOR UP ▲ or
CURSOR DOWN ▼ buttons
until the word INPUT is high-
lighted.
ANTENNA
EXT 1
Press the CURSOR RIGHT
ᮣ or CURSOR LEFT ᮤ button
to display the picture/sound menu
(ANTENNA, EXT 1). Use the
CURSOR UP ▲ or DOWN ▼
buttons to select.
5
TATUS/EXIT
ER
4
6
CH
VO
VOL
MENU
MUTE
CH
A/CH
1
4
2
5
8
0
3
6
Now your ready to place a prere-
corded video tape in the VCR and
press the PLAY ᮣ button.
7
9
CC
SLEEP
Download from Www.Somanuals.com. All Manuals Search And Download.
TIPS IF SOMETHING ISN'T WORKING
lease make these simple
Pchecks before calling for ser-
vice. These tips can save you
time and money since charges for
TV installation and adjustment of
customer controls are not cov-
ered under your warranty.
CAUTION: A video source (such as a video game, Compact Disc Interactive - CDI, or
TV information channel) which shows a constant non-moving pattern on the TV screen,
can cause picture tube damage. When your TV is continuously used with such a source
the pattern of the non-moving portion of the game (CDI, etc.) could leave an image
permanently on the picture tube. When not in use, turn the video source OFF.
Regularly alternate the use of such video sources with normal TV viewing.
• Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert plug into
outlet and push POWER button again.
• Check that outlet is not on a wall switch. Be sure fuse is not blown on AC Power strip.
No Power
No Picture
• Check antenna connections. Are they properly secured to the TV's ANT/CABLE plug?
• Check the TUNER control for CABLE or ANTENNA setting.
• Check Audio/Video jack connections if using an accessory device.
• Check the VOLUME buttons.
• Check the MUTE button on the remote control.
• Check Audio/Video jack connections if using an accessory device.
No Sound
• Check batteries. Replace with AAA Heavy Duty (Zinc Chloride) or Alkaline batteries
if necessary.
• Clean the remote and the remote sensor window on the TV.
• Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert plug into
outlet and push POWER button again. Be sure fuse is not blown on AC Power strip.
• Check to be sure TV outlet is not on a wall switch.
Remote Does Not
Work
• Repeat channel selection.
• Add desired channel numbers (CHANNEL control) into TV memory.
• Check to be sure the TUNER control is set to the CABLE.
TV Displays Wrong
Channel or No
Channels Above 13
Cleaning and Care
• To avoid possible shock hazard be sure the TV is unplugged from the electrical outlet before cleaning.
• When cleaning the TV screen take care not to scratch or damage the screen surface (avoid wearing jewelry or using
anything abrasive). Wipe the front screen with a clean cloth dampened with water. Use even, easy, vertical strokes when
cleaning.
• Gently wipe the cabinet surfaces with a clean cloth or sponge dampened in a solution of cool clear water. Use a clean
dry cloth to dry the wiped surfaces.
• Never use thinners, insecticide sprays, or other chemicals on or near the cabinet, as they might cause permanent marring
of the cabinet finish.
Download from Www.Somanuals.com. All Manuals Search And Download.
GLOSSARY TO TELEVISION TERMS
Coaxial Cable • A single solid antenna wire normally matched
with a metal plug (F-type) end connector that screws (or pushes)
directly onto a 75 Ohm input found on the Television or VCR.
Programming • The procedure of adding or deleting channel
numbers into the Television’s memory circuits. In this way the
Television “remembers’’ only the locally available or desired
channel numbers and skips over any unwanted channel num-
bers.
Closed Caption • Broadcast standard which allows you to read
the voice content of television programs on the TV screen.
Designed to help the hearing impaired this feature uses onscreen
"text boxes" to show dialogue and conversations while the TV
program is in progress.
Remote Sensor Window • A window or opening found on the
Television control panel through which infrared remote control
command signals are received.
Direct Audio/Video Inputs • Located on the rear of the TV
Setup Mode • Automatic feature control settings made by the
these connectors (RCA phono type plug) are used for the input
TV. Designed for first time setup and use. Settings for signal
of audio and video signals. Designed for use with VCRs (or other connections (antenna or cable TV), plus channel program mem-
accessories) in order to receive higher picture resolution and
offer sound connection options.
ory are held in the TV's memory (even if the set is unplugged
and moved to a new location.)
Identify • Method by which a remote control searches and finds
an operating code for another product (such as a VCR or Cable
Converter). Once the code has been "identified" then the TV
remote can operate and send commands to the other product.
Status • Allows the user to quickly confirm what channel num-
ber is currently being viewed. Status can also be used to clear
the Television of on screen displays or information (rather than
waiting for the displays to “time out” or automatically disap-
pear from the screen).
On Screen Displays (OSD) • Refers to the wording or messages
generated by the television (or VCR) to help the user with specif- Twin Lead Wire • The more commonly used name for the two
ic feature controls (color adjustment, programming, etc.).
strand 300 Ohm antenna wire used with many indoor and out-
door antenna systems. In many cases this type of antenna wire
requires an additional adapter (or balun) in order to connect to
the 75 Ohm Input terminals designed into the more recent
Televisions and VCRs.
Menu • An onscreen listing of feature controls shown on the
Television screen that are made available for user adjustments.
Multichannel Television Sound (MTS) • The broadcast stan-
dard that allows for stereo sound to be transmitted with the TV
picture.
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
Accessories/Optional . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-7
Adapter Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7
Add/Delete Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Audio/Video Input Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Battery Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Cable TV Connections/Settings . . . . . . . . . . . . . . . . . . . . .5, 11
Channel Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 13
Closed Captioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Controls/TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Controls/Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8, 9
External Control (Input Naming) . . . . . . . . . . . . . . . . . . . . . .14
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Glossary TV Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Input Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Language Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Memory/Program Channels . . . . . . . . . . . . . . . . . . . . . . 12, 13
Menu Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Minus(-)/Plus (+) Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Picture Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Picture Noise Reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Precautions/Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . .3, 30, 36
Programming Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-9
Requesting Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33-34
RF Coaxial Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-7
Safety/Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . .3, 30, 36
Secondary Audio Program (SAP) . . . . . . . . . . . . . . . . . . . . .27
Sensor Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Set Up/First Time Use . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-14
Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
SmartLock Access Code Feature . . . . . . . . . . . . . . . . . . . . . .21
SmartLock Block Channel Feature . . . . . . . . . . . . . . . . . . . .22
SmartLock Blocking Options . . . . . . . . . . . . . . . . . . . . . . . .23
SmartLock Blocking using the Movie/TV Ratings . . . . . .24-25
SmartLock Review . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Status Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Stereo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Alternate Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Tips for Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30, 33-34
VCR/TV Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Volume Bar Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Download from Www.Somanuals.com. All Manuals Search And Download.
Philips Consumer Electronics Company
Factory Service Center Locations
See Reverse Side for More Details.
Detroit/Toledo
•
Cleveland/
•
•
N Ohio •
•
Chicago
★ Columbus
•
San Francisco/Metro Area
★ Los Angeles
★ Charlotte
•
★ Pittsburgh/WV Area
Knoxville/E Tennessee
•
•
•
Philadelphia/S New Jersey
Atlanta/N Georgia
• Dallas
★ Wash/Balt
★ Orlando
•
Houston/Galveston
Beaumont/Austin
San Antonio
Tampa/W Florida
★ Ft. Myers/SW Florida
•
★ Indicates In-Home Service Only
1-800-242-9225
★ Miami/SE Florida
• Indicates In-Home/Carry-In Service
NOTE: If you reside in one of our Philips Factory Service Branch areas (see directory on back), you can contact the nearest Service Branch to
obtain efficient and expedient repair for your product. If your product is In-Warranty, you should have proof-of-purchase to ensure No Charge
Service. For Out-of-Warranty service, call the location nearest you.
NOTA: Si vous résidez dans une des régions desservies par une succursale de service après vente du fabricant Philips (voir liste ci-dessous),
vous pourrez contacter la branche de service après vente la plus près de chez vous pour obtenir un service après vente rapide et efficace. Si le
produit est sous garantie, il suffira de présenter une preuve d`achat pour bénéficier d'un service sans frais. Pour les produits non couverts par la
garantie, contactez le centre le plus près de chez vous.
NOTA: Si Ud. reside en una de nuestras zonas para sucursales Philips de servicio al de fábrica (ver directorio más abajo), Ud. puede comunicarse
con la sucursal de servicio más cercana para obtener una reparación oportuna y eficaz de su producto. Si su producto está todavía bajo garan-
tía, Ud. debe presentar comprobante de compra para no ocasionar ningunos cargos por servicio. Para servicio después del vencimiento de la
garantía, llame al lugar más cercano de los abajo indicados.
In Canada
How you can obtain efficient and expedient carry-in, mail-in, or in-home service for your product
Please contact Philips at
1-800-661-6162 (French speaking)
1-800-363-7278 (English speaking)
Au Canada
Comment obtenir le service après-vente pour les produits apportés ou envoyés par la poste à notre centre de service ou le service à domicile
Veuillez contacter philips á:
1-800-661-6162 (Francophone)
1-800-363-7278
En el Canadá
Cómo recibir servicio efficiente para su producto, en persona, por correo o a domicillo
Favor de comunicarse con Philips al:
1-800-661-6162 (francófono)
1-800-363-7278 (anglófono)
EL4482-3 Rev. AA
3135 015 07541
MAC2929 1/99
Download from Www.Somanuals.com. All Manuals Search And Download.
QUALITY SERVICE IS AS CLOSE AS YOUR TELEPHONE! SIMPLY LOOK OVER THE LIST BELOW FOR THE NUMBER OF A FACTORY SERVICE CENTER
NEAR YOU. YOUR PRODUCT WILL RECEIVE EFFICIENT AND EXPEDIENT CARRY-IN, MAIL-IN, OR IN-HOME SERVICE, AND YOU WILL RECEIVE PEACE OF MIND,
KNOWING YOUR PRODUCT IS BEING GIVEN THE EXPERT ATTENTION OF PHILIPS’ FACTORY SERVICE. AND, IF THE PHONE NUMBER LISTED FOR YOUR AREA
IS LONG DISTANCE, CALL 1-800-242-9225 FOR FACTORY SERVICE.
COMMENT OBTENIR NOTRE SERVICE APRÈS VENTE RAPIDE ET EFFICACE SOIT PAR COURRIER, À DOMICILE, OU EN SE PRÉSENTANT À UN CENTRE DE SERVICE PHILIPS. PLUS DE 600 CENTRES
DE RÉCEPTION DE PRODUITS À RÉPARER À TRAVERS LE PAYS: CONTACTER LE CENTRE DE SERVICE AUX CONSOMMATEURS LE PLUS PROCHE POUR SAVOIR L’EMPLACEMENT DE CES DÉPÔTS
DANS UN RAYON DE 50 À 75 MILES (80 KM À 120 KM) DU CENTRE DE SERVICE LOCAL.
CÓMO OBTENER UN SERVICIO OPORTUNO Y EFICIENTE POR CORREO, EN CASA O EN PERSONA PARA SU PRODUCTO A TRAVÉS DE UN CENTRO PHILIPS DE SERVICIO. MAS DE 600 SITIOS POR
TODO EL PAIS PARA LA RECEPCION DE PRODUCTOS NECESITADOS DE REPARACIONES: COMUNICARSE CON EL CENTRO DE SERVICIO DE FABRICA MAS CERCANO PARA ESTOS LUGARES DENTRO
DE UN RADIO DE 80 A 120 KM (50 A 75 MILLAS) DEL CENTRO DE SERVICIO LOCAL.
GEORGIA
CENTRAL U.S.A.
ILLINOIS
Philips Factory Service of Georgia
200 N. Cobb Pkwy., Suite 120
Marietta, GA 30062
Philips Factory Service Central US
950 Keynote Circle
Brooklyn Heights, OH 44131
(216) 741-3334
Philips Factory Service of Illinois
1279 W. Hamilton Pkwy.
Itasca, IL 60143
(770) 795-0085
(630) 775-0990
FLORIDA
MICHIGAN
TENNESSEE
Philips Factory Service of Florida
1911 US Highway 301 North
Tampa, FL 33619
Philips Factory Service of Michigan
25173 Dequindre
Madison Heights, MI 48071
(248) 544-2110
Philips Factory Service of East Tennessee
6700 D Papermill Rd.
Knoxville, TN 37919
(813) 621-8181
(423) 584-6614
WESTERN U.S.A.
DALLAS AREA
MID-ATLANTIC
Philips Factory Service Western Region
681 East Brokaw Rd.
San Jose, CA 95112
Philips Factory Service of Dallas
415 N. Main Street, #107
Euless, TX 76040
Philips Factory Service Mid-Atlantic
352 Dunks Ferry Rd.
Bensalem, PA 19020
(215) 638-7500
(408) 436-8566
(713) 682-3990
TEXAS
Philips Factory Service of Texas
1110 N. Post Oak Rd., Suite 100
Houston, TX 77055
(713) 682-3990
MAC2929 1/99
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED W ARRANTY
CO LO R TELEVISIO N
90 Days Free Labor
One Year Free Replacement of Parts (Two Years Free Replacement on Color Picture Tube)
This product can be repaired in-home.
W HO IS CO VERED?
MAKE SURE YO U KEEP...
You must have proof of purchase to receive warranty service. A sales
receipt or other document showing that you purchased the product is
considered proof of purchase.
Please keep your sales receipt or other document showing proof of
purchase. Attach it to this owner’s manual and keep both nearby.
Also keep the original box and packing material in case you need to
return your product.
W HAT IS CO VERED?
BEFO RE REQ UESTING SERVICE...
Please check your owner’s manual before requesting service.
Adjustments of the controls discussed there may save you a service
call.
Warranty coverage begins the day you buy your product. For 90 days
thereafter, all parts will be repaired or replaced free, and labor is free.
From 90 days to one year from the day of purchase, all parts will be
repaired or replaced free, but you pay for all labor charges. From one
to two years from the day of purchase, you pay for the replacement or
repair of all parts except the picture tube, and for all labor charges.
After two years from the day of purchase, you pay for the replacement
or repair of all parts, and for all labor charges.
TO GET W ARRANTY SERVICE IN U.S.A.,
PUERTO RICO O R U.S. VIRGIN ISLANDS...
Contact a Philips factory service center (see enclosed list) or autho-
rized service center to arrange repair.
All parts, including repaired and replaced parts, are covered only for
the original warranty period. When the warranty on the product
expires, the warranty on all replaced and repaired parts also expires.
(In U.S.A., Puerto Rico and U.S. Virgin Islands, all implied warranties,
including implied warranties of merchantability and fitness for a partic-
ular purpose, are limited in duration to the duration of this express
warranty. But, because some states do not allow limitations on how
long an implied warranty may last, this limitation may not apply to
you.)
W HAT IS EXCLUDED?
Your warranty does not cover:
•
labor charges for installation or setup of the product, adjustment of
customer controls on the product, and installation or repair of
antenna systems outside of the product.
TO GET W ARRANTY SERVICE IN CANADA...
Please contact Philips at:
•
product repair and/or part replacement because of misuse, acci-
dent, unauthorized repair or other cause not within the control of
Philips Consumer Electronics Company.
1-800-661-6162 (French Speaking)
1-800-363-7278 (English Speaking)
•
•
reception problems caused by signal conditions or cable or antenna
systems outside the unit.
a product that requires modification or adaptation to enable it to
operate in any country other than the country for which it was
designed, manufactured, approved and/or authorized, or repair of
products damaged by these modifications.
(In Canada, this warranty is given in lieu of all other warranties. No
other warranties are expressed or implied, including any implied war-
ranties of merchantability or fitness for a particular purpose. Philips is
not liable under any circumstances for any direct, indirect, special, inci-
dental or consequential damages, howsoever incurred, even if notified
of the possibility of such damages.)
•
incidental or consequential damages resulting from the product.
(Some states do not allow the exclusion of incidental or consequen-
tial damages, so the above exclusion may not apply to you. This
includes, but is not limited to, prerecorded material, whether copy-
righted or not copyrighted.)
REMEMBER...
• a product used for commercial or institutional purposes.
Please record the model and serial numbers found on the product
below. Also, please fill out and mail your warranty registration card
promptly. It will be easier for us to notify you if necessary.
W HERE IS SERVICE AVAILABLE?
Warranty service is available in all countries where the product is offi-
cially distributed by Philips Consumer Electronics Company. In coun-
tries where Philips Consumer Electronics Company does not distribute
the product, the local Philips service organization will attempt to pro-
vide service (although there may be a delay if the appropriate spare
parts and technical manual(s) are not readily available).
MODEL # ________________________________________________
SERIAL # ________________________________________________
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
Philips Service Com pany, P.O . Box 2976, Longview, Texas 75606, (903) 242-4800
Printed in U.S.A.
Download from Www.Somanuals.com. All Manuals Search And Download.
|