USER MANUAL
Color Television
32MT3305/17
Thank you for choosing Magnavox.
Need help fast?
Read your Quick Use Guide and/or User Manual first for
quick tips that make your using your Magnavox product
more enjoyable. If you have read your instructions and still
need assistance you may access or our online help at
or
call 1-800-705-2000
while with your product.
3121 235 22421-English
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Read before operating equipment
1.
2.
3.
4.
5.
6.
7.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any of the ventilation openings. Install in accordance
with the manufacturers instructions.
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and third grounding prong.
The wide blade or third prong are provided for your safety.When
the provided plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
17. Tilt/Stability - All televisions must comply with recommended
international global safety standards for tilt and stability properties of
its cabinet design.
• Do not compromise these design standards by applying excessive
pull force to the front, or top, of the cabinet which could ultimately
overturn the product.
• Also, do not endanger yourself, or children, by placing electronic
equipment/toys on the top of the cabinet. Such items could unsus-
pectingly fall from the top of the set and cause product damage
and/or personal injury.
8.
9.
18. Wall or Ceiling Mounting - The appliance should be mount-
ed to a wall or ceiling only as recommended by the manufacturer.
19. Power Lines - An outdoor antenna should be located away from
power lines.
20. Outdoor Antenna Grounding - If an outside antenna is
connected to the receiver, be sure the antenna system is grounded so
as to provide some protection against voltage surges and built up
static charges.
10. Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12.
Section 810 of the National Electric Code, ANSI/NFPA No. 70-1984,
provides information with respect to proper grounding of the mast
and supporting structure, grounding of the lead-in wire to an anten-
na discharge unit, size of grounding connectors, location of antenna-
discharge unit, connection to grounding electrodes, and requirements
for the grounding electrode. See Figure below.
Use only with a cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the appara-
tus. When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
21. Object and Liquid Entry - Care should be taken so that
objects do not fall and liquids are not spilled into the enclosure
through openings.comply with recommended international global safety
standards for tilt and stability properties of its cabinet design.
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects
have fallen into apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.
15. This product may contain lead and mercury. Disposal of these materi-
als may be regulated due to environmental considerations. For dispos-
al or recycling information, please contact your local authorities or
22. Battery Usage CAUTION - To prevent battery leakage that
may result in bodily injury, property damage, or damage to the unit:
• Install all batteries correctly, with + and - aligned as marked on
the unit.
• Do not mix batteries (old and new or carbon and alkaline, etc.).
• Remove batteries when the unit is not used for a long time.
16. Damage Requiring Service - The appliance should be serv-
iced by qualified service personnel when:
Example of Antenna Grounding
A.
B.
The power supply cord or the plug has been damaged; or
Objects have fallen, or liquid has been spilled into the appli-
ance; or
The appliance has been exposed to rain; or
The appliance does not appear to operate normally or
exhibits a marked change in performance; or
The appliance has been dropped, or the enclosure damaged.
as per NEC - National Electric Code
C.
D.
GROUND CLAMP
ANTENNA LEAD IN WIRE
E.
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
Note to the CATV system installer: This
reminder is provided to call the CATV system
installer's attention to Article 820-40 of the NEC
that provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
UIPELECTRIC SERVICE EQUIPMENT
POWERSERVICEGROUNDING ELECTRODE SYSTEM
(NEC ART 250, PART H)
connected to the grounding system of the building,as
close to the point of cable entry as practical.
Download from Www.Somanuals.com. All Manuals Search And Download.
PANEL LAYOUT
MODEL
REGISTRATION
INFORMATION
PA2NEL PA3NEL PA8NEL PA9NEL 14
PANEL
Side 1
SAFETY
INFO
PA4NEL
11 15
PANEL PANEL
PA5NEL 10
PANEL
PA1NEL
PA6NEL
13 16
PANEL PANEL
PANEL
PA7NEL 12
V E R C O
PANEL PANEL
PANEL
PANEL
PANEL
Side 2
17 18
29
24
23
LIMITED
WARRANTY
(Panel 32)
PANEL
PANEL
PANEL
PANEL
PANEL
26
19
25
30
20
x
a n P e l I n d e
a n d
PANEL PANEL PANEL PANEL
PANEL
S e q u e n c e
a n P e l
21 22 27 28
31
PANEL INDEX
Subject
Panel No. Subject
Panel No.
Alternate Channel . . . . . . . . . . . . . . . . .17 Remote Batteries Installation . . . . . . . . . .3
Audio/Video Connections
Smartlock™ Controls
Rear Audio/Video Input Jacks . . . . . . . .4
Headphone Jack . . . . . . . . . . . . . . . . . .8
Automatically Program TV . . . . . . . . . . .13
Basic Antenna Connection . . . . . . . . . . . .1
Basic Remote Operation . . . . . . . . . . . . .3
Basic Television Operation . . . . . . . . . . . .3
Cable/Cable Box Basic Connection . . .1-2
Care and Cleaning . . . . . . . . . . . . . . . . .29
Access Code . . . . . . . . . . . . . . . . . . . .19
Block All Channels . . . . . . . . . . . . . . . .21
Block Channels . . . . . . . . . . . . . . . . . .20
Clear All Blocked Channels . . . . . . . . .21
Movie Ratings . . . . . . . . . . . . . . . . . . .22
Other Blocking Options . . . . . . . . . . .24
TV Ratings . . . . . . . . . . . . . . . . . . . . . .23
Understanding Smartlock™ . . . . . . . .18
Channel Edit . . . . . . . . . . . . . . . . . . . . .14 SmartPicture™ Control . . . . . . . . . . . .26
Closed Caption Control . . . . . . . . . . . .25 SmartSound™ Control . . . . . . . . . . . . .26
Format Control . . . . . . . . . . . . . . . . . .17 SmartSurf™ Control . . . . . . . . . . . . . . .27
Language Control . . . . . . . . . . . . . . . . .11 Sound Menu Controls . . . . . . . . . . . . . .16
Limited Warranty . . . . . . . . . . . . . . . . . .30 Troubleshooting . . . . . . . . . . . . . . . . . . .28
Picture Menu Controls . . . . . . . . . . . . .15 Tuner Mode . . . . . . . . . . . . . . . . . . . . . .12
Remote Control Button Descriptions 9-10
Sleeptimer . . . . . . . . . . . . . . . . . . . . . . .25
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC ANTENNA CONNECTIONS
1
combination antenna receives normal
Antenna Connection
Abroadcast channels (VHF 2–13 and
UHF 14–69).Your connection is easy
because there is only one 75Ω (ohm)
antenna plug on the back of yourTV, and
that’s where the antenna goes.
Combination
VHF/UHF Antenna
(Outdoor or Indoor)
Monitor out
VIDEO
A
V
1
i
n
A
V
2
i
n
75‰
Y
L/Mono
AUDIO
R
S-VIDEO
Pb
Pr
COMPONENT VIDEO INPUT
If your antenna has a round
cable (75 ohm) on the end, then
you're ready to connect it to the
TV.
If your antenna has a flat,
twin-lead wire (300 ohm), you
first need to attach the antenna
wires to the screws on a 300- to
75-ohm adapter.
300 to 75Ω
Adapter
Back of TV
1
1
2
75 ⍀
Twin Lead
Wire
Push the round end of the
adapter (or antenna) onto the 75Ω
2
Round Cable
(ohm) plug on the back of the TV.
If the round end of the antenna
wire is threaded, screw it down
finger tight.
75Ω
BASIC CABLE TV CONNECTIONS
Direct Cable Connection
he CableTV input into your home
Tmay be a single (75 ohm) cable. If so,
this connection is very simple. Follow the
steps below to connect your cable signal
to your new television.
Cable signal
coming from
Cable Company
Connect the open end of the
round Cable Company sup-
Back of TV
1
plied cable to the 75Ω input on
the TV. Screw it down finger tight.
1
A
N
T
7
5
‰
M
o
n
i
t
o
r
o
u
t
A
V
1
i
n
A
V
2
i
n
VIDEO
Y
L/Mono
AUDIO
R
Pb
Pr
S-VIDEO
COMPONENT VIDEO INPUT
75Ω Round
Coaxial Cable
Jack Panel
Back of TV
Download from Www.Somanuals.com. All Manuals Search And Download.
CABLE BOX CONNECTIONS
2
Cable Signal IN
from the Cable
Company
f your cable signal uses a cable box or
Idecoder, follow the easy steps below to com-
plete the connection.
Cable Box (w/RF In/Outputs):
Output Channel Switch
Cable Box (w/RF In/Outputs):
This connection will be mono.
2
1
OUTPUT
CH
Connect the Cable Company sup-
plied cable to the signal IN(put) plug
3
4
1
CABLE
IN
TO TV
on the back of the Cable Box.
Using a separate round coaxial cable,
connect one end to the OUT(put)
(TO TV) plug on the back of the
Jack Panel Back of Cable Box
2
Cable Box.
3
Connect the other end of the
round coaxial cable to the 75Ω
A
N
T
7
5
Ω
M
o
n
i
t
o
r
o
u
t
A
V
1
i
n
A
V
2
i
n
VIDEO
Y
L/Mono
AUDIO
R
Pb
Pr
S-VIDEO
C
O
M
P
O
N
E
N
T
V
I
D
E
O
I
N
P
U
T
3
input on the back of the television.
Screw it down finger tight.
Round 75Ω
Coaxial Cable
Jack Panel Back of TV
NOTE: Set the OUTPUT CHANNEL
SWITCH on the back of the cable box to
CH 3 or 4.Tune theTV to the same chan-
nel and change channels at the cable box.
Cable Box (w/Audio/Video Outputs):
Cable Signal
IN from the
Cable Box (w/Audio/Video Outputs): Cable Company
This connection will supply Stereo sound.
24
4
Cable Box with A/V Outputs
Connect the Cable Company sup-
plied cable to the cable signal
IN(put) plug on the back of the
OUTPUT
CH
4
3
4
L
R
CABLE
IN
TO
TV
VIDEO
OUT
AUDIO
OUT
Cable Box.
Using an RCA typeVideo Cable, con-
nect one end of the cable to the
Video (or ANT, your cable box may be
labeled differently) Out jack on the
cable box and the other end to the
AV1Video Input on theTV.
Connect one end of the Audio Left
and Right Cable to the left and right
Audio Out L & R jacks on the
cable box. Connect the other end to
the AV1 Audio L & R Input jacks on
theTV.
Video Cable (Yellow)
Audio Cables
L & R (Red,White)
5
5
tor out
AV1 i
AV2 in
VIDEO
Y
L/Mono
AUDIO
R
Pb
S-VIDEO
Pr
6
COMPONENT VIDEO INPUT
6
Jack Panel
Back of TV
NOTE: Use the Channel + or – buttons on
theTV remote control to tune to the AV1
channel for the cable box signal. Once
tuned, change channels at the cable box, not
the television.
A
N
T
7
5
Ω
M
o
n
i
t
o
r
o
u
t
A
V
1
i
n
A
V
2
i
n
VIDEO
Y
L/Mono
AUDIO
R
Pb
Pr
S-VIDEO
C
O
M
P
O
N
E
N
T
V
I
D
E
O
I
N
P
U
T
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC TV AND REMOTE CONTROL OPERATION
3
TELEVISION
Press the POWER button to
Remote
turn the TV ON.
Sensor -
1
Sensor for
activating
remote con-
trol com-
Note:You can also press any but-
ton on the top of the TV to turn
the TV ON.
mands when
the remote is
used to con-
trol theTV.
Press theVOLUME + button
to increase the sound level, or
theVOLUME – button to
lower the sound level.
Press the CHANNEL UP +
or DOWN - button to select
TV channels.
2
3
1
2
3
Power Light Indicator - Light
will show while TV is powered on.
REMOTE CONTROL
Point the remote control
toward the remote sensor win-
dow on the TV when operating
the TV with the remote.
1
4
BATTERY INSTALLATION
Remove the battery com-
partment lid on the back of
5
6
the remote.
Place the batteries (2-AA) in
the remote. Be sure the (+)
and (-) ends of the batteries line
up correctly (inside of case is
marked.)
5
7
Reattach the battery lid.
7
HELPFUL HINT
6
Remember, the tuned channel num-
ber will always briefly appear when
theTV is first turned ON (and with
channel changes.)
You can also press the STATUS/EXIT
button (on the remote) to see what
channel theTV is ON.
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE AV1 IN OR AV2 IN (INPUT) JACKS
4
heTV’s audio/video input jacks are for
Back of TV
Tdirect picture and sound connections
between theTV and aVCR (or similar
device) that has audio/video output jacks.
Both the AV1 and AV2 Input Jack connec-
tions are shown on this page, but either
one can be connected alone. Follow the
easy steps below to connect your accessory
device to the AV1 and AV2 IN Jacks located
on the back of theTV.
1
1
Monitor out
AV2 in
AV1 in
VIDEO
L/Mono
AUDIO
R
Pb
S-VIDEO
Pr
COMPONVIDEO INPUT
Connect theVIDEO (yellow)
cable to theVIDEO AV1 IN (or
1
AV1
Connection
AV2 IN) jack on the back of theTV.
2
2
Connect the AUDIO (red and
white) cables to the AUDIO (left
2
4
and right) AV1 IN (or AV2 in) jacks
on the rear of theTV.
Connect theVIDEO (yellow)
R
L
S-VIDEO
OUT
VIDEO
OUT
ANT/CABLE
OUT
cable to theVIDEO OUT jack on
3
AUDIO OUT
3
4
the back of theVCR (either one or
two) or accessory device being used.
Back ofVCR
Connect the AUDIO (red and
white) cables to the AUDIO (left
and right) OUT jacks on the rear of
theVCR (either one or two) or
accessory device being used.
Turn theVCR (either one or
7
VCR One (or accessory
device) (Equipped with Audio
andVideo Output Jacks)
5
two) or accessory device and
theTV ON.
5
6
Video In
(Yellow)
Press the CH + or CH- buttons
Audio In
(Red and
White)
AV2
Connection
to set theTV to its AV1or AV2
channel. (Go to your lowest channel,
for example channel 1, then change
channels down to find the correct
input.)
With either of theVCRs (or accesso-
R
L
S-VIDEO
OT
VIDEO
OUT
ANT/CABLE
OUT
AUDIO OUT
ry devices) ON and a prerecorded
7
tape (CD, DVD, etc.) inserted, press
3
4
the PLAY button to view the tape
on the television.
HELPFUL HINT
7
Audio and video cables are not
supplied with theTV, but are avail-
able from Magnavox or electronics
retailers.
VCR Two (or accessory
device) (Equipped with
Video and Audio Output Jacks)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE S-VIDEO INPUT JACKS
5
Back of TV
he S(uper)-Video connection on the
Trear of theTV can provide you with bet-
ter picture detail and clarity for the play-
back of accessory sources such as DBS
(digital broadcast satellite), DVD (digital
video discs), video games, and S-VHSVCR
(video cassette recorder) tapes than the
normal antenna picture connections.
NOTE: The accessory device must have
an S-VIDEO OUT(put) jack in order for
you to complete the connection on this
page.
1
Monitor out
AV2 in
AVin
1
VIDEO
Y
L/Mono
AUDIO
R
Pb
Pr
S-VIDEO
COMPONENT VIPUT
Audio Cable
(Red and White)
Connect one end of the S-
VIDEO CABLE to the S-VIDEO
1
S-Video Cable
jack on the back of theTV.Then
connect one end the AUDIO (red
and white) CABLES to the AV2 in
AUDIO L and R (left and right)
jacks on the rear of theTV.
L
R
VIDEO
OUT
S-VIDEO
OUT
ANT/CABLE
OUT
AUDIO OUT
Connect other end of the
S-VIDEO CABLE to the
2
2
Back ofVCR
2
S-VIDEO OUT jack on the back of
theVCR.Then connect the other
ends of the AUDIO (red and
white) CABLES to the AUDIO
(left and right) OUT jacks on the
rear of theVCR.
VCR (Equipped with
S-Video Jacks)
5
Turn theVCR and theTV
3
ON.
3
POWER
1
4
2
5
8
0
3
6
Press the CH + or CH- buttons
CH
4
to set theTV to its SVHS2
4
CH
7
9
channel. (Go to your lowest chan-
nel, for example channel 1, then
change channels down to find the
correct source channel.)
A/CH
CC
VOL
VOL
STATUS
EXIT
MENU
Now your ready to place a prere-
corded video tape in theVCR and
5
SLEEP
MUTE
press the PLAY ᮣ button
.
SURF
SMART
PICTURE SOUND
HELPFUL HINT
The S-VIDEO andVIDEO AV2 in(puts) are in
parallel. The S-VIDEO input is dominant when
in use. If separate video signals are connected
to the S-VIDEO andVIDEO AV2 in(puts), the
signal from theVIDEO AV2 in(puts) will not be
usable.
MAGNAVOX
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE CVI (COMPONENT VIDEO INPUT) JACKS
6
omponentVideo inputs provide for
Cthe highest possible color and picture
resolution in the playback of digital signal
source material, such as with DVD play-
ers. The color difference signals (Pb, Pr)
and the luminance signal (Y) connected
and received separately, which allows for
improved color bandwidth information
(not possible when using composite video
or S-Video connections).
The CVI connection will be dominate over the AV1 inVideo
Input.When a ComponentVideo Device is connected as
described, it is best not to have a video signal connected to
the AV1 inVideo Input jack.
Back of TV
Monitor out
AV2 in
AV1 in
2
VIDEO
Y
Connect the Component (Y,
Pb, Pr)Video OUT jacks from
L/Mono
AUDIO
R
Pb
Pr
1
1
the DVD player (or similar
device) to the (Y, Pb, Pr) in(put)
jacks on the TV.When using the
ComponentVideo Inputs, it is
best not to connect a signal to
the AV1 INVideo Jack.
Connect the red and white
AUDIO CABLES to the Audio
(left and right) output jacks on
the rear of the accessory device
to the Audio (L and R) AV1 IN
Input Jacks on the TV.
S-VIDEO
PONENT VIDEO INP
Component
Video
Cables
(Green, Blue,
Red)
COMP VIDEO
S-VIDEO
OUT
VIDEO
OUT
AUDIO
Y
Pb
Pr
R
L
2
OUT
Audio
Cables
(Red and
White)
Turn theTV and the DVD
(or digital accessory device)
3
4
ON.
Accessory Device
Equipped with
ComponentVideo
Outputs.
5
Press the CH + or CH- but-
tons to set theTV to its CVI
channel. (Go to your lowest
channel, for example channel 1,
then change channels down to find
the correct source channel.)
3
HELPFUL HINT
The description for the component video connec-
tors may differ depending on the DVD player or
accessory digital source equipment used (for exam-
ple,Y, Pb, Pr;Y, B-Y, R-Y;Y, Cr, Cb). Although abbrevi-
ations and terms may vary, the letters b and r stand
for the blue and red color component signal con-
nectors, and Y indicates the luminance signal. Refer
to your DVD or digital accessory owner’s manual
for definitions and connection details.
Insert a DVD disc into the DVD
player and press the PLAY ᮣ
button on the DVD Player.
5
Note: Cables are not supplied with theTV, but are
available from Magnavox or electronics retailers.
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE MONITOR OUT(PUT) JACKS
7
Jack Panel
Located on the back of the TV
he Monitor (Audio/Video) out jacks are
Tgreat for recording with aVCR or used to
connect an external audio system for better
sound reproduction.
Monitor out
AV1 in
AV2 in
For Audio System Connection:
Connect one end of the R(ight)
VIDEO
Y
L/Mono
AUDIO
R
and L(eft) AUDIO (Monitor
Pb
1
S-VIDEO
Out) jacks on theTV to the R and
CONENT VIDEO INPUT
L audio input jacks on your amplifi-
er or sound system. Set the audio
system’s volume to a normal listen-
ing level.
1
AV OUT
AUDIO L(eft) and R(ight)
Audio Cables
(Red & White)
Turn theTV and audio system
ON. You can now adjust the sound
R
L
2
level coming from the audio system
with theVOLUME (+) or (–) button
on theTV or remote control.
AUX/TV INPUT
PHONO INPUT
For SecondVCR
Connection/Recorder:
NOTE: Refer to panel 4 for the proper
hookup of the firstVCR. Follow the
instructions on how to tune to the AV1
channel to view a pre-recorded tape.
The following steps allow you to
connect a secondVCR to record the
program while you’re watching it.
Audio System
with Audio Inputs
2
Monitor OUT
VIDEO &AUDIO
L(eft) and R(ight)
Jack Panel
Located on the back of the TV
Connect one end of the yellow
Monitor out
AV1 in
AV2 in
Video Cable to the Monitor out
VIDEO
3
Y
VIDEO plug. Connect the other
no
AUDIO
R
3
end to theVIDEO IN plug on the
Pb
Pr
S-VIDEO
secondVCR.
COMPONENT VIDEO IN
Connect one end of the red
and white Audio cable from the
Audio Cables
(Red &White)
4
Monitor out AUDIO L and R
Video Cable
(Yellow)
plugs on theTV to the AUDIO IN
plugs on theVCR.
4
Turn the SecondVCR ON,
ANTENNA
IN
OUT
AUDIO
IN
OUT
VIDEO
IN
ANTENNA
IN
VIDEO
IN
OUT
AUDIO
IN
insert aVHS tape and it’s ready to
5
R
L
ANTENNA
OUT
L
R
ANTENNA
OUT
record what’s being viewed on the
TV screen.
HELPFUL HINT
Audio and video cables are not sup-
plied with theTV, but are available
from Magnavox or electronics retailers.
5
FirstVCR (accessory device)
(Hookup from Panel 4)
SecondVCR
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE SIDE AUDIO /VIDEO INPUTS
Side A/V Input Connection:
Aable for a quick connection of aVCR, to
playback video from a camera or attach a
gaming device. Use the AV button on the
remote control to tune these inputs.
8
udio andVideo Side Inputs are avail-
Connect the video (yellow)
cable from theVideo output on
1
the Camera (or accessory device)
to theVideo (yellow) Input locat-
ed on the SIDE of theTV.
Jack Panel
located
on the
Side of
TV
For S-Video Devices: Connect
one end of the S-VIDEO CABLE
to the S-VIDEO jack on the SIDE
of theTV and the other end to
the S-VIDEO out jack on the
Camera.
3
When head-
phones are used
the sound com-
ing from the TV
speakers will be
muted.
Video Cable
(yellow)
1
For Stereo Devices: Connect
the audio cable (red and white)
2
from the Audio Left and Right
Outputs on the Camera to the
Audio L and R (white and red)
jack on the SIDE of the television.
For Mono Devices: Connect
one end of the audio cable from
the Audio Out jack on the device
to the Audio L (white) jack on the
SIDE of the television.
Turn theTV and the accessory
device ON.
Press the CH + or CH- buttons
to set theTV to its SIDE chan-
VIDEO
L
2
AUDIO
R
Audio
Cables
(red &
white)
Optional
Headphones
POWER
1
4
2
5
8
0
3
6
AUDIO
RIGHT LEFT
VIDEO
3
CH
S-VIDEO
CH
7
9
A/CH
CC
VOL
VOL
4
4
Jack Panel of
Accessory
Device
STATUS
EXIT
nel. (Go to your lowest channel,
for example channel 1, then change
channels down to find the correct
source channel.)
MENU
SLEEP
MUTE
SURF
SMART
PICTURE SOUND
Press the PLAY 3button on
5
the accessory device to view play-
5
back, or to access the accessory
device (camera, gaming unit, etc.).
MAGNAVOX
3
Download from Www.Somanuals.com. All Manuals Search And Download.
DESCRIPTION OF REMOTE CONTROL BUTTONS
9
NUMBER Buttons
POWER
CH
1
4
2
5
8
0
3
6
Press the Number buttons to select TV
channels or to enter values in the menu.
For single-digit channels, press the
Number button for the channel you
want. The TV will pause briefly before
going to the chosen channel.
CH
7
9
A/CH Button
A/CH
CC
VOL
VOL
(Alternate Channel)
Press to switch between the last channel
and the present channel.
Details are on panel 27.
STATUS
EXIT
STATUS/EXIT Button
Press to see the current channel number.
Press to remove a menu.
MENU
CC Button
SLEEP
MUTE
Press to activate Closed Captioning.
Details are on panel 25.
SURF
SMART
SLEEP Button
Press to set the TV to turn itself off with-
in a certain time. Details are on panel 25.
PICTURE SOUND
SmartSurf
If your TV model has SmartSurf, press this
button to move through the channels you
have set. Details are on panel 27.
MAGNAVOX
Continued on Next Panel
Download from Www.Somanuals.com. All Manuals Search And Download.
(CONT’D)
10 DESCRIPTION OF REMOTE CONTROL BUTTONS
POWER button
Press to turn the TV on or off.
POWER
1
4
2
5
8
0
3
6
CH
CH(annel) +/– Buttons
Press to scan memorized channels.
CH
7
9
VOL(ume) +/– Buttons
Press to increase or decrease the
sound.
A/CH
CC
VOL
VOL
Note:
STATUS
EXIT
Pressing both buttons together will
show the onscreen menu.
MENU
MENU Button
Press to see the menu. Press
repeatedly to return to previous
menus or remove the menus.
SLEEP
MUTE
Arrow 2 3 5 ▼ Buttons
Press to select or adjust items in
the menu. 2 3 buttons can also be
used to change the screen format.
SURF
SMART
PICTURE SOUND
MUTE Button
Press to eliminate or restore the TV
sound. MUTE will appear on the TV
when the sound is muted.
SMART SOUND Button
Press to choose a sound setting.
Details are on panel 26.
MAGNAVOX
SMART PICTURE Button
Press to choose a picture setting.
Details are on panel 26.
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE LANGUAGE CONTROL
11
or our Spanish speakingTV owners
Fan on-screen LANGUAGE option is
present.With the LANGUAGE control
you can set theTV’s on-screen menu to
be shown in either English or Spanish.
Press the MENU button on
the remote to show the on-
screen menu.
Press the CURSOR UP ▲
or DOWN ▼ buttons to
scroll through the on-screen
menu until the word
INSTALL is highlighted.
1
2
POWER
CH
1
4
2
5
8
0
3
6
2
4
CH
7
9
A/CH
CC
VOL
VOL
Press the CURSOR RIGHT
STATUS
EXIT
ᮣ button to display the
3
4
1
INSTALL menu features.
MENU
6
Press CURSOR UP ▲ or
DOWN ▼ buttons to scroll
the Install features until the
word LANGUAGE is high-
lighted.
Press the CURSOR RIGHT
ᮣ button repeatedly to
select ENGLISH or
ESPAÑOL (Spanish).
When finished, press the
STATUS /EXIT button to
remove the menu from the
TV’s screen.
SLEEP
MUTE
3
5
SURF
SMART
PICTURE SOUND
2
4
5
MAGNAVOX
6
HELPFUL HINT
The Language control only makes
the TV’s on-screen MENU items
appear in English or Spanish text.
It does not change the other on-
screen text features such as Closed
Caption (CC) TV shows.
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE TUNER MODE CONTROL
12
heTUNER MODE control allows you
Tto change theTV’s signal input to
either ANTENNA, CABLE, or AUTO mode.
It’s important for theTV to know what
type of signal that is connected. (From a
CableTV signal or a normal Antenna sig-
nal.) In the AUTO mode, when the AUTO
PROGRAM feature is activated, theTV will
automatically choose the correct mode.
Main
Picture
Sound
Features
Install
Brightness
Color
Picture
Sharpness
Tint
Main
Picture
Sound
Features
Install
Language
Tuner Mode
Auto Program
Channel Edit
More...
Press the MENU button on
POWER
CH
1
4
2
5
8
0
3
6
9
the remote to show the on-
1
2
4
Install
Language
Tuner Mode
Auto Program
Channel Edit
screen menu.
Press the CURSOR UP ▲ or
DOWN ▼ buttons to scroll
through the on-screen menu until
the word INSTALL is highlight-
ed.
English
Antenna
CH
7
A/CH
CC
VOL
VOL
2
STATUS
EXIT
1
MENU
6
OR
SLEEP
MUTE
Press the CURSOR RIGHT
3
5
SURF
SMART
Install
Language
Tuner Mode
Auto Program
Channel Edit
ᮣ button to display the
3
English
Cable
PICTURE SOUND
2
4
INSTALL menu features.
Press CURSOR UP ▲ or
DOWN ▼ buttons to scroll
4
the Install features until the
words TUNER MODE is high-
lighted.
MAGNAVOX
OR
Press the CURSOR RIGHT
Install
Language
Tuner Mode
Auto Program
Channel Edit
ᮣ button to select either
English
Auto
5
ANTENNA, CABLE, or
AUTO mode.
When finished, press the
STATUS /EXIT button to
6
remove the on-screen menu
from the TV’s screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO AUTOMATICALLY PROGRAM TV
13
ourTV can automatically set itself
Yfor local area (or CableTV) chan-
nels.This makes it easy for you to
select only theTV stations in your
area when the CHANNEL (+) or (–)
buttons are pressed.
Main
Picture
Sound
Features
Install
Brightness
Color
Picture
Sharpness
Tint
Main
Picture
Sound
Features
Install
Language
Tuner Mode
Auto Program
Channel Edit
More...
Note: Make sure the antenna or cable
signal connection has been completed
before AUTO PROGRAM is activated.
POWER
1
4
2
5
8
0
3
Press the MENU button
CH
6
2
4
on the remote to show the
on-screen menu.
Press the CURSOR UP ▲
or DOWN ▼ buttons to
scroll through the on-screen
menu until the word
INSTALL is highlighted.
Install
Language
Tuner Mode
Auto Program
Channel Edit
1
2
CH
7
9
A/CH
CC
VOL
VOL
STATUS
EXIT
1
MENU
6
SLEEP
MUTE
Press the CURSOR
Auto Program
Channel
3
5
SURF
SMART
12
13
RIGHT ᮣ button to display
3
PICTURE SOUND
2
4
the INSTALL menu features.
Press CURSOR UP ▲ or
DOWN ▼ buttons to
Auto Program
Channel
4
scroll the Install features until
the words AUTO PRO-
GRAM are highlighted.
MAGNAVOX
Auto Program
Channel
14
Press the CURSOR
RIGHT ᮣ button to start
5
the Auto Program scanning of
channels.Auto Programming
will store all available chan-
nels in the TV’s memory then
tune to the lowest available
channel when done.
HELPFUL
HINT
When finished, press the
When CABLE is selected, channels
1-125 are available.
STATUS/EXIT button to
6
remove the menu from the
TV’s screen.
When ANTENNA is selected, chan-
nels 2-69 are available.
When AUTO is selected, the TV
will automatically set itself to the
correct mode based on the type of
signal it detects when the AUTO
PROGRAM feature is activated.
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO ADD OR DELETE CHANNELS
14
hannel Edit makes it easy for you to ADD or
CDELETE channels from the list of channels
stored in theTV’s memory.
Main
Picture
Sound
Features
Install
Brightness
Color
Picture
Sharpness
Tint
Press the MENU button on the
Main
Picture
remote to show the on-screen menu.
Language
1
Sound
Features
Install
Tuner Mode
Auto Program
Channel Edit
More...
Press the CURSOR UP ▲ or
DOWN ▼ buttons to scroll through
2the on-screen menu until the word
INSTALL is highlighted.
6
8
POWER
1
4
2
5
8
0
3
6
2
4
Press the CURSOR RIGHT 3
CH
6
button to display the INSTALL menu
Install
Language
Tuner Mode
Auto Program
Channel Edit
3features.
Channel
Skipped
CH
7
9
A/CH
CC
VOL
VOL
Press the CURSOR UP ▲ or
TUS
EXIT
DOWN ▼ buttons to scroll the
1
4Install features until the words
MENU
CHANNEL EDIT are highlighted.
9
SLEEP
MUTE
Press the CURSOR RIGHT 3
Channel Edit
Channel
Skipped
3
5
8
SURF
SMART
button to display the CHANNEL
12
5EDIT options.
PICTURE SOUND
2
4
7
With the CHANNEL EDIT
options displayed, and CHANNEL
6NO. highlighted; you can use the cur-
sor buttons to scroll through all avail-
able channels that you wish to add
(Skipped OFF), or delete (Skipped
ON) from theTV’s memory. You can
also use the NUMBERED buttons
to go directly to a specific num-
bered channel that you wish to
add or skip. Or, you can also use the
CH + or CH - to quickly scan the
channels that have not been skipped.
MAGNAVOX
Channel Edit
Channel
Skipped
On
Off
Channel Edit
Channel
Skipped
Using the CURSOR DOWN ▼
button, scroll the menu to highlight the
7word SKIPPED.
Now use the CURSOR RIGHT 3
button to toggle between ON or
8OFIfF.ON is selected the channel is
HELPFUL HINT
skipped when scrolling channels
with the CH + or – buttons. If
OFF is selected the channel is not
skipped when scrolling channels
with the CH + or – buttons.
An “X” appearing in front of any channel
will indicate that channel has skip on.When
the CH + or CH - buttons are used, those
channels will be skipped.
In order to get to the external input chan-
nels, such as CVI, SVHS,AV, etc., you must
use the CURSOR Right 3 or CURSOR
LEFT 2buttons.
When finished, press the STATUS
/EXIT button to remove the menu
9from theTV’s screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE PICTURE ADJUSTMENT CONTROLS
15
o adjust yourTV picture controls, select a
Tchannel and use the Picture Menu Controls
listed below:
Picture
Brightness
Color
Brightness: Press the CURSOR
50
RIGHT 3or LEFT 2buttons
1
until the darkest parts of the picture
are as bright as you prefer.
Picture
Sharpness
Tint
Color Temp.
Color: Press the CURSOR
RIGHT 3 or LEFT 2 buttons
2
3
to add or eliminate color.
Picture: Press the CURSOR
RIGHT 3or LEFT 2buttons
until lightest parts of the picture
show good detail.
Brightness
65
50
50
7
Sharpness: Press the CURSOR
RIGHT 3or LEFT 2buttons to
4
5
Color
improve detail in the picture.
Tint: Press the CURSOR RIGHT
Picture
3or LEFT 2buttons to obtain
natural skin tones.
Sharpness
Color Temp: Press the CURSOR
RIGHT 3or LEFT 2buttons to
6
select NORMAL, COOL, or WARM
Tint
0
picture preferences. (NORMAL will
keep the whites, white; COOL will
make the whites, bluish; and WARM
will make the whites, reddish.)
Color Temp.
Normal
Warm
NR: Press the CURSOR RIGHT
or
3or LEFT 2buttons to turn ON
Cool
7
or OFF. Noise Reduction helps to
On
Off
eliminate “noise” from the picture.
NR
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE SOUND ADJUSTMENT CONTROLS
16
o adjust yourTV sound, select and use the
TSound Menu Controls listed below:
Treble Boost: Press the ᮣ or ᮤ
buttons to turn the control On or
1
Main
Picture
Off.When On, the control will
Treble Boost
Bass Boost
Balance
AVL
enhance the high frequency sounds.
Sound
Features
Install
Bass Boost: Press the ᮣ or ᮤ
buttons to turn the control On or
2
Off.When On, the control will
Sound
enhance the low frequency sounds.
Balance: Press the ᮣ or ᮤ but-
tons to adjust the level of sound com-
3
4
ing from the left and right speakers.
AVL: (AutoVolume Leveler) Press
50
50
R
Treble Boost
Bass Boost
Balance
the ᮣ or ᮤ buttons to turn the
control On or Off.When On,AVL
will level out the sound being heard
when sudden changes in volume
occur during commercial breaks or
channel changes.
L
Sound: Press the ᮣ or ᮤ buttons
to select between Stereo or Mono
AVL
On
5
settings. Note: If Stereo is not pres-
ent on a selected show and theTV is
placed in the Stereo mode, the sound
coming from theTV will remain in
the Mono mode.
or Off
Sound
Mono
or Stereo
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE FORMAT CONTROL
17
any times while watching movies
Mfrom a DVD player the image is
shown in “letter box” format.This is the for-
mat that is shown in movie theaters.When
shown on aTV screen, the image will have
areas of black on top and bottom of the
screen.
POWER
CH
1
4
2
5
8
0
3
6
CH
7
9
A/CH
CC
VOL
VOL
1
STATUS
EXIT
Press the CURSOR UP ᮡ or
4:3
2
MENU
CURSOR DOWN ᮢ buttons
1
to select one of the two options
SLEEP
MUTE
4:3 or Expand 4:3.
4:3 - Standard format for theTV.
Expand 4:3 - Enlarges the picture
to fill out the entire screen area,
eliminating the “letter box” effect.
SURF
SMART
1
PICTURE SOUND
Expand 4:3
When finished, press the
STATUS/EXIT button to
remove the menu from theTV’s
screen.
2
MAGNAVOX
ALTERNATE CHANNEL
our remote control has an Alternate
YChannel button that allows you to tog-
gle between the current and previous
button. For instance, if you are watching
two games onTV, you can enter the
channel numbers once and flip between
the two channels with the touch of only
one button.
After entering the two channels numbers,
so that one is the last viewed channel
and the other is the current channel, fol-
low the step below.
POWER
CH
1
4
2
5
8
0
3
6
CH
7
9
A/CH
CC
VOL
VOL
STATUS
EXIT
MENU
SLEEP
MUTE
SURF
SMART
PICTURE SOUND
Press the A/CH button on the
remote control.The channels will
toggle between the current chan-
nel and the last viewed channel.
MAGNAVOX
1
Download from Www.Somanuals.com. All Manuals Search And Download.
UNDERSTANDING THE SMARTLOCK™ CONTROLS
18
he Smartlock™ feature is an integrated cir-
MOVIE RATINGS Continued
Tcuit that receives and processes data sent by
broadcasters, or other program providers, that
contain program content advisories.When pro-
grammed by the viewer, aTV with Smartlock™
can respond to the content advisories and block
program content that may be found objection-
able (such as offensive language, violence, sexual
situations, etc.).This is a great feature to censor
the type of viewing children may watch.
R: Restricted - This is programming is specifi-
cally designed for adults. Anyone under the age
of 17 should only view this programming with
an accompanying parent or adult guardian.
NC-17: No one under the age of 17 will
be admitted. - This type of programming
should be viewed by adults only.
X:Adults Only - This type of programming
contains one or more of the following: very
graphic violence, very graphic and explicit or
indecent sexual acts, very coarse and intensely
suggestive language.
Smartlock™ offers various BLOCK-
ING controls from which to choose:
Access Code - An Access Code must be
set to prevent children from unblocking
questionable or censored programming set
by their parents.
TV RATINGS
TV-Y -- Designed for a very young audience,
including children ages 2-6.
Channel Block - After an access code has
been programmed, you can block individual
channels including the A/V inputs.
TV-Y7 -- It may be appropriate for children
age 7 and above who have acquired the devel-
opment skills needed to distinguish between
make-believe and reality.
TV-G -- Suitable for most audiences, this type
of programming contains little or no violence,
no strong language, and little or no sexual dia-
logue or situations.
TV-PG --This program contains material that
parents may find unsuitable for younger chil-
dren. Could contain Moderate violence (V),
some sexual situations (S), infrequent coarse
language (L), or some suggestive dialogue (D).
Clear All - Allows you clear all channels
being blocked from your viewing set with
the Channel Block Control.
Block All - Allows you to block ALL chan-
nels and A/V inputs at one time.
Movie Ratings - Certain blocking options
exist which will block programming based on
ratings patterned by the Motion Pictures
Association of America.
TV Ratings - Just like the Movie Ratings,
programs can be blocked from viewing using
standardTV ratings set byTV broadcasters.
TV-14 --This program contains some material
that many parents would find unsuitable for
children under 14 years of age.This type of
programming contains one or more of the fol-
lowing: intense violence (V), intense sexual situ-
ations (S), strong coarse language (L), or
intensely suggestive dialogue (D).
MOVIE RATINGS
G: General Audience - All ages admitted.
Most parents would find this program suit-
able for all ages.
PG: Parental Guidance Suggested - This
programming contains material that parents
may find unsuitable for younger children.
PG-13: Parents Strongly Cautioned - This
programming contains material that parents
may find unsuitable for children under the age
of 13.
TV-MA --This program is specifically designed
to be viewed by adults and therefore may be
unsuitable for children under 17.This type of
programming contains one or more of the fol-
lowing: graphic violence (V), explicit sexual situ-
ations (S), or crude indecent language (L).
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING UP A SMARTLOCK™ ACCESS CODE
19
ver the next few panels you’ll learn how
Oto block channels and get a better
understanding of the rating terms for certain
programming.
Main
Picture
Sound
Features
Install
Features
SmartLock
Timer
SmartLock
Start Time
Stop Time
Channel
Activate
Display
First, let’s start by learning how to set a per-
sonal access code:
Press the MENU button on the
remote to show the on-screen
menu.
1
Features
SmartLock
Features
SmartLock
Access Code
- - - -
Access Code
XXXX
Press the CURSOR UP
5
or
DOWN
▼
buttons until the word
2
3
4
5
6
FEATURES is highlighted.
Press the CURSOR RIGHT 3
button to display the FEATURES
menu options.
Features
SmartLock
Features
SmartLock
Access Code
XXXX
Incorrect
New Code
- - - -
Press the CURSOR UP
5
or
DOWN
▼
buttons until the
words Smartlock™ are highlighted.
Press the CURSOR RIGHT 3
button. The screen will read,
“ACCESS CODE - - - - .”
Using the NUMBERED buttons,
enter 0, 7, 1, 1. “XXXX” appears
on the Access Code screen as you
press the numbered buttons.
“INCORRECT CODE” will
appear on the screen, and you will
need to enter 0, 7, 1, 1 again.
The screen will ask you to enter a
“New Code.” Enter a “new” 4
digit code using the NUM-
BERED buttons. The screen will
then ask you to CONFIRM the code
you just entered. Enter your new
code again.“XXXX” will appear
when you enter your new code and
then display the Smartlock™ menu
options.
Features
SmartLock
SmartLock
Block Channel
Setup Code
Clear All
Block All
Movie Rating
TV rating
Confirm Code
XXXX
PO
1
4
2
5
8
0
3
6
CH
2
6
7
7
CH
7
9
A/CH
CC
VO
4
STATUS
EXIT
VOL
1
MENU
SLEEP
MUTE
3
5
SURF
SMART
PICTURE SOUND
Proceed to the next panel to learn more...
2
4
MAGNAVOX
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO BLOCK CHANNELS
20
fter your personal access code has been
Aset (see previous page), you are now
ready to select the channels or the A/V
Inputs you want to block out or censor.
Once you’ve entered your access code and
the Smartlock™ features are displayed on
the screen:
SmartLock
Block Channel OffStop Time
Setup Code
Clear All
Block All
Channel
Activate
Display
Movie Rating
TV Rating
Press the CURSOR UP 5or
DOWN ▼ buttons until the
1
words BLOCK CHANNELS are
highlighted.
Block Channel On
Press the CURSOR RIGHT 3
button to turn blocking ON or
2
OFF for that channel.When ON is
selected the channel will be
blocked.
Enter your
Access Code to
view a tuned
channel that is
blocked with
Block Channel.
Channel 12
Blocked By SmartLock
Channel Blocking
Access Code
- - - -
Press the CH + or CH – button
to select other channels you wish
to block. Repeat step 2 to block the
new channel.
3
POWER
1
4
2
5
8
0
3
6
When finished, press the
CH
STATUS/EXIT button to
remove the menu from the screen.
4
CH
9
H
CC
VOL
VOL
1
NOTE: If you ever forget your code, the
0, 7, 1, 1 code is the factory default and
can be used to enter and create a new
access code.
STATUS
3
2
EXIT
4
MENU
SLEEP
MUTE
SURF
SMART
1
PICTURE SOUND
MAGNAVOX
Download from Www.Somanuals.com. All Manuals Search And Download.
BLOCKING OR CLEARING ALL CHANNELS AT THE SAME TIME
21
fter blocking specific channels there
Amay come a time when you want to
block or clear all the channels at the same
time.
Once you’ve entered your access code and
the Smartlock™ features are displayed on
the screen:
SmartLock
Block Channel
Setup Code
Clear All
Block All
Movie Rating
TV Rating
Clear ?Stop Time
Channel
Activate
Display
Press the CURSOR UP 5or
DOWN ▼ buttons to select
1
Cleared
Clear All
either CLEAR ALL or BLOCK ALL.
If CLEAR ALL is selected,
SmartLock
Block Channel
Setup Code
Clear All
press the CURSOR RIGHT 3
2
button to clear all blocked chan-
nels.All channels will be viewable.
Block All
Movie Rating
TV Rating
Off
If BLOCK ALL is selected,
press the CURSOR RIGHT 3
button to turn the control ON or
OFF.When ON is selected,ALL
available channels will be blocked
from viewing.
Block All
On
When finished, press the STA-
TUS/EXIT button to remove the
menu from the screen.
POWER
1
4
2
5
8
0
3
6
CH
3
7
9
A/CH
CC
1
3
1
VOL
STATUS
EXIT
NOTE: If you ever forget your code,
the 0, 7, 1, 1 code is the factory default
and can be used to enter and create a
new access code.
MENU
SLEEP
MUTE
2
SURF
SMART
PICTURE SOUND
MAGNAVOX
Download from Www.Somanuals.com. All Manuals Search And Download.
BLOCKING PROGRAMS BASED ON MOVIE RATINGS
22
he Smartlock™ feature can block pro-
Tgramming based on the Movie Industry rat-
ings.
SmartLock
Block Channel
Setup Code
Clear All
Once you’ve entered your access code and the
Smartlock™ features are displayed on the
screen:
G
PG
PG-13
R
Block All
Movie Rating
TV Rating
NC-17
X
Press the CURSOR UP 5or
DOWN ▼ buttons to highlight the
1
words MOVIE RATING.
Press the CURSOR RIGHT 3
button to display the MOVIE RAT-
2
ING options (G, PG, PG-13, R, NC17,
Movie Rating
G
or X).
Off
PG
PG-13
R
NC-17
X
Press the CURSOR UP 5or
DOWN ▼ buttons to highlight any
3
of the Movie Rating options. When
highlighted, all these options can be
turned ON (which will allow blocking)
or OFF (which will allow viewing).
Use the CURSOR RIGHT 3 but-
G
On
ton on the remote to turn the rating
4
option ON or OFF.
POWER
1
4
2
5
8
0
3
CH
CH
6
When a rating level is chosen to be
blocked, any higher level rating will also be
blocked from viewing. (i.e.: If “R” is selected
to be blocked, NC-17 and X will automati-
cally be blocked.)
1
7
9
A/CH
CC
VO
3
VOL
STATUS
EXIT
MENU
SLEEP
MUTE
NOTE: If you ever forget your code, the 0,
7, 1, 1 code is the factory default and can
be used to enter and create a new access
code.
2
4
SURF
SMART
1
3
PICTURE SOUND
MAGNAVOX
Download from Www.Somanuals.com. All Manuals Search And Download.
BLOCKING PROGRAMS BASED ON TV RATINGS
23
he Smartlock™ feature can block pro-
Tgramming based on theTV Industry ratings.
Once you’ve entered your access code and the
Smartlock™ features are displayed on the
screen:
TV Rating
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
Off
Press the CURSOR UP 5or
DOWN ▼ buttons to highlight the
1
wordsTV RATING.
TV-MA
Press the CURSOR RIGHT 3
button to display theTV RATING
2
options (TV-Y,TV-Y7,TV-G,TV-PG,
TV-14, orTV-MA).
Press the CURSOR UP 5or
On
TV-Y
DOWN ▼ buttons to highlight any
3
of theTV Rating options. When high-
Block All, FV
TV-Y7
TV-G
lighted, all these options can be turned
ON (which will allow blocking) or OFF
(which will allow viewing).
Off
Block All, V, S, L, D
NOTE: SomeTV RATING options also have
sub-ratings.The ratings ofTV-Y7,TV-PG,TV-
14,TV-MA can be customized to blockV (vio-
lence), FV (fantasy violence), S (sexual situa-
tions), L (coarse language), or D (suggestive
dialogue).
TV-PG
TV-14
Block All, V, S, L, D
Block All, V, S, L
TV-MA
1
Press the CURSOR RIGHT 3
POWER
1
4
2
5
8
0
3
6
button on the remote to turn theTV-
4
Y orTV-G rating ON or OFF. Or,
3
CH
press the CURSOR RIGHT 3
button to enter the sub-menus for the
TV-Y7,TV-PG,TV-14 orTV-MA ratings.
CH
7
9
5
A/CH
CC
VOL
VOL
STATUS
EXIT
If theTV-Y7,TV-PG,TV-14 orTV-MA
sub-menu is accessed, press the
MENU
5
CURSOR UP 5or DOWN ▼
SLEEP
MUTE
buttons to select one of the options
2
4
6
1
3
5
(Block All,V, S, L, D, or FV).
SURF
SMART
Press the CURSOR RIGHT 3
PICTURE SOUND
button on the remote to turn the
6
option ON or OFF.
MAGNAVOX
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER SMARTLOCK™ BLOCKING OPTIONS
24
martlock™ offers the viewer other
Sblocking features as well.With these
Blocking Options, the censoring can be
turned ON or OFF.
Once Smartlock™ features are displayed
on the screen:
SmartLock
Setup Code
Clear All
Block All
Press the CURSOR UP 5or
Movie Rating
TV Rating
Block Options
DOWN ▼ buttons until the
1
words BLOCKING OPTIONS
are highlighted.
Press the CURSOR RIGHT 3
button to display the Blocking
2
Options (BLOCKING, UNRAT-
ED, or NO RATING) menu.
On
On
On
Blocking
BLOCKING: Might be called the “mas-
ter switch” for Smartlock™.When ON,
ALL blocking/censoring will take place.
When OFF,ALL blocking is disabled.
Unrated
No Rating
UNRATED: ALL unrated programs
based on the Movie Ratings or Parental
(TV) Guidelines can be blocked if this fea-
ture is set to ON and the BLOCKING
feature is set to OFF.
POWER
1
2
5
8
0
3
6
CH
4
1
3
CH
7
9
NO RATING: ALL programming with
NO content advisory data can be
blocked if set to ON and the BLOCK-
ING feature is set to OFF.
A/CH
CC
VOL
VOL
STATUS
EXIT
4
MENU
Press the CURSOR UP 5or
SLEEP
MUTE
DOWN ▼ buttons to highlight
3
the desired feature.
2
4
SURF
SMART
1
3
PICTURE SOUND
When highlighted, each feature can
be turned ON or OFF using the
4
CURSOR RIGHT 3or LEFT
2 buttons on the remote.
MAGNAVOX
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE CLOSED CAPTION CONTROLS
25
losed Captioning (CC) allows you to
Cread the voice content of television pro-
grams on theTV screen. Designed to help
the hearing impaired, this feature uses on-
screen “text boxes” to show dialogue and
conversations while theTV program is in
progress.
CC Off
Press the CC button on the
CC Off
CC1
remote to display the current Closed
POWER
CH
1
4
2
5
8
0
3
6
1
2
Caption setting.
CH
7
9
A/CH
CC
VOL
VO
CC2
Press the CC button repeatedly
to choose from the four Closed
Caption options (CC Off, CC1,
CC2, or CC Mute). CC Mute will
activate Closed Captioning when the
MUTE button is pressed.
3
STATUS
EXIT
CC Mute
MENU
1
2
SLEEP
MUTE
SURF
SMART
PICTURE SOUND
When finished, press the STA-
TUS /EXIT button to remove the
menu from the TV’s screen.
MAGNAVOX
3
SETTING THE SLEEPTIMER CONTROL
ourTV can be set to automatically turn
Yitself off at a given amount of time.
Press the SLEEP button on the
remote control and the SLEEP OFF
timer display will appear on the
screen.
1
Sleep off
Sleep 15
Sleep 30
Sleep 45
Sleep 60
Sleep 90
Sleep 120
Sleep 180
Sleep 240
Press the SLEEP button repeat-
edly to pick the amount of time
(15, 30, 45, 60, 90, 120, 180, or 240
minutes) before the TV will turn
itself off.
POWER
1
4
2
5
8
0
3
CH
6
2
CH
7
9
A/CH
CC
VOL
VOL
STATUS
EXIT
1
2
MENU
SLEEP
MUTE
NOTE: An on-screen count down will
appear during the last minute before the
TV shuts itself off. If any button is
pressed during the last minute of the
countdown, the Sleeptimer setting will
be cancelled.
SURF
SMART
PICTURE SOUND
MAGNAVOX
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE SMARTPICTURE™ CONTROL
26
hether you’re watching a movie or a
Wsporting event, yourTV has automatic
video control settings matched for your cur-
rent program source or content.
Personal
Movies
Sports
Press the SMART PICTURE but-
Weak Signal
Multimedia
ton on the remote control.The cur-
rent Smart Picture setting will be dis-
played on the screen.
1
POWER
1
4
2
5
8
0
3
6
CH
CH
7
9
MOVIES - Preset picture options
for watchingVideoTapes, or
DVDs.
SPORTS - Preset picture
options for watching sporting
events.
WEAK SIGNAL - Preset pic-
ture options for watching pro-
grams where the reception is not
at its best.
A/CH
CC
VOL
VOL
Press the SMART PICTURE
button repeatedly to select either
PERSONAL, MOVIES, SPORTS,
WEAK SIGNAL, or MULTIMEDIA
picture settings.
STATUS
EXIT
2
MENU
1
2
SLEEP
MUTE
SURF
SMART
PICTURE SOUND
NOTE: The way you choose to set the
Picture Menu Controls will become your
PERSONAL setting.
MULTIMEDIA - Preset picture
options for use with video gaming.
MAGNAVOX
USING THE SMARTSOUND™ CONTROL
he Smart Sound feature allows the lis-
Ttener to select between four different
factory set sound options.
Personal
Press the SMART SOUND but-
Theatre
Music
Voice
ton on the remote control.The cur-
rent Smart Sound setting will appear
in the middle of the screen.
1
POWER
CH
1
4
2
5
8
0
3
6
CH
7
9
Press the SMART SOUND but-
ton repeatedly to toggle between
the four settings. (PERSONAL,
VOICE, MUSIC, or THEATRE)
A/CH
CC
VOL
VOL
2
STATUS
EXIT
MENU
1
2
SLEEP
MUTE
THEATRE - Preset sound
options for watching movies.
MUSIC - Preset sound options
for musical programming where
there is little or no dialogue.
SURF
SMART
NOTE: The way you choose to set the
Sound Menu Controls will become your
PERSONAL setting.
PICTURE SOUND
VOICE - Preset sound options
for programming where heavy
dialogue is present.
MAGNAVOX
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE SMARTSURF™ CONTROL
27
martSurf lets you set up to eight chan-
Snels in a quick viewing list. Then, you
can use the SURF button on the remote
control to switch between differentTV pro-
grams that currently interest you.
Press CH +/– or the Number but-
tons to select a channel to add to
the SURF list.
1
Press SURF while the channel
POWER
CH
1
4
2
5
8
0
3
6
number appears.
2
3
CH
7
9
A/CH
CC
VOL
VOL
Press 3 or 2 to add the channel
to the SURF list or delete it
STATUS
EXIT
MENU
from the list. An on-screen mes-
sage will indicate whether you are
adding or deleting the channel.
Repeat steps 1 through 3 to add
additional channels (up to eight) to
the SURF list.
SLEEP
MUTE
SURF
SMART
PICTURE SOUND
MAGNAVOX
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
28
No Power
Remote Does NotWork
•Check theTV power cord. Unplug theTV,
wait 10 seconds, then reinsert the plug into
the outlet and push the POWER button
again.
•Check that the outlet is not on a wall
switch.
•Check the batteries. If necessary, replace
them with 2 AA Heavy Duty (Zinc
Chloride) or Alkaline batteries.
•Clean the remote control and the remote
control sensor window on theTV.
•Check theTV power cord. Unplug theTV,
wait 10 seconds, then reinsert the plug
into the outlet and push the POWER but-
ton again.
•Be sure the fuse is not blown on the AC
power strip, if one is being used.
No Picture
•Be sure the fuse is not blown on the AC
power strip, if one is being used.
•Check to be sure theTV outlet is not on a
wall switch.
TV DisplaysWrong Channel or No
Channels Above 13
•Repeat channel selection.
•Check antenna connections. Are they
properly secured to theTV's ANT 75Ω
plug?
•Check theTUNER MODE control for the
correct tuner setting.
•Try running the Auto Program feature to
find all available channels.
•Press the CH+ or CH- buttons on the
remote to make sure the correct signal
source is selected (FRONT or Current
Channel).
•Add the desired channel numbers (using
the CHANNEL EDIT control) into the
TV’s memory.
•Check to be sure theTUNER MODES are
set to the CABLE option and run the Auto
Program feature to find all available chan-
nels.
Sound
No
•Check theVOLUME buttons.
•Check the MUTE button on the remote
control.
•If you’re attempting to hook up auxiliary
equipment, check the audio jack connec-
tions located on the front of theTV.
Download from Www.Somanuals.com. All Manuals Search And Download.
CARE AND CLEANING
29
WARNING Concerning Stationary
Images on theTV Screen:
PLACEMENT OF THE TV
• To avoid cabinet warping, cabinet color
changes, and increased chance of set
failure, do not place the TV where tem-
peratures can become excessively hot;
for example, in direct sunlight or near a
heating appliance.
• Be sure to allow a free flow of air to
and from the perforated back cover of
the set.
Do not leave stationary or letterbox
images on screen for extended peri-
ods of time. This can cause uneven
picture-tube aging.
Normal use of the TV should involve the
showing of pictures that contain constantly
moving and changing images that fill the
screen. Be careful not to leave nonmoving
images on screen for extended periods of
time, or to display the same images on
CLEANING
screen too frequently, because subtle ghost • To avoid possible shock hazard, be sure
images can be left on the picture tubes.
Sources of stationary images may be DVD
disks, laser disks, video games, CD-i disks,
videotapes, digital television boxes, broad-
cast channels, cable channels, satellite
channels, and others. Here are some
examples of stationary images (this
is not an all-inclusive list; you may
encounter others in your viewing):
the TV is unplugged from the electrical
outlet before cleaning.
• Regularly dust the TV with a dry, non-
scratching duster to keep the TV clean.
• When cleaning the TV, take care not to
scratch or damage the screen surface.
Avoid wearing jewelry or using anything
abrasive. Do not use household clean-
ers.Wipe the front screen with a clean
cloth dampened with water. Use even,
easy, vertical strokes when cleaning.
• DVD menus—listings of DVD disk
content
• Letterbox black bars—shown at the
top and bottom of the TV screen when
a wide screen (16:9) movie is viewed
on a TV with standard (4:3) aspect
ratio.
• Gently wipe the cabinet surfaces with a
clean cloth or sponge dampened in a
solution of cool, clear water and a mild
soap or detergent. Use a clean, dry
cloth to dry the wiped surfaces.
• Video-game images and score-
• Occasionally vacuum the ventilation
holes or slots in the back cover of the
set.
• Never use thinners, insecticide sprays,
or other chemicals on or near the cabi-
net, as they might cause permanent
marring of the cabinet finish.
boards
• Television station logos—present a
problem if they are bright and station-
ary; moving or low-contrast graphics
are less likely to cause uneven aging of
the picture tube
• Stock-market tickers—presented at
the bottom of the TV screen
• Shopping channel logos and pric-
ing displays—bright and shown con-
stantly or repeatedly in the same loca-
tion on the TV screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
MAGNAVOX LIMITED WARRANTY
Ninety (90) Days Labor & One (1)Year Parts & One (1)Year Display
30
MAGNAVOX warrants this product against
defect in material or workmanship, subject to
any conditions set forth as follows:
adaptation to enable it to operate in any
country other than the country for which
it was designed, manufactured, approved
and/or authorized, or repair of products
damaged by these modifications.
PROOF OF PURCHASE:
You must have proof of the date of purchase
to receive warranted repair on the product.A
sales receipt or other document showing the
product and the date that you purchased the
product as well as the authorized retailer
included, is considered such proof.
•
Damage occurring to product during ship-
ping when improperly packaged or cost of
associated packaging.
•
•
Product lost in shipment and no signature
verification of receipt can be provided.
A product used for commercial or institu-
tional purposes (including but not limited
to rental purposes).
COVERAGE:
(If this product is determined to be defective)
LABOR: For a period of ninety (90) days from
the date of purchase, Magnavox will repair or
replace the product, at its option, at no
charge, or pay the labor charges to any
Magnavox authorized service center.After the
period of ninety (90) days, Magnavox will no
longer be responsible for charges incurred.
PARTS: For a period of one (1) year,
•
Products sold AS IS or RENEWED.
TO OBTAINWARRANTY SERVICE IN
THE U.S.A., PUERTO RICO, OR U.S.
VIRGIN ISLANDS…
Contact Magnavox Customer Care Center at:
1-800-705-2000
TO OBTAINWARRANTY SERVICE IN
CANADA…
Magnavox will supply, at no charge, new or
rebuilt replacement parts in exchange for
defective parts. Magnavox authorized service
centers will provide removal and installation
1-800-661-6162 (French Speaking)
1-800-705-2000 (English or Spanish
Speaking)
of the parts under the specified labor warran- REPAIR OR REPLACEMENT AS PROVIDED
ty.
UNDERTHISWARRANTY ISTHE EXCLU-
SIVE REMEDY FORTHE CONSUMER. MAG-
NAVOX SHALL NOT BE LIABLE FOR ANY
INCIDENTAL OR CONSEQUENTIAL
DAMAGES FOR BREACH OF ANY
DISPLAY: For a period of one (1) year from
the date of purchase, Magnavox will supply, at
no charge, a new or rebuilt active display
device in exchange for the defective display.
Magnavox authorized service centers will pro- EXPRESS OR IMPLIEDWARRANTY ON
vide removal and installation of the parts
under the specified labor warranty. (PTV
screens carry a thirty (30) day replacement
warranty.)
THIS PRODUCT. EXCEPTTOTHE EXTENT
PROHIBITED BY APPLICABLE LAW,ANY
IMPLIEDWARRANTY OF MER-
CHANTABILITY OR FITNESS FOR A PAR-
TICULAR PURPOSE ONTHIS PRODUCT IS
LIMITED IN DURATIONTOTHE DURA-
TION OFTHISWARRANTY.
EXCLUDED FROMWARRANTY
COVERAGE
Your warranty does not cover:
•
Labor charges for installation or setup of
the product, adjustment of customer con-
trols on the product, and installation or
repair of antenna systems outside of the
product.
Some states do not allow the exclusions or
limitation of incidental or consequential dam-
ages, or allow limitations on how long an
implied warranty lasts, so the above limita-
tions or exclusions may not apply to you. In
addition, if you enter into a service contract
agreement with the MAGNAVOX partner-
ship within ninety (90) days of the date of
sale, the limitation on how long an implied
warranty lasts does not apply.
•
Product repair and/or part replacement
because of improper installation, connec-
tions to improper voltage supply, abuse,
neglect, misuse, accident, unauthorized
repair or other cause not within the con-
trol of Magnavox.
•
A product that requires modification or
This warranty gives you specific legal rights. You may have other rights which vary from state/province to
state/province.
Magnavox, P.O. Box 520890, Miami, FL 33152 (402) 536-4171
Download from Www.Somanuals.com. All Manuals Search And Download.
|