Elite 5m & Elite 4m
Operation manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Introduction...................................... 2 Using your Chart ........................... 12
Unit Controls............................................2 Chart Menu............................................12
Inserting microSD cards ..........................3 Waypoints, Routes, Trails......................13
Routes Screen.......................................14
Trails Screen .........................................18
Orientation.............................................20
Basic Operation............................... 4
Setup wizard............................................4
Page menus ............................................4
Working with menus ................................5 Settings .......................................... 21
Cursor......................................................7 Settings Menu........................................21
Goto cursor..............................................7 System...................................................21
Advanced Mode ......................................7 Navigation..............................................23
Standby mode .........................................7 Chart......................................................25
Restore defaults ......................................8 Alarms ..................................................26
Pages................................................ 9 Index............................................... 28
Steer Page...............................................9
Chart Page ..............................................9
Specifications ................................ 30
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Unit Controls
Getting Started
LIGhT/POwer: controls backlight
level and turns unit on/off
To turn on/off the unit, press and
hold the LIGhT/POwer key for
three seconds.
Turn unit
on/off
KeYPAD: controls cursor & selects
items on menus
Press the zOOM In and zOOM
OUT keys at the same time to set
a Man Overboard waypoint. Your
system will automatically create an
active route back to the MOB way-
point. You must cancel navigation
to terminate the function.
PAGeS: allows you to select a page to
view
Man
Overboard
waypoint
MenU: opens settings, context and
page menus
enTer: finalizes menu selections;
save waypoint at cursor position
Adjusting This unit has 10 backlight levels.
the Press the LIGhT/POwer key to
backlight switch backlight levels.
MOB: press and hold both Zoom keys
to create a Man Overboard waypoint
zOOM Keys: used to zoom in/zoom
out
Muting
Audio
Select Mute Audio from the
System menu and press enTer.
microSD slot: insert a blank microSD card to
save screen captures; or insert a microSD map-
ping card to use mapping data (See illustration
on page 2)
Select GPS Source from the
Selecting a
GPS
Source
System menu and press enTer.
Select internal or external and
press enTer. (elite-5m only)
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Inserting microSD cards
Carefully slide the microSD card into the slot until it clicks into place.
To remove, carefully push in the card until it clicks out of place.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
Setup wizard
Pages
The Setup wizard will appear when the unit is
turned on for the first time. To choose your own
settings, do not run the setup wizard.
This unit has two pages: Chart and Steer.
To restart the Setup wizard, restore defaults.
Page menus
nOTICe
The Steer and Chart pages have menus that can
only be accessed when those pages are displayed.
This manual covers several units. Some screen-
shots may differ from what you see on your
screen. Your unit, however, will function in a
similar manner.
Chart menu
Chart page
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
Steer menu
Steer page
working with menus
There are several menu types used to make
adjustments to options and settings, including
scrollbars, on/off features and dropdown menus.
Accessing the Settings menu
Scrollbars
Select the scrollbar and press the key-
pad left (decrease) or right (increase).
Settings menu
On/Off features
Accessing menu items
Select an on/off menu item
and press enTer to turn it
on/off.
The keypad and enTer key are used to select
menu items and open submenus. Use the keypad
to highlight the desired item and press enTer.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
Dropdown menus
entering text
After accessing the drop-
down menu, press the keypad
up/down to select the desired
item and press Enter.
Some functions, like naming a waypoint, route or
trail, will require you to input text.
Switches letters
to uppercase/
lowercase
nOTe: Press the Menu key to Exit
menus.
Switches
keyboard between
Alpha and
QWERTY layout
Dialogs
Dialogs are used for user input or for presenting in-
formation to the user.
To input text:
Depending on the type of infor-
mation or entry, different meth-
ods are used to confirm, cancel
or close the dialog.
1. Use the keypad to select the desired
character and press enTer.
2. Repeat Step 1 for each character.
3. When entry is completed, highlight OK
and press enTer.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
Cursor
Advanced Mode
Enables advanced features and
settings.
The keypad moves the cursor around the display,
allowing you to scroll the map and select map
items. Press MenU and select Return to vessel to
clear the cursor.
The following features are enabled when Advanced
mode is turned on:
•
•
Navigation menu
Goto cursor
Alarms (Enables arrival, off course and
anchor alarm options)
Allows you to navigate to the cursor.
•
•
NMEA 0183 Output
1. Move the cursor to a desired location
and press MenU.
Units (Enables distance, speed, depth,
temperature, and bearings options)
2. Select Goto cursor and press enTer.
Standby mode
Lowers power consumption by
turning off the display.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
Press the Pwr/LIGhT key to access the Backlight
dialog. Select Standby and press enTer.
Press any key to resume normal operation.
nOTe: Leaving your unit in Standby
mode when your boat is not is use will run
down your battery.
restore defaults
Resets unit options and settings
to defaults.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Pages
Direction to
waypoint
Compass
Current Track
Current location
Depth contours
Waypoint
Navigation
information
Zoom
Range
Current location;
distance to cursor
Your location
Steer Page
Chart Page
The Steer page has a compass that shows your
current track, the direction to your destination, and
a digital data navigation panel.
Consists of map that moves in real-time as you
move. By default, the map is shown from a birds-
eye view with North at the top of the screen.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Pages
Overlay Data
Displays selected overlay data on the sonar page.
To select overlay data:
Overlay data
1. From the chart page, press MenU.
2. Select Overlay data and press enTer.
3. Select Configure and press enTer.
Show
Enables/disables the display of overlay data, allow-
ing you to remove overlay data from the screen
without deleting the selected overlay data con-
figuration.
4. Press Menu and select Add. Press
enTer.
5. Select a category from the Configure
Items to show screen. Press enTer.
6. Press MenU and select Return to
overlay.
Configure
7. Press MenU, select Done Configuring
and press enTer.
Used to select overlay data to be displayed on the
screen.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Pages
Customizing Overlay Data
Access the Overlay Data configuration menu to
make adjustments to the size and/or location of
overlay data on the display.
Press Menu from the Configure Item Locations and
Sizes screen to access the menu.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Chart
Chart Menu
Using your Chart
This section covers chart operation, which includes
saving, loading and navigating, waypoints, routes
and trails and using chart menus, context menus
Press Menu from any Chart pages to open the
Chart menu.
and submenus.
Chart menu
New Waypoint
Creates a waypoint at your current location or at
the cursor position.
When the cursor is on the screen, waypoints will
be saved at the cursor position; conversely, if the
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Chart
cursor is not displayed onscreen, waypoints will be
saved at your current position.
waypoints, routes, Trails
Used to create, edit, navigate and delete way-
points, routes and trails.
Press the keypad left/right to toggle between
waypoint, routes and trails tabs.
Waypoints menu
Edit
Waypoints
Allows you to edit the name,
icon and latitude/longitude.
of a selected waypoint.
Waypoints Screen
menu
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Chart
New
Sort
Controls how the waypoints list will be
sorted — by name or by nearest.
Creates a new waypoint
at the cursor or vessel
position. You can also select
waypoint name, icon and
latitude/longitude from the
new waypoint menu.
routes Screen
Used to create, edit, navigate and delete routes.
Use the keypad to highlight the Routes tab to ac-
cess the Routes screen.
Show
Displays the selected waypoint on
the map.
Goto
Allows you to navigate to a waypoint.
Routes menu
Routes screen
Creating a route
Delete and Delete All
Routes can be created by inserting waypoints from
the waypoints list or by using the cursor to posi-
tion new points on the chart. You also can add way-
points to a route by selecting them from the chart
screen.
Delete is used to delete a
selected waypoint. Delete
All deletes all waypoints.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Chart
Shows selected route
waypoint on the chart
4. Press Menu, select Add to End and press
enTer.
Inserts waypoint between
existing route waypoints
5. Highlight Waypoint from list and press
enTer.
6. Select the desired waypoint and press
enTer.
7. Press Menu and select Add to end to add
another waypoint to the route.
Adds waypoint to
end of the route
8. When the route is complete, press MenU,
Remove waypoint
select Stop Editing and press enTer.
Route waypoint
menu
9. Select Save and press enTer.
Starts navigation
to the selected
route waypoint
Controls how waypoints
are listed
To create a route from waypoint list:
1. Press MenU from the Routes screen.
2. Select New... and press enTer.
3. Press the keypad down to select the
Leg name field and press enTer.
Add waypoints from list or Points from chart.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Chart
Creating a route using points from chart:
1. Repeat Steps 1-4 from the instructions
for Creating a route from waypoint list.
2. Select Points from chart and press
enTer. The chart screen will appear.
3. Move the cursor to the desired location.
Press enTer to set a waypoint.
4. Repeat Step 3 to add more route
waypoints.
5. Press MenU and select Stop adding.
Press enTer.
6. Highlight the Save button and press en-
Ter.
Routes menu
Navigating a route
2. Select Start and press enTer.
Routes can be navigated in for-
ward or reverse.
3. Select Forward or Reverse and press
enTer.
1. Select the desired route
on the Route screen and
press MenU.
4. Press MenU and select Return to Chart.
Press enTer.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Chart
To cancel navigation:
To access the Edit or New Route menu, select Edit
or New on the Routes menu and press enTer.
1. Press Menu from the chart screen.
2. Select Navigation and press enTer.
3. Highlight Cancel and press enTer.
4. Select Yes and press enTer.
To finalize changes on the Edit or New Route
menus, highlight the Accept button and press en-
Ter.
Displayed
Edit and New Route menus
Used to show/hide a route on the display, which
prevents the screen from being cluttered by too
many routes
Used to edit/create routes, route names and to turn
on/off the route display. That allows you to display
only desired routes on the map.
Delete and Delete All
Delete is used to delete
individual routes. Delete
All, removes all routes.
Turns on/
off route
Use keypad to select
Route leg window
display
on map
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Chart
Trails Screen
Used to create, edit, navigate and delete trails. Use
the keypad to highlight the Trails tab to access the
Trails screen.
Trails menu
Trails menu
Trails screen
Creating trails
To create a trail:
When creating a trail you can customize the trail
name and color from the New Trail.
1. Select New and press enTer. The
New Trail will appear.
2. Use the keypad to highlight Record and
press enTer to make the trail active/
inactive.
3. Select Save and press enTer.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Chart
Edit and New Trail menus
To save a trail as a route:
Allows you to edit/create trails, select trails names,
trail color, trail display and the trail being recorded.
You can also convert a trail into a route from the
Edit Trail menu.
1. Highlight the desired trail on the Trails
screen and press enTer. The Edit
Trail menu will appear.
2. Highlight Create Route and press
enTer. The Edit Route menu will
appear.
3. Highlight Done and press enTer.
4. For navigation instructions refer to the
Navigating a route segment.
Turns on/
off trail
recording
Turns on/
off trail
display
on map
Displayed and Record
Displayed allows you to show/hide trails on the
map display, preventing the screen from being
cluttered with trails.
Edit Trails menu
The Record command allows you to record or
resume recording a desired trail.
Navigating a trail
A trail must be saved as a route before it can be
navigated.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Chart
Delete and Delete All
Overlay Data
Delete is used to remove
individual trails. Delete
All removes all trails.
Allows you to select data (course over ground, etc)
to be displayed on top of the Chart screen.
Orientation
Allows you to select North Up or Course Over
Ground (COG) as the map orientation.
Overlay data
Overlay data setup is covered in the Pages section.
Settings
North Up
COG
Accesses the Chart settings menu.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Settings Menu
System
Accesses to installation and configuration settings Adjusts unit settings like language, mute audio
for your unit.
and advanced mode.
Enables
advanced
features and
settings
Settings
menu
(Advanced mode
only)
System menu
Displays
software
information
(Advanced mode
only)
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Set Language
GPS Source (Elite-5m only)
Selects the antenna your unit will
use for GPS. You will use the built-
Selects the language used on
menus and text boxes.
in GPS antenna unless you have a LGC-16W exter-
nal antenna (p/n: 000-00146-001).
Mute Audio
Turns on/off unit audio, like key beeps, alarm
sounds, etc.
Advanced Mode
Enables features and settings only available with
unit in Advanced Mode. Advanced Mode is cov-
ered in the Basic Operation section.
Time
Used to set local time, and
time and date formats for
your unit.
Restore Defaults
Switches the unit back to default
settings.
GPS Status
Browse Files
Monitors the location of
satellites in view and the
quality of the unit’s satellite
lock-on.
Allows you to view a list of the files
saved to the microSD card.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Saving Screenshots
navigation
You can save screenshots to a microSD card by in- Controls Arrival Radius and Off Course distance
serting a microSD card into the card slot and press- settings and is used to turn on/off WAAS/MSAS/
ing Power and then Zoom (+). You must view files EGNOS.
on a computer or other microSD compatible de-
vice.
nOTe: You cannot save screenshots to a
Navionics card.
About
Displays software information about this unit. Be-
fore attempting a software update, you can check
the version of software your unit is using by access-
ing the About screen.
Navigation Settings menu
Lowrance periodically updates unit software to
add features and improve functionality. To see the
rance.com.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Bearings
Arrival Radius
Controls whether bearing will be calculated using
True North or Magnetic North. Magnetic North
should be used when navigating with a compass
course or heading; otherwise use the default set-
ting, True North.
Sets the arrival radius threshold for the Arrival
alarm. The arrival alarm will sound when your ves-
sel comes within a selected distance (arrival radius)
of the destination waypoint.
Off Course Distance
Magnetic Variation
Sets Off Course Distance threshold for the Off
Course alarm. When the selected off course dis-
tance is exceeded, the Off Course alarm will sound
when the alarm is enabled.
Controls whether magnetic variation will be calcu-
lated using Automatic or Manual settings. Magnet-
ic variation is the angle between magnetic north
and true north. The automatic setting reconciles
the variation for you.
WAAS/MSAS/EGNOS
Turns on/off the Wide Area Augmentation System
(WAAS), Multi-Functional Satellite Augmentation
System (MSAS) and European Geostationary
Navigation Overlay Service (EGNOS).
wArnInG: You should only use the
Manual magnetic variation setting if you
have variation information from a veri-
fied source.
All three systems help increase GPS accuracy for
different parts of the world.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
COG Extension
Chart
A line extending from the front
of the current position icon that
is used to estimate distance and
time of arrival.
Controls map data used on the chart screen as well
as display settings like grid lines, waypoints, routes
and trails.
Grid Lines
Displays base values for
latitude and longitude, making
it easier to get a general idea of
your location on the latitude/
longitude scale.
Chart Settings menu
Chart Data
Selects map data that will be used on the Chart
display (Lowrance or Navionics regional map). Go
to Navionics.com to see a full selection of available
charts.
Waypoints, Routes and Trail displays
From the Chart Settings menu, you can turn on/off
waypoint, route and trail display properties. Turn-
ing off display properties allows you to get a better
view of the map, if the screen becomes cluttered
with waypoints, routes and/or trails.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Waypoints, Routes, Trails
Alarms
Accesses the Waypoints, Routes & Trails screen.
sounds alarm when you are within a selected
distance of your destination (Advanced
Mode only)
Arrival
sounds alarm when course exceeds
selected off-course threshold (Advanced
Mode only)
a
Alarms
Off
Course
Enables alarms and selects alarm thresholds. Arriv-
al, Off Course and Anchor alarms are only available
in Advanced mode.
sounds alarm when vessel moves a selected
distance (Advanced Mode only)
Anchor
Units
Allows you to select the unit of measure used by
the unit. Unit options vary depending on whether
the unit is in basic or advanced mode.
Alarms
menu
Basic Mode
Advanced Mode
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
NMEA 0183 Output
Allows users to select NMEA 0183 sentences the
unit will use when connected to a VHF radio or
other NMEA 0183 device.
Simulator
Simulates GPS activity. Simulations can be
customized on the Simulator options menu.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Chart Page 9
New route menu 17
New trail menu 19
New Waypoint 12
NMEA 0183 27
A
L
Chart settings 25
Chart settings menu 25
COG Extension 25
Cursor 7
About 23
Advanced Mode 7
Alarms 26
Anchor 26
Arrival 26
Off Course 26
Anchor alarm 26
Arrival alarm 26
Arrival Radius 24
Language 22
M
O
Magnetic Variation 24
Man
Overboard
waypoint 2
Man Overboard way-
point 2
Map Orientation 20
Menus 5
microSD cards 3
Mute Audio 22
D
Off Course alarm 26
Off Course Distance 24
On/Off features 5
Orientation 20
Overlay Data 10
Configure 10
Customizing 11
Selecting 10
Show 10
Dialogs 6
Dropdown menus 6
E
B
Edit route menu 17
Edit trail menu 19
Bearings 24
Browse Files 22
G
C
N
Goto cursor 7
GPS Source 22
GPS Status 22
Grid Lines 25
P
Cancel navigation 17
Chart 25
Chart Data 25
Chart Menu 12
Navigation settings 23
Navigation settings
menu 23
Page menus 4
R
Restore defaults 8
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Restore Defaults 22
Route display 25
Routes 14
Trail display 25
Trails 18
Creating 18
Delete 20
New 14
Show 14
Sort 14
Creating 14
Delete 17
Displayed 17
Navigating 16
Displayed 19
Navigating 19
Record 19
Save as route 19
Turn unit on/off 2
S
Saving Screenshots 23
Scrollbars 5
Settings Menu 21
Setup wizard 4
Simulator 27
Software updates 23
Standby mode 7
Steer Page 9
U
Unit Controls 2
Units 26
W
WAAS/MSAS/EGNOS
24
Waypoint display 25
Waypoint list 15
Waypoints 13
Delete 14
System settings 21
T
Text entry 6
Time 22
Edit 13
Goto 14
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Elite 5m
General
GPS
microSD (microSDHC high capacity cards are not
compatible
Mapping card slot
GPS Antenna
5.4”H (134mm) x 6.8”W (174mm); 6”H (152mm)
with bracket
Case Size
Display
16 parallel channel (internal); optional external
GPS antenna sold separately
(5”diagonal) Enhanced Solar MAX™ 480x480 color
TFT LCD
Mapping
compatibility
Fishing Hot Spots, NauticPath
(Hotmaps, Premium and Gold)
&
Navionics
Backlight
Cold cathode fluorescent lamp (10 levels)
NMEA 0183 Output
Waypoints, Routes Up to 3000 waypoints, 100 routes and 100
& Trails retraceable plot trails
Communications
Shared devices
supported
VHF and Autopilot through NMEA 0183
Power
Power
Requirement
12V
Voltage Input
Current drain
10 to 17V
Typical: .75A
3-amp Automotive (not supplied)
Fuse type
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Elite 4m
General
GPS
microSD (microSDHC high capacity cards are not
compatible)
Mapping card slot
GPS Antenna
5.6”H (144mm) x 3.7”W (94.3mm); 6.4”H (164mm)
with bracket
Case Size
16 parallel channel (internal); optional external
GPS antenna sold separately
Display
(3.5”diagonal) 320x240 (256 color) TFT LCD
White LED (10 levels)
Mapping
compatibility
Fishing Hot Spots, NauticPath
(Hotmaps, Premium and Gold)
&
Navionics
Backlight
Communications
NMEA 0183 Output
Waypoints, Routes Up to 3000 waypoints, 100 routes and 100
& Trails retraceable plot trails
Shared devices
supported
VHF and Autopilot through NMEA 0183
Power
Power
Requirement
12V
Voltage Input
Current drain
10 to 17V
at 13.5V (150mA)
3-amp Automotive (not supplied)
Fuse type
Download from Www.Somanuals.com. All Manuals Search And Download.
Databases Limited Warranty
Navico Databases License Agreement
“We”, “our”, or “us” refers to Navico, the manufacturer of this product. “You” or “your” refers
to the first person who purchases the product as a consumer item for personal, family, or household use.
The Databases Limited Warranty applies to the one or more databases that your product may contain.
We refer to each of these as a “Database” or together as the “Databases.” Your product may thus include
the “WBS Database” which contains worldwide background surface mapping data, the “SmartMap
Database” which contains inland mapping data, or other Databases.
We warrant to you that we have accurately compiled, processed, and reproduced the portions of the
source material on which the Databases are based. However, we are under no obligation to provide
updates to the Databases, and the data contained in the Databases may be incomplete when compared to
the source material. WE MAKE NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND ABOUT
THE ACCURACY OF THE SOURCE MATERIAL ITSELF, INCLUDING BUT NOT LIMITED
TO IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE.
If there is a defect in any Database, your exclusive remedy shall be, at our option, either a refund of
the price you paid for the product containing the defective Database or a replacement of such product.
WE WILL NOT UNDER ANY CIRCUMSTANCES BE LIABLE TO ANYONE FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR OTHER INDIRECT DAMAGE OF ANY KIND.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitations or exclusions may not apply to you.
This warranty does NOT apply in the following circumstances: (1) when the product has been serviced
or repaired by anyone other than us; (2) when the product has been connected, installed, combined,
altered, adjusted, or handled in a manner other than according to the instructions furnished with the
product; (3) when any serial number has been effaced, altered, or removed; or (4) when any defect,
problem, loss, or damage has resulted from any accident, misuse, negligence, or carelessness, or from
any failure to provide reasonable and necessary maintenance in accordance with the instructions of the
owner’s manual for the product.
THIS IS A LEGAL AGREEMENT BETWEEN THE END-USER WHO FIRST PURCHASES
THIS PRODUCT AS A CONSUMER ITEM FOR PERSONAL, FAMILY, OR HOUSEHOLD USE
(“YOU”) AND NAVICO, THE MANUFACTURER OF THIS PRODUCT (“WE”, “OUR”, OR “US”).
USING THE PRODUCT ACCOMPANIED BY THIS LICENSE AGREEMENT CONSTITUTES
ACCEPTANCE OF THESE TERMS AND CONDITIONS.
IF YOU DO NOT ACCEPT ALL TERMS AND CONDITIONS, PROMPTLY RETURN THE
PRODUCT WITHIN 30 DAYS OF PURCHASE. PLEASE RETURN USING THE ENCLOSED UPS
SHIPPING LABEL AND INCLUDE: PROOF OF PURCHASE, NAME, ADDRESS, AND PHONE
NUMBER. YOUR PURCHASE PRICE AND ANY APPLICABLE TAXES WILL BE REFUNDED.
PLEASE ALLOW 4-6 WEEKS TO PROCESS YOUR REFUND.
1.
This License Agreement applies to the one or more databases that your product may
contain. We refer to these singly as a “Database” and together as the “Databases.” Your
product may thus include the “WBS Database” which contains worldwide background
surface mapping data, the “SmartMap Database” which contains inland mapping data,
or other Databases.
2.
The Databases that your product may contain are licensed, not sold. We grant to you the
nonexclusive, nonassignable right to use these Databases for supplemental navigation
reference purposes, but only as long as you comply with the terms and conditions of
this License Agreement. We reserve the right to terminate this license if you violate any
aspect of this License Agreement. You are responsible for using official government
charts and prudent navigation for safe travel.
3.
4.
The Databases housed in your product are protected by the copyright notices appearing
on the product or its screen(s). You may NOT modify, adapt, translate, reverse engineer,
decompile, disassemble, rent, lease, or resell any Database, and you may NOT create
derivative works based upon any Database or its contents. Any unauthorized reproduc-
tion, use, or transfer of a Database may be a crime and may subject you to damages
and attorney fees.
This License Agreement will terminate immediately without prior notice from us if you
fail to comply with or violate any of the provisions of this Agreement. Upon termina-
tion, you will promptly return all products containing one or more Databases to us.
We reserve the right to make changes or improvements in our products from time to time without
incurring the obligation to install such improvements or changes on equipment or items previously
manufactured.
This warranty gives you specific legal rights and you may also have other rights which may vary from
state to state.
Your remedies under this warranty will be available so long as you can show in a reasonable manner
that the defect occurred within one (1) year from the date of your original purchase, and we must receive
your warranty claim no later than 30 days after such 1-year period expires. Your claim must be substanti-
ated by a dated sales receipt or sales slip.
5.
6.
Prices and programs are subject to change without notice.
This License Agreement shall be governed by the laws of the State of Oklahoma and
comprises the complete and exclusive understanding between you and us concerning
the above subject matter.
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Obtain Service… …in the USA:
Contact the Factory Customer Service Department. Call toll-free:
800-324-1356
8 a.m. to 5 p.m. Central Standard Time, M-F
Navico may find it necessary to change or end shipping policies, regulations and special offers at any time. They reserve the right to
do so without notice.
…in Canada:
Contact the Factory Customer Service Department. Call toll-free:
800-661-3983
905-629-1614 (not toll-free)
8 a.m. to 5 p.m. Eastern Standard Time, M-F
…outside Canada and the USA:
Contact the dealer in the country where you purchased your unit. To locate a dealer near you, see the instructions in
paragraph number 1 below.
Accessory Ordering Information
LEI Extras is the accessory source for sonar and GPS products manufactured by Lowrance Electronics. To order
Lowrance accessories, please contact:
rance.com, and look for the Dealer Locator; or, consult your telephone directory for listings.
3) Canadian customers: Lowrance Canada, 919 Matheson Blvd. E. Mississauga, Ontario L4W2R7 or fax 905-629-3118.
Call toll free in Canada, 800-661-3983, or dial 905 629-1614 (not toll free), 8 a.m. to 5 p.m. Eastern Standard Time, M-F.
Download from Www.Somanuals.com. All Manuals Search And Download.
Visit our website:
© Copyright 2011
All Rights Reserved
Navico Holding AS
*988-10165-001*
Download from Www.Somanuals.com. All Manuals Search And Download.
|