Operating instructions
TV
Concept L 32
Concept L 32 Basic
Concept L 26
Concept L 26 Basic
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control - TV functions
Sound off/on
Switch on/off
- on standby
Switch over to operate VCR
Switch over
to operate DVD player
TV
SV
VCR
T-C
DVD
Switch over to operate TV set
Picture menu on/off
Sound menu on/off
Call timer list
DISC-MENU
SP/LP
Radio on/off (1
Menu "Additional functions" on/off
Set picture format
RADIO
000
Select station directly
/in the menu: enter numbers
or letters
abc
def
mno
ghi
jkl
Call AV selection
pqrs
EPG
tuv
AV
wxyz
PIP
Electronic Programme Guide
Now&Next Programme Info (ꢀ
PIP on/off (picture in picture)
(ꢀ
Status display on/off
/in the menu: hide menu
Show/hide menu
Teletext on/off (ꢀ
Open index
/in the menu: info texts on/off
P+
P+/P– Select station up/down
for PIP: Position of the PIP picture
/ in the menu: select/set
V–/V+ Volume down/up
V–
V+
OK
OK
Station list on
Red button: (ꢀ
P–
/in the menu: confirm/call
freeze picture on/off
Blue button: (ꢀ programme info
off/on
Yellow button: (ꢀ previous station
Green button: (ꢀ
Standard settings
for picture/sound
Select station down
/ in the Wizard: back
Select station up
Freeze picture off
Direct recording
Freeze picture on/off
Freeze picture on
(ꢀ with DVB-T stations in GB
different function. The coloured
keys do not work as described
with DVB-T stations in GB,
but they operate as described
on page ꢀ7 (Digital Teletext).
(1 Radio only for DVB reception
if broadcast by the station
Alternative
remote control
3 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Control Unit
LOEWE.
Open control
panel
–
+
Audio input right
Audio input left
Video input (AVS)
S-VHS connection (AVS)
Mains switch
Call the menu,
in the menu: up/down ��
Station down,
in the menu: left �
(i.e. for camcorders)
Station up,
in the menu: right �
Headphones connection
Display:
red = standby
green = operation
orange = operation without screen display
(radio mode, EPG data capture or timer recording)
- 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections to rear panel
Common
Interface (1
(CI-Slot)
89374.003
AUDIO IN
L
AUDIO OUT
220-240V~
50/60 Hz
ANT-SAT
/350 mA
C
R
L
R
13/18
ANT-TV
/80 mA
V
HDTV/P
C
IN
VGA/XG
SD/HD-COMPONENT IN AUDIO DIGITAL
b/P /r IN OUT
AV
2
AV
RGB
1
YUV
(
)
(
)
C
b
C
Y
HDMI DVI
A
SE RV ICE
5
V
/
Center Audio input (analogue)
Audio input left/right (analogue)
Antenna/cable PIP tuner (1
or satellite antenna (1
Audio output left/right (analogue)
Socket for
Component
video inputs
(Cb/Pb–Cr/Pr–Y)
Antenna/cable
analogue/digital (1
(tuner 1)
Euro-AV-
socket 1
Euro-AV-
socket 2
power cable
Service socket
VGA/XGA input
HDMI (DVI) input
Digital audio output
Digital audio input
Antenna output PIP tuner (1
connect to tuner 1
(1 Set-specific equipment and retrofitting options for CI-Slot, PIP and satellite tuners, see pages 41 and 42.
5 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
Thank you!
Transporting
At Loewe, we combine the highest standards of technology, design and user
friendliness. This applies equally for TV, video and accessories.
Only transport the unit in an upright position. Hold the set by the top and bot-
tom edges of the housing. The LCD screen is made of glass and/or plastic and
may break if not handled carefully. Should the LCD screen become damaged
or should the liquid crystal begin to leak, then it is imperative you wear rubber
gloves when removing the set. Should the liquid come in contact with your skin,
thoroughly rinse with water immediately.
Your new TV set is ideally equipped for the TV standard of the future - ”HDTV”
(High Definition Television). With its high-resolution screen and the future-proof
digital interfaces HDMI, you have the option to view HD content with excellent
picture quality. It therefore carries the European quality mark ”HD ready”.
Digital TV is steadily spreading via terrestrial reception, in the cable network and
via satellite. Loewe supplies sets equipped with DVB-T and DVB-C (DVB-C not
for GB). A digital satellite tuner (DVB-S) can be retrofitted. The DVB integrated
within the TV set is operated via the TV set menus using the remote control.
We have designed this TV set so that it is easy to operate by using menus.
Information about settings in menus is shown automatically; this enables you to
understand the context quickly.
You will find the answers to many of your technical queries in the index of your
TV. If you want to operate the TV, you can access functions directly from the in-
dex. This saves you from having to read through detailed operating instructions
and is the reason why this operating manual only explains the most important
operating steps.
Installation options
As a desktop unit
The foot is included in delivery.
As a wall-mounted unit
• Wall holder WM55 for Concept Lꢀ6 / Concept Lꢀ6 Basic,
Loewe order no. 65497 A00.
• Wall holder WM54 for Concept L3ꢀ / Concept L3ꢀ Basic,
Loewe order no. 65498 A00.
Integrated features
The maximum equipment is described in these operating instructions. Functions
indicated by are not available in all TV sets. Menu contents may differ from
the ones shown, depending on how your TV is equipped.
You can display how your set is equipped in the “Integrated features“ index
(press the INFO button in the TV mode if no menu is displayed; the “Integrated
features“ menu item is also displayed in the index before the initial letter A).
Scope of delivery
• LCD-TFT TV set
• Mains cable
• RC4 remote control with ꢀ batteries
• Table stand
• Marketing and service card
• These operating instructions
- 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
Note on the LCD screen
The TV set with an LCD screen you have purchased meets the highest quality
requirements and has been tested for pixel errors. Despite the utmost caution
in production of the displays, it cannot be totally ruled out that some of the
pixels might be defective for technological reasons. Please understand that such
effects cannot be considered a unit defect as defined by the warranty as long as
they are within the limits specified by the standard.
Cleaning
Use only a soft, clean, damp cloth to clean the TV set, the screen and remote
control (do not use any caustic or abrasive cleaning agents).
Disposal
Packing and box
You have chosen a long lasting technical product of very high quality. We have
paid a fee to authorised recyclers who will collect the packing from your dealer
for disposal, pursuant to domestic regulations. Nevertheless, we recommend
you to keep the original box and packing material for optimum protection if you
have to transport the set.
The set
Attention: The EU directive ꢀ00ꢀ/96/EC regulates the proper
way to recycle, handle and utilise used electronic devices.
Hence, all used electronic devices are to be disposed of
separately. Please do not dispose of this set in the normal
household rubbish.
You may return your used set free of charge at designated
recycling centres or at your specialist dealer whenever you purchase a new,
comparable set. You can find out more about recycling (also for countries out-
side the EU) from your local government.
7 -
Download from Www.Somanuals.com. All Manuals Search And Download.
For your safety
For your safety and to avoid unnecessary damage to your TV set, please
read and observe the following safety instructions:
•
Prevent any metal parts, needles, paper clips, liquids, wax or the like from
getting into the TV set through the air venting slits in the rear panel. This
can lead to short-circuits and possibly to fire. If something should get into
the inside of the TV set, pull out the plug immediately and notify customer
service.
•
•
This TV set is designed exclusively for reception and reproduction of video
and audio signals.
This equipment is designed for domestic and
office environments and must not be used
in rooms with high humidity (e.g. bathroom,
sauna) or high concentrations of dust (e.g.
workshops). If the equipment
•
Never remove the back of the TV set yourself. Repair and servicing of your
TV set should only be carried out by authorised TV technicians.
•
Place the TV set on a level, firm base. The set should not protrude at the
front when installing in cabinets or shelves.
Only use original accessories if possible, e.g. Loewe wall holders and stands.
Never let children handle the TV unattended.
Do not allow children to play in the immediate vicinity of the TV, they could
knock, shift or pull it over and injure someone.
Never leave the TV on unsupervised.
is used in the open air, ensure
that it is protected against
moisture (rain, drips, splashes,
sprayed water or dew). Do
not place any containers filled
•
•
Do not install the TV where there may be vibrations. Vibrations can lead to
material stress.
LOEWE.
with liquids or lit candles on
top of the TV.
High levels of moisture and
concentrations of dust cause leakage currents in the equipment, which can
lead to danger of electric shock or fire.
The manufacturer‘s warranty is only valid for use in the specified permissible
environment.
Pull out the power and antenna cables during thunderstorms. Surge volt-
ages caused by lightning strikes can damage the TV through the antenna
system and the mains. Also remove the antenna and mains plugs in long
periods of absence.
•
•
The mains plug of the TV set must be easily accessible so that the set can be
disconnected at any time.
•
•
If you have moved the TV set out of the cold into a warm environment, leave
it standing for about an hour since condensation may form.
Lay the mains cable in such a way that it will not be damaged. The power
cable may not be kinked or laid over sharp edges, not stood on and not ex-
posed to chemicals, the latter also applies to the device as a whole. A mains
cable with damaged insulation can lead to electric shocks and is a fire risk.
This equipment must only be connected to a mains power supply which has
the same voltage and frequency as that specified on the rating plate; use
the power cable provided. Incorrect voltages can damage the equipment.
•
When removing the mains plug, pull the plug housing and not the cable.
The wires in the plug could be damaged and cause a short circuit the next
time it is plugged in.
•
Like all electronic equipment, your TV needs air for cooling. Obstruction
of the air circulation can cause fires. Therefore the air vents on the back
must always be kept free. Please do not place newspapers or cloths on/over
the TV.
The rating plate of the TV is on the rear of the set.
If the TV is placed in a
10 cm
cabinet or on a shelf,
leave at least 10 cm at
the sides and 10 cm at
the top to ensure suf-
ficient air circulation.
Position the set so that it
is not exposed to direct
sunlight and additional
heating from radiators.
10 cm
10 cm
- 8
Download from Www.Somanuals.com. All Manuals Search And Download.
First installation
Remote control
Connection
Batteries
Power mains
To insert or change the batteries, press on the arrow. Slide the battery compart-
ment cover downwards and remove it. Insert LR 03 alkaline-manganese batter-
ies (AAA) and ensure that the + and - ends are positioned correctly.
Connect the TV set to a ꢀꢀ0-ꢀ40V/50- 60 hertz power outlet. Plug the small
plug of the mains cable into the mains socket on the rear of the TV set; plug the
large mains plug into a mains socket.
Antennas
+
Plug the antenna plug of your antenna/cable system or the room antenna for
DVB-T into the ANT-TV socket.
+
Then push the cover back on from the bottom.
Note on disposing batteries
The batteries provided contain no harmful materials such as
cadmium, lead or mercury.
Regulations concerning used batteries stipulate that batteries
may no longer be thrown out with the household rubbish.
Deposit any used batteries free of charge into the designated
collection containers set up at commercial businesses.
220-240V~
50/60 Hz
ANT-TV
ANT-SAT *
Setting up the remote control for operating the TV
TV
R
TV
Push the TV button.
How to operate other equipment is described as of page 36.
9 -
Download from Www.Somanuals.com. All Manuals Search And Download.
First installation
If the reception conditions are good, then a room antenna may be used for
DVB-T. Passive and active room antennas are available on the market. The
power is supplied for an active antenna via the antenna connection. For auto-
matic programming or in “TV Menu – Connections – Antenna DVB – Antenna
DVB-T,“ the distribution voltage (5 volts) is to be set correspondingly.
It may be practical to use a nondirectional antenna. If the location is outside the
normal transmitting range, then a unidirectional antenna may also be used to
improve the reception quality.
Using the Conditional Access module
(Only for sets with CI slot)
In order to be able to receive encrypted digital stations, a Conditional Access
module (CA-module(1) and a Smart Card(1, if necessary, must be inserted into
the corresponding slot of your TV set. You can find the Common Interface slot
(CI-Slot) on the back of your TV set, see the illustration on page 5.
1. Make sure the TV set is switched off with the mains switch on the set.
You can find out more on the digital stations that can be received in your area
at your specialist dealer.
ꢀ. First push the Smart Card into the CA-module as far as it will go. Insert
it so that the side with
the golden contact chip
faces the side of the module
printed with the supplier‘s
brand logo. Printed arrows
indicate how to insert the
If a set was retrofitted with a PIP tuner, then plug the antenna into the antenna
input of the PIP tuner and connect the PIP tuner output with the ANT-TV socket
(Tuner 1). See illustration on page 5.
Set-specific equipment and retrofitting options for CI-Slot, PIP and satellite tun-
ers, see pages 41 and 4ꢀ.
card. Also follow the instal-
lation instructions included
with the Smart Card.
If a Digital Satellite Tuner has been retrofitted, connect your satellite antenna
system to the ANT-SAT socket.
3. Push the CA module carefully into the slot contact
When laying the cable, use the cable clips affixed beneath the TV set.
side first. When you are standing in front of the TV
Eject button
set, the logo on the CA module must face the rear.
Make sure the module is not twisted in the process.
Do not use force.
When the module locks, the eject button is pressed
outwards.
Handling the fabric hose (optional)
Use the fabric hose for tidy laying
of the power cables, antenna
cables or cables of other electronic
CA module
components and lay the hose with
the cables to the connecting
sockets. This provides you with
an elegant solution when laying
(1
The CA-module and the Smart Card are not included
in the scope of delivery of this set; you can usually
obtain them at your specialist dealer.
cables. The diameter of the fabric
hose increases when you push it to-
gether lengthwise (see illustration). This makes it easier for you to push through
cables with plugs.
Switching on
Switch the TV set to standby with the Mains switch on the
front behind the flap.
The red indicator on the set now lights up (standby mode).
You can obtain the fabric hose as an accessory from your Loewe dealer or Loewe
Customer Service.
From standby (red LED lights) it is best to switch on the TV
with the blue On/Off button or a numeric button on the
remote control.
- 10
Download from Www.Somanuals.com. All Manuals Search And Download.
First installation
If you only receive one satellite ...
Automatic programming
8. In the following menu, specify whether the station search should take place
in the high and low band (“Yes“) or only in the low band (“No“).
Note: For most satellites, a station search is required in both bands.
9. For the low band and high band, the standard frequencies 9750 MHz (9.75
GHz) and 10600 MHz (10.6 GHz) are preset.
Automatic programming of the TV set is started the first time you switch it on.
Follow the menus.
By pressing in one of the arrow directions, you can choose the
OK
settings ...
If your satellite antenna is equipped with an LNC (LNB) with a divergent
oscillator frequency, specify the corresponding frequency for low and high
band respectively.
... and confirm your settings by pressing OK. You then go to
the next menu.
OK
Note: The correct display of the received frequencies in the “TV menu – Set-
tings – Stations – Manual adjustment“ depends upon this setting.
10. You should receive a picture with sound with the settings previously made
(only for ASTRA 1 and HOTBIRD). Then press OK.
11. In the “Pre-programming“ menu, select the factory-set pre-programming to
programme the satellite stations quickly.
Back to the previous menu.
1. First you have to select the menu language.
ꢀ. By pressing the OK button, you can call the menu “Connect antenna
cable(s)“. If you want to receive digital stations via satellite, then choose
“DVB-S“ - confirm using the yellow
To ensure all stations that can be currently received are searched for and
saved, select “No“ at this point.
Initial installation
coloured key. If you also want to re-
Connect antenna cable(s)
ceive digital terrestrial stations (DVB-
Symbol rates: The standard symbol rates ꢀꢀ000 and ꢀ7500 are preset. If you
would like to receive stations with different symbol rates, specify the cor-
responding values here using the numeric buttons on your remote control.
1ꢀ. Press OK to obtain an overview of the settings with which the automatic
programming is to take place.
13. Press the OK button again and the station search will start. The TV set
searches for, sorts and saves all the TV stations that can be received, accord-
ing to your settings and the antennas connected.
14. When the TV stations are saved, you will receive a corresponding message.
15. Press the OK button and the set then searches for the radio stations.
16. The TV set searches for, saves and sorts all radio stations which can be
received with your antenna system.
17. Then log on your video equipment, decoder and audio system using the
connection wizard and connect these to the TV according to the connection
diagram displayed. If you want to connect other equipment later, you can
find information as of page 29.
Antenna cable(s) for:
Antenna/cable (analogue)
DVB-T
to antenna socket(s):
ANT TV
T), then select “DVB-T“. Also select
“Antenna/cable (analogue)“ - this
way the standard analogue stations
can also be searched for and saved.
If you can receive digital stations
ANT TV
DVB-C
ANT TV
DVB-S
ANT SAT
Connect/disconnect
Back
OK
Proceed
from the cable network, then select “DVB-C“ using the yellow coloured key.
3. For the country-specific station sorting and for presettings for DVB-T and
DVB-C, enter the location at which the TV set is operated.
4. If you have selected “DVB-T“, you then reach the menu “Antenna DVB-T“. If
you use an active antenna, then select “yes (5V)“.
5. If you have selected „DVB-C“, you generally leave the symbol rates and
modulation types unchanged.
If other symbol rates are used in your cable network for broadcasting,
enter the values with the numeric buttons of the remote control. If only one
symbol rate is used, enter the same value for both symbol rates. If other
modulation types are used for broadcasting in your cable network, select
them in the menu. If only one modulation is used, select „none“ for modula-
tion type ꢀ.
You can repeat the initial installation at any time, e.g. after moving house. Call
the index using the INFO button (in the TV mode, if no menu is opened). Select
the index item “Repeat initial installation“ (you will find this listed separately
before the letter A). Press OK to start the initial installation.
If necessary, ask your specialist dealer about the necessary settings for your
cable network.
Note: For DVB-T stations in GB the stations are tied to “Logical Channel Num-
bers” -- “LCN” and sorted from 1-799. Digital stations without “LCN” are stored
from 800 onwards. Analogue stations are stored from 1001.
6. In the “Select satellite installation“ menu, make the selection that corre-
sponds to your satellite antenna installation.
Note: If you have any questions on how your satellite antenna installation
is configured and on the antenna settings, consult your antenna installer or
your specialist dealer.
Station sorting
Note: not with DVB-T stations in GB.
You can change the station sorting that was carried out automatically later at
any time, see “TV menu – Settings – Stations – Change stations“.
7. Select the satellite the antenna is directed at, such as ASTRA1.
11 -
Download from Www.Somanuals.com. All Manuals Search And Download.
First installation
Daily operation
Directing DVB-T antenna
Switching on/off
Note: not with DVB-T stations in GB.
Your TV is equipped with an eco-standby power supply unit. On standby, the
power consumption drops to low power. If you want to save even more electric-
ity, switch the set off with the mains switch. However, please bear in mind that
EPG data (electronic programme guide) will be lost and programmed timer
recordings will not be performed by the TV.
If you use a room antenna to receive one or more DVB-T stations that have
picture and sound interference, then you should change the location of where
the antenna is set up.
To help you direct your antenna or to help you determine the most suitable loca-
tion to set up the antenna, your TV set has a display for the signal quality C/N
and the signal strength Level.
Switching off
If the TV set is switched on, you can switch it to standby using
the blue ON/OFF button on the remote control. The red lamp
on the TV set lights up. If the orange indicator lights up, a
timer recording is being made, EPG data is being captured or
radio operation without screen display is active.
Consult your specialist dealer to find out which channels and frequency bands
(VHF or UHF) are used to broadcast the digital TV stations in your area.
On any one channel, several digital stations are broadcast.
Select a TV channel
1. Call the “TV menu“ via the MENU button.
Switching on the TV set
ꢀ. Use 34to select “Settings“, then use 6to select the menu line
underneath.
From standby, it is best to switch the set back on using the
blue On/Off button or by using the numeric buttons of the
remote control (0 – 99).
3. Select “Stations“, then use 6to select the menu line underneath.
TV menu
INFO
END
Settings
The green indicator on the TV set lights up.
Stations
Manual adjustment
Parental lock Timer functions Language
...
Or switch on the TV set with OK, you can then see the station
list and select a station.
OK
4. Select “Manual adjustment“ and call the menu using OK (not possible for
MHEG-5 device versions).
Manual adjustment
Switching the radio on
With the RADIO button on the remote control.
Signal source
Channel
DVB-T
E 05
DVB-C Antenna/cable (analogue)
RADIO
Frequency
Name
177.50 MHz
est
T
Bandwidth
7 MHz
C/N 96
Level 99
END
If you switch off the TV set using the mains switch
indicator no longer lights up.
on the set, the
5. For digital stations, select “Signal source – DVB-T“.
6. Use the numerical buttons to specify the corresponding channel number.
Depending on the channel selected and country, the system automatically
sets the corresponding bandwidth of 7 or 8 MHz. You should only change
the bandwidth under special circumstances - if the channel raster in your
area is different from the standard.
If the TV set is switched off via the mains switch, you have to switch it into the
standby mode fi rst via the mains switch and then switch it on using one of the
above mentioned methods.
When you receive a digital station, the system displays the signal quality
C/N via a bar/numeric value and the signal strength via Level. The anten-
na‘s direction or position is best when the largest values possible are
displayed (long bar) for the signal quality and signal strength.
7. Direct the antenna so that the largest numerical value/bar size is reached.
8. If no signal is found in the channel set, you can start the frequency search
run by pressing the blue button within the band selected (VHF or UHF).
9. Check the other channels one after another on which digital stations are
broadcast terrestrially in your area.
For the weakest station, direct the antenna so that the maximum numerical
value/bar size is achieved.
10. After you position or direct the antenna, we recommend to search for all the
stations using the “Search wizard“ (TV menu – Settings – Stations – Search
wizard).
- 1ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Daily operation
... via the station list
Changing stations
Use OK to call the station list.
OK
... with the P+/P- buttons on the remote control
Station list
COMP. IN
Numerical
6
7
8
9
3SAT
S–RTL
N–TV
DSF
P+
HDMI/DVI
VGA
AVS
DVD
VCR
VIDEO
ARD
ZDF
SAT.1
RTL
VOX
V—
V+
OK
OK
Stations up/down
10 TM3
11 PRO7
12 RTL 2
13 WDR 3
14 BR
15 HR
16 MDR 3
17 N 3
P–
0
1
2
3
4
5
OK
When changing, the station display is visible for a few seconds.
41 ZDF
Eifellandschaft
21:00 – 21:45
Language/sound selection
21:00 - 21:45 Eifellandschaft
OK
END
Switch to ...
Scan stations
Change stations
Change sorting
If additional languages are broadcast with DVB stations, then the set displays
the language/sound selection under the station display. Call the language/sound
selection by using the green coloured key and select using 56.
0
9
... Select station
Select the station (if possible, the selected station will be
OK
displayed as a small picture)
or ...
... with the numeric buttons of the remote control
AV
The set has a dynamic memory with 430 (with DVB 1680) station memory
locations. If up to 9 stations are stored, you only need to enter one digit; up to
99 stations, two digits are needed; up to 999 stations, three digits are needed
(refer to the station list to see how many stations have been stored).
wxyz
... select with numeric buttons
call selected station.
OK
1 digit stations
Press buttons 0 -9 for one second, and the station
changes instantly.
Blue coloured key: sort alphabetically/according to bouquets/
numerically.
pqrs
long
Station list
COMP. IN
Alphabetical
Or press button 0 – 9 briefly, the station then changes
after ꢀ seconds (the station changes immediately when
only 9 stations are saved).
CNN INT.
CAM
HDMI/DVI
VGA
AVS
DELUXE
DSF
DVD
VCR
2- and 3-digit stations
EUROSPRT
pqrs
a
OK
After briefly pressing the fi rst numeric button(s), keep the
last numeric button pressed for one second, the station
then changes immediately.
ARD
HOT
HR
short short long
BR-ALPHA
BR3
KIKA
21:00 - 21:45 Eifellandschaft
Or press all numeric buttons briefly, the station then
changes after ꢀ seconds (the station changes immediately
if up to 99 or 999 stations are saved).
OK
END
Switch to ...
Scan stations
a
z
... Select letter
Change stations
Change sorting
For an alphabetical display: Enter letters with the numeric button (like on a
mobile phone keypad), select with 6534and call with OK.
For bouquet display (sorting according to broadcasting chains, only for DVB
stations, not for DVB-T stations in GB): Enter bouquet number, select with
6534and call with OK.
4 digit stations
Press the four numeric buttons briefly, the station then
changes immediately.
tuv
all short
Call last viewed station (for DVB-T stations in GB)
C
Digital DVB-T stations are indicated by T , DVB-C stations by
stations by S . Encrypted stations are additionally indicated by
and DVB-S
.
You can switch back and forth quickly between two stations
using this button.
OK
Ask your specialist dealer about decoders or the use of a CA module and a
Smart Card for the reception of encrypted stations.
13 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Daily operation
TV menu
Sound
Bass
6
INFO
END
Basics about the menu operation
Menus are called via the MENU button or via the button for special menus and
can be hidden by using these buttons or by using the END button. The menu is
displayed in the bottom section of the screen. At the top, you can see additional
information for the menu point selected. In the menus, navigate by using the
cursor5634. You can make settings by using 34. When you exit the
menu, the settings are adopted.
OK
OK
Set the bass tones by using 34.
If you want to make other sound settings, move up with 5
to “Bass“ and select with 34, e.g. “more...“. You can also
move up further to “Sound“ by using 5and select other set-
tings in the TV menu (such as, picture settings).
TV menu
INFO
END
Example of the menu operation
Sound
OK
more ...
Bass
Treble
We shall demonstrate how to navigate with the menus using the TV menu as an
example. You can see which buttons you can use in the dark blue field on your
TV set.
OK
Use OK to call additional sound settings.
TV menu
Sound
INFO
END
Bass
Headphone volume Headphone sound Auto vol
...
Loudspeaker sound
Stereo
MENU
Open TV menu (in TV mode).
Picture
OK
Here you can adjust among other things: Contrast, colour, brightness,
picture adjustment, sharpness, picture format.
Select the sound setting using 34, e.g. “Auto volume“ and ...
TV menu
INFO
END
Sound
sound Auto volume
off
AV audio signal
...
Maximum volume
Balance
OK
... use 6to select the auto volume option.
TV menu
Sound
INFO
END
Auto volume
off
on
INFO
END
OK
TV menu
Picture
Picture adjustment
Use 34to select “on“ and activate the auto volume.
Sound
...
Recording
Connections
Settings
TV menu
Sound
INFO
END
Auto volume
on
Select the function in the TV menu, e.g. “Sound“ (for sound
settings). Use 4to move the menu points displayed on the
right into the dark blue field; use 3to move the menu points
displayed on the left.
off
OK
END
Press the END button to hide the menu.
Apart from the TV menu shown here, other menus can be opened in TV mode
as follows:
INFO
END
TV menu
Picture Sound
Treble
Settings
Recording Connections
...
Call the Sound menu directly.
Call the Picture menu directly.
Select the sound function below with 6or OK; you will then
OK
see a list of the sound settings.
Quick calls for teletext subtitles, personal text pages, head-
phone volume, scan stations and to move the picture up and
down.
TV menu
INFO
END
Sound
Treble
4
more ...
Bass
Green coloured key: Call standard settings for picture and
sound.
In the sound settings, also select the function with 34, e.g.
“Bass“ (for increasing or reducing the bass tones).
TV menu
OK
Using the volume control, you can also open other sound
settings, such as Sound via, Sound adjustment, Sound effects
and Loudness.
INFO
END
Sound
more ...
Treble
Bass
6
OK
The key 5or OK must be pressed for the duration of the
To set the bass tones, use 6or OK to select the setting bar
OK
volume display for this.
underneath.
- 14
Download from Www.Somanuals.com. All Manuals Search And Download.
Daily operation
Use 6to select the line below, for example “Search wizard“.
For the info system ...
OK
Search wizard
For each menu point, an info text is displayed at the top of the picture to help
you with the setting. This saves you from having to refer back to the operating
instructions. We shall demonstrate this using the station search option as an
example:
Use this menu to search for stations automatically once certain settings
have been made.
If you want to search for stations with other than the displayed
settings, select the "Change settings" menu.
MENU
Call the TV menu.
OK
Select “Settings“.
Settings
TV menu
INFO
END
Settings
Here, you can search for the stations automatically or manually as well
as set the menu language, timer functions, parental lock, on-screen
displays, etc.
Stations
Search wizard
Manual adjustment Change stations
The info text explains how you are to proceed.
Upon delivery, the TV set is configured so that the info texts are always dis-
played (Automatic info “yes“). In this case, you can hide the info texts by using
the INFO button.
You can also configure the TV set so that you call the info texts when needed by
using the INFO button (Automatic info “no“). You can find the setting to switch
the automatic info option on or off via “TV menu under Settings – Miscellane-
ous – On-screen displays – Automatic info – yes/no“.
INFO
END
TV menu
Settings
Stations
Recording
ections
Picture Sound
Conne
...
In this example, you can see the options available after “Settings“.
If you want to search for new stations, for example, use 6to
OK
select “Stations“ in the line below.
Stations
The menu contains the automatic station search and the manual station
setting. You can re-sort stations, enter and change station names and
delete stations.
TV menu
Settings
INFO
END
Stations
Search wizard
Parental lock Timer functions Language
...
Mi
The info text indicates which settings you can make in “Stations“.
15 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Daily operation
For example, you want to have the TV set switch off automatically:
Select the index item “Switch off“ – “Automatic“.
For the index ...
Using the index, you can access many operational functions directly. You can
also find a great deal of information on technical terms about television. Before
the alphabetical sorting, you can find the menu language option, the list of
features integrated into the TV set and the repeat initial installation option.
You can set your TV set to switch off to stand-by mode once or every
day at a given time.
Index
Switch off
INFO
Call the index in the TV mode (without any other on-screen
OK
Automatic
displays).
Manual
Symbol rate*
Teletext
You can select your language for operating the TV set.
Activate
Character set
FLOF
END
OK
3
3
Previous/next letter
Activate
... Select letter
P+ Page /
a
z
P–
Index
OK
OK
Use the OK button to call “Switch off“ – “Automatic“.
Language
Integrated features
Repeat initial installation
*
Switch off today only
Access code
Active window (PIP)
Automatic channel programming (ACP)
If you want your TV set to switch off once automatically (to stand-by
mode) select "yes" and enter the time.
END
AV (Audio/Video)
OK
3
3
Previous/next letter
Page /
Activate
P+
P–
a
z
... Select letter
Info on the index item selected is visible at the top of the picture. If the OK
symbol is displayed in the line selected, you can use the OK button to access
the menu directly and carry out settings or selections.
TV menu
Settings
INFO
END
Timer functions
Switch off today only
no
This is how to select the index item:
Switch off daily One-time reminder
...
Wake
abc
Enter the first letter using the numeric buttons on the remote
control (like on a mobile phone keypad);
or
wxyz
The corresponding menu “Timer functions“ is displayed (in the TV menu – Set-
tings). You can now choose between “Switch off today only“ and “Switch off
daily“ and enter the time.
OK
use 34to go to the previous/next letter,
or
OK
use P+/P– to scroll up or down through the pages
OK
and use 65to go from line to line.
- 16
Download from Www.Somanuals.com. All Manuals Search And Download.
Daily operation
Setting the sound
Picture settings
Open the Picture menu
Volume and other frequently used sound settings
INFO
END
Picture
Picture adjustment
normal
3
3
Contrast
...
Colour Brightness
Sharpness
mo
Setting the volume
OK
Volume
24
...
use 34to select the picture function to be set and use
OK
6for the related selection ...
by using 5or OK, you can call other sound settings ...
OK
OK
OK
INFO
END
Picture
Colour
6
Volume
24
Sound adjustment
Loudness
Sound effects
and select using 34...
OK
... and use 34to set/select.
Sound adjustment
normal
Sound effects Loudness
Volume
V
Picture settings: Picture adjustment, Contrast, Colour, Brightness, Sharpness.
Under “more ...“, you can find settings for Picture format, Move picture up/down
use 6for the related selection/setting...
and Auto format.
Sound adjustment
Pop
normal
Classic Speech
no
OK
Direct control on TV set
... and use 34to make the selection/setting there.
On page 4, you can find an illustration of the control unit located on the set.
Sound adjustment allows you to adjust the sound characteristics to the station‘s
sound. The Sound effects settings allow you to expand a Dolby Pro Logic Signal
to a virtual surround signal by using “Dolby Virtual“; by using “Panorama“, you
can enhance the foundation of the stereo sound virtually for the loudspeakers.
Switching station on the TV set
Station up: with the button +
+
Sound off/on
–
Station down: with the button –
Sound off;
Additional functions via the menu
Sound on: Press button again or adjust volume.
In the radio or TV operating modes, you can make settings for Volume,
Brightness, Contrast, Picture format and Stations. “Service“ is intended for the
customer service department.
Sound off
Sound on
use to call the menu
Other sound settings:
Direct control on TV set
Operating mode
TV
Call the Sound menu
Volume
Brightness Contrast
Picture fo
INFO
END
Sound
Treble
4
more ...
Bass
use – or + to select the function to be set
–
+
Direct control on TV set
g mode Volume
24
use 34to select the sound function to be set and use 6for
OK
Brightness Contrast Picture format Stat
the related selection ...
INFO
END
Sound
Bass
6
use for the related setting/selection
Direct control on TV set
Volume
18
OK
and use 34to select/set.
Sound settings: Treble and bass. Different menu items are displayed depend-
–
+
use – or + to set/select.
ing on the connected audio device (AURO, hi-fi amplifier). Under “more ...“ you
will find the sound selection for loudspeakers and headphones, auto volume,
headphone volume, AV audio signal, maximum volume and balance.
Use to move one level up; you can use – or + to select
other functions.
17 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating modes – TV
For the status display, the DVB station providers may offer additional selection
options for each station. Thus, the corresponding colour key or the TEXT button
is displayed:
TV
In initial installation and daily operation, the TV set is in TV mode. This is also
the case when none of the other modes of operation, such as EPG, Teletext, PIP
or Radio, have been selected.
Each of these operating modes has a separate menu with separate functions for
the coloured keys. Call the menu via the MENU button.
Red: channel selection for multi-channel providers.
Green: language/sound selection.
Yellow: time selection.
How the coloured keys work in TV mode
Blue: protection of minors.
Note: The coloured keys do not work as described below with DVB-T stations in
GB, but they operate as described on page ꢀ7 (Digital Teletext).
TEXT
DVB subtitles.
Red: the TV picture freezes. Pressing this button again starts
the picture moving again.
If you press one of the coloured keys during the status display or you press the
TEXT button, the related selection menu is displayed.
The status display subtitles refer only to the “DVB subtitles“ and are not
provided by all stations. The options you see depend on the particular station
(many stations broadcast subtitles via teletext).
The status display is displayed automatically when a new programme begins
with options different to the previous one.
Green: Call personal settings/factory settings for picture and
sound, save picture and sound settings as personal settings.
INFO
END
Standard settings pict./sound
Call up personal settings
Activate
OK
Call up factory settings Store as pers
OK
Yellow: call last station viewed. You can switch back and forth
quickly between two stations using this button.
Notes:
•
In the sound mode, Mono! means that you have switched manually from
stereo to mono, for example.
The selection menus are only available as long as the status display is
displayed. You can call them again at any time by pressing the END button
on your remote control.
Blue: call programme info.
•
1
ARD
Eifelland
14:30 - 15:15
Calling the index
INFO
Calling the index
You can select your language for operating the TV set.
END
Programme info
Detailed info
14:43
OK
Detailed info (teletext)
Programme preview (t
Index
OK
Language
Integrated features
Repeat initial installation
*
Show status display
Access code
END
Show/hide status
Active window (PIP)
Automatic channel programming (ACP)
AV (Audio/Video)
1
ARD
14:42
Language/sound selection
Eifellandschaft
14:30 - 15:15
Stereo
END
Alarm time 20:00
Sleep timer 23:00
OK
3
3
Previous/next letter
Page /
Activate
P+
P–
a
z
... Select letter
In the line above, you can see the name of the station and the sound mode. Dis-
played below are additional options (Time, Sound mode, Alarm time and Sleep
timer) that can be selected in the “TV menu – Settings – Miscellaneous – On-
screen displays“.
You can find more information on the index on page 16.
- 18
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating modes – TV
Call additional functions
TV menu
MENU
Select additional functions such as Teletext subtitles, Personal
Call up the TV menu
teletext pages, Headphone volume, Scan stations and to move
the picture up and down.
END
INFO
TV menu
Picture
Picture adjustment
Sound
...
Recording
Connections
Settings
INFO
END
Additional functions
Teletext subtitles
You will find a description of the picture and sound settings on page 17. The TV
menu offers other options for recording, connections and settings of the TV set.
OK
Personal teletext pages Headphone volume
Call timer overview
For a recorder that is logged in, you can find the following
If timer recordings have been programmed, you will see when
which station is recorded here.
menus in the “Recording“:
Recording wizard - to programme new timer recordings
• Via EPG • Via teletext • Manual
Timer list
Fri 12.09./14:12
12.09. 18:00-18:30 3SAT Die Köchin, die Putzfrau und d
You will find further information about timer recording on page 30.
Timer list
Here you will find a list of programmes programmed for recording. You can
change the recording data or delete programmed recordings and programme
new recordings.
TEXT
END
Detail
New recording
Change
Delete
INFO
Pre-record time and Post record time
For recordings without VPS/PDC, set a lead and lag time here so that the pro-
gramme is fully recorded despite any slight differences in the time.
Select picture format
The TV set sets the best picture format automatically when
Auto format is switched on. If you want to set a different
format, press this button until the desired format is selected or
select the format with 34.
Under “Connections“ you will find the following functions:
New devices/modifications (connection wizard)
The connection wizard helps you connect and log in additional equipment such
as video recorders, DVD players/recorders, camcorders/digital cameras, pay TV
decoders, equipment with component signals and digital HDMI/DVI signals.
Picture format
16:9
4:3 Panorama
Cinema Zoom
Antenna DVB (only for sets with DVB)
You can switch the panorama picture over to distortion-free representation on
your TV set. Dark margins are then visible on the left and right of the picture.
• Antenna DVB-T • Antenna DVB-S (1
You can find more information on pages 11 and 12.
Switching over: Keep the
the ”Picture format”
button on the set pressed, at the same time press
button on the remote control briefly.
Digital Link Plus
Transmission of the station data from the TV set to the video/DVD recorder if a
recorder with Digital Link Plus is connected.
Resetting: Press the same button combination again.
Miscellaneous (connections)
Move picture up/down
•
Set AV norm for the connections manually (if it is not recognised automati-
cally).
To make picture subtitles visible, you can use56to move
the picture up or down with the picture formats “Panorama“,
“Cinema“ and “Zoom“.
OK
•
•
“Assign audio digital signals“ to one of the AV sockets.
“Allow switching voltage“ to display the signals of the connected device
immediately on the screen via Euro AV during playback.
RGB insertions at AVꢀ to play back RGB signals at all station storage locations.
Select decoder stations and set sound encoding.
Note: for DVB-T stations in GB you can switch back and forth quickly between
two stations using this button.
•
•
(1 only for sets with DVB-S
19 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating modes – TV
DVB character set
• Western European • Polish • Standard.
Under “Settings“ you will find the following functions:
Stations
Here you can search for and store new stations automatically or manually. With
“Change stations“, you can rearrange and delete the stations and change sta-
tion names (not for DVB-T stations in GB).
DVB subtitles
If the station provides DVB subtitles, then you can have the TV display them
permanently or suppress their display. You can also select between subtitles “for
translation“ or “for the Hearing Impaired“.
• Search wizard • Manual adjustment • Change stations
Parental lock
You can lock the TV “immediatley“, “daily“ for a certain period of time or
“agerelated“ for DVB programmes with age restrictions.
Here, you determine the PIN to enter if you want to watch locked programmes.
1. Call the “TV menu“ via the MENU button.
2. Select the “Settings“ line and confirm using OK.
3. Select the “Miscellaneous“ line and confirm using OK.
4. Select the “DVB subtitles“ line and confirm using OK.
Timer functions
You can have your TV switch off at pre-programmed times or wake you/remind
you with radio or TV. If you are not present at the time, a safety prompt makes
sure the TV switches off again after 5 minutes.
• Switch off today only • Switch off daily • One-time reminder
• Wake up Mon-Fri • Wake up Sat • Wake up Sun • Wake up with
• Wake up signal volume
DVB subtitles
Subtitles off
for impaired hearing
for translation
OK
END
INFO
Note: If you have selected “Subtitles off“, then the set generates an on-screen
display when subtitles are available.
Language
If “your“ menu language is not set, you have to select the “Language“ menu in
a language that you do not understand. Therefore here is a simple way to set
the right menu language:
1. Press the INFO button (index), select the first listing (this is above A).
ꢀ. Call the language selection by pressing the OK button.
3. Now select the desired language and confirm it by pressing the OK key.
4. Hide the menu again with the END button.
By using the END button, you can open the status display and you can display
the subtitles again by using the TEXT button.
•
•
Call the status display by pressing the END button, if it is not yet displayed.
When the status display is visible, press the TEXT button.
Select the desired language and confirm using OK. The presetting changes
for the current programme.
Miscellaneous (settings)
On-screen displays
You can set the duration and position of the station and status display, define
the content of the status display and switch the automatic info texts on or off:
• On-screen display time • On-screen display position • Programme title
• Sound mode • Time • Alarm time • Sleep timer • Automatic info
•
•
Which subtitle languages can be selected depends on the provider.
The automatic shortlist is determined by the menu language and the selec-
tion made in the “DVB subtitles” settings menu.
•
By pressing the END button, you can hide the menu again.
Time and date
Note: DVB subtitles are not available when Digital Teletext is being displayed.
If you receive teletext, the set registers the time and date. These are required for
timer recordings, timer functions and EPG. If you do not receive teletext, then
you have to enter the date and time; you should not switch off the set using the
mains switch since the settings will then be lost.
DVB software
Update of DVB software via satellite (1.
DVB subtitles
• Subtitles off • Subtitles for the Hearing Impaired
• Subtitles as translation for foreign language programmes
(1 only for sets with DVB-S.
- ꢀ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating modes – TV
Removing the CA module
Searching for new software
(Only for sets with CI slot)
If you want to carry out a manual search for new software, proceed as follows:
1. Call the TV menu using the MENU button.
ꢀ. Confirm the “Settings” using OK.
1. Switch the TV set off with the mains switch.
ꢀ. Remove the cover from the back of the set on the
upper left.
3. Press the eject button at the module slot; the CA
module is unlocked.
3. Confirm the “Miscellaneous” using OK.
4. Remove the CA module from the set.
4. Select “DVB software” and press OK.
CA module
Update digital TV software
Current version: V3.x.x
Inserting a new CA module
After you insert a new CA module (CI module(1 is
displayed in the menu) and switch the TV set on, the
following dialogue is displayed:
You can search for a new software version with OK.
5. If you start the search using OK, the set checks if there is a new software
version available.
Autom. station search
Your TV set has detected a new CI module. This requires a station
search for all new receivable stations.
6. If there is a new version available, the set generates an on-screen message.
Update digital TV software
After you press the OK button, the system starts the wizard to carry out the
automatic station search.
Current version: V3.x.x
Check the proposed search parameters and let the set search for new stations.
New version: V3.1.0
Calling the CA module menu
Downloading software
Here you can call up information on the inserted Conditional Access module and
the Smart Card. To do this, use the MENU button to call the TV menu, select the
line “Settings”, “Miscellaneous” and then the entry “CI module - xxx” (in place
of “xxx” stands the name of the provider which is output by the Smart Card. The
term CI module(1 displayed in the menu refers to the CA module. The content of
this menu depends on the particular supplier of the CA module.
1. If you press OK in the dialogue above, you can decide whether you want to
download the new software immediately, when you switch off the set or not
at all. We recommend you always carry out the update of the digital software.
This is the only way to ensure your set is always up to date.
ꢀ. If you do decide to update, the software is initialised on your set and you are
informed of the status with a grey bar.
Note: This menu is only available for digital stations.
Do not switch your set off during this time. This process may take up
to one hour. You will be informed when the process is completed.
Installing new DVB software
To ensure your DVB-S receiver is always performing at the state of the art, newly
developed software versions are made available from time to time; these are
broadcast via satellite and can be automatically installed on your set (only pos-
sible via ASTRA1).
3. After the software is updated, you will be asked to switch your TV set off and
back on again using the on/standby switch.
If the update was not carried out, you will be asked several times when you
switch on the set whether you want to carry out this update.
Software is recognised automatically
The set can determine whether a new software version is available. This occurs
at night when your EPG is automatically updated. For this, your TV set has to re-
main in the standby mode (do not switch off using the on/off button on the set).
If a new software version has been found, the set will indicate this with an on-
screen message the next time the set is switched on: You can decide whether or
not you want to download the new software.
(1 CA module has established itself as the usual market name.
This cannot be taken into consideration in the menu yet
Confirm using OK, so that the new software can be loaded and installed via
satellite. Continue as set out in the “Downloading software” section.
ꢀ1 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating modes – PIP
Select the station of the TV picture (main picture)
Picture in picture (PIP)
Note: The coloured keys do not work as described below with DVB-T stations in
GB, but they operate as described on page ꢀ7 (Digital Teletext).
The bar/frame has to be white. If not, press the green col-
oured key. Then select the station as usual.
Note: For GB sets, you switch from the green bar/frame to the
white by using the PIP key. The next time you press the PIP
key, PIP is switched off.
Picture in picture displays are possible if the set has an analogue PIP tuner or a
digital satellite tuner in addition to the analogue TV cable tuner. You can have
a PIP tuner or a digital satellite tuner retrofitted. Set-specific equipment and
retrofitting options for CI-Slot, PIP and satellite tuners, see pages 41 and 42. If
there is no other tuner installed, you can use PIP (AV-PIP) when playing a video
recorder or DVD player. For a retrofitted PIP tuner, the following PIP displays are
possible: Main picture analogue – PIP picture analogue, Main picture digital
– PIP picture analogue. The following is not possible: Main picture digital – PIP
picture digital, Main picture analogue – PIP picture digital.
For “Split screen,” the PIP picture is displayed on the right side of the screen.
Both pictures share the screen in two equal halves. For the “Small PIP” setting,
a small picture is displayed in the TV picture.
The green bar/frame indicates that the control commands have an effect on the
PIP picture. The white bar/frame means that the control commands have an ef-
fect on the main picture. Use the green coloured key to switch between the PIP
picture and the main picture, for example to change stations.
41 ZDF
Eifellandschaften
21:00 – 21:45
PIP scan in the PIP picture
The frame or bar between the pictures is green for the time being.
The bar/frame has to be green. If not, press the green col-
oured key.
Start scanning the stations using the blue coloured key. The
bar/frame turns blue.
PIP
Show/hide PIP picture
PIP picture as freeze picture
The bar/frame has to be green. If not, press the green col-
oured key.
The stations now change automatically. Stop scanning the stations by using the
blue coloured key. The bar/frame turns green again.
If you press the red coloured key, the PIP picture freezes. Press
again - moving picture.
Interchanging PIP picture/TV picture
The bar/frame has to be green. If not, press the green col-
oured key.
Selecting the station of the PIP picture
The bar/frame has to be green. If not, press the green col-
Interchange the pictures by using the yellow coloured key.
oured key. Then select the station as usual.
1
ARD
Der Wilde Westen
Eifellandschaften
21:15 – 22:15
21:00 – 21:45
41 ZDF
1
ARD
Der Wilde Westen
21:15 – 22:15
- ꢀꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating modes – PIP
Functions in the PIP menu
Position of the PIP picture
In the PIP menu, you can set the PIP type (small picture or split screen) and the
position of the small picture.
Move the PIP picture with the arrow keys to a corner of the TV
OK
picture. In this case, the frame around the PIP picture has to
be green, and there should not be any other displays visible on
the screen.
MENU
Call the PIP menu (PIP must be active, green bar/frame).
TV menu
Settings
INFO
END
PIP
Type
3
3
mall PIP Split screen
Sm
Setting the PIP type
Switch to split screen:
You can have the PIP picture displayed as a small PIP or split screen.
You can have the PIP picture displayed on the right hand side of the screen.
Both pictures share the screen in two equal halves. You will see a coloured verti-
cal bar between the pictures.
Switch to small PIP:
MENU
Call the PIP menu (PIP must be active, green frame).
OK
Select “Type” and then “Small PIP”
OK
Select “Type” and then “Split Screen”.
TV menu
Settings
PIP
INFO
END
Type
Small PIP
TV menu
Settings
Split screen
INFO
END
PIP
Type
For the small PIP, you will see a coloured frame around the PIP picture.
3
3
mall PIP Split screen
Sm
ꢀ3 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating modes – EPG
If programmes are displayed which have not yet started, you can mark these
with the OK button. The TV set then switches automatically to this station at the
given time. When receiving digital terrestrial and digital satellite stations, you
may find that two identical EPG data are displayed in the “EPG (DVB)” menu
for one station. If you call the EPG menu in the EPG mode by using the MENU
button, then select “Station selection,” you can select the duplicate station and
deactivate it by using OK).
EPG - Programme guide
EPG is an electronic programme guide. With this system, you can easily find the
programmes that interest you (sorted according to day, time, stations and
topics). You can mark programmes and programme recordings.
Depending on whether you are receiving analogue stations by cable/antenna or
digital stations, you will have different programme guides.
You have direct access to the selection lines above to pre-select the day, the
time, the station and the topic.
A wizard is activated the first time you use EPG (not with DVB) which guides you
through the necessary settings. Then run the data capture (see next page).
Blue coloured key: Call Select date/time/stations/topics
Using the EPG
EPG (Electronic Programme Guide)
Fri 10.09./14:14
EPG
Switch EPG on/off
Date
Time
Sat 11.09.
Sun 12.09. Mon 13.09.
06:00
Stations
Topics
all
all
EPG (Electronic Programme Guide)
Fri 10.09.
Fri 10.09./14:14
Date
06:00-06:20 ZDF
06:00-06:30 RTL
06:00-06:25 Kabel 1
06:00-06:25 N3
06:00-06:30 BR
06:00-06:30 WDR
06:00-07:10 SuperRTL Infomercials
06:00-07:10 Kinderkan Reif für die Dodo-Insel (25)
14:00-14:20 9LIVE
Comedyserie - Kandidaten mit gewissen Fehlern
Die Blobs
Wunderbare Jahre
Dennis
Extra en español (5)
Goal. Speak English, Play Football
Lokalzeit Südwestfalen
now
all
all
soon 14:00 15:00 16:00 17:0
Time
Stations
Topics
OK
13:20-14:15 Kabel 1
13:30-14:15 H3
13:55-14:20 Kinderkan Blaubär & Blöd (37)
14:00-14:15 ZDF
14:00-15:00 RTL
14:00-15:00 Sat 1
14:00-15:00 Pro7
14:00-14:30 N3
Die Waltons
ARD-Buffet
24 Kabel 1
heute - in Deutschland
Das Strafgericht
Zwei bei Kallwass
Das Geständnis - Heute s...
DAS! ab 2
24 Kabel 1
Reisetraum
14:00-14:20 WDR
Familienserie - Sturzflug
Die kleinen Strolche (10)
END
MENU
Change to programme list
OK
TEXT
P+
P–
END
Detail
Page /
View
Select time
Record
Use 65to select the menu line for the date, time, stations or topics. Use
Select date, ... , topics MENU
0
9
...
34to select within the menu line.
If, for example, you are looking for the next news, select today’s date, “Soon“
under Time, “All“ under Stations and “News“ under Topics.
The programme guide menu is divided into two areas: at the top, you can
make the settings for the programme list (date, ..., topics); on the bottom, the
programme list is displayed. Use the blue coloured key to switch between the
two areas to make your selections.
All programmes currently running are listed initially in the programme list. With
the 65buttons, select the programme you want to watch and switch over
with the OK button.
Brief information is shown below the programme list for some programmes. If
more detailed information is available, you can call it using the TEXT button.
Use P+/P– to scroll up or down through the pages of the programme guide. In
the selection lines for date and time above, you will see the time change when
scrolling; when you scroll further, the date also changes.
When the “Time” line is selected, you can enter the time as of which the pro-
grammes are to be displayed; use the numeric buttons on your remote control
to do this. Always enter four digits, such as 0900 for 9 a.m.
Then you get a list of all news programmes in the programme list below.
EPG (Electronic Programme Guide)
Fri 10.09./14:14
Date
Time
Fri 10.09.
soon
Stations
Topics
all
News
Show Hobby Sport Child Kno
15:00-15:15 Das Erste Tagesschau um drei
15:00-15:05 hr-fernse hessen aktuell
15:00-15:15 ZDF
heute - Sport
16:00-16:05 SÜDWEST Baden-Württemberg Aktuell
16:00-16:15 Das Erste Tagesschau um vier
24 Kabel 1
Nachrichten - News
END
Change to programme list MENU
If you want to mark one of these news programmes, return to the programme
list using the blue coloured key, select the desired news programme by using
65and mark this by using OK.
- ꢀ4
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating modes – EPG
If you want certain stations to be omitted from the programme guide, you can
select and deactivate these via Station selection. Call the station selection by
using the blue coloured key.
In front of the programme’s title, the system places an
. This station is
✓
switched later to this programme when the set is switched on. If the TV is off,
it switches on again automatically at the beginning of the marked programme
if this has been set in the EPG menu. If you are out, a security prompt prevents
the TV set staying on unattended.
First, all stations are marked with the
symbol so that their data is displayed
✓
in the programme guide (precondition: provided EPG data is broadcast for the
Before leaving the upper selection lines using the blue coloured key, select a
specific line. If you have switched back to the programme list, you can change
this menu line using 34without having to leave the programme list.
respective station). Stations indicated by E are analogue terrestrial/cable sta-
tions, stations indicated by
are DVB-T stations, stations indicated by C are
T
DVB-C stations and stations indicated by
are DVB-S stations. These stations
S
are available for evaluation in the programme guide.
Programming recording for recorders
Select the stations you want to omit from the programme guide one after
The programme marked using the 65buttons can be prepared for recording
by pressing the red coloured key. In the following menu, confirm the timer data
or change them as required. Then, a red dot is set in front of this programme in
the EPG programme list as an identification (if timer data is being transferred to
the recorder, no red dot is set). If you select this programme, you can delete it
from the timer using the red coloured key (if the timer data has been transferred
to a recorder, the timer has to be deleted there).
another and deactivate each one by using OK. The
symbol is removed.
✓
Data capture
After these settings or after each time the set is switched off using the mains
switch, the data must first be collected, before switching on the set.
To do this, select the station you have defined as a provider and leave the TV
set switched on for about one hour or switch the set to the standby mode. After
about two minutes in standby mode, the indicator on the set turns orange. The
data acquisition begins and lasts about 1 hour. When data acquisition is termi-
nated, the indicator turns red again. The data are also automatically captured
between ꢀ a.m. and 5 a.m. when the TV is switched to standby.
EPG menu
MENU
Call EPG menu
INFO
END
EPG menu
Select provider
OK
Station select Timer list
Data capture Switc
A prerequisite for data capture is that “Data capture“ is “on“ (for DVB + ana-
logue) in the EPG menu.
You will find the following settings in the EPG menu:
• Select provider • Station selection • Timer list • Data capture
• Switch on TV when marked
Note: If the TV set is switched off using the mains switch or the mains plug is
pulled out, all EPG data are lost.
If, for example, you cannot receive any analogue EPG providers or if you only
use DVB, you should set the data capture to “on (only for DVB)”.
Selecting providers and stations
Switch on TV when marked
If you want to change the provider for analogue TV reception (the station which
transmits EPG data) to have other stations evaluated, you can do this under
“Select provider”.
You can have the TV switched on automatically from standby at the beginning
of the marked programme. If you are not present at the time, a safety prompt
makes sure the TV switches off again after 5 minutes.
Select “Select provider” and call this menu using OK. If the station you want to
switch to is not listed in the “Select provider” list, then use the yellow coloured
key to start the automatic search for stations with EPG data. This takes a while.
Or, if you know the station that transmits EPG data, press the blue coloured key
to compile manually. Select the provider in the station list and adopt it by using
OK and return to the provider selection using 7.
Select the provider in “Select provider” and adopt it using OK. Then a station list
search is performed. The stations offered by the provider are displayed in a list.
ꢀ5 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating modes – Teletext
In Multiple pages scroll using 34. You can see which
multiples pages can be called in the bottom menu line.
Analogue Teletext
OK
Teletext transmits information such as news, weather, sports, programme
previews and subtitles.
Zeitplan
Fußball
10 11 12
–
+
1
2
3
4
5
6
7
8
9
TEXT
Teletext on/off
INFO
Call contents page 100
100 100 ARD-Text
ARD TEXT
10.09.04
14:14:42
Index
> 101
Teletext im Ersten
Call the TOP table
The TOP table is a general list of teletext. You can only call the
OK
Bulmahn: Bildung statt Eigenheim . . . . . . . . 120
Wird auch der Nahverkehr teurer? . . . . . . . . 121
Australien: Keine Zugeständnisse . . . . . . . . 122
Tote bei Zugunglück in Schweden . . . . . . . . 532
table for stations that use the TOP operating system.
Bulmahn: Bildung statt Eigenheim . . . . . . . . 120
Tennis: Haas unterliegt Hewitt . . . . . . . . . . . . 204
Formel 1: Schumacher erneut vorne . . . . . . . 213
Wird auch der Nahverkehr teurer? . . . . . . . .
121
Australien: Keine Zugeständnisse . . . . . . . . 122
TOP table
. .
532
Übersicht
Tagesschau . . 110/112
Wetter. . . . . . . . . . . 170
Sport. . . . . . . 200/600
TV Guide . . . 300/400
Kultur. . . . . . . . .
Gesellschaft . . .
Lotto/Toto . .
500
530
666
Wetter
Vorhersage
. . 204
tagesschau
OK
Wetter. . 213
Städte
Sport 1
Regional
Reisen
Wirtschaft. . . . . . 700
TV Guide
. . 500
Inhalt
tagesschau
ARD heute
int. Städte
. . 530
–
+
Page selection
ARD morgen
Biowetter
666
FS-Sendungen
. . . 700
END
TV Guide 2
more . . .
Many stations use the TOP operating system, some use FLOF (e.g. CNN). Your
TV supports both these systems. The pages are divided into topic groups and
topics. After switching on the teletext, up to 1,500 pages, depending on type of
set are stored for fast access (see technical data on page 40).
OK
View
Use 65to select the topic group.
Select the topic column using 4.
Select the topic with 65and display page with OK.
Page selection with the coloured keys
The coloured bars (in TOP) or the coloured writing (in FLOF) in the next to the
last line show you which coloured keys you can use to scroll to topic groups and
topics.
pqrs
Enter the page number directly
Displaying teletext pages
AV
Stop self-turning pages (HOLD)
Red: back to the previously seen page (not in FLOF)
Green: on to the next page (not in FLOF)
Zoom page: top part - bottom part - normal size (press button
several times)
wxyz
PIP
Yellow: to the next topic (only in TOP and FLOF)
Blue: to the next topic group (only in TOP and FLOF)
TV picture on/off (Split Text)
100 100 ARD-Text
ARD TEXT
10.09.04
14:14:42
Index
> 101
Other page selection options:
Teletext im Ersten
Bulmahn: Bildung statt Eigenheim . . . . . . . . 120
Wird auch der Nahverkehr teurer? . . . . . . . . 121
Australien: Keine Zugeständnisse . . . . . . . . 122
Tote bei Zugunglück in Schweden . . . . . . . . 532
Select one page number specified on the page by using
65(Page Catching)
OK
Formel 1: Schumacher erneut vorne . . . . . . . 213
Tennis: Haas unterliegt Hewitt . . . . . . . . . . . . 204
Formel 1: Schumacher erneut vorne . . . . . . . 213
Tagesschau . . 110/112
Wetter. . . . . . . . . . . 170
Sport. . . . . . . 200/600
TV Guide . . . 300/400
Kultur. . . . . . . . . 500
Gesellschaft . . . 530
Tagesschau . . 110/112
Wetter. . . . . . . . . . . 170
Sport . . . . . . . 200/600
TV Guide . . . . 300/400
Kultur. . . . . . . . . 500
Gesellschaft . . . 530
Lotto/Toto . . . . 666
Wirtschaft . . . . 700
Lotto/Toto . .
666
Wirtschaft. . . . . . 700
Inhalt
OK View
tagesschau
–
+
Page selection
Inhalt
tagesschau
–
+
Page selection
OK
call.
- ꢀ6
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating modes – Teletext
Programme timer recordings
Digital teletext operation (only for MHEG-5 device versions)
A video and/or DVD recorder must be connected and logged in in the connec-
tion wizard. Call the programme pages of the current station in teletext mode
In the GB, the teletext for DVB-T stations is transmitted as per the MHEG-5
standard (standard of the Multimedia and Hypermedia Expert Group). It con-
tains text, graphics, functions and links.
using the Direct recording button
Scroll to the teletext page in which
.
the programme to be recorded is listed if necessary. Select the programme you
want to record by with 65and confirm with the OK button. For “Timer data,”
select the VCR or DVD recorder and whether you want to record once or a series
of times. Confirm with OK.
The operation of these menus depends on the particular provider. Normally after
a station is changed, the provider broadcasting the digital teletext makes an
introductory offer for this service on the screen via menu selection. Follow these
notes.
If no message appears telling you how to switch to digital teletext after switch-
ing to another station, press the TEXT key. If a selection for DVB subtitles is
available, this item must be hidden before.
Teletext menu
MENU
Display teletext menu
100 100 ARD-Text
ARD TEXT
10.09.04
14:14:42
Index
> 101
Teletext im Ersten
Bulmahn: Bildung statt Eigenheim . . . . . . . . 120
Wird auch der Nahverkehr teurer? . . . . . . . . 121
Australien: Keine Zugeständnisse . . . . . . . . 122
Tote bei Zugunglück in Schweden . . . . . . . . 532
Tennis: Haas unterliegt Hewitt . . . . . . . . . . . . 204
Formel 1: Schumacher erneut vorne . . . . . . . 213
Tagesschau . . 110/112
Wetter. . . . . . . . . . . 170
Kultur. . . . . . . . . 500
Gesellschaft . . . 530
INFO
END
Menu
cording Settings
Newsflash Reveal Re
...
Personal text pages
Here you will find functions such as
•
•
•
“Newsflash”, this is an on-screen display of the latest messages (e.g.
page 111).
“Reveal” concealed information, e.g. VPS pages in the station preview
pages.
Programme wizard for recording via teletext.
Depending on the provider’s respective offer, you can use the 6534
buttons and the OK button, the coloured keys, the END/TEXT button and
sometimes even the numeric buttons.
If you want to close the digital teletext, just select a different station using the
P+/P– buttons or follow the menu prompts on the screen.
In the settings, you will find menus to define the station preview pages, subtitle
pages and personal text pages, and menus to set the character set selection as
well as HiText graphics.
Note:
• Digital teletext is not available when DVB-subtitles are being displayed.
• If a timer recording is programmed at the TV-set, at the start time of the
recording the digital teletext mode is switched off automatically.
ꢀ7 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating modes – Radio
Radio menu
Radio
MENU
Call radio menu
You can only receive radio stations via DVB. If you do not have any DVB radio
reception, you can play a sound signal from an external device using the TV set
via the sound/AV inputs.
INFO
END
Radio menu
Sound
Treble
Stations
...
Timer functions
RADIO
Use the RADIO button on the remote control to switch the
In the radio menu, as in TV mode, you can set the sound, search for radio
radio on or off.
stations and store them (automatically or manually – not with DVB-T mode in
GB), delete stations from the list, rearrange them or change names and set the
switching off and alarm functions.
Radio:
8
DLF
Numerical
9
HR-INFO
S
S
S
S
S
S
S
S
S
AUDIO IN
AVS
10 MDR INFO
11 MDR FIGA
12 NDR KULT
13 SWR1
AV2
AV1
1
2
3
4
5
6
7
8
B5 AKTL
BAYERN 1
BR4 KLSK
S
S
S
S
S
S
S
S
EPG - Programme guide
14 SWR2
15 WDR3
16 WDR5
SUNSHINE
ROCK ANT
ANTENNE
DLR
For the DVB radio stations, you can also use the programme guide if the station
currently active supplies data.
17 OESTER 1
18 MDR JUMP
19 JAZZ RAD
20 BLUSAT20
S
S
S
OK
DLF
EPG
Call Programme guide
18:00 - 18:10 Nachrichten
OK
END
Switch to ...
Scan stations
0
9
Select station
Screen off/on
Previous station
Change sorting
...
MENU
EPG
You can see a station list of the radio stations or with DVB-T in GB the station
logo. In this case you can call up the station list by using the OK or INFO key.
Station list is sorted by LCN.
You can see a station list of the radio stations. Digital DVB-T stations are
indicated by T , DVB-C stations by C and DVB-S stations by S . Encrypted
stations are additionally indicated by . Ask your specialist dealer about
decoders or the use of a CA module and a Smart Card for the reception of
encrypted stations.
When time and title are sent by the marked station these data are displayed at
the bottom of the station list.
When the station list is shown you can switch off the screen with the red
coloured key. The LED indicator on the set changes from green to orange.
You can switch the screen display back on by using the OK key, red or blue
coloured keys, by using RADIO, MENU or END on the remote control.
Station switching with dark screen: by using – or + on the TV set or by using the
remote control P– and P+ or by using the numeric buttons (for DVB-T operation
in GB, the buttons may be configured differently by the provider).
The sound menu can be called in the radio mode using the
button.
- ꢀ8
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating additional equipment
Search for and store the station of the video recorder (if no Euro-AV
cable is available)
Login and connect equipment
Switch on the test station on the VCR or insert a recorded tape and start play-
back. In some video recorders the station must be switched on by activating the
modulator.
You have logged in and connected all connected equipment in the initial instal-
lation. If you want to connect other equipment or disconnect equipment, call
the connection wizard.
MENU
Call up the TV menu
Then call the AV selection on the TV set with 0 AV. Select the menu item
“VIDEO” in the AV selection and call using OK.
To prevent “normal” TV stations being found in the search, pull out the antenna
plug from the antenna input of the VCR temporarily (the cable to the antenna
system).
OK
Select “Connections”
OK
Select the submenu line
If you cannot see the test station or playback from the cassette, the VCR is
transmitting on a different channel. You then have to search for the station or
set it manually.
OK
Select “New devices/modifications” and ...
OK
Call with OK.
1. Call the TV menu with the MENU button.
ꢀ. Select the “Settings” menu item with 34.
State what equipment you want to connect. State whether a piece of audio
equipment is to be connected (more details as of page 31). The connection wiz-
ard then shows you which sockets you should connect this equipment to. Then
connect the equipment to these sockets according to the connection diagram.
3. Select the line below using 6and use 34to select “Stations”.
4. Select the line below using 6and select “Manual adjustment” using 34
and call this menu using OK.
5. Enter channel “E30“ under the “Channel“ menu item (“Antenna/cable
(analogue)”, select in this menu above if necessary).
6. Start search with the blue coloured key.
Connecting video/DVD recorders
In addition to the connection via the Euro-AV sockets, you also have to connect
the antenna (only for terrestrial antenna or cable systems) through the VCR/DVD
recorder to the TV set. The antenna signal is then available to the video/DVD
recorder and the TV set.
7. When the station has been found, change the name if needed, confirm with
OK and save with the red coloured key.
8. A list of the stored stations is displayed.
9. Select 0 (VIDEO) here and overwrite this station storage location using the
red coloured key.
Note: Use Euro-AV cables with right-angled plugs as shown.
10. Hide the menu again using the END button.
Plug the antenna plug back in.
If you now get interference because a TV station is transmitting on the same
channel as the VCR station, you have to change the transmitting station on the
VCR and search for the VCR station on the TV again.
ANT AV1
ENTREE
ANTENNE
EURO AV2
DECODER
AUDIO
AERIAL
SORTIE
G
OUT
L
SORTIE
ANTENNE
EURO AV1
AUDIO/
VIDEO
D
R
RF OUT
ꢀ9 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating additional equipment
Video playback
Timer recording with video or DVD recorder
There are several ways to see the picture and hear the sound of the VCR, DVD
player/recorder or camcorder on your TV:
You can programme timer recordings on the TV set. Programming can be done
with the EPG programme guide (not with DVB-T in GB), teletext or manually.
Call the “Timer list” menu with the
button and press the red coloured
1. You can usually use the Euro-AV sockets on the TV set and on the VCR. For
camcorders or digital cameras, use the AVS sockets on the TV set. DVD play-
ers/recorders and SetTopBoxes may have HDMI or component sockets for
video and audio transmission. In this case, use the corresponding sockets on
the TV set.
key for the “Recording wizard”. Select whether you want to programme the
recording via EPG, teletext or manually. You also have the option to programme
recordings directly from the EPG programme guide or teletext.
Note: Copy-protected programmes are not output to the Euro-AV sockets for
legal reasons.
When you have connected the Euro-AV socket to a recorder which has Digital
Link Plus or a comparable system from a different manufacturer, the timer data
of analogue terrestrial stations are transmitted from the TV to the recorder. The
recording quality SQ or EQ is transmitted for DVD recorders, in additional to
the station, date and time. The recording is then controlled by the recorder and
the recorder tuner is used for reception of the station. The recording data are
not saved in the timer list of the TV set. You will only find the timer data in the
recorder.
When playing back from a video recorder using Euro-AV socket and Digital
Link Plus (or a comparable system from another manufacturer), the picture
from the VCR is shown at the current channel location.
When playing back from another VCR, camcorder or digital camera, use
AV
the AV selection
or the station list (OK) to select the AV socket/the
device to which the VCR is connected.
Video recorders transmit a switching voltage during playback, which the
TV can evaluate (can be activated in the connection wizard or in the “TV
menu – Connections – Miscellaneous – Allow switching voltage” - set to
“yes”). Then the picture of the video recorder is shown during playback at
the current station location.
If you want to record from digital stations, the TV tuner is used and the recorder
is controlled by the TV set. Then the station is locked during the timer recording.
ꢀ. You can use the antenna connection between the VCR and the TV without a
Euro-AV socket. The sound is only transmitted in mono. Select the first menu
item, e.g. VIDEO, in the AV selection.
If you have connected a Loewe video recorder with Digital Link to the Euro-AV
socket (without Digital Link Plus) and you are using the timer programming of
the TV, the TV receiver is always used, for terrestrial stations as well. The TV
controls the recording.
You have to set the recorder to the AV input (signal source) to which the TV set
is connected.
Calling AV inputs in the AV selection:
AV
Call AV selection
Then the station on the TV set is locked during the timer recording.
Digital Link must be switched on on the recorder. Read the operating
instructions of your Loewe recorder for more information.
Use only Euro-AV cables, which are completely wired, otherwise Digital Link/
Digital Link Plus will not work.
AV selection
OK
VIDEO VCR
DVD AVS
VGA
HDMI/DVI
COMP. IN
Select AV device/socket (or VIDEO if the video recorder has
been connected only via the antenna socket) and use ...
OK
Another advantage of Digital Link is that you can install the recorder in a con-
cealed place (e.g. in a rack). You can control the recorder with the TV set.
If you have a Loewe recorder with both systems, you can use all the advantages.
The advantages of Digital Link Plus are used for the timer recording; the advan-
tages of Digital Link for concealed installation of the recorder.
OK
to call.
Now you will see the playback from the connected AV device.
Calling AV input via the station list
Call the station list with the OK button in TV mode.
In the numeric and alphabetical sorting, you will always find the AV sockets at
the top of the list.
- 30
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating additional equipment
Audio output “AUDIO DIGITAL OUT“
Assignment of digital audio inputs and
outputs
The digital audio signal is applied at the “AUDIO DIGITAL OUT” socket of the TV.
For example, you can connect an external digital audio amplifier or the Loewe
Auro system here.
Audio input “AUDIO DIGITAL IN”
An analogue audio signal from the TV set or another sound source which is
received at one of the Euro-AV sockets of the TV set is converted into a digital
signal (PCM) and output at the “AUDIO DIGITAL OUT“ socket. Conversion from
external analogue AV sources to PCM is not possible if the TV’s loudspeakers are
used as a centre channel. In this case, connect your audio amplifier additionally
to the TV (AUDIO OUT L/R) with a cinch cable and switch the audio amplifier to
analogue audio input.
The TV set has a coaxial digital audio input “AUDIO DIGITAL IN” and a coaxial
digital audio output “AUDIO DIGITAL OUT”. If you are using an external digital
surround amplifier for sound reproduction, you have to feed digital audio
signals to the TV, e.g. from the DVD player.
The digital TV sound or the digital sound of a connected auxiliary device is only
audible via an external digital audio amplifier (e.g. Loewe Auro system).
AUDIO
DIGITAL
AV2
IN OUT
Surround Amplifier
DVD
MULTICHANNEL AUDIO OUT
I
PREOUT
LEFT CENTER
REAR
LEFT
FRONT
AUX-
I/O
AUX1 INAUX OUT AU
2
FL
SL
C
FR
L
L
DIGITAL AUDIO OUT
PCM/MPEG2/AC3/DTS
STEREO OUT
VIDEO OUT
DIGITAL
IN
MAINS
II
DIGITAL
OUT
TO TV-I/O
SUB
SR
R
R
RIGHT SUBW. RIGHT
REAR FRONT
R
L
(CVBS)
VIDEO OUT
S-VID(EYO/C)
DIG OUT
OUT
OPT OUT
AUDIO
Connect the output socket of the DVD player (DIG OUT) to the TV‘s “AUDIO
DIGITAL IN” socket with a cinch cable.
In the connection wizard, specify that audio transmission is to be digital. Specify
that the digital sound is to be assigned for example to the Euro-AV socket ꢀ to
feed the digital sound to the digital audio output of the TV set and via this to
the external audio amplifier. Further information about this can be found on
page 33.
31 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating additional equipment
Connect the digital audio output of the TV set “AUDIO DIGITAL OUT” to the
“DIGITAL IN” input of the Preceiver using a cinch cable. Connect the TV socket
“SERVICE“ to the TV-L-Link socket on the Preceiver using the L-Link cable (pro-
vided with the Preceiver). Switch on the TV set and the Preceiver. Via the L-Link,
the TV recognises whether the Preceiver is connected.
Connecting Loewe DVD Preceiver Auro
2216 PS and Individual Sound loudspeaker
system
You can play audio signals from the TV or DVD player in cinema quality with these
components. In addition to the subwoofer illustrated below the Individual Sound
system includes up to 5 loudspeakers for the front, center and surround reproduc-
tion. The centre signal can be reproduced alternatively by the TV speakers.
Connect the cubic socket on the DVD Preceiver to the “Master” cubic socket on
the subwoofer. Use the cubic plug cable enclosed with the DVD Preceiver. Plug
the white plug (without kink protection) into the cubic socket on the subwoofer.
For TV as a centre loudspeaker, connect “AUDIO IN C” on the TV set to “PRE
OUT C”on the DVD Preceiver using a cinch cable.
Select the “Tremo“ loudspeaker system in the DVD menu of the Preceiver, set
the listener/speaker distances and adjust the speaker levels. Please consult the
Preceiver manual.
If you want to listen to the sound via the TV speakers temporarily, call the Sound
menu, select “Sound via“ and then “TV“. If you want to listen to the sound via
the Loewe Auro system, select “AURO“ under “Sound via“.
Audio cable cinch -> SCART
(available in specialised trade)
only required for TV as centre loud speaker
Loewe Flat-TV
AV2-SCART
CENTER
Surround speaker system
Loewe
COMPONENT IN
DIGITAL OUT
SERVICE
Individual Sound
ON
Power OUT
Digital audio TV -> Auro
Component Video
(available in specialised trade)
R
L
Surr.
OFF
R
C
L
Front
Bass Intensity
EURO-AV cable
Min.
0
Max.
Phase
Center to
Loewe
Auro
Line IN
Sat
TV
180
Right Subw. Left
Surr.
Slave
Front
Right Center Left
Y
PREOUT
AUX1 IN AUX OUT AUX
2
System connector
Master
L
C
R
L
L
TO TV
DIGITAL
IN
Pb
230V~50/60Hz
DIGITAL
OUT
TV
EXT
Pr
SL
LFE
SR
R
R
COMPONENT
VIDEO OUT
12V
/
15mA
L-LINK
L-Link cable
Six pin Cinch
Cubic plug cable
- 3ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating additional equipment
Select “Analogue“ for “Sound transmission“ for analogue audio amplifiers.
The sound for the analogue amplifier is transmitted via the AUDIO OUT L/R con-
nections of the TV to the audio amplifier. Connect the amplifier with two cinch
cables.
Specify under “Type of amplifier“ whether the analogue amplifier is a stereo or
surround amplifier.
If it is a surround amplifier, also specify whether or not the TV speakers are to be
used as centre loudspeakers. Connect the centre output of the amplifier to the
centre output of the TV using a cinch cable, if necessary. Note: do not use the
centre loudspeaker connection on the amplifier; instead use the pre-amplifier
centre output.
Connecting other audio amplifiers or active
speakers
In the connection wizard, select “HiFi/AV amplifier” under “Equipment selec-
tion: audio component”. The connection wizard allows configuration of different
audio amplifiers (stereo amplifiers, surround amplifiers, analogue or digital) with
different sound formats (Dolby Digital, dts, MPEG and Stereo/PCM). Refer to the
operating instructions for the audio amplifier to be connected.
Select “Digital“ under “Audio transmission“ for digital audio amplifiers. Con-
nect the digital audio output of the TV AUDIO DIGITAL OUT to the digital audio
input of the digital amplifier.
Assign the digital audio input to the socket through which the corresponding
picture is transmitted (e.g. AVꢀ if a DVD player is connected there). Then the
digital sound is passed to the digital audio output of the TV set and fed to the
external audio amplifier via this.
Specify which sound formats can be decoded with your digital amplifier (Dolby
Digital, MPEG, dts).
Specify under “Type of amplifier“ whether the digital amplifier is a stereo or
surround amplifier.
AUDIO IN
AUDIO OUT
C
L
R
If it is a surround amplifier, specify whether or not the TV loudspeakers are to be
used as centre loudspeakers. Connect the centre output of the amplifier to the
centre output of the TV using a cinch cable, if necessary.
Note: do not use the centre loudspeaker connection on the amplifier; instead
use the pre-amplifier centre output.
PRET
AUX1 INAUX OUT AUX
2
FL
SL
C
FR
L
L
DIGITAL
IN
DIGITAL
OUT
SUB
SR
R
R
If you want to listen to the sound via the TV loudspeakers temporarily, call the
Sound menu using the button, select “Sound via“ and then “TV“.
When connecting active speakers, select “Active speakers” in the connection
wizard under “Audio equipment selection”. The sound for the active speakers
is transmitted via the AUDIO OUT L/R connections to the active speakers. Make
connections to the active speakers using the cinch cables.
AUDIO IN
C
OUT
AUDIO DIGITAL
Make the audio settings on the TV set when active speakers are connected.
When using an external audio amplifier, make the audio settings on the audio
amplifier.
PRT
AUX1 INAUX OUT AUX
2
FL
SL
C
FR
L
L
DIGITAL
IN
DIGITAL
OUT
SUB
SR
R
R
33 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating additional equipment
HDMI (DVI) connection
VGA/XGA connection
The HDMI connection (High Definition Multimedia Interface)
allows digital picture and sound transmission via a connecting
cable, e.g. from Loewe DVD Recorder Centros ꢀ10ꢀ/ꢀ17ꢀ HD.
The digital picture and sound data are transmitted without data
compression and therefore lose none of their quality. In the equipment con-
nected, no analogue/digital conversion is necessary, which might also have lead
to losses in quality.
You can connect a PC or a Set Top Box (STB) and therefore use
the TV screen as an output device.
Connect the PC/STB to the VGA/XGA socket on the TV using a
VGA cable.
When connecting to a PC, first set one of the following screen resolutions on
your PC.
800x600 60Hz (SVGA)
DVI signals can be also be reproduced by the HDMI connection using a
DVI/HDMI adapter cable. This is possible because HDMI is based on DVI and is
downwardly compatible. That means that the digital video signals are transmit-
ted via HDMI - no audio signals are transmitted, though. In addition, both use
the same copy protection method HDCP.
10ꢀ4x768 60Hz (XGA).
When a Set Top Box is connected, set the following screen resolutions according
to the options of the Set Top Box:
SDTV: 7ꢀ0x576i (PAL), 7ꢀ0x480i (NTSC),
7ꢀ0x576p, 7ꢀ0x480p.
HDTV: 1ꢀ80x7ꢀ0p, 19ꢀ0x1080i.
Connect the set with an HDMI connection using an HDMI cable (type A, 19-pin)
to the HDMI socket of the TV set. Log in the HDMI connection in the connec-
tion wizard (TV menu - Connections - New devices/modifications).
Select the VGA/XGA connection in the AV selection.
AV
Call AV selection
AV selection
VGA
OK
VIDEO VCR DVD
AVS
HDMI/DVI
COMP. IN
Select the HDMI connection in the AV selection.
AV
OK
Call AV selection
Select VGA socket and use ...
to call.
AV selection
VGA HDMI/DVI
OK
COMP. IN
VIDEO VCR DVD AVS
OK
OK
Select HDMI/DVI socket and use ...
to call.
Start the connected device.
OK
Set geometry
Call the TV menu using the MENU button, select “Geometry“ using 34and
set:
If the picture is not positioned correctly, you can move the picture horizontally
and vertically here so that it fills the whole screen. You can also set the phase
position so that the picture appears in the best possible quality.
Start playback on the device connected with HDMI connection.
The set automatically recognises and sets the best possible format for the video.
If transmission occurs via a DVI/HDMI adapter cable, then you can feed in the
appropriate analogue audio via the audio input sockets AUDIO IN L/R on the TV
set. The sound is reproduced via the TV speakers.
If you have connected a digital external audio amplifier, you can select the
digital audio signal in the connection wizard (TV menu - Connections - New
devices/modifications) and assign it to the HDMI/DVI socket. You can make
the other settings for the audio amplifier as described for digital amplifiers on
page 33. The digital audio signal of the DVI audio source is fed in at the AUDIO
DIGITAL IN socket on the TV. Feed the digital audio signal from the TV AUDIO
DIGITAL OUT to the external amplifier.
Setting colour standard
Call the Picture menu using the
34and make your selection.
The colour standard for a connected PC is RGB.
In Set Top Boxes, you usually set Ycc as a colour standard. Other formats such
as Ypp or RGB can also be output. Please consult the operating instructions of
the device connected.
If the wrong standard is selected, you will recognise this by the wrong colours
in the display.
button. Select “Colour standard“ using
Set geometry: as described for the VGA/XGA connection.
- 34
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating additional equipment
Sound from PC or Set Top Box
Component video connection
Feed the analogue audio signal from the PC or the STB to the sockets AUDIO IN
L/R on the TV via a cinch cable. The sound is reproduced via the TV speakers.
If you have connected a digital external audio amplifier, you can select the
digital audio signal in the connection wizard (TV menu - Connections - New
devices/modifications) and assign it to the VGA/XGA socket. You can make the
other settings for the audio amplifier as described for digital amplifiers on page
33. The digital audio signal of the Set Top Box is fed in at the AUDIO DIGITAL IN
socket on the TV. Feed the digital audio signal from the TV AUDIO DIGITAL OUT
to the amplifier.
If you have a DVD player/recorder with Component OUT connec-
tions, you can connect it to the SD/HD-COMPONENT IN sockets
of the TV instead of to the Euro-AV sockets. The connecting
cable with three cinch plugs each transmits picture information.
The playback is of a better quality than via the Euro-AV socket.
You need another cinch cable for the analogue sound transmission. Connect the
analogue audio outputs of the DVD player to the AUDIO IN L/R sockets on the
TV set. The sound is reproduced via the TV speakers.
If you want to use the digital sound of the DVD player with a digital audio
amplifier connected to the TV, make a connection between AUDIO DIG OUT of
the DVD player and AUDIO DIGITAL IN of the TV set.
Log in the component/device in the connection wizard:
Assign the AUDIO DIG IN input here to the COMP. IN socket, provided a digital
audio amplifier is also connected. You can make the other settings for the audio
amplifier as described for digital amplifiers on page 33.
Set the signal at the component input in the connection wizard: Set to “Auto-
matic“ first. If the signal is not reproduced when playback is started, consult
the operating instructions of the DVD device connected to find out what screen
resolution is possible (SDTV, HDTV or ProScan).
Select the component connection in the AV selection.
AV
Call AV selection
AV selection
COMP. IN
OK
DMI/DVI
VIDEO
VCR DVD
VGA
HDMI/DV
AVS
OK
Select COMP. IN sockets and use ...
to call.
OK
Start playback on the connected device.
Set geometry and colour standard: as described for the VGA/XGA connection.
35 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating additional equipment
When operating in the VCR or DVD mode, the indicator above the VCR or DVD
button lights up. In DVD mode, the following DVD players can be operated:
Xemix 61ꢀꢀDO, 81ꢀꢀDA and 6ꢀꢀꢀPS.
Operating Loewe video recorders and
Loewe DVD players directly
You can switch over the remote control of the TV set to operate Loewe
video recorders and Loewe DVD players. These devices can be operated
directly.
In VCR mode, the following VCRs can be operated: ViewVision 8106H, 8136H,
8176H, 6306H, 6336H, 6376H, 6396H, 4306H, 4376H, ꢀ10ꢀM, ꢀ30ꢀM, 4ꢀ06,
4ꢀ36, 4ꢀ76.
Select the device to be operated:
press the VCR button, the indicator above lights for about
5 seconds.
For other Loewe equipment than that listed, please use the original remote
control.
VCR
DVD
TV
press the DVD button, the indicator above lights for about
5 seconds.
Switch back to TV operation: Push the TV button.
Functions for Loewe video recorders (VV 8106, 8136, 8176)
Functions for Loewe DVD players (Xemix 6122DO, 8122DA, 6222PS)
Switch DVD on /
Sound off/on (mute)
Operating VCRs
off on standby
Sound off/on (mute)
Operating VCRs
Switch recorder
on/off – in standby
Operating DVD players
Select chapter
Repeat
Operating DVD players
TV
SV
VCR
T-C
DVD
TV
SV
VCR
T-C
DVD
Operating the TV set
Operating the TV set
Select picture and sound source
Select video and audio input
Display/close Timer list
Set marker
DISC-MENU
SP/LP
DISC-MENU
SP/LP
Display/close
ShowView timer Menu
Switch to Long Play
/Standard Play
Select camera position
RADIO
000
RADIO
000
Zoom
Set time display to 0:00:00
User interface of
loaded DVD on
Select Chapter;
in menu: enter digits
Select station directly
/in menu: enter digits
abc
def
abc
def
ghi
jkl
mno
ghi
jkl
mno
pqrs
EPG
tuv
AV
pqrs
EPG
tuv
AV
wxyz
PIP
wxyz
PIP
Set picture format (TV)
Call AV selection (TV)
Set picture format (TV)
Call AV selection (TV)
Status display on;
Status display on/off
DVD menu on;
in menu: back
in menu: close menu
VCR menu on
/in menu: back
in the menu: Close menu
DVD menu on,
previous function activ;
in menu: info on/off
Status display on/off
P+
Reverse play
/in menu: select/set
P–
Title/Chapter Table;
in menu: call/confirm
on playback: Slow motion forward
/in the menu: select/set
or to the next menu
OK
OK
Call up station list
/in menu: call up/confirm
/
:
Chapter up/down
in menu: select up/down
/
/
V–/V+ volume
quieter/louder
V–
V+
at stop: Program up/down
on playback: manual tracking
in the menu: Select position
V–/V+ volume quieter/louder
Search back/forward
in menu: select left/right
Next chapter
Fast forward
Rewind
Beginning of chapter or
previous chapter
/search back
/search forward
/search forwards
/search backwards
Start playback
Playback
Start recording
Pause
Stop tape
Stop
/single frame, slow motion
Pause (still frame)
/frame-by-frame advance
- 36
Download from Www.Somanuals.com. All Manuals Search And Download.
What to do, if ...
Problem
Possible cause
Remedy
The “Recording” menu point is not displayed in the No video or DVD recorder logged in.
TV menu.
Log in the video or DVD recorder in the connection
wizard and connect the device.
“Connections” cannot be called in the TV menu
(deactivated).
A time recording is in progress.
Wait until the timer recording has ended or delete the
timer.
The control of the Loewe video recorder and the
timer do not work or do not work properly.
a) The Digital Link function is not activated or not
possible in the recorder.
a) Activate Digital Link in the recorder (see operating
instructions of the video recorder).
b) Euro-AV cable is not connected.
c) Recorder is not logged in.
b) Connect the Euro-AV cable.
c) Log in recorder.
General problems with connecting external equip-
ment via an AV input.
a) The device is not logged in to the connection
wizard or is connected differently than is shown
in the connection diagram.
a) In the connection wizard (TV menu – Connec-
tions – New devices/modifications), compare the
connection diagram with the actual installation
and connect as shown, if necessary.
b) The AV norm is set incorrectly.
c) The AV signal is set incorrectly.
b) Set the norm correctly.
c) Set the AV signal correctly.
If “Automatic” is set for AV norm or AV signal, this
can lead to errors for signals which do not conform
to the norm. Then the norm and the signal are to be
set according to the specifications in the operating
instructions of the external device.
A decoder connection does not function or is faulty. a) The signal is not decoded because the wrong
a) Follow the instructions in the connection wizard
again (TV menu – Connections – New devices/
modifications) and select the corresponding
decoder station.
decoder stations are selected in the connection
wizard.
b) The sound is missing in decoder mode because
the wrong decoder sound is assigned in the con-
nection wizard.
b) Follow the instructions in the connection wizard
again and select the right audio source (decoder,
TV or autom.), see instructions of the decoder.
All menus appear in the wrong language.
Menu language has been set incorrectly.
Set your menu language:
Press the INFO button in TV mode (index). Select the
first index item and call it by using OK. Then select
the language and confirm with OK.
37 -
Download from Www.Somanuals.com. All Manuals Search And Download.
What to do, if ...
Problem
Possible cause
Remedy
Digital Link Plus does not function.
a) Euro-AV cable is not fully wired (pin 10 not
wired).
a) Replace the Euro-AV cable.
b) Some recorders can only adopt stations during
the initial installation of the TV set.
b) Restore the recorder to the as-delivered state (see
recorder’s operating instructions).
c) All or some of the terrestrial and cable stations
c) Rearrange the terrestrial and cable stations so
that they fall between 1 and 99.
are stored on station storage locations ≥ 99.
Various characters are displayed incorrectly in the
teletext.
The wrong character set is set in the teletext menu.
Set the right character set: Teletext menu - Settings
- Character set: standard or the appropriate character
set.
No sound via external digital audio amplifier.
a) The external digital audio amplifier does not sup- a) Set PCM stereo on the DVD player in the sound
port the selected sound format (Dolby Digital,
dts, MPEG).
selection. For DVB stations, switch language/
sound selection (green coloured key) to Stereo on
the TV set in the status display (END).
b) TV set and external digital audio amplifier are
b) Connect Digital-Out from the TV set to a Digital-In
of the external digital audio amplifier and select
the appropriate input to this.
not connected.
- 38
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical data
General data
Type
Concept L 26 Basic
Concept L 26
Concept L 32 Basic
Concept L 32
Item no.
65433xxx
654ꢀ1xxx
65434xxx
6544ꢀxxx
Versions TV terr. (analogue)
Versions DVB-T/C
Versions DVB-T CI (MHEG-5)
Versions DVB-T/C CI
•
–
–
–
–
–
•
•
•
–
–
–
–
•
•
–
Set dimensions without stand (ca. cm WxHxD)
Dimensions with stand (ca. cm WxHxD)
81,0x41,0x10,0
81,0x47,5xꢀ3,ꢀ
81,0x41,0x10,0
81,0x47,5xꢀ3,ꢀ
97,0x48,0x10,9
97,0x54,5xꢀ3,ꢀ
97,0x48,0x10,9
97,0x54,5xꢀ3,ꢀ
Set weight without stand (ca. kg)
Set weight with stand (ca. kg)
11,8
13,8
11,8
13,8
14,7
16,7
14,7
16,7
Display
HD-LCD technology
66/16:9
1366x768
1ꢀ00:1
HD-LCD technology
66/16:9
1366x768
1ꢀ00:1
HD-LCD technology
80/16:9
1366x768
1ꢀ00:1
HD-LCD technology
80/16:9
1366x768
1ꢀ00:1
Picture diagonal (cm)/picture format
Resolution
Contrast ratio
Angle of viewing horizontally/vertically
176°
176°
178°
178°
Power consumption (IEC 6ꢀ087)
in operation (watt)
65
70
80
85
in standby (watt)
< 3
< 3
< 3
< 3
Ambient temperature (Celsius)
Relative humidity (not condensing)
Barometric pressure
5º – 35º
ꢀ0 – 80%
800 – 1114 hPa (0 – ꢀ000 m over NN)
39 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical data
Connections
Electrical data
Jack 3.5mm
Mini-DIN (AVS) Video IN
Headphones 3ꢀ- ꢀ000 ohm
Chassis name
Power supply
Tuner
Hyperband 8 MHz
Station storage locations
TV standards
L ꢀ650
ꢀꢀ0 V -ꢀ40V/50- 60 Hz
VHF/UHF/ cable
Y/C (S-VHS/Hi 8)
CVBS (VHS/8 mm)
CVBS (VHS/8 mm)
Cinch (yellow) Video IN
Cinch (white/red) Audio IN
IEC socket 75 Ohm/5 V/80 mA
F socket 75 Ohm 13/18 V/350 mA (1
EURO-AV 1 Video IN
41 MHz to 860 MHz
430 / for DVB 1680
B/G, I, L, D/K, M, N
DVB-T, DVB-C, DVB-S
SECAM, PAL, NTSC,
NTSC-V, PAL-V (60Hz)
Mono/Stereo/Dual-channel
Nicam B/G, I, L,
L/R
Antenna/cable/analogue PIP (1 /DVB-T/C
ANT-SAT
Y/C (S-VHS/Hi 8)
CVBS (VHS/8 mm)
CVBS (VHS/8 mm)
Colour standard
Sound standard
Video OUT
Y/C (S-VHS/Hi 8)
Audio IN
Audio OUT
EURO-AV ꢀ Video IN
L/R
L/R
Virtual Dolby
ꢀ x ꢀ0 watt
TOP/FLOF Level ꢀ.5
1500
Rated audio power
Analogue Teletext
Page Memory (Concept L ꢀ6 / L 3ꢀ)
Page Memory (Concept L ꢀ6 Basic / L 3ꢀ Basic)
Digital Teletext (only for MHEG-5 device versions)
Y/C (S-VHS/Hi 8)
CVBS (VHS/8 mm)
RGB, YUV
1000
MHEG-5
Video OUT
CVBS
Y/C, (only with SVHS Link Plus)
Audio IN
Audio OUT
L/R
L/R
Cinch
ꢀ x Cinch Audio IN
ꢀ x Cinch Audio OUT (level adjustable in active loud speakers)
Audio IN max. ꢀVrms
Centre
L/R
L/R
Cb/Pb signal
Cr/Pr signal
Y signal
Digital audio
Cinch
Cinch
Cinch
Cinch
Cinch
COMPONENT IN:
COMPONENT IN:
COMPONENT IN:
Digital Audio IN (SPDIF)
Digital Audio OUT (SPDIF)
Digital audio
HDMI/DVI Digital Video/Audio IN type A 19pin
VGA/XGA VGA/XGA IN
Mini-DIN SERVICE
Digital video and audio
PC/STB video signal
Service/L-Link
(1 Set-specific equipment and retrofitting options for CI-Slot, PIP and satellite
tuners, see pages 41 and 4ꢀ.
Printed in Germany
TB/06/08/7.0
Subject to modifcations!
© by Loewe Opta ꢀ006
Dolby and the double ´D´ symbol are
trademarks of Dolby Laboratories
- 40
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories
Wall holders and stands
Loewe DVD players and recorders
Refer to the notes on the installations options on page 6.
The DVD players and recorders from Loewe are characterised by form and
colour, which match Loewe TV sets, adapted user guidance and technology. A
combination of the two devices forms a system which offers many advantages.
PIP tuner
The PIP tuner enables picture in picture displays (PIP) for analogue terrestrial
and cable reception.
You can retrofit either this PIP tuner or a digital satellite tuner.
The PIP function is possible for both retrofit versions.
You can find the retrofitting options for your set in the table on the next page.
Loewe audio system Auro and the active speaker system
Individual Sound
The interplay of a Loewe TV with a Loewe audio system and a Loewe speaker
system creates an excellently coordinated home cinema system. Advantages are
high operating comfort, attractive design and adapted technology.
Loewe order no. 8944ꢀ.080
Digital Satellite tuner
You can have your TV set retrofitted with the digital satellite tuner. By using this
tuner, you can receive DVB-S stations.
The digital satellite tuner is completely integrated in the TV set (physically and
logically) and is operated by the remote control/menu control of the TV.
When you retrofit your TV set with the digital satellite tuner, your TV set auto-
matically has the PIP function.
You can retrofit either this digital satellite tuner or a PIP tuner.
You can find the retrofitting options for your set in the table on the next page.
Loewe order no. 89361.056
Common Interface (CI-Slot)
The common interface (slot for CA-module) enables you to also receive en-
crypted stations.
You can purchase the CA-module and Smart Card at your specialist dealer.
You can find the retrofitting options for your set in the table on the next page.
Loewe order no. 89346.080
Subject to delivery options.
41 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories
Retrofitting options
The following table shows the equipment and retrofitting options for the individual device versions.
Device version / Equipment
Item no.
PIP tuner(1
Digital
Single SAT-Tuner(2
Common
Interface (CI-slot)
Concept L ꢀ6 Basic
65433xxx
–
–
–
–
–
○
–
–
○
–
–
○
–
●
●
–
Concept L ꢀ6 DVB-T CI
Concept L ꢀ6 DVB-T/C CI
Concept L 3ꢀ Basic
654ꢀ1xxx (MHEG-5)
654ꢀ1xxx
65434xxx
Concept L 3ꢀ DVB-T CI
Concept L 3ꢀ DVB-T/C
6544ꢀxxx (MHEG-5)
6644ꢀxxx
●
○
● available / installed
○ retrofittable / optionally available
–
retrofitting not possible
(1 You can retrofit either this PIP tuner or a digital satellite tuner.
(ꢀ You can retrofit either this digital satellite tuner or a PIP tuner.
- 4ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Service
Loewe Austria GmbH
Parkring 10
1010 Wien, Österreich
Tel.: +43 - 810/0810-ꢀ4 (zum Ortstarif)
E-Mail [email protected]
Kjaerulff 1 A/S
Loewe Italiana SRL
Largo del Perlar, 1ꢀ
37135 Verona (VR), Italia
Tel. +39 - 045 8ꢀ 51 619
Fax +39 - 045 8ꢀ 51 6ꢀꢀ
Email [email protected]
DSV TRADING SA
Plac Kaszubski 8
81-350 Gdynia, Polska
Tel. +48 - 58 - 6 61 ꢀ8 00
Fax +48 - 58 - 6 61 44 70
Email [email protected]
C.F. Tietgens Boulevard 19
5ꢀꢀ0 Odense SØ, Denmark
Tel. +45 - 66 13 54 80
Fax +45 - 66 13 54 10
Email [email protected]
International Dynamics
Australasia Pty Ltd.
1ꢀ9 Palmer Street
Richmond 31ꢀ1, Victoria, Australia
Tel. +61 - 3 - 94 ꢀ9 08 ꢀꢀ
Fax +61 - 3 - 94 ꢀ9 08 33
Email [email protected]
Gaplasa S.A.
PL Trading (pz ꢀ004) Ltd.
ꢀ7, Aliat Hanoar St.
Givataiim 53401, Israel
Tel. +97ꢀ - 3 - 57 ꢀ7 155
Fax +97ꢀ - 3 - 57 ꢀ7 150
Email [email protected]
Service Center Loewe
Conde de Torroja, ꢀ5
ꢀ80ꢀꢀ Madrid, España
Tel. +34 - 917 48 ꢀ9 60
Fax +34 - 913 ꢀ9 16 75
Email [email protected]
ul. Verkhnaya Maslovka, d. ꢀ9
1ꢀ5083 Moscow, Россия
Tel. +7 - 495 61ꢀ 50 43
Fax +7 - 495 61ꢀ 47 10
Email [email protected]
Kjaerulff 1 AB
Loewe Opta Benelux NV/SA
Uilenbaan 84
ꢀ160 Antwerpen, België
Tel. +3ꢀ - 3 - ꢀ 70 99 30
Fax +3ꢀ - 3 - ꢀ 71 01 08
Email [email protected]
Loewe Opta France S.A.
13 rue du Dépôt,
Parc del l‘Europe, BP 10010
67014 Strasbourg Cédex, France
Tel. +33 - 3- 88 79 7ꢀ 50
Fax +33 - 3- 88 79 7ꢀ 59
Email [email protected]
Mirage Holdings Ltd
Flamingo Complex, Cannon Road
Qormi, Malta
Tel. +356 - ꢀꢀ - 79 40 00
Fax +356 - ꢀ1 - 44 59 83
Email [email protected]
Ridbanegatan 4, Box 9076
ꢀ1377 Malmö, Sverige
Tel. +46 - 4 06 79 74 00
Fax +46 - 4 06 79 74 01
Email [email protected]
BaSys Czech & Slovak s.r.o.
Stará Vajnorská 17/A
831 04 Bratislava, Slovakia
Tel.: + 4ꢀ1 ꢀ 49 10 66 18
Fax: + 4ꢀ1 ꢀ 49 10 66 33
Email: [email protected]
Telion AG
Rütistrasse ꢀ6
895ꢀ Schlieren, Schweiz
Tel. +41 - 44 73ꢀ 15 11
Fax +41 - 44 73ꢀ 15 0ꢀ
Email [email protected]
SOMARA S.A.
Kjaerulff 1 OY
Artturinkatu ꢀ
ꢀ0ꢀ00 Turku, Finland
Tel. +358 - ꢀ ꢀ84 1600
Fax +358 - ꢀ ꢀ84 1601
Email [email protected]
377, Rue Mustapha El Maani
ꢀ0000 Casablanca, Morocco
Tel. +ꢀ1ꢀ - ꢀꢀ ꢀꢀ 03 08
Fax +ꢀ1ꢀ - ꢀꢀ ꢀ6 00 06
Email [email protected]
Jadran Trgovsko Podjetje
Partizanska cesta 69
6ꢀ10 Sezana, Slovenija
Tel. +386 - 57 31 04 40
Fax +386 - 57 31 04 4ꢀ
Email [email protected]
HADJIKYRIAKOS & SONS LTD.
Prodromou 1ꢀ1, P.O Box ꢀ1587
1511 Nicosia, Cyprus
Tel. +357 - ꢀꢀ 87 ꢀ1 11
Fax +357 - ꢀꢀ 66 33 91
CableCom AS
Gneisveien 1ꢀ
3ꢀꢀ1 Sandefjord, Norge
Tel. +47 - 33 48 33 48
Fax +47 - 33 44 60 44
Email [email protected]
LinnSight Ltd.
PO Box 8465
KA 7 ꢀYF Prestwick, UK
Tel. +44 - 1ꢀ 9ꢀ - 47 15 57
Fax +44 - 1ꢀ 9ꢀ - 47 15 54
Email [email protected]
Email [email protected]
Enkay Elektronik Servis Müdürlügü
Alemdag Cad: Site Yolu No.: 10
Ümraniye/ Istanbul, Türkiye
Tel. +90 - ꢀ16 634 44 44
Fax +90 - ꢀ16 634 39 88
Email [email protected]
Ing. Ivo Tietz
Dolní nám. 9
746 01 Opava, Česko
Tel.: +4ꢀ0 553 6ꢀ4 944
Fax: +4ꢀ0 553 6ꢀ3 147
E-mail [email protected]
International Dynamics (NZ) Pty Ltd
PO Box 109 317, Newmarket
Auckland, New Zealand
Tel.: +64 9 379 0179
Fax: +64 9 379 0ꢀ79
E-mail: enquiries@internationaldynamics.
co.nz
SIBA Engineering S.A.
6, Kifisou Av.,
1ꢀꢀ 4ꢀ Aegaleo, Hellas
Tel. +30 - ꢀ10 - 5913793
Fax +30 - ꢀ10 - 5317755
Email [email protected]
Videonix (Pty) Ltd
Loewe Opta GmbH,
P.O. Box 3195ꢀ, Kyalami 1684
Republic of South Africa
Tel. +ꢀ7 - 1 14 66 47 00
Fax +ꢀ7 - 1 14 66 4ꢀ 85
Email [email protected]
Customer Care Center
Industriestraße 11
96317 Kronach, Deutschland
Tel. +49 1801–ꢀꢀꢀ56393
Fax +49 9ꢀ61–99500
Email [email protected]
Basys Magyarorszagi KFT
Epitok utja ꢀ–4
ꢀ040 Budaörs, Magyar
Tel. +36 - ꢀ3 41 56 37 (1ꢀ1)
Fax +36 - ꢀ3 41 51 8ꢀ
Email [email protected]
Videoacústica
Comercio e Representacoes de
Equipamentos Electronicos S.A.
Estrada Circunvalacao,
Quinta do Paizinho, Arm. 5
ꢀ795-63ꢀ Carnaxide, Portugal
Tel. +351 - ꢀ 14 ꢀ4 17 70
Fax +351 - ꢀ 14 18 80 93
Email offi[email protected]
© by Loewe Opta 06050ꢀ
43
Download from Www.Somanuals.com. All Manuals Search And Download.
- 44
Download from Www.Somanuals.com. All Manuals Search And Download.
|