Operating Instructions
TV
■ Xelos A 42
■ Xelos A 37
■ Xelos A 32
■ Xelos A 26
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control - TV functions
Sound off/on
Switch on/off
- on standby
Switch over
to operate VCR
Switch over
to opertae TV set
Switch over
to operate DVD player
TV
SV
VCR
T-C
DVD
Picture menu on/off
Sound menu on/off
Call timer list
DISC-MENU
SP/LP
Standard parameters for picture/sound
(2
/menu “Other functions” (3
RADIO
000
Radio on/off
Set picture format
Select station directly
/in the menu: enter numbers
or letters
abc
def
mno
ghi
jkl
Call AV selection
pqrs
EPG
tuv
AV
wxyz
PIP
PIP on/off (picture in picture)
Electronic Programme Guide
Now&Next Programme info (3
Status display on/off (3
Show/hide menu
Analogue Teletext on/off (3
/in the menu: hide menu
E
N
D
Open index
/in the menu: info texts on/off
P+/P– Select station up/down
I
N
T
X
F
E
O
T
P+
P
–
+
P
for PIP: Position of the PIP picture
/ in the menu: select/set
V–/V+ Volume down/up
V–
V+
OK
OK
V
+
–
Station list on
/in the menu: confirm/call
V
Red button:(3
P–
freeze picture on/off (1
Blue button:(3 programme info
off/on
Yellow button:(3 previous station
Green button:(3
menu "Other functions"
on/off
Select station down (1
/ in the Wizard: back
Select station up (1
Freeze picture off (1
Direct recording (1
Freeze picture on/off (1
Freeze picture on (1
(2 Radio only for DVB reception
if broadcast by the station.
(3 with DVB-T stations in UK
different function The coloured
keys do not work as described
with DVB-T stations in UK,
but they operate as described
on page 30 (Digital Teletext).
(1 when equipped with
Digital Recorder +, these
buttons have different functions,
see operating instructions
of the Digital Recorder.
Alternative
remote control
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Control units Xelos A 26 and Xelos A 42
Call the menu,
in the menu: up5
Display:
red = standby
green = operation
orange = operation without screen display
(radio mode, EPG data capture
or timer recording)
Station up,
in the menu: right4
Station down,
in the menu: left3
Switch TV set on/off
to standby
Radio on/off (1 (back to TV mode),
(1
switching on the radio
from standby,
Radio only for DVB reception, provided the station
broadcasts this. Otherwise, switch over to an
audio input.
in the menu: down6
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Control units Xelos A 32 and Xelos A 37
Display:
red: standby
green: operation
green and red:
timer recording,
EPG data capture
or radio mode
Common Interface (1
Headphones connection
S-VHS connection (AVS)
(i.e. for camcorders)
Video input (AVS)
Audio input right
Audio input left
Call the menu,
in the menu: up/down56
–
Station down,
in the menu: left3
+
Station up,
in the menu: right4
(1
Only for sets with DVB-T/C CI or can be retrofitted for sets with DVB-T/C.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections to rear panel – Xelos A 26
Common interface
Headphone connection
S-VHS connection (AVS)
(i.e. for camcorders)
Video input (AVS)
Audio input right
Audio input left
Mains
switch
Antenna/cable/analogue/digital
Center audio input (analogue)
Audio input left/right (analogue)
Audio output left/right (analogue)
Socket for
power cable
Service socket
VGA/XGA input
Satellite connection socket (1
HDMI (DVI) input
Euro-AV-
socket1
Euro-AV-
socket2
Digital audio output
Digital audio input
Component video inputs (Cb/Pb–Cr/Pr–Y)
(1
Digital satellite tuner can be retrofitted
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections to rear panel – Xelos A 32/37
Mains switch
Center Audio input (analogue)
Antenna/cable PIP tuner (1
or satellite antenna
(Sat tuner 1) (2
Audio input left/right (analogue)
Audio output left/right (analogue)
Satellite antenna
(Sat tuner 2) (3
Component
video inputs
(Cb/Pb–Cr/Pr–Y)
Antenna/cable
analogue/digital
(tuner 1)
Euro-AV-
socket 1
Euro-AV-
socket 2
Socket for power
cable
Service socket
VGA/XGA input
HDMI (DVI) input
Digital audio output
Digital audio input
Antenna output PIP tuner (1
connect to tuner 1
(1
(2
(3
Can be retrofitted. This is already integrated in sets with a digital recorder.
Digital satellite tuner can be retrofitted.
Can be retrofitted for sets with a digital recorder.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections to rear panel – Xelos A 42
Common
interface
Audio input left
Audio input right
Video input (AVS)
S-VHS input (AVS)
(i.e. for camcorders)
Headphone connection
Mains switch
AUDIO IN
L
SD/HD-COMPONENT IN
AUDIO OUT
89352.001
5
ANT-SAT
V /350 mA
C
R
L
R
SERVICE
13/18
ANT-TV
/80 mA
HDTV IN
AUDIO DIGI TAL
AV
1
AV
RGB
2
YUV
(
)
(
)
C
b
/
P
b
C
r
/
P
r
Y
IN
OUT
HDMI DVI
VGA/XGA
V
/
Power cable
Center Audio input (analogue)
Audio input left/right (analogue)
Antenna/cable PIP tuner (1
or satellite antenna
Satellite antenna
(Sat tuner 2) (3
Audio output left/right (analogue)
(Sat tuner 1) (2
Euro-AV-
socket 1
Euro-AV-
socket 2
Antenna/cable
analogue/digital
(tuner 1)
Service socket
VGA/XGA input
HDMI (DVI) input
Antenna output PIP tuner (1
connect to tuner 1
Digital audio output
Digital audio input
Component video inputs (Cb/Pb–Cr/Pr–Y)
(1
(2
(3
Can be retrofitted. This is already integrated in sets with a digital recorder.
Digital satellite tuner can be retrofitted.
Can be retrofitted for sets with a digital recorder.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
Thank you!
Transporting
At Loewe, we combine the highest standards of technology, design and
user friendliness. This applies equally for TV, video and accessories.
Your new TV set is ideally equipped for the TV standard of the future -
”HDTV” (High Definition Television). With its high-resolution screen and
the future-proof digital interfaces HDMI, you have the option to view HD
content with excellent picture quality. It therefore carries the European
quality mark “HD ready”.
Only transport the unit in an upright position. Hold the set by the top and
bottom edges of the housing. The plasma/LCD screen is made of glass
and/or plastic and may break if not handled carefully. Should the LCD
screen become damaged or should the liquid crystal begin to leak, then
it is imperative you wear rubber gloves when removing the set. Should
the liquid come in contact with your skin, thoroughly rinse with water
immediately.
Digital TV is steadily spreading via terrestrial reception, in the cable network
and via satellite. Loewe supplies sets equipped with DVB-T and DVB-C
(DVB-C not for UK). A digital satellite tuner (DVB-S) can be retrofitted. The
DVB integrated within the TV set is operated via the TV set menus using the
remote control.
We have designed this TV set so that it is easy to operate by using menus.
Information about settings in menus is shown automatically; this enables
you to understand the context quickly.
You will find the answers to many of your technical queries in the index of
your TV. If you want to operate the TV, you can access functions directly
from the index. This saves you from having to read through detailed
operating instructions and is the reason why this operating manual only
explains the most important operating steps.
Installation options
As a desktop unit
Use the stand included in delivery. There are assembly instructions included
with the stand. First read these assembly instructions and then set up your
set.
As a wall-mounted unit
Use the wall holder WM52 for Xelos A 26, Loewe order no. 63493A00.
Use the wall holder WM53 for Xelos A 32/37, Loewe order no. 63493A10.
Use the wall holder WM61 for Xelos A 42, Loewe order no. 64495L00.
As unit mounted on a rack for Xelos A 32/37
Use the Xelos Rack, Loewe order no. 64496.A00.
Or use the Flat-TV F-Stand 3, Loewe order no. 64498.A00.
TV equipment
As a rotating, free-standing unit mounted on a rack for Xelos A 32/37/42
Use the Xelos 42 Rack, Loewe order no. 64496.A01.
The maximum equipment is described in these operating instructions
(without optional retrofit kits). Functions indicated by ✳ are not available in
all TV sets. Menu contents may differ from the ones shown, depending on
how your TV is equipped.
Note on the LCD screen
The TV set with an LCD screen you have purchased meets the highest
quality requirements and has been tested for pixel errors. Despite the
utmost caution in production of the displays, it cannot be totally ruled
out that some of the pixels might be defective for technological reasons.
Please understand that such effects cannot be considered a unit defect as
defined by the warranty as long as they are within the limits specified by
the standard.
You can display how your set is equipped in the “Integrated features“
index (press the INFO button in the TV mode if no menu is displayed; the
“Integrated features“ menu item is also displayed in the index before the
initial letter A).
There are separate operating instructions for Digital Recorder Plus with the
additional DVB satellite tuner.
Scope of delivery
• LCD-TFT TV or Plasma TV set
• RC4 remote control with 2 batteries
• Table stand
• Marketing and service card
• Fabric hose for Xelos A32/37/42
• 3 cable loops for Xelos A42
• These operating instructions
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
Note on the plasma screen (Xelos A 42)
The TV set with plasma screen you have purchased meets the highest
quality requirements and has been tested for pixel errors. Despite the
utmost caution in production of the displays, it cannot be totally ruled out
that some of the pixels might be defective for technological reasons. Please
understand that such effects cannot be considered a unit defect as defined
by the warranty as long as they are within the limits specified.
For plasma screens, the emission of light decreases the longer the unit is
used.
Plasma screens work by using phosphor. In certain operating conditions,
this technology may facilitate image burns. These operating conditions
include:
• Lengthy, continuous display of a freeze frame (>10 minutes).
• Constant display of the same background.
Disposal
Packing and box
You have chosen a long lasting technical product of very high quality. We
have paid a fee to authorised recyclers who will collect the packing from
your dealer for disposal, pursuant to domestic regulations. Nevertheless,
we recommend you to keep the original box and packing material for
optimum protection if you have to transport the set.
The set
Attention: The EU directive 2002/96/EC regulates the
proper way to recycle, handle and utilise used electronic
devices. Hence, all used electronic devices are to be
disposed of separately. Please do not dispose of this set
in the normal household rubbish.
You may return your used set free of charge at
designated recycling centres or at your specialist
dealer whenever you purchase a new, comparable set. You can find out
more about recycling (also for countries outside the EU) from your local
government.
• Use of a format that does not entirely fill the screen (such as 4:3) for a
longer period of time.
Once an image is burnt into the display, it is usually not possible to remedy
the problem; this situation is neither covered by the warranty nor by the
guarantee. To avoid or reduce image burns on your screen, please follow
these instructions and recommendations:
• During the first 100 hours of operation, you should display moving
pictures for the most part or freeze frames that change frequently; these
images are to fill the entire screen.
• Use your screen in a full screen format (16:9).
• If you use the screen as a PC monitor, always activate the screen saver.
• Always switch off the TV set when not in use.
• Reduce contrast and brightness as much as possible.
The “DRM” function (Digital Refresh Mode), which can be called in this set,
may be able to eliminate or reduce minor visible effects.
Any effects resulting from an excessively long display of a freeze frame
cannot be reversed using the “DRM” function.
Cleaning
Use only a soft, clean, damp cloth to clean the TV set, the screen and
remote control (do not use any caustic or abrasive cleaning agents).
10
Download from Www.Somanuals.com. All Manuals Search And Download.
For your safety
For your safety and to avoid unnecessary damage to your TV set, please
read and observe the following safety instructions:
Position the set so that it is not exposed to direct sunlight and additional
heating from radiators.
• Prevent any metal parts, needles, paper clips, liquids, wax or the like
from getting into the TV set through the air venting slits in the rear
panel. This can lead to short-circuits and possibly to fire. If something
should get into the inside of the TV set, pull out the plug immediately
and notify customer service.
• This TV set is designed exclusively for reception and reproduction of
video and audio signals.
• This equipment is designed for domestic and
office environments and must not be used in
rooms with high humidity
• Never remove the back of the TV set yourself. Repair and servicing of
your TV set should only be carried out by authorised TV technicians.
(e.g. bathroom, sauna) or
high concentrations of dust
(e.g. workshops). If the
equipment is used in the
open air, ensure that it is
protected against moisture
(rain, drips, splashes,
sprayed water or dew). Do
not place any containers
filled with liquids or lit
candles on top of the TV.
• Place the TV set on a level, firm base. The set should not protrude at the
front when installing in cabinets or shelves.
Only use original accessories if possible, e.g. Loewe wall holders and
stands.
Never let children handle the TV unattended.
Do not allow children to play in the immediate vicinity of the TV, they
could knock, shift or pull it over and injure someone.
Never leave the TV on unsupervised.
.
• Do not install the TV where there may be vibrations. Vibrations can lead
to material stress.
High levels of moisture and
• Pull out the power and antenna cables during thunderstorms. Surge
voltages caused by lightning strikes can damage the TV through the
antenna system and the mains. Also remove the antenna and mains
plugs in long periods of absence.
concentrations of dust cause leakage currents in the equipment, which
can lead to danger of electric shock or fire.
The manufacturer‘s warranty is only valid for use in the specified
permissible environment.
• The mains plug of the TV set must be easily accessible so that the set
can be disconnected at any time.
• If you have moved the TV set out of the cold into a warm environment,
leave it standing for about an hour since condensation may form.
• Lay the mains cable in such a way that it will not be damaged. The
power cable may not be kinked or laid over sharp edges, not stood on
and not exposed to chemicals, the latter also applies to the device as
a whole. A mains cable with damaged insulation can lead to electric
shocks and is a fire risk.
• This equipment must
only be connected to
10 cm
a mains power supply
which has the same
voltage and frequency
as that specified on the
rating plate; use the
power cable provided.
Incorrect voltages
can damage the
10 cm
10 cm
• When removing the mains plug, pull the plug housing and not the
cable. The wires in the plug could be damaged and cause a short circuit
the next time it is plugged in.
.
equipment.
• Like all electronic
equipment, your TV
needs air for cooling. Obstruction of the air circulation can cause fires.
Therefore the air vents on the back must always be kept free. Please do
not place newspapers or cloths on/over the TV. If the TV is placed in a
cabinet or on a shelf, leave at least 10 cm at the sides and 10 cm at the
top to ensure sufficient air circulation.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
First installation
Remote control
Batteries
Connection
Power mains
To insert or change the batteries, press on the arrow. Slide the battery
compartment cover downwards and remove it. Insert LR 03 alkaline-
manganese batteries (AAA) and ensure that the + and - ends are positioned
correctly.
Remove the cover for the connections.
Connect the TV set to a 220-240V/50- 60 hertz power outlet. For Xelos A
26/32/37, plug the small plug of the mains cable into the mains socket on
the rear of the TV set; plug the large mains plug into a mains socket.
Antennas
+
Plug the antenna plug of your antenna/cable system or the room antenna
for DVB-T into the ANT-TV socket (Tuner 1 for Xelos A 32/37/42).
+
220-240V~
ANT-SAT 50/60Hz
ANT-TV
Then push the cover back on from the bottom.
Note on disposing batteries:
The batteries provided contain no harmful materials such
as cadmium, lead or mercury.
Xelos A 26
Regulations concerning used batteries stipulate that
batteries may no longer be thrown out with the
household rubbish. Deposit any used batteries free of
charge into the designated collection containers set up at
commercial businesses.
Setting up the remote control for operating the TV
TV
Push the TV button.
How to operate other Loewe equipment is described on page 39.
220-240V~
50/60Hz?
ANT-SAT
ANT-TV
Xelos
A 32/37/42
TV
R
12
Download from Www.Somanuals.com. All Manuals Search And Download.
First installation
If the reception conditions are good, then a room antenna may be used
for DVB-T. Passive and active room antennas are available on the market.
The power is supplied for an active antenna via the antenna connection.
For automatic programming or in “TV Menu – Connections – Antenna
DVB – Antenna DVB-T,“ the distribution voltage (5 volts) is to be set
correspondingly.
It may be practical to use a nondirectional antenna. If the location is
outside the normal transmitting range, then a unidirectional antenna may
also be used to improve the reception quality.
Using the common interface module
(only for sets with CI slot)
In order to be able to receive encrypted digital stations, the common
interface module (CI module) and the smartcard both have to be inserted
into the corresponding slot of your TV set. You can purchase the CI module
and smartcard at your specialist dealer. You can find the slot on the back of
your TV set, see the illustrations on pages 6 – 8.
1. Make sure the TV set is switched off with the mains switch on the set,
or pull the mains plugs.
2. First push the smartcard into the CI module as far as it will go. Insert
You can find out more on the digital stations that can be received in your
area at your specialist dealer.
it so that the side with the golden contact chip faces the side of the
module printed with
the supplier‘s brand
logo. Printed arrows
indicate how to insert
If a Xelos A32/37/42 was retrofitted with a PIP tuner or if this is already
integrated in a set with a digital recorder, then plug the antenna into the
antenna input of the PIP tuner and connect the PIP tuner output with the
ANT-TV socket (Tuner 1). See illustrations on page 7/8.
the card. Also follow the
installation instructions
included with the
If a Digital Satellite Tuner 1 has been retrofitted, connect your satellite
antenna system to the ANT-SAT socket.
smartcard.
If a Digital Satellite Tuner 2 has been retrofitted (only in conjunction with
the Digital Recorder+), then connect one antenna cable each, for example
from the antenna switch or from the twin LNC, to both SAT sockets.
3. Slide the CI module ✳ carefully into the slot with
the contact side facing the front. The logo on the
common interface module should be visible.
Eject button
Make sure the module is not twisted in the
process. Do not use force.
When laying the cable, use the cable clips affixed beneath the TV set.
Replace the connection cover on the TV set.
When the module locks, the eject button is
pressed outwards.
Handling the
fabric hose
✳ The CI module and the smartcard are not included
CI module
in the scope of delivery for this set; you can usually
obtain them at your specialist dealer.
Use the fabric hose included
with Xelos A 32/37/42 to lay
the mains cables, antenna
cables or cables from other
electronic components
systematically; then lead the
Switching on
Press the mains switch (for Xelos A 32/37, the set
switches on immediately, the green indicator lamp
lights up).
hose with the cables to the connection boxes. This provides you with an
elegant solution when laying cables.
For Xelos A 26/42:
The red indicator on the set now lights up (standby mode).
The diameter of the fabric hose increases when you push it together
lengthwise (see illustration). This makes it easier for you to push through
cables with plugs.
Switch on the set using the switch integrated in the
indicator.
After switching on, it takes about 2 minutes for the screen to reach full
brightness due to the LCD technology.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
First installation
9. You should receive a picture with sound with the settings previously
made (only for ASTRA 1 and HOTBIRD). Then press OK.
10.In the “Pre-programming“ menu, select the factory-set pre-
programming to programme the satellite stations quickly.
To ensure all stations that can be currently received are searched for and
saved, select “No“ at this point.
Automatic programming
Automatic programming of the TV set is started the first time you switch it
on. Follow the menus.
By tilting the OK button in one of the arrow directions, you
OK
can choose the settings ...
Symbol rates: The standard symbol rates 22000 and 27500 are preset.
If you would like to receive stations with different symbol rates, specify
the corresponding values here using the numeric buttons on your
remote control.
... and confirm your settings by pressing OK. You then go
to the next menu.
OK
Back to the previous menu.
11.Press OK to obtain an overview of the settings with which the
automatic programming is to take place.
1. First you have to select the menu language.
2. By pressing the OK button, you can call the menu “Connect antenna(s)
for“. If you want to receive digital stations via satellite, then choose
12.Press the OK button again and the station search will start. The TV set
searches for, sorts and saves all the TV stations that can be received,
according to your settings and the antennas connected.
13.When the TV stations are saved, you will receive a corresponding
message.
14.Press the OK button and the set then searches for the radio stations.
15.The TV set searches for, saves and sorts all radio stations which can be
received with your antenna system.
“Satellite DVB-S“ - confirm using
the yellow colour button. If
First installation wizard
Connect antenna(s) for
Antenna/cable (analogue)(to ANT TV)
you also want to receive digital
terrestrial stations (DVB-T),
then select “Antenna DVB-T“.
Also select “Antenna/cable
Antenna DVB-T
Antenna DVB-C
Satellite DVB-S
(to ANT TV)
(to ANT TV)
(at ANT SAT)
Connect
Back
OK
Proceed
(analogue)“ - this way the standard
16.Then log on your video equipment, decoder and audio system using
the connection wizard and connect these to the TV according to the
connection diagram displayed. If you want to connect other equipment
later, you can find information as of page 32.
analogue stations can also be searched for and saved. If you can receive
digital stations from the cable network, then select “Antenna DVB-C“
using the yellow colour button.
3. For the country-specific station sorting, enter the location.
4. If you have selected “DVB-T“, you then reach the menu “Antenna DVB-
T“. If you use an active antenna, then select “yes (5V)“.
5. In the “Select satellite installation“ menu, make the selection that
corresponds to your satellite antenna installation.
You can repeat the initial installation at any time, e.g. after moving house.
Call the index using the INFO button (in the TV mode, if no menu is
opened). Select the index item “Repeat initial installation“ (you will find this
listed separately before the letter A). Press OK to start the initial installation.
Note: If you have any questions on how your satellite antenna
installation is configured and on the antenna settings, consult your
antenna installer or your specialist dealer.
Note: For DVB-T stations in UK the stations are tied to “Logical Channel
Numbers” – “LCN” and sorted from 1–799. Digital station without “LCN”
are stored from 800 onwards. Analogue stations are stored from1001.
6. Select the satellite the antenna is directed at, such as ASTRA1.
If you only receive one satellite...
Station sorting
Note: not with DVB-T stations in UK.
You can change the station sorting that was carried out automatically later
at any time, see “TV menu –Settings– Stations– Change stations“.
7. In the following menu, specify whether the station search should take
place in the high and low band (“Yes“) or only in the low band (“No“).
Note: For most satellites, a station search is required in both bands.
8. For the low band and high band, the standard frequencies 9750 MHz
(9.75 GHz) and 10600 MHz (10.6 GHz) are preset.
If your satellite antenna is equipped with an LNC (LNB) with a divergent
oscillator frequency, specify the corresponding frequency for low and
high band respectively.
Note: The correct display of the received
frequencies in the “TV menu – Stations – Manual adjustment“ depends
upon this setting.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
First installation
Daily operation
Directing DVB-T antenna
Note: not with DVB-T stations in UK.
Switch on/off
Your TV is equipped with an eco-standby power supply unit. On standby,
the power consumption drops to low power. If you want to save even
more electricity, switch the set off with the mains switch. However, please
bear in mind that EPG data (electronic programme guide) will be lost and
programmed timer recordings will not be performed by the TV.
If you use a room antenna to receive one or more DVB-T stations that have
picture and sound interference, then you should change the location of
where the antenna is set up. To help you direct your antenna or to help
you determine the most suitable location to set up the antenna, your TV
set has a display for the signal quality C/N and the signal strength Level.
Consult your specialist dealer to find out which channels and frequency
bands (VHF or UHF) are used to broadcast the digital TV stations in your
area.On any one channel, several digital stations are broadcast.
Select a TV channel
Switching off
If the TV set is switched on, you can switch it to standby
using the blue ON/OFF button on the remote control or
by using the indicator field on the set. The red lamp on
the TV set lights up. If the orange indicator lights up or if
both the green and red indicators light up, then, for Xelos
A 32/37, a timer recording is being made, EPG data is
being captured or radio operation without screen display
is active.
1. Call the “TV menu“ via the MENU button.
2. Use ꢀꢁ to select “Settings“, then use ꢂ to select the menu line
underneath.
3. Select “Stations“, then use ꢂ to select the menu line underneath.
TV menu
INFO
END
Settings
Stations
Switching on the TV set
ꢀ
ꢀ
parental lock On-screen displays Timer fu
...
Manual adjustment
From standby, it is best to switch the set back on using the
blue On/Off button or by using the numeric buttons of the
remote control (1 – 99).
4. Select “Manual adjustment“ and call the menu using OK (in UK, the
manual adjustment does not work with DVB-T).
Manual adjustment
3
3
Signal source
Channel
DVB-T
E 05
DVB-C Antenna/cable (analogue)
Or, for Xelos A 26/42, use the switch integrated in the
indicator on the set.
The green indicator on the TV set lights up.
Frequency
Name
Bandwidth
177.50 MHz
est
T
7 MHz
C/N 96
Level 99
END
5. For digital stations, select “Signal source – DVB-T“.
6. Use the numerical buttons to specify the corresponding channel
number.
Or switch on the TV set with OK, you can then see the
station list and select a station.
OK
Depending on the channel selected and country, the system
automatically sets the corresponding bandwidth of 7 or 8 MHz. You
should only change the bandwidth under special circumstances - if the
channel raster in your area is different from the standard.
When you receive a digital station, the system displays the signal quality
C/N via a bar/numeric value and the signal strength via Level. The
antenna‘s direction or position is best when the largest values possible
are displayed (long bar) for the signal quality and signal strength.
7. Direct the antenna so that a maximum numerical value/bar size is
achieved.
Switching the radio on
With the RADIO button on the remote control
RADIO
or for Xelos A26/42:
Switch on radio using R on the control ring of the TV set.
If you switch off the TV set using the mains switch on the set, the indicator
no longer lights up.
For Xelos A 26/42: If the TV set is switched off via the mains switch, then
you have to first switch it into the standby mode via the mains switch and
then switch it on by using the blue On/Off button on the remote control or
by using the indicator window on the set.
8. If no signal is found in the channel set, you can start the frequency
search run by pressing the blue button within the band selected (VHF or
UHF).
9. Check the other channels one after another on which digital stations
are broadcast terrestrially in your area.
For the weakest station, direct the antenna so that the maximum
numerical value/bar size is achieved.
10.After you position or direct the antenna, we recommend to search
for all the stations using the “Search wizard“ (TV menu – Settings –
Stations – Search wizard).
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Daily operation
... via the station list
Changing stations
... with the P+/P- buttons on the remote control
Use OK to call the station list
OK
Station list
COMP. IN
Numerical
P+
6
7
8
9
3SAT
S–RTL
N–TV
DSF
HDMI/DVI
VGA
AVS
DVD
VCR
VIDEO
ARD
ZDF
SAT.1
RTL
VOX
V–
V+
OK
OK
Stations up/down
10 TM3
11 PRO7
12 RTL 2
13 WDR 3
14 BR
15 HR
16 MDR 3
17 N 3
P–
0
1
2
3
4
5
ꢀ
OK
ꢀ
When changing, the station display is visible for a few seconds.
41 ZDF
Eifellandschaften
21:00 – 21:45
If additional languages are broadcast with DVB stations, then the set
displays the language/sound selection under the station display. Call the
language/sound selection by using the green colour key and select
using ꢃꢂ.
21:00 - 21:45 Eifellandschaft
OK
END
Switch to ...
... Select station
Scan stations
Change stations
Change sorting
0
9
Select the station (if possible, the selected station will be
OK
displayed as a small picture)
or ...
... with the numeric buttons of the remote control
The set has a dynamic memory with 430 (with DVB 1680) station memory
locations. If up to 9 stations are stored, you only need to enter one digit;
up to 99 stations, two digits are needed; up to 999 stations, three digits are
needed; above 1000 stations, four digits are needed (refer to the station list
to see how many stations have been stored).
AV
... select with numeric buttons
call selected station
wxyz
OK
1 digit stations
Press buttons 0 - 9 for one second, and the station
changes instantly.
pqrs
blue button: sort alphabetically/according to bouquets/
numerically
long
Station list
COMP. IN
Alphabetical
Or press button 0 – 9 briefly, the station then
changes after 2 seconds (the station changes
immediately when only 9 stations are saved).
2 digit stations
CNN INT.
CAM
HDMI/DVI
VGA
AVS
DVD
VCR
DELUXE
DSF
pqrs
ab
After briefly pressing the first numeric button,
keep the second numeric button pressed for one
second, the station then changes immediately.
Or press both numeric buttons briefly, the station
then changes after 2 seconds (the station changes
immediately if up to 99 stations are saved).
3 digit stations
EUROSPRT
ꢀ
ꢀ
OK
ARD
short long
HOT
HR
BR-ALPHA
BR3
KIKA
21:00 - 21:45 Eifellandschaft
OK
END
Switch to ...
... Select letter
Scan stations
Change stations
Change sorting
a
z
After briefly pressing the first and second numeric
buttons, keep the third numeric button pressed
for one second, the station then changes
immediately.
Or press the three numeric buttons briefly, the
station then changes after 2 seconds (the station
changes immediately if up to 999 stations are
saved).
For an alphabetical display: Enter letters with the numeric button (like on a
mobile phone keypad), select with ꢂꢃꢀꢁ and call with OK.
For bouquet display (sorting according to broadcasting chains, only for sets
with DVB, not for DVB-T stations in UK): Enter bouquet number, select with
ꢂꢃꢀꢁ and call with OK.
pqrs
short short long
Digital stations are indicated by D ; encrypted stations are indicated by D
. Child-protected stations are indicated by
.
4 digit stations
Press the four numeric buttons briefly, the channel
then changes immediately.
Call last viewed station ((for DVB-T stations in UK)
You can switch back and forth quickly between two
stations using this button.
tuv
all short
OK
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Daily operation
TV menu
Sound
Bass
6
INFO
END
Basics about the menu operation
Menus are called via the MENU button or via the button for special menus
and can be hidden by using these buttons or by using the END button.
The menu is displayed in the bottom section of the screen. At the top, you
can see additional information for the menu point selected. In the menus,
navigate by using the cursorꢃꢂꢀꢁ. You can make settings by using
ꢀꢁ. When you exit the menu, the settings are adopted.
ꢀ
ꢀ
OK
OK
Set the bass tones by using ꢀꢁ.
If you want to make other sound settings, move up with ꢃ
to “Bass“ and select with ꢀꢁ, e.g. “more...“. You can also
move up further to “Sound“ by using ꢃ and select other
settings in the TV menu (such as, picture settings).
Example of the menu operation
TV menu
INFO
END
We shall demonstrate how to navigate with the menus using the TV menu
as an example. You can see which buttons you can use in the dark blue
field on your TV set.
Sound
more ...
ꢀ
OK
ꢀ
Bass
Treble
Use OK to call additional sound settings.
OK
MENU
Open TV menu (in TV mode).
TV menu
INFO
END
Sound
Loudspeaker sound
Stereo
Picture
ꢀ
ꢀ
Bass
Headphone volume Headphone sound Auto vo
...
Here you can adjust among other things: Contrast, colour, brightness,
sharpness, tint, picture adjustment, picture format.
Select the sound setting using ꢀꢁ, e.g. “Auto volume“
OK
and ...
TV menu
INFO
END
Sound
sound Auto volume
off
ꢀ
ꢀ
AV audio signal
...
Maximum volume
Balance
OK
OK
... use ꢂꢄ to select the auto volume option.
TV menu
INFO
END
Sound
INFO
END
TV menu
Picture
Picture adjustment
Auto volume
off
ꢀ
Sound
...
Recording
Connections
Settings
ꢀ
on
Use ꢀꢁꢄ to select “on“ and activate the auto volume.
Select the function in the TV menu, e.g. “Sound“ (for
sound settings). Use ꢁ to move the menu points
displayed on the right into the dark blue field; use ꢀ to
move the menu points displayed on the left.
TV menu
Sound
INFO
END
OK
Auto volume
on
ꢀ
ꢀ
off
INFO
END
TV menu
END
Press the END button to hide the menu.
ꢀ
Connections
Settings
Picture
Recording
Sound
Treble
...
Apart from the TV menu shown here, other menus can be opened in TV
mode as follows:
Select the sound function below with ꢂ or OK; you will
then see a list of the sound settings.
OK
Call the Sound menu directly.
Call the Picture menu directly.
TV menu
INFO
END
Sound
Treble
4
ꢀ
ꢀ
Bass
more ...
Call normal/factory values (for DVB-T stations in UK: call
menu “Additional functions”).
In the sound settings, also select the function with ꢀꢁ,
OK
e.g. “Bass“ (for increasing or reducing the bass tones).
Green coloured button: Quick calls for teletext subtitles,
personal text pages, headphones volume, to scan stations
and to move the picture up and down.
TV menu
INFO
END
Sound
ꢀ
ꢀ
more ...
Treble
Bass
6
P+
Using the volume control, you can also open other sound
settings, such as Sound via, Sound standards, Sound effects
and Loudness.
To set the bass tones, use ꢂ or OK to select the setting
bar underneath.
OK
V–
OK
P–
V+
The key ꢃ or OK must be pressed for the duration of the
volume display for this.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Daily operation
Use ꢂ to select the line below, for example “Search
wizard“.
For the info system ...
OK
For each menu point, an info text is displayed at the top of the picture to
help you with the setting. This saves you from having to refer back to the
operating instructions. We shall demonstrate this using the station search
option as an example:
Search wizard
Use this menu to search for stations automatically once certain settings
have been made.
If you want to search for stations with other than the displayed
settings, select the "Change settings" menu.
MENU
Call the TV menu.
OK
Select “Settings“.
Settings
Here, you can search for the stations automatically or manually as well
as set the menu language, timer functions, parental lock, on-screen
displays, etc.
TV menu
Settings
INFO
END
Stations
Search wizard
ꢀ
ꢀ
Manual adjustment Change stations
The info text explains how you are to proceed.
Upon delivery, the TV set is configured so that the info texts are always
displayed (Automatic info “yes“). In this case, you can hide the info texts by
using the INFO button.
You can also configure the TV set so that you call the info texts when
needed by using the INFO button (Automatic info “no“). You can find the
setting to switch the automatic info option on or off via “TV menu under
Settings – Miscellaneous – On-screen displays – Automatic info – yes/no“.
INFO
END
TV menu
Settings
Stations
ꢀ
Recording
ections
Picture Sound
Conne
...
In this example, you can see the options available after “Settings“.
If you want to search for new stations, for example, use ꢂ
OK
to select “Stations“ in the line below.
Stations
The menu contains the automatic station search and the manual station
setting. You can re-sort stations, enter and change station names and
delete stations.
TV menu
INFO
END
Settings
ꢀ
ꢀ
Stations
Search wizard
Parental lock Timer functions Language Mi
...
The info text indicates which settings you can make in “Stations“.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Daily operation
For example, you want to have the TV set switch off automatically:
Select the index item “Switch off“ – “Automatic“.
For the index ...
Using the index, you can access many operational functions directly.
You can also find a great deal of information on technical terms about
television. Before the alphabetical sorting, you can find the menu language
option, the list of features integrated into the TV set and the repeat initial
installation option.
You can set your TV set to switch off to stand-by mode once or every
day at a given time.
Call the index in the TV mode (without any other on-
screen displays).
Index
Switch off
Automatic
Manual
Symbol rate*
Teletext
INFO
ꢀ
OK
ꢀ
In the "TV Menu->Settings->Language" menu you can select your
language for operating the TV set.
Activate
Character set
FLOF
END
OK
ꢀ
P+ Page Ç/È
ꢀ
Previous/next letter
Activate
a
z
... Select letter
P–
Index
Language
ꢀ
OK
ꢀ
Use the OK button to call “Switch off“ – “Automatic“.
OK
Integrated features
Repeat initial installation
*
Switch off today only
If you want your TV set to switch off once automatically (to stand-by
mode) select "yes" and enter the time.
Access code
Active window (PIP)
Automatic channel programming (ACP)
AV (Audio/Video)
END
OK
ꢀ
ꢀ
Previous/next letter
Page Ç/È
Activate
P+
P–
a
z
... Select letter
Info on the index item selected is visible at the top of the picture. If the
OK symbol is displayed in the line selected, you can use the OK button to
access the menu directly and carry out settings or selections.
TV menu
Settings
This is how to select the index item:
INFO
END
Timer functions
ꢀ
ꢀ
Switch off today only
no
Switch off daily One-time reminder
...
Wake
Enter the first letter using the numeric buttons on the
remote control (like on a mobile phone keypad);
abc
wxyz
or
The corresponding menu “Timer functions“ is displayed (in the TV menu –
Settings). You can now choose between “Switch off today only“ and
“Switch off daily“ and enter the time.
use ꢀꢁ to go to the previous/next letter,
or
OK
P+
V–
V+
OK
use P+/P– to scroll up or down through the pages
P–
OK
and use ꢂꢃ to go from line to line.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Daily operation
Setting the sound
Setting the picture
Volume and other frequently used sound settings
Open the Picture menu
P+
INFO
END
Picture
Picture adjustment
normal
ꢀ
ꢀ
Contrast
...
Colour Sharpness
more ...
Setting the volume
V–
OK
P–
V+
Volume
24
...
ꢀ
ꢀ
use ꢀꢁ to select the picture function to be set and use
OK
by using ꢃ or OK, you can call other sound settings ...
ꢂꢄfor the related selection ...
OK
OK
INFO
END
Picture
Colour
6
ꢀ
Volume
24
ꢀ Sound adjust
Sound effects Loudness
ꢀ
ꢀ
OK
and select using ꢀꢁ ...
... and use ꢀꢁꢄto set/select.
ꢀ
ꢀ
Sound adjust
normal
Sound effects
Loudness
Volume
V
Picture settings: Picture adjustment, Contrast, Colour, Sharpness. Under
“more ...“, you can find settings for Brightness, Picture format, Move
picture up/down, Auto format and Film quality improvement (DMM) ✳.
OK
OK
use ꢂ for the related selection/setting...
Sound adjust
ꢀ Classic Speech
ꢀ
normal Pop
no
Direct control on TV set
On page 4 and 5, you can find illustrations of the control units located on
... and use ꢀꢁ to make the selection/setting there.
the set.
Sound adjustment allows you to adjust the sound characteristics to the
station‘s sound. The Sound effects settings allow you to expand a Dolby
Pro Logic Signal to a virtual surround signal by using “Dolby Virtual“; by
using “Panorama“, you can enhance the foundation of the stereo sound
virtually for the loudspeakers.
Switching station on the TV set
Station up: with the button +
Station down: with the button –
Switching the radio on/off or switching over to the radio
Press R to switch the radio on or off (not for Xelos A 32/37).
Sound off/on
Sound off;
Additional functions via the menu
Sound on: Press button again or adjust volume.
In the radio or TV operating modes, you can make settings for Volume,
Brightness, Contrast, Picture format and Stations. “Service“ is intended for
the customer service department.
Sound off
Sound on
Other sound settings:
use M or
to call the menu
M
Call the Sound menu
Direct control on TV set
Operating mode
TV
INFO
END
ꢀ
ꢀ
Volume
Brightness Contrast
Picture fo
Sound
Treble
4
ꢀ
ꢀ
more ...
Bass
use – or + to select the function to be set
use ꢀꢁ to select the sound function to be set and use
OK
OK
Direct control on TV set
g mode Volume
24
ꢂꢄfor the related selection ...
ꢀ
ꢀ
Brightness Contrast Picture format Stat
INFO
END
Sound
Bass
6
ꢀ
ꢀ
use R or
for the related setting/selection
M
Direct control on TV set
and use ꢀꢁꢄto select/set.
Volume
18
ꢀ
ꢀ
Sound settings: Treble and bass. Different menu items are displayed
depending on the connected audio device (AURO, hi-fi amplifier).
use – or + to set/select.
Under “more ...“ you will find the sound selection for loudspeakers and
Use M or
select other functions.
to move one level up; you can use – or + to
headphones, auto volume, headphone volume, AV audio signal, maximum
volume and balance.
M
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Modes of operation – TV
For the status display, the DVB station providers may offer additional
selection options for each station. Thus, the corresponding colour key or
the TEXT button is displayed:
TV
In initial installation and daily operation, the TV set is in TV mode. This is
also the case when none of the other modes of operation, such as EPG,
Teletext, PIP or Radio, have been selected.
Red: channel selection for multi-channel providers.
Green: language/sound selection.
Yellow: time selection.
Each of these operating modes has a separate menu with separate
functions for the colour buttons. Call the menu via the MENU button.
How the colour keys work in TV mode
Note: The coloured keys do not work as described below with DVB-T
stations in UK, but they operate as described on page 30 (Digital Teletext).
Blue: protection of minors.
TEXT
DVB subtitles.
Red: the TV picture freezes. Pressing this button again
starts the picture moving again.
If you press one of the colour keys during the status display or you press
the TEXT button, the related selection menu is displayed.
The status display subtitles refer only to the “DVB subtitles“ and are not
provided by all stations. The options you see depend on the particular
station (many stations broadcast subtitles via teletext).
Green: select additional functions such as Teletext subtitles,
Personal teletext pages, Headphone volume and PIP scan.
The status display is displayed automatically when a new programme
begins with options different to the previous one.
INFO
END
Additional functions
Teletext subtitles
ꢀ Personal teletext pages Headphone volume
ꢀ
OK
Notes:
Yellow: call last viewed channel. You can switch back and
• In the Sound mode, Mono! means that you have switched manually
from stereo to mono, for example.
forth quickly between two stations using this button.
• The selection menus are only available as long as the status display is
displayed. You can call them again at any time by pressing the END
button on your remote control.
Blue: call Programme info.
1
ARD
Eifelland
14:30 - 15:15
Calling the index
INFO
Calling the index
In the "TV Menu->Settings->Language" menu you can select your
language for operating the TV set.
Index
Language
Integrated features
Repeat initial installation
*
END
Programme info
Detailed info
14:43
ꢀ
OK
ꢀ
ꢀ
ꢀ
OK
Detailed info (teletext) Programme preview
Show Status display
Access code
Active window (PIP)
Automatic channel programming (ACP)
AV (Audio/Video)
END
Show/hide status
END
OK
ꢀ
ꢀ
Previous/next letter
Page Ç/È
Activate
1
ARD
14:42
Language/sound selection
Eifellandschaft
14:30 - 15:15
Stereo
P+
P–
a
z
... Select letter
Alarm time 20:00
Sleep timer 23:00
You can find more information on the index on page 19.
In the line above, you can see the name of the station and the sound
mode. Displayed below are additional options (Time, Sound mode, Alarm
time and Sleep timer) that can be selected in the “TV menu – Settings –
Miscellaneous – On-screen displays“.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Modes of operation – TV
Standard settings picture and sound (for DVB-T stations in UK: call menu
“Additional functions”)
For a recorder that is logged in, you can find the following menus in the
“Recording wizard“:
Recording wizard - to programme new timer recordings
• Via EPG (not for DVB-T in UK) • Via (analogue) teletext (VPS) • Manual
You will find further information about timer recording on page 33.
Timer list
Here you will find a list of channels programmed for recording. You
can change the recording data or delete programmed recordings and
programme new recordings.
Call personal settings/factory settings for picture and
sound, save picture and sound settings as personal
settings.
INFO
END
Standard settings
Call up personal settings
ꢀ
ꢀ
OK
Call up factory settings Store as pers
OK
Activate
Call timer overview
Pre-record time and post record time
If timer recordings have been programmed, you will see
when which station is recorded here.
For recordings without VPS/PDC, set a lead and lag time here so that the
programme is fully recorded despite any slight differences in the time.
Under “Connections“ you will find the following functions:
New devices/modifications (connection wizard)
Timer overview
Fri 12.09./14:12
12.09. 18:00-18:30 3SAT Die Köchin, die Putzfrau und d
The connection wizard helps you connect and log in additional equipment
such as video recorders, DVD players/recorders, camcorders/digital
cameras, pay TV decoders, equipment with component signals and digital
HDMI/DVI signals.
TEXT
END
Detail
New recording
Change
Delete
INFO
Antenna DVB (only for sets with DVB)
•Antenna DVB-T •Satellite DVB-S
Select picture format
The TV set sets the best picture format automatically
You can find more information on pages 14 and 15.
when Auto format is switched on. If you want to set a
different format, press this button until the desired format
is selected or select the format with ꢀꢁ.
Digital Link Plus
Transmission of the programme data from the TV set to the video/DVD
recorder if a recorder with Digital Link Plus is connected.
Picture format
Miscellaneous (connections)
16:9
4:3
Panorama
Cinema Zoom
• Set AV standard for the connections manually (if it is not recognised
automatically).
Move picture up/down
To make picture subtitles visible, you can useꢃꢂto
move the picture up or down with the picture formats
“Panorama“, “Cinema“ and “Zoom“.
• “Assign audio digital signals“ to one of the AV sockets.
• “Allow switching voltage“ to display the signals of the connected device
immediately on the screen via Euro AV during playback.
• RGB insertions at AV2 to play back RGB signals at all station storage
locations.
OK
Note: for DVB-T stations in UK you can switch back and forth quickly
between two stations using this button
• Select decoder stations and set sound encoding.
TV menu
Under “Settings“ you will find the following functions:
Stations
MENU
Call up the TV menu
Here you can search for and store new stations automatically or manually.
With “Change stations“, you can rearrange and delete the stations and
change station names (not for DVB-T stations in UK).
INFO
END
TV menu
Picture
Picture adjustment
ꢀ
Sound
...
Recording
Connections
Settings
• Search wizard
• Manual adjustment
• Change stations
You will find a description of the picture and sound settings on page 20.
The TV menu offers other options for recording, connections and settings
of the TV set.
Parental lock
You can lock the TV from “now“ or daily for a certain period of time.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Modes of operation – TV
Timer functions
DVB subtitles
You can have your TV switch off at pre-programmed times or wake
you/remind you with radio or TV. If you are not present at the time, a safety
prompt makes sure the TV switches off again after 5 minutes.
• Switch off today only • Switch off daily • One-time reminder
• Wake up Mon-Fri • Wake up Sat • Wake up Sun • Wake up with ✳
• Wake up signal volume
If the station provides DVB subtitles, then you can have the TV display them
permanently or suppress their display. You can also select between subtitles
“for translation“ or “for impaired hearing“.
1. Call the “TV menu“ via the MENU button.
2. Select the “Settings“ line and confirm using OK.
3. Select the “Miscellaneous“ line and confirm using OK.
Language
If “your“ menu language is not set, you have to select the “Language“
menu in a language that you do not understand. Therefore here is a simple
way to set the right menu language:
1. Press the INFO button (index), select the first listing (this is above A).
2. Call the language selection by pressing the OK button.
3. Now select the desired language and confirm it by pressing the OK key.
4. Hide the menu again with the END button.
4. Select the “DVB subtitles“ line and confirm using OK.
DVB subtitles
Subtitles off
for impaired hearing
END
for translation
INFO
Note: If you have selected “Subtitles off“, then the set generates an on-
screen display when subtitles are available.
Miscellaneous (settings)
On-screen displays
By using the END button, you can open the status display and you can
display the subtitles again by using the TEXT button.
You can set the duration and position of the station and status display,
define the content of the status display and switch the automatic info texts
on or off:
• On-screen display position • On-screen display time • Programme title
• Sound mode • Time • Alarm time • Sleep timer • Automatic info
• Call the status display by pressing the END button, if it is not yet
displayed.
• When the status display is visible, press the TEXT button.
Select the desired language and confirm using OK. The presetting
changes for the current programme.
• Which subtitle languages can be selected depends on the provider.
• The automatic shortlist is determined by the menu language and the
selection made in the “DVB subtitles” settings menu.
• By pressing the END button, you can hide the menu again.
Time and date
If you receive teletext, the set registers the time and date. These are
required for timer recordings, timer functions and EPG. If you do not
receive teletext, then you have to enter the date and time; you should not
switch off the set using the mains switch since the settings will then be lost.
Digital-TV software
Update of DVB software via satellite ✳ or CI module.
Note: DVB-T subitles are not available when Digital Teletext is selected.
DVB subtitles
• Subtitles off • Subtitles for impaired hearing
• Subtitles as translation for foreign language programmes
DVB character set
• Western European • Polish • Standard.
✳ only for sets with DVB
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Modes of operation – TV
Removing the CI module
Confirm using OK, so that the new software can be loaded and installed via
1. Switch the TV set off by pulling the mains plug
from the power outlet.
satellite. Continue as set out in the “Downloading the software“ section.
2. Remove the cover from the back of the set on
the upper left.
3. Press the eject button at the module slot; the
module is unlocked.
Searching for new software
If you want to carry out a manual search for new software, proceed as
follows:
1.Call the TV menu using the MENU button.
2.Confirm the “Settings“ using OK.
4. Remove the module from the set.
CI module
3.Confirm the “Miscellaneous“ using OK.
Inserting a new CI module
After you insert a new CI module and switch the TV
set on, the following dialogue is displayed:
4.Select “DVB software“ and press OK.
Update digital TV software
Current version: V3.x.x
Autom. station search
You can search for a new software version with OK.
Your TV set has detected a new CI module. This requires a station
search for all new receivable stations.
5.If you start the search using OK, the set checks if there is a new software
After you press the OK button, the system starts the wizard to carry out the
automatic station search.
Check the proposed search parameters and let the set search for new
stations.
version available.
6.If there is a new version available, the set generates an on-screen
message.
Update digital TV software
Current version: V3.x.x
New version: V3.1.0
Calling the CI module menu
Here you can call up information on the inserted common interface
module and the smartcard. To do this, use the MENU button to call the TV
menu, select the line “Settings”, “Miscellaneous” and then the entry “CI
module - xxx” (in place of “xxx” stands the name of the provider which
is output by the smartcard. The content of this menu depends on the
particular supplier of the CI module.
Downloading software
1.If you press OK in the dialogue above, you can decide whether you want
to download the new software immediately, when you switch off the
set or not at all. We recommend you always carry out the update of the
digital software. This is the only way to ensure your set is always up to
date.
Note: This menu is only available for digital stations.
Installing new DVB software
2.If you do decide to update, the software is initialised on your set and you
are informed of the status with a grey bar.
Do not switch your set off during this time. This process may take up
to one hour. You will be informed when the process is completed.
To ensure your DVB-S receiver is always performing at the state of the art,
newly developed software versions are made available from time to time;
these are broadcast via satellite and can be automatically installed on your
set (only possible via ASTRA1).
3.After the software is updated, you will be asked to switch your TV set off
and back on again using the on/standby switch.
Software is recognised automatically
The set can determine whether a new software version is available. This
occurs at night when your EPG is automatically updated. For this, your TV
set has to remain in the standby mode (do not switch off using the on/off
button on the set).
If the update was not carried out, you will be asked several times when you
switch on the set whether you want to carry out this update.
If a new software version has been found, the set will indicate this with an
on-screen message the next time the set is switched on: You can decide
whether or not you want to download the new software.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Modes of operation – PIP
Select the station of the TV picture (main picture)
The bar/frame has to be white. If not, press the green
colour key. Then select the station as usual.
Picture in picture (PIP)
Note: The coloured keys do not work as described below with DVB-T
stations in UK, but they operate as described on page 30 (Digital Teletext).
Picture in picture displays are possible if the set has an analogue PIP tuner
or a digital satellite tuner in addition to the analogue TV cable tuner. You
can have a PIP tuner (not for Xelos A 26 and sets in UK version) or a digital
satellite tuner retrofitted. If there is no other tuner installed, you can use PIP
(AV-PIP) when playing a video recorder or DVD player.
For a retrofitted PIP tuner, the following PIP displays are possible: Main
picture analogue – PIP picture analogue, Main picture digital – PIP picture
analogue.
The following is not possible: Main picture digital – PIP picture digital, Main
picture analogue – PIP picture digital.
41 ZDF
Eifellandschaften
21:00 – 21:45
For “Split screen,“ the PIP picture is displayed on the right side of the
screen. Both pictures share the screen in two equal halves. For the “Small
PIP“ setting, a small picture is displayed in the TV picture.
The green bar/frame indicates that the control commands have an effect
on the PIP picture. The white bar/frame means that the control commands
have an effect on the main picture. Use the green colour key to switch
between the PIP picture and the main picture, for example to change
stations.
Scan stations in the PIP picture
The bar/frame has to be green. If not, press the green
colour key.
Start scanning the stations using the blue colour key. The
bar/frame turns blue.
The stations now change automatically. Stop scanning the stations by using
the blue colour key. The bar/frame turns green again.
The frame or bar between the pictures is green for the time being.
PIP
Show/hide PIP picture
Interchanging PIP picture/TV picture
PIP picture as freeze picture
The bar/frame has to be green. If not, press the green
The bar/frame has to be green. If not, press the green
colour key.
If you press the red colour key, the PIP picture freezes. Press
again - moving picture.
colour key.
Interchange the pictures by using the yellow colour key.
Selecting the station of the PIP picture
The bar/frame has to be green. If not, press the green
colour key. Then select the station as usual.
1
ARD
Der Wilde Westen
Eifellandschaften
21:15 – 22:15
21:00 – 21:45
41 ZDF
1
ARD
Der Wilde Westen
21:15 – 22:15
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Modes of operation – PIP
Functions in the PIP menu
In the PIP menu, you can set the PIP type (small PIP or split screen) and the
position of the small picture.
Position of the PIP picture
Move the PIP picture with the arrow keys to a corner
OK
of the TV picture. In this case, the frame around the PIP
picture has to be green, and there should not be any other
displays visible on the screen.
MENU
Call the PIP menu (PIP must be active, green bar/frame)
TV menu
Settings
INFO
END
PIP
Type
ꢀ
ꢀ
mall PIP Split screen
Sm
Setting the PIP type
You can have the PIP picture displayed as a small PIP or split screen.
Switch to split screen:
You can have the PIP picture displayed on the right hand side of the screen.
Both pictures share the screen in two equal halves. You will see a coloured
vertical bar between the pictures
Switch to small PIP:
OK
Select “Type“ and then “Small PIP“
MENU
Call the PIP menu (PIP must be active, green frame)
OK
Select “Type“ and then “Split screen“.
TV menu
Settings
PIP
INFO
END
Type
Small PIP
ꢀ
ꢀ
Split screen
TV menu
Settings
For the small PIP, you will see a coloured frame around the PIP picture.
INFO
END
PIP
Type
ꢀ
ꢀ
mall PIP Split screen
Sm
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Modes of operation – EPG
When receiving digital terrestrial and digital satellite stations, you may find
that two identical EPG data are displayed in the “EPG (DVB)“ menu for
one station. If you call the EPG menu in the EPG mode by using the MENU
button, then select “Station selection,“ you can select the duplicate station
and deactivate it by using OK.
EPG - Programme guide
Note: The EPG does not work with DVB-T stations in UK. The “Now& Next”
feature for programme info of the current and next broadcast is displayed
instead.
EPG is an electronic programme guide. With this system, you can easily find
the stations that interest you (sorted according to day, time, station and topic).
You can mark programmes and programme recordings.
You have direct access to the selection lines above to pre-select the day, the
time, the station and the topic.
Blue colour key: Call Select date/time/channels/topics
Depending on whether you are receiving analogue stations by cable/antenna
or digital stations, you will have different programme guides.
A wizard is activated the first time you use EPG (not with DVB) which guides
you through the necessary settings. Then run the data acquisition (see next
page).
EPG (Electronic Programme Guide)
Fri 10.09./14:14
ꢀ
ꢀ
Date
Time
Sat 11.09.
Sun 12.09. Mon 13.09.
06:00
Channels
Topics
all
all
06:00-06:20 ZDF
06:00-06:30 RTL
06:00-06:25 Kabel 1
06:00-06:25 N3
06:00-06:30 BR
06:00-06:30 WDR
Die Blobs
Wunderbare Jahre
Dennis
Extra en español (5)
Goal. Speak English, Play Football
Lokalzeit Südwestfalen
Using the EPG
EPG
Switch EPG on/off
24 Kabel 1
06:00-07:10 SuperRTL Infomercials
06:00-07:10 Kinderkan Reif für die Dodo-Insel (25)
EPG (Electronic Programme Guide)
Fri 10.09./14:14
Fri 10.09.
now
Date
Time
14:00-14:20 9LIVE
Reisetraum
ꢀ
soon 14:00 15:00 16:00 17:0
Comedyserie - Kandidaten mit gewissen Fehlern
all
Channels
Topics
all
OK
13:20-14:15 Kabel 1
13:30-14:15 H3
Die Waltons
ARD-Buffet
END
Change to programme list MENU
13:55-14:20 Kinderkan Blaubär & Blöd (37)
14:00-14:15 ZDF
14:00-15:00 RTL
14:00-15:00 Sat 1
14:00-15:00 Pro7
14:00-14:30 N3
heute - in Deutschland
Das Strafgericht
Zwei bei Kallwass
Das Geständnis - Heute s...
DAS! ab 2
Die kleinen Strolche (10)
Use ꢂꢃ to select the menu line for the date, time, channels or topics. Use
ꢀꢁ to select within the menu line.
If, for example, you are looking for the next news, select today‘s date,
“soon“ under Time, “all“ under Stations and “News“ under Topics.
Then you get a list of all news programmes in the station list below.
24 Kabel 1
14:00-14:20 WDR
Familienserie - Sturzflug
OK
TEXT
P+
P–
END
Detail
View
Record
Date, ... , topics
Page Ç/È
select time
MENU
0
9
...
EPG (Electronic Programme Guide)
Fri 10.09./14:14
Date
Time
Channels
Topics
Fri 10.09.
soon
all
The programme guide menu is divided into two areas: at the top, you can
make the settings for the programme list (date, ..., topics); at the bottom, the
programme list is displayed. Use the blue colour key to switch between the
two areas to make your selections.
All currently running programs are listed initially in the programme list. With
the ꢂꢃ buttons, select the programme you want to watch and switch over
with the OK button.
ꢀ
News
ꢀ Show Hobby Sport Child Kn
15:00-15:15 Das Erste Tagesschau um drei
15:00-15:05 hr-fernse hessen aktuell
15:00-15:15 ZDF
16:00-16:05 SÜDWEST Baden-Württemberg Aktuell
16:00-16:15 Das Erste Tagesschau um vier
heute - Sport
24 Kabel 1
Nachrichten - News
Brief information is shown below the programme list for some programmes. If
more detailed information is available, you can call it using the TEXT button.
With P–, you can scroll to the next page of the programme guide; with P+,
you can go to the previous page. In the selection lines for date and time
above, you will see the time change when scrolling; when you scroll further,
the date also changes.
END
Change to programme list MENU
If you want to note one of these news programmes, return to the station
list using the blue colour key, select the desired news programme by using
ꢂꢃand mark this by using OK.
When the “Time“ line is selected, you can enter the time as of which the
programmes are to be displayed; use the numeric buttons on your remote
control to do this. Always enter four digits, such as 0900 for 9 a.m.
If programmes are displayed which have not yet started, you can mark these
with the OK button. The TV set then switches automatically to this station at
the time given.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Modes of operation – EPG
Now all stations are displayed (the DVB stations, too). Stations indicated
with E are analogue terrestrial/cable stations; stations indicated with D are
digital stations ready for the programme guide. Select the stations you
want to omit from the programme guide one after another and deactivate
each one by using OK.
In front of the programme‘s title, the system places an
. This station is
✓
switched to later when the set is switched on. If the TV is off, it switches on
again automatically at the beginning of the marked programme if this
has been set in the EPG menu. If you are out, a security prompt prevents
the TV set staying on unattended.
Before leaving the upper selection lines using the blue colour key, select a
specific line. If you have switched back to the station list, you can change
this menu line using ꢀꢁ without having to leave the station list.
Data entry
After these settings or after each time the set is switched off using the
mains switch, the data must first be collected, before switching on the set.
To do this, select the station you have defined as a provider and leave the
TV set switched on for about one hour or switch the set to the standby
mode. After about two minutes, the orange indicator on the set lights up
(for Xelos A 32/37, both indicators light up). The data capture begins and
lasts about 1 hour. The data are also automatically collected between 2
a.m. and 5 a.m. when the TV is switched to standby.
Programming recording for recorders
You can prepare the station for recording marked using the ꢂꢃ buttons
by pressing the red colour key. In the following menu, confirm the timer
data or change them as required. Then a red dot is set in front of this
programme in the EPG station list as an identification. If you select this
programme, you can delete it from the timer using the red colour key (if
the timer data has been transferred to the recorder, the timer has to be
deleted there).
A prerequisite for data acquisition is that “Data capture“ is “on“ (for DVB +
analogue) in the EPG menu.
Note: If the TV set is switched off using the mains switch or the mains plug
is pulled out, all EPG data are lost.
EPG menu
If, for example, you cannot receive any analogue EPG providers or if you
only use DVB, you should set the data capture to “on (only for DVB)“.
MENU
Call EPG menu
INFO
END
EPG menu
Select provider
ꢀ
OK
Station select Timer list
Data capture Switc
Switch on TV when marked
You can have the TV switched on automatically from standby at the
beginning of the memorised programme. If you are not present at the
time, a safety prompt makes sure the TV switches off again after 5
minutes.
You will find the following settings in the EPG menu:
• Select provider • Station select • Timer list • Data capture
• Switch on TV when marked
Selecting providers and stations
If you want to change the provider for analogue TV reception (the station
which transmits EPG data) to have other stations evaluated, you can do
this under “Select provider“.
Select “Select provider“ and call this menu using OK. If the station you
want to switch to is not listed in the “Select provider“ list, then use the
yellow colour key to start the automatic search for stations with EPG data.
This takes a while.
Or, if you know the station that transmits EPG data, press the blue colour
key to compile manually. Select the provider in the station list and adopt it
by using OK and return to the provider selection using ꢅ.
Select the provider in “Select provider“ and adopt it using OK. Then a
station list search is performed. The stations offered by the provider are
displayed in a list.
If you want certain stations to be omitted from the programme guide, you
can select and deactivate these via Select stations. Call the station selection
by using the blue colour key.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Modes of operation – Teletext
In Multiple pages scroll using ꢀꢁ. You can see which
multiples pages can be called in the bottom menu line.
Analogue Teletext
OK
Teletext transmits information such as news, weather, sports, programme
previews and subtitles.
Zeitplan
Fußball
10 11 12
–
+
1
2
3
4
5
6
7
8
9
TEXT
Teletext on/off
INFO
Call contents page 100
100 100 ARD-Text
ARD TEXT
10.09.04
14:14:42
Index
> 101
Teletext im Ersten
Call the TOP table
The TOP table is a general list of teletext. You can only call
OK
Bulmahn: Bildung statt Eigenheim . . . . . . . . 120
Wird auch der Nahverkehr teurer? . . . . . . . . 121
Australien: Keine Zugeständnisse . . . . . . . . 122
Tote bei Zugunglück in Schweden . . . . . . . . 532
the table for stations that use the TOP operating system.
Bulmahn: Bildung statt Eigenheim . . . . . . . . 120
Tennis: Haas unterliegt Hewitt . . . . . . . . . . . . 204
Formel 1: Schumacher erneut vorne . . . . . . . 213
Wird auch der Nahverkehr teurer? . . . . . . . .
121
Australien: Keine Zugeständnisse . . . . . . . . 122
TOP table
. . 532
Tagesschau . . 110/112
Wetter. . . . . . . . . . . 170
Sport. . . . . . . 200/600
TV Guide . . . 300/400
Kultur. . . . . . . . .
Gesellschaft . . .
Lotto/Toto . .
500
530
666
Übersicht
tagess
Wetter
. . 204
Wetter. . 213
c
h
au
Vorhersage
ꢀ
OK
ꢀ
Städte
Wirtschaft. . . . . . 700
Sport 1
Regional
TV Guide
Reisen
Inhalt
tagesschau
. . 500
–
+
ARD heute
int. Städte
Page selection
. . 530
ARD morgen
Biowetter
666
FS-Sendungen
. . 700
END
TV Guide 2
Many stations use the TOP operating system, some use FLOF (e.g. CNN).
Your TV supports both these systems. The pages are divided into topic
groups and topics. After switching on the teletext, up to 3,000 pages are
stored for fast access.
more . . .
OK
View
Use ꢂꢃ to select the topic group.
Select the topic column using ꢁ.
Select the topic with ꢂꢃ and display page with OK.
Page selection with the coloured buttons
The coloured bars (in TOP) or the coloured writing (in FLOF) in the next to
the last line show you which coloured keys you can use to scroll to topic
groups and topics.
pqrs
Enter the page number directly
Displaying teletext pages
Red: back to the previously seen page (not in FLOF)
Green: on to the next page (not in FLOF)
AV
Stop self-turning pages (HOLD)
Yellow: to the next topic (only in TOP and FLOF)
Blue: to the next topic group (only in TOP and FLOF)
Zoom page: top part - bottom part - normal size (press
button several times)
wxyz
PIP
TV picture on/off (Split Text)
Other page selection options:
Select one page number specified on the page by using
OK
100 100 ARD-Text
ARD TEXT
10.09.04
14:14:42
ꢂꢃ(Page Catching)
Index
> 101
Teletext im Ersten
Formel 1: Schumacher erneut vorne . . . . . . . 213
Bulmahn: Bildung statt Eigenheim . . . . . . . . 120
Wird auch der Nahverkehr teurer? . . . . . . . . 121
Australien: Keine Zugeständnisse . . . . . . . . 122
Tote bei Zugunglück in Schweden . . . . . . . . 532
Tagesschau . . 110/112
Wetter. . . . . . . . . . . 170
Sport. . . . . . . 200/600
TV Guide . . . 300/400
Kultur. . . . . . . . . 500
Gesellschaft . . . 530
Lotto/Toto . .
666
Wirtschaft. . . . . . 700
Inhalt
OK View
Tennis: Haas unterliegt Hewitt . . . . . . . . . . . . 204
Formel 1: Schumacher erneut vorne . . . . . . . 213
tagesschau
–
+
Page selection
Tagesschau . . 110/112
Wetter. . . . . . . . . . . 170
Sport . . . . . . . 200/600
TV Guide . . . . 300/400
Kultur. . . . . . . . . 500
Gesellschaft . . . 530
Lotto/Toto . . . . 666
Wirtschaft . . . . 700
OK
call
Inhalt
tagesschau
–
+
Page selection
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Modes of operation – Teletext
Programme timer recordings
Digital teletext operation (only UK)
A video or DVD recorder must be connected and logged in in the
connection wizard.
Call the programme pages of the current station in teletext mode using
In the UK, the teletext for DVB-T stations (TV and Radio) is transmitted as
per the MHEG-5 standard (standard of the Multimedia and Hypermedia
Expert Group). It contains text, graphics, functions and links.
The operation of these menus depends on the particular provider. Normally
after a station is changed, the provider broadcasting the digital teletext
makes an introductory offer for this service on the screen via menu
selection. Follow these notes.
the Direct recording button
. Scroll to the teletext page in which the
programme to be recorded is listed if necessary. Select the programme you
want to record by with ꢂꢃ and confirm with the OK button. For “Timer
data,” select the VCR or DVD recorder and whether you want to record
once or a series of times. Confirm with OK.
Teletext menu
MENU
Display teletext menu
100 100 ARD-Text
ARD TEXT
10.09.04
14:14:42
Index
> 101
Teletext im Ersten
Bulmahn: Bildung statt Eigenheim . . . . . . . .
Wird auch der Nahverkehr teurer? . . . . . . . .
120
121
Australien: Keine Zugeständnisse . . . . . . . . 122
Tote bei Zugunglück in Schweden . . . . . . . . 532
Tennis: Haas unterliegt Hewitt . . . . . . . . . . . . 204
Formel 1: Schumacher erneut vorne . . . . . . . 213
Tagesschau . . 110/112
Wetter. . . . . . . . . . . 170
Kultur. . . . . . . . . 500
Gesellschaft . . . 530
INFO
END
Menu
ꢀ
ꢀ
cording
Settings
Newsflash
Re
Reveal
Personal text pages
...
Depending on the provider‘s respective offer, you can use the ꢂꢃꢀꢁ
buttons and the OK button, the colour keys, the END/TEXT button and
sometimes even the numeric buttons.
If you want to close the digital teletext, just select a different station using
the P+/P– buttons or follow the menu prompts on the screen.
Here you will find functions such as
• “Newsflash“, this is an on-screen display of the latest messages (e.g. page
111).
• “Reveal” concealed information, e.g. VPS pages in the station preview
pages.
• Programme wizard for recording via teletext.
In the settings, you will find menus to define the station preview pages,
subtitle pages and personal text pages, and menus to set the character set
selection as well as HiText graphics.
Notes:
• Digital teletext is not available when DVB-T subtitles are selected.
• If a timer recording is programmed at the TV-set, at the start time of the
recording the digital tletext mode is switched off automatically
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Modes of operation – Radio
EPG - Programme guide
Note: not with DVB-T stations in UK.
Radio
You can only receive radio stations via DVB. If you do not have any DVB
radio reception, you can play a sound signal from an external device using
the TV set via the sound/AV inputs.
For the DVB radio stations, you can also use the programme guide if the
station currently active supplies data.
Use the RADIO button on the remote control or the R on
the TV set to switch the radio on or off.
RADIO
EPG
EPG- Call Programme guide
Radio:
5
B5 AKTL
9
HR-INFO
D
D
D
D
D
D
D
D
D
D
D
D
AUDIO IN
AVS
10 MDR INFO
11 MDR FIGA
12 NDR KULT
13 SWR1
AV2
AV1
ꢀ
OK
ꢀ
1
2
3
4
5
6
7
8
B5 AKTL
BAYERN 1
BR4 KLSK
SUNSHINE
ROCK ANT
ANTENNE
DLR
D
14 SWR2
D
D
D
D
D
D
D
15 WDR3
16 WDR5
17 OESTER 1
18 MDR JUMP
19 JAZZ RAD
20 BLUSAT20
DLF
OK
END
Switch to ...
Select station
Screen off
Scan stations
Previous station
Change sorting
0
9
...
MENU
You can see a station list of the radio stations or with DVB-T in UK the
station logo. In this case you can call up the station list by using the OK or
INFO key. Station list is sorted by LCN.
If data are sent by the station, then the time and title of the programme are
displayed in the station list.
When the station list is shown you can switch off the screen with the red
colour key. The LED indicator on the set changes from green to orange
or if both the green and red indicators light up, then, for Xelos A 32/37.
You can switch the screen display back on by using the OK key, red or blue
colour keys, by using RADIO or END on the remote control or by using R on
the control ring of the TV set.
Station switching with dark screen: by using – or + on the control ring
of the TV set or by using the remote control P– and P+ or by using
the numeric buttons (for DVB-T operation in UK, the buttons may be
configured differently by the provider).
The sound menu can be called in the radio mode using the
button.
Radio menu
MENU
Call radio menu
INFO
END
Radio menu
Sound
ꢀ
Stations
Timer functions
Treble
...
In the radio menu, as in TV mode, you can set the sound, search for radio
stations and store them (automatically or manually – not with DVB-T mode
in UK), delete stations from the list, rearrange them or change names and
set the switching off and alarm functions.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating additional equipment
Search for and store the station of the video recorder (if no Euro-AV
cable is available)
Switch on the test station on the VCR or insert a recorded tape and start
playback. In some video recorders the station must be switched on by
activating the modulator.
Login and connect equipment
You have logged in and connected all connected equipment in the
initial start-up. If you want to connect other equipment or disconnect
equipment, call the connection wizard.
MENU
Call up the TV menu
Then call the AV selection on the TV set with 0 AV. Select the menu item
“VIDEO“ in the AV selection and call using OK.
To prevent “normal” TV stations being found in the search, pull out the
antenna plug from the antenna input of the VCR temporarily (the cable to
the antenna system).
OK
Select “Connections“
OK
Select the submenu line
If you cannot see the test station or playback from the cassette, the VCR is
transmitting on a different channel. You then have to search for the station
or set it manually.
OK
Select “New devices/modifications“ and ...
OK
Call with OK.
1. Call the TV menu with the MENU button.
State what equipment you want to connect. State whether a piece of
audio equipment is to be connected (more details as of page 35). The
connection wizard then shows you which sockets you should connect this
equipment to. Then connect the equipment to these sockets according to
the connection diagram.
2. Select the “Settings“ menu item with ꢀꢁ.
3. Select the line below using ꢂ and use ꢀꢁ to select “Stations“.
4. Select the line below using ꢂand select “Manual adjustment“ using
ꢀꢁ and call this menu using OK.
5. Enter channel “E30“ under the “Channel“ menu item (UHF range, select
in this menu above, if necessary).
Connecting video/DVD recorders
In addition to the connection via the Euro-AV sockets, you also have to
connect the antenna (only for terrestrial antenna or cable systems) through
the VCR/DVD recorder to the TV set. The antenna signal is then available to
the video/DVD recorder and the TV set.
6. Start search with the blue colour key.
7. If the station has been found, enter the name VIDEO, confirm with OK
and save with the red colour key.
8. A list of the stored stations is displayed.
Note: Use Euro-AV cables with right-angled plugs as shown.
9. Select 0 (VIDEO) here and overwrite this station storage location using
the red colour key.
10.Hide the menu again using the END button.
Plug the antenna plug back in.
If you now get interference because a TV station is transmitting on the
same channel as the VCR station, you have to change the transmitting
station on the VCR and search for the VCR station on the TV again.
AV1
ANT-TV
ENTREE
ANTENNE
EURO AV2
DECODER
AUDIO
AERIAL
ORTIE
G
OUT
L
SORTIE
ANTENNE
EURO AV1
AUDIO/
VIDEO
D
R
RF OUT
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating additional equipment
Video playback
There are several ways to see the picture and hear the sound of the VCR,
Timer recording with video or DVD recorder
You can programme timer recordings on the TV set. Programming can be
done with the EPG programme guide (not with DVB-T in UK), teletext or
DVD player/recorder or camcorder on your TV:
manually. Call the “Timer list” menu with the
button and press the
1. You can usually use the Euro-AV sockets on the TV set and on the VCR.
For camcorders or digital cameras, use the AVS sockets on the right of
the TV set. DVD players/recorders and SetTopBoxes may have HDMI or
component sockets for video and audio transmission. In this case, use
the corresponding sockets on the TV set.
red colour key for the “Recording wizard”. Select whether you want to
programme the recording via EPG, teletext or manually. You also have the
option to programme recordings directly from the EPG programme guide
or teletext.
Note: Copy-protected programmes are not output to the Euro-AV sockets
for legal reasons.
When you have connected the Euro-AV socket to a recorder which has
Digital Link Plus or a comparable system from a different manufacturer,
the timer data of analogue terrestrial stations are transmitted from the
TV to the recorder. The recording quality SQ or EQ is transmitted for DVD
recorders, in additional to the station, date and time. The recording is then
controlled by the recorder and the recorder tuner is used for reception of
the station. The recording data are not saved in the timer list of the TV set.
You will only find the timer data in the recorder.
When playing back from a video recorder using Euro-AV socket and
Digital Link Plus (or a comparable system from another manufacturer),
the picture from the VCR is shown at the current programme location.
When playing back from another VCR, camcorder or digital camera, use
AV
the AV selection
or the station list (OK) to select the AV socket/
the device to which the VCR is connected.
Video recorders transmit a switching voltage during playback, which
the TV can evaluate (can be activated in the connection wizard or in the
“TV menu – Connections – Miscellaneous – Allow switching voltage“ -
set to “yes“). Then the picture of the video recorder is shown during
playback at the current station location.
If you want to record from digital stations, the TV tuner is used and the
recorder is controlled by the TV set. Then the station is locked during the
timer recording.
2. You can use the antenna connection between the VCR and the TV
without a Euro-AV socket. The sound is only transmitted in mono.
Select the first menu item, e.g. VIDEO, in the AV selection.
If you have connected a Loewe video recorder with Digital Link to the
Euro-AV socket (without Digital Link Plus) and you are using the timer
programming of the TV, the TV receiver is always used, for terrestrial
stations as well. The TV controls the recording.
You have to set the recorder to the AV input (signal source) to which the TV
set is connected.
Calling AV inputs in the AV selection:
AV
Call AV selection
AV selection
VCR
ꢀ
ꢀ
OK
AVS VGA/XGA HDMI/DVI
COMP. IN
VIDEO
DVD
Select AV device/socket (or VIDEO if the video recorder has
been connected only via the antenna socket) and use ...
OK
Then the station on the TV set is locked during the timer recording.
Digital Link must be switched on on the recorder. Read the operating
instructions of your Loewe recorder.Use only Euro-AV cables, which are
completely shielded, otherwise Digital Link/Digital Link Plus will not work.
Another advantage of Digital Link is that you can install the recorder in a
concealed place (e.g. in a rack). You can control the recorder with the TV
set.
If you have a Loewe recorder with both systems, you can use all the
advantages. The advantages of Digital Link Plus are used for the timer
recording; the advantages of Digital Link for concealed installation of the
recorder.
OK
to call.
Now you will see the playback from the connected AV device.
Calling AV input via the station list
Call the station list with the OK button in TV mode.
In the numeric and alphabetical sorting, you will always find the AV sockets
at the top of the list.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating additional equipment
Audio output “AUDIO DIGITAL OUT“
Assignment of digital audio inputs and
outputs
The digital audio signal is applied at the “AUDIO DIGITAL OUT” socket of
the TV. For example, you can connect an external digital audio amplifier or
the Loewe Auro system here.
Audio input “AUDIO DIGITAL IN”
The TV set has a coaxial digital audio input “AUDIO DIGITAL IN” and a
coaxial digital audio output “AUDIO DIGITAL OUT”. If you are using an
external digital surround amplifier for sound reproduction, you have to
feed digital audio signals to the TV, e.g. from the DVD player.
An analogue audio signal from the TV set or another sound source
which is received at one of the Euro-AV sockets of the TV set is con-
verted into a digital signal (PCM) and output at the “AUDIO DIGITAL
OUT“ socket. Conversion from external analogue AV sources to PCM
is not possible if the TV‘s loudspeakers are used as a centre channel. In
this case, connect your audio amplifier additionally to the TV (AUDIO
OUT L/R) with a cinch cable and switch the audio amplifier to ana-
logue audio input.
AUDIO DIGITAL
AV2
IN OUT
The digital TV sound or the digital sound of a connected auxiliary de-
vice is only audible via an external digital audio amplifier (e.g. Loewe
Auro system).
Surround Amplifier
DVD
MULTICHANNEL AUDIO OUT
I
PREOUT
LEFT CENTER
REAR
LEFT
FRONT
AUX-
I/O
AUX1 INAUX OUT A
FL
SL
C
FR
L
L
DIGITAL AUDIO
PCM/MPEG2/AC3/
STEREO OUT
VIDEO OUT
DIGITAL
IN
MAINS
II
DIGITAL
OUT
TO TV-I/O
SUB
SR
R
R
RIGHT SUBW. RIGHT
REAR FRONT
R
L
(CVBS)
VIDEO OUT
S-VID(EYO/C)
OUT
DIG OUT
OPT OUT
AUDIO
Connect the output socket of the DVD player (DIG OUT) to the TV‘s
“AUDIO DIGITAL IN” socket with a cinch cable.
In the connection wizard, specify that audio transmission is to be digital.
Specify that the digital sound is to be assigned for example to the Euro-AV
socket 2 to pass on the digital sound to the digital audio output of the TV
set and via this to the external audio amplifier. Further information about
this can be found on page 36.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating additional equipment
OUT” to the “DIGITAL IN” input of the Preceiver using a cinch cable.
Connect the TV socket “SERVICE“ to the TV-L-Link socket on the Preceiver
using the L-Link cable (provided with the Preceiver). Switch on the TV set
and the Preceiver. Via the L-Link, the TV recognises whether the Preceiver is
connected.
Select the “Tremo“ loudspeaker system in the DVD menu of the Preceiver,
set the listener/speaker distances and adjust the speaker levels. Please
consult the Preceiver manual.
Connecting Loewe DVD Preceiver Auro 2216
PS and Tremo loudspeaker system
You can play audio signals from the TV or DVD player in cinema quality
with these components. The Tremo system includes 5 speakers for the
front, centre and surround reproduction in addition to the subwoofer
illustrated below. The centre signal can be reproduced alternatively by the
TV speakers.
If you want to listen to the sound via the TV speakers temporarily, call the
Sound menu, select “Sound via“ and then “TV“. If you want to listen to the
sound via the Loewe Auro system, select “AURO“ under “Sound via“.
Connect the cubic socket on the DVD Preceiver to the “Master” cubic
socket on the subwoofer. Use the cubic plug cable enclosed with the DVD
Preceiver. Plug the white plug (without kink protection) into the cubic
socket on the subwoofer. For TV as a centre loudspeaker, connect “AUDIO
IN C” on the TV set to “PRE OUT C”on the DVD Preceiver using a cinch
cable. Connect the digital audio output of the TV set “AUDIO DIGITAL
Loewe LCD-TV
Tremo
ON
Power OUT
AV2-SCART
CENTER
R
L
DIGITAL OUT
Surr.
SERVICE
OFF
R
C
L
Front
Bass Intensity
Min.
0
Max.
Phase
Center to
Line IN
Sat
TV
180
Right Subw. Left
Surr.
Auro
Slave
Front
Right Center Left
PREOUT
C
AUX1 IN AUX OUT AUX 2
System connector
Master
L
R
L
L
TO TV
DIGITAL
IN
230V~50/60Hz
DIGITAL
OUT
TV
EXT
SL
LFE
SR
R
R
12V / 15mA
L-LINK
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating additional equipment
Select “Analogue“ for “Sound transmission“ for analogue audio amplifiers.
The sound for the analogue amplifier is transmitted via the AUDIO OUT L/R
connections of the TV to the audio amplifier. Connect the amplifier with
two cinch cables.
Specify under “Type of amplifier“ whether the analogue amplifier is a stereo
or surround amplifier.
If it is a surround amplifier, also specify whether or not the TV speakers
are to be used as centre loudspeakers. Connect the centre output of the
amplifier to the centre output of the TV using a cinch cable, if necessary.
Note: do not use the centre loudspeaker connection on the amplifier;
instead use the pre-amplifier centre output.
Connecting other audio amplifiers or active
speakers
In the connection wizard, select “HiFi/AV amplifier“ under “Equipment
selection: audio component“. The connection wizard allows configuration
of different audio amplifiers (stereo amplifiers, surround amplifiers,
analogue or digital) with different sound formats (Dolby Digital, dts, MPEG
and Stereo/PCM). Refer to the operating instructions for the audio amplifier
to be connected.
Select “Digital“ under “Audio transmission“ for digital audio amplifiers.
Connect the digital audio output of the TV AUDIO DIGITAL OUT to the
digital audio input of the digital amplifier.
Assign the digital audio input to the socket through which the
corresponding picture is transmitted (e.g. AV2 if a DVD player is connected
there). Then the digital sound is passed to the digital audio output of the
TV set and fed to the external audio amplifier via this.
AUDIO IN AUDIO OUT
C
L
R
Specify which sound formats can be decoded with your digital amplifier
(Dolby Digital, MPEG, dts).
Specify under “Type of amplifier“ whether the digital amplifier is a stereo or
surround amplifier.
If it is a surround amplifier, specify whether or not the TV loudspeakers
are to be used as centre loudspeakers. Connect the centre output of the
amplifier to the centre output of the TV using a cinch cable, if necessary.
Note: do not use the centre loudspeaker connection on the amplifier;
instead use the pre-amplifier centre output.
PRET
AUX1 INAUX OUT AUX
2
FL
SL
C
FR
L
L
DIGITAL
IN
DIGITAL
OUT
SUB
SR
R
R
If you want to listen to the sound over the TV loudspeakers temporarily, call
the Sound menu using the button, select “Sound via“ and then “TV“.
When connecting active speakers, select “Active speakers“ in the
connection wizard under “Equipment selection: audio component“.
The sound for the active speakers is transmitted via the AUDIO OUT
L/R connections to the active speakers. Make connections to the active
speakers using the cinch cables.
AUDIO IN
C
AUDIO DIGITAL
OUT
AV2
Make the audio settings on the TV set when active speakers are connected.
When using an external audio amplifier, make the audio settings on the
audio amplifier.
PRET
AUX1 INAUX OUT AUX
2
FL
SL
C
FR
L
L
DIGITAL
IN
DIGITAL
OUT
SUB
SR
R
R
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating additional equipment
HDMI (DVI) connection
VGA/XGA connection
The HDMI connection (High Definition Multimedia Interface)
allows digital picture and sound transmission via a connecting
cable, e.g. from Loewe DVD Recorder Centros 2102/2172 HD.
The digital picture and sound data are transmitted without
You can connect a PC or a Set Top Box (STB) and therefore
use the TV screen as an output device.
Connect the PC/STB to the VGA/XGA socket on the TV using
a VGA cable.
data compression and therefore lose none of their quality. In the equipment
connected, no analogue/digital conversion is necessary, which might also
have lead to losses in quality.
When connecting to a PC, first set one of the following screen resolutions
on your PC.
800x600 60Hz (SVGA)
DVI signals can be also be reproduced by the HDMI connection using a
DVI/HDMI adapter cable. This is possible because HDMI is based on DVI
and is downwardly compatible. That means that the digital video signals are
transmitted via HDMI - no audio signals are transmitted, though. In addition,
both use the same copy protection method HDCP.
1024x768 60Hz (XGA).
When a Set Top Box is connected, set the following screen resolutions
according to the options of the Set Top Box:
698x576i (PAL), 640x480i (NTSC), 720x480p (60 Hz)
720x480i, 720x 576i (SDTV – standard modi for STB) 720x576p (50 Hz)
1280x720p, 1920x1080i (HDTV modi)
Connect the set with an HDMI connection using an HDMI cable (type A,
19-pin) to the HDMI socket of the TV set. Log in the HDMI connection in the
connection wizard (TV menu - Connections - New devices/modifications).
Select the VGA/XGA connection in the AV selection.
Call AV selection
AV
AV selection
VGA/XGA
ꢀ
OK
ꢀ
Select the HDMI connection in the AV selection.
AVS
HDMI/DVI COMP. IN
VIDEO VCR
DVD
AV
Call AV selection
OK
Select VGA/XGA socket and use ...
to call.
AV selection
ꢀ
ꢀ
OK
HDMI/DVI
AV1
GA/XGA
COMP. IN
VIDEO
AVS
AV2
OK
OK
Select HDMI/DVI socket and use ...
to call.
Start the connected device.
OK
Set geometry
Call the TV menu using the MENU button, select “Geometry“ using ꢀꢁ
and set:
If the picture is not positioned correctly, you can move the picture
horizontally and vertically here so that it fills the whole screen. You can
also set the phase position so that the picture appears in the best possible
quality.
Start playback on the device connected with HDMI connection.
The set automatically recognises and sets the best possible format for the
video.
If transmission occurs via a DVI/HDMI adapter cable, then you can feed in
the appropriate analogue audio via the audio input sockets AUDIO IN L/R on
the TV set. The sound is reproduced via the TV speakers.
Setting colour standard
If you have connected a digital external audio amplifier, you can select the
digital audio signal in the connection wizard (TV menu - Connections - New
devices/modifications) and assign it to the HDMI/DVI socket. You can make
the other settings for the audio amplifier as described for digital amplifiers
on page 36. The digital audio signal of the DVI audio source is fed in at the
AUDIO DIGITAL IN socket on the TV. Feed the digital audio signal from the
TV AUDIO DIGITAL OUT to the amplifier.
Call the Picture menu using the
using ꢀꢁ and make your selection.
The colour standard for a connected PC is RGB.
In Set Top Boxes, you usually set Ycc as a colour standard. Other formats
such as Ypp or RGB can also be output. Please consult the operating
instructions of the device connected.
If the wrong standard is selected, you will recognise this by the wrong
colours in the display.
button. Select “Colour standard“
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating additional equipment
Sound from PC or Set Top Box
Component video connection
Feed the analogue audio signal from the PC or the STB to the sockets
AUDIO IN L/R on the TV via a cinch cable. The sound is reproduced via the
TV speakers.
If you have connected a digital external audio amplifier, you can select the
digital audio signal in the connection wizard (TV menu - Connections -
New devices/modifications) and assign it to the VGA/XGA socket. You
can make the other settings for the audio amplifier as described for digital
amplifiers on page 36. The digital audio signal of the Set Top Box is fed in
at the AUDIO DIGITAL IN socket on the TV. Feed the digital audio signal
from the TV AUDIO DIGITAL OUT to the amplifier.
If you have a DVD player/recorder with Component OUT
connections, you can connect it to the SD/HD-COMPONENT
IN sockets of the TV instead of to the Euro-AV sockets. The
connecting cable with three cinch plugs each transmits
picture information. The playback is of a better quality than via the Euro-AV
socket.
You need another cinch cable for the analogue sound transmission.
Connect the analogue audio outputs of the DVD player to the AUDIO IN
L/R sockets on the TV set. The sound is reproduced via the TV speakers.
If you want to use the digital sound of the DVD player with a digital audio
amplifier connected to the TV, make a connection between AUDIO DIG
OUT of the DVD player and AUDIO DIGITAL IN of the TV set.
Log in the component/device in the connection wizard:
Assign the AUDIO DIG IN input here to the COMP. IN socket, provided a
digital audio amplifier is also connected. You can make the other settings
for the audio amplifier as described for digital amplifiers on page 36.
Set the signal at the component input in the connection wizard: Set to
“Automatic“ first. If the signal is not reproduced when playback is started,
consult the operating instructions of the DVD device connected to find out
what screen resolution is possible (SDTV, HDTV or ProScan).
Select the component connection in the AV selection.
AV
Call AV selection
AV selection
COMP. IN
ꢀ
ꢀ
OK
DMI/DVI
VIDEO
DVD AVS VGA/XGA HDM
VCR
OK
Select COMP. IN sockets and use ...
to call.
OK
Start playback on the connected device.
Set geometry
Call the TV menu using the MENU button, select “Geometry“ using ꢀꢁ
and set:
If the picture is not positioned correctly, you can move the picture
horizontally and vertically here so that it fills the whole screen. You can
also set the phase position so that the picture appears in the best possible
quality.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating additional equipment
When operating in the VCR or DVD mode, the indicator above the VCR
or DVD button lights up. In DVD mode, the following DVD players can be
operated: Xemix 6122DO, 8122DA and 6222PS.
Operating Loewe video recorders and
Loewe DVD players directly
You can switch over the remote control of the TV set to operate Loewe
video recorders and Loewe DVD players. These devices can be operated
In VCR mode, the following VCRs can be operated: ViewVision 8106H,
8136H, 8176H, 6306H, 6336H, 6376H, 6396H, 4306H, 4376H, 2102M,
2302M, 4206, 4236, 4276.
directly.
Select the device to be operated:
For other Loewe equipment than that listed, please use the original remote
control.
press the VCR button, the indicator above lights for about
5 seconds.
VCR
press the DVD button, the indicator above lights for about
DVD
5 seconds.
TV
Switch back to TV operation: Push the TV button.
Functions for Loewe DVD players (Xemix 6122DO, 8122DA, 6222PS)
Functions for Loewe video recorders (VV 8106, 8136, 8176)
Switch DVD on /
Sound off/on (mute)
Operating VCRs
off on standby
Sound off/on (mute)
Operating VCRs
Switch recorder
on/off – in standby
Operating DVD players
Select chapter
Repeat
TV
SV
VCR
T-C
DVD
Operating the TV set
TV
SV
VCR
T-C
DVD
Operating the TV set
Operating DVD players
Select picture and sound source
Select video and audio input
Set marker
Display/close Timer list
Display/close
ShowView timer Menu
DISC-MENU
SP/LP
DISC-MENU
SP/LP
RADIO
000
Select camera position
Zoom
RADIO
000
Set time display to 0:00:00
User interface of
loaded DVD on
Switch to Long Play
Select Chapter;
in menu: enter digits
Select station directly
/in menu: enter digits
/Standard Play
abc
def
abc
def
ghi
jkl
mno
ghi
jkl
mno
pqrs
EPG
tuv
AV
wxyz
PIP
pqrs
EPG
tuv
AV
wxyz
PIP
Set picture format (TV)
Set picture format (TV)
Call AV selection (TV)
Call AV selection (TV)
DVD menu on;
in menu: back
Status display on;
Status display on/off
VCR menu on
/in menu: back
in menu: close menu
in the menu: Close menu
DVD menu on,
previous function activ;
in menu: info on/off
Status display on/off
P+
P+
Reverse play
/in menu: select/set
V–/V+ volume quieter/louder
on playback: Slow motion forward
/in the menu: select/set
or to the next menu
V–/V+ volume
quieter/louder
V–
V+
V–
V+
OK
OK
/
:
Title/Chapter Table;
in menu: call/confirm
Chapter up/down
in menu: select up/down
/
/
at stop: Program up/down
on playback: manual tracking
in the menu: Select position
Call up station list
/in menu: call up/confirm
P–
P–
Search back/forward
in menu: select left/right
Fast forward
Next chapter
Beginning of chapter or
previous chapter
/search back
Rewind
/search forwards
/search forward
/search backwards
Playback
Start playback
Start recording
Pause
Pause (still frame)
/frame-by-frame advance
Stop
Stop tape
/single frame, slow motion
39
Download from Www.Somanuals.com. All Manuals Search And Download.
What to do, if ...
Problem
Possible cause
Help
The “Recording” menu point is not displayed in
the TV menu.
No video or DVD recorder logged in.
Log in the video or DVD recorder in the
connection wizard and connect the device.
“Connections” cannot be called in the TV menu
(deactivated).
A time recording is in progress.
Wait until the timer recording has ended or delete
the timer.
The control of the Loewe video recorder and
the timer do not work or do not work properly.
a) The Digital Link function is not activated or not a) Activate Digital Link in the recorder (see
possible in the recorder.
operating instructions of the video recorder).
b) Connect the Euro-AV cable.
c) Login recorder.
b) Euro-AV cable is not connected.
c) Recorder is not logged in.
General problems with connecting external
equipment via an AV input.
a) The device is not logged in to the connection
wizard or is connected differently than is
shown in the connection diagram.
b) The AV standard is set incorrectly.
c) The AV signal is set incorrectly.
a) In the connection wizard (TV menu –
Connections – New devices/modifications),
compare the connection diagram with the
actual installation and connect as shown, if
necessary.
b) Set the standard correctly.
c) Set the AV signal correctly.
If “Automatic” is set for AV standard or AV signal,
this can lead to faults with signals which do not
conform to standard. Then the standard and the
signal are to be set according to the specifications
in the operating instructions of the external device.
A decoder connection does not function or is
faulty.
a) The signal is not decoded because the wrong
decoder stations are selected in the connection
wizard.
b) The sound is missing in decoder mode because
the wrong decoder sound is assigned in the
connection wizard.
a) Follow the instructions in the connection
wizard again (TV menu – Connections – New
devices/modifications) and select the
corresponding decoder station.
b) Follow the instructions in the connection
wizard again and select the right audio source
(decoder, TV or autom.), see instructions of the
decoder.
All menus appear in the wrong language.
Menu language has been set incorrectly.
Set your menu language:
Press the INFO button in TV mode (index). Select
the first index item and call it by using OK. Then
select the language and confirm with OK.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
What to do, if ...
Problem
Possible cause
Help
Digital Link Plus does not function.
a) Euro-AV cable is not fully wired (pin 10 not
wired).
a) Replace the Euro-AV cable.
b) Some recorders can only adopt stations during b) Restore the recorder to the as-delivered state
the initial installation of the TV set.
c) All or some of the terrestrial and cable stations
are stored on station storage locations ≥ 99.
(see recorder‘s operating instructions).
c) Rearrange the terrestrial and cable
programmes so that they fall between 1 and
99.
Various characters are displayed incorrectly in
the teletext.
The wrong character set is set in the teletext
menu.
Set the right character set: Teletext menu -
Settings - Character set: standard or the
appropriate character set.
No sound via external digital audio amplifier
a) The external digital audio amplifier does not
support the selected sound format (Dolby
Digital, dts, MPEG).
a) Set PCM stereo on the DVD player in the
sound selection. For DVB stations, switch
language/sound selection (green colour key)
to Stereo on the TV set in the status display
(END).
b) Connect Digital-Out from the TV set to a Digital-
In of the external digital audio amplifier and
select the appropriate input to this.
b) TV set and external digital audio amplifier are
not connected.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical data
General data
Type
Xelos A 26
–
65465x87
–
65465x27
Xelos A 32
65466x89
–
65466x47
65466x27
Xelos A 37
65467x89
–
65467x47
65467x27
Xelos A 42
–
65419 x87
65419x47
65419x27
Item no., Version DVB-T/C
Version DVB-T/C CI
Version DVB-T/C CI DR+ T/C
Version DVB-T CI UK
Set dimensions without stand
(ca. cm WxHxD)
Dimensions with stand (ca. cm WxHxD)
Set weight without stand (ca. kg)
Set weight with stand (ca. kg)
Display
Picture diagonal (cm)/picture format
Resolution
Contrast ratio
68.4x50.7x10.8
68.4x56.1x24.0
12.3
84.5x58.4x9.6
84.5x60.7x24.0
16.9
99.1x67.5x9.1
99.1x69.7x24.0
20.4
107.0x74.3x11.2
107.0x77.0x26.0
40.4
14.3
18.9
22.4
43.4
HD-LCD technology
66/16:9
1366x768
800:1
HD-LCD technology
80/16:9
1366x768
800:1
HD-LCD technology
94/16:9
1366x768
800:1
HD Plasma technology
106/16:9
1024x1024
3000:1
Luminance
1200 cd/m2
>170°
Angle of viewing horizontally/vertically
Power consumption (IEC 62087)
in operation (watt)
170°
170°
170°
65/70
< 3
80/85
< 3
95/100
< 3
typ. 300
< 3
in standby (watt)
Ambient temperature (Celsius)
Relative humidity (not condensing)
Barometric pressure
5º – 35º
20 – 80%
800 – 1114 hPa (0 – 2000 m over NN)
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical data
Connections
Jack 3.5mm
Electrical data
Chassis name
Headphones 32- 2000 ohm
L 2650
Mini-DIN (AVS) Video IN
Cinch (yellow) Video IN
Cinch (white/red) Audio IN
IEC socket 75 Ohm/5 V/80 mA
F socket 75 Ohm (213/18 V/350 mA
Y/C (S-VHS/Hi 8)
CVBS (VHS/8 mm)
Power supply
220 V -240V/50- 60 Hz
Tuner VHF/UHF/ cable
Hyperband 8 MHz
Station storage locations
TV standards
L/R
41 MHz to 860 MHz
430 / for DVB 1680
B/G, I, L, D/K, M, N
SECAM, PAL, NTSC,
NTSC-V, PAL-V (60Hz)
Mono/Stereo/Bilingual
Nicam B/G, I, L,
Virtual Dolby
Antenna/cable/analogue PIP(1/DVB-T/C
ANT-SAT
Y/C (S-VHS/Hi 8)
CVBS (VHS/8 mm)
CVBS (VHS/8 mm)
EURO-AV 1
Video IN
Colour standard
Video OUT
Sound standard
Y/C (S-VHS/Hi 8)
Audio IN
Audio OUT
Video IN
L/R
L/R
Rated audio power
Analogue Teletext
Page Memory
2 x 20 watt
TOP/FLOF Level 2.5
3000
EURO-AV 2
Y/C (S-VHS/Hi 8)
CVBS (VHS/8 mm)
RGB, YUV
Digital Teletext (in UK only)
MHEG-5
Video OUT
CVBS
Y/C, (only with SVHS Link Plus)
Audio IN
Audio OUT
L/R
L/R
Cinch
Audio IN max. 2Vrms
Audio IN
Audio OUT (level adjustable in active loudspeakers)
COMPONENT IN:
COMPONENT IN:
Centre
L/R
L/R
Cb/Pb signal
Cr/Pr signal
Y signal
2 x Cinch
2 x Cinch
Cinch
Cinch
Cinch
COMPONENT IN:
Cinch
Cinch
Digital Audio IN (SPDIF)
Digital Audio OUT (SPDIF)
Digital audio
Digital audio
HDMI/DVI
VGA/XGA
Mini-DIN
Digital Video/Audio IN type A 19pin Digital video and audio
VGA/XGA IN
PC/STB video signal
Service/L-Link
(1 Analogue PIP tuner can be retrofitted in Xelos A 32/37/42.
(2 Digital satellite tuner can be retrofitted,
twin sat tuner can be retrofitted for sets with digital recorder.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories
Wall holders and stands
Loewe Video Recorders
Refer to the notes on the installations options on page 9.
Loewe video recorders are specially adapted to Loewe TV sets in design,
user guidance and technical properties. They greatly simplify daily handling
of the equipment.
PIP tuner
The PIP tuner is intended for analogue terrestrial/cable reception.
You can retrofit either this PIP tuner or a digital satellite tuner.
Retrofitting not possible for Xelos A26 and TV sets in the UK.
Loewe order no. 89442.080
Loewe DVD players and recorders
The DVD players and recorders from Loewe are characterised by form
and colour which match Loewe TV sets, adapted user guidance and
technology. A combination of the two devices forms a system which offers
many advantages.
Digital Satellite Tuner
The digital satellite tuners are integrated in the TV set and are operated by
the remote control/menu control of the TV.
You can retrofit either this digital satellite tuner or a PIP tuner.
Retrofitting not possible for TV sets in the UK.
Loewe order no. 89361.055
Loewe audio system Auro and the active speaker system Tremo
The interplay of a Loewe TV with a Loewe audio system and a Loewe
speaker system creates an excellently coordinated Home Cinema system.
Advantages are high operating comfort, attractive design and adapted
technology.
DVB-S Twin sat tuner
If your TV set is already equipped with the digital recorder, you can have it
retrofitted with an integrated DVB-S twin sat tuner.
The built-in DVB-T/C PIP tuner will be exchanged with a DVB-S twin sat
tuner.
Loewe order no. 89443.080
Common Interface (CI)
If your TV set is already equipped for DVB-T/C reception, you can have it
retrofitted with the Common Interface (slot for CI module) (not for Xelos
A26 and Xelos A 42).
Loewe order no. 89346.080
Subject to delivery options.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Service addresses
Australia
France
Loewe France S.A.
13 rue du Dépôt, Parc del l‘Europe, BP 10010
F - 67014 Strasbourg Cédex
Tel. 00 33 - 3- 88 79 72 50
Fax 00 33 - 3- 88 79 72 59
Email [email protected]
Morocco
SOMARA S.A.
377, Rue Mustapha El Maani
MA–20000 Casablanca
Tel. 00 21 22 - 2 22 03 08
Fax 00 21 22 - 2 26 00 06
Email [email protected]
International Dynamics Australasia Pty Ltd.
129 Palmer Street
AUS - Richmond, Victoria 3121
Tel. 00 61 - 3-94 29 08 22
Fax 00 61 - 3- 94 29 08 33
Email [email protected]
Austria
Loewe Austria GmbH
Parkring 10
Germany
Norway
CableCom AS
Østre Kullerød 5
Loewe Opta GmbH, Customer Care Center
Industriestraße 11
A–1010 Wien
Tel 00 43 1 / 51 633 - 31 34
Fax 00 43 1 / 51 633 - 30 32
D–96317 Kronach
N–3214 Sandefjord
Tel. 00 47 - 33 48 33 48
Fax 00 47 33 44 60 44
Email [email protected]
Tel. 0049 1801–22256393
Fax 0049 9261–99500
Email [email protected]
Benelux
Loewe Opta Benelux NV/SA
Uilenbaan 84
B–2160 Antwerpen
Tel. 00 32 - 3- 2 70 99 30
Fax 00 32 - 3- 2 71 01 08
Email [email protected]
Greece
SOUND HELLAS S.A.
Kleanthous Str. 10
GR–54642 Thessaloniki
Tel. 00 30 - 2310 - 856 100
Fax 00 30 - 2310 - 856 300
Email [email protected]
Poland
DSV TRADING SA
Plac Kaszubski 8
PL–81-350 Gdynia
Tel. 00 48 58 - 6 61 28 00
Fax 00 48 58 - 6 61 44 70
Email [email protected]
CIS
Service Center Loewe
Petrovsky per., d. 5, str. 3 of. 17
RUS–107031 Moscow
Tel. 0 95 - 928 33 58
Fax 0 95 - 928 58 79
Email [email protected]
Hungary
Basys Magyarorszagi KFT
Epitok utja 2–4
Portugal
Vídeoacustica
Comercio e Representacoes de
Equipamentos Electronicos S.A.
Estrada Circunvalacao, Quinta do Paizinho, Arm. 5
P–2795-632 Carnaxide
Tel. 0 03 51 - 2 14 24 17 70
Fax 0 03 51 - 2 14 18 80 93
Email offi[email protected]
H–2040 Budaörs
Tel. 00 36 - 2341 56 37 (121)
Fax 00 36 23 41 51 82
Email [email protected]
Cyprus
HADJIKYRIAKOS & SONS LTD.
Prodromou 121, P.O Box 21587
CY–1511 Nicosia, Cyprus
Tel. 0 03 57 - 22 87 21 11
Fax 0 03 57 - 22 66 33 91
Email [email protected]
Israel
PL Trading (pz 2004) Ltd.
27, Aliat Hanoar St.
ISR - Givataiim 53401
Tel. 00 972 - 3 - 57 27 155
Fax 00 972 - 3 - 57 27 150
Email [email protected]
Slovenia
Jadran Trgovsko Podjetje
Partizanska cesta 69
SL–6210 Sezana
Tel. 0 03 86 - 57 31 04 40
Fax 0 03 86 - 57 31 04 42
Email [email protected]
Czech Republic
K+B EXPERT SPOL. S R.O.
U Expertu 91
CZ - 25069 Klicany u Prahy
Tel: 0 04 20 - 2 72 12 21 11 (222)
Fax: 0 04 20 - 2 72 12 21 99 (239)
Email [email protected]
Italy
Loewe Italiana SRL
Lago del Perlar, 12
I–37135 Verona
Tel. 00 39 - 045 82 51 611
Fax 00 39 - 045 82 51 622
Email [email protected]
South Africa
THE SOUNDLAB PTY LTD
P.O. Box 31952, Kylami 1684
Republic of South Africa
Tel. 00 27 - 1 14 66 47 00
Fax 00 27 - 1 14 66 42 85
Email [email protected]
Denmark
Kjaerulff 1 A/S
C.F.Tietgens Boulevard 19
DK–5220 Odense SØ
Tel.00 45 - 66 13 54 80
Fax 00 45 - 66 13 54 10
Email [email protected]
Malta
Mirage Holdings Ltd
Flamingo Complex, Cannon Road
M–Qormi
Tel. 0 03 56 22 - 79 40 00
Fax 0 03 56 21 - 44 59 83
Email s.martinelli@flamingo.com.mt
Spain/Canary Islands
Gaplasa S.A.
Conde de Torroja, 25
E–28022 Madrid
Tel. 0 03 49 - 17 48 29 60
Fax 0 03 49 - 13 29 16 75
Email [email protected]
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Service addresses
Sweden
Canseda AB
Amalia Jönssons Gata 19
SE - 42131 Västra Frölunda
Tel. 00 46 - 3 17 09 37 60
Fax 00 46 - 31 47 65 15
Email [email protected]
Switzerland
Telion AG
Rütistrasse 26
CH-8952 Schlieren
Tel. 00 41 - 17 32 15 11
Fax 00 41 17 30 15 02
Email [email protected]
Turkey
Enkay Elektronik Servis Müdürlügü
Alemdag Cad: Site Yolu No.: 10
Ümraniye/ Istanbul
Tel. 00 90 - 216 634 44 44
Fax 00 90 - 216 643 39 88
Email [email protected]
UK
LinnSight Ltd.
PO Box 8465
UK – KA 7 2YF Prestwick
Tel. 00 44 - 12 92 - 47 15 57
Fax 00 44 - 12 92 - 47 15 54
Email [email protected]
Printed in Germany
1/06.05/5,0
Subject to modifications.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
|