L K 8 5 / 1 4 0
S T E R E O P O W E R A M P L I F I E R
O W N E R ' S M A N U A L
Download from Www.Somanuals.com. All Manuals Search And Download.
Important safety information
Explanation of symbols used in this manual and on the product:
This symbol is intended to alert the user to the presence of
uninsulated dangerous voltages within the enclosure of sufficient
magnitude to cause electric shock.
This symbol is intended to alert the user to the presence of
important maintenance and servicing information in the instruction
and service manuals.
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE THE
COVER.
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
i
WARNING: SHOCK HAZARD. DO NOT OPEN.
AVIS: RISQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR.
CAUTION: REPLACE FUSE WITH SAME TYPE AND RATING.
ATTENTION: UTILISER UN FUSIBLE DE RECHANGE DE MÊME TYPE.
DISCONNECT SUPPLY CORD BEFORE CHANGING FUSE.
ATTENTION: DEBRANCHER AVANT DE REMPLACER LE FUSIBLE.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
MAINS PLUGS
This appliance is supplied with a non-rewireable mains plug for the
intended country.
Replacement mains leads can be obtained from your Linn retailer.
Should you need to change the plug please dispose of it carefully.
A plug with bared conductors is dangerous if engaged in a live socket.
The Brown wire must be connected to the Live (Line) supply pin.
The Blue wire must be connected to the Neutral supply pin.
The Green/Yellow wire must be connected to the Earth (Ground) supply
pin.
Please contact your retailer or a competent electrician if you are in any
doubt.
Download from Www.Somanuals.com. All Manuals Search And Download.
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
UK USERS PLEASE READ THIS IMPORTANT SAFETY
INFORMATION
Fuse replacement
This appliance is fitted with a non-rewireable 13 Amp mains plug. The plug
contains a 5 Amp fuse. If the fuse has blown it can be replaced as follows:
a) Pull out the red fuse cover/carrier.
b) Remove and dispose of the blown fuse.
c) Fit a new 5 Amp BS1362 approved fuse into the carrier and push the
carrier back into the plug.
Always ensure the fuse cover is fitted. If the fuse cover is missing do not
use the plug. Contact your Linn retailer to obtain a replacement fuse cover.
Fuses are for fire protection and do not protect against electric shock.
Mains plug replacement
Should your mains plug need replacing and you are competent to do this
proceed as follows. If you are in doubt contact your Linn retailer or a
competent electrician.
a) Disconnect the plug from the mains supply.
b) Cut off the plug and dispose of it safely. A plug with bared conductors
is dangerous if engaged in a live socket.
c) Only fit a 13 Amp BS1363A approved plug with a 5 Amp fuse.
d) The cable wire colours or a letter will be marked at the connection
points of most quality plugs.
iii
Attach the wires securely to their respective points. The Brown wire
must go to the Live pin, the Blue wire must go to the Neutral pin, and
the Green/Yellow wire must go to the Earth pin.
e) Before replacing the plug top ensure that the cable restraint is holding
the outer sheath of the cable firmly and that the wires are correctly
connected.
WARNING
THIS APPLIANCE MUST BE EARTHED.
Replacing the fuse
Should the mains fuse blow replace it only with an equivalent part. The fuse
holder is located just below the mains inlet socket. To replace the fuse
disconnect the product from the mains supply. Using a flat blade
screwdriver remove and replace the fuse. If the fuse blows a second time
there is a fault in the product. Contact your local retailer.
Fuse ratings. See specifications section.
Mains voltage operating range. See specifications section.
Warning!! The power supply may be destroyed if a unit
designed for 115V is connected to 230V.
Download from Www.Somanuals.com. All Manuals Search And Download.
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Introduction ........................................ 1
The LK85/140 and music ........................................ 2
Setting up the LK85/140 ........................................ 5
Unpacking ........................................ 5
Positioning ........................................ 6
Connecting ........................................ 7
Operation ........................................ 8
Protection ........................................ 9
Guarantee and service ........................................ 10
Technical information ........................................ 11
Specifications ........................................ 11
v
Index ........................................ 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright and acknowledgements
Copyright © Linn Products Limited.
Linn Products Limited, Floors Road, Waterfoot, Glasgow, G76 0EP, Scotland, United
Kingdom.
All rights reserved. No part of this publication may be reproduced, stored in a
retrieval system, or transmitted, in any form or by any means, electronic,
mechanical, photocopying, recording, or otherwise, without the prior written
permission of the publisher.
Printed in the United Kingdom.
LK85 and LK140 are trademarks of Linn Products Limited.
vi
The information in this manual is furnished for informational use only, is subject to
change without notice, and should not be construed as a commitment by Linn
Products Limited. Linn Products Limited assumes no responsibility or liability for any
errors or inaccuracies that may appear in this manual.
Part no: PACK 326
This manual was produced by Human-Computer Interface Ltd, Cambridge,
England.
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
We believe that good music is not a luxury, but a necessity, and we
at Linn have dedicated the better part of two decades to making
sure that our customers are given the best possible experience of
the music they love. In other words, we take music seriously, which
is why we dedicate ourselves to building hi-fi which sets the highest
possible standards in bringing music to life within your home.
Listening to your new
Linn hi-fi should be the
nearest you can get to
being at a superb live
performance.
Listening to your new Linn hi-fi system should be the nearest you
can get to being at a superb live performance. By making the
LK85/140 Stereo Power Amplifier the building block of your Linn
hi-fi system, you bring that superb live performance into your
home. Once up and running the amplifier will bring you an
unrivalled listening experience that we know you’ll enjoy again and
again.
1
To do that, you need to know exactly how to get the best out of
your Linn amplifier, and that is what this manual is all about. In the
next few pages you will find out everything you need to know
about how to set up the LK85/140, and how to use it to get the
best possible results.
Download from Www.Somanuals.com. All Manuals Search And Download.
The LK85/140 and music
The LK85 and LK140 are rugged high output amplifiers
designed for ease of use and purity of sound.
You can build exactly the system you want, using
one or more LK85/140 amplifiers. The LK85 gives
85W per channel into 4ꢀ, or 62W per channel
into 8ꢀ, and so is ideal for most average-sized
rooms. Alternatively, additional power is available
LINN LK140
from the LK140, which gives 140W per channel
into 4ꢀ, or 95W per channel into 8ꢀ.
The LK85/140 comes in a durable compact case built to last, and
easy to stack on other Linn products. The amplifier has been
designed to power up automatically when it detects the presence
of an audio signal and power down into standby mode when there
is no signal. This enables it to be left on with minimum power
consumption. An indicator light on the front panel remains red
when the amplifier is in standby and green when it is powered up,
telling you at a glance the operational status of the amplifier.
2
If the LK85/140 is not going to be used for a long period of time,
we recommend that it is switched off using the front panel mains
switch.
The LK85/140 comes with full protection against power overload
and overheating, automatically shutting down to prevent damage
to itself or other Linn equipment, and powering back up when it is
safe to do so.
Download from Www.Somanuals.com. All Manuals Search And Download.
The LK85/140 is direct-coupled and servo-controlled to produce
the clearest sound and the toroidal transformer is fully shielded to
prevent hum when the amplifier is stacked with other products.
The LK85/140 provides two input sockets to make it easy to daisy
chain multi-amplifier systems, allowing you to boost the output
power of your system, or take advantage or bi-amping and
tri-amping.
Loudspeakers can be bi-wired to the LK85/140 by the use of the
two loudspeaker sockets to obtain even higher sound quality.
Bi-wiring involves making separate connections to the treble and
midrange/bass units on a loudspeaker. Keeping the treble and
midrange/bass signals separate improves the performance of the
loudspeakers by reducing the coupling between the signals.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
For more performance, you can use two or three LK85/140s to
bi-amp or tri-amp to the loudspeakers, each amplifier driving the
bass, midrange, and treble signals separately.
4
When bi-amping or tri-amping the highest possible performance
can be obtained by removing the passive crossover units from the
loudspeaker and fitting active crossover modules to the LK85/140
to accurately divide the signal into the appropriate frequency
bands. This is known as active playback.
The LK85/140 is designed to be easy to convert to active playback.
A complete range of stereo active crossover modules is available
for all current Linn loudspeakers. Your retailer can fit these and
make the necessary changes to your loudspeakers to transform
your system to fully active.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the LK85/140
This chapter explains how to unpack your Linn LK85/140 Stereo
Power Amplifier, and how to install it with your other hi-fi
components.
Unpacking
Before connecting the LK85/140 to the mains supply, you should
check the following:
• that everything is in the box
• that the correct voltage has been selected
• that the correct fuse has been fitted.
5
Accessories
The LK85/140 comes in a box with the following accessories:
• a mains lead
• two phono to phono leads
• two fuses for your local voltage (as defined on page 6)
• two red speaker plugs
• two black speaker plugs
• this manual.
We recommend you retain the packaging in case you need to
transport the amplifier at a later date.
Input
The LK85 and LK140 are factory-set for your local voltage, and
fitted with the appropriate fuse.
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the fuse
To replace the fuse, first identify the correct fuse for your local
voltage. This should be:
• 3.15A anti-surge for 230V
• 6.3A anti-surge for 115V
• 6.3A anti-surge for 100V (Japanese version).
Pull open the fuse drawer at the bottom of the mains inlet, insert
the fuse in the rear compartment, and close the drawer.
Earthing the LK85/140
The earthed moulded mains lead supplied must always be used
with the LK85/140. Never use an unearthed plug or adaptor.
6
Positioning
You can position the LK85/140 almost anywhere you find
convenient, but the following considerations may be useful.
The LK85/140 is a powerful amplifier and can generate several
hundred Watts of heat under extreme use. In cases of overloading
or overheating the amplifier will automatically shut down. No
damage will result if it does so.
Always ensure there is plenty of air circulation around the amplifier,
especially if stacked with other Linn products or stored in a
cupboard. If your amplifier does shut down, try increasing the
ventilation around the unit and, if necessary, move it to a more
suitable location if it keeps shutting down.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting
The following diagram shows the connections for the rear panel of
the LK85/140:
RIGHT SPEAKER
OUTPUTS
LINE
LEFT SPEAKER
OUTPUTS
LINE
MAINS INPUT
INPUTS OUTPUTS
SIGNAL DETECTOR
SENSITIVITY
VOLTAGE
SELECTOR
Connecting the mains supply
7
Connect the LK85/140 to a mains supply using the mains cord
supplied.
Note that the LK85/140 should be switched off before connecting
or disconnecting the plug on the rear panel, or you may generate
surges which could damage other components in your hi-fi system.
Connecting the audio input
The LK85/140 provides two audio input sockets, to allow amplifiers
to be daisy-chained. Connect the phono cable from your source.
This may be a pre-amplifier, multi-room system, or some similar hi-fi
component.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the speakers
The LK85/140 comes equipped with two pairs of speaker output
sockets to allow bi-wiring. Alternatively, auxiliary speakers may be
connected.
Operation
To turn on the LK85/140 amplifier, press the power switch on the
front panel.
Signal detector sensitivity
The LK85/140 uses signal sense circuitry to detect the presence of
an audio input signal. As soon as the amplifier detects the
presence of an audio signal, it will power up and a small indicator
light adjacent to the power switch will light green. Whenever an
audio signal is removed, the amplifier powers down to standby
mode after a short delay until it again detects an audio signal. The
small indicator light will turn red when the amplifier switches to
standby mode.
8
Adjusting the signal detector
The LK85/140 is shipped with signal sense circuity set to maximum
sensitivity for normal operation. However, if you find that
interference or other audio noises in your system cause the
amplifier to power up, you may wish to decrease the sensitivity of
the signal detector. To do this turn the signal detector sensitivity
control on the back panel anticlockwise towards the minimum
position.
Download from Www.Somanuals.com. All Manuals Search And Download.
By-passing the signal detector
Depending on its configuration, the LK85/140 will remain on
standby for 10 or 20 minutes after an input signal has been
removed. You can override this facility by fitting an internal link
which forces the amplifier to remain on as long as the mains power
is connected. Please consult your Linn retailer for further details.
Protection
Like all Linn products, the LK85/140 is a rugged amplifier, designed
and built to withstand most eventualities. To ensure safe operation,
the amplifier automatically shuts down in conditions of extreme
heat or power overloading.
If the amplifier overheats it will power down and the indicator light
on the front panel will turn red until the temperature has fallen to
safe operating levels, usually after about 30 seconds. The amplifier
has been designed to withstand temperatures of up to 70°C.
9
If the amplifier continually overheats try increasing the ventilation
around the unit. Refer to the section Positioning, page 6.
Consult your Linn retailer if any problems persist.
Download from Www.Somanuals.com. All Manuals Search And Download.
Guarantee and service
This product is guaranteed under the conditions which apply in the
country of purchase.
In addition to any statutory rights the customer may have, we
undertake to replace any parts which have failed due to faulty
manufacture. To help us, please ask your Linn retailer about the
Linn warranty scheme in operation in your country.
In the UK and other markets, extended warranty is offered to
customers who register their purchase with Linn. A registration card
can be obtained from your Linn retailer and should be stamped by
them. This will also enable you to receive the Linn RECORD
newsletter and details of hi-fi and music available from Linn.
10
Warning
Refer all enquiries to authorised Linn retailers only. Unauthorised
servicing or dismantling of the product invalidates the
manufacturer’s warranty.
If you are in any doubt, please contact your nearest Linn retailer.
For information on your nearest Linn retailer, contact the Linn
factory in Scotland or your national distributor.
Important
1 Please keep a copy of the sales receipt to establish the purchase
date of the product.
2 Please ensure that your equipment is insured by you during any
transit or shipment for repair.
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical information
Specifications
Output power
(230 Vac mains)
62W per channel into 8ꢀ, 85W per channel into
4ꢀ (LK85)
95W per channel into 8ꢀ, 140W per channel
into 4ꢀ (LK140)
Input signal for
685mV rms (LK85)
870mV rms (LK140)
maximum output
Maximum output
voltage
18.5V rms (LK85)
23.5V rms (LK140)
Gain
x27 (28.6dB)
Input impedance
10Kꢀ
Frequency response
Output offset
(-3dB) 10Hz–70kHz
<5mV
11
Signal sense threshold >150μV rms
Standby power
consumption
<5W
Maximum input power 350W (LK85)
570W (LK140)
Fuse rating
115V: T6.3A
230V: T3.15A
100V model: T6.3A
Safety approvals
EN60065 (Europe), UL6500 (USA),
CSA-E65-94 (Canada)
EMC approval to European standards
Size
320mm x 325mm x 80mm
(12.6" x 12.8" x 3.1") (W x D x H)
Weight
7Kg (15.4lb)
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
A
L
acknowledgements vi
active crossover modules 4
active playback 4
audio input, connecting 7
LK85/140 and music 2
M
mains plugs i
mains supply, connecting 7
B
bi-amping 4
bi-wiring 3, 8
O
operation 8
overheating 6, 9
overloading 6
C
connections 7
audio input 7
mains supply 7
speakers 8
copyright vi
P
13
positioning 6
protection 2, 9
R
F
replacing the fuse iii
fuse ratings 6
fuse replacement iii, 6
S
safety instructions i, ii
service 10
G
guarantee 10
setting up 5
signal detector
adjusting 8
I
indicator light 2, 8
green 8
by-passing 9
sensitivity 8
red 8
speakers, connecting 8
specifications 11
standby mode 2, 8
introduction 1
Download from Www.Somanuals.com. All Manuals Search And Download.
T
U
technical information 11
temperature, maximum 9
tri-amping 4
unpacking 5
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
L K 8 5 / 1 4 0
S T E R E O P O W E R A M P L I F I E R
PACK 326/1
Download from Www.Somanuals.com. All Manuals Search And Download.
|