USER GUIDE
BUSINESS SERIES
Wireless-G
Access Point with
Power Over Ethernet
Model: WAP2000
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Network Topology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Roaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Network Layout. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Example of a Simple Wireless Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Front Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Back Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Side Panels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Wall-Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Connecting the Access Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Accessing the Web-Based Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Web-Based Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Setup > Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Setup > Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Wireless > Basic Wireless Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Wireless > Wireless Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Wireless > VLAN & QoS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
AP Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Administration > Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Administration > Reboot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Status > Local Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Status > Wireless . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
General Network Security Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Additional Security Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
i
Wireless-G Access Point with Power Over Ethernet
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
FCC Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
FCC Radiation Exposure Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Safety Notices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Industry Canada Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Avis d’Industrie Canada. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Wireless Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Electric and Electronic Equipment (WEEE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
ii
Wireless-G Access Point with Power Over Ethernet
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Chapter ꢀ
Chapter ꢀ:
Introduction
Thank you for choosing the Wireless-G Access Point with
Power Over Ethernet.
The Wireless-G Access Point with Power Over Ethernet
is ideal for small businesses that want to expand their
existing wired networks or create new wireless networks
for the workforce or guests. The Access Point features
RangeBooster technology that is compatible with
standard 802.11g but with a range up to two times further
and throughput up to 35% faster. Unlike ordinary wireless
technologies that are hampered by wireless signals that
reflect off walls, ceilings, and other objects, RangeBooster
usesthesemultiplesignalswithtwosmartreceiversateach
end (router or access point and client adapter) to boost
range and throughput speeds. As a result, a RangeBooster
solution reduces or eliminates wireless signal dead spots
in offices and other buildings so users can connect to the
network in more areas. The Access Point comes with two 3
dBi antennas for increased power, also helping to extend
the range of the Access Point.
Advanced security features like Wi-Fi Protected Access™
(WPA2 Enterprise), make this solution ideal for business.
Integrated Quality of Service (QoS) features provide
consistent voice and video quality on both the wired
and wireless networks, enabling your workforce to
communicate or view video content without disruptions
and delay.
The Wireless-G Access Point with Power Over Ethernet can
be powered from its included AC adapter or from a Power
over Ethernet (PoE) Switch via Ethernet cabling, enabling
mounting in ceilings or high on walls where power outlets
may not be available.
Additional features like Multiple BSSIDs,Wireless Roaming,
Auto-Channel Selection, and Load Balancing give your
business added flexibility to keep employees and guests
connected. The Access Point also features dual firmware
images so it remains functional if a firmware upgrade
process is disrupted.
The Wireless-G Access Point with Power Over Ethernet is
Linksys One Ready. That means it includes the necessary
firmware for seamless integration into a Linksys One data
or data/voice network. Once connected, a Linksys One
Service Router will discover the Access Point, automatically
configure it and make it available to other users on the
network. Linksys One technology is automatic and self-
configuring.
ꢀ
Wireless-G Access Point with Power Over Ethernet
Download from Www.Somanuals.com. All Manuals Search And Download.
Planning Your Wireless Network
Chapter ꢁ
Network Layout
Chapter ꢁ:
The Access Point has been designed for use with 802.11g
and 802.11b products, such as the Notebook Adapters for
your laptop computers, PCI Adapters for your desktop PCs,
and USB Adapters for either a laptop or desktop. These
wireless products can also communicate with a 802.11g
or 802.11b Wireless Print Server.
Planning Your Wireless
Network
Network Topology
To link your wired network with your wireless network,
connect the Access Point’s Ethernet network port to any
switch or router.
A wireless network is a group of computers, each equipped
with one or more wireless adapters. Computers in a
wireless network must be configured to share the same
radio channel to talk to each other. Several PCs equipped
with wireless cards or adapters can communicate with
each other to form an ad-hoc network without the use of
an access point.
Example of a Simple Wireless Network
Broadband
Modem
Switch or
Router
Internet
Wired Clients
Linksys wireless adapters also provide access to a wired
network when using an access point or wireless router.
An integrated wireless and wired network is called an
infrastructurenetwork.EachwirelessPCinaninfrastructure
network can talk to any computer in a wired or wireless
network via the access point or wireless router.
An infrastructure configuration extends the accessibility
of a wireless PC to a wired network, and may double the
effective wireless transmission range for two wireless
adapter PCs. Since an access point is able to forward data
within a network, the effective transmission range in an
infrastructure network may be doubled (depending on
antenna characteristics).
WAP2000
Wireless Access Point
Roaming
Infrastructure mode also supports roaming capabilities
for mobile users. Roaming means that you can move your
wireless PC within your network and the access points will
pick up the wireless PC’s signal, providing that they both
share the same wireless security and SSID.
Wireless Clients
Example of Simple Wireless Network
The above diagram shows a typical infrastructure wireless
network setup. The Wireless Access Point connects to a
Linksys switch that provides power to the Access Point.
The Access Point can connect multiple wireless devices
to the network. This network will provide connectivity
among wireless network devices and PCs that have a wired
connection to the switch. The switch then can connect to
a router that can connect to an ISP for Internet access.
Before you consider roaming, choose a feasible radio
channel and optimum access point position. Proper access
point positioning combined with a clear radio signal will
greatly enhance performance.
NOTE: Spanning Tree Protocol should be
disabled on the switches connecting to the APs
to allow roaming to work without disruption.
ꢁ
Wireless-G Access Point with Power Over Ethernet
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Overview
Chapter ꢂ
Reset There are two ways to reset the Access
Point’s factory defaults. Either press the Reset
button for more than ten seconds, or restore
the defaults using the Access Point’s web-based
utility. If you press the reset button for less
than ten seconds, the Access Point will simply
reboot.
Chapter ꢂ:
Product Overview
Front Panel
The front panel is where the Access Point’s LEDs are
located. The LEDs display information about network
activity and connectivity.
If you power on the Access Point while holding
down the reset button, the Access Point will
be configured with a default static IP address
of ꢀ9ꢁ.ꢀ68.ꢀ.ꢁ45, see “Chapter 5: Advanced
Configuration” for details.
IMPORTANT: Resetting the Access Point will
erase all of your settings (including wireless,
security, and IP configuration) and replace them
with the factory defaults. Do not reset the Access
Point if you want to retain these settings.
Front Panel
Power (Green) The Power LED lights up when
the Access Point is powered on.
Ethernet The Ethernet network port connects
to Ethernet network devices, such as a switch or
router. The Access Point can be powered using
Power over Ethernet.
PoE (Green) The PoE LED lights up when the
Access Point is powered through Ethernet
cable.
Wireless (Green) The Wireless LED lights up
when the wireless module is active on the
Access Point. If the Wireless LED is flashing, the
Access Point is actively sending or receiving
data from a wireless device.
Power ThePowerportconnectstothesupplied
power adapter. Use this option if your switch or
router doesn’t support Power over Ethernet.
Ethernet (Green) The Ethernet LED lights up
when the Access Point is successfully connected
to a device through the Ethernet network port.
If the Ethernet LED is flashing, the Access Point
is actively sending to or receiving data from one
of the devices over the Ethernet network port.
Side Panels
Security slots are located on both side panels of the Access
Point.
Back Panel
The back panel is where the power, Ethernet, and antennas
are connected to the Access Point.
Back Panel
Side Panel
Antenna Ports The Access Point has two
antenna ports for connecting detachable 3
dBi omnidirectional antennas. Adjust the two
antennas so that they form a 90 degree angle
for best MIMO range performance.
Security Slots The security slots can be utilized
to attach a lock to the Access Point.
ꢂ
Wireless-G Access Point with Power Over Ethernet
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Chapter 4
Chapter 4:
Installation
Placement
The Access Point can be placed horizontally on a flat
surface such as a desktop so it sits on its four rubber feet
or it can be mounted on a wall.
Horizontal Mounting
NOTE: The Access Point should be oriented as
shown above for horizontal mounting.
Desktop Placement
Wall-Mount
The unit has two sets of wall-mount slots so that it can be
mounted either vertically or horizontally.
You will need 2 suitable screws to mount the Access
Point.
Suggested Mounting Hardware
4-5 mm
1-2 mm
Vertical Mounting
NOTE: Linksys is not responsible for damages
incurred by insecure wall-mounting hardware.
NOTE: The Access Point should be oriented as
shown above for vertical mounting.
1. Determine where you want to mount the Access Point.
Ensure that the wall you use is smooth, flat, dry and
sturdy and make sure the location is within reach of
the power outlet.
3. Insert a screw into each hole, and leave 3 mm of its
head exposed.
4. Maneuver the Access Point so the wall-mount slots
line up with the two screws.
2. Drill two holes into the wall for either vertical or
horizontal placement.
5. Place the wall-mount slots over the screws and slide
the Access Point down until the screws fit snugly into
the wall-mount slots.
NOTE: The printed Quick Installation Guide
that accompanies the Access Point includes
templates that can be used for spacing
between holes.
4
Wireless-G Access Point with Power Over Ethernet
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Chapter 4
5. If you are not using PoE (Power over Ethernet), then
connect the included power adapter to the Access
Point’s Power port. Then plug the power adapter into
an electrical outlet. The LEDs on the front panel will
light up as soon as the Access Point powers on.
Connecting the Access Point
1. Connect the antennas to the antenna connectors on
the Access Point.
Connect the Antennas
2. Adjust the two antennas so that they form a 90 degree
angle for best performance.
Connect the Power
Installation is complete. For advanced configuration
information, proceed to the next chapter.
Adjust the Antennas
3. Connect your Ethernet network cable to your network
router or switch.
LINK/ACT
PoE
LINK/ACT
PoE
LINK/ACT
Gigabit
LINK/ACT
Gigabit
Connect the Ethernet cable to the Router or Switch
4. Connect the other end of the network cable to the
Access Point’s Ethernet port.
Connect the Ethernet cable to the Access Point
NOTE: If your router or switch provides Power
over Ethernet, then step 5 is not necessary.
5
Wireless-G Access Point with Power Over Ethernet
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Configuration
Chapter 5
Setup > Setup
This screen is used to enter names for the Access Point and
configure the IP settings.
Chapter 5:
Advanced Configuration
The Access Point has DHCP enabled by default and should
receive an IP address automatically from the DHCP server
on your network.
If your network doesn’t have a DHCP server, a static IP
address (ꢀ9ꢁ.ꢀ68.ꢀ.ꢁ45) can be assigned to the Access
Point by performing the following steps:
1. Disconnect the power to the unit.
2. Using a straightened paper clip or similar object to
hold down the reset button on the back panel of the
Access Point.
3. Keep the reset button held down and reconnect the
power to the unit. The reset button should be held
until the WLAN LED lights up.
Setup > Basic Setup
Host Name This is the host name assigned to the Access
Point. This host name will be published to your DNS server
if the Access Point is configured to acquire the IP address
through DHCP. In that case, Linksys recommends to follow
the company policy on the host name assignment. The
default name is Linksys.
Accessing the Web-Based Utility
1. Open your web browser and enter the IP address of
your Access Point into the Address field and press the
Enter key. The Password screen will appear.
Device Name You may assign any device name to
the Access Point. This name is only used by the Access
Point administrator for identification purposes. Unique,
memorable names are helpful, especially if you are
employing multiple access points on the same network.
Address Field
2. The first time you open the web-based utility, enter
admin (the default user name) in the User name field
and enter it again in the Password field. Click the OK
button. You can change the Access Point’s password
later from the Administration > Management screen.
Contact Use this field to specify the contact string for
your SNMP agent.
Location Use this field to specify the location string for
your SNMP agent.
Automatic Configuration - DHCP Selected by default,
this option is used if you have a DHCP server enabled on
the LAN and want it to assign an IP address to the Access
Point.
Static IP Address This option is used to assign a static or
fixed IP address to the Access Point.
Login Screen
Web-Based Utility
The first screen that appears is the Setup screen. This
allows you to change the Access Point’s general settings.
There are options on the left side of the screen: Setup,
Wireless, AP Mode, Administration, and Status. Each
option contains screens that will help you configure and
manage the Access Point.
6
Wireless-G Access Point with Power Over Ethernet
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Configuration
Chapter 5
Current Time Displays the current time setting.
Manually Select this option to set the date and time
manually.
•
Date When the time is manually configured, this field
is used to select the current date from the pull-down
menus.
•
Time When the time is manually configured, this field
is used to enter the time. The time is enter in a 24 hour
format (hour : minutes : seconds).
NTP Select this option if you want the Access Point to
contact a public time server to get the current time.
•
•
Time Zone When NTP is enabled, the appropriate
time zone must be selected.
Setup > Basic Setup with Static IP
•
•
LocalIPAddress TheIPaddressmustbeuniquetoyour
network. The default IP address is ꢀ9ꢁ.ꢀ68.ꢀ.ꢁ45.
Automatically adjust clock for daylight saving
changes Select this option if you are in using the
Access Point in a location that observes daylight saving
time.
Subnet Mask The subnet mask must be the same as
the LAN that your Access Point is connected to. The
default is ꢁ55.ꢁ55.ꢁ55.0.
User Defined NTP Server Enable this option if you have
set up a local NTP server. Default is Disabled.
•
•
Default Gateway Enter the default gateway address,
typically this is the IP address of your router.
NTP Server IP Enter the IP address of user defined
NTP Server.
Primary DNS (Required) and Secondary DNS
(Optional) Your ISP will provide you with at least one
DNS (Domain Name System) Server IP address.
Change these settings as described here and click Apply
to save your changes. Help information is available on the
right side of the screen.
Change these settings as described here and click Apply
to save your changes. Help information is available on the
right side of the screen.
Wireless > Basic Wireless Settings
Change the basic wireless network settings on this screen.
The Access Point can connect to up to four wireless
networks (SSIDs) at the same time, so this screen offers
settings for up to four different SSIDs.
Setup > Time
This screen allows you to change the Access Point’s time
settings.Thecorrecttimesettingcanhelptheadministrator
to search the system log to identify problems.
Wireless > Basic Wireless Settings
Setup > Time
Wireless Network Mode Select one of the following
modes. The default is Mixed.
You can set the time either manually or use the NTP
option to automatically set the time from a time server if
the Access Point can access the public Internet. NTP is the
default setting.
•
Disable This option disables wireless connectivity
completely. This is useful during system maintenance.
ꢃ
Wireless-G Access Point with Power Over Ethernet
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Configuration
Chapter 5
•
•
B-Only This option is used when all wireless client
devices connect to the Access Point at Wireless-B data
rates (maximum speed of 11 Mbps).
G-Only This option is used when all wireless client
devices connect to the Access Point at Wireless-G data
rates (maximum speed of 54 Mbps). Wireless-B clients
cannot be connected in this mode.
•
Mixed This option allows both Wireless-B and
Wireless-G client devices to connect to the Access
Point at their respective data rates. Wireless-G devices
can be connected at Wireless-G data rates.
Wireless Channel Select the appropriate channel to
communicate between the Access Point and your client
devices. The default is channel 6. You can also select Auto
so that your Access Point will select the channel with the
lowest amount of wireless interference while the system is
powering up. Auto channel selection will start when you
click the Apply button, it will take several seconds to scan
through all the channels to find the best channel.
Wireless > Wireless Security
Select SSID Select any of the SSID names configured on
the Basic Wireless Settings screen.
Wireless Isolation (between SSID) Wireless Isolation
prevents eavesdropping in the network. When it is
Enabled, wireless frames received on this Access Point will
not be forwarded to other wireless networks (SSIDs). For
example, if you have a wireless hotspot, you may want to
keep the wireless network (SSID) isolated from your other
wireless networks (SSIDs). This is a global option applying
to all SSIDs. The default is Enabled.
SSID Name The SSID is the unique name shared among
all devices in a wireless network. It is case-sensitive, must
not exceed 32 alphanumeric characters, and may be any
keyboard character. Make sure this setting is the same
for all devices in your wireless network. The default SSID
name is linksys-g.
The following options are specific for each SSID:
SSID Broadcast This option allows the SSID to be
broadcast on your network. Click Enabled to broadcast
the SSID to all wireless devices in range. Click Disabled
to increase network security and prevent the SSID from
being seen on networked PCs. The default is Enabled to
make network configuration easier.
Security Mode Select the wireless security mode you
want to use. The detailed options are described on the
following pages:
•
•
•
•
•
•
•
•
WEP
WPA-Personal
WPAꢁ-Personal
WPAꢁ-Personal Mixed
WPA-Enterprise
WPAꢁ-Enterprise
WPAꢁ-Enterprise Mixed
RADIUS
Change these settings as described here and click Apply
to save your changes. Help information is available on the
right side of the screen.
Wireless > Wireless Security
Change the Access Point’s wireless security settings on
this screen.
NOTE: WPA stands for Wi-Fi Protected Access,
which is a security standard stronger than
WEP encryption and forward compatible with
IEEE 802.11i. WEP stands for Wired Equivalent
Privacy, Enterprise modes use a RADIUS server
for authentication, while RADIUS stands for
Remote Authentication Dial-In User Service.
To disable wireless security completely, select Disabled.
The default is Disabled.
8
Wireless-G Access Point with Power Over Ethernet
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Configuration
Chapter 5
Wireless Isolation (within SSID) When disabled, wireless
PCs that are associated to the same network name (SSID),
can see and transfer files between each other. By enabling
this feature, Wireless PCs will not be able to see each other.
This feature is very useful when setting up a wireless
hotspot location. The default is Disabled.
WPA-Personal (aka WPA-PSK)
The following section describes the detailed options for
each Security Mode.
WEP
This security mode is defined in the original IEEE 802.11
specification. This mode is not recommended now due to
its weak security protection. Users are urged to migrate to
WPA or WPA2.
Wireless > Wireless Security > WPA-Personal
Encryption WPA offers you two encryption methods,TKIP
and AES for data encryption. Select the type of encryption
you want to use, TKIP or AES. The default is TKIP.
Shared Secret Enter
a
WPA Shared Key of 8-63
characters.
Key Renewal Timeout Enter a Key Renewal Timeout
period, which instructs the Access Point how often it
should change the encryption keys. The default is ꢂ600
seconds.
Change these settings as described here and click Apply
to save your changes. Help information is available on the
right side of the screen.
Wireless > Wireless Security > WEP
Authentication Type Choose the 802.11 authentication
type as either Open System or Shared Key. The default is
Open System.
WPA2-Personal
Default Transmit Key Select the key to be used for data
encryption. The default is ꢀ.
Encryption Select a level of WEP encryption, 64 bits (10
hex digits) or 128 bits (26 hex digits). The default setting
is 64 bits.
Passphrase If you want to generate WEP keys using a
Passphrase, then enter the Passphrase in the field provided
and click the Generate button. Auto-generated keys are
not as strong as manual WEP keys.
Key ꢀ-4 If you want to manually enter WEP keys, then
complete the fields provided. Each WEP key can consist of
the letters“A”through“F”and the numbers“0”through“9”.
It should be 10 characters in length for 64-bit encryption
or 26 characters in length for 128-bit encryption.
Wireless > Wireless Security > WPA2-Personal
Encryption WPA2 always uses AES for data encryption.
Change these settings as described here and click Apply
to save your changes. Help information is available on the
right side of the screen.
Shared Secret Enter
characters.
a
WPA Shared Key of 8-63
Key Renewal Timeout Enter a Key Renewal Timeout
period, which instructs the Access Point how often it
9
Wireless-G Access Point with Power Over Ethernet
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Configuration
Chapter 5
should change the encryption keys. The default is ꢂ600
seconds.
Change these settings as described here and click Apply
to save your changes. Help information is available on the
right side of the screen.
WPA2-Personal Mixed
This security mode supports the transition from WPA-
Personal to WPA2-Personal. You can have client devices
that use either WPA-Personal or WPA2-Personal. The
Access Point will automatically choose the encryption
algorithm used by each client device.
Wireless > Wireless Security > WPA-Enterprise
RADIUS Server IP Address Enter the RADIUS server’s IP
address.
RADIUS Server Port Enter the port number used by the
RADIUS server. The default is ꢀ8ꢀꢁ.
Encryption WPA offers you two encryption methods,TKIP
and AES for data encryption. Select the type of algorithm
you want to use, TKIP or AES. The default is TKIP.
Shared Secret Enter the Shared Secret key used by the
Access Point and RADIUS server.
Key Renewal Timeout Enter a Key Renewal Timeout
period, which instructs the Access Point how often it
should change the encryption keys. The default is ꢂ600
seconds.
Wireless > Wireless Security > WPA2=Personal Mixed
Encryption Mixed Mode automatically chooses TKIP or
AES for data encryption.
Change these settings as described here and click Apply
to save your changes. Help information is available on the
right side of the screen.
Shared Secret Enter
a
WPA Shared Key of 8-63
characters.
Key Renewal Timeout Enter a Key Renewal Timeout
period, which instructs the Access Point how often it
should change the encryption keys. The default is ꢂ600
seconds.
WPA2-Enterprise
This option features WPA2 used in coordination with a
RADIUS server for client authentication. (This should only
be used when a RADIUS server is connected to the Access
Point.)
Change these settings as described here and click Apply
to save your changes. Help information is available on the
right side of the screen.
WPA-Enterprise
This option features WPA used in coordination with a
RADIUS server for client authentication. (This should only
be used when a RADIUS server is connected to the Access
Point.)
Wireless > Wireless Security > WPA2-Enterprise
ꢀ0
Wireless-G Access Point with Power Over Ethernet
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Configuration
Chapter 5
RADIUS Server IP Address Enter the RADIUS server’s IP
address.
Change these settings as described here and click Apply
to save your changes. Help information is available on the
right side of the screen.
RADIUS Server Port Enter the port number used by the
RADIUS server. The default is ꢀ8ꢀꢁ.
RADIUS
Encryption WPA2 always uses AES for data encryption.
This security mode is also known as DynamicWEP with IEEE
802.1X. A RADIUS server is used for client authentication
and WEP is used for data encryption. The WEP key is
automatically generated by the RADIUS server. Manual
WEP key is no longer supported to ensure compatibility
with Microsoft’s Windows implementation.
Shared Secret Enter the Shared Secret key used by the
Access Point and RADIUS server.
Key Renewal Timeout Enter a Key Renewal Timeout
period, which instructs the Access Point how often it
should change the encryption keys. The default is ꢂ600
seconds.
Change these settings as described here and click Apply
to save your changes. Help information is available on the
right side of the screen.
WPA2-Enterprise Mixed
This security mode supports the transition from WPA-
Enterprise to WPA2-Enterprise. You can have client devices
that use either WPA-Enterprise or WPA2-Enterprise. The
Access Point will automatically choose the encryption
algorithm used by each client device.
Wireless > Wireless Security > RADIUS
RADIUS Server IP Address Enter the RADIUS server’s IP
address.
RADIUS Server Port Enter the port number used by the
RADIUS server. The default is 1812.
Shared Secret Enter the Shared Secret key used by the
Access Point and RADIUS server.
Change these settings as described here and click Apply
to save your changes. Help information is available on the
right side of the screen.
Wireless > Wireless Security > WPA2-Enterprise Mixed
Disable
RADIUS Server IP Address Enter the RADIUS server’s IP
address.
There are no options to be configured for this mode.
Change these settings as described here and click Apply
to save your changes. Help information is available on the
right side of the screen.
RADIUS Server Port Enter the port number used by the
RADIUS server. The default is 1812.
Encryption Mixed Mode automatically chooses TKIP or
AES for data encryption.
Shared Secret Enter the Shared Secret key used by the
Access Point and RADIUS server.
Key Renewal Timeout Enter a Key Renewal Timeout
period, which instructs the Access Point how often it
should change the encryption keys. The default is 3600
seconds.
ꢀꢀ
Wireless-G Access Point with Power Over Ethernet
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Configuration
Chapter 5
Change these settings as described here and click Apply
to save your changes. Help information is available on the
right side of the screen.
Wireless > Wireless Connection Control
This screen allows you to configure the Connection Control
List to either permit or block specific wireless client devices
connecting to (associating with) the Access Point.
Wireless > Advanced Wireless Settings
This screen allows you to configure the advanced wireless
settings for the Access Point. Linksys recommends letting
the Access Point automatically adjust the parameters for
maximum data throughput.
Wireless > Wireless Connection Control
Select SSID Select the SSID of the wireless network that
you want to use wireless connection control on.
Connection Control Enable or disable wireless
connection control. The default is set to Disable. When
connection control is enabled, the following options are
available:
Wireless > Advanced Wireless Settings
CTS Protection Mode CTS (Clear-To-Send) Protection
Mode function boosts the Access Point’s ability to catch
all wireless transmissions, but will severely decrease
performance. Auto allows the Access Point to use this
feature as needed, when Wireless-G products are not able
to transmit to the Access Point in an environment with
heavy 802.11b traffic. This option is Disabled by default.
•
Allow only following MAC addresses to connect to
wireless network When this option is selected, only
deviceswithaMACaddressspecifiedintheConnection
Control List can connect to the Access Point.
•
Prevent following MAC addresses from connecting
to wireless network When this option is selected,
deviceswithaMACaddressspecifiedintheConnection
Control List will not be allowed to connect to the
Access Point.
BSSBasicRateSet This setting is a series of rates that
are advertised to other wireless devices as defined in
IEEE 802.11 specifications, so they know which data rates
the Access Point can support. One of the rates is picked
from the list for transmitting control frames, broadcast/
multicast frames, or ACK frames. To support both 802.11b
& 802.11g devices, use the Default (Mixed) setting so that
frames can be decoded by all devices. To support 802.11g
devices only, use the All (G-only) setting to achieve higher
frame rates. For regular data frames, the transmission rate
is configured through the Tx Rate Limiting on the Wireless
> VLAN & QoS tab.
Wireless Client List Instead of manually entering the
MAC addresses of each client, the Access Point provides a
convenient way to select a specific client device from the
client association table. Click this button and a window
appears to let you select a MAC address from the table.The
selected MAC address will be entered into the Connection
Control List.
Power Output You can adjust the output power of the
Access Point to get the appropriate coverage for your
wireless network. Select the level you need for your
environment. If you are not sure of which setting to
choose, then keep the default setting, ꢀ00%.
Wireless Client List
Beacon Interval This value indicates the frequency
interval of the beacon. A beacon is a packet broadcast
by the Access Point to keep the network synchronized. A
beacon includes the wireless networks service area, the
Connection Control List MAC 01-16 Enter the MAC
addresses of the wireless client devices you want to
control.
ꢀꢁ
Wireless-G Access Point with Power Over Ethernet
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Configuration
Chapter 5
Access Point address, the Broadcast destination addresses,
a time stamp, Delivery Traffic Indicator Maps, and the
Traffic Indicator Message (TIM). The default is ꢀ00 ms.
tagged traffic coming in from the wired LAN. The default
is Disabled.
Default VLAN ID Enter the default VLAN ID number (1
- 4094), the default value is ꢀ. The default VLAN number
should match with your Switch’s settings. For example,
the SRW2024 has Trunk port mode which set default VLAN
(PVID) to 1 untagged, while General port mode can set
PVID to any VLAN either tagged or untagged.
DTIM Interval This value indicates how often the Access
Point sends out a Delivery Traffic Indication Message
(DTIM). Lower settings result in more efficient networking,
while preventing your PC from dropping into power-
saving sleep mode. Higher settings allow your PC to
enter sleep mode, thus saving power, but interferes with
wireless transmissions. The default is ꢀ ms.
Default VLAN Set the tagging option for the default
VLAN ID. This has to match your Switch’s settings. The
default is untagged.
RTS Threshold Thissettingdetermineshowlargeapacket
can be before the Access Point coordinates transmission
and reception to ensure efficient communication. This
value should remain at its default setting of ꢁꢂ4ꢃ. If you
encounterinconsistentdataflow,onlyminormodifications
are recommended.
ManagementVLANID WhentheVLANoptionisenabled,
the value entered (VLAN ID) in this field defines the VLAN
that connects to the Access Point. The default value is
ꢀ. The VLAN should be accessible from the wired side in
order to use web-based utility. To access the web-based
utility from wireless side, the SSID needs to map to the
same VLAN ID. Remember to enable wireless web access
on the Administration > Management tab.
Fragmentation Threshold This specifies the maximum
size a data packet can be before splitting and creating a
new packet. It should remain at its default setting of ꢁꢂ46.
A smaller setting means smaller packets, which will create
more packets for each transmission. If you experience
high packet error rates, you can decrease this value, but
it will likely decrease overall network performance. Only
minor modifications of this value are recommended.
The following options are VLAN global settings for the
Access Point.
Default CoS (Priority) Select Enabled if you want to
assign a default CoS value to each SSID. This option is
automatically enabled when the VLAN option is enabled.
The default is Disabled.
Change these settings as described here and click Apply
to save your changes. Help information is available on the
right side of the screen.
U-APSD (Unscheduled Automatic Power Save
Delivery) This option is only available when WMM is
enabled on any of the SSIDs. Select Enabled if you want
client devices with U-APSD capability to take advantage
of the power save mode. The default is Disabled.
Wireless > VLAN & QoS
This screen allows you to configure the VLAN and QoS
related settings for the Access Point.
SSID Name Displays the SSIDs defined on the Basic
Wireless Settings screen. If an SSID has been disabled, the
options cannot be configured.
VLAN ID Select a VLAN ID (1 - 4094) for the SSID where
you want to map the traffic to on the wired side. The
wireless traffic will not carry VLAN information. Multiple
SSIDs can map to the same VLAN on the wired side.
Priority You can assign the default priority (802.1p CoS
bits) for packets coming in from each wireless network by
selecting a value from the drop-down menu. The default
is Low.
Tx Rate Limitation You can limit the maximum data
rate used in your network to save bandwidth and power
consumption on client devices. The actual data rate is
determined by the Auto-Fallback mechanism between
your Access Point and a client device. The default is 54
Mbps.
Wireless > VLAN & QoS
VLAN Select Enabled if you want to pass 802.1q VLAN
tagged traffic between the wired LAN and wireless LAN.
Your Access Point will map the VLAN tag (wired side) to
different SSIDs (wireless side) according to your specified
settings. Select Disabled and your Access Point will drop all
WMM Wi-Fi Multimedia is a QoS feature defined by the
WiFi Alliance before IEEE 802.11e was finalized. Now it is
part of IEEE 802.11e. When this is enabled, it provides four
ꢀꢂ
Wireless-G Access Point with Power Over Ethernet
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Configuration
Chapter 5
priority queues for different types of traffic. It automatically
maps the incoming packets to the appropriate queues
based on QoS settings (in the IP or layer 2 header). WMM
provides the capability to prioritize wireless traffic in your
environment. The default is Disabled (unchecked).
have its signal repeated by this Access Point or enter the
MAC address of the access point manually.
AP Mode
On this screen you can change the Access Point’s mode of
operation. In most cases, you can keep the default setting
- Access Point. You may wish to change the Access Point’s
mode of operation if you want to use the Access Point as
a wireless repeater to extend the range of your wireless
network. You may also wish to change the Access Point’s
mode of operation if you want to use the Access Point as
a wireless bridge; for example, you can use two Access
Points in Wireless Bridge mode to connect two wired
networks that are in two different buildings.
AP Mode > Wireless Repeater > Site Survey
WirelessBridge Thismodeconnectsphysicallyseparated
wired networks using multiple access points. Wireless
clients will not be able to connect to the access point in
this mode. Enter the MAC address(es) of the access point(s)
that will bridge to this access point.
Administration > Management
On this screen you can configure the password, Web
Access, and SNMP settings.
The AP Mode Tab
The Access Point offers three modes of operation: Access
Point, Wireless Repeater, and Wireless Bridge. For the
Repeater and Bridge modes, make sure the SSID, channel,
and security settings are the same for the other wireless
access points/devices.
MAC Address The MAC address of the Access Point is
displayed here.
Access Point The Mode is set to Access Point by default.
This connects your wireless PCs to a wired network. In
most cases, no change is necessary.
Administration > Management
Allow wireless signal to be repeated by
a
You should change the User Name/Password that controls
access to the Access Point’s web-based utility.
repeater Select this option if you want to use another
wireless device to repeat the signal of this Access Point.
You will need to enter the MAC address(es) of the
repeating device(s). Up to 3 repeaters can be used.
User Name Modify the administrator user name. The
default is admin.
Password Modify the administrator password for the
Access Point’s web-based utility. The default is admin.
Wireless Repeater When set to Wireless Repeater mode,
the Wireless Repeater is able to communicate with a
remote access point within its range and retransmit its
signal. Click Site Survey to select the access point that will
Re-enter to confirm To confirm the new Password, enter
it again in this field.
ꢀ4
Wireless-G Access Point with Power Over Ethernet
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Configuration
Chapter 5
To increase the security on accessing web-based utility.
You can enable HTTPS. Once enabled, users need to use
Web HTTPS Access Use secured HTTP session to access
web-based utility. The default is Disabled.
Wireless Web Access Allow or deny wireless clients to
access web-based utility. The default is Disabled.
SNMP
SNMP is a popular network monitoring and management
protocol. It provides network administrators with the
ability to monitor the status of the Access Point and
receive notification of any critical events as they occur on
the Access Point.
Administration > Log
E-Mail Alert If you want the Access Point to send e-mail
alerts in the event of certain attacks, select Enabled. The
default is Disabled.
To enable the SNMP support feature, select Enabled.
Otherwise, select Disabled. The default is Disabled.
SNMP V.ꢂ Username Create a SNMP V3 administrator to
access and manage MIB objects.
E-Mail Address for Logs Enter the e-mail address that
will receive logs.
Authentication Password Enter the authentication
password for the SNMP V3 administrator. The minimum
password length is 8 characters.
Log Queue Length You can designate the length of the
log that will be e-mailed to you. The default is ꢁ0 entries.
Log Time Threshold You can designate how often the
log will be e-mailed to you. The default is 600 seconds (10
minutes).
Privacy Password Enter the privacy password for the
SNMP V3 administrator. The minimum password length is
8 characters.
Syslog Notification Syslog is a standard protocol used
to capture information about network activity. The Access
Point supports this protocol and sends its activity logs to
an external server. To enable Syslog, select Enabled. The
default is Disabled.
Get Community Enter the password that allows read-
only access to the Access Point’s SNMP information. The
default is public.
Set Community Enter the password that allows read/
write access to the Access Point’s SNMP information. The
default is private.
Syslog Server IP Address Enter the IP address of the
Syslog server. In addition to the standard event log, the
Access Point can send a detailed log to an external Syslog
server. The Access Point’s Syslog captures all log activities
and includes this information about all data transmissions:
every connection source and destination IP address, IP
server, and number of bytes transferred.
SNMP Trap-Community Enter the password required by
the remote host computer that will receive trap messages
or notices sent by the Access Point.
SNMP Trusted Host You can restrict access to the Access
Point’s SNMP information by IP address. Enter the IP
address in the field provided. If this field is set to 0.0.0.0,
then access is permitted from any IP address.
Log
Select the events that you want the Access Point to keep
a log.
SNMP Trap-Destination Enter the IP address of the
remote host computer that will receive the trap messages.
To prevent sending traps to any host in your LAN, enter
0.0.0.0 as the trap destination.
Unauthorized Login Attempt If you want to receive
alert logs about any unauthorized login attempts, click
the check box.
Change these settings as described here and click Apply
to save your changes. Help information is available on the
right side of the screen.
Authorized Login If you want to log authorized logins,
click the check box.
System Error Messages If you want to log system error
messages, click the check box.
Administration > Log
On this screen you can configure the log settings and
alerts of particular events.
Configuration Changes If you want to log any
configuration changes, click the check box.
ꢀ5
Wireless-G Access Point with Power Over Ethernet
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Configuration
Chapter 5
Change these settings as described here and click Apply
to save your changes. Help information is available on the
right side of the screen.
Administration > Factory Default
On this screen you can restore the Access Point’s factory
default settings.
Administration > Firmware Upgrade
To upgrade the Access Point’s firmware:
1. Download the firmware upgrade file from the Linksys
2. Extract the firmware upgrade file on your computer.
3. On the Firmware Upgrade screen, enter the location of
the firmware upgrade file in the field provided, or click
the Browse button to find the file.
Administration > Factory Default
Note any custom settings before you restore the factory
defaults. Once the Access Point is reset, you will have to
re-enter all of your configuration settings.
4. Click the Apply button, and follow the on-screen
instructions.
Help information is available on the right side of the
screen.
Restore Factory Defaults To restore the Access Point’s
factory default settings, follow the steps below:
Administration > Reboot
1. Click the Yes option.
2. Click the Apply button.
On this screen you can reboot the Access Point.
3. Click OK to confirm that you want to restore the
factory default settings. Your Access Point will reboot
and come back up with the factory default settings in
a few seconds.
Administration > Firmware Upgrade
OnthisscreenyoucanupgradetheAccessPoint’sfirmware.
Do not upgrade the firmware unless you are experiencing
problems with the Access Point or the new firmware has a
feature you want to use.
Administration > Reboot
This feature is useful when you need to remotely reboot
the Access Point.
Device Reboot To reboot the Access Point, click the Yes
option. Click Apply and the Access Point will reboot itself.
Help information is available on the right side of the
screen.
ꢀ6
Wireless-G Access Point with Power Over Ethernet
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Configuration
Chapter 5
Administration > Configuration Management
Status > Local Network
On this screen you can save a configuration file of the
Access Point’s current settings or restore a configuration
file of previously saved settings.
The Local Network screen displays the Access Point’s
current status information for the local network.
Status > Local Network
Administration > Configuration Management
HardwareVersion This is the version of the Access Point’s
Save Configuration To save a backup configuration file,
click the Save Configuration button and save the file to
the desired location.
current hardware.
Software Version This is the version of the Access Point’s
current software.
Restore Configuration To upload a configuration file to
the Access Point, follow the steps below:
Local MAC Address The MAC address of the Access
Point’s Local Area Network (LAN) interface is displayed
here.
1. Type the filename and path of the configuration file in
the field provided or click the Browse button to locate
the file.
System Up Time This is the length of time the Access
Point has been running.
2. Click the Apply button.
IP Address This shows the Access Point’s IP Address, as it
Help information is available on the right side of the
screen.
appears on your local network.
Subnet Mask This shows the Access Point’s Subnet
Mask.
Default Gateway This displays the Access Point’s default
gateway information.
Primary DNS This displays the Access Point’s primary
DNS information.
Secondary DNS This displays the Access
Point’s
secondary DNS information.
Help information is available on the right side of the
screen.
ꢀꢃ
Wireless-G Access Point with Power Over Ethernet
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Configuration
Chapter 5
Status > Wireless
Status > System Performance
The Wireless screen displays the Access Point’s current
status information for the wireless network(s).
The System Performance screen displays the Access
Point’s status information for its current settings and data
transmissions.
Status > Wireless
MAC Address The MAC Address of the Access Point’s
wireless interfaces is displayed here.
Mode The Access Point’s wireless network mode is
displayed here.
Status > System Performance
SSID ꢀ-4 The Access Point’s SSIDs that have been
configured are displayed here.
Wired
Name This indicates that the statistics are for the wired
network, the LAN.
Channel The Access Point’s Channel setting for the SSID
is shown here.
IP Address The Access Point’s local IP address is displayed
here.
VLAN Trunk The VLAN Trunk Status is displayed here.
Priority Setting The priority setting status is displayed
here.
MAC Address This shows the MAC Address of the Access
Point’s wired interface.
SSID ꢀ-4 Security Mode Displays the security mode
utilized for the appropriate SSID.
Connection This shows the status of the Access Point’s
connection for the wired network.
SSID ꢀ-4 Priority Displays the priority of the SSID.
Packets Received This shows the number of packets
received.
Help information is available on the right side of the
screen.
Packets Sent This shows the number of packets sent.
Bytes Received This shows the number of bytes
received.
Bytes Sent This shows the number of bytes sent.
Error Packets Received This shows the number of error
packets received.
Drop Received Packets This shows the number of
packets being dropped after they were received.
Wireless
Name This indicates the wireless network/SSID to which
the statistics refer.
IP Address The Access Point’s local IP address is displayed
here.
ꢀ8
Wireless-G Access Point with Power Over Ethernet
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Configuration
Chapter 5
MAC Address This shows the MAC Address of the Access
Point’s wireless interface.
Connection This shows the status of the Access Point’s
wireless networks.
Packets Received This shows the number of packets
received for each wireless network.
Packets Sent This shows the number of packets sent for
each wireless network.
Bytes Received This shows the number of bytes received
for each wireless network.
Bytes Sent This shows the number of bytes sent for each
wireless network.
Error Packets Received This shows the number of error
packets received for each wireless network.
Drop Received Packets This shows the number of
packets being dropped after they were received.
Help information is available on the right side of the
screen.
ꢀ9
Wireless-G Access Point with Power Over Ethernet
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Appendix A
What IEEE 802.11b features are supported?
Appendix A:
Troubleshooting
This appendix provides solutions to problems that
may occur during the installation and operation of the
Wireless-G Exterior Access Point with Power Over Ethernet.
Read the description below to solve your problems. If you
can’t find an answer here, check the Linksys website at
The product supports the following IEEE 802.11
functions:
•
•
•
•
•
•
CSMA/CA plus Acknowledge protocol
Multi-Channel Roaming
Automatic Rate Selection
RTS/CTS feature
Fragmentation
Power Management
Can the Access Point act as my DHCP Server?
What IEEE 802.11g features are supported?
No. The Access Point is nothing more than a wireless
hub, and as such cannot be configured to handle DHCP
capabilities.
The product supports the following IEEE 802.11g
functions:
•
•
•
•
•
•
•
CSMA/CA plus Acknowledge protocol
OFDM protocol
Can I run an application from a remote computer over
the wireless network?
Multi-Channel Roaming
Automatic Rate Selection
RTS/CTS feature
This will depend on whether or not the application
is designed to be used over a network. Consult the
application’s documentation to determine if it supports
operation over a network.
Fragmentation
Power Management
Can I play multiplayer games with other users of the
wireless network?
What is Ad-hoc?
An Ad-hoc wireless LAN is a group of computers, each
with a WLAN adapter, connected as an independent
wireless LAN. An Ad-hoc wireless LAN is applicable at a
departmental scale for a branch or SOHO operation.
Yes, as long as the game supports multiple players
over a LAN (local area network). Refer to the game’s
documentation for more information.
What is the IEEE 802.11b standard?
What is Infrastructure?
It is one of the IEEE standards for wireless networks. The
802.11b standard allows wireless networking hardware
from different manufacturers to communicate, provided
that the hardware complies with the 802.11b standard.
An integrated wireless and wired LAN is called an
Infrastructure configuration. Infrastructure is applicable to
enterprise scale for wireless access to a central database,
or wireless application for mobile workers.
The 802.11b standard states a maximum data transfer rate
of 11Mbps and an operating frequency of 2.4 GHz.
What is roaming?
Roaming is the ability of a portable computer user
to communicate continuously while moving freely
throughout an area greater than that covered by a single
Access Point. Before using the roaming function, the
workstation must make sure that it is set to the same
channel number as the Access Point of the dedicated
coverage area.
What is the IEEE 802.11g standard?
It is one of the IEEE standards for wireless networks. The
802.11g standard allows wireless networking hardware
from different manufacturers to communicate, provided
that the hardware complies with the 802.11g standard.
The 802.11g standard states a maximum data transfer rate
of 54Mbps and an operating frequency of 2.4 GHz.
To achieve true seamless connectivity, the wireless
LAN must incorporate a number of different functions.
Each node and Access Point, for example, must always
acknowledge receipt of each message. Each node must
maintain contact with the wireless network even when
not actually transmitting data. Achieving these functions
simultaneously requires
a
dynamic RF networking
ꢁ0
Wireless-G Access Point with Power Over Ethernet
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Appendix A
technology that links Access Points and nodes. In such
a system, the user’s end node undertakes a search for
the best possible access to the system. First, it evaluates
such factors as signal strength and quality, as well as the
message load currently being carried by each Access
Point and the distance of each Access Point to the wired
backbone. Based on that information, the node next
selects the right Access Point and registers its address.
Communications between end node and host computer
can then be transmitted up and down the backbone.
Spectrum (DSSS) generates a redundant bit pattern for
each bit to be transmitted. This bit pattern is called a
chip (or chipping code). The longer the chip, the greater
the probability that the original data can be recovered.
Even if one or more bits in the chip are damaged during
transmission, statistical techniques embedded in the
radio can recover the original data without the need for
retransmission. To an unintended receiver, DSSS appears
as low power wideband noise and is rejected (ignored) by
most narrowband receivers.
As the user moves on, the end node’s RF transmitter
regularly checks the system to determine whether it
is in touch with the original Access Point or whether
it should seek a new one. When a node no longer
receives acknowledgment from its original Access Point,
it undertakes a new search. Upon finding a new Access
Point, it then re-registers, and the communication process
continues.
Would the information be intercepted while transmitting
on air?
WLAN features two-fold protection in security. On the
hardware side, as with Direct Sequence Spread Spectrum
technology, it has the inherent security feature of
scrambling. On the software side, the WLAN series offers
a variety of wireless security methods to enhance security
and access control. Users can set it up depending upon
their needs.
What is the ISM band?
The FCC and their counterparts outside of the U.S. have set
aside bandwidth for unlicensed use in the ISM (Industrial,
Scientific and Medical) band. Spectrum in the vicinity of
2.4 GHz, in particular, is being made available worldwide.
This presents a truly revolutionary opportunity to place
convenient high speed wireless capabilities in the hands
of users around the globe.
Can Linksys wireless products support file and printer
sharing?
Linksys wireless products perform the same function as
LAN products. Therefore, Linksys wireless products can
work with NetWare, Windows NT/2000, or other LAN
operating systems to support printer or file sharing.
What is Spread Spectrum?
What is WEP?
Spread Spectrum technology is
a
wideband radio
WEP isWired Equivalent Privacy, a data privacy mechanism
based on a 40-bit shared-key algorithm, as described in
the IEEE 802.11 standard.
frequency technique developed by the military for use
in reliable, secure, mission-critical communications
systems. It is designed to trade off bandwidth efficiency
for reliability, integrity, and security. In other words, more
bandwidth is consumed than in the case of narrowband
transmission, but the trade-off produces a signal that
is, in effect, louder and thus easier to detect, provided
that the receiver knows the parameters of the spread-
spectrum signal being broadcast. If a receiver is not tuned
to the right frequency, a spread-spectrum signal looks
like background noise. There are two main alternatives,
Direct Sequence Spread Spectrum (DSSS) and Frequency
Hopping Spread Spectrum (FHSS).
What is a MAC Address?
The Media Access Control (MAC) address is a unique
number assigned by the manufacturer to any Ethernet
networking device, such as a network adapter, that allows
the network to identify it at the hardware level. For all
practical purposes, this number is usually permanent.
Unlike IP addresses, which can change every time a
computer logs on to the network, the MAC address of a
device stays the same, making it a valuable identifier for
the network.
What is DSSS? What is FHSS? And what are their
differences?
How do I avoid interference?
Using multiple Access Points on the same channel and in
close proximity to one another will generate interference.
When employing multiple Access Points, make sure to
operate each one on a different channel (frequency).
Frequency Hopping Spread Spectrum (FHSS) uses a
narrowband carrier that changes frequency in a pattern
that is known to both transmitter and receiver. Properly
synchronized, the net effect is to maintain a single logical
channel. To an unintended receiver, FHSS appears to be
short-duration impulse noise. Direct Sequence Spread
ꢁꢀ
Wireless-G Access Point with Power Over Ethernet
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Appendix A
How do I reset the Access Point?
Press the Reset button on the back of the Access Point for
about ten seconds. This will reset the unit to its default
settings.
How do I resolve issues with signal loss?
There is no way to know the exact range of your wireless
network without testing. Every obstacle placed between
an Access Point and wireless PC will create signal loss.
Leaded glass, metal, concrete floors, water, and walls will
inhibit the signal and reduce range. Start with your Access
Point and your wireless PC in the same room and move
it away in small increments to determine the maximum
range in your environment.
You may also try using different channels, as this may
eliminate interference affecting only one channel. Also,
open the Access Point’s Web-based Utility. Click the
Wireless tab and then the Advanced Wireless tab. Make
sure the Output Power is set to 100%.
Does the Access Point function as a firewall?
No. The Access Point is only a bridge from wired Ethernet
to wireless clients.
I have excellent signal strength, but I cannot see my
network.
Wireless security, such as WEP or WPA, is probably enabled
on the Access Point, but not on your wireless adapter (or
vice versa). Verify that the same wireless security settings
are being used on all devices in your wireless network.
What is the maximum number of users the Access Point
can handle?
No more than 65, but this depends on the volume of data
and may be fewer if many users create a large amount of
network traffic.
WEB: If your questions are not addressed here,
refer to the Linksys website, www.linksys.com
ꢁꢁ
Wireless-G Access Point with Power Over Ethernet
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless Security Checklist
Appendix B
Appendix B:
4. Enable encryption
Wireless Security Checklist
Encryption protects data transmitted over a wireless
network. Wi-Fi Protected Access (WPA/WPA2) and Wired
Equivalency Privacy (WEP) offer different levels of security
for wireless communication. Currently, devices that are
Wi-Fi certified are required to support WPA2, but are not
required to support WEP.
Wireless networks are convenient and easy to install, so
homes with high-speed Internet access are adopting them
at a rapid pace. Because wireless networking operates by
sending information over radio waves, it can be more
vulnerable to intruders than a traditional wired network.
Like signals from your cellular or cordless phones, signals
from your wireless network can also be intercepted. Since
you cannot physically prevent someone from connecting
to your wireless network, you need to take some additional
steps to keep your network secure.
A network encrypted with WPA/WPA2 is more secure
than a network encrypted with WEP, because WPA/WPA2
uses dynamic key encryption. To protect the information
as it passes over the airwaves, you should enable the
highest level of encryption supported by your network
equipment.
ꢀ. Change the default wireless
network name or SSID
WEP is an older encryption standard and may be the
only option available on some older devices that do not
support WPA.
Wireless devices have a default wireless network name
or Service Set Identifier (SSID) set by the factory. This
is the name of your wireless network, and can be up
to 32 characters in length. Linksys wireless products
use linksys as the default wireless network name. You
should change the wireless network name to something
unique to distinguish your wireless network from other
wireless networks that may exist around you, but do not
use personal information (such as your Social Security
number) because this information may be available for
anyone to see when browsing for wireless networks.
General Network Security Guidelines
Wireless network security is useless if the underlying
network is not secure.
• Password protect all computers on the network and
individually password protect sensitive files.
• Change passwords on a regular basis.
• Install anti-virus software and personal firewall
software.
• Disable file sharing (peer-to-peer). Some applications
may open file sharing without your consent and/or
knowledge.
ꢁ. Change the default password
For wireless products such as access points and routers,
you will be asked for a password when you want to change
their settings. These devices have a default password set
by the factory. The Linksys default password is admin.
Hackers know these defaults and may try to use them
to access your wireless device and change your network
settings. To thwart any unauthorized changes, customize
the device’s password so it will be hard to guess.
Additional Security Tips
• Keep wireless routers, access points, or gateways away
from exterior walls and windows.
• Turn wireless routers, access points, or gateways
off when they are not being used (at night, during
vacations).
• Usestrongpassphrasesthatareatleasteightcharacters
in length. Combine letters and numbers to avoid using
standard words that can be found in the dictionary.
ꢂ. Enable MAC address filtering
Linksys routers give you the ability to enable Media Access
Control (MAC) address filtering. The MAC address is a
unique series of numbers and letters assigned to every
networking device. With MAC address filtering enabled,
wireless network access is provided solely for wireless
devices with specific MAC addresses. For example, you can
specify the MAC address of each computer in your home
so that only those computers can access your wireless
network.
ꢁꢂ
Wireless-G Access Point with Power Over Ethernet
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
Appendix C
Baud Indicates the number of signaling elements
transmitted each second.
Appendix C:
Glossary
Best Effort Indicates that traffic is assigned to the lowest
priority queue, and packet delivery is not guaranteed.
This glossary contains some basic networking terms you
may come across when using this product.
Bit A binary digit.
Boot To start a device and cause it to start executing
instructions.
WEB: For additional terms, please visit the
glossary at www.linksys.com/glossary
Browser An application program that provides a way to
look at and interact with all the information on the World
Wide Web.
Access Mode Specifies the method by which user access
is granted to the system.
Bridge A device that connect two networks. Bridges are
hardwarespecific,howevertheyareprotocolindependent.
Bridges operate at Layer 1 and Layer 2 levels.
Access Point A device that allows wireless-equipped
computers and other devices to communicate with a
wired network. Also used to expand the range of a wireless
network.
Broadcast Domain Devices sets that receive broadcast
frames originating from any device within a designated
set. Routers bind Broadcast domains, because routers do
not forward broadcast frames.
Access Profiles Allows network managers to define
profiles and rules for accessing the device. Access to
management functions can be limited to user groups,
which are defined by the following criteria:
Broadcast Storm An excessive amount of broadcast
messages simultaneously transmitted across a network
by a single port. Forwarded message responses are
heaped onto the network, overloading network resources
or causing the network to time out.
• Ingress interfaces
• Source IP address and/or Source IP subnets.
Burst A packet transmission at faster than normal rates.
Bursts are limited in time and only occur under specific
conditions.
ACE Filters in Access Control Lists (ACL) that determine
which network traffic is forwarded. An ACE is based on the
following criteria:
Burst Size Indicates the burst size transmitted at a faster
than normal rate.
• Protocol
• Protocol ID
Byte A unit of data that is usually eight bits long
• Source Port
Cable Modem A device that connects a computer to the
cable television network, which in turn connects to the
Internet.
• Destination Port
• Wildcard Mask
• Source IP Address
• Destination IP Address
CBS (Committed Burst Size) Indicates the maximum
number of data bits transmitted within a specific time
interval.
ACL (Access Control List) Access Control Lists are
used to grant, deny, or limit access devices, features, or
applications.
CIR (Committed Information Rate) The data rate is
averaged over a minimum time increment.
Class Maps An aspect of Quality of Service system that is
comprised of an IP ACL and/or a MAC ACL. Class maps are
configured to match packet criteria, and are matched to
packets in a first-fit fashion.
Auto-negotiation Allows 10/100 Mbps or 10/100/1000
Mbps Ethernet ports to automatically establish the
optimal duplex mode, flow control, and speed.
Back Pressure A mechanism used with Half Duplex mode
that enables a port not to receive a message.
Combo Ports A single logical port with two physical
connections, including an RJ-45 connection and a SFP
connection.
Bandwidth The transmission capacity of a given device
or network.
Communities Specifies a group of users which retain the
same system access rights.
Bandwidth Assignments Indicates the amount of
bandwidth assigned to a specific application, user, and/or
interface.
ꢁ4
Wireless-G Access Point with Power Over Ethernet
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
Appendix C
CoS (Class of Service) The 802.1p priority scheme. CoS
provides a method for tagging packets with priority
information. A CoS value between 0-7 is added to the
Layer II header of packets, where zero is the lowest priority
and seven is the highest.
Full Duplex The ability of a networking device to receive
and transmit data simultaneously.
GARP (General Attributes Registration Protocol)
Registers client stations into a multicast domain.
Gateway A device that interconnects networks with
different, incompatible communications protocols.
DDNS (Dynamic Domain Name System) Allows the
hosting of a website, FTP server, or e-mail server with a
address.
GBIC (GigaBit Interface Converter) A hardware module
usedtoattachnetworkdevicestofiber-basedtransmission
systems. GBIC converts the serial electrical signals to serial
optical signals and vice versa.
Default Gateway A device that forwards Internet traffic
from your local area network.
GVRP (GARP VLAN Registration Protocol) Registers
client stations into a VLANs.
DHCP (Dynamic Host Configuration Protocol) A
networking protocol that allows administrators to assign
temporary IP addresses to network computers by“leasing”
an IP address to a user for a limited amount of time, instead
of assigning permanent IP addresses.
Half Duplex Data transmission that can occur in two
directions over a single line, but only one direction at a
time.
HTTP
(HyperText
Transport
Protocol) The
DHCP Clients An Internet host using DHCP to obtain
communications protocol used to connect to servers on
the World Wide Web.
configuration parameters, such as a network address.
DHCP Server An Internet host that returns configuration
HTTPS (HyperText Transport Protocol Secure) An
extension to the standard HTTP protocol that provides
confidentiality by encrypting the traffic from the website.
By default this protocol uses TCP port 443.
parameters to DHCP clients.
DNS (Domain Name Server) The IP address of your ISP’s
server, which translates the names of websites into IP
addresses.
ICMP (Internet Control Message Protocol) Allows the
gateway or destination host to communicate with the
source host. For example, to report a processing error.
Domain A specific name for a network of computers.
Download To receive a file transmitted over a network.
DSL (Digital Subscriber Line) An always-on broadband
connection over traditional phone lines.
IGMP (Internet Group Management Protocol) Allows
hosts to notify their local switch or router that they want
to receive transmissions assigned to a specific multicast
group.
DSCP (DiffServ Code Point) Provides a method of
tagging IP packets with QoS priority information.
IP (Internet Protocol) A protocol used to send data over
a network.
Dynamic IP Address A temporary IP address assigned by
a DHCP server.
IP Address The address used to identify a computer or
device on a network.
EIGRP (Enhanced Interior Gateway Routing
Protocol) Provides fast convergence, support for
variable-length subnet mask, and supports multiple
network layer protocols.
IPCONFIG A Windows 2000 and XP utility that displays
the IP address for a particular networking device.
Encryption Encoding data transmitted in a network.
IPSec (Internet Protocol Security) A VPN protocol used
to implement secure exchange of packets at the IP layer.
Ethernet IEEE standard network protocol that specifies
how data is placed on and retrieved from a common
transmission medium.
ISP (Internet Service Provider) A company that provides
access to the Internet.
Firmware The programming code that runs a networking
device.
Jumbo Frames Enable transporting identical data in
fewer frames. Jumbo Frames reduce overhead, lower
processing time, and ensure fewer interrupts.
Flow Control Enables lower speed devices to
communicate with higher speed devices. This is
implemented by the higher speed device refraining from
sending packets.
LAG (Link Aggregated Group) Aggregates ports or
VLANs into a single virtual port or VLAN.
LAN The computers and networking products that make
FTP (File Transfer Protocol) A protocol used to transfer
up your local network.
files over a TCP/IP network.
ꢁ5
Wireless-G Access Point with Power Over Ethernet
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
Appendix C
MAC (Media Access Control) Address The unique
address that a manufacturer assigns to each networking
device.
RADIUS (Remote Authentication Dial-In User
Service) A protocol that uses an authentication server to
control network access.
Mask A filter that includes or excludes certain values, for
RJ-45 (Registered Jack-45) An Ethernet connector that
example parts of an IP address.
holds up to eight wires.
Mbps (MegaBits Per Second) One million bits per
RMON (Remote Monitoring) Provides network
second; a unit of measurement for data transmission.
information to be collected from a single workstation.
MD5 (Message Digest 5) An algorithm that produces a
128-bit hash. MD5 is a variation of MD4, and increases MD4
security. MD5 verifies the integrity of the communication
and authenticates the origin of the communication.
Router A networking device that connects multiple
networks together.
RSTP (Rapid Spanning Tree Protocol) Detects and uses
network topologies that allow a faster convergence of the
spanning tree, without creating forwarding loops.
MDI (Media Dependent Interface) A cable used for end
stations.
Server Any computer whose function in a network is to
provide user access to files, printing, communications,
and other services.
MDIX (Media Dependent Interface with Crossover) A
cable used for hubs and switches.
MIB (Management Information Base) MIBs contain
information describing specific aspects of network
components.
SMTP (Simple Mail Transfer Protocol) The standard
e-mail protocol on the Internet.
SNMP (Simple Network Management Protocol) A
Multicast Transmits copies of a single packet to multiple
widely used network monitoring and control protocol.
ports.
SSH Secure Shell. A utility that uses strong authentication
and secure communications to log in to another computer
over a network.
Network A series of computers or devices connected for
the purpose of data sharing, storage, and/or transmission
between users.
SSL (Secure Socket Layer) Encryption technology for
the Internet used to provide secure transactions, such as
the transmission of credit card numbers for e-commerce.
NMS (Network Management System) An interface that
provides a method of managing a system.
OID (Object Identifier) Used by SNMP to identify
managed objects. In the SNMP Manager/Agent network
management paradigm, each managed object must have
an OID to identify it.
Static IP Address A fixed address assigned to a computer
or device that is connected to a network.
STP (Spanning Tree Protocol) Prevents loops in network
traffic. The Spanning Tree Protocol (STP) provides tree
topography for any arrangement of bridges. STP provides
one path between end stations on a network, eliminating
loops.
Packet A unit of data sent over a network.
Ping (Packet INternet Groper) An Internet utility used
to determine whether a particular IP address is online.
Subnet (Sub-network) Subnets are portions of
a
Policing Determines if traffic levels are within a specified
profile. Policing manages the maximum traffic rate used
to send or receive packets on an interface.
network that share a common address component. In
TCP/IP networks, devices that share a prefix are part of
the same subnet. For example, all devices with a prefix of
157.100.100.100 are part of the same subnet.
Port The connection point on a computer or networking
device used for plugging in cables or adapters.
Subnet Mask An address code that determines the size
Port Mirroring Monitors and mirrors network traffic by
forwarding copies of incoming and outgoing packets
from one port to a monitoring port.
of the network.
Switch Filters and forwards packets between LAN
segments. Switches support any packet protocol type.
Power over Ethernet (PoE) A technology enabling an
Ethernet network cable to deliver both data and power.
TACACS+ (Terminal Access Controller Access Control
System Plus) Proprietary Cisco enhancement to Terminal
AccessControllerAccessControlSystem(TACACS).Provides
additional support for authentication, authorization, and
accounting.
QoS (Quality of Service) Provides policies that contain
sets of filters (rules). QoS allows network managers
to decide how and what network traffic is forwarded
according to priorities, application types, and source and
destination addresses.
ꢁ6
Wireless-G Access Point with Power Over Ethernet
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
Appendix C
TCP(TransmissionControlProtocol) Anetworkprotocol
for transmitting data that requires acknowledgement
from the recipient of data sent.
TCP/IP (Transmission Control Protocol/Internet
Protocol) A set of instructions PCs use to communicate
over a network.
Telnet A user command and TCP/IP protocol used for
accessing remote PCs.
TFTP (Trivial File Transfer Protocol) A version of the
TCP/IP FTP protocol that has no directory or password
capability.
Throughput The amount of data moved successfully
from one node to another in a given time period.
Trunking Link Aggregation. Optimizes port usage by
linking a group of ports together to form a single trunk
(aggregated groups).
TX Rate Transmission Rate.
UDP (User Data Protocol) Communication protocol that
transmits packets but does not guarantee their delivery.
Upgrade To replace existing software or firmware with a
newer version.
Upload To transmit a file over a network.
URL (Uniform Resource Locator) The address of a file
located on the Internet.
VLAN (Virtual Local Area Networks) Logical subgroups
that constitute a Local Area Network (LAN). This is done in
software rather than defining a hardware solution.
WAN (Wide Area Network) Networks that cover a large
geographical area.
Wildcard Mask Specifies which IP address bits are
used, and which bits are ignored. A wild card mask
of 255.255.255.255 indicates that no bit is important.
A wildcard of 0.0.0.0 indicates that all the bits are
important.
For example, if the destination IP address is 149.36.184.198
and the wildcard mask is 255.36.184.00, the first two bits
of the IP address are used, while the last two bits are
ignored.
ꢁꢃ
Wireless-G Access Point with Power Over Ethernet
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Appendix D
Appendix D:
Specifications
Specifications
# of Internal Ant.
# of External Ant.
None
Model
WAP2000
2 (Omnidirectional) 3 dBi SMA
detachable
Standards
IEEE802.11g, IEEE802.11b,
IEEE802.3, IEEE802.3u,
IEEE802.3af (Power over
Ethernet), 802.1p
(QoS priority), 802.1Q (VLAN),
802.1X
(Security Authentication),
802.11i - Ready
(Security WPA2), 802.11e
- Ready (Wireless QoS),
802.11F (Wireless Roaming)
Transmit Power
Transmit Power (Adjustable) @
Normal Temp Range:
11b - 18 dBm; 11g - 16 dBm
3 dBi
Antenna Gain
Receiver Sensitivity
11.g: 54Mbps@ -72dBm,
11.b: 11Mbps@ -85dBM
Security
WEP/WPA/WPA2
WEP 64bit/128 bit, WPA-PSK,
WPA2-PSK, WPA-ENT,
WPA2-ENT
Ports
10BASE-T/100 BASE-TX
Ethernet, 12 VDC Power
Access Control
Wireless Connection Control:
MAC-Based
Buttons
Reset
SSID Broadcast
802.1X
SSID Broadcast Enable/Disable
IEEE 802.1X support
Cabling Type
LEDs
UTP CAT 5
Power, PoE, Wireless, Ethernet
Linux
Wireless Client Isolation Wireless Client devices can
be isolated from each other
Operating System
Setup/Config
either within an SSID or
WebUI
Built in Web UI for Easy
browser-based configuration
(HTTP/HTTPS)
between two SSIDs
Quality of Service
QoS
4 Queues
WMM Wireless priority
Management
SNMP Version
Event Logging
SNMP Version 1, 2c, 3
General
E-mail Notification
Remote Syslog
Wireless roaming based on
IAPP
Web F/W Upgrade
Firmware Upgradable
Through Web-Browser
Load Balancing
Auto-channel selection
Diags: Flash, etc.
DHCP
Flash, RAM, LAN, WLAN
DHCP Client
Environmental
Dimensions
8.66" x 6.69" x 1.50"
(220 x 170 x 38 mm)
Operating Modes
Weight
Power
1.69 lb (0.765 kg)
Access Point
Access Point Mode,
point-to-point Bridge Mode,
point-to-multipoint Bridge
Mode, Repeater Mode
12V 1A DC input
and IEEE802.3af Compliant PoE
Max Power Draw: 3.48W
Certification
FCC, ICES-003, CE
Wireless
Operating Temp.
Storage Temp.
14 to 131ºF (-10 to 55ºC)
-22 to 158ºF (-30 to 70ºC)
10 to 90%, Noncondensing
5 to 95%, Noncondensing
Spec/Modulation
Radio and Modulation Type:
802.11b/DSSS, 11g/OFDM
Channels
Operating Channels:
11 North America,
13 Most of Europe
(ETSI and Japan)
Operating Humidity
Storage Humidity
ꢁ8
Wireless-G Access Point with Power Over Ethernet
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty Information
Appendix E
TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT
WILL LINKSYS BE LIABLE FOR ANY LOST DATA, REVENUE
OR PROFIT, OR FOR SPECIAL, INDIRECT, CONSEQUENTIAL,
INCIDENTAL OR PUNITIVE DAMAGES, REGARDLESS OF THE
THEORY OF LIABILITY (INCLUDING NEGLIGENCE), ARISING
OUT OF OR RELATED TO THE USE OF OR INABILITY TO
USE THE PRODUCT (INCLUDING ANY SOFTWARE), EVEN
IF LINKSYS HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. IN NO EVENT WILL LINKSYS’ LIABILITY
EXCEED THE AMOUNT PAID BY YOU FOR THE PRODUCT.
The foregoing limitations will apply even if any warranty or
remedy provided under this Agreement fails of its essential
purpose. Some jurisdictions do not allow the exclusion or
limitation of incidental or consequential damages, so the
above limitation or exclusion may not apply to You.
Appendix E:
Warranty Information
Limited Warranty
Linksys warrants to You that, for a period of three years
(the "Warranty Period"), your Linksys Product will be
substantially free of defects in materials and workmanship
under normal use. Your exclusive remedy and Linksys’
entire liability under this warranty will be for Linksys at
its option to repair or replace the Product or refund Your
purchase price less any rebates. This limited warranty
extends only to the original purchaser.
If the Product proves defective during the Warranty
Period call Linksys Technical Support in order to obtain
a Return Authorization Number, if applicable. BE SURE
TO HAVE YOUR PROOF OF PURCHASE ON HAND WHEN
CALLING. If You are requested to return the Product, mark
the Return Authorization Number clearly on the outside
of the package and include a copy of your original proof
of purchase. RETURN REQUESTS CANNOT BE PROCESSED
WITHOUT PROOF OF PURCHASE. You are responsible
for shipping defective Products to Linksys. Linksys pays
for UPS Ground shipping from Linksys back to You only.
Customers located outside of the United States of America
and Canada are responsible for all shipping and handling
charges.
Please direct all inquiries to: Linksys, P.O. Box 18558, Irvine,
CA 92623.
ALL IMPLIED WARRANTIES AND CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR
A
PARTICULAR
PURPOSE ARE LIMITED TO THE DURATION OF
THE WARRANTY PERIOD. ALL OTHER EXPRESS OR
IMPLIED
CONDITIONS,
REPRESENTATIONS
AND
WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF
NON-INFRINGEMENT,AREDISCLAIMED.Somejurisdictions
do not allow limitations on how long an implied warranty
lasts, so the above limitation may not apply to You. This
warranty gives You specific legal rights, and You may also
have other rights which vary by jurisdiction.
This warranty does not apply if the Product (a) has been
altered, except by Linksys, (b) has not been installed,
operated, repaired, or maintained in accordance with
instructions supplied by Linksys, or (c) has been subjected
to abnormal physical or electrical stress, misuse,
negligence, or accident. In addition, due to the continual
development of new techniques for intruding upon and
attacking networks, Linksys does not warrant that the
Product will be free of vulnerability to intrusion or attack.
ꢁ9
Wireless-G Access Point with Power Over Ethernet
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory Information
Appendix F
Safety Notices
Appendix F:
Regulatory Information
•
•
•
Caution: To reduce the risk of fire, use only No.26 AWG
or larger telecommunication line cord.
Do not use this product near water, for example, in a
wet basement or near a swimming pool.
FCC Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
Thisdevicemaynotcauseharmfulinterference, and(2)this
device must accept any interference received, including
interference that may cause undesired operation.
Avoid using this product during an electrical storm.
There may be a remote risk of electric shock from
lightning.
WARNING: This product contains lead, known
to the State of California to cause cancer, and
birth defects or other reproductive harm. Wash
hands after handling.
This product has been tested and complies with the
specifications for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in
a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not
installed and used according to the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which is found by turning the equipment off and on, the
user is encouraged to try to correct the interference by
one or more of the following measures:
Industry Canada Statement
This device complies with Industry Canada ICES-003 and
RSS210 rules.
Operation is subject to the following two conditions:
1. This device may not cause interference and
2. This device must accept any interference, including
interference that may cause undesired operation of the
device. This device has been designed to operate with
an antenna having a maximum gain of 2dBi. Antenna
havingahighergainisstrictlyprohibitedperregulations
of Industry Canada. The required antenna impedance
is 50 ohms.
•
•
Reorient or relocate the receiving antenna
Increase the separation between the equipment or
devices
•
•
Connect the equipment to an outlet other than the
receiver’s
To reduce potential radio interference to other users,
the antenna type and its gain should be so chosen
that the EIRP is not more than required for successful
communication.
Consult a dealer or an experienced radio/TV technician
for assistance
FCC Caution: Any changes or modifications not expressly
approved by the party responsible for compliance could
void the user’s authority to operate this equipment.
Industry Canada Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits
set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance
20cm between the radiator & your body.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with
minimum distance 20cm between the radiator and your
body.
This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter. IEEE
802.11b or 802.11g operation of this product in the USA is
firmware-limited to channels 1 through 11.
ꢂ0
Wireless-G Access Point with Power Over Ethernet
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory Information
Appendix F
Avis d’Industrie Canada
Cet appareil est conforme aux normes NMB003 et RSS210
Avis de non-responsabilité concernant les
appareils sans fil
d’Industrie Canada.
Les performances maximales pour les réseaux sans fil
sont tirées des spécifications de la norme IEEE 802.11.
Les performances réelles peuvent varier, notamment
en fonction de la capacité du réseau sans fil, du débit
de la transmission de données, de la portée et de la
couverture. Les performances dépendent de facteurs,
conditions et variables multiples, en particulier de la
distance par rapport au point d’accès, du volume du trafic
réseau, des matériaux utilisés dans le bâtiment et du
type de construction, du système d’exploitation et de la
combinaison de produits sans fil utilisés, des interférences
et de toute autre condition défavorable.
L’utilisation de ce dispositif est autorisée seulement aux
conditions suivantes :
1. il ne doit pas produire de brouillage et
2. il doit accepter tout brouillage radioélectrique reçu,
mêmesicebrouillageestsusceptibledecompromettre
le fonctionnement du dispositif. Le dispositif a été
conçupourfonctionneravecuneantenneayantungain
maximum de 2 dBi. Les règlements d’Industrie Canada
interdisent strictement l’utilisation d’antennes dont le
gain est supérieur à cette limite. L’impédance requise
de l’antenne est de 50 ohms.
Afin de réduire le risque d’interférence aux autres
utilisateurs, le type d’antenne et son gain doivent
être choisis de façon à ce que la puissance isotrope
rayonnée équivalente (p.i.r.e.) ne soit pas supérieure
au niveau requis pour obtenir une communication
satisfaisante.
Avis d’Industrie Canada concernant l’exposition
aux radiofréquences :
Ce matériel est conforme aux limites établies par IC
en matière d’exposition aux radiofréquences dans un
environnement non contrôlé. Ce matériel doit être installé
et utilisé à une distance d’au moins 20 cm entre l’antenne
et le corps de l’utilisateur.
L’émetteur ne doit pas être placé près d’une autre antenne
ou d’un autre émetteur, ou fonctionner avec une autre
antenne ou un autre émetteur.
Wireless Disclaimer
The maximum performance for wireless is derived from
IEEE Standard 802.11 specifications. Actual performance
can vary, including lower wireless network capacity,
data throughput rate, range and coverage. Performance
depends on many factors, conditions and variables,
including distance from the access point, volume of
network traffic, building materials and construction,
operating system used, mix of wireless products used,
interference and other adverse conditions.
ꢂꢀ
Wireless-G Access Point with Power Over Ethernet
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory Information
Appendix F
Ceština (Czech) - Informace o ochraně životního
prostředí pro zákazníky v zemích Evropské unie
User Information for Consumer Products
Covered by EU Directive 2002/96/EC on
Waste Electric and Electronic Equipment
(WEEE)
This document contains important information for users
with regards to the proper disposal and recycling of
Linksys products. Consumers are required to comply with
this notice for all electronic products bearing the following
symbol:
Evropská směrnice 2002/96/ES zakazuje, aby zařízení označené
tímto symbolem na produktu anebo na obalu bylo likvidováno
s netříděným komunálním odpadem. Tento symbol udává,
že daný produkt musí být likvidován odděleně od běžného
komunálního odpadu. Odpovídáte za likvidaci tohoto produktu
a dalších elektrických a elektronických zařízení prostřednictvím
určených sběrných míst stanovených vládou nebo místními
úřady. Správná likvidace
a
recyklace pomáhá předcházet
potenciálním negativním dopadům na životní prostředí a lidské
zdraví. Podrobnější informace o likvidaci starého vybavení si
laskavě vyžádejte od místních úřadů, podniku zabývajícího se
likvidací komunálních odpadů nebo obchodu, kde jste produkt
zakoupili.
Dansk (Danish) - Miljøinformation for kunder i EU
EU-direktiv 2002/96/EF kræver, at udstyr der bærer dette symbol
på produktet og/eller emballagen ikke må bortskaffes som
usorteret kommunalt affald. Symbolet betyder, at dette produkt
skal bortskaffes adskilt fra det almindelige husholdningsaffald.
Det er dit ansvar at bortskaffe dette og andet elektrisk og
elektronisk udstyr via bestemte indsamlingssteder udpeget
af staten eller de lokale myndigheder. Korrekt bortskaffelse
og genvinding vil hjælpe med til at undgå mulige skader for
miljøet og menneskers sundhed. Kontakt venligst de lokale
myndigheder, renovationstjenesten eller den butik, hvor du
har købt produktet, angående mere detaljeret information om
bortskaffelse af dit gamle udstyr.
English - Environmental Information for Customers in
the European Union
European Directive 2002/96/EC requires that the equipment
bearing this symbol on the product and/or its packaging must
not be disposed of with unsorted municipal waste. The symbol
indicates that this product should be disposed of separately
from regular household waste streams. It is your responsibility to
dispose of this and other electric and electronic equipment via
designated collection facilities appointed by the government or
local authorities. Correct disposal and recycling will help prevent
potential negative consequences to the environment and
human health. For more detailed information about the disposal
of your old equipment, please contact your local authorities,
waste disposal service, or the shop where you purchased the
product.
Deutsch (German) - Umweltinformation für Kunden
innerhalb der Europäischen Union
Die Europäische Richtlinie 2002/96/EC verlangt, dass technische
Ausrüstung, die direkt am Gerät und/oder an derVerpackung mit
diesem Symbol versehen ist , nicht zusammen mit unsortiertem
Gemeindeabfall entsorgt werden darf. Das Symbol weist darauf
hin, dass das Produkt von regulärem Haushaltmüll getrennt
entsorgt werden sollte. Es liegt in Ihrer Verantwortung, dieses
Gerät und andere elektrische und elektronische Geräte über
die dafür zuständigen und von der Regierung oder örtlichen
Behörden dazu bestimmten Sammelstellen zu entsorgen.
Ordnungsgemäßes Entsorgen und Recyceln trägt dazu bei,
potentielle negative Folgen für Umwelt und die menschliche
Gesundheit zu vermeiden. Wenn Sie weitere Informationen zur
Entsorgung Ihrer Altgeräte benötigen, wenden Sie sich bitte an
die örtlichen Behörden oder städtischen Entsorgungsdienste
oder an den Händler, bei dem Sie das Produkt erworben haben.
Български (Bulgarian)
-
Информация относно
опазването на околната среда за потребители в
Европейския съюз
Европейска директива 2002/96/EC изисква уредите, носещи
този символ върху изделието и/или опаковката му, да не
се изхвърля т с несортирани битови отпадъци. Символът
обозначава, че изделието трябва да се изхвърля отделно от
сметосъбирането на обикновените битови отпадъци. Ваша
е отговорността този и другите електрически и електронни
уреди да се изхвърлят в предварително определени от
държавните или общински органи специализирани пунктове
за събиране. Правилното изхвърляне
и
рециклиране
ще спомогнат да се предотвратят евентуални вредни за
околната среда и здравето на населението последствия. За
по-подробна информация относно изхвърлянето на вашите
стари уреди се обърнете към местните власти, службите за
сметосъбиране или магазина, от който сте закупили уреда.
ꢂꢁ
Wireless-G Access Point with Power Over Ethernet
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory Information
Appendix F
Eesti (Estonian)
Euroopa Liidus asuvatele klientidele
-
Keskkonnaalane informatsioon
Français (French) - Informations environnementales
pour les clients de l’Union européenne
Euroopa Liidu direktiivi 2002/96/EÜ nõuete kohaselt on
La directive européenne 2002/96/CE exige que l’équipement
sur lequel est apposé ce symbole sur le produit et/ou son
emballage ne soit pas jeté avec les autres ordures ménagères. Ce
symbole indique que le produit doit être éliminé dans un circuit
distinct de celui pour les déchets des ménages. Il est de votre
responsabilité de jeter ce matériel ainsi que tout autre matériel
électrique ou électronique par les moyens de collecte indiqués
par le gouvernement et les pouvoirs publics des collectivités
territoriales. L’élimination et le recyclage en bonne et due forme
ont pour but de lutter contre l’impact néfaste potentiel de ce
type de produits sur l’environnement et la santé publique. Pour
plus d’informations sur le mode d’élimination de votre ancien
équipement, veuillez prendre contact avec les pouvoirs publics
locaux, le service de traitement des déchets, ou l’endroit où vous
avez acheté le produit.
seadmeid, millel on tootel või pakendil käesolev sümbol
,
keelatud kõrvaldada koos sorteerimata olmejäätmetega. See
sümbol näitab, et toode tuleks kõrvaldada eraldi tavalistest
olmejäätmevoogudest. Olete kohustatud kõrvaldama käesoleva
ja ka muud elektri- ja elektroonikaseadmed riigi või kohalike
ametiasutuste poolt ette nähtud kogumispunktide kaudu.
Seadmete korrektne kõrvaldamine ja ringlussevõtt aitab vältida
võimalikke negatiivseid tagajärgi keskkonnale ning inimeste
tervisele. Vanade seadmete kõrvaldamise kohta täpsema
informatsiooni saamiseks võtke palun ühendust kohalike
ametiasutustega, jäätmekäitlusfirmaga või kauplusega, kust te
toote ostsite.
Español (Spanish) - Información medioambiental para
clientes de la Unión Europea
Italiano (Italian) - Informazioni relative all’ambiente
per i clienti residenti nell’Unione Europea
La direttiva europea 2002/96/EC richiede che le apparecchiature
La Directiva 2002/96/CE de la UE exige que los equipos que
lleven este símbolo en el propio aparato y/o en su embalaje
no deben eliminarse junto con otros residuos urbanos no
seleccionados. El símbolo indica que el producto en cuestión
debe separarse de los residuos domésticos convencionales con
vistas a su eliminación. Es responsabilidad suya desechar este y
cualesquiera otros aparatos eléctricos y electrónicos a través de
los puntos de recogida que ponen a su disposición el gobierno y
lasautoridadeslocales. Aldesecharyreciclarcorrectamenteestos
aparatos estará contribuyendo a evitar posibles consecuencias
negativas para el medio ambiente y la salud de las personas. Si
desea obtener información más detallada sobre la eliminación
segura de su aparato usado, consulte a las autoridades locales,
al servicio de recogida y eliminación de residuos de su zona o
pregunte en la tienda donde adquirió el producto.
contrassegnate con questo simbolo
sul prodotto e/o
sull’imballaggio non siano smaltite insieme ai rifiuti urbani
non differenziati. Il simbolo indica che questo prodotto non
deve essere smaltito insieme ai normali rifiuti domestici. È
responsabilità del proprietario smaltire sia questi prodotti sia
le altre apparecchiature elettriche ed elettroniche mediante
le specifiche strutture di raccolta indicate dal governo o dagli
enti pubblici locali. Il corretto smaltimento ed il riciclaggio
aiuteranno a prevenire conseguenze potenzialmente negative
per l’ambiente e per la salute dell’essere umano. Per ricevere
informazioni più dettagliate circa lo smaltimento delle vecchie
apparecchiature in Vostro possesso, Vi invitiamo a contattare gli
enti pubblici di competenza, il servizio di smaltimento rifiuti o il
negozio nel quale avete acquistato il prodotto.
ξλληνικά (Greek)
-
Στοιχεία περιβαλλοντικής
προστασίας για πελάτες εντός της Ευρωπαϊκής
Ένωσης
Latviešu valoda (Latvian) - Ekoloģiska informācija
klientiem Eiropas Savienības jurisdikcijā
ΗΚοινοτικήΟδηγία2002/96/ECαπαιτείότιοεξοπλισμόςοοποίος
φέρει αυτό το σύμβολο στο προϊόν και/ή στη συσκευασία
του δεν πρέπει να απορρίπτεται μαζί με τα μικτά κοινοτικά
απορρίμματα. Το σύμβολο υποδεικνύει ότι αυτό το προϊόν θα
πρέπει να απορρίπτεται ξεχωριστά από τα συνήθη οικιακά
απορρίμματα. Είστε υπεύθυνος για την απόρριψη του παρόντος
και άλλου ηλεκτρικού και ηλεκτρονικού εξοπλισμού μέσω των
καθορισμένων εγκαταστάσεων συγκέντρωσης απορριμμάτων οι
οποίες παρέχονται από το κράτος ή τις αρμόδιες τοπικές αρχές.
Η σωστή απόρριψη και ανακύκλωση συμβάλλει στην πρόληψη
πιθανών αρνητικών συνεπειών για το περιβάλλον και την υγεία.
Για περισσότερες πληροφορίες σχετικά με την απόρριψη του
παλιού σας εξοπλισμού, παρακαλώ επικοινωνήστε με τις τοπικές
αρχές, τις υπηρεσίες απόρριψης ή το κατάστημα από το οποίο
αγοράσατε το προϊόν.
Direktīvā 2002/96/EK ir prasība, ka aprīkojumu, kam pievienota
zīme uz paša izstrādājuma vai uz tā iesaiņojuma, nedrīkst
izmest nešķirotā veidā kopā ar komunālajiem atkritumiem
(tiem, ko rada vietēji iedzīvotāji un uzņēmumi). Šī zīme nozīmē
to, ka šī ierīce ir jāizmet atkritumos tā, lai tā nenonāktu kopā ar
parastiem mājsaimniecības atkritumiem. Jūsu pienākums ir šo
un citas elektriskas un elektroniskas ierīces izmest atkritumos,
izmantojot īpašus atkritumu savākšanas veidus un līdzekļus, ko
nodrošina valsts un pašvaldību iestādes. Ja izmešana atkritumos
un pārstrāde tiek veikta pareizi, tad mazinās iespējamais
kaitējums dabai un cilvēku veselībai. Sīkākas ziņas par
novecojuša aprīkojuma izmešanu atkritumos jūs varat saņemt
vietējā pašvaldībā, atkritumu savākšanas dienestā, kā arī veikalā,
kur iegādājāties šo izstrādājumu.
ꢂꢂ
Wireless-G Access Point with Power Over Ethernet
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory Information
Appendix F
Lietuvškai (Lithuanian) - Aplinkosaugos informacija,
skirta Europos Sąjungos vartotojams
Nederlands (Dutch) - Milieu-informatie voor klanten
in de Europese Unie
Europos direktyva 2002/96/EC numato, kad įrangos, kuri ir
kurios pakuotė yra pažymėta šiuo simboliu (įveskite simbolį),
negalima šalinti kartu su nerūšiuotomis komunalinėmis
atliekomis. Šis simbolis rodo, kad gaminį reikia šalinti atskirai
nuo bendro buitinių atliekų srauto. Jūs privalote užtikrinti, kad
ši ir kita elektros ar elektroninė įranga būtų šalinama per tam
tikras nacionalinės ar vietinės valdžios nustatytas atliekų rinkimo
sistemas. Tinkamai šalinant ir perdirbant atliekas, bus išvengta
galimos žalos aplinkai ir žmonių sveikatai. Daugiau informacijos
apie jūsų senos įrangos šalinimą gali pateikti vietinės valdžios
institucijos, atliekų šalinimo tarnybos arba parduotuvės, kuriose
įsigijote tą gaminį.
De Europese Richtlijn 2002/96/EC schrijft voor dat apparatuur die
is voorzien van dit symbool op het product of de verpakking,
niet mag worden ingezameld met niet-gescheiden huishoudelijk
afval. Dit symbool geeft aan dat het product apart moet worden
ingezameld. U bent zelf verantwoordelijk voor de vernietiging
vandezeenandereelektrischeenelektronischeapparatuurviade
daarvoor door de landelijke of plaatselijke overheid aangewezen
inzamelingskanalen. De juiste vernietiging en recycling van
deze apparatuur voorkomt mogelijke negatieve gevolgen voor
het milieu en de gezondheid. Voor meer informatie over het
vernietigen van uw oude apparatuur neemt u contact op met
de plaatselijke autoriteiten of afvalverwerkingsdienst, of met de
winkel waar u het product hebt aangeschaft.
Malti (Maltese) - Informazzjoni Ambjentali għal Klijenti
fl-Unjoni Ewropea
Norsk (Norwegian) - Miljøinformasjon for kunder i EU
EU-direktiv 2002/96/EF krever at utstyr med følgende symbol
avbildet på produktet og/eller pakningen, ikke må kastes
sammen med usortert avfall. Symbolet indikerer at dette
produktet skal håndteres atskilt fra ordinær avfallsinnsamling
for husholdningsavfall. Det er ditt ansvar å kvitte deg med
dette produktet og annet elektrisk og elektronisk avfall via egne
innsamlingsordninger slik myndighetene eller kommunene
bestemmer. Korrekt avfallshåndtering og gjenvinning vil
være med på å forhindre mulige negative konsekvenser for
miljø og helse. For nærmere informasjon om håndtering av
det kasserte utstyret ditt, kan du ta kontakt med kommunen,
en innsamlingsstasjon for avfall eller butikken der du kjøpte
produktet.
Id-Direttiva Ewropea 2002/96/KE titlob li t-tagħmir li jkun fih is-
simbolu fuq il-prodott u/jew fuq l-ippakkjar ma jistax jintrema
ma’ skart muniċipali li ma ġiex isseparat. Is-simbolu jindika
li dan il-prodott għandu jintrema separatament minn ma’ l-
iskart domestiku regolari. Hija responsabbiltà tiegħek li tarmi
dan it-tagħmir u kull tagħmir ieħor ta’ l-elettriku u elettroniku
permezz ta’ faċilitajiet ta’ ġbir appuntati apposta mill-gvern jew
mill-awtoritajiet lokali. Ir-rimi b’mod korrett u r-riċiklaġġ jgħin
jipprevjeni konsegwenzi negattivi potenzjali għall-ambjent u
għas-saħħa tal-bniedem. Għal aktar informazzjoni dettaljata
dwar ir-rimi tat-tagħmir antik tiegħek, jekk jogħġbok ikkuntattja
lill-awtoritajiet lokali tiegħek, is-servizzi għar-rimi ta’ l-iskart, jew
il-ħanut minn fejn xtrajt il-prodott.
Polski (Polish) - Informacja dla klientów w Unii
Magyar (Hungarian) - Környezetvédelmi információ az
európai uniós vásárlók számára
Europejskiej
środowiska
o
przepisach dotyczących ochrony
A 2002/96/EC számú európai uniós irányelv megkívánja, hogy
azokat a termékeket, amelyeken, és/vagy amelyek csomagolásán
az alábbi címke megjelenik, tilos a többi szelektálatlan lakossági
hulladékkal együtt kidobni. A címke azt jelöli, hogy az adott
termék kidobásakor a szokványos háztartási hulladékelszállítási
rendszerektõl elkülönített eljárást kell alkalmazni. Az Ön
felelõssége, hogy ezt, és más elektromos és elektronikus
berendezéseit a kormányzati vagy a helyi hatóságok által
kijelölt gyűjtõredszereken keresztül számolja fel. A megfelelõ
hulladékfeldolgozás segít a környezetre és az emberi egészségre
potenciálisan ártalmas negatív hatások megelõzésében. Ha
elavult berendezéseinek felszámolásához további részletes
információra van szüksége, kérjük, lépjen kapcsolatba a helyi
hatóságokkal, a hulladékfeldolgozási szolgálattal, vagy azzal
üzlettel, ahol a terméket vásárolta.
Dyrektywa Europejska 2002/96/EC wymaga, aby sprzęt
oznaczony symbolem znajdującym się na produkcie i/lub jego
opakowaniu nie był wyrzucany razem z innymi niesortowanymi
odpadami komunalnymi. Symbol ten wskazuje, że produkt
nie powinien być usuwany razem ze zwykłymi odpadami z
gospodarstw domowych. Na Państwu spoczywa obowiązek
wyrzucania tego
i
innych urządzeń elektrycznych oraz
elektronicznychwpunktachodbioruwyznaczonychprzezwładze
krajowe lub lokalne. Pozbywanie się sprzętu we właściwy sposób
i jego recykling pomogą zapobiec potencjalnie negatywnym
konsekwencjom dla środowiska i zdrowia ludzkiego. W celu
uzyskania szczegółowych informacji o usuwaniu starego sprzętu,
prosimy zwrócić się do lokalnych władz, służb oczyszczania
miasta lub sklepu, w którym produkt został nabyty.
ꢂ4
Wireless-G Access Point with Power Over Ethernet
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory Information
Appendix F
Português (Portuguese) - Informação ambiental para
clientes da União Europeia
Slovenčina (Slovene) - Okoljske informacije za stranke
v Evropski uniji
A Directiva Europeia 2002/96/CE exige que o equipamento
que exibe este símbolo no produto e/ou na sua embalagem
não seja eliminado junto com os resíduos municipais não
Evropska direktiva 2002/96/EC prepoveduje odlaganje opreme,
označene s tem simbolom – na izdelku in/ali na embalaži – med
običajne, nerazvrščene odpadke. Ta simbol opozarja, da je treba
izdelek odvreči ločeno od preostalih gospodinjskih odpadkov.
Vaša odgovornost je, da to in preostalo električno in elektronsko
opremo odnesete na posebna zbirališča, ki jih določijo
državne ustanove ali lokalna uprava. S pravilnim odlaganjem
in recikliranjem boste preprečili morebitne škodljive vplive na
okolje in zdravje ljudi. Če želite izvedeti več o odlaganju stare
opreme, se obrnite na lokalno upravo, odpad ali trgovino, kjer
ste izdelek kupili.
separados.
O
símbolo indica que este produto deve ser
eliminado separadamente dos resíduos domésticos regulares.
É da sua responsabilidade eliminar este e qualquer outro
equipamento eléctrico e electrónico através das instalações
de recolha designadas pelas autoridades governamentais ou
locais. A eliminação e reciclagem correctas ajudarão a prevenir
as consequências negativas para o ambiente e para a saúde
humana. Para obter informações mais detalhadas sobre a
forma de eliminar o seu equipamento antigo, contacte as
autoridades locais, os serviços de eliminação de resíduos ou o
estabelecimento comercial onde adquiriu o produto.
Suomi (Finnish) - Ympäristöä koskevia tietoja EU-
alueen asiakkaille
EU-direktiivi 2002/96/EY edellyttää, että jos laitteistossa on tämä
Română (Romanian) - Informaţii de mediu pentru
clienţii din Uniunea Europeană
symboli
itse tuotteessa ja/tai sen pakkauksessa, laitteistoa
ei saa hävittää lajittelemattoman yhdyskuntajätteen mukana.
Symboli merkitsee sitä, että tämä tuote on hävitettävä erillään
tavallisesta kotitalousjätteestä. Sinun vastuullasi on hävittää
tämä elektroniikkatuote ja muut vastaavat elektroniikkatuotteet
viemällä tuote tai tuotteet viranomaisten määräämään
keräyspisteeseen. Laitteiston oikea hävittäminen estää
mahdolliset kielteiset vaikutukset ympäristöön ja ihmisten
terveyteen. Lisätietoja vanhan laitteiston oikeasta hävitystavasta
saa paikallisilta viranomaisilta, jätteenhävityspalvelusta tai siitä
myymälästä, josta ostit tuotteen.
Directiva europeană 2002/96/CE impune ca echipamentele care
prezintă acest simbol pe produs şi/sau pe ambalajul acestuia să
nu fie casate împreună cu gunoiul menajer municipal. Simbolul
indică faptul că acest produs trebuie să fie casat separat de
gunoiul menajer obişnuit. Este responsabilitatea dvs. să casaţi
acest produs şi alte echipamente electrice şi electronice prin
intermediul unităţilor de colectare special desemnate de guvern
sau de autorităţile locale. Casarea şi reciclarea corecte vor ajuta
la prevenirea potenţialelor consecinţe negative asupra sănătăţii
mediului şi a oamenilor. Pentru mai multe informaţii detaliate
cu privire la casarea acestui echipament vechi, contactaţi
autorităţile locale, serviciul de salubrizare sau magazinul de la
care aţi achiziţionat produsul.
Svenska (Swedish) - Miljöinformation för kunder i
Europeiska unionen
Det europeiska direktivet 2002/96/EC kräver att utrustning med
denna symbol på produkten och/eller förpackningen inte får
kastas med osorterat kommunalt avfall. Symbolen visar att denna
produktbörkastasefterattdenavskiljtsfrånvanligthushållsavfall.
Det faller på ditt ansvar att kasta denna och annan elektrisk och
elektronisk utrustning på fastställda insamlingsplatser utsedda
av regeringen eller lokala myndigheter. Korrekt kassering och
återvinning skyddar mot eventuella negativa konsekvenser
för miljön och personhälsa. För mer detaljerad information om
kassering av din gamla utrustning kontaktar du dina lokala
myndigheter, avfallshanteringen eller butiken där du köpte
produkten.
Slovenčina (Slovak) - Informácie o ochrane životného
prostredia pre zákazníkov v Európskej únii
Podľa európskej smernice 2002/96/ES zariadenie
s
týmto
symbolom
na produkte a/alebo jeho balení nesmie byť
likvidované spolu
s
netriedeným komunálnym odpadom.
Symbol znamená, že produkt by sa mal likvidovať oddelene
od bežného odpadu z domácností. Je vašou povinnosťou
likvidovať toto i ostatné elektrické a elektronické zariadenia
prostredníctvom špecializovaných zberných zariadení určených
vládou alebo miestnymi orgánmi. Správna likvidácia a recyklácia
pomôže zabrániť prípadným negatívnym dopadom na životné
prostredie a zdravie ľudí. Ak máte záujem o podrobnejšie
informácie o likvidácii starého zariadenia, obráťte sa, prosím, na
miestne orgány, organizácie zaoberajúce sa likvidáciou odpadov
alebo obchod, v ktorom ste si produkt zakúpili.
WEB: For additional information, please visit
ꢂ5
Wireless-G Access Point with Power Over Ethernet
Download from Www.Somanuals.com. All Manuals Search And Download.
Contact Information
Appendix G
Appendix G:
Contact Information
Linksys Contact Information
Website
E-Mail
ftp.linksys.com
FTP Site
Advice Line
Support
800-546-5797 (LINKSYS)
800-326-7114
RMA (Return Merchandise
Authorization)
949-823-3000
Fax
949-823-3002
NOTE: Details on warranty and RMA issues
can be found in the Warranty and Regulatory
Information section of this Guide.
7081410NC-RR
ꢂ6
Wireless-G Access Point with Power Over Ethernet
Download from Www.Somanuals.com. All Manuals Search And Download.
|