User Manual
Introduction
English
The LINDY KVM Switch Lite HDMI USB is one of the latest generation of KVM switches that
employs HDMI display technology for use with high definition digital monitors and flat screen
TVs. It allows you to control two computers using only one USB keyboard and mouse and one
HDMI or DVI-D equipped monitor. The switch can be used with both PCs and Macs and
supports connection to a USB 2.0 hub which means you can connect and switch your
peripherals too. Switching between computers is achieved using the supplied remote control,
push button, keyboard hotkeys or with the supplied 'KVM Switcher' software.
Package Contents
KVM Switch Lite
HDMI & USB 2.0
°
°
°
°
LINDY KVM Switch Lite HDMI USB
IR Remote Control
°
°
°
5V DC Multi-Country switching PSU
CD-ROM
Instruction manuals
LINDY HDMI Cable x 2
LINDY USB A/B Cable x 2
User Manual
English
Features
The LINDY KVM Switch Lite HDMI USB is a 2-port desktop USB KVM Switch that incorporates
many advanced features:
°
°
Supports HD-Ready digital flat panels, TVs and projectors with HDMI or DVI-D* connections
Supports HDMI or DVI-D* output from PlayStation 3, X-Box as well as PC, Mac and other
HDMI or DVI-D* equipped source devices.
Supports HDMI 1.3 technology for digital video signal transmission of full HD 1080p and
future HDMI 1.3 compliant colour depths as well as DVI-D* display resolutions up to 1920 x
1200.
°
°
°
Supports USB keyboard, mouse and USB 2.0 device sharing when used with an additional
USB 2.0 hub (not supplied).
4 way switching:
ꢀ
ꢀ
ꢀ
ꢀ
IR remote control
Push button on the switch
Keyboard hotkey - user definable
Using the supplied KVM switcher software (Windows and Mac)
* When connecting the switch to DVI-D devices, an appropriate adapter (LINDY No. 41228) or
HDMI to DVI-D cables are required. Visit the LINDY website for further details.
Overscan and Computer video output to TV monitors via HDMI or DVI-D HD-Ready ports
LINDY No. 42339
If you intend to connect a TV then make sure it is capable of supporting the resolution and
refresh rates for your computer’s graphic cards. It may be necessary to adjust the display
properties from within the options menu of your TV to turn off the “Overscan” function if your
display appears incorrect, or cropped. Your TV’s options menu may refer to one of the following
depending on make and model, look for Pixel to Pixel, True Pixel, Full Pixel, Non Scaled,
Underscan, Overscan or similar.
Overscan has been employed by televisions since their introduction. TVs are set to display a
smaller area of the picture than what is received in order to ensure there will not be any black
borders around the picture. This overscan is due to the TV settings and not the devices sending
the signal to the TV. Only the most recent flat screen TVs allow this overscan to be turned off so
check the user guide for your TV for more information.
For Home and Office Use
Tested to Comply with
FCC Standards
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (JUNE 2008)
- 2 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User Manual
English
Radio Frequency Energy, Certifications
Shielded cables must be used with this equipment to maintain compliance with radio frequency
energy emission regulations and ensure a suitably high level of immunity to electromagnetic
disturbances.
KVM Switcher Software
The KVM Switcher Software allows more advanced functions as described in this section:
FCC Warning
Switching
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation.
Windows
Mac OS
Right-click the KVM Switcher icon and select
Switch to PC x
Allthough the dialog box may show a selection for up
to four PCs you can only select/switch to the PCs 1
or 2 on a 2 Port KVM Switch. Also you cannot switch
to a port with no active computer connected (greyed-
out).
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
WEEE (Waste of Electrical and Electronic Equipment),
Recycling of Electronic Products
Configuration
Right-click the KVM Switcher icon and select Settings
or double-click the icon to bring up the configuration
dialog box.
Europe, United Kingdom
In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical and electronic
equipment. It is no longer allowed to simply throw away electrical and electronic equipment. Instead, these products must
enter the recycling process.
Each individual EU member state has implemented the WEEE regulations into national law in slightly different ways. Please
follow your national law when you want to dispose of any electrical or electronic products. More details can be obtained from
your national WEEE recycling agency.
User Hotkey
You can now specify the command key as you like by typing it into the appropriate field. For
example, you can specify the hotkey for switching to PC 1 as CTRL + ALT + “A” by typing an “A”
(not case-sensitive) in the edit field.
Windows
Mac OS
Germany
You can use any standard key on the
keyboard as a hot key, with the
exception of: Alt, Ctrl, Shift, Caps,
Tab, Esc, Functions and Edit keys.
All other keys on the keyboard,
including those number keys on the
number pad may be used.
Die Europäische Union hat mit der WEEE Direktive umfassende Regelungen für die Verschrottung und das Recycling von
Elektro- und Elektronikprodukten geschaffen. Diese wurden von der Bundesregierung im Elektro- und Elektronikgerätegesetz –
ElektroG in deutsches Recht umgesetzt. Dieses Gesetz verbietet vom 24.März 2006 an das Entsorgen von entsprechenden,
auch alten, Elektro- und Elektronikgeräten über die Hausmülltonne! Diese Geräte müssen den lokalen Sammelsystemen bzw.
örtlichen Sammelstellen zugeführt werden! Dort werden sie kostenlos entgegen genommen. Die Kosten für den weiteren
Recyclingprozess übernimmt die Gesamtheit der Gerätehersteller.
France
En 2006, l'union Européenne a introduit la nouvelle réglementation (DEEE) pour le recyclage de tout équipement électrique et
électronique.
If you intend to modify the command
key, you have to modify them on
each of the connected computers,
since the hotkey setting is stored
within each connected computer.
Chaque Etat membre de l’ Union Européenne a mis en application la nouvelle réglementation DEEE de manières légèrement
différentes. Veuillez suivre le décret d’application correspondant à l’élimination des déchets électriques ou électroniques de
votre pays.
Italy
Nel 2006 l’unione europea ha introdotto regolamentazioni (WEEE) per la raccolta e il riciclo di apparecchi elettrici ed elettronici.
Non è più consentito semplicemente gettare queste apparecchiature, devono essere riciclate. Ogni stato membro dell’ EU ha
tramutato le direttive WEEE in leggi statali in varie misure. Fare riferimento alle leggi del proprio Stato quando si dispone di un
apparecchio elettrico o elettronico.
Auto Scan Period
Select the Auto-Scan period from 10
Per ulteriori dettagli fare riferimento alla direttiva WEEE sul riciclaggio del proprio Stato.
~ 60 seconds with an increment of 5 seconds. The Auto-Scan period is the time your KVM
Switch will wait before switching to the next computer. Once you have selected an Auto-Scan
period you can then activate/deactivate this feature from the Operation Menu.
LINDY No 42339
1st Edition, June 2008
6
- 5 -
Download from Www.Somanuals.com. All Manuals Search And Download.
|