™
POWER WAVE WELDING SYSTEMS
™
WITH POWER FEED 10 AND 10 DUAL
Premium MIG Welding Systems
Download from Www.Somanuals.com. All Manuals Search And Download.
TECHNICAL
SPECIFICATIONS
POWER SOURCE
Input Amps at Rated DC Output
208 230 380 415 460 575
Rated DC Output
Amps/Volts/
Product
Name
Ordering
Information
Input AC
Voltage
Output
Range
Weight
(net)
Dimensions
HxWxD
Duty Cycle
Power
Wave
455
K1517-5
208/230/460
3 Phase
50/60 Hz
60 Hz:
450/38/100%
570/40/60%
5-570
Amps
247 lbs. 26 x 20 x 33 in.
70 65
87 82
--
--
--
--
35
48
--
--
(112 kg)
(660 x 508 x
838 mm)
50 Hz:
400/38/100%
500/43/60%
72 67
79 74
--
--
--
--
36
41
--
--
K1517-2
K1517-3
460/575
3 Phase
60 Hz
450/38/100%
570/43/60%
--
--
--
--
--
--
--
--
36
48
30
40
254 lbs.
(115 kg)
380-415 CE
3 Phase
400/36/100%
500/40/60%
--
--
--
--
36
48
33
44
--
--
--
--
5-520
Amps
256 lbs.
(116 kg)
50 Hz
WIRE FEEDER
Wire Speed
Range
IPM (m/min)
Wire Size Range
in. (mm)
Dimensions
H x W x D
in. (mm)
Ordering
Information
Net
Weight
Power Feed 10
Solid
Cored
(1)
62 lbs.
(28.1 kg)
18.5 x 13.5 x 30.5
(1)
BENCH MODEL
K1541-2
K1538-4
Low Speed Gear
50-800 ipm
(1.2 - 20.3 m/min)
.023-3/32
(0.6-2.4)
.035-1/8
(0.9-3.0)
(470 x 343 x 775)
BOOM READY MODELS:
16-18 ft. Generic
.023-1/16
(0.6-1.6)
.035-5/64
(0.9-2.0)
High Speed Gear
75-1200 ipm
(2)
Boom Package
(1.9 - 30.5 m/min)
(4)
12 ft. Zipline Ready Pkg.
K1538-5
K1538-6
(Both gears
included)
(4)
16 ft. Zipline Ready Pkg.
8.5 lbs.
(3.8 kg)
13 x 8.5 x 4
(330 x 216 x 102)
(3)
Control Box Only
K1539-2
K1540-2
30 lbs.
(13.6 kg)
7.6 x 12.9 x 13.7
(193 x 328 x 348)
(3)
Wire Drive Only
Power Feed 10 Dual
Low Speed Gear
50-800 ipm
(1.2 - 20.3 m/min)
.023-3/32
(0.6-2.4)
.035-1/8
(0.9-3.0)
(1)
106 lbs.
(48 kg)
20 x 23 x 34
(1)
BENCH MODEL
K1686-1
K1683-1
(508 x 584 x 864)
.023-1/16
(0.6-1.6)
.035-5/64
(0.9-2.0)
High Speed Gear
75-1200 ipm
(1.9 - 30.5 m/min)
BOOM READY MODELS:
16-18 ft. Generic
(2)
Boom Package
(Both gears
included)
(4)
12 ft. Zipline Ready Pkg.
K1683-2
K1683-3
(4)
16 ft. Zipline Ready Pkg.
54 lbs.
(24.5 kg)
8.8 x 10 x 16.5
(222 x 254 x 419)
(3)
Wire Drive Only
K1685-1
(1) Includes wire drive, control box, 8 ft. Linc-Net™ control
and weld cable, and wire reel stand.
(2) Includes wire drive, control box, 8 ft. and 25 ft. Linc-Net
control cables.
(3) Requires wire drive to control box Linc-Net cable:
For 8-9 ft. boom:
For 10-18 ft. boom:
K1543-16
K1543-25
(4) Boom ready wire feeder for installation on a Zipline boom. See
bulletin E8.201.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
A CLOSER LOOK
Power Feed 10 Dual Control Box
Large, Easy To Read
Digital Meter
Large, Easy To Use
Wire Feed Speed/
Control Amperage
Large, Easy To Use
Voltage/ Trim
Control
Optional Procedure Control
Panel Area
Dual Head Select Panel
(Standard on Power Feed 10 Dual Models)
Optional Process Control
Panel Area
Weld Mode Selector Switch
(Standard on Power Feed 10 and 10 Dual)
SYSTEM
SELECTION
Typical MIG welding systems.
Power Wave 455/Power Feed 10 Dual - Deluxe Pulse
System
Power for those demanding jobs. A dual feeder for running
two different wires from the same power source.
Power Wave 455/Power Feed 10 - Industry Standard
This is the ideal system for MIG and flux-cored welding.
Power Wave 455 power source . . . . . .K1517-5
Power Feed 10 wire feeder. . . . . . . . . .K1541-2
.045 Drive Roll Kit . . . . . . . . . . . . . . . . .KP1505-045S
Power Wave 455 power source . . . . . . . . .K1517-5
Power Feed 10 Dual wire feeder . . . . . . . . .K1686-1
Undercarriage . . . . . . . . . . . . . . . . . . . . . . .K1570-1
MSP2 Pulse Panel . . . . . . . . . . . . . . . . . . .K1542-12
.045 Drive Roll Kit . . . . . . . . . . . . . . . . . . . .KP1505-045S
1/16” Cored Drive Roll Kit . . . . . . . . . . . . . .KP1505-1/16C
(1)
Magnum 400 Gun & Cable asbly . . . . .K471-21
Gas Regulator, Adjustable . . . . . . . . . .K586-1
(1)
Magnum 400 Gun & Cable asbly . . . . . . . .K471-21
Magnum 550 Gun & Cable asbly . . . . . . . .K598-7
Gun Receiver Bushing for Magnum 550 . . .K1500-3
Gun Connector Kit for Magnum 550 . . . . . .K613-7
Power Wave 455/Power Feed 10 - Deluxe Pulse
System
For the ultimate in pulsing performance, this system
provides the options and flexibility needed for multiple
processes and pulsing.
(2)
Gas Regulator, Adjustable . . . . . . . . . . . . . .K586-1
(1)
Fully assembled, no gun connector required.
(2)
Power Wave 455 power source . . . . . .K1517-5
Power Feed 10 wire feeder . . . . . . . . . .K1541-2
Undercarriage . . . . . . . . . . . . . . . . . . .K1570-1
Dual Procedure/Memory Panel . . . . . . .K1542-9
MSP2 Pulse Panel . . . . . . . . . . . . . . . .K1542-12
Swivel Platform . . . . . . . . . . . . . . . . . . .K1557-1
.045 Drive Roll Kit . . . . . . . . . . . . . . . . .KP1505-045S
Two required.
(1)
Magnum 400 Gun & Cable asbly . . . . .K471-21
Gas Regulator, Adjustable . . . . . . . . . .K586-1
4
Download from Www.Somanuals.com. All Manuals Search And Download.
OPTIONAL
CONTROL PANELS
PROCEDURE CONTROL PANELS
POWER FEED 10
DUAL PROCEDURE PANEL
This panel stores two procedures in memory. The user may
select procedure “A” or “B” at the switch with a separate gun
mounted switch, or while welding with any welding gun.
Order K1542-5.
DUAL PROCEDURE / MEMORY
Six different welding procedures and processes may be stored
for recall. Includes Dual Procedure. Memories 2-6 may be
accessed with an “open air” trigger pull using any welding gun.
Order K1542-9.
POWER FEED 10 DUAL
DUAL PROCEDURE / MEMORY
Four welding procedures and processes may be stored for
recall. Includes Dual Procedure for each wire drive. Gun 1 and
2 have 2 procedures each, and each have access to 4 more
from memory.
Order K1542-13.
DUAL HEAD SELECT PANEL
Allows control box (K1539-2) to control two separate wire
drives (K1540-2). Comes standard with Power Feed 10 Dual .
Optional on Power Feed 10.
Order K1542-14
5
Download from Www.Somanuals.com. All Manuals Search And Download.
OPTIONAL
CONTROL PANELS
PROCESS CONTROL PANELS
POWER FEED 10 & 10 DUAL
M PANEL
This optional control panel allows the user to select the type of
output desired: CV-MIG/CV Gas-Shielded, Flux-Cored
(Outershield,Metal-Cored), Flux-Cored (Innershield), or CC-
Stick (Soft)/Gouge. The “Arc Control “ varies inductance in the
CV modes and arc force in the CC-Stick mode.
Order K1542-6.
MX2 PANEL
This optional control panel adds CC-Stick (crisp) mode and a
flexible welding setup.
Shielding gas preflow: 0.1 to 2.5 seconds or OFF.
Run-in wire feed speed: Adjustable for optimum start 75 to 150
inches per minute or OFF.
Arc Control: Inductance control adjusts arc characteristics to
operators preference.
Burnback: Time the arc stays on after the wire feed stops. 0.1
to 0.25 seconds or OFF.
Post Flow: Time the shielding gas flows after the weld stops.
0.1 to 10.0 seconds or OFF.
Crater Fill: Allows a second procedure used in the 4-step
trigger mode. Use for aluminum crater fill welding or a
second procedure.
Order K1542-11.
MSP2 PANEL
This optional control panel has the complete setup selections
of the MX panel. This panel also adds synergic CV and pulse
welding programs. Required to use Wave Designer software.
Order K1542-12.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
NEW WIRE DRIVE
• User can change external speed
range gear quickly. Feeder can be
low speed/high torque or high
speed.
• Incoming bushings are available to
accept guide bushings and conduits
often used with larger pay-off wire
packages.
ADVANTAGES
• Four gear driven rolls. No tools
needed to snap rolls on or off. Each
roll has two grooves of the same
size to double feed life.
• Entire feed head can be removed
for fast, easy servicing. Ideal for
production shops where downtime
must be minimized.
• Simple wire drive roll pressure
adjustment knob with indicator bar.
• Revolutionary Split Wire Guide
precisely aligns and supports wire
through the entire system.
Maximizes support and minimizes
problems.
• Rugged electrically insulated door
protects drive system with simple
positive locking.
• Simple, symmetric design of feed
heads allows for quick removal and
replacement.
• Gun receiver bushing provides low
cost adapters for Magnum or com-
petitive guns, along with easy inter-
changeability, better mechanical
support and reliable electrical
current transfer.
• Two piece split wire guide construc-
tion provides easy access for
inspection, cleaning or changing to
different wire sizes.
• Feed head assembly can rotate to
minimize gun cable kinks and
bends. Reduces gun stresses and
improves feedability.
Drive rolls flip up
for easy access.
Entire wire path
is visible for
easy access.
Changeable
external gear for
quick speed
range change.
Removable
outer wire guide
for easy access
to wire.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
FEED PLATE GUN
RECEIVER BUSHINGS
One of the following Gun Receiver
Bushings is required for connecting
gun and cable assemblies to the
feed plate.
K1500-1 Gun Receiver
Bushing (Optional)
K1500-2 Gun Receiver
Bushing(1) (Standard)
K1500-3 Gun Receiver
Bushing (Optional)
K1500-4 Gun Receiver
Bushing (Optional)
K489-7 Fast Mate Gun
Receiver Bushing
•
•
Magnum 550 gun and cable
assembly with K613-7
connection.
•
•
Magnum 200 and 400 fully
assembled guns (K497-2X
and K471-2X). See below.
•
•
Magnum 200, 300 and 400
gun and cable assemblies
with K466-3 connector kit.
•
Magnum gun and cable
assemblies with Fast Mate
connectors.
•
Magnum 200, 300 and 400
gun and cable assemblies
with K466-1 connector kit.
®
Guns with Tweco #5
connectors.
®
Magnum 200, 300 and 400
gun and cable assemblies
with K466-10 connector kit.
•
•
Lincoln Innershield gun and
Guns with Miller connectors
cable assembly.
(for new, longer connectors).
™
Fast-Mate gun and cable
®
•
Guns with Tweco #2, #3
assembly with K489-2
Fast-Mate Adapter Kit.
and #4 connectors.
(1)
This gun receiver bushing
comes standard with each
feed head.
•
Magnum 550 gun and cable
assembly with K613-1.
K1500-1
K1500-2
K1500-4
K489-7
K1500-3
MAGNUM GUNS
The following guns come pre-assembled
with liner and gun connector that is
compatible with the Tweco #2-#4 gun
receiver bushing (K1500-2). They con-
nect directly to the standard Power Feed
10 and 10 Dual. Gun cables are 15 ft.
length:
K471-21 Magnum 400 .035-.045
K471-22 Magnum 400 .052-1/16”
K471-23 Magnum 400 1/16-5/64”
K497-20 Magnum 200 .025-.030
K497-21 Magnum 200 .035-.045
Feed Plate Gun Receiver
Bushing K1500-X.
Connector Kit for
Magnum Guns
(K466-10 or K613-7)
K1500-2 comes standard with
feed head (as shown).
8
Download from Www.Somanuals.com. All Manuals Search And Download.
DRIVE ROLLS AND
SPLIT WIRE GUIDE KITS
4 Roll, and Split Wire Guide
Solid Steel Wire, Smooth V Groove
.023-.030 (0.6-0.8mm) Solid
.035 (0.9mm) Solid
.040-.045 (1.0-1.2mm) Solid
.052 (1.4mm) Solid
KP1505-030S
KP1505-035S
KP1505-045S
KP1505-052S
KP1505-1/16S
1/16” (1.6mm) Solid
Cored Steel Wire, Knurled V Groove
.030-.035 (0.8-0.9mm) Cored
.040-.045 (1.0-1.2mm) Cored
.052 (1.4mm) Cored
1/16” (1.6mm) Cored
7/64” (2.8mm) Hardfacing (Smooth U Groove)
KP1505-035C
KP1505-045C
KP1505-052C
KP1505-1/16C
KP1505-7/64H
Cored or Solid Steel Wire, Knurled V Groove
.068-.072 (1.8mm)
5/64” (2.0mm)
3/32” (2.4mm)
7/64” (2.8mm) cored only
.120-1/8” (3.2mm) cored only
KP1505-068
KP1505-5/64
KP1505-3/32
KP1505-7/64
KP1505-120
Aluminum Wire, Smooth U Groove
.035 (0.9mm)
.040 (1.0mm)
3/64” (1.2mm)
1/16” (1.6mm)
3/32” (2.4mm)
KP1507-035A
KP1507-040A
KP1507-3/64A
KP1507-1/16A
KP1507-3/32A
For Aluminum Wires
For Solid and Cored Wires
KP1507
KP1505
9
Download from Www.Somanuals.com. All Manuals Search And Download.
TM
• Extension cord flexibility - These
control cables can be connected
end-to-end for length flexibility. A
single, custom length cable is no
longer needed.
Control Cable Only
LINC-NET
K1543-8
8 ft. cable length
K1543-16
K1543-25
K1543-50
K1543-100
16 ft. cable length
25 ft. cable length
50 ft. cable length
100 ft. cable length
CONTROL CABLES
These come standard with both
bench and boom versions of the
Power Feed 10 and Power Feed 10
Dual wire feeders. The Linc-Net con-
trol cable has several advantages over
existing control cables:
• Extended lengths - These cables
can be connected up to 200 ft.
between any 2 components. This
allows more flexibility in locating the
power source and wire feeder.
Control and Weld Cables (4/0 size)
K1544-8
8 ft. cable length
16 ft. cable length
25 ft. cable length
50 ft. cable length
K1544-16
K1544-25
K1544-50
Ordering Information:
• Common cable for all parts - The
same cable can be used between
the power source and wire feeder in
a bench system and between the
power source, control box and wire
drive in a boom system.
Linc-Net Receptacles
Provides Linc-Net receptacles for
converting a Power Feed 10 bench
model to a boom model.
Order K1548-1.
RECOMMENDED
OPTIONS
Plastic Wire Cover
READI-REEL ADAPTERS
SPINDLE ADAPTER
For 14 lb. (6 kg) Innershield Coils
Permits 14 lb. (6 kg) Innershield
electrode coils to be mounted on 2”
(51mm) O.D. spindles. Order K435.
Protects wire from dust and dirt and
provides electrical isolation.
For up to 44 lb. wire packages,
Order K1634-1.
For up to 60 lb. wire packages,
Order K1634-2.
30 lb. (14 kg) Readi-Reel Adapter
Adapts 22-30 lb. (10-14 kg) Lincoln
Readi-Reel coils of electrode to 2”
(51mm) spindle. Order K363P.
COIL ADAPTER
60 lb. Coil Adapter
Water Connection Kit
Adapts 60 lb. Lincoln coils of
electrode to 2” (51mm) spindle.
Order K1504-1.
Includes quick connect fittings on
front and back of wire drive for use
with water-cooled guns and Magnum
Coolers. Kit provides for one gun.
Order K590-6.
K363P
K1504-1
Swivel Platform
Mounts to the lift bail on the power
source and bottom of the Power
Feed 10. Wire feeder may be lifted off
if needed. Compatible with Light Duty
Caster Kit. Includes “lazy susan” parts
tray. Order K1557-1. (Power Feed
10 only.)
60 lb. (27.2 kg) Adapter
Adapts 50-60 lb. (22.7-27.2 kg)
Lincoln Readi-Reel coils of electrode
to 2” (51mm) spindle. Order K438.
K438
K1557-1
10
Download from Www.Somanuals.com. All Manuals Search And Download.
RECOMMENDED
OPTIONS
Caster Kit - Light Duty
Dual Procedure Switch
Undercarriage
Mounts to the wire reel stand on the
Power Feed 10 and Power Feed 10
Dual. Allows for easy movement of
wire feeder. Order K1556-1.
Allows the use of two welding proce-
dures with one Lincoln Magnum gun.
15 ft. (7.6m). Must be used with
optional Dual Procedure Panel or Dual
Procedure with Memory Panel.
Order K683-3.
Platform undercarriage for mounting
two gas cylinders at rear of welder.
Order K1570-1.
K1556-1
K683-3
Insulated Lift Bail
Allows the entire wire
feeder to be hung from
a crane or hook.
Order K1555-1.
(Power Feed
Feed Plate Incoming Bushing
Connects directly to Magnum plastic
conduit (not included), for use in boom
systems, long distances, or large pay-
off packages.
Wire Straightener
For use with 10-Series wire drives or
separately mounted. Straightens
cored wire up to 1/8” (3.2mm) and
solid wire up to 3/32” (2.4mm).
Incoming and outgoing bushings are
compatible with existing incoming and
gun receiver bushings.
10 only.)
For .025-1/16” wire, Order K1546-1.
For 1/16-1/8” wire, Order K1546-2.
Gas Guard Regulator
K1546-1
Order K1733-1.
For CO and Argon blend gases.
2
Reduces surge caused by excess
pressure in supply hose. Includes
adjustable flow regulator with remov-
able adjustor key. Used with standard
regulator. Kit provides for one gun.
Order K659-1.
Undercarriage
K1733-1
Includes mounting frame, front cast-
ers, rear wheels and handle for hand
towing. Order K163.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
SOFTWARE
Wave Designer Pro Software
tracks arc power, arc resistance and
Wave Designer Software
All the features of Wave Designer, plus
Arc Scope™, the arc analysis tool for
those who need to monitor more than
voltage and current. Arc Scope also
energy input. Order K1705-2.
Wave Designer software allows you to
program your own waveforms. It puts
the power of waveform control in your
hands, allowing you to customize
Lincoln’s highly successful welding
waveforms to meet your exact needs.
Once you have made the simple
connection from your PC to your
Power Wave 455, designing a wave-
form is easy.
For more information, request
literature S2.20.
Two software packages are available:
Wave Designer Software
Permits manipulation of several wave
shape parameters including peak
current, background current, peak
pulse width and pulse. Allows for
optimization of arc length.
Order K1705-1.
Customer Assistance Policy
The business of The Lincoln Electric Company is manufacturing and selling high quality welding equipment, consumables, and cutting equipment.
Our challenge is to meet the needs of our customers and to exceed their expectations. On occasion, purchasers may ask Lincoln Electric for
advice or information about their use of our products. We respond to our customers based on the best information in our possession at that time.
Lincoln Electric is not in a position to warrant or guarantee such advice, and assumes no liability, with respect to such information or advice. We
expressly disclaim any warranty of any kind, including any warranty of fitness for any customer’s particular purpose, with respect to such informa-
tion or advice. As a matter of practical consideration, we also cannot assume any responsibility for updating or correcting any such information or
advice once it has been given, nor does the provision of information or advice create, expand or alter any warranty with respect to the sale of our
products.
Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of,
and remains the sole responsibility of the customer. Many variables beyond the control of Lincoln Electric affect the results obtained in applying
this type of fabrication methods and service requirements.
DISTRIBUTED BY:
THE
LINCOLN ELECTRIC
COMPANY
Local Sales and Service through Global
Subsidiaries and Distributors
Cleveland, Ohio 44117-1199 U.S.A
TEL: 216.481.8100
FAX: 216.486.1751
CC/CV Welders
E5.160 12/99
Download from Www.Somanuals.com. All Manuals Search And Download.
|