Lightolier Work Light LDS Series User Manual

LDS Series LED Exit Sign LDS  
Page 1 of 1  
Die-Cast Aluminum Housing  
The LDS Series die cast aluminum exit sign combines traditional styling with reliable self-testing, self-diagnostic technology (optional) ensuring the readiness of your  
emergency lighting and satisfying the periodic testing requirements of NFPA 101, Life Safety Code.  
Side View  
Front View  
1.87”  
(4.7 cm)  
Standard Canopy  
12.67”  
(32.69 cm)  
.63”  
(1.6 cm)  
8.5”  
(21.6 cm)  
5.5”  
(13.97 cm)  
4.38”  
(11.1 cm)  
Complete Fixture consists of base exit sign. Select accessories below.  
How to Specify:  
LDS  
N
U
SERIES  
BATTERY  
STENCIL  
FACES  
LETTER  
COLOR  
STENCIL FACE/  
HOUSING COLOR  
FACTORY-INSTALLED  
OPTION  
LDS = Die Cast Aluminum  
LED Exit  
A = AC Only  
N = Nickel Cadmium  
1 = Single Face  
U = Universal, 2 Faces  
and Backplate  
R = Red  
G = Green  
A = Natural Brushed Aluminum Face w/ Black  
Housing  
B = Black Stencil Face w/ Black Housing  
W = White Stencil Face w/ White Housing  
N = Natural Brushed Aluminum Face w/ Natural  
Brushed Aluminum Housing  
SD = Self-Testing  
Diagnostics  
(Available on nickel cadmium,  
universal face exits only - LDSNU)  
WA = Natural Brushed Aluminum Face w/ White  
Housing  
7. Input Power Requirements: Emergency Operation - Red: 2.88 W; Green:  
3.36 W  
8. Operating Temperature Range: Damp location listed: 50° F (10° C) to  
104° F (40° C).  
9. Emergency Electrical Specifications: Red LED Signs: 120 VAC, 60 Hz,  
0.024 A; 277 VAC, 60 Hz, 0.011 A; Green LED Signs: 120 VAC, 60 Hz, 0.028 A;  
277 VAC, 60 Hz, 0.012 A  
Features  
1. Illumination: Illumination is accomplished with long lasting, high output  
Light Emitting Diodes (LEDs). Hot spots and striations are eliminated by the  
internal light chamber allowing even illumination in normal and emergency  
situations.  
2. Housing: Rugged die cast aluminum housing, back plate, faces and canopy.  
Exits are painted with a durable powder coating in a variety of colors to suit  
any décor.  
10. Warranty: Five year full warranty.  
3. Installation: Exit installation methods are universal. Universal models are  
supplied with two faces, back plate and canopy to easily facilitate back wall  
mount, ceiling and end mount. NFPA approved directional chevron knockouts  
are supplied on the faces. A universal knockout pattern is supplied on the  
back plate to accommodate back wall mount applications.  
4. Electronics: 120/277 VAC, 60 Hz, dual voltage input. Solid state circuitry is  
surge-protected and provides for a reliable charging system. Standard  
features include low voltage disconnect, labor saving AC lockout, brownout  
protection and instantaneous transfer. All circuitry is conformal coated with a  
moisture resistant protector.  
Code Compliance  
UL 924 listed. UL damp location listed. Energy Star compliant. NFPA 101, IEC,  
NEC, OSHA illumination compliant.  
Accessories  
WG4 = Wall Mount Exit Wire Guard  
PKIT12W = Pendant Kit, 12” white finish  
PKIT12B = Pendant Kit, 12” black finish  
NOTE: Consult factory for additional lengths.  
5. Optional Self-Testing Diagnostics: The diagnostics routine is activated  
upon the presence of AC power to ensure proper installation and  
initialization. Continuous monitoring of the systems critical components  
include: Battery disconnect/failure, charger failure, LED failure, AC line  
voltage monitoring and transfer circuit failure. Fault/service monitoring is  
accomplished via a dual color LED on the outside of the unit so there is no  
need to open the fixture if troubleshooting is needed. The self-test routine  
satisfies the exception clause for periodic testing requirements of NFPA 101  
and automatically tests the unit for one minute every thirty days, 30 minutes  
on the sixth month and 90 minutes annually.  
Job Information  
Type:  
Job Name:  
Cat. No.:  
Lamp(s):  
Notes:  
6. Battery: Sealed, maintenance-free nickel cadmium battery. Supplies a  
minimum of 90 minutes of power in the emergency mode. Estimated service  
life of ten years.  
Lightolier a Genlyte Company  
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710  
We reserve the right to change details of design, materials and finish.  
© 2006 Genlyte Group LLC (Lightolier Division) • C0806  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Lenovo Computer Hardware 4466 User Manual
LG Electronics Car Video System W1642S User Manual
LG Electronics Washer WM0742HGA User Manual
Mace Security Camera DVR 9404~9408~9416 User Manual
Magnavox Cassette Player VRZ263AT99 User Manual
Makita Planer KP312 User Manual
Marshall electronic Car Video System V LCD84SB AFHD User Manual
Maytag Dishwasher ADB CDB1500AW User Manual
Memorex Home Theater System MIHT5005 User Manual
Metra Electronics Car Stereo System AW 200GM User Manual