Lightolier Work Light C6E17OHW User Manual

Calculite® HID Downlight C6E17OHW  
Page 1 of 2  
6” Aperture, ED17 (Open Rated), Ceramic Metal Halide, Wide Beam  
Ceiling Cutout: 6 9/16” (167 mm) Dia.  
Reflector Trim  
C6E17OHW CLW  
Frame-In Kit  
Lamp (Coated Ceramic, MH)  
Specular Clear, White Painted Flange.  
Specular Clear, Matching Flange.  
Comfort Clear Diffuse, White Painted Flange.  
Comfort Clear Diffuse, Matching Flange.  
Champagne Bronze, White Painted Flange.  
Champagne Bronze, Matching Flange.  
C670MHOE1 Electronic, 120V  
C670MHOE2 Electronic, 277V  
C610MHOE1 Electronic, 120V  
C610MHOE2 Electronic, 277V  
70W E17, ED17, BD17 (Open Rated)  
70W E17, ED17, BD17 (Open Rated)  
100W E17, ED17, BD17 (Open Rated)  
100W E17, ED17, BD17 (Open Rated)  
CLP  
CCDW  
CCDP  
CCZW  
CCZP  
C670MHOU  
C610MHOU  
Magnetic, 120V/277V 70W E17, ED17, BD17 (Open Rated)  
Magnetic, 120V/277V 100W E17, ED17, BD17 (Open Rated)  
Electrical (cont.)  
Features  
1. Upper Reflector: Clear anodized aluminum, 0.040" (16-ga.). Provides  
wide beam distribution; can be removed for accessibility, inspection and  
maintenance of ballast/junction box assembly.  
Ballast  
ANSI Code Voltage Max. Amps Input Watts  
70W MH M98/M139  
100W MH M90/M140  
120/277  
120/277  
0.67/0.29  
0.90/0.43  
78  
110  
2. Aperture Cone: Provides 55° visual cut-off to lamp and lamp image;  
self-flange in painted white or aperture-matching polished flange. Consult  
factory for other finishes.  
3. Socket Cup: Galvanized steel, pre-wired with medium base pulse rated  
socket. Snaps onto upper reflector for secure attachment without tools;  
unitized construction assures proper lamp alignment to optics for consistent  
performance.  
Magnetic Ballast: 120/277V dual voltage, 60 Hz., encased and potted,  
HX-HPF circuit type, high power factor, sound rating “B”, -20°F minimum  
starting temperature, Type 1 Outdoor rating.  
Ballast  
ANSI Code Voltage Max. Amps Input Watts  
70W MH M98/M143  
100W MH M90/M140  
120/277  
120/277  
1.90/0.80  
2.40/1.10  
94  
125  
4. Mounting Frame: 0.048" (18-ga.) galvanized steel includes pre-installed  
mounting bars.  
5. Mounting Ring: 0.048" (18-ga.) galvanized steel. Designed for vertical  
adjustment from above or below for ceilings from 0" to 2" thick. Center-line  
notches allow consistent alignment of multiple fixtures  
Options and Accessories  
Auxiliary: Add suffix A to Frame-In Kit and Reflector Trim. See Spec.Sheet “A/E”  
Emergency Lamp: Add suffix E to FIK and Reflector Trim. See Spec.Sheet “A/E”  
Slope Ceiling Adapters: See Specification Sheet SCA.  
Fuse (magnetic ballast): Add suffix F1 or F2 to Frame-In Kit (F1=120V F2=277V)  
Chicago Plenum: Consult Factory.  
6. Aperture Cone Retention Springs: Rust resistant springs secure cone in  
place for quick, tool-less installation.  
7. Frame Vertical Adjustment Mechanism: Vertical adjustment mechanism  
accommodates mounting to virtually any ceiling system using pre-installed  
mounting bars, or 1/2" EMT tubing (by others). Single locking feature secures  
all adjustments. Alignment holes and markings allow fixture to be pre-set  
prior to installation.  
Labels  
UL (Suitable for Damp Locations), CSA, I.B.E.W.  
For 100W Electronic, install fixtures with minimum spacing: 2 feet from center-to-  
center of adjacent luminaries; 1/2 inch from top of luminaire to overhead building  
member; 1 foot from luminaire center to side building member.  
8. Mounting Bars: 0.048" (18-ga.) Pre-installed, telescoping bars extend to 30"  
long and lock securely into position. Built-in locking tabs provide positive  
attachment to common T-bar systems. Self-centering feature simplifies  
installation in 24" O.C. grid systems. Attaches to steel or wood joists without  
accessories.  
9. Ballast: Electronic 120V or 277V. Magnetic dual voltage (120V & 277V).  
Accessible from below for inspection and/or replacement without tools.  
10.Junction Box: 0.048" (18-ga.) galvanized steel. UL listed for 8 No. 12 AWG,  
90°C through branch circuit conductors; allows inspection from below.  
11.Thermal Protector: (Not Shown) Meets NEC and UL requirements. Do not  
install insulation above nor within 3" (76mm) of any part of the luminaire.  
Job Information  
Type:  
Job Name:  
Cat. No.:  
Lamp(s):  
Notes:  
Electrical  
Electronic Ballast: 120V or 277V, 50/60 Hz., encased, high-power factor,  
T.H.D. <15%, thermally and transient protected, RMI / RFI complies with FCC  
Part 18 non-consumer equipment, shut-down circuit at end of lamp life, sound  
rating "A", -5°F minimum starting temperature, Type 1 outdoor rating.  
Lightolier a Genlyte Thomas Company  
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710  
We reserve the right to change details of design, materials and finish.  
© 2004 Genlyte Thomas Group LLC (Lightolier Division) • A0504  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Lenmar Enterprises Network Card LAC90 User Manual
Lennox Hearth Stove MPD35ST NM User Manual
Lightolier Indoor Furnishings 1050DRN_3D User Manual
Lindy Network Card ATA 133 User Manual
Lumens Technology Projector DC166 User Manual
Magellan GPS Receiver RV93635T LMB User Manual
Magnavox CD Player AZ 6823 User Manual
Makita Battery Charger DC18RC User Manual
Melissa Kitchen Grill 643 034 User Manual
Microstar Computer Hardware G52 MA00514 User Manual