Calculite® Evolution Open Reflector Downlight C3MRD
Page 1 of 2
3" Aperture, MR16 (12V)
12 5/8"
(321mm)
10
4
2
5
3
6
7
9
8
Non-IC Frame:
C3LV
5" (127mm)
C3LVE1
C3LVE2
Vertical Adjustment
1" (25mm) to
2 3/4" (70mm)
5 1/2"
(140mm)
14 3/8"
(365mm)
9 5/8"
(245mm)
5"
(127mm)
Plus Ceiling
Thk.
Non-IC AirSeal Frame:
C3ALV
5" (127mm)
C3ALVE1
C3ALVE2
14 3/8"
(365mm)
3" (76mm) Dia.
4" (102mm) Dia.
1/2"
(13mm)
2" (59mm) Max.
Ceiling Thk.
1
14 5/8"
(372mm)
10 1/8"
(257mm)
C3LV
IC AirSeal Frame:
C3AICLV
C3ALCLVE1
9"
(229mm)
9 1/2"
(242mm)
Flangeless Trim with
Plaster Ring Accessory
3/16"
84mm)
9" (229mm)
3 3/8" (86mm) Dia.
22 3/8"
(568mm)
1/2" (13mm)
C3AICLV
Ceiling Cutout: 3 1/2" (130mm) Dia.
For Complete Fixture Order: Trim Kit + Frame-In Kit. Each Sold Separately.
Trim Kit
Frame-In Kit
Lamp*
Cone Finish
White Flange
Polished Flange Flangeless
C3LV
Non-IC
Magnetic 120/277V 42W-65W MR16 (12V)
C3LVE1
C3LVE2
C3ALV
C3ALVE1
C3ALVE2
Non-IC
Non-IC
Electronic 120V
Electronic 277V
20W-65W MR16 (12V)
20W-65W MR16 (12V)
Clear
C3MRD CLW
C3MRD CCDW
C3MRD CCZW
C3MRD GDW
C3MRD WHW
C3MRD BKW
C3MRD CLP
C3MRD CCDP C3MRD CCDFT
C3MRD CCZP
C3MRD GDP
N/A
C3MRD CLFT
Comfort Clear Diffuse
Champagne Bronze
Gold
Matte White
Specular Black
Non-IC AirSeal® Magnetic 120/277V 42W-65W MR16 (12V)
C3MRD CCZFT
C3MRD GDFT
C3MRD WHFT
C3MRD BKFT
Non-IC AirSeal® Electronic 120V
Non-IC AirSeal® Electronic 277V
20W-65W MR16 (12V)
20W-65W MR16 (12V)
IC AirSeal®
Magnetic 120V
Electronic 120V
20W-50W MR16 (12V)
20W-50W MR16 (12V)
C3MRD BKP
C3AICLV
C3AICLVE1 IC AirSeal®
Note: Magnetic not recommended for residential or noise sensitive areas.
10. Frame-In Kit: See Frame-In Kit specification sheets for more information.
Non-IC and Non-IC AirSeal - Insulation must be kept 3"away from any parts
of the luminaire and must not be placed above luminaire in a manner which
will entrap heat. IC AirSeal - Luminaire may be in direct contact with thermal
insulation.
Features
1. Trim Kit Aperture Cone: Low brightness; 0.040" aluminum, anodized;
50° visual cut-off to lamp and lamp image. Hinged, and snaps on for easy
tool-less installation. Self-flange in painted white or aperture matching
polished flange. Flangeless trim used with Plaster Trim Ring accessory.
Interchangeable with other 3" Evolution trims.
Options and Accessories
2. Lamp Support: Die-form aluminum with knurled surface for easy gripping
during relamping. Spring tension clips hold lamp and lens and allow fast
snap-in, snap-out relamping. Matte black finish. Accepts up to two 2" diam-
eter accessories.
2" dia. Color Filters/Specialty filters: See ADF2/AF2 specification sheets
2" Dia. Louver: AL2HC
Plaster Trim Ring (use with flangeless trim): CA3FMR
Chicago Plenum: Consult Factory
3. Cover Glass: High temperature, soft focus lens.
4. Thick Ceiling Ready Brackets: Die-form steel, matte black finish. Adjust
trim kit vertically to accommodate up to 2" thick ceiling, lockable.
5. Lampholder: Procelain bi-pin socket. Pre-wired with No.18 AWG Teflon
leads.
6. Horizontal Adjustment Mechanism: Built-in ready for adjustable trim,
matte black finish.
7. Frame Vertical Adjustment Mechanism (C3LV): Accommodates mount-
ing to virtually any ceiling system using pre-installed mounting bars, or 1/2"
EMT tubing (by others). Single locking features secures all adjustments.
Alignment holes and markings allow fixture to be pre-set prior to installation.
Final adjustment can be made from below inside fixture.
Labels
U.L. (Suitable For Damp Locations), I.B.E.W.; U.S. & Foreign Patents Pending
*Lamp wattage restriction for Non-IC: 65W for up to 1" thick ceiling, 50W for
ceiling thickness greater than 1" (up to 2").
Job Information
Type:
Job Name:
Cat. No.:
8. Mounting Bars (C3LV): Galvanized steel, 0.048"; pre-installed telescoping
bars extend from 20" to 30" long and lock securely into position. Built-in lock-
ing tabs provide positive attachment to common T-bar systems. Self-center-
ing feature simplified installation in 24"O.C. grid systems. Attaches to steel
or wood joists without accessories.
Lamp(s):
Notes:
9. Transformer: Replaceable from below. Magnetic: 120V/277V 60 Hz. dual-
voltage, core & coil. Note: Magnetic not recommended for residential or
noise sensitive areas. Electronic: 120V or 277V 50/60 Hz., regulated lamp
voltage, HPF, EMI and circuit protections, thermal auto-reset, quiet operation.
Lightolier a Genlyte company
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2007 Genlyte Group LLC • E1107
Download from Www.Somanuals.com. All Manuals Search And Download.
|