LES 780iR INFRARED CLASSROOM
AMPLIFICATION SYSTEM
U S E R ’ S M A N U A L
Download from Www.Somanuals.com. All Manuals Search And Download.
LES 780iR Infrared Classroom Amplification System:
Overview
e LES 780iR Infrared Classroom
e LT-70 LightMic is a wireless, pendent-
Amplification System includes the LES
780iR receiver/amplifier, LT-70 Light Mic™
microphone/transmitter, SR-70 infrared
sensor and speaker package. is system
allows teachers to speak at a normal conver-
sational level while being heard clearly by
every student in the classroom.
style microphone/transmitter. is two-
channel, rechargeable microphone
is clipped to a lavaliere cord and worn
around the neck or held like a
standard microphone.
e LES 780iR is a two-channel receiver/
amplifier that allows the use of two micro-
phones and up to four audio input sources.
In addition, up to six speakers can be con-
nected to the LES 780iR, ensuring that no
matter the size or shape of the room, every
child hears every word—every time.
[1]
Download from Www.Somanuals.com. All Manuals Search And Download.
LES 780iR Classroom Amplification System Components:
LES 780iR Receiver/Amplifier
™
Power Supply
RCA Cables
Speaker(s)
LT-70 LightMic
Microphone/Transmitter
SR-70 Infrared Sensor Cable
SR-70 Infrared Sensor
Various speakers are available and are
typically shipped in a separate box with
plenum-rated speaker wire.
[2]
Download from Www.Somanuals.com. All Manuals Search And Download.
System Installation
1. Unpacking Your System
3. Speaker(s)
•
Ensure that you have received all of
the components to your system.
•
Locate the speaker installation
instructions packed with your
speaker(s).
•
Locate the speaker installation
instruction sheet that is packed with
your speakers.
•
•
Follow instructions and mount
speakers(s).
•
Keep ALL packaging materials.
If the system must be returned, it
will be quick, convenient and
undamaged.
Return to the LES 780iR manual to
complete the set up of your system.
4. Receiver/Amplifier
•
Place the LES 780iR on a flat surface
like a bookcase or countertop.
2. Location
Before installing the system, take time
to consider the placement of your
components.
•
Ensure that the A VOLUME
and B VOLUME knobs are
turned all the way down (fully
counter-clockwise) and the POWER
switch is the OFF position.
•
Infrared (IR) Sensor: Consider areas
of dark color in the room as they
reflect less infrared light. Sensor
mounting locations should be closer
to dark areas to improve reception.
•
Connect the speaker wire(s) to the
appropriate 1/4” SPEAKER OUT
jacks on the back of the LES 780iR.
(Refer to your speaker instructions
for additional information.)
•
•
Receiver: Place on flat surface close
to standard electrical outlet.
Speaker: Refer to the speaker
installation sheet that is included
with the speaker for placement
needs.
•
•
Plug the power cord into a standard
110 V electrical outlet and attach the
other end into the DC POWER jack
on the back of the LES 780iR.
•
Speaker Wire and Sensor Wire:
Plenum wire is included for
Switch the power on the front
panel to the ON position. e red
power indicator on the switch
will light.
each. Ensure the wire length will
cover the area from where you hang
the sensor and speaker(s) to where
you place the receiver. It’s optimal to
route wire overhead (above ceiling
tiles) if possible. In addition, wire
can be routed down the wall and
around the room perimeter secured
with heavy staples or wire raceway.
[3]
Download from Www.Somanuals.com. All Manuals Search And Download.
b. Wall or Solid Ceiling Mount
5. IR Sensor Placement
Sensor location is very important for
optimum performance of the LES 780iR
Classroom Amplification System. Place
the sensor in a temporary location and test
the system (Step 7 below) before choosing
a permanent location. Test the mic at the
farthest points from the sensor to confirm
signal is clear throughout the classroom.
(Dark surfaces reflect less infrared light and
may hinder signal transmission.)
•
•
Screw the plastic mounting strip
on to a place high on the wall or in
the middle of the solid ceiling.
a. Suspended Ceiling Mount
Firmly snap the C-clip on the back
of the IR sensor onto the plastic
mounting strip with the sensor plug
hanging down (if a wall mount) or
toward the receiver location (if
ceiling mount).
•
Uncoil the sensor wire. Insert sensor
plug into the female end of the
sensor wire. Loosely secure wire
overhead and route it back to
the LES 780iR.
• Lift the ceiling tile nearest the grid rail in
your desired sensor location. Guide one
side of the C-clip over one edge of the
grid rail. Providing firm support to the
back of the grid rail with one hand (to
prevent bending), firmly and carefully
snap the second side of the C-clip over
the edge of the rail.
•
•
Connect sensor wire to any of the
six sensor inputs on the back of
the LES 780iR.
Complete Step 7 (testing) to confirm
optimum sensor location and
permanently secure wire from the
sensor back to the LES 780iR.
• Uncoil sensor wire. Insert sensor wire
jack into sensor plug. Loosely secure
wire overhead and route it back to
the receiver.
[ note: ]
e LightMic rechargeable batteries come
installed at the factory. ere is enough charge
within the LightMic batteries to adequately
test the system during initial setup. However,
the batteries need to be charged for 8 or more
hours before regular use for optimum battery
life.
• Plug into any of the six sensor inputs on
the back of the LES 780iR.
• Complete Step 7 (Testing) to confirm
optimum sensor location, and perman-
tently secure sensor wire from the sensor
back to the receiver.
[4]
Download from Www.Somanuals.com. All Manuals Search And Download.
6. LightMic Microphone/
Transmitter
[ note: ]
e system can generate feedback (a squealing
or howling sound) if there is too much volume
or the equalization (EQ) levels are incor-
rectly set. Adjust the three EQ level knobs if
necessary to eliminate feedback and to obtain
a natural sound.
For testing purposes, basic instructions
for wearing and operating the LightMic
are provided below. For more detailed
instructions, refer to page 11.
•
•
Clip the LightMic to the lavaliere.
•
With volume and EQ levels set, walk
around the room, paying special
attention to the areas farthest from
the IR sensor. Your voice should
remain clear and intelligible.
Place the LightMic and lavaliere cord
around your neck and adjust cord
length so the top of the LightMic sits
just below your collar bone.
•
•
Slide the ON/OFF switch on the
LightMic to ON. e red power
indicator will light.
•
Consult the troubleshooting guide
for further assistance.
Slide the channel select switch to “A.”
7. Testing
Test the system to ensure everything is
correctly connected and working proper-
ly before your first full day of use. A
second person is helpful to listen and
ensure your voice is clear but not loud.
•
With the LightMic positioned
properly around the neck, speak
normally and turn the A VOLUME
clockwise until an optimum voice
level is achieved. You may not be able
to hear your own voice when this is
properly set. However, your
students will.
[5]
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel Controls
3
5
4
2
1
1. POWER Switch/POWER Indicator:
is switch is used to turn the LES 780iR
ON (switch up), or OFF (switch down).
When the POWER switch is in the ON
position, the red POWER light
will glow.
4. A VOLUME: Controls the volume
level of the microphone/transmitter
that is switched to Channel A.
Rotating the knob clockwise
increases output level.
5. B VOLUME: Controls the volume
2. IR 1/IR 2: e IR indicators (IR 1/IR 2)
will glow red when the corresponding
microphone is turned on. is light
confirms the LES 780iR is receiving the
infrared signal.
level of the microphone/transmitter that
is switched to Channel B. Rotating the
knob clockwise increases output level.
3. AF 1/AF 2: e AF indicators (AF 1/AF 2)
flash green when audio (voice) from the
microphone is dectected.
7
6
6. VOLUME (TV/VCR, CD/TAPE,
COMPUTER, AUX): ese knobs
control the volume of various audio
sources that are connected to their
corresponding input jacks on the
back panel.
7. SPEAKERS (1-6/OFF): ese ON/OFF
switches turn the corresponding
speaker (connected to the same
numbered jack on the back of the unit)
on or off. is is used for “zoning”
multiple speakers within the classroom.
[6]
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Panel Controls
1
7. FILTERS: ese speaker filters are cov-
ered with a speaker indicator label and
are factory preset for optimum perfor-
mance. If you have any questions about
these filters or their settings please
call LightSPEED.
2
1. SPEAKERS (1-6) Volume Controls:
ese knobs control the output volume
of each corresponding speaker. e
volume level is preset in the middle
position at the factory. LightSPEED
recommends leaving the volumes at
this level for uniform sound throughout
the classroom.
8
9
8. AUDIO INPUTS (TV/VCR,
CD/TAPE, COMPUTER, AUX):
ese RCA input jacks receive audio
input from external audio sources
(TV/VCR, CD/tape, computer, etc).
2. SPEAKER OUTPUT (1-6): ese 1/4”
jacks are used to connect speaker cable
from the loudspeakers to the LES 780iR.
9. EQUALIZATION: e three frequency
equalization adjustments are factory set
for normal classroom environment.
5
4
7
•
•
•
LOW: Controls low-frequency.
MID: Controls mid-frequency.
HIGH: Controls high-frequency.
3
6
3. DC POWER: e LES 780iR uses
an AC to DC power converter to supply
power to the amplifier.
11
10
4. FM OUT & AUX OUT: ese output
jacks send the processed signal to
external equipment—for example, a tape
recorder or an assistive listening device
like LightSPEED’s LES 370 Personal
FM System.
10. SENSOR INPUTS: e cable from
the IR sensor connects to any of these
six inputs. Up to six IR sensors can be
connected to the LES 780iR for use in
large or odd shape classrooms.
5. ADJ: ese knobs control the output
level of the audio source being sent out
of the unit via the FM OUT & AUX
OUT jacks.
11. SENSOR SHORT: If there is a short in
one of the sensor cables, this LED glows
as a warning signal.
6. MIC CHARGE: ese jacks are
used to connect the charging cable to the
LightMic or a handheld microphone
for daily battery charging.
[7]
Download from Www.Somanuals.com. All Manuals Search And Download.
System Operation:
Powering the LES 780iR
Check that:
a.
a
Both front panel microphone volume controls
(A VOLUME and B VOLUME) are turned all the
way down (fully counter-clockwise).
b.
Individual speaker switches are in the
on/up position.
b
c
c
e LES 780iR is connected to a power source. Use the
enclosed AC/DC power adaptor to plug into a standard
electrical outlet and connect the other end to the DC
POWER jack on the back panel.
d. Individual SPEAKERS volume knobs on
d
back panel are set at a 12 o’clock position.
d. e power switch located on the left side of the
e
front panel of the LES780iR is in the up position
(ON). e red POWER light on the POWER switch
will light when the LES 780iR is on.
[8]
Download from Www.Somanuals.com. All Manuals Search And Download.
™
LT-70 LightMic Microphone/Transmitter:
Controls and Connections
Microphone
External
Microphone
Connector
(MIC)
Clip
ON/OFF
4
1
Switch
3
Power/
Channel
Charge
Select
2
5
LED
Switch
Charging
Indicator
(CH A/B)
Connector
(CHARGER)
1. ON/OFF Switch: is switch,
located on the side of the LightMic,
turns the unit on or off. e red
triangle-shaped LED on the front
of the LightMic will light when
power is on.
4. External Microphone Connector (MIC):
Use the 3.5 mm MIC jack for the optional
TK-250 headset microphone.
5. Charger Connector (CHARGER): Use
the jack labeled CHARGER to connect the
charging cable from the LES 780iR to the
LightMic for daily battery recharging.
2. Channel Select Switch (CH A/B):
is switch allows for selection
between Channel A or B. If you
are using a single microphone/
transmitter for your system, we
recommend using Channel A.
3. Power/Charge LED Indicator:
is triangle-shaped LED is two-
color. It glows red when the LightMic
is powered on, green when charging
and goes out when fully charged.
[9]
Download from Www.Somanuals.com. All Manuals Search And Download.
Charging the LightMic
e rechargeable NiMH
batteries must be fully charged
before regular classroom
operations.
1. Ensure the LightMic is turned OFF.
e LES 780iR must be connected
to AC power in order to charge the
LightMic.
However, do not leave the LightMic plugged
into the charger for more than 10 days, as it
will significantly shorten battery life.
6. Once the batteries are charged,
remove the charging cable from
the LightMic.
2. e LightMic’s rechargeable batteries
are factory installed. Plug one end of
the charging cable firmly into the jack
labeled CHARGER on the side of the
LightMic. Connect the other end of
the charging cable to one of the MIC
CHARGE jacks on the back of the
LES 780iR.
7. NiMH batteries will maintain their
charge for a full day of normal
classroom use.
8. With proper care, NiMH batteries
will provide service for at least one
year. If battery or charging problems
occur, contact LightSPEED Service at
800.732.8999.
3. e triangle-shaped light on the
front of the LightMic transmitter
glows green when the cable is
connected and charging correctly.
e light goes out when fully charged.
[ caution! ]
4. e batteries will fully charge in
8 to 12 hours.
Do not attempt to charge alkaline
batteries̶they can overheat and
expand, creating a significant hazard
5. It is best to leave the LightMic
charging until used, since the
batteries slowly lose their charge
when not in use.
and damaging the LightMic.
(is is not covered by the warranty.)
[10]
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the LightMic
a. e LightMic has a built-in microphone.
Once the transmitter is switched on, the
microphone is activated.
d. Speak at a normal level and slowly
turn the volume knob clockwise to
increase the loudness of the speaker(s)
until the sound level is adequate for
the room.
b. e LightMic may be used as a hand-
held mic or a hands-free pendent style
microphone by clipping the LightMic
on the supplied lavaliere cord.
[note:]
Feedback or “squealing” may occur if the
volume is set too high. Reducing the loudness
of the speakers with the volume control
usually eliminates feedback.
Place the lavaliere cord around your neck,
and adjust the length so the top of the
LightMic rests on the collar bone.
Operating two microphone/
transmitters simultaneously
c. On the side of the LightMic is the Chan-
nel select switch. Slide the switch to
the “A” position. (If a second LightMic
is used for simultaneous operation, set
one LightMic to Channel A and the
second LightMic to Channel B.)
e LES 780iR has two independent
receivers—Channel A and B. is makes it
possible to operate two microphones simul-
taneously. Follow the instructions below
when using a second microphone:
d. Slide the ON/OFF switch on the side of
the LightMic to ON. e triangle-
shaped light on the front glows red,
indicating the microphone is charged
and ready for use.
a. Set each microphone/transmitter to
separate channels. For example if
you are using two LightMics, set one
to Channel A and the other to
Channel B. If you are using one
LightMic and one HM-70 handheld
microphone, set the LightMic to
Channel A and the HM-70 to
Channel B.
e. When the LightMic transmitter
ON/OFF switch is slid to OFF, the
microphone power is turned off.
Adjusting Volume
Volume is set by adjusting the volume control
on the LES 780iR.
When the LES 780iR is receiving a signal
from the microphone/transmitters:
a. Ensure the LES 780iR is switched ON.
• IR 1 indicator to the left of the A
volume knob will glow red on the
LES 780iR when Channel A on the
LightMic is selected
b. Ensure the LightMic is switched ON and
the triangle-shaped LED on the front of
the LightMic is glowing red. e IR 1
LED next to the A VOLUME knob on
the LES 780iR will also glow, indicating
that the LES 780iR is receiving the
• e IR 2 indicator light to the left of the
B VOLUME knob will glow red
when Channel B is selected.
LightMic signal and is ready for use.
• When simultaneously operating two
microphone/transmitters, both
indicator lights will glow.
c. Adjust the volume of the receiver by
turning A VOLUME clockwise.
[11]
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional HM-70 Handheld
Microphone/Transmitter:
Overview
HM-70 Controls
1. Power Switch: is 3-position
switch allows you to turn the micro-
phone on (up position), mute the
microphone (middle position), and
turn off the microphone (down posi-
tion). e red LED above the switch
lights when the switch is in the
e HM-70 handheld microphone/
transmitter is an optional microphone
that can be ordered from LightSPEED.
It can be used alone or in tandem with the
LT-70 LightMic.
“mute” or power “on” positions.
2. Channel Select Switch: is switch
allows you to choose between Channel
A or Channel B. is switch is set to
Channel B at the factory.
Power/Charge LED
3
Indicator
3. Power/Charge LED Indicator: is
two-color LED indicator is located
directly above the power switch. It
glows red when the HM-70 is powered
on and glows green when charging.
Power Switch
1
slide to open
4. Charger: Use this jack to connect the
charging cable from the 780iR to the
HM-70 for daily battery recharging.
4
Battery
Charging Jack
Compartment
[ caution! ]
Channel Select Switch
2
Do not attempt to charge alkaline
batteries̶they can overheat and
expand, creating a significant hazard
and damaging the LightMic.
(is is not covered by the warranty.)
Gain Adjust
top view of battery compartment
[12]
Download from Www.Somanuals.com. All Manuals Search And Download.
HM-70 Operating Instructions
Charging
Operation
e Channel A/B switch is located inside
the battery compartment. e switch is set to
Channel B at the factory.
Rechargeable batteries are pre-installed.
a. Turn off the HM-70 by sliding the
power switch all the way down.
a. Slide the power switch on the side of
the HM-70 all the way up. e power
indicator LED will glow red and stay on.
(ere is a center MUTE position if you
wish to leave power on but temporarily
cease transmission of your voice.)
b. Connect one end of the charging cable
to one of the MIC CHARGE jacks on
the back panel of the LES 780iR.
Connect the other end of the charging
cable to the charging jack on the side of
the HM-70. e power indicator LED
will glow green when the charging
cable is connected and charging
correctly.
b. Do not adjust the audio gain adjuster
that is located in the battery compart-
ment. It has been preset by factory
technicians and is not intended as a
volume control.
c. e batteries fully charge in 8 to 12
hours. Once the batteries are charged,
remove the charger cable from the
HM-70.
Holding and Positioning
a. When holding the HM-70, grip the
barrel in the center, silver section
NiMH batteries maintain their charge for
a full day of normal classroom use. Always
turn the HM-70 off when not in use.
below the power switch. Do NOT
grip the HM-70 around the bottom,
covering the black infrared sensors
encircling the base. is interrupts
signal transmission from the microphone
to the receiver. Speak directly into the
top of the microphone at a normal level,
holding the head about 2 inches from
your mouth, no lower than chin height.
[13]
Download from Www.Somanuals.com. All Manuals Search And Download.
Input from External
Audio Equipment
While LightSPEED recommends leaving the
speaker volume set in the middle position
to maintain a uniform sound, there may be
times when separate volume adjustments are
necessary.
Below are instructions on how to connect
an external audio device like a TV/VCR,
CD/DVD, cassette player, or projector.
Turning Speakers On and Off
1. Connect an RCA cable from the
audio source to one of the four (4)
AUDIO INPUT jacks on the back of
the LES 780iR using an RCA-type male
connector. If the audio source produces
a stereo signal, a stereo to mono adapter
is required (Part # AC-STM-ADPT).
1. Ensure that the LES 780iR is turned off
and that A and B VOLUME
are turned down.
2. Turn the corresponding SPEAKERS
(1-6)/OFF switch(es) on the front
panel to the on (up) position.
2. With the LES 780iR on, adjust the cor-
responding volume knob on the front
to a desired level.
3. Turn the LES 780iR on and slowly turn
up the level of A VOLUME. Walk
around the classroom speaking into the
mic at a normal level and ensure that the
desired volume is coming from each
speaker. Do the same with B VOLUME
if using a second LightMic.
Output to Personal
FM Transmitter
1. Using a cable with a 3.5 mm connector
at one end, connect the FM OUT or
AUX OUT to the input jack of an FM
transmitter, recorder, or other device.
It is important to determine the size and
type of audio input jack on the device as
many manufacturers’ products differ.
e LightSPEED LES-370 requires the
CA-MMC3535 cable.
Controlling the Volume of
the Individual Speakers
An area of the classroom may contain a
noise emitter such as an HVAC system. In
this case, it may be necessary to turn up the
volume of the affected speaker to overcome
the noise in that area.
2. With the LES 780iR turned on, adjust
the FM OUT or AUX OUT volume
on the back of the LES 780iR to a
desired level.
When his situation arises, the LES 780iR
allows the user to fine tune the output level:
1. Locate the speaker volume control knobs
on back panel (SPEAKER 1-6) above
the speaker outputs.
Speaker Control
e LES 780iR has six individual speaker
outputs, each with its own on/off switch
and volume control. By “zoning” or sepa-
rating the classroom into different
areas where audio may or may not be de-
sired, the teacher has greater flexibility
controlling the dispersion of sound
2. If possible, have a second person stand
by the speaker(s) needing adjustment.
3. Speak into the mic at a normal level
and adjust the corresponding speaker
volume control(s) (SPEAKER 1-6) to a
desired level.
throughout the room. Zoning is especially
useful in large or odd-shaped classrooms.
Turning speaker volume too high can result in
feedback when walking under speaker.
[14]
Download from Www.Somanuals.com. All Manuals Search And Download.
Tips on Using Classroom
Amplification
Five-Year Limited Warranty
to Original Purchaser
ese helpful suggestions are provided
to maximize the successful use of
your new LES 780iR Infrared Classroom
Amplification System.
e LightSPEED LES 780iR Infrared
Classroom Amplification System is war-
ranteed against malfunction due to defects
in materials and workmanship for a period
of five years beginning at the date of the
purchase. Batteries and the optional TK-
250 Headset Microphone are guaranteed
for one year. Products will be repaired or
replaced at LightSPEED’s option during
the warranty period.
• Speak in a natural voice. A normal
conversational speech level will provide
an adequate signal. It is not necessary to
increase the intensity of your voice—the
amplification system provides adequate
amplification (approximately 5 - 10 dB)
above ambient room noises.
Warranty does not extend to finish, ap-
pearance, or malfunctions due to abuse or
misuse. Repairs performed by any other
than LightSPEED will void this warranty.
Our Service Department (800.732.8999,
7 a.m. – 5 p.m., PST) will handle
• Avoid wearing jewelry that may rub or
bump against the microphone.
• Turn the LightMic off during private
conversations with a student, parent, or
other classroom visitor. You can also
cover the LED lens on top of the
LightMic to block the signal.
all your repair/replacement needs.
If you review these instructions and still
have questions, write down the serial
number and model number of your system
and call LightSPEED Technical Services at
800.732.8999, 7 a.m. - 5 p.m. PST.
• Recharge batteries each night. When
recharged nightly, operating time
(actual usage) for the transmitters will
last through a typical school day. Your
rechargeable batteries will last for a
normal school year when cared
for properly.
[ caution! ]
Do not attempt to charge alkaline
batteries̶they will overheat and expand,
creating a significant hazard and damaging
the transmitter. (This type of damge is not
covered under warranty.)
[15]
Download from Www.Somanuals.com. All Manuals Search And Download.
Overall System Specifications:
Carrier Frequencies (IR)
Frequency Stability
Maximum Deviation
Dynamic Range
2.06/2.54 MHz
+/‒ 3%
+/‒ 50 kHz
> 80 dB
Signal-to-Noise Ratio
Frequency Response
> 90 dB
40 Hz - 20 kHz (‒ 3 dB)
Receiver Specifications:
Receiver Type
Superheterodyne
6 µV for 60 dB S/N ( > 25 dBuV)
> 40 dB
Receiver Sensitivity
Image and Spurious Rejection
Reception Selectivity
Squelching
40 kHz
Threshold 3.2 µV
Amplifier Specifications:
Power Output (System Total)
Total Harmonic Distortion
Speaker Load Impedance
Power Supply (UL Listed)
Dimensions
12 W per channel (72 W)
< 1% @ 20 W
4 Ohms
24 V/2.5 A
18 x 9 x 3 (H x W x D inches)
7 lbs.
Weight
Inputs:
TV/VCR
RCA ‒ Line Level
RCA ‒ Line Level
RCA ‒ Line Level
RCA ‒ Line Level
“F” Connector
CD/Tape
Computer
Auxiliary
IR Sensors (6)
Outputs:
Auxiliary Outputs (2)
3.5 mm
1/4”
Speaker Outputs (6)
Transmitter Specifications:
Audio Distortion
Spurious Emissions
Built-in Microphone
Battery Power (1-year warranty)
Dimensions
< 1%
< 30 dB
Uni-directional Electret
2 AA NiMH Rechargeable
1.4 x 1 x 4.6 (W x D x H inches)
3.04 oz (w/batteries)
Weight
External Sensor:
Power
By Receiver Unit
360 º, Ceiling-mount
40 ft., Plenum-rated Co-ax
Ceiling clip/Wall bracket
32
Reception Coverage
Cable
Mounting
Diodes
[16]
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Guide
No Sound From Speaker:
Please go through this checklist before calling
LightSPEED Service Department.
•
Confirm the LightMic and the
LES 780iR are turned on and have
matching channels. Check both
A VOLUME and B VOLUME
to ensure they are set correctly.
Battery Check:
•
Confirm batteries are charged each
night. With proper charging,
batteries will last about one
school year.
•
Confirm amplifier power supply is
the correct type—if in doubt, call
LightSPEED. In addition, confirm
that the power supply is connected
securely in the wall outlet and into
the DC POWER connector
•
Transmitters are charged via a
jumper cable from the back of the
LES 780iR. Make sure plugs are
secured and in the proper jacks.
on the back of the 780iR.
•
•
Turn the 780iR on. Confirm that
the POWER light located on the
front panel switch is on.
•
•
Confirm the green charging light
located on the front of the LightMic
is on while charging.
Turn the LightMic on and confirm
that the corresponding red IR light,
located on the front panel of the
LES 780iR, lights. When speaking
into the LightMic, the green AF
light will flash/flutter with your
voice volume.
Ensure the LightMic is turned off
while charging.
Hearing Static or Buzzing:
•
•
If using two LightMics, check that
they are not set to the same
channel. If so, select a different
channel for one of the LightMics.
•
•
Confirm that the batteries in the
transmitter are fully charged. When
they are, the red indicator will
glow steadily.
Keep the LES 780iR at least 6 feet
away from computers.
Low Volume:
Confirm that the speaker wires are
in the correct jacks on the back of
the LES 780iR and confirm that the
speaker switch for that speaker
output is in the ON position. Also,
confirm that the volume level for
each connected speaker is set in the
middle position (12 o’clock).
•
Check volume level on the LES
780iR and adjust as necessary.
•
Check volume level on each of the
speakers (on back panel) and adjust
as necessary.
Sound Fades In and Out
(Drop Out):
•
Test LightMic with fully charged
batteries. LED light on front of mic
will glow bright red.
[17]
Download from Www.Somanuals.com. All Manuals Search And Download.
Individual Components and Optional Accessories
LES-780C:
LES-LT70:
Infrared Receiver/Amplifier/Mixer with built-in
charger
“LightMic” Rechargeable Microphone/Transmitter
with lavaliere cord, batteries and charging cable
LES-HM70:
Handheld Microphone/Transmitter with batteries
and charging cable
BA-NH1:
Rechargeable AA Battery (Nickel Metal Hydride)
AC-TCC7:
Charging Cable for LT-70 and HM-70 to be used
with 705iR
AC-LTCB:
Lavaliere cord for LT-70
PS-24V-2.5:
IR-SR70:
Power Supply/Battery Charger for 780iR
Infrared Sensor with wall or ceiling mounting bracket
MC-TK250LTM:
Optional Noise-canceling Headset Microphone to
be used with LT-70
AC-AUDIOCABLE-4 RCA Cable Kit for input of audio into the LES 780iR
CA-MMC3535:
CA-MMC2535:
SPEAKERS:
Audio Patch Cable (3.5 mm mono to 3.5 mm mono)
Audio Patch Cable (2.5 mm mono to 3.5 mm mono)
Contact LightSPEED at 800.732.8999 for
loudspeaker information
[18]
Download from Www.Somanuals.com. All Manuals Search And Download.
User Notes
Record your system serial numbers and purchase information. is is helpful when
ordering additional components, accessories, and/or warranty service.
standard
serial number
components
LES 780iR
LT-70 LightMic
SR-70 IR Sensor
Speakers
Power Supply
n/a
RCA Cables
optional
serial number
component
HM-70 Handheld
Microphone
TK-250 Headset
Microphone
Wall-Mounting Shelf
[19]
Download from Www.Somanuals.com. All Manuals Search And Download.
L I G H T S P E E D T E C H N O L O G I E S , I N C .
1 1 5 0 9 S W H E R M A N R D
T U A L A T I N , O R 9 7 0 6 2
8 0 0 . 7 3 2 . 8 9 9 9
W W W . L I G H T S P E E D - T E K . C O M
Download from Www.Somanuals.com. All Manuals Search And Download.
|