Operating instructions
GB
for upright refrigerators with BioFresh compartment
7082 212 - 02
KB/SKB/es
3006
Download from Www.Somanuals.com. All Manuals Search And Download.
Congratulations on your purchase. In choosing this appliance you have opted for all the benefits of state-of-
the-art refrigeration technology, guaranteeing you top quality, a long life span and excellent reliability.
The features on your appliance have been designed to ensure maximum convenience - day in, day out.
This appliance has been manufactured with recyclable materials using an environmentally friendly process,
so together you and we are making an active contribution to the preservation of our environment.
To get to know all the benefits of your new appliance, please read the information contained in these operat-
ing instructions carefully.
GB
We wish you much pleasure with your new appliance.
Keep these operating instructions in a safe place and pass
them on to the next owner, where applicable.
The operating instructions apply to several models. Diffe-
rences may therefore occur.
Contents
Page
Safety regulations
§
W The appliance is intended for chilling food.
It is designed as a household appliance. If used
Operating instructions
The appliance at a glance .................................. 12
Contents............................................................. 13
Safety regulations............................................... 13
Notes on energy saving...................................... 13
Safety instructions and warnings ............................. 14
Disposal notes.................................................... 14
Setting up ........................................................... 14
Connecting to the mains..................................... 14
Operation and control elements............................... 15
Switching the appliance on and off..................... 15
Setting the temperature...................................... 15
Temperature display ........................................... 15
Audible warning signal........................................ 15
SuperCooling ..................................................... 15
Additional functions ........................................... 15
Child-proof lock ................................................ 15
Display brightness* .......................................... 15
Temperature in the BioFresh compartment ...... 15
Refrigerator compartment........................................ 16
BioFresh compartment ............................................ 17
Storage times ..................................................... 17
Defrosting, cleaning................................................. 18
Interior light.............................................................. 19
Troubleshooting ....................................................... 19
Customer service and type plate........................ 19
Instructions for installation and modification
commercially, the relevant regulations on commercial use
must be observed.
W The appliance is set to operate within specific ambient
temperature limits according to its climate rating. These
temperature limits should not be exceeded. The correct
climate rating for your appliance is indicated on the type
plate. This is explained as follows:
Climate rating
Set for ambient
temperatures of
SN
N
+10°C to +32°C
+16°C to +32°C
+18°C to +38°C
+18°C to +43°C
ST
T
-
-
The refrigerant circuit has been tested for leaks.
The appliance complies with current safety regulations
and EC directives 73/23/EEC and 89/336/EEC.
!
Notes on energy saving
W Ensure that there is adequate space around the appli-
ance for ventilation and air extraction.
W Avoid keeping the door open for too long.
W Store food logically. Do not exceed the storage period
specified.
Dimensions ................................................... 20-21
Changing over door hinges ........................... 20-21
Notes on assembling decor panels .................... 21
W Always allow hot food to cool to room temperature
before placing in the appliance.
W Keep the appliance door shut in the event of a breakdown.
This will delay the cold loss and will help to maintain the
quality of the chilled food for longer.
13
* Depending on model and options
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety instructions and warnings
Disposal notes
In the case of prolonged skin contact, protective measures
should be taken, e.g. gloves should be worn.
The packaging is made of recyclable materials.
W Do not consume food which has been stored for too long, as it
could cause food poisoning.
- Corrugated board/board - EPS moulded parts
- Polythene sheets
- Polypropylene straps
Setting up
• Keep packaging materials away from children - polythene
sheets and bags can cause suffocation!
W When setting up/fitting ensure that the refrigerant circuit pipes
are not damaged.
• Please return the packaging to an official collection point.
W Once in position, use the 10 spanner provided to
adjust the feet so that the appliance is level and does
not wobble.
Your old appliance:This contains some reusable mate-
rials and should be disposed of properly - not simply with
unsorted household refuse.
W Avoid positioning in direct sunlight or next to an oven,
radiator or similar, in damp locations or near spraying water.
W Standard EN 378 specifies that the room in which you install
your appliance must have a volume of 1 m3 per 8 g of R 600a
refrigerant used in the appliance, so as to avoid the formation
of inflammable gas/air mixtures in the room where the appli-
ance is located in the event of a leak in the refrigerant circuit.
The quantity of refrigerant used in your appliance is indicated
• Discarded appliances should be disabled: Remove the
plug, cut through the connection cable and render the
catchunusablesothatchildrencannotbecometrapped
inside.
• Ensure that the refrigerant circuit is not damaged when the ap-
pliance that is no longer needed is taken away for disposal.
• Details of the refrigerant can be found on the type plate.
• Appliances which are no longer needed must be disposed of
in a professional and appropriate way, in accordance with the
current local regulations and laws.
on the type plate on the inside of the appliance.
W The ventilation grilles should not be obstructed. Always
ensure that there is good ventilation and that the
outward flowing air is able to escape.
W Condensation may form on the outside of the refrigerator/
freezer during periods of high humidity. Constant ventila-
tion of the installation site is recommend.
Technical safety
W To prevent injury or damage to the unit, the appliance
should only be transported wrapped and set up by two
people.
Please note the appendix concerning installation instruc-
tions.
W
The refrigerant R 600a is environmentally friendly but flammable.
W Do not damage the refrigerant circuit pipes. Splashes of refrig-
erant can harm your eyes or ignite.
W Do not place heat-emitting appliances, e.g. microwave oven,
toaster, etc., on top of the refrigerator or freezer.
W Remove all transportation safety components.
W If refrigerant escapes, remove all naked flames or sources of
ignition in the vicinity of the leak, disconnect the appliance
from the mains and ventilate the area well.
Connecting to the mains
Power supply (AC) and voltage
W In the event that the appliance is damaged, contact the sup-
plier immediately before connecting to the mains.
W To guarantee safe operation, ensure that the appliance is set
up and connected as described in these operating instruc-
tions.
at the operating point must comply with the details on the
type plate, which is located inside the appliance on the left,
fig. A.
W Connect the appliance with a properly earthed
fused plug and socket only.
W Disconnect the appliance from the mains if any fault occurs.
Pull out the plug (not by pulling on the mains cable) or switch
off or remove the fuse.
W The socket must be fused with a 10 A fuse or higher, it must
be away from the rear of the appliance and must be easily ac-
cessible.
W Any repairs and work on the appliance should only be
carried out by the customer service department, as
unauthorised work could prove highly dangerous for the
W Do not
-
-
connect to stand-alone inverters*,
user. The same applies to changing the mains power cable.
operate with so-called energy-saving plugs - this can damage
the electronic system,
Safety during use
-
connect to the supply with other equipment using an extension
cable - risk of overheating.
W Do not store explosives or sprays using combustible
propellants such as butane, propane, pentane, etc.
in the appliance. Electrical components might cause
leaking gas to ignite. You can identify such sprays by the
printed contents or a flame symbol.
W When removing the mains cable from the back of the appli-
ance, remove the cable holder so as to avoid vibration noise.
The wires in the mains lead are coloured in accordance with the
W Only store high-percentage alcohol in tightly sealed, upright
containers.
following code: green/yellow = earth, blue = neutral, brown = live.
Warning! This appliance must be earthed.
W Do not allow naked flames or ignition sources to enter the ap-
pliance.
Non-rewireable plugs BS 1363
If this machine or appliance is fitted with a non-rewireable plug, the
following information applies: If the socket outlets are not suitable for
the plug supplied with this product, it must be cut off and an appropri-
ate plug fitted. The plug cut from the flexible cord should be disposed
of and on no account be inserted into a 13 A socket elsewhere in the
house (electric shock hazard).
W Do not use electrical appliances inside the appliance (e.g.
steam cleaners, heaters, ice makers, etc.).
W Do not stand on the plinth, drawers or doors or use them to
support anything else.
W This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities
or lack of experience and knowledge unless they have been
given initial supervision or instruction concerning use of the
appliance by a person responsible for their safety. Children
should be supervised to ensure that they do not play with the
appliance.
The fuse cover must be re-fitted when changing the fuse, and if the
fuse cover is lost the plug must not be used until a suitable replace-
ment is obtained. The colour of the correct replacement cover is
that of the coloured insert in the base of the plug, or the colour that
is embossed in words on the base of the plug (as applicable to the
design of the plug fitted). The correct rating of the replacement fuses
that are ASTA approved to BS 1362 should be fitted. Replacement
fuse covers may be purchased from your local electrical suppliers,
electricity showroom or approved service agent.
W Avoid prolonged skin contact with cold surfaces or chilled/
frozen food.This could cause pain, numbness and frostbite.
14
* Depending on model and options
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation and control elements
Audible warning signal
The audible warning signal helps you to protect the food in
your refrigerator and save energy.
-
It will sound when the door has been open for longer
GB
than about 1 minute.
W The signal will stop when you press the audible warning
on/off button 5,
-
-
and when you close the door.
The audible warning on/off button only works when the
door is open. Once the door is shut, the alarm function
automatically switches to standby.
You are advised to clean the appliance before switching it on
for the first time (see "Cleaning").
SuperCooling
The SuperCooling function switches the appliance to the
coldest chilling setting.
Switching the appliance on and off
W Switching on: Press the on/off button 3 so that the
temperature display lights up or flashes.
It is ideal if you want to chill large quantities of food, drinks or
freshly prepared cakes or meals very quickly or if you want
greater humidity, e.g. for salad leaves.
-
The lighting will light up when the door is open.
W Switching off: Press the on/off button for approx. two
W To switch on: Press the SuperCooling button 4briefly
so that it lights up. The refrigerator temperature will drop
to its lowest value.
seconds so that the temperature display goes out.
Setting the temperature
The appliance is pre-set for normal operation. We recom-
mend temperatures of +5°C in the refrigerator.
In the refrigerator:
NB: The SuperCooling function uses slightly more energy.
After approx. 6 hours, however, the appliance switches
back automatically to normal energy-saving operation.
W To reduce the temperature:
Press the DOWN button 2.
Additional functions
In set-up mode you can set the child-proof lock, adjust the
brightness of the display* and set the temperature in the
BioFresh compartment slightly lower or higher.
Activating set-up mode:
W To increase the temperature:
Press the UP button 2.
-
-
While you are entering the temperature, the set tempera-
ture will flash on the display.
W Press SuperCooling button for approx. 5 secs - the Super-
Cooling button flashes - the display shows c for child-
proof lock.
When you press the temperature setting buttons for the
first time, the most recent setting (known as the "refer-
ence setting") is displayed.
Note: the value to be altered flashes.
W Select the required function by pressing the Up/Down but-
ton:
-
-
-
You can change the settings in increments of 1°C by
briefly pressing the buttons again. If the buttons are held
down the temperature setting will change faster.
The system switches over automatically about 5 seconds
after the button was last pressed and displays the aver-
age cooling temperature (known as the "actual setting").
You can change the temperatures in the refrigerator be-
tween 9°C and 4°C.
c = child-proof lock,
h = brightness or
b = BioFresh temperature.
W Now select/acknowledge function by pressing Super-
Cooling button briefly:
• For c = child-proof lock, press the Up/Down
button to select c1 = child-proof lock on or
c0 = child-proof lock off and acknowledge with
the SuperCooling button. When the symbol 6is
lit, the child-proof lock is activated.
W The temperature in the BioFresh compartment is con-
trolled automatically, between 0°C and 3°C.
If you require a higher or lower temperature, e.g. for
storing fish, you can alter the temperature setting in the
BioFresh compartment. See "Additional functions" for
more information.
• For h = brightness, press Up/Down button to
select h1= minimum to h5 = maximum bright-
ness and acknowledge with the SuperCooling
button.
• For b = BioFresh temperature, press the
Up/Down button to select from b1 = lowest
to b9 = highest setting and confirm with the Super-
Cooling button.The altered BioFresh temperature
adjusts slowly to the new value.
Temperature display
The average temperature in the refrigerator compart-
ment is displayed in normal mode.
If "F0"to "F 5" appears in the display, the appliance has a
fault. Consult the customer service department indicating
the fault number displayed, so that they can arrange for your
appliance to be serviced accurately and quickly.
NB: b5 = factory setting. By decreasing the tempera-
ture, "b4" to "b1", minus temperatures can be reached
and the food in the BioFresh compartment will freeze
slightly.
Exit set-up mode:
W To exit the set-up mode, press the On/Off button; after
2 mins. the electronic system switches over automatically.
-
The normal operating mode is activated again.
15
* Depending on model and options
Download from Www.Somanuals.com. All Manuals Search And Download.
Refrigerator compartment
SuperCool
4
Arranging food in the refrigerator
Because of the natural circulation of air in the refrigerator
compartment, the temperature in different parts of the refrig-
erator will differ, each area being suitable for different types
of food. The refrigerator is coldest just above the vegetable
bins and against the rear wall; it is warmest at the front at the
top and in the door (suitable for spreadable butter, cheese
etc.). See fig. B for food storage suggestions.
1
3
5
6
2
Notes on cooling
-
Store food so that air can circulate properly around it. Do
not pack the refrigerator too full. Do not cover the fan
slits* at the back, otherwise the refrigerating capacity will
be impaired!
7
9
-
-
Food which gives off or absorbs odours and flavours,
and liquids should always be stored covered or in closed
containers.
Always store food which gives off or is sensitive to ethyl-
ene gases such as fruit, vegetables and salads separately
or wrapped in order not to affect their storage life; e.g. do
not store tomatoes together with kiwis or cabbage.
Fig. B:
Refrigerator:
1 butter, cheese
2 eggs
3 drinks, cans, bottles
4 preserves
5 baked goods
6 dairy products
7 tropical fruits, cold-sensitive vegetables
BioFresh compartment:
8 meat and sausage products, fish, pre-cooked meals
9 salad, fruit, vegetables; see "BioFresh compartment" for
more information
Changing shelf arrangement
You can re-arrange the height of the shelves and door racks
as required.
W Re-positioning the door racks, fig. C: Slide the door
rack up, pull out towards you and replace in reverse order.
W By adjusting the bottle holder you can protect the bottles
from falling over when the door is opened and closed.
Always hold by the plastic handle.
W Re-positioning the shelves, fig. D:
-
Lift the shelf, slide forwards and remove.
Always insert shelves with the raised edge at the back
pointing upwards, otherwise food may freeze onto the rear
wall.
-
The glass shelves are fitted with stops to prevent them
being pulled out accidentally.
W If you require space for large bottles and containers,
-
lift the front half of the split glass shelf* and carefully
slide it under the back half until the stops click into the re-
cesses, fig. E1.
W The bottle rack* (fig. E2) provides additional chilling
space for bottles up to 300 mm in height.
W In order to utilise additional storage space in the refriger-
ator compartment, the vegetable bin 7, fig. B, can be
removed.
16
* Depending on model and options
Download from Www.Somanuals.com. All Manuals Search And Download.
BioFresh compartment
The BioFresh compartment enables you to keep a range of
fresh food fresh for up to three times as long as you would
in a standard refrigerator, thus making your stocks last
longer. Taste, freshness and nutritional value (vitamin B and
C group content) remain largely intact. Spoilage and weight
loss in vegetables and fruit are reduced, leaving food more
fresh and natural.
Storage times
for food in the BioFresh compartment:
Dry setting
GB
butter
up to 30 days
cheese, soft
milk, fresh
up to 30 days
up to
7 days
The automatically controlled storage temperature, which is
kept between 0°C and 3°C, and the resultant humidity pro-
vide the ideal storage conditions for different types of food.
sausage, cold cuts
fish
up to
up to
up to
up to
7 days
4 days
3 days
5 days
shellfish
poultry
The top drawer 8,
fig. B, is suitable for storing dry or wrapped food (e.g. dairy
products, meat, fish, cold meats). The storage climate in this
drawer is relatively dry.
pork
large portions
cut up
up to
up to
up to
up to
7 days
5 days
7 days
7 days
beef
game
Drawers with humidity control 9,
Fig. B: When set to "humid" these drawers can be used for
storing unwrapped salad, vegetables and fruit. When the
drawer is full, the climate will be "dew-fresh", with approxi-
mately 90% humidity.
Humid setting
Vegetables, salad
artichokes
asparagus
broccoli
up to 21 days
up to 14 days
up to 14 days
up to 30 days
up to 180 days
up to 150 days
up to 21 days
up to 30 days
up to 30 days
up to 14 days
up to 14 days
up to 21 days
up to 180 days
You can set the humidity in this drawer to dry or moist as
required.
Brussels sprouts
cabbage
Humidity selection:
W "dry" setting: small humidity symbol
- slide control to left. Insert food that is
carrots
cauliflower
celery
suitable for being stored in a dry climate.
W "humid" setting: high relative humidity of
max. 90%, large humidity symbol - slide
control to right.This setting is suitable for
chicory
Chinese cabbage
curly kale
storing unwrapped food with a high moisture content such
as fresh lettuce.
fennel
garlic
Notes:
green onions
herbs
up to
7 days
W The humidity in the compartment depends on the mois-
ture content of the food in it, and the frequency with which
the compartment is opened.
up to 30 days
iceberg salad, endives,
lamb's lettuce
kohlrabi
up to 21 days
up to 14 days
up to 60 days
up to 10 days
W When buying food, check that it is fresh - the fresher the
product and the higher its quality, the longer it will keep.
W Unwrapped animal and vegetable foods should be stored
separately in the drawers. If there is not enough space
for them to be stored separately, make sure that they are
wrapped. Do not allow different types of meat to come
into contact with one another but keep them packaged
separately so as to avoid premature bacterial spoilage.
W Please note that protein-rich food spoils more quickly, i.e.
crustaceans and shellfish spoil faster than fish, and fish
faster than meat.
leeks
lettuce
mushrooms
peas
up to
7 days
up to 10 days
up to 21 days
up to 14 days
up to 60 days
radicchio
radishes
savoy cabbage
spinach
up to
7 days
Fruit
W Remove food from the drawers some time before con-
sumption. Enjoyment will be enhanced in this way as the
aroma and flavour develop best at room temperature.
apples
up to 180 days
up to 14 days
up to 14 days
apricots
bilberries
blackberries
cherries
up to
8 days
W The following products should not be stored in the
BioFresh compartment: cold-sensitive vegetables such
as cucumber, peppers, aubergines, avocados, semi-ripe
tomatoes, beans, zucchini, and all cold-sensitive tropical
fruits.
up to 14 days
up to 21 days
up to 60 days
black and red currants
dates (fresh)
figs (fresh)
gooseberries
grapes
up to
7 days
up to 21 days
up to 90 days
up to 120 days
up to 30 days
up to 120 days
up to 21 days
up to 90 days
kiwi fruits
peaches
pears
plums
quinces
raspberries
rhubarb
up to
up to 21 days
up to 5 days
5 days
strawberries
17
* Depending on model and options
Download from Www.Somanuals.com. All Manuals Search And Download.
Defrosting, cleaning
W To clean the BioFresh drawers, pull the drawers right
Defrosting
out, grip at back and lift out (fig. L).
The refrigerator compartment
-
To re-insert: place the drawers on the extended rails - the
rails must align with the front of the drawer - and slide in
(fig. M).
defrosts automatically. The defrost water is evaporated by
the heat from the compressor; drops of water on the rear wall
are perfectly normal.
W Ensure that the defrost water can flow freely through the
drain hole in the rear wall (arrow in fig. A).
Cleaning
W Before cleaning, always switch off the appli-
ance. Disconnect from the mains or unscrew
or switch off the fuse.
W Clean the outer walls, inside and equipment by
hand with lukewarm water and a little detergent. Be-
cause of the risk of injury and damage to the appliance,
steam cleaning equipment should not be used.
W We recommend using a soft cloth and an all-purpose
cleaner with a neutral pH value. Only use food compat-
ible cleaning and care agents on the inside of the appli-
ance.
fig. L
fig. M
-
Simply pull the drawer cover out towards you. When
re-inserting, make sure the bearing pins snap into place in
the grooves.
The drawer and the cover must be flush with one an-other
vertically.
W The dust should be removed from
the refrigeration unit and heat ex-
changer - metal grid at the back of
the appliance - once a year. Dust
deposits increase energy consump-
tion.
W Use a commercially available stainless-steel cleaning
agent for stainless-steel appliances*.
-
In order to achieve best possible protection, apply a stain-
less-steel care agent uniformly in grinding direction after
cleaning. Points which are darker at the start and a more
intensive coloration of the stainless-steel surface are
normal.
W Ensure that none of the wires or other
components are dislodged, bent or damaged.
W Do not use abrasive sponges or scourers, do not use con-
centrated cleaning agents and never use cleaning agents
containing sand, chloride or acid or chemical solvents, as
W Then connect/switch on the appliance.
these would damage the surfaces and could cause corro- If the appliance is to be left switched off for any length of
sion.
time, empty the appliance, disconnect from the mains, clean
W Ensure that no cleaning water penetrates into the ventila-
as described above and leave the door open so as to avoid
tion grilles or any electrical components, and keep it out of odours.
the defrost drain as far as possible.
Wipe the appliance dry.
-
Do not damage or remove the type plate on the inside of
the appliance. It is very important for servicing pur-
poses.
W The butter dish* can be washed in a dishwasher. The
racks, shelves and other components should be cleaned
by hand as they are not dishwasher-safe.
-
Always remove the top door rack (butter and cheese
compartment) together with the flap*. Then press one of
the side walls carefully to the outside to release the flap
pin. The flap can then be lifted out. Make sure not to
damage any bushings*.
-
The shelves and door racks can be dismantled for clean-
ing. Remove the trims and sides* from the glass shelves.
W Remove the protective film* from the decorative trims.
W Clean the drain hole on the rear
wall frequently, fig., arrow. If neces-
sary, clean with a thin object, e.g.
a cotton swab or similar.
18
* Depending on model and options
Download from Www.Somanuals.com. All Manuals Search And Download.
Interior light*
Troubleshooting
This switches off automatically after the door has been
opened for approx. 15 minutes. If it does not switch on when
the door is opened briefly, but the temperature setting dis-
play is working, the interior light may be defective.
Your appliance is designed and manufactured for a long life
span and reliable operation.
If a malfunction nonetheless occurs during operation, check
whether it is due to an operating error. Please note that even
during the warranty period the resultant servicing costs in
this case will have to be borne by the owner.
GB
Replacing the bulb*:
You may be able to rectify the following faults by checking
the possible causes yourself:
W Bulb data: max. 25 W; current and voltage must agree
with the details on the type plate. Only use bulbs of the
same size. Bulb fitting: E 14.
Malfunction
Possible cause and remedy
_______________________________________________
Appliance does not work, display is off
W Switch off the appliance. Disconnect from the mains or
remove or unscrew the fuse.
-
-
-
Is the appliance switched on properly?
Is the mains plug properly inserted in the socket?
Is the socket fuse intact?
W Press the light cover together at the sides as in fig. F1 (1).
Lift it out and unclip at back (2).
W Replace the bulb as in fig. F2. To counteract the friction
seal, turn with slightly more pressure. When inserting, en-
sure that the seal is properly in place in the lamp socket.
W Clip the back end of the cover in and clip the sides into
place.
The interior light does not come on
-
-
-
Is the appliance switched on?
Has the door been open for more than 15 minutes?
The bulb/lighting unit* is defective. Change the bulb/light-
ing unit* as described in "Interior light".
Loud running noise
-
Is the appliance standing firmly on the floor, or does the
compressor cause nearby items of furniture or objects to
vibrate? If necessary, move the appliance slightly, align by
adjusting the adjustable feet, or move bottles and contain-
ers apart.
- Burbling noises are normal. These are caused by the
refrigerant flowing round the refrigerant circuit.
A short clicking sound:This will be heard whenever the
refrigeration unit (the motor) switches on or off automati-
cally.
Changing the lighting unit*:
Caution - class 1M laser radiation. When cover is
removed, do not look directly at light through optical
instruments.
Motor noise:This will be slightly louder for a brief period
when the refrigeration unit switches on.
The audible warning signal sounds
-
Is the appliance closed properly? Check the appliance as
described in "Audible warning signal".
The lighting unit 2, dissipator with light emitting diode
(LED), is available from your dealer.
The temperature is not cold enough
-
Is the temperature setting correct? If necessary, set a
lower temperature and check the display after 24 hours.
Does the door close properly?
W Switch off the appliance. Disconnect from the mains or
remove or unscrew the fuse.
-
-
W Fig. F3: Press the bulb cover 1against the compartment
roof 1 and release by pulling forwards 2.
W Fig. F4: Unscrew the lighting unit 2and loosen the cable
connector 3.
Is the appliance sufficiently well ventilated?
Clear ventilation grilles if necessary.
Is the ambient temperature too hot? (See "Safety regula-
tions")
-
-
-
W Re-assemble with new lighting unit 2, working in reverse
order.
Has the appliance been opened too often or left open too
long?
If applicable, wait until the appliance reaches the required
temperature itself.
Customer service and type plate
If none of the above causes apply and you cannot
rectify the fault yourself, or if the temperature display
reads "F 0" to "F 5", this means that there is a fault. Please
contact your nearest customer ser-vice department (see
enclosed list for addresses), indicating the fault number
and the
type designation 1,
service number 2and
appliance number 3
on the type plate. This will help us
to provide you with a faster and
more accurate service. The type
plate is located on the inside left of
the appliance next to the bottom
BioFresh drawer.
Leave the appliance shut until the customer service engineer
arrives so as to prevent any further cold loss.
19
* Depending on model and options
Download from Www.Somanuals.com. All Manuals Search And Download.
Instructions for installation and modification
-
Fit covers 8again: insert hinge-side cover by sliding
Dimensions
outwards and click into position; insert handle-side cover
by sliding inwards and click into position.
The external dimensions of the appliance can be seen on
the illustration on the opposite page (fig. S) and in the table
below.
-
Bottom: Using a screwdriver, remove the spacer boand
replace on the other side, fig. Ta.
Gross capacity
of appliance [l]
(see type plate)
External dimensions [mm]
W Moving the BioFresh draw-
H
_______________________________________________
ers, figs. T1, 2, 3:
-
-
Fig. T1: Pull each drawer right
out, grip at back and lift out.
Fig. T2: Pull the drawer
346
(36..)
1644
385
(42..)
1841
cover cl out towards you and
replace in the grooves so that
it is offset towards the new
handle side. Slide in until the
support pins snap into place.
Fig. T3: Replace the draw-
ers by placing on the fully
extended guide rails - the rails
must align with the front of the
drawer - and slide in.
Installation instructions
-
Do not install the appliance directly next to another refrig-
erator or freezer.This is important to prevent condensa-
tion and consequential damage resulting from it.
This does not apply to Side-by-Side models (SBS). They
are designed for Side-by-Side installation with another
refrigerator/freezer.
-
-
The "Installation instructions for Side-by-Side combina-
tions" are supplied in the accessories bag for the SBS
freezer or the appliance with a freezer compartment.
The drawer and the cover
must be flush with one another
vertically.
Changing the door mounting
On appliances which are intended for individual installation
the door hinges can be changed from one side to the other.
On SBS appliances in stainless steel finish, which are de-
signed for Side-by-Side installation, the door hinges must
not be transferred to the other side!
W Re-attach the door:
-
Remove plugs bpfrom the door mounting points and
replace on the other side.
-
Only stainless-steel appliances: Unscrew the closure dl
underneath the door on the hinge side. Fit the closure
provided separately dmon the new hinge side and
screw into place with the
W Only change over door hinges when mains plug is discon-
nected!
W Fig. T. With the door open, lever out plinth panel 1on the
hinge side with a screwdriver and remove from front.
same screw dn. Discard the old closure dl(or keep
it for later use).
-
Lever out cover 2with a screwdriver.
Close door.
-
-
Suspend door with spacer in hinge pin 7, close door.
Rotate hinge component 4by 180°, remove hinge
pin 5, turn by 180° and replace. Mount both parts in the
hinge bq: slide the pin into the door mounting through the
hinge, tilt in the hinge component, slide up and attach with
screw 3.
-
Unscrew screw M5 3.
W Pull hinge component 4with hinge pin 5out from un-
derneath and remove.
W Open door, lift out at bottom and remove; do not lose the
spacer bl.
W Align the door flush with the body of the appliance using
the slot on the hinge bq, then tighten screw 3.
W Attach the plinth panel 1and click into place by press-
ing.
W Transfer all hinge components onto the other side:
W Top: depending on version, proceed as follows:
Version I (visible operating panel): Lever out covers 8
with a screwdriver at the front and remove at an angle
from below. Remove hinge pin 7 and insert on the op-
posite side. Use the hexagon socket on the open-ended
spanner provided (spanner width 5). Fit covers 8 again:
insert at rear and click into place at front.
W With the door open, insert the cover 2in the plinth panel
at the front and click into place at the back.
W Transfer* door handle brand plugs bt. With the door
open, carefully lift out the pressure plates* bs at the front
and slide away; unscrew handle.
Version II (concealed operating panel): Lift up cover 8on
handle side, push outwards; lift up cover on hinge side
and pull off.
Reassemble in reverse order: replace the pressure plates
and click into position.
-
Unscrew earthing plate cm: first earthing screw cl, then
inner retaining screw cq.
W If your refrigerator has a bottle rack*, fig. T,
put the vegetable bins on the other side (the bottle rack
should always be on the same side as the door handle)
to facilitate removal of the bottles.
-
Unscrew hinge 9: first undo earthing screw cl, then re-
taining screws cq. Fit hinge 9 to opposite side: for easy
assembly, fit hinge from above and first tighten with the
upper retaining screw cqM5, then screw cqand finally
earthing screw cl M4.
-
-
Turn earthing plate cmthrough 180° and screw tight again
on the new handle side: first retaining screw cq, then
earthing screw cl.
Insert hinge pin 7in the other retaining hole. Use the
hexagon socket on the open-ended spanner provided
(spanner width 5).
20
* Depending on model and options
Download from Www.Somanuals.com. All Manuals Search And Download.
[mm]
[mm]
min.
300 cm2
Insertion into row of kitchen units
Fig. U:The appliances can be installed in a row of kitchen
units. To adapt the height of the appliance to the sur-round-
ing furniture a top unit 1can be added.
1
2
GB
A gap of at least 50 mm depth must be provided behind and
along the entire width of this unit so as to ensure sufficient
ventilation. The area of ventilation underneath the ceiling
should be at least 300 cm2. The greater the area the more
economically the appliance will run.
W When installing with standard kitchen units (max. depth
580 mm) and decor panels of max. 2 mm thickness, the
appliance can be set up right next to the kitchen unit. The
door protrudes 34 mm from the side of the kitchen unit
and 51 mm at the front. This enables it to be opened and
closed without difficulty.
3
4
W When setting up the appliance next to a wall 4, a mini-
mum distance of 36 mm must be provided on the hinge
side between the appliance and the wall (for the handle
when the door is open).
S
U
1 top unit
3 kitchen unit side panel
2 refrigerator/freezer
4 wall
I
8
7
Notes on assembling decor panels*
(with white appliances of height H = 1841 mm)
Decor panel and frames can be attached to the door of
your appliance to match or contrast it to the existing kitchen
colour scheme.
8
SW5
14
16*
18 *
10
17*
Torx 15
The panels are available from your kitchen furniture supplier.
The frames can be fitted later and are available from your
dealer.
If you wish to fit the decor panels yourself, you will need a
drill or a rechargeable screwdriver to pre-drill the retaining
holes.The door handles are to be replaced by the rigid han-
dles included in the decor frame retrofit kit.
*
31*
B
13
2
5
For further instructions and dimensions see the installation
instructions included in the retrofit kit.
30
A
4
3
15
C
32
1
13
15
Ta
Torx 25
9
25
20
II
8
8
7
SW5
21
9
______________________________________________
20 25
9
25 20
All types and models are subject to continuous improve
ment and the manufacturer therefore reserves the right to
make modifications in the shape, equipment and technology.
21
T
21
* Depending on model and options
Download from Www.Somanuals.com. All Manuals Search And Download.
|