Machine type: 10097/2566 [B340]
10099/2568 [B540]
10101/3363 [B540p]
10098/2567 [B345]
10100/4749 [B545]
Lenovo
IdeaCentre B3/B5 Series
User Guide
Version 1.0
2012.02
31501557
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Information
Before using this manual, it is important that you read and understand all of the
related safety information for this product. Refer to the Safety and Warranty Guide
that you received with this product for the latest safety information. Reading and
understanding this safety information reduces the risk of personal injury or damage
to your product.
The interface and functions shown in this User Guide are provided for reference
only and may differ from actual product appearance. Product design and
specifications may be changed without notice.
Danger: Be aware of extremely hazardous or potentially lethal situations.
Attention: Be aware of possible damage to programs, devices, or data.
Note: Pay attention to this important information.
© Copyright Lenovo 2012. All rights reserved.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered
pursuant a General Services Administration “GSA” contract, use, reproduction, or
disclosure is subject to restrictions set forth in Contract No. GS-35F-05925.
© 2012. Lenovo
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter
Using the Computer Hardware
1
This chapter contains the following
topics:
2
3
4
5
6
Ø
Ø
Introduction to the computer hardware
Information on computer connections
Note: The descriptions in this chapter
might be different from what you see on
your computer, depending on the computer
models and configurations.
User Guide
1
Download from Www.Somanuals.com. All Manuals Search And Download.
1.1 Front view of the computer
Attention: Be careful not to block any air vents on the computer. Blocked
air vents can cause overheating.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Built-in microphone area
Camera
Built-in IR Emitter(do not block)
(selected models only)
Hard Disk Drive Indicator
Bluetooth status indicator
TV indicator
WIFI status indicator
Volume down
Volume up
Brightness down
Novo Vision button
Monitor On/Off
Brightness up
PC mode / HDMI-in / AV-in switch
Attention: The effective range of the Built-in IR Emitter is 10 feet (3m).
2
User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1.2 Left and right view of the computer
1
3
4
5
6
7
2
8
Optical drive
TV buttons (selected models only)
USB connector
Headphone port
Microphone port
USB connector
Memory card reader
Power button
User Guide
3
Download from Www.Somanuals.com. All Manuals Search And Download.
1.3 Rear view of the computer
8
7
8
1
2
6
3
4
5
Ethernet port
USB connectors
HDMI-out connector
HDMI-in connector (selected models only)
AV-IN connectors (selected models only)
TV tuner ports (selected models only)
Power connector
Air vents (do not block)
4
User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1.4 TV button instructions (selected models only)
1
2
3
4
5
6
7
Channel up
Channel down
Volume up
Volume down
TV mode menu button
Signal source selection button
TV power On/Off
User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
5
1.5 Computer stand
Use the stand to position the display to your preference. It can be rotated between
15º and 40º from the vertical.
Attention:
1. The computer stand must remain installed at all times to ensure
maximum system stability.
2. Make sure the angle of the computer is at least 15 degrees from the
vertical; otherwise the computer will be unstable and could fall over.
6
User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1.6 Connecting your computer
Note: Your computer may not have all of the connectors described in this
section.
1.6.1 Basic connector instructions
Connector
Description
Microphone
Use this connector to attach a microphone to your
computer when you want to record sound or if you use
speech-recognition software.
Headphone
Use this connector to attach headphones to your
computer when you want to listen to music or other
sounds without disturbing anyone.
USB connector
Use this connector to attach a device that requires a
USB connection.
Ethernet connector
Use this connector to attach the computer to an
Ethernet-type local area network.
HDMI connector
(optional)
Connects to the HDMI connector on your display or TV.
TV-Tuner connector
(optional)
Connects to an external antenna to view programs
using the optional TV tuner card.
AV-in connector
(optional)
Connects to the composite audio and video
connectors on your video device.
Note: If your computer is equipped with a wireless keyboard or mouse,
follow the installation instructions for those devices.
User Guide
7
Download from Www.Somanuals.com. All Manuals Search And Download.
1.6.2 Connecting the power cord
Connect the power cord properly to grounded electrical outlets.
1.7 Important information about using the computer
Press the power button on the side of the computer to turn on the computer.
8
User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: The buttons at the bottom of the screen are touch buttons. When
you touch these, the indicator lights turn on.
Hold the computer tightly when you carry it.
User Guide
9
Download from Www.Somanuals.com. All Manuals Search And Download.
1.8 Wired keyboard (selected models only)
LVT —— After entering Windows, press this key to launch the LVT (Lenovo
Vantage Technology) program, Lenovo’s pre-loaded Home PC software.
In addition to its own functions, the LVT program will allow you to start
other Windows compatible software, specially configured to run on this
model of computer.
F2 —— Your computer has the Lenovo Rescue System installed. To learn
more about this program, repeatedly press and release the F2 key
once turning on the computer until the Lenovo Rescue System open.
10 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter
Touch screen user instruction
1
This chapter contains the following
topics:
2
3
4
5
6
Ø
Ø
Ø
Touch Screen Calibration
User Gesture Instructions for the Touch screen
Attentions when using the Touch Screen
Attention: Only some selected models are
equipped with touch screens.
User Guide 11
Download from Www.Somanuals.com. All Manuals Search And Download.
The monitor has touch capability due to a touch-sensitive screen installed. A touch
screen is an input device just like a mouse or a keyboard, and the user’s hand
transmits position information via the touch screen to the computer. With this
technology, you only need to touch the pictures or words on the computer display
lightly with your finger, and the computer will react.
2.1 Touch Screen Calibration
Prior to first use or whenever the touch screen reacts in a different place where you
are touching it, start the calibration program. The procedure is as follows:
1. In Windows 7, Select “Start” – “Control Panel”.
2. In Control Panel, select “Hardware and Sound”.
3. In “Hardware and Sound” window, select “Tablet PC Settings”.
4. In “Tablet PC Settings” dialogue, click “Calibrate” button.
2.2 User Gesture Instructions for the Touch screen
The Touch screen supports single touch and rotational movements, enlargement
and reduction multi-touch operations, and the user can transmit position
information to the computer via touch. The touch screen uses a very low pressure
movement recognition method, which only needs the finger to move lightly on the
computer display screen or make a simple hand gesture to be detected by the
main computer processor.
2.2.1 Basic Hand Gestures
1. Single Click / Double Click
For the item selected on the touch screen, touch it one or two times with finger,
to perform a single click or double click operation. This is similar to the action
performed by clicking the mouse left button.
12 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Single Finger Right Click
For the item selected on the touch screen, press and hold your finger on the
screen until a circle appears. After lifting your finger from the touch screen, a menu
bar will pop up, completing the single finger right click operation. This is similar to
the action performed by clicking the mouse right button.
User Guide 13
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Double Finger Right Click
First touch a finger to the screen to select the desired item and hold it there, then
touch another finger anywhere nearby on the screen and quickly lift it up again,
to complete a double finger right click operation. The area where the first finger is
placed can be used to show the right-click menu or perform related operations.
2
1
4. Dragging Movement
First touch your finger on the desired item on the screen and hold it there, then
make a dragging movement. This is similar to the click and drag movement you
can make with a mouse.
14 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
5. High Speed Slide
If you touch the screen with a single finger and slide it a short distance horizontally
(about 5 cm), then quickly lift it up again, this is called a High Speed Slide, and the
screen will show the “Forward” or “Back” icon.
In the default situation, a high speed horizontal sliding movement will execute a
forward or back operation. For example: Forward and Back operations for the
IE browser; or Previous and Next slide operations in Windows Photo Viewer
slideshow mode.
about 5 FP
6. Rolling Movement
When you move your finger one time vertically (or horizontally) on the touch screen,
this is called a Rolling Operation. For example: This operation is similar to moving
the scroll wheel on the top of a mouse, and produces the same results as the scroll
wheel interface does.
User Guide 15
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Zoom Operation
Touch two fingers lightly on the desired item on the touch screen, then keeping
both fingers on the screen, change the distance between them. By increasing (or
decreasing) the distance, you can perform a zoom out (or zoom in) operation. For
example: you can enlarge or reduce the picture size in Windows Photo Viewer.
8. Rotation Operation
Use two figures to touch the desired item on the touch screen, then rotate them
in the desired direction. For example: you can rotate the picture which is being
displayed in Windows Photo Viewer.
16 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
2.2.2 Related Touch Screen Settings
1. Flicks: In the notification area of the taskbar at the bottom of the screen, click on
the Flicks icon, and the current Flicks window will appear. Click once anywhere
in this window to enter Flicks Training. The user can perform operations
according to the advice given on screen.
User Guide 17
Download from Www.Somanuals.com. All Manuals Search And Download.
2. For more detailed configuration, you can click on the Flicks icon in the
notification area of the taskbar at the bottom of the screen, then click on
“Customize your flicks setting” in the Flicks pop-up window. In the “Pen and
Touch” window, the user can adjust more settings related to “Pen and Touch”
according to their specific preferences.
On the Flicksmenu you can:
• Select commonly used Flicks operation groups
• Adjust the sensitivity of the touch screen
18 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
On the Touch menu you can:
• Enable / disable options such as “Use your finger as an input device” and
“Enable multi-touch gestures and inking”.
• Select touch actions which you wish to adjust. By clicking on “Settings”, you
can adjust the “Speed” and “Spatial tolerance” parameters, to match the
user’s natural way of double-clicking. You can double-click on the lower right
corner of the icon to test this.
• Enable / disable touch Pointer.
Note: Users can access more help information from the Windows “Help
and Support” menu.
User Guide 19
Download from Www.Somanuals.com. All Manuals Search And Download.
2.3 Attentions when using the Touch Screen
1. When using it please remember not to tear the screen surface with any sharp
object.
2. In order not to affect the normal use of the touch screen, please keep its surface
clean and dry, and ensure that your fingers are clean and dry.
3. In order not to affect the precision of positioning on the touch screen, please
avoid handling or touching the glass frame of the touch screen by your hands
when you are carrying out touching operations.
4. To ensure the safety of users, please clean the screen and frame with a soft
cotton cloth after turning the screen off. In order to prevent the remaining water
mark from affecting the touch operations, do not wipe it with a damp rag.
5. Please promptly remove any dust accumulated in the four corners of the screen
and the screen frame, because this will prevent accumulated dust from affecting
the screen’s touch localization. Do not place or drop anything which could
obstruct it in the four corners of the screen or any part of its frame, because
this could separate the screen from the frame and stop the screen from being
able to sense position properly. Please avoid leaving water and dust in the gap
between the casing and glass when you are cleaning the frame.
6. Avoid using it in dusty environments, or in very hot or humid conditions. The
abrupt change of environmental temprature may in a short time cause on the
glass screen inner surface some tiny spray, which will disappear after some time
and will not affect the normal use.
Note: When it is used in normal operation, the touch screen process will
not affect the running of other computer processes.
20 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
7. The recognition of touch gestures by this product can be influenced by the
following factors:
• Touching the correct place on the screen.
• The speed of movement.
• The time interval from when the screen was last touched.
Note: To learn accurate hand gesture operations, the user can consult this
manual and also the related Windows help content.
8. The touch screen does not function in Rescue System mode.
9. The touch screen also does not function during the startup process, and in
Sleep mode or Safe mode.
User Guide 21
Download from Www.Somanuals.com. All Manuals Search And Download.
22 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Onekey TV
(selected models only)
Chapter
This chapter contains the following
topics:
1
2
3
4
5
6
Ø
Ø
Ø
Ø
Guide to the remote control
Onekey TV Instructions (ASTC model)
Onekey TV Instructions (DVB-T model)
Onekey TV Instructions (ATV model)
User Guide 23
Download from Www.Somanuals.com. All Manuals Search And Download.
To turn on the Onekey TV
Press the power button on the side of the computer or remote control to turn
on the TV.
To turn on the computer
Press the power button on the side of the computer to turn on the computer.
24 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
3.1 Guide to the remote control (selected models only)
Notes:
1. The remote control can only turn on the Onekey TV, it cannot turn on
the computer.
2. Use the remote control within 23 feet of the TV.
3. The color and shape may vary depending on the model.
User Guide 25
Download from Www.Somanuals.com. All Manuals Search And Download.
Button
Description
Display and select the available video sources.
Turn the TV on and off.
Alternate the video between the main picture and sub-
picture.
Alternate the audio between the main picture and sub-
picture.
Picture in Picture
ATSC & ATV model: Press to select additional channels
being broadcast by the same station.
DVB-T model: Enter the password to access a channel
locked by the Child Lock function.
Return to the previous channel.
Display information on the TV screen.
Select the picture mode.
Move the cursor to navigate and select options.
Confirm a setting
Press to directly access channels.
Display the main on-screen menu.
Return to the previous menu.
Adjust the volume.
Turn the TV sound off.
Change channels.
Freeze the screen.
C.C. : Control the caption decoder. (ATSC)
SUB : Display digital subtitles. (DVB-T)
Not available on ATV models.
26 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Button
Description
Teletext ON/OFF
Press the colored buttons to operate
the Teletext screen.
Note:
Press to return to the main index
page.
These buttons
are usable with
TV Tuner cards
installed and in
countries that
support Teletext
functions only.
Press to hold the Teletext page when
viewing information. Press again to
return to automatic page update.
Press repeatedly to display the upper
part of the teletext screen, then the
lower part, and then to return to full
screen.
Press to reveal hidden words e.g. quiz
page answers. Press again to hide.
Electronic Programme Guide.
Not available on ATV models.
Change the screen size mode.
Change the video source of sub-picture.
Automatically shut off the TV at a preset time.
Not available on this model.
User Guide 27
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2 Onekey TV Instructions (ASTC model) (selected
models only)
Notes:
1. The interface and functions shown in the instructions below are for
reference only.
2. The touch function cannot be used in Onekey TV mode.
3. You must be in TV mode to perform these operations.
Scan for channels
Press the MENU button on the remote control, then select Setup → Auto Scan to
scan for channels and store them in the TV automatically.
Language settings
Press the MENU button on the remote control, then select Setup → Language.
28 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture In Picture (PIP) Size
Press the MENU button on the remote control, then select PIP → PIP Size to
adjust the size of the sub-picture.
Note: When in PIP mode, press the
button on the remote control to
alternate the video between the main picture and sub-picture.
Record TV
The Onekey TV must be turned off in order to use the recording function. Once it is
turned off, use Windows Media Center or the Total Media software in PC mode to
record TV programs.
User Guide 29
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3 Onekey TV Instructions (DVB-T model) (selected
models only)
Notes:
1. The interface and functions shown in the instructions below are for
reference only.
2. The touch function cannot be used in Onekey TV mode.
3. You must be in TV mode to perform these operations.
Scan for channels
Press the MENU button on the remote control, then select Setup → Channels to
scan for channels and store them in the TV automatically.
Note: The default password is “8888”. Change the password by using the
Password option.
Note: If a channel is locked using the Child Lock function, press the
button to unlock it.
30 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Language settings
Press the MENU button on the remote control, then select Setup → Menu
Language.
Picture In Picture (PIP) Size
Press the MENU button on the remote control, then select PIP → PIP Size to
adjust the size of the sub-picture.
Note: When in PIP mode, press the
button on the remote control to
alternate the video between the main picture and sub-picture.
User Guide 31
Download from Www.Somanuals.com. All Manuals Search And Download.
Password settings
You need to enter the original password before setting a new password or
removing the password. The default password is “8888”.
Note: If you forget the password you entered, enter the Super Password
“1357” to set a new password.
Record TV
The Onekey TV must be turned off in order to use the recording function. Once it is
turned off, use Windows Media Center or the Total Media software in PC mode to
record TV programs.
32 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
3.4 Onekey TV Instructions (ATV model) (selected
models only)
Notes:
1. The interface and functions shown in the instructions below are for
reference only.
2. The touch function cannot be used in Onekey TV mode.
3. You must be in TV mode to perform these operations.
Scan for channels
1) Press the MENU button on the remote control, then select Setup → Auto
Scan to scan for channels and store them in the TV automatically.
2) Press the MENU button on the remote control, then select Setup → Manual
Scan to scan for channels and store them in the TV automatically.
User Guide 33
Download from Www.Somanuals.com. All Manuals Search And Download.
Language settings
Press the MENU button on the remote control, then select Setup → Language.
Picture In Picture (PIP) Size
Press the MENU button on the remote control, then select PIP → PIP Size to
adjust the size of the sub-picture.
Note: When in PIP mode, press the
button on the remote control to
alternate the video between the main picture and sub-picture.
Record TV
The Onekey TV must be turned off in order to use the recording function. Once it is
turned off, use Windows Media Center or the Total Media software in PC mode to
record TV programs.
34 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter
Using the Rescue System
This chapter contains the following
topics:
1
2
3
4
5
6
Ø
Ø
Ø
Ø
Ø
Ø
OneKey Recovery
Driver and Application Installation
System Setup
System Backup
System Recovery
Create Recovery Disc
Attention: Using this program will result in
loss of data.
• You can restore the C: drive of the computer
to factory default settings or to the last system
backup status using OneKey Recovery. If
you do this, all of the existing data on drive
C: will be lost, but the content and format of
the other partitions of the hard disk drive will
remain unchanged.
• If you want to install an operating system and
back it up with OneKey Recovery, you must
format the C: partition in NTFS format and
install the operating system on the C: partition.
Otherwise, the OneKey Recovery system
cannot run.
User Guide 35
Download from Www.Somanuals.com. All Manuals Search And Download.
Note about the service partition:
The files and relevant data used by the rescue system are saved in the service
partition. Deleting this partition will make the rescue system unusable. For more
detailed information, see the following instructions.
By selecting Control Panel → Administrative Tools → Computer Management →
Disk Management, you can see the service partition, which must not be deleted.
Note: The recovery files and relevant data used by the rescue system are
saved in the service partition. If the service partition is deleted or damaged
by someone other than authorized Lenovo service personnel, Lenovo will
not be liable for any losses arising therefrom in any way.
4.1 OneKey Recovery
OneKey Recovery is an easy-to-use application. You can use it to restore your
computer to the system default or to a previously backed up state.
Detailed Operation Procedure
1. Repeatedly press and release the F2 key after turning on the computer until the
Lenovo Rescue System opens, then select OneKey Recovery.
Note: System Recovery will overwrite all of the data on the C: drive. To
prevent loss of data, be sure to back up relevant data before performing
system recovery.
2. Follow the on-screen instructions to select the backup task you want to restore
from and the disk where you want to install the operating system, then press
Next to start the restore.
3. Please wait during the process of system recovery. Do not interrupt the
operation during the recovery process.
4. After the system is recovered successfully, the software will prompt you to
restart the computer. Restart the computer and start the operating system.
4.2 Driver and Application Installation
The Driver and Application Installation function in the rescue system provides a
way for the user to conveniently reinstall all of the Lenovo applications and drivers
that were shipped with your Lenovo hardware.
36 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Method 1: Automatic Installation
Repeatedly press and release the F2 key after turning on the computer until the
Lenovo Rescue System opens, then select Drivers and Application Installation.
Follow the on-screen prompts to install the Lenovo drivers and applications.
Click Install to start installing the Lenovo Drivers and Application Installation
software.
The system will restart. After the system has restarted, the installation process will
continue until it has completed.
Method 2: Manual Installation
In the Windows system, Click Start → All Programs → Lenovo → Lenovo
Drivers and Application Installation.
After starting the procedure, install all the drivers and software manually by
following the prompts.
Notes:
1. Do not install software which is already installed on the computer.
2. Make sure that the Drivers and Application Installation software has
been automatically installed before starting the operating system. The
manual installation function can only be used after the software has
been installed.
4.3 System Setup
System Setup configures the network configuration for the Lenovo Rescue
System to ensure your Rescue System can connect to internet. In addition, System
Setup sets and manages all passwords for the Lenovo Rescue system.
4.3.1 Launch
Repeatedly press and release the F2 key after turning on the computer until the
Lenovo Rescue System opens, then select System Setup.
4.3.2 Network Settings
Depending on the network access mode of the computer, select “ADSL” or “LAN
Connection” in the network connection modes.
1. If you select “ADSL” input the user name and password of the ADSL connection.
2. If you select “LAN connection” configure the IP address and proxy server of the LAN.
User Guide 37
Download from Www.Somanuals.com. All Manuals Search And Download.
4.3.3 Password Management
Password Management allows you to set and manage the password for Lenovo
Rescue System.
The default password is blank.
Set a password when you access Password Management for the first time. If you
don’t want to set a password, access the system directly and use it accordingly.
4.4 System Backup
This backs up your system partition to an image file. In case of a system failure,
you can restore your system from this image file.
In the Windows system, click Start → All Programs → Lenovo → Lenovo
Rescue System.
After starting Rescue System, click System Backup to back up your system
partition by following the prompts.
4.5 System Recovery
Reboot your computer into the system recovery environment. You can choose to
restore to a system backup point or the initial state (factory default settings).
4.6 Create Recovery Disc
Create a bootable recovery disc from the current system. These recovery discs
are used to boot your computer and will guide you through the entire restoration
process.
In the Windows system, click Start → All Programs → Lenovo → Lenovo
Rescue System.
After starting Rescue System, click Create Recovery Disc to create a bootable
recovery disc from the current system.
Follow the on-screen prompts to create a recovery disc.
38 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting and
Confirming Setup
Chapter
1
2
3
4
5
6
This chapter contains the following
topics:
Ø
Troubleshooting and Problem Resolution
Note: The description of the TV tuner card in
this manual is only applicable to machines
which have the TV tuner card. It does not
apply to machines that do not have a TV
tuner card.
User Guide 39
Download from Www.Somanuals.com. All Manuals Search And Download.
Solving Problems
Follow these tips when troubleshooting your computer:
• If you added or removed a part before the problem started, review the
installation procedures to ensure that the part is correctly installed.
• If a peripheral device does not work, ensure that the device is properly
connected.
• If an error message appears on the screen, write down the exact message. This
message may help support personnel diagnose and fix the problem(s).
• If an error message occurs in a program, see the program’s documentation.
5.1 Troubleshooting Display Problems
Problem: Blank screen or no image is displayed on the monitor.
Troubleshooting and problem resolution:
Check that the LCD screen has been turned on; If not, press the LCD On/Off
button to turn on the LCD.
If still cannot solve the problem, contact to Lenovo Customer Service.
Problem: You need to change the display property settings.
Setting display background and icon properties:
1. Right-click the desktop anywhere except over an icon, then select Personalize
from the pop-up menu.
2. From here, select the appropriate options to:
• Change the desktop background
• Select a screen saver
• Select colors and appearance options for icons and text
• Set resolution and colors in the Display Settings options
Problem: Ripple on screen.
Troubleshooting and problem resolution:
1. Check to see if any of the following devices are located less than one meter
from the computer: refrigerators, electric fans, electric dryers, UPS systems,
regulators, fluorescent lamps or other computers that may be generating
magnetic interference.
2. Move any interfering devices away from the computer.
3. If the problem persists, contact Lenovo Service.
40 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
5.2 Troubleshooting Audio Problems
Problem: No sound from the integrated speakers.
Troubleshooting and problem resolution:
• Adjust the Windows volume control — double-click the speaker icon in the
lower-right corner of your screen. Ensure that the volume is turned up and the
sound is not muted. Adjust the volume, bass, or treble controls to eliminate
distortion.
• Reinstall the audio driver.
• Disconnect any headphones from the headphone connector — sound from
the speakers is automatically disabled when headphones are connected to the
computer’s side-panel headphone connector.
Problem: No sound from headphones.
Troubleshooting and problem resolution:
• Check the headphone cable connection — ensure that the headphone cable is
securely inserted into the headphone connector.
• Adjust the Windows volume control — click or double-click the speaker icon in
the lower-right corner of your screen. Ensure that the volume is turned up and
the sound is not muted.
5.3 Troubleshooting Software Problems
Problem: You are unable to exit a running program normally.
Troubleshooting and problem resolution:
1. Open the Task Manager window by pressing Ctrl, Alt and Delete at the same
time.
2. Select the Application tab, select the problem program, then click the End
Task button.
Problem: You need to install or uninstall a program.
Problem resolution:
During installation never abort the install process by powering the system off or
through other drastic means. This can cause system program problems or even
failure during system initialization.
User Guide 41
Download from Www.Somanuals.com. All Manuals Search And Download.
During the uninstall process, never directly delete the files or folders. This is
harmful to the system, and might cause a system-wide malfunction.
Use the following procedure to properly uninstall programs:
1. Back up all documents and system settings related to the program before
removing it.
2. If the program has its own uninstaller, run it directly to uninstall the program.
3. If the program does not have its own uninstaller, then select Control Panel from
the Start menu.
4. From the Control Panel, choose Programs and Functions.
5. Find the applicable program from the Programs and Functions dialog box and
then select Uninstall/Modify.
6. Perform the instructions displayed to uninstall the software.
5.4 Troubleshooting Problems with Optical Drives and
Hard Disks
Problem: The Optical drive is unable to read a CD/DVD.
Troubleshooting and problem resolution:
1. Check to determine if there is an optical drive icon in the resource manager
of the operating system. If not, restart your computer. If there is still no icon,
contact Lenovo Service. Otherwise, continue with the next step of this
procedure.
2. Confirm that the CD/DVD has been properly placed in the drive. If not, reload
the CD or DVD. Otherwise, continue with the next step of this procedure.
3. Check the specifications that came with your computer to confirm that this
optical drive is capable of reading this type of CD or DVD.
4. If the CD/DVD cannot be read, replace it with a known good CD/DVD such as
one that was shipped with the computer.
5. If the known good CD cannot be read, visually check the operating side of the
CD/DVD for defects.
Problem: The capacity of the hard disk, as indicated by the system, is less than
the nominal capacity.
Troubleshooting and problem resolution: For computers equipped with the
OneKey Recovery feature, the system recovery feature needs to occupy some
hard disk space. This may account for the apparent hard disk capacity deficit.
42 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Further Technical Explanation: The nominal capacity of the hard disk is
expressed in the decimal system as 1000 bytes. But the actual hard disk capacity
is expressed in the binary system as 1024 bytes (For example, the nominal
capacity 1G is 1000M, while the actual capacity 1G is 1024M).
The capacity of the hard disk shown in Windows can be calculated according to
the calculations in the following example:
The nominal capacity of the hard disk is 40G, while its actual capacity should
be: 40 x 1000 x 1000 x 1000/(1024 x 1024 x 1024) = 37G.
If the Service partition of 3G - 3 x 1000 x 1000 x 1000/(1024 x 1024 x 1024) =
2.79G is subtracted, the capacity of the hard disk shown in the system can
be obtained.
The capacity of the hard disk as calculated using this method may be slightly
different from the actual capacity due to the rounding of totals.
5.5 Special considerations for troubleshooting Windows
1. Record the serial number of the computer as it may be useful later when
troubleshooting system problems. The serial number was shipped with the
computer and provided separately by the manufacturer. The Help Center is
unable to retrieve this number.
2. The drivers for this computer model only support the Windows 7 system.
3. When you use the Windows Media Center to watch TV, be particularly attentive
to the following:
• In the following two situations, you must re-save a channel list:
a. When you change your TV signal from digital to analog, your saved
channel list for digital TV is deleted. When you want to watch digital TV
again, you must create and save a new channel list.
b. When you change your TV signal from analog to digital, your saved
channel list for analog TV is deleted. When you want to watch analog TV
again, you must create and save a new channel list.
• You must set the TV tuner input signal to analog before you can watch
Teletext programming.
User Guide 43
Download from Www.Somanuals.com. All Manuals Search And Download.
5.6 Performing Daily Maintenance Tasks
Cleaning the computer components
Because many of the computer components consist of sophisticated integrated
circuit boards, it is very important to periodically clean the computer to prevent
dust buildup. The cleaning supplies you need to clean the components include:
a vacuum cleaner, a soft cotton cloth, clear water (preferably purified or distilled
water) and cotton swabs.
Attention: Before you clean your computer, disconnect the computer
from the electrical outlet. Clean your computer with a soft cloth
dampened with water. Do not use liquid or aerosol cleaners, which may
contain flammable substances.
Note: To avoid damaging the computer or display, do not spray cleaning
solution directly onto the display. Only use products specifically designed
for cleaning displays, and follow the instructions included with the product.
The following are general methods for cleaning the components:
• You can use a soft cloth to remove dust on the surface of the computer, the
monitor, the printer, the speakers and the mouse.
• You can use a vacuum cleaner to clean in otherwise inaccessible corners.
• To clean the keyboard thoroughly, shut down the computer and scrub it gently
with a wet cloth. Do not use the keyboard until it is dry.
Do not do any of the following:
• Allow water to enter the computer.
• Use a heavily dampened cloth.
• Spray water directly onto the surface of the monitor or inside the computer.
LCD monitors should be cleaned daily. Use a dry cloth to brush dust from the
monitor and keyboard every day. Keep all surfaces clean and free of grease stains.
44 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter
Hardware Replacement Guide
1
This chapter contains the following
topics:
2
3
4
5
6
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Removing the computer cover
Installing a wall mount bracket adapter
Installing a B-CAS card
Replacing a memory module
Replacing the optical drive
Replacing the hard disk drive
Replacing the keyboard and mouse
Replacing the power cord
User Guide 45
Download from Www.Somanuals.com. All Manuals Search And Download.
6.1 Overview
This guide is intended to be used by customers who are replacing Customer
Replaceable Units (CRUs) as well as trained service personnel who are replacing
Field Replaceable Units (FRUs). In this guide, CRUs and FRUs will often be referred
to as parts.
Note: Trained service personnel should refer to the Hardware Maintenance
Manual (HMM) for parts ordering information.
This guide does not include procedures for all parts. It is expected that cables,
switches, and certain mechanical parts can be replaced by trained service
personnel without the need for step-by-step procedures.
Note: Use only parts provided by Lenovo®.
The description of the TV-Tuner card in this manual applies only to those computer
models that have the TV-Tuner card installed. It does not apply to those computer
models that do not have the TV-Tuner card installed.
This guide contains procedures for replacing the following parts:
• Memory modules
• Hard disk drive
• Optical drive
• Keyboard, mouse (wired)
• Power cord
Safety information for replacing CRUs
Do not open your computer or attempt any repairs before reading the “Important
safety information” in the Safety and Warranty Guide that was included with your
computer. If you no longer have this copy of the Safety and Warranty Guide, you
can obtain one online from the Support Web site at
46 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information resources
If you have Internet access, the most up-to-date information for your computer is
available from the World Wide Web.
You can find the following information:
• CRU removal and installation information
• Publications
• Troubleshooting information
• Parts information
• Links to other useful sources of information
Tools required
To disassemble the computer, you need the following tools:
• Wrist grounding strap and conductive mat for preventing electrostatic discharge
• Flat screwdriver
• Phillips screwdriver
• Hex screwdriver
• Plastic flat screwdriver
• Plastic tweezers
Note: The screws for the different components vary in size. During the
disassembly procedure, group the screws with their corresponding
components to avoid a mismatch when replacing the components.
User Guide 47
Download from Www.Somanuals.com. All Manuals Search And Download.
Handling static-sensitive devices
Static electricity, although harmless to you, can seriously damage computer
components.
When you are replacing a part, do not open the anti-static package containing the
new part until the defective part has been removed from the computer and you are
ready to install the new part.
When you handle parts and other computer components, take these precautions
to avoid static electricity damage:
• Limit your movement. Movement can cause static electricity to build up around
you.
• Always handle parts and other computer components carefully. Handle
adapters, memory modules, system boards, and microprocessors by the
edges. Never touch any exposed circuitry.
• Prevent others from touching the parts and other computer components.
• Before you replace a new part, touch the anti-static package containing the
part to a metal expansion slot cover or other unpainted metal surface on the
computer for at least two seconds. This reduces static electricity in the package
and your body.
• When possible, remove the new part from the anti-static packaging, and install
it directly in the computer without setting the part down. When this is not
possible, place the anti-static package that the part came in on a smooth, level
surface and place the part on it.
• Do not place the part on the computer cover or other metal surface.
48 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
6.2 Replacing hardware
Attention: Do not remove the computer cover or attempt any repairs
before reading the “Important safety information” in the Safety and
Warranty Guide that was included with your computer or in the Hardware
Maintenance Manual (HMM) for the computer. To obtain copies of the
Safety and Warranty Guide or HMM, go to the Support Web site at:
Note: Use only parts provided by Lenovo.
6.2.1 General information
Pre-disassembly instructions
Before proceeding with the disassembly procedure, make sure that you do the
following:
1. Turn off the power to the system and all peripherals.
2. Unplug all power and signal cables from the computer.
3. Place the system on a flat, stable surface.
6.2.2 Removing the computer cover
Attention: Turn off the computer and wait 3 to 5 minutes to let it cool
down before removing the cover.
Note: It may be helpful to place the computer face-down on a soft flat
surface for this procedure. Lenovo recommends that you use a blanket,
towel, or other soft cloth to protect the computer screen from scratching
or other damage.
To remove the computer cover
1. Remove any media (disks, CDs, or memory cards) from the drives, shut down
the operating system, and turn off the computer and all attached devices.
2. Unplug all power cords from electrical outlets.
3. Disconnect all cables attached to the computer. This includes power cords,
input/output (I/O) cables, and any other cables that are connected to the
computer. Refer to “Left and right view” and “Rear view” for help with locating
the various connectors.
User Guide 49
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Remove the 2 cover pieces by sliding them in opposite directions as shown.
6.2.3 Mounting the computer onto a wall
The computer can be mounted onto a wall. Before doing this, you will first need to
install a UL listed VESA wall mount* (to be purchased separately) onto the back of
the computer.
To install a VESA wall mount
Note: It may be helpful to place the computer face-down on a soft flat
surface for this procedure. Lenovo recommends that you use a blanket,
towel, or other soft cloth to protect the touch screen from scratching or
other damage.
* VESA wall mount spec: VESA100, 100mm x 100mm, M4 bolts.
50 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Push the stand lock upward to unlock it and then slide the stand out.
1
2
3
2. Align the VESA wall mount with the mounting holes on the computer, and then
secure it to the computer with the 4 screws.
User Guide 51
Download from Www.Somanuals.com. All Manuals Search And Download.
6.2.4 Installing a B-CAS card
Attention: Before using the TV function, a B-CAS card will need to be
installed on to the computer. Follow the steps below to install the B-CAS
card.
Notes:
Before installing the B-CAS card, make sure that you do the following:
• Turn off the power to the system and all peripherals.
• Unplug all power and signal cables from the computer.
• Place the system on a flat, stable surface.
1. Remove the computer cover. Refer to “Removing the computer cover”.
2. Insert the B-CAS card into the card port.
3. Align then slide the computer cover back into position.
52 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
6.2.5 Replacing a memory module
Attention: Turn off the computer and wait 3 to 5 minutes to let it cool
down before removing the cover.
Note: It may be helpful to place the computer face-down on a soft flat
surface for this procedure. Lenovo recommends that you use a blanket,
towel, or other soft cloth to protect the touch screen from scratching or
other damage.
1. Remove any media (disks, CDs, or memory cards) from the drives, shut down
the operating system, and turn off the computer and all attached devices.
2. Unplug all power cords from electrical outlets.
3. Disconnect all cables attached to the computer. This includes power cords,
input/output (I/O) cables, and any other cables that are connected to the
computer. Refer to “Left and right view” and “Rear view” for help with locating
the various connectors.
4. Remove the computer cover. Refer to “Removing the computer cover”.
5. Push out the latches on both sides of the memory socket to release the memory
module and gently pull the memory module upward to remove it from its socket.
All of the memory modules can be removed by using the same procedure.
6. Align then insert the new memory module into the socket and push down on
the top edge of the memory module. Make sure the latches lock the memory
module in place.
7. Align then slide the computer cover back into position.
User Guide 53
Download from Www.Somanuals.com. All Manuals Search And Download.
6.2.6 Replacing the optical drive
Attention: Turn off the computer and wait 3 to 5 minutes to let it cool
down before replacing the optical drive.
To remove the optical drive:
Note: It may be helpful to place the computer face-down on a soft flat
surface for this procedure. Lenovo recommends that you use a blanket,
towel, or other soft cloth to protect the screen from scratching or other
damage.
1. Remove any media (disks, CDs, or memory cards) from the drives, shut down
the operating system, and turn off the computer and all attached devices.
2. Unplug all power cords from electrical outlets.
3. Disconnect all cables attached to the computer. This includes power cords,
input/output (I/O) cables, and any other cables that are connected to the
computer. Refer to “Left and right view” and “Rear view” for help with locating
the various connectors.
4. Remove the computer cover. Refer to “Removing the computer cover”.
5. Push down the pin that locks the optical disk drive to the chassis then use the
screwdriver push the disk out.
1
2
54 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Push a small iron stick (paper clip) into the small hole on the optical drive cover
so that the disk springs out as shown.
7. Remove the 2 screws that secure the optical drive to the metal bracket.
8. Use a small flat head screwdriver to press and push out the pins that secure the
cover to the disk.
9. Separate the cover from the defective optical drive.
User Guide 55
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Install the new optical drive as follows:
(1) Align the new optical drive with the cover, and then push the cover back
into position.
(2) Screw the metal bracket back onto the new optical drive.
(3) Slide the new optical drive into the drive bay.
11. Screw the new optical drive back onto the chassis.
12. Slide the computer cover back into position.
6.2.7 Replacing the hard disk drive
Attention: Turn off the computer and wait 3 to 5 minutes to let it cool
down before replacing the hard disk drive.
To replace the hard disk drive:
Note: It may be helpful to place the computer face-down on a soft flat
surface for this procedure. Lenovo recommends that you use a blanket,
towel, or other soft cloth to protect the screen from scratching or other
damage.
1. Remove the computer cover. Refer to “Removing the computer cover”.
56 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Push then slide the hard disk drive and bracket out of the chassis as shown.
1
2
3. Push the pins and release the hard disk drive from the bracket.
4. Install the new hard disk drive as follows:
Line up the new hard disk drive with the bracket and secure it with the pins.
5. Slide the hard disk drive and bracket back into position.
6. Slide the computer cover back into position.
User Guide 57
Download from Www.Somanuals.com. All Manuals Search And Download.
6.2.8 Replacing the keyboard and the mouse
Attention: Do not remove the computer cover or attempt any repairs
before reading the “Important safety information” in the Safety and
Warranty Guide that was included with your computer or in the Hardware
Maintenance Manual (HMM) for the computer. To obtain copies of the
Safety and Warranty Guide or HMM, go to the Support Web site at:
To replace the keyboard:
1. Remove any media (disks, CDs, or memory cards) from the drives, shut down
the operating system, and turn off the computer and all attached devices.
2. Unplug all power cords from electrical outlets.
3. Locate the connector for the keyboard. Refer to “Left and right view” and “Rear
view”.
Note: Your mouse will be connected to the USB connector at either side or
the rear of the computer.
4. Disconnect the defective keyboard cable from the computer and connect the
new keyboard cable to the same connector.
*
The mouse can be replaced using the same method.
58 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
6.2.9 Replacing the power cord
Attention: Do not remove the computer cover or attempt any repairs
before reading the “Important safety information” in the Safety and
Warranty Guide that was included with your computer or in the Hardware
Maintenance Manual (HMM) for the computer. To obtain copies of the
Safety and Warranty Guide or HMM, go to the Support Web site at:
To replace the power cord:
1. Remove any media (disks, CDs, or memory cards) from the drives, shut down
the operating system, and turn off the computer and all attached devices.
2. Locate the connector for the power cord. Refer to “Rear view”.
3. Disconnect the defective power cord from the computer and connect the new
power cord to the same connector.
User Guide 59
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix.
Declaration
Thank you for using Lenovo products.
Carefully read all documents shipped with your computer before you install and
use the product for the first time. Lenovo is not responsible for any loss except
when caused by installation and operations performed by Lenovo professional
service personnel. You are responsible if you fail to operate the product according
to instructions and requirements in the manuals included with your computer, or
operate the product inappropriately.
This manual could include technical inaccuracies or typographical errors. Changes
are made periodically to the information herein; these changes will be incorporated
in new editions of the publication.To provide better service, Lenovo reserves the
right to improve and/or modify the products and software programs described in
the manuals included with your computer, and the content of the manual, at any
time without additional notice.
The manuals included with your computer are provided to help you use Lenovo’s
products appropriately. For the configuration of the product, refer to the related
contract (if any) or product packing list, or consult the distributor for the product
sales.
The content of the manuals included with your computer is protected by copyright
laws and rules. None of the manuals included with your computer may be
reproduced or transcribed by any means or translated into any language without
prior written permission of Lenovo.
The software interface and function and hardware configuration described in
the manuals included with your computer might not match exactly the actual
configuration of the computer that you purchase.You are welcome to contact us
about the manuals included with your computer. For the latest information or any
questions or comments, contact or visit the Lenovo Web site:
60 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Trademarks
Lenovo and the Lenovo logo, IdeaCentre and IdeaCentre logo are trademarks of
Lenovo in the United States, other countries, or both.
Microsoft, Windows, and Windows Vista are trademarks of the Microsoft group of
companies.
Intel Inside is a trademark of Intel Corporation in the U.S. and/or other countries.
AMD, the AMD Arrow logo, ATI, AMD Athlon, AMD LIVE!, AMD Opteron, AMD
Phenom, AMD Sempron, Catalyst, Cool ‘n’ Quiet, CrossFire, PowerPlay, Radeon,
and The Ultimate Visual Experience are trademarks of Advanced Micro Devices,
Inc.
Other company, product, or service names referred to herein or in other Lenovo
publications may be trademarks or service marks of others.
All rights reserved.
Names or marks of certain companies mentioned in the manuals included with
your computer or this document do not necessarily indicate that related software
or hardware is included. The actual configuration of the product depends on the
packing list description.
Energy Star Statement
ENERGY STAR® is a joint program of the U.S. Environmental Protection Agency
and the U.S. Department of Energy aimed at saving money and protecting the
environment through energy efficient products and practices.
Lenovo is proud to offer our customers products with an ENERGY STAR compliant
designation. The following machine types have been designed and tested to
conform to the ENERGY STAR program requirement for computers at the time
of manufacture. For more information about ENERGY STAR ratings for Lenovo
• 10097/2566
• 10099/2568
• 10101/3363
• 10098/2567
User Guide 61
Download from Www.Somanuals.com. All Manuals Search And Download.
• 10100/4749
By using ENERGY STAR compliant products and taking advantage of the power-
management features of your computer, you reduce the consumption of electricity.
Reduced electrical consumption contributes to potential financial sayings, a cleaner
environment, and the reduction of greenhouse gas emissions.
Lenovo encourages you to make efficient use of energy an integral part of your
day-to-day operations. To help in this endeavor, Lenovo has preset the following
power-management features to take effect when your computer has been inactive
for a specified duration:
ENERGY STAR power-management features, by operating system
Microsoft Windows XP
Microsoft Windows Vista and
Windows 7
• Turn off monitor: After 15 minutes
• Turn off hard disk drives: Never
• System standby: After 20 minutes
• System hibernates: Never
Power plan: Balanced
• Turn off the display: After 10 minutes
• Put the computer to sleep: After
25 minutes
• Advanced power settings:
-
Turn off hard disk drives: After
20 minutes
-
Hibernate: Never
To awaken your computer from a Sleep or System Standby mode, press any
key on your keyboard. For more information about these settings, refer to your
Windows Help and Support information system.
62 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
|
