HEARTH PRODUCTS
KITS AND ACCESSORIES
775,289M
rev. a, 10/2008
screen face kit
MODeL raVeLLe™ 42
TM
instaLLatiOn instrUctiOns fOr instaLLinG screen
face kit fOr Use with the raVeLLe™ 42 Gas firePLace
kit cOntents (see Figure 1):
tOOLs neeDeD:
Phillips Head Screw Driver
Please ensure that all these parts are included
3/8” Socket/nut Driver
5/32” Allen Wrench or T-Handle Wrench
1 ea. Screen Face [Complete] (A)
1 ea. Two Upper Brackets w/Screws (B)
1 ea. Two Lower Brackets w/Speed Nuts (C)
1 ea. Mounting Hardware (D)
- 6 ea. #10 Washers
GeneraL infOrMatiOn
If you encounter any problems, need clarification of these instructions
or are not qualified to properly install this kit, contact you local distribu-
tor or dealer.
- 6 ea. 10-24 Hex Nuts
- 4 ea. 10-24 Allen Head Screws
- 2 ea. 1/4” 20 Phillips Head Screws
1 ea. Instruction Sheet
Read this instruction sheet in its entirety before beginning the installa-
tion.
all of these parts may scratch and bend, great care should be used
in handling them.
cat. no.
Model
Description
aLL warninGs anD PrecaUtiOns in the instaLLatiOn anD
OPeratiOn ManUaL PrOViDeD with the aPPLiance aPPLY tO
these instrUctiOns.
75029
screen-42
screen face, Double Door, Black
tUrn Off the firePLace anD aLLOw it tO cOMPLeteLY cOOL
BefOre PrOceeDinG.
a
instaLLatiOn instrUctiOns
step 1. Ensure the reveal corner is positioned as shown in Figure 1. If it
needs to be adjusted to the position shown in Figure 1, see Page
12 of the Installation and Operation Manual.
reveal corner
expanded View of
reveal corner
D
c
reveal corner
adjustment
for arch face
B
OnLY wrOnG
Figure 1 - Kit Contents
Figure 2
1
nOte: DiaGraMs & iLLUstratiOns are nOt tO scaLe
Download from Www.Somanuals.com. All Manuals Search And Download.
|