ST Back Screen
Assembly Instructions
Treker ST 00 & 10 Series
Manual No. 701-134M
Before You Start
Assembly Instructions
A detailed listing of parts for this accessory kit is provided
received. Please contact your local Land Pride dealer for
any missing hardware.
When you see this symbol, the subsequent
instructions and warnings are serious - follow
without exception. Your life and the lives of
others depend on it!
!
ALL DIRECTIONS REFERRING TO THE RIGHT AND
LEFT ARE WHEN THE OPERATOR IS ON THE
MACHINE.
IMPORTANT: Before you begin, read these
instructions and check to be sure all parts and tools
are accounted for. Please retain these installation
instructions for future reference and parts ordering
information.
Your ST Back Screen is exclusively designed for your
Land Pride ST Treker. Please read these installation
instructions and your ST Treker Operator’s Manual
thoroughly before beginning. Especially read information
relating to safety concerns. Also included in the
Operator’s Manual is important information on operation,
adjustment, troubleshooting, and maintenance for this
attachment (some manual sections do not apply to all
accessories).
General Information
These assembly instructions apply to the following ST
Back Screen Accessories listed below:
700-033A
ST Back Screen
1. Space the six 1-3/4" U-Clamps (#2) and the six 1-1/2"
U-Clamp Spacers (#3) on the roll cage.
Further Assistance
2. Center the Back Screen (#1) in the inside of the roll
cage.
Your dealer wants you to be satisfied with your new ST
Back Screen. If for any reason you do not understand
any part of this manual or are not satisfied with the
service received, the following actions are suggested:
3. Attach the Back Screen (#1) to the roll cage with the
six 1-3/4" U-Clamps (#2) using six 5/16" x 2-1/2" bolts
(#4) and the six 1-1/2" U-Clamp Spacers (#3).
1. Discuss the matter with your dealership service
manager making sure he is aware of any problems
you may have and that he has had the opportunity to
assist you.
4. Make adjustments to the Back Screen (#1) alignment
as needed. Fully tighten attaching hardware at this time.
2. If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
problem and request assistance.
3. For further assistance write to:
Land Pride Service Department
1525 East North Street
P.O. Box 5060
Salina, Ks. 67402-5060
E-mail address
© Copyright 2007
Printed
06/27/07
Download from Www.Somanuals.com. All Manuals Search And Download.
1
|