Specifications & Capacities
Disc Harrows
DH35 Series
Description
DH3510
DH3512
Drawbar Horsepower Requirement
Side Mainframe Construction
45-75 hp
55-80 hp
3" x 4" x 3/16" Wall tubing w/gusset
reinforcements
3" x 4" x 3/16" Wall tubing w/gusset
reinforcements
Max. Cultivation Width
Transport Width
10’- 6" Approx.
12’-0" Approx.
10’ -10" Base Unit
12’-4" Base Unit
Number of Bearings
12 for all Ten Foot Disc Configurations
12 for 9" Disc Spacing
16 for 7.5" Disc Spacing
Approx Weight Per Blade
with 7.5" Spacing
79 to 84 lbs
76 to 82 lbs
Approx Weight Per Blade
with 9" Spacing
87 to 93 lbs
81 to 86 lbs
Hitch Type
Pull-type w/clevis & hole for 1 1/4" pin
Hitch Frame Construction
Center Gang Beam Construction
Gang Swing Arm
3"x 3" x 1/4" Wall tubing w/hose carrier and jack mount
4"x 3" x 1/4" Wall tubing
4"x 3" x 1/4" Wall tubing
Main Frame Front Tube
Mainframe Width
5"x 3" x 1/4" Wall tubing
93"
Disc Size Selections
20" or 22" Notched or Smooth
Gang Axle Construction
Disc Bearings
1 1/8" Square Hi-strength Steel
Greaseable & Triple Sealed Ball Bearings
7.5" or 9"
Disc Spacing Choices
Forward Gang Angle Adjustment
Rear Gang Angle Adjustment
Front to Rear Leveling System
Single Pin Adjustment to 15, 16 1/2, 18, 19 1/2 or 21 degrees
Single Pin Adjustment to 12, 13 1/2, 15, 16 1/2 or 18 degrees
Manual crank
adjustment
Depth Control
Cylinder stroke control spacers
Hydraulic Cylinder
3"x 8" Cylinder with hoses and fittings
for Depth/Lift Control
Transport Tires & Rims
20" Rear Furrow Filler Pair
18" Rear Furrow Filler Pair
Disc Scrapers
Two 9.5L x 15 Tires Mounted on 15" x 6"
5-bolt Rims
Optional
Optional
Optional
Optional
Optional
Optional
Center Sweep Kit
Tongue Jack
Dual Wheel Transport Kit
Designs, specifications, features and information are subject to change without notice.
18
6*05/08
322-251S continued on next page
Download from Www.Somanuals.com. All Manuals Search And Download.
|