Land Pride Brush Cutter RCP26 Series User Manual

PARALLEL ARM HydRAulIC  
Hydraulic Driven  
Parallel Arm Rotary Cutter.  
RCP26 SERIES  
75 - 150 HP — 60”  
Min. tractor weight - 8,000 lbs.  
Reach of 15’6” horizontal, 11’5” vertical,  
9’1” below ground level  
All boom rotary cutters are not created equal. The Land  
Pride Parallel Arm Rotary Cutter has a unique name for a  
reason. designed to “reach out” and cut along roadsides,  
over guard rails, down ditchbanks and along side ponds,  
the parallel arm cutter has features not found on your  
typical boom cutter.  
First of all, it has a constant attitude! When the two cylinders  
that operate the two arm sections are activated, the attitude  
of the deck does not change; thanks to the parallel arm  
design. Lift the cutter head up, in or out to negotiate an  
obstacle, and your cutter deck position does not change; set  
the cutter head down at the same attitude as it was prior to  
the obstacle. This makes your work efficient!  
8
Moving this cutter up and around obstacles, in and out  
next to water or roadsides is what this cutter is all about.  
Save time and work efficiently with the boom mower that  
does more!  
The hydraulic breakaway feature of the parallel arm cutter  
is also not found on your standard boom cutter. When an  
immovable obstacle is hit with the cutter deck, instead of  
swinging the tractor around in a dangerous whip, the cutter  
deck and arms pivot to the rear, allowing you time to stop,  
or at least help the cutter deck pass the obstacle. You simply  
restore the cutter deck to its original position with the help  
of a hydraulic cylinder. You can also swing the cutter deck  
rearward enabling you to mow into a tight corner, again  
putting it back to its original setting with the hydraulic cylinder.  
In-line filter cleans hydraulic  
fluid before it re-enters  
reservoir.  
• 540 or 1000 RPM  
The cutter deck is operated by a hydraulic motor, which is  
run by a pump powered by the PTO of the tractor. A flow  
control valve is standard equipment to protect the hydraulic  
system of the cutter from the high GPM many of the newer  
tractors now utilize. The 35 gallon oil reservoir keeps the unit  
running cool, and the in-line filter continually cleans the oil  
each time it is returned to the reservoir.  
• Cat. 2 & 3  
• 10’ Transport width  
• 35 Gallon oil reservoir also serves as counterweight  
• 2” Cutting capacity  
• Front and rear chain guards  
• 3/16” Stump jumper protects deck from obstructions  
• Auxiliary weight rack on left side for balance  
• Oil pressure gauge  
The optional electronic package enables each of the arm  
and deck hydraulic cylinders to be activated by a toggle  
switch. You get instant response from the cylinder, which can  
be very difficult with the tractor’s hydraulic controls.  
• Hydraulic Outlets Needed: Max. 4 Min. 1  
• Optional screen for tractors without cabs  
• Optional gauge wheel deck  
Download from Www.Somanuals.com. All Manuals Search And Download.  

La Crosse Technology Universal Remote RS 204U CS User Manual
Land Pride Lawn Mower GS15 Series User Manual
LG Electronics CD Player L1733TR User Manual
LOREX Technology DVR L164 Series User Manual
Makita Sander BO370 User Manual
Marmitek Universal Remote Easycontrol 8 User Manual
Melissa Electric Shaver 638 138 User Manual
Melissa Microwave Oven 653 081 User Manual
Melitta Espresso Maker MEPE123B User Manual
Memorex MP3 Player MD6888 User Manual