Model: 616-143
Quick Setup Guide
DC: 072915
Atomic Projection Alarm Clock
Projection
Lens
Snooze/Backlight
Projection Arm
Rotation
(Front and
Back)
FRONT VIEW
Buttons
Projection
Focus
BACK VIEW
AC Power Jack
GPU280500150WD00
Model 616-143
Page | 1
Download from Www.Somanuals.com. All Manuals Search And Download.
4. 12/24 Hour Time Format
5. Hour
6. Minutes
7. Year
8. Month
9. Date
Press the SET/°F/°C button to exit, or wait 20 seconds without
pressing buttons to return to the normal time display.
FAHRENHEIT/CELSIUS
Press the SET/°F/°C button to select Fahrenheit or Celsius
temperature display.
SET TIME ALARM
1. Hold the ALARM button to enter alarm time set mode.
2. Use the +/TEMP or -/TIME buttons to adjust values.
3. Press the ALARM button to confirm adjustments and move to the
next item.
Alarm Time setting order:
1. Hours
2. Minutes
ACTIVATE / DEACTIVATE TIME ALARM
Press the ALARM button once to view alarm time.
Press the ALARM button again to activate the alarm.
Bell icon appears.
Press the ALARM button again to deactivate the alarm.
The bell icon disappears.
Alarm
Bell Icon
SNOOZE (Silences alarm temporarily)
Press the SNOOZE/LIGHT button to silence alarm for 10
minutes.
Zz will show.
When in snooze mode, press ALARM to stop alarm for one day.
Note: The alarm is crescendo sound. The alarm will sound for 2
minutes and then shut off completely.
Model 616-143
Page | 3
Download from Www.Somanuals.com. All Manuals Search And Download.
MOON PHASE
The segments that are highlighted will portray the part of the moon
that is lit. For instance, the moon will be blank during a new moon and
dark during a full moon. This is how this product is designed to best
view the on the display, what you will see in the sky. This cannot be
changed.
MANUAL WWVB RADIO-CONTROLLED TIME SEARCH
Press the -/TIME button to start or stop a manual signal search.
WWVB Icon will flash
For information about WWVB visit:
WWVB
Icon
BACKLIGHT
Press the SNOOZE/LIGHT button to activate the backlight for 5
seconds. The backlight will not remain on constantly.
PROJECTION (On/Off, rotate, focus)
Projection ON/OFF button: Slide to turn the projection off or on
when operating on AC power.
Projection Direction button: Press to rotate projection 180º.
Focus Wheel: Use the Focus wheel to focus the projected
image.
SIDE VIEW
Projection
Focus
Model 616-143
Page | 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Time/Outdoor Temperature Projection: The projection will alternate
between time and outdoor temperature every 5 seconds. This is not
adjustable.
Note:
On AC power the projection will be on constantly and alternate
between time and outdoor temperature (unless turned to OFF).
Using battery power, the projection and backlight will come on for
10 seconds when SNOOZE/LIGHT is pressed.
POSITION OUTDOOR SENSOR
Mount the outdoor sensor on a North-facing wall or in any well
shaded area. Under an eave or deck rail is preferred.
The maximum transmitting range to the atomic projection alarm is
over 300-feet (91 meters) in open air, not including walls.
SEARCH FOR OUTDOOR SENSOR
Hold the +/TEMP button for 3 seconds to search for the outdoor
sensor .
Outdoor Sensor
Reception icon
POSITION PROJECTION ALARM
The projection alarm has a wide base to sit on a desk or table.
Choose a location 6 feet or more from electronics such as
cordless phones, wireless gaming systems, televisions,
microwaves, routers, baby monitors, etc., which can prevent
signal reception.
Position near an exterior wall that faces Ft. Collins Colorado for
WWVB time signal reception.
Place within 300 ft. (91 meters) of the outdoor sensor.
Obstacles such as walls, windows, stucco, concrete and large
metal objects can reduce the range.
Be aware of electrical wires and plumbing within a wall. This will
interfere with RF (radio frequency) signal reception.
Model 616-143
Page | 5
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
+32°F to +122°F (0°C to 50°C)
Indoor:
Temperature Range:
Interval:
About every 30 seconds
Outdoor:
Temperature Range:
Alkaline Batteries:
Lithium Batteries:
-40°F to 140°F (-40°C to 60°C)
-20°F to 140°F (-28.8°C to 60°C)
-40°F to 140°F (-40°C to 60°C)
Temperatures below - 20°F
(-28.8°C) require Lithium
NOTE:
batteries in the outdoor sensor.
Over 300 ft. (91 meters)
RF 433MHz (open air)
About every 30 seconds
Distance:
Interval:
Power:
Projection Alarm
Primary Power:
AC: GPU280500150WD00
5-volt AC power adapter
(included)
Optional 3-AAA, IEC, LR3
batteries (not included)
Optional/Battery Backup
2-AA, IEC, LR6 batteries
(not included)
TX141-BV2 Sensor :
Battery Life:
Battery life is over 12 months
when using the AC adapter for
primary power
Projection Alarm
Battery Backup:
Battery life is over 24 months
when using reputable battery
brands for both Alkaline and
Lithium batteries
TX141-BV2 Sensor :
Dimensions:
7.09" x 3.62" x 2.87"
(180 x 92 x 73mm)
Projection Alarm:
1.57" x 0.79" x 5.12"
(40 x 20 x 130mm)
TX141-BV2 Sensor :
Model 616-143
Page | 6
Download from Www.Somanuals.com. All Manuals Search And Download.
LOW BATTERY ICON
When the low battery icon is displayed it warns to replace batteries.
If the icon is displayed in Outdoor Temperature section,
replace bateries in the outdoor sensor.
If the icon is displayed in Indoor Temperature section,
replace batteries in the projection alarm.
Low Battery
Icon
CARE AND MAINTENANCE
Do not mix old and new batteries
Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries
Always purchase the correct size and grade of battery most suitable for the
intended use.
Replace all batteries of a set at the same time.
Clean the battery contacts and also those of the device prior to battery
installation.
Ensure the batteries are installed correctly with regard to polarity (+and -).
Remove batteries from equipment with is not to be used for an extended
period of time.
Remove expired batteries promptly.
Improper use or unauthorized opening of housing voids warranty.
If the product is not working properly, change the batteries and/or check the
A/C cord connection.
WARRANTY AND SUPPORT
La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of
purchase) on this product relating to manufacturing defects in materials &
workmanship.
View full warranty details online at:
For warranty work, technical support or other information contact:
La Crosse Technology, Ltd
2830 South 26th St
La Crosse, WI 54601
Contact Support:
1-608-782-1610
Model 616-143
Page | 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Online Product Support:
Product Registration:
Protected under U.S. Patents: 5,978,738 | 6,076,044 | RE43903
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device must not be co-located or operating in conjunction with any other antenna
or transmitter.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user
authority to operate the equipment.
All rights reserved. This manual may not be reproduced in any form, even in part, or
duplicated or processed using electronic, mechanical or chemical process without the
written permission of the publisher.
This booklet may contain errors or misprints. The information it contains is regularly
checked and corrections are included in subsequent editions. We disclaim any
responsibility for any technical error or printing error, or their consequences.
All trademarks and patents are recognized.
Model 616-143
Page | 8
Download from Www.Somanuals.com. All Manuals Search And Download.
|