• For the connection of 8 detector
lines in addressable conventional
technology
• Individual detector addressing with
optional address module
• Individual setting of detector zone
function
• Lines monitored for wire breakage,
short circuit, and short to earth
Description
The Conventional Detector Interface GIF8-1 supports call point, automatic fire detector with or without alarm
eight detector zones in addressable conventional tech- verification, fault message contacts as well as contacts
nology in Fire Detection Control Panels Series BC216. for technical messages), the function of the detector
Up to 64 detectors (addresses) per detector line can zone can be set separately for each detector line.
be individually identified with the aid of an address mo-
dule.
The Conventional Detector Interface provides a proces-
sor of its own. At a possible central processing board
In the event of an alarm, the fire detection control panel failure, the diversified redundancy concept thus ensures
indicates the number of the detector that is activated reliable alarm recognition. Each input of the Conventio-
first and displays the optionally parameterised text in- nal Detector Interface is protected against overvoltage
formation. Depending on the type of detector (manual and thus provides high system stability.
Building Safety. Building Security.
A
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
GIF8-1_DBL_LST_EN_0804.PDF • PAGE 1
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
Download from Www.Somanuals.com. All Manuals Search And Download.
|