LST Smoke Alarm FSK700 2 User Manual

FireBrigadeKeyBox  
Accessories  
• Frames for flush mounting or for  
installation into stainless steel  
columns  
• Various inner doors and accessories  
for different locks  
• Protective cover for installation on  
outside facades  
• Power supply for heating of the  
outer door  
Flush Mounting Frame EZ700-2  
The Flush Mounting Frame EZ700-2 is used for  
the easy flush mounting of the Fire Brigade Key  
Boxes FSK700-2 and FSK700-2SX.  
When the building is structurally complete, the  
flush mounting frame is embedded in a wall and  
then the facade is completed.  
Afterwards, the fire brigade key box can be  
inserted into the flush mounting frame and it can  
be screwed on firmly by means of the two bolts.  
Later on, disassembly is possible in the same  
way.  
Specifications  
Dimensions W × H × D  
Weight  
275 × 245 × 160 (mm)  
3.3kg  
Order number  
Order name  
265751  
Flush Mounting Frame EZ700-2  
Building Safety. Building Security.  
A
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27  
FSK-ZBH_DBL_LST_EN_0820.PDF • PAGE 1  
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Inner doors and accessories  
Depending on which lock has been determined  
by the responsible fire brigade, different inner  
doors are available, which allow to accommodate  
the respective locks.  
The Inner Doors ITA-2 and ITA-3 are equipped  
with a lock for the use of a 7-pin profile half  
cylinder.  
The Inner Door ITB-2 can accommodate the  
double-bit locks type 2 and type 2005.  
The Inner Door ITF-2 can hold the double-bit lock  
type 70091/92.  
The Auxiliary Cylinder PHZ700-2 can be installed  
into the fire brigade key box instead of the profile  
half cylinder for the building key. In this case, one  
or more building keys are attached by means of  
a chain link.  
By means of the Mounting Bracket for Profile Half Cylin- can be easily upgraded from a two-key model to a  
der PHZAW700-2, a Fire Brigade Key Box FSK700-2SX version for three or four building keys.  
Specifications  
Inner door for profile half cylinder 30.5mm  
Dimensions W × H × D  
Weight  
108 × 150 × 5 (mm)  
500g  
Order number  
Order name  
265752  
Inner Door for Profile Half Cylinder 30.5mm ITA-2  
Inner door for profile half cylinder 35.5mm  
Dimensions W × H × D  
Weight  
108 × 150 × 5 (mm)  
500g  
Order number  
Order name  
265748  
Inner Door for Profile Half Cylinder 35.5mm ITA-3  
Inner door for double-bit lock type 2/2005  
Dimensions W × H × D  
Weight  
108 × 150 × 5 (mm)  
400g  
Order number  
Order name  
265753  
Inner Door for Double-bit Lock Type 2/2005 ITB-2  
Inner door for double-bit lock type 70091/92  
Dimensions W × H × D  
Weight  
108 × 150 × 5 (mm)  
400g  
Order number  
Order name  
265757  
Inner Door for Double-bit Lock Type 70091/92 ITF-2  
Building Safety. Building Security.  
A
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27  
FSK-ZBH_DBL_LST_EN_0820.PDF • PAGE 3  
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auxiliary cylinder  
Order number  
265744  
Order name  
Auxiliary Cylinder for FSK700-2/2SX PHZ700-2  
Mounting bracket for profile half cylinder  
Order number  
Order name  
265743  
Mounting Bracket for Profile Half Cylinder PHZAW700-2  
Power supply for heating NT700-1  
The standard equipment of the Fire Brigade Key  
Boxes FSK700-2 and FSK700-2SX includes a  
heating device, which consists of several SMD  
heating resistors that are placed on the drilling  
protection board. The heating device prevents  
the outer door from freezing in extreme weather  
conditions, and at the same time it keeps the  
interior of the safe dry.  
The heating device of the fire brigade key box  
can be easily powered by the Power Supply  
NT700-1.  
A built-in miniature circuit breaker protects the  
line side of the device.  
The power supply is accommodated in a surface-  
mount housing which is also suitable for moun-  
ting on a DIN rail.  
Specifications  
Operating voltage  
Output voltage  
Protection class  
Ambient temperature  
Dimensions W × H × D  
Colour  
230VAC +10/-15%, 50Hz  
24VAC  
IP30  
0°C to +70°C  
110 × 180 × 80 (mm)  
grey white  
Weight  
900g  
Order number  
Order name  
237700  
Power Supply for FSK Heating NT700-1  
Building Safety. Building Security.  
A
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27  
FSK-ZBH_DBL_LST_EN_0820.PDF • PAGE 4  
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED  
Download from Www.Somanuals.com. All Manuals Search And Download.  

KRK Speaker System VXT Series User Manual
Lathem Clock AT MSX User Manual
Lexmark Printer X782e XL User Manual
LG Electronics Cell Phone CE500 User Manual
LG Electronics Lawn Mower 29UB65 User Manual
Life Fitness Baby Gym 91X 0XXX 02 User Manual
LitterMaid Tent LMT100 User Manual
Makita Air Compressor MAC5500G User Manual
Meyer Sound Boating Equipment galileo 616 User Manual
Microsoft Video Game Console XBOX User Manual