• ADM loop technology with
Apollo/Discovery protocol
• Sensitivity selectable in 5 steps
• Optional connection of remote
indicator
• Constant response sensitivity
• Sealed electronics
Description
The Ionisation Smoke Detector AI-58000-500 was de- The influence of contamination of the measurement
veloped for the safe detection of a wide range of smoke system is compensated for by using intelligent evalu-
aerosols. The modern design of the ionisation chamber ation algorithms. With that, the response sensitivity of
allows to reliably evaluate the characteristics of fire. the detector is kept constant for a long time – a further
The dual chamber principle with measurement and refe- effective step to avoid false alarms.
rence chamber ensures the automatic compensation of
environmental impact.
The two LEDs with 360° visibility indicate the activated
condition of the detector. The detector address is se-
The response sensitivity of the detector can be adjus- lected by means of a code card in the detector base.
ted in 5 steps, via the fire detection control panel.
Therefore the detector can be changed without additi-
onal tools.
The proven ADM loop technology with Apollo/Discovery
protocol establishes a permanent communication be- The detector can be attached to various bases and it
tween the fire detection control panel and the detector. can be protected against theft.
That ensures a periodical function testing of the detec-
tor. In the control panel all types of fires are detected by
continuously comparing fire patterns.
Building Safety. Building Security.
A
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
AI-58000-500_DBL_LST_EN_0804.PDF • PAGE 1
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
Download from Www.Somanuals.com. All Manuals Search And Download.
|