• Thermal printer with 80 characters
per line
• Printout of event data, analogue
values of detectors, and system
configuration
• Optional stand-by battery can be
installed
• Installation into 19” rack possible
Description
The Protocol Printer DPU414 is connected to a fire de- configuration can be printed. If ADM loop technology is
tection control panel via a serial interface module.
used, the current analogue values of the detectors, the
Depending on the fire detection control panel, the log- analogue values of the previous 6 months, as well as a
ging includes the element text of the activated detector, maintenance recommendation for every single detector
the detector zone number, the detector number, date can be printed once or periodically as well.
and time as well as any change in the operating conditi-
on of the control panel at the beginning and at the end The protocol printer can be mounted into a 19“ cabinet
of the event. The data is printed as text in clear, with by means of the 19“ Kit DPU2-1E. The printer is supplied
80 characters per line. Furthermore, in conjunction with through the optional external AC-Adapter PW4007-E1.
Fire Detection Control Panels Series BC216 and BC016, In addition, an optional stand-by battery can be installed
the whole event memory and the parameterised system into the printer.
Specifications
Power supply
optional external AC-Adapter PW4007-E1
0°C to +40°C
Ambient temperature
Relative humidity
Dimensions W × H × D
Weight
30 – 80% (no condensation)
160 × 170 × 66.5 (mm)
580g
Order number
Order name
227003
Protocol Printer/Thermal DPU414-30B
Building Safety. Building Security.
A
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
DPU414-30B_DBL_LST_EN_0804.PDF • PAGE 1
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
Download from Www.Somanuals.com. All Manuals Search And Download.
|