LG Electronics Projection Television RU 44SZ63D User Manual
DLP Projection TV  
OWNER’S MANUAL  
MODELS: RU-44SZ63D  
RU-52SZ53D  
Please read this manual carefully before operating your set.  
Retain it for future reference.  
Record model number and serial number of the set.  
See the label attached on the back cover and quote this  
information to your dealer when you require service.  
LG Electronics U.S.A., Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
Important safeguards for you and your new product  
Your product has been manufactured and tested with your safety in mind. However, improper use can result in electrical  
shock or fire hazards. To avoid defeating the safeguards that have been built into your new product, please read and  
observe the following safety points when installing and using your new product, and save them for future reference.  
Observing the simple precautions discussed in this manual can help you get many years of enjoyment and safe operation  
that are built into your new product.  
This product complies with all applicable U.S. Federal safety requirements, and those of the Canadian Standards Association.  
1. Read Instructions  
All the safety and operating instructions should be read  
before the product is operated.  
9. Attachments  
Do not use attachments not recommended by the product  
manufacturer as they may cause hazards.  
2. Follow Instructions  
All operating and use instructions should be followed.  
10. Ventilation  
Slots and openings in the cabinet are provided for ventila-  
tion and to ensure reliable operation of the product and to  
protect it from overheating, and these openings must not  
be blocked or covered. The openings should never be  
blocked by placing the product on a bed, sofa, rug, or  
other similar surface. This product should not be placed in  
a built-in installation such as a bookcase or rack unless  
proper ventilation is provided or the manufacturer’s  
instructions have been adhered to.  
3. Retain Instructions  
The safety and operating instructions should be retained  
for future reference.  
4. Heed Warnings  
All warnings on the product and in the operating instruc-  
tions should be adhered to.  
5. Cleaning  
11. Power Sources  
Unplug this product from the wall outlet before cleaning.  
Do not use liquid cleaners or aerosol cleaners. Use a damp  
cloth for cleaning.  
This product should be operated only from the type of  
power source indicated on the marking label. If you are  
not sure of the type of power supply to your home, con-  
sult your product dealer or local power company. For prod-  
ucts intended to operate from battery power, or other  
sources, refer to the operating instructions.  
6. Water and Moisture  
Do not use this product near water, for example, near a  
bath tub, wash bowl, kitchen sink, or laundry tub, in a  
wet basement, or near a swimming pool.  
12. Power-Cord Polarization  
7. Accessories, Carts, and Stands  
This product is equipped with a polarized alternating-cur-  
rent line plug (a plug having one blade wider than the  
other). This plug will fit into the power outlet only one  
way. This is a safety feature. If you are unable to insert  
the plug fully into the outlet, try reversing the plug. If  
the plug should still fail to fit, contact your electrician to  
replace your obsolete outlet. Do not defeat the safety pur-  
pose of the polarized plug.  
Do not place this product on a slippery or tilted surface,  
or on an unstable cart, stand, tripod, bracket, or table.  
The product may slide or fall, causing serious injury to a  
child or adult, and serious damage to the product. Use  
only with a cart, stand, tripod, bracket, or table recom-  
mended by the manufacturer, or sold with the product.  
Any mounting of the product should follow the manufac-  
turer’s instructions, and should use a mounting accessory  
recommended by the manufacturer.  
13. Power-Cord Protection  
Power-supply cords should be routed so that they are not  
likely to be walked on or pinched by items placed upon or  
against them, paying particular attention to cords at  
plugs, convenience receptacles, and the point where they  
exit from the product.  
8. Transporting Product  
A product and cart combination should be moved with  
care. Quick stops, excessive force, and uneven surfaces  
may cause the product and cart combination to overturn.  
(Continued on next page)  
P A G E 3  
PORTABLE CART WARNING  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
(Continued from previous page)  
openings as they may touch dangerous voltage points or  
short-out parts that could result in a fire or electric shock.  
Never spill liquid of any kind on the product.  
14. Outdoor Antenna Grounding  
If an outside antenna or cable system is connected to the  
product, be sure the antenna or cable system is grounded  
to provide protection against voltage surges and built-up  
static charges. Article 810 of the National Electrical Code  
(U.S.A.), ANSI/ NFPA 70 provides information with regard  
to proper grounding of the mast and supporting structure,  
grounding of the lead-in wire to an antenna discharge  
unit, size of grounding conductors, location of antenna-  
discharge unit, connection to grounding electrodes, and  
requirements for the grounding electrode.  
19. Servicing  
Do not attempt to service this product yourself as opening  
or removing covers may expose you to dangerous voltage  
or other hazards. Refer all servicing to qualified service  
personnel.  
20. Damage Requiring Service  
Unplug this product from the wall outlet and refer servic-  
ing to qualified service personnel under the following con-  
ditions:  
a. If the power-supply cord or plug is damaged.  
Example of Grounding According to National Electrical  
Code Instructions  
b. If liquid has been spilled, or objects have fallen into  
the product.  
c. If the product has been exposed to rain or water.  
Ground Clamp  
d. If the product does not operate normally by following  
the operating instructions. Adjust only those controls that  
are covered by the operating instructions as an improper  
adjustment of other controls may result in damage and will  
often require extensive work by a qualified technician to  
restore the product to its normal operation.  
Antenna Lead in Wire  
Antenna Discharge Unit  
(NEC Section 810-20)  
Grounding Conductor  
(NEC Section 810-21)  
Electric Service  
Equipment  
Ground Clamps  
e. If the product has been dropped or the cabinet has  
been damaged.  
Power Service Grounding  
Electrode System (NEC  
Art 250, Part H)  
Fig. 1  
f. If the product exhibits a distinct change in perfor-  
mance.  
NEC - National Electrical Code  
21. Replacement Parts  
15. Lightning  
When replacement parts are required, be sure the service  
technician has used replacement parts specified by the  
manufacturer or have the same characteristics as the origi-  
nal part. Unauthorized substitutions may result in fire,  
electric shock, or other hazards.  
For added protection for this product (receiver) during a  
lightning storm, or when it is left unattended and unused  
for long periods of time, unplug it from the wall outlet and  
disconnect the antenna or cable system. This will prevent  
damage to the product due to lightning and power-line  
surges.  
22. Safety Check  
Upon completion of any service or repairs to this product,  
ask the service technician to perform safety checks to  
determine that the product is in proper operating condi-  
tion.  
16. Power Lines  
An outside antenna system should not be located in the  
vicinity of overhead power lines or other electric light or  
power circuits, or where it can fall into such power lines or  
circuits. When installing an outside antenna system,  
extreme care should be taken to keep from touching such  
power lines or circuits as contact with them might be  
fatal.  
23. Wall or Ceiling Mounting  
The product should be mounted to a wall or ceiling only as  
recommended by the manufacturer. The product may slide  
or fall, causing serious injury to a child or adult, and seri-  
ous damage to the product.  
17. Overloading  
Do not overload wall outlets and extension cords as this  
can result in a risk of fire or electric shock.  
24. Heat  
The product should be situated away from heat sources  
such as radiators, heat registers, stoves, or other products  
(including amplifiers) that produce heat.  
18. Object and Liquid Entry  
Never push objects of any kind into this product through  
P A G E 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Safety Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . .2 AUDIO Menu Options . . . . . . . . . . . . . . . . . . . . .31-32  
Important Safety Instructions . . . . . . . . . . . . . . . . .3-4 TIME Menu Options  
Function Status Indicators . . . . . . . . . . . . . . . . . . . . .6  
Step 1. Hook Up TV  
Auto Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . .33  
Manual Clock Setup . . . . . . . . . . . . . . . . . . . . . . . .34  
TV Turn Off Timer Setup . . . . . . . . . . . . . . . . . . . . .35  
TV Turn On Timer Setup . . . . . . . . . . . . . . . . . . . . .36  
Sleep Timer Setup . . . . . . . . . . . . . . . . . . . . . . . . .37  
Auto Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38  
SPECIAL Menu Options  
Aspect Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . .39  
On-Screen Menu Languages . . . . . . . . . . . . . . . . . . 40  
Captions Setup . . . . . . . . . . . . . . . . . . . . . . . . . . .41  
Caption/Text Mode Selection . . . . . . . . . . . . . . . . . .42  
Key Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43  
Cinema Mode Setup . . . . . . . . . . . . . . . . . . . . . . . .44  
Demo (Menu Review) . . . . . . . . . . . . . . . . . . . . . . .45  
Rear Connections Panel . . . . . . . . . . . . . . . . . . . . . . .7  
Front Connections Panel . . . . . . . . . . . . . . . . . . . . . .8  
ANT/Cable Service Hookup . . . . . . . . . . . . . . . . . . . . .9  
Cable Box Connections . . . . . . . . . . . . . . . . . . . . . . .10  
VCR Connections . . . . . . . . . . . . . . . . . . . . . . . . . . .11  
DVD Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12  
RGB-DTV/DVI-DTV Input . . . . . . . . . . . . . . . . . . . . . .13  
RGB-PC/DVI-PC Input . . . . . . . . . . . . . . . . . . . . . . .14  
External Stereo Connections . . . . . . . . . . . . . . . . . . .15  
Home Theater: Speaker Layout . . . . . . . . . . . . . . . . .16  
Monitor Out Setup . . . . . . . . . . . . . . . . . . . . . . . . .17  
Remote Control Functions in TV Mode . . . . . . . . . . .18-19  
On-Screen Displays . . . . . . . . . . . . . . . . . . . . . . . . .20  
Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . .21  
Step 2. Customize your TV’s Features  
LOCK Menu Options  
Parental Lock Setup . . . . . . . . . . . . . . . . . . . . . . . .46  
Parental Lock (Ratings Overview) . . . . . . . . . . . . . . .47  
Step 3. Miscellaneous  
Programming the Remote . . . . . . . . . . . . . . . . . . . . .48  
Programming Codes . . . . . . . . . . . . . . . . . . . . . .49-52  
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . .54-55  
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56-57  
Product Specifications . . . . . . . . . . . . . . . . . . . . . .58  
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59-60  
SETUP Menu Options  
EZ Scan (Channel Search) . . . . . . . . . . . . . . . . . . . .22  
Channel Add/Delete/Surf Setup . . . . . . . . . . . . . . . .23  
Channel Labels Setup . . . . . . . . . . . . . . . . . . . . . . .24  
Main Picture Source Selection . . . . . . . . . . . . . . . . . 25  
PIP (Picture-in-Picture) / Twin Picture Operation . . . . . .26  
POP (Picture-outside-Picture) . . . . . . . . . . . . . . . . .27  
Booster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28  
VIDEO Menu Options . . . . . . . . . . . . . . . . . . . . .29-30  
Setup Checklist  
Step 1. Make all equipment and source connections.  
See pages 10-17.  
Step 2. Install batteries in remote control and do a channel search.  
See page 22.  
Step 3. Adjust TV features and options to your preference.  
See contents above.  
Note: Design and specifications are subject to change without prior notice.  
P A G E 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function Status Indicators  
Lamp indicator, operation indicator, and temperature indicator located below the front panel controls,  
reveal the operating status of the DLP projection TV.  
Operation Indicator  
Temperature Indicator  
Lamp Indicator  
ff  
Power cord is not connected.  
Red  
Power Cord is connected, TV is in standby mode.  
TV turns on.  
Operation Indicator  
Lamp Indicator  
Green  
Orange (flashing)  
Orange  
Preparing operation in standby mode.  
Projection lamp is reaching the end of its life and needs to  
be replaced with a new lamp. Contact your service center.  
There is a problem with the lamp or around it. Contact an  
authorized service center.  
Red (flashing)  
Green (flashing)  
Orange  
The lamp cover is not closed.  
The projection TV is overheating. Check the blocked vents of  
the projection TV and the accumulated dust in the dust filter.  
The projection TV shut down due to overheating.  
The projection TV shut down, check the cooling fan. Contact  
your service center.  
Temperature Indicator  
Red  
Red (flashing)  
P A G E 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rear Connections Panel  
Connecting cables and external equipment to your TV.  
This manual explains the features available  
on the RU-44SZ63D TVs.  
RF Connector: Antenna  
Used to connect analog  
cable or antenna signals to  
the television, either  
directly or through your  
cable box.  
ANT IN  
+75 Ω  
RGB INPUT  
S-VIDEO In  
PC/DTV  
A connection available with  
some high-end equipment  
that provides even better  
picture quality for Video 2.  
(XGA  
S-VIDEO  
/480p  
/720p  
/1080i)  
COMPONENT  
INPUT2 INPUT1  
C
A
L
MONITOR  
OUT  
VIDEO  
INPUT 2  
VIDEO  
INPUT 1  
RGB/DVI INPUT  
PC and HD-STB Input  
Used to connect from a PC  
source or HD-STB Satellite  
system.  
I
Video 1 or 2  
B
R
A
T
(L)  
AUDIO  
(R)  
Y
VIDEO  
Connects the video sig-  
nals from various types of  
equipment.  
I
O
N
PB  
PR  
(L)  
AUDIO  
(R)  
MONO  
AUDIO  
CENTER  
MODE IN  
Left/Right Audio  
Used for stereo sound  
from various types of  
equipment.  
PC/DTV  
(XGA  
/480p  
/720p  
/1080i)  
A
V
A
R
I
U
D
I
(L)  
AUDIO  
(R)  
(L)  
AUDIO  
(R)  
O
DVI INPUT  
A
B
L
O
U
T
Monitor Out  
Connects to a second TV or  
Monitor.  
E
DTV/DVD INPUT  
Y, Pb, Pr  
DVD Component Video and HD  
Component Video  
PC and HD-STB Audio  
Input  
Used for audio connections  
from a PC source or HD-STB  
Satellite system.  
Variable Audio Out  
Audio Center Mode In  
Connect to external Dolby  
Digital Center “preamp out-  
put.”  
Used to connect either  
an external amplifier, or  
add a sub-woofer to your  
surround sound system.  
Some top-of-the-line DVD players use what  
is called “component video,” for extremely  
accurate picture reproduction. Refer to  
your DVD manual for further information.  
Mini glossary  
JACK  
A connection on the back of a TV, VCR, or any other A/V device. This includes the RF jack and the Audio/Video jacks that are color-  
coded.  
SIGNAL  
Picture and sound traveling through cable, or over the air, to your television screen.  
P A G E 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Front Connection Panel  
There are four jacks on the left side on your projection TV that  
make connecting Audio/Video devices like video games and cam-  
corders very simple.  
The jacks are like those found on the back jack connection panel.  
This means that most equipment that connects to those types of  
jacks on the rear jackpack, may be connected to the front con-  
nection panel.  
To use the front jacks as the signal source, select them using  
Main Input menu as described on page 25. They will be named  
“Front Video” in the Main Input menu.  
If you input both Front Video and S-  
Video, only the S-Video will work.  
If you’re connecting a video game  
device, make sure to change the  
picture settings with the EZ Picture  
option in the Video menu (see page  
29).  
Front A/V Panel  
Left/Right Audio  
Used for stereo sound  
from various types of  
equipment.  
(R)  
AUDIO  
(L)/  
MONO  
VIDEO  
Video  
Connects the video  
signals from any  
S-VIDEO  
S-Video  
piece of equipment.  
FRONT A/V  
A connection available on  
some very high-end equipment  
that provides better picture  
quality than video input.  
Mini glossary  
A/V CABLES Audio/Video cables. Three cable connector—Right audio (red), Left audio (white), and Video (yellow). A/V cables are used for stereo  
playback of videocassettes and for higher quality picture and sound from other A/V devices.  
A/V DEVICE Any device that produces video or sound (VCR, DVD, cable box, or television).  
P A G E 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ANT / Cable Service Hookup  
Cable TV  
Wall Jack Panel  
Antenna  
Connect an antenna or cable service to your  
TV as shown.  
1
RF Coaxial Wire  
(75 ohm)  
RF Coaxial Wire  
(75 ohm)  
Turn to page 22 to do a channel search  
with EZ Scan for Ant/Cable connection(s).  
2
ANT IN  
+75  
Ω
S-VIDEO  
MONITOR  
OUT  
VIDEO  
INPUT 2  
VIDEO  
INPUT 1  
VIDEO  
(L)  
AUDIO  
(R)  
MONO  
If you receive your RF signal  
through an antenna that is several  
years old and connects with two  
small prongs, you will need to pur-  
chase a 300 to 75 ohm adapter. It  
should be available from your local  
electronics dealer.  
We recommend using a 75 ohm  
cable for your antenna connections  
in order to prevent  
interference.  
For best signal reception, it is recommended to have your Antenna professionally adjusted.  
P A G E 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cable Box Connections  
Cable TV  
Wall Jack Panel  
Locate the output jack on the back of  
1
your cable box. Connect this to the  
Antenna jack on the back of your TV.  
Or find the composite video and audio  
jacks on the back of your cable box, and  
connect them following the instructions  
provided with your equipment.  
In  
Out  
Output  
Switch  
3
4
This can be combined with any other  
equipment you may want to hook up.  
RF Coaxial Wire  
(75 ohm)  
ANT IN  
+75  
Ω
Cable Box  
S-VIDEO  
MONITOR  
OUT  
VIDEO  
INPUT 2  
VIDEO  
INPUT 1  
VIDEO  
Audio  
Video  
R
L
(L)  
AUDIO  
(R)  
TV  
MONO  
VCR  
If you’re using a cable box, leave the TV on  
channel 3 or 4 and use your cable box to  
change channels.  
P A G E 1 0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VCR Connections  
Locate the Antenna jack on the  
1
back of your TV. Connect this to  
RF out jack on the back of your  
VCR.  
Or, find the composite video and  
audio jacks on the back of your  
VCR, and connect them following  
the instructions provided with  
your equipment.  
Cable TV  
Wall Jack Panel  
You may connect either the com-  
posite video or the S-Video cables  
to your TV. (Do not connect both  
the composite and the S-Video  
cables. In the event that you con-  
nect both composite and the S-  
Video cables, only the S-Video will  
work.)  
Antenna  
ANT IN  
+75 Ω  
Round Wire  
(75 ohm)  
RF Coaxial Wire  
(75 ohm)  
S-VIDEO  
MONITOR  
OUT  
VIDEO  
INPUT 2  
VIDEO  
INPUT 1  
Back AV Panel  
VIDEO  
Output  
Switch  
In  
3
4
(L)  
AUDIO  
(R)  
Out  
S-Video  
Audio  
Video  
MONO  
R
L
A/V cables  
not included  
with TV  
VCR  
To hear stereo sound from cable or your VCR,  
you will need to connect A/V cables as well as  
the wire that runs from the VCR to your TV.  
If you want to receive your signals on Channel  
3 or 4, locate the Out to TV jack on your VCR.  
Connect a cable from the Out to TV jack to the  
Antenna In jack on the back of your TV.  
After connecting external equipment to the TV,  
don’t display a still picture for a long time on  
the screen. Doing so may damage the TV  
screen.  
P A G E 1 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Player  
Find the audio and component or  
1
S-Video jacks on the back of your  
DVD Player and connect them fol-  
lowing the instructions provided  
with your equipment.  
You may connect either the com-  
posite video or the S-Video cables  
to your TV. Do not connect both  
the composite and the S-Video.  
DVD Player  
Some high-end DVD players use a  
picture reproduction system  
called “component video.” If  
your DVD player has component  
output, use the connectors  
marked “Component 1/2” on the  
jack panel. Please refer to your  
DVD manual for proper installa-  
tion.  
Back AV Panel  
RGB INPUT  
PC/DTV  
(XGA  
S-VIDEO  
/480p  
/720p  
/1080i
Dolby Digital  
Audio  
S-Video  
Component Video  
COMPONENT  
Out  
L
R
C
A
L
MONITOR  
OUT  
VIDEO  
INPUT  
VIDEO  
INPUT  
INPUT2 INPUT1  
RGB/DVI INPUT  
2
1
I
B
R
A
T
I
O
N
(L)  
AUDIO  
(R)  
Y
VIDEO  
PB  
PR  
(L)  
AUDIO  
(R)  
MONO  
AUDIO  
CENTER  
MODE IN  
PC/DTV  
(XGA  
/480p  
/720p  
/1080i)  
A
V
A
R
I
U
D
I
(L)  
AUDIO  
(R)  
(L)  
AUDIO  
(R)  
O
A
B
L
DVI INPUT  
O
U
T
A/V Cables  
Not included  
with TV  
E
DTV/DVD INPUT  
Component 1 (or 2) Input  
• Component Input ports  
Connect DVD player jacks to Monitor  
Component input jacks as indicated below.  
Y
PB  
PR  
1920X1080i  
1280X720p  
720X480p  
720X480i  
Component input jacks  
Y
PB  
PR  
on the Monitor  
Pr  
Y
Y
Y
Y
Pb  
B-Y  
Cb  
Video output jacks  
on DVD player  
R-Y  
Cr  
PR  
PB  
Mini glossary  
COMPONENT VIDEO  
Some video equipment uses three separate lines (Y, PB, PR) to more precisely reproduce images. Your video equipment manual  
will explain how this relates to your equipment.  
P A G E 1 2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RGB-DTV/DVI-DTV Input  
Find the audio and Y, PB, PR/RGB/DVI jacks  
DBS Receiver  
1
2
on the back of your DBS receiver and con-  
nect them following the instructions provid-  
ed with your equipment.  
Component Out Dolby Digital  
Audio  
Y
Pb Pr  
Out  
L
R
COMPONENT  
C
A
L
INPUT2 INPUT1  
I
B
R
A
T
I
O
N
Y
Connect these cables to your TV as shown.  
PB  
PR  
PC/DTV  
(XGA  
/480p  
/720p  
/1080i)  
(L)  
AUDIO  
(R)  
A/V Cables  
Not included  
with TV  
DVI INPUT  
DTV/DVD INPUT  
DBS Receiver  
Audio  
Dolby Digital  
RGB INPUT  
L
R
Out  
PC/DTV  
(XGA  
/480p  
/720p  
/1080i)  
COMPONENT  
INPUT2 INPUT1  
C
A
L
RGB/DVI INPUT  
or  
I
B
R
A
T
(L)  
AUDIO  
(R)  
Y
I
O
N
PB  
PR  
A/V Cables  
Not included  
with TV  
AUDIO  
CENTER  
MODE IN  
PC/DTV  
(XGA  
/480p  
720p  
/1080i)  
A
V
A
R
I
U
D
I
(L)  
AUDIO  
(R)  
(L)  
AUDIO  
(R)  
O
A
B
L
The DTV shows the sharpest picture in 720p mode.  
DVI INPUT  
O
U
T
E
DTV/DVD INPUT  
This TV supports HDCP (High-bandwidth Digital Content  
Protection) protocol for DVI-DTV (480p, 720p, 1080i) mode.  
Select RGB-DTV Source and press ENTER. Use UP/DOWN arrows to  
select the desired options (H-Position/ V-Position/Phase) and then  
use LEFT/RIGHT arrows to make appropriate adjustments.  
In RGB-DTV mode, H-Position/ V-Position/Phase are not adjustable if  
you choose either the POP or Twin picture modes.  
RGB-DTV/DVI-DTV Input  
Signal  
480i  
480p  
720p  
1080i  
Component1  
Yes  
Component2  
RGB/DVI-DTV  
HD-SET TOP  
1920x1080i  
1280x720P  
720x480P  
Yes  
Yes  
Yes  
Yes  
No  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
P A G E 1 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RGB-PC/DVI-PC Input  
Find the audio and RGB or DVI jacks on the  
1
2
back of your PC and then connect them fol-  
lowing the instructions provided with your  
equipment.  
Connect these cables to your TV as shown.  
Computer  
RGB INPUT  
PC/DTV  
(XGA  
/480p  
/720p  
/1080i)  
COMPONENT  
C
A
L
INPUT2 INPUT1  
RGB/DVI INPUT  
I
B
R
A
T
(L)  
AUDIO  
(R)  
Y
I
O
N
PB  
PR  
AUDIO  
CENTER  
MODE IN  
PC/DTV  
(XGA  
/480p  
/720p  
/1080i)  
A
V
A
R
I
(L)  
AUDIO  
(R)  
U
D
I
(L)  
AUDIO  
(R)  
O
A
B
L
O
U
T
DVI INPUT  
E
DTV/DVD INPUT  
Select RGB-PC Source and press ENTER. Use UP/DOWN arrows to  
select the desired options (H-Position/V-Position/H-Size/V-  
Size/Phase) and then use LEFT/RIGHT arrow to make appropriate  
adjustments.  
- Horizontal position, Vertical position, Horizontal size, and Vertical  
size: Based on the input mode (resolution), the adjustment  
ranges may change.  
RGB-PC/DVI-PC Input  
Resolution Horizontal  
MODE  
Vertical  
70Hz  
60Hz  
72Hz  
75Hz  
56Hz  
60Hz  
72Hz  
75Hz  
60Hz  
70Hz  
75Hz  
Text  
640x350  
640x480  
640x480  
640x480  
800x600  
800x600  
800x600  
800x600  
1024x768  
1024x768  
1024x768  
31.5KHz  
31.5KHz  
37.9KHz  
37.5KHz  
35.2KHz  
37.9KHz  
48.1KHz  
46.9KHz  
48.4KHz  
56.5KHz  
60.0KHz  
- PHASE: Removes any horizontal noise and clears up or sharpens  
the character images. Adjustment range is -15 ~ + 15.  
VGA  
In DVI-PC mode, adjustments are only Vertical size,  
and Horizontal size.  
SVGA  
XGA  
In RGB-PC/DVI-PC modes, for POP or Twin screen, H-  
Position/V-Position/H-Size/V-Size/Phase are not  
adjustable.  
Synchronization input form: Signals are separate.  
P A G E 1 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
External Stereo Connections  
Connect Left/Right Variable Audio Output to an external Audio Amplifier System.  
Locate both Variable Audio Out  
jacks on the back of your TV and  
the Left/Right audio input jacks  
on the back of your stereo's  
amplifier.  
1
Connect these jacks, making sure  
that they are connected correctly.  
(red=Right, white=Left.)  
2
Adjust the sound on your stereo,  
according to directions provided  
with the amplifier.  
3
ANT IN  
+75  
Ω
RGB INPUT  
PC/DTV  
(XGA  
S-VIDEO  
/480p  
/720p  
/1080i)  
COMPONENT  
C
A
L
I
MONITOR  
OUT  
VIDEO  
INPUT 2  
VIDEO  
INPUT 1  
INPUT2 INPUT1  
RGB/DVI INPUT  
B
(L)  
AUDIO  
(R)  
Y
R
A
T
VIDEO  
I
O
N
PB  
(L)  
AUDIO  
(R)  
MONO  
AUDIO  
CENTER  
MODE IN  
PR  
Analog stereo amplifier  
PC/DTV  
(XGA  
/480p  
/720p  
/1080i)  
A
V
A
R
I
U
D
I
(L)  
AUDIO  
(R)  
(L)  
AUDIO  
(R)  
O
A
B
L
DVI INPUT  
O
U
T
E
DTV/DVD INPUT  
A/V cables  
not included  
with TV  
P A G E 1 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Home Theater: Speaker Layout  
This is a typical speaker layout.  
Any number of other speaker setups  
are possible, and some changes may  
be needed to maximize your sound.  
However, a Dolby Digital Receiver is  
required to hear 5.1 channel audio.  
Left and right speakers on each  
side of the TV enhance separation.  
The TV's sound optional hookup  
“center mode in,” makes the dialog  
sound as though it’s coming directly  
from the TV. The rear surround  
sound speakers provide  
the majority of other sounds, like  
those from special effects in movies.  
Your sub-woofer generates ultra-low  
frequency sound, for rumbling  
low-end audio.  
left  
speaker  
right  
speaker  
sub-woofer  
surround  
sound  
speaker  
surround  
sound  
speaker  
Sound is affected by  
speaker placement, so  
make sure nothing is in  
front of the speakers, and  
that they are aimed in  
appropriate directions.  
You have the option of  
turning the TV speakers on  
or off.  
P A G E 1 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Monitor Out Setup  
Your TV has a special signal output capa-  
bility which allows you to hook up a sec-  
ond TV or monitor.  
1
2
Just connect the second TV or monitor to  
the MONITOR OUT Audio/Video jacks locat-  
ed on the back of your TV. See the  
Operating Manual of the second TV or  
monitor for further details regarding that  
device’s input settings.  
ANT IN  
+75 Ω  
RGB INPUT  
Second TV  
PC/DTV  
(XGA  
S-VIDEO  
/480p  
/720p  
/1080i)  
COMPONENT  
C
MONITOR  
OUT  
VIDEO  
INPUT 2  
VIDEO  
INPUT 1  
A
L
INPUT2 INPUT1  
RGB/DVI INPUT  
I
B
R
A
T
(L)  
AUDIO  
(R)  
Y
VIDEO  
I
O
N
PB  
PR  
(L)  
AUDIO  
(R)  
S-Video  
PB  
Video  
Audio  
MONO  
AUDIO  
CENTER  
MODE IN  
PC/DTV  
(XGA  
/480p  
/720p  
/1080i)  
A
V
A
R
I
U
D
I
(L)  
AUDIO  
(R)  
(L)  
AUDIO  
(R)  
O
A
B
L
DVI INPUT  
O
U
T
E
DTV/DVD INPUT  
A/V Cables  
Not included  
with TV  
Component 1 - 2, RGB-DTV/PC, and DVI-DTV/PC  
input sources for main picture cannot be used  
for Monitor Out.  
P A G E 1 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control Functions in TV Mode  
MODE  
Selects the remote operating mode:  
TV, VCR, Cable, DVD and Satellite.  
Select other operating modes, for  
the remote to control external  
devices.  
INDICATOR LIGHTS  
Show active remote mode  
every time any button is  
pressed.  
VCR CABLE DVD  
TV  
SAT  
TV/VIDEO  
Selects: Analog, Video1, Video2,  
Front video, Component1-2, RGB,  
and DVI input sources.  
LIGHT  
MODE  
LIGHT  
POWER  
Illuminates the remote control  
keys.  
TV/VIDEO  
COMP1  
FRONT  
COMP2  
DVI  
FRONT  
Selects the front video signal if a  
device, such as a camcorder or  
game player, is connected to the  
front video input jack.  
DVI  
Selects: DVI-DTV and DVI-PC  
input sources.  
RGB  
1
4
7
2
5
8
0
3
6
9
MUTE  
Switches the sound on or off  
SURF  
Scrolls the Surf channel list.  
SAP  
Selects: Mono, Stereo, and SAP.  
FLASHBK  
ENTER  
VIDEO  
Adjusts the factory preset pic-  
ture according to the room.  
MUTE  
SURF  
PIP  
Toggles between PIP, POP  
(Picture-outside-Picture) and  
Twin picture mode.  
SAP  
VIDEO  
VOL  
CH  
SWAP  
Switches the picture from  
PIP, POP, or twin picture to  
the main screen.  
PIP  
PIPCH- PIPCH+ SWAP  
PIPCH-  
Changes to next lower  
PIP channel  
PIPCH+  
Changes to next higher PIP  
channel.  
CC  
FREEZE  
PIP INPUT  
RATIO  
THUMBSTICK  
Allows you to navigate the on-screen  
menus and to adjust the system set-  
FREEZE  
Captures and freezes the currently-  
viewed main picture.  
tings and preferences, by moving to  
D
an option withF  
G
and selecting the  
highliEghted option with  
.
MENU  
EXIT  
EXIT  
MENU  
Brings up the main menu  
to the screen.  
Clears all on-screen displays  
and returns to TV viewing  
from any menu.  
PLAY  
REW  
PAUSE STOP RECORD  
FF  
SKIP  
P A G E 1 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control Functions in TV Mode  
VCR CABLE DVD  
TV  
SAT  
MODE  
LIGHT  
POWER  
POWER  
Turns your TV or any other  
programmed equipment on or  
off, depending on mode.  
TV/VIDEO  
COMP1  
FRONT  
COMP2  
DVI  
RGB  
RGB  
COMPONENT 1, 2  
Selects component signal sources,  
such as DVD or HD receiver.  
Selects: RGB-DTV and RGB-PC  
input sources.  
1
4
7
2
5
8
0
3
6
9
NUMBER KEYPAD  
For direct channel selection and  
programming functions.  
ENTER  
When in the menu system and  
other on-screen displays, selects  
highlighted options.  
FLASHBK  
Tunes to the last channel  
viewed.  
FLASHBK  
ENTER  
MUTE  
SURF  
SAP  
VIDEO  
CHANNEL UP/DOWN  
Scrolls through available chan-  
nels in EZ Scan memory.  
VOL  
CH  
VOLUME UP/DOWN  
Increases/decreases the sound level.  
PIP  
PIPCH- PIPCH+ SWAP  
CC  
FREEZE  
PIP INPUT  
RATIO  
RATIO  
Changes the screen format or  
aspect ratio.  
PIP INPUT  
Selects the input source for the  
sub picture.  
CC  
Selects a closed caption mode for  
displaying captioning information  
if available on program.  
ENTER  
When in the menu system and  
other on-screen displays,  
selects highlighted options.  
MENU  
EXIT  
PLAY  
REW  
PAUSE STOP RECORD  
RECORD, PAUSE, REW, FFWD,  
PLAY, STOP  
FF  
SKIP  
Control the functions on your VCR.  
Playing CDs: Selects songs.  
Playing DVDs: Selects movie  
chapters.  
SKIP  
P A G E 1 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
On-Screen Displays  
This page describes your on-screen display and information banner options.  
Channel Label  
If a channel label has been set,  
then it will appear here.  
Main Channel Display  
Displays current channel number.  
PIP Display  
This display  
appears when PIP  
is active.  
TV 13  
MONO  
ABC  
TV 6  
AM 3:00  
10  
Time  
Mute  
Appears when  
pressing the enter  
button.  
Appears when  
sound is  
muted.  
Volume  
Volume level is displayed while  
adjusting the sound.  
P A G E 2 0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Front Panel Controls  
POWER MENU ENTER  
VOL  
CH  
1
3
6
4
5
8
2
7
POWER  
MENU  
1
2
ENTER (Same as ENTER button on your remote  
control)  
3
VOLUME UP / DOWN  
4
5
6
CHANNEL UP / DOWN  
Operation indicator. (See page 6).  
Lamp indicator. (See page 6).  
Temperature indicator. (See page 6).  
See menu pages for instructions on using the on-  
screen menus.  
7
8
The POWER, CHANNEL, TV/VIDEO, and VOLUME but-  
tons work just as they do on your remote control.  
If TV is moved from cold to normal room tempera-  
ture, humidity may form inside TV, wait 3 hours for  
TV to adjust to room temperature before turning it  
on.  
- This manual explains the features available on the RU-44SZ63D TVs.  
P A G E 2 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EZ Scan (Channel Search)  
Automatically finds analog channels available through  
ANT IN input, and stores all active over-the-air and cable  
channels in memory on the channel list.  
Processing EZ scan.  
EZ Scan  
Ch. Edit  
G
SETUP  
VIDEO  
AUDIO  
TIME  
Ch. Label  
Main Input  
Sub Input  
Booster  
SPECIAL  
LOCK  
MENU Prev.  
Refer to pages 7-17 to connect external  
1
equipment to your TV. If you have done  
so, plug in your TV to a standard (non-  
switched) 120V 60Hz power outlet.  
VCR CABLE DVD  
TV  
SAT  
MODE  
LIGHT  
POWER  
3
TV/VIDEO  
COMP1  
FRONT  
COMP2  
DVI  
If you have done so, remove the back of  
2
RGB  
the remote and install in two AA batter-  
ies. Make sure batteries are properly  
installed (check the +/– symbols).  
1
4
7
2
5
8
0
3
6
9
back of  
remote  
FLASHBK  
ENTER  
5/7  
MUTE  
SURF  
SAP  
VIDEO  
VOL  
CH  
With the remote control in hand, press  
the POWER button to turn your TV on.  
3
PIP  
PIPCH- PIPCH+ SWAP  
Press the MENU button on the remote  
4
CC  
FREEZE  
PIP INPUT  
RATIO  
control, then use the UP/DOWN arrow  
button to select the Setup menu.  
4/6  
5/7  
Press ENTER or the RIGHT arrow button  
5
to access the Setup menu.  
MENU  
EXIT  
Use the UP/DOWN arrow to select EZ  
Scan.  
4
6
PLAY  
REW  
PAUSE STOP RECORD  
4/6  
Press ENTER or the Right arrow button  
to start the EZ Scan channel search.  
FF  
7
SKIP  
P A G E 2 2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Channel Add / Delete / Surf Setup  
EZ Scan  
SETUP  
CATV  
TV  
ESPN  
TV 11  
Following Screen  
will let you edit  
channels and Surf List.  
Ch. Edit  
G
Shown  
2
3
4
5
VIDEO  
AUDIO  
TIME  
6
7
8
9
10  
15  
20  
25  
30  
35  
40  
45  
Ch. Label  
Main Input  
Sub Input  
Booster  
11  
16  
21  
26  
31  
36  
41  
12  
17  
22  
27  
32  
37  
42  
13  
18  
23  
28  
33  
38  
43  
14  
19  
24  
29  
34  
39  
44  
Surf List  
TV 11  
TV 20  
SPECIAL  
LOCK  
MENU  
Prev.  
(
)
MENU Previous  
Add/Delete  
Surf  
Move  
Create two different types of channel lists in memory: “Custom list” and “Surf  
list”.  
A custom list can be created by toggling each channel on or off with (Enter).  
Once a channel is highlighted, you will be able to see whether the channel is  
currently added or deleted by referring to the small window at the top-left cor-  
ner of the screen.  
You can create your own Surf list with up to 16 channels. It appears at the bot-  
tom-left corner of the screen.  
Press the Surf button on the remote control when a channel is highlighted to  
add or delete the channel in the Surf list.  
VCR CABLE DVD  
TV  
SAT  
MODE  
LIGHT  
POWER  
TV/VIDEO  
COMP1  
FRONT  
COMP2  
DVI  
RGB  
1
4
7
2
5
8
0
3
6
9
Press the MENU button on the remote  
control, then use the UP/DOWN arrow  
button to select the Setup menu.  
1
FLASHBK  
ENTER  
2/3/4  
MUTE  
SURF  
Press ENTER or the RIGHT arrow button  
to access the Setup menu.  
4
2
3
SAP  
VIDEO  
VOL  
CH  
PIP  
PIPCH- PIPCH+ SWAP  
Use the UP/DOWN arrow to select  
Ch.Edit and then press ENTER or right  
arrow.  
CC  
FREEZE  
PIP INPUT  
RATIO  
You will now see a screen filled with  
channel numbers and a preview picture.  
Use the UP/DOWN and LEFT/RIGHT arrow  
to select a channel, then use ENTER to  
Delete (remove the channel from the  
channel scan) or Add (include the chan-  
nel in the channel scan). Press SURF to  
add the channel to the Surf List.  
4
1/3/4  
2/3/4  
5
4
MENU  
EXIT  
1/5  
1/3/4  
PLAY  
REW  
PAUSE STOP RECORD  
FF  
5
SKIP  
Press EXIT to save and return to TV view-  
ing or press MENU to save and return to  
the previous menu.  
P A G E 2 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Channel Labels Setup  
EZ Scan  
SETUP  
ESPN  
TV 25  
A&E  
TBN  
HSN  
CNN  
VH-1  
PTL  
CMTV  
VC  
ESPN  
ABC  
TELE  
IC  
HSE  
CNBC  
VCR  
NOS  
ESP2  
ACTS  
TLC  
Ch. Edit  
VIDEO  
AUDIO  
TIME  
Ch. Label  
Main Input  
Sub Input  
Booster  
G
Following Screen  
will let you put  
the logos in channels.  
PBS  
ET  
PLAY  
EWTN  
AMC  
TNN  
ADC  
TMC  
JCN  
CSP2  
WB  
COM  
VISN  
QVC  
FNN  
BET  
INSP  
CSPN  
VJN  
FAM  
BCC  
TNT  
LIFE  
RDS  
FOX  
CTN  
SPECIAL  
LOCK  
MENU Prev.  
(
)
MENU Previous  
Add/Delete  
CH  
Change Channel  
Move  
Choose preset labels for your channels.  
Press the MENU button on the remote  
control, then use the UP/DOWN arrow  
button to select the Setup menu.  
1
Use Channel +/- on your remote control in the Ch. Label  
menu to select a channel for labeling, then choose a  
suitable label for the channel by pressing to attach  
the label to the selected channel.  
Press ENTER or the RIGHT arrow button  
to access the Setup menu.  
2
3
4
5
Use the UP/DOWN arrow to select the  
Ch. Label option.  
VCR CABLE DVD  
TV  
SAT  
Press ENTER or the RIGHT arrow to  
access the Ch. Label menu.  
MODE  
LIGHT  
POWER  
TV/VIDEO  
COMP1  
FRONT  
COMP2  
DVI  
You will now see a screen filled with  
Labels and a preview screen. Use channel  
UP/DOWN button on your remote to  
select the a channel to Label.  
RGB  
1
4
7
2
5
8
0
3
6
9
Use the UP/DOWN and LEFT/RIGHT arrow  
to select the appropriate label for the  
channel or to select a blank label sec-  
tion for making a channel name.  
6
FLASHBK  
ENTER  
2/4/6  
MUTE  
SURF  
6
5
SAP  
VIDEO  
VOL  
CH  
• Use the UP/DOWN/LEFT/RIGHT arrow  
and press ENTER to set the Label to  
the selected channel.  
PIP  
PIPCH- PIPCH+ SWAP  
CC  
FREEZE  
PIP INPUT  
RATIO  
• Use the UP/DOWN/ LEFT/RIGHT arrow  
and press SURF to edit channel name.  
Eight blank channel sections are avail-  
able.  
Use the LEFT/RIGHT arrow to select a  
word position and use the UP/DOWN  
arrow to change the letter. Press SURF  
to save.  
1/3/6  
2/4/6  
8
6
MENU  
EXIT  
1
PLAY  
REW  
PAUSE STOP RECORD  
1/3/6  
FF  
Repeat 5 and 6 steps until all channels  
are Labeled.  
7
8
SKIP  
Press EXIT to save and return to TV view-  
ing.  
P A G E 2 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Main Picture Source Selection  
Changes the picture source for the main screen so you  
can watch your TV, cable TV, VCR, DVD, or any other  
devices that are connected to your TV.  
SETUP  
VIDEO  
AUDIO  
TIME  
EZ Scan  
Ch. Edit  
Ant/Cable  
Video1  
Video2  
Ch. Label  
Main Input  
Sub Input  
Booster  
Front Video  
Component 1  
Component 2  
G
RGB-DTV  
DVI-DTV  
G
G
SPECIAL  
LOCK  
Prev.  
MENU  
Press the MENU button on the remote  
control, then use the UP/DOWN arrow  
button to select the Setup menu.  
1
VCR CABLE DVD  
TV  
SAT  
Press ENTER or the RIGHT arrow button  
to access the Setup menu.  
MODE  
LIGHT  
POWER  
2
TV/VIDEO  
COMP1  
FRONT  
COMP2  
DVI  
Use the UP/DOWN arrow to select Main  
Input.  
RGB  
3
1
4
7
2
5
8
0
3
6
9
Press ENTER or the RIGHT arrow to  
4
access the Main Input menu, then use  
the UP/DOWN or RIGHT arrow button to  
select a source. Your Main picture source  
options are : Ant/Cable, Video 1, Video  
2, Front Video, Component 1, Component  
2, RGB-DTV, RGB-PC, DVI-DTV, or DVI-PC.  
FLASHBK  
ENTER  
2/4  
MUTE  
SURF  
SAP  
VIDEO  
VOL  
CH  
PIP  
PIPCH- PIPCH+ SWAP  
Press EXIT to save and return to TV view-  
ing or press the LEFT arrow to save and  
return to the previous Menu.  
5
CC  
FREEZE  
PIP INPUT  
RATIO  
1/3/4  
5
1
2/4  
5
MENU  
EXIT  
PLAY  
REW  
PAUSE STOP RECORD  
1/3/4  
FF  
SKIP  
P A G E 2 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PIP (Picture-in-Picture) / Twin Picture Operation  
PIP lets you view 2 different inputs (sources) on your monitor screen at the same time. One source will be large, and the other  
source (PIP) will show a smaller inset image.  
Twin Picture splits the screen into 2, allowing 2 pictures to be shown on the TV screen at the same time. Each source is given half  
the screen.  
Watching PIP  
Press the PIP button to show the sub picture.  
Each press of PIP changes the PIP options as shown below.  
POP Mode  
Twin Picture Mode  
PIP Mode  
PIP / Twin Picture Source Selection  
Changes the picture source for the Sub Picture image so  
you can watch your TV, cable TV, VCR, or any other  
devices that are connected to your TV.  
Using the menu  
Press the MENU button on the remote control,  
then use the UP/DOWN arrow button to select  
the Setup menu.  
1
EZ Scan  
Ch. Edit  
SETUP  
VIDEO  
AUDIO  
TIME  
Press ENTER or the RIGHT arrow button to  
access the Setup menu.  
Ch. Label  
Main Input  
Sub Input  
Booster  
2
Use the UP/DOWN arrows to select the Sub  
Input option.  
G
Ant/Cable  
Video 1  
3
Video 2  
Press ENTER or the RIGHT arrow to access the  
Sub Input menu, then use the UP/DOWN  
arrow button to select the source. Your choic-  
es are: Ant/Cable, Video 1, Video 2, Front  
Video.  
4
Front Video  
SPECIAL  
LOCK  
MENU  
Prev.  
Press EXIT to save and return to TV viewing  
or press the LEFT arrow to save and return to  
the previous Menu.  
5
Do not display a fixed image on the screen for long  
periods of time. Doing so may cause image burn-in.  
Not all sources are available for PIP.  
Using the PIP INPUT button on the remote control  
Use the PIP INPUT button to select the input  
1
source for the sub picture.  
Each time you press PIP INPUT button, you toggle  
between Ant/Cable, Video 1, Video 2, and Front  
Video.  
P A G E 2 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PIP (Picture-in-Picture) / Twin Picture Operation  
Selecting PIP / Twin Picture Channels  
Press the PIP button on the remote control to select PIP or Twin picture mode.  
Select the Ant/Cable source with the PIP INPUT button.  
1
Use the PIPCH-/PIPCH+ button to select a channel for the sub picture.  
2
Swapping Pictures  
Press the SWAP button.  
Each time you press the SWAP button, you switch the Main and Sub pictures.  
It’s available to SWAP the Main and Sub picture in Ant/Cable, video 1-2, and front video input sources for Main picture.  
Main Picture  
Sub Picture  
Main Picture  
Sub Picture  
Moving the Sub Picture (PIP mode only)  
In the PIP mode, each press of the UP/DOWN/LEFT/RIGHT arrow buttons will  
move the sub picture to a different position on the screen.  
POP (Picture-outside-Picture)  
Use POP to search the pictures of all the programmed chan-  
nels one-by-one on the 3 POP screen display, while the main  
screen remains the current channel.  
Press PIP button on the remote control  
1
with the POP image on the screen to acti-  
vate POP (Picture-outside-Picture) mode.  
The pictures of all the programmed chan-  
nels are searched with the 3 POP screen, as  
shown to the right.  
• Press SWAP, to enlarge the selected  
channel being searched on the POP  
screen to view it on the Main screen.  
(It’s available to use this function in  
Ant/Cable input source for Main and Sub  
picture.)  
Press the EXIT button to exit POP mode.  
2
Run EZ Scan channel search before using POP mode.  
P A G E 2 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Booster  
If TV signal reception is poor because you are in a fringe area, set Booster  
to On. If the picture condition is good, set Booster to Off.  
EZ Scan  
Ch. Edit  
SETUP  
VIDEO  
AUDIO  
TIME  
Adjustments for one channel don’t affect the adjustment for other channels.  
Set booster to on or off for each channel separately.  
Ch. Label  
Main Input  
Sub Input  
Booster  
G
Off  
On  
SPECIAL  
LOCK  
MENU  
Prev.  
Press the MENU button on the remote  
control, then use the UP/DOWN arrow  
button to select the Setup menu.  
1
VCR CABLE DVD  
TV  
SAT  
MODE  
LIGHT  
POWER  
Press ENTER or the RIGHT arrow button  
to access the Setup menu.  
TV/VIDEO  
COMP1  
FRONT  
COMP2  
DVI  
2
RGB  
Use the UP/DOWN arrow to select  
Booster.  
3
1
4
7
2
5
8
0
3
6
9
Press ENTER or the RIGHT arrow to  
4
access the Booster menu, then use the  
UP/DOWN arrow button to select On or  
Off.  
FLASHBK  
ENTER  
2/4/5  
MUTE  
SURF  
SAP  
VIDEO  
Press EXIT to save and return to TV view-  
ing or press the ENTER arrow to save and  
return to the previous Menu.  
VOL  
CH  
5
PIP  
PIPCH- PIPCH+ SWAP  
CC  
FREEZE  
PIP INPUT  
RATIO  
1/3/4  
2/4  
5
MENU  
EXIT  
1
PLAY  
REW  
PAUSE STOP RECORD  
1/3/4  
FF  
SKIP  
P A G E 2 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Video Menu Options  
Adjust the picture appearance to suit your preference and  
viewing situations.  
EZ Picture  
Contrast  
Brightness  
Color  
G
Off  
SETUP  
VIDEO  
AUDIO  
TIME  
Daylight  
Normal  
Night Time  
Movie  
Sharpness  
Tint  
Video Game  
Sports  
Color Temperature  
SPECIAL  
LOCK  
Prev.  
MENU  
You can manually adjust the levels for the picture quality settings, such  
as Contrast, Brightness, Color, etc.  
You can also select a preset value from the EZ Picture menu based on the  
category of the program.  
Press the MENU button on the remote con-  
trol, then use the UP/DOWN arrow button to  
select the Video menu.  
VCR CABLE DVD  
TV  
SAT  
1
MODE  
LIGHT  
POWER  
TV/VIDEO  
COMP1  
FRONT  
COMP2  
DVI  
Press ENTER or the RIGHT arrow button to  
access the Video menu.  
2
RGB  
1
4
7
2
5
8
0
3
6
9
Use the UP/DOWN arrows to select one of the  
following options: EZ Picture (Off, Daylight,  
3
Normal, Night Time, Movie, Video Game, or  
Sports), Contrast, Brightness, Color,  
Sharpness, Tint, Color Temperature (Warm,  
Medium, Cool), and XD. Then press ENTER or  
the Right arrow button.  
FLASHBK  
ENTER  
2/3/5  
MUTE  
SURF  
SAP  
VIDEO  
VOL  
CH  
Use the LEFT/RIGHT arrows to adjust the  
option to your preference (Contrast,  
PIP  
PIPCH- PIPCH+ SWAP  
4
Brightness, Color, Sharpness, Tint).  
Use the UP/DOWN arrows to set the option to  
your preference (EZ Picture, Color  
Temperature, XD).  
CC  
FREEZE  
PIP INPUT  
RATIO  
1/3/4  
4
Press EXIT to save and return to TV viewing  
or press the ENTER button to save and return  
to the previous menu.  
2/3/4  
5
5
MENU  
EXIT  
1
PLAY  
REW  
PAUSE STOP RECORD  
1/3/4  
FF  
SKIP  
P A G E 2 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Video Menu Options  
SETUP  
VIDEO  
AUDIO  
TIME  
Contrast  
F
90  
G
E
SPECIAL  
LOCK  
• EZ Picture Lets you choose a preset value for the picture settings.  
Off Lets you adjust the picture manually to your preferences.  
Daylight Increases the levels of all picture settings to fit daylight conditions.  
Normal Restores the picture levels to their original settings.  
Night Time Increases the levels of all picture settings to fit daylight conditions.  
Movie Adjusts Video settings to enhance Movie viewing. Contrast and Sharpness levels are lowered so that the  
picture looks warm and soft.  
Video Game Sets the picture settings to the levels that are more suitable to enjoy games. Color, Contrast, and  
Sharpness levels are lowered to reduce the amount of glare.  
Sports Sets the picture settings to the levels that are more suitable to view sporting events. Contrast and  
Color levels are raised so that an action scene appears clear and brilliant.  
• Contrast Adjusts the difference between the light and dark levels of the picture. Press the right arrow button  
to activate adjusting.  
• Brightness Adjusts the white or light level of the overall picture.  
• Color Adjusts the intensity of all colors.  
• Sharpness Adjusts the level of crispness in the edges between the light and dark areas of the picture. The  
lower the level, the softer the image.  
• Tint Adjusts the balance between the red and green levels.  
• Color Temperature Adjusts levels of all colors in the TV picture: Warm, Medium, or Cool.  
•
LG electronic’s unique picture improving technology to display a real HD source through an advanced  
digital signal processing algorithm.  
P A G E 3 0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Audio Menu Options  
Adjust the sound to suit your taste and room situations.  
Off  
On  
EZ SoundRite  
EZ Sound  
G
SETUP  
VIDEO Balance  
Treble  
AUDIO  
Bass  
Front Surround  
TV Speaker  
TIME  
SPECIAL  
LOCK  
MENU Prev.  
Press the MENU button on the remote  
control, then use the UP/DOWN arrow  
button to select the Audio menu.  
1
VCR CABLE DVD  
TV  
SAT  
MODE  
LIGHT  
POWER  
TV/VIDEO  
COMP1  
FRONT  
COMP2  
DVI  
Press ENTER or the RIGHT arrow button  
to access the Audio menu.  
2
RGB  
Use the UP/DOWN arrows to select one  
of the following options: EZ SoundRite,  
EZ Sound, Balance, Treble, Bass, Front  
Surround, or TV Speaker. Then press  
ENTER or the RIGHT arrow button.  
1
4
7
2
5
8
0
3
6
9
3
FLASHBK  
ENTER  
2/3/5  
MUTE  
SURF  
Use the LEFT/RIGHT arrows to adjust the  
option to your preference (Balance,  
Treble, Bass).  
4
SAP  
VIDEO  
VOL  
CH  
PIP  
PIPCH- PIPCH+ SWAP  
Use the UP/DOWN arrows to select the  
option (EZ SoundRite, EZ Sound, Front  
Surround, or TV Speaker).  
CC  
FREEZE  
PIP INPUT  
RATIO  
1/3/4  
2/3/4  
5
Press EXIT to save and return to TV  
viewing or press the ENTER button to  
save and return to the previous menu.  
5
4
1
MENU  
EXIT  
PLAY  
REW  
PAUSE STOP RECORD  
1/3/4  
FF  
SKIP  
P A G E 3 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Audio Menu Options  
SETUP  
VIDEO  
AUDIO  
TIME  
E
Bass  
50  
F
G
SPECIAL  
LOCK  
• EZ SoundRite Scans for changes in the sound level during commercials, then adjusts the sound to match  
the current audio level of the TV program you are watching.  
• EZ Sound Chooses the sound options manually.  
Off Lets you adjust the Audio menu sound options manually.  
Normal Restores the sound levels to their original settings.  
Stadium Stresses high frequency sounds and front surround sound to create the sensation you would  
experience in a stadium.  
News Increases high frequency sounds to emphasize the human voice.  
Music Increases both high and low frequency sounds to stress the sounds of musical instruments.  
Theater Stresses both high and low frequency sounds, in addition to the front surround sound, to create  
the sensation you would experience in a theater.  
• Balance Adjusts the left to right balance of the TV speakers.  
• Treble Increases or decreases the higher frequency sounds from the TV speakers. Increases in treble, for  
example, make voice or string sounds stand out.  
• Bass Increases or decreases the lower frequency sounds from the TV speakers.  
• Front Surround Increases the front surround sound to create more open and expanded sound.  
• TV Speaker Allows you to toggle the TV internal speakers On, Center, or Off. If you want to use your exter-  
nal hi-fi stereo system, turn off the internal TV speakers. However, you may use the internal TV speakers as  
a center speaker to create a surround effect.  
P A G E 3 2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto Clock Setup  
Sets the time automatically from the PBS broadcast sig-  
nal.  
Auto Clock  
Manual Clock  
Off Timer  
G
PBS Ch.  
TV2  
SETUP  
VIDEO  
AUDIO  
Time Zone  
Auto  
The PBS channel signal includes information for the cor-  
rect time.  
Daylight Saving Off  
Auto Clock Off  
On Timer  
Sleep Timer  
Auto Off  
TIME  
SPECIAL  
LOCK  
MENU Prev.  
Press the MENU button on the remote  
control, then use the UP/DOWN arrow  
button to select the Time menu.  
1
VCR CABLE DVD  
TV  
SAT  
Press ENTER or the RIGHT arrow button  
to activate the Time menu.  
MODE  
LIGHT  
POWER  
2
TV/VIDEO  
COMP1  
FRONT  
COMP2  
DVI  
Use the UP/DOWN arrow button to  
choose Auto Clock, then press ENTER or  
RGB  
3
the RIGHT arrow button to activate the  
Auto Clock option.Use the LEFT/RIGHT  
arrow button to make your auto clock  
selection.  
1
4
7
2
5
8
0
3
6
9
FLASHBK  
ENTER  
• Use the UP/DOWN arrow button to set  
the PBS channel.  
2/3/4  
MUTE  
SURF  
SAP  
VIDEO  
• Time Zone - Lets you select the time  
VOL  
CH  
zone for your viewing area.  
PIP  
PIPCH- PIPCH+ SWAP  
• Daylight Savings - Lets you set  
Daylight Savings Auto, On or Off,  
depending on whether or not your  
viewing area observes Daylight  
Savings.  
CC  
FREEZE  
PIP INPUT  
RATIO  
1/3  
3
1
2/3  
4
MENU  
EXIT  
• Auto Clock - If you select Auto Clock,  
use the UP/DOWN arrow button to  
choose On or Off.  
PLAY  
REW  
PAUSE STOP RECORD  
1/3  
FF  
Press EXIT to save and return to TV  
viewing or press the ENTER button to  
save and return to the previous menu.  
4
SKIP  
P A G E 3 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Manual Clock Setup  
Auto Clock  
Manual Clock  
Off Timer  
SETUP  
VIDEO  
AUDIO  
TIME  
G
Year 2 0 0 4  
Date 01  
Time AM 10 : 44  
/
10  
On Timer  
Sleep Timer  
Auto Off  
SPECIAL  
LOCK  
MENU  
Prev.  
Press the MENU button on the remote  
control, then use the UP/DOWN arrow  
button to select the Time menu.  
1
VCR CABLE DVD  
TV  
SAT  
MODE  
LIGHT  
POWER  
Press ENTER or the RIGHT arrow button  
to activate the Time menu.  
TV/VIDEO  
COMP1  
FRONT  
COMP2  
DVI  
2
3
RGB  
Use the UP/DOWN arrow button to  
choose Manual Clock, then press the  
RIGHT arrow to activate the Manual  
Clock menu.  
1
4
7
2
5
8
0
3
6
9
FLASHBK  
ENTER  
Use the LEFT/RIGHT arrow button to  
make your Manual Clock selection. Your  
choices are: Year, Date and Time.  
2/6  
MUTE  
SURF  
4
SAP  
VIDEO  
VOL  
CH  
Use the UP/DOWN arrow to set the Year,  
Date, and Time.  
PIP  
PIPCH- PIPCH+ SWAP  
5
6
CC  
FREEZE  
PIP INPUT  
RATIO  
Press EXIT to save and return to TV  
viewing or press the ENTER button to  
save and return to the previous menu.  
1/3/5  
2/3/4  
4
MENU  
EXIT  
1
6
PLAY  
REW  
PAUSE STOP RECORD  
1/3/5  
FF  
SKIP  
P A G E 3 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV Turn Off Timer Setup  
Lets you set an automatic daily turn off time for your TV.  
Auto Clock  
Manual Clock  
Off Timer  
SETUP  
VIDEO  
AUDIO  
TIME  
Off Timer function overrides On Timer function if they are  
both set to the same time.  
Off  
On  
On Timer  
AM 12 : 00  
Sleep Timer  
Auto Off  
SPECIAL  
LOCK  
MENU  
Prev.  
Press the MENU button on the remote  
control, then use the UP/DOWN arrow  
button to select the Time menu.  
1
Press ENTER or the RIGHT arrow button  
to activate the Time menu.  
2
VCR CABLE DVD  
TV  
SAT  
MODE  
LIGHT  
POWER  
Use the UP/DOWN arrow to choose Off  
Time then press the RIGHT arrow to acti-  
vate Off Timer.  
3
TV/VIDEO  
COMP1  
FRONT  
COMP2  
DVI  
RGB  
Use the UP/DOWN arrow to choose On.  
1
4
7
2
5
8
0
3
6
9
4
Use the RIGHT arrow to select each Off  
Timer option.  
5
FLASHBK  
ENTER  
2/7  
Use the UP/DOWN arrow to set the hours  
and then set the minutes.  
MUTE  
SURF  
6
SAP  
VIDEO  
VOL  
CH  
Press EXIT to save and return to TV view-  
ing, or press the ENTER button to save  
7
PIP  
PIPCH- PIPCH+ SWAP  
and return to the previous menu.  
CC  
FREEZE  
PIP INPUT  
RATIO  
1/3/4/6  
2/3/5  
To cancel Off Timer function, use the  
UP/DOWN arrow button to select Off in  
step 4.  
5
1
MENU  
EXIT  
7
PLAY  
REW  
PAUSE STOP RECORD  
1/3/4/6  
FF  
SKIP  
P A G E 3 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV Turn On Time Setup  
Time function operates only if current time is set.  
Auto Clock  
Manual Clock  
Off Timer  
SETUP  
VIDEO  
AUDIO  
TIME  
Unless a button is pressed within two hours after the TV  
is turned on by the On timer function, the TV will auto-  
matically turn itself off.  
Off  
On  
On Timer  
G
Sleep Timer  
Auto Off  
Tim AM 04 : 00  
Ch. TV 1 4  
SPECIAL  
LOCK  
Vol.  
20  
MENU  
Prev.  
Press the MENU button on the remote  
control, then use the UP/DOWN arrow  
button to select the Time menu.  
1
Press ENTER or the RIGHT arrow to acti-  
vate the Time menu.  
2
VCR CABLE DVD  
TV  
SAT  
MODE  
LIGHT  
POWER  
Use the UP/DOWN arrow to choose On  
3
Time, then press the RIGHT arrow to  
activate the On Timer menu.  
TV/VIDEO  
COMP1  
FRONT  
COMP2  
DVI  
RGB  
Use the UP/DOWN arrow to choose On.  
4
1
4
7
2
5
8
0
3
6
9
Use the RIGHT arrow to select in turn  
the On Timer menu options: Time,  
Channel, and Volume.  
5
FLASHBK  
ENTER  
2/7  
Use the UP/DOWN arrow to set Time,  
Channel, and Volume at turn on.  
MUTE  
SURF  
6
SAP  
VIDEO  
VOL  
CH  
Press EXIT to save and return to TV view-  
ing, or press the ENTER button to save  
7
PIP  
PIPCH- PIPCH+ SWAP  
and return to the previous menu.  
CC  
FREEZE  
PIP INPUT  
RATIO  
1/3/4/6  
2/3/5  
To cancel On Timer function, use the  
UP/DOWN arrow button to select Off in  
step 4.  
5
1
MENU  
EXIT  
7
PLAY  
REW  
PAUSE STOP RECORD  
1/3/4/6  
FF  
SKIP  
P A G E 3 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sleep Timer Setup  
Select a preset time to turn your TV off automatically.  
Off  
Auto Clock  
Manual Clock  
Off Timer  
SETUP  
VIDEO  
AUDIO  
TIME  
10 min  
20 min  
30 min  
60 min  
90 min  
120 min  
180 min  
240 min  
On Timer  
Sleep Timer  
Auto Off  
G
SPECIAL  
LOCK  
MENU Prev.  
Press the MENU button on the remote  
control, then use the UP/DOWN arrow  
button to select the Time menu.  
1
VCR CABLE DVD  
TV  
SAT  
Press ENTER or the RIGHT arrow button  
to activate the Time menu.  
MODE  
LIGHT  
POWER  
2
TV/VIDEO  
COMP1  
FRONT  
COMP2  
DVI  
Use the UP/DOWN arrow to choose Sleep  
Timer then press the RIGHT arrow to  
access the Sleep Timer menu.  
RGB  
3
1
4
7
2
5
8
0
3
6
9
Use the UP/DOWN arrow to choose a pre-  
set turn off time.  
4
FLASHBK  
ENTER  
2/5  
Press EXIT to save and return to TV view-  
ing, or press the ENTER button to save  
and return to the previous menu.  
5
MUTE  
SURF  
SAP  
VIDEO  
VOL  
CH  
PIP  
PIPCH- PIPCH+ SWAP  
CC  
FREEZE  
PIP INPUT  
RATIO  
1/3/4  
If you turn the TV off after setting  
sleep timer, the setting will be  
erased. Set it again if necessary.  
2/3  
5
MENU  
EXIT  
1
PLAY  
REW  
PAUSE STOP RECORD  
1/3/4  
FF  
SKIP  
P A G E 3 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto Off  
If there is no input signal, the TV can be set up to switch  
to standby mode automatically after 10 minutes.  
Auto Clock  
Manual Clock  
Off Timer  
SETUP  
VIDEO  
AUDIO  
TIME  
On Timer  
Sleep Timer  
Auto Off  
Off  
On  
G
SPECIAL  
LOCK  
MENU Prev.  
Press the MENU button on the remote  
control, then use the UP/DOWN arrow  
button to select the Time menu.  
1
VCR CABLE DVD  
TV  
SAT  
Press the RIGHT arrow button to activate  
the Time menu.  
MODE  
LIGHT  
POWER  
2
TV/VIDEO  
COMP1  
FRONT  
COMP2  
DVI  
Use the UP/DOWN arrow button to  
choose Auto Off then press the RIGHT  
arrow button to access the Auto Off  
menu.  
RGB  
3
1
4
7
2
5
8
0
3
6
9
Use the UP/DOWN arrow to choose On or  
Off.  
4
FLASHBK  
ENTER  
2/5  
MUTE  
SURF  
Press EXIT button to save and return to  
TV viewing, or press the MENU button to  
save and return to the previous menu.  
5
SAP  
VIDEO  
VOL  
CH  
PIP  
PIPCH- PIPCH+ SWAP  
CC  
FREEZE  
PIP INPUT  
RATIO  
1/3/4  
2/3  
5
MENU  
EXIT  
1
PLAY  
REW  
PAUSE STOP RECORD  
1/3/4  
FF  
SKIP  
P A G E 3 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Aspect Ratio  
Press the MENU button on the remote control,  
1
Aspect Ratio  
Language  
Captions  
Caption/Text  
Key Lock  
Cinema  
G
4:3  
then use the UP/DOWN arrow button to select  
the Special menu. Or press RATIO button to  
instantly access the Aspect Ratio .  
SETUP  
VIDEO  
AUDIO  
TIME  
16:9  
Horizon  
Zoom1  
Zoom2  
Press ENTER or the RIGHT arrow button to acti-  
vate the Special menu.  
2
Use the UP/DOWN arrows to choose Aspect  
Ratio.  
3
4
Demo  
SPECIAL  
LOCK  
Press ENTER or the RIGHT arrow button to move  
into the Aspect Ratio selection menu. Use the  
UP/DOWN arrow buttons to select the right ratio  
for your viewing environment:  
MENU  
Prev.  
Lets you choose the way that an analog picture with a 4:3 aspect  
ratio is displayed on your TV 16:9 aspect ratio TV screen. When  
you receive an analog picture with a 4:3 aspect ratio on your  
16:9 TV, you need to specify how the picture is to be displayed  
according to your preference.  
• 4:3 - Choose when you want to view a pic-  
ture with an original 4:3 aspect ratio, with  
black bars appearing at both the left and  
right sides.  
• 16:9 - Choose when you want to adjust the  
picture horizontally, in a linear proportion to  
fill the entire screen. (Useful for viewing 4:3  
formatted DVDs.)  
VCR CABLE DVD  
TV  
SAT  
• Horizon - Choose when you want to adjust  
the picture in a non-linear proportion. The  
picture is more enlarged at both sides, to  
create a spectacular view.  
MODE  
LIGHT  
POWER  
TV/VIDEO  
COMP1  
FRONT  
COMP2  
DVI  
RGB  
• Zoom1 - Choose when you want to view the  
picture without any alteration. However, the  
top and bottom portions of the picture will  
be cropped.  
1
4
7
2
5
8
0
3
6
9
• Zoom2 - Choose when you want the picture  
to be altered, both vertically extended and  
vertically cropped. The picture taking a  
halfway trade off between alteration and  
screen coverage.  
FLASHBK  
ENTER  
2/4/5  
MUTE  
SURF  
SAP  
VIDEO  
VOL  
CH  
PIP  
PIPCH- PIPCH+ SWAP  
Press EXIT to save and return to TV viewing or  
press the ENTER button to save and return to  
the previous menu.  
5
CC  
FREEZE  
PIP INPUT  
RATIO  
1
1
1/3/4  
For RGB-PC source, you can select either 4:3 or  
16:9 aspect ratios.  
For RGB-DTV (720p, 1080i) or Component 1-2  
(720p, 1080i) sources,, you can select either  
4:3, 16:9 or Zoom1-2 aspect ratios.  
2/4  
5
MENU  
EXIT  
PLAY  
REW  
PAUSE STOP RECORD  
1/3/4  
Aspect ratio is changed to 16:9 automatically for  
720p or 1080i formats from component  
input1/2, RGB, or DVI sources.  
FF  
SKIP  
After connecting external equipment to the TV,  
don’t display a still picture for a long time on  
the screen. Doing so may damage the TV screen.  
P A G E 3 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
On-Screen Menu Languages  
Select your preferred language for the menus: English,  
Spanish, or French.  
Aspect Ratio  
Language  
Captions  
Caption/Text  
Key Lock  
Cinema  
SETUP  
VIDEO  
AUDIO  
TIME  
English  
Español  
Français  
G
Demo  
SPECIAL  
LOCK  
MENU Prev.  
Press the MENU button on the remote  
control, then use the UP/DOWN arrow  
button to select the Special menu.  
1
VCR CABLE DVD  
TV  
SAT  
Press ENTER or the RIGHT arrow button  
to activate the Special menu.  
MODE  
LIGHT  
POWER  
2
3
4
TV/VIDEO  
COMP1  
FRONT  
COMP2  
DVI  
Use the UP/DOWN arrow to choose  
Language.  
RGB  
1
4
2
5
8
0
3
6
Press ENTER or the RIGHT arrow button  
to move into the Language selection  
menu. Use the UP/DOWN arrow button to  
select the language you wish to use for  
your on-screen menus.  
7
9
FLASHBK  
ENTER  
2/4/5  
MUTE  
SURF  
Press EXIT to save and return to TV  
viewing or press the ENTER button to  
save and return to the previous menu.  
SAP  
VIDEO  
5
VOL  
CH  
PIP  
PIPCH- PIPCH+ SWAP  
CC  
FREEZE  
PIP INPUT  
RATIO  
1/3/4  
2/4  
5
MENU  
EXIT  
1
PLAY  
REW  
PAUSE STOP RECORD  
1/3/4  
FF  
SKIP  
P A G E 4 0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Captions Setup  
Aspect Ratio  
Language  
Captions  
Caption/Text  
Key Lock  
Cinema  
SETUP  
VIDEO  
AUDIO  
Off  
G
EZ Mute  
On  
TIME  
Demo  
SPECIAL  
Using the menu  
LOCK  
MENU Prev.  
Press the MENU button on the remote  
control, then use the UP/DOWN arrow  
button to select the Special menu.  
1
Press ENTER or the RIGHT arrow button  
to activate the Special menu.  
2
3
Use the UP/DOWN arrow to choose  
Captions, then press ENTER or the Right  
arrow button.  
VCR CABLE DVD  
TV  
SAT  
MODE  
LIGHT  
POWER  
Use the UP/DOWN arrow to make your  
caption selection. Your choices are: Off,  
EZ Mute, and On.  
TV/VIDEO  
COMP1  
FRONT  
COMP2  
DVI  
4
5
RGB  
Press EXIT to save and return to TV  
viewing or press the ENTER button to  
save and return to the previous menu.  
1
4
7
2
5
8
0
3
6
9
FLASHBK  
ENTER  
2/3/5  
MUTE  
SURF  
Using the CC button  
SAP  
VIDEO  
VOL  
CH  
PIP  
PIPCH- PIPCH+ SWAP  
Use the CC button on the remote control  
to select captions.  
1
2
CC  
FREEZE  
PIP INPUT  
RATIO  
Each press of the CC button changes the  
caption option; Off, EZ Mute, and On.  
Captions Setup is complete.  
EZ Mute shows the selected captions  
option (if available on program) when  
the TV sound is muted.  
1/3/4  
2/3  
5
MENU  
EXIT  
1
PLAY  
REW  
PAUSE STOP RECORD  
1/3/4  
Press EXIT to save and return to TV  
viewing.  
FF  
SKIP  
P A G E 4 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Caption/Text Mode Selection  
Select a closed caption mode for displaying captioning  
information when provided on the program.  
Aspect Ratio  
Language  
Captions  
Caption/Text  
Key Lock  
Cinema  
SETUP  
VIDEO  
AUDIO  
TIME  
CC 1  
Captions displays information at any position on the  
screen usually the program's dialog.  
CC 2  
CC 3  
G
Text displays information, usually at the bottom position  
and is used for a data service, generally not program  
related.  
CC 4  
Text 1  
Text 2  
Text 3  
Text 4  
Demo  
SPECIAL  
LOCK  
MENU Prev.  
VCR CABLE DVD  
TV  
SAT  
Press the MENU button on the remote  
1
control, then use the UP/DOWN arrow  
button to select the Special menu.  
MODE  
LIGHT  
POWER  
TV/VIDEO  
COMP1  
FRONT  
COMP2  
DVI  
Press ENTER or the RIGHT arrow button  
to activate the Special menu.  
RGB  
2
1
4
7
2
5
8
0
3
6
9
Use the UP/DOWN arrow to choose  
Caption/Text, then press ENTER or the  
Right arrow button.  
3
FLASHBK  
ENTER  
Use the UP/DOWN arrow to make your  
caption selection. Your options are: CC 1,  
CC 2, CC 3, CC 4, Text 1, Text 2, Text 3, and  
Text 4.  
2/3/5  
MUTE  
SURF  
4
SAP  
VIDEO  
VOL  
CH  
PIP  
PIPCH- PIPCH+ SWAP  
Press EXIT to save and return to TV  
viewing or press the ENTER button to  
save and return to the previous menu.  
5
CC  
FREEZE  
PIP INPUT  
RATIO  
1/3/4  
2/3  
5
MENU  
EXIT  
1
PLAY  
REW  
PAUSE STOP RECORD  
1/3/4  
FF  
SKIP  
P A G E 4 2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Key Lock  
The TV can be set up so that it can only be used with the  
remote control.  
Aspect Ratio  
Language  
Captions  
Caption/Text  
Key Lock  
Cinema  
SETUP  
VIDEO  
AUDIO  
TIME  
The feature can be used to prevent unauthorized viewing  
by disabling the front panel controls.  
The TV is programmed to remember which option it was  
last set to even if you turn the TV off.  
Off  
On  
G
Demo  
SPECIAL  
LOCK  
MENU Prev.  
VCR CABLE DVD  
TV  
SAT  
Press the MENU button on the remote  
1
control, then use the UP/DOWN arrow  
button to select the Special menu.  
MODE  
LIGHT  
POWER  
TV/VIDEO  
COMP1  
FRONT  
COMP2  
DVI  
Press ENTER or the RIGHT arrow button  
to activate the Special menu.  
RGB  
2
1
4
7
2
5
8
0
3
6
9
Use the UP/DOWN arrow to choose Key  
Lock, then press ENTER or the Right  
arrow button.  
3
FLASHBK  
ENTER  
2/3/5  
Use the UP/DOWN arrow to choose On  
or Off.  
MUTE  
SURF  
4
SAP  
VIDEO  
VOL  
CH  
Press EXIT to save and return to TV  
5
viewing or press the ENTER button to  
save and return to the previous menu.  
PIP  
PIPCH- PIPCH+ SWAP  
CC  
FREEZE  
PIP INPUT  
RATIO  
1/3/4  
2/3  
5
MENU  
EXIT  
1
PLAY  
REW  
PAUSE STOP RECORD  
1/3/4  
FF  
SKIP  
P A G E 4 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cinema Mode Setup  
Set up the TV for the best picture appearance for viewing  
movies.  
Aspect Ratio  
Language  
Captions  
Caption/Text  
Key Lock  
Cinema  
SETUP  
VIDEO  
AUDIO  
TIME  
When you operate Cinema (3:2 Pull-Down Mode or Cinema  
Correction Mode), the TV will adjust 24 fps video from  
movies to 30 fps video for display (This function is only  
available in Component 480i mode.)  
Off  
On  
G
Demo  
SPECIAL  
LOCK  
G
Prev.  
MENU  
Press the MENU button on the remote  
control, then use the UP/DOWN arrow  
button to select the Special menu.  
1
VCR CABLE DVD  
TV  
SAT  
MODE  
LIGHT  
POWER  
Press ENTER or the RIGHT arrow button  
to activate the Special menu.  
TV/VIDEO  
COMP1  
FRONT  
COMP2  
DVI  
2
RGB  
Use the UP/DOWN arrow to choose  
Cinema, then press ENTER or the Right  
arrow button.  
3
1
4
7
2
5
8
0
3
6
9
Use the UP/DOWN arrow to choose On or  
Off.  
4
FLASHBK  
ENTER  
2/3/5  
MUTE  
SURF  
Press EXIT to save and return to TV  
viewing or press the ENTER button to  
save and return to the previous menu.  
5
SAP  
VIDEO  
VOL  
CH  
PIP  
PIPCH- PIPCH+ SWAP  
CC  
FREEZE  
PIP INPUT  
RATIO  
1/3/4  
2/3  
5
MENU  
EXIT  
1
1/3/4  
PLAY  
REW  
PAUSE STOP RECORD  
FF  
SKIP  
P A G E 4 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Demo (Menu Review)  
EZ Demo Use to scan the features and  
menu options available on your TV.  
Aspect Ratio  
Language  
Captions  
Caption/Text  
Key Lock  
Cinema  
SETUP  
VIDEO  
AUDIO  
TIME  
XD Demo Use to see the difference  
between XD Demo On and XD Demo Off.  
EZ Demo  
Demo  
Demo  
G
SPECIAL  
LOCK  
Prev.  
MENU  
Press the MENU button on the remote  
control, then use the UP/DOWN arrow  
button to select the Special menu.  
VCR CABLE DVD  
TV  
SAT  
1
MODE  
LIGHT  
POWER  
TV/VIDEO  
COMP1  
FRONT  
COMP2  
DVI  
Press ENTER or the RIGHT arrow to acti-  
vate the Special menu.  
2
3
RGB  
1
4
7
2
5
8
0
3
6
9
Use the UP/DOWN arrow to choose Demo  
then press ENTER or the RIGHT arrow  
button to access the Demo menu.  
FLASHBK  
ENTER  
Use the UP/DOWN arrow to choose EZ  
Demo or XD Demo, then use the ENTER  
or the RIGHT button to start EZ Demo or  
XD Demo.  
2/3/4  
4
5
MUTE  
SURF  
SAP  
VIDEO  
VOL  
CH  
PIP  
PIPCH- PIPCH+ SWAP  
Press EXIT button to return to TV view-  
ing.  
CC  
FREEZE  
PIP INPUT  
RATIO  
1/3/4  
2/3/4  
5
MENU  
EXIT  
1
PLAY  
REW  
PAUSE STOP RECORD  
1/3/4  
FF  
SKIP  
P A G E 4 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parental Lock Setup  
Lock System  
Set Password  
Block Ch.  
Lets you set up blocking schemes to block specific chan-  
nels, ratings and external sources.  
SETUP  
VIDEO  
AUDIO  
A password is required to gain access to this menu if the  
Lock System is active.  
Movie Rating  
TV Rating- Children  
TV Rating-General  
Aux. Block  
Press the MENU button on the remote con-  
trol, then use the UP/DOWN arrow button  
to select the Lock Menu.  
1
TIME  
SPECIAL  
Press ENTER or the RIGHT arrow button to  
access the Lock Menu. The TV is set up  
with the initial password 0000.  
2
3
LOCK  
G
Use the UP/DOWN arrow to choose from the  
following Lock Menu options.  
• Lock System: Activates or disables the block-  
ing scheme you set up previously.  
• Set Password: Changes the password by key-  
ing in a new password twice.  
VCR CABLE DVD  
TV  
SAT  
• Movie Rating: Blocks movies according to  
the movie ratings limit, so children cannot  
view certain movies. You can set the ratings  
limit by blocking out all the movies with the  
ratings above a specified level. Keep in mind  
that the movie ratings limit only applies to  
movie shown on TV, not TV programs, such as  
soap operas.  
MODE  
LIGHT  
POWER  
TV/VIDEO  
COMP1  
FRONT  
COMP2  
DVI  
RGB  
1
4
7
2
5
8
0
3
6
9
• TV Rating-Children: Keeps children from  
watching certain TV programs among only the  
programs intended for children, according to  
the ratings limit. This rating does not apply  
to other TV programs. Unless you block cer-  
tain TV programs intended for mature audi-  
ences in the TV Rating - General menu, your  
children may view those programs.  
FLASHBK  
ENTER  
2
MUTE  
SURF  
SAP  
VIDEO  
VOL  
CH  
PIP  
PIPCH- PIPCH+ SWAP  
CC  
FREEZE  
PIP INPUT  
RATIO  
• TV Rating-General: Blocks certain TV pro-  
grams that you and your family do not want  
to watch, based on the ratings.  
1/3  
2
• Block Ch.: Blocks any channels that you do  
not want to watch or that you do not want  
your children to watch.  
MENU  
EXIT  
1
1/3  
PLAY  
REW  
PAUSE STOP RECORD  
FF  
• Aux. Block: Enables you to select a source  
for blocking among the source devices you  
have hooked up.  
SKIP  
If you forget your password,  
enter the number, 7777 to release the  
lock mode.  
P A G E 4 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parental Lock (Ratings Overview)  
Parental Lock Rating Descriptions  
Lock System  
SETUP  
G
Unlocks for channel  
and rating.  
Set Password  
VIDEO  
AUDIO  
Block Ch.  
Movie Rating  
Off  
On  
TV Rating- Children  
TV Rating-General  
Aux. Block  
TIME  
SPECIAL  
LOCK  
MENU Prev.  
TV-Y7 (Children 7 Years & Older): Program is designed for children age 7 and above.  
TV-G (General Audience): Most parents would find this program suitable for all ages.  
TV-PG (Parental Guidance Suggested): Program contains material that parents may find unsuitable for younger children.  
TV-14 (Parents Strongly Cautioned): Program contains some material that many parents would find unsuitable for chil-  
dren under 14 years of age.  
TV-MA (Mature Audiences Only): Program is specifically designed to be viewed by adults and therefore may be unsuitable  
for children under 17.  
G (General Audiences): All ages can view.  
PG (Parental Guidance Suggested): Some program content may not be suitable for children.  
PG-13 (Parents strongly cautioned): Some program content may not be appropriate for children under 13.  
R (Restricted): Children under 17 requires parent or adult guardian be present.  
NC-17: No one 17 or younger should view.  
TV-Y (All Children): Program is determined to be appropriate for all children.  
X: Adult only.  
Blocking Off: Permits all programs.  
P A G E 4 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programming the Remote  
The remote control for your HD receiver is a  
multi-brand or universal remote control that can  
be programmed to operate most remote-control-  
lable devices of other manufacturers.  
Note: The remote control may not be able to con-  
trol all models of other brands.  
VCR CABLE DVD  
TV  
SAT  
MODE  
LIGHT  
POWER  
Test your remote control.  
2
4
3
1
To find out whether your remote control can  
operate the device without programming,  
turn on the device such as a the VCR and  
press the corresponding mode button (VCR)  
on the remote control while pointing at the  
device. Test the POWER and CH +/- buttons  
to see if the device responds properly. If  
not, the remote requires programming to  
operate the device.  
TV/VIDEO  
COMP1  
FRONT  
COMP2  
DVI  
RGB  
1
4
7
2
5
8
0
3
6
9
Turn on the device to be programmed. Then  
press the corresponding mode button on the  
remote control.  
2
3
FLASHBK  
ENTER  
MUTE  
SURF  
3
SAP  
VIDEO  
Press the POWER button and the MUTE but-  
ton simultaneously. Now the remote control  
is ready to program the code for the corre-  
sponding device.  
4
5
VOL  
CH  
PIP  
PIPCH- PIPCH+ SWAP  
There are two ways to find the right code for  
the device.  
4
CC  
FREEZE  
PIP INPUT  
RATIO  
A. If you press the CH +/- buttons repeat-  
edly, the codes will change one at a time.  
Press the POWER button after each code  
change. If the right code is found, the  
device will turn off.  
MENU  
EXIT  
B. Enter a code number using the number  
buttons on the remote. The right code num-  
bers for the corresponding component can  
be found on the following pages.  
Again, if the code is correct, the device will  
turn off.  
PLAY  
REW  
PAUSE STOP RECORD  
FF  
SKIP  
Press the EXIT button to store the program.  
5
6
Test the remote control functions to see if  
the device responds properly. If not, repeat  
from step 2.  
P A G E 4 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programming Codes: TVs  
TVs  
Brand  
Codes  
Brand  
Codes  
Brand  
Codes  
Brand  
Codes  
A MARK  
ADMIRAL  
AKAI  
AMPRO  
AMSTRAD  
ANAM  
112 143  
072 081 161  
006 146  
073 167  
052  
043 054 056  
080 104 108  
112 115 118  
121 131  
004 006 058  
112  
088  
002 003 004  
006  
058  
043  
002 003 004  
006 043 101  
103 143  
043  
004  
039 043 050  
051  
143  
043 054  
043 143  
004 006 101  
116 143  
043  
004 016 017  
043 044 055  
071 076 103  
107 111 114  
117 120 123  
125 127 128  
136 143  
004 116 143  
043  
062  
024 077 143  
004 005 006  
028 043 047  
048 050 051  
096 116 143  
151 153 154  
155  
007 057  
028 043  
043  
GOLDSTAR  
004 102 106  
110 112 113  
116 119 122  
127 137 143  
004 116  
004 006 009  
010 011 012  
023 041 075  
143 158 163  
166  
019 024 040  
056 130 132  
134  
043  
043  
043  
019 081  
034 056 080  
092 164  
003 004 006  
024 043 056  
059 060 063  
064 127 143  
164  
003 004 005  
006 038 059  
070 093 143  
160 164  
006 018 023  
025 027 116  
135 176  
004 143  
144 160 161  
165 167  
Sharp  
004 014 019  
022 028 029  
081 143 170  
175  
088  
072  
041 070 079  
085 126 139  
147 185  
003 004 028  
043 116  
112  
NIKEI  
ONKING  
ONWA  
OPTONICA  
PANASONIC  
HALL MARK  
HITACHI  
SIEMENS  
SIGNATURE  
SONY  
AOC  
PHILCO  
SOUNDESIGN  
INFINITY  
INKEL  
JBL  
164  
129  
164  
BLAUPUNKT  
CANDLE  
SPECTRICON  
SSS  
SUPRE MACY  
SYLVANIA  
004 043  
002  
JCPENNY  
004 006 008  
009 024 030  
065 101 143  
156 160  
013  
034 038 070  
083 145  
043  
006 070  
002 059  
143  
006 043 143  
154  
CAPEHART  
CETRONIC  
CITIZEN  
PHILIPS  
PIONEER  
003 004 006  
044 059 060  
063 064 116  
127 140 160  
164  
JENSEN  
JVC  
CLASSIC  
CONCERTO  
CONTEC  
TANDY  
TATUNG  
TECHNICS  
TECHWOOD  
TEKNIKA  
081  
KEC  
056 062  
034 080 084  
004  
002 003 004  
006 024 028  
031 043 072  
077 101 103  
143  
KENWOOD  
KLOSS  
KMC  
PORTLAND  
PROSCAN  
CORONADO  
CRAIG  
CROWN  
KTV  
PROTON  
004 058 116  
131 143 171  
173  
CURTIS MATHES  
LG  
255  
072  
072  
004  
LODGENET  
LOGIK  
LUXMAN  
LXI  
QUASAR  
RADIO SHACK  
034 056 092  
019 043 047  
116 127 143  
004 006 023  
024 056 065  
074 144 152  
156 160 161  
165  
007 019 043  
047  
186  
168 169  
004 006 058  
116  
004 050 089  
101 105 113  
116 127 133  
137 143 160  
007 020 021  
033 039 053  
057 082 166  
004 028 043  
048 116 143  
004 007 015  
028 030 057  
082 094 101  
116 143 160  
CXC  
DAEWOO  
TELEFUNKEN  
037 046 086  
087  
072  
007 015 052  
081 160 164  
166  
003 004 006  
022 059 060  
061 063 064  
127 143 160  
164  
006 077 164  
164  
004 007 072  
116  
RCA  
TELERENT  
TERA  
TMK  
172  
004 116  
007 015 030  
040 051 062  
101 138  
143  
008 009  
146  
174  
004 116  
004 008 009  
019 028 060  
061 063 064  
072 074 116  
143 164  
004 006  
004 116  
043  
MAGNAVOX  
TOSHIBA  
REALISTIC  
DAYTRON  
DYNASTY  
DYNATECH  
ELECTROHOME  
EMERSON  
TOTEVISION  
UNIVERSAL  
VIDEO CONCEPTS  
VIDIKRON  
VIDTECH  
ROCTEC  
RUNCO  
SAMPO  
MARANTZ  
MATSUI  
MEMOREX  
SAMSUNG  
WARDS  
METZ  
MGA  
088  
004 006 024  
028 042 049  
077 116  
088  
004 006 024  
028 040 042  
109 116 124  
146  
004 006 062  
101  
015 025  
006 007 016  
SANYO  
FISHER  
FUNAI  
FUTURETECH  
GE  
MINERVA  
MITSUBISHI  
YAMAHA  
YORK  
YUPITERU  
ZENITH  
SCOTT  
SEARS  
004 006 008  
009 034 056  
073 074 091  
116 130 144  
155 160 161  
165  
001 072 073  
095 103 157  
112  
MTC  
ZONDA  
NAD  
NEC  
P A G E 4 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programming Codes: VCRs  
VCRs  
Brand  
AIWA  
AKAI  
Codes  
034  
Brand  
Codes  
055 060 130  
150 152  
014 034 039  
043 047 048  
255  
Brand  
Codes  
Brands  
TOTEVISION  
UNITECH  
VECTOR RESEARCH  
VICTOR  
VIDEO CONCEPTS  
VIDEOSONIC  
WARDS  
Codes  
040 101  
040  
012  
048  
034 040 041  
062 063 107  
109 140 144  
145 147  
003 008 010  
014 031 033  
034 040 053  
054 101  
016 043 046  
124 125 146  
072  
031 033 103  
012 023 039  
043  
035 037 129  
028 031 033  
108  
003 040 135  
031 033 041  
005 007 010  
064 065 108  
110 111 112  
116 117 119  
108  
KENWOOD  
AMPRO  
ANAM  
AUDIO DYNAMICS  
LG  
LLOYD  
LXI  
REALISTIC  
012 034 046  
040  
034  
003 009 013  
014 017 034  
101 106  
003 013 017  
024 031 033  
034 040 053  
054 131  
012 034 039  
043  
001 034 048  
056 058 072  
080 101  
BROKSONIC  
CANON  
CAPEHART  
CRAIG  
CURTIS MATHES  
DAEWOO  
RICO  
058  
148  
014  
MAGIN  
MAGNAVOX  
040  
RUNCO  
SALORA  
SAMSUNG  
031 033 034  
041 067 068  
012 031 033  
067 069  
101  
027 030  
YAMAHA  
ZENITH  
032 040 102  
104 105 107  
109 112 113  
115 120 122  
125  
022 043 048  
135  
003 007 010  
014 102 134  
017 037 112  
129 131  
003 008 009  
010 013 014  
017 020 031  
042 073 081  
101  
MARANTZ  
MARTA  
MATSUI  
MEI  
DAYTRON  
DBX  
031 033  
SANSUI  
SANYO  
SCOTT  
012 023 039  
043  
034 053  
MEMOREX  
003 010 014  
031 033 034  
053 072 101  
102 134 139  
045 046 059  
013 020  
013 020 045  
046 049 051  
059 061 151  
034 040  
DYNATECH  
ELECTROHOME  
EMERSON  
059  
006 017 025  
027 029 031  
034 035 036  
037 046 101  
129 131 138  
153  
MGA  
MINOLTA  
MITSUBISHI  
SEARS  
MTC  
FISHER  
003 008 009  
010  
034  
031 033 063  
072 107 109  
144 147  
MULTITECH  
NEC  
024 034  
012 023 039  
043 048  
043  
053 054  
066 070 074  
083 133 140  
145  
013 020 031  
033 063  
SHARP  
SHINTOM  
SONY  
031 054 149  
024  
003 009 031  
052 056 057  
058 076 077  
078 149  
034  
013  
031 033 034  
059 067  
FUNAI  
GE  
NORDMENDE  
OPTONICA  
PANASONIC  
GO VIDEO  
GOLDSTAR  
132 136  
SOUNDESIGN  
STS  
SYLVANIA  
012 013 020  
101 106 114  
123  
PENTAX  
HARMAN KARDON  
HITACHI  
012 045  
PHILCO  
PHILIPS  
031 034 067  
031 033 034  
054 067 071  
101  
101  
013 021 048  
108  
072  
011 014  
033 066 075  
145  
013 020 033  
SYMPHONIC  
TANDY  
TATUNG  
TEAC  
TECHNICS  
TEKNIKA  
034  
010 034  
039 043  
034 039 043  
031 033 070  
019 031 033  
034 101  
034  
006  
004 018 026  
034 043 063  
137 150  
031 033  
031 033  
012 013 015  
033 040 066  
101  
043  
012 031 033  
043 048 050  
INSTANTREPLAY  
JCL  
JCPENNY  
PILOT  
PIONEER  
PORTLAND  
PULSAR  
QUARTZ  
QUASAR  
THOMAS  
TMK  
TOSHIBA  
JENSEN  
JVC  
008 013 042  
047 059 082  
112 131  
RCA  
P A G E 5 0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programming Codes: SAT/DVDs  
SAT  
Brand  
ALPHASTAR DSR  
AMPLICA  
BIRDVIEW  
BSR  
CAPETRONICS  
CHANNEL MASTER  
Codes  
123  
050  
051 126 129  
053  
Brand  
Codes  
027 133 134  
Brand  
Codes  
117  
071  
Brand  
Codes  
115  
128 146  
001 081 082  
083 084 091  
120  
PERSONAL CABLE  
PHILIPS  
PICO  
PRESIDENT  
PRIMESTAR  
PROSAT  
RCA  
REALISTIC  
SAMSUNG  
VIEWSTAR  
WINEGARD  
ZENITH  
GENERAL INSTRUMENT 003 004 016  
029 031 059  
101  
139 140  
033 037 039  
051 057 104  
068  
105  
019 102  
030 110 111  
072  
066 106  
043 074  
123  
053  
HITACHI  
HOUSTON TRACKER  
013 014 015  
018 036 055  
008 009 012  
077  
CHAPARRAL  
HUGHES  
HYTEK  
053  
CITOH  
CURTIS MATHES  
DRAKE  
054  
JANIEL  
JERROLD  
KATHREIN  
LEGEND  
LG  
LUTRON  
LUXOR  
MACOM  
060 147  
061  
108  
057  
255  
SATELLITE SERVICE CO 028 035 047  
057 085  
SCIENTIFIC ATLANTA 032 138  
050 145  
005 006 007  
010 011 052  
112 116 141  
024 046 056  
076  
038 040 057  
058 093 094  
095 096 097  
098 099 100  
122  
SONY  
103  
STARCAST  
SUPER GUIDE  
TEECOM  
041  
DX ANTENNA  
ECHOSTAR  
132  
020 124 125  
023 026 075  
087 088 090  
107 130 137  
002 127  
016 025 042  
043 044 045  
048 049 078  
079 080 086  
101 135 136  
062 144  
010 059 063  
064 065  
057  
028 124 125  
069 070  
MEMOREX  
NEXTWAVE  
NORSAT  
PACE SKY SATELLITE 143  
PANASONIC  
PANSAT  
TOSHIBA  
UNIDEN  
ELECTRO HOME  
EUROPLUS  
FUJITSU  
089  
114  
017 021 022  
060 142  
121  
DVD  
Brand  
APEX DIGITAL  
DENON  
GE  
GOLDSTAR  
HARMAN KARDON  
JVC  
LG  
Codes  
022  
020 014  
005 006  
010 016 025  
027  
Brand  
Codes  
025  
013  
024  
002  
023  
008 017  
003 009  
Brand  
Codes  
013  
004 026  
021  
005 006  
005 006  
011 015  
007  
Brand  
Codes  
PHILIPS  
PIONEER  
PROCEED  
PROSCAN  
RCA  
THOMPSON  
TOSHIBA  
YAMAHA  
ZENITH  
005 006  
019 008  
009 018  
010 016 025  
MAGNAVOX  
MARANTZ  
MITSUBISHI  
NAD  
ONKYO  
PANASONIC  
012  
001 010 016  
SAMSUNG  
SONY  
P A G E 5 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programming Codes: Cable Boxes  
CATV  
Brand  
ABC  
Codes  
Brand  
Codes  
Brand  
REGAL  
REGENCY  
REMBRANT  
RK  
Codes  
049 050  
057  
025  
091  
Brand  
Codes  
032 035  
012 015 018  
086 087 088  
089  
003 004 039  
042 046 052  
053  
014  
005 007 014  
024  
026  
092  
007  
007  
065 090  
080 081  
019 030  
023  
020 030 040  
057 062 066  
032  
072  
008 022 025  
054  
052 074  
030  
049 050 055  
052 055  
070 077  
002 003 004  
008 009 010  
052 069 074  
255  
037  
033  
010 012 064  
079  
001  
028 032  
015 028 038  
071 073  
016 031 037  
053  
044 047  
001  
006 012 013  
020 065 085  
090  
034 051 052  
063 076  
016  
VIEWSTAR  
LG  
ANTRONIK  
ARCHER  
M-NET  
MACOM  
MAGNAVOX  
SAMSUNG  
SCIENTIFIC ATLANTA 003 011 041  
030 068  
ZENITH  
001 060 093  
CABLE STAR  
CENTURION  
CENTURY  
CITIZEN  
COLOUR VOICE  
COMBANO  
COMTRONICS  
DIAMOND  
EAGLE  
042 043 045  
046  
022  
030  
052  
MEMOREX  
MOVIE TIME  
NSC  
SHERITECH  
SIGNAL  
SIGNATURE  
SL MARX  
SPRUCER  
STARCOM  
OAK  
030  
047 078  
002 004 008  
009  
008 030  
067  
PANASONIC  
PARAGON  
PHILIPS  
EASTERN  
ELECTRICORD  
GE  
STARGATE  
SYLVANIA  
TADIRAN  
TANDY  
TEXSCAN  
TOCOM  
TOSHIBA  
UNIKA  
UNITED CABLE  
UNIVERSAL  
030  
017  
GEMINI  
PIONEER  
029 067  
039 040 056  
001  
007 014 024  
004 053  
005 007 014  
024 026 027  
GI  
POST NEWS WEEK  
PRUCER  
PTS  
GOLDEN CHANNEL  
HAMLIN  
HITACHI  
HOSPITALITY  
JERROLD  
059  
011 048 071  
072 073 074  
001  
PULSAR  
RCA  
047  
P A G E 5 2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance  
Early malfunctions can be prevented. Please read pages 2-3-4 in the front of the manual and follow the recom-  
mendations provided. Careful and regular cleaning of your new TV can enhance its appearance and your viewing  
pleasure. Be sure to turn the power off and pull out the plug before you begin any cleaning.  
SCREEN CLEANING  
1. Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and  
a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the  
screen.  
2. Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.  
CABINET CLEANING  
1. Use a soft cloth with a mild soap solution to wipe the cabinet.  
2. Rinse the cloth and wipe the cabinet again.  
3. Let the cabinet air-dry before turning the TV on.  
WOOD CABINETS  
Use a quality wood cleaner and polish. This will protect the TV from dirt and dust, as well as keep the cabinet looking  
new.  
EXTENDED ABSENCE  
If you intend to leave your TV dormant for a long time (such as a vacation), it’s a good idea to unplug the power cord  
to protect against possible damage from lightning or power surges. If you use an off-air antenna, you may also want to  
disconnect it from the back of your TV before leaving.  
PICTURE INTERFERENCE  
Even though you may be getting cable service, the signal may be weak, which means the quality  
of your picture may suffer due to other factors. If there are problems with the image on your TV, consult the  
Troubleshooting guide on the following pages. You may also want to contact your cable service provider to deter-  
mine if the problem is from the cable service.  
VIDEO GAMES AND OTHER FIXED-PATTERN DISPLAYS  
If you use your TV to play video games or for other uses that have single,  
fixed images, such as a photo-CD player, you should avoid setting the Brightness level too high.  
If static images, like network identification patterns, are left on the screen for too long, they can leave a perma-  
nent impression on the TV screen. You can reduce the chance of this happening by  
limiting the amount of time you use the fixed-image display, and by reducing the contrast and brightness levels.  
If you unplug your TV from a wall power outlet, you may have to reset the clock using the Time menu  
described earlier.  
P A G E 5 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Some quick and easy tips to fixing problems yourself.  
POSSIBLE SOLUTIONS  
SYMPTOMS  
• Check your antenna connection or location.  
• Check your cable input.  
Snowy picture and unclear sound.  
• Check to see if the TV/VCR button on your VCR has the TV selected.  
• Check your antenna direction and/or location.  
• Check your cable input.  
Multiple images or ‘ghost shadows.’  
• Make sure the cable from your antenna to your TV is  
properly connected.  
The following may cause image problems or distortion:  
Electrical appliances, powerful lights, cars, trucks; computers or  
portable phones; medical equipment  
Interference: Sharp lines across  
the screen and unclear sound.  
• If possible increase the distance between your TV and the offending appliance.  
Or shut one of them off.  
• Check sound level.  
• Make sure the TV sound is not muted.  
Normal picture but no sound.  
• Try another channel. The problem may be the broadcast, not your TV.  
• Are the Audio cables properly installed?  
• Are the wires for external speakers (if you have external speakers)  
properly installed?  
• Make sure your speakers are turned on in the Audio menu.  
• If your audio mode is set to SAP, that channel may not have an SAP program.  
• Are you in TV or cable tuning mode, and should be in the other?  
• Make sure output channels on all A/V equipment are on the same channel (3 or 4).  
• Check that all connections are tight.  
No picture and unclear sound.  
No picture and no sound.  
• Is the AC power cord plugged in?  
• Check that your AC power outlet works. (Test it by plugging in something  
else or try another outlet.)  
• Make sure your brightness and audio controls are set properly.  
• Try another channel. The problem may be with the broadcast.  
• Check the color settings in the Video menu.  
• Try another channel. The problem may be with the broadcast.  
No color, but the sound is O.K.  
• The Caption option may be in Text mode. Select Caption 1, or OFF  
in the Captions/Text menu.  
Picture has a big black box  
on it, but the sound is O.K.  
• Your program is in letterbox. This means that the shape of your TV is a  
square, but the program is a rectangle. Think of the bars as empty space the  
program doesn’t fill; not picture that’s blocked out. Because this format is a  
direct representation of film as you see it in the movies, you are actually seeing  
MORE of the program when you see those bars.  
Picture has two horizontal  
black bars, one on top and  
one on bottom.  
Missing Secret code  
• If you forget the secret code, press the remote control Button ‘7’, ‘7’, ‘7’ and ‘7’  
when the display asks you to enter the secret code.  
P A G E 5 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting (Contd.)  
Remote control doesn’t work.  
• Make sure the batteries are fresh and installed properly.  
Menu options can’t be  
• Try unplugging your TV for a few minutes,  
changed or selected.  
then plug it back in.  
No picture or sound  
when any non-cable source  
is selected.  
• Check to see if the source equipment has been turned on.  
• Make sure that the connections are secure on the back of your TV and on the  
source equipment.  
Weak or no Stereo Sound  
when using a stereo VCR.  
• Check to see if all the connections are secure.  
• Look in the Audio mode menu to see if all the settings are correct.  
• You are using channel 3 or 4 to view your VCR. No stereo sound is present  
under that decision.  
The PIP inset is black or  
lacks contrast.  
• Check to be sure that the PIP source is turned on.  
• You might want to adjust the PIP picture settings under the PIP menu.  
• Check that all the wires are connected properly.  
• Check to see if your input source for PIP is set correctly.  
The PIP inset is “snow” when  
• Look to see if the TV/VCR button on your VCR has the TV selected or change  
the source is Antenna.  
the PIP to another source.  
Time is incorrect.  
• Reset clock manually.  
P A G E 5 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary  
A list of definitions for some of the words found in this guide as they relate to these TVs.  
75 OHM RF CABLE  
The round cable that comes from an off-air antenna or cable service provider. Each end looks like a hex  
shaped nut with a wire sticking through the middle, and it screws onto the threaded jack on the back  
of your TV.  
A/V CABLES  
Audio/Video cables. Three cables - Right audio (red), Left audio (white), and Video (yellow). A/V  
cables are used for stereo playback of videocassettes and for higher quality picture and sound from  
other A/V devices.  
A/V DEVICE  
Any device that produces video or sound (VCR, DVD, cable box,satellite receiver, set-top box, or televi-  
sion).  
ADD (SHOW)  
This function lets you add new channels to the channel list in memory that you’ll scroll through when  
using your remote.  
AMPLIFIER  
ANALOG TV  
An external device that amplifies sound from a television, CD player, VCR, DVD or other A/V device.  
Traditional method of representing a television signal as a replica (analog) of the original picture and  
sound.  
ANTENNA  
The physical receiver of television signals sent over the air. A large metal piece of equipment does not  
always have to be visible for your home to be using an antenna.  
ASPECT RATIO  
The ratio of the horizontal dimension to the vertical dimension of a picture. Standard television in the  
U.S. today is generally transmitted and displayed in a 4:3 aspect ratio. High-Definition television will  
normally be formatted in the wider 16:9 aspect ratio.  
AUDIO CENTER MODE IN  
CAPTIONS  
Input jack provided for connecting external Dolby digital preamplifier output to the TV, to use as the  
center speaker channel and enhance your home theater setup.  
A form of subtitling that writes out the dialog of a program on the screen.  
COMPONENT INPUT ( YPbPr )  
Series of input jacks provided for extremely accurate picture reproduction yielding a higher  
quality picture than standard video inputs.  
DELETE (HIDE)  
DIGITAL TV  
Removes channels that you don’t watch from the channel list in memory.  
A new method of representing a television signal as a series of binary numbers ( 1's and 0's ). This  
method allows for the signal to be manipulated to eliminate redundancy to dramatically increase pic-  
ture and sound quality.  
DOLBY DIGITAL  
Dolby Digital Cinema Sound is made possible by a new digital coding technique called Dolby AC-3.  
Dolby AC-3 produces high-quality, 5.1 channel surround sound which is six discrete separate channels  
for a full range of sound. Each channel can carry a different signal simultaneously (front center, front  
left, front right, surround left, surround right and subwoofer).  
DVD  
Optical disc storage technology. Digital video disc player. A disc that contains movies etc. in digital  
format.  
DVI INPUT  
DTV  
Digital video interface. Video multimedia standard for computer text and graphics.  
Digital television source, (set-top box).  
DTV FORMATS  
Standard DTV format.  
Enhanced DTV format. (Progressive Scan).  
(HDTV) High definition video formats.  
480I  
480p  
720p/1080i  
P A G E 5 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary (Contd.)  
A list of definitions for some of the words found in this guide as they relate to these TVs.  
HD-STB  
INPUT  
High-definition set-top box.  
Refers to the jack that receives a signal into the TV, VCR or other  
A/V device.  
JACK  
A connection on the back of a TV, VCR, or any other A/V device. This includes the RF jacks and the  
Audio/Video jacks that are color-coded.  
MODE  
The mode determines the type of device (TV, VCR, Cable, Aux) that the remote is controlling; remote  
operating mode.  
MONO SOUND  
Mono (monaural) sound is one channel of sound. On more than one speaker, all the speakers play the  
same audio.  
OUTPUT  
Refers to the jack that sends a signal out of a VCR, DVD, or other A/V device.  
A computer.  
PC  
PIP  
This is the most common way to refer to the Picture-in-Picture (PIP) feature.  
PIP SNAPSHOT  
Press FREEZE button to capture and freeze sub picture in PIP or split mode. Press PIP button to enter  
PIP mode from another channel. Press EXIT button to remove PIP from the screen.  
POP (PICTURE-OUTSIDE-PICTURE)Additional PIP-type viewing feature.  
RGB INPUT  
Red, green, blue. 15-pin input provided for computers or set-top boxes.  
SECOND AUDIO  
Second Audio Programming (SAP) is another, separate, audio channel available with some program-  
ming. Choosing SAP often refers to listening to audio in another language, such as Spanish or French.  
PROGRAMMING/SAP  
SIGNAL  
Picture and sound traveling through cable, or on the air, to your television screen.  
SOURCE  
The term for the equipment that provides audio and video information to your TV. Antennas, VCRs, DVD  
players, and Cable Boxes are examples of sources.  
STEREO SOUND  
SURF  
Stereo (stereophonic) sound refers to audio that’s divided into right and left sides.  
This function creates a customized list of your favorite channels. You can access this group of channels  
with the surf button on the remote by pressing Surf repeatedly.  
S-VIDEO  
(Y-C) connection available for S-Video devices providing better picture quality than standard video  
inputs.  
TEXT  
Arbitrary text not related to the program.  
TUNER  
Any device that picks up broadcast signals and turns them into  
picture and sound.  
TWIN PICTURE  
XGA  
Feature that splits the screen and places two picture sources side-by-side.  
A high-resolution computer data format compatible with these TVs.  
P A G E 5 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Product Specifications  
Models  
RU-44SZ63D  
Horizontal Size (Inches)  
Height (Inches)  
Depth (Inches)  
41.7  
30.1  
14  
Weight (lbs.)  
69  
RU-52SZ53D  
Horizontal Size (Inches)  
Height (Inches)  
Depth (Inches)  
48.6  
35  
15.3  
85.5  
Weight (lbs.)  
Power Requirement  
Television System  
Television Channels  
AC 120V, 60Hz  
American TV Standard, NTSC, ATSC with STB  
VHF: 2 - 13  
UHF: 14 - 69  
CATV: 1 - 125  
Power Consumption (W)  
Antenna  
240W  
75 ohm External Terminal for VHF/UHF  
12W x 2  
Audio Output (W)  
External Input/Output Ports  
A/V input (3 set)  
A/V output (1 set)  
S-Video input (2)  
Component input (2 set)  
RGB input (1)  
DVI input (1)  
RGB/DVI audio input (1 set)  
Variable audio output (1 set)  
Audio center mode input (1)  
Calibration port (1)  
Design and specifications are subject to change without prior notice.  
P A G E 5 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONCERNING PIXEL FUNCTIONALITY: Your DLP Rear Projection Television contains about 921600 individual pixels.  
DLP Projection displays typically contain a small number of pixels that do not function normally. Your display has been  
inspected and is in compliance with manufacturer’s specifications, indicating that any pixel defects do not effect the  
operation or use of your display.  
READ YOUR OPERATING GUIDE CAREFULLY SO THAT YOU UNDERSTAND THE OPERATION OF YOUR DLP REAR PRO-  
JECTION DISPLAY AND HOW TO ADJUST THE CONSUMER CONTROLS.  
IMPORTANT: Please fill out and mail in your Product Registration Card or go to www.lgservice.com to register your  
product online. This information allows us to reach you promptly should we discover a safety or reliability problem that  
could affect you.  
CUSTOMER ASSISTANCE NUMBERS  
To obtain customer assistance, product information,  
or Dealer or Service locations  
Call 1-800-243-0000  
24 hours a day, 365 days per year  
FOR SERVICE:  
For warranty service information, please contact the LG®Brand Customer Support telephone number listed below.  
When calling for service, please have your product model number, serial number and the date of purchase or the date  
of original installation available.  
If a replacement unit is required, under some circumstances you may be asked to provide a reserve deposit to the  
LG®Brand Service Center against a credit card number as surety for advanced shipment. Your credit card will not be  
charged if you return the defective unit within 10 working days.  
If a replacement unit is received, please use the carton and packaging from that unit in returning the defective unit to  
the LG®Brand Service Center.  
Parts and service in accordance with the LG®Brand warranty is our responsibility and will be provided without charge.  
Other service requirements will be at the owner’s expense. If you have problems in obtaining satisfactory warranty ser-  
vice, write or call the LG®Brand Customer Interactive Service.  
To assure proper credit and avoid unnecessary charges, you must obtain a Return Authorization before returning any  
product to the Factory Service Center. Contact the number below or your authorized LG®Brand repair facility for  
details.  
Before you call for warranty service, check your operating guide – you may avoid a service call.  
LG®Brand Customer Interactive Center  
P. O. Box 240007  
201 James Record Road  
Huntsville, Alabama 35824  
ATTN: CIC  
Telephone number: 1-800-243-0000  
This number is a toll-free number  
Follow menu prompts when the call is answered  
Web address: www.lgservice.com  
Telephone Center Hours of Operation:  
24 hours a day, 365 days per year  
Service for your LG®Brand Rear Projection Television is provided through LG Electronics Alabama, Inc., the authorized  
LG®Brand Service Center for the United States.  
LG®Brand DLP Rear Projection Televisions are marketed and distributed in the United States by  
LG Electronics Corporation, 2000 Millbrook Drive, Lincolnshire, IL 60069.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LG® Brand  
DLP Rear Projection Television  
U.S. Limited Warranty  
Your LG® brand DLP Rear Projection Television will be repaired or replaced as set forth below, if it proves to be defec-  
tive in material or workmanship under normal use, during the warranty period ("Warranty Period") listed below, effec-  
tive from the date ("Date of Purchase") of original consumer purchase of the product. This warranty is good only to  
the original purchaser of the product and effective only when used in the United States, excluding U.S. Territories.  
WARRANTY PERIOD:  
In-Home Service is available on this Unit, as  
provided in this Warranty. Please retain dealer’s  
dated bill of sale or delivery ticket as evidence of  
the Date of Purchase for proof of warranty, and  
submit a copy of the bill of sale to the service per-  
son at the time warranty service is provided.  
LABOR: One Year from the Date of Purchase. Your unit will be repaired or  
replaced with a new, substitute model or factory reconditioned unit, at the  
manufacturer’s option. If repair, parts used in the repair may be new or  
remanufactured.  
Parts, except for Halogen Bulb: One Year from the Date of Purchase.  
Please call  
Halogen Bulb: 90 Days from the Date of Purchase.  
1-800-243-0000  
Replacement Units and Repair Parts are warranted for the remaining portion  
of the original unit’s warranty period.  
To locate your nearest LG® Brand  
Authorized Service Center and to schedule a  
service appointment.  
EFFECTIVE DATE OF WARRANTY: Your warranty period begins on the  
date of sale to the original consumer / end user. KEEP THE DEALER’S  
DATED BILL OF SALE OR PROOF OF DELIVERY as evidence of the purchase  
date. You will be required to submit a legible copy of your bill of sale or  
proof of delivery when requesting warranty service.  
For further Instructions, see "For Service" below  
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIM-  
ITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE  
EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS  
WARRANTY PERIOD ABOVE. NEITHER THE MANUFACTURER NOR ITS U.S. DISTRIBUTOR SHALL BE LIABLE  
FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY NATURE,  
INCLUDING WITHOUT LIMITATION, LOST PROFITS, LOST OR CORRUPTED PROGRAMMING OR DATA, OR  
ANY OTHER DAMAGE WHETHER BASED IN CONTRACT, TORT, OR OTHERWISE. Some states do not allow the  
exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so  
the above exclusion or limitation may not apply to you. This warranty gives you specific legal rights and you may also  
have other rights that vary from state to state.  
THIS LIMITED WARRANTY DOES NOT APPLY TO:  
G damage caused in shipping or transit  
G service required as a result of improper installation,  
including incorrect or insufficient AC supply (please  
consult the owner’s manual for power supply require-  
ments).  
G installation or repair of antenna systems, cable con-  
verters, cable company supplied equipment, or other  
components in a video system  
G set-up or adjustment on consumer controls, or dam-  
age caused by improper adjustments  
G damage caused by other system components  
G any unit that has been modified or incorporated into  
any other product  
G damage (including cosmetic damage), failure, loss or  
personal injury due to misuse, abuse, negligence,  
improper maintenance or storage, or to acts of nature  
or other causes beyond our control. (Causes beyond  
our control include but are not limited to lightning  
strike, power surges, power outages and water dam-  
age.)  
G repair or replacement of warranted parts by other  
than an LG® Brand authorized service centers.  
G units purchased or serviced outside of the U.S.A.  
G product where the original factory serial numbers  
have been removed, defaced or changed in any way.  
G product sold and labeled as "as is, where is" or simi-  
lar disclaimer.  
G replacement of batteries on the remote control.  
G replacement of the Halogen Bulb except within the  
first 90 days  
The cost of repair or replacement under these excluded circumstances shall be borne by the consumer.  
d
P/N : 3828VA0465L (MB042H)  
Download from Www.Somanuals.com. All Manuals Search And Download.  

LaCie DVD Player DVD121 User Manual
Land Pride Lawn Mower RCF45180 User Manual
Leviton Stereo Receiver 48213 VMA User Manual
Lexmark All in One Printer S505 User Manual
LG Electronics DVD Player LDA 731 User Manual
LG Electronics Recording Equipment IPLDK CRS User Manual
LG Electronics TV VCR Combo VX8575 User Manual
M Audio Musical Instrument M71020QS EN User Manual
Metra Electronics Car Stereo System 99 3410 User Manual
Micron Technology Pacemaker TX716A User Manual