OWNER’S MANUAL
M2394D
M2794D
Please read this manual carefully before operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote
this information to your dealer when you require
service.
Trade Mark of the DVB Digital Video
Broadcasting Project (1991 to 1996)
ID Number(s): 5743 : M2394D
5744 : M2794D
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARATION
BACK PANEL INFORMATION
I
This is a simplified representation of the back panel. The image shown may be somewhat different from your
set.
1
2
3
4
5
6
7
COMPONENT
IN
AV-IN 3
AUDIO IN
(RGB/DVI)
OPTICAL
DIGITAL
AUDIO OUT
Y
AV 1
AV 2
1
2
P
B
HDMI
RGB IN (PC)
P
R
DVI-D
ANTENNA
IN
L
SERVICE
ONLY
RS-232C IN
(CONTROL & SERVICE)
R
S-VIDEO
8
9
10
13
14
11
12
1
2
7
PCMCIA (Personal Computer Memory Card
International Association) Card Slot
(This feature is not available in all countries.)
Audio/Video Input
Connect audio/video output from an external device
to these jacks.
8
9
Power Cord Socket
SERVICE ONLY PORT
This set operates on AC power. The voltage is indicat-
ed on the Specifications page. Never attempt to
operate the set on DC power.
DVI-D Input
Connect the output from a PC.
10
11
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
3
HDMI Input
Connect a HDMI signal to HDMI IN.
Or DVI (VIDEO) signal to HDMI IN with DVI to HDMI
cable.
Component Input
Connect a component video/audio device to these
jacks.
4
5
RGB/DVI Audio Input
Connect the audio from a PC.
S-Video Input
Connect S-Video out from an S-VIDEO device.
12
13
Optical Digital Audio Out
Connect digital audio from various types of eguip-
ment
Euro Scart Socket (AV1/AV2)
Connect scart socket input or output from an exter-
nal device to these jacks.
6
RGB INPUT (PC)
Connect the output from a PC.
14
Antenna Input
Connect over-the-air signals to this jack.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARATION
STAND INSTALLATION
I
The image shown may be somewhat different from your set.
Carefully place the product screen side down on a
cushioned surface that will protect product and
1
screen from damage.
stand base
Insert the
into the product
2
Attach the monitor to the Stand Base by turning
the screw to the right.
3
* Turn the screw by using the screw handle
Screw
3
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARATION
DETACHING STAND
I
The image shown may be somewhat different from your set.
Place the set screen side down on a cushion or
soft cloth.
Detach the monitor to the Stand Base by turn-
ing the screw to the left.
1
2
Pull the stand base.
Turn the screw by using the screw handle
4
3
5
4
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARATION
DESKTOP PEDESTAL INSTALLATION
For proper ventilation, allow a clearance of 4 inches on each side and from the wall.
4 inches
4 inches
4 inches
4 inches
5
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARATION
POSITIONING YOUR DISPLAY
I
The image shown may be somewhat different from your set.
Adjust the position of the panel in various ways for maximum comfort.
• Tilt range
<M2394D>
<M2794D>
12
°~ 18
°
7°~ 13°
-6
°
~
-2°
-5
°
~
-2°
LOCATION
Position your set so that no bright light or sunlight falls directly onto the screen. Care should be taken
not to expose the set to any unnecessary vibration, moisture, dust or heat. Also, ensure that the set is
placed in a position to allow a free flow of air. Do not cover the ventilation openings on the back cover.
If you intend to mount the set to a wall, attach VESA standard mounting interface (optional parts) to the
back of the set.
When you install the set using the wall mounting bracket (optional parts), attach it carefully so it will not
drop.
Warning:
When adjusting the angle of the screen,do not put your
finger(s)in between the head of the monitor and the stand
body.You can hurt your finger(s).
6
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARATION
KENSINGTON SECURITY SYSTEM
- The product is equipped with a Kensington Security System connector on the back panel. Connect the
Kensington Security System cable as shown below.
- For detailed installation and use of the Kensington Security System, refer to the user’s guide provided with
the Kensington Security System.
http://www.kensington.com
For further information, contact
, the internet homepage of the
Kensington company. Kensington sells security systems for expensive electronic equipment such as note-
book PCs and LCD projectors.
NOTE
- The Kensington Security System is an optional accessory.
NOTES
a. If the product feels cold to the touch, there may be a small “flicker” when it is turned on.
This is normal, there is nothing wrong with product.
b. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots.
However, they have no adverse effect on the monitor's performance.
c. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time.
Doing so may produce some temporary distortion effects on the screen.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARATION
I
To prevent equipment damage, never plug in any power cords until you have finished connecting all equipment.
ANTENNA CONNECTION
I
For optimum picture quality, adjust antenna direction.
I
An antenna cable and converter are not supplied.
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
Wall
Antenna
Socket
ANTENNA
IN
RF Coaxial Wire (75 ohm)
Outdoor
Antenna
(VHF, UHF)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
UHF
ANTENNA
IN
Antenna
Signal
Amplifier
VHF
I
I
In poor signal areas, to get better picture quality, install a signal amplifier to the antenna as shown above.
If signal needs to be split for two TVs, use an antenna signal splitter for connection.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
|