LG Electronics Kitchen Entertainment Center L1717S User Manual

User’s Guide  
L1717S  
Make sure to read the Important Precautions before using the product.  
Keep the User's Guide(CD) in an accessible place for furture reference.  
See the label attached on the product and quote this information to your  
dealer when you require service.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Precautions  
On Installation  
Do not allow anything to rest upon or roll over the power cord, and do not place  
the display where the power cord is subject to damage.  
Do not use this display near water such as near a bathtub, washbowl, kitchen  
sink, laundry tub, in a wet basement, or near a swimming pool.  
Displays are provided with ventilation openings in the cabinet to allow the release  
of heat generated during operation. If these openings are blocked, built-up heat  
can cause failures which may result in a fire hazard. Therefore, NEVER:  
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.  
Place the display in a built-in enclosure unless proper ventilation is provided.  
Cover the openings with cloth or other material.  
Place the display near or over a radiator or heat source.  
Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,  
mar, or damage the Active Matrix LCD permanently.  
Do not press the LCD screen with your finger for a long time as this may cause  
some afterimages.  
Some dot defects may appear as Red, Green or Blue spots on the screen.  
However, this will have no impact or effect on the display performance.  
If possible, use the recommended resolution to obtain the best image quality for  
your LCD display. If used under any mode except the recommended resolution,  
some scaled or processed images may appear on the screen. However, this is  
characteristic of the fixed-resolution LCD panel.  
On Cleaning  
Unplug the display before cleaning the face of the display screen.  
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display  
screen because over-spraying may cause electrical shock.  
On Repacking  
Do not throw away the carton and packing materials. They make an ideal  
container in which to transport the unit. When shipping the unit to another  
location, repack it in its original material.  
On Disposal  
The fluorescent lamp used in this product contains a small amount of mercury.  
Do not dispose of this product with general household waste.  
Disposal of this product must be carried out in accordance to the regulations of  
your local authority.  
A2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting the Display  
Before setting up the monitor, ensure that the power to the monitor, the  
computer system, and other attached devices is turned off.  
Unfolding the stand base  
1. Place the monitor with its front facing upward on a cushion or soft cloth.  
Expand the stand base to its first step degree (70˚), pulling it apart with two  
hands.  
2. Place the monitor with its front facing downward and then further expand  
the stand base fully to 90 degrees. Do not apply excessive force to expand  
the stand base over 90 degrees as it may damage the monitor.  
3. Place the monitor upright and adjust the angle of the stand base as desired.  
Adjust the stand base angle with two hands, holding the monitor head.  
A3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting the Display  
Folding the stand base  
1. Face the front of the monitor and push the monitor backwards, following the  
sequence shown in the picture. Be careful not to squash your hands while  
you fold the stand base.  
This illustration depicts the general model of connection. Your monitor may  
differ from the items shown in the picture.  
Do not touch or apply force to the monitor screen while expanding or  
folding the stand base.  
A4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting the Display  
Using the Computer  
1.  
Connect the signal cable. When attached, tighten the thumbscrews to secure  
2. the connection.  
Connect the power cord into a proper power outlet that is easily accessible and  
close to the display.  
NOTE  
This is a simplified representation of the rear view.  
This rear view represents a general model; your display may differ from the view as shown.  
Signal Cable  
Power Cord  
Analog signal  
D-sub  
Varies according to model.  
1
Wall-outlet type  
2
PC-outlet type  
PC  
MAC  
Mac adapter  
For Apple Macintosh use, a separate plug adapter is needed to change  
the 15 pin high density (3 row) D-sub VGA connector on thesupplied  
cable to a 15 pin 2 row connector.  
3.  
Press  
button on the front switch panel to turn the  
power on. When monitor power is turned on, the 'Self  
Image Setting Function' is executed automatically.  
NOTE  
‘ Self Image Setting Function’? This function provides the user with optimal display settings.When the user  
connects the monitor for the first time, this function automatically adjusts the display to optimal settings for  
individual input signals. If you want to adjust the monitor while in use, or wish to manually run this function once  
again, push the ‘AUTO/SET’ button on the front panel of the monitor. Otherwise, you may execute the ‘ Factory  
reset’ option on the OSD adjustment menu. However, be aware that this option initializes all the menu items except  
‘Language’.  
A5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Control Panel Functions  
Front Panel Controls  
-
+
Control  
Function  
Use this button to enter or exit the On Screen Display.  
MENU Button  
OSD LOCKED/UNLOCKED  
This function allows you to lock the current control  
settings, so that they cannot be inadvertently changed.  
Press and hold the MENU button for 5 seconds. The  
message "OSD LOCKED" should appear.  
You can unlock the OSD controls at any time by pushing  
the MENU button for 5 seconds. The message "OSD  
UNLOCKED" should appear.  
Use these buttons to select or adjust functions in the On  
Screen Display.  
+
Buttons  
-
LightView hot key  
This feature lets you easily select the best desired  
image condition optimized to the environment  
(ambient illumination, image types etc).  
DAY  
NIGHT  
DAY : Bright ambient illumination  
NIGHT : Dark ambient illumination  
TEXT : For text images (Word processing etc.)  
MOVIE : For animation images in videos  
or movies  
PHOTO : For pictures or drawings  
NORMAL : This is under normal operating  
conditions  
A6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Control Panel Functions  
Control  
Function  
Use this button to enter a selection in the On Screen  
Display.  
AUTO/SET  
Button  
AUTO IMAGE ADJUSTMENT  
When adjusting your display settings, always press  
the AUTO/SET button before entering the On Screen  
Display(OSD). This will automatically adjust your  
display image to the ideal settings for the current  
screen resolution size (display mode).  
The best display mode is  
17 inch monitor : 1280x1024  
Power Button  
Use this button to turn the display on or off.  
This Indicator lights up green when the display  
operates normally(On Mode). If the display is in Sleep  
Mode (Energy Saving), this indicator color changes  
to amber.  
Power Indicator  
A7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
On Screen Display (OSD) Control Adjustment  
Screen Adjustment  
Making adjustments to the image size, position and operating parameters of  
the display is quick and easy with the On Screen Display Control system. A  
short example is given below to familiarize you with the use of the controls.  
The following section is an outline of the available adjustments and selections  
you can make using the OSD.  
NOTE  
Allow the display to stabilize for at least 30 minutes before making image adjustments.  
To make adjustments in the On Screen Display, follow these steps:  
AUTO/SET  
MENU  
MENU  
+
+
-
-
Press the MENU Button, then the main menu of the OSD appears.  
To access a control, use the  
becomes highlighted, press the AUTO/SET Button.  
or  
+
Buttons. When the icon you want  
-
+
Use the  
Buttons to adjust the item to the desired level.  
-
Accept the changes by pressing the MENU Button.  
Exit the OSD by Pressing the MENU Button.  
A8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
On Screen Display(OSD) Selection and Adjustment  
The following table indicates all the On Screen Display control, adjustment,  
and setting menus.  
Main menu  
Sub menu  
Reference  
To adjust the brightness, contrast  
and gamma of the screen  
PICTURE  
BRIGHTNESS  
CONTRAST  
GAMMA  
COLOR  
To customize the color of the  
screen  
PRESET 6500K  
9300K  
RED  
GREEN  
BLUE  
HORIZONTAL  
VERTICAL  
CLOCK  
To adjust the position of the  
screen  
POSITION  
TRACKING  
SETUP  
To improve the clarity and  
stability of the screen  
PHASE  
LANGUAGE  
To customize the screen status  
for a user's operating environment  
HORIZONTAL  
OSD  
POSITION  
VERTICAL  
WHITE BALANCE  
POWER INDICATOR  
FACTORY RESET  
: Adjustable  
NOTE  
The order of icons may differ depending on the model (A9~A12).  
A9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
On Screen Display(OSD) Selection and Adjustment  
You were introduced to the procedure of selecting and adjusting an item  
using the OSD system. Listed below are the icons, icon names, and icon  
descriptions of the all items shown on the Menu.  
Press the MENU Button, then the main menu of the OSD appears.  
Menu Name  
P I C T U R E  
Sub-menus  
Icons  
Button Tip  
MENU  
: Exit  
-
+
: Adjust (Decrease/Increase)  
: Enter  
SET  
: Select another sub-menu  
NOTE  
OSD (On Screen Display) menu languages on the monitor may differ from the manual.  
A10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
On Screen Display(OSD) Selection and Adjustment  
Main menu  
Sub menu  
Description  
PICTURE  
P I C T U R E  
To adjust the brightness of the screen.  
To adjust the contrast of the screen.  
BRIGHTNESS  
CONTRAST  
GAMMA  
Set your own gamma value. : -50/0/50  
On the monitor, high gamma values  
display whitish images and low gamma  
values display high contrast images.  
MENU : Exit  
: Decrease  
-
+
: Increase  
SET : Select another sub-menu  
COLOR  
C O L O R  
Select the screen color.  
PRESET  
• 6500K: Slightly reddish white.  
• 9300K: Slightly bluish white.  
Set your own red color levels.  
Set your own green color levels.  
Set your own blue color levels.  
RED  
GREEN  
BLUE  
MENU : Exit  
: Decrease  
-
+
: Increase  
SET : Select another sub-menu  
POSITION  
P O S I T I O N  
To move image left and right.  
To move image up and down.  
HORIZONTAL  
VERTICAL  
MENU : Exit  
: Decrease  
-
+
: Increase  
SET : Select another sub-menu  
A11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Main menu  
Sub menu  
Description  
TRACKING  
CLOCK  
To minimize any vertical bars or stripes  
visible on the screen background.The  
horizontal screen size will also change.  
T R A C K I N G  
PHASE  
To adjust the focus of the display. This  
item allows you to remove any  
horizontal noise and clear or sharpen  
the image of characters.  
MENU : Exit  
: Decrease  
-
+
: Increase  
SET : Select another sub-menu  
SETUP  
To choose the language in which the  
control names are displayed.  
LANGUAGE  
S E T U P  
OSD  
POSITION  
To adjust position of the OSD window  
on the screen.  
If the output of the video card is different  
the required specifications, the color  
level may deteriorate due to video  
signal distortion. Using this function, the  
signal level is adjusted to fit into the  
standard output level of the video card  
in order to provide the optimal image.  
Activate this function when white and  
black colors are present in the screen.  
WHITE  
BALANCE  
-
+
M E N U  
S E T U P  
SET  
Use this function to set the power  
indicator on the front side of the monitor  
to ON or OFF.  
If you set OFF, it will go off.  
If you set ON at any time, the power  
indicator will automatically be turned on.  
+
POWER  
INDICATOR  
-
M E N U  
SET  
MENU : Exit  
: Adjust  
-
+
: Adjust  
SET : Select another sub-menu  
FACTORY  
RESET  
Restore all factory default settings except  
"LANGUAGE."  
Press the  
button to reset immediately.  
If this does not improve the screen image, restore the factory default settings.  
If necessary, perform the white balance function again. This function will be enabled only when  
the input signal is an analog signal.  
A12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Check the following before calling for service.  
No image appears  
Is the power cord of the  
display connected?  
Check and see if the power cord is connected  
properly to the power outlet.  
Is the power indicator  
light on?  
Press the Power button.  
Is the power on and the  
power indicator blue or  
green?  
Adjust the brightness and the contrast.  
Is the power indicator  
amber?  
If the display is in power saving mode, try moving  
the mouse or pressing any key on the keyboard  
to bring up the screen.  
Try to turn on the PC.  
This message appears when the signal from the  
PC (video card) is out of horizontal or vertical  
frequency range of the display. See the  
'Specifications' section of this manual and  
configure your display again.  
Do you see an "OUT  
OF RANGE" message  
on the screen?  
This message appears when the signal cable  
between your PC and your display is not  
connected. Check the signal cable and try again.  
Do you see a "CHECK  
SIGNAL CABLE"  
message on the  
screen?  
Do you see a "OSD LOCKED" message on the screen?  
Do you see OSD  
LOCKEDwhen you  
push MENU button?  
You can secure the current control settings,  
so that they cannot be inadvertently  
changed. You can unlock the OSD controls  
at any time by pushing the MENU button for  
5 seconds: the message  
OSD UNLOCKEDwill appear.  
A13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Display image is incorrect  
Display Position is  
incorrect.  
Press the AUTO/SET button to automatically  
adjust your display image to the ideal setting.  
If the results are unsatisfactory, adjust the image  
position using the H position and V position  
icon in the on screen display.  
Check Control Panel --> Display --> Settings  
and see if the frequency or the resolution were  
changed. If yes, readjust the video card to the  
recommend resolution.  
On the screen  
background, vertical  
bars or stripes are  
visible.  
Press the AUTO/SET button to automatically  
adjust your display image to the ideal setting.  
If the results are unsatisfactory, decrease the  
vertical bars or stripes using the CLOCK icon in  
the on screen display.  
Any horizontal noise  
appearing in any  
image or characters  
are not clearly  
Press the AUTO/SET button to automatically  
adjust your display image to the ideal setting.  
If the results are unsatisfactory, decrease the  
horizontal bars using the PHASE icon in the on  
screen display.  
portrayed.  
Check Control Panel --> Display --> Settings  
and adjust the display to the recommended  
resolution or adjust the display image to the ideal  
setting. Set the color setting higher than 24 bits  
(true color).  
The screen color is  
mono or abnormal.  
Check if the signal cable is properly connected  
and use a screwdriver to fasten if necessary.  
Make sure the video card is properly inserted in  
the slot.  
Set the color setting higher than 24 bits (true  
color) at Control Panel - Settings.  
The screen blinks.  
Check if the screen is set to interlace mode and if  
yes, change it to the recommend resolution.  
Make sure the power voltage is high enough, It  
has to be higher than AC100-240V 50/60Hz.  
A14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Have you installed the display driver?  
Have you installed the  
display driver?  
Be sure to install the display driver from the  
display driver CD (or diskette) that comes with  
your display. Or, you can also download the  
Do you see an  
Make sure to check if the video card supports  
Plug&Play function.  
"Unrecognized monitor,  
Plug&Play (VESA DDC)  
monitor found"  
message?  
A15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
17 inches (43.2cm) Flat Panel Active matrix-TFT LCD  
Anti-Glare coating  
Display  
17 inches viewable  
0.264 mm pixel pitch  
Horizontal Freq. 30 - 83kHz (Automatic)  
Sync Input  
Vertical Freq.  
Input Form  
56 - 75Hz (Automatic)  
Separate TTL, Positive/Negative  
Composite TTL Positive/Negative  
SOG (Sync On Green)  
Signal Input  
Input Form  
15 pin D-Sub Connector  
RGB Analog (0.7Vp-p/75ohm)  
Video Input  
Max  
Recommend  
DDC 2B  
VESA 1280 x 1024@75Hz  
VESA 1280 x 1024@60Hz  
Resolution  
Plug&Play  
35W  
Power  
Consumption  
On Mode  
Sleep Mode  
1W  
1W  
Off Mode  
Full Up Position  
Folded Position  
Dimensions  
&Weight  
(with tilt stand)  
Width 38.61 cm / 15.20 inches  
Height 38.35 cm / 15.09 inches  
38.61cm / 15.20 inches  
44.0 cm / 17.32 inches  
6.6 cm / 2.55 inches  
Depth  
Net  
19.0 cm / 7.48 inches  
4.4 kg (9.70 lbs)  
Tilt Range  
Tilt  
0˚~20˚  
Power Input  
AC 100-240V~ 50/60Hz 1.0A  
Operating Conditions  
Environmental  
Conditions  
Temperature 10˚C to 35 ˚C  
Humidity  
10 % to 80 % non-Condensing  
Storage Conditions  
Temperature -20˚C to 60 ˚C  
Humidity  
5 % to 95 % non-Condensing  
Tilt Stand  
Attached( O ), Detached (  
)
Signal cable  
Attached( ), Detached ( O )  
Power cord  
Wall-outlet type or PC-outlet type  
NOTE  
Information in this document is subject to change without notice.  
A16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
PRESET MODE  
Display Modes (Resolution)  
Horizontal Freq. (kHz)  
Vertical Freq. (Hz)  
1
2
3
4
5
6
7
8
9
10  
11  
*12  
13  
31.469  
31.468  
31.469  
37.500  
37.879  
46.875  
49.725  
48.363  
60.023  
68.681  
61.805  
63.981  
79.976  
VGA  
VGA  
VGA  
640 x 350  
720 x 400  
640 x 480  
640 x 480  
800 x 600  
800 x 600  
832 x 624  
1024 x 768  
1024 x 768  
1152 x 870  
1152 x 900  
1280 x 1024  
1280 x 1024  
70  
70  
60  
75  
60  
75  
75  
60  
75  
75  
65  
60  
75  
VESA  
VESA  
VESA  
MAC  
VESA  
VESA  
MAC  
VESA  
VESA  
VESA  
*Recommend Mode  
Indicator  
Mode  
LED Color  
On Mode  
Sleep Mode  
Off Mode  
Green  
Amber  
Off  
A17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications - Optional  
VESA wall mounting  
Connected to another object (stand type and wall-  
mounted type. This monitor accepts a VESA-  
compliant mounting interface pad.- optional)  
For further information, refer to the VESA Wall  
Mounting Instruction Guide.  
Kensington Security Slot- optional  
Connected to a locking  
cable that can be purchased  
separately at most computer  
stores  
A18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Digitally yours  
A19  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Lasko Electric Heater 5841 User Manual
LG Electronics Blu ray Player HR931M User Manual
LG Electronics Stereo System LH E922PB User Manual
LG Electronics Stereo System MCD112B User Manual
Lightolier Indoor Furnishings VRA1G8LS132 User Manual
Mackie Home Theater Screen MR5 User Manual
Makita Power Hammer HR2450FT User Manual
Maytag Refrigerator MBL1956KES5 User Manual
Melissa Landscape Lighting 677 001 User Manual
Mercury Automobile 2003 Sable User Manual