LG Electronics Home Theater System BH6730S User Manual

OWNER’S MANUAL  
SMART 3D Blu-ray™  
HOME THEATER SYSTEM  
Please read this manual carefully before operating  
your set and retain it for future reference.  
BH6730S (BH6730S, S63S2-S/ C, S63T1-W)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
3
CAUTION: The apparatus shall not be exposed to  
water (dripping or splashing) and no objects filled  
with liquids, such as vases, shall be placed on the  
apparatus.  
FCC RF Radiation Exposure Statement : This  
equipment complies with FCC radiation exposure  
limits set forth for an uncontrolled environment.  
This equipment should be installed and operated  
with minimum distance 20 cm between the  
radiator and your body. End users must follow the  
specific operating instructions for satisfying RF  
exposure compliance. This transmitter must not be  
co-located or operating in conjunction with any  
other antenna or transmitter.  
1
FCC Compliance Statement  
This device complies with part 15 of the FCC rules.  
Operation is subject to the following two  
conditions:  
FCC Radio Frequency Interference  
Requirements  
(1) This device may not cause harmful interference,  
and  
This device is restricted to indoor use due to its  
operation in the 5.15 to 5.25 GHz frequency range.  
FCC requires this product to be used indoors for  
the frequency range 5.15 to 5.25 GHz to reduce the  
potential for harmful interference to co-channel  
Mobile Satellite systems. High power radars are  
allocated as primary users of the 5.25 to 5.35 GHz  
and 5.65 to 5.85 GHz bands. These radar stations  
can cause interference with and/or damage this  
device. This device cannot be co-located with any  
other transmitter.  
(2) This device must accept any interference  
received, including interference that may cause  
undesired operation.  
NOTE: This equipment has been tested and found  
to comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC Rules. These limits are  
designed to provide reasonable protection against  
harmful interference in a residential installation. This  
equipment generates, uses, and can radiate radio  
frequency energy and, if not installed and used  
in accordance with the instructions, may cause  
harmful interference to radio communications.  
However, there is no guarantee that interference  
will not occur in a particular installation.  
CAUTION: Regulations of the FCC and FAA prohibit  
airborne operation of radio-frequency wireless  
devices because their signals could interfere with  
critical aircraft instruments.  
If this equipment does cause harmful interference  
to radio or television reception, which can be  
determined by turning the equipment off and  
on, the user is encouraged to try to correct the  
interference by one or more of the following  
measures:  
Responsible Party :  
LG Electronics USA, Inc. 1000 Sylvan Avenue  
Englewood Cliffs, NJ 07632  
TEL. : +1-800-243-0000  
Reorient or relocate the receiving antenna.  
y
y
Increase the separation between the equipment  
and receiver.  
Connect the equipment into an outlet on a  
circuit different from that to  
y
which the receiver is connected.  
y
y
Consult the dealer or an experienced radio/TV  
technician for help.  
CAUTION: Any changes or modifications not  
expressly approved by the party responsible for  
compliance could void the user’s authority to  
operate this equipment  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Getting Started  
Caution  
Watching a 3D content for a long period  
time may cause dizziness or tiredness.  
Notes on copyrights  
>
y
y
Because AACS (Advanced Access Content  
System) is approved as content protection  
system for Blu-ray Disc format, similar to use of  
CSS (Content Scramble System) for DVD format,  
certain restrictions are imposed on playback,  
analog signal output, etc., of AACS protected  
content. The operation of this product and  
restrictions on this product may vary depending  
on your time of purchase as those restrictions  
may be adopted and/or changed by AACS after  
the production of this product.  
y
It is not recommended to watch a movie  
in 3D mode for infirm, child and pregnant  
woman.  
1
If you are experiencing headache, tiredness  
or dizziness while viewing content in 3D,  
it is strongly recommended to stop the  
playback and rest until you feel normal.  
y
Furthermore, BD-ROM Mark and BD+ are  
additionally used as content protection systems  
for Blu-ray Disc format, which imposes certain  
restrictions including playback restrictions for  
BD-ROM Mark and/or BD+ protected content. To  
obtain additional information on AACS, BD-ROM  
Mark, BD+, or this product, please contact an  
authorized Customer Service Center.  
y
Many BD-ROM/DVD discs are encoded with  
copy protection. Because of this, you should only  
connect your player directly to your TV, not to a  
VCR. Connecting to a VCR results in a distorted  
picture from copy-protected discs.  
y
y
This product incorporates copyright protection  
technology that is protected by U.S. patents  
and other intellectual property rights. Use of  
this copyright protection technology must be  
authorized by Rovi Corporation, and is intended  
for home and other limited viewing uses only  
unless otherwise authorized by Rovi Corporation.  
Reverse engineering or disassembly is prohibited.  
Under the U.S. Copyright laws and Copyright  
laws of other countries, unauthorized recording,  
use, display, distribution, or revision of television  
programs, videotapes, BD-ROM discs, DVDs, CDs  
and other materials may subject you to civil and/  
or criminal liability.  
y
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
5
14. Refer all servicing to qualified service personnel.  
Servicing is required when the apparatus has  
been damaged in any way, such as power-  
supply cord or plug is damaged, liquid has been  
spilled or objects have fallen into the apparatus,  
the apparatus has been exposed to rain or  
moisture, does not operate normally, or has  
been dropped.  
IMPORTANT SAFETY  
INSTRUCTIONS  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
1
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with dry cloth.  
7. Do not block any ventilation openings.  
Install in accordance with the manufacturer’s  
instructions.  
8. Do not install near any heat sources such  
as radiators, heat registers, stoves, or other  
apparatus (including amplifiers) that produce  
heat.  
9. Do not defeat the safety purpose of the  
polarized or grounding-type plug. A polarized  
plug has two blades with one wider than the  
other. A grounding type plug has two blades  
and a third grounding prong. The wide blade or  
the third prong are provided for your safety. If  
the provided plug does not fit into your outlet,  
consult an electrician for replacement of the  
obsolete outlet.  
10. Protect the power cord from being walked on  
or pinched particularly at plugs, convenience  
receptacles, and the point where they exit from  
the apparatus.  
11. Only use attachments/accessories specified by  
the manufacturer.  
12. Use only with the cart, stand,  
tripod, bracket, or table specified  
by the manufacturer, or sold  
with the apparatus. When a  
cart is used, use caution when  
moving the cart/apparatus  
combination to avoid injury from tip-over.  
13. Unplug this apparatus during lightning storms  
or when unused for long periods of time.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
Table of Contents  
33 Sound Effect  
Table of Contents  
4
Operating  
34 Home Menu Display  
1
Getting Started  
34 – Using [HOME] menu  
34 – Using the Smart Share  
35 Playing the Linked Devices  
35 – Playing a disc  
35 – Playing Blu-ray 3D disc  
36 – Playing a file on disc/USB device  
37 – Playing a file on a network server  
38 Using Home Network Server for PC  
38 – Installing Nero MediaHome 4  
Essentials  
2
8
8
Safety Information  
Introduction  
– Playable discs and symbols used in  
this manual  
– About the “7” symbol display  
– Regional code  
9
9
10 Remote Control  
11  
11  
Front Panel  
Rear Panel  
38 – Sharing files and folders  
39 – About Nero MediaHome 4 Essentials  
39 – System requirements  
40 General Playback  
40 – Basic operations for video and audio  
content  
40 – Basic operations for photo content  
40 – Using the disc menu  
41 – Resume playback  
2
Connecting  
12  
13  
Positioning the System  
Speaker Connection  
13 – Attaching the speakers to the player  
14 Connecting to Your TV  
15 – What is SIMPLINK?  
15 – ARC (Audio Return Channel) function  
16 – Resolution setting  
41 – Last scene memory  
42 On-Screen Display  
17  
17  
17  
Antenna Connection  
Connections with External Device  
– AUX connection  
42 – To control video playback  
42 – Displaying content information on-  
screen  
18 – PORT. IN connection  
44 Advanced Playback  
18 – OPTICAL IN connection  
44 – Repeat playback  
19  
Connecting to Your Home Network  
44 – Repeating a specific portion  
44 – Playing from selected time  
45 – Selecting a subtitle language  
45 – Hearing a different audio  
45 – Watching from a different angle  
45 – Changing the TV Aspect Ratio  
46 – Changing Subtitle Code Page  
46 – Changing the Picture Mode  
46 – Viewing content information  
47 – Changing content list view  
47 – Selecting a subtitle file  
48 – Listening to music during slide show  
48 – Setting the [3D] option  
49 Advanced Features  
19 – Wired network connection  
19 – Wired network setup  
21 – Wireless network connection  
21 – Wireless network setup  
3
System Setting  
24 Initial Setup  
25 Settings  
25 – Adjust the setup settings  
26 – [NETWORK] menu  
27 – [DISPLAY] menu  
28 – [LANGUAGE] menu  
29 – [AUDIO] menu  
31 – [LOCK] menu  
32 – [OTHERS] menu  
49 – Wi-Fi Direct™  
50 – Enjoying BD-Live™  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
7
50 – LG AV Remote  
65 Network Software Update  
50 – Private Sound Mode  
51 – Viewing information from Gracenote  
Media Database  
52 – Audio CD recording  
52 – Recording from FM radio or AUX/  
PORTABLE source  
65 – Network update notification  
65 – Software update  
67 Additional Information  
67 – File requirement  
68 – AVCHD (Advanced Video Codec High  
Definition)  
1
53 Radio Operations  
69 – About DLNA  
53 – Listening to the radio  
53 – Presetting the radio stations  
53 – Deleting a saved station  
53 – Deleting all the saved stations  
53 – Improving poor FM reception  
54 Playing the iPod  
54 – Enjoying iPod on the screen  
54 – Enjoying the iPod IN mode  
56 Using Bluetooth technology  
56 – Listening to music stored on the  
Bluetooth devices  
58 Using the Premium  
58 Using the LG Smart World  
59 – Signing in  
59 – Searching online content  
60 Using the My Apps Menu  
69 – Certain system requirements  
69 – Compatibility notes  
70 Audio Output Specifications  
2
3
4
5
6
71  
Area Code List  
72 Language Code List  
73 Trademarks and Licenses  
76 Specifications  
78 Maintenance  
78 – Handling the unit  
78 – Notes on discs  
79 Important Information relating to Network  
Services  
5
Troubleshooting  
61  
Troubleshooting  
61 – General  
62 – Network  
63 – Picture  
63 – Sound  
63 – Customer Support  
63 – Open Source Software Notice  
6
Appendix  
64 Controlling a TV with the Supplied  
Remote Control  
64 – Setting up the remote to control your  
TV  
Some of the content in this manual may differ from your player depending on the software of the  
player or your service provider.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
Getting Started  
Introduction  
1
Playable discs and symbols used in this manual  
Media/Term  
Logo  
Symbol  
Description  
Discs such as movies that can be purchased or  
rented.  
y
e
“Blu-ray 3Ddiscs andBlu-ray 3D ONLYdiscs.  
BD-R/RE discs that are recorded in BDAV format.  
y
y
Blu-ray  
BD-R/RE discs that contain Video, Audio or  
Photo files.  
y
y
u
i
ISO 9660+JOLIET, UDF and UDF Bridge format  
y
Discs such as movies that can be purchased or  
rented.  
y
r
Video mode and finalized only  
Supports the dual layer disc also  
y
y
DVD-ROM  
DVD-R  
Finalized AVCHD format  
DVD-RW  
DVD+R  
o
DVD+RW  
(8 cm, 12 cm)  
DVD R/RW discs that contain Video, Audio or  
Photo files.  
y
y
y
u
i
ISO 9660+JOLIET, UDF and UDF Bridge format  
DVD-RW (VR)  
(8 cm, 12 cm)  
VR mode and finalized only  
Audio CD  
r
t
Audio CD  
(8 cm, 12 cm)  
CD-R/RW discs that contain Video, Audio or  
Photo files.  
y
y
y
u
i
CD-R/RW  
(8 cm, 12 cm)  
ISO 9660+JOLIET, UDF and UDF Bridge format  
Indicates special notes and operating features.  
Note  
,
>
Indicates cautions for preventing possible damages  
from abuse.  
Caution  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
9
Note  
,
About the “ ” symbol display  
7
Depending on the conditions of the  
recording equipment or the CD-R/RW (or  
DVD R/RW) disc itself, some CD-R/RW (or  
DVD R/RW) discs cannot be played on the  
unit.  
y
7may appear on your TV display during  
operation and indicates that the function explained  
in this owner’s manual is not available on that  
specific media.  
1
Depending on the recording software & the  
finalization, some recorded discs (CD-R/RW,  
DVD R/RW, BD-R/RE) may not be playable.  
y
y
Regional code  
This unit has a regional code printed on the rear of  
the unit. This unit can play only BD-ROM or DVD  
discs labeled same as the rear of the unit orALL”.  
BD-R/RE, DVD R/RW and CD-R/RW discs  
recorded using a personal computer or a  
DVD or CD Recorder may not play if the  
disc is damaged or dirty, or if there is dirt or  
condensation on the player’s lens.  
If you record a disc using a personal  
computer, even if it is recorded in a  
compatible format, there are cases in which  
it may not play because of the settings of  
the application software used to create the  
disc. (Check with the software publisher for  
more detailed information.)  
y
This player requires discs and recordings to  
meet certain technical standards in order to  
achieve optimal playback quality.  
y
y
Pre-recorded DVDs are automatically set to  
these standards. There are many different  
types of recordable disc formats (including  
CD-R containing MP3 or WMA files) and  
these require certain pre-existing conditions  
to ensure compatible playback.  
Customers should note that permission  
is required in order to download MP3 /  
WMA files and audio from the Internet.  
Our company has no right to grant such  
permission. Permission should always be  
sought from the copyright owner.  
y
y
You have to set the disc format option  
to [Mastered] in order to make the discs  
compatible with the LG players when  
formatting rewritable discs. When setting  
the option to Live System, you cannot use  
it on LG player. (Mastered/Live File System :  
Disc format system for windows Vista)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10 Getting Started  
Remote Control  
• • • • • • a • • • • • •  
• • • • • • c • • • • •  
1
FUNCTION  
FUNCTION: Changes input mode. SPEAKER LEVEL: Sets the sound  
level of desired speaker.  
SUBTITLE: Selects a subtitle  
INFO/MENU  
language.  
SOUND EFFECT: Selects a sound  
effect mode.  
1(POWER): Switches the player  
ON or OFF.  
VOL +/-: Adjusts speaker volume.  
B(OPEN/CLOSE): Ejects a disc.  
OPTICAL/ TV SOUND : Changes  
input mode to optical directly.  
SLEEP: Sets a certain period of  
time after which the unit will  
switch to off.  
MUTE: Mute the unit.  
Colored (R, G, Y, B) buttons:  
- Use to navigate BD-ROM menus.  
They are also used as shortcut  
buttons for specific menus.  
- B button: Selects mono/ stereo  
in FM mode.  
INFO/MENU (m): Displays or  
exits On-Screen Display.  
HOME ( ): Displays or exits the  
[Home Menu].  
DISC MENU: Accesses menu on a  
disc.  
0-9 numerical buttons: Selects  
numbered options in a menu.  
• • • • • • b • • • • •  
CLEAR: Removes a mark on the  
search menu or a number when  
setting the password.  
Direction buttons: Selects an  
option in the menu.  
PRESET +/-: Selects programme  
of Radio.  
REPEAT (h): Repeats a desired  
section or sequence.  
TUNING +/-: Tunes in the desired  
radio station.  
MUSIC ID: When connected  
to the network, can provide  
information about the current  
song while movie playback.  
ENTER (b): Acknowledges menu  
selection.  
AUDIO: Selects an audio language  
or audio channel.  
BACK ( ): Exits the menu or  
returns to the previous screen.  
X(REC): Records from an Audio  
CD, FM radio or AUX source to  
USB.  
TITLE/POPUP: Displays the DVD  
title menu or BD-ROM’s pop-up  
menu, if available.  
Battery Installation  
?: Marked button is not available.  
Z(STOP): Stops playback.  
z(PLAY): Starts playback.  
• • • • • • d • • • • •  
M(PAUSE/STEP): Pauses  
playback.  
TV Control Buttons: See page  
C/V(SKIP): Goes to the  
next or previous chapter / track /  
file.  
Remove the battery cover on the  
rear of the Remote Control, and  
insert R03 (size AAA) battery with  
4and 5matched correctly.  
c/v(SCAN): Searches  
backward or forward.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started 11  
Front Panel  
a
b
c
1
d
e
a Disc Tray  
d PORT. IN  
b Display Window  
e USB (iPod/iPhone/iPad) Port  
c Operation buttons  
R(Open / Close)  
T(Play / Pause)  
I(Stop)  
F (Function)  
Changes the input source or function.  
VOL -/+  
1/!(Power)  
Rear Panel  
a
b
c
d e f g  
h
a AC power cord  
b Speakers connectors  
c Cooling Fan  
g LAN port  
h HDMI OUT TO TV  
d AUX (L/R) INPUT  
e OPTICAL IN  
f Antenna Connector  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12 Connecting  
Caution  
Be careful to make sure children not to put  
their hands or any objects into the *speaker  
duct.  
*Speaker duct: A hole for plentiful bass  
sound on speaker cabinet (enclosure).  
>
Positioning the System  
The following illustration shows an example of  
positioning the system. Note that the illustrations  
in these instructions differ from the actual unit for  
explanation purposes.  
For the best possible surround sound, all the  
speakers other than the subwoofer should be  
placed at the same distance from the listening  
y
y
y
y
Place the center speaker at a safe distance  
from the child’s reach.  
Otherwise it may result in the speaker falling  
down and causing personal injury and/or  
property damage.  
2
position ( ).  
A
The speakers contain magnetic parts, so  
colour irregularity may occur on the CRT  
TV screen or PC monitor screen. Please use  
the speakers away from the TV screen or PC  
monitor screen.  
B
C
G
A
Before using the subwoofer, remove the  
protective vinyl.  
F
A
A
A
E
A
A
D
Front left speaker (L)/  
Front right speaker (R):  
A
B
Place the front speakers to the sides of the monitor  
or screen and as flush with the screen surface as  
possible.  
Center speaker:  
C
Place the center speaker above or below the  
monitor or screen.  
Surround left speaker (L)/  
Surround right speaker (R):  
D
E
Place these speakers behind your listening position,  
facing slightly inwards.  
Subwoofer:  
F
The position of the subwoofer is not so critical,  
because low bass sounds are not highly directional.  
But it is better to place the subwoofer near the  
front speakers. Turn it slightly toward the center of  
the room to reduce the wall reflections.  
Unit  
G
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting 13  
To connect the cable to the speakers, press each  
plastic finger pad to open the connection terminals  
on the base of each speaker. Insert the wire and  
release the finger pad.  
Speaker Connection  
Attaching the speakers to the  
player  
Caution  
>
Be careful to make sure children do not put  
y
their hands or any objects into the *speaker  
duct.  
*Speaker duct : A hole for plentiful bass  
sound on speaker cabinet (enclosure).  
1. Connect the wires to the unit.  
Match each wire’s colored band to the same  
colored connection terminal on the rear of the  
unit. To connect the cable to the unit, press  
each plastic finger pad to open the connection  
terminal. Insert the wire and release the finger  
pad.  
2
The speakers contain magnet parts, so color  
irregularity may occur on the TV screen or  
PC monitor screen. Please use the speakers  
far away from either TV screen or PC  
monitor.  
y
Connect the black stripe of each wire to the  
terminals marked -(minus) and the other end  
to the terminals marked + (plus).  
Connect a woofer cord to the player. When  
connecting a woofer cord to the player, insert  
the connector until it clicks.  
2. Connect the wires to the speakers.  
Connect the other end of each wire to the  
correct speaker according to the color coding:  
Color  
Grey  
Speaker  
Rear  
Position  
Rear right  
Rear left  
Center  
Blue  
Rear  
Green  
Center  
Sub  
woofer  
Orange  
Any front position  
Red  
Front  
Front  
Front right  
Front left  
White  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
14 Connecting  
Note  
,
Connecting to Your TV  
If you have a HDMI TV or monitor, you can connect  
it to this player using a HDMI cable (Type A, High  
speed HDMI™ cable with Ethernet). Connect the  
HDMI jack on the player to the HDMI jack on a  
HDMI compatible TV or monitor.  
If a connected HDMI device does not accept  
the audio output of the player, the HDMI  
device’s audio sound may be distorted or  
may not output.  
y
When you use HDMI connection, you can  
change the resolution for the HDMI output.  
(Refer toResolution settingon page 16 )  
y
y
Select the type of video output from the  
HDMI OUT jack using [HDMI Color Setting]  
option on the [Settings] menu (see page  
2
Rear of the unit  
Changing the resolution when the  
connection has already been established  
may result in malfunctions. To solve the  
problem, turn off the player and then turn it  
on again.  
y
When the HDMI connection with HDCP  
is not verified, TV screen is changed to  
black screen. In this case, check the HDMI  
connection, or disconnect the HDMI cable.  
y
y
HDMI cable not included  
TV  
If there are noises or lines on the screen,  
please check the HDMI cable (length is  
generally limited to 4.5 m(15 ft.)).  
Set the TV’s source to HDMI (refer to TV’s Owner’s  
manual).  
Additional Information for HDMI  
When you connect a HDMI or DVI compatible  
device make sure of the following:  
y
-
Try switching off the HDMI/DVI device and  
this player. Next, switch on the HDMI/DVI  
device and leave it for around 30 seconds,  
then switch on this player.  
-
-
The connected device’s video input is set  
correctly for this unit.  
The connected device is compatible with  
720x480p, 1280x720p, 1920x1080i or  
1920x1080p video input.  
Not all HDCP-compatible HDMI or DVI devices  
will work with this player.  
y
-
The picture will not be displayed properly  
with non-HDCP device.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting 15  
What is SIMPLINK?  
ARC (Audio Return Channel)  
function  
The ARC function enables an HDMI capable TV to  
send the audio stream to HDMI OUT of this player.  
Some functions of this unit are controlled by the  
TVs remote control when this unit and LG TV’s with  
SIMPLINK are connected through HDMI connection.  
To use this function:  
-
Your TV must support the HDMI-CEC and ARC  
function and the HDMI-CEC and ARC must be  
set to On.  
Controllable functions by LG TV’s remote control;  
Play, Pause, Scan, Skip, Stop, Power Off, etc.  
-
The setting method of HDMI-CEC and ARC may  
differ depending on the TV. For details about  
ARC function, refer to your TV manual.  
Refer to the TV owner’s manual for the details of  
SIMPLINK function.  
2
LG TV’s with SIMPLINK function has the logo as  
shown above.  
-
-
You must use the HDMI cable (Type A, High  
Speed HDMI™ cable with Ethernet).  
Note  
You must connect with the HDMI IN that  
supports the ARC function using the HDMI OUT  
on this player.  
,
Depending on the disc type or playing status,  
some SIMPLINK operation may differ from your  
purpose or not work.  
-
You can connect only one Home Theater to TV  
compatible with ARC.  
Note  
,
To activate [SIMPLINK / ARC] function, set this  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
16 Connecting  
Note  
,
Resolution setting  
The player provides several output resolutions for  
HDMI OUT jack. You can change the resolution  
using [Settings] menu.  
If your TV does not accept the resolution  
you have set on the player, you can set  
resolution to 480p as follows:  
y
1. Press Bto open the disc tray.  
1. Press HOME ( ).  
2
Press Z(STOP) for more than 5 seconds.  
2. Use A/Dto select the [Settings] and press  
If you select a resolution manually and then  
connect the HDMI jack to TV and your TV  
does not accept it, the resolution setting is  
set to [Auto].  
y
y
ENTER (b). The [Settings] menu appears.  
3. Use W/Sto select [DISPLAY] option then  
press Dto move to the second level.  
2
4. Use W/Sto select the [Resolution] option  
If you select a resolution that your TV  
does not accept, the warning message  
will appear. After resolution change,  
if you cannot see the screen, please  
wait 20 seconds and the resolution will  
automatically revert back to the previous  
resolution.  
then press ENTER (b) to move to the third level.  
The 1080p video output frame rate may  
be automatically set to either 24 Hz or  
60 Hz depending both on the capability  
and preference of the connected TV and  
based on the native video frame rate of the  
content on the BD-ROM disc.  
y
5. Use W/Sto select the desired resolution then  
press ENTER (b) to confirm your selection.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connecting 17  
Antenna Connection  
Connect the supplied antenna for listening to the  
radio.  
Connections with  
External Device  
AUX connection  
You can enjoy the sound from an external  
component through the speakers of this system.  
Connect the analog audio output jacks of your  
component into the AUX L/R (INPUT) on this unit.  
And then select the [AUX] option by pressing  
FUNCTION.  
2
You can also use the F (Function) button on the  
front panel to select the input mode.  
Rear of the unit  
Rear of the unit  
Note  
,
Be sure to fully extend the FM wire antenna.  
Red  
White  
To the audio output jacks  
of your component  
(TV, VCR, etc.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
18 Connecting  
PORT. IN connection  
OPTICAL IN connection  
You can enjoy the sound from your component  
with a digital optical connection through the  
speakers of this system.  
You can enjoy the sound from your portable audio  
player through the speakers of this system.  
Connect the headphones (or line out ) jack of the  
portable audio player into the PORT. IN socket of  
this unit. And then select the [PORTABLE] option by  
pressing FUNCTION.  
Connect the optical output jack of your component  
into the OPTICAL IN jack on the unit. And then  
select the [OPTICAL] option by pressing FUNCTION.  
Or press OPTICAL / TV SOUND to select directly.  
You can also use the F (Function) button on the  
front panel to select the input mode.  
You can also use the F (Function) button on the  
front panel to select the input mode.  
2
Rear of the unit  
To the digital  
optical output jack  
of your component  
Optical cable  
not included  
MP3 player, etc...  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting 19  
Connecting to Your  
Home Network  
Broadband  
service  
This player can be connected to a local area  
network (LAN) via the LAN port on the rear panel or  
the internal wireless module.  
By connecting the unit to a broadband home  
network, you have access to services such as  
software updates, BD-Live interactivity and online  
content services.  
2
Router  
Wired network connection  
Using a wired network provides the best  
performance, because the attached devices  
connect directly to the network and are not subject  
to radio frequency interference.  
DLNA certified servers  
Please refer to the documentation for your network  
device for further instructions.  
Connect the player’s LAN port to the corresponding  
port on your Modem or Router using a  
commercially available LAN or Ethernet cable.  
Note  
,
When plugging or unplugging the LAN  
cable, hold the plug portion of the cable.  
When unplugging, do not pull on the LAN  
cable but unplug while pressing down on  
the lock.  
y
Rear of the unit  
Wired network setup  
Do not connect a modular phone cable to  
the LAN port.  
y
y
If there is a DHCP server on the local area network  
(LAN) via wired connection, this player will  
automatically be allocated an IP address. After  
making the physical connection, a small number of  
home networks may require the player’s network  
setting to be adjusted. Adjust the [NETWORK]  
setting as follow.  
Since there are various connection  
configurations, please follow the  
specifications of your telecommunication  
carrier or internet service provider.  
If you want to access content from DLNA  
servers, this player must be connected to  
the same local area network with them via a  
router.  
y
y
Preparation  
To set your PC as a DLNA server, install the  
supplied Nero MediaHome 4 on your PC.  
Before setting the wired network, you need to  
connect the broadband internet to your home  
network.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
20 Connecting  
1. Select [Connection Setting] option in the  
2. Use W/S/A/Dto select the IP mode  
between [Dynamic] and [Static].  
[Settings] menu then press ENTER (b).  
Normally, select [Dynamic] to allocate an IP  
address automatically.  
2
2. Read the preparations for the network settings  
and then press ENTER (b) while [Start] is  
highlighted.  
Note  
,
If there is no DHCP server on the network and  
you want to set the IP address manually, select  
[Static] then set [IP Address], [Subnet Mask],  
[Gateway] and [DNS Server] using W/S/  
A/Dand numerical buttons. If you make a  
mistake while entering a number, press CLEAR  
to clear the highlighted part.  
Network will automatically be connected to the  
unit.  
3. Select [Next] and press ENTER (b) to apply  
network settings.  
Network connection status is displayed on the  
screen.  
Advanced Setting  
If you want to set the network settings manually,  
use W/Sto select [Advanced Setting] on the  
[Network Setting] menu and press ENTER (b).  
4. Press ENTER (b) while [OK] is highlighted to  
finish the wired network settings.  
1. Use W/Sto select [Wired] and press ENTER  
(b).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting 21  
Wireless network connection  
Wireless network setup  
Another connection option is to use an Access Point  
or a wireless router. The network configuration and  
connection method may vary depending on the  
equipment in use and the network environment.  
For the wireless network connection, the player  
needs to be set up for network communication.  
This adjustment can be done from the [Settings]  
menu. Adjust the [NETWORK] setting as follow.  
Setting up the access point or the wireless router  
is required before connecting the player to the  
network.  
2
Preparation  
Wireless  
Communication  
Before setting the wireless network, you need  
to:  
-
connect the broadband internet to the  
wireless home network.  
DLNA certified servers  
-
-
set the access point or wireless router.  
note the SSID and security code of the  
network.  
Access Point or  
Wireless Router  
1. Select [Connection Setting] option in the  
[Settings] menu then press ENTER (b).  
2. Read the preparations for the network settings  
and then press ENTER (b) while [Start] is  
highlighted.  
Broadband  
service  
Refer to the setup instructions supplied with  
your access point or wireless router for detailed  
connection steps and network settings.  
For best performance, a direct wired connection  
from this player to your home network’s router or  
cable/DSL modem is always the best option.  
If you choose to use the wireless option, please  
note that performance can sometimes be affected  
by other electronic devices in the home.  
If wired network is not connected to the unit, all  
available networks are displayed on the screen.  
3. Use W/Sto select a desired SSID of wireless  
network and press ENTER (b).  
If you have security on your access point, you  
need to input the security code as necessary.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
22 Connecting  
Note  
,
Advanced Setting  
If you want to set the network settings manually,  
use W/Sto select [Advanced Setting] on the  
[Network Setting] menu and press ENTER (b).  
If you use other characters than the english  
alphabet or digits for the SSID name of your  
access point or wireless router, it may be  
displayed differently.  
1. Use W/Sto select [Wireless] and press ENTER  
(b).  
2
[AP List] - Scans all available access points or  
wireless routers within range and display them  
as a list.  
Note  
,
WEP security mode generally have 4 keys  
available on an access point setting. If your  
access point or wireless router use WEP  
security, enter the security code of the key  
“No.1to connect on your home network.  
y
y
[Network name (SSID)] – Your access point  
may not be broadcasting its network name  
(SSID). Check your access point settings through  
your computer and either set your access  
point to broadcast SSID, or manually enter the  
network name in [Network name(SSID)].  
An Access Point is a device that allows you  
to connect to your home network wirelessly.  
[PBC] – If your access point or wireless  
router that supports the PBC (Push Button  
Configuration) method, select this option and  
press the Push Button on your access point  
within 120 counts. You do not need to know the  
network name (SSID) and security code of your  
access point.  
4. Use W/S/A/Dto select the IP mode  
between [Dynamic] and [Static].  
Normally, select [Dynamic] to allocate an IP  
address automatically.  
Note  
,
If there is no DHCP server on the network and  
you want to set the IP address manually, select  
[Static] then set [IP Address], [Subnet Mask],  
[Gateway] and [DNS Server] using W/S/  
A/Dand numerical buttons. If you make a  
mistake while entering a number, press CLEAR  
to clear the highlighted part.  
[PIN] – If your access point supports the PIN  
Code configuration method based on WPS(Wi-  
Fi Protected Setup), select this option and  
note the code number on the screen. And  
then, enter the PIN number on a setting menu  
of your access point to connect. Refer to the  
documentation for your network device.  
5. Select [Next] and press ENTER (b) to apply  
2. Follow the instructions of each connection  
method on the screen.  
network settings.  
Note  
,
To use PBC and PIN network connection,  
security mode of your access point must be  
set to OPEN or AES.  
Network connection status is displayed on the  
screen.  
6. Select [OK] and press ENTER (b) to complete  
the network connection.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting 23  
subscriber agreement with your ISP, you may not  
be able to use the internet connection feature  
contained in this player or you may be limited  
to the number of devices you can connect at  
the same time. (If your ISP limits subscription to  
one device, this player may not be allowed to  
connect when a PC is already connected.)  
Notes on network connection  
Many network connection problems during  
set up can often be fixed by re-setting the  
router or modem. After connecting the player  
to the home network, quickly power off and/  
or disconnect the power cable of the home  
network router or cable modem. Then power on  
and/or connect the power cable again.  
y
The use of aRoutermay not be allowed or its  
usage may be limited depending on the policies  
and restrictions of your ISP. For details, contact  
your ISP directly.  
y
y
Depending on the internet service provider (ISP),  
the number of devices that can receive internet  
service may be limited by the applicable terms  
of service. For details, contact your ISP.  
y
y
2
The wireless network operate at 2.4 GHz  
radio frequencies that are also used by other  
household devices such as cordless telephone,  
Bluetooth® devices, microwave oven, and can be  
affected by interference from them.  
Our company is not responsible for any  
malfunction of the player and/or the internet  
connection feature due to communication  
errors/malfunctions associated with your  
broadband internet connection, or other  
connected equipment.  
Turn off all unused network equipment in  
your local home network. Some devices may  
generate network traffic.  
y
The features of BD-ROM discs made available  
through the Internet Connection feature are not  
created or provided by our company, and our  
company is not responsible for their functionality  
or continued availability. Some disc related  
material available by the Internet Connection  
may not be compatible with this player. If you  
have questions about such content, please  
contact the producer of the disc.  
y
For better reception, place the player from the  
access point as close as possible.  
y
y
In some instances, placing the access point or  
wireless router at least 0.45 m (1.5 ft.) above the  
floor may improve the reception.  
The reception quality over wireless depends on  
many factors such as type of the access point,  
distance between the player and access point,  
and the location of the player.  
y
y
Some internet content may require a higher  
bandwidth connection.  
y
y
Set your access point or wireless router to  
Infrastructure mode. Ad-hoc mode is not  
supported.  
Even if the player is properly connected and  
configured, some internet content may not  
operate properly because of internet congestion,  
the quality or bandwidth of your internet service,  
or problems at the provider of the content.  
Some internet connection operations may not  
be possible due to certain restrictions set by the  
Internet service provider (ISP) supplying your  
broadband Internet connection.  
y
Any fees charged by an ISP including, without  
limitation, connection charges are your  
responsibility.  
y
y
A 10 Base-T or 100 Base-TX LAN port is required  
for wired connection to this player. If your  
internet service does not allow for such a  
connection, you will not be able to connect the  
player.  
You must use a Router to use xDSL service.  
y
y
A DSL modem is required to use DSL service and  
a cable modem is required to use cable modem  
service. Depending on the access method of and  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24 System Setting  
5. Use W/S/A/Dto select the IP mode  
between [Dynamic] and [Static].  
Initial Setup  
When you turn on the unit for the first time, the  
initial setup wizard appears on the screen. Set the  
display language and network settings on the initial  
setup wizard.  
Normally, select [Dynamic] to allocate an IP  
address automatically.  
1. Press 1(POWER).  
The initial setup wizard appears on the screen.  
2. Use W/S/A/Dto select a display language  
and press ENTER (b).  
6. Select [Next] and press ENTER (b) to apply  
network settings.  
3
3. Read and prepare the preparations for the  
network settings and then press ENTER (b)  
while [Start] is highlighted.  
Network connection status is displayed on the  
screen.  
For details on network settings, refer to  
“Connecting to Your Home Networkon page  
If wired network is connected, the network  
connection setting will automatically be  
finished.  
4. All available networks are displayed on the  
screen. Use W/Sto select [Wired Network]  
or desired SSID of wireless network and press  
ENTER (b).  
If you have security on your access point, you  
need to input the security code as necessary.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Setting 25  
7. Select [Next] and press ENTER (b).  
Settings  
8. Press ENTER (b) to verify the test tone signals of  
the speakers.  
Adjust the setup settings  
You can change the settings of the player in the  
[Settings] menu.  
1. Press HOME ( ).  
After verifying the test tone signals, press ENTER  
(b) while [Stop] is highlighted.  
Select [Next] and press ENTER (b).  
9. You can listen to TV sound through HTS Speaker  
automatically when TV is turned on. TV and HTS  
should be connected with optical cable. Press  
Wto move and press A/Dto select [On] or  
[Off]. Select [Next] and press ENTER (b).  
3
2. Use A/Dto select the [Settings] and press  
ENTER (b). The [Settings] menu appears.  
3. Use W/Sto select the first setup option, and  
10. Check all the settings that you have set in the  
previous steps.  
press Dto move to the second level.  
4. Use W/Sto select a second setup option, and  
Press ENTER (b) while [Finish] is highlighted  
to finish the initial setup settings. If there is any  
settings to be changed, use W/S/A/Dto  
select 1 and press ENTER (b).  
press ENTER (b) to move to the third level.  
5. Use W/Sto select a desired setting, and press  
ENTER (b) to confirm your selection.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
26 System Setting  
Smart Service Setting  
[NETWORK] menu  
The [NETWORK] settings are needed to use the  
software update, BD-Live and online content  
services.  
[Country Setting]  
Select your area for displaying proper online  
content service.  
Connection Setting  
[Initialize]  
If your home network environment is ready to  
connect, the unit needs to be set up via wireless  
or wired connection for network communication.  
(SeeConnecting to Your Home Networkon page  
[Deactivate Netflix]  
Deactivates your player. To activate the  
Netflix again, contact to the service provider.  
y
[Netflix ESN]  
y
Display its unique Netflix ESN (Electronic  
Serial Number) that allows you to use the  
Netflix streaming.  
Connection Status  
If you want to check the network status on this  
player, select the [Connection Status] options and  
press ENTER (b) to check whether a connection  
to the network and the internet have been  
established.  
[Deactivate Vudu]  
Deactivates your player. To activate the Vudu  
again, contact to the service provider.  
y
3
Device Name  
You can make a network name using virtual  
keyboard. This player will be recognised by the  
name you are entering on your home network.  
BD-LIVE connection  
You can restrict Internet access when BD-Live  
functions are used.  
Wi-Fi Direct  
[Permitted]  
This player is a Wi-Fi Direct™ certified device. Wi-  
Fi Direct™ is the technology that enables devices  
to connect each other without connecting to an  
Access point or a router. Press ENTER (b) to display  
the Wi-Fi Direct menu. Refer to page 49 for the  
device connection.  
Internet access is permitted for all BD-Live  
content.  
[Partially permitted]  
Internet access is permitted only for BD-Live  
content which have content owner certificates.  
Internet access and AACS Online functions are  
prohibited for all BD-Live content without a  
certificate.  
Network Play  
This function allows you to control the playback  
of media streamed from DLNA media server by a  
DLNA certified smartphone. Most DLNA certified  
smartphone has a function to control the playback  
media on your home network. Set this option to  
[On] for allowing your smartphone to control this  
unit. Refer to instructions of your DLNA certified  
smartphone or the application for more detailed  
information.  
[Prohibited]  
Internet access is prohibited for all BD-Live  
content.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
System Setting 27  
Note  
,
Resolution  
Sets the output resolution of the HDMI video signal.  
Refer to page 16 for details about the resolution  
setting.  
This unit and the DLNA Certified  
Smartphone must be connected to the  
same network.  
y
y
To use the [Network Play] function using a  
DLNA certified smartphone, press HOME  
[Auto]  
(
) to display the home menu before  
If the HDMI OUT jack is connected to  
TVs providing display information (EDID),  
automatically selects the resolution best suited  
to the connected TV.  
connecting to this unit.  
While controlling the unit using the  
[Network Play] function, the remote control  
may not work.  
y
y
[480p]  
Available file formats described on page  
67 are not always supported on [Network  
Play] function.  
Outputs 480 lines of progressive video.  
[720p]  
Outputs 720 lines of progressive video.  
3
[1080i]  
[DISPLAY] menu  
Outputs 1080 lines of interlaced video.  
[1080p]  
TV Aspect Ratio  
Select a TV aspect ratio option according to your TV  
type.  
Outputs 1080 lines of progressive video.  
1080p Display Mode  
[4:3 Letter Box]  
When the resolution is set to 1080p, select  
[24 Hz] for smooth presentation of film material  
(1080p/24 Hz) with a HDMI-equipped display  
compatible with 1080p/24 Hz input.  
Select when a standard 4:3 TV is connected.  
Displays theatrical images with masking bars  
above and below the picture.  
[4:3 Pan Scan]  
Note  
,
Select when a standard 4:3 TV is connected.  
Displays pictures cropped to fill your TV screen.  
Both sides of the picture are cut off.  
When you select [24 Hz], you may  
experience some picture disturbance when  
the video switches video and film material.  
In this case, select [60 Hz].  
y
y
[16:9 Original]  
Even when [1080p Display Mode] is set to  
[24 Hz], if your TV is not compatible with  
1080p/24 Hz, the actual frame frequency of  
the video output will be 60 Hz to match the  
video source format.  
Select when a 16:9 wide TV is connected. The  
4:3 picture is displayed with an original 4:3  
aspect ratio, with black bars appearing at the  
left and right sides.  
[16:9 Full]  
Select when a 16:9 wide TV is connected. The  
4:3 picture is adjusted horizontally (in a linear  
proportion) to fill the entire screen.  
Note  
,
You cannot select [4:3 Letter Box] and  
[4:3 Pan Scan] option when the resolution is  
set to higher than 720p.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
28 System Setting  
HDMI Color Setting  
Select the type of output from the HDMI OUT jack.  
For this setting, please refer to the manuals of your  
display device.  
[LANGUAGE] menu  
Display Menu  
Select a language for the [Settings] menu and on-  
screen display.  
[YCbCr]  
Select when connecting to a HDMI display  
device.  
Disc Menu / Disc Audio /  
Disc Subtitle  
Select the language you prefer for the audio track  
(disc audio), subtitles, and the disc menu.  
[RGB]  
Select when connecting to a DVI display  
device.  
[Original]  
Refers to the original language in which the  
disc was recorded.  
3D Mode  
Select the type of output mode for Blu-ray 3D disc  
playback.  
3
[Other]  
Press ENTER (b) to select another language.  
Use number buttons then press ENTER (b)  
to enter the corresponding 4-digit number  
according to the language code list on page  
[Off]  
Blu-ray 3D disc playback will output as 2D  
mode like a normal BD-ROM disc playback.  
[On]  
[Off] (Disc Subtitle only)  
Blu-ray 3D disc playback will output as 3D  
mode.  
Turn off Subtitle.  
Note  
Home Menu Guide  
This function allows you to display or delete the  
guide bubble on the [HOME] menu. Set this option  
to [On] for displaying guide.  
,
Depending on the disc, your language setting  
may not work.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
System Setting 29  
DRC (Dynamic Range Control)  
This function allows you to listen to a movie at a  
lower volume without losing clarity of sound.  
[AUDIO] menu  
Each disc has a variety of audio output options. Set  
the player’s Audio options according to the type of  
audio system you use.  
[Off]  
Note  
Turns off this function.  
,
Since many factors affect the type of audio  
output, seeAudio Output Specificationson  
page 70 for details.  
[On]  
Compress the dynamic range of the Dolby  
Digital, Dolby Digital Plus or Dolby TrueHD  
audio output.  
Digital Output  
[Auto]  
[PCM Stereo] (HDMI only)  
The dynamic range of the Dolby TrueHD audio  
output is specified by itself.  
And the dynamic range of the Dolby Digital  
and Dolby Digital Plus are operated as same as  
the [On] mode.  
Select if you connect this unit’s HDMI OUT jack  
to a device with two-channel digital stereo  
decoder.  
3
[PCM Multi-Ch] (HDMI only)  
Note  
Select if you connect this unit’s HDMI OUT jack  
to a device with multi-channel digital decoder.  
,
The DRC setting can be changed only when a  
disc is not inserted or the unit is in complete  
stop mode.  
[DTS Re-Encode] (HDMI only)  
Select if you connect this unit’s HDMI OUT jack  
to a device with DTS decoder.  
[Bit Stream] (HDMI only)  
Select if you connect this unit’s HDMI OUT jack  
to a device with LPCM, Dolby Digital, Dolby  
Digital Plus, Dolby TrueHD, DTS and DTS-HD  
decoder.  
Note  
,
When [Digital Output] option is set to [PCM  
Multi-Ch], the audio may output as PCM  
Stereo if the PCM Multi-Ch information is  
not detected from HDMI device with EDID.  
y
y
If the [Digital Output] option is set to [DTS  
Re-Encode], the DTS Re-Encode audio is  
outputted for BD-ROM discs with secondary  
audio and the original audio is outputted for  
the other discs (like [Bit Stream]).  
This setting is not available on the input  
signal from an external device.  
y
Download from Www.Somanuals.com. All Manuals Search And Download.  
30 System Setting  
Speaker Setup  
To obtain the best possible sound, use the speaker  
setup display to specify the volume of the speakers  
you have connected and their distance from your  
listening position. Use the test to adjust the volume  
of the speakers to the same level.  
3
[Speaker]  
Select a speaker that you want to adjust.  
[Volume]  
Adjust the output level of each speaker.  
[Distance]  
Adjust the distance between each speaker and  
the listening position.  
[Test/ Stop test tone]  
The speakers will emit a test tone.  
[OK]  
Confirms the setting.  
HD AV Sync  
Sometimes Digital TV encounters a delay between  
picture and sound. If this happens you can  
compensate by setting a delay on the sound so  
that it effectivelywaitsfor the picture to arrive:  
this is called HD AV Sync. Use ADto scroll up and  
down through the delay amount, which you can  
set at anything between 0 and 300 ms.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Setting 31  
DVD Rating  
Blocks playback of rated DVD based on their  
content. (Not all discs are rated.)  
[LOCK] menu  
The [LOCK] settings affect only Blu-ray Disc and  
DVD playback.  
To access the any features in [LOCK] settings, you  
must enter the 4-digit security code you have  
created.  
If you have not entered a password yet, you are  
prompted to do so. Enter a 4-digit password twice,  
and press ENTER (b) to create a new password.  
[Rating 1-8]  
Rating one (1) has the most restrictions and  
rating eight (8) is the least restrictive.  
[Unlock]  
If you select [Unlock], parental control is not  
active and the disc plays in full.  
Password  
You can create or change the password.  
Blu-ray Disc Rating  
Set an age limit of BD-ROM play. Use number  
[None]  
buttons to input an age limit for BD-ROM viewing.  
3
Enter a 4-digit password twice, and press  
ENTER (b) to create a new password.  
[255]  
[Change]  
All BD-ROM can be played.  
Enter the current password and press ENTER  
(b). Enter a 4-digit password twice, and press  
ENTER (b) to create a new password.  
[0-254]  
Prohibits play of BD-ROM with corresponding  
ratings recorded on them.  
If you forget your password  
Note  
If you forget your password, you can clear it using  
the following steps:  
,
The [Blu-ray Disc Rating] will be applied  
only for the Blu-ray disc that containing the  
Advanced Rating Control.  
y
y
1. Remove any disc that might be in the player.  
2. Select [Password] option in the [Settings] menu.  
For the region using MPAA rating level, refer  
to the table below as an example.  
3. Use Number buttons to enter210499. The  
password is cleared.  
Blu-ray Disc Rating  
MPAA Rating  
Note  
,
0
8
G
PG  
If you make a mistake before pressing ENTER  
(b), press CLEAR. Then input the correct  
password.  
13  
17  
18  
255  
PG-13  
R
NC-17  
Not restricted  
Area Code  
Enter the code of the area whose standards were  
used to rate the DVD video disc, based on the list  
Download from Www.Somanuals.com. All Manuals Search And Download.  
32 System Setting  
TV Sound Connecting  
You can listen to TV sound through this unit’s  
speaker automatically when TV is turned on. TV and  
this unit should be connected with optical cable.  
[OTHERS] menu  
Auto Power Off  
The screen saver appears when you leave the  
player in Stop mode for about 5 minutes. If you  
set this option to [On], the unit automatically  
turns off within 20 minutes since the Screen Saver  
is displayed. Set this option to [O] to leave the  
screen saver until the unit is operated by the user.  
Note  
,
When you set [Auto Power O] function in  
setting menu on, this unit will be off itself to  
save electronic consumption in the case main  
unit is not connected to external device and is  
not used for 25 minutes.  
Press Wto move and press A/Dto select [On] or  
[Off]. Select [Next] and press ENTER (b).  
Initialize  
3
So does this unit after six hours since Main unit  
has been connected to other device using  
analog input.  
[Factory Set]  
You can reset the player to its original factory  
settings.  
[Blu-ray Storage Clear]  
Initializes the BD-Live content from the  
connected USB storage.  
Note  
,
If you reset the player to its original factory  
settings using [Factory Set] option, you have to  
set all the activation for the online services and  
network settings again.  
Software  
[Information]  
Displays the current software version.  
[Update]  
You can update the software by connecting  
the unit directly to the software update server  
SIMPLINK/ARC  
-
The SIMPLINK function allows you to control this  
unit with LG TV’s remote control.  
-
The ARC function enables an HDMI capable TV  
to send the audio stream to HDMI OUT of this  
player.  
Set this option to [On] for activating [SIMPLINK /  
ARC] function. (page 15)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
System Setting 33  
Setting the [User EQ]  
Sound Effect  
You can select a suitable sound mode. Press SOUND  
EFFECT repeatedly until the desired mode appears  
on the front panel display or the TV screen. The  
displayed items for the equalizer maybe different  
depending on sound sources and effects.  
[Natural Plus]: You can enjoy the natural sound  
effect same as 5.1 channel.  
1. Use W/Sto select the desired frequency.  
[Natural]: You can enjoy comfortable and natural  
sound.  
2. Use A/Dto select the desired level.  
[Bypass]: Software with multichannel surround  
audio signals is played according to the way it was  
recorded.  
Select [Cancel] option then press ENTER (b) to  
cancel the setting.  
Select [Reset] option then press ENTER (b) to reset  
the all adjustments.  
3
[Bass Blast]: Reinforce the bass sound effect from  
front left and right speaker and subwoofer.  
[Loudness]: Improves bass and treble sound.  
[User EQ]: You can adjust the sound by raising or  
lowering the level of specific frequency.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
34 Operating  
Using the Smart Share  
You can play video, photo and audio content on  
the unit by inserting a disc, connecting an USB  
device or using home network (DLNA).  
Home Menu Display  
Using [HOME] menu  
The home menu appears when you press HOME  
1. Press HOME ( ) to display the home menu.  
2. Select [Smart Share] and press ENTER (b).  
(
). Use W/S/A/Dto select a category and  
press ENTER (b).  
Note  
,
4
Depending on the region, the [LG Smart  
World], [My Apps] service and [Search]  
function may not be available.  
a
b
c
Displays all linked devices.  
Displays video, photo or audio content.  
Displays the file or folder on linked device.  
a
b
[Smart Share] - Displays Smart Share menu.  
[Premium] - Displays the Premium home  
[LG Smart World] - Displays LG Apps titles  
c
d
[My Apps] - Displays the [My Apps] screen.  
e
f
[Input] - Changes input mode.  
[Settings] - Adjusts the system settings.  
[Search] - Searches for desired LG Apps and  
other content.  
g
h
[Log In] - Displays login menu.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating 35  
Playing Blu-ray 3D disc  
Playing the Linked  
Devices  
e
This player can play the Blu-ray 3D disc which  
contains separate views for the left and right eyes.  
Playing a disc  
Preparation  
erot  
In order to playback Blu-ray 3D title in  
stereoscopic 3D mode, you need to:  
1. Press B(OPEN/CLOSE), and place a disc on the  
disc tray.  
Check your TV is 3D capable and has HDMI  
input(s).  
y
y
y
y
2. Press B(OPEN/CLOSE) to close the disc tray.  
For the most Audio CD, BD-ROM and  
DVD-ROM discs, playback starts automatically.  
Wear 3D glasses to enjoy the 3D experience  
if it is necessary.  
3. Press HOME ( ) and then select [Smart Share].  
4. Select disc icon.  
Check whether the BD-ROM title is the Blu-  
ray 3D disc or not.  
Connect an HDMI cable (Type A, High  
Speed HDMI™ Cable) between the player’s  
HDMI output and TV’s HDMI input.  
Note  
,
Playback functions described in this manual  
are not always available in every files and  
media. Some functions can be restricted  
depending on many factors.  
y
y
4
1. Press HOME ( ), and set the [3D Mode] option  
on the [Settings] menu to [On] (page 28).  
Depending on the BD-ROM titles, an USB  
device connection may be needed for the  
proper playback.  
2. Press B(OPEN/CLOSE), and place a disc on the  
disc tray.  
3. Press B(OPEN/CLOSE) to close the disc tray.  
Unfinalized DVD-VR format discs may not  
be played in this player.  
y
y
The playback starts automatically.  
4. Refer to the owner’s manual of your 3D-ready  
TV for the further instruction.  
Some DVD-VR discs are made with CPRM  
data by DVD RECORDER. This unit cannot  
support these kinds of discs.  
You may need to adjust the display settings and  
focus on your TV’s setting for the improved 3D  
effect.  
Caution  
Watching a 3D content for a long period  
time may cause dizziness or tiredness.  
>
y
y
It is not recommended to watch a video  
in 3D mode for infirm, child and pregnant  
woman.  
If you are experiencing headache, tiredness  
or dizziness while viewing content in 3D,  
it is strongly recommended to stop the  
playback and rest until you feel normal.  
y
Download from Www.Somanuals.com. All Manuals Search And Download.  
36 Operating  
Notes on USB device  
Playing a file on disc/USB  
device  
yui  
This player can play video, audio and photo files  
contained in the disc or USB device.  
This player supports USB flash drive/external  
HDD formatted in FAT32 and NTFS when  
accessing files (music, photo, movie). However,  
for BD-Live, use the USB flash drive / external  
HDD formatted in FAT32.  
y
This unit can support up to 4 partitions of the  
USB device.  
y
y
y
1. Insert a data disc on the tray or connect an USB  
device.  
Do not extract the USB device during operation  
(play, etc.).  
An USB device which requires additional  
program installation when you have connected  
it to a computer, is not supported.  
USB device: USB device that supports USB1.1  
and USB2.0.  
y
y
Video, audio and photo files can be played. For  
details of operations on each file, refer to relevant  
pages.  
When you connect the USB device on the HOME  
menu, the player plays an audio file contained in  
the USB storage device automatically. If the USB  
storage device is containing various types of files, a  
menu for the file type selection will appear.  
Regular back up is recommended to prevent  
data loss.  
y
y
4
If you use an USB extension cable, USB HUB or  
USB Multi-reader, the USB device may not be  
recognized.  
File loading may takes few minutes depending on  
the number of content stored in the USB storage  
device. Press ENTER (b) while [Cancel] is selected  
to stop loading.  
Some USB device may not work with this unit.  
y
y
Digital camera and mobile phone are not  
supported.  
2. Press HOME ( ).  
USB Port of the unit cannot be connected to PC.  
The unit cannot be used as a storage device.  
y
3. Select [Smart Share] and press ENTER (b).  
4. Select the desired linked device in the category.  
5. Select [Movie], [Photo] or [Music].  
6. Select a file using W/S/A/D, and press  
d(PLAY) or ENTER (b) to play the file.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating 37  
Note  
,
Playing a file on a network  
server  
yui  
This player can play video, audio and photo files  
located in a DLNA server through your home  
network.  
The file requirements are described on page  
y
y
Thumbnails of files with unsupported  
format will be displayed, but cannot be  
played on this unit.  
The subtitle file name and video file name  
have to be the same and located at the  
same folder.  
y
1. Check the network connection and settings  
The playback and operating quality may be  
affected by your home network condition.  
y
y
y
2. Press HOME ( ).  
3. Select [Smart Share] and press ENTER (b).  
You may experience connection problems  
depending on your server’s environment.  
To set your PC as a DLNA server, install the  
supplied Nero MediaHome 4 on your PC.  
4. Select a DLNA media server in the category.  
5. Select [Movie], [Photo] or [Music].  
4
6. Select a file using W/S/A/D, and press  
d(PLAY) or ENTER (b) to play the file.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
38 Operating  
MAC OS X  
1. Start up your computer, and insert the supplied  
CD-ROM disc into your computer’s CD-ROM  
drive.  
Using Home Network  
Server for PC  
2. Browse the CD-ROM drive and open the  
“MediaHome_4_Essentials_MACfolder.  
DLNA stands for Digital Living Network Alliance,  
which allows users to access video, photo and  
audio files stored in server and enjoy them on TV  
via home networking.  
3. Double-click theNero MediaHome.dmgimage  
file. The Nero MediaHome window is opened.  
Before connecting to PC to play a file , Nero  
MediaHome 4 Essentials program should be  
installed on your PC.  
4. In the Nero MediaHome window, drag the Nero  
MediaHome icon either to the Applications  
folder within the window or to any other  
desired location.  
Installing Nero MediaHome 4  
Essentials  
5. You can now start the application by double-  
clicking the Nero MediaHome icon in the  
location you dragged it to.  
Windows  
Sharing files and folders  
On your computer, you must share the folder  
containing video, audio and/or photo content to  
play them on this unit.  
Start up your computer, and insert the supplied CD-  
ROM disc into your computer’s CD-ROM drive. An  
installation wizard will walk you through the quick  
and uncomplicated installation process. To install  
Nero MediaHome 4 Essentials, proceed as follows:  
4
This parts explains the procedure for selecting the  
shared folders on your computer.  
1. Close all Microsoft Windows programs and exit  
any anti-virus software that may be running.  
1. Double-click theNero MediaHome 4 Essentials”  
icon.  
2. Insert the supplied CD-ROM disc into your  
computer’s CD-ROM drive.  
2. Click [Network] icon on the left and define your  
network name in the [Network name] field. The  
Network name you enter will be recognized by  
your player.  
3. Click [Nero MediaHome 4 Essentials].  
4. Click [Run] to start installation.  
5. Click [Nero MediaHome 4 Essentials]. The  
installation is prepared and the installation  
wizard appears.  
3. Click [Shares] icon on the left.  
4. Click [Local Folders] tab on the [Shares] screen.  
6. Click the [Next] button to display the serial  
number input screen. Click [Next] to go to the  
next step.  
5. Click [Add] icon to open the [Browse Folder]  
window.  
6. Select the folder containing the files you want  
to share. The selected folder is added to the list  
of shared folders.  
7. If you accept all conditions, click [I accept  
the License Conditions] check box and click  
[Next]. Installation is not possible without this  
agreement.  
7. Click [Start Server] icon to start the server.  
8. Click [Typical] and click [Next]. The installation  
process is started.  
Note  
,
If the shared folders or files are not displayed  
on the player, click the folder on the [Local  
Folders] tab and click [Rescan Folder] at the  
[More] button.  
y
y
9. If you want to take part in the anonymous  
collection of data, select the check box and click  
the [Next] button.  
10. Click the [Exit] button to complete the  
installation.  
and software tools.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operating 39  
About Nero MediaHome 4  
Essentials  
Nero MediaHome 4 Essentials is a software for  
sharing video, audio and photo files stored on your  
computer to this unit as a DLNA-compatible digital  
media server.  
System requirements  
Windows PC  
Windows® XP (Service Pack 2 or higher), Windows  
Vista® (no Service Pack required), Windows® 7  
(no Service Pack required), Windows® XP Media  
Center Edition 2005 (Service Pack 2 or higher),  
Windows Server® 2003  
y
Note  
,
The Nero MediaHome 4 Essentials CD-  
ROM is designed for PCs and should not  
be inserted in this player or in any product  
other than a PC.  
y
y
y
y
Windows Vista® 64-bit edition (application runs  
in 32-bit mode)  
y
y
y
Windows® 7 64-bit edition (application runs in  
32-bit mode)  
The supplied Nero MediaHome 4 Essentials  
CD-ROM is a customized software edition  
only for sharing files and folders to this  
player.  
Hard drive space: 200 MB hard drive space for a  
typical installation of Nero MediaHome stand-  
alone  
1.2 GHz Intel® Pentium® III or AMD  
Sempron™ 2200+ processors  
y
The supplied Nero MediaHome 4 Essentials  
software does not support following  
functions: Transcoding, Remote UI, TV  
control, Internet services and Apple iTunes.  
Memory: 256 MB RAM  
y
y
Graphics card with at least 32 MB video memory,  
minimum resolution of 800 x 600 pixels, and 16-  
bit color settings  
4
The supplied Nero MediaHome 4 Essentials  
software can be downloaded at  
Windows® Internet Explorer® 6.0 or higher  
DirectX® 9.0c revision 30 (August 2006) or higher  
Network environment: 100 Mb Ethernet, WLAN  
y
y
y
-
download.php?id=nmhlgewin  
-
download.php?id=nmhlgemac  
Macintosh  
This manual explains operations with  
the English version of Nero MediaHome  
4 Essentials as examples. Follow the  
explanation referring to the actual  
operations of your language version.  
y
Mac OS X 10.5 (Leopard) or 10.6 (Snow Leopard)  
y
y
y
Macintosh computer with an Intel x86 processor  
Hard drive space: 200 MB hard drive space for a  
typical installation of Nero MediaHome stand-  
alone  
Memory: 256 MB RAM  
y
Download from Www.Somanuals.com. All Manuals Search And Download.  
40 Operating  
Basic operations for photo  
content  
General Playback  
To play a slide show  
Press d(PLAY) to start slide show.  
Basic operations for video and  
audio content  
To stop a slide show  
Press Z(STOP) while slide show.  
To stop playback  
Press Z(STOP) during playback.  
To pause a slide show  
Press M(PAUSE) while slide show.  
Press d(PLAY) to re-start the slide show.  
To pause playback  
Press M(PAUSE) during playback.  
Press d(PLAY) to resume playback.  
To skip to the next/previous photo  
While viewing a photo in full screen, press Aor D  
to go to the previous or next photo.  
To play frame-by-frame (Video)  
Press M(PAUSE) during video playback.  
Press M(PAUSE) repeatedly to play Frame-by-Frame  
playback.  
Using the disc menu  
ero  
To scan forward or backward  
Press cor vto play fast forward or fast reverse  
during playback.  
To display the disc menu  
You can change the various playback speeds by  
pressing cor vrepeatedly.  
The menu screen may be displayed first after  
loading a disc which contains a menu. If you want  
to display the disc menu during playback, press  
DISC MENU.  
To slow down the playing speed  
While the playback is paused, press vrepeatedly  
to play various speeds of slow motion.  
Use W/S/A/Dbuttons to navigate through  
menu items.  
To skip to the next/previous  
chapter/track/file  
During playback, press Cor Vto go to the  
next chapter/track/file or to return to the beginning  
of the current chapter/track/file.  
To display the Pop-up menu  
Some BD-ROM discs contain Pop-up menu that  
appears during playback.  
Press TITLE/POPUP during playback, and use W/  
S/A/Dbuttons to navigate through menu  
items.  
Press Ctwice briefly to step back to the previous  
chapter/track/file.  
In the file list menu of a server, there may have  
many types of content in a folder together. In this  
case, press Cor Vto go to the previous or  
next content with same type.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating 41  
Resume playback  
Last scene memory  
eroyt  
u
er  
This unit memorizes the last scene from the last disc  
that is viewed. The last scene remains in memory  
even if you remove the disc from the unit or switch  
off the unit. If you load a disc that has the scene  
memorized, the scene is automatically recalled.  
The unit records the point where you pressed the  
Z(STOP) depending on the disc.  
IfMZ(Resume Stop)appears on the screen briefly,  
press d(PLAY) to resume playback (from the scene  
point).  
If you press Z(STOP) twice or unload the disc,  
Z(Complete Stop)appears on the screen. The unit  
will clear the stopped point.  
Note  
,
Last Scene Memory function for a previous  
disc is erased once a different disc is played.  
y
y
y
y
This function may not work depending on  
the disc.  
Note  
,
The resume point may be cleared when a  
button is pressed (for example; 1(POWER),  
B(OPEN/CLOSE), etc).  
y
On BD-ROM discs with BD-J, the last scene  
memory function does not work.  
This unit does not memorize settings of  
a disc if you switch off the unit before  
commencing to play it.  
On BD-ROM discs with BD-J, the resume  
playback function does not work.  
y
y
If you press Z(STOP) once during BD-ROM  
interactive title playback, the unit will be in  
Complete Stop mode.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
42 Operating  
Displaying content information  
on-screen  
eroy  
1. During playback, press INFO/MENU (m).  
On-Screen Display  
You can display and adjust various information and  
settings about the content.  
2. Select an [Option] using A/D, and press  
To control video playback  
ENTER (b).  
eroy  
You can control playback and set options while  
watching videos.  
During playback, press INFO/MENU (m).  
4
a Progress bar - Displays the current position  
and total playing time.  
a Title – Current title number/total number of  
b [Disc Menu] - Accesses menu on a disc.  
titles  
c [Title/Popup] - Displays the DVD title menu  
b Chapter – Current chapter number/total  
or BD-ROM’s pop-up menu, if available.  
number of chapters  
d [Option] - Displays playback information.  
c Time – Elapsed playing time/total playback  
e [Music ID] - When connected to the network,  
can provide information about the current  
song during video playback.  
time  
d Audio – Selected audio language or channel  
e Subtitle – Selected subtitle.  
f [Repeat] - Repeats a desired section or  
f Angle – Selected angle/total number of  
angles  
g [3D] - Adjusts the 3D setting. (page 48)  
g TV Aspect Ratio – Selected TV aspect ratio  
h Picture Mode – Selected picture mode  
i Movie Information – Select this option and  
press ENTER (b) to display movie information  
from Gracenote Media Database (BD-ROM/  
DVD only).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating 43  
Note  
,
Setting the slide show option  
You can use various options during viewing a  
photo in full screen.  
If no button is pressed for a few seconds,  
the on-screen display disappears.  
y
y
y
y
A title number cannot be selected on some  
discs.  
1. While viewing pictures, press INFO/MENU (m).  
2. Select an [Option] using A/D, and press  
Available items may differ depending on  
discs or titles.  
ENTER (b)  
If an interactive Blu-ray Disc is playing back,  
some setting information is displayed on  
the screen but prohibited to be changed.  
To use the [Movie Information] option, the  
player must be connected to the broadband  
internet for accessing the Gracenote Media  
Database.  
y
y
LG is a license of Gracenote technology and  
is not responsible or liable for information  
from the Gracenote Media Database  
a [Speed] - Use A/Dto select a delaying  
speed between photos in a slide show.  
4
b [Effect] - Use A/Dto select a transition  
To control photo view  
Controls playback and sets options while viewing  
pictures in full screen.  
effect between photos in a slide show.  
c [Music Select] – Select the background music  
for the slide show (page 48).  
You can control playback and set options while  
viewing pictures in full screen.  
While viewing pictures, press INFO/MENU (m).  
a [Slideshow] - Starts or pause slide show.  
b [Music] - Select the background music for the  
c [Option] - Displays slide show options.  
d [Rotate] - Rotates the photo clockwise.  
e [Zoom] - Displays the [Zoom] menu.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
44 Operating  
Repeating a specific portion  
eroty  
This player can repeat a portion you have selected.  
Advanced Playback  
Repeat playback  
1. During playback, press REPEAT (h) to select  
[A-B] and press ENTER (b) at the beginning of  
the portion you wish to repeat.  
erotu  
y
2. Press ENTER (b) at the end of the portion. Your  
Blu-ray Disc / DVD / Video files  
selected portion will be repeated continually.  
During playback, press REPEAT (h) to select a  
3. To return to normal playback, press CLEAR.  
desired repeat mode.  
Note  
,
A-B – Selected portion will be repeated continually.  
You cannot select a portion less than 3  
seconds.  
y
y
Chapter – The current chapter will be played back  
repeatedly.  
This function may not work on some disc or  
title.  
Title – The current title will be played back  
repeatedly.  
All – All the titles or files will be played back  
repeatedly.  
Playing from selected time  
eroy  
1. During playback, press INFO/MENU (m).  
Off – Returns to normal playback.  
To return to normal playback, press CLEAR.  
Audio CDs/Audio files  
4
2. Select an [Option] using A/D, and press  
During playback, press REPEAT (h) repeatedly to  
select a desired repeat mode.  
ENTER (b)  
3. Select the [Time] option and then input the  
required start time in hours, minutes, and  
seconds from left to right.  
– Selected portion will be repeated continually.  
(Audio CD only)  
Track– The current track or file will be played  
back repeatedly.  
For example, to find a scene at 2 hours, 10  
minutes, and 20 seconds, enter21020.  
All – All the tracks or files will be played back  
repeatedly.  
Press A/Dto skip the playback 60 seconds  
forward or backward.  
All – All the tracks or files will be played  
back repeatedly in random order.  
4. Press ENTER (b) to start playback from selected  
time.  
– The tracks or files will be played back in  
random order.  
Note  
,
This function may not work on some disc or  
titles.  
y
y
To return to normal playback, press CLEAR.  
This function may not work depending on  
the file type and ability of the DLNA server.  
Note  
,
This function may not work on some disc or  
title.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operating 45  
Selecting a subtitle language  
eroy  
1. During playback, press INFO/MENU (m).  
Watching from a different  
angle  
er  
If the disc contains scenes recorded at different  
camera angles, you can change to a different  
camera angle during playback.  
2. Select an [Option] using A/D, and press  
ENTER (b)  
3. Use W/Sto select the [Subtitle] option.  
1. During playback, press INFO/MENU (m).  
4. Use A/Dto select desired subtitle language.  
2. Select an [Option] using A/D, and press  
By pressing ENTER (b), you can set various  
subtitle options.  
ENTER (b)  
3. Use W/Sto select the [Angle] option.  
4. Use A/Dto select desired angle.  
5. Press BACK (1) to exit the On-Screen display.  
Note  
,
5. Press BACK (1) to exit the On-Screen display.  
Some discs allow you to change subtitle  
selections only via the disc menu. If this is the  
case, press TITLE/POPUP or DISC MENU button  
and choose the appropriate subtitle from the  
selections on the disc menu.  
Changing the TV Aspect Ratio  
eoy  
You can change the TV aspect ratio setting during  
playback.  
4
Hearing a different audio  
eroy  
1. During playback, press INFO/MENU (m).  
1. During playback, press INFO/MENU (m).  
2. Select an [Option] using A/D, and press  
ENTER (b)  
3. Use W/Sto select the [TV Aspect Ratio]  
2. Select an [Option] using A/D, and press  
option.  
ENTER (b)  
4. Use A/Dto select desired option.  
3. Use W/Sto select the [Audio] option.  
5. Press BACK (1) to exit the On-Screen display.  
4. Use A/Dto select desired audio language,  
Note  
audio track or audio channel.  
,
Even if you change the value of the [TV Aspect  
Ratio] option in On-Screen display, the [TV  
Aspect Ratio] option in the [Settings] menu is  
not changed.  
Note  
,
Some discs allow you to change audio  
selections only via the disc menu. In this  
case, press TITLE/POPUP or DISC MENU  
button and choose the appropriate audio  
from the selections on the disc menu.  
y
Immediately after you have switched sound,  
there may be a temporary discrepancy  
between the display and actual sound.  
y
y
On BD-ROM disc, the multi audio format  
(5.1CH or 7.1CH) is displayed with [MultiCH]  
in the on-screen display.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
46 Operating  
Setting the [User setting] option  
1. During playback, press INFO/MENU (m).  
Changing Subtitle Code Page  
y
If the subtitle is displayed in broken letter, you can  
change the subtitle code page to view the subtitle  
file properly.  
2. Select an [Option] using A/D, and press  
ENTER (b)  
4. Use W/Sto select the [Picture Mode] option.  
5. Use A/Dto select the [User setting] option,  
1. During playback, press INFO/MENU (m).  
and press ENTER (b).  
2. Select an [Option] using A/D, and press  
ENTER (b)  
3. Use W/Sto select the [Code Page] option.  
4. Use A/Dto select desired code option.  
6. Use W/S/A/Dto adjust the [Picture Mode]  
options.  
Select [Default] option then press ENTER (b) to  
reset the all video adjustments.  
4
7. Use W/S/A/Dto select the [Close] option,  
and press ENTER (b) to finish setting.  
5. Press BACK (1) to exit the On-Screen display.  
Viewing content information  
Changing the Picture Mode  
eroy  
You can change the [Picture mode] option during  
playback.  
y
The player can display the content information.  
1. Select a file using W/S/A/D.  
2. Press INFO/MENU (m) to display the option  
1. During playback, press INFO/MENU (m).  
menu.  
2. Select an [Option] using A/D, and press  
The file information appears on the screen.  
ENTER (b)  
During video playback, you can display the file  
information by pressing TITLE/POPUP.  
3. Use W/Sto select the [Picture Mode] option.  
4. Use A/Dto select desired option.  
Note  
,
5. Press BACK (1) to exit the On-Screen display.  
The information displayed on the screen  
may not correct comparing actual content  
information.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating 47  
Changing content list view  
Selecting a subtitle file  
yui  
y
On the [Smart Share] menu, you can change the  
content list view.  
If the subtitle file name is different from the video  
file name, you need to select the subtitle file on the  
[Movie] menu before playing the movie.  
Press red (R) colored button repeatedly.  
1. Use W/S/A/Dto select the subtitle file you  
wish to play in the [Movie] menu.  
2. Press ENTER (b).  
Press ENTER (b) again to deselect the subtitle  
file. Selected subtitle file will be displayed when  
you play the video file.  
4
Note  
,
If you press Z(STOP) during playback, the  
y
y
subtitle selection is cancelled.  
This function is not available for playing file  
on a server via home network.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
48 Operating  
Listening to music during slide Setting the [3D] option  
show  
i
y
This function allows you to play 3D content in case  
of file encorded in 3D.  
You can display photo files while listening to audio  
files.  
1. During playback, press INFO/MENU (m).  
2. Select [3D] using A/D, and press ENTER (b)  
3. Use W/S/A/Dto select desired options.  
1. While viewing a photo in full screen, press INFO/  
MENU (m) to display the option menu.  
2. Select an [Option] using A/D, and press  
You can adjust 3D’s depth and distance on the  
[3D Setting] option.  
ENTER (b).  
3. Use W/Sto select [Music Select] option, and  
press ENTER (b) to display the [Music Select]  
menu.  
On [3D Setting], select [Init] option then press  
ENTER (b) to reset the all adjustments.  
4. Use W/Sto select a device, and press ENTER  
(b).  
Available device may differ depending on the  
location of the current photo file.  
Photo location  
Disc, USB  
Available Device  
Disc, USB  
4
DLNA server  
DLNA server  
5. Use W/Sto select a file or a folder you wish to  
play.  
Select gand press ENTER (b) to display the  
upper directory.  
Note  
,
When selecting audio file from a server, folder  
selection is not available. Only file selection is  
available.  
6. Use Dto select [OK], and press ENTER (b) to  
complete music selection.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Operating 49  
To select a server from the device list, files or  
folders must be shared by DLNA server from the  
connected Wi-Fi Direct™ device.  
Advanced Features  
6. Select [Movie], [Photo] or [Music] using W/S/  
Wi-Fi Direct™  
A/D, and press ENTER (b).  
Connecting to a Wi-Fi Direct™  
certified device  
yui  
This player can play movie, music and photo files  
located in a Wi-Fi Direct™ certified device. The Wi-Fi  
Direct™ technology make the player to be directely  
connected to a Wi-Fi Direct™ certified device  
without connecting to a network device such as an  
access point.  
7. Select a file using W/S/A/D, and press  
ENTER (b) to play the file.  
On Wi-Fi Direct™ certified device  
Note  
,
1. Turn on the Wi-Fi Direct™ certified device and  
run its Wi-Fi Direct function.  
For the purpose of the better transmission,  
placing the player from the Wi-Fi Direct™  
certified server as close as possible.  
y
2. Run DLNA application on the device.  
4
This unit can connect only 1 device at a  
time. Multiple connection is not available.  
y
y
On your player  
3. Select [NETWORK] option in the [Settings]  
If you try to connect wireless network while  
a device is connected by Wi-Fi Direct™  
function , Wi-Fi Direct™ connection will be  
force disconnected.  
menu then press ENTER (b).  
4. Select [Wi-Fi Direct] option, and press ENTER  
(b).  
If this player and a Wi-Fi Direct™ device  
are connected to the different local area  
network, Wi-Fi Direct™ connection may not  
available.  
y
If a Wi-Fi Direct™ certified device is not in  
Wi-Fi direct standby mode, this product  
cannot find the device.  
y
y
y
When you connect a Wi-Fi Direct™  
certified device to your player, PIN network  
connection is not supported.  
5. Select a Wi-Fi Direct™ device on the list using  
W/S, and press ENTER (b).  
This product cannot connect to a Wi-Fi  
direct™ device which is in Group Owner  
mode.  
Wi-Fi Direct™ connection will be proceeded.  
follow the procedure on the screen.  
If you want to rescan available Wi-Fi Direct™  
device, Select the [Refresh List] and press ENTER  
(b).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
50 Operating  
Enjoying BD-Live™  
e
BD-ROM supporting BD-Live that has a network  
extension function allows you to enjoy more  
functions such as downloading new movie trailers  
by connecting this unit to the internet.  
LG AV Remote  
You can control this player with your iPhone  
or Android phone via your home network. This  
player and your phone must be connected to your  
wireless network device such as access point. Visit  
“Apple iTunesorGoogle Android Market (Google  
Play Store)for detailed information ofLG AV  
Remote.  
1. Check the network connection and settings  
2. Insert an USB storage device to the USB port on  
the front panel.  
Private Sound Mode  
By downloadingLG AV Remoteapplication on  
your smart phone or tablet, you can connect your  
headsets, and enjoy the sound from your player on  
your smart devices.  
An USB storage device is needed to download  
bonus content.  
3. Press HOME ( ), and set the [BD-LIVE  
connection] option on the [Settings] menu  
This feature transmits video signal to TV through  
HDMI and audio signal to smart phone or tablet  
through Wi-Fi. For more detailed information,  
please refer to the Help menu onLG AV Remote”  
application.  
Depending on a disc, the BD-Live function may  
not be operated if [BD-LIVE connection] option  
is set to [Partially Permitted].  
4
4. Insert a BD-ROM with BD-Live.  
The operations may differ depending on the  
disc. Refer to the manual supplied with the disc.  
Caution  
>
Do not extract the connected USB device  
while content is being downloaded or a Blu-  
ray disc is still in the disc tray. Doing so may  
damage the connected USB device and BD-  
Live features may not operate properly with  
the damaged USB device anymore. If the  
connected USB device seems damaged from  
such an action, you can format the connected  
USB device from the PC and reuse it with this  
player.  
Note  
,
Some BD-Live content may be restrictively  
accessed in some territories by content  
provider’s own decision.  
y
It may take up to several minutes to load  
and start enjoying BD-Live content.  
y
y
For BD-Live, use the USB flash drive /  
external HDD formatted in FAT32 only.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating 51  
Note  
,
Viewing information from  
Gracenote Media Database  
The player can access the Gracenote Media  
Database and load the music information so that  
Track name, Artist Name, Genre and other text  
information can be displayed on the list.  
The player must be connected to the  
broadband internet for accessing the  
Gracenote Media Database.  
y
y
y
y
If the music information is not in the  
Gracenote Media Database, message  
appears on the screen.  
Depending on the cases, it will takes a few  
minutes to load music information from the  
Gracenote Media Database.  
Audio CD  
When you insert an Audio CD, the player starts  
playback automatically and loads the music title  
from the Gracenote Media Database.  
Information may be displayed in broken  
letters, if the language you selected is not  
available on the Gracenote Media Database.  
If there is no music information from the database,  
music titles will not appear on the screen.  
This function is not available for on-line  
content and content in DLNA servers.  
y
y
Music file  
LG is a license of Gracenote technology and  
is not responsible or liable for information  
from the Gracenote Media Database.  
Select a music file using W/S/A/Dand press  
INFO/MENU (m) or MUSIC ID.  
The player accesses to Gracenote Media Database  
for the music information.  
Audio CDs that users made for their only  
private purposes cannot be supported in  
this feature because they are not in the  
Gracenote Media Database.  
y
y
4
Blu-ray Disc/DVD/Movie file  
1. While listening to a music from the movie being  
Supported music file extensions :  
mp3, wma, m4a, wav  
played, press INFO/MENU (m).  
2. Select a [Music ID] using A/D, and press  
ENTER (b).  
The player starts loading the music information  
from the Gracenote Media Database.  
Note  
,
You can also start loading the music  
information directly by pressing MUSIC ID.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
52 Operating  
Note  
,
Audio CD recording  
For recording, use the USB flash drive /  
external HDD formatted in FAT32 only.  
y
y
You can record one desired track or all of the tracks  
in Audio CD to an USB storage device.  
Audio track is recorded to an audio file with  
192 kbps. FM radio and AUX source are  
recorded to an audio file with 128 kbps.  
1. Insert an USB storage device to the USB port on  
the front panel.  
2. Insert an Audio CD into the player.  
The playback starts automatically.  
Audio CD recording times in the table  
above are approximate.  
y
y
3. Press (X) REC button to start [CD Recording].  
Actual recording time for USB storage  
device varies depending on the USB storage  
device’s ability.  
During  
Stop mode  
playback  
Make sure that there is minimum of 50 MB  
free space is needed when recording into  
the USB storage device.  
y
y
y
Recording  
track  
All of the tracks  
4X speed  
playing track  
Recording  
time  
normal  
speed.  
The length of the recording source should  
be longer than 20 seconds for the proper  
recording.  
Recording from FM radio or  
AUX/ PORTABLE source  
You can record from FM radio or AUX/ PORTABLE  
source to an USB storage device.  
Do not turn off this player or extract the  
connected USB storage device during the  
recording.  
4
Caution  
The recording or copying features on this  
player are provided for your personal and  
non-commercial use. The making of  
unauthorized copies of copy-protected  
material, including computer programs, files,  
broadcasts and sound recordings, may be an  
infringement of copyrights and constitute a  
criminal offense. This equipment should not be  
used for such purposes. LG expressly disclaims  
any responsibility for illegal distribution or  
use of unauthorized content in commercial  
purpose.  
1. Insert an USB storage device to the USB port on  
the front panel.  
>
2. In FM radio mode, tune to the desired radio  
station (SeeRadio Operationson page 53)  
or in AUX/ PORTABLE mode, start playback from  
the external source.  
3. Press (X) REC button on the remote control.  
-
The recording is saved as a fileEXT_REC”  
folder.  
Be Responsible  
Respect Copyrights  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating 53  
Deleting a saved station  
Radio Operations  
Be sure that the antennas are connected.  
1. Press PRESET (- / +) to select a preset number  
you want to delete.  
2. Press CLEAR, the preset number will blink in the  
display window.  
3. Press CLEAR again, to delete the selected preset  
number.  
Listening to the radio  
1. Press FUNCTION until TUNER (FM) appears in  
the display window. The last received station is  
tuned in.  
Deleting all the saved stations  
2. Press and hold TUNING (-/+) for about two  
seconds until the frequency indication starts to  
change. Scanning stops when the unit tunes in  
a station. Or Press TUNING (-/+) repeatedly.  
Press and hold CLEAR for two seconds.  
“ERASE ALLwill flash up. Press CLEAR again. Then all  
the saved stations are deleted.  
3. Adjust the volume by pressing VOL (+/-).  
Improving poor FM reception  
Press B (blue) (MONO/STEREO) colored button on  
the remote control. This will change the tuner from  
stereo to mono and usually improve the reception.  
Presetting the radio stations  
You can preset 50 stations for FM.  
Before tuning, make sure that you have turned  
down the volume.  
4
1. Press FUNCTION until the TUNER (FM) appears  
in the display window.  
2. Select the desired frequency by using TUNING  
(-/+).  
3. Press ENTER (b) a preset number will flash in  
the display window.  
4. Press PRESET (-/+) to select the preset number  
you want.  
5. Press ENTER (b). The station is stored.  
6. Repeat the steps 2 to 5 to store other stations.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
54 Operating  
Playing the iPod  
You can enjoy the sound with your iPod. For details  
about iPod, refer to the iPod’s User Guide.  
Preparation  
Before connecting the iPod, turn this unit off and  
reduce the volume of this unit to its minimum.  
Press REPEAT (h) to select a desired repeat  
mode :Track (;), All (:), Shuffle All (l:),  
Shuffle (l), Off (No display)  
Note  
Note  
,
,
Use the iPod cable supplied with your iPod.  
If the iPod’s OSD language is selected to  
simple chinese, the power scroll function is not  
operated correctly.  
1. Connect the iPod to the USB port on the front  
panel.  
If you turn this unit on, your iPod is  
automatically turned on and recharging starts.  
Enjoying the iPod IN mode  
When you connect the iPod on the HOME  
menu, the player plays a music automatically.  
You can operate your iPod by using the supplied  
remote control and controls on your iPod.  
2. Select a file using W/S/A/D, and press  
4
1. Connect the iPod to the USB port on the front  
panel.  
ENTER (b) to play the file.  
If you turn this unit on, your iPod is  
automatically turned on and recharging starts.  
Enjoying iPod on the screen  
2. Press FUNCTION to select iPod in mode.  
1. Connect the iPod to the USB port on the front  
panel.  
W/S/A/D Selects an option in the menu.  
2. Press HOME ( ).  
ENTER (b)  
Starts playback the music.  
3. Select [Smart Share] using A/D, and press  
ENTER (b).  
To pause while it is playing. To  
resume playing, press Mor d  
(PLAY) again.  
If a disc is already inserted, select the iPod on  
the menu.  
Mor d(PLAY)  
4. Select a file using W/S/A/D, and press  
(Press and hold)  
c/v  
ENTER (b) to play.  
Fast-forward or rewind a song  
Skip the playback forward or  
backward .  
Power scroll  
C/V  
You can search easily a content by power scroll  
on the screen.  
Select a power scroll using Dand select the  
initial of the desired content.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating 55  
Note  
,
An error messageCHECKorConnected  
y
y
iPod model is not supported.appears when:  
-
your iPod is not available for the function  
to be operated.  
An error messageCHECKorPlease update  
your iPod’s software.appears when:  
-
your iPod has an old software version.  
/Update your iPod software to latest  
version.  
If this unit displays an error message, follow  
the message. An error messageCHECKor  
“Please check your iPod.appears when:  
y
-
the communication between this unit  
and your iPod is failed.  
/Connect & reconnect your iPod in this  
unit.  
-
-
your iPod is not connected firmly.  
this unit recognises your iPod as  
unknown device.  
Your iPod is exceptionally low on power.  
/The battery needs to be charged.  
/If you charge the battery while iPod  
is extremely low in power, it may take  
longer to charge.  
y
4
Compatibility with your iPod may vary  
depending on the type of your iPod.  
y
y
iPod touch, iPhone and iPad have any  
difference in operation other than iPod.  
You may need any additional control to use  
them with this unit. (e.g. “slide to unlock”)  
If you use an application, make a call, or  
send and receive SMS text message, etc. on  
iPod touch, iPhone or iPad, disconnect it  
from to the USB port of this unit and then  
use it.  
y
Depending on your iPod’s software version,  
it may not be possible to control your iPod  
from this unit. We recommend installing the  
latest software version.  
y
y
This unit supports the models as follows.  
- iPad mini  
- iPad nano 4G, 5G, 6G  
- iPod touch 1G, 3G, 4G, 5G, 7G  
- iPhone 3G, 3GS, 4, 4S, 5  
- iPad, iPad2, New iPad, iPad4  
If you have a problem with your iPod, please  
y
Download from Www.Somanuals.com. All Manuals Search And Download.  
56 Operating  
Listening to music stored on  
the Bluetooth devices  
Using Bluetooth  
technology  
Pairing your unit and Bluetooth  
device  
Before you start the pairing procedure, make  
sure the Bluetooth feature is turned on in to your  
Bluetooth device. Refer to your Bluetooth device’s  
user guide. Once a pairing operation is performed,  
it does not need to be performed again.  
About Bluetooth  
Bluetooth® is wireless communication technology  
for short range connection.  
The available range is within 10 meters.  
(The sound may be interrupted when the  
connection interfered by the other electronic wave  
or you connect the bluetooth in the other rooms.)  
Connecting individual devices under  
Bluetooth® wireless technology does not incur any  
charges. A mobile phone with  
Bluetooth® wireless technology can be operated  
via the Cascade if the connection was made via  
Bluetooth® wireless technology.  
Available Devices : Mobile phone, MP3, Laptop,  
PDA (This units be supported the Stereo Headset.)  
1. Select the Bluetooth function by using the  
FUNCTION.  
AppearsBT READYin display window.  
2. Operate the Bluetooth device and perform the  
pairing operation. When searching for this unit  
with the Bluetooth device, a list of the devices  
found may appear in the Bluetooth device  
display depending on the type of Bluetooth  
device.Your unit appears asLG HTS.  
4
3. When this unit successfully paired with your  
Bluetooth device, Bluetooth LED of this unit  
lights up andBTPAIREDappears in the display  
window.  
Bluetooth Profiles  
In order to use Bluetooth wireless technology,  
devices must be able to interpret certain profiles.  
This unit is compatible with following profile.  
Note  
,
A2DP (Advanced Audio Distribution Profile)  
Depending on the Bluetooth device type,  
some device have a different pairing way.  
4. Listen to music.  
To play a music stored on your Bluetooth device,  
refer to your Bluetooth device’s user guide.  
Note  
,
If you change the function of the unit, the  
Bluetooth function is disconnected, operate  
pairing again.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating 57  
Note  
,
The sound may be interrupted when  
the connection interfered by the other  
electronic wave.  
y
You cannot control the Bluetooth device  
with this unit.  
y
y
y
Pairing is limited one Bluetooth device per  
one unit and multi-pairing is not supported.  
Although the distance between your  
Bluetooth and the set is less than 10m, there  
are obstacles between both, your Bluetooth  
device cannot be connected.  
Depending on the type of the device,  
you may not be able to use the Bluetooth  
function.  
y
When not connected the Bluetooth, “BT  
READYappears on the display window.  
y
y
The Electrical malfunction due to devices  
using same frequency such as Medical  
equipment, Microwaves or wireless  
LAN devices, the connection will be  
disconnected.  
4
When someone stands and interrupts  
communication between Bluetooth device  
and the player, the connection will be  
disconnected.  
y
y
If the gotten away of the distance between  
Bluetooth and the unit, the sound quality  
is lower and lower the connection will  
disconnect when the space between the  
Bluetooth and the unit gets out of the  
operating range of Bluetooth.  
The device with Bluetooth wireless  
technology is disconnected, if you turn off  
the main unit or put the device away from  
the main unit more than 10m.  
y
Download from Www.Somanuals.com. All Manuals Search And Download.  
58 Operating  
Using the Premium  
You can use various content services via Internet  
with the Premium feature.  
Using the LG Smart  
World  
You can use the LG application services on  
this player via Internet. You can easily find and  
download various applications from LG Smart  
World.  
1. Check the network connection and settings  
2. Press HOME ( ).  
3. Select the [Premium] using A/D, and press  
1. Check the network connection and settings  
ENTER (b).  
2. Press HOME ( ).  
3. Select the [LG Smart World], and press ENTER  
(b).  
4. Select an online service using W/S/A/D,  
and press ENTER (b).  
Note  
,
4. Select a category using A/D, and press ENTER  
For detailed information of each service,  
contact to the content provider or visit  
support link of the service.  
y
y
4
(b).  
5. Use W/S/A/Dto select an application, and  
press ENTER (b) to display the information.  
The content of Premium services and  
service related information, including user  
interface, is subject to changes. Please refer  
to the web site of each service for most up-  
to-date information.  
6. Press ENTER (b) while [Install] icon is  
highlighted. The application will be installed to  
the player.  
To install an application to the player, user  
needs to sign in. Refer to page 59 for more  
information of signning in.  
Using Premium features with wireless  
network connection may result in improper  
streaming speed by interference from  
household devices that are using radio  
frequencies.  
y
y
7. Press yellow (Y) colored button to display the  
[My Apps] screen.  
8. Select the installed application and press ENTER  
For the first time to access [Premium] or  
[LG Smart World] feature, current country  
setting appears. If you want to change  
the country setting, select [Edit] and press  
ENTER (b).  
(b) to excute it.  
Note  
,
Depending on the region, the [LG Smart  
World], [My Apps] service and [Search]  
function may not be available.  
y
y
To install a paid application, you need to be  
more information.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Operating 59  
Signing in  
Searching online content  
To use the [LG Smart World] feature, you need to  
sign in with your account.  
If you are having difficulties finding specific content  
from online services, you can use the all-in-one  
search function by entering keywords in the  
[Search] menu.  
1. On the [LG Smart World] or [My Apps] screen,  
press red (R) colored button.  
1. Press HOME ( ).  
2. Fill the [ID] and [Password] field using the virtual  
keyboard.  
2. Select the [Search] icon on the home menu  
using W/S/A/D, and press ENTER (b).  
If you do not have an account, press red (R)  
colored button to register.  
The [Search] menu appears on the screen with  
virtual keyboard.  
3. Use W/S/A/Dto select [OK], and press  
ENTER (b) to sign in with your account.  
3. Use  
W/S/A/D  
to select letters then press  
ENTER (b) to confirm your selection on the  
virtual keyboard.  
If you select the [Auto Sign In] check box,  
your ID and password are remembered and  
automatically signed in without entering them.  
4. When you finish entering the keyword, select  
[OK] and press ENTER (b) to display search  
result.  
Note  
,
If you want to sign in with other account,  
press red (R) colored button on [LG Smart  
World] or [My Apps] screen, and select  
[Change User] option.  
y
y
5. Use W/S/A/Dto select a desired content,  
and press ENTER (b) to move to the selected  
content directly.  
4
Note  
To view the information of your account and  
applications, press red (R) colored button on  
[LG Apps] or [My Apps] screen, and select  
[Account Setting] option.  
,
Depending on the region, the [LG Smart  
World], [My Apps] service and [Search]  
function may not be available.  
y
y
The [Search] function does not search  
content in every online services. It works  
only in certain online services.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
60 Operating  
Using the My Apps  
Menu  
You can move or delete an installed application in  
the [My Apps] menu.  
1. Press HOME ( ).  
2. Select the [My Apps], and press ENTER (b).  
Move an application  
1. Select an application, and press green (G)  
colored button to display the options.  
2. Use W/Sto select [Move], and press ENTER  
(b).  
4
3. Use W/S/A/Dto select a position you want  
to move to, and press ENTER (b).  
Delete an application  
1. Select an application, and press green (G)  
colored button to display the options.  
2. Use W/Sto select [Delete], and press  
ENTER(b).  
3. Use A/Dto select [Yes], and press ENTER (b)  
to confirm.  
Note  
,
Depending on the region, the [LG Smart  
World], [My Apps] service and [Search]  
function may not be available.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Troubleshooting 61  
Troubleshooting  
General  
Symptom  
Cause & Solution  
The Power does not turned on.  
Plug the power cord into the wall outlet securely.  
y
The unit does not start  
playback.  
Insert a playable disc. (Check the disc type, color system, and regional  
code.)  
y
Place the disc with the playback side down.  
Place the disc on the disc tray correctly inside the guide.  
Clean the disc.  
y
y
y
y
Cancel the Rating function or change the rating level.  
The connected USB storage  
device is not recognized.  
Try using different USB cable, some USB cables may not support  
enough current for normal USB operation.  
y
y
y
y
If you use an USB extension cable or USB HUB, the USB devices may  
not be recognized.  
An USB device which requires additional program installation when  
you have connected it to a computer is not supported.  
This unit supports only USB Flash Drive and USB External HDD with  
FAT32 or NTFS format.  
5
The angle cannot be changed.  
Multi-angles are not recorded on the DVD Video being played.  
y
Cannot play video, photo or  
audio files.  
The files are not recorded in a format that the unit can play.  
The unit does not support the codec of the video file.  
y
y
The remote control does not  
work properly.  
The remote control is not pointed at the remote sensor of the unit.  
The remote control is too far from the unit.  
y
y
y
y
There is an obstacle in the path of the remote control and the unit.  
The batteries in the remote control are exhausted.  
The unit is plugged in, but the You can reset the unit as follows.  
power will not turn on or off.  
Unplug the power cord, wait at least five seconds, and then plug it in  
y
again.  
The unit is not operating  
normally.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
62 Troubleshooting  
Network  
Symptom  
Cause & Solution  
BD-Live feature does not work.  
The connected USB storage may not have enough space. Connect  
the USB storage with at least 1GB free space.  
y
y
y
Ensure that the unit is correctly connected to the local area network  
and can access the internet (page 19).  
Your broadband speed may not fast enough to use the BD-Live  
features. Contact your Internet Service Provider (ISP) and increase the  
broadband speed is recommended.  
The [BD-LIVE connection] option in the [Settings] menu is set to  
[Prohibited]. Set the option to [Permitted].  
y
y
Streaming video services (such  
as YouTube™, etc.) are often  
stopped orbufferduring  
playback.  
Your broadband service speed may not be fast enough to stream  
video services. Contact your Internet Service Provider (ISP) and  
increase the broadband speed is recommended.  
Media servers are not displayed  
on the device list.  
The firewall or anti-virus software on your media server is running.  
Turn off the firewall or anti-virus software running on your media  
server.  
y
The player is not connected to the local area network that your media  
server is connected.  
y
y
Cannot connect the player to  
the access point or wireless  
LAN router.  
The wireless communication may be interrupted from household  
devices that are using radio frequencies. Move the player away from  
them.  
5
Access point is not displayed  
on theAccess point namelist.  
The access point or wireless LAN router may not broadcast its SSID.  
Set your access point to broadcast its SSID through your computer.  
y
y
Your network device such as access point may not set with available  
frequency range and channel that this player can support.  
Try setting the frequency range and channel on the network device  
setting.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting 63  
Picture  
Symptom  
Cause & Solution  
There is no picture.  
Select the appropriate video input mode on the TV so the picture  
from the unit appears on the TV screen.  
y
Connect the video connection securely.  
y
y
Check the [HDMI Color Setting] in the [Settings] menu is set to the  
appropriate item that conforms to your video connection.  
Your TV may not support the resolution you have set on the player.  
Change the resolution that your TV accepts.  
y
y
The player’s HDMI OUT jack is connected to a DVI device that does  
not support copyright protection.  
Picture noise appears  
You are playing a disc recorded in a colour system that is different  
from your TV.  
y
Set the resolution which your TV accepts.  
y
y
Blu-ray 3D disc playback does  
not output 3D views.  
Connect the player to your TV with HDMI cable (Type A, High Speed  
HDMI™ Cable).  
Your TV may not supportHDMI 3D mandatory format.  
y
y
The [3D Mode] option in the [Settings] menu is set to [O].  
Set the option to [On].  
Sound  
5
Symptom  
Cause & Solution  
There is no sound or the sound  
is distorted.  
The unit is in scan, slow motion, or pause mode.  
The sound volume is low.  
y
y
y
Check the speaker cable connection. (page 13)  
Customer Support  
You can update the Player using the latest software to enhance the products operation and/or add new  
features. To obtain the latest software for this player (if updates have been made), please visit  
Open Source Software Notice  
To obtain the corresponding source code under GPL, LGPL and other open source licenses, please visit  
available to download with the source code.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
64 Appendix  
Setting up the remote to  
control your TV  
Controlling a TV with  
the Supplied Remote  
Control  
You can operate your TV with the supplied remote  
control.  
If your TV is listed in the table below, set the  
appropriate manufacturer code.  
You can control your TV using the buttons below.  
1. While holding down 1(TV POWER) button, and  
press the manufacturer code for your TV with  
the numerical buttons (see the table below).  
Manufacturer  
LG  
Code number  
1(Default), 2  
Zenith  
1, 3, 4  
1, 2  
6, 7  
8, 9  
4
GoldStar  
Samsung  
Sony  
By pressing  
You can  
1(TV POWER)  
Turn the TV on or off.  
Switch the TV’s input source  
between the TV and other  
input sources.  
Hitachi  
AV/INPUT  
2. Release the 1(TV POWER) button to complete  
setting.  
Scan up or down through  
memorized channels.  
PR/CH W/S  
VOL +/–  
Depending on your TV, some or all buttons may not  
function on the TV, even after entering the correct  
manufacturer code. When you replace the batteries  
of the remote, the code number you have set may  
be reset to the default setting. Set the appropriate  
code number again.  
Adjust the volume of the TV.  
Turn the TV’s volume on or  
off.  
MUTE  
Note  
,
6
Depending on the unit being connected, you  
may not be able to control your TV using some  
of the buttons.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Appendix 65  
Software update  
Network Software  
Update  
You can update the player using the latest software  
to enhance the products operation and/or add  
new features. You can update the software by  
connecting the unit directly to the software update  
server.  
Network update notification  
Note  
From time to time, performance improvements  
and/or additional features or services may be  
made available to units that are connected to a  
broadband home network. If there is new software  
available and the unit is connected to a broadband  
home network, the player will inform you about the  
update as follows.  
,
Before updating the software in your player,  
remove any disc and USB Device from the  
player.  
y
Before updating the software in your player,  
turn the player off and then turn it back on.  
y
y
During the software update procedure,  
do not turn off the player or disconnect  
AC power, or do not press any button.  
Option 1:  
1. The update menu will appear on the screen  
when you turn off the player.  
If you cancel the update, turn off the power  
and turn it on for stable performance.  
y
y
2. Use A/Dto select a desired option and then  
This unit cannot be updated to previous  
software version.  
press ENTER (b).  
1. Check the network connection and settings  
2. Select [Software] option in the [Settings] menu  
then press ENTER (b).  
3. Select [Update] option, and press ENTER (b).  
[OK]  
Starts the software update.  
Exits the update menu and turns  
the power off.  
6
[Cancel]  
Option 2:  
The player will check for the newest update.  
If the software update is available from the update  
server, theUpdateicon appears in the Home  
menu. Press blue (B) colored button to start the  
update procedure.  
Note  
,
Pressing ENTER (b) while checking for the  
y
y
update will end the process.  
If there is no update available, the Message,  
“No update is found.appears. Press ENTER  
(b) to return to the [Home Menu].  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
66 Appendix  
4. If newer version exists, the messageDo you  
want to download it?appears.  
5. Select [OK] to start update. (Selecting [Cancel]  
will end the update.)  
6. The player starts downloading the newest  
update from the server. (Downloading will  
takes several minutes depending on your home  
network condition)  
7. When downloading is completed, the message,  
“Download is complete. Do you want to  
update?appears.  
8. Select [OK] to start updating. (Selecting [Cancel]  
will end the update and downloaded file will  
not be re-usable. To update software the next  
time, the software update procedure has to be  
started from the beginning again.)  
Caution  
>
Do not turn off the power during the software  
update.  
Note  
,
If the software includes the driver update, disc  
tray may open during the process.  
9. When update is completed, the power will be  
turned off automatically in a few seconds.  
10. Turn the power back on. The system now  
operates with the new version.  
Note  
6
,
The Software Update function may not  
work properly depending on your internet  
environment. In this case, you can obtain  
the latest software from the authorized LG  
Electronics Service Center then update your  
player. Refer toCustomer Supporton page 63.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix 67  
Additional Information  
File requirement  
Video files  
File  
Location  
File  
Extension  
Audio  
Format  
Codec Format  
Subtitle  
.avi, “.mpg, “.mpeg,  
.mkv, “.mp4, “.asf,  
.wmv, “.m4v(DRM  
free), .vob, “.3gp,  
.mov, “.trp, “.m2t,  
.mpe, “.m1v, “.m2v,  
.wm, ”.flv, “.ts, “.dat”  
XVID, MPEG1 SS, Dolby  
SubRip (.srt / .txt), SAMI (.smi),  
SubStation Alpha (.ssa/.txt),  
MicroDVD (.sub/.txt), VobSub  
H.264/MPEG-4  
AVC, MPEG2 PS,  
MPEG2 TS, VC-1  
SM (WMV3)  
Digital,  
DTS, MP3,  
Disc,  
USB  
WMA, AAC, (.sub), SubViewer 1.0 (.sub),  
AC3  
SubViewer 2.0 (.sub/.txt), TMPlayer  
(.txt), DVD Subtitle System (.txt)  
.avi, “.mpg, “.mpeg,  
.mkv, “.mp4, “.asf,  
.wmv, “.m4v(DRM  
XVID, MPEG1 SS, Dolby  
SubRip (.srt / .txt), SAMI (.smi),  
SubStation Alpha (.ssa/.txt),  
MicroDVD (.sub/.txt), SubViewer  
H.264/MPEG-4  
AVC, MPEG2 PS,  
Digital,  
DTS, MP3,  
DLNA  
free), .mov, “.trp, “.m2t, MPEG2 TS, VC-1  
WMA, AAC, 1.0 (.sub), SubViewer 2.0 (.sub/.  
.mpe, “.m1v, “.m2v,  
.flv, “.ts”  
SM (WMV3)  
AC3  
txt), TMPlayer (.txt), DVD Subtitle  
System (.txt)  
Audio files  
File  
Location  
File  
Extension  
Sampling Frequency  
Bitrate  
within 32 - 192 kbps  
(WMA), within 32 - 320 not supported on  
kbps (MP3)  
Note  
“mp3, “.wma,  
.wav, “.m4a”  
(DRM free),  
.flac”  
within 32 - 48 kHz  
(WMA), within 16 - 48  
kHz (MP3)  
Some wav files are  
6
Disc,  
USB  
this player.  
“mp3, “.wma,  
.wav, “.m4a”  
(DRM free)  
within 32 - 48 kHz  
(WMA), within 16 - 48  
kHz (MP3)  
within 32 - 192 kbps  
(WMA), within 32 - 320 not supported on  
kbps (MP3)  
Some wav files are  
DLNA  
this player.  
Photo files  
File  
Location  
File  
Extension  
Recommended  
Size  
Note  
Disc,  
USB,  
DLNA  
.jpg, “.jpeg,  
.png, “.gif”  
Less than 4,000 x 3,000 x 24 bit/pixel Progressive and lossless  
Less than 3,000 x 3,000 x 32 bit/pixel compression photo image files  
are not supported.  
Supplied bundle DLNA server for Macintosh edition has limitations in file compatibility, such as ASF, WMA  
and WMV.  
y
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
68 Appendix  
Note  
Note  
,
,
The file name is limited to 180 characters.  
Aavile which is encodedWMV 9 codec”  
is not supported.  
y
y
y
y
Maximum files/Folder: Less than 2000 (total  
number of files and folders)  
This player supports UTF-8 files even it  
contains Unicode subtitle content. This  
player can not support the pure Unicode  
subtitle files.  
Depending on the size and number of the  
files, it may take several minutes to read the  
content on the media.  
y
Depending on the types of file or ways of  
recording, it may not play back.  
y
y
File compatibility may differ depending on  
the server.  
y
y
A disc which was recorded by multi-session  
on normal PC is not supported on this  
player.  
Because the compatibility on DLNA server  
are tested on the bundle DLNA server  
(Nero MediaHome 4 Essentials Windows  
edition) environment, file requirements and  
playback functions may differ depending on  
media servers.  
To be playback a video file, video file name  
and Subtitle file name must be the same.  
y
y
When you play a video file with a extension  
such as.ts, “.m2ts, “.mts, “.tp, “.Trpor.m2t,  
your player may not support subtitle files.  
The file requirements on page 67 are  
not always compatible. There may have  
some restrictions by file features and media  
server’s ability.  
y
y
y
The total playback time of audio file  
indicated on the screen may not correct for  
VBR files.  
y
y
Playing video subtitle files are only available  
on DLNA media server created by supplied  
Nero MediaHome 4 Essentials software on  
this player package.  
Video / Audio codec compatibility may  
differ depending on video file.  
The files from removable media such as USB  
drive, DVD-drive etc. on your media server  
may not be shared properly.  
AVCHD (Advanced Video  
Codec High Definition)  
This player can playback AVCHD format discs.  
These discs are normally recorded and used in  
camcorders.  
This unit cannot support the ID3 Tag  
embedded MP3 file.  
y
y
y
The total playback time of audio file  
indicated on the screen may not correct for  
VBR files.  
6
The AVCHD format is a high definition digital  
video camera format.  
y
y
HD video files contained on the CD/DVD or  
USB 1.0/1.1 may not played properly.  
Blu-ray Disc or USB 2.0 are recommended to  
play back HD video files.  
y
The MPEG-4 AVC/H.264 format is capable of  
compressing images at higher efficiency than  
that of the conventional image compressing  
format.  
This player supports H.264/MPEG-4 AVC  
profile Main, High at Level 4.1. A file with  
higher level may not be supported.  
y
y
This player can playback AVCHD discs using  
“x.v.Colorformat.  
y
y
This player does not support files that are  
2
recorded with GMC 1 or Qpel  
.
Some AVCHD format discs may not play  
depending on the recording condition.  
*
*
*1 GMC – Global Motion Compensation  
*2 Qpel – Quarter pixel  
AVCHD format discs need to be finalized.  
y
y
“x.v.Coloroffers a wider color range than normal  
DVD camcorder discs.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix 69  
About DLNA  
Compatibility notes  
This Player is a DLNA Certified digital media player  
that can display and play video, photo and audio  
content from your DLNA-compatible digital media  
server (PC and Consumer Electronics).  
Because BD-ROM is a new format, certain disc,  
digital connection and other compatibility issues  
are possible. If you experience compatibility  
problems, please contact an authorized  
Customer Service Center.  
y
The Digital Living Network Alliance (DLNA) is a  
cross-industry organization of consumer electronics,  
computing industry and mobile device companies.  
Digital Living provides consumers with easy sharing  
of digital media through your home network.  
This unit allows you to enjoy functions such  
as picture-in-picture, secondary audio and  
Virtual packages, etc., with BD-ROM supporting  
BONUSVIEW (BD-ROM version 2 Profile 1 version  
1.1). Secondary video and audio can be played  
from a disc compatible with the picture-in-  
picture function. For the playback method, refer  
to the instructions in the disc.  
y
The DLNA certification logo makes it easy  
to find products that comply with the DLNA  
Interoperability Guidelines. This unit complies with  
DLNA Interoperability Guidelines v1.5.  
Viewing high-definition content and up-  
converting standard DVD content may require a  
HDMI-capable input or HDCP-capable DVI input  
on your display device.  
y
When a PC running DLNA server software or  
other DLNA compatible device is connected to  
this player, some setting changes of software or  
other devices may be required. Please refer to the  
operating instructions for the software or device for  
more information.  
Some BD-ROM and DVD discs may restrict the  
use of some operation commands or features.  
y
y
Dolby TrueHD, Dolby Digital Plus and DTS-HD are  
supported with maximum 5.1 channels if you  
use HDMI connection for the audio output of the  
unit.  
Certain system requirements  
For high definition video playback:  
High definition display that has HDMI input jack.  
BD-ROM disc with high definition content.  
y
y
y
You can use an USB device to store some disc  
related information, including downloaded  
online content. The disc you are using will  
control how long this information is retained.  
y
HDMI or HDCP capable DVI input on your display  
device is required for some content (as specified  
by disc authors).  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
70 Appendix  
Audio Output Specifications  
Jack/Setting  
HDMI OUT  
3
1
2
Source  
Dolby Digital  
Bit Stream  
* *  
PCM Stereo  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM Multi-Ch  
PCM 5.1ch  
PCM 5.1ch  
PCM 5.1ch  
PCM 5.1ch  
PCM 5.1ch  
PCM 2ch  
DTS Re-encode  
*
DTS  
DTS  
DTS  
DTS  
DTS  
DTS  
DTS  
DTS  
Dolby Digital  
Dolby Digital Plus  
Dolby TrueHD  
DTS  
Dolby Digital Plus  
Dolby TrueHD  
DTS  
DTS-HD  
DTS-HD  
Linear PCM 2ch  
Linear PCM 5.1ch  
Linear PCM 7.1ch  
Linear PCM 2ch  
Linear PCM 5.1ch  
Linear PCM 7.1ch  
PCM 5.1ch  
PCM 5.1ch  
*1 The secondary and interactive audio may not  
be included in the output bitstream if [Digital  
Output] option is set to [Bit Stream]. (Except  
LPCM Codec : the output always include  
interactive and secondary audio.)  
The audio is outputted as PCM 48 kHz/16 bit for  
MP3/WMA file and PCM 44.1kHz/16 bit for Audio  
CD while playback.  
y
y
With digital audio connection (HDMI OUT), Disc  
Menu button sounds of BD-ROM may not be  
heard if the [Digital Output] option is set to [Bit  
Stream].  
*2 This player automatically selects the HDMI  
audio according to the decoding capability  
of the connected HDMI device even though  
[Digital Output] option is set to [Bit Stream].  
If the audio format of the digital output does  
not match the capabilities of your receiver, the  
receiver will produce a strong, distorted sound  
or no sound at all.  
y
y
y
*3 If the [Digital Output] option is set to [DTS re-  
encode], the audio output is limited to 48 kHz  
and 5.1Ch. If the [Digital Output] option is set  
to [DTS re-encode], the DTS Re-encode audio  
is outputted for BD-ROM discs, and the original  
audio is outputted for the other discs (like [Bit  
Stream]).  
Multi-channel Digital Surround Sound via  
digital connection can only be obtained if your  
receiver is equipped with a Digital Multi-channel  
decoder.  
6
This setting is not available on the input signal  
from an external device.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Appendix 71  
Area Code List  
Choose an area code from this list.  
Area  
Code Area  
AF Fiji  
Code Area  
FJ Monaco  
Code Area  
Code  
Afghanistan  
Argentina  
Australia  
Austria  
MC Singapore  
SG  
AR Finland  
AU France  
AT Germany  
BE Great Britain  
BT Greece  
BO Greenland  
BR Hong Kong  
KH Hungary  
CA India  
FI Mongolia  
FR Morocco  
DE Nepal  
MN Slovak Republic  
MA Slovenia  
NP South Africa  
NL South Korea  
AN Spain  
SK  
SI  
ZA  
KR  
Belgium  
Bhutan  
GB Netherlands  
GR Antilles  
GL New Zealand  
HK Nigeria  
HU Norway  
IN Oman  
ES  
Bolivia  
NZ Sri Lanka  
NG Sweden  
NO Switzerland  
OM Taiwan  
LK  
Brazil  
SE  
Cambodia  
Canada  
Chile  
CH  
TW  
TH  
TR  
CL Indonesia  
CN Israel  
ID Pakistan  
IL Panama  
PK Thailand  
PA Turkey  
China  
Colombia  
Congo  
CO Italy  
IT Paraguay  
JM Philippines  
JP Poland  
PY Uganda  
UG  
UA  
US  
UY  
UZ  
VN  
ZW  
CG Jamaica  
CR Japan  
PH Ukraine  
Costa Rica  
Croatia  
PL United States  
PT Uruguay  
RO Uzbekistan  
Vietnam  
HR Kenya  
KE Portugal  
KW Romania  
LY Russian  
Czech Republic  
Denmark  
Ecuador  
Egypt  
CZ Kuwait  
DK Libya  
Federation  
RU  
EC Luxembourg  
EG Malaysia  
SV Maldives  
ET Mexico  
LU  
Zimbabwe  
Saudi Arabia  
MY  
SA  
SN  
6
Senegal  
El Salvador  
Ethiopia  
MV  
MX  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
72 Appendix  
Language Code List  
Use this list to input your desired language for the following initial settings: [Disc Audio],  
[Disc Subtitle] and [Disc Menu].  
Language  
Afar  
Code Language  
6565 French  
6570 Frisian  
Code Language  
7082 Lithuanian  
7089 Macedonian  
7176 Malagasy  
7565 Malay  
Code Language  
7684 Sindhi  
7775 Singhalese  
7771 Slovak  
7783 Slovenian  
7776 Spanish  
7773 Sudanese  
7782 Swahili  
7779 Swedish  
7778 Tagalog  
7865 Tajik  
Code  
8368  
8373  
8375  
8376  
6983  
8385  
8387  
8386  
8476  
8471  
8465  
8469  
8472  
8479  
8482  
8475  
8487  
8575  
8582  
8590  
8673  
8679  
6789  
8779  
8872  
7473  
8979  
9085  
Afrikaans  
Albanian  
Amharic  
Arabic  
8381 Galician  
6577 Georgian  
6582 German  
7289 Greek  
6869 Malayalam  
6976 Maori  
Armenian  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
6583 Greenlandic  
6588 Guarani  
6590 Gujarati  
6665 Hausa  
7576 Marathi  
7178 Moldavian  
7185 Mongolian  
7265 Nauru  
Basque  
6985 Hebrew  
6678 Hindi  
7387 Nepali  
7869 Tamil  
Bengali; Bangla  
Bhutani  
Bihari  
7273 Norwegian  
7285 Oriya  
7879 Telugu  
7982 Thai  
6890 Hungarian  
6672 Icelandic  
6682 Indonesian  
6671 Interlingua  
7789 Irish  
7383 Panjabi  
8065 Tonga  
8083 Turkish  
7065 Turkmen  
8076 Twi  
Breton  
7378 Pashto, Pushto  
7365 Persian  
Bulgarian  
Burmese  
Byelorussian  
Chinese  
Croatian  
Czech  
7165 Polish  
6669 Italian  
7384 Portuguese  
7465 Quechua  
8084 Ukrainian  
8185 Urdu  
9072 Japanese  
7282 Kannada  
6783 Kashmiri  
6865 Kazakh  
7876 Kirghiz  
6978 Korean  
6979 Kurdish  
6984 Laotian  
7079 Latin  
6
7578 Rhaeto-Romance 8277 Uzbek  
7583 Rumanian  
7575 Russian  
7589 Samoan  
7579 Sanskrit  
7585 Scots Gaelic  
7679 Serbian  
7665 Serbo-Croatian  
7686 Shona  
8279 Vietnamese  
Danish  
8285 Volapük  
8377 Welsh  
8365 Wolof  
7168 Xhosa  
8382 Yiddish  
8372 Yoruba  
8378 Zulu  
Dutch  
English  
Esperanto  
Estonian  
Faroese  
Fiji  
7074 Latvian, Lettish  
7073 Lingala  
Finnish  
7678  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Appendix 73  
Trademarks and  
Licenses  
Manufactured under license under U.S. Patent  
Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535;  
7,392,195; 7,272,567; 7,333,929; 7,212,872 & other  
U.S. and worldwide patents issued & pending.  
DTS-HD, the Symbol, & DTS-HD and the Symbol  
together are registered trademarks & DTS-HD  
Master Audio | Essential is a trademark of DTS,  
Inc. Product includes software. © DTS, Inc. All  
Rights Reserved.  
Blu-ray Disc™, Blu-ray™, Blu-ray 3D™, BD-Live™,  
BONUSVIEW™ and the logos are trademarks of  
the Blu-ray Disc Association.  
“DVD Logois a trademark of DVD Format/Logo  
Licensing Corporation.  
DLNA®, the DLNA Logo and DLNA CERTIFIED® are  
trademarks, service marks, or certification marks  
of the Digital Living Network Alliance.  
Java is a trademark of Oracle and/or its affiliates.  
The Wi-Fi CERTIFIED Logo is a certification mark  
of the Wi-Fi Alliance.  
The terms HDMI and HDMI High-Definition  
Multimedia Interface, and the HDMI logo are  
trademarks or registered trademarks of HDMI  
Licensing LLC in the United States and other  
countries.  
The Wi-Fi Protected Setup Mark is a trademark of  
the Wi-Fi Alliance.  
6
“x.v.Coloris a trademark of Sony Corporation.  
“AVCHDand theAVCHDlogo are trademarks of  
Panasonic Corporation and Sony Corporation.  
Manufactured under license from Dolby  
Laboratories. Dolby and the double-D symbol  
are trademarks of Dolby Laboratories.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
74 Appendix  
Cinavia Notice  
This product uses Cinavia technology to limit the  
use of unauthorized copies of some commercially-  
produced film and videos and their soundtracks.  
When a prohibited use of an unauthorized copy is  
detected, a message will be displayed and playback  
or copying will be interrupted.  
“Made for iPod,”“Made for iPhone,andMade for  
iPadmean that an electronic accessory has been  
designed to connect specifically to iPod, iPhone,  
or iPad, respectively, and has been certified  
by the developer to meet Apple performance  
standards. Apple is not responsible for the  
operation of this device or its compliance with  
safety and regulatory standards. Please note that  
the use of this accessory with iPod, iPhone, or  
iPad may affect wireless performance.  
More information about Cinavia technology  
is provided at the Cinavia Online Consumer  
request additional information about Cinavia by  
mail, send a postcard with your mailing address  
to: Cinavia Consumer Information Center, P.O. Box  
86851, San Diego, CA, 92138, USA.  
This product incorporates proprietary technology  
under license from Verance Corporation and is  
protected by U.S. Patent 7,369,677 and other U.S.  
and worldwide patents issued and pending as well  
as copyright and trade secret protection for certain  
aspects of such technology. Cinavia is a trademark  
of Verance Corporation. Copyright 2004-2012  
Verance Corporation. All rights reserved by Verance.  
Reverse engineering or disassembly is prohibited.  
Bluetooth® wireless technology is a system which  
allows radio contact between electronic devices  
within a max. range of 10 meters.  
Connecting individual devices under Bluetooth®  
wireless technology does not incur any charges.  
A mobile phone with Bluetooth® wireless tech-  
nology can be operated via the Cascade if the  
connection was made via Bluetooth® wireless  
technology.  
The Bluetooth® word mark and logos are owned  
by the Bluetooth® SIG, Inc. and any use of such  
marks by LG Electronics is under license.  
Other trademarks and trade names are those of  
their respective owners.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix 75  
The Gracenote service uses a unique identifier to  
track queries for statistical purposes. The purpose of  
a randomly assigned numeric identifier is to allow  
the Gracenote service to count queries without  
knowing anything about who you are. For more  
information, see the web page for the Gracenote  
Privacy Policy for the Gracenote service.  
Gracenote®, Gracenote logo and logotype,  
and thePowered by Gracenotelogo are  
either registered trademarks or trademarks of  
Gracenote, Inc. in the United States and/or other  
countries.  
The Gracenote Software and each item of  
Gracenote Data are licensed to youAS IS.”  
Gracenote makes no representations or warranties,  
express or implied, regarding the accuracy of any  
Gracenote Data from in the Gracenote Servers.  
Gracenote reserves the right to delete data from  
the Gracenote Servers or to change data categories  
for any cause that Gracenote deems sufficient. No  
warranty is made that the Gracenote Software or  
Gracenote Servers are error-free or that functioning  
of Gracenote Software or Gracenote Servers will  
be uninterrupted. Gracenote is not obligated to  
provide you with new enhanced or additional data  
types or categories that Gracenote may provide in  
the future and is free to discontinue its services at  
any time.  
Music recognition technology and related data  
are provided by Gracenote®.  
Portions of the content is copyright © Gracenote  
or its providers.  
Gracenote® End User License Agreement  
This application or device contains software from  
Gracenote, Inc. of Emeryville, California  
(“Gracenote”). The software from Gracenote (the  
“Gracenote Software”) enables this application to  
perform disc and/or file identification and obtain  
music-related information, including name, artist,  
track, and title information (“Gracenote Data”) from  
online servers or embedded databases (collectively,  
“Gracenote Servers”) and to perform other  
functions. You may use Gracenote Data only by  
means of the intended End-User functions of this  
application or device.  
GRACENOTE DISCLAIMS ALL WARRANTIES EXPRESS  
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,  
IMPLIED WARRANTIES OF MERCHANTABILITY,  
FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND  
NON-INFRINGEMENT. GRACENOTE DOES NOT  
WARRANT THE RESULTS THAT WILL BE OBTAINED  
BY YOUR USE OF THE GRACENOTE SOFTWARE  
OR ANY GRACENOTE SERVER. IN NO CASE WILL  
GRACENOTE BE LIABLE FOR ANY CONSEQUENTIAL  
OR INCIDENTAL DAMAGES OR FOR ANY LOST  
PROFITS OR LOST REVENUES.  
You agree that you will use Gracenote Data, the  
Gracenote Software, and Gracenote Servers for  
your own personal non-commercial use only. You  
agree not to assign, copy, transfer or transmit the  
Gracenote Software or any Gracenote Data to any  
third party. YOU AGREE NOT TO USE OR EXPLOIT  
GRACENOTE DATA, THE GRACENOTE SOFTWARE,  
OR GRACENOTE SERVERS, EXCEPT AS EXPRESSLY  
PERMITTED HEREIN.  
6
© Gracenote, Inc. 2009  
You agree that your non-exclusive license to use  
the Gracenote Data, the Gracenote Software, and  
Gracenote Servers will terminate if you violate  
these restrictions. If your license terminates, you  
agree to cease any and all use of the Gracenote  
Data, the Gracenote Software, and Gracenote  
Servers. Gracenote reserves all rights in Gracenote  
Data, the Gracenote Software, and the Gracenote  
Servers, including all ownership rights. Under no  
circumstances will Gracenote become liable for  
any payment to you for any information that you  
provide. You agree that Gracenote, Inc. may enforce  
its rights under this Agreement against you directly  
in its own name.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
76 Appendix  
Specifications  
General  
Power requirements  
Power consumption  
Refer to main label  
Refer to main label  
Approx. 360 mm x 60.5 mm x 299 mm  
(14.1 inches x 2.3 inches x 11.7 inches)  
Dimensions (W x H x D)  
Net Weight (Approx.)  
Operating temperature  
Operating humidity  
2.7 kg (5.9 lbs)  
5 °C to 35 °C (41 °F to 95 °F)  
5 % to 90 %  
Inputs/Outputs  
HDMI OUT (video/audio)  
ANALOG AUDIO IN  
DIGITAL IN (OPTICAL)  
PORT. IN  
19 pin (Type A, HDMI™ Connector) x 1  
2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x 1  
3 V (p-p), Optical jack x 1  
0.5 Vrms (3.5 mm stereo jack) x 1  
Tuner  
FM Tuning Range  
87.5 to 108.0 MHz or 87.50 to 108.00 MHz  
Amplifier  
Power output (3 Ω), (RMS), THD 10 %  
Total  
1000 W  
6
Front  
167 W x 2  
167 W  
Center  
Rear  
167 W x 2  
167 W (Passive)  
Sub-Woofer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix 77  
System  
Laser  
Semiconductor laser  
Wavelength  
405 nm / 650 nm  
Signal system  
Standard NTSC color TV system  
20 Hz to 18 kHz (48 kHz, 96 kHz, 192 kHz sampling)  
Less than 0.05 %  
Frequency response  
Harmonic distortion  
Dynamic range  
LAN port  
More than 80 dB  
Ethernet jack x 1, 10BASE-T / 100BASE-TX  
IEEE 802.11b/g/n (2.4 GHz band)  
DC 5 V 02.1 A  
Wireless LAN (internal antenna)  
Bus Power Supply (USB)  
Speakers  
Front speaker (Left/ Right)  
Type  
1 Way 1 speaker  
Max. Input power  
334 W  
Net Dimensions  
(W x H x D)  
97 mm x 140 mm x 80 mm  
(3.8 inches x 5.5 inches x 3.1 inches)  
Impedance Rated 3 Ω  
Input Power  
167 W  
Net Weight  
0.5 kg (1.1 lbs)  
334 W  
Rear speaker (Left/ Right)  
Type  
1 Way 1 speaker  
Max. Input power  
Net Dimensions  
(W x H x D)  
97 mm x 140 mm x 80 mm  
(3.8 inches x 5.5 inches x 3.1 inches)  
Impedance Rated 3 Ω  
Input Power  
Center speaker  
Type  
167 W  
1 Way 1 speaker  
Net Weight  
0.5 kg (1.1 lbs)  
334 W  
Max. Input power  
Net Dimensions  
(W x H x D)  
260 mm x 92 mm x 73 mm  
(10.2 inches x 3.6 inches x 2.8 inches)  
6
Impedance Rated 3 Ω  
Input Power  
Subwoofer  
Type  
167 W  
1 Way 1 speaker  
Net Weight  
0.65 kg (1.4 lbs)  
334 W  
Max. Input power  
Net Dimensions  
(W x H x D)  
133 mm x 352 mm x 325 mm  
(5.2 inches x 13.8 inches x 12.7 inches)  
Impedance Rated 3 Ω  
Input Power 167 W  
Net Weight  
5.2 kg (11.4 lbs)  
Design and specifications are subject to change without notice.  
y
Download from Www.Somanuals.com. All Manuals Search And Download.  
78 Appendix  
Notes on discs  
Maintenance  
Handling discs  
Do not touch the playback side of the disc. Hold  
the disc by the edges so that fingerprints do not  
get on the surface. Never stick paper or tape on the  
disc.  
Handling the unit  
When shipping the unit  
Please save the original shipping carton and  
packing materials. If you need to ship the unit, for  
maximum protection, re-pack the unit as it was  
originally packed at the factory.  
Storing discs  
After playing, store the disc in its case. Do not  
expose the disc to direct sunlight or sources of heat  
and never leave it in a parked car exposed to direct  
sunlight.  
Cleaning the unit  
To clean the player, use a soft, dry cloth. If the  
surfaces are extremely dirty, use a soft cloth lightly  
moistened with a mild detergent solution. Do not  
use strong solvents such as alcohol, benzine, or  
thinner, as these might damage the surface of the  
unit.  
Cleaning discs  
Fingerprints and dust on the disc can cause poor  
picture quality and sound distortion. Before playing,  
clean the disc with a clean cloth. Wipe the disc from  
the center to out.  
Keeping the exterior surfaces clean  
Do not use strong solvents such as alcohol,  
benzine, thinner, commercially available cleaners,  
or anti-static spray intended for older vinyl records.  
Do not use volatile liquids such as insecticide  
spray near the unit.  
y
y
y
Wiping with strong pressure may damage the  
surface.  
Do not leave rubber or plastic products in  
contact with the unit for a long period of time.  
Maintaining the unit  
The unit is a high-tech, precision device. If the  
optical pick-up lens and disc drive parts are dirty  
or worn, the picture quality could be diminished.  
For details, please contact your nearest authorized  
service center.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix 79  
Important Information  
relating to Network  
Services  
All information, data, documents, communications,  
downloads, files, text, images, photographs,  
graphics, videos, webcasts, publications, tools,  
resources, software, code, programs, applets,  
widgets, applications, products and other content  
(“Content”) and all services and offerings (“Services”)  
provided or made available by or through any  
third party (each aService Provider”) is the sole  
responsibility of the Service Provider from whom it  
originated.  
The availability of and access to Content and  
Services furnished by the Service Provider through  
the LGE Device are subject to change at any time,  
without prior notice, including, but not limited to  
the suspension, removal or cessation of all or any  
part of the Content or Services.  
Should you have any inquiry or problem related  
to the Content or Services, you may refer to the  
Service Provider’s website for the most up-to-  
date information. LGE is neither responsible nor  
liable for customer service related to the Content  
and Services. Any question or request for service  
relating to the Content or Services should be made  
directly to the respective Content and Service  
Providers.  
6
Please note that LGE is not responsible for any  
Content or Services provided by the Service  
Provider or any changes to, removal of, or cessation  
of such Content or Services and does not warrant  
or guaranty the availability of or access to such  
Content or Services.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Kyocera Printer FS C5025N User Manual
Leica Digital Camera 18115 User Manual
Lexmark Printer Accessories 10N0016 User Manual
LG Electronics Range LRE3091S User Manual
Liebherr Refrigerator CS 1640 7082 481 01 User Manual
Lindy Switch 25010 User Manual
LOREX Technology Security Camera LH0181011C8F User Manual
Lux Products Thermostat PSMH45 User Manual
Marshall Amplification Musical Instrument Amplifier MG15MSII User Manual
Microsoft Computer Accessories IC693CPU364 User Manual