LG Electronics Headphones HBM 730 User Manual

English  
Spanish  
LG Electronics  
®
BLUETOOTH Mono Headset  
HBM-730 User manual  
All rights reserved.  
LG Electronics Inc., 2006  
Note : For the best performance and  
to prevent any damage to, or misuse of the  
HBM - 730, please read all of the information  
carefully prior to using the HBM - 730.  
Any modifications or changes to this manual due to  
typographical errors or inaccuracies of stated information  
shall only be made by LG Electronics Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Part Description  
Front  
How to use  
Change direction  
Earloop  
Lanyard Hook  
LED indicator  
Power / End Button  
Volume UP / Down Button  
On the left  
Rotation  
On the right  
Back  
Attaching Lanyard  
Speaker  
MIC  
Hook the clip of the lanyard  
to the bar of the Headset.  
Charging Port  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
5
How to use  
Charging  
How to use  
After pairing successfully, be sure to “Connect” to the LG HBM-730  
If you want to pair with other devices in the future, the Headset  
must be placed in Pairing Mode.  
If it will be not connected the “Pairing” for three minutes, the  
Headset will turn off automatically.  
.
-
-
Remove the cover on the charging port and connect the charger.  
When the charger is connected, with power on or off, the Headset  
will turn off. While charging, the LED indicator will show a solid red light.  
The buttons will not function while the device is charging.  
It takes 2 hours to fully charge the Headset.  
-
-
-
Auto Reconnect  
When charging is complete, the LED indicator will turn off.  
-
When the HBM-730 turns off accidentally or intentionally during  
connected condition, the headset and handset will disconnect.  
Low battery  
-
-
A low battery tone will play once every 30 seconds.  
When the battery is not charged, the Headset will turn off.  
The Headset and handset will automatically reconnect without  
pairing when the HBM-730 turns on.  
Power on  
[ Out of range ]  
-
When the HBM-730 and your handset are separated by a distance  
of 33 feet (10 meters) or more, the Headset and handset will  
disconnect. When the handset and HBM-730 are brought back  
within the required distance, the HBM- 730 will automatically  
reconnect with the handset.  
If the Headset and handset do not automatically reconnect when they  
are back within the required range, briefly press the PWR/ END  
button to reconnect manually.  
-
-
Press and hold the PWR/ END button for 2 seconds.  
The power will turn on and a booting tone will play.  
Power off  
Press and hold the PWR/ END button for 5 seconds.  
A shutdown tone will play, the Bluetooth link will disconnect,  
and the power will turn off.  
-
Pairing  
Volume control  
-
-
Prior to using the Headset for the first time, you must pair it  
with a Bluetooth-enabled handset.  
With the HBM-730 off, press and hold the PWR/ END button for 5 seconds.  
You will hear a pairing tone and the LED indicator will stay red,  
when the device enters Pairing Mode.  
-
-
Press the VOLUME UP or VOLUME DOWN button to adjust the  
speaker volume.  
There are eight levels of speaker volume.  
Calling  
Using your handset, find the Bluetooth Menu and “search for” or  
add” new devices.  
Answering a call  
-
-
Select “LG HBM-730” from the list of devices and pair it with your handset.  
When there is an incoming call, the Headset will ring.  
Briefly press the PWR/ END button to answer an incoming call.  
When asked for the Pass/ PIN code during the pairing procedure,  
please enter “0000” (4 Zeros).  
Once pairing has completed successfully, you will hear a beep.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
7
How to use  
Summary of button functions  
Making a call  
HBM-730  
Action  
Status  
Function  
-
If you make a call from the handset, the call will (subject to phone settings)  
automatically transfer to the Headset. If the call is not automatically  
transferred, you can manually transfer the call by briefly pressing the  
Power on  
Power off  
Power on  
Press the PWR/ END button for 2 seconds.  
Press the PWR/ END button for at least  
5seconds.  
Power off  
PWR/ END button on the HBM-730 (handset and headset must be paired)  
.
Volume up  
-
Briefly press the Volume Up button.  
Voice dialing*  
Volume down  
-
Briefly press the Volume Down button.  
- Handset to Headset  
Briefly press the PWR/ END button  
- Headset to Handset  
Transferring  
a
call  
Talking  
-
Briefly press the PWR/ END button to activate “Voice Command”.  
You will get the best results if you record the voice dialing tag through  
your Headset.  
Press and hold the VOLUME UP button for  
Briefly press the PWR/ END button.  
5
seconds.  
Answering  
Ending call  
Call waiting  
a
call  
Ringing  
Talking  
Talking  
Last number redial*  
a
Briefly press the PWR/ END button.  
-
Press and hold the PWR/ END button for 1second to activate “Last  
Press the PWR/ END button for 1second.  
Press the PWR/ END button for 1second.  
Briefly press the PWR/ END button.  
Number Redial”. The headset will beep, and call the last number dialed.  
Last number redialing Idle  
Ending a call  
Briefly press the PWR/ END button.  
Transferring a call*  
Voice dialing  
Start & stop  
-
(handset must support) voice command  
Pairing mode  
Call reject  
Power off  
Ringing  
Press the PWR/ END button for 5 seconds.  
Press the PWR/ END button for 1second.  
-
While on a call on your handset, briefly press the PWR/ END button  
to transfer the audio to the Headset.(headset and handset must be paired).  
LED indication  
-
And to transfer a call from the Headset to Handset, press and hold  
VOLUME UP button for 5seconds.  
HBM-730  
Status  
Call waiting*  
Function  
Operating  
Action  
-
Answer a second call without hanging up the first call by pressing the  
PWR/ END button for 1second. Press the PWR/ END button for  
1second to return to the original call.  
Power on  
Power off  
The red LED light flickers 4 times.  
The red LED light flickers 4 times and  
then turns off.  
Pairing mode  
The red LED light is lit.  
-
Briefly press the PWR/ END button to terminate both calls at once.  
Headset / handsfree  
Profile connected  
Call connected  
The red LED light flickers  
times every 5 seconds.  
The red LED light flickers  
times every 5 seconds.  
Call Reject*  
2
-
Activate Call Reject by pressing the PWR/ END button for 1second  
when the handset rings.  
2
Charging  
Charging  
The red LED is lit.  
LED is turned  
*
It is possible to use these functions only when your handset supports them.  
For further information about using these features, please consult your  
Download from Www.Somanuals.com. All Manuals Search And Download.off.  
Charging complete  
handset's user manual.  
8
9
Troubleshooting  
Precautions  
Does not turn on  
Check whether the battery Charge the battery.  
of the HBM - 730 is fully  
charged.  
Do not drop the unit from high places.  
Do not modify, repair, or take apart.  
Unable to communicate Check whether the handset Determine whether your handset  
with the LG Bluetooth® supports the Headset or  
supports the Headset,  
or Handsfree profiles.  
Headset HBM - 730  
Handsfree profiles.  
Check whether the battery Charge the battery.  
of the HBM - 730 is low.  
Unable to pair the  
HBM - 730 with the  
Bluetooth® device  
Check and make sure the  
Headset is on.  
Press and hold the PWR/ END  
button for at least 2 seconds to  
turn on the Headset  
Check and make sure the  
With the power off, press and  
Headset is placed in pairing hold the PWR/ END button for  
mode. seconds to place the Headset  
in pairing mode.  
Check the speaker volume. lncrease the volume level.  
5
Low sound (speaker)  
Do not expose directly to water,  
alcohol, benzene, etc. for cleaning.  
Specification  
ITEM  
Description  
Do not expose directly to flammables.  
Bluetooth specification  
Battery  
V1.2 (Handsfree  
/
Headset profiles)  
3.7V, Li- Polymer  
Up to 150Hrs  
Up to 4Hrs  
Stand by time  
Talk Time  
Charging time  
Operation temperature  
<
2Hrs  
-1060℃  
~
Dimension / weight (without necklace) 20.2 mm(W) X 42.2mm(L) X 10.2mm(H) / 9.4g  
Do not place or keep the unit near  
flammables.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
0
1
1
Precautions  
Declaration of Confirmation  
FCC NOTICE TO USERS :  
This device complies with part 15 of the FCC rules.  
Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference and  
(2) This device must accept any interference received, including interference  
that may cause undesired operation.  
Keep unit away from humidity & dust.  
IMPORTANT NOTE :  
To comply with the FCC RF exposure compliance requirements, no change to  
the antenna or the device is permitted. Any change to the antenna or the  
device could result in the device exceeding the RF exposure requirements  
and void user's authority to operate the device.  
Do not place the heavy objects on the unit.  
Changes or modifications not expressly  
approved by the party responsible for  
compliance could void the user's authority to  
operate the equipment.  
Additional Information  
1. Radio frequency exposure  
This Bluetooth® Headset, HBM - 730, is a radio transmitter and receiver.  
When in operation, it communicates with a Bluetooth® equipped mobile  
device by receiving and transmitting radio frequency (RF)  
electromagnetic fields (microwaves) in the frequency range 2.4 to  
2.4835 GHz. The output power of the radio transmitter is low, 0.001  
watt. Your Bluetooth® Headset is designed to operate in compliance with  
the RF exposure guidelines and limits set by national authorities and  
international health agencies when used any compatible LG Electronics  
mobile phone.  
There is a risk of explosion if the battery is  
replaced by an incorrect type.  
Dispose of used batteries according to the  
instructions.  
The earloop is made of a durable plastic that  
does not break but bend. However,  
repetition of bending is not recommended.  
2. Potentially explosive atmosphere  
Turn off your electronic device when in any area with a potentially  
explosive atmosphere. It is rare, but your electronic device could  
generate sparks. Sparks in such areas could cause an explosion or fire  
resulting in bodily injury or even death. Areas with a potentially  
explosive atmosphere are often, but not always, clearly marked.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
2
1
3
Additional Information  
3.Emergency calls  
Additional Information  
7. Conditions  
IMPORTANT!  
-
-
-
The warranty is valid only if the original receipt issued to the original  
purchaser by the dealer, specifying the date of purchase and serial  
number, is presented with the product to be repaired or replaced.  
LG Electronics reserves the right to refuse warranty service if this  
information has been removed or changed after the original purchase  
of the product from the dealer.  
This Bluetooth® Headset and the electronic device connected to the  
Headset operate using radio signals, cellular and landline networks  
as well as user- programmed functions, which cannot guarantee  
connection under all conditions.  
Therefore you should never rely solely upon any electronic device for  
essential communications (e.g. medical emergencies). Remember, in  
order to make or receive calls, the Headset and the electronic device  
connected to the Headset must be switched on and in a service area  
with adequate cellular signal strength. Emergency calls may not be  
possible on all cellular phone networks or when certain network  
services and/ or phone features are in use. Check with your local  
service provider.  
If LG Electronics repairs or replaces the product, the repaired or  
replaced product shall be warranted for the remaining time of the  
original warranty period or for ninety (90) days from the date of  
repair, whichever is longer. Repair or replacement may involve the  
use of functionally equivalent reconditioned units. Replaced parts or  
components will become the property of LG Electronics.  
4. Battery information  
A rechargeable battery has a long service life if treated properly.  
A new battery or one that has not been used for a long period of time  
could have reduced capacity the first few times it is used.  
Do not expose the battery to extreme temperatures, never above  
+ 60(+140F) or under -20(-4F). For maximum battery capacity,  
use the battery in room temperature. If the battery is used in low  
temperatures, the battery capacity will be reduced.  
This Warranty does not cover any failure of the product due to  
normal wear and tear, or due to misuse, including but not limited to  
use in other than the normal and customary manner, in accordance  
with instructions for use and maintenance of the product. Nor does  
this warranty cover any failure of the product due to accident,  
modification or adjustment, acts of God or damage resulting from  
liquid.  
-
-
This warranty does not cover product failures due to improper  
repair installations, modifications or service performed by a non- LG  
Electronics authorized person. Tampering with any of the seals on  
the product will void the warranty.  
The battery can only be charged in temperatures between + 10(+50F)  
and + 45(+ 113F).  
5. Recycling the battery in your Bluetooth® Headset  
The battery in your Bluetooth® Headset must be disposed of properly  
and should never be placed in municipal waste. The LG Electronics  
service partner removing battery will dispose of it according to local  
regulations.  
THERE ARE NO EXPRESS WARRANTIES, WHETHER WRITTEN OR ORAL,  
OTHER THAN THIS PRINTED INCLUDING WITHOUT LIMITATION THE  
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A  
PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED  
WARRANTY. IN NO EVENT SHALL LG ELECTRONICS OR ITS VENDORS BE  
LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY  
NATURE WHATSOEVER, INCLUDING BUT NOT LIMITED TO LOST PROFITS  
OR COMMERCIAL LOSS, TO THE FULL EXTENT THOSE DAMAGES CAN  
BE DISCLAIMED BY LAW.  
6. Safety of the lanyard  
The lanyard of the Headset can be dangerous when the lanyard is  
worn and hooked by some objects. To prevent any potential of  
danger, the lanyard is designed to break when a mass of more than  
5Kg is applied.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
4
1
5
Additional Information  
Some countries/ states do not allow the exclusion or limitation of  
incidental or consequential damages, or limitation of the duration of  
implied warranties, so the preceding limitations or exclusions may  
not apply to you. The warranty provided does not affect the  
consumer's statutory rights under applicable national legislation in  
force, nor the consumer's rights against the dealer arising from their  
sales/ purchase contract.  
Limited Warranty  
Subject to the conditions of this Limited Warranty, LG Electronics  
warrants this product to be free from defects in design, material and  
workmanship at the time of its original purchase by a consumer,  
and for a subsequent period of one (1) year. Should your product  
need warranty service, please return it to the dealer from whom it  
was purchased or contact your local LG Electronics contact center to  
get further information.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
6

Lexmark All in One Printer 90T4110 User Manual
LifeWise Washer 63 1530 User Manual
Linear Headphones HD 265 User Manual
Linksys Printer PPS1UW User Manual
Loewe TV Antenna Connect 32 Full HD+ 100 User Manual
LST Smoke Alarm MS1R User Manual
Manhattan Computer Products Computer Hardware 175357 User Manual
Marshall electronic Microphone V69XM User Manual
Melissa Microwave Oven 653 122 User Manual
Memorex Cordless Telephone MPH6925 User Manual