RC69221M NA1ULL-ENG
VCR / DVD Recorder
OWNER’S MANUAL
MODEL: LGXBR446
CD-R/RW
Before connecting, operating or adjusting this product,
please read this owner’s manual carefully and completely.
Call us and we will
guide you through
your first recording,
for free.
1-800-243-0000
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL.
AND THOSE MARKED ON THE PRODUCT. RETAIN THIS MANUAL FOR FUTURE REFERENCE.
This product has been designed and manufactured to assure personal safety. Improper use can result in electric
shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the following proce-
dures for installation, use, and servicing.
This product does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
1. Read these instructions. - All these safety and oper-
ating instructions should be read before the product is
operated.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the product.
2. Keep these instructions. - The safety, operating and
use instructions should be retained for future refer-
ence.
11. Only use attachments/accessories specified by
the manufacturer.
3. Heed all warnings. - All warnings on the product and
in the operating instructions should be adhered to.
4. Follow all instructions. - All operating and use
instructions should be followed.
5. Do not use this product near water. – For example:
near a bath tub, wash bowl, kitchen sink, laundry tub,
in a wet basement; or near a swimming pool; and
other areas located near water.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
apparatus. When a cart is used, use caution
when moving the cart/product combination to
avoid injury from tip-over.
6. Clean only with dry cloth. – Unplug this product from
the wall outlet before cleaning. Do not use liquid
cleaners.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions. -
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over- heating. The open-
ings should never be blocked by placing the product
on a bed, sofa, rug or other similar surface. This prod-
uct should not be placed in a built-in installation such
as a bookcase or rack unless proper ventilation is pro-
vided or the manufacturer’s instructions have been
adhered to.
13. Unplug this product during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the product has been
damaged in any way, such as power-supply cord
or plug is damaged, liquid has been spilled or
objects have fallen into the product, the product
has been exposed to rain or moisture, does not
operate normally, or has been dropped.
8. Do not install near any heat sources such as radi-
ators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A ground-
ing type plug has two blades and a third ground-
ing prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
• Display Menu . . . . . . . . . . . . . . . . . . . . . . 22
• Disc Language. . . . . . . . . . . . . . . . . . . . . 22
AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
• Dolby Digital. . . . . . . . . . . . . . . . . . . . . . . 23
• DTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
• MPEG . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
• Sampling Freq. (Frequency) . . . . . . . . . . . 23
• DRC (Dynamic Range Control) . . . . . . . . 23
• Vocal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
LOCK (Parental Control) . . . . . . . . . . . . . . 24-25
• Movie Rating . . . . . . . . . . . . . . . . . . . . . . 24
• Set Password. . . . . . . . . . . . . . . . . . . . . . 24
• Country Code. . . . . . . . . . . . . . . . . . . . . . 25
RECORD. . . . . . . . . . . . . . . . . . . . . . . . . . 25-26
• Disc Record Mode . . . . . . . . . . . . . . . . . . 25
• VCR Record Mode. . . . . . . . . . . . . . . . . . 25
• DV Record Audio . . . . . . . . . . . . . . . . . . . 26
• Auto Chapter . . . . . . . . . . . . . . . . . . . . . . 26
DISC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26-28
• Disc Initialize . . . . . . . . . . . . . . . . . . . . . . 26
• Disc Finalize . . . . . . . . . . . . . . . . . . . . . . 27
• Disc Protect . . . . . . . . . . . . . . . . . . . . . . . 27
• PBC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
• Auto Play . . . . . . . . . . . . . . . . . . . . . . . . . 27
• Disc Label . . . . . . . . . . . . . . . . . . . . . . . . 28
General Explanation of On-Screen Display . . . 29
• Displaying Information on-screen . . . . . . . 29
• Displaying OSD While Watching TV . . . . . 29
• Changing TV Channels . . . . . . . . . . . . . . 29
• Changing TV Audio Channel. . . . . . . . . . . 29
OSD Menu Options by Media Type . . . . . . 30-31
• DVD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
• VR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
• Video/+RW/+R . . . . . . . . . . . . . . . . . . . . . 31
• VCD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
• VHS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
INTRODUCTION
Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . 2
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . 3
Table of Contents . . . . . . . . . . . . . . . . . . . . . . 4-5
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-11
Recordable Discs . . . . . . . . . . . . . . . . . . . . . . . 6
Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . 6
Disc-related terms . . . . . . . . . . . . . . . . . . . . . . 7
About Symbols . . . . . . . . . . . . . . . . . . . . . . . . . 7
• About the
symbol display . . . . . . . . . . . . 7
• About the disc symbols for instructions. . . . 7
About Recordable discs . . . . . . . . . . . . . . . . . . 8
• What are “Recording modes”? . . . . . . . . . . 8
• Is editing a DVD like editing a video tape? . 8
• About word ‘Original’ and ‘Playlist’ . . . . . . . 8
About DVD recording . . . . . . . . . . . . . . . . . . 9-11
• Disc types and recording formats, modes,
and settings . . . . . . . . . . . . . . . . . . . . . . . . 9
• Notes for recording. . . . . . . . . . . . . . . . . . . 9
• Recording TV audio channels. . . . . . . . . . 10
• Restrictions on video recording. . . . . . . . . 10
• What is ‘CPRM’? . . . . . . . . . . . . . . . . . . . 10
• Copyright . . . . . . . . . . . . . . . . . . . . . . . . . 10
Card capable of displaying and saving . . . . . . 10
• Using Photo or Music menu
for Memory Card . . . . . . . . . . . . . . . . . . . 10
Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . 11
• Handling the unit . . . . . . . . . . . . . . . . . . . 11
• Cleaning the unit . . . . . . . . . . . . . . . . . . . 11
• Moisture Condensation. . . . . . . . . . . . . . . 11
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . 11
• Handling discs . . . . . . . . . . . . . . . . . . . . . 11
• Storing discs. . . . . . . . . . . . . . . . . . . . . . . 11
• Cleaning discs . . . . . . . . . . . . . . . . . . . . . 11
Remote Control Operation Range . . . . . . . . . . 11
Remote Control Battery Installation . . . . . . . . . 11
Front Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Function Display Window . . . . . . . . . . . . . . . . 13
Remote Control Overview . . . . . . . . . . . . . . . . 14
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
PLAYBACK
Operation with DVD or Video CD . . . . . . . . 32-35
Playing a DVD or Video CD . . . . . . . . . . . . 32-35
• Moving to another TITLE . . . . . . . . . . . . . 32
• Moving to another CHAPTER/TRACKs. . . 32
• Slow Motion . . . . . . . . . . . . . . . . . . . . . . . 32
DVR HOOKUP
Connections . . . . . . . . . . . . . . . . . . . . . . . . 16-19
Connecting Antenna/Cable TV
•
Still Picture and Frame-by-Frame Playback . 33
• Search . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
• Random. . . . . . . . . . . . . . . . . . . . . . . . . . 33
• Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . 33
• Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . 33
• Time Search. . . . . . . . . . . . . . . . . . . . . . . 34
• Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
• Marker Search . . . . . . . . . . . . . . . . . . . . 34
• Disc Menus . . . . . . . . . . . . . . . . . . . . . . . 34
• Title Menus . . . . . . . . . . . . . . . . . . . . . . . 34
• Camera Angle . . . . . . . . . . . . . . . . . . . . . 35
• Changing the Audio Language . . . . . . . . . 35
• Changing the Audio Channel . . . . . . . . . . 35
• 3D Surround . . . . . . . . . . . . . . . . . . . . . . 35
• Subtitles. . . . . . . . . . . . . . . . . . . . . . . . . . 35
• Finding Locations on a Disc . . . . . . . . . . . 35
• Last Condition Memory. . . . . . . . . . . . . . . 35
to VCR/DVD Recorder . . . . . . . . . . . . . . . . . . 16
Connecting to a TV. . . . . . . . . . . . . . . . . . . . . 17
Connecting to Optional Equipment . . . . . . . . . 18
Accessory Audio/Video (A/V) Connections
to VCR/DVD Recorder . . . . . . . . . . . . . . . . . . 19
Connecting a Digital Camcorder . . . . . . . . . . . 19
Before Operation. . . . . . . . . . . . . . . . . . . . . 20-31
Initial Settings. . . . . . . . . . . . . . . . . . . . . . . . . 20
• General Operation . . . . . . . . . . . . . . . . . . 20
GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . 20-22
• Tuning Band Select . . . . . . . . . . . . . . . . . 20
• Auto Channel Set. . . . . . . . . . . . . . . . . . . 20
• To Add or Erase Channels from Memory . 21
• Auto Clock Set . . . . . . . . . . . . . . . . . . . . . 21
• Manual Clock Set. . . . . . . . . . . . . . . . . . . 21
• TV Aspect . . . . . . . . . . . . . . . . . . . . . . . . 22
• Progressive Scan. . . . . . . . . . . . . . . . . . . 22
• Factory Setting. . . . . . . . . . . . . . . . . . . . . 22
LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . . . . 22
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Audio CD and MP3/WMA Operation . . . . . . 36-38
Playing an Audio CD or MP3/WMA Disc . . . . . 36
Music menu options . . . . . . . . . . . . . . . . . . . . 36
• Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
• Moving to Another Track. . . . . . . . . . . . . . 37
• Repeat. . . . . . . . . . . . . . . . . . . . . . . . . . . 37
• Random. . . . . . . . . . . . . . . . . . . . . . . . . . 37
• Changing the Audio Channel . . . . . . . . . . 37
• Search . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
• Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . 37
Notes on MP3/WMA Recordings. . . . . . . . . . . 37
Copying MP3/WMA file(s)
EDITING
Title List and Chapter List Menu . . . . . . . . 49-53
Using the Title List-Original menu . . . . . . . . . . 49
Using the Chapter List-Original menu . . . . . . . 49
Using the Title List-Playlist Menu. . . . . . . . . . . 50
Using the Chapter List-Playlist Menu. . . . . . . . 50
Using the Title List menu. . . . . . . . . . . . . . . . . 51
Deleting a Title . . . . . . . . . . . . . . . . . . . . . . . . 51
If the disc has already been finalized . . . . . . . 51
Using the Title List menu (+RW) . . . . . . . . . . . 52
Using the Chapter List menu (+RW) . . . . . . . . 52
Using the Title List menu (+R). . . . . . . . . . . . . 53
Using the Chapter List menu (+R). . . . . . . . . . 53
Title and Chapter Editing . . . . . . . . . . . . . . 54-60
Titles, Chapters and Parts. . . . . . . . . . . . . . . . 54
Adding Chapter Markers . . . . . . . . . . . . . . . . 54
Changing Title Thumbnails . . . . . . . . . . . . . . . 54
Making a New Playlist . . . . . . . . . . . . . . . . . . 55
Adding Additional Titles/Chapters
on the disc to Memory Card . . . . . . . . . . . . . . 38
Erasing MP3/WMA file(s) or folder(s)
from the Memory Card . . . . . . . . . . . . . . . . . . 38
Programmed Playback with Audio CD
and MP3/WMA. . . . . . . . . . . . . . . . . . . . . . . . 39-40
Program List menu options . . . . . . . . . . . . . . . 39
• Repeat Programmed Tracks . . . . . . . . . . 40
• Erasing a Track from the Program List . . . 40
• Erasing the multi tracks
to the Playlist . . . . . . . . . . . . . . . . . . . . . . . . . 55
Deleting a Title/Chapter . . . . . . . . . . . . . . . . . 56
Deleting a Part . . . . . . . . . . . . . . . . . . . . . . . . 56
Naming a Title . . . . . . . . . . . . . . . . . . . . . . . . 57
Combining Two Chapters Into One . . . . . . . . . 57
Moving a Playlist Chapter . . . . . . . . . . . . . . . 58
Protect a Title . . . . . . . . . . . . . . . . . . . . . . . . . 58
Hide a Title/Chapter . . . . . . . . . . . . . . . . . . . . 59
Divide One Title Into Two . . . . . . . . . . . . . . . . 59
Clean-up Recording . . . . . . . . . . . . . . . . . . . . 60
Overwrite Recording . . . . . . . . . . . . . . . . . . . 60
Viewing Title List menu displayed
on the Program List . . . . . . . . . . . . . . . . . 40
• Changing the order of Program List . . . . . 40
Photo Disc Operation . . . . . . . . . . . . . . . . . . 41-42
Viewing a JPEG File. . . . . . . . . . . . . . . . . . . . 41
Photo menu options . . . . . . . . . . . . . . . . . . . . 41
• Photo-CD menu options . . . . . . . . . . . . . . 41
• Photo-Memory menu options . . . . . . . . . . 41
• Still picture . . . . . . . . . . . . . . . . . . . . . . . . 42
• Skip Images. . . . . . . . . . . . . . . . . . . . . . . 42
• Rotate Images . . . . . . . . . . . . . . . . . . . . . 42
• View Slide Shows. . . . . . . . . . . . . . . . . . . 42
• Copying JPEG file(s) on the disc
on other DVD recorders or players . . . . . . . . . 60
Playing Your Recordings
to Memory Card . . . . . . . . . . . . . . . . . . . . 42
• Erasing JPEG file(s) or folder from
on Other DVD Players (Finalizing a Disc) . . . . 60
the Memory Card . . . . . . . . . . . . . . . . . . . 42
• Notes on JPEG Recordings . . . . . . . . . . . 42
VCR Mode Tape Playback . . . . . . . . . . . . . . . . 43
Preparation. . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Normal Playback . . . . . . . . . . . . . . . . . . . . . . 43
• Tracking Control. . . . . . . . . . . . . . . . . . . . 43
Special Effect Playback. . . . . . . . . . . . . . . . . . 43
• Search . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
• Still Picture and
REFERENCE
Controlling Your TV
with the Supplied Remote . . . . . . . . . . . . . . . . 61
Language Code and Country Code List . . . . . 62
Troubleshooting . . . . . . . . . . . . . . . . . . . . . 63-64
Reset the VCR/DVD Recorder . . . . . . . . . . . . 64
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 65
Frame-by-Frame Playback . . . . . . . . . . . . 43
• Slow Motion . . . . . . . . . . . . . . . . . . . . . . . 43
• Counter Memory Function . . . . . . . . . . . . 43
About the symbols for instructions
Indicates hazards likely to cause harm to the unit
itself or other material damage.
RECORDING
Basic Recording . . . . . . . . . . . . . . . . . . . . . 44-45
Basic Recording from a TV . . . . . . . . . . . . . . . 44
Instant Timer Recording . . . . . . . . . . . . . . . . . 44
Dubbing from DVD to VCR . . . . . . . . . . . . . . . 45
Dubbing from VCR to DVD . . . . . . . . . . . . . . . 45
Timer Recording . . . . . . . . . . . . . . . . . . . . . . . 46
Checking Timer Recording Details . . . . . . . . . 46
Canceling a Timer Recording . . . . . . . . . . . . . 46
Stopping a Timer Recording in Progress . . . . . 46
Timer Recording Troubleshooting . . . . . . . . . . 46
Recording from an External Input. . . . . . . . . . 47
Recording from External Components. . . . . . . 47
Recording from a Digital Camcorder . . . . . . . . 47
What is DV? . . . . . . . . . . . . . . . . . . . . . . . . . . 48
• DV-Related Messages . . . . . . . . . . . . . . . 48
• Troubleshooting . . . . . . . . . . . . . . . . . . . . 48
Indicates special operating features of this unit.
Indicates tips and hints for making the task easier.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
Recordable Discs
Playable Discs
DVD-RW (DVD - ReWritable): These Discs
DVD
can be recorded on repeatedly. Recordings
can be erased, then you can record again on
the same Disc.
(8 cm/12 cm disc)
Video CD (VCD)
(8 cm / 12 cm disc)
DVD-R (DVD - Recordable): These Discs
can be recorded only once. After you finalize
a DVD-R, you cannot record on it or edit it.
Audio CD
(8 cm/12 cm disc)
In addition, the VCR/DVD Recorder can play
DVD R/DVD RW discs, CD-R/CD-RW discs that con-
tain audio titles, MP3/WMA files, JPEG files, or SVCD
file and Kodak Picture CDs.
DVD+RW (DVD + ReWritable): These Discs
can be recorded on repeatedly. Recordings can
be erased, then you can record again on the
same Disc.
DVD+R (DVD + Recordable): These Discs
can be recorded only once. After you finalize
a DVD+R, you cannot record on it or edit it
any more.
otes
• Depending on the conditions of the recording equip-
ment or the CD-R/RW (or DVD R/ RW) disc itself,
some CD-R/RW (or DVD R/ RW) discs cannot be
played on the unit.
otes
• Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
• This recorder cannot record CD-R or CD-RW discs.
• DVD-R/RW and CD-R/RW discs recorded using a
personal computer or a DVD or CD recorder may not
play if the disc is damaged or dirty, or if there is dirt of
condensation on the recorder’s lens.
•
Do not use irregularly shaped CDs (e.g., heart-shaped
or octagonal). Doing so may result in malfunctions.
Regional code of the VCR/DVD Recorder and DVDs
This VCR/DVD Recorder is designed
• If you record a disc using a personal computer, even
if it is recorded in a compatible format, there are
cases in which it may not play because of the settings
of the application software used to create the disc.
(Check with the software publisher for more detailed
information.)
and manufactured for playback of
1
ALL
Region 1 encoded DVD software. The
region code on the labels of some DVD
discs indicates which type of VCR/DVD Recorder can
play those discs. This unit can play only DVD discs
labeled 1 or ALL. If you try to play any other discs, the
message “Incorrect region code. Can’t playback” will
appear on the TV screen. Some DVD discs may not
have a region code label even though their playback is
prohibited by area limits.
• The company does not hold any responsibility to com-
pensate the contents which should have been record-
ed, and any losses or damages (e.g. losses of busi-
ness profit, or business intermission) that may arise
from malfunction of this recorder (not recording/edit-
ing as intended). Problems arising in the following sit-
uations are included.
otes on DVDs and Video CDs
- When a DVD disc recorded on this VCR/DVD
Recorder is used in a DVD recorder of another
manufacturer, or used (insertion, playback, record-
ing or editing) in a personal computer DVD drive.
Some playback operations of DVDs and Video CDs
may be intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
disc content designed by the software manufacturer,
some playback features of the unit may not be available
or other functions may be added.
- When a DVD that has been used as above is used
again in this VCR/DVD Recorder.
Refer also to the instructions supplied with the DVDs
and Video CDs. Some DVDs made for business pur-
poses may not be played on the unit.
- When a DVD disc recorded in a DVD recorder of
another manufacturer, or in a personal computer
DVD drive is used.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview (Continued)
Disc-related terms
About Symbols
Title (DVD only)
About the
symbol display
The main film content or accompanying feature content
or music album.
“
” may appear on the TV screen during operation.
Each title is assigned a title reference number enabling
you to locate it easily.
This icon means the function explained in this owner’s
manual is not available on that specific disc, or at that
time.
Chapter (DVD only)
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chap-
ters. Each chapter is assigned a chapter number to
enable you to locate the chapter you want. Depending
on the disc, chapters may not be labeled.
About the disc symbols for instructions
A section whose title has one of the following symbols
are applicable only to those discs represented by the
symbol.
Many functions provided on this Recorder are depend-
ent on the recording mode. One or more of the symbols
Track (Video CD and audio CD only)
Sections of a picture or a musical piece on a video CD
or an audio CD. Each track is assigned a track number,
enabling you to locate the track you want.
(
Video
,
VR
,
+R
+RW ) appear by each
,
function (explained in this manual) so that you can see
at a glance whether it’s applicable to the disc loaded.
Scene
Video DVD-R/RW with Video recording mode
On a video CD with PBC (Playback Control), movies
and pictures are divided into “Scenes”. Each scene is
displayed on a menu and assigned a number, enabling
you to quickly locate the scene you want. A scene may
be composed of one or several tracks.
VR
DVD-RW with VR recording mode
+R
DVD+R disc
+RW DVD+RW disc
DVD DVD-Video disc
CD
Audio CDs
Types of video CDs
There are two types of video CDs:
MP3 MP3 CDs
WMA
WMA CDs
JPEG CDs
Video CDs equipped with PBC (Version 2.0)
JPEG
PBC (Playback control) allows you to interact with the
contents of a Video CD using menus, search functions,
and other special operations. High resolution pictures
can be displayed if they are included on the disc.
M/C Memory Card
VHS VHS Tape
The finalized DVD disc is a DVD-Video disc
Video CDs not equipped with PBC (Version 1.1)
Video CDs without PBC are similar to audio CDs,
except they allow playback of video as well as sound.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview (Continued)
About Recordable discs
+RW
DVD+RW mode recording
• 4 different picture quality/recording time settings avail-
able (SP, LP, EP, XP)
How are recordable discs different?
• Playable on regular DVD players
The essential difference among DVD-R, DVD-RW,
DVD+R and DVD+RW is that DVD-R and DVD+R are a
record-once medium, while DVD-RW and DVD+RW are
a re-recordable/erasable medium. You can re-record/
erase a DVD-RW and DVD+RW disc approximately
1,000 times.
• The edited contents is playable on regular DVD play-
ers only after finalizing
• Recordings can be edited the title/chapter
DVD+R mode recording +R
• 4 different picture quality/recording time settings avail-
able (SP, LP, EP, XP)
Can I play my recordable discs in a regular DVD
player?
• Playable on regular DVD players (after finalization)
• Any edited contents are not be compatible on regular
DVD players. (Hide, chapter combine, added chapter
mark, etc.)
Generally, DVD-R, DVD+R discs and DVD-RW discs
recorded in Video mode are playable in a regular DVD
player, but they must be ‘finalized’ first. This process
fixes the contents of the disc to make them readable to
other DVD players as DVD-Video discs.
DVD-RW discs recorded in VR (Video Recording) mode
are playable in some players.
• Limited title/chapter editing features
ote
DVD-Video Format (Video mode) is a new format for
recording on DVD-R/RW and DVD+R/RW discs that
was approved by the DVD Forum in 2000. You may
therefore experience problems playing recordable DVD
discs in some players. Symptoms include video arti-
facts, audio and/or video dropouts and playback sud-
Unfinalized DVD+RW discs are playable in a regular
DVD player.
This indicates a product feature that is
capable of playing DVD-RW discs recorded
with Video Recording (VR) format.
denly stopping.
Our company cannot take responsibility for problems
playing discs recorded on this VCR/DVD Recorder in
other players.
What are “Recording modes”?
There are various recording modes available using this
recorder. When recording to a DVD-R, DVD+R or
DVD+RW disc, recordings are always in Video mode.
DVD-RW discs can be formatted for VR mode recording
or Video mode recording.
Is editing a DVD like editing a video tape?
No. When you edit a video tape you need one video
deck to play the original tape and another to record the
edits. With DVD, you edit by making a ‘Playlist’ of what
to play and when to play it. On playback, the VCR/DVD
Recorder plays the disc according to the Playlist.
VR mode recording VR
• 4 different picture quality/recording time settings avail-
About word ‘Original’ and ‘Playlist’
able (SP, LP, EP, XP)
• Not playable on regular DVD players
• Recordings can be extensively edited
Throughout this manual, you will often see the words
Original and Playlist to refer to the actual content and
the edited version.
Video mode recording Video
• Original: content refers to what’s actually recorded
on the disc.
• 4 different picture quality/recording time settings avail-
able (SP, LP, EP, XP)
• Playlist: content refers to the edited version of the
disc — how the Original content is to be played.
• Playable on regular DVD players (after finalizing)
• Limited editing features
Disc type
DVD-Video
DVD-RW
Disc format
Recording mode
n/a
Functions
Video format
Playback only
Video Recording
format (default)
VR mode
Playback, Recording, Original/Playlist Editing
Video format
Video format
Video mode
Video mode
Playback, limited Recording, limited Editing
DVD-R
Playback, limited Recording, limited Editing
DVD+RW
DVD+R
+RW Video format DVD+RW
+R Video format DVD+R
Playback, limited Recording, Title/Chapter Editing
Playback, limited Recording, limited Title/Chapter Editing
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview (Continued)
Notes for recording
About DVD recording
• The recording times shown are not exact because the
VCR/DVD Recorder uses variable bit-rate video com-
pression. This means that the exact recording time
will depend on the material being recorded.
• When recording a TV broadcast, if the reception is
poor or the picture contains interference, the record-
ing times may be shorter.
otes
• This recorder cannot make recordings on CD-R or
CD-RW discs.
• Our company takes no responsibility for recording fail-
ure due to power cuts, defective discs, or damage to
the recorder.
• If you record still pictures or audio only, the recording
time may be longer.
• Fingerprints and small scratches on a disc can affect
playback and/or recording performance. Please take
proper care of your discs.
• The displayed times for recording and time remaining
may not always add up to exactly the length of the
disc.
Disc types and recording formats, modes,
and settings
• The recording time available may decrease if you
heavily edit a disc.
• If using a DVD-RW disc, make sure you change the
recording format (Video mode or VR mode) before
you record anything on the disc. See page 26 (Disc
Initialize) for how to do this.
This recorder can play five different kinds of DVD disc:
pre-recorded DVD-Video discs, DVD-RW, DVD-R,
DVD+RW and DVD+R discs. The disc format for DVD-R
discs is always “Video format”—the same as pre-record-
ed DVD-Video discs. This means that once finalized,
you can play a DVD-R in a regular DVD player.
The recording mode is closely related to the disc for-
mat. If the disc format is Video Recording format, then
the recording mode is VR mode; if the disc format is
Video mode, then the recording mode is Video mode
(except for DVD-Video, which is not recordable, and so
does not have a recording mode).
• When using a DVD-R disc, you can keep recording
until the disc is full, or until you finalize the disc.
Before you start a recording session, check the
amount of recording time left on the disc.
• When using a DVD-RW disc in Video mode, recording
time available will only increase if you erase the last
title recorded on the disc.
• The Erase Title option in the Title List-Original menu
only hides the title, it does not actually erase the title
from the disc and increase the recording time avail-
able (except for the last recorded title on a DVD-RW
disc in Video mode).
Within the recording modes (which are fixed for the
whole disc) are the record settings. These can be
changed as required for each recording and determine
the picture quality and how much space the recording
will take up on the disc.
• The overwrite recording is available with DVD+RW
disc.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview (Continued)
Recording TV audio channels
Cards capable of displaying and saving
This recorder can record one or two channel audio. For
TV broadcasts, this usually means mono or stereo, but
some programs are broadcast with a main and a SAP
(Secondary Audio Program) audio channel.
Readable Cards
• SmartMedia Card (SMC)
• Compact Flash Card (CF)
• Micro Drive (MD)
If you’re recording in Video mode (or in VR mode), you
can record either the main audio or the SAP audio.
• Secure Digital Card (SD)
• Multi Media Card (MMC)
• Memory Stick (MS)
Restrictions on video recording
• Memory Stick Pro (MS-Pro)
- Compatible with: FAT 12, FAT 16, or FAT 32
- Only use the memory cards recommended.
• You cannot record copy-protected video using this
recorder. Copy-protected video includes DVD-Video
discs and some satellite broadcasts. If copy-protected
material is encountered during a recording, recording
will pause or stop automatically and an error message
will be displayed on-screen.
Regarding Write Protect
For cards that have a write protect switch, if the switch
is on it will not be possible to write or erase the contents
of the card.
• Video that is ‘copy-once only’ can only be recorded
using a DVD-RW disc in VR mode with CPRM (see
below).
Inserting/Removing the Memory Card
What is ‘CPRM’?
CPRM is a copy protection system (with scramble sys-
tem) only allowing the recording of ‘copy once’ broad-
cast programs. CPRM stands for Content Protection for
Recordable Media.
or
CF or MD
This recorder is CPRM compatible, which means that
you can record copy-once broadcast programs, but you
cannot then make a copy of those recordings. CPRM
recordings can only be made on DVD-RW discs format-
ted in VR mode, and CPRM recordings can only be
played on players that are specifically compatible with
CPRM.
Inserting the card.
Insert straight-in until it fits into place.
Removing the card
Extract the card from the card slot.
otes
• Keep the memory card out of reach of children. If
swallowed, seek medical advice immediately.
• This VCR/DVD Recorder can not format a memory
card.
Copyright
• Audio and video recordings you make using this
recorder are for your personal use only. You may not
sell, lend or rent them to other people.
Caution
• This product incorporates copyright protection tech-
nology that is protected by method claims of certain
U.S.patents and other intellectual property rights
owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses
only unless otherwise authorized by Macrovision cor-
poration. Reverse engineering or disassembly is pro-
hibited.
• Do not remove the card in operation (copying, writing,
playing back, etc.). Should you do so, the unit may
malfunction or the card may be damaged.
• Do not insert or extract the smart card when access-
ing the CF (Compact Flash) card.
Using Photo or Music menu for Memory Card
1. Insert a memory card recorded with JPEG or
MP3/WMA file.
2. Press MEMORY on the Remote Control in Tuner
mode and press ENTER.
The Photo or Music menu appears on the TV screen.
ote
If both slots are connected with Memory Card, use v/ V
to select the desired Memory Card slot.
3. You can select between the Music menu and Photo
menu using TITLE button on the Remote Control.
4. Press RETURN to exit the Photo or Music menu for
memory card.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview (Continued)
Precautions
Notes on Discs
Handling discs
Handling the unit
Do not touch the playback side of the disc. Hold the
disc by the edges so that fingerprints will not get on the
surface. Do not stick paper or tape on the disc.
When shipping the unit
The original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packaged at the factory.
When setting up the unit
The picture and sound of a nearby TV, VCR, or radio
may be distorted during playback. In this case, position
the unit away from the TV, VCR, or radio, or turn off the
unit after removing the disc.
Storing discs
After playing, store the disc in its case.
To keep the surface clean
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
light, as there may be a considerable temperature
increase inside the car.
Do not use volatile liquids, such as insecticide spray,
near the unit. Do not leave rubber or plastic products in
contact with the unit for a long period of time. They will
leave marks on the surface.
Cleaning discs
Cleaning the unit
Fingerprints and dust on the disc can cause poor pic-
ture quality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the cen-
ter outward.
To clean the cabinet
Use a soft, dry cloth. If the surfaces are extremely dirty,
use a soft cloth lightly moistened with a mild detergent
solution. Do not use strong solvents such as alcohol,
benzine, or thinner, as these might damage the surface
of the unit.
Yes
No
To obtain a clear picture
The VCR/DVD Recorder is a high-tech, precision
device. If the optical pick-up lens and disc drive parts
are dirty or worn, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.
For details, please contact your nearest dealer.
Moisture Condensation
Remote Control Operation Range
Never operate the VCR/DVD Recorder immediately
after moving it from a cold location to a warm location.
Leave it for two or three hours without operating it. If
you use the VCR/DVD Recorder in such a situation, it
may damage discs/tapes and internal parts.
Point the Remote Control at the remote sensor and
press the buttons.
ꢀ Distance: About 23 ft (7 m) from the front of the
remote sensor.
ꢀ Angle: About 30° in each direction of the front of the
remote sensor.
Remote Control Battery Installation
Detach the battery cover on the rear
of the Remote Control, and insert
two AAA batteries with
aligned correctly.
and
Caution
Do not mix old and new batteries. Never mix different
types of batteries (standard, alkaline, etc.).
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel
POWER button and indicator
Cassette Compartment (VCR deck)
Switches the VCR/DVD Recorder ON and OFF.
Insert a video cassette here.
Lights green when the VCR/DVD Recorder is turned on.
Display window
Shows the current status of
Z OPEN/CLOSE
Opens or closes the disc tray.
the VCR/DVD Recorder.
Disc Tray (DVD deck)
Z EJECT
Ejects the tape in the VCR deck.
Insert a disc here.
MEMORY CARD Slot
Insert a memory card
(CF, MD, SMC, MMC, SD, MS or MS-Pro).
Remote Sensor
Point the VCR/DVD Recorder
Remote Control here.
DVD/VCR indicator
Indicates the active DVD or VCR deck.
DVD/VCR
Toggles control between the DVD deck
and the VCR deck.
z (REC) button
Starts recording.
Press repeatedly to set the recording time.
N (PLAY)
To play back a disc or tape.
DV INPUT
x (STOP)
Stops playback.
Connect the DV output of a digital
camcorder.
DUB (DUBBING)
Press to copy DVD to VCR
(or VCR to DVD).
S-VIDEO IN
Connect the S-Video output of an external source
(TV/ Monitor, VCR, Camcorder, etc.).
CH (v / V)
Scans up or down through
AV2 IN (VIDEO / AUDIO (Left/Right))
memorized channels.
Connect the audio/video output of an external source
(Audio system, TV/ Monitor, VCR, Camcorder, etc.).
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Function Display Window
Disc type indicators
Indicates the type of disc loaded.
Indicates when the recorder is in timer
recording or a timer recording is programmed.
REC The recorder is recording.
PRG Programmed playback active.
TTL Indicates current title.
A disc is inserted in the DVD deck.
A VHS tape is inserted in the VCR deck.
Indicates a DVD-RW disc (VR mode only) is insert-
ed in the DVD deck.
TV Indicates that TV mode is active.
CHP/TRK Indicates current chapter or track number
REC
PRG TTL
VR TV
CHP TRK
DUB
Hi-Fi
ST
SAP
DVD
SVCD
M.CARD
A
B
REPEAT Indicates repeat mode.
M.CARD
Indicates when Memory Card is activated.
Character indicators
Indicates clock, total playing time, elapsed time, remaining
time, title number, chapter/track number, channel, etc.
DUB Indicates that a DVD to VCR (or VCR to DVD)
dubbing is in progress.
Indicates when the VCR/DVD Recorder is Locked.
Hi-Fi Indicates when the VCR/DVD Recorder is playing
a tape in Hi-Fi.
ST Indicates a stereo broadcast is
being received.
SAP Indicates when a SAP BILINGUAL broadcast is being received.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Overview
POWER
EJECT, OPEN/CLOSE
Turns VCR/DVD Recorder ON and OFF.
- Opens and closes the disc tray.
- Ejects the tape in the VCR deck.
TV Control Buttons
-POWER: Switches TV ON and OFF.
-INPUT: Selects the TV’s source.
-CH +/–: Selects TV’s channel.
-VOL +/–: Adjusts TV’s volume.
-MUTE: Turns on or off TV sound.
DVD
Select the VCR/DVD Recorder’s func-
tion mode to DVD.
VCR
Select the VCR/DVD Recorder’s func-
tion mode to VCR.
INPUT
AUDIO
Selects an audio language.
Changes the input to use for recording.
0-9 numerical buttons
Selects numbered options in a menu.
TITLE
SUBTITLE
Selects a subtitle language.
ANGLE
Displays the disc’s Title menu, if
Selects a DVD camera angle,
available.
if available.
BACKWARD / FORWARD (m/M)
z REC
-
DVD: Search backward or forward.
Starts recording. Press repeatedly to set
- VCR: Rewinds/Advances the tape dur-
ing the STOP mode, for fast reverse/
forward picture search.
SKIP (. / >)
Go to next chapter or track. Returns to
beginning of current chapter or track or
go to previous chapter or track.
the recording time.
REC MODE
Selects the recording mode:
- DVD : SP, LP, EP or XP.
- VCR : SP or SLP.
TIMER REC
Displays Timer Record menu.
LIST / DISC MENU
PAUSE/STEP (X)
Pause playback or recording
temporarily.
Accesses menu on a DVD disc, Title List
or Playlist menu.
Press repeatedly for frame-by-frame
playback.
SETUP
Accesses or removes the Setup menu.
N (PLAY)
Starts playback.
DISPLAY
Accesses On-Screen Display.
Displays information while viewing a TV
program.
STOP (x)
Stops playback or recording.
MARKER
Marks any point during playback.
SEARCH
Displays Marker Search menu.
RETURN (O)
Removes the menu.
b B v V (left/right/up/down)
Selects menu options.
ZOOM
Enlarges DVD video image.
DUBBING
Press to copy DVD to VCR (or VCR to
DVD).
CH/TRK(v/V): Selects a program.
Adjusts manually the tape’s picture
onscreen.
ENTER (ꢁ)
Confirms menu selections.
REPEAT
Repeat chapter, track, title or all.
LOCK
Locks/unlocks front panel buttons.
A-B
Repeats sequence between two points
(A and B)
CHP ADD
Inserts a chapter marker when playing/
recording.
RANDOM
THUMBNAIL
Plays tracks in random order.
Selects a thumbnail picture for the
current title for use in the Title List or
Chapter List menu.
TV/VCR
To view channels selected by the VCR
tuner or by the TV tuner.
MEMORY
Accesses the Photo (or Music) menu for
memory card.
LOCK
The Lock feature disables the
front panel buttons to prevent
children from tampering with
the VCR/DVD Recorder.
Simply press LOCK on the
Remote Control to toggle this
feature on and off.
CLEAR
Removes a mark on the Marker Search
menu.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Panel
ANT.IN
Connect the VHF/UHF/CATV antenna to this terminal.
AV 1 IN (VIDEO IN /AUDIO IN (Left/Right))
Connect the audio/video output of an external source
(Audio system, TV/Monitor, VCR, Camcorder).
A/V OUT (VIDEO OUT/AUDIO OUT (Left/Right))
Connect to a TV with video and audio inputs.
COMPONENT/PROGRESSIVE SCAN VIDEO OUT
(Y Pb Pr)
Connect to a TV with Y Pb Pr inputs.
AUDIO OUT (Left/Right)
Connect to a TV or other equipment with audio
inputs.
Cooling fan
COAXIAL (DIGITAL AUDIO OUT jack)
Connect to digital (coaxial) audio equipment.
AC Power Cord
Plug into the
power source.
S-VIDEO OUT
Connect to a S-Video Input on TV.
OPTICAL (DIGITAL AUDIO OUT jack)
Connect to digital (optical) audio equipment.
RF. OUT (DVD/VCR OUT)
Connect to a TV with RF coaxial inputs.
Caution
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Cable Service Without Cable Box
ips
If your cable wire is connected to your TV without a converter
or descrambler box, unscrew the wire from your TV and attach
it to the ANT.IN jack on the VCR/DVD Recorder. Use the
supplied round coaxial cable to connect between the
VCR/DVD Recorder’s OUT TO TV jack and the 75 ohm anten-
na input jack on the TV. With this connection, you can receive
all midband, super band, and hyperband channels. (All cable
channels.)
ꢀ Depending on your TV and other equipment you wish
to connect, there are various ways you could connect
the VCR/DVD Recorder. Use only one of the connec-
tions described below.
ꢀ Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
best connections.
ꢀ For better sound reproduction, connect the recorder’s
AUDIO OUT jacks to the audio in jacks of your
amplifier, receiver, stereo or audio/video equipment.
See “Connecting to Optional Equipment” on page 18.
Cable Service With Cable Box
If a converter is required in your cable system, follow the
instruction below:
The cable hookup permits both TV and VCR/DVD Recorder
operation.
To view or record a CATV channel
Caution
1
Tune the TV to the correct video input channel.
ꢀ Make sure the VCR/DVD Recorder is connected
directly to the TV. Tune the TV to the correct video
input channel.
2 Set the VCR/DVD Recorder channel selector to the output
channel of the Cable Converter box using CH (v / V) or
number (0-9) of your VCR/DVD Recorder. (Example: CH3)
3 Select the channel to view at the Cable Converter Box.
ꢀ Do not connect the VCR/DVD Recorder’s AUDIO
OUT jack to the phono in jack (record deck) of your
audio system.
ote
ꢀ Do not connect your VCR/DVD Recorder via your
VCR. The DVD image could be distorted by the copy
protection system.
If you are using a cable box to tune channels, it is not neces-
sary to do Auto Channel Set as indicated on page 20.
Cable TV
Wall Jack
Connecting Antenna/Cable TV to
VCR/DVD Recorder
Back Panel of
Typical Cable Box
Disconnect the antenna leads from the rear of the
1
2
TV.
Identify the type of cable from your antenna. If it is
a round cable as illustrated, it is a 75 ohm coaxial
antenna cable. This cable will connect directly to
the jack marked ANT.IN on your Recorder.
ip
If your antenna lead wire is a flat type antenna cable,
connect it to an Antenna Adapter (300-ohm to 75-ohm)
(not supplied) and slip the Adapter onto the ANT.IN
jack. The Adapter does not screw on to the VCR/DVD
Recorder, it just slips over the jack.
Rear of VCR/DVD Recorder
Antenna
Antenna
Cable TV
Wall Jack
Flat Wire
(300 ohm)
300/75 ohm
Adaptor
OR
OR
(Not supplied)
Rear of VCR/DVD Recorder
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections (Continued)
Connecting to a TV
S-Video connection
Connect the S-VIDEO OUT jack on the VCR/DVD
Make one of the following connections, depending on
1
Recorder to the S-Video in jack on the TV using the
the capabilities of your existing equipment.
S-Video cable (S).
RF coaxial connection
Connect the Left and Right AUDIO OUT jacks from
2
the VCR/DVD Recorder to the audio left/right in
Connect the RF.OUT jack on the VCR/DVD Recorder to
the antenna in jack on the TV using the 75-ohm Coaxial
Cable supplied (R).
jacks on the TV using the audio cables (A).
®
Component Video (Color Stream ) connection
ote
Connect the COMPONENT/PROGRESSIVE SCAN
If you use this connection, tune the TV to the VCR/DVD
1
VIDEO OUT jacks on the VCR/DVD Recorder to
Recorder’s RF output channel (CH 3 or 4).
the corresponding in jacks on the TV using an Y Pb
Pr cable (C).
How to set the VCR/DVD Recorder’s RF output
channel
Connect the Left and Right AUDIO OUT jacks from
2
the VCR/DVD Recorder to the audio left/right in
When the VCR/DVD Recorder is turned off, press and
hold CH (v/V) on the front panel for about five
seconds to change the RF output channel (CH 03 or
CH 04). “RF-03” or “RF-04” appears in the display win-
dow.
jacks on the TV using the audio cables (A).
®
Progressive Scan (ColorStream pro) connection
ꢀ If your television is a high-definition or “digital ready”
television, you may take advantage of the VCR/DVD
Recorder’s progressive scan output for the highest
video resolution possible.
Audio/Video connection
Connect the VIDEO OUT jack on the VCR/DVD
ꢀ If your TV does not accept the Progressive Scan for-
mat, the picture will appear scrambled if you try
Progressive Scan on the VCR/DVD Recorder.
1
Recorder to the video in jack on the TV using the
video cable (V).
Connect the Left and Right AUDIO OUT jacks from
Connect the COMPONENT/PROGRESSIVE SCAN
2
the VCR/DVD Recorder to the audio left/right in
1
VIDEO OUT jacks on the VCR/DVD Recorder to
jacks from the TV using the audio cables (A).
the corresponding in jacks on the TV using an
optional Y Pb Pr cable (C).
Rear of TV
ANTENNA
INPUT
Connect the Left and Right AUDIO OUT jacks from
S-VIDEO
INPUT
VIDEO
INPUT
COMPONENT/PROGRESSIVE VIDEO INPUT
AUDIO INPUT
2
the VCR/DVD Recorder to the audio left/right in
jacks on the TV using the supplied audio cables
Y
Pr
Pb
R
L
(A).
otes
ꢀ Set Progressive Scan option to “ON” in the General
menu, see page 22.
S
V
A
C
R
ꢀ Progressive Scan does not work with the RF,
Audio/Video or S-Video connections.
Rear of VCR/DVD Recorder
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections (Continued)
Rear of VCR/DVD Recorder
Connecting to Optional Equipment
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Pro Logic ll/
Pro Logic
Connect the Left and Right AUDIO OUT jacks on the
VCR/DVD Recorder to the audio left and right in jacks
on your amplifier, receiver, or stereo system, using the
audio cables (A).
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby Digital™, MPEG 2, or DTS)
O
A
X
Connect one of the VCR/DVD Recorder’s DIGITAL
1
AUDIO OUT jacks (OPTICAL O or COAXIAL X) to
the corresponding in jack on your amplifier. Use an
optional digital (OPTICAL O or COAXIAL X) audio
cable.
L
R
OPTICAL
DIGITAL INPUT
COAXIAL
AUDIO INPUT
DIGITAL INPUT
You will need to activate the VCR/DVD Recorder’s
Amplifier (Receiver)
2
digital output. (See “AUDIO” on page 23).
Digital Multi-channel sound
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats supported by your VCR/DVD Recorder
(MPEG 2, Dolby Digital and DTS). Check the receiver
manual and the logos on the front of the receiver.
Caution:
Due to the DTS Licensing agreement, the digital output
will be in DTS digital out when DTS audio stream is
selected.
otes
ꢀ
If the audio format of the digital output does not match
the capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
ꢀ Six Channel Digital Surround Sound via digital con-
nection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
ꢀ To see the audio format of the current DVD in the on-
screen display, press AUDIO.
ote
This VCR/DVD Recorder does not perform internal (2
channel) decoding of a DTS sound track. To enjoy DTS
multi channel surround, you must connect this
VCR/DVD Recorder to a DTS compatible receiver via
one of this VCR/DVD Recorder’s digital audio outputs.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections (Continued)
Accessory Audio/Video (A/V)
Connecting a Digital Camcorder
Connections to VCR/DVD Recorder
Connect the AV 1 IN or AV 2 IN jacks on the VCR/DVD
Recorder to the audio/video out jacks on your accesso-
ry component, using optional audio/video cables.
Using the front panel DV IN jack, it is possible to con-
nect a DV digital camcorder or video deck or
DVD-R/RW recorder and digitally transfer DV tapes or
DVD-R/RW discs to DVD-R/RW.
Use a DV cable (not supplied) to connect the DV in/out
jack of your DV Digital Camcorder to the front panel DV
IN jack of this VCR/DVD Recorder.
ote
If you use the S-VIDEO IN jack on the front panel, the
VIDEO jack on the front panel is not available.
ote
This jack is for connection to DV equipment only. It is
not compatible with digital satellite tuners or D-VHS
video decks.
DV Digital Camcorder
DV
IN/OUT
Front of VCR/DVD Recorder
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation
Initial Settings
In this menu system, there are several ways to cus-
tomize the settings provided. Most menus consist of
three levels to set up the options, but some require
greater depth for the variety of settings. If you press
SETUP, only the first and second level of the menu sys-
tem will appear on the TV screen. The third level can be
displayed by pressing B. For navigating the menu lev-
els, you will see “B” on the right side of the menu label
to help you go to the next level.
Tuning Band
TV
CATV
Auto Channel Set
CH. Add/Del
Clock Set
TV Aspect
Progressive Scan
Factory Setting
Prev.
Select
Close
Auto Channel Set
To bring up and exit the Menu:
This VCR/DVD Recorder is equipped with a frequency
synthesized tuner capable of receiving up to 181
channels. These include VHF channels 2-13, UHF
channels 14-69 and CATV channels 1-125.
Press SETUP to bring up the menu. A second press of
SETUP will take you back to initial screen.
To go to the next level:
Press B on the Remote Control.
To go back to the previous level:
Press b on the Remote Control.
Preparation:
ꢀ Connect the VCR/DVD Recorder to the desired type of
antenna or cable TV system, as shown in “Connecting
Antenna/Cable TV to VCR/DVD Recorder” on page 16
General Operation
Press SETUP.
The Setup menu appears.
Use v / V to select the GENERAL option.
Press SETUP.
The Setup menu appears.
Use v / V to select the desired option.
1
2
1
2
While the GENERAL option is selected, press B
While the desired item is selected, press B to
3 to move to the second level.
3 move to the second level.
Use v / V to select the “Auto Channel Set”
Use v / V to select the second desired option.
4 option.
4
5
Press B to move to the third level.
Press B to move to the third level.
5 “Start” icon is highlighted.
Press ENTER to begin the channel search.
6 The tuner will automatically cycle through all
available channels in the area and place them in
the tuner’s memory.
Use v / V to select the desired setting then
6 press ENTER to confirm your selection.
Some items require additional steps.
Press SETUP to exit the Setup menu.
Tuning Band
7
Auto Channel Set
CH. Add/Del
Clock Set
Stop
11%
GENERAL
TV Aspect
Progressive Scan
Factory Setting
Tuning Band Select
Press SETUP.
The Setup menu appears.
Use v / V to select the GENERAL option.
1
Prev.
Select
Close
2
While the GENERAL option is selected, press B
ote
3 to move to the second level.
After the Auto Channel Set proceeding is complete,
make sure the Tuning Band is set appropriately (TV or
CATV) on tuning band, follow steps 1~6 as shown pre-
vious (Tuning Band Select) to choose the correct Tuning
Band (TV or CATV).
Use v / V to select the “Tuning Band” option.
4
5
Press B to move to the third level.
Use v / V to select the tuning band option
6 (TV or CATV) then press ENTER.
TV: If you are using a standard antenna to receive channels.
CATV: If you are using basic cable to receive channels.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation (Continued)
While the GENERAL menu is selected, press B
To Add or Erase Channels from Memory
3 to move to the second level.
This feature allows you to add to or erase channels
from memory manually.
Use v / V to select the “Clock Set” option.
4
Follow steps 1-3 as shown above to the
previous page (Auto Channel Set).
Press B to move to the third level.
1
5
Use v / V to select the CH. Add/Del option.
Use v / V to select the “Auto” option then press
6 ENTER.
2
The Auto option is set at the factory. In the Auto option,
the VCR/DVD Recorder looks for a channel carrying XDS
(Extended Data Services) information. XDS updates the
clock using the Coordinated Universal Time.
Press B to move to the third level.
“Edit” icon is highlighted.
Press ENTER.
3
4 The Channel Edit menu appears.
Use v / V to choose your “Time Zone”.
You can set your local Time Zone manually. When
7
Add
Timezone is set to Auto, the VCR/DVD Recorder will use
XDS information to determine the proper setting.
Ch. 2
Delete
Use B to choose the “Daylight Savings” option.
8 Use v / V to choose Auto, On, or Off.
You can turn Daylight Savings On or Off manually. When
it is set to Auto, the VCR/DVD Recorder will use XDS
information to determine the proper setting.
0-9 Input
Close
Use v / V or number buttons to select a channel
5 to add or delete then press B.
“Add” or “Delete” icon is highlighted.
Press ENTER to confirm your setting.
Press ENTER to confirm your setting, then
6
9 press SETUP to exit the Setup menu.
Repeat steps 5-6 to add or erase additional
channels.
ote
7
If your local TV station does not send date and time informa-
tion, or sends incorrect information, you can set the clock man-
ually.
Press SETUP or RETURN to exit the menu.
8
Manual Clock Set
Auto Clock Set
Follow steps 1-5 as shown above to the left
1
(Auto Clock Set).
The VCR/DVD Recorder gives you two ways to set the
time and date: the Auto Clock Feature or manually. The
Auto Clock Feature enables the VCR/DVD Recorder to
set up the clock when the VCR/DVD Recorder is turned
off.
Use v / V to select the “Manual” option then
2 press ENTER.
Tuning Band
Auto Channel Set
CH. Add/Del
The Clock Set feature is set to Auto at the factory. In the
“Auto” setting, the VCR/DVD Recorder looks for a chan-
nel carrying XDS (Extended Data Services) information.
XDS updates the clock using the Coordinated Universal
Time.
Clock Set
TV Aspect
Auto
Manual
Progressive Scan
Factory Setting
2004
Year
Date
/
1
1
Time
:
12
00 AM
Tuning Band
Auto Channel Set
CH. Add/Del
OK
Clock Set
TV Aspect
Auto
Manual
Enter the necessary information for date and
Progressive Scan
Factory Setting
Time Zone
Auto
Auto
3 time.
Daylight
Savings
b / B (left/right): Moves the cursor to the previous
or next column.
v / V (up/down): Changes the setting at the current
cursor position.
Prev.
Select
Close
Press SETUP.
The Setup menu appears.
Use v / V to select the GENERAL menu.
Press ENTER to confirm your setting, then
4 press SETUP to exit the Setup menu.
1
2
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation (Continued)
TV Aspect
Factory Setting
4:3 Letter Box: Select when a standard 4:3 TV is con-
nected. Displays theatrical images with masking bars
above and below the picture.
If you wish, you can reset the VCR/DVD Recorder to its
original factory settings. Select “SET” then press
ENTER.
4:3 Pan Scan: Select when a standard 4:3 TV is con-
nected. Displays pictures cropped to fill your TV screen.
Both sides of the picture are cut off.
The Initialize menu will appear. Use the b B buttons to
select “Yes” and press ENTER.
ote
16:9 Wide: Select when a 16:9 wide TV is connected.
Some options cannot be reset. (Movie Rating, Password and
Country Code)
Tuning Band
Auto Channel Set
CH. Add/Del
Clock Set
Tuning Band
Auto Channel Set
CH. Add/Del
Clock Set
TV Aspect
4:3 Letter Box
Progressive Scan
Factory Setting
4:3 Pan Scan
16:9 Wide
It initializes the system status.
Proceed?
Yes
No
SET
Prev.
Select
Close
Prev.
Select
Close
Progressive Scan
Progressive Scan Video provides the highest quality
pictures with less flickering.
LANGUAGE
•
If you are using the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks, but are connecting the
VCR/DVD Recorder to a standard (analog) televi-
sion, set Progressive Scan to OFF.
Display Menu
Select a language for the Setup menu and on-screen
display.
•
If you are using the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks for connection to a TV or
monitor that is compatible with a progressive scan
signal, set Progressive Scan to ON.
Display Menu
English
Disc Menu
Disc Audio
Disc Subtitle
Tuning Band
Auto Channel Set
CH. Add/Del
Clock Set
TV Aspect
Progressive Scan
Factory Setting
OFF
ON
Prev.
Select
Close
Disc Language
Prev.
Select
Close
Select a language for the disc’s Menu, Audio, and Subtitle.
Original : The original language set for the disc is selected.
Other : To select another language, select Other option then
press ENTER. Use the numbered buttons to key-in the corre-
sponding 4-digit number according to the language code list on
page 62. If you enter the wrong number, press b repeatedly to
delete one by one and correct it.
Caution
Once the setting for Progressive Scan output is entered,
an image will only be visible on a Progressive Scan
compatible TV or monitor. If you set Progressive Scan
to ON in error, you must reset the VCR/DVD Recorder.
First, remove the disc in the VCR/DVD Recorder. Next,
press STOP (x) and hold it for five seconds before
releasing it. The video output will be restored to the
standard setting, and a picture will once again be visible
on a conventional analog TV or monitor.
Display Menu
Original
Disc Menu
Disc Audio
Disc Subtitle
English
French
Italian
Japanese
Spanish
Chinese
Other
- - - -
Prev.
Select
Close
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation (Continued)
AUDIO
Each DVD disc has a variety of audio output options.
Set the VCR/DVD Recorder’s Audio Output according to
the type of audio system you use.
Sampling Freq. (Frequency)
If your receiver or amplifier is NOT capable of handling
96 kHz signals, select 48 kHz. When this choice is
made, this VCR/DVD Recorder will automatically con-
vert any 96 kHz signals to 48 kHz so your system can
decode them.
Dolby Digital
If your receiver or amplifier is capable of handling
96 kHz signals, select 96 kHz. When this choice is
made, this unit will pass each type of signal through
without any further processing.
PCM: Select when connected to a 2-channel digital stereo
amplifier. The VCR/DVD Recorder’s digital audio outputs
sounds in the PCM 2ch format when you play a DVD video
disc recorded on the Dolby Digital recording system.
Bitstream: Select when connected to a Dolby Digital
decoder (or an amplifier or other equipment with a
Dolby Digital decoder).
Dolby Digital
DTS
MPEG
Sampling Freq.
DRC
48KHz
96KHz
Dolby Digital
PCM
DTS
Bitstream
Vocal
MPEG
Sampling Freq.
DRC
Vocal
Prev.
Select
Close
DRC (Dynamic Range Control)
Prev.
Select
Close
With the DVD format, you can hear a program’s sound-
track in the most accurate and realistic presentation
possible, thanks to digital audio technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the quietest ones). Then, you may listen to a movie
at a lower volume without losing clarity of sound. Set
DRC to ON for this effect.
DTS
OFF: The DTS signal will not be output from the DIGI-
TAL AUDIO OUT jack.
Bitstream: Select when connected to a DTS decoder
(or an amplifier or other equipment with a DTS decoder).
Dolby Digital
DTS
OFF
Dolby Digital
MPEG
Bitstream
DTS
Sampling Freq.
DRC
MPEG
Sampling Freq.
Vocal
DRC
OFF
ON
Vocal
Prev.
Select
Close
Prev.
Select
Close
MPEG
Vocal
PCM: Select when connected to a 2-channel digital
stereo amplifier. The VCR/DVD Recorder’s digital audio
outputs sounds in the PCM 2ch format when you play a
DVD video disc recorded on the MPEG1, or MPEG2
recording system.
Set Vocal to ON only when a multi-channel karaoke
DVD is playing. The karaoke channels on the disc will
mix into normal stereo sound.
Bitstream: Select when connected to an MPEG decoder
(or an amplifier or other equipment with an MPEG
decoder).
Dolby Digital
DTS
MPEG
Sampling Freq.
DRC
Dolby Digital
DTS
Vocal
OFF
ON
MPEG
PCM
Sampling Freq.
DRC
Bitstream
Vocal
Prev.
Select
Close
Prev.
Select
Close
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation (Continued)
Level 1 to 8: Some discs contain scenes not suit-
able for children. If you set a rating for the recorder,
all disc scenes with the same rating or lower will be
played. Higher rated scenes will not be played
unless an alternative scene is available on the disc.
The alternative must have the same rating or a
lower one. If no suitable alternative is found, play-
back will stop. You must enter the 4-digit password
or change the rating level in order to play the disc.
LOCK (Parental Control)
Movie Rating
Movies on DVDs may contain scenes not suitable for
children. Therefore, discs may contain Parental Control
information that applies to the complete disc or to
certain scenes on the disc. These scenes are rated
from Level 1 to 8, and alternatively, more suitable
scenes are available for selection on some discs.
Ratings are country-dependent. The Parental Control
feature allows you to prevent discs from being played
by your children or to have certain discs played with
alternative scenes.
Press ENTER to confirm your rating selection,
8 then press SETUP to exit the menu.
Set Password
Changing the 4-digit code
Movie Rating
Movie Rating
No Limit
8(Adult)
Set Password
Country Code
7
6
Set Password
Country Code
Change
Delete
New
Password
5
4
3
0-9 Input
2
1(Kids)
Prev.
Select
Close
Prev. CLEAR Reset
Close
Press SETUP.
1
The Setup menu appears.
Use v / V to select the LOCK option.
Follow steps 1-3 as shown above to the left
(Movie Rating).
1
2
3
2
Use v / V to select the “Set Password” option.
While the LOCK option is selected, press B to
3 move to the second level.
Press B to move to the third level.
Use v / V to select the “Movie Rating” option.
Follow step 6 as shown above to the left (Movie
4
5
4 Rating).
Press B to move to the third level.
While “Change” is selected, press ENTER.
5 If you select “Delete” then press ENTER. The pass-
When you have not entered a password yet.
6 Enter a 4-digit password using the numbered but-
tons to create a personal 4-digit security password.
Enter the 4-digit password again to confirm.
When you have already entered a password;
Enter a 4-digit password using the numbered but-
tons to confirm the personal 4-digit security pass-
word.
word is deleted.
Enter a 4-digit password using the numbered
6 buttons to create a personal 4-digit security
password.
Enter the 4-digit password again.
7
ip
ip
If you enter the wrong number, press b repeatedly to
If you enter the wrong number, press b repeatedly to
delete password numbers one by one then correct it.
delete password numbers one by one then correct it.
If you forget your 4-digit code
Select a rating from 1 to 8 using the v / V but-
If you forget your password, to clear the current pass-
word, follow the procedure below.
7
tons. One (1) has the least playback restrictions.
Eight (8) has the most playback restrictions.
No Limit : If you select “No Limit”, Parental Control
is not active. The disc will play in full.
1 Press SETUP to display the Setup menu.
2 Use the Number buttons to enter the 5-digit number
“21019”.
The message appears on the TV screen.
3 Select “Yes” then press ENTER. The 4-digit pass-
word is cleared. Enter a new code as shown above.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation (Continued)
Country Code
RECORD
Enter the code of a country/area whose standards were
used to rate the DVD video disc, referring to the list
(See “Country Codes”, page 62).
Disc Record Mode
You can set the picture quality for DVD recording; XP
(High quality), SP (Standard quality), LP (Low quality),
EP (Extend quality).
Movie Rating
Set Password
Country Code
U
S
Disc Record Mode
XP
SP
LP
EP
VCR Record Mode
DV Record Audio
Auto Chapter
Prev.
Select
Close
Press SETUP.
The Setup menu appears.
Use v / V to select the LOCK option.
Prev.
Select
Close
1
Press SETUP.
2
1
The Setup menu appears.
Use v / V to select the RECORD option.
While the LOCK option is selected, press B to
3 move to the second level.
2
Use v / V to select the “Country Code” option.
While the RECORD option is selected, press B
4
5
3 to move to the second level.
Press B to move to the third level.
Use v / V to select the “Disc Record Mode”
4 option.
When you have not entered a password yet.
6 Enter a 4-digit password using the numbered but-
tons to create a personal 4-digit security password.
Enter the 4-digit password again.
Press B to move to the third level.
5
Use v / V to select a desired Disc Record Mode
6 (XP, SP, LP or EP).
When you have already entered a password;
Enter a 4-digit password using the numbered but-
tons to confirm the personal 4-digit security pass-
word.
Press ENTER to confirm your selection, then
press SETUP to exit the menu.
7
ip
VCR Record Mode
If you enter the wrong number, press b repeatedly to
delete password numbers one by one then correct it.
You can set the picture quality for VCR recording;
SP (Standard Play), SLP (Super Long Play).
Select the first character using the v / V
7
buttons.
Disc Record Mode
Shift the cursor using B buttons and select the
SP
VCR Record Mode
DV Record Audio
Auto Chapter
SLP
8 second character using v / V buttons.
Press ENTER to confirm your country code
9 selection, then press SETUP to exit the menu.
Prev.
Select
Close
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation (Continued)
DV Record Audio
Disc Initialize
Start
Disc Finalize
Disc Label
Disc Protect
PBC
You need to set this if you have a camcorder using
32kHz/12-bit sound connected to the front panel DV IN
jack.
AutoPlay
Some digital camcorders have two stereo tracks for
audio. One is recorded at the time of shooting; the other
is for overdubbing after shooting.
On the Audio 1 setting, the sound that was recorded
while shooting is used.
Prev.
Select
Close
On the Audio 2 setting, the overdubbed sound is used.
Press SETUP.
Disc Record Mode
VCR Record Mode
1
The Setup menu appears.
Use v / V to select the DISC option.
Audio 1
Audio 2
DV Record Audio
Auto Chapter
2
While the DISC option is selected, press B to
3 move to the second level.
Use v / V to select the “Disc Initialize” option.
4
Prev.
Select
Close
Press B to move to the third level.
5 “Start” icon is highlighted.
Auto Chapter
Press ENTER.
During recording, chapter markers are added automati-
cally at fixed intervals. You can set this interval to 5 min-
utes or 10 minutes. To turn off automatic chapter mark-
ing, select “None”.
6 Disc Initialize menu appears.
In case of DVD-RW, use b / B to select a desired
7
Disc Initialize Mode (VR Mode or Video Mode)
then press ENTER.
In case of DVD+RW, go to step 8.
Disc Record Mode
VCR Record Mode
DV Record Audio
Disc Initialize
None
Auto Chapter
Select a mode.
5 Min
10 Min
VR Mode
Video Mode
Prev.
Select
Close
Use b / B to select “OK”, and press ENTER.
8 It takes a few moments to format the disc.
Disc Initialize
All data on the disc will be deleted.
Proceed?
OK
Cancel
DISC
Disc Initialize
If you load a completely blank disc, the recorder will ini-
tialize the disc.
Caution
If you want to change the disc format, everything
recorded on the disc will be erased.
DVD-R:
The recorder initialize the disc to Video mode.
The recording mode will always be Video mode.
DVD-RW: The Initialize menu will appear. Select “VR
Mode” or “Video Mode” then press ENTER.
DVD+R:
The Initialize menu will appears. Select “Yes”
then press ENTER.
DVD+RW: The recorder initialize the disc to DVD+RW
mode.
Also, you can format the disc from the Setup menu as
below.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation (Continued)
Disc Finalize
Disc Protect
Finalizing ‘fixes’ the recordings in place so that the disc
can be played on a regular DVD player or computer
equipped with a suitable DVD-ROM drive.
When recording in VR mode formatted DVD-RW disc,
set to ON to prevent accidental recording, editing or
erasing of the disc loaded and recording in
DVD+R/+RW disc, set to ON to prevent accidental over-
write recording, clean-up recording, editing or erasing of
the disc loaded.
Finalizing a Video mode disc creates a menu screen for
navigating the disc. This is accessed by pressing
LIST/DISC MENU or TITLE.
If you need to unlock the disc to make edits, select
OFF.
Caution
Once you have finalized a DVD-R and DVD+R
disc, you cannot edit or record anything else on
that disc except DVD+RW. However, you can
record and edit a DVD-RW disc by choosing
Unfinalize.
Disc Initialize
Disc Finalize
Disc Label
OFF
ON
Disc Protect
PBC
AutoPlay
Disc Initialize
Disc Finalize
Disc Label
Disc Protect
PBC
Finalize
Unfinalize
Prev.
Select
Close
AutoPlay
PBC
PBC stands for Playback Control and refers to special
menus and navigation features that are available on
some Video CDs.
Prev.
Select
Close
Follow steps 1-3 as shown on page 26 (Disc
Initialize).
- ON: Video CDs are played according to the PBC, if
available.
1
- OFF: Video CDs are played the same way as Audio
CDs.
Use v / V to select the “Disc Finalize” option.
2
Press B to move to the third level.
3 Finalize is highlighted.
Disc Initialize
Disc Finalize
Disc Label
Press ENTER.
4 Finalize menu appears.
Disc Protect
PBC
OFF
ON
Finalize
AutoPlay
Do you want finalization?
OK
Cancel
Prev.
Select
Close
Use b / B to select OK then press ENTER.
AutoPlay
5 The VCR/DVD Recorder starts finalizing the disc.
When you load a DVD with AutoPlay turned on, the
VCR/DVD Recorder will bypass the Disc menu and
trailers and start playing the movie automatically.
Set “AutoPlay” to ON or OFF.
ote
Finalization can take up to 3-4 minutes or more depend-
ing on the type of disc, how much is recorded on the
disc, and the number of titles on the disc.
Disc Initialize
ips
Disc Finalize
Disc Label
Disc Protect
PBC
ꢀ If you load a DVD-RW that has already been finalized,
you can ‘Unfinalize’ it by choosing Unfinalize from the
Finalize menu. After doing this, you can edit and re-
record onto the disc.
AutoPlay
OFF
ON
ꢀ You cannot unfinalize a DVD-R and DVD+R disc.
Prev.
Select
Close
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation (Continued)
You can also use the Remote Control to
enter Disc Labels:
Disc Label
Use the Disc Label feature to enter a name for the disc.
This name appears when you load the disc and when
you display disc information on-screen.
N (PLAY): Inserts a space at the cursor position.
PAUSE/STEP (X): Deletes the character to the right
• The Disc label can be up to 32 characters long.
• For discs formatted on a different DVD Recorder, you
will see only a limited character set.
of the cursor position.
SKIP (. / >): Moves the cursor left or right.
STOP (x), CLEAR: Deletes the character to the left
of the cursor position.
Disc Initialize
Disc Finalize
0-9: Enters the character corresponding to the
Disc Label
Edit
selected column.
Disc Protect
LIST/DISC MENU, DISPLAY: Switches the keyboard
type (English/Latin Capital, English/Latin
Lowercase, Symbols).
PBC
AutoPlay
Choose OK then press ENTER to set the name
6 and return to the DISC menu.
7
Prev.
Select
Close
Press SETUP to exit the menu.
Follow steps 1-3 as shown “Disc Initialize” on
page 26.
1
Use v / V to select the “Disc Label” option.
2
Press B to move to the third level.
3 “Edit” icon is highlighted.
Press ENTER.
4 Keyboard menu appears.
DVD-VR
Language
English/Latin Capital
1
A
K
U
2
B
L
V
3
C
4
D
N
X
5
E
O
Y
6
F
P
Z
7
8
H
R
9
I
0
J
T
G
Q
M
W
S
Space Delete
OK
Cancel
Enter a name for the disc. Use v V b B to select
5 a character then press ENTER to confirm your
selection.
• English/Latin Capital: Selects a keyboard with
uppercase characters.
• English/Latin Lowercase: Selects a keyboard
with lowercase characters .
• Symbols: Selects a keyboard with all symbols.
• Space: Inserts a space at the cursor position.
• Delete: Deletes the character to the left of the
cursor position.
• b / B: Moves the cursor left or right.
• OK: Confirms the name you have entered.
• Cancel: Deletes all characters and exits the
Keyboard menu.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation (Continued)
Changing TV Channels
If no disc is playing, you can change TV channels using
the number or CH/TRK (v / V) buttons on the Remote
Control, or the CH (v / V) buttons on the front panel.
General Explanation of
On-Screen Display
This manual gives basic instructions for operating the
VCR/DVD Recorder. Some DVDs require specific oper-
ation or allow only limited operation during playback.
ote
When this occurs, the symbol
appears on the TV
Antenna channels are numbered 2 through 69. Cable
screen, indicating that the operation is not permitted by
the VCR/DVD Recorder or is not available on the disc.
channels are numbered 1 through 125.
Changing TV Audio Channel
Some TV programs are broadcast with both a main and
a Secondary Audio Program (SAP). You can change the
TV audio using the AUDIO button.
Displaying Information on-screen
You can display various information about the disc or
tape loaded on-screen.
On-screen display operation
Press AUDIO repeatedly to change the TV audio,
according to Broadcast audio signal as shown
below.
Press DISPLAY repeatedly to display/change the
information displayed on-screen.
1
• STEREO+SAP Audio Signal
Stereo → SAP → Mono → Stereo
• STEREO Audio Signal
Stereo → L → R → Mono → Stereo
• SAP Audio Signal
Mono → SAP → Mono
To remove the on-screen display, press DIS-
2 PLAY or RETURN (O) repeatedly until it disap-
pears.
See the descriptions on pages 30 and 31 for
detailed explanations of on-screen displays for each
media type.
• MONO Audio Signal
Mono
otes
ꢀ Some discs may not provide all the features shown in
the on-screen display examples.
The current audio channel is displayed on-screen.
ꢀ The on-screen display disappears automatically if no
button is pressed for seven seconds.
• If SAP is selected, but there is no SAP channel being
broadcast, you will still hear the main audio (Mono or
Stereo) channel.
Temporary Feedback Icons
• If the sound is poor quality when set to Stereo, you
can often improve it by changing to Mono.
Resume play from this point
Action prohibited or not available
• When an external input is selected, the audio channel
can be switched only to Stereo.
Displaying OSD While Watching TV
While watching TV, press DISPLAY to display/
remove the on-screen display.
For example, when a DVD-RW in VR mode is inserted, you
would see a screen similar to the following:
Indicates channel
Indicates disc type.
number and
audio input
signal received
by the tuner.
Indicates the Recording mode,
free space, and elapsed time
progress bar.
DVD-VR
DVD
VR Mode
SP 1H 32M Free
Ch. 6
MONO
Mono
10/08/2004 11:35AM
Indicates output audio signal.
Indicates current date and time.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation (Continued)
OSD Menu Options by Media Type
DVD
Shows the elapsed playing time
and total time.
Shows the current
title/chapter number and
total number of
DVD
Shows the Current
mode
Title
: 1/4
Chapter : 3/28
0:06:32
/
2:12:10
titles/chapters
Menu Options
Function (Use v / V to select desired option)
Selection Method
Title Number
Shows the current title number and total number of
titles, and skips to the desired title number.
b
/
B
, or
1/6
Numbers, ENTER
Chapter Number
Time search
Shows the current chapter number and total number of
chapters, and skips to the desired chapter number.
Shows the elapsed playing time, and
searches the point by the elapsed time directly.
b
/
B
, or
4/26
Numbers, ENTER
- : -- : --
Numbers, ENTER
Audio language
and Digital Audio
Output mode
Shows the current audio soundtrack language,
encoding method, and channel number, and
changes the setting.
Shows the current subtitles language, and
changes the setting.
Shows the current angle number and total number of
angles, and changes the angle number.
Shows the current sound mode, and
changes the setting.
5.1CH
ENG
b
b
/
/
B
B
1.
Subtitle language
OFF
1/3
ABC
Angle
b
b
/
/
B
B
Sound
NORMAL
Shows the elapsed playing time
and total time.
VR
Shows the title name,
recording date,
Shows the Current
mode
DVD
recording mode, etc.
ORG: Original
Title 1
01/02/03
0:06:32
/
2:12:10
ORG LP
PList: Playlist
Menu Options
Function (Use v / V to select desired option)
Selection Method
Title Number
Shows the current title number and total number of
titles, and skips to the desired title number.
b
/
B
, or
1/6
Numbers, ENTER
Chapter Number
Time search
Shows the current chapter number and total number of
chapters, and skips to the desired chapter number.
Shows the elapsed playing time, and
searches the point by the elapsed time directly.
b
/
B
, or
1/2
Numbers, ENTER
- : -- : --
Numbers, ENTER
Digital Audio
Output mode
Sound
2CH
L+R
Shows the current audio soundtrack encoding method,
and channel number, and changes the setting.
Shows the current sound mode, and
changes the setting.
b
b
/
B
B
NORMAL
/
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Operation (Continued)
OSD Menu Options by Media Type (Continued)
Video
+RW
+R
Shows the elapsed playing time
and total time.
Shows the title name,
recording date,
DVD
Shows the Current
mode.
recording mode.
Title 1
0:06:32
/
2:12:10
01/02/03
LP
Menu Options
Function (Use v / V to select desired option)
Selection Method
Title Number
Shows the current title number and total number of
titles, and skips to the desired title number.
b
/
B
, or
1/6
Numbers, ENTER
Chapter Number
Time search
Shows the current chapter number and total number of
chapters, and skips to the desired chapter number.
Shows the elapsed playing time, and
searches the point by the elapsed time directly.
Shows the current audio soundtrack language,
encoding method, and channel number, and
changes the setting.
Shows the current sound mode, and
changes the setting.
b
/
B
, or
1/1
- : -- : --
2CH
Numbers, ENTER
Numbers, ENTER
Digital Audio
Output mode
1.
L+R
b
b
/
/
B
B
Sound
NORMAL
Shows the elapsed playing time
and total time.
VCD
Shows the current track
number and total
DVD
Track : 1/1
Shows the current
mode
number of tracks, or
0:06:32
/
2:12:10
shows PBC O mode.
N
Menu Options
Function (Use v / V to select desired option)
Selection Method
Track Number
Shows the current track number and total number of tracks
or PBC On mode, and skip to the desired track number.
b
/
B
, or
1/4
Numbers, ENTER
Time
Shows the elapsed playing time (Display only).
0:10:30
–
Audio Channel
Sound
Shows the current audio channel, and
changes the audio channel.
Shows the current sound mode, and
changes the setting.
STEREO
NORMAL
b
b
/
/
B
B
Shows playing speed, the elapsed
progress bar and playing time.
VHS
Shows recording tape
information.
VCR
Shows the Current
mode
VCR
SP
0:12:10
Menu Options
Function (Use v / V to select desired option)
Selection Method
Time
Shows the elapsed playing time (Display only).
0:00:20
HIFI
–
Audio Channel
Shows the audio channel, and
changes the audio channel.
b
/
B
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with DVD and Video CD
Playing a DVD or Video CD
Playback Setup
ote
Unless stated otherwise, all operations described use
the Remote Control. Some features may also be avail-
able on the Setup menu.
ꢀ Before using the Remote Control, press the DVD but-
ton to select the device to be operated.
ꢀ Turn the TV on and select the video input source con-
nected to the VCR/DVD Recorder.
1/6
Moving to another TITLE
DVD
Video
VR
+RW
+R
ꢀ Audio system: Turn the audio system on and select
the input source connected to the VCR/DVD
Recorder.
When a disc has more than one title, you can move to
another title as follows:
ꢀ Press DISPLAY twice and use v / V to select the title
icon. Then, press the appropriate numbered button
(0-9) or b / B to select a title number and press
ENTER to confirm.
Press OPEN/CLOSE to open the disc tray.
1
Load your chosen disc in the tray, with the
2 playback side down.
Moving to another CHAPTER/TRACKs
Press OPEN/CLOSE to close the tray.
3 READING appears on the display window, and
playback starts automatically. If playback does not
start, press PLAY.
DVD
Video
VR
+RW
+R
VCD
4/26
1/4
In some cases, the disc menu might appear
instead.
When a title on a disc has more than one chapter/track,
you can move to another chapter/track as follows:
ꢀ Press SKIP (. or >) briefly during playback to
select the next chapter/track or to return to the begin-
ning of the current chapter/track.
ꢀ Press SKIP (.) twice briefly to step back to the
previous chapter/track.
ip
If a menu screen is displayed
The menu screen may be displayed first after loading a
DVD or Video CD which contains a menu.
ꢀ To go directly to any chapter/track during playback,
press DISPLAY twice. Then, use v / V to select chap-
ter icon (or for a Video CD, select the track icon).
Then, enter the chapter/track number using the num-
bered buttons (0-9) or press b / B and press ENTER.
DVD
Use the b B v V buttons to select the title/chapter you
want to view, then press ENTER to start playback.
Press TITLE or LIST/DISC MENU to return to the menu
screen.
ote
VCD
On a Video CD with PBC, you must set PBC to OFF in
ꢀ Use the number buttons to select the track you want
to view.
the DISC menu to use this function. See page 27.
Press RETURN to return to the menu screen.
ꢀ Menu settings and the exact operating procedures for
using the menu may differ depending on the disc.
Follow the instructions on each menu screen.
You may also set PBC to OFF under the DISC
Settings menu. See page 27.
Slow Motion
DVD
Video
VR
+RW
+R
VCD
1 Press BACKWARD (m) or FORWARD (M)
during pause mode.
The VCR/DVD Recorder will enter SLOW mode.
2 Use the BACKWARD (m) or FORWARD (M) to
select the required speed: t 1/16, t 1/8, t 1/4,
t 1/2, or T 1/16, T 1/8, T 1/4, T 1/2.
With a Video CD, the Slow speed changes to : T
1/8, T 1/4 or T 1/2 (forward).
otes
ꢀ If Parental Control is set and the disc is not within the
Movie Rating settings (not authorized), the 4-digit
code must be entered in order to authorize the disc.
(see “Movie Rating”, on page 24).
3 To exit Slow Motion mode, press PLAY.
ꢀ DVDs may have a Region Code.
Your VCR/DVD Recorder will not play discs that have
a region code different from your VCR/DVD Recorder.
The region code for this VCR/DVD Recorder is 1
(one).
ote
Slow motion playback in reverse is not applicable for
Video CD.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with DVD and Video CD (Continued)
REPEAT
Playing a DVD or Video CD (continued)
CHAPTER
Repeat
DVD
Video
VR
+RW
+R
VCD
Still Picture and Frame-by-Frame Playback
DVD
Video
VR
+RW
+R
VCD
DVD Discs - Repeat Chapter/Title/All/Off
1 Press PAUSE/STEP (X) during playback.
The recorder will now go into PAUSE mode.
2 You can advance or back up the picture frame-by-
frame by pressing b/B repeatedly during PAUSE
mode.
Press REPEAT to select a desired repeat mode.
• CHAPTER: repeats the current chapter.
• TITLE: repeats the current title .
• All:
repeats the all titles on the disc.
(VR mode DVD-RW disc only)
does not play repeatedly.
• OFF:
ote
Frame-by-frame reverse playback is not available on
Video CDs - Repeat Track/All/Off
Video CDs.
Press REPEAT to select a desired repeat mode.
• TRACK: repeats the current track.
Search
• ALL:
repeats the all tracks on the disc.
does not play repeatedly.
DVD
Video
VR
+RW
+R
VCD
• OFF:
1 Press BACKWARD (m) or FORWARD (M) during
playback.
otes
• On a Video CD with PBC, you must set PBC to OFF on the
DISC menu to use the Repeat function (See “PBC” on page
27).
The recorder will now go into SEARCH mode.
2 Press BACKWARD or FORWARD to select the
required speed: b, m, ,, mm, m,,
,, (backward) or B, M, <, MM,
M<, << (forward).
• If you press SKIP (>) once during Repeat Chapter (Track)
playback, the repeat playback cancels.
With a Video CD, the Search speed changes to:
REPEAT
m, ,, mm (backward) or
A
-
B
Repeat A-B
M, <, MM (forward).
3 To exit SEARCH mode, press PLAY (N).
DVD
Video
VR
+RW
+R
VCD
To repeat a sequence in a title:
ote
1 Press A-B at your chosen starting point.
When you press BACKWARD or FORWARD during a
fast forward search or a fast reverse search mode to go
to normal speed, search mode is canceled.
REPEAT A- appears on the TV screen.
2 Press A-B again at your chosen end point.
REPEAT A-B appears briefly on the TV screen, and the repeat
sequence begins.
Random Karaoke DVD
VCD
3 To cancel the sequence, press A-B repeatedly to
select REPEAT OFF.
1 Press RANDOM during playback or in Stop mode.
The unit automatically begins Random Playback and
“RANDOM” appears on the TV screen.
2 To return to normal playback, press RANDOM until
“NORMAL” appears on the TV screen.
ip
By pressing SKIP (>) during Random playback, the
VCR/DVD Recorder selects another title (track) and
resumes Random playback.
otes
ꢀ This function only works with DVD Karaoke discs or
video CDs without PBC.
ꢀ On a Video CD with PBC, you must set PBC to OFF
in the DISC menu to use the Random function.
See page 27.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with DVD and Video CD (Continued)
To Recall a Marked Scene
Playing a DVD or Video CD (Continued)
1 During disc playback, press SEARCH.
The Marker Search menu will appear on the TV screen.
- : -- : --
Time Search
DVD
Video
VR
+RW
+R
Marker Search
Marker Search
The Time Search function allows you to start playing at
any chosen time on the disc.
1 Press DISPLAY twice during playback. The on-screen
display appears on the TV screen.
The Time Search box shows the elapsed playing time of the
current disc.
2 Within 7 seconds, use v / V to select the Time
Search icon in the on-screen display.
Move
Select
CLEAR Delete
Close
The “-:--:--” appears in the Time Search box.
2 Use the b B v V buttons to select a Marked scene
that you want to recall.
3 Press ENTER.
3 Within 7 seconds, use the number buttons to enter
the required start time. Enter hours, minutes, and sec-
onds from left to right in the box.
Playback will start from the Marked scene.
4 To remove the Marker Search menu,
You can not enter an invalid time.
If you enter the wrong numbers, press b / B to move the
under bar (_) to the wrong number. Then reenter the correct
numbers.
press RETURN (O)
To clear a Marked Scene
4 Within 7 seconds, press ENTER to confirm the start
time.
1 During disc playback, press SEARCH.
The Marker Search menu will appear on the TV screen.
Playback starts from the selected time on the disc.
2 Use b B v V to select the Marked scene that you
want to erase.
3 Press CLEAR.
Zoom
DVD
Video
VR
+RW
+R
“Delete selected marker? Continue?” message appears.
4 Use b / B to select “Yes” then press ENTER.
5 Repeat steps 2-4 to erase additional Marked scene.
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1 Press ZOOM during playback or still playback to acti-
6 To remove the Marker Search menu,
vate the Zoom function.
press RETURN (O).
The square frame will be displayed in the right bottom of the
picture. If no button is pressed for more than 5 seconds, the
square frame will disappear.
DVD
Disc Menus
Each press of the ZOOM button changes the TV screen in
Many DVDs contain Disc menus that allow you to
access special features. To open a Disc menu, press
LIST/DISC MENU. Then use the 0-9 buttons to directly
select the desired option, or use the b B v V buttons to
the sequence shown below.
X1 (normal size) → X2 size → X4 size → X1 (normal size)
2 Use the b B v V buttons to move through the
zoomed picture.
highlight your selection and press ENTER.
3 To resume normal playback, press CLEAR or press
1 Press LIST/DISC MENU.
ZOOM repeatedly until the normal picture appears.
The Disc menu is displayed.
2 To exit the Disc menu, press STOP (x).
ote
The zoom function may not work for some DVDs.
DVD
Title Menus
MARKER
1 / 6
Marker Search
1 Press TITLE.
DVD
Video
VR
+RW
+R
VCD
If the current title has a menu, the Title menu will appear on
the TV screen. Otherwise, the Disc menu may appear.
2 The Title menu may contain camera angles, spoken
languages and subtitle options, as well as the chap-
ters for the title.
You can start playback from a memorized point. Up to
six points can be memorized.
To enter a mark, follow these steps.
1 During disc playback, press MARKER when
playback reaches the spot that you want to
memorize.
The Marker icon will appear on the TV screen briefly.
2 Repeat step 1 to enter up to six Marker points on a
disc.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with DVD and Video CD (Continued)
Playing a DVD or Video CD (Continued)
OFF
ABC
DVD
Subtitles
Press SUBTITLE then press b / B repeatedly during
DVD
1/3
Camera Angle
playback to see the different subtitle languages.
If the disc contains scenes recorded at different camera
angles, you can change to a different camera angle
during playback.
Finding Locations on a Disc VCD
You can directly access any point on a video CD using
this function within 95% of progress bar. Use this func-
tion only while a video CD is playing. Playback jumps to
the point specified.
ꢀ Press ANGLE then press b / B repeatedly during
playback to select a desired angle.
The number of the current angle appears on the TV screen.
ip
1 Press SEARCH during playback.
The Camera Angle icon is displayed on the TV screen when
The progress bar appears on the TV screen.
alternate angles are available.
PBC
33%
33%
DVD
Changing the Audio Language
TRK 1
5.1CH
ENG
2 Use b / B to find the desired starting position for
1.
playback.
Press AUDIO then press b / B repeatedly during play-
3 Press ENTER to confirm the selected position.
back to hear a different audio language or audio track.
Playback starts from the selected position.
ote
ote
Some discs feature both Dolby Digital and DTS sound-
tracks. There is no analog audio output when DTS is
selected. To listen to the DTS soundtrack, connect this
recorder to a DTS decoder via one of the digital out-
puts. See page 23 for connection details.
This function will not work if any bookmarks have been
set; see page 34.
Last Condition Memory DVD
This VCR/DVD Recorder memorizes the user settings
for the last disc that you have viewed. Settings remain
in memory even if you remove the disc from the
VCR/DVD Recorder or switch off the VCR/DVD
Changing the Audio Channel
VR
Video
+RW
+R
VCD
Press AUDIO then press b / B repeatedly during play-
back to hear a different audio channel.
- VCD : STEREO, LEFT or RIGHT.
Recorder. If you load a disc that had its settings memo-
rized, the latest stop position is automatically recalled.
- Video, +R/RW : L+R, L+L or R+R.
otes
ꢀ Settings are stored in memory for use any time.
ꢀ This VCR/DVD Recorder does not memorize settings
of a disc if you switch off the VCR/DVD Recorder
before commencing to play it.
With DVD-RW discs recorded in VR mode that have
both a main and a Bilingual audio channel, you can
switch between Main (L), Bilingual (R), or a mix of both
(Main + Bilingual) by pressing AUDIO.
ꢀ The Last Condition Memory function may not work
on some DVDs.
NORMAL
3D Surround
ꢀ Last Condition Memory function for a previous DVD
title is erased once a different DVD title is played.
DVD
Video
VR
+RW
+R
VCD
This unit can produce a 3D Surround effect, which
simulates multi-channel audio playback from two
conventional stereo speakers, instead of the five or
more speakers normally required to listen to multi-
channel audio from a home theater system.
1 Press DISPLAY twice then use v / V to select the
sound icon. Then, use b / B to select “3D SUR.”.
2 To turn off the 3D Surround effect, select “NORMAL”.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio CD and MP3/WMA Operation
Playing an Audio CD or MP3/WMA
Music menu options
CD
MP3
WMA
1. To display menu options, select a tack (or folder) on
Disc
the menu then press ENTER.
2. Use v / V to select an option then press ENTER to
confirm your selection.
The VCR/DVD Recorder can play Audio CDs and
MP3/WMA files on CD-ROM, CD-R, CD-RW,
DVD+R/+RW, DVD-R/-RW discs or Memory Card.
Before playing MP3/WMA files, read “Notes on
MP3/WMA Recordings” on page 37.
CD
Music-Audio CD menu options
Play: Starts playback the selected
Play
track.
Insert a disc and close the tray.
Program Add
Program Add: Adds the track(s) to
Program List. (page 39)
1
To display the Music menu for MP3/WMA file
recorded on the memory card, see “Using Photo or
Music menu for Memory Card” on page 10.
The Music menu appears on the TV screen.
MP3
WMA
Music-CD menu options
• When you select a track.
Music
Music
CD
- Audio CD
Title
Duration
04:47
04:01
03:01
03:30
04:24
05:01
03:48
04:09
05:10
04:11
-
152 Items
Root
Track 1
Track 2
Track 3
Track 4
Track 5
Track 6
Track 7
Track 8
Track 9
Track 10
FOLDER 01
FILE 2.mp3
FILE 3.mp3
FILE 4.mp3
FILE 5.mp3
FILE 6.mp3
FILE 7.mp3
FILE 8.mp3
FILE 9.mp3
FILE 10.mp3
1:07:30
00:00
Play: Starts playback the selected
Play
track.
Program Add
Copy
Program Add: Adds the track(s) to
Program List. (page 39)
Select MARKER Mark LIST Program
Close
Select MARKER Mark LIST Program
Close
Copy: Copies the track(s) to the
Music-Audio CD Menu
Music-CD Menu
memory card. (page 38)
Use v/V to select a track then press PLAY (N).
2 Playback starts.
• When you select a folder.
During playback, the current track’s elapsed playing
time will appear on the display window and menu.
Playback will stop at the end of the disc.
Open: Displays sub-folders and
MP3/WMA files only in the folder.
Program Add: Adds all track(s) in
the folder to Program List. (page 39)
Copy: Copies the folder(s) to the
memory card. (page 38)
Open
Program Add
Copy
ips
ꢀ You can view TV channel or video input source by
pressing RETURN. If you want to return to the Music-
CD or Music-Audio CD menu, press LIST/DISC MENU.
ꢀ On the Music-CD menu, you can display the folders on
the disc. Use v V b B to select the “Folder” icon on the
M/C
Music-CD menu then press ENTER twice.
Music-MP3/WMA Memory menu options
• When you select a track.
ꢀ On CDs with mixed content (audio tracks, MP3/WMA
files and JPEG files), you can select among the Music-
Audio CD menu, Music-CD menu, and Photo-CD menu
by pressing TITLE repeatedly in Stop mode.
Play: Starts playback the selected
track.
Program Add: Adds the track(s) to
Program List. (page 39)
Delete: Deletes the track(s) from
the memory card. (page 38)
Play
ꢀ If you select a folder and press DISPLAY, the number of
subfolders and number of MP3/WMA files in the folder
are displayed.
Program Add
Delete
ꢀ If you are in a file list and want to return to the Folder
list, use the v/V to highlight
and press ENTER to
return to the previous menu screen.
• When you select a folder.
To stop playback at any time, press STOP (x).
Open: Displays sub-folders and
3
Open
MP3/WMA files only in the folder.
Program Add
Delete
Program Add: Adds all track(s) in
the folder to Program List. (page 39)
Delete: Deletes the folder(s) from
the memory card. (page 38)
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio CD and MP3/WMA Operation (Continued)
CD
MP3
M/C
CD
WMA
Pause
Repeat A-B
To repeat a sequence in a title:
1 Press PAUSE/STEP (X) during playback.
1 Press A-B at your chosen start point.
2 To return to playback, press PAUSE/STEP (X) again.
Repeat icon and “A-” appears on the menu screen.
2 Press A-B again at your chosen end point.
The Repeat icon and “A - B” appears on the left side of
menu screen, and the repeat sequence begins.
Moving to Another Track
CD
MP3
M/C
WMA
3 To exit the sequence and return to normal play, press
A-B again.
ꢀ Press SKIP . or > briefly during
playback to go to the next track or to return to the
beginning of the current track.
The Repeat icon disappears from the menu screen.
ꢀ Press SKIP . twice briefly to step back to the pre-
vious track.
ꢀ On an Audio CD, to go directly to any track, enter the
track number using the numbered buttons (0-9) dur-
ing playback.
Notes on MP3/WMA Recordings
About MP3
•
An MP3 file is audio data compressed by using the
MPEG1 audio layer-3 file-coding scheme. We call
files that have the “.mp3” file extension “MP3 files”.
The VCR/DVD Recorder can not read an MP3 file
that has a file extension other than “.mp3”.
CD
MP3
M/C
WMA
Repeat
Press REPEAT to select a desired repeat mode.
•
• TRACK: Repeats the current track.
• ALL (CD): Repeats all the tracks on a disc.
• FOLDER (MP3/WMA): Repeats all the tracks on a folder
of a disc.
About WMA (Window Media Audio) Files
•
A WMA file is made using Microsoft audio
compression technology.
• OFF (No display): Does not play repeatedly.
•
WMA (Windows Media Audio) offers double the
audio compression of the MP3 format.
CD
MP3
M/C
WMA
Random
1 Press RANDOM during playback or when playback
has stopped.
MP3/WMA Disc compatibility with this
recorder is limited as follows:
The VCR/DVD Recorder automatically begins
Random Playback and RANDOM appears on the left
side of menu screen.
•
CD-R/RW physical format should be “ISO 9660”
and “JOLIET”.
•
If you record MP3 files using the software which
cannot create a FILE SYSTEM, for example
“Direct-CD” etc., it is impossible to playback MP3
files. We recommend that you use “Easy-CD
Creator”, which creates an ISO9660 or JOLIET file
system.
2 To return to normal playback, press RANDOM again,
then RANDOM disappears from the menu screen.
Changing the Audio Channel
CD
MP3
M/C
WMA
•
The total number of files and folders on the disc are
free but the total number of files and folders on the
folder should be less than 999.
Press AUDIO repeatedly to hear a different audio chan-
nel (stereo, left or right).
CD
Search
This VCR/DVD Recorder requires discs/recordings to
meet certain technical standards in order to achieve
optimal playback quality. Pre-recorded DVDs are auto-
matically set to these standards. There are many differ-
ent types of recordable disc formats (including CD-R
containing MP3 or WMA files) that require certain pre-
existing conditions (see above) to insure compatible
playback.
1 Press BACKWARD (m) or FORWARD (M) during
playback.
The recorder will now go into SEARCH mode.
2 Press BACKWARD (m) or FORWARD (M) to
select the required speed: m, ,, mm (back-
ward) or M, <, MM (forward).
Search speed and direction are indicated on the menu
screen.
Customers should also note that permission is
required in order to download MP3/WMA files and
music from the Internet. Our company has no right
to grant such permission. Permission should
always be sought from the copyright owner.
3 To exit SEARCH mode, press PLAY (N).
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio CD and MP3/WMA Operation (Continued)
Copying MP3/WMA file(s) on the disc
Erasing MP3/WMA file(s) or folder(s)
MP3
M/C
M/C
WMA
to Memory Card
from the Memory Card
1. Select an MP3/WMA file or folder you wish to erase
on the Music-Memory Card menu.
Use v / V to select an MP3/WMA file or folder on
the Music-CD menu.
1
ip
Selecting multiple files (folders)
Use the MARKER button to select multiple files
1. Select a MP3/WMA file or folder then press
and/or folders.
MARKER.
A check mark appears on the file (folder). Press
MARKER again to cancel the marked file or folder
2. Press ENTER.
The menu options appear on the left side of the
menu.
2. Repeat step 1 to mark additional files (folders).
3. Select “Delete” option then press ENTER.
Press ENTER.
The confirm message for deleting will appear.
2 The options appear on the left side of the menu.
4. Use b / B to select “Yes” then press ENTER.
The selected file(s) or folder(s) is deleted from the
Memory Card.
Use v / V to select the “Copy” option then
3 press ENTER.
Copy menu will appear.
Copy
Select the album
C:\
Copy
NONAME 01
NONAME 02
NONAME 03
Cancel
New album
Use v / V to select a copied folder then press B.
4 “Copy” option is highlighted.
When “Copy” option is highlighted on the Copy
5 menu, press ENTER to begin copying.
otes
• If you select a folder on the disc to copy,
the sub-folders in the folder will not be copied.
• You must insert a memory card in the VCR/DVD
recorder to use this function.
ip
You can create new album (folder). Select “New album”
option on the Copy menu then press ENTER.
“NONAME##” folder is created.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Programmed Playback with Audio CD and MP3/WMA
The Program function enables you to store your favorite
tracks from any disc in the recorder memory.
Program can contain 99 tracks (Audio CD) or 256
tracks (MP3/WMA).
Use v / V to select the track you want to start
6 playing.
Press PLAY (N) to start.
Playback begins in the order in which you programmed
the tracks and “PRG” indicator appears on the display
window.
7
Insert an Audio CD or MP3/WMA disc.
Music menu will appear.
1
Playback stops after playing the last programmed track on
the program list.
Use v V to select a track or fold on the List then
2 press ENTER.
The options appears on the left side of the menu.
otes
Program List menu options
ꢀ Press and hold V for fast to move to the next
CD
MP3
WMA
track or folder.
ꢀ Press and hold v for fast to move to the previ-
ous track or folder.
1. To display menu options, select a tack on the
Program List menu then press ENTER.
The menu options appear on the left side of the
menu.
2. Use v / V to select an option then press ENTER to
confirm your selection.
Use v V to highlight the “Program Add” icon
3 then press ENTER.
The selected track is added to the Program List.
ote
Play: Playback begins in the order
Play
You can switch between the Track List and Program List
in which you programmed the tracks
from the selected track.
menus by pressing LIST/DISC MENU (Music-CD only).
Move
Move: Moves the track(s) to change
Repeat steps 2-3 to place additional tracks on
Delete
the program order.
4 the Program list.
Delete: Deletes the track(s) from
the Program List menu.
ip
You can add multi tracks on the List to the Program List.
1. Select a track then press MARKER.
2. Repeat step 1 to mark additional tracks.
3. Select any track then press ENTER.
The options appears on the left side of the menu.
4. Use v / V to highlight the “Program Add” icon then
press ENTER.
The all marked tracks are added to the Program List.
otes
ꢀ Use the CLEAR button to select all tracks, or cancel
all marked tracks.
ꢀ If you select folder for Programmed Playback, all
tracks in the folder are added to the program list.
Music
Music
CD
- Audio CD
Program List
Track 5
Track 2
Title
-
4 Items
Program List
FILE 2.mp3
FILE 2.mp3
FILE 3.mp3
FILE 4.mp3
Track 1
Track 2
Track 3
Track 4
Track 5
Track 6
Track 7
Track 8
Track 9
Track 10
Track 8
Track 4
1:07:30
00:00
Select MARKER Mark LIST Program
Close
Select MARKER Mark LIST List
Close
Audio CD : Use B to move the tracks to the
5 Program list.
The programmed track you selected last is highlighted on
the program list.
MP3/WMA : Go to next step.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Programmed Playback with Audio CD and MP3/WMA (Continued)
Repeat Programmed Tracks
Press REPEAT to select a desired Repeat mode.
• TRACK : Repeats the current track.
• ALL : Repeats all the tracks on the program list
• OFF (no display) : Does not play repeatedly.
Erasing a Track from the Program List
1 Select the track that you wish to erase from the
Program List then press ENTER.
The options appears on the left side of the menu.
2 Select the Delete icon then press ENTER.
The selected track is deleted on the Program List.
3 Repeat steps 1-2 to delete additional tracks on the
Program List.
Erasing the multi tracks on the
Program List
1. Select a track on the Program List then press
MARKER.
2. Repeat step 1 to mark additional tracks.
3. Select any track then press ENTER.
The options appears on the left side of the menu.
4. Use v / V to highlight the “Delete” icon then press
ENTER.
The all marked tracks are deleted from the Program
List.
Changing the order of Program List
1 Select the track you wish to move on the Program
List then press ENTER.
The options appear on the left side of the menu.
2 Select Move then press ENTER.
A yellow bar appears in the Program List.
3 Use v/V to move the yellow bar to the desired loca-
tion, then press ENTER.
The selected track is moved.
4 If you wish to move other tracks repeat stages 1 - 3.
ip
Use MARKER to move multiple tracks.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Photo Disc Operation
Use v / V to select “Full Screen” option then
5 press ENTER.
JPEG
M/C
Viewing a JPEG File
The recorder can play discs or Memory Card with JPEG
files. Before playing JPEG recordings, read “Notes on
JPEG Recordings” on page 42.
Insert a disc and close the tray.
To display the Photo-CD menu for JPEG files
recorded on the memory card, see “Using Photo
or Music menu for Memory Card” on page 10.
The Photo-CD menu appears on the TV screen.
1
File 03.jpg
4/20
90
90
Prev
Next
Stop
Hide
Photo
- CD
To stop viewing at any time, press STOP.
6 The Photo-CD menu reappears.
Photo menu options
Folder 02
Folder 05
JPEG
Folder 01
Folder 04
Folder 03
1. To display menu options, select a file (or folder) on
the menu then press ENTER.
Folder 08
Close
Folder 06
Select
Folder 07
MARKER Mark
2. Use v / V to select an option then press ENTER to
confirm your selection.
Use v V b B to select a folder, and ENTER.
2 Open icon is highlighted on the left side of the
menu.
JPEG
Photo-CD menu options
• When you select a photo file.
Press ENTER.
3 A list of files in the folder appears.
Full Screen: Shows the selected
Full Screen
Slide Show
Copy
JPEG
Photo
file as full screen.
- CD
Slide Show: Displays Slide Show
menu. (page 42)
Copy: Copies the file(s) to Memory
card. (page 42)
Select
MARKER Mark
Close
• When you select a folder.
Open: Displays sub-folders and
Open
Copy
ote
If the
JPEG files in the folder.
icon displays in the Photo-CD menu, it means
Copy: Copies the folder to memory
card. (page 42)
you cannot see those JPEG files.
Use v V b B to select a file, then press ENTER.
4 The options appear on the left side of the menu.
M/C
Photo-Memory menu options
• When you select a photo file.
ip
ꢀ You can view TV channel or video input source by pressing
RETURN. If you want to return to the Photo-CD, press
LIST/DISC MENU.
Full Screen: Shows the selected
Full Screen
Slide Show
Delete
file as full screen.
Slide Show: Displays Slide Show
menu. (page 42)
Delete: Deletes the selected file(s)
from the Memory card. (page 42)
ꢀ On CDs with mixed content (Audio tracks, MP3/WMA files
and JPEG files), you can select among the Music-Audio CD
menu, Music-CD menu, and Photo-CD menu by pressing
TITLE repeatedly in Stop mode.
ꢀ If you are in a file list and want to return to the Folder list,
use the v/V to highlight
and press ENTER to return to
• When you select a folder.
the previous menu screen.
Open: Displays sub-folders and
Open
Delete
JPEG files in the folder.
Delete: Deletes the selected
folder(s) from the memory card.
(page 42)
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Photo Disc Operation (Continued)
Use v / V to select a copied folder then press B.
Still picture
4 “Copy” option is highlighted.
Use PAUSE/STEP (X) while showing a picture to pause
mode.
When “Copy” option is highlighted on the Copy
5 menu, press ENTER to begin copying.
Skip Images
While viewing a picture, press SKIP (. or >) once
otes
to advance to the next file or return to the previous file.
• If you select a folder on the disc to copy,
the sub-folders in the folder will not be copied.
• You must insert a memory card in the VCR/DVD
recorder to use this function.
Rotate Images
Use v / V while viewing a picture to flip the picture
clockwise or counterclockwise.
View Slide Shows
1. Select “Slide Show” option on the Photo-CD menu.
ip
You can create new album (folder). Select “New album”
option on the Copy menu then press ENTER.
“NONAME##” folder is created.
2. Press ENTER.
The Slide Show menu appears.
Slide Show
All
Object
Speed
Erasing JPEG file(s) or folder from the
Normal
M/C
Memory Card
Start
Cancel
1. Select an JPEG file or folder you wish to erase on
3. Use v V b B to set the options.
Object: Selected file or All files.
Speed: Sets the speed for Slide Show (Slow,
Normal, or Fast)
the Photo-Memory Card menu.
ip
Use the MARKER button to select multiple files.
4. Select the “Start” option then press ENTER to start
2. Press ENTER.
the Slide Show.
The menu options appear on the left side of the menu.
5. Press STOP to stop the Slide Show and returns to
the Photo-CD menu.
3. Select “Delete” option then press ENTER.
The confirm message for deleting will appear.
4. Use b / B to select “Yes” then press ENTER.
The selected file(s) or folder is deleted from the
Memory Card.
ote
Use the MARKER button to select multiple files.
Copying JPEG file(s) on the disc to
Notes on JPEG Recordings
JPEG
M/C
ꢀ Depending on the size and number of JPEG files, it
may take several minutes for the recorder to read the
disc’s content. If you don’t see an on-screen display
after several minutes, some of the files are too big —
reduce the resolution of the JPEG files to less than 4
mega pixels and burn another disc.
Memory Card
Use v / V to select an JPEG file or folder on the
Photo-CD menu.
1
Selecting multiple files
1. Select a JPEG file then press MARKER.
A check mark appears on the file. Press MARKER
again to cancel the marked file.
ꢀ The total number of files and folders are free but the
total number of files on the folder should be less than
999.
2. Repeat step 1 to mark additional files.
ꢀ Some discs may be incompatible due to different
recording formats or the condition of the discs.
Press ENTER.
2 The options appear on the left side of the menu.
ꢀ When you are using software such as “Easy CD
Creator” to burn JPEG files on a CD-R, ensure that all
selected files have the “.jpg” or “.jpeg” extension
before copying them into the CD layout.
Use v / V to select the “Copy” option then
3 press ENTER.
Copy menu will appear.
ꢀ If the files have “.jpe” extensions, please rename
Copy
them as “.jpg” or “.jpeg” files.
Select the album
C:\
Copy
ꢀ File names without the “.jpg” or “.jpeg” extension
cannot be read by this recorder, even though the files
are shown as JPEG image files in Windows
NONAME 01
NONAME 02
NONAME 03
Cancel
New album
®
Explorer .
42
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Mode Tape Playback
Preparation
Special Effect Playback
VHS
ꢀ Before using the Remote Control, press the VCR but-
ton to select the device to be operated.
ꢀ Turn the TV on and select the video input source con-
nected to the VCR/DVD Recorder.
Special effects playback notes
ꢀ Horizontal lines (noise bars) will appear on the TV screen.
This is normal.
ꢀ The audio is automatically muted during special effect modes,
so there is no sound during search.
ꢀ Audio system: Turn the audio system on and select
the input source connected to the VCR/DVD
Recorder.
ꢀ During the high-speed picture search modes, a short time is
needed to stabilize tape speed when re-entering the PLAY
mode. Slight interference may be observed during this time.
Normal Playback
VHS
Search
This function lets you visually search forward and back-
ward for a desired scene on your tape.
1 Press BACKWARD (m) or FORWARD (M)
during playback.
Insert a prerecorded video cassette.
1
The
indicator will light and the VCR/DVD Recorder
will power-up automatically.
The VCR/DVD Recorder will be activated in the
SEARCH mode.
ꢀ Make sure that the
indicator in the display
window is not on. If it is, press POWER once.
ꢀ If a tape without a safety tab is inserted, the VCR/DVD
Recorder will start playback automatically.
ꢀ If the VCR/DVD Recorder is left in the SEARCH mode for
more than 3 minutes, the VCR/DVD Recorder will auto-
matically enter the PLAY mode, to protect the tape and
video heads.
Press PLAY (N) once.
2 PLAY icon appears on the TV screen.
2 To return to playback, press PLAY (N).
ꢀ It is not necessary to select the tape speed for play-
back. It will be automatically selected by the VCR/DVD
Recorder.
Still Picture and Frame-by-Frame Playback
1 Press PAUSE/STEP (X) during playback.
A still picture appears on the TV screen.
ꢀ If a still picture vibrates vertically, stabilize it by using
CH/TRK (v/V) on the Remote Control.
ꢀ In playback, the TV/VCR selector switches to VCR
mode automatically.
Press STOP (x) to stop playback.
3 STOP icon appears on the TV screen.
ꢀ If the VCR/DVD Recorder is left in the STILL mode for
more than 5 minutes, the VCR/DVD Recorder will auto-
matically enter the STOP mode to protect the tape and
video heads.
If the tape reaches the end before STOP (x) is pressed,
the VCR/DVD Recorder will automatically stop, rewind
and eject the tape, and turn itself off.
2 Press PAUSE/STEP (X) repeatedly to advance the
video picture one frame at a time while viewing a still
picture.
Tracking Control VHS
Auto Tracking
3 To return to playback, press PLAY (N).
The automatic tracking function adjusts the picture to
Slow Motion
remove snow or streaks.
1 While in still mode, press FORWARD (M).
The tape will be played back at a speed 1/19 times
slower than the normal speed.
The AUTO TRACKING function works in the following
cases:
ꢀ A tape is played back for the first time.
ꢀ Tape speed (SP, LP, SLP) changes.
ꢀ Streaks or snow appear because of scratches on the tape.
ꢀ During slow playback, use CH/TRK (v/V) on the Remote
Control to minimize noise bands.
ꢀ If slow motion mode continues for more than 3 minutes,
the VCR/DVD Recorder will automatically change to nor-
mal play mode.
Manual Tracking
If noise appears on the screen during playback, press
either CH/TRK (v/V) on the Remote Control or
CH (v/V) on the front panel until the noise on the
screen is reduced.
2 To return to playback, press PLAY (N).
Counter Memory Function
This is useful if there is a section of tape you want to
view immediately after recording or if you want to return
to the same point several times.
ꢀ In case of vertical jitter, adjust these controls very carefully.
ꢀ Tracking is automatically reset to normal when the tape is
ejected or the power cord is unplugged for more than 3 sec-
onds.
1 Begin recording or playing a tape.
2 Press DISPLAY repeatedly to display the real-time
counter on the TV screen.
3 At the point you want to locate later, reset the real-
time counter to 0:00:00 by pressing CLEAR.
Continue to play or record.
4 Press STOP when recording or playback finishes.
5 Press RETURN (O).
The tape automatically stops when the tape counter
returns to about “0:00:00”.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Recording
Basic Recording from a TV
Instant Timer Recording
Follow the instructions below to record a TV program.
Recording starts immediately and continues until the disc or
tape is full or you stop the recording.
Instant Timer Recording allows you to make a recording
easily of a preset length without using the program
timer.
Follow steps 1-4 as shown left (Basic Recording
from a TV).
Press z REC repeatedly to select the recording
time length.
Recording starts after the first press.
DVD: Each subsequent press increases the recording
time by 10 minutes (maximum 360 minutes).
VCR: Each subsequent press increases the recording
time by 30 minutes (maximum 540 minutes). Please con-
firm the VHS tape has enough remaining time to be
recorded before recording.
Switch on the VCR/DVD Recorder, select the
device (VCR or DVD) for Recording and load a
recordable disc or tape.
Also make sure that the TV input is set to this recorder.
If you load a completely blank DVD RW disc, Disc initial-
ize menu will appear, to select a desired Recording Mode
to initialize the disc (See page 26).
1
2
1
Set a recording mode as necessary by pressing
REC MODE repeatedly.
DVD: XP (High quality), SP (Standard quality), LP
(Low quality), EP (Extend quality).
VCR: SP (Standard Play), SLP (Super Long Play)
2
DVD
Input: Ch.
6
00:09:05
SP
2H 01M Free
MONO
30min Rec.
Use CH (v/V) on the front panel or CH/TRK(v/V)
3
on the Remote Control to select the TV channel
to record.
VCR
Input: Ch.
6
MONO
SP
0:17:32
120min Rec
Use AUDIO to select the audio channel to
record.
Instant Timer Record Menu
4
The table below shows what will be recorded on the differ-
ent settings for different types of broadcast. The last col-
umn (Monitor Audio) shows what you’ll hear as it is
recording.
• If you set the audio channel to SAP, but there is no
SAP channel being broadcast, the main audio (mono or
stereo) will be recorded.
Checking the Recording Time
Press z REC or DISPLAY once to check the recording
time. The recalled setting will automatically return to the
TV screen for a moment.
Also, remaining time of recording is shown in the dis-
play window.
TV Broadcast
Selected Audio
Broadcast Audio Monitor
To Extend the Recording Time
The recording time can be extended anytime by press-
ing z REC.
Each subsequent press increases the recording time by
10 minutes (DVD) or 30 minutes (VCR).
L Ch
MONO
L
R Ch Audio
MONO
MONO
STEREO
Left
MONO MONO
STEREO
R
L
STEREO
Left
L
Right
R
R
Right
To Pause the Recording
1 Press PAUSE/STEP (X) to pause the disc during
MONO
MONO
SAP
MONO
MONO
SAP
L
MONO MONO
MONO MONO
MONO+SAP
recording.
SAP
R
SAP
2 When you want to continue recording, press
PAUSE/STEP (X) or z REC.
STEREO+SAP
STEREO
SAP
STEREO
SAP
SAP
MONO
SAP
MONO
MONO MONO
otes
• If you press PAUSE/STEP (X) during the Instant
Timer Recording, it will be canceled.
• The VCR/DVD Recorder will automatically power off
when the Instant Timer Recording ends.
Press z REC once.
Recording will start. (The REC indicator lights in the
display window.)
ꢀ Recording continues until you press STOP (x) or the
disc (or tape) is full.
5
To record one TV program while watching another
ꢀ To record for a fixed length of time, see Instant Timer
Recording on right.
1
Press TV/VCR to select the TV mode during recording.
The TV indicator appears.
6 Press STOP (x) to stop recording.
2 Using the TV, select the channel to be viewed.
ips (VCR mode only)
otes
Always use PAUSE/STEP (X) for best results when making
changes during recording .
For example: To change channels during recording, first press
PAUSE/STEP (X) to put the unit in pause mode. Then select
the desired channel on the VCR/DVD Recorder, and press
ꢀ The maximum number of DVD titles is
99 (DVD-R/RW) or 49 (DVD+R/RW).
ꢀ If the VCR/DVD Recorder is powered off during DVD
recording, the recording will not be saved.
PAUSE/STEP (X) again to resume recording.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Recording (Continued)
Dubbing from DVD to VCR
Dubbing from VCR to DVD
You can copy the contents of a DVD to a VHS tape
using the DUBBING (or DUB) button.
You can copy the contents of a VHS tape to a DVD R
or DVD RW using the DUBBING (DUB) button. This
allows you to archive your old VHS tapes to DVD.
ote
If the DVD (or Discs) you are attempting to copy is copy
protected, you will not be able to copy the disc. It is not
permitted to copy Macrovision encoded DVDs (or
Discs). “Copy-protected. Cannot record.” is displayed on
the TV screen.
ote
If the VHS video tape you are attempting to copy is
copy protected, you will not be able to copy the tape. It
is not permitted to copy Macrovision encoded tapes.
Insert a DVD R or DVD RW disc.
1
Insert a VHS Tape
Insert a blank VHS videotape into the VCR deck.
Insert a Disc
Insert a blank DVD R or DVD RW disc in the DVD
1
deck and close the disc tray.
ote
2 Insert the disc you wish to copy in the DVD deck
When using a DVD RW disc, you must initialize
before copying; see page 26.
Insert a VHS Tape
and close the disc tray.
Select DVD mode by pressing DVD on the
3 Remote Control or pressing DVD/VCR on the
front panel.
2 Insert the VHS video tape you wish to copy into the
VCR deck.
Find the place on the DVD (or Disc) from which
4 you want to start dubbing using the PLAY, FF,
REW and PAUSE functions.
Select VCR mode by pressing VCR on the
3 Remote Control or pressing DVD/VCR on the
front panel.
For best results, pause playback at the point from which
you want to record.
Find the place on the VHS tape from which you
4 want to start dubbing using the PLAY, FF, REW
and PAUSE functions.
Press the DUBBING button on the Remote
5 Control or DUB on the front panel.
The Dubbing menu appears.
For best results, pause playback at the point from which
you want to record.
Press the DUBBING button on the Remote
5 Control or DUB on the front panel.
The Dubbing menu appears.
Dubbing
55%
SP
Free Space
Rec. Mode
Dubbing
Dubbing
Stop
01H54M
SP
Free Space
Rec. Mode
Use v / V / b / B to select the desired Record
Dubbing
Stop
6 Mode:
• SP (Standard Play)
Use v / V / b / B to select the desired Record
• SLP (Super Long Play, 3 times SP).
6 Mode:
Select “Dubbing” then press ENTER or
DUBBING to start copying.
• EP (Extend Quality)
• LP (Low Quality)
• SP (Standard Quality)
• XP (High Quality)
7
ip
If you press PAUSE during Dubbing mode, both the DVD
and VCR decks go into Pause mode and the “DUB” indi-
cator blinks on the front panel display. While in Pause
mode, you can adjust the DVD playback position using
PLAY, REW, FF, PAUSE/STEP, etc. The VCR deck will
remain in Pause mode. To resume Dubbing, press the
DUBBING button twice.
Select “Dubbing” then press ENTER or
DUBBING to start copying.
7
ip
If you press PAUSE during Dubbing mode, both the DVD
and VCR decks go into Pause mode and the “DUB” indi-
cator blinks on the front panel display. While in Pause
mode, you can adjust the VCR playback position using
PLAY, REW, FF, PAUSE/STEP, etc. The DVD deck will
remain in Pause mode. To resume Dubbing, press the
DUBBING button twice.
Stop the Dubbing Process
8 To stop dubbing at any other time, press STOP (x).
You must stop the dubbing process manually when
the DVD movie ends, or the unit may replay and
record over and over again.
Stop the Dubbing Process
8 To stop dubbing at any other time, press STOP (x).
Dubbing will stop automatically when the VHS tape
ends.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer Recording
The Timer Recording function allows you to record up to
8 programs within a period of one month.
Checking Timer Recording Details
Programming can be checked whenever the VCR/DVD
Recorder is turned on. Press TIMER REC twice.
• Use v / V to select a timer recording.
Press TIMER REC.
The Timer Record menu will appear.
1
SP
198 min Free
Timer Record
• Press ENTER to edit the selected program.
Timer Record menu appears.
Media
Ch.
Date
Start Time End Time Mode
• Press CLEAR to delete the selected program
from the Timer Record List.
DVD
Ch.11
01/02 Fri
10:07 AM
11:00 AM
EP
OK
Timer Rec List
Close
TIMER REC
Timer Record List
Media Ch.
Date
Start Time Duration Mode
Check
• Media – Choose a media (DVD or VCR).
• Ch. – Choose a channel (2-69 or 1-125 for anten-
na or cable channels respectively, excluding skip
channels), or one of the external inputs from
which to record (AV1 or AV2).
Ch.11 10/19 Sun
18:07 AM
30min
SP
Rec. OK
• Date – Choose a date up to 1 month in advance,
or select a daily or weekly program.
• Start Time – Set the recording start time.
• End Time – Set the recording end time.
• Mode – Choose a record mode.
DVD: EP, LP, SP, XP, or AT (Auto)
Edit
CLEAR Delete
Timer Rec
Close
TIMER REC
Canceling a Timer Recording
You can clear a timer setting anytime before the record-
ing actually starts.
• Use v / V to select a program you want to erase on
the Timer Recorder List. If you want to erase the
program, press CLEAR.
VCR: SP, SLP, or AT (Auto)
AUTO mode determines how much time is avail-
able on the disc or tape and switches record
mode, if necessary, to complete recording the
program.
Enter the necessary information for your timer
recording(s).
• b / B (left/right) – Move the cursor left/right
• v / V (up/down) – Change the setting at the cur-
rent cursor position
• Press RETURN (O) to exit the Timer Record
menu.
• Press ENTER after filling in all the program infor-
mation.
2
Stopping a Timer Recording in Progress
After a timer recording has started, you can still cancel
the program.
• Press STOP.
Timer Recording Troubleshooting
Even though the timer is set, the recorder will not
record when:
• There is no disc (or tape) loaded.
• A non-recordable disc (or tape) is loaded.
• Disc Protect is set to ON in the Disc menu (see page 27).
• There are already 99 titles (DVD-RW, DVD-R), 49 titles
(DVD+RW, DVD+R) recorded on the disc.
• Press TIMER REC to display Timer Record List.
Press ENTER to save the program.
The Timer Record List will appear.
3
4
Press RETURN (O) to exit the Timer Record
List.
You cannot enter a timer program when:
• A recording is already underway.
• The time you’re trying to set has already passed.
• There are already 8 timer programs set.
5 Be sure to load a recordable disc or tape.
otes
If two or more timer programs overlap:
• The earlier program takes priority.
• When the earlier program finishes, the later program starts.
• If two programs are set to start at exactly the same time, the
program entered first takes priority.
• The Timer indicator lights on the front panel display.
• If the Disc and Tape indicator are blinking, either no disc
or tape is loaded, or the loaded disc is not recordable.
• The VCR/DVD Recorder will record the audio according
to the current TV tuner setting (Stereo, Mono or SAP).
Use the AUDIO button to set the audio before switching
the VCR/DVD Recorder to Standby mode.
• You must press STOP to stop the Timer Recording.
• The VCR/DVD Recorder will automatically power off
when the Timer Recording ends.
• There is a short delay when a timer recording finishes to
confirm the recorded program. If two timer recordings are
set to record sequentially (one right after the other), the
very beginning of the later program may not be recorded.
Confirmation is not possible when:
• Disc Protect setting is set to ON.
• There are already 99 titles (DVD-RW, DVD-R), 49 titles
(DVD+RW, DVD+R) recorded on the disc.
If the disc is damaged, the recording may not complete
successfully. In this case even though the Check field
shows “Rec. OK”, it may not be.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording from an External Input
Recording from External Components
Recording from a Digital Camcorder
You can record from an external component, such as a
camcorder or VCR, connected to any of the VCR/DVD
Recorder’s external inputs.
You can record from a digital camcorder connected to
the DV IN jack on the front panel of this VCR/DVD
Recorder. You can use the VCR/DVD Recorder’s
remote to control both the camcorder and the VCR/DVD
Recorder. Before recording, make sure that the audio
input for the DV IN jack is set up (see page 26).
Make sure that the component you want to
record from is connected properly to the
VCR/DVD Recorder. See page 19.
1
ips
Press INPUT repeatedly to select the external
2 input to record from.
• The source signal must be DVC-SD format.
• Some camcorders cannot be controlled using the
VCR/DVD Recorder remote.
• AV1: Audio/Video Input mounted on back panel
• AV2: Audio/Video Input mounted on front panel
• DV: DV Input mounted on front panel
• If you connect a second DVD recorder using a DV
cable, you cannot control the second recorder from
this one.
ote
• You cannot control the VCR/DVD Recorder remotely
from a component connected to the DV IN jack.
• You cannot record date and time information from a
DV cassette.
Check that the Audio In settings DV Record Audio are
as you want them. See page 23.
Load a recordable disc or tape.
3
Make sure your digital camcorder is connected
to the front panel DV IN jack. See page 19.
Set a recording mode as necessary by pressing
4 REC MODE repeatedly.
1
2
DVD: XP (High quality), SP (Standard quality), LP
(Low quality), EP (Extend quality).
Check that the DV audio input is as you require.
You can choose between Audio 1 (original audio) and
VCR: SP (Standard Play), SLP (Super Long Play)
Audio 2 (overdubbed audio).
• DV Input is set from the DV Record Audio in sub-menu
of the General menu. See DV Record Audio on page 26
for more information.
Press z REC once.
5 Recording will start. (The REC indicator lights in the
display window.)
Press INPUT repeatedly to select the DV input.
ꢀ Recording continues until you press STOP (x) or the
disc is full.
DV appears in the display window.
3
ꢀ To record for a fixed length of time, see Instant Timer
Recording on page 44.
Find the place on the camcorder tape from
4 which you want to start recording.
For best results, pause playback at the point from which
you want to record.
Press STOP (x) to stop recording.
6
• Depending on your camcorder, you can use this
VCR/DVD Recorder’s Remote Control to control the
camcorder using the STOP, PLAY and PAUSE func-
tions.
ote
If your source is copy-protected using CopyGuard, you will not
be able to record it using this recorder. See Copyright on page
10 for more details.
Press z REC once to start recording.
5
• Recording is automatically stopped if the recorder
detects no signal.
• You can pause or stop the recording by pressing
PAUSE/STEP or STOP. You cannot control the cam-
corder from this Remote Control during recording.
• In Video mode, the final frame of the recording may
remain displayed on screen for a while after recording
stops.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording from an External Input (Continued)
DV-Related Messages
What is DV?
You may see the following messages appear on your
TV screen when using the DV IN jack.
Using DV, also known as i.LINK, you can connect a
DV-equipped camcorder to this recorder using a single
DV cable for input and output of audio, video, data and
control signals.
The i.LINK interface is also known as IEEE 1394-1995.
“i.LINK” and the “i.LINK” logo are trademarks.
• This recorder is only compatible with DV-format
(DVC-SD) camcorders. Digital satellite tuners and
Digital VHS video recorders are not compatible.
• You cannot connect more than one DV camcorder at
a time to this recorder.
Not connected to Camcorder.
The camcorder is not connected properly, or the cam-
corder is switched off.
Too many devices connected.
The DV jack on this recorder supports connection to
just one camcorder.
Check the tape.
There is no cassette loaded into the connected equip-
ment.
• You cannot control this recorder from external equip-
ment connected via the DV IN jack (including two
DVD Recorders).
• It may not always be possible to control the connect-
ed camcorder via the DV IN jack.
Uncontrollable device.
The VCR/DVD Recorder cannot control the camcorder.
• Digital camcorders can usually record audio as stereo
16-bit/48kHz, or twin stereo tracks of 12-bit/32kHz.
The VCR/DVD Recorder can only record one stereo
audio track. Set DV Record Audio to Audio 1 or Audio
2 as necessary (see page 26).
Updating the Information.
Camcorder is updating information for DV.
Camera mode.
Camcorder is set to camera mode.
• Audio input to the DV IN jack should be 32 or 48kHz
(not 44.1kHz).
• Picture disturbance on the recording may occur if the
source component pauses playback or plays an
unrecorded section of tape, or if the power fails in the
source component, or the DV cable becomes discon-
nected.
• If DV Record Audio is set to Audio 2, but no Audio 2
signal is present, DV Record Audio will be reset to
Audio 1 automatically.
Troubleshooting
If you cannot get a picture and/or audio through the DV
IN jack, check the following:
• Make sure the DV cable is properly connected.
• Try switching off the connected equipment, then
switch it back on.
• Try switching the audio input.
otes
• Depending on the connected camcorder, you may not
be able to control it using the Remote Control sup-
plied with this VCR/DVD Recorder.
• Before you set the mode of your Camcorder to cam-
era mode, turn down the volume of connected Sound
device. There can be a howling sound.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Title List and Chapter List Menu
Press RETURN (O) repeatedly to exit the Title
VR
U
sing the Title List-Original menu
4 List-Original menu.
The Title List-Original is where you build and edit your
Playlist, and where you can delete titles and make other
changes to the Original content of the disc. You can
also play individual titles directly from the Title List-
Original menu.
ip
Press DISPLAY to display more detailed title information
for selected title.
Press LIST/DISC MENU repeatedly to display
the Title List-Original menu.
• Use the v/V buttons to display the previous/next
page if there are more than 6 titles or chapters.
• To exit the menu, press RETURN (O).
Using the Chapter List-Original menu
VR
1
Press LIST/DISC MENU repeatedly to display
Title List-Original menu.
1
1/4
Title List
Original
Use v V b B to choose the title you want to
2 view Chapter List-Original menu then press
ENTER.
DVD-VR
TITLE 1
10/12
TITLE 2
10/14
TITLE 3
10/16
57min
SP Free
0:25:20
0:5:12
0:2:34
Title List-Original options appears on the left side of
the menu.
TITLE 4
10/17
0:6:06
Use v / V to select “Chapter” from Title List-
3 Original options then press ENTER.
Chapter List-Original menu appears on the TV
screen.
Select
LIST Playlist
Close
DISPLAY Info.
ote
To switch between the Title List-Original and Title
List-Playlist menu, press LIST/DISC MENU repeat-
edly.
Chapter List
TITLE 1
Original
12/07/2004 Tue 0:25:20 TV 11
1/3
The Original and Playlist heading at the top of the
screen indicate which mode you are in.
To view Title List-Original options, select the
2 title you want then press ENTER.
Title List-Original options appears on the left side of
the menu.
Select
Playlist
Close
LIST
Use v / V to select an option then press ENTER
To view Chapter List-Original options, select the
4 chapter you want then press ENTER.
Chapter List-Original options appears on the left
side of the Chapter List-Original display.
3 to confirm.
Play: Start playback of the
Play
selected title.
Chapter
Chapter: Shows the Chapter
Use v / V to select an option then press ENTER
List-Original menu of the title
Delete
5 to confirm.
(Refer to right on this page).
Protect
Play: Starts playback of the
Delete: Deletes the title from the
Play
Title List-Original menu. (see
selected chapter.
Edit
page 56)
Title
Title: Shows the Title List-
Playlist Add
Protect: Protects accidental
Original menu (refer to left on
Delete
recording, editing or deleting of
this page)
Dubbing
the title. (page 58)
Combine
Delete: Deletes the chapter
Edit: Selects Edit options.
from the Chapter List-Original
Playlist Add
• Title Name: Edits the title name.
(page 57)
Title Name
Delete Part
menu. (page 56)
• Delete Part: Deletes a part of the
Title. (see page 56)
Combine: Merges two chapters
into one. (page 57)
Playlist Add: Adds the title to
Playlist Add: Adds the chapter
the Playlist. (see page 55)
to the Playlist. (page 55)
Dubbing: Copys the title to a
VHS tape.
Press RETURN (O) repeatedly to exit Chapter
6 List-Original menu.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Title List and Chapter List Menu (Continued)
VR
Using the Chapter List-Playlist Menu
Using the Title List-Playlist Menu
Press LIST/DISC MENU repeatedly to display
the Title List-Playlist menu.
• Use the v/V buttons to display the previous/next
page if there are more than 6 titles or chapters.
• To exit the Title List-Playlist, press RETURN
(O).
VR
1
Press DISC MENU/LIST repeatedly to display the
Title List-Playlist menu.
Use v V b B to choose the title you want to
2 view Title List-Playlist menu then press ENTER.
Title List-Playlist options appears on the left side of
the menu.
1
1/2
Title List
Playlist
Use v / V to select “Chapter” from Title List-
3 Playlist options then press ENTER.
Chapter List-Playlist menu appears on the TV
screen.
TITLE 1
10/12
TITLE 2
10/14
0:25:20
0:5:12
Chapter List
Playlist
TITLE 1
12/07/2004 Tue 0:25:20
Select
Original
Close
LIST
1/3
To view Title List-Playlist options, select the title
2 you want then press ENTER.
Title List-Playlist options appears on the left side of
the menu.
Select
Original
LIST
Close
Use v / V to select an option then press ENTER
3 to confirm.
To view Chapter List-Playlist options, select the
4 chapter you want then press ENTER.
Chapter List-Playlist options appears on the left
side of the menu.
Play: Start playback the select-
Play
ed title.
Chapter
Chapter: Shows the Chapter
List-Playlist menu of the title
Title Name
Delete
Use v / V to select an option then press ENTER
(Refer to right on this page).
5 to confirm.
Title Name: Edits the title
Play: Starts playback of the
selected chapter.
Delete Part
Dubbing
name. (page 57)
Play
Delete: Deletes the title from the
Title List-Playlist menu. (page
56)
Title: Shows the Title List-
Title
Playlist menu (Refer to left on
Delete
this page).
Delete Part: Deletes a part of
Move
Delete: Deletes the chapter from
the Title. (page 56)
the Chapter List-Playlist menu
Combine
Dubbing: Copys the title to a
(page 56).
VHS tape.
Move: Moves a chapter of
Chapter List-Playlist to a posi-
tion on the Chapter List-Playlist
menu (page 58)
Combine: Merges two chapters
into one (page 57).
Press RETURN (O) repeatedly to exit Title List-
4 Playlist menu.
Press RETURN (O) repeatedly to exit Chapter
6 List-Playlist menu.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Title List and Chapter List Menu (Continued)
Video
Video
Using the Title List menu
Deleting a Title
From the Title List display you can play, name and
erase titles.
Before a disc is finalized, you can erase titles recorded
on the disc.
Once a Video mode disc is finalized, the Title List
screen changes its appearance and all you can do is
select titles to play.
Caution
• If you erase a title from a DVD-R disc,the title will dis-
appear from the Title List, but the available recording
time will not increase.
Press LIST/DISC MENU to display the Title List.
1
• When erasing a title from a DVD-RW disc, the
remaining time available for recording will only
increase if it is the last title on the disc.
Title List
1/3
Title
Date
1/ 3
Duration
0:02:01
DVD VIDEO
TITLE 1
TITLE 2
TITLE 3
1/ 3
0:06:21
0:52:31
1hour 57min
4/ 12
SP
Free
Press LIST/DISC MENU to display Title List
1
Use v V b B to choose a title you want to erase
2 then press ENTER.
Select
DISPLAY Info.
Close
Title List options appears on the left side of the Title
List screen.
Use v / V to choose a title then press ENTER.
2 Title List options appears on the left side of the Title
List display.
Play
Use v / V to select an option then press ENTER
Title Name
Delete
Dubbing
3 to confirm.
Play: Start playback the select-
Play
ed title.
Title Name
Title Name: Edits the title name
(page 57).
Use v / V to select ‘Delete’ then press ENTER to
3 confirm.
Delete
The confirm message for deleting will appear.
Delete: Deletes the title from the
Dubbing
Title List.
Use b / B to select ‘Yes’ then press ENTER.
4 The selected title is deleted.
Dubbing: Copys the title to a
VHS tape.
After pressing ENTER, the new, updated menu is
displayed.
Press RETURN (O) repeatedly to exit Title List.
Repeat steps 2 - 4 to continue to delete from the
4
5 menu.
Press RETURN (O) to exit the menu.
6
ip
Press DISPLAY to display more detailed title information
for selected title.
If the disc has already been finalized
You will see a screen as shown below:
Indicates total and current page number
Disc name
Title list
DVD VIDEO
1/1
PAGE
UP
Moves to the next or
previous page
1
2
TITLE
TITLE
1
2
1/03 0:02:01
1/03 0:24:12
PAGE
DOWN
3
TITLE
3
1/03 0:36:30
EXIT
Exits the Title List screen.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Title List and Chapter List Menu (Continued)
+RW
Using the Title List menu
ip
Press DISPLAY to display more detailed title information
The Title List is where you can see the all recorded
titles, and where you can delete titles and make other
changes to the Original content of the disc. You can
also play titles directly from the Title List menu.
The recorder must be stopped in order to edit using the
Title List menu.
for selected title.
Caution
If you press z REC when the Title List menu
appears, the selected title is erased then overwrite
recording starts. (See page 60 for more details.)
Press LIST/DISC MENU to display the Title List
1
menu.
+RW
Using the Chapter List menu
• Use the v / V buttons to display the previous/
next page if there are more than 6 titles.
Press LIST/DISC MENU to display Title List
• To exit the Title List menu, press RETURN (O).
1
menu.
1/4
Use v V b B to choose the title you want to
2 view Chapter List menu then press ENTER.
Title List options appears on the left side of the
menu.
Title List
DVD+RW
TITLE 1
10/12
TITLE 2
10/14
TITLE 3
10/16
57min
SP Free
0:25:20
0:5:12
0:2:34
Use v / V to select “Chapter” from Title List
3 options then press ENTER.
TITLE 4
10/17
0:6:06
Chapter List menu appears on the TV screen.
Select
REC
Close
DISPLAY Info.
Chapter List
TITLE 1
12/07/2004 Tue 0:25:20
To view Title List options, select the title you
2 want then press ENTER.
SP
1/3
Title List options appears on the left side of the
menu.
Use v / V to select an option then press ENTER
3 to confirm.
Select
Close
Play: Starts playback the
Play
selected title except the hidden
To view Chapter List options, select the chapter
4 you want then press ENTER.
Chapter List options appears on the left side of the
menu.
chapters or titles.
Full Play
Full Play: Starts playback the
Chapter
selected title including the hid-
Delete
den chapters.
Use v / V to select an option then press ENTER
Chapter: Moves Chapter List
5 to confirm.
Protect
menu of the title. (refer to right
Play: Starts playback of the
selected chapter.
Title: Moves to Title List menu
of the chapter. (refer to left on
Edit
on this page)
Play
Dubbing
Delete: Deletes the title.
(page 56)
Protect: Protects accidental
recording, editing or deleting of
the title. (page 58)
Title
Combine
this page)
Hide (Show)
Combine: Combines two chap-
ters into one. (page 57)
Hide (Show): Hides (or Shows)
the selected chapter. (page 59)
Edit: Selects Edit options.
• Title Name: Edits the title
Title Name
name. (page 57)
Divide
• Divide: Divides one title into
Press RETURN (O) repeatedly to exit Chapter
two titles. (page 59)
Hide (Show)
6 List menu.
• Hide (Show): Hides (or
Shows) the title or all chapters
within the title. (page 59)
Dubbing: Copys the title to a
VHS tape.
Press RETURN (O) repeatedly to exit Title List
4 menu.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Title List and Chapter List Menu (Continued)
+R
Using the Title List menu
ip
Press DISPLAY to display more detailed title information
The Title List is where you build and edit your Playlist,
and where you can delete titles and make other
changes to the Original content of the disc. You can
also play individual titles directly from the Title List
menu.
for selected title.
+R
Using the Chapter List menu
Press LIST/DISC MENU repeatedly to display
Title List menu.
The recorder must be stopped in order to edit using the
1
Title List menu.
Use v V b B to choose the title you want to
2 view Chapter List menu then press ENTER.
Title List options appears on the left side of the Title
List display.
Press LIST/DISC MENU repeatedly to display
the Title List-Original menu.
1
• Use the v/V buttons to display the previous/next
page if there are more than 6 titles or chapters.
• To exit the menu, press RETURN (O).
Use v / V to select “Chapter” from Title List
3 options then press ENTER.
1/4
Title List
Chapter List menu appears on the TV screen.
DVD+R
TITLE 1
10/12
TITLE 2
10/14
TITLE 3
10/16
Chapter List
TITLE 1
2hour 57min
EP Free
0:25:20
0:5:12
0:2:34
12/07/2004 Tue 0:25:20
SP
1/3
Empty Title
--/-- 0:6:06
Select
Close
DISPLAY Info.
To view Title List options, select the title you
2 want then press ENTER.
Select
Close
Title List options appears on the left side of the Title
List display.
To view Chapter List options, select the chapter
4 you want then press ENTER.
Use v / V to select an option then press ENTER
3 to confirm.
Chapter List options appears on the left side of the
Chapter List display.
Play: Start playback of the
Play
selected title.
Use v / V to select an option then press ENTER
Full Play
5 to confirm.
Full Play: Starts playback the
selected title including the hid-
Chapter
Play: Starts playback of the
Play
den chapters.
selected chapter.
Delete
Chapter: Shows the Chapter
Title
Title: Shows the Title List menu
Protect
Edit
List menu of the title (Refer to
right on this page).
of the chapter (refer to left on
Combine
this page)
Delete: Deletes the title from the
Hide (Show)
Combine: Combines two chap-
Dubbing
Title List menu. (page 56)
ters into one. (page 57)
Protect: Protects accidental
recording, editing or deleting of
the title. (page 58)
Hide (Show): Hides (or Shows)
the selected chapter. (page 59)
Edit: Selects Edit options.
• Title Name: Edits the title name.
(page 57)
• Divide: Unavailabel (DVD+RW
only).
• Hide (Show): Hides (or Shows)
the all chapters within the title.
(page 59)
Press RETURN (O) repeatedly to exit Chapter
6 List menu.
Title Name
Divide
Hide (Show)
Dubbing: Copys the title to a
VHS tape.
Press RETURN (O) repeatedly to exit the Title
4 List menu.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Title and Chapter Editing
Edits you make to the Original content changes the
actual content of the disc. For example, if you delete a
title or chapter from the Original content (Title or
Chapter), that title or chapter is deleted from the disc,
freeing up extra recording time.
Adding Chapter Markers
Chapter
VR
+R
+RW
You can put a chapter marker anywhere in a title during
recording or playback.
When you edit the Playlist, on the other hand, you are
not changing the content of the disc. For example,
when you delete a title from the Playlist, you are just
telling the recorder not to play that title; nothing is actu-
ally deleted from the disc.
Once the chapter is marked, you can use the Chapter
Search feature, as well as Erase, combine and move
chapters in the Chapter List menu.
ote
Chapter markers are inserted at regular intervals auto-
matically. You can change this interval from the Initial
Setup menu (see Auto Chapter on page 26).
VR
Titles, Chapters and Parts
Titles in the disc’s original content contain one or more
chapters. When you insert a title into the Playlist, all the
chapters within that title also appear. In other words,
chapters in the Playlist behave exactly as chapters on a
DVD-Video disc do. Parts are sections of Original or
Playlist titles. From the Original and Playlist menu you
can add or delete parts. Adding a chapter or title to the
Playlist creates a new title made up of a section (ie.,
chapter) of an Original title. Deleting a part removes
part of a title from the Original or Playlist menu.
Play the title (Original or Playlist).
1
At the point you want to start a new chapter,
2 press CHP ADD.
A chapter marker icon appears on the TV screen.
• You can also put chapter markers during recording.
Changing Title Thumbnails
Caution
Thumb.
VR
+R
+RW
• When editing using the Delete, Add and Move func-
tions, the start and end frames may not be exactly as
set in the start and end point display.
Each title displayed in the Title List menu is represented
• During Playlist playback, you may notice a momen-
tary pause between edits. This is not a malfunction.
by a thumbnail picture taken from the start of that title or
chapter.
If you prefer, select a different still picture from within a
title.
Play the title (Original or Playlist).
1
Press THUMBNAIL to make the currently dis-
2 played picture the one that appears in the
Original or Playlist menu.
The still picture that you choose appears in both the
Original or Playlist menu.
ip
You can also change the thumbnail picture of the title on
the Chapter List-Original or Chapter List-Playlist menu.
Select a chapter on the Chapter List-Original or Chapter
List-Playlist menu then press THUMBNAIL. The thumb-
nail picture of the title that includes the chapter is
changed.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Title and Chapter Editing (Continued)
VR
Adding Additional Titles/Chapters to
Making a New Playlist
VR
the Playlist
Use this function to add an Original title or chapter to
the Playlist. When you do this, the whole title or chapter
is put into the Playlist (you can delete bits you don’t
need later — see Deleting a Title/Chapter on page 56).
You can add an Original title or chapter to add to a
Playlist title even if it is already registered.
Press LIST/DISC MENU repeatedly to display
1
Title List-Original menu.
The title appears in the Playlist complete with the chap-
ter markers that appear in the Original. However, if you
add more chapter markers to the Original later, these
are not automatically copied over into the Playlist title.
If you want to show the Chapter List-Original menu,
refer to “Using the Chapter List-Original ” on page
49.
Choose an Original title or chapter to put into
2 the Playlist, then press ENTER.
If you only want to add a chapter of a title, use the
Adding Additional Title/Chapter to the Playlist on this
page.
The Title List-Original or Chapter List-Original
options appear on the left side of the screen.
Press LIST/DISC MENU repeatedly to display
1
Title List-Original menu.
Play
If you want to display the Chapter List-Original
menu, refer to “Using the Chapter List-Original
menu” on page 49.
Chapter
Delete
Protect
Play
Title
Choose a title or chapter on the Original menu
2 to put into the Playlist, then press ENTER.
The Title List-Original or Chapter List-Original
options appear on the left side of the screen.
Edit
Delete
Playlist Add
Dubbing
Combine
Playlist Add
Chapter List-Original
Play
Title List-Original
Chapter
Use v / V to select ‘Playlist Add’ from the Title
3 List-Original or Chapter List-Original options
then press ENTER.
Delete
Play
Protect
Edit
Title
Delete
Playlist Add
Dubbing
Combine
Playlist Add
Select Playlist.
New Playlist
TITLE 1
Title List-Original
Chapter List-Original
Use v / V to select “Playlist Add” from the
3 Original (Title or Chapter) options then press
ENTER.
Choose a title that is already registered to insert
4 a title, then press ENTER.
Select Playlist.
New Playlist
The title appears in the updated Playlist menu.
Repeat steps 1-4 to continue adding to the
5 Playlist.
Press RETURN (O) repeatedly to exit the
6 menu.
Select ‘New Playlist’ then press ENTER.
4 The new title appears in the updated Playlist. All
chapters of the title are added to the Playlist.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Title and Chapter Editing (Continued)
Deleting a Title/Chapter
VR
Deleting a Part
VR
+RW
+R
You can delete a part which you do not want in the title.
Press LIST/DISC MENU repeatedly to display
When you erase a title or chapter from the Playlist
menu on DVD+R, DVD+RW or DVD-RW discs format-
ted in VR mode, you only remove it from the Playlist;
the title/chapter remains in the Original menu.
1
Title List-Original or Title List-Playlist menu.
Use v V b B to choose a title you want to
2 delete then press ENTER.
The options appears on the left side of the menu.
Select ‘Delete Part’ from the options on the
3 menu.
If you choose to delete a title or chapter from Title List
or Chapter List menu, the title or chapter is actually
deleted from the disc and the remaining time available
for recording increases. Titles/chapters deleted from the
Original are also removed from the Playlist.
e.g., If you select “Delete Part” on Title List-Original
menu.
Protect
ote
Edit
Title Name
Delete Part
It may not be possible to delete chapters that are less
Playlist Ad
Dubbing
than 5 seconds long.
On the Title List or Chapter List menu, use v V
b B to choose a chapter or title you want to
delete then press ENTER.
Options appears on the left side of the screen.
1
Press ENTER.
4 The Title Edit (Delete Part) menu appears on the
TV screen and the VCR/DVD Recorder goes into
Pause mode.
Select ‘Delete’ option on the options on the
The Start Point option is highlighted.
2 menu.
Play & Select the Start Point
Title Edit
e.g., If you select “Delete” on Title List-Original
menu.
-Delete Part
TITLE 2
10/14
0:34:12
Start
Play
Start Point
End Point
Cancel
Chapter
Delete
Protect
Edit
End
00:00:00
Move Point
Done
Select
Close
Use PLAY, PAUSE/STEP, FF, REW, and Slow
5 Motion playback to find the starting point.
The segment is indicated in yellow on the Progress Bar.
Press ENTER at the starting point of the seg-
6 ment you want to erase.
Playlist Add
Dubbing
The End Point option is highlighted.
Press ENTER to confirm.
Use PLAY, PAUSE/STEP, FF, REW, and Slow
3 The confirm message for deleting will appear.
7
Motion playback to find the ending point.
Press ENTER at the ending point of the section
8 you want to erase.
Use b / B to select “Yes” then press ENTER.
4 The selected chapter or title is deleted.
After pressing ENTER, the new, updated menu is
displayed.
The Done option is highlighted.
To cancel the Edit mode, select “Cancel” using v /
V then press ENTER.
Repeat steps 1- 4 to continue to delete from the
Press ENTER to delete the selected part.
9 When the confirm message appears, select “Yes”
5 menu.
using b / B then press ENTER.
Press RETURN (O) repeatedly to exit the
To erase additional segments, repeat steps 5-9.
6 menu.
When finished editing, press RETURN (O).
10 The Title List-Original or Title List-Playlist menu
appears.
ote
ote
When DVD+RW recording, the deleted title’s name is
changed to ‘Deleted Title’.
If you select “Cancel” then press ENTER, the VCR/DVD
Recorder will go to previous option and into Pause
mode.
If more than two titles are repeatedly deleted, the titles
are combined into one.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Title and Chapter Editing (Continued)
VR
Video
+RW
+R
Combining Two Chapters Into One
Naming a Title
VR
+RW
+R
You can name Original and Playlist titles independently.
Use this function to combine two adjacent Playlist or
Original chapters into one.
On the Title List menu, use v V b B to choose
the title you want to name then press ENTER.
Options appears on the left side of the menu.
1
On the Chapter List menu, select the second
chapter of the two chapters you want to com-
bine then press ENTER.
1
Use v/V to select “Title Name” option then
2 press ENTER.
Chapter List options appears on the left side of the
The Keyboard menu appears.
menu.
e.g., If you select “Title Name” on Title List-Original
e.g., If you select “Combine” on Chapter List-
Original menu.
menu.
Protect
Play
Edit
Title Name
Delete Part
Title
Playlist Add
Dubbing
Delete
Combine
Playlist Add
Enter a name for the title. Use v V b B to select
3 a character then press ENTER to confirm your
selection. Refer step 5 as shown on page 28
(Disc Label).
Use v / V to select “Combine” option then
3 press ENTER.
After pressing ENTER, the new, updated menu is
displayed.
Repeat steps 1 - 3 to continue to combine from
4 the menu.
TITLE 2
Language
English/Latin Capital
1
A
K
U
2
B
L
V
3
C
4
D
N
X
5
E
O
Y
6
F
P
Z
7
8
H
R
9
I
0
J
T
Press RETURN (O) repeatedly to exit the
G
Q
5 menu.
M
W
S
ote
Space Delete
OK
Cancel
This function cannot operate listed as below;
• If there is only one chapter within the title.
• If two chapters created by erasing a part from an
original title.
Choose OK then press ENTER to save the name
4 and return to the previous menu screen.
• If two chapters created from different titles.
• If two chapters created by moving an order from an
original title.
Press RETURN (O) repeatedly to exit the
5 menu.
otes
• Names can be up to 32 characters long.
• For discs formatted on a different DVD Recorder, you
will see only a limited character set.
• When recording in DVD-R, DVD+R or DVD+RW, the
entered name is displayed on the DVD player only
after finalizing.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Title and Chapter Editing (Continued)
VR
VR
+RW
+R
Moving a Playlist Chapter
Protect a Title
Use this function to re-arrange the playing order of
Playlist chapters on the Title List-Playlist menu.
Use this function to protect accidental recording, editing
or deleting of the title.
Press LIST/DISC MENU repeatedly to display
Title List-Playlist menu.
Press LIST/DISC MENU to display Title List
menu.
1
1
To display the Chapter List-Playlist menu, refer to
Use v V b B to choose a title you want to
2 protect then press ENTER.
“Using the Chapter List-Playlist” on page 50.
Options appears on the left side of the screen.
ote
Select “Protect” option on the options.
This function is not available if there is only one chapter.
3
Chapter List
Playlist
TITLE 1
12/07/2004 Tue 0:25:20
e.g., If you select “Protect” on Title List-Original
menu.
1/3
Play
Chapter
Delete
Select
Original
Close
LIST
Protect
Edit
Select a chapter from the Chapter List-Playlist
2 menu.
Playlist Add
Dubbing
Press ENTER.
3 Chapter List-Playlist options appears on the left
side of the screen.
Press ENTER to confirm.
4 The lock mark will appears on the title’s thumbnail.
Play
Title
ip
Delete
Move
If you select a title that has already been protected on
the Title List menu, you can ‘unprotect’ it by choosing
“Unprotect” from the Title List menu options. After doing
this, you can edit and/or delete the title.
Combine
Use v / V to select “Move” from Playlist
4 options then press ENTER.
Use v V b B to choose the place you want to
5 move the chapter to then press ENTER.
After pressing ENTER, the new, updated menu is
displayed.
Repeat steps 2 - 5 to continue to move from the
6 menu.
Press RETURN (O) repeatedly to exit the
menu.
7
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Title and Chapter Editing (Continued)
+RW
+R
+RW
Hide a Title/Chapter
Divide One Title Into Two
Use this function to hide a title/chapter on the Title List
or Chapter List menu.
Use this command to split a title up into two new titles.
On the Title List menu, select a title you want to
1
On the Title List or Chapter List menu,
use v V b B to choose a title or chapter you
want to hide then press ENTER.
Options appears on the left side of the screen.
divide then press ENTER.
1
The menu options appears on the left side of the
screen.
Play
Select ‘Hide’ option on the options.
Full Play
Chapter
Delete
2
e.g., If you select “Hide” on Title List menu.
Play
Protect
Edit
Title Name
Divide
Full Play
Chapter
Delete
Dubbing
Hide
Protect
Edit
Title Name
Divide
Select “Divide” from the Title List menu options
2 and press ENTER.
Title Edit-Divide menu appears and goes into STOP
mode. “Divide” option is highlighted.
Dubbing
Hide
Current picture
Press ENTER to confirm.
3 The title’s thumbnail will be dim.
Title Edit
-Divide
TITLE 2
12/07
The first title’s
12:00:00
ip
thumbnail
If you select a title that has already been dim on the
Title List menu, you can ‘show’ it by choosing “Show”
from the Title List menu options. After doing this, you
can see the title.
#1 Thumbnail
The second title’s
thumbnail
Divide
Cancel
Done
00:00:00
Move Point
Select
Close
Use PLAY, PAUSE/STEP, FF, REW, and Slow
3 Motion playback to find the dividing point.
The segment is indicated in yellow on the Progress Bar.
Press ENTER at the point of the section you
4 want to divide the title.
The Done option is selected.
To cancel the dividing point, select “Cancel” using v
/ V then press ENTER.
Press ENTER to fix the dividing point.
5 The title is divided into two new titles. It take up to
4 minutes to divide.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Title and Chapter Editing (Continued)
Video
VR
+RW
Viewing Title List menu displayed
Clean-up Recording
You can simply clean-up (erase) all contents on the disc on other DVD recorders or players
then start recording from the first section of the disc.
+RW
+R
The disc format is not changed.
Switch on the recorder and load a recordable
disc.
You can view the Title List menu displayed on the
another DVD player that is capable of playing DVD+RW
or DVD+R discs.
1
Press and hold z REC button for more than 3
2 seconds in Tuner mode.
Insert DVD+R or DVD+RW disc recorded
The message will appears on the TV screen.
1
already.
Delete all titles and record?
Press TITLE.
2 Title List menu will appear as below.
Yes
No
Use b / B to select “Yes” then press ENTER.
3 Recording will start. (The REC indicator lights in
the display window.)
ip
You can remove the Title List menu by pressing
STOP (x).
DVD+RW
Title List
+RW
Overwrite Recording
TITLE 1
10/12
TITLE 2
10/14
TITLE 3
10/16
To overwrite a new video recording to a previously
recorded title, follow these steps. This feature is not
available on DVD+R, which always record at the end of
the Disc.
0:25:20
0:6:06
0:5:12
0:6:06
0:2:34
0:6:06
TITLE 4
10/17
TITLE 5
10/17
TITLE 6
10/17
1/2
Select input source you want to record (chan-
1
nel, AV1-2, DV).
To play back a title, select the title you want
Press LIST/DISC MENU to display the Title List
3 then press ENTER or N (PLAY).
2 menu.
1/4
Playing Your Recordings on
Title List
DVD+RW
Other DVD Players (Finalizing a Disc)
TITLE 1
10/12
TITLE 2
10/14
TITLE 3
10/16
57min
SP Free
0:25:20
0:5:12
0:2:34
Most regular DVD players can play finalized discs
recorded in Video mode, finalized DVD+R or DVD+RW.
A small number of players can also play DVD-RW discs
recorded in VR mode, finalized or not. Check the manu-
al that came with the other player to check what kinds
of discs it will play.
TITLE 4
10/17
0:6:06
Select
REC
Close
DISPLAY Info.
Use v V b B to choose a title you want to over-
3 write.
Finalizing ‘fixes’ the recordings and editings in place so
that the disc can be played on a regular DVD player or
computer equipped with a suitable DVD-ROM drive.
Finalizing a Video mode disc creates a menu screen for
navigating the disc. This is accessed by pressing
LIST/DISC MENU or TITLE.
Press z REC to start overwrite recording.
4 Overwrite recording is started from the start point of
the title.
Press STOP (x) to stop the overwrite recording.
5 The new title is created and updated menu is dis-
played.
To finalize a disc, refer to “Disc Finalize” on page 27.
otes
otes
ꢀ This function is not available with a protected title.
ꢀ If the overwriting is elapsed more than the recording
length of the current title, the next title is overwriten.
But if next title is protected, the overwriting is stopped
at the starting point of the title.
ꢀ Unfinalized DVD+RW is playable on regular DVD
players.
ꢀ The edited contents of DVD+RW disc is compatible
on regular DVD players only after finalizing.
ꢀ Any edited contents of the DVD+R disc are not be
compatible on regular DVD players. (Hide, chapter
combine, added chapter mark, etc.)
ꢀ If the selected title’s recording length is less than 10
seconds, the next title is overwriten. But if next title is
protected, the overwriting is impossible.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling Your TV with the Supplied Remote
You can control the sound level, input source, and
power switch of your LG TV with the supplied remote.
Code numbers of controllable TVs
If more than one code number is listed, try entering
them one at a time until you find the one that works with
your TV.
You can control your TV using the buttons below.
Manufacturer
ADMIRAL
AIWA
Code Number
Manufacturer
MONTGOMERY
WARD
Code Number
01,06,08,09
23,24,32,33,34
01,08
16,33,37,44,45
70
01
AKAI
NEC
AMARK
09
NOBLEX
07
AOC
01
33
18,19
51
07
08
43
49,50,51,52,53,54,55
09
09
01,03,08,33,35,37,44
16,38,39,40,41,42,43
01,08
01,09,16,17,18,19
28,29
PACKARD BELL
PANASONIC
PHILCO
43
BELL & HOWELL
BROKSONIC
CANDLE
07,11,13,25,35,36
01,06,07,08,09,
15,38,43,58
06,07,43,61,62,65
30
09
03,37,44
11,13
16,17,23
01,03,37,44,69
16,17,23
08
01,08,09,25,68
28,29
TV Control
Buttons
CCE
PHILIPS
CENTURION
CINERAL
CITIZEN
CORONADO
CROWN
CURTIS MATHES
DAEWOO
DAYTRON
EMERSON
FISHER
PIONEER
PORTLAND
PROSCAN
QUASAR
RADIO SHACK
RCA
REALISTIC
SAMPO
SAMSUNG
SANYO
FUNAI
46,47
SCOTT
01,08
GENERAL ELECTRIC 03,10,11,13,37,44
SEARS
SEMP
SHARP
SIGNATURE 2000
09,25,26,27,28,29
64
09,22,23,24,60,66
01,06,08,09,10,
23,24,33,34
12,62
GRADIENTE
HITACHI
JC PENNEY
JVC
01,56,57,63,67
09,14,15,43
01,08,10,27,35
20,21,63,67
43
KIOTE
SONY
KMC
KTV
LG (GOLDSTAR)
LODGENET
LOGIK
09
SOUNDESIGN
SYLVANIA
51
01,08,09,31
01,07,08,09,35,39,40
33
01,04,05,06,07,
08,35,51
46,47
By pressing
POWER
INPUT
You can
Turn the TV on or off.
SYMPHONIC
TATUNG
TEKNIKA
TELERENT
THOMSON
YORX
TOSHIBA
WARDS
XR1000
33
11
Switch the TV’s input source
between the TV and other input
sources.
LXI
MAGNAVOX
09,24,25,26,27,28,29
01,02,04,05,06,
07,08,09,20,
34,35,43,51,61,62,65
33
07,09,16,33,51
09,33
69
08
CH +/–
Scans up or down through
MAJESTIC
MARANTZ
MEMOREX
01,25,26,27,64
01,06,08,09,10,33,34
48
01,32
33
memorized channels.
VOL +/–
MUTE
Adjust the volume of the TV.
Turns on or off TV sound.
MGA/MITSUBISHI
01,08,32,34
ZENITH
01, 02,33,59
otes
ote
ꢀ Depending on your TV, some or all buttons may
not function on the TV, even after entering the
correct manufacturer code.
Depending on the unit being connected, you may not be
able to control your TV using some of the buttons.
ꢀ If you enter a new code number, the code number
previously entered will be erased.
ꢀ When you replace the batteries of the remote, the
code number you have set may be reset to the
default setting. Set the appropriate code number
again.
Controlling other TVs with the remote
You can control the sound level, input source, and
power switch of non-LG TVs as well. If your TV is listed
in the table below, set the appropriate manufacturer
code.
1. While holding down TV POWER button, press
the number buttons to select the manufacturer
code for your TV (Refer to table on the right col-
umn).
2. Release TV POWER button.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Code and Country Code List
Language Codes
Use this list to input your desired language for the following initial settings:
Disc Audio, Disc Subtitle, Disc Menu.
Language
Abkhazian
Afar
Code
6566
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
7577
6765
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
Language
Fiji
Code
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language
Lingala
Code
7678
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
8185
Language
Singhalese
Slovak
Slovenian
Somali
Spanish
Sudanese
Swahili
Swedish
Tagalog
Tajik
Code
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Finnish
Lithuanian
Macedonian
Malagasy
Malay
Afrikaans
Albanian
Ameharic
Arabic
French
Frisian
Galician
Georgian
German
Greek
Malayalam
Maltese
Armenian
Assamese
Aymara
Maori
Greenlandic
Guarani
Gujarati
Hausa
Marathi
Azerbaijani
Bashkir
Moldavian
Mongolian
Nauru
Tamil
Basque
Tatar
Bengali; Bangla
Bhutani
Hebrew
Hindi
Nepali
Telugu
Thai
Norwegian
Oriya
Bihari
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Tibetan
Tigrinya
Tonga
Breton
Panjabi
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Pashto, Pushto
Persian
Turkish
Turkmen
Twi
Polish
Italian
Portuguese
Quechua
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
Ukrainian
Urdu
Chinese
Corsican
Croatian
Czech
Rhaeto-Romance 8277
Rumanian
Russian
8279
8285
8377
8365
7168
8382
8372
8378
8368
Uzbek
Vietnamese
Volapük
Welsh
Samoan
Danish
Sanskrit
Dutch
Korean
Scots Gaelic
Serbian
Wolof
English
Kurdish
Laothian
Latin
Xhosa
Esperanto
Estonian
Faroese
Serbo-Croatian
Shona
Yiddish
Yoruba
Zulu
Latvian, Lettish
Sindhi
Country Codes
Choose a country code from this list.
Country
Afghanistan
Argentina
Australia
Austria
Code
Country
Ethiopia
Fiji
Code
ET
FJ
Country
Malaysia
Maldives
Mexico
Code
MY
MV
MX
MC
MN
MA
NP
Country
Saudi Arabia
Senegal
Code
SA
SN
SG
SK
SI
AF
AR
AU
AT
Finland
France
FI
Singapore
Slovak Republic
Slovenia
FR
DE
GB
GR
GL
HM
HK
HU
IN
Monaco
Mongolia
Morocco
Nepal
Belgium
Bhutan
BE
BT
Germany
Great Britain
Greece
Greenland
Islands
Hong Kong
Hungary
India
South Africa
South Korea
Spain
ZA
Bolivia
Brazil
BO
BR
KH
CA
CL
KR
ES
LK
Netherlands
NL
Cambodia
Canada
Chile
Netherlands Antilles AN
Sri Lanka
Sweden
New Zealand
Nigeria
NZ
NG
NO
OM
PK
PA
PY
PH
PL
PT
RO
SE
CH
TW
TH
TR
UG
UA
US
UY
UZ
VN
ZW
Switzerland
Taiwan
China
CN
CO
CG
CR
HR
CZ
DK
EC
EG
SV
Norway
Oman
Colombia
Congo
Indonesia
Israel
ID
Thailand
IL
Pakistan
Panama
Paraguay
Philippines
Poland
Turkey
Costa Rica
Croatia
Italy
IT
Uganda
Jamaica
Japan
JM
JP
Ukraine
Czech Republic
Denmark
Ecuador
Egypt
United States
Uruguay
Kenya
KE
KW
LY
Kuwait
Portugal
Romania
Russian Federation RU
Uzbekistan
Vietnam
Libya
El Salvador
Luxembourg
LU
Zimbabwe
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Check the following guide for the possible cause of a problem before contacting service.
Cause
Solution
Symptom
ꢀ The power cord is disconnected.
ꢀ Plug the power cord into the wall outlet
securely.
No power.
ꢀ The TV is not set to receive VCR/DVD
ꢀ Select the appropriate video input on the TV
so the picture from the VCR/DVD Recorder
appears on the TV screen.
ꢀ Connect the video cable securely.
ꢀ Turn on the TV.
ꢀ Select the correct input mode on the audio
receiver so you can listen to the sound from
the VCR/DVD Recorder.
No picture.
No sound.
Recorder signal output.
ꢀ The video cable is not connected securely.
ꢀ The TV power is turned off.
ꢀ The equipment connected with the audio
cable is not set to receive VCR/DVD
Recorder signal output.
ꢀ The audio cables are not connected securely. ꢀ Connect the audio cable securely.
ꢀ The power of the equipment connected with
the audio cable is turned off.
ꢀ Turn on the equipment connected with the
audio cable.
ꢀ The audio connecting cord is damaged.
ꢀ The disc is dirty.
ꢀ Replace it with a new one.
ꢀ Clean the disc.
Playback picture is poor.
ꢀ Tape heads are dirty.
ꢀ Clean video heads.
ꢀ Tape is a rental or was recorded on another
VCR.
ꢀ Use v/V for manual tracking adjustment while
tape is playing.
ꢀ No disc is inserted.
ꢀ No tape is inserted.
ꢀ Insert a disc or tape. (Check that the disc
indicator on the front panel display is lit.)
VCR/DVD Recorder does
not start playback.
ꢀ An unplayable disc is inserted.
ꢀ Insert a playable disc. (Check the disc type,
color system, and regional code.)
ꢀ The disc is placed upside down.
ꢀ Place the disc with the playback side down.
ꢀ The disc is not placed within the guide.
ꢀ Place the disc on the disc tray correctly inside
the guide.
ꢀ The disc is dirty.
ꢀ Clean the disc.
ꢀ The Movie Rating level is set.
ꢀ Cancel the Movie Rating function or change
the rating level.
ꢀ The video signal from the external compo-
nent is copy-protected.
ꢀ You cannot connect via the VCR/DVD
Recorder. Connect the component directly to
your TV.
Picture from external input
is distorted
ꢀ The skipped channels were deleted with the
CH. Add/Del feature.
ꢀ Use the CH. Add/Del feature to restore chan-
nels. See “To Add or Erase Channels from
Memory” on page 21.
Some channels are
skipped over when using
CH (v / V)
ꢀ Antenna or cables are loose.
ꢀ Tighten connections or replace cable.
Picture or sound of
ꢀ Wrong Tuning Band is selected in the
VCR/DVD Recorder Setup menu.
ꢀ Try “Tuning Band Select” options; see page
20 for details.
broadcasting channel is
weak or missing.
ꢀ Camcorder is off.
ꢀ Turn camcorder on and operate
properly.
Camcorder image not
shown.
ꢀ VCR/DVD Recorder’s source is not set to
AV1, AV2 or DV IN.
ꢀ Use INPUT to select AV input channel (AV1,
AV2 or DV IN).
Camcorder image via A/V
input or DV IN to
VCR/DVD Recorder is not
shown on TV screen.
ꢀ The disc was recorded in Video mode.
ꢀ Some players will not play even a finalized
disc recorded in Video mode.
ꢀ Finalize the disc; see page 27.
ꢀ No solution.
Can’t play disc recorded
on this VCR/DVD
Recorder on another DVD
player.
ꢀ The disc was recorded in VR mode.
ꢀ The other player must be RW compatible in
order to play it.
ꢀ Discs recorded with copy-once material can-
not be played on other players.
ꢀ No solution.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting (Continued)
Cause
Solution
Symptom
ꢀ The remaining blank space on the disc is
insufficient.
ꢀ Use another disc.
Cannot record or did not
record successfully.
ꢀ The source you are trying to record is copy-
protected.
ꢀ You cannot record the source.
ꢀ When setting the recording channel, the
channel is tuned on the TV’s own tuner.
ꢀ Select the channel on the VCR/DVD
Recorder’s built-in TV tuner.
ꢀ When recording to a Video mode disc, pro-
grams that are copy-once protected cannot
be recorded.
ꢀ Clock in VCR/DVD Recorder is not set to
correct time.
ꢀ Use a VR mode formatted disc for copy-once
material.
Timer Recording not possi-
ble.
ꢀ Set clock to correct time. See “Auto Clock
Set” or “Manual Clock Set” on page 21.
ꢀ Timer has been programmed
incorrectly.
ꢀ Reprogram Timer. See “Timer Recording” on
page 46.
ꢀ TIMER indicator light does not appear after
programming timer.
ꢀ Reprogram Timer.
Stereo Audio Record
and/or Playback not pres-
ent.
ꢀ TV is not Stereo-compatible.
ꢀ Broadcast program is not in stereo format.
ꢀ VCR/DVD Recorder A/V Out jacks are not
connected to TV A/V In jacks.
ꢀ No solution.
ꢀ No solution.
ꢀ
Make A/V connections. Stereo is available
only via A/V output from VCR/DVD Recorder
.
ꢀ VCR/DVD Recorder Audio/Video Out is not
selected for viewing at the TV.
ꢀ Select AUX or A/V source as TV input.
ꢀ VCR/DVD Recorder’s TV audio channel is
set to SAP or MONO.
ꢀ Set TV audio channel mode to Stereo. See
“Changing TV Audio Channel” on page 29.
ꢀ The Remote Control is not pointed at the
remote sensor of the VCR/DVD Recorder.
ꢀ Point the Remote Control at the remote sen-
sor of the VCR/DVD Recorder.
Remote control does not
work properly.
ꢀ The Remote Control is too far from the
VCR/DVD Recorder.
ꢀ Operate the Remote Control
within 23 ft (7 m).
ꢀ There is an obstacle in the path of the
Remote Control and the VCR/DVD Recorder.
ꢀ Remove the obstacle.
ꢀ The batteries in the Remote Control are
weak or dead.
ꢀ Replace the batteries with new ones.
Reset the VCR/DVD Recorder
If you observe any of the following symptoms...
ꢀ
ꢀ
ꢀ
When the VCR/DVD Recorder is plugged in, but the power will not turn on or off.
When the display window does not working.
When the VCR/DVD Recorder does not operate normally.
You can reset the VCR/DVD Recorder as follows :
ꢀ
Press and hold the POWER button for more than five seconds. This will force the VCR/DVD Recorder to power off. .
Press the POWER button again to turn the VCR/DVD Recorder back on.
Unplug the power cord and then plug the power cord again after more than five seconds.
ꢀ
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
General
Power requirements
AC 120V, 60 Hz
Power consumption
Dimensions (approx.)
Mass (approx.)
35W
430 X 78.5 X 354 mm (16.9 x 3.1 x 13.9 inches) (w x h x d)
5.6 kg (12.32 lbs)
5˚C to 35˚C (41˚F to 95˚F)
5 % to 90 %
Operating temperature
Operating humidity
Signal system
NTSC
Recording
Recording format
Recordable discs
Recordable time
DVD VideoRecording, DVD-VIDEO
DVD-ReWritable, DVD-Recordable, DVD+ReWritable, DVD+Recordable
DVD ; Approx. 1 hour (XP mode), 2 hours (SP mode),
4 hours (LP mode), 6 hours (EP mode)
VCR ; SP: 2 HOURS (T-120), SLP: 6 HOURS (T-120)/8 HOURS (T-160)
Video recording format
Sampling frequency
Compression format
Audio recording format
Sampling frequency
Compression format
27MHz
MPEG 2
48kHz, 96kHz
Dolby Digital
VCR Specifications
Head system
Timer
Four head helical scan azimuth system
12-hour display type with AM, PM
Tape speed
SP: 33.35 mm/sec, LP: 16.67 mm/sec, SLP: 11.12 mm/sec
Tape width
12.7 mm
Rewind time
About 65 seconds (T-120)
Antenna
75 ohms (VHF/UHF)
VHF output signal
Channel coverage
Frequency range
Signal-to-noise ratio
Dynamic range
Channel separation
Channel 3 or 4 (Switchable)
VHF: 2-13, UHF: 14-69, CATV: 1-125 (4A, A-W, W+1 - W+84, A-5 - A-1)
20Hz to 20kHz
43dB
88 dB
60 dB
DVD Specifications
Laser system
Frequency response
Signal-to-noise ratio
Harmonic distortion
Dynamic range
Semiconductor laser, wavelength 650 nm
DVD (PCM 48 kHz): 8 Hz to 22 kHz, CD: 8 Hz to 20 kHz
More than 95dB
Less than 0.008%
More than 90 dB
Inputs
ANTENNA IN
VIDEO IN (AV1,2)
AUDIO IN (AV1,2)
S-VIDEO IN
Antenna or CATV input, 75 ohms
1.0 Vp-p 75 ohms, sync negative, RCA jack x 2
-6 dBm more than 47 kohms, RCA jack (L, R) x 2
(Y) 1.0 V (p-p), 75 Ω, negative sync, Mini DIN 4-pin x 1
(C) 0.286 V (p-p) 75 Ω
DV IN
4 pin (i.LINK/IEEE 1394 standard)
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications (Continued)
Outputs
VIDEO OUT
1 Vp-p 75 Ω, sync negative, RCA jack x 1
S-VIDEO OUT
(Y) 1.0 V (p-p), 75 Ω, negative sync, Mini DIN 4-pin x 1
(C) 0.286 V (p-p) 75 Ω
COMPONENT VIDEO OUT
(PROGRESSIVE SCAN)
Audio output (digital audio)
Audio output (optical audio)
Audio output (analog audio)
RF OUT
(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
0.5 V (p-p), 75 Ω, RCA jack x 1
Optical connector x 1
1.1 Vrms (1 kHz, -6 dB), 600 Ω, RCA jack (L, R) x 2
Channel 3 or 4 (Switchable)
Accessory:
Video cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
RF 75-ohm Coaxial Cable . . . . . . . . . . . . . . . . . .1
Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Audio cable . . . . . . . . . . . . . . . . . . . . .1
Remote control . . . . . . . . . . . . . . . . . .1
ꢀ Design and specifications are subject to change without notice.
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby
Laboratories.
DTS and DTS Digital Out are registered trademarks of Digital Theater Systems, Inc.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
LG Electronics, Inc.
Limited Warranty - USA
This LG Electronics product, will be repaired or replaced, at LG’s option, if it proves to be defective in material or
workmanship, under normal use, during the warranty period (“Warranty Period”) listed below, effective from the date
(“Date of Purchase”) of original consumer purchase of the product. This warranty is good only to the original pur-
chaser of the product and effective only when used in the United States, excluding U.S. Territories.
WARRANTY PERIOD:
HOW SERVICE IS HANDLED:
LABOR: 90 days from the Date of Purchase.
Call 1-800-243-0000 for instructions on getting the
defective unit repaired or replaced.
PARTS: One Year from the Date of Purchase.
Please retain dated sales receipt and your box to
return the unit to LG for repair or replacement.
* Parts replaced are warranted for the remaining portion
of the original warranty period.
Shipping both ways will be paid by LG during the
Warranty Period. After the Warranty Period, you pay
inbound shipping charges and LG pays return shipping
charges.
Visit our website at: http://www.lgservice.com
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED
WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. LG ELEC-
TRONICS WILL NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL OR PUNITIVE DAMAGES
OF ANY NATURE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INCLUDING WITHOUT LIMITATION, LOST
REVENUES OR PROFITS, LOST OR CORRUPTED PROGRAMMING OR DATA, OR ANY OTHER DAMAGE WHETHER BASED
IN CONTRACT, TORT OR OTHERWISE. Some states do not allow the exclusion or limitation of incidental or consequential dam-
ages or limitation on how long an implied warranty lasts, so the above exclusion or limitation may not apply to you. This warranty
gives you specific legal rights and you may also have other rights that may vary from state to state.
THIS LIMITED WARRANTY DOES NOT APPLY TO:
•
Damages or operating problems that result from shipping, installation, adjustment of user controls, calibration,
maintenance or failure to maintain, or separate system components; and
Damages or operating problems that result from normal wear and tear, misuse, abuse, operation outside
environmental specifications or contrary to the requirements or precautions in the Operating Guide, accident,
lightning strikes or other natural causes, unauthorized modification or alteration, incorrect electrical current or
voltage, reception problem caused by inadequate home antenna or faulty antenna connections, computer
software, institutional or commercial use, or other causes not arising out of defect in material or workmanship.
•
Therefore, the cost of repair or replacement of such defective product shall be borne by the consumer.
CUSTOMER INTER-ACTIVE CENTER NUMBERS:
For nearest Authorized Service Center, Where to buy,
Product Assistance, or Customer Assistance
Call 1-800-243-0000 (24 hours a day, 365 days per year)
and select appropriate options from the menu.
Or visit our website at http://www.lgservice.com
LG ELECTRONICS U.S.A., INC.
1000 SYLVAN AVENUE
P/N : 3835RV0011F
Issue O
ENGLEWOOD CLIFFS, NJ
Printed in Indonesia
Download from Www.Somanuals.com. All Manuals Search And Download.
|