RH1878P1/RH1888P1/RH1979P1/RH1989P1-NA4ULL-ENG
HDD/DVD
RECORDER
OWNER’S MANUAL
MODEL: RH188/RH188H
RH199/RH199H
Before connecting, operating or adjusting this product,
please read this instruction booklet carefully and completely.
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing a MP3/WMA, JPEG, DivX file . . . . . .33-34
Contents
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . .35-42
About DVD recording . . . . . . . . . . . . . . . . . . . .35
About HDD recording . . . . . . . . . . . . . . . . . . . .35
Timeshift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Basic Recording from a TV . . . . . . . . . . . . . . . .37
Instant Timer Recording . . . . . . . . . . . . . . . . . .37
Timer Recording . . . . . . . . . . . . . . . . . . . . . . . .38
Timer Recording with VIDEO Plus+ System . . .39
Checking Timer Recording Details . . . . . . . . . .40
Recording from an External Input . . . . . . . . . . .40
Recording from DV Input . . . . . . . . . . . . . . . . .41
Simultaneous recording and playback . . . . . . . .42
Playback another title during recording . . . .42
Time Slip . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-9
Symbol Used in this Manual . . . . . . . . . . . . . . . .4
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . .4
Recordable and Playable Discs . . . . . . . . . . . . .5
Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . .6
Regional Code . . . . . . . . . . . . . . . . . . . . . . . . . .6
Availability of copying or moving feature . . . . . . .6
About the internal hard disk drive . . . . . . . . . . . .7
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . .9
Remote Control Operation . . . . . . . . . . . . . . . . .9
Hookup and Settings . . . . . . . . . . . . . . . . . . .10-23
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Connecting to the Aerial . . . . . . . . . . . . . . . . . .10
Connections to Your TV . . . . . . . . . . . . . . . . . .11
HDMI connection (RH188H, RH199H only) . . . .12
Connecting to an Amplifier . . . . . . . . . . . . . . . .13
Accessory Audio/Video (A/V) Connections . .14-15
Using the Home Menu . . . . . . . . . . . . . . . . . . .16
Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . . .16
General Operation . . . . . . . . . . . . . . . . . . . .16
General Settings . . . . . . . . . . . . . . . . . . . . .16-19
Auto Programming . . . . . . . . . . . . . . . . . . .16
Program Edit . . . . . . . . . . . . . . . . . . . . . . . .17
Auto Clock Set / Manual Clock Set . . . . . . .18
TV Aspect / Display Mode . . . . . . . . . . . . . .18
Progressive Scan (RH188/RH199 only) . . . .18
AV2 Connection / Power Save Mode . . . . . .18
Initialization . . . . . . . . . . . . . . . . . . . . . . . . .19
Language Settings . . . . . . . . . . . . . . . . . . . . . .19
Audio Settings . . . . . . . . . . . . . . . . . . . . . . . . .19
Dolby Digital / DTS / MPEG . . . . . . . . . . . .19
Sampling Frequency . . . . . . . . . . . . . . . . . .19
DRC (Dynamic Range Control) . . . . . . . . . .19
Vocal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Lock (Parental Control) Settings . . . . . . . . . . . .20
Rating / Set Password / Area Code . . . . . . .20
DivX Registration Code . . . . . . . . . . . . . . .20
Recording Settings . . . . . . . . . . . . . . . . . . . . . .21
Record Mode Set / Record Aspect . . . . . . . .21
DV Recording Audio / TV Recording Audio .21
Auto Chapter / AV2 Recording . . . . . . . . . . .21
Disc Settings . . . . . . . . . . . . . . . . . . . . . . . .21-22
Disc Format . . . . . . . . . . . . . . . . . . . . . . . .21
Finalize / Disc Label . . . . . . . . . . . . . . . . . .22
Disc Protect / PBC . . . . . . . . . . . . . . . . . . .22
General Explanation of On-Screen Display . . . .23
Editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43-50
Title List and Chapter List Menu Overview . . . .43
HDD, VR Mode: Original and Playlist Editing . . .44
Adding Chapter Markers . . . . . . . . . . . . . . . . .44
Changing Title Thumbnails . . . . . . . . . . . . . . . .44
Making a New Playlist . . . . . . . . . . . . . . . . . . . .45
Adding Additional Title/Chapters to the Playlist .45
Deleting an Original or Playlist Title/Chapter . . .46
Deleting a Part . . . . . . . . . . . . . . . . . . . . . . . . .46
Naming a Title . . . . . . . . . . . . . . . . . . . . . . . . .47
Time Search . . . . . . . . . . . . . . . . . . . . . . . . . .47
Sort . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Undoing/Redoing the Last Deletion . . . . . . . . . .48
Combining Two Titles Into One . . . . . . . . . . . . .48
Divide One Titles Into Two . . . . . . . . . . . . . . . .49
Combining Two Chapters Into One . . . . . . . . . .49
Moving a Playlist Chapter . . . . . . . . . . . . . . . . .50
Hide a Chapter/Title . . . . . . . . . . . . . . . . . . . . .50
Protect a Title . . . . . . . . . . . . . . . . . . . . . . . . . .50
Dubbing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51-53
Before Dubbing . . . . . . . . . . . . . . . . . . . . . . . . .51
Dubbing from HDD to DVD . . . . . . . . . . . . . . .52
Dubbing from DVD to HDD . . . . . . . . . . . . . . . .52
One Touch Copy (HDD to DVD) . . . . . . . . . . . .53
One Touch Copy (DVD to HDD) . . . . . . . . . . . .53
Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . .54-59
Additional Information . . . . . . . . . . . . . . . . . . . .54
Overwriting Recording . . . . . . . . . . . . . . . . .54
Viewing Title List menu displayed on other
DVD Recorders or Players . . . . . . . . . . . . .54
Playing Your Recordings on Other DVD
Players (Finalizing a Disc) . . . . . . . . . . . . . .54
Language Codes . . . . . . . . . . . . . . . . . . . . . . .55
Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Controlling Your TV with the Supplied
Remote Control . . . . . . . . . . . . . . . . . . . . . . . .56
Troubleshooting . . . . . . . . . . . . . . . . . . . . . .57-58
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . .59
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24-34
General Playback Features . . . . . . . . . . . . .24-27
Playing a DivX Movie File . . . . . . . . . . . . . . . . .28
Playing an Audio CD or MP3/WMA file . . . . . . .29
Program Playback with Audio CD and
MP3/WMA file . . . . . . . . . . . . . . . . . . . . . . . . . .30
Viewing a JPEG File . . . . . . . . . . . . . . . . . .31-32
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on Discs
Introduction
To ensure proper use of this product, please read this
owner’s manual carefully and retain for future
reference.
Handling Discs
Do not touch the playback side of the disc. Hold the
disc by the edges so that fingerprints do not get on
the surface. Never stick paper or tape on the disc.
This manual provides information on the operation
and maintenance of your recorder. Should the unit
require service, contact an authorized service location.
About the Symbol Display
“
” may appear on your TV display during
operation and indicates that the function explained in
this owner’s manual is not available on that specific
media.
Storing Discs
After playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and never
leave it in a parked car exposed to direct sunlight.
Symbol Used in this Manual
Cleaning Discs
Note:
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
Indicates special notes and operating features.
Tip:
Indicates tips and hints for making the task easier.
A section whose title has one of the following symbols
are applicable only to the disc represented by the
symbol.
HDD Titles recorded on the HDD
DVD ALL All DVD discs listed below.
RAM DVD-RAM disc
VR
-RW
DVD-RW with VR recording mode
DVD-RW with Video recording mode
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.
Video
-RW
+RW DVD+RW disc
-R DVD-R disc
+R DVD+R (DL) disc
DVD DVD-Video disc
VCD Video CDs
ACD Audio CDs
DivX DivX files
Moisture Condensation
Never operate this product immediately after
moving it from a cold location to a warm location.
Leave it for two or three hours without operating it.
If you use this product in such a situation, it may
damage discs and internal parts.
MP3 MP3 files
WMA WMA files
JPEG JPEG files
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Recordable and Playable Discs
DVD-RW (Digital Video Disc - ReWritable):
ꢀ DVD-RW discs can be formatted for VR mode recording or Video mode recording.
ꢀ These Discs can be recorded on repeatedly. Recordings can be erased, then you can record again
on the same Disc.
[VR mode]
ꢀ Recordings can be extensively edited
ꢀ Playable only on VR mode compatible players (after finalization)
[Video mode]
ꢀ Playable on regular DVD players (after finalization)
ꢀ Limited editing features
DVD-R (Digital Video Disc - Recordable)
ꢀ
These Discs can be recorded only once. After you finalize a DVD-R, you cannot record on it or edit it.
ꢀ DVD-R discs can be only formatted to Video mode.
ꢀ Playable on regular DVD players (after finalization)
ꢀ Limited editing features
DVD-RAM (DVD - Random Access Memory)
ꢀ DVD-RAM discs can be formatted for VR mode recording.
ꢀ
These Discs can be recorded on repeatedly. Recordings can be erased, then you can record again on
the same Disc.
ꢀ Playable on DVD-RAM compatible players.
ꢀ Recordings can be extensively edited.
ꢀ Only DVD-RAM standard Version 2.0, 2.1 and 2.2 discs can be used in this unit.
ꢀ You cannot use the cartridge-type DVD-RAM disc in this unit.
DVD+RW (Digital Video Disc + ReWritable)
ꢀ These Discs can be recorded on repeatedly. Recordings can be erased, then you can record again
on the same Disc.
ꢀ Playable on DVD+RW compatible players (automatically finalization)
ꢀ The edited contents are playable on DVD+RW compatible players only after finalization
ꢀ Recordings can be edited the title/chapter
DVD+R (Digital Video Disc + Recordable)
ꢀ These Discs can be recorded only once. After you finalize a DVD+R, you cannot record on it or edit
it any more.
ꢀ Playable on DVD+R compatible players (after finalization)
ꢀ Any edited contents are not be compatible on DVD+R compatible players. (Hide, chapter combine,
added chapter mark, etc.)
ꢀ Limited title/chapter editing features.
DVD+R DL (Digital Video Disc + Recordable; Double Layer)
ꢀ These Discs can be recorded only once. After you finalize a DVD+R DL, you cannot record on it or
edit it any more.
ꢀ Storage space is nearly doubled with double layer DVD+R media, allowing consumers to record up
to 8.5GB of video on a single DVD+R disc.
ꢀ Playable on DVD+R DL compatible players (after finalization)
ꢀ Any edited contents are not be compatible on DVD+R DL compatible players. (Hide, chapter
combine, added chapter mark, etc.)
ꢀ Limited title/chapter editing features.
Recommended recordable DVD discs
DVD-R
Mitsubishi (8x, 16x)
That’s (8x, 16x)
Verbatim (8x)
DVD+R
Mitsubishi (8x, 16x)
Ricoh (8x, 16x)
Verbatim (8x)
DVD-RW
Mitsubishi (4x)
Verbatim (4x)
JVC (4x)
Victor (4x)
Maxell (4x)
DVD+RW
Mitsubishi (4x) Mitsubishi (2.4x, 8x)
SONY (4x)
Imation (4x)
Maxell (4x)
Ricoh (4x)
DVD+R(DL)
DVD-RAM
Fujifilm (2x)
Mitsubishi (3x)
Maxell (5x)
Maxell (2.4x)
-
-
-
-
-
-
-
-
-
Note: If a DVD-RW/DVD+RW discs is recorded using a personal computer or other DVD recorder, you cannot
format the disc using this recorder. So if you want to use the disc on this recorder, you must format the disc
using the original recorder.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Playable Discs
DVD (8 cm / 12 cm disc)
Discs such as movies that can be purchased or rented
Video CD (VCD) (8 cm / 12 cm disc)
VIDEO CDs or CD-Rs/CD-RWs in VIDEO CD/Super VIDEO CD format
Audio CD (8 cm / 12 cm disc)
Music CDs or CD-Rs/CD-RWs in music CD format that can be purchased
CD-R/CD-RW (8 cm / 12 cm disc)
CD-R/CD-RW discs that contain audio titles, DivX, MP3, WMA, or JPEG files.
Notes:
ꢀ
Depending on the conditions of the recording equipment or the CD-R/RW (or DVD R/RW) disc itself, some
CD-R/RW (or DVD R/RW) discs cannot be played on the unit.
ꢀ
ꢀ
ꢀ
Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc.
Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). Doing so may result in malfunctions.
Depending on the recording software & the finalization, some recorded discs (CD-R/RW or DVD R/RW) may
not be playable.
ꢀ
ꢀ
DVD-R/RW, DVD+R/RW and CD-R/RW discs recorded using a personal computer or a DVD or CD Recorder
may not play if the disc is damaged or dirty, or if there is dirt or condensation on the Recorder’s lens.
If you record a disc using a personal computer, even if it is recorded in a compatible format, there are cases
in which it may not play because of the settings of the application software used to create the disc. (Check
with the software publisher for more detailed information.)
ꢀ
ꢀ
This recorder requires discs and recordings to meet certain technical standards in order to achieve optimal
playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types
of recordable disc formats (including CD-R containing MP3 or WMA files) and these require certain pre-
existing conditions (see above) to ensure compatible playback.
Customers should note that permission is required in order to download MP3 / WMA files and music from the
Internet. Our company has no right to grant such permission. Permission should always be sought from the
copyright owner.
Regional Code
This unit has a regional code printed on the rear of the unit. This unit can play only DVD discs labeled same as
the rear of the unit or “ALL”.
Notes on Regional Codes
ꢀ
Most DVD discs have a globe with one or more numbers in it clearly visible on the cover. This number must
match your unit’s regional code or the disc cannot play.
ꢀ
If you try to play a DVD with a different regional code from the unit, the message “Incorrect region code. Can’t
play back” appears on the TV screen.
Availability of copying or moving feature
From
HDD
DISC
To
MP3/WMA JPEG
DivX
Audio CD Video CD
Title*1
Yes
DISC
HDD
No
No
No
No
No
No
No
Yes
Yes
Yes
Yes
*1 The title is recorded from this unit.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
About the internal hard disk
drive
The internal hard disk drive (HDD) is a fragile piece of
equipment. Please use the recorder following the
guidelines below to protect against possible HDD
failure.
We recommend that you back up your important
recordings onto DVD discs in order to protect against
accidental loss.
ꢀ Do not move the recorder while it is on.
ꢀ Install and use the recorder on a stable, level
surface.
ꢀ Do not block the rear vent/cooling fan.
ꢀ Do not use the recorder in excessively hot or humid
places, or in places that may be subject to sudden
changes in temperature. Sudden changes in
temperature can cause condensation to form inside
the recorder. This can be a cause of HDD failure.
ꢀ While the recorder is switched on, do not unplug
from the wall socket or switch the electricity off from
the breaker switch.
ꢀ Do not move the recorder immediately after
switching it off. If you need to move the recorder,
please follow the steps below:
1. After the message POWER OFF is shown in the
display, wait at least two minutes.
2. Unplug from the wall socket.
3. Move the recorder.
ꢀ If there’s a power failure while the recorder is on
there is a chance that some data on the HDD will
be lost.
ꢀ The HDD is very delicate. If used improperly or in
an unsuitable environment, it is possible that the
HDD will fail after a few years of use. Signs of
problems include playback unexpectedly freezing
and noticeable block noise (mosaic) in the picture.
However, sometimes there will be no warning signs
of HDD failure.
If the HDD fails, no playback of recorded material
will be possible. In this case it will be necessary to
replace the HDD unit.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel
a
b
c
d e f g h
i
j k
RH188/RH188H
l m
n
a
b
c
d e f g h
i
j k
RH199/RH199H
l
m
n
a POWER button
g N / X (PLAY / PAUSE)
Switches the recorder ON or OFF.
Starts playback.
Pause playback or recording temporarily,
press again to exit pause mode.
b Disc Tray
Insert a disc here.
h z (REC)
c Display window
Starts recording. Press repeatedly to set the
recording time.
Shows the current status of the recorder.
T/S: Indicates the timeshifting mode.
REC: The recorder is recording.
i PROG. (V/v)
Scans up or down through memorized channels.
HDD: The recorder is HDD mode.
DVD: The recorder is DVD mode.
HDD b B DVD: The recorder is dubbing.
j TIMESHIFT (RH188, RH199)
Activates pause live TV/playback (timeshift) for a
live TV program.
j RESOLUTION (RH188H, RH199H)
Sets the output resolution for HDMI and
COMPONENT/ PROGRESSIVE SCAN VIDEO
OUT jacks.
TV: Indicates when the recorder is in TV tuner
mode.
: Indicates when the recorder is in timer
recording or a timer recording is programmed.
- HDMI: 1080i, 720p, 576p, 576i
- COMPONENT: 576p, 576i
: Indicates clock, total playing
time, elapsed time, title number, chapter/track
number, channel, etc.
k Remote Sensor
Point the recorder remote control here.
l DV IN
d OPEN/CLOSE (Z)
Connect the DV output of a digital camcorder.
Opens or closes the disc tray.
m AV IN 4 (S-VIDEO IN)
e HDD/DVD
Connect the S-Video output of an external source
(TV/ Monitor, VCR, Camcorder, etc.).
Set the recorder’s mode to HDD or DVD.
f x (STOP)
n AV IN 4 (VIDEO IN/AUDIO IN (Left/Right))
Connect the audio/video output of an external
source (Audio system, TV/ Monitor, VCR,
Camcorder, etc.).
Stops playback or recording.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
AV/INPUT: Changes the input to
use for recording (Tuner, AV1-4,
or DV IN).
0-9 numerical buttons: Selects
numbered options in a menu.
DUBBING: Copies DVD to HDD
(or HDD to DVD).
TV Control Buttons: See page
56.
ENTER (
- Acknowledges menu selection.
- Displays information while
viewing a TV program.
PR/CH (+/-): Scans up or down
through memorized channels.
DISPLAY: Accesses On-Screen
Display.
)
Remote Control
RETURN (O)
Removes the menu.
a
ꢀ ꢀ ꢀ ꢀ ꢀ b ꢀ ꢀ ꢀ ꢀ ꢀ
AUDIO ( ): Selects an audio
language or audio channel.
ꢀ ꢀ ꢀ ꢀ ꢀ e ꢀ ꢀ ꢀ ꢀ ꢀ
TIMESHIFT: Activates pause live
TV/playback (timeshift) for a live
TV program.
MARKER: Marks any point during
playback.
SEARCH: Displays Marker Search
menu.
SETUP: Accesses or removes the
Setup menu.
SUBTITLE ( ): Selects a subtitle
language.
CLEAR: Removes a track number
on the Program List or a mark on
the Marker Search menu.
b
c
REC (z): Starts recording.
REC MODE: Selects the recording
mode.
TIMER REC: Displays Timer
Record menu.
PIP: Selects PIP function on or off.
ZOOM: Enlarges video image.
TITLE: Displays the disc’s Title
menu, if available.
CHP. ADD: Inserts a chapter
marker when playing/recording.
I.SKIP (INSTANT SKIP): Skips 15
seconds forward during playback.
d
e
ꢀ ꢀ ꢀ ꢀ ꢀ c ꢀ ꢀ ꢀ ꢀ ꢀ
SCAN (m / M): Search
backward or forward.
SKIP (. / >): Go to next or
previous chapter or track.
PAUSE/STEP (X) : Pause
playback or recording temporarily.
REPEAT: Repeat chapter, track,
PLAY (N): Starts playback.
title, all.
STOP (x): Stops playback or
recording.
A-B: Repeat sequence.
THUMBNAIL: Selects a thumbnail
ꢀ ꢀ ꢀ ꢀ ꢀ d ꢀ ꢀ ꢀ ꢀ ꢀ
HOME: Accesses or removes the
HOME menu.
MENU/LIST: Accesses menu on a
DVD disc. Switches between Title
List-Original and Title List-Playlist
menu.
picture.
TV/DVD: To view channels
selected by the recorder tuner or
by the TV tuner.
RESOLUTION (RH188H, RH199H
only): Sets the output resolution for
HDMI.
ꢀ ꢀ ꢀ ꢀ ꢀ a ꢀ ꢀ ꢀ ꢀ ꢀ
POWER: Switches the recorder
ON or OFF.
OPEN/CLOSE (Z): Opens and
closes the disc tray.
DVD: Selects the unit’s function
mode to DVD.
HDD: Selects the unit’s function
b / B / v / V (left/right/up/down):
Selects an option in the menu.
VIDEO Plus+: To display the
program menu for VIDEO Plus+
System programming.
mode to HDD.
Remote Control Battery Installation
Remote Control Operation
Remove the battery cover on the
rear of the Remote Control, and
insert two R03 (size AAA)
Point the Remote Control at the remote sensor and
press the buttons.
Caution
batteries with
correctly.
and
matched
Do not mix old and new batteries. Never mix different
types of batteries (standard, alkaline, etc.).
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Hookup and Settings
Rear Panel
a
b
c
d e
f
g
h
i
j
k
l
m
n
a AERIAL
i AC Power Cord
Connect the aerial to this terminal.
Plug into the power source.
b HDMI Connector (Type A)
j RF. OUT
(RH188H, RH199H only)
Passes the signal from the AERIAL to your
HDMI output providing a high quality interface for
digital audio and video.
TV/monitor
k S-VIDEO OUT
Connect to a S-Video Input on TV.
c EURO AV 2 DECODER
Connect the audio/video output of an external
source (Pay-TV decoder, Set Top Box, VCR, etc.).
l EURO AV 1 AUDIO/VIDEO
Connect to a TV with SCART jack.
d AV OUT 3 (VIDEO / AUDIO OUT (Left/Right))
m VIDEO OUT SELECT Switch
Connect to a TV with video/audio inputs.
Select either COMPONENT or RGB signal of
EURO AV1 AUDIO/VIDEO terminal depending on
how you connect the recorder to the TV.
e AV IN 3 (VIDEO IN/AUDIO IN (Left/Right))
Connect the audio/video output of an external
source (Audio system, TV/ Monitor, VCR,
Camcorder, etc.).
n COMPONENT/PROGRESSIVE SCAN VIDEO
OUT (Y Pb Pr)
Connect to a TV with Y Pb Pr inputs.
f COAXIAL (Digital audio out jack)
Connect to digital (coaxial) audio equipment.
g OPTICAL (Digital audio out jack)
Connect to digital (optical) audio equipment.
h Cooling fan
Rear of TV
Connecting to the Aerial
Aerial
SCART INPUT
VIDEO
INPUT
ANTENNA
INPUT
AUDIO INPUT
Remove the aerial cable plug from your TV set and
insert it into the aerial socket at the back of the
recorder. Plug one end of the aerial cable into the TV
socket on the recorder and the other end into the
aerial input socket on your TV set.
R
L
R
RF coaxial connection
Connect the RF. OUT jack on the recorder to the
aerial input jack on the TV using the 75-ohm Coaxial
Cable supplied (R). The RF. OUT jack passes the
signal through from the AERIAL jack.
Rear of the recorder
10
Download from Www.Somanuals.com. All Manuals Search And Download.
SCART connection
Connections to Your TV
Connect the EURO AV1 AUDIO/VIDEO scart jack on
the recorder to the corresponding in jacks on the TV
using the scart cable (T).
ꢀ
Make one of the following connections, depending
on the capabilities of your existing equipment.
ꢀ
When using the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks, set the VIDEO OUT
SELECT switch to COMPONENT. When using the
SCART jack, set the VIDEO OUTPUT SELECT
switch to RGB.
Video connection
Connect the VIDEO OUT jack on the recorder to the
video in jack on the TV using the video cable (V).
Audio (Left/Right) Connection
Tips
Connect the left and right AUDIO OUT jacks of the
recorder to the audio left and right IN jacks on the TV
using the audio cables (A). Do not connect the
recorder’s AUDIO OUT jack to the phono in jack
(record deck) of your audio system.
ꢀ
Depending on your TV and other equipment you
wish to connect, there are various ways you could
connect the recorder. Use only one of the
connections described below.
ꢀ
Please refer to the manuals of your TV, VCR,
Stereo System or other devices as necessary to
make the best connections.
S-Video connection
Connect the S-VIDEO OUT jack on the recorder to the
S-Video in jack on the TV using the S-Video cable (S).
Caution
Component Video connection
– Make sure the recorder is connected directly to the
TV. Tune the TV to the correct video input channel.
– Do not connect the recorder’s AUDIO OUT jack to
the phono in jack (record deck) of your audio
system.
Connect the COMPONENT / PROGRESSIVE SCAN
VIDEO OUT jacks on the recorder to the
corresponding input jacks on the TV using an Y Pb Pr
cable (C).
– Do not connect your recorder via your VCR. The
DVD image could be distorted by the copy
protection system.
If your television is a high-definition or “digital ready”
television, you may take advantage of the recorder’s
progressive scan output for the highest video
resolution possible. If your TV does not accept the
Progressive Scan format, the picture will appear
scrambled if you try Progressive Scan on the recorder.
Rear of TV
ꢀ
RH188/RH199: Set the [Progressive Scan] option
to [ON] on the setup menu for progressive signal,
see page 18.
SCART INPUT
S-VIDEO
INPUT
VIDEO
INPUT
AUDIO INPUT
COMPONENT VIDEO INPUT
Pr
R
Y
Pb
L
ꢀ
RH188H/RH199H: Set the resolution to 576p using
RESOLUTION button for progressive signal.
Note:
Progressive scan does not work with the analog video
connections (yellow VIDEO OUT jack) or S-VIDEO
connection.
S
T
C
V
A
Caution (RH188/RH199 only)
Once the setting for Progressive Scan output is
entered, an image will only be visible on a
Progressive Scan compatible TV or monitor. If you set
Progressive Scan to [ON] in error, you must reset the
recorder. First, remove the disc in the recorder. Next,
press STOP (x) and hold it for five seconds before
releasing it. The video output will be restored to the
standard setting, and a picture will once again be
visible on a conventional analog TV or monitor.
Rear of the recorder
Caution (RH188H/RH199H only)
If the resolution is set to 720p or 1080i, the VIDEO
OUT, S-VIDEO OUT and COMPONENT VIDEO OUT
connections are not available.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
HDMI compatible TV
HDMI connection
HDMI
(RH188H/RH199H only)
If you have a HDMI TV or monitor, you can connect it
to this recorder using a HDMI cable.
H
1. Connect the HDMI jack on the recorder to the
HDMI jack on a HDMI compatible TV or monitor
(H).
2. Set the TV’s source to HDMI (refer to TV’s Owner’s
manual).
Notes:
ꢀ If your TV is NOT capable of handling 96 kHz
sampling frequency, set the [Sampling Freq.] option
to [48 kHz] on the setup menu (See page 19).
When this choice is made, this unit will
automatically convert any 96 kHz signals to 48 kHz
so your system can decode them.
Rear of the recorder
About HDMI
HDMI (High Definition Multimedia Interface) supports
both video and audio on a single digital connection for
use with DVD Players, Set-Top Boxes, and other AV
devices.
ꢀ If your TV is not equipped with Dolby Digital and
MPEG decoder, set the [Dolby Digital] and [MPEG]
options to [PCM] on the setup menu (See page 19).
HDMI was developed to provide the technologies of
HDCP (High Definition Contents Protection). HDCP is
used to protect digital content transmitted and
received.
ꢀ If your TV is not equipped with DTS decoder, set
the [DTS] options to [OFF] on the setup menu (See
page 19). To enjoy DTS multi channel surround, you
must connect this recorder to a DTS compatible
receiver via one of this recorder’s digital audio
outputs.
HDMI has the capability to support standard, enhanced,
or high-definition video plus standard to multi-channel
surround-sound audio, HDMI features include
uncompressed digital video, a bandwidth of up to 5
gigabytes per second, one connector (instead of several
cables and connectors), and communication between the
AV source and AV devices such as DTVs.
ꢀ The arrow on the cable connector body should face
up for correct alignment with the connector on the
recorder.
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI licensing LLC.
(Type A)
Additional Information for HDMI
ꢀ If there is noise or lines on the screen, please check
the HDMI cable.
ꢀ When you connect a HDMI or DVI compatible
device make sure of the followings:
- Try switching off the HDMI/DVI device and this
recorder. Next, switch on the HDMI/DVI device
and leave it for around 30 seconds, then switch
on this recorder.
- The connected device’s video input is set
correctly for this unit.
- The connected device is compatible with
720(1440)x576i, 720x576p, 1280x720p, or
1920x1080i video input.
Tip :
When you use HDMI connection, you can change the
resolution (576i, 576p, 720p, or 1080i) for the HDMI
output using RESOLUTION button.
Caution
Changing the resolution when the recorder is
connected with HDMI connector may result in
malfunctions. To solve the problem, turn off the
recorder and then turn it on again.
ꢀ Not all HDCP-compatible DVI devices will work with
this recorder.
- The picture will not be displayed properly with
non-HDCP device.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to an Amplifier
Rear of the recorder
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Pro Logic ll/
Pro Logic
Connect the Left and Right AUDIO OUT jacks on the
recorder to the audio left and right in jacks on your
amplifier, receiver, or stereo system, using the audio
cables (A).
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby Digital™, MPEG 2, or DTS)
A
X
O
1. Connect one of the recorder’s DIGITAL AUDIO
OUT jacks (OPTICAL O or COAXIAL X) to the
corresponding in jack on your amplifier. Use an
optional digital (optical O or coaxial X) audio cable.
L
R
COAXIAL
DIGITAL INPUT
OPTICAL
2. You will need to activate the recorder’s digital
output. (See “Audio Settings” on page 19).
AUDIO INPUT
DIGITAL INPUT
Amplifier (Receiver)
Digital Multi-channel sound
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats supported by your recorder (MPEG 2,
Dolby Digital and DTS). Check the receiver manual
and the logos on the front of the receiver.
Manufactured under license from Dolby
Laboratories. “Dolby”, “Pro Logic”, and the double-
D symbol are trademarks of Dolby Laboratories.
“DTS” and “DTS Digital Out” are trademarks of
Digital Theater Systems, Inc.
Caution:
Due to the DTS Licensing agreement, the digital
output will be in DTS digital out when DTS audio
stream is selected.
Notes:
– If the audio format of the digital output does not
match the capabilities of your receiver, the receiver
will produce a strong, distorted sound or no sound
at all.
– Six Channel Digital Surround Sound via digital
connection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
– To see the audio format of the current DVD in the
on-screen display, press AUDIO.
– This recorder does not perform internal (2 channel)
decoding of a DTS sound track. To enjoy DTS
multi channel surround, you must connect this
recorder to a DTS compatible receiver via one of
this recorder’s digital audio outputs.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
TV
Accessory Audio/Video (A/V)
Connections
VCR, Cable Box, or
Satellite Tuner, etc.
Connecting a PAY-TV/Canal Plus Decoder
You can watch or record PAY-TV/Canal Plus
programmes if you connect a decoder (not supplied)
to the recorder. Disconnect the recorder’s mains lead
from the mains when connecting the decoder.
To watch or record PAY-TV/Canal Plus programmes,
set [AV2 Connection] option to [Decoder] (see page
18) and set the program’s [Decoder On/Off] option to
[On] on the Setup menu (page 17).
Tip:
You do not need to turn on the recorder to view the
signals from the connected tuner on your TV.
Note:
If you disconnect the recorder’s mains lead, you will
not be able to view the signals from the connected
decoder.
Rear of the recorder
Tip:
You do not need to turn on the recorder to view the
signals from the connected tuner on your TV.
TV
Notes:
PAY-TV/Canal Plus
Decorder
ꢀ Pictures containing copy protection signals that
prohibit any copying cannot be recorded.
SCART AV
ꢀ If you pass the recorder signals via the VCR, you
may not receive a clear image on your TV screen.
Be sure to connect your VCR to the recorder and
your TV in the order shown below. To watch video
tapes, watch the tapes through a second line input
on your TV.
Line input 1
TV
VCR
RECORDER
Line input 2
ꢀ When you record to a VCR from this recorder, do
not switch the input source to TV by pressing the
TV/DVD button on the remote.
Rear of the recorder
ꢀ If you are using a B Sky B tuner, be sure to connect
the tuner’s VCR SCART jack to the EURO AV2
DECODER jack.
Connecting to the EURO AV2 DECODER
ꢀ If you disconnect the recorder’s mains lead, you will
not be able to view the signals from the connected
VCR or tuner.
jack
Connect a VCR or similar recording device to the
EURO AV2 DECODER jack of this recorder.
To watch or record the source from EURO AV2
DECODER jack, set [AV2 Connection] option to
[Others] (see page 18) and set [AV2 Record] option to
[Auto], [CVBS] or [RGB] as required (see page 21).
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to the AV IN 3 or AV IN 4
Connecting a Digital Camcorder
Jacks
Using the front panel DV IN jack, it is possible to
connect a DV digital camcorder and digitally transfer
DV tapes to DVD.
Connect the input jacks (AV IN 3, AV IN 4) on the
recorder to the audio/video out jacks on your
accessory component, using audio/video cables.
Use a DV cable (not supplied) to connect the DV
in/out jack of your DV camcorder to the front panel DV
IN jack of this recorder.
Note:
If you use the S-VIDEO IN jack on the front panel, the
VIDEO IN jack on the front panel is not available.
Note:
This jack is for connection to DV digital camcorder
only. It is not compatible with digital satellite tuners or
D-VHS video decks.
Jack panel of Accessory Component
(VCR, Camcorder, etc.)
AUDIO
OUTPUT
R
L
DV Digital Camcorder
DV
IN/OUT
VIDEO
OUTPUT
S-VIDEO
OUTPUT
OR
Rear of
Front of
the recorder
the recorder
Front of the recorder
15
Download from Www.Somanuals.com. All Manuals Search And Download.
General Operation
Using the Home Menu
1. Press SETUP and the Setup menu appears.
From the Home Menu screen you can access all the
Media for playback and recording of the recorder.
2. Use v / V to select the desired option.
3. While the desired item is selected, press B to
1. Press HOME to display the Home Menu screen.
move to the second level.
2. Use the b / B buttons to select a main option you
4. Use v / V to select the second desired option.
want. Sub options appears.
5. Press B to move to the third level.
3. Use the v / V and ENTER buttons to select the
sub option you want.
6. Use v / V to select the desired setting then press
ENTER to confirm your selection.
Some items require additional steps.
7. Press SETUP to exit the Setup menu.
Note:
4. To exit the HOME menu, press HOME.
Press b to go back to the previous level.
TV
General Settings
ꢀ TV HDD: Returns to live TV viewing for HDD
recording.
ꢀ TV DVD: Returns to live TV viewing for DVD
recording.
Auto Programming
This recorder is equipped with a frequency
synthesized tuner capable of receiving up to 88 TV
channels.
MOVIE
ꢀ
HDD: Displays the Title List menu for HDD. (page 43)
ꢀ HDD DivX: Displays the [Movie List] menu for HDD.
Preparation:
(page 28)
ꢀ DISC:
ꢀ Connect the recorder to the desired type of aerial,
as shown in Connecting to the Aerial on page 10.
-
Displays Title List menu for recordable disc (page 43)
- Displays [Movie List] menu for DivX disc.
(page 28)
- Plays back Video CD or DVD-Video disc
(page 24-27).
PHOTO (See page 31)
ꢀ HDD: Displays [Photo List] menu for HDD.
ꢀ DISC: Displays [Photo List] menu for disc.
MUSIC (See page 29)
ꢀ HDD: Displays [Music List] menu for HDD.
ꢀ DISC: Displays [Music List] (or Audio CD) menu for
1. Select the [Auto Programming] option.
disc.
2. Press B to move to the third level.
[Start] icon is highlighted.
SETUP (See page 16)
ꢀ Start: Displays Setup menu.
3. Press ENTER to begin the channel search.
The tuner will automatically cycle through all
available channels in the area and place them in
the tuner’s memory.
Initial Settings
In this menu system, there are several ways to
customize the settings provided. Most menus consist
of three levels to set up the options, but some require
greater depth for the variety of settings.
Note:
After you have connected your recorder for the very
first time. If you press SETUP for initial setting, you
can only set the [Auto Programming] option. Then you
can set the other options.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Program Edit
General Settings (Continued)
You can perform a search to select and store TV
channels manually.
Program Edit
When you select [Program Edit] in step 4 above, the
display for setting channels appears.
You can edit a channel manually (add, delete, name,
move, etc.).
1. Use b / B to select the item and press v / V to
1. Select [Program Edit] option then press B.
change the setting.
2. Press ENTER while [Edit] is selected.
The Program List menu appears.
ꢀ
ꢀ
[PR] indicates the selected programme position.
[Seek] Searches for a channel automatically.
Searching stops when the recorder tunes in a
channel.
ꢀ
ꢀ
[Ch.] Changes the channel number.
[MFT] Fine tunes the channel to obtain a clearer
picture.
3. Use v / V to select a PR number then press
2. Choose OK then press ENTER to confirm the
setting and returns to the Program List menu.
ENTER.
4. Use v / V to select the program option then press
ENTER.
AV1 Decoder
ꢀ
[Program Edit] Sets the channel manually. See
“Program Edit” on the right.
Sets the EURO AV1 AUDIO/VIDEO jack for inputting
encoded video signals.
1. Press AV/INPUT while the Program List menu
appears.
2. Press ENTER so [Canal+] appears on the display.
Press ENTER again to turn off the setting.
ꢀ
[Station Rename] Changes the station name.
The display for entering characters appears.
To enter characters, see page 47.
Names can be up to 5 characters long.
[Move] Sorts the programme positions on the
Program List. Press v / V to move the selected
programme position to a new location.
[Delete] Disables a programme position you do
not need.
[Decoder On/Off] Sets the channels for the
decoder. You need this setting to watch or
record PAY-TV/Canal Plus programmes.
Press ENTER so [Decoder] appears on the
display. Press ENTER again to turn off the
setting.
ꢀ
ꢀ
Off: Inputs the signals from the EURO AV1
AUDIO/VIDEO jack. Normally select this.
On: The encoded video signal input from the
EURO AV1 AUDIO/VIDEO jack is output to the
EURO AV2 DECODER jack for decoding.
The decoded signal is then input back through
the EURO AV2 DECODER jack so you can
record or view PAY-TV/Canal Plus programmes.
ꢀ
ꢀ
ꢀ
ꢀ
[NICAM Auto/off] Sets the channels for the
NICAM broadcast. Normally, [NICAM] is lit on
the display. If the sound from NICAM broadcast
is not clear, press ENTER so [NICAM]
disappears.
5. Press RETURN (O) repeatedly to exit Program
List menu.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Progressive Scan (RH188/RH199 only)
General Settings (Continued)
Progressive Scan Video provides the highest quality
pictures with less flickering.
Auto Clock Set
If you are using the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks, but are connecting the
recorder to a standard (analog) television, set
Progressive Scan to [OFF].
When Channel auto search is completed the actual
Time and Date are also set automatically. If the time in
the recorder display is not correct, the clock must be
set manually.
If you are using the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks for connection to a TV or
monitor that is compatible with a progressive scan
signal, set Progressive Scan to [ON].
1. Select [Clock set] option then press B.
2. Use v / V to select [Auto] option then press
ENTER.
Note:
Note:
There are cases where the TV station does not send,
or sends wrong date and/or time information and the
recorder sets the incorrect time.
If this happens, we recommend that you set the clock
manually.
Progressive Scan will be disable in the setup menu
when the VIDEO OUT SELECT switch on the rear
panel is set to RGB position.
Caution
Once the setting for Progressive Scan output is
entered, an image will only be visible on a
Progressive Scan compatible TV or monitor. If you set
Progressive Scan to [ON] in error, you must reset the
recorder. First, remove the disc in the recorder. Next,
press STOP (x) and hold it for five seconds before
releasing it. The video output will be restored to the
standard setting, and a picture will once again be
visible on a conventional analog TV or monitor.
Manual Clock Set
1. Select [Clock set] option then press B.
2. Use v / V to select [Manual] option then press
ENTER.
3. Enter the necessary information for date and time.
b / B (left/right): Moves the cursor to the previous
or next column.
v / V (up/down): Changes the setting at the
current cursor position.
AV2 Connection
4. Press ENTER to confirm your setting.
You can connect a decoder or other device to the
EURO AV2 DECODER socket on the back.
ꢀ [Decoder] Select [Decoder] if you connect the
recorder’s EURO AV2 DECODER jack to a PAY-TV
or Canal Plus decoder.
TV Aspect
Selects the aspect ratio of the connected TV (4:3
standard or wide).
ꢀ [Others] Select [Others] if you connect the
recorder’s EURO AV2 DECODER jack to a VCR or
similar recording device.
ꢀ [4:3] Select this when connecting to a 4:3 screen
TV. When you select [4:3], set [Display Mode]
below.
ꢀ [16:9] Select this when connecting to a wide-screen
TV or TV with a wide mode function.
Power Save Mode
You can set up the unit into an economic power save
mode. Nothing is displayed in the display window
when the unit is turned off.
Display Mode
Selects how to display a wide picture on the screen
when [4:3] is selected in [TV Aspect].
ꢀ [OFF] Power Save Mode is not active.
ꢀ [ON] Power Save Mode is active.
ꢀ [Letter Box] Displays a wide picture with bands on
the upper and lower portions of the screen.
Notes:
ꢀ The encoded television signals (CANAL+ or
PREMIERE) are not decoded in the Power Save
Mode.
ꢀ [Pan Scan] Automatically displays a wide picture on
the entire screen and cuts off the portions that do
not fit.
ꢀ The Power Save Mode is not available in the
standby mode for the timer recording and when
power off of the unit after receiving the encoded
television signals (CANAL+ or PREMIERE).
18
Download from Www.Somanuals.com. All Manuals Search And Download.
General Settings (Continued)
Audio Settings
Each DVD disc has a variety of audio output options.
Set the recorder’s Audio Output according to the type
of audio system you use.
Initialization
You can reset the recorder to its original factory
settings and initialize the HDD.
ꢀ [Factory Set] If you need to, you can reset the
recorder to all its factory settings. Some options
cannot be reset. (Rating, Password, and Area
Code)
ꢀ [HDD format] Initializes the HDD (Hard Disk Drive):
everything recorded on the HDD will be erased.
1. Select [Initialize] option then press B.
2. Press v / V to select the desired option then press
ENTER.
Dolby Digital / DTS / MPEG
The confirm message will appear.
3. Use b / B to select [Yes] or [No] then press
ꢀ [Bitstream]: Select “Bitstream” if you connect the
recorder’s DIGITAL AUDIO OUT jack to an amplifier
or other equipment with a Dolby Digital, DTS or
MPEG decoder.
ENTER.
Language Settings
ꢀ [PCM] (for Dolby Digital / MPEG): Select when
connected to a two-channel digital stereo amplifier.
DVDs encoded in Dolby Digital or MPEG will be
automatically downmixed to two-channel PCM
audio.
ꢀ [Off] (for DTS): If you select “Off”, the DTS signal is
not output through the DIGITAL AUDIO OUT jack.
Sampling Frequency
If your receiver or amplifier is NOT capable of
handling 96 kHz signals, select [48 kHz]. When this
choice is made, this unit will automatically convert any
96 kHz signals to 48 kHz so your system can decode
them.
If your receiver or amplifier is capable of handling
96 kHz signals, select [96 kHz]. When this choice is
made, this unit will pass each type of signal through
without any further processing.
Display Menu
Select a language for the Setup menu and on-screen
display.
Disc Menu/Audio/Subtitle
ꢀ [Original]Refers to the original language in which
the disc was recorded.
DRC (Dynamic Range Control)
ꢀ [Other] To select another language, press number
buttons then ENTER to enter the corresponding
4-digit number according to the language code list
in the reference chapter (see page 55). If you enter
the wrong language code, press CLEAR.
With the DVD format, you can hear a program’s
soundtrack in the most accurate and realistic
presentation possible, thanks to digital audio
technology. However, you may wish to compress the
dynamic range of the audio output (the difference
between the loudest sounds and the quietest ones).
Then, you may listen to a movie at a lower volume
without losing clarity of sound. Set DRC to [ON] for
this effect.
ꢀ [Off](for Disc Subtitle) : Turn off Subtitle.
Vocal
Set Vocal to [ON] only when a multi-channel karaoke
DVD is playing. The karaoke channels on the disc will
mix into normal stereo sound.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Password
Lock (Parental Control) Settings
1. Select [Set Password] option then press B.
2. Follow step 2 as shown “Rating”.
To change the password, select the [Change],
press ENTER and input the new 4-digit code then
press ENTER. Input it again to verify.
To delete the password, select [Delete] then press
ENTER.
If you forget your 4-digit code
If you forget your password, to clear the current
password, follow the procedure below.
1. Display Setup menu then select an 1 level icon.
2. Use the Number buttons to enter the 6-digit
number “210499”.
3. Select [Yes] then press ENTER. The 4-digit
password is cleared. Enter a new code.
Rating
Blocks playback of rated DVDs based on their
content. Not all discs are rated.
1. Select [Rating] option then press B.
2. To access the Rating, Password and Area Code
features, you must input the 4-digit security code
you created.
Area Code
Enter the code of an area whose standards were used
to rate the DVD video disc, referring to the list (See
“Area Codes”, page 55.).
If you have not yet entered a security code you
are prompted to do so. Input a 4-digit code and
press ENTER. Enter it again and press ENTER to
verify. If you make a mistake before pressing
ENTER, press CLEAR.
1. Select [Area Code] option then press B.
2. Follow step 2 as shown “Rating”.
3. Select the first character using the v / V
3. Select a rating using the v / V buttons.
buttons.
[1] - [8]: Rating one (1) has the most restrictions
and rating eight (8) is the least restrictive.
4. Shift the cursor using B buttons and select the
second character using v / V buttons.
[No Limit]: If you select [No Limit], parental control
is not active and the disc plays in full.
5. Press ENTER to confirm your area code selection.
DivX
4. Press ENTER to confirm your rating selection.
DivX Registration Code
We provide you the DivX® VOD (Video On Demand)
registration code that allows you to rent and purchase
videos using the DivX® VOD service. For more
Note:
If you set a rating for the recorder, all disc scenes with
the same rating or lower are played. Higher rated
scenes are not played unless an alternate scene is
available on the disc. The alternative must have the
same rating or a lower one. If no suitable alternative is
found, playback stops. You must enter the 4-digit
password or change the rating level in order to play
the disc.
1. Select [DivX Reg. Code] option then press B.
2. Press ENTER while [View] is selected and the
registration code will appear.
3. Use the registration code to purchase or rent the
videos from DivX® VOD service at
download the video onto a disc for playback on
this unit.
Note:
All the downloaded videos from DivX® VOD can only
be played back on this unit.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
AV2 Recording
Recording Settings
You can select the type of the signal when recording
video input signal from the device connected to the
EURO AV2 DECODER socket.
[Auto] The video input signal will automatically follow
the video signal received.
[CVBS] Only for recording CVBS input signal.
[RGB] Only for recording RGB input signal.
Disc Settings
Disc Format
Record Mode Set
If you load a completely blank disc, the recorder will
initialize the disc.
DVD-R: The recorder initialize the disc to Video
mode. The recording mode will always be Video
mode.
DVD-RW/DVD+RW/DVD+R(DL)/DVD-RAM: The
Initialize menu will appears. Select [OK] then press
ENTER. DVD-RW disc is initialized to Video mode.
Also, you can reformat the DVD-RW/DVD+RW/
DVD-RAM from the Setup menu as below.
You can set the picture quality for recording;
XP (High Quality), SP (Standard Quality),
LP (Low Quality), EP (Extend Quality).
Record Aspect
When DVD recording, you can set the recording
aspect ratio to suit the material you’re recording (16:9
or 4:3).
DV Recording Audio
You need to set this if you have a camcorder using
32kHz/12-bit sound connected to the front panel DV
IN jack.
Some digital camcorders have two stereo tracks for
audio. One is recorded at the time of shooting; the
other is for overdubbing after shooting.
On the Audio 1 setting, the sound that was recorded
while shooting is used.
On the Audio 2 setting, the overdubbed sound is
used.
1. Select [Disc Format] option then press B.
2. Press ENTER while [Start] is selected.
Format Disc menu appears.
TV Recording Audio
3. Use b / B to select a desired mode (VR Mode or
Video Mode) then press ENTER.
Confirm message will appear.
When TV recording with bilingual, you can choose
audio channel to record.
For DVD+RWs, go to step 4.
[Main+Sub] Main language and Sub language
[Main] Main language only
[Sub] Sub language only
4. Use b / B to select [OK] then press ENTER.
It takes a few moments to initialize the disc.
Caution
Auto Chapter
If you want to change the disc format, everything
recorded on the disc will be erased.
When recording in Video mode, chapter markers are
put in specified setting. You can change this interval to
5 minutes, 10 minutes or 15 minutes. If you select
[None], switch off automatic chapter marking
altogether with the [None] setting.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Label
Disc Settings (Continued)
Use this to enter a name for the disc. This name
appears when you load the disc and when you display
disc information on-screen.
ꢀ The disc name can be up to 32 characters long.
ꢀ For discs formatted on a different recorder, you will
see only a limited character set.
Finalize
Finalizing ‘fixes’ the recordings in place so that the
disc can be played on a regular DVD player or
computer equipped with a suitable DVD-ROM drive.
Finalizing a Video mode disc creates a menu screen
for navigating the disc. This is accessed by pressing
MENU/LIST or TITLE.
1. Select [Disc Label] option then press B.
2. Press ENTER while [Edit] is selected.
Keyboard menu appears.
Caution
To enter characters, see page 47.
Once you have finalized a DVD-R and DVD+R disc,
you cannot edit or record anything else on that disc
except DVD+RW. However, you can record and edit a
DVD-RW disc by choosing [Unfinalize] option.
Disc Protect
When recording in DVD-RAM / DVD+RW / +R disc or
VR mode formatted DVD-RW disc, set to [ON] to
prevent accidental recording, editing or deleting of the
disc loaded. If you need to unlock the disc to make
edits, select [OFF].
PBC
PBC stands for Playback Control and refers to special
menus and navigation features that are available on
some Video CDs.
ꢀ [ON] Video CDs are played according to the PBC, if
available.
1. Select [Finalize] option then press B.
ꢀ [OFF] Video CDs are played the same way as Audio
CDs.
2. Press ENTER while [Finalize] is selected.
Finalize menu appears.
3. Select [OK] then press ENTER.
The recorder starts finalizing the disc.
Note:
ꢀ How long finalization takes depends on the type of
disc, how much is recorded on the disc, and the
number of titles on the disc.
ꢀ DVD+R DL disc can take up to 30 minutes to
finalize.
Tips
ꢀ If you load a DVD-RW that has already been
finalized, you can ‘Unfinalize’ it by choosing
Unfinalize from the Finalize menu. After doing this,
you can edit and re-record onto the disc.
ꢀ You cannot unfinalize a DVD-R and DVD+R disc.
ꢀ If [Disc Protect] option is set to [ON], the finalize is
not available. To finalize, set [Disc Protect] option to
[OFF].
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Displaying Disc Information on-screen
You can display various information about the disc
loaded on-screen.
General Explanation of
On-Screen Display
This manual gives basic instructions for operating the
recorder. Some DVDs require specific operation or
allow only limited operation during playback. When
1. Press DISPLAY once to show current status.
this occurs, the symbol
appears on the TV screen,
indicating that the operation is not permitted by the
recorder or is not available on the disc.
2. Press DISPLAY once again to show various
playback information.
Displaying Information While Watching TV
The items displayed differ depending on the disc
type or playing status.
During viewing the TV, press ENTER or DISPLAY
to display/remove the information displayed
on-screen.
Indicates channel number, station name, and
audio signal (STEREO, MONO) received by
the tuner.
Indicates the record mode,
free space, and elapsed
time progress bar.
Indicates disc name
and format.
3. You can select an item by pressing v / V and
change or select the setting by pressing b / B.
For details about each item, see the pages in
parentheses.
ꢀ [Title]: Current title (or track) number/total
number of titles (or tracks) (page 24, 26)
ꢀ [Chapter]: Current chapter number/total number
of chapters (page 24)
ꢀ [Time]: Elapsed playing time (page 26)
ꢀ [Audio]: Selected audio language (DVD VIDEO
only) or audio channel (page 25)
ꢀ [Subtitle]: Selected subtitle (page 25)
ꢀ [Angle]: Selected angle/total number of angles
(page 26)
ꢀ [Sound]: Selected sound mode (page 27)
Indicates current date and time.
Note:
If no button is pressed for 10 seconds, the on-screen
display disappears.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
General Playback Features
1. Load your chosen disc in the tray, with the playback side down.
2. Starts playback using HOME menu (see page 16).
3. To stop the playback, press STOP (x).
The unit records the stopped point, depending on the disc. “Xx” appears on the screen briefly.
Press PLAY (N) to resume playback (from the scene point). If you press STOP (x) again or unload the disc
(“x” appears on the screen.), the unit will clear the stopped point.
4. Press OPEN/CLOSE (Z) to remove the disc.
Press OPEN/CLOSE (Z) to close disc tray or press POWER (1), the disc tray closes automatically and unit
turns off.
Note:
If Parental Control is set and the disc is not within the Rating settings (not authorized), the 4-digit code must be
entered and/or the disc must be authorized (see “Rating”, on page 20).
Buttons
Operations
Discs
All Discs
OPEN / CLOSE (Z) Opens or closes the disc tray.
All Discs
PAUSE/STEP (X)
During playback, press PAUSE/STEP (X) to pause
playback.
Press PAUSE/STEP (X) repeatedly to play Frame-by-Frame.
Tip:
HDD DVD ALL VCD
You can advance or back up the picture frame-by-frame by
pressing b / B repeatedly during PAUSE mode.
The picture frame-by-frame in reverse is not available for
Video CD.
SKIP (. / >)
During playback, press SKIP (. or >) to go to the next
chapter/track or to return to the beginning of the current
chapter/track.
HDD DVD ALL VCD
DivX ACD MP3
WMA
Press SKIP . twice briefly to step back to the previous
chapter/track.
Tips:
ꢀ
To go directly to any chapter during DVD playback, press
DISPLAY twice and press v / V to select the chapter
icon. Then, input the chapter number or use b / B.
On an Audio CD, to go directly to any track, enter the
track number using the numbered buttons (0-9) during
playback.
ꢀ
SCAN (m / M)
During playback, press SCAN (m or M) repeatedly to
select the required scan speed.
HDD, DVD; 5 steps
HDD DVD ALL VCD
DivX ACD
DivX; 4 steps
Video CD, Audio CD; 3 steps
While the playback is paused, press SCAN (m or M)
repeatedly to play in slow motion.
HDD, DVD; 4 steps
HDD DVD ALL VCD
HDD DVD ALL VCD
Video CD; 3 steps (Forward only)
ZOOM
During playback or pause mode, press ZOOM to enlarge
the video image.
(x1 size → x2 size → x4 size → x1 size (normal size)
You can move through the zoomed picture using b B v V
buttons.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
General Playback Features (Continued)
Buttons
Operations
Discs
REPEAT
During playback, press REPEAT repeatedly to select a
desired repeat mode.
HDD (Title/Off), DVD (Chapter/Title/Off)
VR mode DVD-RW (Chapter/Title/All/Off)
Video CD, Audio CD (Track/All/Off)
MP3/WMA (Track/Folder/Off)
HDD DVD ALL VCD
ACD MP3 WMA
Notes:
ꢀ
On a Video CD with PBC, you must set PBC to [OFF] in the
Setup menu to use the Repeat function. See page 22.
If you press SKIP (>) once during Repeat Chapter
(Track) playback, the repeat playback cancels.
ꢀ
A-B
During playback, each press of A-B button to select point A
and point B and repeats a sequence from point A (Starting
point) to point B (End point).
HDD DVD ALL VCD
ACD
Note:
During HDD playback, you cannot select a sequence less
than 5 seconds.
TITLE
If the current DVD title has a menu, the title menu appears
on the screen. Otherwise, the disc menu may appears.
DVD
MENU/LIST
SUBTITLE (
The disc menu appears on the screen.
DVD
DVD
)
During playback, press SUBTITLE then press b / B
repeatedly to select a desired subtitle language.
DVD
AUDIO (
)
Press AUDIO then press b / B repeatedly to hear a
different audio language or audio track.
Note:
Some discs feature both Dolby Digital and DTS
soundtracks. There is no analog audio output when DTS is
selected. To listen to the DTS soundtrack, connect this
recorder to a DTS decoder via one of the digital outputs.
See page 13 for connection details.
Press AUDIO then press b / B repeatedly during playback
to hear a different audio channel (STEREO, LEFT or
RIGHT).
VR
Video
HDD -RW
RAM +RW
+R VCD DivX
-RW
-R
With DVD-RW discs recorded in VR mode and HDD that
have both a main and a Bilingual audio channel, you can
switch among Main (L), Sub (R), or Main+sub (L+R).
Press AUDIO repeatedly during playback to hear a different
audio channel (STEREO, LEFT or RIGHT).
ACD MP3 WMA
HDD DVD ALL
I.SKIP
Press I.SKIP repeatedly during playback to skip forward
15 seconds.
In HDD playback or Timeshift mode, each press b / B
skips forward or reverse 5 minutes.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
If a menu screen is displayed DVD VCD
Marker Search
The menu screen may be displayed first after loading a
DVD or Video CD which contains a menu.
VR
Video
HDD -RW
-RW
RAM +RW
-R
+R
DVD VCD
DVD
To enter a Marker
Use the b / B / v / V buttons to select the
title/chapter you want to view, then press ENTER to
start playback.
Press TITLE or MENU/LIST to return to the menu
screen.
You can start playback from up to six memorized
points. To enter a marker, press MARKER at the
desired point on the disc. The Marker icon appears on
the TV screen briefly. Repeat to enter up to six
markers.
VCD
ꢀ Use the number buttons to select the track you want
to view.
To Recall or Clear a Marked Scene
1. During disc playback, press SEARCH. The marker
search menu appears on the screen.
Press RETURN (O) to return to the menu screen.
ꢀ Menu setting and the exact operating procedures
for using the menu may differ depending on the
disc. Follow the instructions on the each menu
screen. You may also set PBC to [OFF] under
Setup menu (see page 22).
2. Use b / B / v / V to select a marked scene that
you want to recall or clear.
3. Press ENTER and playback starts from the
marked scene. Or, press CLEAR and the marked
scene is erased from the marker search menu.
VR
Moving to another TITLE HDD -RW
Video
-RW
RAM +RW
-R
+R
DVD
DivX
When a disc has more than one title, you can move to
another title as follows:
ꢀ
Press DISPLAY twice during playback then use
v / V to select the title icon. Then, press the
appropriate numbered button (0-9) or b / B to
select a title number.
VR
Video
-RW
Time Search HDD -RW
RAM
Camera Angle DVD
+RW
-R
+R
DVD DivX
If the disc contains scenes recorded at different
camera angles, you can change to a different camera
angle during playback.
To start playing at any chosen time on the disc:
1. Press DISPLAY twice during playback. The time
search box shows the elapsed playing time.
1. Press DISPLAY during playback. The On-Screen
Display appears on the TV screen.
2. Press v / V to select the time clock icon
and “0:00:00” appears.
2. Use v / V to select the Angle icon in the On-
3. Input the required start time in hours, minutes, and
seconds from left to right.
Screen Display.
3. Use b / B to select a desired angle.
The number of the current angle appears on the
TV screen.
If you enter the wrong numbers, press b B to
/
move the under bar (_) to the wrong number. Then
enter the correct numbers.
Tip:
4. Press ENTER to confirm. Playback starts from the
selected time.
The ANGLE indicator will blink on the TV screen at
scenes recorded at different angles to indicate that
angle switching is possible.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
VR
Video
-RW
VR
3D Surround -RW
RAM +RW
PIP (Picture in Picture) HDD -RW
Video
-RW
-R
+R
DVD VCD DivX
RAM +RW
-R
+R
DVD
VCD
This unit can produce a 3D Surround effect, which
simulates multi-channel audio playback from two
conventional stereo speakers, instead of the five or
more speakers normally required to listen to multi-
channel audio from a home theater system.
This function enables you to view the stored stations
in sub picture during playback.
1. Press DISPLAY during playback. The On-Screen
Display appears on the TV screen.
2. Use v / V to select the Sound icon in the On-
Screen Display.
3. Use b / B to select “3D SUR”.
To turn off the 3D Surround effect, select
“NORMAL”.
Last Condition Memory DVD
On and off
This recorder memorizes the user settings for the last
disc that you have viewed. Settings remain in memory
even if you remove the disc from the recorder or
switch off the recorder. If you load a disc that had its
settings memorized, the latest stop position is
automatically recalled.
Press PIP to switch on the sub picture, press this
button again to switch it off.
Input mode selection for sub picture
Press AV/INPUT to select the input mode for the
sub picture. Each time this button is pressed, each
input mode for the sub picture is displayed as
shown below.
Notes:
– Settings are stored in memory for use any time.
– This recorder does not memorize settings of a disc
if you switch off the recorder before commencing to
play it.
Tuner
→
AV1
→
AV2
→
AV3
→
AV4
Program selection for sub picture
Use PR/CH (+/-) to change the program when sub
picture’s input is set to tuner. The selected program
number is displayed on the TV screen. You can
view the selected program by pressing STOP (x).
Sub picture position change
Press b / B repeatedly until desired position is
achieved. The sub picture moves clockwise or
counterclockwise.
Zoom Sub picture
Press ZOOM repeatedly to enlarge the sub picture,
the magnification level increases up to three steps.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Movie List menu options
Playing a DivX Movie File
1. Press v / V to select a folder/file on the [Movie
List] menu then press ENTER.
The recorder can play DivX files. Before playing DivX
files, read “DivX file requirement” on right.
[Movie List] menu options appear.
The menu options displayed differ depending on
the selected media.
1. Press HOME then select [MOVIE] option.
2. Select a media that contains DivX file(s) then
press ENTER.
2. Press v / V / b / B to select an option, and press
The [Movie List] menu appears on the TV screen.
ENTER.
ꢀ [Play] Start playback the selected title.
ꢀ [Open] Opens the folder and a list of files in the
folder appears.
ꢀ [Delete] Deletes the file(s) or folder(s) from the
media.
ꢀ [Rename] Edits the file name. (page 33)
ꢀ [Move] Moves the file(s) to another folder or
media. (page 34)
ꢀ [Copy] Copies the file(s) to another folder or
media. (page 34)
3. Press v / V to select a folder, and press ENTER.
A list of files in the folder appears. If you are in a
file list and want to return to the Folder list, use the
v / V buttons on the remote to highlight
press ENTER.
and
DivX file requirement
Available resolution size: 720x576 (W x H) pixel
DivX file extensions: “.avi”, “.divx”
Playable DivX subtitle: “.smi”, “.srt”,
“.sub (Micro DVD format only)”,
“.txt (Micro DVD format only)”
Playable Codec format: “DIV3”, “MP43”, “DIVX”,
“XVID”, “DX50”
4. If you want to view a particular file, press v / V to
highlight a file and press PLAY (N).
You can use variable playback functions. Refer to
pages 24-27.
5. Press STOP to stop the playback. The [Movie List]
menu appears.
Playable Audio format: “AC3”, “PCM”, “MP2”,
“MP3”, “WMA”
ꢀ Sampling frequency:
within 8 - 48 kHz (MP3), within 32 - 48kHz (WMA)
ꢀ Bit rate:
Notice for displaying the DivX subtitle
If the subtitle does not display properly, please follow
the steps below.
1. Press PAUSE/STEP when the subtitle appears.
within 8 - 320kbps (MP3), within 32 - 192kbps (WMA)
CD-R Format: ISO 9660 and JOLIET.
2. Press and hold SUBTITLE about 3 seconds.
The language code will appear.
DVD R/RW Format: ISO 9660 (UDF Bridge format)
Maximum Files/Disc: Less than 1999 (total number
of files and folders)
Notes on DivX format
3. Press b / B to select another language code until
the subtitle is displayed properly.
4. Press PLAY (N) to continue playback.
ꢀ If the number of the screen frame is over 29.97
frames per second, this unit may not operate
normally.
ꢀ If the video and audio structure of recorded file is
not interleaved, returns to the menu screen.
ꢀ If the file is recorded with GMC, the unit supports
only 1-point of the record level.
GMC?
*
GMC is the acronym for Global Motion
Compensation. It is an encoding tool specified in
MPEG4 standard. Some MPEG4 encoders, like
DivX or Xvid, have this option.
There are different levels of GMC encoding,
usually called 1-point, 2-point, or 3-point GMC.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio CD and Music menu options
Playing an Audio CD or MP3/WMA
file
1. Press v / V to select a folder/file on the Audio CD
or Music menu then press ENTER.
The menu options appear.
The recorder can play audio CDs and MP3/WMA files.
Before playing MP3/WMA files, read “MP3/WMA audio
file requirement” on right.
The menu options displayed differ depending on
the selected media.
2. Press v / V / b / B to select an option, and press
1. Press HOME.
ENTER.
The HOME menu appears.
ꢀ [Play] Start playback the selected title.
2. Select [MUSIC] option.
ꢀ [Random] Start or stop random playback.
3. Select a media that contains MP3/WMA or audio
title then press ENTER.
ꢀ [Open] Opens the folder and a list of files in the
folder appears
The [Music List] menu appears on the TV screen.
ꢀ [Delete] Deletes the file(s) from the media.
ꢀ [Rename] Edits the file name. (page 33)
ꢀ [Move] Moves the file(s) to another folder or
media. (page 34)
ꢀ [Copy] Copies the file(s) to another folder or
media. (page 34)
4. Use v/V to select a track then press PLAY (N).
Playback starts.
ꢀ [Program Add] Adds the track(s) to Program List.
(page 30)
You can use variable playback functions. Refer to
pages 24-27.
Random
Tips:
1. Press v / V to select a file then press ENTER.
ꢀ Press DISPLAY to view ID3-Tag information for
the MP3 file. If ID3-Tag information is not
present, [ID3-Tag: None] will appear. If you
select a folder, the number of subfolders and
number of MP3/WMA files in the folder are
displayed. Press DISPLAY again to remove the
information screen.
The menu options appear.
2. Press v / V to select [Random] option then press
ENTER.
The unit automatically begins random playback
and “RANDOM” appears on the menu screen.
3. To return to normal playback, select [Random]
option again then press ENTER.
ꢀ If you want to move to the upper directory, use
the v / V to highlight
ꢀ You also display HOME menu to select another
and press ENTER.
Tip:
By pressing SKIP > during Random playback, the
unit selects another track and resumes Random
playback.
media by pressing HOME.
5. To stop playback at any time, press STOP.
Tip:
You can create new folder. Select [New Album] option
on the Music-HDD menu then press ENTER.
“NONAME##” folder is created.
MP3/WMA audio file requirement
File extensions
“.mp3”, “.wma”.
Sampling frequency:
within 8 - 48 kHz (MP3), within 32 - 48kHz (WMA)
Bit rate:
within 8 - 320kbps (MP3), within 32 - 192kbps (WMA)
CD-R Format:
ISO 9660 and JOLIET.
DVD R/RW Format:
ISO 9660 (UDF Bridge format)
Maximum Files/Disc:
Less than 1999 (total number of files and folders)
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Program List menu options
Program Playback with Audio
CD and MP3/WMA file
1. Press v / V to select a track/file on the Program
List then press ENTER.
Program Playback enables you to make custom
playlists of Audio CD or MP3/WMA tracks. Programs
can contain up to 99 Audio CD tracks or 256
MP3/WMA files.
The menu options appear.
1. Use v / V to select a track/file (or folder) on the
Audio CD or Music menu.
You can select all MP3/WMA files and folders on
the Music menu by pressing CLEAR button. To
cancel the selections, press CLEAR again.
Selecting multiple files/tracks (folders)
1. Press MARKER.
2. Use v / V to select an option then press ENTER
A check mark appears on the file/track or
folder. Press MARKER again to cancel the
marked file/track or folder.
to confirm your selection.
ꢀ [Play] Playback begins in the order in which you
programmed the tracks from the selected track.
2. Repeat step 1 to mark additional file/track
(folders).
ꢀ [Random] Start or stop random playback.
ꢀ [Delete] Deletes the track(s) from the Program
List menu.
2. Press ENTER.
The options appear on the left side of the menu.
ꢀ [Move] Moves the track(s) to change the
program order.
3. Use v / V to select the [Program Add] option then
press ENTER.
ꢀ [Save] Memorizes the program list. (HDD only)
4. Repeat steps 1-3 to mark additional tracks.
Note:
Repeat Programmed Tracks
If you select a folder for Programmed Playback, all
tracks/files in the folder are added to the Program List.
Press REPEAT to select the desired Repeat mode.
ꢀ [TRACK] Repeats the current track.
ꢀ [ALL] Repeats all tracks on the Program List.
ꢀ [OFF] Cancels Repeat mode (no display).
Erasing a Track from the Program List
1. Select the track you wish to erase from the
Program List. Use MARKER button to select
multiple tracks.
2. Press ENTER. The menu options appears
3. Select [Delete] option then press ENTER.
5. Use B to move to the Program list.
The programmed track you selected last is
highlighted on the program list.
Changing Track Order in the Program List
1. Select the track you wish to move on the Program
List. Use MARKER button to select multiple tracks.
2. Press ENTER. The menu options appears
3. Select [Move] option then press ENTER.
4. Use v / V to move the yellow bar to the desired
location, then press ENTER.
6. Use v / V to select the track you want to start
playing.
7. Press PLAY (N) to start.
Playback stops after playing the last programmed
track in the program list.
8. To exit Program Playback and resume normal
playback, select a track on the List and press
PLAY (N).
Save Your Program List (HDD only)
This recorder memorizes the user program list that
you have programmed.
Tip:
1. Select a track on the Program List.
The menu options appear.
You can access or remove the Program List screen by
pressing MENU/LIST.
2. Select [Save] option then press ENTER.
The Program List is saved in the HDD’s
PROGRAM folder.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Photo List menu options
Viewing a JPEG File
1. Press v / V to select a file on the [Photo List]
menu then press ENTER.
The recorder can play JPEG files. Before playing
JPEG recordings, read “Photo file requirement” on
right.
The menu options appear.
The menu options displayed differ depending on
the selected media.
You can select all files and folders on the menu by
pressing CLEAR button. To cancel the selections,
press CLEAR again.
1. Press HOME.
The HOME menu appears.
2. Select [PHOTO] option.
3. Select a media that contains JPEG file then press
ENTER.
Selecting multiple files (folders)
1. Press MARKER.
The [Photo List] menu appears on the TV screen.
A check mark appears on the file or folder.
Press MARKER again to cancel the marked file
or folder.
2. Repeat step 1 to mark additional file (folders).
2. Use v / V to select an option then press ENTER
to confirm your selection.
ꢀ [Open] Opens the folder and a list of files in the
folder appears
4. Use b / B / v / V to select a file, then press
ꢀ [Full Screen] Shows the selected file as full
screen.
ENTER.
The menu options appear on the left side of the
menu.
ꢀ [Delete] Deletes the selected file from the media.
ꢀ [Slide Show] Displays Slide Show menu.
ꢀ [Rename] Edits the file name. (page 33)
Tips:
ꢀ If you want to move to the upper directory, use the
ꢀ [Move] Moves the file(s) to another folder
(album) or media. (page 34)
v / V to highlight
and press ENTER.
ꢀ You can also display HOME menu to select another
media by pressing HOME.
ꢀ [Copy] Copies the file(s) to another folder or
media. (page 34)
5. Use v / V to select [Full Screen] then press
ENTER.
Tip:
You can create new folder in the HDD. Select [New
Album] option then press ENTER. “NONAME##”
folder is created.
The selected image is displayed in full screen.
Depending upon the size and number of JPEG
files, it could take a long time for the recorder to
read the files.
Photo file requirement
File extensions
“.jpg”
Photo size:
Less than 4MB recommended
CD-R Format:
ISO 9660 and JOLIET.
DVD R/RW Format:
ISO 9660 (UDF Bridge format)
Press ENTER to appear or disappear this menu
during viewing the full screen.
Maximum Files/Disc:
Less than 1999 (total number of files and folders)
6. To stop viewing at any time, press STOP.
The [Photo List] menu appears.
Notes on JPEG file
Progressive and lossless compression JPEG image
files are not supported.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Skip Images
While viewing a picture, press SKIP (.or >)
once to advance to the next file or return to the
previous file.
To listen to music while slide show
simultaneously
You can display photo files while listening to
MP3/WMA music files recorded on HDD.
Rotate Images
Use v / V while viewing a picture to flip the picture
1. Select [Slide Show] option on the [Photo List] menu
(Refer to “[Photo List] menu options” on page 31).
clockwise or counterclockwise.
2. Press ENTER.
The Slide Show menu appears.
View Slide Shows
1. Select [Slide Show] option on the [Photo List] menu
(Refer to “Photo List menu options” on page 31).
3. Select [Simultaneous Music play] option on the
Slide Show menu
2. Press ENTER.
The Slide Show menu appears.
4. Press ENTER.
Simultaneous Music play menu appears.
5. Press MARKER to select multiple files.
ꢀ Select [Select All] option to select all tracks then
press ENTER.
3. Use b / B / v / V to set the options.
[Object] option:
ꢀ [Selected] Views slide show only selected files.
Use the MARKER button to select multiple files.
ꢀ Select [Deselect All] option to deselect all
selected tracks then press ENTER.
ꢀ Select [Cancel] option to exit this menu then
press ENTER.
ꢀ [All] Views slide show all files.
[Speed] option:
Sets the Slide Show speed to [Slow], [Normal], or
[Fast].
6. Use b / B / v / V to highlight [Start] option then
press ENTER.
4. Select the [Start] option then press ENTER to start
the Slide Show.
5. Press STOP to stop the Slide Show and returns to
the [Photo List] menu.
To Pause the Slide Show
1. Press PAUSE/STEP (X) to pause slide show.
2. When you want to continue slide show, press
PLAY (N).
7. Press STOP to stop the Slide Show and return to
the [Photo List] menu.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Naming a file on the HDD
Editing a MP3/WMA, JPEG, DivX
file
These descriptions are MP3 file’s operation for
example, other kind’s files are operated same way.
You can name MP3/WMA files on the HDD
independently. Names can be up to 32 characters
long.
1. Select a file you wish to rename on the menu.
2. Press ENTER.
Erasing a file(s)/folder(s) from the HDD
The menu options appear on the menu.
You can erase MP3/WMA, JPEG or DivX file(s)/
folder(s) on the HDD.
3. Select [Edit] option then press ENTER.
Edit options appears.
1. Select a file you wish to erase on the menu.
You can select all files and folders on the menu by
pressing CLEAR button. To cancel the selections,
press CLEAR again.
Selecting multiple files (folders)
1. Press MARKER.
A check mark appears on the file or folder.
Press MARKER again to cancel the marked file
or folder.
2. Repeat step 1 to mark additional file (folders).
4. Select [Rename] option then press ENTER.
Keyboard menu appears.
2. Press ENTER.
To enter characters, see page 47.
The menu options appear on the menu.
3. Select [Delete] option then press ENTER.
The selected file(s) is deleted.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Copying a file(s) to another media or
folder
Moving a file(s)
You can move a file(s)/folder(s) to another media or
folder. After moving, the file(s)/folder(s) are deleted
from the current location.
You can copy a file(s)/folder(s) to another media or
folder.
1. Follow steps 1-3 as shown left.
1. Select a file you wish to copy on the menu.
You can select all files and folders on the menu by
pressing CLEAR button. To cancel the selections,
press CLEAR again.
2. Press ENTER.
The options appear on the left side of the menu.
3. Select [Move] option then press ENTER.
Move menu will appear.
Selecting multiple files (folders)
1. Press MARKER.
A check mark appears on the file or folder.
Press MARKER again to cancel the marked file
or folder.
2. Repeat step 1 to mark additional file (folders).
2. Press ENTER.
The menu options appear on the menu.
3. Select [Edit] option then press ENTER.
Edit options appears.
4. You can select a album (folder) to move.
4. Select [Copy] option then press ENTER.
Copy menu appears.
1. After selecting a media then press ENTER.
The album (folder) list appears.
2. Select a folder.
Also, you can create new album (folder). Select
[New Album] option on the Move menu then
press ENTER.
“NONAME##” folder is created.
5. Select [Move] option then press ENTER to begin
moving.
5. You can select a album (folder) to copy.
1. After selecting a media then press ENTER.
The album (folder) list appears.
2. Select a folder.
Also, you can create new album (folder). Select
[New Album] option on the Copy menu then
press ENTER.
“NONAME##” folder is created.
6. Select [Copy] option then press ENTER to begin
copying.
Note:
If a folder’s depth is more than 5 level, the copy is not
available.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Note:
Recording
ꢀ The maximum number of titles that can be recorded
on the HDD is 255.
About DVD recording
ꢀ Using the HDD allows you to record a maximum of
12 hours continuously.
Notes:
ꢀ This recorder cannot make recordings on CD-R or
CD-RW discs.
Notes for recording
ꢀ The recording times shown are not exact because
the recorder uses variable bit-rate video
compression. This means that the exact recording
time will depend on the material being recorded.
ꢀ When recording a TV broadcast, if the reception is
poor or the picture contains interference, the
recording times may be shorter.
ꢀ Our company takes no responsibility for recording
failure due to power outages, defective discs, or
damage to the Recorder.
ꢀ Fingerprints and small scratches on a disc can
affect playback and/or recording performance.
Please take proper care of your discs.
ꢀ If you record still pictures or audio only, the
recording time may be longer.
ꢀ The displayed times for recording and time
remaining may not always add up to exactly the
length of the disc.
ꢀ The recording time available may decrease if you
heavily edit a disc.
ꢀ If using a DVD-RW disc, make sure you change the
recording format (Video mode or VR mode) before
you record anything on the disc. See page 21 (Disc
Format) for how to do this.
Disc types and recording formats, modes,
and settings
This recorder can play five different kinds of DVD
discs: pre-recorded DVD-Video discs, DVD-RW,
DVD-R, DVD-RAM, DVD+RW and DVD+R discs. The
disc format for DVD-R, DVD+R, DVD+RW discs is
always “Video format”—the same as pre-recorded
DVD-Video discs. This means that once finalized, you
can play a DVD-R, DVD+R, or DVD+RW in a regular
DVD player. The DVD-RAM disc format is Video
Recording (VR) format.
ꢀ When using a DVD-R or DVD+R disc, you can keep
recording until the disc is full, or until you finalize the
disc. Before you start a recording session, check
the amount of recording time left on the disc.
ꢀ When using a DVD-RW disc in Video mode,
recording time available will only increase if you
erase the last title recorded on the disc.
ꢀ The Delete Title option in the Title List (Original)
menu only hides the title, it does not actually erase
the title from the disc and increase the recording
time available (except for the last recorded title on a
DVD-RW disc in Video mode).
By default, the DVD-RW disc format is Video format,
though you can change this to Video Recording (VR)
format, if required. (Reinitializing the disc will erase
the contents of the disc.)
The recording mode is closely related to the disc
format. If the disc format is Video Recording format,
then the recording mode is VR mode; if the disc
format is Video mode, then the recording mode is
Video mode (except for DVD-Video, which is not
recordable, and so does not have a recording mode).
Within the recording modes (which are fixed for them
whole disc) are the record settings. These can be
changed as required for each recording and
determine the picture quality and how much space the
recording will take up on the disc.
ꢀ Overwrite recording is available using DVD+RW
discs.
ꢀ
When using a DVD+R/RW, the recorder will execute
the Menu-making operation to update the new title
and editing when removing the disc from the recorder
or turn off the recorder. So you must remove the disc
after selecting the recorder’s operation mode to DVD
mode.
About HDD recording
Recording to the internal hard disk drive (HDD) is
basically similar to recording to a VR mode DVD-RW
disc. You have the full choice of recording quality
options, including the manual mode, and of course
you can record, erase and re-record as many times as
you like. The capacity of the hard disk drive means
that you can store many hours of video on it, even in
the higher quality recording modes. To help you
organize the contents, the HDD is divided into ten
genre. You can name and use these genres as you
like—for example, you might have a genre for movies,
another for TV shows, and one for camcorder
recordings.
Recording time and picture quality
There are four preset recording quality modes:
ꢀ XP – Highest quality setting, gives about
1 hour of recording time on a
DVD (4.7GB).
ꢀ SP – Default quality, sufficient for most applications,
gives about 2 hours of recording time on a DVD (4.7GB).
ꢀ LP – Slightly lower video quality, gives about 4 hour
of recording time on a DVD disc (4.7GB).
ꢀ EP – Lowest video quality, gives about 6 hour of
recording time on a DVD (4.7GB).
You may see a fragmented picture during playing
back the contents recorded in EP mode .
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Clip Record HDD
Timeshift HDD
Do not miss a scene from a live broadcast. If the
telephone rings while you are watching your favorite
live broadcast, just press “TIMESHIFT” and “PAUSE”
before answering the phone. The timeshift function will
be activated and the broadcast is then recorded for
later viewing.
After the phone call or viewing interruption, press
“PLAY” or “SCAN” to watch the program.
Press “STOP” to return to the live broadcast.
You can edit during Timeshift to store the program on
the HDD (Hard Disk Drive).
1. During Timeshift, use pause step, search and
slow-motion to find the starting point.
2. Press REC at the starting point of the section you
want to record.
Progress of the edit is indicated in red on the
Progress Bar.
Timeshift (Pause, Live TV/Playback)
Operation HDD
3. Use pause step, search and slow-motion to find
the ending point.
You can store a program in the HDD storage cache
temporarily.
4. Press REC at the ending point of the section you
want to record.
Press TIMESHIFT while watching a TV program.
The Progress Bar display appears on the screen as
shown below. The Progress Bar changes to timeshift
icon after 5 seconds.
Normal playback continues.
5. Repeat steps 1 and 4 to make several Clip
Records of a program.
1
2
6. Press STOP to stop Timeshift.
Confirm message will appear.
3
4
5
7. Use b / B to select [Yes] then press ENTER. Or,
press STOP again.
1. Indicates playback mode.
The current broadcast is displayed on the screen.
2. Indicates current Timeshift position.
3. Indicates Timeshift start time.
4. Indicates Timeshift elapsed time.
Notes:
ꢀ Selected sections are recorded on the HDD.
ꢀ If you want to stop Clip recording, press the STOP
button. If you press POWER to stop Clip recording,
the program may not be recorded on the HDD.
ꢀ Clip records cannot be made for sections lasting
less than 5 seconds.
5. Indicates the time that is one hour from Timeshift
start time.
Tips:
ꢀ You can use trick play functions (Slow, Scan, etc.)
during timeshift. Refer to Playback Operation on
pages 24-27.
Jump to Start or End during Timeshift
ꢀ You can edit the cached clip during Timeshift to
retain the program on the HDD. Refer to Clip
Record on the right.
1. Press ENTER during timeshift. The menu will
appear.
2. Press b and playback starts from the very
beginning of the timeshift.
Notes:
Press B and jumps to the very end of the timeshift
then goes to pause mode.
ꢀ There is not free space on the HDD, the oldest
timeshift section of the cache will be incrementally
deleted.
To Exit the Timeshift
ꢀ If no button is pressed for 6 hours, the Timeshift will
stop automatically.
1. Press STOP to exit Timeshift function.
Confirm message will appear.
2. Use b / B to select [Yes] then press ENTER.
The current broadcast is displayed on the screen.
Marker Search in Timeshift mode
You can mark one in Timeshift mode. Press MARKER
at the desired point during Timeshift.
Press SEARCH to recall the marked scene.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
To Pause the Recording
Basic Recording from a TV
Follow the instructions below to record a TV program.
Recording starts immediately and continues until the
disc is full or you stop the recording.
1. Press PAUSE/STEP (X) to pause recording.
2. When you want to continue recording, press
PAUSE/STEP (X).
To record one TV program while
watching another
Note:
You must load a recordable disc for DVD recording.
1. Press TV/DVD to select the TV mode during
recording. The TV indicator appears.
2. Using the TV, select the channel to be viewed.
1. Press HOME.
The HOME menu appears.
2. Select [TV] option.
Instant Timer Recording
Instant Timer Recording allows you to make a
recording easily of a preset length without using the
program timer.
3. Select [TV HDD] or [TV DVD] option then press
ENTER.
Also make sure that the TV input is set to this
recorder.
If you load a completely blank disc, the recorder
takes a short while to initialize the disc.
1. Follow steps 1-5 as shown left (Basic Recording
from a TV).
4. Set a recording mode as necessary by pressing
REC MODE repeatedly. (XP, SP, LP, EP)
2. Press REC (z) repeatedly to select the recording
5. Use PR/CH (+/-) buttons to select the TV channel
to record.
time length.
Changing TV Audio Channel
You can select the audio channel (language) to listen
by pressing AUDIO during viewing TV program. The
current audio channel is displayed on-screen.
Recording starts after the first press. Each
subsequent press increases the recording time
within free space (maximum 240 minutes).
The recording time is displayed on the TV screen.
At the end of the recording, the recorder will stop
recording and shut off.
Stereo or mono broadcast:
Stereo → Left → Right → Mono
Bilingual broadcast:
Main → Sub → Main+Sub
ꢀ For TV recording with bilingual, set audio channel
from the [TV Rec Audio] in sub-menu of the Setup
menu (see page 21).
Checking the Recording Time
Press REC (z) once to check the recording time. The
recalled setting will automatically return to the TV
screen for a moment.
Also, remaining time of recording is shown in the
display window.
ꢀ If the sound is of poor quality when set to Stereo,
you can often improve it by changing to Mono (Left
or Right).
ꢀ This recorder can record either NICAM or regular
audio. If the NICAM setting (page 17) is set to Auto,
then if the broadcast is NICAM, the audio
automatically changes to NICAM and you can
record the NICAM audio. If the broadcast is non-
NICAM, the regular audio is always recorded. If
NICAM sound distortion occurs, due to poor
reception, you can switch off NICAM setting of the
program.
To Extend the Recording Time
The recording time can be extended anytime by
pressing REC (z).
Each subsequent press increases the recording time
within free space (maximum 240 minutes).
Caution
If the recorder is unplugged (or there is a power
failure) while the recorder is recording, the recording
will be lost.
6. Press REC (z) once.
Recording will start. (The REC indicator lights in
the display window.)
ꢀ Recording continues until you press STOP (x)
or the disc or HDD is full.
ꢀ To record for a fixed length of time, see Instant
Timer Recording on right.
7. Press STOP (x) to stop recording.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Enter the necessary information for your timer
recording(s).
Timer Recording
This recorder can be programmed to record up to 16
programs within a period of 1 month. For unattended
recording, the timer needs to know the channels to be
recorded, the starting and ending time.
ꢀ b / B (left/right) – move the cursor left/right
ꢀ v / V (up/down) – change the setting at the
current cursor position
ꢀ Press RETURN (O) to exit the Timer Record
menu.
ꢀ Press ENTER after filling in all the program
information.
ꢀ Press TIMER REC to display Timer Record List.
Note:
If you use a completely blank disc for timer recording,
you must format the disc before starting timer
recording. (Refer to “Disc Format” on page 21.)
3. Set a recording mode as necessary by pressing
REC MODE repeatedly. (XP, SP, LP, EP)
1. Press TIMER REC.
The Timer Record menu will appear.
4. Press ENTER, the program will be memorized by
the recorder.
To check the programming, the Timer Record List
will appear.
Check field’s “Rec. OK” on the Timer Record List
indicates that the timer recording is programmed
correctly.
ꢀ [Media] Choose a media to record (HDD or
DVD).
5. Press RETURN (O) to exit the Timer Record List.
6. Make sure that you load a recordable disc for DVD
recording and press POWER to switch your unit to
Standby.
ꢀ [PR] Choose a memorized program number, or
one of the external inputs from which to record.
(You cannot select DV input.)
Notes:
ꢀ [Date] Choose a date up to 1 month in advance.
ꢀ [Start Time] Set the start time.
ꢀ The timer indicator lights in the display window
when the recorder is in standby with the timer
active. (Nothing is displayed while the [Power Save
Mode] is ON.)
ꢀ For TV recording with bilingual, set audio channel
from the [TV Rec Audio] in sub-menu of the Setup
menu (see page 21).
ꢀ [End Time] Set the end time.
ꢀ [Repeat] Choose a desired repeat (Once,
Daily (Monday - Friday), or Weekly).
ꢀ [PDC] The PDC system automatically adjusts
the recording time so that even if a program is
not running to schedule, you won’t miss it. For
PDC to work properly, you must input the
correct announced time and date of the
program you want to record.
ꢀ You must press POWER to stop the timer recording.
ꢀ If you set a timer recording to record to DVD but
there isn’t a recordable DVD loaded at the time of
the recording, the Recovery Recording feature will
automatically record the program to the HDD for
you.
Note that PDC may not work with every station.
Notes:
ꢀ Stations that use PDC typically include PDC
information in the teletext TV guide pages.
Please refer to these pages when setting a
timer recording.
ꢀ When using PDC, there may be instances
where the beginning of the program is not
recorded.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
3. You can change the information as required using
b / B / v / V (Media, PDC, etc.)
Timer Recording with
VIDEO Plus+ System
Refer to “Timer Recording” on previous page.
This system makes programming timer recordings
very simple. Most TV guides publish VIDEO Plus+
programming numbers with their program details.If
you want to make a timer recording of a program, you
just input the corresponding VIDEO Plus+
programming number. The date, start, stop and
channel settings are made automatically. All you have
to do is tell the recorder the recording mode, and
whether it’s a once-only recording, or a regular
recording.
4. Choose a record mode (XP, SP, LP, or EP).
5. Press ENTER, the program will be memorized by
the recorder.
To check the programming, the Timer Record List
will appear.
Check field’s “Rec. OK” on the Timer Record List
indicates that the timer recording is programmed
correctly.
Up to 16 timer programs can be stored in the
recorder.
VIDEO Plus+ and PlusCode are registered
trademarks of Gemstar Development Corporation.
The VIDEO Plus+ system is manufactured under
license from Gemstar Development Corporation.
6. Press RETURN (O) to exit the Timer Record
menu.
7. Make sure that you load a recordable disc for DVD
recording and press POWER to switch your unit to
Standby.
1. Press VIDEO Plus+ button.
The VIDEO Plus+ menu will appear.
Press VIDEO Plus+ button again to exit the menu.
ꢀ [Number] Enter the VIDEO Plus+ programming
number.
2. Use the number buttons then press ENTER to
enter the VIDEO Plus+ programming number.
To check the programming, the Timer Record
menu will appear.
ꢀ If you make a mistake before pressing ENTER,
press CLEAR repeatedly to delete password
numbers one by one then correct it.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
If two or more timer programs overlap:
ꢀ The earlier program takes priority.
ꢀ When the earlier program finishes, the later
program starts.
ꢀ If two programs are set to start at exactly the same
time, the program entered first takes priority.
Checking Timer Recording
Details
Programming can be checked whenever the recorder
is turned on. Press TIMER REC twice.
ꢀ Use v / V to select a timer recording.
If the disc is damaged, the recording may not
complete successfully. In this case even though the
Check field shows “Rec. OK”, it may not be.
ꢀ Press ENTER to edit the selected program.
Timer Record menu appears.
ꢀ Press CLEAR to delete the selected program
from the Timer Record List.
Recording from an External
Input
Recording from External Components
You can record from an external component, such as
a camcorder or VCR, connected to any of the
recorder’s external inputs.
1. Make sure that the component you want to record
from is connected properly to the recorder. See
page 14-15.
2. Choose a media (TV HDD or TV DVD) to record
using HOME menu. (see page 16).
Canceling a Timer Recording
You can clear a timer setting anytime before the
recording actually starts.
3. Press AV/INPUT repeatedly to select the external
input to record from.
ꢀ Use v / V to select a program you want to erase on
the Timer Recorder List. If you want to erase the
program, press CLEAR.
ꢀ Tuner: Built-in tuner
ꢀ AV1: EURO AV1 AUDIO VIDEO mounted on
back panel
ꢀ AV2: EURO A/V2 DECODER mounted on back
panel
Stopping a Timer Recording in Progress
ꢀ AV3: AV IN 3 mounted on back panel
ꢀ AV4: AV IN 4 (VIDEO, AUDIO (L/R), S-VIDEO
IN) mounted on front panel
After a timer recording has started, you can still
cancel the program.
ꢀ Press POWER.
ꢀ DV: DV IN mounted on front panel
Timer Recording Troubleshooting
4. Select the recording mode as necessary by
pressing REC MODE repeatedly. (XP, SP, LP, or
EP)
Even though the timer is set, the recorder will not
record when:
ꢀ There is no disc loaded and there is not free space
on the HDD.
ꢀ A non-recordable disc is loaded and there is not
free space on the HDD.
ꢀ [Disc Protect] option is set to [ON] in the Setup
menu and there is not free space on the HDD. (see
page 22).
5. Press REC (z) once.
Recording will start. (The REC indicator lights in
the display window.)
ꢀ Recording continues until you press STOP (x)
or the disc is full.
ꢀ To record for a fixed length of time, see “Instant
Timer Recording” on page 37.
ꢀ Power is turned on.
6. Press STOP (x) to stop recording.
ꢀ There are already 99 titles (DVD-RW, DVD-R,
DVD-RAM), 49 titles (DVD+R, DVD+RW) recorded
on the disc and there are already 255 titles
recorded on the HDD.
You cannot enter a timer program when:
ꢀ A recording is already underway.
ꢀ The time you’re trying to set has already passed.
ꢀ There are already 16 timer programs set.
Note:
If your source is copy-protected using CopyGuard,
you will not be able to record it using this recorder.
See Copyright on page 51 for more details.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Make sure your digital camcorder is connected to
the front panel DV IN jack. See page 15.
Recording from DV Input
Before DV dubbing
2. Select [TV HDD] or [TV DVD] option on the HOME
menu then press ENTER. (see page 16).
You can connect a DV-equipped camcorder to this
recorder using a single DV cable for input and output
of audio, video, data and control signals.
ꢀ This recorder is only compatible with DV-format
(DVC-SD, DV25) camcorders. Digital satellite tuners
and Digital VHS video recorders are not compatible.
ꢀ You cannot connect more than one DV camcorder
at a time to this recorder.
3. Check that the DV audio input is as you require.
You can choose between Audio 1 (original audio)
and Audio 2 (overdubbed audio).
ꢀ DV Input is set from the [DV Rec Audio] in
sub-menu of the Setup menu. See “DV
Recording Audio” on page 21 for more
information.
ꢀ You cannot control this recorder from external
equipment connected via the DV IN jack (including
two recorders).
ꢀ It may not always be possible to control the
connected camcorder via the DV IN jack.
ꢀ Digital camcorders can usually record audio as
stereo 16-bit/48kHz, or twin stereo tracks of 12-
bit/32kHz. This recorder can only record one stereo
audio track. Set [DV Rec Audio] option to [Audio 1]
or [Audio 2] as required (see page 21).
4. Press AV/INPUT repeatedly to select the DV input.
DV appears in the display window and on the TV
screen.
5. Find the place on the camcorder tape that you
want to the recording to start from.
For best results, pause playback at the point from
which you want to record.
ꢀ Depending on your camcorder, you can use this
recorder’s remote to control the camcorder
using the STOP, PLAY and PAUSE functions.
ꢀ Audio input to the DV IN jack should be 32 or
48kHz (not 44.1kHz).
6. Press REC (z) once to start recording.
ꢀ Picture disturbance on the recording may occur if
the source component pauses playback or plays an
unrecorded section of tape, or if the power fails in
the source component, or the DV cable becomes
disconnected.
ꢀ Recording is automatically stopped if the
recorder detects no signal.
ꢀ You can pause or stop the recording by
pressing PAUSE/STEP (X) or STOP (x).
You cannot control the camcorder from this
remote control during recording.
ꢀ In Video mode, the final frame of the recording
may remain displayed on screen for a while
after recording stops.
Recording from a Digital Camcorder
You can record from a digital camcorder connected to
the DV IN jack on the front panel of this recorder.
Using the recorder’s remote, you can control both the
camcorder and this recorder.
Before recording, make sure that the audio input for
the DV IN jack is set up (see page 21).
Troubleshooting
If you cannot get a picture and/or audio through the
DV IN jack, check the bullet points:
ꢀ Make sure the DV cable is properly connected.
ꢀ Try switching off the connected equipment then
switch back on.
Tips:
ꢀ The source signal must be DVC-SD format.
ꢀ Some camcorders cannot be controlled using this
recorder’s remote.
ꢀ Try switching the audio input.
ꢀ If you connect a second recorder using a DV cable,
you cannot control the second DVD from this one.
ꢀ You cannot control this unit remotely from a
component connected to the DV IN jack.
ꢀ You cannot record date and time information from a
DV cassette.
Note:
Depending on the connected camcorder, you may not
be able to control it using the remote control supplied
with this recorder.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Simultaneous recording and
playback
Playback another title during recording
Playback and recording for both DVD and built in hard
disk drive (HDD) are completely independent. For
example, you can record to either the DVD or HDD
source and play back video from the other source at the
same time.
1. Start recording.
2. Press HOME to display the Home Menu screen.
3. Use the v / V / b / B and ENTER buttons to
select a different media type that you want to play
back.
4. Start Playback.
The recording will continue while playing back the
media from the other mode.
Notes:
ꢀ You can’t use simultaneous playback and
recording while copying.
ꢀ You cannot edit programs during simultaneous
recording and playback.
Time Slip HDD
You can play back the current title in recording
simultaneously.
1. Start HDD recording.
2. Press PLAY (N).
The playback starts and the recording will continue
while playing back.
ꢀ You can use PAUSE (X) and SCAN (m / M)
buttons for pause, scan, slow-motion during
playback.
3. Press STOP (x).
The playback will stop then returns to the current
recording position.
Notes:
ꢀ Playback cannot be started until 15 seconds
after recording starts.
ꢀ This function does not work in DVD recording
mode.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
1 2 3
4 5
6 7
Editing
Title List and Chapter List Menu
Overview
Using the Title List menu you can edit video content.
The editing features available in the Title List menu
depend on whether you are editing video on DVD, or
the HDD, and whether you’re editing Original content,
or a Playlist.
There are two ways to edit VR mode DVD-RW discs.
You can directly edit the Original content of the disc,
or you can create and edit a Playlist. The Playlist
doesn’t actually change any of the content on the
disc, but just controls how the content is played back.
Editing material recorded on the HDD is similar to
editing the Original content of a VR mode DVD-RW,
with similar commands for erasing and naming titles,
as well as fine control over the content of chapters
within titles for DVD disc.
1. Menu options: To display menu option, select a
title or chapter then press ENTER. The options
displayed differ depending on the disc type.
ꢀ[Combine] Combines two titles or chapters into one
(page 48, 49).
ꢀ[Delete] Deletes the title or chapter. (page 46)
ꢀ[Delete Part] Deletes a part of the Title (page 46).
ꢀ[Divide] Divides a title into two (page 49).
ꢀ[Dubbing] Copies the title to another media. (page 52)
ꢀ[Full Play] Starts playback of the selected title
including the hidden chapters.
Note:
During recording, if you display the Title List menu for
the HDD, some of the titles may appear with a mark.
These titles were recorded with a Line Input setting
different to the current setting of the recorder.
During recording, these titles cannot be played.
ꢀ[Hide (Show)] Hides (or Shows) the selected title or
chapter. (page 50)
ꢀ[Move] Moves a chapter on the Chapter List-Playlist
menu to a position on the menu. (page 50)
ꢀ[Play] Start playback of the selected title or chapter.
The hidden titles and chapters on the DVD+R/RW
cannot be play back.
ꢀ[Playlist Add] Adds the title or chapter to the Playlist.
(page 45)
ꢀ[Protect] Protects accidental recording, editing or
deleting of the title. (page 50)
ꢀ[Rename (Title Name)] Edits the title name. (page 47)
ꢀ[Search]
- [Chapter]; Displays Chapter List of the Title.
- [Time]; Search time for you want start point
of the title. (page 47)
1. Press MENU/LIST to display the Title List menu.
Playback should be stopped when you do this.
ꢀ You can also access it using HOME menu,
select [MOVIE] option then select [HDD] or
[DVD] option and press ENTER.
ꢀ When selecting titles, use the v / V buttons to
display the previous/next page if there are more
than six titles.
ꢀ If you are editing a VR mode disc, press
MENU/LIST to switch between Original and
Playlist menu.
ꢀ[Sort] Lists the programs on the Title List menu by
Date, Title, or Category. (page 48)
ꢀ[Title] Displays Title List of the chapter.
On the left side of the screen are the menu options.
The main part of the screen shows thumbnails of the
titles (or chapter) on the DVD or HDD. You can
change these thumbnails using the THUMBNAIL
button—see Changing Title Thumbnails on page 44.
ꢀ[Undo]/[Redo] Un-do/Re-do the last deletion/ action.
(page 48)
2. Indicates the record mode, free space, and
elapsed time progress bar.
3. Current media
4. Currently selected title.
5. Thumbnail
6. Shows the selected title number and total number
of titles.
7. Shows the title name, recorded date, and
recording length.
Press DISPLAY to display the information of selected
title on the Title List menu.
After selecting a title or chapter on the Title List or
Chapter List menu, then press ENTER. The menu
options appears on the left side of the menu. Use
v / V to select a option then press ENTER to confirm
your selection.
2. To exit the Title List menu, press RETURN (O)
repeatedly.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
HDD, VR Mode: Original and
Playlist Editing
Adding Chapter Markers
VR
HDD -RW
RAM
+RW
+R
Titles, Chapters and Parts
You can create chapters within a title by inserting
chapter marks at the desired points.
Titles in the disc’s original content contain one or
more chapters. When you insert a disc’s title into the
Playlist, all the chapters within that title also appear. In
other words, chapters in the Playlist behave exactly as
chapters on a DVD-Video disc do. Parts are sections
of Original or Playlist titles. From the Original and
Playlist menu you can add or delete parts. Adding a
chapter or title to the Playlist creates a new title made
up of a section (ie., chapter) of an Original title.
Deleting a part removes part of a title from the
Original or Playlist menu.
Note:
Chapter markers are inserted at regular intervals
automatically. You can change this interval from the
Initial Setup menu (see “Auto Chapter” on page 21).
During recording or playing back, at the point you
want to start a new chapter, press CHP ADD.
A chapter marker icon appears on the TV screen.
Caution
Changing Title Thumbnails
ꢀ When editing using the Delete, Add and Move
functions, the start and end frames may not be
exactly as set in the start and end point display.
ꢀ During Playlist playback, you may notice a
momentary pause between edits. This is not a
malfunction.
VR
HDD -RW
RAM
+RW
+R
Each title displayed in the Title List menu is
represented by a thumbnail picture taken from the
start of that title or chapter.
Is editing a DVD like editing a video
tape?
No. When you edit a video tape you need one video
deck to play the original tape and another to record
the edits. With DVD, you edit by making a ‘Playlist’ of
what to play and when to play it. On playback, the
Recorder plays the disc according to the Playlist.
If you prefer, select a different still picture from within
a title.
Press THUMBNAIL to make the currently displayed
picture the one that appears in the Title List menu.
The still picture that you choose appears in both the
Original or Playlist menu.
Tip:
You can also change the thumbnail picture of the title
on the Chapter List menu. Select a chapter on the
Chapter List menu then press THUMBNAIL. The
thumbnail picture of the title that includes the chapter
is changed.
About word ‘Original’ and ‘Playlist’
VR
-RW
RAM
Throughout this manual, you will often see the words
Original and Playlist to refer to the actual content and
the edited version.
ꢀ Original: content refers to what’s actually recorded
on the disc.
ꢀ Playlist: content refers to the edited version of the
disc — how the Original content is to be played.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Making a New Playlist
Adding Additional Title/Chapters
VR
-RW
VR
-RW
RAM
RAM
to the Playlist
Use this function to add an Original title or chapter to
the Playlist. When you do this, the whole title is put
into the Playlist (you can delete bits you don’t need
later — see Deleting an Original or Playlist
title/chapter on page 46).
You can add an Original title or chapter to add to a
Playlist title even if it is already registered.
1. Choose a title or chapter on the Title List-Original
menu or Chapter List-Original menu to put into the
Playlist, then press ENTER.
The title appears in the Playlist complete with the
chapter markers that appear in the Original. However,
if you add more chapter markers to the Original later,
these are not automatically copied over into the
Playlist title.
The menu options appears on the left side of the
screen.
You can add up to 999 chapters to one disc . If you
only want to add a chapter of a title, use the Adding a
title/chapter to the Playlist on this page.
1. Choose a title or chapter on the Title List-Original
menu or Chapter List-Original menu to put into the
Playlist, then press ENTER.
The menu options appears on the left side of the
menu.
2. Use v / V to select [Playlist Add] from menu
options then press ENTER.
2. Use v / V to select [Playlist Add] option then press
3. Choose a Title List-Playlist that is already
registered to insert a title or chapter, then press
ENTER.
ENTER.
4. Repeat steps 1-3 to add additional title or chapter
on the Playlist.
You can view the added chapters on the Chapter
List-Playlist menu.
3. Select [New Playlist] then press ENTER.
The new title appears in the updated Playlist. All
chapters of the title are added to the Playlist.
5. Press RETURN (O) to exit, or MENU/LIST to go
back to the Title List-Original menu.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
VR
HDD -RW
RAM
Deleting an Original or Playlist
Title/Chapter
Deleting a Part
You can delete a part which you do not want in the
title.
When you erase a title or chapter from the Playlist
menu, you only remove it from the Playlist; the
title/chapter remains in the Original menu.
1. Use b / B / v / V to choose a title you want to
delete on the Title List menu then press ENTER.
The options appears on the left side of the menu.
If you choose to delete a title or chapter from the
Original (title/chapter) menu, the title or chapter is
actually deleted from the disc and the remaining time
available for recording increases. Titles/chapters
deleted from the Original are also removed from the
Playlist.
2. Select [Delete Part] option then press ENTER.
Edit (Delete Part) menu appears on the TV screen.
[Start Point] icon is highlighted.
Example: Edit (Delete Part) (HDD)
Note:
It may not be possible to delete chapters that are less
than 5 seconds long.
1. Use b / B / v / V to choose a chapter or title you
want to delete on the Title List or Chapter List
menu then press ENTER.
The menu options appears on the left side of the
screen.
3. Starts playback and use pause step, search and
slow-motion to find the starting point.
2. Select [Delete] option from the options on the
menu.
4. Press ENTER at the starting point of the section
you want to delete.
Example: Title List (HDD)
‘End Point’ icon is highlighted.
The part is indicated on the Progress Bar.
5. Use pause step, search and slow-motion to find
the ending point.
6. Press ENTER at the ending point of the section
you want to delete.
You can cancel the selected point, use v / V to
select [Cancel] icon then press ENTER.
Tip:
With HDD recordings, you can delete additional part.
Select [Next Part] icon on the menu then press
ENTER, then repeat steps 3-6.
3. Press ENTER to confirm.
The confirm message for deleting will appear.
4. Use b / B to select [Yes] then press ENTER.
The selected chapter or title is deleted.
After pressing ENTER, the new, updated menu is
displayed.
7. If you finish to edit, select [Done] icon then press
ENTER.
The confirm message for deleting will appear.
Use b / B to select [Yes] then press ENTER.
The selected part is deleted from the title and Title
List menu appears.
5. Repeat steps 1 - 4 to continue to delete from the
menu.
6. Press RETURN (O) repeatedly to exit the menu.
Notes:
Note:
ꢀ When DVD+RW recording, the deleted title’s name
is changed to ‘Deleted Title’.
It may not be possible to delete parts that are less
than 3 seconds long.
ꢀ If more than two titles are repeatedly deleted, the
titles are combined into one.
ꢀ When you are deleting a title or chapter, only the
last one on DVD+RW increases remaining recording
time.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
VR
Video
-RW
Naming a Title
Time Search HDD -RW
RAM +RW
-R
+R
You can name Original and Playlist titles independently.
Names can be up to 32 characters long.
You can select start point of the title.
1. Choose the title you want to name on the Title List
menu, then press ENTER.
1. Use b / B / v / V to choose a title on the Title List
menu then press ENTER.
The menu options appears on the left side of the
menu.
The options appears on the left side of the menu.
2. Select [Time] option then press ENTER.
[Search] menu appears on the TV screen.
Example: Title List (HDD)
2. Use v/V to select [Rename (Title Name)] option
then press ENTER.
Keyboard menu appears.
3. Enter a name for the title. Use b / B / v / V to
select a character then press ENTER to confirm
your selection.
ꢀ Use MENU/LIST button to change keyboard
type.
ꢀ OK: Select to finish.
ꢀ Cancel: Cancels all entered characters.
ꢀ Space: Inserts a space at the cursor position.
ꢀ Delete: Deletes the previous character at the
cursor position.
Current picture
End time
ꢀ b / B: Moves cursor to left or right.
Selected time
Selected point
Start time
Tip:
Remote control buttons for entering a name
PLAY (N): Inserts a space at the cursor position.
3. Use b / B to find the point you want to start.
The point increase 1 minute step.
If you press and hold b / B then the point increase
5 minute step.
X (PAUSE/STEP): Deletes the after character at
the cursor position.
x (STOP), CLEAR: Deletes the previous
character at the cursor position.
4. Press ENTER to start selected point.
. / >: Moves cursor to left or right.
Numbers (0-9): Enters the corresponding
character at the cursor position.
Tip:
You can add the genre only for HDD title name.
4. Choose OK then press ENTER to fix the name
and return to the previous menu screen.
5. Press RETURN (O) repeatedly to exit the menu.
Notes:
ꢀ Names can be up to 32 characters long.
ꢀ For discs formatted on a different recorder, you will
see only a limited character set.
ꢀ When recording on DVD-R, DVD+R or DVD+RW
discs, the entered name is displayed on the DVD
player only after finalization.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
HDD
Combining Two Titles Into One
Sort
HDD
This function allows you to access show listings
organized by Date, Title, or Category on the Title List-
HDD menu. So you can find title you want to watch
easily.
Use this function to combine two adjacent Original-
HDD titles into one.
Notes:
1. Choose any title on the Title List-HDD menu, then
ꢀ This function is not available if there is only one
titles within the HDD.
ꢀ If there are more than 60 titles on the HDD, you
cannot combine the titles.
press ENTER.
The menu options appears on the left side of the
menu.
2. Use v/V to select [Sort] option then press ENTER.
Sort options appears.
1. On the Title List-HDD menu, select the first title of
the two titles you want to combine then press
ENTER.
The menu options appears on the left side of the
screen.
2. Select [Combine] option then press ENTER.
3. Use v/V to select [Date], [Title] or [Category]
option then press ENTER.
After pressing ENTER, the sorted menu is
displayed.
Undoing/Redoing the Last
Deletion
3. Select the second title of the two titles you want to
combine then press ENTER.
VR
-RW
RAM
Confirm message appears.
If you make a mistake while deleting, you can undo it.
There is one level of undo (in other words, you can
undo the last one deletion you made).
4. Use b / B to select [Yes] then press ENTER.
After pressing ENTER, the updated menu is
displayed.
Use v / V to select [Undo] option then press ENTER.
It doesn’t matter whether you are currently in the
menu screen; the last deletion is undone.
Notes:
ꢀYou can’t undo a recording.
ꢀYou can’t undo anything after ejecting the disc from the
recorder or switching the recorder into standby mode.
ꢀYou can still undo a deletion even after exiting the
menu display.
Tip:
You can redo the last undo action using the [Redo]
option.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Divide One Titles Into Two
HDD +RW
Combining Two Chapters Into
One
VR
HDD -RW
+RW
+R
RAM
Use this function to combine two adjacent Playlist or
Original chapters into one.
Use this command to split a title up into two new titles.
1. On the Title List menu, select a title you want to
divide then press ENTER.
Note:
This function is not available if there is only one
chapter within the title.
The menu options appears on the left side of the
screen.
2. Select [Divide] option.
Example: Title List (HDD)
1. On the Chapter List menu, select the second
chapter of the two chapters you want to combine
then press ENTER
The menu options appears on the left side of the
screen.
2. Use v / V to select [Combine] option.
The combine indicator appears between the two
chapters you want to combine.
3. Press ENTER.
Edit (Divide) menu appears. [Divide] option is
highlighted.
Current picture
3. Press ENTER.
The first title’s
thumbnail
The second title’s
thumbnail
4. Use play, pause step, search and slow-motion to
find the point you want to divide the title.
5. Select [Divide] option then press ENTER at the
point.
To reset the point, select [Cancel] option then
press ENTER. Repeat from step 3.
6. Choose [Done] option then press ENTER to fix the
dividing point.
The title is divided into two new titles. It take up to
4 minutes to divide.
Note:
You cannot select dividing point less than 3 seconds.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Tip
Moving a Playlist Chapter
If you select a hidden chapter or title on the Title List
or Chapter List menu, you can ‘show’ it by choosing
[Show] option on the menu. After doing that, you are
able to see the chapter or title.
VR
-RW
RAM
Use this function to re-arrange the playing order of
Playlist chapters on the Title List-Playlist menu.
Note:
Protect a Title
This function is not available if there is only one
chapter.
VR
-RW
+RW
+R
RAM
Use this function to protect against accidental
recording, editing or deleting of the title.
1. Select a chapter on the Chapter List-Playlist menu.
2. Press ENTER.
1. Press MENU/LIST to display the Title List menu.
The menu options appears on the left side of the
menu.
2. Use v V b B to choose a title you want to protect
then press ENTER.
3. Use v / V to select [Move] option from Playlist
Options appear on the left side of the screen.
options then press ENTER.
3. Select [Protect] from the options.
4. Use b / B / v / V to choose the place you want to
move the chapter to then press ENTER.
After pressing ENTER, the updated menu is
displayed.
4. Press ENTER to confirm.
The lock mark will appears on the title’s thumbnail.
Tip
If you select a title that has already been protected on
the Title List menu, you can ‘unprotect’ it by choosing
[Protect] option from the Title List menu options. After
doing that, you can edit and delete the title.
+RW
+R
Hide a Chapter/Title
You can skip playing chapters or titles without deleting
from the disc.
1. Use v V b B to choose a chapter or title you want
to hide on the Title List or Chapter List menu, then
press ENTER.
Options appear on the left side of the screen.
2. Select [Hide] option.
Example: Title List (DVD+RW)
3. Press ENTER to confirm.
The chapter’s or title’s thumbnail will dim.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
authorized by Macrovision corporation. Reverse
engineering or disassembly is prohibited.
Dubbing
Before Dubbing
Use the copying features of this recorder to:
ꢀ Back up important recordings stored on the HDD to
a DVD.
ꢀ Make a DVD copy of a recording on the HDD to
play in another player.
ꢀ Transfer video from a DVD to the HDD for editing.
ꢀ Transfer edited video from the HDD to DVD.
The simplest method of copying is to use the One
Touch Copy feature. Using this you can very simply
copy the title that’s currently playing from HDD to
DVD, or the other way around.
ꢀ CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 625 PROGRESSIVE SCAN
PICTURE PROBLEMS, IT IS RECOMMENDED
THAT THE USER SWITCH THE CONNECTION TO
THE ‘STANDARD DEFINITION’ OUTPUT. IF
THERE ARE QUESTIONS REGARDING OUR TV
SET COMPATIBILITY WITH THIS MODEL 625p
HDD/DVD RECORDER, PLEASE CONTACT OUR
CUSTOMER SERVICE CENTER.
Fast copying (Maximum 12x)
Note:
Copying between DVD and HDD is a completely
digital process and therefore involves no loss of
quality in the audio or video. This means that you can
transfer back and forth without having to worry about
the quality getting worse with each copy ‘generation’.
It also means that copying can be carried out at the
maximum speed possible.
When copying from HDD to DVD, the speed of
copying depends on the recording mode and the kind
of DVD disc you’re using.
If the title’s length is less than 5 seconds, the dubbing
is not available. (from HDD to DVD)
Restrictions on copying
Some video material is copy-once protected: Such
material cannot be copied to HDD or DVD.
You can identify copy-once protected material during
playback by displaying disc information on-screen.
ꢀ NTSC format signals from the analog or the DV
inputs is not recorded correctly with this recorder.
ꢀ Video signals in SECAM format (from the built-in TV
tuner or from the analog inputs) are recorded in PAL
format.
Minimum fast copying times
The table below shows the minimum HDD to DVD
copying time for 2 hours of video recorded with SP
mode.
Disc
Type
Disc
Speed
Copying Time
(Record Speed)
What is ‘CPRM’?
DVD-R / DVD+R
DVD-R / DVD+R / DVD+RW
DVD+R DL
16x
8x
8x
6x
5x
4x
6.5 min. (12x)
8 min. (8x)
CPRM is a copy protection system (with scramble
system) only allowing the recording of ‘copy once’
broadcast programs. CPRM stands for Content
Protection for Recordable Media.
CPRM recordings can only be made on DVD-RW
discs formatted in VR mode or DVD-RAM discs, and
CPRM recordings can only be played on players that
are specifically compatible with CPRM.
13 min. (4x)
12 min. (6x)
11.5 min. (5x)
13 min. (4x)
DVD-RW
DVD-RAM
DVD-R / DVD+R
DVD-RW / DVD+RW
DVD-RAM
3x
2.4x
2x
17 min (3x)
21 min. (2.4x)
25 min. (2x)
DVD+R / DVD+RW / DVD+R DL
DVD-R / DVD-RW / DVD-RAM
Copyright
ꢀ Recording equipment should be used only for lawful
copying and you are advised to check carefully what
is lawful copying in the area in which you are
making a copy. Copying of copyright material such
as films or music is unlawful unless permitted by a
legal exception or consented to by the rights owner.
Notes:
ꢀ All times in the above table are approximate.
ꢀ Actual copy speed varies with the part of the disc
being recorded.
ꢀ There may be cases where even 4x/6x/8x/16x
compatible discs do not copy at full speed.
ꢀ Fast copying may not be possible when using disc
initialized on another recorder.
ꢀ This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other
limited viewing uses only, unless otherwise
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Dubbing from HDD to DVD
Dubbing from DVD to HDD
1. On the Title List-HDD menu, select a title you want
to dub then press ENTER.
1. On the Title List menu, select a title you want to
dub then press ENTER.
The menu options appears on the left side of the
screen.
Menu options appears on the left side of the
screen.
2. Use v / V to select [Dubbing] option then press
ENTER.
2. Use v / V to select [Dubbing] option then press
ENTER.
Dubbing menu appears.
Dubbing menu appears.
3. Use b / B to select record mode (XP, SP, LP, EP,
or Fast), then press V.
3. Use b / B to select record mode (XP, SP, LP, EP,
or Fast), then press V.
‘Start’ icon is highlighted.
‘Start’ icon is highlighted.
Fast: See page 51 for more information on Fast
copying.
Fast: Only available when copying VR mode disc
to HDD. (See page 51 for more information on
Fast copying.)
4. When [Start] icon is highlighted, press ENTER.
Dubbing starts.
4. When [Start] icon is highlighted, press ENTER.
Dubbing starts.
5. To stop dubbing at any other time, press
5. To stop dubbing at any other time, press
STOP (x).
STOP (x).
Notes:
Notes:
ꢀ The recording time of [Fast] mode could be varied
depending on data size of source.
ꢀ Depending on the conditions of the recording
equipment or the disc itself, the dubbing may not be
capable.
ꢀ Stopping dubbing in [Fast] mode partway through
will cancel the recording and any data recorded up
to that point will be lost.
ꢀ Stopping dubbing in [Fast] mode partway through
will cancel the recording and any data recorded up
to that point will be lost.
ꢀ If the remaining space on the disc is insufficient, the
[Fast] mode is not available.
ꢀ The recording time of [Fast] mode can take up to 19
minutes.
ꢀ The [Fast] mode is not available for edited HDD title
and Clip Recording title.
ꢀ The [Fast] mode is not available for edited title on
the DVD-RW with VR recording mode.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
One Touch Copy (HDD to DVD)
The One Touch Copy feature copies the currently
playing title from the HDD to DVD. The whole title is
copied, regardless of where in the title you start
copying. The recorder copies at the maximum speed
possible.
For One Touch Copy to work, make sure that a
recordable DVD disc is loaded.
During HDD playback, press DUBBING to copy the
current title to DVD.
The on-screen display indicates that the title is being
copied. Playback continues while copying.
ꢀ You cannot use the One Touch Copy function to
copy a title if any part of the title is copy-once
protected.
One Touch Copy (DVD to HDD)
One Touch Copy from DVD to HDD copies a single
title to the HDD in real time. When you start copying,
playback jumps back to the start of the title, then
continues through to the end of the title, when
recording automatically stops. The copy will be made
in the recording mode (XP, SP, LP, EP) that is
currently set.
During DVD playback, press DUBBING to copy the
current title to HDD.
Playback starts again from the beginning of the
current title. The on-screen display indicates that the
title is being copied.
Notes:
ꢀ Video CD cannot be copied to HDD.
ꢀ The copying stops when then recorder detects a
badly scratched or copy protected part.
ꢀ If some part of the title being copied is copy-
protected, copying will start, but the copy-protected
portions will not be copied.
ꢀ During Playlist title’s playback, One Touch Copy is
not available.
Tip:
To stop dubbing at any other time, press STOP (x).
53
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Press TITLE in play or stop mode.
Reference
Title List menu will appear as shown below.
Tip
Additional Information
Overwriting Recording +RW
You can remove the Title List menu by pressing
STOP (x).
To overwrite a new video recording on a previously
recorded title, follow these steps. This feature is not
available for DVD+Rs, that always record at the end
of the Disc.
1. Select input source you want to record (TV
channel, AV1-4, DV).
2. Press MENU/LIST to display the Title List menu.
3. To play back a title, select the title you want then
press ENTER or PLAY (N).
Playing Your Recordings on Other DVD
Players (Finalizing a Disc)
Most regular DVD players can play finalized discs
recorded in Video mode, finalized DVD+R or
DVD+RWs. A small number of players can also play
DVD-RW discs recorded in VR mode, finalized or not.
Check the manual that came with the other player to
check what formats of discs it will play.
3. Use v V b B to choose a title you want to
overwrite.
4. Press REC (z) to start overwrite recording.
Overwrite recording starts from the start point of
the title.
Finalizing ‘fixes’ the recordings and editings in place
so that the disc can be played on a regular DVD
player or computer equipped with a suitable DVD-
ROM drive.
Finalizing a Video mode disc creates a menu screen
for navigating the disc. The menu can be accessed by
pressing MENU/LIST or TITLE.
5. Press STOP (x) to stop the overwrite recording.
The new title is created and updated menu is
displayed.
Notes:
ꢀ This function is not available for a protected title.
ꢀ If the overwrite is longer than the recording
length of the current title, the next title is
overwritten. But if next title is protected, the
overwriting stops at the starting point of the
title.
To finalize a disc, refer to “Finalize” on page 22.
Notes:
ꢀ Unfinalized DVD+RW is playable on regular DVD
players.
ꢀ If the selected title’s recording length is less than 10
seconds, the next title is overwritten. But if the next
title is protected, overwriting stops.
ꢀ The edited contents of a DVD+RW disc is
compatible on regular DVD players only after
finalization.
ꢀ Any edited contents of the DVD+R disc are not
compatible on regular DVD players. (Hide, chapter
combine, added chapter mark, etc.)
ꢀ How long finalization takes depends on the type of
disc, how much is recorded on the disc, and the
number of titles on the disc.
Viewing Title List menu displayed on
other DVD Recorders or Players
+RW
+R
You can view the Title List menu displayed on the
other DVD player that is capable of playing DVD+RW
or DVD+R discs.
ꢀ DVD+R DL disc can take up to 30 minutes to
finalize.
1. Insert DVD+R or DVD+RW disc recorded already.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Codes
Use this list to input your desired language for the following initial settings:
Disc Audio, Disc Subtitle, Disc Menu.
Language
Abkhazian
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali; Bangla
Bhutani
Bihari
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Code
6566
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
7577
6765
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
Language
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Code
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Code
7678
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
8185
Language
Singhalese
Slovak
Slovenian
Somali
Spanish
Sudanese
Swahili
Swedish
Tagalog
Tajik
Code
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Oriya
Panjabi
Pashto, Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance 8277
Rumanian
Russian
Samoan
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Shona
Tamil
Tatar
Hebrew
Hindi
Telugu
Thai
Tibetan
Tigrinya
Tonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
8279
8285
8377
8365
7168
8382
8372
8378
8368
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Danish
Dutch
English
Esperanto
Estonian
Faroese
Korean
Kurdish
Laothian
Latin
Latvian, Lettish
Sindhi
Area Codes
Choose an area code from this list.
Area
Code
AF
AR
AU
AT
Area
Ethiopia
Fiji
Finland
France
Germany
Great Britain
Greece
Greenland
Heard and McDonald Islands HM
Hungary
India
Indonesia
Israel
Italy
Code
ET
FJ
Area
Code
MY
MV
MX
MC
MN
MA
NP
Area
Saudi Arabia
Senegal
Singapore
Slovak Republic
Slovenia
South Africa
South Korea
Spain
Sri Lanka
Sweden
Switzerland
Thailand
Turkey
Uganda
Code
SA
SN
SG
SK
SI
Afghanistan
Argentina
Australia
Austria
Belgium
Bhutan
Bolivia
Brazil
Cambodia
Canada
Chile
China
Colombia
Congo
Costa Rica
Croatia
Czech Republic
Denmark
Ecuador
Egypt
Malaysia
Maldives
Mexico
Monaco
Mongolia
Morocco
Nepal
Netherlands
Netherlands Antilles AN
New Zealand
Nigeria
Norway
FI
FR
DE
GB
GR
GL
BE
BT
ZA
BO
BR
KH
CA
CL
CN
CO
CG
CR
HR
CZ
DK
EC
EG
SV
KR
ES
LK
NL
HU
IN
ID
IL
IT
JM
JP
KE
KW
LY
LU
NZ
NG
NO
OM
PK
PA
PY
PH
PL
SE
CH
TH
TR
UG
UA
US
UY
UZ
VN
ZW
Oman
Pakistan
Panama
Paraguay
Philippines
Poland
Portugal
Romania
Russian Federation RU
Jamaica
Japan
Kenya
Kuwait
Libya
Luxembourg
Ukraine
United States
Uruguay
Uzbekistan
Vietnam
Zimbabwe
PT
RO
El Salvador
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling other TVs with the remote
Controlling Your TV with the
Supplied Remote Control
You can control the sound level, input source, and
power switch of non-LG TVs as well. If your TV is
listed in the table below, set the appropriate
manufacturer code.
You can control the sound level, input source, and
power switch of your LG TV with the supplied remote.
You can control your TV using the buttons below.
1. While holding down TV POWER button, press the
number buttons to select the manufacturer code
for your TV (see the table below).
2. Release TV POWER button.
Code numbers of controllable TVs
If more than one code number is listed, try entering
them one at a time until you find the one that works
with your TV.
TV Control
Buttons
Manufacturer
LG / GoldStar
Zenith
Code Number
1 (Default), 2
1, 3, 4
6, 7
8, 9
4
Samsung
Sony
Hitachi
Notes:
ꢀ Depending on your TV, some or all buttons may not
function on the TV, even after entering the correct
manufacturer code.
ꢀ If you enter a new code number, the code number
previously entered will be erased.
By pressing
POWER
You can
Turn the TV on or off.
ꢀ When you replace the batteries of the remote, the
code number you have set may be reset to the
default setting. Set the appropriate code number
again.
AV/INPUT
Switch the TV’s input source
between the TV and other input
sources.
PR/CH +/–
Scans up or down through
memorized channels.
VOL +/–
MUTE
Adjust the volume of the TV.
Temporarily turns TV sound OFF,
press again to restore.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Check the following guide for the possible cause of a problem before contacting service.
Cause
Solution
Symptom
No power.
ꢀ The power cord is disconnected.
ꢀ Plug the power cord into the wall
outlet securely.
No picture.
ꢀ TV/DVD mode for the recorder is set
to TV.
ꢀ Press TV/DVD on the remote control
repeatedly to choose DVD mode. TV
indicator disappears in the display
window.
ꢀ The TV is not set to receive recorder
signal output.
ꢀ
Select the appropriate video input mode
on the TV so the picture from the
recorder appears on the TV screen.
ꢀ The video cable is not connected
ꢀ Connect the video cable securely.
securely.
ꢀ The connected TV power is turned off. ꢀ Turn on the TV.
ꢀ The equipment connected with the
audio cable is not set to receive
recorder signal output.
ꢀ Select the correct input mode on the
audio receiver so you can listen to the
sound from the recorder.
No sound.
ꢀ The audio cables are not connected
ꢀ Connect the audio cable securely.
securely.
ꢀ
The power of the equipment connected
with the audio cable is turned off.
ꢀ Turn on the equipment connected
with the audio cable.
ꢀ
The audio connecting cord is damaged.
ꢀ Replace it with new one.
ꢀ The disc is dirty.
ꢀ Clean the disc.
The playback picture is
poor.
ꢀ No disc is inserted.
ꢀ Insert a disc. (Check that the disc
indicator in the display window is lit.)
The recorder does not
start playback.
ꢀ An unplayable disc is inserted.
ꢀ The disc is placed upside down.
ꢀ
Insert a playable disc. (Check the disc
type, color system, and regional code.)
ꢀ Place the disc with the playback side
down.
ꢀ Place the disc on the disc tray
correctly inside the guide.
ꢀ The disc is not placed within the
guide.
ꢀ Clean the disc.
ꢀ The disc is dirty.
ꢀ Cancel the Rating function or change
the rating level.
ꢀ The Rating level is set.
ꢀ You cannot connect via this recorder.
Connect the component directly to
your TV.
ꢀ The video signal from the external
component is copy-protected.
The picture from the
external input is
distorted
ꢀ Restore channels. See “Program Edit”
on page 17.
ꢀ Those channels are not stored in the
recorder.
Some channels are
skipped over when
using PR/CH (+/-).
ꢀ Tighten connections or replace cable.
ꢀ Aerial or cables are loose.
The picture or sound of
broadcasting channel is
weak or missing.
ꢀ Turn camcorder on and operate
properly.
ꢀ Camcorder is off.
Camcorder image is not
shown.
ꢀ Use AV/INPUT to select input channel
(AV1, AV2, DV, etc.)
ꢀ The recorder’s source is incorrect.
Camcorder image via
A/V input or DV IN to
recorder is not shown
on TV screen.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Cause
Solution
ꢀ Finalize the disc. (page 22)
ꢀ No solution.
Symptom
ꢀ
The disc was recorded in Video mode.
Cannot play a disc
recorded using this
recorder on another
player.
ꢀ Some players will not play even a
finalized disc recorded in Video mode.
ꢀ The disc was recorded in VR mode,
ꢀ The other player must be RW
compatible in order to play it.
ꢀ
Discs recorded with copy-once material
cannot be played on other players.
ꢀ No solution.
ꢀ The remaining blank space on the
disc is insufficient.
ꢀ Use another disc.
Cannot record or did
not record successfully.
ꢀ The source you are trying to record is
ꢀ You cannot record the source.
copy protected.
ꢀ
When setting the recording channel, the
channel is tuned on the TV’s own tuner.
ꢀ Select the channel on the recorder’s
built-in TV tuner.
ꢀ When recording to a Video mode disc,
programs that are copy-once
ꢀ Use a VR mode formatted disc for
copy-once material.
protected cannot be recorded.
Timer recording is not
possible.
ꢀ Clock in recorder is not set to correct
time.
ꢀ Set clock to correct time. See “Auto
Clock Set” or “Manual Clock Set” on
page 18.
ꢀ Timer has been programmed
incorrectly.
ꢀ Reprogram Timer. See “Timer
Recording” on page 38.
ꢀ Timer record indicator light does not
ꢀ Reprogram Timer.
appear after programming timer.
Stereo Audio Record
and/or Playback is not
present.
ꢀ TV is not Stereo-compatible.
ꢀ No solution.
ꢀ Broadcast program is not in stereo
format.
ꢀ No solution.
ꢀ The recorder A/V Out jacks are not
connected to TV A/V In jacks.
ꢀ Make A/V connections. Stereo is
available only via A/V output from the
recorder.
ꢀ The recorder Audio/Video Out is not
selected for viewing at the TV.
ꢀ Select AUX or A/V source as TV
input.
ꢀ The recorder’s TV audio channel is
set to mono.
ꢀ Set TV audio channel mode to Stereo.
See “Changing TV audio channel” on
page 37.
ꢀ The remote control is not pointed at
the remote sensor of the recorder.
ꢀ Point the remote control at the remote
sensor of the recorder.
The remote control
does not work properly.
ꢀ The remote control is too far from the
recorder.
ꢀ Operate the remote control within
7 m.
ꢀ There is an obstacle in the path of the
ꢀ Remove the obstacle.
remote control and the recorder.
ꢀ The batteries in the remote control
ꢀ Replace the batteries with new ones.
are exhausted.
...you can reset the recorder as follows:
Resetting the recorder
ꢀ
Press and hold the POWER button for at least five
seconds. This will force the unit to power off then
turn the unit back on.
If you observe any of the following symptoms...
ꢀ
The unit is plugged in, but the power will not turn
on or off.
ꢀ
Unplug the power cord, wait at least five seconds,
and then plug it in again.
ꢀ
The front panel display is not working.
The recorder is not operating normally.
ꢀ
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
General
Power requirements
AC 200-240V, 50/60 Hz
Power consumption
Dimensions (approx.)
Mass (approx.)
35W
430 X 54 X 275 mm (w x h x d) without foot
4.1 kg
Operating temperature
Operating humidity
Television system
Recording format
5˚C to 35˚C
5 % to 90 %
PAL I, B/G, I/I, SECAM D/K, K1 color system
PAL
Recording
Recording format
Recordable media
DVD Video Recording, DVD-VIDEO
HDD (RH188/RH188H: 160GB, RH199/RH199H: 250GB),
DVD-ReWritable, DVD-Recordable, DVD+ReWritable,
DVD+Recordable, DVD+Recordable (Double Layer), DVD-RAM
DVD (4.7GB): Approx. 1 hour (XP mode), 2 hours (SP mode),
4 hours (LP mode), 6 hours (EP mode)
Recordable time
DVD+R DL (8.5GB): Approx. 3 hour (XP mode),
3 hours 40 minutes (SP mode), 7 hours 10 minutes (LP mode),
10 hours 30 minutes (EP mode)
HDD (160GB/250GB): Approx. 42 hours/66 hours 30 minutes (XP mode),
82/129 hours (SP mode), 152/239 hours (LP mode),
226/356 hours (EP mode)
Video recording format
Sampling frequency
Compression format
Audio recording format
Sampling frequency
Compression format
27MHz
MPEG 2 (VBR support)
48kHz
Dolby Digital
Playback
Frequency response
DVD (PCM 48 kHz): 8 Hz to 22 kHz, CD: 8 Hz to 20 kHz
DVD (PCM 96 kHz): 8 Hz to 44 kHz
Signal-to-noise ratio
Harmonic distortion
Dynamic range
More than 100 dB (AUDIO OUT connector)
Less than 0.008% (AUDIO OUT connector)
More than 95 dB (AUDIO OUT connector)
Inputs
AERIAL IN
VIDEO IN
Aerial input, 75 ohms
1.0 Vp-p 75 ohms, sync negative, RCA jack x 2 / SCART x 2
2.0 Vrms more than 47 kohms, RCA jack (L, R) x 2 / SCART x 2
(Y) 1.0 V (p-p), 75 Ω, sync negative, Mini DIN 4-pin x 1
(C) 0.3 V (p-p) 75 Ω
AUDIO IN
S-VIDEO IN
DV IN
4 pin (IEEE 1394 standard)
Outputs
VIDEO OUT
1 Vp-p 75 Ω, sync negative, RCA jack x 1 / SCART x 2
(Y) 1.0 V (p-p), 75 Ω, sync negative, Mini DIN 4-pin x 1
(C) 0.3 V (p-p) 75 Ω
(Y) 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
19 pin (HDMI standard, Type A)
S-VIDEO OUT
COMPONENT VIDEO OUT
HDMI video/audio output
(RH188H/RH199H only)
Audio output (digital audio)
Audio output (optical audio)
Audio output (analog audio)
0.5 V (p-p), 75 Ω, RCA jack x 1
3 V (p-p), Optical connector x 1
2.0 Vrms (1 KHz, 0 dB), 600 Ω, RCA jack (L, R) x 1 / SCART x 2
Accessory:
Scart cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Audio cable (L, R) . . . . . . . . . . . . . . . . . . . . . . . .1
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . .1
Video cable . . . . . . . . . . . . . . . . . . . . .1
RF Coaxial Cable . . . . . . . . . . . . . . . .1
Batteries . . . . . . . . . . . . . . . . . . . . . . .2
ꢀ Design and specifications are subject to change without notice.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Technology with the human touch
GUARANTEE
● LG Electronics U.K. Ltd. will provide the following services in order to expedite this Guarantee.
1. All faulty components which fail due to defective manufacture will be replaced free of charge for a
period of 12 months from the original date of purchase.
2. The dealer (or his service agent) who sold the product will be reimbursed for any labour provided
in the repair of this LG equipment, for a period of 12 months from the original date of purchase.
These claims must be made in accordance with the published scale of service charges and
relevant claims procedure.
PLEASE NOTE:
A. The dealer may restrict the guarantee to the original purchaser.
B. The dealer is not obliged to carry out service under guarantee if unauthorized modifications are
made to the apparatus, or if non standard components are used or if the serial number of the
apparatus is removed, defaced, misused, or altered.
C. Any claims made under guarantee must be directed to the dealer from whom the equipment was
originally purchased. The dealer may, before carrying out service under guarantee, require a
receipted account as evidence of the date of purchase.
D. We respectfully point out that your dealer is not obligated to replace batteries if they become
exhausted or worn in use.
E. Aerial alignment and consumer control adjustments are not covered by this guarantee.
This guarantee does not affect your statutory rights.
● REQUIREMENTS TO MAINTAIN WARRANTY COVERAGE:
RETAIN YOUR RECEIPT TO PROVE DATE OF PURCHASE. A COPY OF YOUR RECEIPT MUST BE
SURRENDERED AT THE TIME GUARANTEE SERVICE IS PROVED.
● Product Registration Card :
It is helpful to complete at least your name, address, phone,
model & serial numbers and return it. This will enable LG to
assist you in the future should you lose your receipt, your
units be stolen, or should modifications be necessary.
● To obtain information or assistance: Call 0870 873 5454 Monday-Friday 9.00am-4.30pm
MODEL NO.*
SERIAL NO.*
DATE OF PURCHASE.*
Please complete for your own record
*
In all cases of difficulty - consult your LG dealer
from whom the product was purchased
P/NO : 3834RD0100D
Download from Www.Somanuals.com. All Manuals Search And Download.
|