OWNER’S MANUAL
MONITOR SIGNAGE
Please read this manual carefully before operating the
your set and retain it for future reference.
MONITOR SIGNAGE MODELS
65VS10
Download from Www.Somanuals.com. All Manuals Search And Download.
LICENSES
3
LICENSES
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks
or registered trademarks of HDMI Licensing LLC.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified® device that
plays DivX video. Visit divx.com for more information and software tools to
convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be
registered in order to play purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX VOD section in your device
setup menu. Go to vod.divx.com for more information on how to complete
your registration.
DivX Certified® to play DivX® video, including premium content.
DivX®, DivX Certified® and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668;
7,515,710; 7,519,274
Download from Www.Somanuals.com. All Manuals Search And Download.
4
ASSEMBLING AND PREPARING
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and accessories.
POWER
MONITOR
ON
OFF
ENERGY INPUT
SAVING
ꢀ
ꢃ
.
,
!
ꢁ
ABC
JKL
TUV
ꢂ
ꢅ
ꢈ
DEF
GHI
ꢄ
ꢇ
ꢉ
MNO
WXYZ
ꢆ
PQRS
1/a/A
CLEAR
-
*
#
MARK
ARC
P
A
G
E
BRIGHT
NESS
PSM
MUTE
AUTO
S.MENU
MENU
OK
BACK
TILE
EXIT
ID
ON
OFF
Power Cord
Remote control and Batteries
CD (Owner's Manual) / Card
D-Sub Signal Cable
CAUTION
Do not use any pirated items to ensure the safety and product life span.
Any damages or injuries by using pirated items are not covered by the warranty.
y
y
NOTE
The accessories supplied with your product may vary depending on the model.
Product specifications or contents in this manual may be changed without prior notice due to upgrade
of product functions.
y
y
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING AND PREPARING
5
Optional Accessories
Without prior notice, optional accessories are subject to change to improve the performance of the product,
and new accessories may be added. The illustrations in this manual may differ from the actual product and
accessories.
Cable holder/
Cable Tie
Screws/Cable
Speaker
Speaker kit
NOTE
Cable holder/Cable tie may not be available in some areas or for some models.
Optional accessories are not included for all models.
y
y
Download from Www.Somanuals.com. All Manuals Search And Download.
6
ASSEMBLING AND PREPARING
Parts and buttons
Power Indicator
Lighting On: Turned on
Lighting Off: Turned off
y
y
Screen Buttons
Screen Marks
RS-232C
HDMI / DVI
RGB IN
AUDIO
(RGB/DVI)
COMPONENT IN
AV IN / OUT
IN
USB
LAN
(CONTROL)
OUT
VIDEO
AUDIO
VIDEO
AUDIO
RGB OUT
IN
OUT
Description
Screen Marks
INPUT
MENU
▼▲
Changes the input source.
Accesses the main menus, or saves your input and exits the menus.
Adjust the up and down.
◄ ►
Adjusts the volume level.
AUTO/SET
Auto setup when using RGB input. It is also the Set or enter button to make changes in
the on-screen menus.
Turns the power on or off.
/ I
IR Receiver
Power Indicator
This is where the unit receives signals from the remote control.
This Indicator lights up green when the display operates normally(on mode). If the
display is in sleep (Energy Saving) mode, this indicator color changes to amber.
NOTE
You can set the Power indicator to on or off by selecting OPTION in the main menu.
y
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING AND PREPARING
7
Connecting the Speakers
Portrait Layout
- Only on some models.
- Only on some models.
Mount the speaker by using a screw as shown
in the following. Then connect the speaker
cable.
1
When installing in a Portrait Layout, rotate the
monitor clockwise 90 degrees (when facing the
screen).
After installing your speakers, use holders and
cable ties to organize the speaker cables. (This
feature is not available in all model.)
2
Download from Www.Somanuals.com. All Manuals Search And Download.
8
ASSEMBLING AND PREPARING
Installing on a wall
CAUTION
Disconnect the power cord first, and then
move or install the Monitor set. Otherwise
electric shock may occur.
If you install the Monitor set on a ceiling or
slanted wall, it may fall and result in severe
injury. Use an authorized LG wall mount
and contact the local dealer or qualified
personnel.
y
y
Install the monitor at least 10 cm away from the
wall and leave about 10 cm of space at each side
of the monitor to ensure sufficient ventilation. De-
tailed installation instructions can be obtained from
your local retail store. Please refer to the manual
to install and set up a tilting wall mounting bracket.
Do not over tighten the screws as this may
cause damage to the Monitor set and void
your warranty.
Use the screws and wall mounts that
meet the VESA standard. Any damages
or injuries by misuse or using an improper
accessory are not covered by the warranty.
y
y
10 cm
10 cm
10 cm
10 cm
NOTE
10 cm
The wall mount kit includes an installation
manual and necessary parts.
y
The wall mount bracket is optional. You can
obtain additional accessories from your local
dealer.
The length of screws may differ depending
on the wall mount. Be sure to use the proper
length.
y
y
y
If you want to mount the monitor on the wall (op-
tional), attach the wall mounting bracket to the rear
of the monitor.
Make sure that the wall mounting bracket is se-
curely fixed to the monitor and to the wall.
Use the wall mount plate and screws that comply
with the VESA standard as specified below.
For more information, refer to the
instructions supplied with the wall mount.
785mm(31 inch) or greater
y
* Fastening screw: Diameter 6.0 mm x Pitch 1.0
mm x Length 10 mm
(32 inch is Diameter 4.0 mm x Pitch 0.7 mm x
Length 10 mm)
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
9
REMOTE CONTROL
The descriptions in this manual are based on the buttons of the remote control. Please read this manual
carefully and use the Monitor set correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the
label inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
CAUTION
Do not mix old and new batteries, as this
may damage the remote control.
Make sure to point the remote control to the
remote control sensor on the Monitor set.
y
y
POWER
MONITOR
ENERGY INPUT
SAVING
ON
OFF
1
4
.
,
!
2
ABC
JKL
TUV
3
6
9
DEF
GHI
5
8
0
MNO
WXYZ
7
PQRS
1/a/A
CLEAR
-
*
#
MARK
ARC
P
A
G
E
BRIGHT
NESS
PSM
MUTE
AUTO
MENU
S.MENU
OK
BACK
TILE
EXIT
ID
ON
OFF
/ I (POWER)
ENERGY SAVING
Turns the Monitor set on or off.
Adjusts the brightness of
the screen to reduce energy
consumption.
POWER
Monitor On / Off
Turn off the monitor and then
turn it back on.
INPUT
Selects the input mode.
MONITOR
ENERGY INPUT
SAVING
OFF
ON
ꢀ. , ! ꢁABC ꢂDEF
ꢃGHI ꢄJKL ꢅMNO
Number and Alphabet buttons
Enters numbers.
The alphabet selection is not
applicable.
1/a/A Button
This button selection is not
applicable.
ꢆ ꢇTUV ꢈWXYZ
PQRS
Clear
1/a/A
CLEAR
ꢉ- * #
ARC
Selects the Aspect Ratio
Mode.
This button selection is not
applicable.
MARK
ARC
P
A
G
E
BRIGHT
NESS
PSM
MUTE
Brightness Key
PSM
Selects the Picture Status
Mode.
Adjust the brightness by
pressing the Up and Down
buttons on the remote control.
In USB mode, the OSD menu
has the Page function to
move to the next file list.
AUTO
MENU
MUTE
Mutes all sounds.
Download from Www.Somanuals.com. All Manuals Search And Download.
10 USING THE MONITOR SET
POWER
MONITOR
ENERGY INPUT
SAVING
ON
OFF
1
4
.
,
!
2
ABC
JKL
TUV
3
6
9
DEF
GHI
5
8
0
MNO
WXYZ
7
PQRS
1/a/A
CLEAR
-
*
#
MARK
ARC
P
A
G
E
BRIGHT
NESS
PSM
MUTE
AUTO
MENU
S.MENU
OK
BACK
TILE
EXIT
ID
ON
OFF
MENU (See p.14)
Accesses the main menus
or saves your input and exit
menus.
AUTO
Automatically adjusts picture
position and minimizes image
instability.(RGB input only)
Navigation buttons
Scrolls through menus or
options.
NESS
E
UTE
AUTO
S.MENU
MENU
S.MENU
OK
Selects menus or options and
confirms your input.
(SuperSign Menu Key)
This button selection is not
applicable.
OK
BACK
Allows the user to move back
one step in an interactive
application, EPG or other user
interaction function.
EXIT
BACK
EXIT
TILE
Clears all on-screen displays
and returns to Monitor set
viewing from any menu.
ID
ON
OFF
TILE
Selects the TILE Mode.
ID ON/OFF
When the number of input ID
is equal to the number of ID
Mode, you can control the
monitor which you want in the
multi display condition.
USB Menu control buttons
Controls media playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE MONITOR SET 11
USING THE MONITOR SET
Using the input list
Connecting to a PC
Your Monitor set supports the Plug & Play* feature.
Selecting an input source
* Plug & Play: The function when a PC recognizes
a connected device that users connect to a PC
and turn on, without device configuration or user
intervention.
Press INPUT to access the input source list.
1
- The connected device displays on each input
source.
Press the Navigation buttons to scroll to one of
the input sources and press OK.
2
Input source
AV(CVBS)
RGB
Description
A VCR or other external devices
Computer input.
NOTE
Component Older devices that do not have
It is recommended to use the Monitor set
with an HDMI connection for the best image
quality.
y
HDMI.
HDMI/DVI
Preferred connection type.
Supports high resolution inputs.
If you turn the Monitor set on when cold, the
screen may flicker. This is normal.
Some red, green, or blue spots may appear
on the screen. This is normal.
y
y
CAUTION
Connect the signal
input cable and tighten
it by turning the screws
clockwise.
y
Do not press the screen with your finger for
a long time as this may result in temporary
distortion on the screen.
Avoid displaying a fixed image on the
screen for a long period of time to prevent
image burn. Use a screensaver if possible.
y
y
Download from Www.Somanuals.com. All Manuals Search And Download.
12 USING THE MONITOR SET
RGB connection
HDM/DVI connection
Transmits the analog video signal from your PC to
the Monitor set. Connect the PC and the Monitor
set with the D-sub 15 pin cable as shown the
following illustrations.
Transmits the digital video signal from your PC to
the Monitor set. Connect the PC and the Monitor
set with the HDMI/DVI cable as shown the
following illustrations.
Select RGB input source.
Select HDMI/DVI input source.
PC
PC
PC
PC/MAC
(not included)
(not included)
Macintosh Adapter
(not included)
Back of the product.
Back of the product.
NOTE
NOTE
Apple computers may
require an adapter
to connect to this
monitor. Call or visit
their web site for more
information.
y
When using computer input with HDMI, you
must set the label of that HDMI input to PC.
Use a shielded signal interface cable, such
as D-sub 15 pin signal cable and DVI to
HDMI cable, with a ferrite core to maintain
standard compliance for the product.
y
y
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE MONITOR SET 13
HDMI connection
Transmits the digital video and audio signals from
your PC to the Monitor set. Connect the PC and
the Monitor set with the HDMI cable as shown in
the following illustrations.
Select HDMI/DVI input source.
PC
(not included)
HDMI/DVI
Back of the product.
NOTE
Use a High Speed HDMI™ Cable.
y
y
Please check the PC environment if you
cannot hear the sound in HDMI mode. Some
PCs require you to manually change the
default audio output to HDMI.
If you want to use HDMI-PC mode, you must
set the input label to PC mode.
y
Download from Www.Somanuals.com. All Manuals Search And Download.
14 CUSTOMIZING SETTINGS
CUSTOMIZING SETTINGS
Accessing main menus
ARC
UTE
Press MENU to access the main menus.
1
2
AUTO
OK
MENU
S.MENU
Press the Navigation buttons to scroll to one of the following menus and
press OK.
BACK
ID
TILE
EXIT
ON
OFF
Press the Navigation buttons to scroll to the setting or option you want
and press OK.
3
4
When you are finished, press EXIT.
When you return to the previous menu, press BACK.
AUDIO (See p.20)
Adjusts the sound quality,
effect, or volume level.
PICTURE (See p.15)
Adjusts the image size,
quality, or effect.
TIME (See p.21)
Sets the time, date, or
Timer feature.
PICTURE
OPTION
AUDIO
TILE
TIME
USB
USB (See p.26)
Using integrated media
features.
OPTION (See p.22)
Customizes the general
settings.
TILE (See p.24)
Adjusts the tile options.
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMIZING SETTINGS 15
PICTURE settings
Move
OK
PICTURE
Aspect Ratio
: 16:9
Press MENU to access the main menus.
1
2
Energy Saving : Off
Picture Mode
: Standard
Press the Navigation buttons to scroll to PICTURE and
press OK.
• Backlight
• Contrast
70
90
• Brightness 50
Press the Navigation buttons to scroll to the setting or
option you want and press OK.
3
4
• Sharpness
• Color
70
60
0
- To return to the previous level, press BACK.
• Tint
• Advanced Control
• Picture Reset
When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
Screen
The available picture settings are described in the following:
Setting
Description
Aspect Ratio
Energy Saving Sets to automatically adjust the screen brightness corresponding to the surroundings.
Level
Off
100% light
80% light
60% light
40% light
Level 1
Level 2
Level 3
NOTE
If the 'Picture Mode' is set to 'Cinema', the 'Energy saving' mode is disabled.
y
Picture Mode
Selects one of the preset image or customizes options in each mode for the best Monitor set screen
performance. You are also able to customize advanced options of each mode.
The available preset picture modes vary depending on the Monitor set .
Mode
Vivid
Adjusts the video image for the retail environment by enhancing the contrast,
brightness, Color, and sharpness.
Standard
Cinema
Adjusts the image for the normal environment.
Optimizes the video image for a cinematic look to enjoy movies as if you are in a
movie theater.
Sport
Optimizes the video image for high and dynamic actions by emphasizing primary
Colors such as white, grass, or sky blue.
Game
Optimizes the video image for a fast gaming screen such as PCs or games.
Expert1/2
Adjusts the detailed video image settings for video experts as well as general
Download from Www.Somanuals.com. All Manuals Search And Download.
16 CUSTOMIZING SETTINGS
SCREEN
(In RGB
Mode Only)
Customizes the PC display options in RGB mode.
Option
Resolution
Selects a proper resolution. See “Customizing PC display options”.
Auto Configure Sets to adjust the screen position, clock, and phase automatically.
The displayed image may be unstable for a few seconds while the configuration is
in progress.
Position/Size/
Phase
Adjusts the options when the picture is not clear, especially when characters are
shaky, after the auto configuration.
Reset
Restores the options to the default setting.
Basic image options
Setting
Description
Backlight
Adjusts the brightness of the screen by controlling the LCD backlight. If you decrease the
brightness level, the screen becomes darker and the power consumption will be reduced
without any video signal loss.
Contrast
Increases or decreases the gradient of the video signal. You may use Contrast when the
bright part of the picture is saturated.
Brightness
Sharpness
Adjusts the base level of the signal in the picture. You may use Brightness when the dark
part of the picture is saturated.
Adjusts the level of crispness in the edges between the light and dark areas of the picture.
The lower the level, the softer the image.
Color
Adjusts intensity of all colors.
Tint
Adjusts the balance between red and green levels.
Color Temperature
Advanced Control
Reset
Set to warm to enhance hotter Colors such as red, or set to cool to make picture bluish.
Customizes the advanced options. Refer to the Advanced image options. (See p.17).
Restores the options to the default setting.
NOTE
If the 'Picture Mode' setting in the Picture menu is set to Vivid, Standard, Cinema, Sport or Game
the subsequent menus will be automatically set.
y
You cannot adjust color and tint in the RGB-PC / HDMI-PC mode.
When the Expert 1,2 is selected, you can select Backlight, Contrast, Brightness, H Sharpness, V
Sharpness, Color or Tint .
y
y
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMIZING SETTINGS 17
Advanced image options
Setting
Description
Colour
Temperature
Option
Cool
Sets the screen color to a bluish tone.
Sets the screen to the standard color.
Sets the screen color to a reddish tone.
Medium
Warm
Dynamic
Contrast
Adjusts the contrast to keep it at the best level according to the brightness of the screen. The
picture is improved by making bright parts brighter and dark parts darker. (This function can be used
only under AV(CVBS) and Component.)
Dynamic Color Adjusts screen Colors so that they look livelier, richer and clearer. This feature enhances
hue, saturation and luminance so that red, blue, green and white look more vivid. (This function can
be used only under AV(CVBS) and Component.)
Noise
Reduction
Reduces screen noise without compromising video quality. (This function can be used only under
AV(CVBS) and Component.)
Gamma
Set your own gamma value. On the monitor, high gamma values display whitish images and low
gamma values display high contrast images.
Black Level
» Low: The picture of the screen gets darker.
» High: The picture of the screen gets brighter.
Set black level of the screen to proper level.
(Function works in the following mode - AV(CVBS), Component, HDMI-DTV)
Film Mode
You can watch a cinema-like video by eliminating judder effect.
Use this function when you watch movies.
White Balance This is the function to adjust the overall Color of the image to the feeling you want.
(Function works in the following mode - Expert 1, Expert 2 Picture mode)
Color
Management
System
As the tool used by the experts to make adjustments by using the test patterns, this does not
affect other Colors but can be used to selectively adjust the 6 Color areas (Red/Green/Blue/
Cyan/ Magenta/Yellow). Color difference may not be distinctive even when you make the
adjustments for the general video.
Adjusts Red/Green/Blue/Yellow/Cyan/Magenta.
» Red/Green/Blue/Yellow/Cyan/Magenta Color: The adjustment range is -30 to +30.
» Red/Green/Blue/Yellow/Cyan/Magenta Tint: The adjustment range is -30 to +30.
(Function works in the following mode - Expert 1, Expert 2 Picture mode)
Download from Www.Somanuals.com. All Manuals Search And Download.
18 CUSTOMIZING SETTINGS
Aspect Ratio
- Original : The aspect ratio is not adjusted from
the original. It is set by the program being
watched.
Resize the image to view the image at its optimal
size by pressing ARC button.
CAUTION
Original
If a fixed image displays on the screen for a
long period of time, it will be imprinted and
become a permanent disfigurement on the
screen. This is “image burn” or “burn-in” and
not covered by the warranty.
If the aspect ratio is set to 4:3 for a long
period of time, image burn may occur on
the letterboxed area of the screen.
y
y
- 4:3 : The following selection will allow you to
view a picture with an original 4:3 aspect ratio,
gray bars will appear on both the left and right of
the screen.
- 16:9 : The following selection will allow you
to adjust the picture horizontally, in linear
proportion, to fill the entire screen(useful for
viewing 4:3 formatted DVDs).
- 1:1 : The aspect ratio is not adjusted from the
original. (Only HDMI/DVI PC, RGB PC)
- 14:9 : You can view a picture format of 14:9 or a
general Monitor set program in the 14:9 mode. The
14:9 screen is viewed in the same way as in 4:3,
but is magnified to the left and right.
- Just Scan : Following Selection will lead to you
view the picture of best quality without loss of
original picture in high resolution image. Note: If
there is noise in original Picture, You can see the
noise at the edge.
Just Scan
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMIZING SETTINGS 19
- Zoom : The following selection will allow you
to view the picture without any alteration, while
filling the entire screen. However, the top and
bottom of the picture will be cropped.
MODE AV Component HDMI/DVI RGB
DTV PC PC
ARC
16:9
o
x
o
o
x
o
o
o
o
o
x
o
x
o
o
o
o
o
x
o
x
o
o
o
o
x
x
o
o
x
x
x
o
x
x
o
o
x
x
x
Just Scan
Original
4:3
1:1
14:9
Zoom
CinemaZoom1
Full Wide
o
x
x
x
x
- Cinema Zoom 1 : Choose Cinema Zoom
when you want to enlarge the picture in correct
proportion. Note: When enlarging or reducing
the picture, the image may become distorted.
- Full Wide : When Monitor set receives the wide
screen signal,it will lead you to adjust the picture
horizontally or vertically, in a linear proportion,to
fill the entire screen fully.
Full Wide
Download from Www.Somanuals.com. All Manuals Search And Download.
20 CUSTOMIZING SETTINGS
AUDIO settings
OK
Move
AUDIO
Auto Volume
: Off
Press MENU to access the main menus.
1
2
Clear Voice II
: Off
• Level
3
Press the Navigation buttons to scroll to AUDIO and press
OK.
Balance
0
Sound Mode
: Standard
• Treble
• Bass
50
50
Press the Navigation buttons to scroll to the setting or
option you want and press OK.
3
4
• Reset
: On
- To return to the previous level, press BACK.
Speaker
When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available audio options are described in the following:
Setting
Description
Auto Volume
To adjust uneven sound volumes across all channels or signals automatically to the most
appropriate level. To use this feature, select On.
Clear Voice ll
Balance
By differentiating the human sound range from others,it helps users listen to human voices better.
Adjusts balance between the left and right speakers according to your room environment.
Selects one of the preset sound modes or customize each option in each mode.
Mode
Sound Mode
Standard
Music
Select when you want standard-quality sound.
Select when you listen to music.
Cinema
Sport
Select when you watch movies.
Select when you watch sports events.
Select when you watch sports events.
Game
Speaker
ON: Enables sound to the monitor speaker. (* The monitor speaker is sold separately.)
OFF: Disables sound to the monitor speaker. Use this option when using an external sound device.
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMIZING SETTINGS 21
TIME settings
OK
Move
TIME
Clock
: −− : −− −−−−
: Off
Press MENU to access the main menus.
1
2
Off Time
On Time
: Off
Press the Navigation buttons to scroll to TIME and press
OK.
Sleep Timer
Auto Off
: Off
: On
Power On Delay
: Off
Press the Navigation buttons to scroll to the setting or option
you want and press OK.
3
4
Automatic Standby : On(4hours)
- To return to the previous level, press BACK.
When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available time settings are described in the following:
Setting
Description
Clock
Sets the time feature.
On/Off Time
Sleep Timer
Sets the time to turn on or off the Monitor set.
Sets the length of time until the Monitor set to turns off. When you turn the Monitor set off and turn
it on again, the Sleep Timer will be set to off.
Auto off
If Auto off is active and there is no input signal, the set switches to off mode automatically after 10
minutes.
Power on delay
When connecting multiple monitors and turning the power on, the monitors are turned on individually
to prevent overload.
NOTE
Once the on or off time is set, these functions operate daily at the preset time.
y
y
y
The scheduled power-off function works properly only when the device time is set correctly.
When the scheduled power-on and power-off times are the same, the power-off time has priority over the power-on time
if the set is turned on, and vice versa if the set is turned off.
Download from Www.Somanuals.com. All Manuals Search And Download.
22 CUSTOMIZING SETTINGS
OPTION settings
OK
Move
OPTION
Language
: English
Press MENU to access the main menus.
1
2
Input Label
Key Lock
: Off
Press the Navigation buttons to scroll to OPTION and press
OK.
Set ID
: Off
ISM Method
DPM Select
Power Indicator
Interface Select
Network Setup
Information
Factory Reset
: Normal
: On
Press the Navigation buttons to scroll to the setting or option
you want and press OK.
: ON
3
4
: RS232C
- To return to the previous level, press BACK.
When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available option settings are described in the following:
Setting
Language
Description
To choose the language in which the control names are displayed.
Input Label
Selects a label for an input source to identify a device connected to each input source.
NOTE
If you want to use HDMI-PC mode, you must set the input label to PC mode.
y
Key Lock
Use the buttons to select On or Off. The monitor can be set up so that it can only be used with the
remote control. This feature can prevent unauthorized viewing.
In order to lock the OSD screen adjustment, set the Key Lock tab to the 'On' position.
In order to unlock it, do the following :
Push the MENU button on the remote control and set Key Lock to the 'Off' position.
Set ID
You can assign a unique Set ID NO (name assignment) to each product when several products
are connected for display. Specify the number (1 to 99) using the button and exit. Use the
assigned Set ID to individually control each product using the Product Control Program.
ISM Method
A frozen or still picture from a PC/Video game displayed on the screen for prolonged periods
could result in a ghost image remaining even when you change the image. Avoid allowing a fixed
image to remain on the screen for a long period of time.
Setting
Normal
Orbiter
Leave on normal if you don't foresee image burn in being a problem.
May help prevent ghost images. However, it is best not to allow any fixed
image to remain on the screen. To avoid a permanent image on the screen,
the screen will move every 2 minutes.
Inversion
This function inverts the panel color of the screen. The panel color is
automatically inverted every 30 minutes.
White wash
White wash fills the screen with solid white. This helps removes permanent
images burned into the screen. A permanent image may be impossible to clear
entirely with white wash.
DPM Select
A user can choose to turn the power saving mode on / off.
Power Indicator
Use this function to set the power indicator on the front side of the product to On or Off.
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMIZING SETTINGS 23
Setting
Description
Interface Select
Sets up network connections.
Option
RS-232C
Network
Option
Enables communication via Serial.
LAN - Enables communication via Ethernet.
Network Setup
DHCP
Allocates and sets up IP automatically.
Manual
Sets up IP address, Gateway, Subnet Mask, Primary DNS and Secondary
DNS.
The setup process is complete when you select Execute, and "IP Setup
Completed" is displayed at the bottom of the screen. While "Wait for IP Setup"
is displayed, you cannot use the local keys and remote control. "Wait for IP
Setup" is displayed for up to 40 seconds.
* If Network select is set to RS232C.DHCP and Manual are disabled.
Information
You can find informations about Serial No, F/W version, IP Address and MAC Address.
Select this option to return to the default factory settings.
Factory Reset
Download from Www.Somanuals.com. All Manuals Search And Download.
24 CUSTOMIZING SETTINGS
TILE settings
OK
Move
TILE
Tile Mode
: 2x2
Press MENU to access the main menus.
1
2
Tile ID
: 0
Natural Mode
H Size
: Off
: 0
Press the Navigation buttons to scroll to TILE and press
OK.
V Size
: 0
H Position
V Position
Reset
: 0
Press the Navigation buttons to scroll to the setting or
option you want and press OK.
: 0
3
4
- To return to the previous level, press BACK.
When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available lock settings are described in the following:
Setting
Description
Tile Mode
To use this function
- Must be displayed with various other products.
- Must be in a function that can be connected to RGB Cable by distributor and RS-232C.
Tile mode and choose Tile alignment and set the ID of the current product to set location.
* Only after pressing the SET button the adjustments made to the settings will be saved.
- Tile mode : column x row ( c = 1, 2, 3, 4, 5 r = 1, 2, 3, 4, 5)
- 5 x 5 available.
- Configuration of an integration screen is also available as well as configuration of One by one
Display.
Tile ID
Select the location of the Tile by setting an ID.
Natural
H-Size
The image is omitted by the distance between the screens to be naturally shown.
Adjust the horizontal size of the screen taking into account the size of the bezel.
Adjust the vertical size of the screen taking into account the size of the bezel.
Moving the screen position horizontally.
V-Size
H-Position
V-Position
Reset
Moving the screen position vertically.
Function to initialize and release Tile.
All Tile setting are released when selecting Tile recall and the screen returns to Full screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMIZING SETTINGS 25
Tile Mode
This monitor can be tiled with additional monitors to create a large tiled display.
• 3X3:
• 2X1:
• 2X2:
• Off:
When using 9 monitors
When using 2 monitors
When using 4 monitors
When the Tile Mode
option is disabled
ID 3
ID 6
ID 2
ID 1
ID 2
ID 5
ID 1
ID 3
ID 2
ID 4
ID 1
ID 4
Tile ID
ID 9
ID 8
ID 7
• 4X4:
• 5X5:
When using 25 monitors
When using 16 monitors
ID 3
ID 4
ID 5
ID 2
ID 1
ID 1
ID 5
ID 3
ID 7
ID 4
ID 8
ID 2
ID 6
ID 8
ID 9
ID 10
ID 15
ID 7
ID 6
ID 13
ID 18
ID 23
ID 14
ID 19
ID 24
ID 12
ID 11
ID 16
ID 21
ID 11
ID 15
ID 12
ID 16
ID 10
ID 14
ID 9
ID 20
ID 25
ID 17
ID 22
ID 13
Tile Mode - Natural mode
When active, the part of the image that would normally be displayed in the gap between the monitors is
omitted.
Before
After
Download from Www.Somanuals.com. All Manuals Search And Download.
26 ENTERTAINMENT
ENTERTAINMENT
Precautions when using the USB device
Using integrated media
features
Only a USB storage device is recognizable.
If the USB storage device is connected
through a USB hub, the device is not
recognizable.
y
y
Connecting USB storage devices
Connect USB storage devices such as a USB
flash memory, external hard drive, or MP3 player
to the Monitor set and use multimedia features
(“Browsing files” See p.27).
Connect a USB flash memory or USB memory
card reader to the Monitor set as shown on the
following illustration. The USB screen appears.
A USB storage device using an automatic
recognition program may not be recognized.
A USB storage device which uses its own
driver may not be recognized.
The recognition speed of a USB storage
device may depend on each device.
Please do not turn off the Set or unplug
the USB device when the connected USB
storage device is working. When such device
is suddenly separated or unplugged, the
stored files or the USB storage device may
be damaged.
y
y
y
y
or
Please do not connect the USB storage
device which was artificially maneuvered on
the PC. The device may cause the product to
malfunction or fail to be played. Never forget
to use only a USB storage device which has
normal music files or image files.
Please use only a USB storage device which
was formatted as a FAT16, FAT32, NTFS file
system provided with the Windows operating
system. In case of a storage device
formatted as a different utility program which
is not supported by Windows, it may not be
recognized. Data in a USB storage device
cannot be deleted in the NTFS file system.
Please connect power to a USB storage
device which requires an external power
supply. If not, the device may not be
recognized.
y
y
To disconnect a USB storage device,
make sure to end the connection properly to
prevent damages to the Monitor set or files.
y
y
Please connect a USB storage device with
cable is offered by USB maker. If connected
with cable is not offered by USB maker or an
excessively long cable, the device may not
be recognized.
CAUTION
Do not turn the Monitor set off or remove a
USB storage device while the USB storage
device is connected to the Monitor set, as
this could result in loss of files or damage to
the USB storage device.
Back up your files saved on a USB storage
device frequently, as you may lose or
damage the files and this may be not
covered by the warranty.
y
y
Some USB storage devices may not be
supported or operated smoothly.
Maximum of 999 files and folders can be
recognized.
Data in a USB storage device cannot be
aligned. Up to 128 English characters can be
y
y
y
Download from Www.Somanuals.com. All Manuals Search And Download.
ENTERTAINMENT 27
recognized as a file name.
Browsing files
Please back up the important file because a
data of USB device may be damaged. Data
management is consumer's responsibility
and in consequence the manufactures does
not cover the product bearing data damage.
If the USB is connected in Standby Mode,
specific hard disk will automatically be loaded
when the Set is turned on.
The recommended capacity is 1TB or less
for a USB external hard disk and 32GB or
less for USB memory.
Any device with more than the recommended
capacity may not work properly.
y
Access the Photo, Music or Movie lists and
browse files.
Connect a USB storage device.
1
2
3
y
y
Press MENU to access the main menus.
Press the Navigation buttons to scroll to USB
and press OK.
Press the Navigation buttons to scroll to
4
PHOTO LIST, MUSIC LIST or MOVIE LIST
y
y
and press OK.
If a USB external hard disk with a “Power
Saving” function does not work, turn the
hard disk off and on again to make it work
properly.
Names and subtitles of some language files
may not display properly.(Korean, Chinese,
Japanese)
When using Korean or Chinese subtitles
or file names, it is recommended to set the
language to the corresponding one.
y
y
PHOTO LIST
MUSIC LIST
MOVIE LIST
OK
Move
USB
Photo List
Music List
Movie List
DivX Reg.Code
Deactivation
Select Drive1 to access the connected USB
storage device
5
USB Device
Free Space 150 MB
Photo List
Page 1/1 No Marked
USB
Drive 1
Drive 1
0 folder(s), 0 file(s)
Up Folder
Exit
Navigation
Popup Menu
Page Change
Mark
Download from Www.Somanuals.com. All Manuals Search And Download.
28 ENTERTAINMENT
Supported file format
Select a folder you want.
6
- To return to the previous level, select
Type
Supported file format
Up Folder.
Photo
JPG
y
y
Available size
Baseline: 64 pixel (W) x 64 pixel (H) -
15360 pixel (W) x 8640 pixel (H)
Progressive: 64 pixel (W) x 64 pixel (H) -
1024 pixel (W) x 768 pixel (H)
USB Device
Free Space 150 MB
Photo List
Page 1/1 No Marked
USB
KY101
KY103
KY105
KY102
KY104
Drive 1
Music
Video
MP3
y
y
y
Bit rate range 32 Kbps to 320 Kbps
Sampling rate (Sampling Frequency)
MPEG1 layer 3: 32 kHz, 44.1 kHz,
48 kHz
0 folder(s), 0 file(s)
Up Folder
* A copy-protected file will not play.
Popup Menu
Page Change
Mark
Exit
Navigation
MPEG1, MPEG2, MPEG4(Doesn't
support Microsoft MPEG 4-V2, V3),
DivX 3.xx, DivX 4.xx, DivX 5.xx, DivX
VOD(DRM), XviD, DivX 6.xx(Playback)
Audio format: Mpeg, Mp3, PCM
Sampling frequency: within 32k to 48khz
Bit rate of audio format: within 32k to
320kbps
y
y
y
y
Press the Navigation buttons to browse files.
7
The highlighted file will display in the preview
window.
Supported subtitle format: *.smi, *.srt,
*.sub (MicroDVD, SubViewer 2.0), *.ass,
*.ssa, *.txt (DVD Subtitle System)
y
1
2
USB Device
Photo List
Page 2/3
No Marked
Free Space 150 MB
Drive 1
KY103
02/12/2010
02/12/2010
02/12/2010
02/12/2010
02/12/2010
02/12/2010
02/12/2010
Up Folder
JMJ001
3
KY101
02/12/2010
02/12/2010
02/12/2010
02/12/2010
02/12/2010
02/12/2010
KY104
KY102
KY105
JMJ001
JMJ002
JMJ003
JMJ004
JMJ005
JMJ006
JMJ007
JMJ008
4
5
6
7
1366x768, 125KB
Up Folder
EXIT
MARK
Exit
Option
Page Change
Mark
Navigation
No.
1
2
3
4
5
6
7
Description
Current page number/total number of pages
The number of selected files
File and Folder name
Preview window
File size, information.
Return to the previous level
Available buttons on the remote control
Download from Www.Somanuals.com. All Manuals Search And Download.
ENTERTAINMENT 29
Using photo options
Use the following options while viewing photos.
Viewing Photos
View image files saved in a USB storage device.
The displays on the screen may differ from the
model.
Press the Navigation buttons to scroll to USB
and press OK.
1
Press the Navigation buttons to scroll to Photo
List and press OK.
2
◄
◘
1/17
►
꘤
Slideshow
◘
BGM
Delete
Option
Hide
Press the Navigation buttons to select Drive1
3
4
to access the connected USB storage device.
Options
Number of selected photos
Press the Navigation buttons to scroll to a
folder you want and press OK.
Option
Description
Press the Navigation buttons to scroll to a file
you want and press OK.
5
Slideshow
Starts or stops a slideshow with selected
photos.
If there are no selected photos, all
photos saved in the current folder
display during a slideshow.
A pop-up window will appears.
To set a slideshow speed, select Option.
USB Device
BGM
Turns the background music on or off.
To set the background music folder,
select Option.
Photo List
Page 2/3
No Marked
Free Space 150 MB
02/12/2010
02/12/2010
02/12/2010
02/12/2010
02/12/2010
02/12/2010
02/12/2010
Drive 1
KY103
KY104
Up Folder
JMJ001
KY101
02/12/2010
02/12/20
02/12/20
1366x768, 125KB
Rotates photos clockwise (90°, 180°,
270°, 360°).
KY102
(Rotate)
View
Mark All
JMJ001
JMJ002
JMJ003
JMJ004
JMJ008
02/12/20
Delete
02/12/20
Close
1366x768, 125KB
Up Folder
NOTE
02/12/2010
The supported photo size is limited.
You cannot rotate a photo if the
resolution of the rotated width is
larger than the supported resolution
size.
EXIT
MARK
Option
Page Change
Mark
Exit
Navigation
View photos by using the following menus.
6
Delete
Option
Deletes a photo.
Slide Speed: Selects a slideshow
speed (Fast, Medium, Slow).
Music Album: Selects a music folder
for the background music.
y
Menu
View
Description
Displays the selected photo in a full-
screen view.
Drive: Views photos saved in a
y
y
USB storage drive.
NOTE
Mark All
or Unmark selections
All
Selects all files or clears all of your
You cannot change the music folder
while the background music is
playing.
Delete
Deletes a file saved in a USB storage
device.
Hide
Hides the option window.
To display the options, press
.
OK
NOTE
You cannot delete the files saved
in a shared folder of a PC.
Close
Closes the pop-up menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
30 ENTERTAINMENT
Control playback by using the following
buttons.
7
Listening to Music
Press the Navigation buttons to scroll to USB
and press OK.
1
Button
Description
Stops playback
Press the Navigation buttons to scroll to Music
List and press OK.
2
Plays a music file
Pauses or resumes playback
Skips to the next file
Select Drive1 to access the connected USB
storage device.
3
4
Skips to the previous file
Press the Navigation buttons to scroll to a
folder you want and press OK.
Press the Navigation buttons to scroll to a file
you want and press OK.
5
NOTE
A pop-up window will appears.
A damaged or corrupted file will not play and
the duration of the file display as 00:00.
A copy-protected file will not play.
If the Monitor set is not in use for some time
during playback, the information box as a
screensaver will appear to prevent image
burn.
y
USB Device
Music List
Page 2/3
No Marked
Free Space 150 MB
Duration
y
y
Music
S003
Title
Up Folder
S001
Up Folder
03:33
4395KB 1Kbps
Play
S002
S003
S004
S005
04:45
Play with Photo
Mark All
Delete
01:30
00:00/01:34
Up Folder
02:37
Close
01:58
Navigation
Option
MARK
EXIT Exit
y To return to the Music list screen, press OK,
Page Change
Mark
■ (stop) or BACK.
Play music by using the following menus.
6
Menu
Description
Folder name/file name
Play, Stop Plays music, stops playback, or plays
Play, or
Play
Marked
the selected music file. If you play
music without selecting music files, all
of the music files saved in the current
folder will play.
Music
S003
The icon will appear in front of the
duration on the currently playing file.
0:27 / 3:67
Q.MENU
Option
Drive: Listen to music files saved in
y
a USB storage drive.
Time elapsed /Duration
Play with Displays photos during playback.
Photo
Mark All
Selects all files or clears all of your
or Unmark selections
All
Delete
Deletes a file saved in a USB storage
device.
Close
Closes the pop-up menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENTERTAINMENT 31
A movie file more than 30GB in file size is not
supported for playback.
A DivX movie file and its subtitle file must be
located in the same folder.
y
y
y
y
Viewing Movies
Play video files on the Monitor set. Your Monitor
set displays all of the video files saved in a USB
storage device.
A video file name and its subtitle file name
must be identical for it to be displayed.
Playing a video via a USB connection that
doesn’t support high speed may not work
properly.
Files encoded with GMC (Global Motion
Compensation) may not be played.
When you are watching the movie by Movie
List function, you can adjust an image by
Energy Saving key on the remote control.
User setup for each image mode does not
operate.
Movie (*.dat / *.mpg / *.mpeg / *.vob/ *.m4v /
*.avi / *.divx) supporting file.
y
y
Video format: MPEG1, MPEG2,
MPEG4(Doesn’t support Microsoft MPEG
4-V2, V3), DivX 3.xx, DivX 4.xx, DivX 5.xx,
DivX VOD(DRM), XviD, DivX 6.xx(Playback)
Audio format: Mpeg, Mp3, PCM
Bit rate: within 32 kbps to 320 kbps (MP3)
Subtitle format: *.smi / *.srt / *.sub (Micro
DVD, SubViewer 2.0) / *.ass / *.ssa / *.txt (DVD
Subtitle System).
y
y
y
y
y
Some user-created subtitles may not work
properly.
Some special characters are not supported in
subtitles.
y
y
Video Decoder
mpg, mpeg, vob, dat: MPEG1, MPEG2
avi, divx, m4v: MPEG4 SP, MPEG4 ASP,
Divx 3.xx, Dvix 4.xx, Dvix 5.xx, Dvix 6.xx
(Playback), XviD
y
y
HTML tags are not supported in subtitles.
Subtitles in languages other than the
supported languages are not available.
Time information in an external subtitle file
should be arranged in ascending order to be
played.
The screen may suffer temporary interruptions
(image stoppage, faster playback, etc.) when
the audio language is changed.
A damaged movie file may not be played
correctly, or some player functions may not be
usable.
Movie files produced with some encoders may
not be played correctly.
y
y
y
y
y
Audio Codec
mpg, mpeg, vob, dat, avi, divx, m4v: AC3,
MPEG, MP3, PCM
y
Max Resolution
y
y
720 x 576 @ 25p
720 x 480 @ 30p
y
y
If the video and audio structure of recorded
file is not interleaved, either video or audio is
outputted.
HD videos with a maximum of 1920 x 1080
@ 25/30P or 1280 x 720 @ 50/60P are
supported, depending on the frame.
Videos with resolutions higher than 1920 x
1080 @ 25/30P or 1280 x 720 @ 50/60P may
not work properly depending on the frame.
Movie files other than the specified types and
formats may not work properly.
Max bit rate of playable movie file is 20
Mbps.
We do not guarantee smooth playback of
profiles encoded level 4.1 or higher in H.264 /
AVC.
y
y
y
y
y
DTS Audio codec is not supported.
y
Download from Www.Somanuals.com. All Manuals Search And Download.
32 ENTERTAINMENT
Press the Navigation buttons to scroll to USB
and press OK.
1
2
Press the Navigation buttons to scroll to Movie
List and press OK.
Select Drive1 to access the connected USB
storage device.
3
4
Option
Press the Navigation buttons to scroll to a
folder you want and press OK.
Press the Navigation buttons to scroll to a file
you want and press OK.
Picture Size
Subtitle Language
Audio Language
Subtitle File
● Language
● Sync
◀
Full Screen
▶
5
1/6
1/6
A pop-up window will appears.
Off
Latin 1
+0.5
15
USB Device
Movie List
Free Space 150 MB
Duration
Page 2/3
No Marked
Movie
M002
Title
● Position
Up Folder
1366x768, 125KB
Play
Favorite Music
M001
OK
Mark All
Delete
Close
M002
01:30:20
640x480, 720KB
Up Folder
M001
M001
Navigation
Option
MARK
EXIT Exit
Page Change
Mark
When you select the Set Video Play.
Menu
Description
Play video by using the following menus.
Picture
Size
Selects your desired picture format during
movie play
6
Menu
Description
Subtitle
Changes the Language Group of the
Language subtitle/audio during movie play.
or Audio
Language
Play or
Play
Marked
Plays a movie or plays the selected
movie.
Drive: Views videos saved in a USB
y
storage drive.
Language Selects your desired Language.
Mark All
or Unmark selections.
All
Selects all files or clears all of your
Sync
Adjusts the time synchronisation of the
subtitle from -10 secs to +10 secs by
steps of 0.5 secs during
Delete or
Delete
marked
Deletes a file formatted on the FAT32
file system and saved in a USB
storage device.
movie play.
Position
Changes the position of the subtitle either
up or down during movie play.
Close
Closes the pop-up menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENTERTAINMENT 33
Press the Navigation button to show the
When you select the Set Video.
1
2
Picture Size, Audio Language or Subtitle
Press the Navigation button to make
appropriate adjustments. See p.9
1
Language.
Press the Navigation button to make
appropriate adjustments.
When you select the Set Audio,
Subtitle
Support Language
Language
Press the Navigation button to show the
1
Latin1
English, Spanish, French, German,
Italian, Swedish, Finnish, Dutch,
Portuguese, Danish, Romanian,
Norwegian, Albanian, Gaelic, Welsh,
Irish, Catalan, Valencian
Sound Mode, Auto Volume, Clear Voice II,
Balance.
Press the Navigation button to make
2
Latin2
Bosnian, Polish, Croatian, Czech,
appropriate adjustments.
Using the remote control.
Slovak, Slovenian, Serbian, Hungarian
Latin4
Estonian, Latvian, Lithuanian
Cyrillic
Bulgarian, Macedonian, Russian,
Ukrainian, Kazakh
Button
ꕚ ꕙ
Description
When playing,
repeatedly, press the REW( ) button
ꔊꔊ ꔊꔊꔊ
Greek
Greek
ꔊꔊ
Hebrew
Chinese
Korean
Hebrew
Chinese
Korean
to speed up (x2)
ꔊꔊꔊꔊ ꔊꔊꔊꔊꔊ
(x4)
ꔊꔊꔊꔊꔊꔊ
(x32) .
(x8)
repeatedly, press the FF( ) button
ꔋꔋ ꔋꔋꔋ ꔋꔋꔋꔋ
(x16)
ꔋꔋ
(x4)
(x32).
to speed up (x2)
ꔋꔋꔋꔋꔋ ꔋꔋꔋꔋꔋꔋ
(x8)
(x16)
Pressing these buttons repeatedly
increases the fast forward/reverse
speed.
y
ꕘ
Pause (
ꕘ
)
)
During playback, press the Pause (
button.
NOTE
Still screen is displayed.
y
y
Only the files saved in ASCII CODE is
supported for the external subtitles of the
movie.
Only 500 alphabets and 500 numbers are
supported for each line of the subtitle.
Only 10,000 of sync blocks can be
supported within the subtitle file.
y
If no buttons are pressed on the
remote control for 10 minutes after
pausing, the Monitor set returns to
the playback state.
y
y
ꕘ
Press the Pause ( ) button and
y
ꔋꔋ
then use the FF ( ) button for slow
motion.
■
During playback, stops the screen.
(ꕖ)
button to return to
(ꕖ)
Play
Press the Play
normal playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
34 ENTERTAINMENT
DivX registration code
Deactivating the DivX feature
Check and register the DivX registration code of
your Monitor set so that you can rent or purchase
rented or purchased DivX file, the file’s registration
code should be same with your Monitor set’s DivX
registration code.
Deactivate all of the devices through the web
server and block devices from activating.
Delete the existing authentication information to
receive a new DivX user authentication for the
Monitor set. Once this function is executed, a DivX
user authentication is required again to see DivX
DRM files.
Press MENU to access the USB menus.
1
2
Press MENU to access the USB menus.
1
2
Press the Navigation button to scroll to DivX
Reg. Code and press OK.
Press the Navigation button to scroll to
Deactivation and press OK.
View the registration code of your Monitor set.
3
Select Yes to confirm.
3
DivX(R) Video On Demand
DivX(R) Video On Demand
Your registration Code is: xxxxxxxxxx
Do you want to deactivate your device?
Yes
No
Close
NOTE
Select Close.
4
While you are checking the registration code,
some buttons may not work.
y
If you use the DivX registration code of
another device, you cannot play the rented
or purchased DivX file. Make sure to use
the DivX registration code assigned to your
Monitor set.
y
DivX(R) Video On Demand
This device is deactivated.
Your deactivation code is: xxxxxxxx
Close
The video or audio files that are not
converted by the standard DivX codec may
be corrupted or not be played.
The DivX VOD code allows you to activate
up to 6 devices under one account.
y
y
When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING CONNECTIONS 35
MAKING CONNECTIONS
Connect various external devices to the ports on the Monitor set’s back panel.
Find an external device you want to connect to your Monitor set shown on the following illustration.
Check the connection type of the external device.
1
2
3
Go to the appropriate illustration and check the connection details.
HD Receiver
DVD
VCR
Component - See p.37
AV(CVBS)
Component
Speaker
USB
Memory storage
PC
Gaming device
Camcorder/Camera
AV(CVBS)
Component
NOTE
If you connect a gaming device to the Monitor set, use the cable supplied with the gaming device.
y
Download from Www.Somanuals.com. All Manuals Search And Download.
36 MAKING CONNECTIONS
HDMI/DVI connection
Connecting to a HD receiver,
DVD, Camcorder, Camera,
Gaming Device or VCR player
Transmits the digital video signal from an external
device to the Monitor set. Connect the external
device and the Monitor set with the HDMI/DVI
cable as shown in the following illustration. To
transmit an audio signal, connect an optional audio
cable.
Connect a HD receiver, DVD, or VCR player to the
Monitor set and select an appropriate input mode.
HDMI connection
Transmits the digital video and audio signals from
an external device to the Monitor set. Connect the
external device and the Monitor set with the HDMI
cable as shown on the following illustration.
RCA-PC
HDMI-DVI
Signal Cable
(not included)
Audio Cable
(not included)
HDMI Signal Cable
(not included)
NOTE
Use a High Speed HDMI™ Cable.
High Speed HDMI™ Cables are tested to
carry an HD signal up to 1080p and higher.
y
y
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING CONNECTIONS 37
Component connection
AV(CVBS) connection
Transmits the analog video and audio signals from
an external device to the Monitor set. Connect
the external device and the Monitor set with the
component cable as shown on the following
illustration. To display images by using progressive
scan, make sure to use the component cable.
Transmits the analog video and audio signals from
an external device to the Monitor set. Connect the
external device and the Monitor set with the BNC
cable as shown on the following illustration.
AV IN / OUT
IN
PC
VIDEO
AUDIO
OUT
RCA-PC
Audio Cable
(not included)
BNC Cable
(not included)
Download from Www.Somanuals.com. All Manuals Search And Download.
38 MAKING CONNECTIONS
Connecting to the LAN
LAN connection
Connect the LAN cable and install the eZ-Net
Manager program on the CD-ROM.
For more information about the program, please
refer to eZ-Net Guide in the enclosed CD-ROM.
Connect PC to Monitor directly.
LAN
A
PC
Monitor Set
Using a router(Switch)
B
LAN
Switch
Monitor Set
PC
Using the Internet.
C
LAN
Network
PC
Monitor Set
NOTE
Using LAN establishes communication
between your PC and the monitor and
enables to use the OSD menus on the PC as
well as on the monitor.
y
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING CONNECTIONS 39
Daisy Chain Monitors
Use this function to share the RGB video signal with other monitors without having to use a separate signal
splitter box.
• To use different products connected to each other Connect one end of the signal input cable (15-pin
D-Sub Signal Cable) to the RGB OUT connector of product 1 and connect the other end to the RGB IN
connector of other products
RGB Mode
15-pin D-Sub Signal Cable
(Max 3m)
Product 1
Product 2
Product 3
Product 4
AV(CVBS) Mode
Audio Cable
(Not included)
AV IN OUT
AV IN OUT
AV IN OUT
IN
IN
IN
VIDEO
AUDIO
VIDEO
AUDIO
VIDEO
AUDIO
OUT
OUT
OUT
BNC Cable
(Not included)
Product 1
Product 2
Product 3
NOTE
When multi-connecting in/out cascade format, no loss cables are recommended.
We recommend that you should use cable distributor.
y
y
Download from Www.Somanuals.com. All Manuals Search And Download.
40 TROUBLESHOOTING
TROUBLESHOOTING
No image is displayed
Problem
Resolution
Is the product power cord
connected?
See if the power cord is properly connected to the outlet.
y
Is the power indicator light on?
See if the power switch is turned on.
May need service.
y
y
Power is on, power indicator
is blue but the screen appears
extremely dark.
Adjust brightness and contrast again.
Backlight may need repair.
y
y
The power indicator amber?
If the product is in power saving mode, move the mouse or press any
y
key.
Turn both devices off and then back on.
y
y
Does the 'Out of range'
message appear?
The signal from the PC (video card) is out of the vertical or horizontal
frequency range of the product. Adjust the frequency range by
referring to the Specifications in this manual.
* Maximum resolution
RGB : 1920 x 1080 @ 60 Hz
HDMI/DVI : 1920 x 1080 @ 60 Hz
Does the 'Check signal cable'
message appear?
The signal cable between PC and product is not connected. Check
the signal cable.
Press the 'INPUT' menu in the remote Control to check the input
signal.
y
y
'Unknown Product' message appears when the product is connected.
Problem
Resolution
Did you install the driver?
Install the product driver, which is provided with the product, or
download it from the web site. (http://www.lg.com)
See if the plug&play function is supported by referring to the video
card user manual.
y
y
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING 41
'Key Lock On' message appears.
Problem
Resolution
The 'Key Lock On' message
appears when pressing the
Menu button.
The control locking function prevents unintentional OSD setting
change due to careless usage. To unlock the controls, simultaneously
press the Menu button and ► button for several seconds. (You
cannot set this function using the remote control buttons. You can set
this function in the product only.)
y
The screen image looks abnormal.
Problem
Resolution
Is the screen position wrong?
D-Sub analog signal - Press the "AUTO" button in the remote control
to automatically select the optimal screen status that fits into the
current mode. If adjustment is not satisfactory, use the Position OSD
menu.
y
See if the video card resolution and frequency are supported by the
product. If the frequency is out of range, set to the recommended
resolution in the Control Panel "Display" Setting menu.
y
y
Do thin lines appear on the
background screen?
D-Sub analog signal - Press the "AUTO" button in the remote control
to automatically select an optimal screen status that fits into the
current mode. If adjustment is not satisfactory, use the Clock OSD
menu.
Horizontal noise appears or the
characters look blurred.
D-Sub analog signal - Press the "AUTO" button in the remote control
to automatically select an optimal screen status that fits into the
current mode. If adjustment is not satisfactory, use the Phase OSD
menu.
y
y
The screen is displayed
abnormally.
The proper input signal is not connected to the signal port. Connect
the signal cable that matches with the source input signal.
After-image appears on the product.
Problem
Resolution
After-image appears when the
product is turned off.
If you use a fixed image for a long time, the pixels may be damaged
quickly. Use the screen-saver function.
y
Download from Www.Somanuals.com. All Manuals Search And Download.
42 TROUBLESHOOTING
The audio function does not work.
Problem
Resolution
No sound?
See if the audio cable is connected properly.
Adjust the volume.
See if the sound is set properly.
y
y
y
Sound is too dull.
Sound is too low.
Select the appropriate equalize sound.
y
Adjust the volume.
y
Screen color is abnormal.
Problem
Resolution
Screen has poor color resolution
(16 colors).
Set the number of colors to more than 24 bits (true color) Select
Control Panel - Display - Settings - Color Table menu in Windows.
y
y
y
Screen color is unstable or
mono-colored.
Check the connection status of the signal cable. Or, re-insert the PC
video card.
Do black spots appear on the
screen?
Several pixels (red, green, white or black color) may appear on the
screen, which can be attributable to the unique characteristics of the
LCD panel. It is not a malfunction of the LCD.
The operation does not work normally.
Problem
Resolution
The power suddenly turned off.
Is the sleep timer set?
Check the power control settings. Power interrupted.
"CAUTION! FAN STOP!"
y
y
y
If the power is turned off after this message appears, it means that
the fan is out of order.In this case, contact your local service center.
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS 43
SPECIFICATIONS
LCD Panel
Screen Type
1638.3 mm Wide (64.5 inch) TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel.
Visible diagonal size : 1638.3 mm
Pixel Pitch
0.744 mm (H) x 0.744 mm (V)
Video Signal
Max. Resolution
RGB : 1920 X 1080 @60Hz
HDMI/DVI : 1920 X 1080 @60Hz
- It may not be supported depending on the OS or video card type.
Recommended Resolution RGB : 1920 X 1080 @60Hz
HDMI/DVI : 1920 X 1080 @60Hz
- It may not be supported depending on the OS or video card type.
Horizontal Frequency
Vertical Frequency
Synchronization Type
RGB : 30 kHz to 83 kHz
HDMI/DVI : 30 kHz to 83 kHz
RGB : 56 Hz to 75 Hz
HDMI/DVI : 56 Hz to 60 Hz
Separate Sync, Composite Sync, Digital
Input Connector
Power
15-pin D-Sub type, HDMI (digital), Composite Video,
RS-232C, LAN
Rated Voltage
AC 100-240 V~ 50/60 Hz 4.6 A
Power Consumption
On Mode : 480 W Typ.
Sleep Mode : ≤ 1 W (RGB) / 2 W (HDMI/DVI)
Off Mode : ≤ 0.5 W
Environmental
conditions
Operating Temperature
Operating Humidity
0 °C to 40 °C
10 % to 80 %
Storage Temperature
Storage Humidity
-20 °C to 60 °C
5 % to 95 %
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
Download from Www.Somanuals.com. All Manuals Search And Download.
44
SPECIFICATIONS
/ Dimensions
(Width x Height x
Depth) / Weight
H
W
D
1535.4 mm x 136.7 mm x 907.6 mm / 51.1 kg
H
W
D
1535.4 mm x 136.7 mm x 907.6 mm / 51.85 kg
* Applicable only for models that support the speakers
Audio
RMS Audio Output
Input Sensitivity
10 W + 10 W (R + L)
0.7 Vrms
Speaker Impedance
8 Ω
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
Download from Www.Somanuals.com. All Manuals Search And Download.
45
SPECIFICATIONS
DTV Mode
Resolution
RGB (PC) supported mode
HDMI/DVI
(DTV)
Horizontal
Resolution
Vertical
Component
Frequency(kHz) Frequency(Hz)
480i
o
o
o
o
o
o
o
x
x
o
o
o
o
o
31.469
31.468
31.469
37.5
70.8
70.8
59.94
75
640 x 350
576i
720 x 400
480p
576p
720p
1080i
1080p
640 x 480
640 x 480
37.879
46.875
49.725
48.363
60.123
44.772
47.7
60.317
75
800 x 600
800 x 600
74.55
60
832 x 624
1024 x 768
1024 x 768
1280 x 720
1280 x 768
1360 x 768
1366 x 768
1280 x 1024
1280 x 1024
1680 x 1050
1920 x 1080
75.029
59.855
60
Power Indicator
Mode
Product
47.72
47.7
59.799
60
On Mode
Sleep Mode
Off Mode
Green
Amber
-
63.981
79.98
65.290
67.5
60.02
75.02
59.954
60
NOTE
DTV/PC selection on RGB and HDMI/DVI
inputs is available for PC resolutions : 640
x 480 / 60 Hz, 1280 x 720 / 60 Hz, 1920 x
1080 / 60 Hz and DTV resolutions : 480p,
720p, 1080p.
y
HDMI/DVI(PC) supported mode
Horizontal
Resolution
Vertical
NOTE
Frequency(kHz) Frequency(Hz)
31.469
37.879
48.363
44.772
47.72
47.7
59.94
60.317
60
640 x 480
Vertical frequency: To enable the user to
watch the product display, screen image
should be changed tens of times every
second like a fluorescent lamp. The vertical
frequency or refresh rate is the times of
image display per second. The unit is Hz.
Horizontal frequency: The horizontal interval
is the time to display one horizontal line.
When 1 is divided by the horizontal interval,
the number of horizontal lines displayed
every second can be tabulated as the
horizontal frequency. The unit is kHz.
y
y
800 x 600
1024 x 768
1280 x 720
1360 x 768
1366 x 768
1280 x 1024
1680 x 1050
1920 x 1080
59.855
59.799
60
63.981
65.290
67.5
60.02
59.954
60
Download from Www.Somanuals.com. All Manuals Search And Download.
46 IR CODES
IR CODES
This feature is not available for all models.
y
Code (Hexa)
Function
Note
ꕊ
95
Energy Saving (
(POWER)
INPUT
)
R/C BUTTON
08
R/C BUTTON (POWER ON/OFF)
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
0B
C4
C5
79
Monitor On
Monitor Off
ARC (MARK)
MENU
43
ꕌ
)
40
Up (
ꕍ
Down (
Left (<)
41
)
07
06
Right (>)
ꔉ
OK( )
44
ꕉ
)
28
BACK(
EXIT
5B
4D
02
PSM
( + )
( - )
MUTE
03
09
ꕌ
E0
E1
10 to 19
72
Bright (Page UP)
ꕍ
Bright (Page Down)
Number Key 0 to 9
Red Key
Green Key
Yellow Key
Blue Key
TILE
71
63
61
7B
5A
BF
D5
C6
76
AV(CVBS)
Component
RGB PC
HDMI/DVI
ARC (4:3)
ARC (16:9)
ARC (ZOOM)
Auto Config.
ꕗ
77
AF
99
B1
B0
BA
8F
8E
ꕖ
ꕘ
ꕚ
ꕙ
Download from Www.Somanuals.com. All Manuals Search And Download.
EXTERNAL CONTROL DEVICE SETUP 47
CONTROLLING THE MULTIPLE PRODUCT
Use this method to connect several products to a single PC. You can control several products at a
time by connecting them to a single PC.
In the Option menu, Set ID must be between 1 and 225 without being duplicated.
y
y
Connecting the cable
Connect the RS-232C cable as shown in the picture.
The RS-232C protocol is used for communication between the PC and product. You can turn the
product on/off, select an input source or adjust the OSD menu from your PC.
y
RS-232C Cable
(not included)
PC
Monitor Set 1 Monitor Set 2 Monitor Set 3 Monitor Set 4
RS-232C Configurations
7-Wire Configurations (Standard RS-232C cable)
3-Wire Configurations (Not Standard)
PC
Set
PC
Set
3
2
5
6
4
7
8
3
2
5
6
4
8
7
RXD
TXD
GND
DTR
DSR
RTS
CTS
RXD
TXD
GND
DTR
DSR
RTS
CTS
2
3
5
4
6
7
8
TXD
RXD
GND
DSR
DTR
CTS
RTS
TXD
RXD
GND
DSR
DTR
CTS
RTS
2
3
5
4
6
7
8
D-Sub 9
(Female)
D-Sub 9
(Female)
D-Sub 9
(Female)
D-Sub 9
(Female)
Communication Parameter
Baud Rate : 9600 buad Rate (UART)
Data Length : 8 bit
Parity Bit : None
Stop Bit : 1bit
Flow Control : None
y
y
y
y
y
y
y
Communication Code : ASCII code
Use a crossed (reverse) cable
Download from Www.Somanuals.com. All Manuals Search And Download.
48 EXTERNAL CONTROL DEVICE SETUP
Command reference list
COMMAND
DATA
2
1
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
j
2
a
b
c
d
e
f
1
3
01. Power
00H to 01H
02H to 09H
01H to 1FH
00H to 01H
00H to 01H
00H to 64H
00H to 64H
00H to 64H
00H to 64H
00H to 64H
00H to 64H
00H to 01H
00H to 01H
00H to 64H
00H to 02H
FFH
02. Input Select
03. Aspect Ratio
04. Screen Mute
05. Volume Mute
06. Volume Control
07. Contrast
g
h
i
08. Brightness
09. Color
10. Tint
j
11. Sharpness
k
l
12. OSD Select
13. Remote Lock/ key Lock
14. Balance
m
t
15. Color Temperature
16. Abnomal state
17. ISM mode
u
z
p
u
c
d
e
f
01H to 08H
01H
18. Auto configuration
19. Key
j
m
d
d
d
d
d
d
d
d
d
d
d
d
d
d
d
f
Key Code
00H to 55H
00H to 14H
00H to 14H
00H to 64H
00H to 64H
00H to 19H
00H to 01H
00H to 06H
00H to 05H
FFH
20. Tile Mode
21. Tile H Position
22. Tile V Position
23. Tile H Size
g
h
i
24. Tile V Size
25. Tile ID Set
26. Natural Mode (In Tile mode)
27. Picture mode (PSM)
28. Sound mode
29. Fan Fault check
30. Elapsed time return
31. Temperature value
32. Lamp fault check
33. Auto Volume
34. Speaker
j
x
y
w
l
FFH
n
p
u
v
a
d
FFH
FFH
00H to 01H
00H to 01H
35. Time
00H to 06H
F1H to F4H
E0H to E4H
01H to 80H
F1H to F4H
E0H to E4H
01H to 80H
F1H to F4H
00H to 17H
00H to 17H
00H to 3BH
00H to 3BH
36. On Timer (On/Off Timer) Time
f
37. Off Timer (On/Off Timer) Time
38. Scheduling input select
f
f
e
u
00H to 17H
02H to 09H
00H to 3BH
Download from Www.Somanuals.com. All Manuals Search And Download.
EXTERNAL CONTROL DEVICE SETUP 49
COMMAND
DATA
1
f
2
f
1
2
3
39. Sleep Time
40. Auto Sleep
41. Power On Delay
42. Language
00H to 08H
00H to 01H
00H to 64H
00H to 09H
00H to 01H
00H to 02H
00H to 03H
00H to 01H
FFH
f
g
h
i
f
f
43. DPM Select
44. Reset
f
j
f
k
l
45. Power Saving
46. Power Indicator
47. Serial no.
f
f
o
y
z
b
f
48. S / W Version
49. Input Select
f
FFH
x
20H to A0H
Note : During USB operations such as Dvix or EMF, all commands except Power(ka) and Key(mc) are
not executed and treated as NG.
y
Download from Www.Somanuals.com. All Manuals Search And Download.
50 EXTERNAL CONTROL DEVICE SETUP
Transmission / Receiving protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
* [Command 1]: First command. (k, j, m, d, f, x)
* [Command 2]: Second command.(a to u)
* [Set ID]: Set up the Set ID number of product.
range : 01H to 63H. by setting '0', server can control all products.
* In case of operating with more than 2 sets using set ID as '0' at the same time, it should not be checked the ack
message. Because all sets will send the ack message, so it's impossible the check the whole ack messages.
* [DATA]: To transmit command data.
Transmit 'FF' data to read status of command.
* [Cr]: Carriage Return (ASCII code '0 x 0 D')
* [ ]: ASCII code Space (0 x 20)
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
* The Product transmits ACK (acknowledgement) based on this format when receiving normal data. At this time,
if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of
the PC computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
* If there is error, it returns NG
Download from Www.Somanuals.com. All Manuals Search And Download.
EXTERNAL CONTROL DEVICE SETUP 51
01. Power (Command: k a)
04. Screen Mute (Command: k d)
To control Power On/Off of the set.
To select screen mute on / off.
Transmission
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
[k][d][ ][Set ID][ ][Data][Cr]
Data 00 : Power Off
Data 01 : Power On
Data 00 : Screen mute off (Picture on)
01 : Screen mute on (Picture off)
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
To show the status of Power On/Off.
Acknowledgement
[d][ ][Set ID][ ][OK][Data][x]
Transmission
[k][a][ ][Set ID][ ][FF][Cr]
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
Data 00 : Power Off
Data 01 : Power On
02. Input Select (Command: k b) (Main Picture Input)
To select input source for the Set.
05. Volume Mute (Command: k e)
To control On/Off of the Volume Mute.
You can also select an input source using the INPUT
button on the remote control.
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Transmission
Data 00 : Volume Mute On (Volume Off)
01 : Volume Mute Off (Volume On)
[k][b][ ][Set ID][ ][Data][Cr]
Data 02 : AV(CVBS)
04 : Component
07 : RGB (PC)
Acknowledgement
[e][ ][Set ID][ ][OK][Data][x]
08 : HDMI (DTV)
09 : HDMI (PC)
Data 00 : Volume Mute On (Volume Off)
01 : Volume Mute Off (Volume On)
Acknowledgement
[b][ ][Set ID][ ][OK][Data][x]
Data 02 : AV(CVBS)
04 : Component
07 : RGB (PC)
08 : HDMI (DTV)
09 : HDMI (PC)
06. Volume Control (Command: k f)
03. Aspect Ratio (Command: k c)
To adjust the screen format.
To adjust Volume.
Transmission
You can also adjust the screen format using the ARC
(Aspect Ratio Control) button on remote control or in
the Screen menu.
[k][f][ ][Set ID][ ][Data][Cr]
Data Min : 00H to Max : 64H
(Hexadecimal code)
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data 01 : Normal Screen (4 : 3)
02 : Wide Scran (16 : 9)
[f][ ][Set ID][ ][OK][Data][x]
Data Min : 00H to Max : 64H
* Real data mapping
04 : Zoom (AV(CVBS))
06 : Original (AV(CVBS))
07 : 14 : 9 (AV(CVBS))
0 : STEP 0
09 : Just Scan (HD DTV)
* When the RGB, HDMI / DVI PC mode(1:1)
10 to 1F : Cinema Zoom 1 to 16
B : Full Wide
:
A : STEP 10
:
F : STEP 15
10 : STEP 16
:
Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
64 : STEP 100
Download from Www.Somanuals.com. All Manuals Search And Download.
52 EXTERNAL CONTROL DEVICE SETUP
07. Contrast (Command: k g)
10. Tint (Command: k j)
To adjust screen contrast.
To adjust the screen tint.
You can also adjust the contrast in the Picture menu.
You can also adjust the tint in the Picture menu.
Transmission
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data Min : 00H to Max : 64H
[k][j][ ][Set ID][ ][Data][Cr]
Data Min : 00H to Max : 64H
(Hexadecimal code)
00H : Step R50
Acknowledgement
64H : Step G50
[g][ ][Set ID][ ][OK][Data][x]
Data Min : 00H to Max : 64H
Acknowledgement
[j][ ][Set ID][ ][OK][Data][x]
Data Min : 00H to Max : 64H
* Tint Real data mapping
0 : Step 0 to Red
:
64 : Step 100 to Green
11. Sharpness (Command: k k) (Video input only)
To adjust the screen Sharpness.
You can also adjust the sharpness in the Picture
menu.
08. Brightness (Command: k h)
To adjust screen brightness.
You can also adjust the brightness in the Picture
menu.
Transmission
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
[k][h][ ][Set ID][ ][Data][Cr]
Data Min : 00H to Max : 64H
(Hexadecimal code)
Data Min : 00H to Max : 64H
(Hexadecimal code)
Acknowledgement
Acknowledgement
[k][ ][Set ID][ ][OK][Data][x]
Data Min : 00H to Max : 64H
[h][ ][Set ID][ ][OK][Data][x]
09. Color (Command: k i) (Video Timing only)
To adjust the screen color.
12. OSD Select (Command: k l)
To control OSD on/off to the set.
You can also adjust the color in the Picture menu.
Transmission
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
[k][i][ ][Set ID][ ][Data][Cr]
Data 00: OSD Off
Data 01: OSD On
Data 01: OSD On
Data Min : 00H to Max : 64H
(Hexadecimal code)
Acknowledgement
[l][ ][Set ID][ ][OK][Data][x]
Data 00: OSD Off
Acknowledgement
[i][ ][Set ID][ ][OK][Data][x]
Data Min : 00H to Max : 64H
Download from Www.Somanuals.com. All Manuals Search And Download.
EXTERNAL CONTROL DEVICE SETUP 53
13. Remote Lock /Key Lock (Command: k m)
To control Remote Lock on/off to the set.
This function, when controlling RS-232C, locks the
remote control and the local keys.
16. Abnormal state (Command: k z)
Used to Read the power off status when Stand-by
mode.
Transmission
Transmission
[k][z][ ][Set ID][ ][Data][Cr]
Data FF : Read
[k][m][ ][Set ID][ ][Data][Cr]
Data 00: Off
Data 01: On
Acknowledgement
Acknowledgement
[z][ ][Set ID][ ][OK][Data][x]
[m][ ][Set ID][ ][OK][Data][x]
Data 00 : Normal (Power on and signal exist)
01 : No signal (Power on)
Data 00: Off
Data 01: On
02 : Turn the monitor off by remote control
03 : Turn the monitor off by sleep time function
04 : Turn the monitor off by RS-232C function
08 : Turn the monitor off by off time function
09 : Turn the monitor off by auto off function
14. Balance (Command: k t)
17. ISM mode (Command: j p)
To adjust the sound balance.
Used to select the afterimage preventing function.
Transmission
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
[j][p][ ][Set ID][ ][Data][Cr]
Data Min : 00H to Max : 64H
(Hexadecimal code)
Data 01 : Inversion
02 : Orbiter
04 : White Wash
08 : Normal
00H : Step L50
64H : Step R50
Acknowledgement
Acknowledgement
[p][ ][Set ID][ ][OK][Data][x]
[t][ ][Set ID][ ][OK][Data][x]
Data Min : 00H to Max : 64H
(Hexadecimal code)
00H : Step 0 to L50
64H : Step 100 to R50
* Balance : L50 to R50
15. Color Temperature (Command: k u)
18. Auto Configure (Command: j u)
To adjust picture position and minimize image
shaking.
To adjust the screen color temperature.
Transmission
Automatically. NB : Only applies to RGB(PC) mode.
[k][u][ ][Set ID][ ][Data][Cr]
Transmission
Data 00 : Medium
01 : Cool
[j][u][ ][Set ID][ ][Data][Cr]
Data 01 : To set
02 : Warm
Acknowledgement
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
[u][ ][Set ID][ ][OK][Data][x]
Data 00 : Medium
01 : Cool
02 : Warm
Download from Www.Somanuals.com. All Manuals Search And Download.
54 EXTERNAL CONTROL DEVICE SETUP
19. Key (Command: m c)
22. Tile V Position (Command: d f)
To send IR remote key code.
To set the Vertical position.
Transmission
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
[d][f][ ][Set ID][ ][Data][Cr]
Data Min : 00H to Max : 14H
00H : Step -10(Down)
14H : Step 10(Up)
Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
20. Tile Mode (Command: d d)
23. Tile H Size (Command: d g)
Change a Tile Mode.
To set the Horizontal size.
Transmission
Transmission
[d][d][ ][Set ID][ ][Data][Cr]
[d][g][ ][Set ID][ ][Data][x]
Data Min : 00H to Max : 64H
Data
Description
00 or 11
12
Tile mode is off.
1 x 2 mode (column x row)
1 x 3 mode
Acknowledgement
13
14
1 x 4 mode
[g][ ][Set ID][ ][OK/NG][Data][x]
...
...
55
1 x 2 mode
* The data can not be set to 0X or X0 except 00.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data][x]
24. Tile V Size (Command: d h)
21. Tile H Position (Command: d e)
To set the Vertical size.
To set the Horizontal position.
Transmission
Transmission
[d][h][ ][Set ID][ ][Data][x]
[d][e][ ][Set ID][ ][Data][Cr]
Data Min : 00H to Max : 14H
Data Min : 00H to Max : 64H
00H : Step -10(Left)
14H : Step 10(Right)
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data][x]
Download from Www.Somanuals.com. All Manuals Search And Download.
EXTERNAL CONTROL DEVICE SETUP 55
25. Tile ID Set (Command: d i)
28. Sound Mode (Command: d y)
To assign the Tile ID for Tiling function.
To adjust the Sound mode.
Transmission
Transmission
[d][i][ ][Set ID][ ][Data][x]
[d][y][ ][Set ID][ ][Data][x]
Data Structure
Data Min : 00H to Max : 19H
(Hexadecimal code)
Data(Hex)
Mode
01
02
03
04
05
Standard
Music
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
Cinema
Sport
Game
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
26. Natural Mode (Command: d j)
29. Fan Fault check (Command: d w)
To assign the Tile Natural mode for Tiling function.
To check the Fan fault of the Set.
Transmission
Transmission
[d][j][ ][Set ID][ ][Data][x]
[d][w][ ][Set ID][ ][Data][x]
Data 00 : Natural Off
01 : Natural On
* The data is always FF (in Hex).
Data ff : Read Status
ff : Read Status
Acknowledgement
Acknowledgement
[w][ ][Set ID][ ][OK/NG][Data][x]
[j][ ][Set ID][ ][OK/NG][Data][x]
* Data is the status value of the Fan fault.
Data 00 : Fan fault
01 : Fan Ok
02 : N/A (Not Avaliable)
27. Picture Mode (Command: d x)
30. Elapsed time return (Command: d l)
To adjust the picture mode.
To read the elapsed time.
Transmission
Transmission
[d][x][ ][Set ID][ ][Data][x]
Data Structure
[d][l][ ][Set ID][ ][Data][x]
* The data is always FF(in Hex).
Data(Hex)
Mode
Acknowledgement
00
01
02
03
04
05
06
Vivid
Standard
Cinema
Sport
[l][ ][Set ID][ ][OK/NG][Data][x]
* The data is always FF(in Hex).
(Hexadecimal code)
Game
Export 1
Export 2
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data][x]
Download from Www.Somanuals.com. All Manuals Search And Download.
56 EXTERNAL CONTROL DEVICE SETUP
31. Temperature value (Command: d n)
34. Speaker (Command: d v)
To read the inside temperature value.
Turn the speaker on or off.
Transmission
Transmission
[d][n][ ][Set ID][ ][Data][x]
* The data is always FF(in Hex).
[d][v][ ][Set ID][ ][Data][x]
Data 00: Off
Data 01: On
Acknowledgement
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
* The data is 1 byte long in Hexadecimal.
[v][ ][Set ID][ ][OK/NG][Data][x
32. Lamp fault Check (Command: d p)
35. Time (Command: f a)
To check lamp fault.
Set the current time.
Transmission
Transmission
[d][p][ ][Set ID][ ][Data][x]
* The data is always FF(in Hex).
[f][a][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
[Data1]
00 : Monday
01 : Tuesday
02 : Wednesday
03 : Thursday
04 : Friday
Acknowledgement
[p][ ][Set ID][ ][OK/NG][Data][x]
* The data is 1 byte long in Hexadecimal.
Data 00 : Lamp Fault
05 : Saturday
06 : Sunday
01 : Lamp Ok
02 : N/A (DPM/Power Off)
[Data2]
0H to 17H (Hours)
[Data3]
00H to 3BH (Minutes)
Acknowledgement
33. Auto volume (Command: d u)
[a][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
Automatically adjust the volume level.
*When reading data, FFH is inputted for [Data1],
[Data2] and [Data3]. In other cases, all are treated as
NG.
Transmission
[d][u][ ][Set ID][ ][Data][x]
Data 00: Off
Data 01: On
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
Download from Www.Somanuals.com. All Manuals Search And Download.
EXTERNAL CONTROL DEVICE SETUP 57
36. On Timer (On/Off Timer) Time (Command: f d)
37. Off Timer (On/Off Timer) Time (Command: f e)
Set On Timer.
Set Off Timer.
Transmission
Transmission
[f][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
[f][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
[Data1]
[Data 1]
1. f1h to f4h(read one index)
f1: read 1st index of On Time List
f2: read 2nd index of On Time List
f3: read 3rd index of On Time List
f4: read 4th index of On Time List
1. f1h to f4h(read one index)
f1: read 1st index of Off Time List,
f2: read 2nd index of Off Time List
f3: read 3rd index of Off Time List
f4: read 4th index of Off Time List
2. e1h~e4h(delete one index), e0h(delete all indexes)
e0: delete all indexes of On Time List
e1: delete 1st index of On Time List
e2: delete 2nd index of On Time List
e3: delete 3rd index of On Time List
e4: delete 4th index of On Time List
2. e1h to e4h(delete one index), e0h(delete all
indexes)
e0: delete all indexes of Off Time List
e1: delete 1st index of Off Time List
e2: delete 2nd index of Off Time List
e3: delete 3rd index of Off Time List
e4: delete 4th index of Off Time List
3. 01h to 80h (write) (Day of Week)
bit0 (01h) : Monday
bit1 (02h) : Tuesday
3. 01h to 80h (write) (Day of Week)
bit0 (01h) : Monday
bit2 (04h) : Wednesday
bit3 (08h) : Thursday
bit4 (10h) : Friday
bit1 (02h) : Tuesday
bit2 (04h) : Wednesday
bit3 (08h) : Thursday
bit4 (10h) : Friday
bit5 (20h) : Saturday
bit6 (40h) : Sunday
bit5 (20h) : Saturday
bit7 (80h) : Everyday
(1fh) : Monday to Friday
(3fh) : Monday to Saturday
(60h) : Saturday to Sunday
bit6 (40h) : Sunday
bit7 (80h) : Everyday
(1fh) : Monday to Friday
(3fh) : Monday to Saturday
(60h) : Saturday to Sunday
[Data 2]
00h to 17h (Hours)
[Data 2]
00h to 17h (Hours)
[Data 3]
00h to 3bh (Minutes)
[Data 3]
*When you read/delete the current on time list, all of
[Data2][Data3] are have to be FFH.
(ex1: fd 01 f1 ff ff - when you read 1st index of On
Time List
ex2: fd 01 e1 ff ff - when you delete 1st index of On
Time List
00h to 3bh (Minutes)
*When you read/delete the current on time list, all of
[Data2][Data3] are have to be FFH.
(ex1: fd 01 f1 ff ff - when you read 1st index of Off
Time List
ex2: fd 01 e1 ff ff - when you delete 1st index of Off
Time List
ex3: fd 01 3f 02 03 - when you write one On Time
Data, "Monday to Saturday, 02:03"
ex3: fd 01 3f 02 03 - when you write one Off Time
Data, "Monday to Saturday, 02:03")
Acknowledgement
Acknowledgement
[d][ ][Set ID][ ][OK][Data1][Data2][Data3][x]
[e][ ][Set ID][ ][OK][Data1][Data2][Data3][x]
Download from Www.Somanuals.com. All Manuals Search And Download.
58 EXTERNAL CONTROL DEVICE SETUP
38. Scheduling Input select (Command: f u) (Main
Picture Input)
40. Auto Sleep (Command: f g)
Set Auto Sleep.
To select input source for Set depending on day.
Transmission
Transmission
[f][g][ ][Set ID][ ][Data][Cr]
[f][u][ ][Set ID][ ][Data1][ ][Data2][Cr]
Data 00 : Off
01 : On
[Data 1]
1. f1h to f4h(write/read one index)
f1: read 1st index of Scheduling Input
f2: read 2nd index of Scheduling Input
f3: read 3rd index of Scheduling Input
f4: read 4th index of Scheduling Input
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
[Data 2]
Input
Data(Hex)
Input
02
04
07
08
09
AV(CVBS)
Component
RGB - PC
41. Power On Delay (Command: f h)
Set the schedule delay when the power is turned on
(Unit: second).
HDMI/DVI - HD - DVD
HDMI/DVI - PC
*When you read/delete the current Scheduling Input,
[Data2] needs to be FFH.
(ex1: fu 01 f1 ff - when you read 1st index of
Scheduling Input.
Transmission
[f][h][ ][Set ID][ ][Data][Cr]
Data : 00H to 64H (Data value)
ex2: fu 01 f3 02 - when you write one Scheduling
Input Data in to 3rd index, "AV(CVBS)")
Acknowledgement
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
[u][ ][Set ID][ ][OK][Data1][Data2][x]
42. Language (Command: f i)
39. Sleep Time (Command: f f)
Set the OSD language.
Set Sleep Time.
Transmission
Transmission
[f][i][ ][Set ID][ ][Data][Cr]
[f][f][ ][Set ID][ ][Data][Cr]
Data 00 : English
01 : French
Data 00 : Off
01 : 10
02 : German
03 : Spanish
04 : Italian
02 : 20
03 : 30
04 : 60
05 : 90
06 : 120
07 : 180
08 : 240
05 : Portuguese
06 : Chinese
07 : Japanese
08 : Korean
09 : Russian
Acknowledgement
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
[i][ ][Set ID][ ][OK/NG][Data][x]
Download from Www.Somanuals.com. All Manuals Search And Download.
EXTERNAL CONTROL DEVICE SETUP 59
43. DPM Select (Command: f j)
46. Power Indicator (Command: f o)
Set the DPM (Display Power Management) function.
To set the LED for Power Indicator
Transmission
Transmission
[f][j][ ][Set ID][ ][Data][Cr]
[f][o][ ][Set ID][ ][Data][Cr]
Data 00 : Off
01 : On
Data 00 : Off
01 : On
Acknowledgement
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
[o][ ][Set ID][ ][OK/NG][Data][x]
44. Reset (Command: f k)
47. Serial no.Check (Command: f y)
Set the DPM (Display Power Management) function.
Check the Serial no.
Transmission
Transmission
[f][k][ ][Set ID][ ][Data][Cr]
[f][y][ ][Set ID][ ][Data][Cr]
Data FF (to read the serial numbers)
Data 00 : Picture Reset
01 : Screen Reset
02 : Factory Reset
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data1] to [Data13][x]
* The data format is ASCII Code.
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
45. Power saving (Command: f l)
48. S/W Version (Command: f z)
To set the Power saving mode.
Check the software version.
Transmission
Transmission
[f][l][ ][Set ID][ ][Data][Cr]
[f][z][ ][Set ID][ ][Data][Cr]
Data FFH : Read
Data 00 : Off
01 : static level 1
02 : static level 2
03 : static level 3
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]
Download from Www.Somanuals.com. All Manuals Search And Download.
60 EXTERNAL CONTROL DEVICE SETUP
49. Input Select (Command: x b)
To select input source for the Set.
Transmission
[x][b][ ][Set ID][ ][Data][Cr]
Data 20H : AV(CVBS)
40H : Component
60H : RGB(PC)
90H : HDMI/DVI(DTV)
A0H : HDMI/DVI(PC)
Acknowledgement
[b][ ][Set ID][ ][OK/NG][Data][x]
Data 20H : AV(CVBS)
40H : Component
60H : RGB(PC)
90H : HDMI/DVI(DTV)
A0H : HDMI/DVI(PC)
Download from Www.Somanuals.com. All Manuals Search And Download.
Make sure to read the Safety Precautions
before using the product.
Keep the Owner's Manual(CD) in an accessible
place for future reference.
The model and serial number of the SET is
located on the back and one side of the SET.
Record it below should you ever need service.
MODEL
SERIAL
Temporary noise is normal when powering ON or
OFF this device.
Download from Www.Somanuals.com. All Manuals Search And Download.
|