ENGLISH
User Guide
B2050
Please read this manual carefully before operating your mobile phone.
Retain it for future reference.
Issue 1.1
Part No. MMBB0155004
Printed in Korea
Download from Www.Somanuals.com. All Manuals Search And Download.
Disposal of your old appliance
All electrical and electronic products should be
disposed of separately from the municipal waste
stream via designated collection facilities
appointed by the government or the local
authorities.
When this crossed-out wheeled bin symbol is
attached to a product it means the product is
covered by the European Directive 2002/96/EC.
B2050 User Guide
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Congratulations on your purchase of the advanced and
compact B2050 mobile phone, designed to operate
with the latest digital mobile communication
technology.
This user guide contains important information on
the use and operation of this phone. Please read
all the information carefully for optimal
performance and to prevent any damage to or
misuse of the phone. Any changes or modifications
not expressly approved in this user’s guide could
void your warranty for this equipment.
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
2
Guidelines for safe and efficient use
Read these simple guidelines. Breaking the rules may
be dangerous or illegal. Further detailed information is
given in this manual.
(ICNIRP), which is 2W/kg averaged over ten (10) gram
of tissue.
• The highest SAR value for this model phone which
tested by DASY4 for use at the ear is 1.10 W/kg (10g).
Exposure to radio frequency energy
• SAR data information for residents in
Radio wave exposure and Specific Absorption Rate
(SAR) information
countries/regions that have adopted the SAR limit
recommended by the Institute of Electrical and
Electronics Engineers (IEEE), which is 1.6 W/kg
averaged over one (1) gram of tissue (for example
USA, Canada, Australia and Taiwan).
This mobile phone model B2050 has been designed to
comply with applicable safety requirement for
exposure to radio waves. This requirement is based on
scientific guidelines that include safety margins
designed to assure this safety of all persons,
regardless of age and health.
Product care and maintenance
Warning: Use only batteries, charger and accessories
approved for use with this particular phone model.
The use of any other types may invalidiate any approval
or warranty applying to the phone, and may be
dangerous.
• The radio wave exposure guidelines employ a unit of
measurement known as the Specific Absorption Rate,
or SAR. Tests for SAR are conducted using
standardized method with the phone transmitting at
its highest certified power level in all used frequency
bands.
• Do not disassemble this unit. Take it to a qualified
service technician when repair work is required.
• While there may be differences between the SAR
levels of various LG phone models, they are all
designed to meet the relevant guidelines for
exposure to radio waves.
• Keep away from electrical appliance such as a TV,
radio or personal computer.
• The SAR limit recommended by the International
Commission on Non-Ionizing Radiation Protection
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
3
Guidelines for safe and efficient use
• The unit should be kept away from heat sources such
as radiators or cookers.
Efficient phone operation
To enjoy optimum performance with minimum power
consumption please:
• Do not drop.
• Do not subject this unit to mechanical vibration or
shock.
• Hold the phone as you speak to any other telephone.
While speaking directly into the microphone, angle
the antenna in a direction up and over your shoulder.
If the antenna is extendable/retractable, it should be
extended during a call.
• The coating of the phone may be damaged if covered
with wrap or vinyl wrapper.
• Use dry cloth to clean the exterior of the unit. (Do not
use solvent such as benzene, thinner or alcohol.)
• If your mobile phone supports infrared, never direct
the infrared ray at anyone’s eyes.
• Do not subject this unit to excessive smoke or dust.
• Do not keep the phone next to credit cards or
transport tickets; it can affect the information on the
magnetic strips.
Electronics devices
All wireless phones may get interference, which
could affect performance.
• Do not tap the screen with a sharp object; otherwise,
it may damage the phone.
• Do not use your mobile phone near medical equipment
without requesting permission. Avoid placing the
phone over the pacemaker, i.e. in your breast pocket.
• Do not expose the phone to liquid or moisture.
• Use the accessories like an earphone cautiously. Do
not touch the antenna unnecessarily.
• Some hearing aids might be disturbed by mobile
phones.
• Minor interference may affect TVs, radios, PCs, etc.
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
4
Guidelines for safe and efficient use
Road safety
Potentially explosive atmospheres
Check the laws and regulations on the use of mobile
phones in the areas when you drive.
• Do not use the phone at a refuelling point. Don't use
near fuel or chemicals.
• Do not use a hand-held phone while driving.
• Give full attention to driving.
• Do not transport or store flammable gas, liquid, or
explosives in the compartment of your vehicle, which
contains your mobile phone and accessories.
• Use an handsfree kit, if available.
In aircraft
• Pull off the road and park before making and
answering a call if driving conditions so require.
Wireless devices can cause interference in aircraft.
• RF energy may affect some electonic system in your
motor vehicle such as car stereo, safety equipment.
• Turn off your mobile phone before boarding any
aircraft.
• When your vehicle is equipped with an air bag, do not
obstruct with objects including either installed or
portable wireless equipment. It can cause serious
injury due to improper performance.
• On the ground, follow airline instructions regarding
use of mobile phones.
Children
Blasting area
Keep the phone in a safe place out of children’s reach.
It includes small parts which if detached may cause a
choking hazard.
Do not use the phone where blasting is in progress.
Observe restrictions, and follow any regulations or
rules.
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
5
Guidelines for safe and efficient use
• Do not leave the battery in hot or cold places, this
may deteriorate the battery performance.
Emergency calls
Emergency call may not be available under all cellular
networks. Therefore, you should never depend solely
on the phone for emergency calls. Check with your
local service provider.
• Dispose of used batteries in accordance with local
legislation.
Battery information and care
• You do not need to completely discharge the battery
before recharging. Unlike other battery systems,
there is no memory effect that could compromise the
battery’s performance.
• Use only LG batteries and chargers. LG chargers are
designed to maximize the battery life.
• Do not disassemble or short-circuit the battery pack.
• Keep the metal contacts of the battery pack clean.
• Replace the battery when it no longer provides
acceptable performance. The battery pack may be
recharged hundreds of times until it needs replacing.
• Recharge the battery if it has not been used for a long
time to maximize usability.
• Do not expose the battery charger to direct sunlight
or use it in high humidity, such as the bathroom.
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
6
B2050 User Guide
s
C
o
n
t
e
n
t
Turning your phone on and off ...................................... 18
• Turning your phone ON ............................................................. 18
• Turning your phone OFF ............................................................ 18
Overview
Parts of the Phone ........................................................... 10
• Front view .................................................................................... 10
• Rear view .................................................................................... 11
Additional Functions
Key Description ............................................................... 12
Access codes ................................................................... 19
• PIN code (4 to 8 digits) ............................................................... 19
• PIN2 code (4 to 8 digits) ............................................................. 19
• PUK code (4 to 8 digits) .............................................................. 19
• PUK2 code (4 to 8 digits) ............................................................ 19
• Security code (4 to 8 digits) ...................................................... 19
• Network password ..................................................................... 19
• Keypad Description .................................................................... 12
Display Information
Display Information ......................................................... 14
• On-Screen Icons ......................................................................... 14
Getting Started
Installation ........................................................................ 15
• Inserting the SIM Card .............................................................. 15
• Removing the SIM Card ............................................................. 15
• Installing the Battery .................................................................. 15
• Charging the Battery .................................................................. 16
• Disconnecting the charger ....................................................... 17
General functions ............................................................ 20
• Making and answering calls .................................................... 20
• Phonebook ................................................................................... 24
• In call menu ................................................................................. 24
• Multiparty or conference calls ................................................. 25
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
7
Profiles [Menu-3] ............................................................. 44
• Changing the profile [Menu 3-x-1] ........................................... 44
• Customising profiles - Personalise [Menu 3-x-2] .................. 44
• Customising profiles - Rename [Menu 3-x-3] ........................ 45
Accessing the Menu
Menu Tree ......................................................................... 27
Selecting functions and options ................................... 29
Messages [Menu-1 ] ....................................................... 30
• Write text message [Menu-1-1] ............................................... 30
• Write multimedia messages [Menu-1-2] ................................ 31
• Inbox [Menu-1-3] ........................................................................ 33
• Outbox [Menu-1-4] ..................................................................... 34
• Drafts [Menu-1-5] ....................................................................... 35
• Listen to voice mail [Menu-1-6] ................................................ 35
• Info message [Menu-1-7] .......................................................... 36
• Templates [Menu-1-8] ............................................................... 36
• Settings [Menu-1-9] ................................................................... 38
Settings [Menu-4] ............................................................ 46
• Date & Time [Menu-4-1] ............................................................ 46
• Phone settings [Menu-4-2] ....................................................... 46
• Call settings [Menu-4-3] ............................................................ 47
• Security settings [Menu-4-4] .................................................... 49
• Network settings [Menu-4-5] ................................................... 52
• GPRS setting [Menu-4-6] ........................................................... 53
• Reset settings [Menu-4-7] ......................................................... 53
Organiser [Menu-5] ......................................................... 54
• Alarm clock [Menu-5-1] ............................................................. 54
• Scheduler [Menu-5-2] ................................................................ 54
• Phonebook [Menu-5-3] .............................................................. 55
Call register [Menu-2] .................................................... 41
• Missed calls [Menu-2-1] ........................................................... 41
• Received calls [Menu-2-2] ........................................................ 41
• Dialled calls [Menu-2-3] ............................................................ 41
• Delete recent calls [Menu-2-4] ................................................ 42
• Call charges [Menu-2-5] ............................................................ 42
• GPRS information [Menu-2-6] .................................................. 43
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
8
Tools [Menu-6] ................................................................. 59
• Favorites [Menu-6-1] .................................................................. 59
• Calculator [Menu-6-2] ................................................................ 59
• My folder [Menu-6-3] ................................................................. 60
• Unit converter [Menu-6-4] ........................................................ 60
• World time [Menu-6-5] .............................................................. 60
• Voice recorder [Menu-6-6] ....................................................... 61
• Memory status [Menu-6-7] ....................................................... 61
Games [Menu-8] .............................................................. 67
Accessories ...................................................................... 68
Technical Data ................................................................. 69
Internet [Menu-7] ............................................................. 62
• Home [Menu-7-1] ........................................................................ 62
• Bookmarks [Menu-7-2] .............................................................. 62
• Profiles [Menu-7-3] .................................................................... 63
• Go to URL [Menu-7-4] ................................................................ 65
• Cache settings [Menu-7-5] ....................................................... 65
• Cookies settings [Menu-7-6] ..................................................... 66
• Security certification [Menu-7-7] ............................................ 66
• Reset profiles [Menu-7-8] ......................................................... 66
• Browser version [Menu-7-9] .................................................... 66
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
9
Parts of the Phone
Front view
Earpiece
Display Screen
Message key
Headset jack
Favorites key
Profile Key
Soft Left key
Soft Right key
End/Power key
Clear/Cancel key
Send key
Phone book list key
Numeric keys
Star key
Hash key
Microphone
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
10
Parts of the Phone
Rear view
Handstrap Hole
SIM Card Socket
Battery Terminals
Battery cover
Cable Connector / Battery Charging Connector /
Hands-Free Car kit Connector
Battery
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
11
Key Description
The following shows key components of the phone.
Key
Description
Send Key
Keypad Description
You can dial a phone number and
answer a call. If you press this key
without entering a number, your phone
shows the most recently dialled,
received and missed numbers.
Key
Description
Soft Left Key / Soft Right Key
Each of these keys performs the
function indicated by the text on the
display immediately above it.
Numeric Keys
These keys are used mainly to dial in
standby mode and enter numbers or
characters in editing mode. When you
press these keys for a long time.
Navigation Keys
Use to scroll through menus and move
the cursor. You can also use these keys
for quick access to the following
functions.
• Used to call your voicemail box by
.
• Up navigation key (
A shortcut key to the Favorites menu.
• Down navigation key ( ) :
A shortcut key to the Phonebook.
) :
• Used to call for international call by
.
• Used to call Speed dials by from
to
.
• Left navigation key (
Profiles menu.
):
END/PWR Key
Used to end or reject a call. This key is
also used as Power Key by pressing
this key for a few seconds.
• Right navigation key ( ) :
(Short press) Accesses the Write text
message menu.
(Long press) Accesses the message
inbox.
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
12
Key Description
Key
Description
You can delete the characters, go back
to the menu. In addition, you can view
voice memo list when you press this
key shortly in standby mode. Long press
of this key in standby mode starts voice
memo recording.
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
13
Display Information
The table below describes various display indicators
or icons that appear on the phone’s display screen.
Icon/Indicator
Description
Indicates the Headset profile is activated.
Indicates the Car profile is activated.
Indicates a call is diverted.
On-Screen Icons
Icon/Indicator
Description
Indicates the strength of the network
signal.
Indicates a call is in progress.
Indicates that GPRS service is available.
Indicates that you are roaming on
another network.
Indicates the alarm has been set and is on.
Indicates the status of the battery charge.
Indicates the receipt of a message.
Indicates the receipt of a voice mail.
You have received a push message.
Indicates that Vibrate profile has been
set.
Indicates the General profile is activated.
Indicates the Loud profile is activated.
Indicates the Quiet profile is activated.
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
14
Installation
Follow the steps below to Remove the SIM card.
1. Remove the battery if attached.
2. Take out the SIM card from the slot.
Notice
1. Inserting the SIM Card
• Removing the battery from the phone whilst it is
switched on may cause it to malfunction.
• The metal contact of the SIM card can be easily
damaged by scratches. Pay special attention to
the SIM card when you handle and install. Follow
the instructions supplied with the SIM card.
Locate the SIM card socket in the back of the phone.
Follow the steps below to install the SIM card.
1. Remove the battery if attached.
3. Installing the Battery
2. Slide the SIM card into the slot, under the silvery
holders, with the golden connectors facing down.
2. Removing the SIM Card
1. Position the lugs on the bottom of the battery into the
retaining holder.
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
15
Installation
4. Charging the Battery
To connect the travel adapter to the phone, you must
have installed the battery.
2. Then push down the half of the battery into position.
1. With the arrow facing you as shown in the diagram
push the plug on the battery adapter into the socket
on the bottom of the phone until it clicks into place.
3. Lay the battery cover in place of the phone and slide
it until the latch clicks.
2. Connect the other end of the travel adapter to the
mains socket. Only use the LG approved charger
provided in the box.
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
16
Installation
Warning
Note
• Do not force the connector as this may damage
the phone and/or the travel adapter.
• Ensure the battery is fully charged before using
the phone.
• Do not remove your battery or the SIM card while
charging.
Note
• “Battery Charging” is displayed on the screen
after connecting the travel adapter. Only if the
battery is totally empty, Call indicator Light is on
without displaying “Battery Charging”.
• The moving bars of battery icon will stop after
charging is complete.
Note
If the battery does not charge,
• switch the phone off.
5. Disconnecting the charger
• ensure the battery is correctly fit.
Disconnect the travel adapter from the phone by
pressing its side buttons as shown in the diagram.
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
17
Turning your phone on and off
Turning your phone ON
1. Install a battery to the handset and connect the
phone to an external power source such as the
travel adapter, cigarette lighter adapter or hands-
free car kit. Or install a charged battery pack to the
handset.
2. Press
is turned on.
for a few seconds until the LCD screen
3. Depending on the status of the PIN code request
setting you may need to enter your PIN code.
Turning your phone OFF
1. Press
is turned off.
for a few seconds until the LCD screen
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
18
Access codes
You can use the access codes described in this
section to avoid unauthorised use of your phone. The
access codes (except PUK and PUK2 codes) can be
changed by using the Change codes feature
[Menu-4-4-6]. See page 52.
network operator for the code. If you lose the code,
also contact your network operator.
PUK2 code (4 to 8 digits)
The PUK2 code, supplied with some SIM cards, is
required to change a blocked PIN2 code. If you lose
the code, also contact your network operator.
PIN code (4 to 8 digits)
The PIN (Personal Identification Number) code
Security code (4 to 8 digits)
protects your SIM card against unauthorised use. The
PIN code is usually supplied with the SIM card. When
the PIN code request is set to On, your phone will
request the PIN code every time the phone is switched
on. When the PIN code request is set to Off, your phone
connects to the network directly without the PIN code.
The security code protects the unauthorised use of
your phone. The default security code is set to ‘0000’
and the security code is required to delete all phone
entries and to activate the Reset Settings menu. Also,
the security code is required to enable or disable the
phone lock function to prevent unauthorised use of the
phone. The security code default setting can be
modified from the Security Settings menu.
PIN2 code (4 to 8 digits)
The PIN2 code, supplied with some SIM cards, is
required to access functions such as Advice of Call
Charge and Fixed Dial Number. These functions are
only available if supported by your SIM card.
Network password
The Network password is required when you use the
Call Barring function. You obtain the password from
your network operator when you subscribe to this
function. See page 50 for further details.
PUK code (4 to 8 digits)
The PUK (PIN Unblocking Key) code is required to
change a blocked PIN code. The PUK code may be
supplied with the SIM card. If not, contact your
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
19
General functions
2. Enter the country code, area code, and the phone
number.
Making and answering calls
Making a call
3. Press
.
1. Make sure your phone is switched on.
Ending a call
2. Enter a phone number, including the area code.
When you entered a wrong number, press the clear
When you have finished your call, press the end (
key.
)
key (
) to erase one digit at a time.
Making a call from the phonebook
Press and hold the clear key (
digits in succession.
) to erase the
You can save the names and phone numbers dialled
regularly in the SIM card and/or phone memory, which
is called phonebook.
3. Press the send key (
) to call the number.
4. To end the call, press the end key (
).
You can dial a number by simply looking up the desired
name in the phonebook. For further details on the
phonebook feature, please refer to page 55 through 58.
Making a call using the send key
1. In standby mode, press the send key (
the latest incoming, outgoing and
missed phone numbers will be displayed.
), and
Answering a call
When you receive a call, the phone rings. If the caller
can be identified, the caller’s phone number (or name
if saved in the phonebook) is displayed.
2. Select the desired number by using the up/down
navigation key.
3. Press
.
1. To answer an incoming call, press the send key.
Alternatively, please see page 48 for other answer
modes.
Making an international call
1. Press and hold the
key for the international
prefix. The ‘+’ character automatically selects the
international access code.
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
20
General functions
greeting or scheduling events in the calendar all
require entering text.
Note
• If Press any key has been set as the answer
mode (see page 48), any key press will answer a
The following text input methods are available in the
phone.
call except for the
or the right soft key.
T9 mode
] You can answer a call while using the
This mode lets you enter words with only one
keystroke per letter. Each key on the keypad has
more than one letter. The T9 mode automatically
compares your keystrokes with an internal
dictionary to determine the correct word, thus
requiring far fewer keystrokes than the traditional
ABC mode. This is sometimes known as predictive
text.
phonebook or other menu features.
2. To end the call, press the
key.
Switching quickly to Vibrate only mode
You can switch your phone quickly to the Vibrate only
mode by pressing and holding down the left navigation
key (
). To go back to the previous profile, press
and hold down the left navigation key (
) again.
ABC mode
This mode lets you enter letters by pressing the key
labelled with the required letter once, twice, three
or four times until the letter is displayed.
Signal strength
You can check the strength of your signal by the signal
indicator ( ) on the LCD screen of your phone.
123 mode (Number mode)
Signal strength can vary, particularly inside buildings.
Moving near to a window may improve reception.
Type numbers using one keystroke per number. To
change to 123 mode in a text entry field, press the
key until 123 mode is displayed.
Entering text
You can enter alphanumeric characters by using the
phone’s keypad. For example, storing names in the
Phonebook, writing a message, creating a personal
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
21
General functions
1. When you are in the T9 predictive text input mode,
Changing the text input mode
start entering a word by pressing keys
. Press one key per letter.
to
1. When you are in a field that allows characters to be
entered, you will notice the text input mode indicator
in the upper right corner of the LCD screen.
- The word changes as letters are typed. Ignore
what’s on the screen until the word is typed
completely.
- You can select the language of the T9 mode. Press
the left soft key [Options], then select T9 languages.
You can also go to T9 languages menu by holding
- If the word is still incorrect after typing completely,
press the up/down navigation key once or more to
cycle through the other word options.
down the
key. Select the desired language of
T9 mode. You can also turn off the T9 mode by
selecting T9 off. The default setting on the phone is
T9 enabled mode.
Example: Press
to type Good
Press
[Down
navigation key] to type Home
Text input
mode
2. Change the text input mode by
pressing . You can check
the current text input mode in
the upper right corner of the
LCD screen.
- If the desired word is missing from the word choice
list, add it using the ABC mode.
2. Enter the whole word before editing or deleting any
keystrokes.
3. Complete each word with a space by pressing the
] Using the T9 mode
key. To delete letters, press the
key.
The T9 predictive text input mode lets you enter words
easily with a minimum number of key presses. As you
press each key, the phone begins to display the
characters that it thinks you are typing based on the
built-in dictionary. You can also add new words in the
dictionary. As new words are added, the word changes
to reflect the most likely candidate from the dictionary.
To delete letters, press the
key. Press and hold
down the
key to erase entire words in succession.
Notice
• To exit from the text input mode without saving
your input, press
standby mode.
. The phone goes back to
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
22
General functions
] Using the ABC mode
Notice
• Refer to the table below for more information on
the characters available using the alphanumeric
keys.
Use the
to
keys to enter your text.
1. Press the key labelled with the required letter:
- Once for the first letter
Characters in the order display
- Twice for the second letter
- And so on
Key
Upper case
. , / ? ! - : ' '' 1
Lower case
. , / ? ! - : ' '' 1
2. To insert a space, press the
key once. To
delete letters, press the
key. Press and hold
A B C 2 Ä À Á Â Ã Å Æ Ç a b c 2 ä à á â ã å æ ç
D E F 3 Ë È É Ê d e f 3 ë è é ê
down the
key to erase the entire words in
succession.
G H I 4 Ï Ì Í Î
J K L 5
˝
g h i 4 ï ì í î
j k l 5
©
M N O 6 Ñ Ö Ø Ò Ó Ô Õ Œ m n o 6 ñ ö ø ò ó ô õ œ
P Q R S 7 ß p q r s 7 ß
Í
ß
T U V 8 Ü Ù Ú Û
W X Y Z 9
t u v 8 ü ù ú û
w x y z 9
Space key, 0
Space key, 0
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
23
General functions
Using the 123(Number) mode
standby mode, and the options are described below.
Making a second call
The 123 mode enables you to enter numbers in a text
message (a telephone number, for example).
Press the keys corresponding to the required digits
before manually switching back to the appropriate text
entry mode.
You can get a number you wish to dial from the
phonebook to make a second call. Press the right soft
key then select Search. To save the dialled number
into the phonebook during a call, press the right soft
key then select Add new.
Phonebook
Switching between two calls
You can save phone numbers and their corresponding
names in the memory of your SIM card.
To switch between two calls, press the left soft key
[Options], then select Swap or just press the
You can select one of two calls using
key.
In addition, you can save up to 200 numbers and
names in the phone memory.
up/down navigation keys. To end a call, highlight the
phone number using up/down navigation keys then
The SIM card and phone are both used in the same
way in the Phonebook menu.
press the
key.
Answering an incoming call
(Refer to page 55 through 58 for details.)
To answer an incoming call when the handset is
In call menu
ringing, simply press the
key. The handset is also
able to warn you of an incoming call while you are
already on a call. A tone sounds in the earpiece, and
the display will show that a second call is waiting. This
feature, known as Call waiting, is only available if your
network supports it. For details of how to activate and
deactivate it see Call waiting on page 48.
Your phone provides a number of control functions that
you can use during a call. To access these functions
during a call, press the left soft key [Options].
During a call
The menu displayed on the handset screen during a call
is different to the default main menu displayed when in
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
24
General functions
If Call waiting is activated, you can put the first call on
Multiparty or conference calls
hold and answer the second, by pressing
or by
The multiparty or conference service provides you
with the ability to have a simultaneous conversation
with more than one caller, if your network operator
supports this feature. A multiparty call can only be set
up when you have one active call and one call on hold,
both calls having been answered. Once a multiparty
call is set up, calls can be added, disconnected or
separated (that is, removed from the multiparty call but
still connected to you) by the person who set up the
multiparty call. These options are all available from the
In-Call menu. The maximum callers in a multiparty call
are five. Once started, you are in control of the
multiparty call, and only you can add callers to the
multiparty call.
selecting left soft key, then Hold & Answer. You can
end the current call and answer the waiting call by
selecting left soft key and then End & Answer.
Rejecting an incoming call
You can reject an incoming call without answering by
simply pressing the
key.
During a call, you can reject an incoming call by
pressing the left soft key [Menu] and selecting the
Multiparty/Reject or by pressing the
key.
Muting the microphone
You can mute the microphone during a call by pressing
the left soft key [Options], then selecting Mute. When
the handset is muted, the caller cannot hear you, but
you can still hear them. The handset can be unmuted
by pressing the [Unmute].
Making a second call
You can make a second call while currently on a call.
Enter the phone number and press the
key. When
Switching DTMF tones on during a call
the second call is connected, the first call is
automatically placed on hold. You can swap between
two calls by pressing the left soft key then selecting
Swap.
To turn DTMF tones on during a call, press the left soft
key, and then select DTMF on. DTMF tones can be
turned off the same way. DTMF tones allow your
phone to make use of an automated switchboard.
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
25
General functions
Setting up a multiparty call
Having a private call during a multiparty call
To have a private call with one caller from a multiparty
call, display the number of the caller you wish to talk to
on the screen, then press the left soft key. Select
Multiparty/Private to put all the other callers on hold.
Place one call on hold and while the active call is on,
press the leftsoft key and then select Multiparty/Join
all.
Putting a multiparty call on hold
Ending a multiparty call
Press the left soft key, then select Multiparty/Hold all.
Activate the multiparty call on hold
The currently displayed caller from a multiparty call
can be disconnected by pressing the
key. To end
Press the left soft key, then select Multiparty/Join all.
Adding calls to the multiparty call
a multiparty call, press the left soft key, then select
Multiparty/End multiparty. After pressing the left soft
key, selecting Multiparty/End all will end all the active
and on-hold calls.
To add a call to an existing multiparty call, press the
left soft key, then select Multiparty/Join all.
Putting a member of a multiparty call on hold
To place one selected caller (whose number is
currently displayed on the screen) of a multiparty call
on hold, press the left soft key, then select
Multiparty/Exclude.
Displaying callers in a multiparty call
Using up/down navigation keys, you can scroll through
the phone numbers of the callers in a multiparty call.
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
26
Menu Tree
1 Messages
3 Profiles
General
Loud
1 Write text message
2 Write multimedia message
3 Inbox
Headset
Car
4 Outbox
5 Drafts
Vibrate only
Quiet
6 Listen to voice mail
7 Info message
8 Templates
9 Settings
4 Settings
1 Date & Time
2 Phone settings
3 Call settings
2 Call register
1 Missed calls
4 Security settings
5 Network settings
6 GPRS setting
7 Reset settings
2 Received calls
3 Dialled calls
4 Delete recent calls
5 Call charges
6 GPRS information
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
27
Menu Tree
5 Organiser
1 Alarm clock
2 Scheduler
3 Phonebook
7 Internet
1 Home
2 Bookmarks
3 Profiles
4 Go to URL
5 Cache settings
6 Cookies settings
7 Security certification
8 Reset profiles
9 Browser version
6 Tools
1 Favorites
2 Calculator
3 My folder
4 Unit converter
5 World time
6 Voice recorder
7 Memory status
8 Games
9 SIM Service
This menu depends on SIM and the network services.
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
28
Selecting functions and options
Your phone offers a range of functions that allow you
to customise it. These functions are arranged in menus
and sub-menus, accessed via the two soft keys
marked
and
. Each menu and sub-menu lets
you view and alter the settings of a particular function.
The roles of the soft keys vary according to the current
context; the label on the bottom line of the screen just
above each key indicates its current function.
(e.g.)
Menu
Names
Press the right soft
key to activate the
corresponding action.
Press the left soft key
to access the
available menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
29
Messages [Menu-1]
Press the menu key ( ) and select Messages using
]Send: Enter the phone number. Or select the
number from the recent numbers or the Contacts
after pressing the left soft key [Options].
You can send a message up to 6 phone numbers
at a time. Before sending the message, you can
set the following options by pressing the right soft
key [Settings].
navigation keys.
Write text message [Menu-1-1]
Your phone receives voice mail notification messages,
and Short Message Service (SMS) messages. Voice
mail and SMS are network services. Please contact
your network operator for more information.
1) Validity period: Set the length of time for which
your text messages will be saved at the SMS
center while attempts are made to deliver them
to the recipient. Possible values are 1 hour, 12
hours, 1 day, 1 week and the maximum
When the
mail. When the
icon appears, you have received voice
icon appears, you have received
a new text message. If the message memory is full, a
message is displayed, the icon flashes and you
authorized by your network operator.
cannot receive any new messages. Use the Delete
option in the Inbox menu to delete obsolete messages.
Once there is space in the message memory, any
undelivered SMS messages will be received (provided
sufficient space is available).
2) Delivery report: Select whether activate or
deactivate the report function. When this
function is activated, the network informs you
whether your message has been delivered or
not.
1. Key in your message. For details on how to enter
text, refer to pages 21 through 24 (Entering Text).
3) Reply charging: Allows the recipients of your
text message to send you a reply via your
message centre, if the service is provided by
the network.
2. After you complete the message, to select the
required option, press the left soft key [Options]. The
following options are available.
]Save: Saves the message so that it can be sent
later.
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
30
Messages [Menu-1]
]Font: Select the desired font size and style for the
message using the left/right navigation keys.
and they can be replaced with new ones received
from other sources.
]Colour: Select the desired foreground colour
using the left/right navigation key. Then, press the
down navigation key and select the background
colour using the left/right navigation key.
]Sound: If available, you can attach a sound to a
short message.
]Text templates: You can select a text template
already set in the phone.
]Alignment: Select where to align text.
]Phonebook: You can add phone numbers to the
]Add T9 dictionary: When you didn't find a desired
word in the T9 text input mode, you can add a
word using this option in the T9 dictionary. After
typing a word, press the left soft key [Save].
message.
]Signature: You can attach your name card.
Write multimedia messages [Menu-1-2]
]T9 languages: Select the language for T9 input
mode. You can also deactivate T9 input mode by
selecting T9 off. For further details on the T9
mode, refer to page 21 through 22.
A multimedia message can contain text, images,
and/or sound clips. This feature can be used only if it is
supported by your network operator or service
provider. Only the devices that offer compatible
multimedia message or e-mail features can receive
and send multimedia messages.
]Exit: Exits from the Write text message menu.
3. You can also send attachments with the message by
pressing the right soft key [Insert], while you’re
entering a message.
You can create a multimedia message up to 10 slides.
(approximately 100 KB)
1. After entering the subject of the message, press
]Symbol: You can attach special characters.
key.
]Picture: Sends and receives text messages that
contain pictures, known as ‘picture messages’.
Several preset pictures are available in the phone
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
31
Messages [Menu-1]
2. Key in the text message. Using the right soft key
[Insert], you can insert a symbol, a picture, a sound,
a voice memo, text templates, phone numbers stored
in the phonebook or a signature.
3) Press the left soft key [Send].
]Preview: Select this option to check out the
multimedia message you've created. Each slide is
sequentially played back automatically. You can
also move to another slide from the currently
played slide using the left/right navigation keys. To
replay the message, press the left soft key [Replay].
3. Press the left soft key [Options]. The following
options are available.
]Send: You can send the multimedia message up to
6 recipients at the same time.
]Save: Saves the message in drafts or as a
template.
1) Key in the phone number. You can also search
the phone number from the recent number list
or the phonebook using the left soft key
[Options].
]Add slide: Add a slide before or after the current
slide.
]Move to slide: Select this option to move to
2) Press the right soft key [Settings]. You can set
the following options:
another slide from the current slide.
]Delete slide: Deletes the current slide.
- Priority: Set the priority of the MMS.
]Set slide format: You can set the following slide
- Validity period: Set the duration for keeping
the multimedia messages on the network
server. Possible values are 1 hour, 12 hours, 1
day, 1 week and the maximum authorized by
the network operator.
format.
- Set timer
Enter the timer in each field using the numeric
keypad.
]Add T9 dictionary: When you didn’t find a desired
word in the T9 text input mode, you can add a
word in the T9 dictionary using this option. After
typing a word, press the left soft key [Save].
- Delivery report: Select Yes to activate the
report function. When this function is activated,
the network informs you whether or not your
message has been delivered.
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
32
Messages [Menu-1]
]T9 languages: Select the T9 language for T9 input
mode. You can also deactivate the T9 input mode by
selecting T9 off. For further details on the T9 mode,
refer to page 21 through 22.
]View: You can view the selected message.
]Reply: You can reply to the sender with a text
message or a multimedia message.
]Forward: You can forward the selected message
to other recipients.
]Exit: Exits from the Write multimedia message
menu.
]Return call: You can call back to the sender.
Inbox [Menu-1-3 ]
]Delete: Deletes the selected message from inbox.
You will be alerted when you have received messages.
And they will be stored in the Inbox.
Press the left soft key [Menu] and select Messages →
Inbox. Or, you can take a shortcut by pressing the right
navigation key ( ) in standby mode.
]Extract: You can extract picture, sound, sender’s
number, URL, email address and so on from the
message. They will be saved in My folder,
Phonebook, or Bookmarks.
]View information: You can view the information of
the message:
In the Inbox, you can identify each message by icons.
For detail, see the icon description below.
the sender's address, subject (only for multimedia
message), the date and time when the message
has arrived, message type and size, and the
priority (only for multimedia message).
Icon
Description
Multimedia message
Short message
SIM message
]Replay: You can replay the selected multimedia
message. (Only for multimedia message)
Read
Notified multimedia message
]Delete all: Deletes all the messages in the inbox
folder.
Each received message has the following options
available. Press the left soft key [Options].
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
33
Messages [Menu-1 ]
]Receive: When you receive a multimedia
notification message, you need to select this
option to download the multimedia message. (Only
for multimedia notification message)
The messages of which transmission was
completed has the following options.
]View: You can view the selected message.
]Forward: You can forward the selected message to
other recipients.
]Cancel: You can cancel downloading the
multimedia message. (Only for multimedia
notification message)
]Delete: Deletes the selected message from outbox.
]View information: You can view the information of
selected message: subject (only for multimedia
message), the date and time when you sent it,
message type and size, the priority (only for
multimedia message), and recipients.
Outbox [Menu-1-4 ]
All the messages you have sent are stored in the
Outbox folder. You can view the list and contents of
messages. In the outbox message list, you can verify if
the transmission was successful. If the transmission
was failed, “(Failed)” is displayed before the recipient.
You can also check whether you have received the
delivery report through the following icons.
]Delete all: Deletes all the messages in the outbox
folder.
The messages of which transmission is in
progress has the following options.
Icon
Description
Sent
]View: You can view the selected message.
]Send: Select this to send it again.
Failed
]Cancel: Cancels transmitting of the message.
Delivery confirmed
SMS sent
]Delete: Cancels transmitting the message and
deletes the message.
In each message, the following options are available by
pressing the left soft key [Options].
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
34
Messages [Menu-1 ]
]View information: You can view the information of
selected message: subject (only for multimedia
message), the date and time when you sent it,
message type and size, the priority (only for
multimedia message), and recipients.
]View: You can view the selected message.
]Edit: You can edit the selected message.
]Send: Sends the message.
]Delete: Deletes the selected message from the
drafts folder.
]Send all: Sends all the messages of which
transmission is in progress again.
]View information: You can view the information of
selected message: subject (only for multimedia
message), the date and time when saved, message
type and size and the priority (only for multimedia
message).
]Cancel all: Cancels all the message transmission.
]Delete all: Cancels all the message transmission
and deletes all of them.
]Delete all: Deletes all the messages from drafts
folder.
Drafts [Menu-1-5 ]
You can view the messages saved as a draft. The draft
messages are listed with the date and time when they
were saved. Scroll through the list using up/down
navigation keys.
Listen to voice mail [Menu-1-6 ]
This menu provides you with a quick way of accessing
your voice mailbox (if provided by your network).
Before using this feature, you must enter the voice
centre number obtained from your network operator.
Icon
Description
Multimedia message
Text message
When new voice message is received, the
symbol will be displayed on the screen. Please check
with your network provider for details of their service
in order to configure the handset correctly.
Each draft has the following options. Press the left soft
key [Options].
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
35
Messages [Menu-1 ]
• View list
Info message (Network dependent) [Menu-1-7 ]
You can view the list of all the info service message
numbers. Press the left soft key [Options] to edit or
delete the info message category.
Info service messages are text messages sent by the
network to mobile phone users. They provide general
information such as weather reports or traffic
conditions. Each type of information has the number;
therefore, you can contact the service provider as long
as you have input the certain number for the
information. When you receive an info service
message, a popup message will indicate a new
message receipt or the info service message will be
displayed directly. The following options are available
when viewing info service messages.
• Active list
You can set whether you will receive each info
service message or not using the left soft key
[On/Off] in this list.
Templates [Menu-1-8 ]
There are pre-defined messages in the list. You can
view and edit the template messages or create new
messages. Two types of templates are available: Text
and Multimedia.
Read [Menu-1-7-1 ]
1. Select Read to view the message, it will be displayed
on the screen.
Text templates [Menu-1-8-1 ]
• Please call me back.
• I’m late. I will be there at...
• Where are you now?
• I am on the way.
2. The message will be shown until another message is
reached.
Topics (Network dependent) [Menu-1-7-2 ]
• Add new
You can add a new info service message number
with its nickname in the phone or in the SIM (if the
SIM is available).
• Top urgent. Please contact.
• I love you.
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
36
Messages [Menu-1 ]
The following options are available.
]Add new: Allows you to add a new multimedia
template.
]View: You can view the selected template.
]Write messages: You can write a multimedia
message with the multimedia template.
]Edit: Use this to write a new message or edit the
selected template message from the text template
list.
]Delete: Deletes the selected template message from
the multimedia template list.
]Write messages
]Delete all: Clears the multimedia template list.
- Write text message: Use this to send the selected
template message by SMS.
Signature [Menu-1-8-3 ]
- Write multimedia message: Use this to send the
selected template message by MMS.
This option helps you to make your own name card.
Key in the name, mobile phone number, home number,
office number, Fax number, and E-mail address. After
creating the name card, you can access the following
options using the left soft key [Options].
]Add new: Use this to create new template.
]Delete: Deletes the selected template.
]Delete all: Deletes all the text templates.
]Edit: You can edit the name card.
Multimedia templates [Menu-1-8-2 ]
]Write messages
You can create a multimedia template after pressing
the left soft key [Add new]. And the multimedia
templates you saved as a template while creating a
multimedia message in the Write multimedia message
(See page 31).
- Write text message: Use this to send the name card
by SMS.
- Write multimedia message: Use this to send the
name card by MMS.
]Delete: Deletes the name card.
]View: You can view the multimedia template.
]Edit: You can edit the multimedia template.
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
37
Messages [Menu-1 ]
]SMS centre: Saves or changes the number of your
SMS centre when sending text messages. You must
obtain this number from your service provider.
Settings [Menu-1-9 ]
Text message [Menu-1-9-1 ]
Multimedia message [Menu-1-9-2 ]
This menu lets you set up default SMS information.
Via this menu, you can set up the default multimedia
message information.
The following options are available.
]Message types: Set the default message type (Text,
Voice, Fax, Natl. paging, X.400, E-mail, ERMES). The
network can convert the messages into the selected
format.
]Priority: Set the priority for the multimedia messages
you will send.
]Validity period: Set the length of time for which your
text messages will be saved at the SMS center while
attempts are made to deliver them to the recipient.
Possible values are 1 hour, 12 hours, 1 day, 1 week and
the maximum authorised by your network operator.
]Validity period: Set the length of time for which your
multimedia messages will be saved in the network
server while attempts are made to deliver them to
the recipient. Possible values are 1 hour, 12 hours, 1
day, 1 week and the maximum authorised by your
network operator.
]Delivery report: Select whether to activate or
deactivate the report function. When this function is
activated, the network informs you whether or not
your message has been delivered.
]Delivery report: Select whether to activate or
deactivate the report function. When this function is
activated, the network informs you whether or not
your message has been delivered.
]Reply via same service centre: Allows the recipient
of your SMS message to send you a reply via your
message centre, if the service is provided by the
network.
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
38
Messages [Menu-1 ]
]Auto download
Info message [Menu-1-9-4 ]
On: If you select this, messages are downloaded
Info service messages are text messages delivered by
the network to GSM. They provide general information
such as weather reports, traffic news, taxis,
automatically on receipt.
Off: Requires you to confirm you want to download
pharmacies, and stock prices. Each type of information
has the number; therefore, you can contact service
provider as long as you have input the certain number
for the information. When you have received an info
service message, you can see the popup message to
show you that you have received a message or the info
service message is directly displayed. The following
options are available.
the message.
Home network only: If you select this, messages are
downloaded automatically on receipt in your home
network area. And outside your home service area,
it requires you to confirm you to download the
message.
]Network settings: If you select the multimedia
message server, you can set the URL for multimedia
message server.
]Receive: If you select YES, your phone will receive
Info service messages. Otherwise, it will not receive
Info service messages any more.
]Permitted types: Set the permitted type. Possible
values are Personal, Advertisements and
Information.
]Alert: If you select YES, Your phone will beep when
you have received Info service message numbers.
Otherwise, it will not beep even though you have
received info service messages.
Voice mail centre [Menu-1-9-3 ]
You can check the voice mail centre address.
]Languages: You can select the language you want
by pressing [On/Off]. Then, the info service message
will be shown in the language that you selected.
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
39
Messages [Menu-1 ]
Push messages [Menu-1-9-5 ]
Icon
Description
You can order push messages from WAP service
providers. Push messages are notifications of, for
example, news headlines and they can contain a text
message or the address of a WAP service. For
availability and subscription, contact your WAP
service provider.
Read Push Message
Unread Push Message
After selecting a push message, the following menus
are available.
Note
• Information: Shows the information of the current
• Service providers can update an existing push
message with a new incoming push message.
(Old one will be replaced with new one.)
push message.
• Load: Connects to a specific site using the
information in the current push message.
• When push messages expire, they are deleted
automatically.
• Delete: Deletes the current push message.
• Delete All: Deletes all the messages in inbox
(including SMS, MMS, etc.).
In this menu, you can set the push message receive
option.
]Receive on: If you select this, all push messages will
be accepted irrespective of the origination.
]Receive off: Will not accept any push message.
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
40
Call register [Menu-2 ]
You can check the record of missed, received, and
dialled calls only if the network supports Calling Line
Identification (CLI) within the service area.
• View the date and time at which the call was made.
• Save the number in the phonebook. Enter a name for
the number and save it in the phonebook.
The number and name (if available) are displayed
together. You can also view call times and costs.
• Send a message to this number.
• Delete the call from the list.
Press the menu key ( ) and select Call register
using navigation keys.
Note
• You can delete all the call records from the list
using the Delete recent calls menu. (See page 42.)
Missed calls [Menu-2-1 ]
This option lets you view unanswered calls. After
pressing the left soft key [Options], you can also:
Dialled calls [Menu-2-3 ]
• View the date and time at which the call was made.
This option lets you view outgoing calls (called or
attempted). Using the [Options] key, you can also:
• Save the number in the phonebook. Enter a name for
the number and save it in the phonebook.
• View the date and time at which the call was made.
• Send a message to this number.
• Delete the call from the list.
• Save the number in the phonebook. Enter a name for
the number and save it in the phonebook.
• Send a message to this number.
• Delete the call from the list.
Note
• You can delete all the call records from the list
using the Delete recent calls menu. (See page 42.)
Note
• You can delete all the call records from the list
using the Delete recent calls menu. (See page 42.)
Received calls [Menu-2-2 ]
This option lets you view incoming calls. After pressing
the left soft key [Options], you can also:
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
41
Call register [Menu-2 ]
Call costs [Menu-2-5-2]
Delete recent calls [Menu-2-4 ]
This network service allows you to check the last call
cost, the total call cost and the remaining call cost.
The call cost is displayed on the bottom of the LCD
screen. To reset the call cost, select Reset all. You are
requested to enter the PIN2 code.
Use this to delete the missed call list, received call list,
or dialled call list. You can also delete all call lists at a
time selecting All calls.
Call charges [Menu-2-5 ]
Call duration [Menu-2-5-1 ]
Note
• The actual cost invoiced for calls by your service
provider may vary, depending on network
features, rounding-off for billing, taxes, etc.
Use this to view the duration of your incoming and
outgoing calls. You can check each call duration at the
bottom of screen while scrolling using the up/down
navigation keys. You can reset the call timer by
selecting Reset all.
Settings [Menu-2-5-3]
• Set tariff
• Last call: Length of the last call.
Set tariff: You can set the currency type and the unit
price. Contact your service provider to obtain
• All calls: Total length of all calls made or received
calls since the timer was last reset.
charging unit prices. To select the currency or unit in
this menu, you need the PIN2 code. If you want to
input @, £, $ symbol, clear all currency strings and
• Received calls: Length of the incoming calls.
• Dialled calls: Length of the outgoing calls.
• Reset all: Select this to reset all the call duration.
then press
key. If you want to change the
key again.
symbol, press
Note
• The actual time invoiced for calls by your service
provider may vary, depending on network
features, rounding-off for billing, etc.
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
42
Call register [Menu-2 ]
Note
Call duration [Menu-2-6-1]
• When all units have been used, no calls can be
made except emergency calls. Depending on
the SIM card, you need the PIN2 code to set a
call cost limit.
You can check the duration of the last call and all calls.
You can also reset the call timers by selecting Reset
all.
Data volumes [Menu-2-6-2]
You can check the sent data volume, received data
volume, and all data volume. You can also reset the
counter by selecting Reset all.
• Set credit
This network service allows you to limit the cost of
your calls to the selected charging units. You can
make or receive a call up to the specified cost limit.
Read: You can check the remaining units.
Change: You can change your charging limit.
• Auto display
This network service allows you to see automatically
the cost of your last call. If you select On, you can
see the cost of the last call when the call is released.
GPRS information [Menu-2-6]
You can check the amount of data transferred over the
network through the GPRS information option. In
addition, you can also view how much time you are
online. (GPRS stands for General Packet Radio
Service.)
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
43
Profiles [Menu-3 ]
In Profiles, you can adjust and customise the phone
tones for different events, environments. There are six
preset profiles: General, Loud, Headset, Car, Vibrate
Only and Quiet. Each profile can be personalised.
4. Message alert type: Select the alert type for
receiving a message.
5. Message tone: Select the alert tone for receiving a
message.
Press the menu key (
navigation keys.
) and select Profiles using
6. Keypad volume: Set the volume of keypad tone.
7. Keypad tone: Select the desired keypad tone.
8. Effect sound volume: Set the volume of effect sound.
Changing the profile [Menu-3-x-1]
1. A list of profiles is displayed.
9. Power on/off volume: Set the volume of the ringing
tone when switching the phone on/off.
2. In the Profile list, scroll to the profile you want to
activate and press the left soft key [Select].
0. Auto answer: (only in Headset profile and Car
profile) You can activate the automatic answer
feature. Select when the phone answers
automatically.
3. Then, select Activate.
Customising profiles - Personalise [Menu-3-x-2]
Off: Deactivates the Auto answer feature.
Scroll to the desired profile in the Profile list and select
Personalise. The profile setting option opens. Set the
option as required.
After 5 secs: After 5 seconds, the phone will
answer automatically.
After 10 secs: After 10 seconds, the phone will
1. Call alert type: Set the alert type for incoming calls.
answer automatically.
2. Ring tone: Select the desired ring tone from the list.
Scroll through the list using up/down navigation
keys. You can hear the desired tone prior to making
a selection.
3. Ring volume: Set the volume of the ringing tone.
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
44
Profiles [Menu-3 ]
Customising profiles - Rename [Menu-3-x-3]
You can rename a profile and give it any name you
want. Vibrate only, Headset and Car profiles cannot be
renamed.
1. To change the name of a profile, scroll to the profile
in the profile list and select Rename.
2. Key in the desired name and press the left soft key
[OK].
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
45
Settings [Menu-4 ]
Press the menu key (
the navigation keys.
) and select Settings using
Phone settings [Menu-4-2]
Many features of your phone can be customised to suit
your preferences. All of these features are accessed
via the Phone settings menu.
Date & Time [Menu-4-1]
This option lets you change the current time and date
displayed.
Wallpaper [Menu-4-2-1]
The following options are available.
Use this to set up the display on the LCD screen in
standby mode.
Set date [Menu-4-1-1]
Greeting note [Menu-4-2-2]
Use this to enter the day, month and year. You can
change the date format via the Date format menu
option.
If you select On, you can edit the text which will be
displayed in standby mode
Date format [Menu-4-1-2]
DD/MM/YYYY (day/month/year)
MM/DD/YYYY (month/day/year)
YYYY/MM/DD (year/month/day)
Language [Menu-4-2-3]
You can select the display language. When the
language option is set to Automatic, the language is
automatically selected according to the language of
the SIM card used. English will be set if the language
on the SIM card is not supported by the phone.
Set time [Menu-4-1-3]
Use this to enter the current time. You can choose the
time format via the Time format menu option.
Backlight [Menu-4-2-4]
Use this to select whether or not the phone uses the
backlight. A small increase in standby/talk time can be
achieved by turning the backlight off.
Time format [Menu-4-1-4]
24-hour
12-hour
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
46
Settings [Menu-4 ]
• All voice calls
LCD contrast [Menu-4-2-5]
Diverts all voice calls unconditionally.
Adjust the LCD contrast with
,
.
• If busy
Information window [Menu-4-2-6]
Diverts voice calls when the phone is in use.
You can preview the current state of the selected
menu before opening the menu. The state is shown on
the bottom of the screen.
• If no reply
Diverts voice calls which you do not answer.
• If out of reach
Menu colour [Menu-4-2-7]
Diverts voice calls when the phone is switched off or
out of coverage.
Your phone provides you with 4 menu colour themes.
Set the menu colour by scrolling and pressing the left
soft key [Select].
• All data calls
Diverts to a number with a PC connection
unconditionally.
Call settings [Menu-4-3]
To change the settings for call diverting.
Call divert [Menu-4-3-1]
• All fax calls
Diverts to a number with a fax connection
unconditionally.
When this network service is activated, you can direct
your incoming calls to another number, for example, to
your voice mailbox number. For details, contact your
network operator. Select one of the divert options, for
example, select If busy to divert voice calls when your
number is busy or when you reject incoming calls.
Each option has the following menu:
- Activate
Activates the corresponding service.
To voice mail centre: Forwards to message centre.
This function does not apply to All data calls and All
fax calls menus.
The following options are available.
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
47
Settings [Menu-4 ]
To other number: Input the number for call
diverting.
Send my number [Menu-4-3-3]
This network service lets you decide whether your
phone number is displayed (On) or hidden (Off) from
the person you are calling. Select Set by network to
reset the phone to the setting that you have agreed
upon with your service provider.
To favourite number: After entering up to 5
frequently used phone numbers, you can divert
calls to them.
- Cancel
Call waiting [Menu-4-3-4]
(Network Service)
Cancels the selected call divert.
- View status
The network will notify you of a new incoming call
while you have a call in progress. Select Activate to
request the network to activate call waiting, Cancel to
request the network to deactivate call waiting, or View
status, to check if the function is active or not.
You can check the status of the service.
• Cancel all: Cancels all call divert settings.
Answer mode [Menu-4-3-2]
Select the desired mode to answer a call.
• Press any key
Minute minder [Menu-4-3-5]
When set to On, the phone will beep every minute
during an outgoing call to keep you informed of the
length of the call.
When the phone rings, you can answer a call by
pressing any key except the
soft key ( ).
key and the right
Auto redial [Menu-4-3-6]
• Send only
Select On, and your phone will make a maximum of
four attempts to connect the call after an unsuccessful
call attempt.
You can answer a call only by pressing the send key.
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
48
Settings [Menu-4 ]
Delete
: Delets the selected CUG.
Select line (SIM dependent) [Menu-4-3-7]
Delete all : Delets all CUG.
This menu is shown only if the SIM supports two
subscriber numbers, that is, two phone lines. Select
which phone line (between Line 1 and Line 2) you want
to use for making calls and sending short messages.
Calls on both lines can be answered irrespective of the
selected line.
Security settings [Menu-4-4]
Various passwords are used to protect certain
features of your phone. Refer to page 19 for the various
passwords.
Note
You will not be able to make calls if you select Line
2 and have not subscribed to this network service.
PIN code request [Menu-4-4-1]
When the PIN code request feature is enabled, you
must enter your PIN each time you switch the phone
on. Consequently, any person who does not have your
PIN cannot use your phone without your approval.
Closed user group [Menu-4-3-8]
(Network dependent)
Restricts usage of the phone with numbers that belong
to certain user groups. When this function is used,
every outgoing call is associated with a group index. If
a group index is specified, it is used for all outgoing
calls. If no group index is specified, the network will
use the preferential index (a specific index that is
stored in the network).
Note
• Before disabling the PIN code request feature, you
must enter your PIN.
The following options are available:
• On: You must enter the PIN each time the phone is
Default
: Activates the default group agreed on with
the network operator.
switched on.
Set
: Select this to activate the selected CUG
• Off: The phone connects directly to the network when
Index.
you switch it on.
Edit
: You can edit the CUG name and CUG
Index.
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
49
Settings [Menu-4 ]
Phone lock [Menu-4-4-2]
Note
• If you want to lock your phone keypad manually,
press then
• To unlock your phone keypad, press
key and then press key. If you enable
Automatic key lock, your phone keypad will lock
again automatically after 10 seconds.
When the Phone lock feature is enabled, the phone is
locked and you must enter the phone password each time
the phone is switched on.
.
[unlock]
The password is factory set to 0000. To change the phone
password, refer to the Change codes–Security code
menu option (Menu-4-4-6-3). Once the correct password
has been entered, you can use the phone until you switch
it off.
Call barring (Network dependent) [Menu-4-4-4]
The following options are available:
Call barring lets you restrict the making and receiving
of calls with your phone. For this function, you need
the Network password, which you can obtain from
your service provider.
• On
You are required to enter the phone password when
you switch the phone on.
• Off
The following options are available:
• All outgoing
The phone connects directly to the network when
you switch it on.
No call can be made.
• Automatic
• Outgoing international
Your phone will request security code only when you
change your SIM card.
International calls cannot be made.
• Outgoing international except home country
Automatic key lock [Menu-4-4-3]
When you enable Automatic key lock, keypad will be
locked automatically on an idle screen after 10
seconds without any key requesting.
When abroad, calls can be made only to numbers
within the current country and to your home country,
the country where your home network provider is
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
50
Settings [Menu-4 ]
located.
Fixed dial number (FDN) [Menu-4-4-5]
(SIM dependent)
• All incoming
Use this to restrict your outgoing calls to selected
phone numbers, if this function is supported by your
SIM card. The PIN2 code is required.
No call can be received.
• Incoming when abroad
Calls cannot be received when you are using your
phone outside your home service area.
The following options are available:
• Activate
• Cancel all
Use this to only call phone numbers saved in the
phonebook. You must enter your PIN2 code.
All call barring settings are deactivated; calls can be
made and received normally.
• Cancel
• Change password
Allows you to call any number.
• Number list
Use this to set and change the call barring password
obtained from your service provider using this option. You
must enter the current password before you can specify
a new one. Once you have entered a new password, you
are asked to confirm it by entering it again.
Use this to view the numbers saved as fixed dial
numbers.
Note
Note
• Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
• To use Call barring service, you must input the
network password. When calls are barred, calls
may be possible to certain emergency numbers
on some networks.
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
51
Settings [Menu-4 ]
Change codes [Menu-4-4-6]
Automatic [Menu-4-5-1]
The Change codes feature lets you change your current
password to a new one. You must enter the current
password before you can specify a new one.
Use this to set the phone to automatically search for
and select one of the cellular networks available in
your area. The phone will default back to Automatic if it
is switched off.
Use this to change the access codes: PIN code, PIN2
code, Security code
Manual [Menu-4-5-2]
Note
If you want to select the desired network manually
from a list of network. If the connection to the manually
selected network is lost, the phone will sound an error
tone and ask you to select a network again. The
selected network must have a roaming agreement with
your home network, that is, the operator whose SIM
card is in your phone. The phone will let you select
another network if the phone fails to access the
selected network. If you switch off the phone, the
phone will be reset to Automatic.
• PIN: Personal Identification Number
Network settings [Menu-4-5]
The Network settings feature enables you to indicate
whether the network used when roaming (outside your
home area) is selected Automatic, Manual or
Preferred.
Note
Preferred [Menu-4-5-3]
• You can select a network other than your home
network only if it has a valid roaming agreement
with your home network.
You can set a list of preferred networks the handset
should attempt to register with first, before attempting
to register to any other networks. This list is created
from the handset’s predefined list of known networks.
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
52
Settings [Menu-4 ]
GPRS setting [Menu-4-6]
Reset settings [Menu-4-7]
GPRS(General Packet Radio Service) is a technology that
allows mobile phones to be used for sending and
receiving data over the mobile network. GPRS is a data
bearer that enables wireless access to data network such
as the Internet.
You can reset your phone to its default configuration.
To do so, proceed, as follows.
1. Select the Reset settings menu option.
2. You are requested to enter the 4-digit security code.
Note
Before you can use GPRS technology
• The security code is preset to 0000. To change
this, refer to page 52.
- You need to subscribe to the GPRS service. For
availability and subscription to GPRS service, contact
your network operator or service provider.
- You need to save the GPRS settings for the applications
used over GPRS.
Power on [Menu-4-6-1]
If you select Power on and you are in a network that
supports GPRS, the phone registers to the GPRS
network and sending short messages will be done via
GPRS. Also, starting an active packet data connection,
for example, to send and receive e-mail, is quicker.
When needed [Menu-4-6-2]
If you select When needed, the phone will use a GPRS
connection only if you start an application or action
that needs it. The GPRS connection is closed after it is
no longer required by any application.
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
53
Organiser [Menu-5 ]
• To turn off the alarm, press the right soft key [Quit].
Press the menu key ( ) and select Organiser.
Scheduler [Menu-5-2]
Alarm clock [Menu-5-1]
When you enter this menu, a calendar appears. A
square cursor is located on the current date. You can
move the cursor to another date using navigation keys.
On the calendar, you can use the following keys.
There are 5 alarm clocks available. Set the alarm to
ring at a specific time.
After selecting an alarm clock using the left soft key
[Select],
skips back a year.
1.
Alarm on/off: Select On using the left/right
navigation key. To deactivate the alarm function,
select Off.
Each press of
skips forward a year.
skips back a month.
skips forward a month.
2.
3.
Alarm time: Enter the alarm time using the
numeric keys
Repeat: Select the desired one from Once,
Mon~Fri, Mon~Sat, and Everyday using the left/right
navigation key.
You can enter a schedule or memo in the scheduler by
pressing the left soft key [Options].
]Add new: Select this to enter a new schedule or a
memo. After a schedule note or memo is entered on
a date, the date is shown in a different colour and
4.
Alarm melody: Select the desired alarm melody
using the left/right navigation key.
5. Press the left soft key [OK].
“
” (schedule), “ ” (memo) appears on the right
bottom of the screen. This function reminds you of
your schedule. And the phone will sound an alarm
tone if you set the phone to do so.
6. You can edit the alarm clock name. After keying in
the name, press the left soft key [OK].
When the alarm time is reached, it sounds the alarm
melody.
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
54
Organiser [Menu-5 ]
]View: Shows the schedule note or memo for the
chosen day. Press the left soft key [Options] to edit
or delete the note you selected.
• You can access the phonebook directly by pressing
the down navigation key (
) in standby mode.
Note
]View all: Shows all the notes that are entered in the
phone. Use the up/down navigation keys to browse
through the note lists.
• You can also scroll through the phonebook from
the beginning, by pressing the left soft key [List]
directly.
]Delete past: Select this to delete the expired
schedule notes that have already been notified. You
are asked to confirm this action.
3. After finding the desired contact, you can make a
call to the number by pressing the key. Or press the
]Delete all: Select this to delete all the schedule
notes and memos. You are asked to confirm this
action.
left soft key
options.
[Option] to use the following
• Edit: You can edit the name and number.
Phonebook [Menu-5-3]
• Write messages
- Write text message: Use this to write a text
message to the contact.
You can save phone numbers and their corresponding
names in the memory of your SIM card. In addition,
you can save up to 200 numbers and names in the
phone memory.
- Write multimedia message: Use this to write a
multimedia message to the contact.
• Copy: Use this to copy the contact entry from SIM to
the phone memory or vice versa.
Search [Menu-5-3-1] (Calling from phonebook)
1. Select Search. You are asked to enter a name.
• Main number: Select which number will be the main
number. The main number will be displayed first
2. Enter the start of the name that you wish to find and
press left soft key [Search].
• Delete: Deletes the contact.
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
55
Organiser [Menu-5 ]
1. Select Caller groups. All group lists will be
displayed: Family, Friends, Colleague, VIP, Group 1,
Group 2, and Others.
Add new [Menu-5-3-2]
You can add a phonebook entry using this function.
There are 2 memories: Phone memory and SIM
memory. To select the memory, go to Set memory
[Menu-5-3-5-1]. The phone memory capacity is 200
entries. The SIM card memory capacity depends on
the SIM card.
2. Select the group name that you want to manage by
pressing the left soft key [Option]. The following
submenus will be displayed.
• Member list
Displays the member list in the group.
• Group ring tone
1. You can add new phonebook entries to the SIM
memory or the phone memory. To select the memory,
go to Set memory [Menu-5-3-5-1]. (Refer to page 57.)
Use this to select the ring tone to be used when
you receive a voice phone call from a person in the
group.
• Adding new entries into SIM memory
You can enter a name and number, and select the
required group. (Depends on the SIM)
• Group icon
• Adding new entries into the phone memory
Use this to select the graphic icon to be displayed
when you receive a call from a person in the
group.
You can enter a name, numbers, E-mail address and
select the required group. And select which number
will be the main number.
• Add member
Caller groups [Menu-5-3-3]
Add a member to the group. You can add up to 20
members per group.
You can list up to 20 contacts per group. There are 7
pre-defined groups, where you can create lists.
• Remove member
Removes the member from the group member list.
The contact entry still remains in the phonebook.
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
56
Organiser [Menu-5 ]
• Rename
• Search by
Assigns a new name to the group.
You can set the phone to search by name or number,
when you search the phonebook. If you select
Variable, the phone will ask how to search when you
search the phonebook.
Speed dial [Menu-5-3-4]
You can assign any of the keys 2 to 9 with a name list
entry. You can call directly by pressing this key for 2-3
seconds.
• View options
You can set the phonebook display option.
1. Open the phonebook first by pressing the right soft
key [Names] in standby mode.
- Name only : When you search the phonebook, the
list displays only names.
2. Scroll to Speed dial, then press [Select].
- With pictures : When you search the phonebook,
the list displays names and corresponding pictures.
3. To add a number to Speed dial, select (Empty). Then,
you can search the name through the phonebook.
- Name & number: When you search the phonebook,
the list displays names and numbers.
4. You can change or delete a speed dial number,
make a call or send a message by pressing the left
soft key [Option].
Copy all [Menu-5-3-6]
You can copy/move entries from the SIM card memory
to the phone memory and vice versa.
Settings [Menu-5-3-5]
• Set memory
• SIM to Phone : Use this to copy the entry from the
SIM Card to the Phone memory.
You can select the memory for the phonebook
feature between the SIM and the phone. If you select
Variable, when adding entry, the phone will ask
where to save the number.
• Phone to SIM : Use this to copy the entry from the
Phone memory to the SIM Card.
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
57
Organiser [Menu-5 ]
The following options are available.
• Memory status: You can check the current
memory status of the SIM card or the phone
memory.
• Keep original : When copying, the original dial
numbers are kept.
• Own number (SIM dependent): Use this to display
your phone number in the SIM card.
• Delete original : When copying, the original dial
numbers will be erased.
Delete all [Menu-5-3-7]
You can delete all entries in the SIM and/or phone.
This function requires the security code.
]Press
to return to standby mode.
Information [Menu-5-3-8]
• Service dial number (SIM dependent):
Use this to view the list of Service Dialling Numbers
(SDN) assigned by your network operator (if
supported by the SIM card). Such numbers include
the emergency, directory enquiries and voice mail
numbers.
1. Select the Service dial number option.
2. The names of the available services will be shown.
3. Use the up/down navigation keys to select a
service. Press
.
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
58
Tools [Menu-6 ]
Calculator [Menu-6-2]
Press the menu key (
navigation keys.
) and select Tools using the
Using this feature, you can use the phone as a
calculator. The calculator provides the basic
arithmetic functions: addition, subtraction,
multiplication and division. (You can enter numbers up
to the second decimal place).
Favourites [Menu-6-1]
In this menu, you can construct your own menu with
the menus you use frequently for easy access.
Using the Calculator
1. After selecting the desired location from menu
number 1 to 9, press the left soft key [Add].
1. Enter the first number using the numeric keys.
2. Select the menu you wish to add, then press the left
soft key [Add]. The menu is added in the Favourites
menu, with the pop-up message, “Added as a
favourite menu”.
2. Press the corresponding navigation key to select a
mathematical function.
Note
• To erase any mistakes or clear the display, press
After making up the Favourites menu, in each favourite
menu, the following options are available by pressing
the left soft key [Options].
the
the
key. To include a decimal point, press
key. To include a minus sign, press the
key.
- Select
: Selects the menu.
- Change
: You can change the favourite menu with
another menu.
3. To calculate the result, press the left soft key
[Result].
- Delete
: Deletes the selected favourite menu.
4. After calculation, press the left soft key [Reset] to
- Delete all : Deletes all the favourite menus.
return to the menu.
- Information : Displays the route to the favourite menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
59
Tools [Menu-6 ]
3. Select the unit you want to convert using the
left/right navigation keys.
My folder [Menu-6-3]
The downloaded contents through WAP, MMS or EMS
are stored in each folder. You can view, delete or
control the downloaded contents.
4. Move to the Convert unit section by pressing the
down navigation key.
5. Select the unit you want to convert to, using the
left/right navigation keys.
Picture [Menu-6-3-1]
Select a picture from the list by pressing the left soft
key [View]. Then, you can set it as the wallpaper or
send it via multimedia message by pressing the left
soft key [Options].
6. numbers using the numeric keys. Conversion is
calculated automatically.
Note
• You can input a decimal number by pressing the
key.
Sound [Menu-6-3-2]
You can select a sound from the list. After selecting the
desired sound, you can set it as the ring tone, send the
sound via SMS or MMS, using the left soft key [Options].
World time [Menu-6-5]
You can check the current time of Greenwich Mean
Time (GMT) and 65 major cities around the world,
using the left/right navigation keys.
Unit converter [Menu-6-4]
This converts any measurement from one unit to
another. There are 4 types that can be converted into
units: Length, Area, Weight and Volume.
The screen shows the city name, current date and time.
To select the time zone in which you are located,
proceed as follows:
1. Select one of four unit types by pressing the left soft
key [Unit].
1. Select the city corresponding to your time zone by
pressing the left/right navigation keys. The local date
and time are displayed.
2. Move to the current unit section by pressing the
down navigation key.
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
60
Tools [Menu-6 ]
2. If you want to change the time display in standby
mode to the selected time, press the left soft key
[Set].
View list [Menu-6-6-2]
The phone shows the voice memo title which you have
recorded. You can play back or delete the recorded
voice memo.
Note
• The time zone setting of each city in World time
menu may be affected by network condition.
• Playback: Plays back the voice memo.
• Write multimedia message: You can write multimedia
messages using the voice memo.
• Delete: Deletes the voice memo.
Voice recorder [Menu-6-6]
• Delete all: Allows you to delete all the memos. Press
the left soft key [Yes] to confirm.
You can record a memo. You can record up to 10 voice
memos up to a maximum of 20 seconds each. You can
play or delete the recorded memo or record new voice
memo using the left soft key [Options] key.
Note
• In standby mode, you can access this menu by
pressing the
key.
Record [Menu-6-6-1]
1. Once recording is started, the message
‘Recording...’ and the remaining time is displayed.
Memory status [Menu-6-7]
2. When you finish recording, press left soft key [Save].
You can check the current memory status of each
repository: Free memory, Text message, Multimedia
message, Inbox, Outbox, Drafts, Multimedia templates,
Messages in SIM, Push message, Voice memo,
Picture, Sound. And you can go to each repository to
manage it.
Note
• In standby mode, you can start recording by
pressing and holding the
key.
• If all memo locations are full, you must delete an old
memo before recording a new one.
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
61
Internet [Menu-7 ]
You can access various WAP (Wireless Application
Protocol) services such as banking, news, weather
reports and flight information. These services are
specially designed for mobile phones and they are
maintained by WAP service providers. Check the
availability of WAP services, pricing and tariffs with
your network operator and/or the service provider
whose service you wish to use. Service providers will
also give you instructions on how to use their services.
Using the WAP browser menu
There are various menu options available when surfing
the Mobile Web.
Note
• The WAP browser menus may vary, depending on
your browser version.
Home [Menu-7-1]
Once connected, the homepage is displayed. The
content depends on the service provider. To exit the
Connects to a homepage. The homepage will be the
site which is defined in the activated profile. It will be
defined by the service provider if you have not defined
it in the activated profile.
browser at any time, press the (
will return to the standby mode.
) key. The phone
Navigating with the WAP browser
You can surf the Internet using either the phone keys
or the WAP browser menu.
Bookmarks [Menu-7-2]
This menu allows you to store the URL of favourite web
pages for easy access at a later time. Your phone has
several pre-installed T-Mobile bookmarks. These pre-
installed bookmarks cannot be deleted.
Using the phone keys
When surfing the Internet, the phone keys function
differently to phone mode.
Key
Description
Scrolls each line of the content area
Returns to the previous page
Selects options and confirms actions
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
62
Internet [Menu-7 ]
To create a bookmark
1. T-Mobile Internet
1. Press the left soft key [Options].
2. Select Add new.
If you want to connect the server via WAP 2.0,
activate this profile.
2. T-Mobile GPRS
3. After entering the desired URL and title, press the
.
If you want to connect the WAP server over GPRS,
activate this profile.
→ Tip: Use the key
and
key to enter
.
3. T-Mobile WAP
symbols. To enter “.”, press
If you want to connect the WAP server over CSD,
activate this profile. For more information, consult T-
mobile.
After selecting a desired bookmark, the following
options are available.
• Connect : Connects to the selected bookmark.
Each profile has submenus as follows:
• Activate
• Add new : Select this to create a new bookmark.
• Edit
: You can edit the URL and/or the title of the
selected bookmark.
Activates the selected profile.
• Settings
• Delete : Deletes the selected bookmark.
Use this to edit and change WAP settings for the
selected profile.
• Delete all: Deletes all the bookmarks.
- Homepage
Profiles [Menu-7-3]
This setting allows you to enter the address (URL)
of a site you want to use as homepage. You do not
WAP Browser will automatically add it.
A profile is the network information used to connect to
the Internet. T-mobile supports three kinds of profile.
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
63
Internet [Menu-7 ]
- Bearer
Linger time : You need to enter timeout period.
After entering that, the WAP
You can set the bearer data service.
navigation service will be unavailable
if any data is not input or transferred.
• Data
• GPRS
- GPRS settings
- Data settings
The service settings are only available when GPRS
is chosen as a bearer service.
Appears only if you select Data Settings as a
Bearer / service.
IP address : Input the IP address of the WAP
gateway you access.
IP address : Enter the IP address of the WAP
gateway you want.
APN : Input the APN of the GPRS.
Dial number : Enter the telephone number to dial to
User ID : The users identify for your APN server.
access your WAP gateway.
Password : The password required by your APN
User ID : The users identity for your dial-up server
server.
(and NOT the WAP gateway).
- Connection type
Password : The password required by your dial-up
server (and NOT the WAP gateway) to
identify you.
The options for connection type are Temporary or
Continuous and depend on the gateway you are
using.
Call type : Select the type of data call : Analogue of
Continuous
Digital (ISDN)
A confirmed delivery mechanism but generates
more network traffic.
Call speed : The speed of your data connection ;
9600 or 14400
Temporary
A non-confirmed (connectionless) service.
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
64
Internet [Menu-7 ]
HTTP
• Rename
Connecting Clients to Server directly in HTTP
You can change the profile name.
• Delete
- Proxy settings
IP address : Input the IP address of the Proxy
Deletes the selected profile from the list.
• Add new
server you access.
Port : Input the Proxy Port
You can add a new profile.
- DNS settings
Go to URL [Menu-7-4]
Insert the primary and secondary DNS if required
by the network operator.
You can connect directly to the site you want. After
entering a specific URL, press the
.
Primary server
Input the IP address of the primary DNS server you
access.
Cache settings [Menu-7-5]
The information or services you have accessed are
saved in the cache memory of the phone.
Secondary server
Input the IP address of the secondary DNS server
you access.
Clear cache [Menu-7-5-1]
Removes all context saved in cache.
- Secure settings
Check cache [Menu-7-5-2]
According to the used gateway port, you can
choose this option as On or Off.
Set a value whether a connection attempt is made
through cache or not.
- Display image
You can select whether images on WAP cards are
displayed or not.
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
65
Internet [Menu-7 ]
Note
Reset profiles [Menu-7-8]
• A cache is a buffer memory, which is used to save
data temporarily.
You can reset profiles to return to original settings.
Browser version [Menu-7-9]
Cookies settings [Menu-7-6]
The WAP browser version is displayed.
The information or services you have accessed are
saved in the cache memory of the phone.
Clear cookies [Menu-7-6-1]
Removes all context saved in cookie.
Check cookies [Menu-7-6-2]
Check whether a cookie is used or not.
Security certification [Menu-7-7]
A list of the available certification is shown.
• Authority
You can see the list of authority certificates that have
been stored in your phone.
• Personal
You can see the list of personal certificates that have
been stored in your phone.
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
66
Games [Menu-8 ]
You can enjoy a game on the phone. For further details,
use the onscreen instruction or help menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
67
Accessories
There are a variety of accessories available for your
mobile phone. You can select these according to your
personal communication requirements. Consult your
local dealer for availability.
Note
• Always use genuine LG accessories. Failure to do
this may invalidate your warranty.
• Accessories may be different in different regions;
please check with our regional service company
or agent for further enquiries.
Battery pack
Headset
Allows hands-free operation.
Includes earpiece and
microphone.
Travel Adapter
This charger allows you to charge
the battery while away from home
or your office.
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
68
Technical Data
General
Product name : B2050
System
: GSM 900 / DCS 1800 / PCS 1900
Ambient Temperatures
Max
Min
: +55°C
: -10°C
Storage
SMS/MMS(#) : Yes SMS (200) MMS (100)
Battery
Standby
Talktime
: approx. 200 hours
: approx. 200 minutes
Download from Www.Somanuals.com. All Manuals Search And Download.
B2050 User Guide
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|