Color television
OWNER’S MANUAL
MODELS: 30FZ1DC
32FZ1DC-UB
R
TruSurround XT
Please read this manual carefully and completely before
operating your TV.
Retain this manual for future reference.
Record model number and serial number of the TV in the
spaces provided below.
See the label attached on the back cover and relate this
information to your dealer if you require service.
Model Number :
Serial Number :
LG Electronics U.S.A., Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or
sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the appa-
ratus.
This information shall be given in a language acceptable to the country where the apparatus is intended to be used.
The important safety instructions shall be entitled “Important Safety Instructions”. The following safety instructions shall be
included where applicable, and, when used, shall be verbatim as follows. Additional safety information may be included by
adding statements after the end of the following safety instruction list. At the manufacturer’s option, a picture or drawing
that illustrates the intent of a specific safety instruction may be placed immediately adjacent to that safety instruction :
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampli-
fiers)that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two blades and a third grounding prong, The wide blade or
the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an elec-
trician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the appara-
tus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
PORTABLE CART WARNING
(Continued on next page)
P A G E 3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in
any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has exposed to rain or moisture, does not operate normally, or has been dropped.
15. CAUTION concerning the Power Cord :
Most appliances recommend they be placed upon a dedicated circuit; that
is, a single outlet circuit which powers only that appliance and has no
additional outlets or branch circuits. Check the specification page of
this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or damaged or
cracked wire insulation are dangerous. Any of these conditions could
result in electric shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage or deterioration,
unplug it, discontinue use of the appliance, and have the cord replaced
with an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such as being
twisted, kinked, pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and the point where the
cord exits the appliance.
16. Outdoor Use Marking :
WARNING - To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Appliance To Rain Or Moisture.
17. Wet Location Marking :
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be
placed on the apparatus.
P A G E 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Safety Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Important Safety Instructions . . . . . . . . . . . . . . . . .3-4
EZ SoundRite . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Stereo/SAP Broadcasts Setup . . . . . . . . . . . . . . . . . .28
EZ Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Manual Sound Control . . . . . . . . . . . . . . . . . . . . . .29
TV Speaker on/off Setup . . . . . . . . . . . . . . . . . . . . .29
Front Surround . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Step 1. Hook Up TV
Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . .6
Rear Connections Panel . . . . . . . . . . . . . . . . . . . . . . .7
Front Connections Panel (FRONT VIDEO) . . . . . . . . . . . .8 TIME Menu
ANT/Cable Service Hookup . . . . . . . . . . . . . . . . . . . . .9
Cable Box Connections . . . . . . . . . . . . . . . . . . . . . . .10
VCR Connections . . . . . . . . . . . . . . . . . . . . . . . . . . .11
DVD Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Set-top Box Hookup . . . . . . . . . . . . . . . . . . . . . . . .13
Digital Audio Output . . . . . . . . . . . . . . . . . . . . . . . .14
HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Remote Control Functions in TV Mode . . . . . . . . . . .16-17
Turning the TV on . . . . . . . . . . . . . . . . . . . . . . . . . .18
On-Screen Displays . . . . . . . . . . . . . . . . . . . . . . . . .18
Auto Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . .31
Manual Clock Setup . . . . . . . . . . . . . . . . . . . . . . . .32
TV Turn Off Time Setup . . . . . . . . . . . . . . . . . . . . .33
TV Turn On Time Setup . . . . . . . . . . . . . . . . . . . . . .34
Sleep Timer Setup . . . . . . . . . . . . . . . . . . . . . . . . .35
Auto off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
OPTION Menu
Aspect Ratio Control . . . . . . . . . . . . . . . . . . . . . . .37
Captions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Caption/Text . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Caption Option Menu . . . . . . . . . . . . . . . . . . . . . . .40
On-Screen Menu Languages . . . . . . . . . . . . . . . . . . .41
Velocity Modulation . . . . . . . . . . . . . . . . . . . . . . . .42
Tilt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Cinema 3:2 Mode Setup . . . . . . . . . . . . . . . . . . . . .43
EZ Demo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Step 2. Customize your TV’s Features
SETUP Menu
EZ Scan (Channel Search) . . . . . . . . . . . . . . . . . . . .19
Channel Edit . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
DTV Signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Degaussing the screen . . . . . . . . . . . . . . . . . . . . . .21
Channel Label Setup . . . . . . . . . . . . . . . . . . . . . . .22
Input Source Selection . . . . . . . . . . . . . . . . . . . . . 23
LOCK Menu
Parental Lock Setup . . . . . . . . . . . . . . . . . . . . .45-46
VIDEO Menu
Step 3. Miscellaneous
EZ Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Manual Video Control . . . . . . . . . . . . . . . . . . . . . . .25
Color Temperature . . . . . . . . . . . . . . . . . . . . . . . . .26
XD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Video Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Programming the Remote . . . . . . . . . . . . . . . . . . . . .47
Programming Codes . . . . . . . . . . . . . . . . . . . . . .48-50
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . .51-52
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . .53-54
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55-56
Product Specifications . . . . . . . . . . . . . . . . . . . . . .57
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
AUDIO Menu
Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . .27
Note: Design and specifications are subject to change without prior notice.
P A G E 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel Controls
- Here shown may be somewhat different from your TV.
VOL
CH
TV/VIDEO
MENU
5
1
3
6
4
2
7
power
1
2
Standby indicator (Illuminates brightly when the TV is
in standby mode. Dims when the TV is switched on.)
Remote control sensor
TV/VIDEO
3
4
menu
5
6
vol left/ right
Volume(G) button increases the sound level and vol-
ume(F) button decreases the sound level.
ch (Channel) up / down
7
These buttons work just as they do on your
remote control.
P A G E 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Connections Panel
- Connecting external equipment to your TV.
- Here shown may be somewhat different from your TV.
CALIBRATION
RF Connectors:
Antenna Input,
Used to connect
cable or antenna sig-
nals to the television,
either directly or
through your cable
box.
Digital Audio
Output Optical
Connects to external
audio equipment
like a home theater
system.
ANTENNA
DIGITAL
AUDIO OUTPUT
OPTICAL
+75 Ω
COMPONENT1
COMPONENT2
DIGITAL
AUDIO INPUT
OPTICAL
(DVI)
(480i/480p/720p/1080i)
Digital Audio Input
Optical
Connects to digital
audio from various
types of equipment.
R
R
AUDIO
L
AUDIO
L
AUDIO
VIDEO L(MONO)
R
PR
PR
IN3
HDMI/DVI
S-VIDEO
INPUT
Left/Right Audio
PB
Y
PB
Y
IN2
IN1
Used for stereo sound
from various types of
equipment.
HDMI/DVI Input
Used to connect
from a DTV source.
DVD/DTV INPUT
Y, PB, PR
DVD Component Video and HD
Component Video
Component Left/Right
Audio
Used for stereo sound from
S-Video In
Video 1, 2 and 3 Inputs
A connection available
with some high-end
equipment that provides
even better picture
Some top-of-the-line DVD players use
what is called “component video,” for
extremely accurate picture reproduc-
tion. Refer to your DVD manual for
further information.
Connects the video signals
from various types of
equipment.
various types of equipment.
quality for Video 1, 2.
Mini glossary
JACK
A connection on the back of a TV, VCR, or any other A/V device. This includes the RF jack and the Audio/Video jacks that are color-
coded.
SIGNAL
Picture and sound traveling through cable, or over the air, to your television screen.
P A G E 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Connections Panel
There are four jacks on the lower-right front
front of your TV that make connecting
Audio/Video devices like video games and
camcorders very simple.
The jacks are like those found on the back
jack connection panel. This means that most
equipment that connects to those types of
jacks on the rear jackpack, may be connected
to the Front connection panel (Front Video).
To use the Front jacks as the signal source,
select them using Main input menu as
described on page 23. They will be named
“Front Video” in the Main input menu.
When you select Front video or
Front S-Video, the Front Audio
inputs are automatically selected
as well.
Front A/V Panel
S-Video
A connection available on some very
high-end equipment that provides
better picture quality than video
input.
Do not connect to both Video and
S-Video at the same time.
Connect either Video or S-Video
only.
FRONT VIDEO
Video in
Left/Right Audio
Connects the video
signals from any
piece of equipment.
Used for stereo sound
from various types of
equipment.
Mini glossary
A/V CABLES Audio/Video cables. Three cable connector—Right audio (red), Left audio (white), and Video (yellow). A/V cables are used for stereo
playback of videocassettes and for higher quality picture and sound from other A/V devices.
A/V DEVICE Any device that produces video (picture) and/or audio (sound) (VCR, DVD, cable box, or television).
P A G E 8
Download from Www.Somanuals.com. All Manuals Search And Download.
Antenna / Cable Service Hookup
Cable TV
Wall jack
Antenna
Connect an antenna and/or cable service to
your TV as shown.
1
RF coaxial wire
(75 ohm)
RF coaxial wire
(75 ohm)
Turn to page 19 to do a channel search
with EZ Scan.
2
CALIBRATION
If you receive your RF signal through an
antenna that is several years old and con-
nects with two small prongs, you will need to
purchase a 300 to 75 ohm adapter. It should
be available from your local
ANTENNA
+75 Ω
DIGITAL
AUDIO OUTPUT
OPTICAL
electronics dealer.
DIGITAL
AUDIO INPUT
OPTICAL
(DVI)
We recommend using a 75 ohm cable for
your antenna connection in order to prevent
interference.
Mini glossary
TV
CATV
OVER-THE-AIR SIGNALS
CABLE SIGNALS
DTV
CADTV
DIGITAL OVER-THE-AIR SIGNALS
DIGITAL CABLE SIGNALS
Combined signals
TV/CATV/DTV
TV/CATV/CADTV
Over-the-air, cable, and digital over-the-air signals
Over-the-air, cable, and digital cable signals
CAUTION : If you are not sure of the type of signal(s) you are receiving, let EZ Scan complete all the channel signal-type searches. The TV will let
you know when the analog, cable, and digital channel scans are complete.
For best signal reception, it is recommended to have your Antenna professionally adjusted.
P A G E 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Cable Box Connections
Cable TV Wall
jack panel
Locate the output jack on the back of
your cable box. Connect this to the Cable
jack on the back of your TV.
1
In
Out
Output
Switch
3
4
Or find the composite video and audio
jacks on the back of your cable box, and
connect them following the instructions
provided with your equipment.
RF coaxial wire
(75 ohm)
This can be combined with any other
equipment you may want to hook up.
ANTENNA
+75 Ω
COMPONENT1
COMPONENT2
(480i/480p/720p/1080i)
R
R
AUDIO
L
AUDIO
L
Cable box
AUDIO
VIDEO L(MONO)
R
PR
PR
IN3
S-VIDEO
INPUT
Audio
Video
PB
Y
PB
Y
IN2
IN1
R
L
TV
VCR
DVD/DTV INPUT
If you’re using a cable box, leave the TV on
channel 3 or 4 and use your cable box to
change channels.
P A G E 1 0
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Connections
Locate the Cable jack on the back
of your TV. Connect this to out
jack on the back of your VCR.
1
Or find the composite video and
audio jacks on the back of your
VCR, and connect them following
the instructions provided with
your equipment.
Cable TV Wall
jack panel
ANTENNA
+75 Ω
Antenna
You may connect either the com-
posite video or the S-Video cables
to your TV. (Do not connect BOTH
the composite and the S- Video
cables. In the event that you con-
nect both composite and the S-
Video cables, only the S-Video will
work.)
COMPONENT1
COMPONENT2
Round wire
(75 ohm)
(480i/480p/720p/1080i)
RF coaxial wire
(75 ohm)
R
R
AUDIO
L
AUDIO
L
AUDIO
VIDEO L(MONO)
R
PR
PR
IN3
IN2
IN1
Back AV panel
S-VIDEO
INPUT
PB
Y
PB
Y
Output
Switch
In
3
4
Out
S-Video
Audio
Video
DVD/DTV INPUT
R
L
or
VCR
A/V cables
not included
with TV
To hear stereo sound from cable or your VCR,
you will need to connect A/V cables as well as
the wire that runs from the VCR to your TV.
If you want to receive your signals on Channel
3 or 4, locate the Out to TV jack on your VCR.
Connect a cable from the Out to TV jack to the
Antenna jack on the back of your TV.
P A G E 1 1
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Player
CALIBRATION
DVD player
ANTENNA
+75
DIGITAL
AUDIO OUTPUT
OPTICAL
Ω
Find the component or S-Video
1
2
jacks for video connections,
depending on your DVD connec-
tors. Then make the correspond-
ing audio connections. See the
diagram for either set up.
Back AV panel
COMPONENT1
COMPONENT2
DIGITAL
AUDIO INPUT
OPTICAL
(DVI)
(480i/480p/720p/1080i)
R
R
AUDIO
L
Audio
L
Digital Audio
Optical
R
Component Video
AUDIO
L
PR
PR
HDMI/DVI
You may connect either the
composite video or the S-Video
cables to your TV. Do not con-
nect both the composite and
the S-Video.
PB
Y
PB
Y
A/V cables
not included
with TV
DVD/DTV INPUT
DVD player
Back AV panel
Audio
L
R
S-Video
CALIBRATION
ANTENNA
+75
Ω
DIGITAL
or
Some high-end DVD players use
a picture reproduction system
called “component video.” If
your DVD player has component
output, use the connectors
marked “Component 1 or 2” on
the jack panel. Please refer to
your DVD manual for proper
installation.
AUDIO OUTPUT
OPTICAL
COMPONENT1
COMPONENT2
DIGITAL
AUDIO INPUT
OPTICAL
(DVI)
(480i/480p/720p/1080i)
R
R
AUDIO
L
AUDIO
L
AUDIO
VIDEO L(MONO)
R
A/V cables
not included
with TV
IN3
PR
PR
HDMI/DVI
S-VIDEO
INPU
PB
Y
PB
Y
IN2
IN1
DVD/DTV INPUT
• Component Input ports
You can get better picture quality if you
connect a DVD player using the component
input ports as shown below.
Component input jacks
Y
PB
PR
on the TV
Pr
R-Y
Cr
Y
Y
Y
Y
Pb
B-Y
Cb
Video output jacks
of DVD player
PR
PB
Mini glossary
COMPONENT VIDEO
Some video equipment uses three separate lines (Y, PB, PR) to more precisely reproduce images. Your manual will explain how
this relates to your equipment.
P A G E 1 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Set-top box Hookup
Find the audio and Y, PB, PR jacks or
CALIBRATION
1
2
HDMI/DVI output port on the back of
your set-top box and connect them fol-
lowing the instructions provided with
your equipment.
Set-top Box
ANTENNA
+75
Ω
Digital Audio
Optical Output
DIGITAL
AUDIO OUTPUT
OPTICAL
COMPONENT1
COMPONENT2
Connect these cables to your TV as
shown.
DIGITAL
AUDIO INPUT
OPTICAL
(DVI)
(480i/480p/720p/1080i)
or
R
R
AUDIO
L
AUDIO
L
PR
PR
HDMI/DVI
Set-top Box
PB
Y
PB
Y
Component Out
Pb Pr
Audio
DVD/DTV INPUT
Y
L
R
or
Set-top Box
DIGITAL
AUDIO INPUT
OPTICAL
(DVI)
HDMI/DVI
The DTV shows the sharpest picture in 720p/1080i mode.
Component 1 (or 2) Input
HDMI/DVI
Y
PB
PR
1920x1080i
1280x720p
720x480p
1920X1080i
1280X720p
720X480p
720X480i
P A G E 1 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital Audio Output
Send the TV’s audio out to external audio equipment (stereo system) via
the Digital Audio Output Optical port.
Connect one end of an optical cable to
the TV Digital Audio Optical Output port.
1
Connect the other end of the optical cable
to the digital audio optical input on the
audio equipment.
2
See the external audio equipment instruc-
tion manual for operation.
CALIBRATION
ANTENNA
+75
Ω
DIGITAL
AUDIO OUTPUT
OPTICAL
Caution: Do not look into the optical output
port. Looking at the laser beam may damage
your vision.
DIGITAL
AUDIO INPUT
OPTICAL
(DVI)
HDMI/DVI
Digital Audio
Optical Input
Digital Audio
Equipment
P A G E 1 4
Download from Www.Somanuals.com. All Manuals Search And Download.
HDMI
- HDMITM, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC."
- This DTV can receive the High-Definition Multimedia Interface(HDMI) or Input of Digital Visual Interface(DVI).
- This DTV supports HDCP(High-bandwidth Digital Contents Protection) Protocol for DTV(480p, 720p, 1080i) modes.
- When you Connect with HDMI Source Devices (DVD Player or Set Top Box) supporting Auto HDMI function, automatically, support Plug & Play
and then set the HDMI Source Devices(1920 x 1080i). After reading in HDMI Source Devices using Display Data Channel(DDC) Protocol, EDID
stored in DTV is used. If HDMI Source Devices not supported Auto HDMI/DVI is been, the Resolution is setted, manually.
- To get the best picture quality, adjust the DVD Player or Set Top Box output resolution to 1920 x 1080i.
- When Source Devices have DVI Output Connector, you must connect audio with separated cable. (Refer to <How to connect>)
- The HDMI is not supported in 480i source.
How to connect
1. When Source Devices(DVD Player or Set Top Box) support HDMI.
- If Source Devices have HDMI Output Connector, Source Devices connect to DTV with HDMI Cable .(not supplied with the product).
- If Source Devices support Auto HDMI, automatically, Source Devices divert output resolution in 1920 x 1080i. But if not, resolution divert
Manually Setting for reference Manual of Source Devices.
- To get the best picture quality, adjust the DVD Player or Set Top Box output resolution to 1920 x 1080i.
- Because HDMI sends Digital Video and Audio with one cable, need not especial Audio Cable for using HDMI Cable.
2. When Source Devices(DVD Player or Set Top Box) supports DVI.
- If Source Devices have DVI Output Connector, Source Devices connect to DTV with HDMI to DVI Cable (not supplied with the product).
- If Source Devices support Auto DVI, automatically, Source Devices divert output resolution in 1920 x 1080i. But if not, resolution divert
Manually Setting for reference Manual of Source Devices.
- To get the best picture quality, adjust the DVD Player or Set Top Box output resolution to 1920 x 1080i.
- In this case, Audio use other cable. When Source Devices have Fiber Optic Digital Audio Output Connector, Digital Audio DVI Input(DVI) of
DTV connect to Fiber Optic Digital Audio Cable (not supplied with the product) or when Source Devices have Analog Audio Output Connector,
RGB/DVI Audio Input of DTV connect to Audio Cable (not supplied with the product). And then you can listen to normal Audio.
Reference
Cable sample
HDMI to DVI Cable (not supplied with the product)
HDMI Cable (not supplied with the product)
How to use
1. Connect the HDMI Source Devices (DVD Player or Set Top Box) and the TV set.
2. Turn on the display by pressing the ON/OFF button on the TV set and HDMI Source Devices remote control.
3. Check the image on your TV set. There may be noise associated with the resolution, vertical pattern, contrast or brightness in HDMI
Source Devices. If noise is present, change the HDMI Source Devices to another resolution, change the refresh rate or adjust the bright-
ness and contrast on the menu until the picture is clear.
P A G E 1 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Functions in TV Mode
MODE INDICATOR
LIGHTS
MODE
Selects the remote operating mode:
TV, VCR, Cable, DVD or Satellite.
Select other operating modes, for
the remote to operate external
devices.
Show active remote mode
every time any button is
pressed.
VCR CABLE DVD
TV
SAT
TV/VIDEO
Selects: Antenna, Cable, Video1,
Video2, Front video, Component 1-2
and HDMI/DVI input sources.
MODE
POWER
TV/VIDEO
VIDEO1
Selects the Video1 input source.
FRONT
HDMI
VIDEO1
COMP1
VIDEO2
COMP2
COMP2
Selects the Component 2 input
source.
MUTE
Switches the Mute or the EZ mute.
Mute: The sound is off. EZ mute: Turns
the sound off, and displays the caption.
1
4
7
2
5
8
0
3
6
9
FAV
Use to scroll the FAV channel
list.
EZ SOUND
Selects the sound appropriate
for the program’s category.
EZ PIC
DASH(-)
FLASHBK
Adjusts the factory preset picture depending
on the viewing environment.
FAV
MUTE
RATIO
Changes the aspect ratio.
EZ PIC
EZ SOUND
VOL
CH
SURROUND
Selects : Off, 3D EchoSound
System and SRS TruSurround
XT.
RATIO FREEZE
SAP SURROUND
FREEZE
Captures and freezes
the currently-viewed
picture.
SAP
TIMER
INFO
CC
Selects MTS sound: Mono, Stereo,
and SAP in analog mode.
Change the audio language in
DTV mode.
SIGNAL
THUMBSTICK
(UP/DOWN/LEFT/RIGHT/
)
CC
Allows you to navigate the on-screen menus
Lets you select a closed caption
mode for displaying captioning
information when provided for
DTV/Analog signal.
and to adjust the system settings and prefer-
D
ences, by moving to an option withF
G
and
.
selecting the highlighted option Ewith
MENU
EXIT
EXIT
MENU
Brings up the main menu
to the screen.
Clears all on-screen displays
and returns to TV viewing
from any menu.
PLAY
REW
PAUSE
FF
RECORD
STOP
SKIP
P A G E 1 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Functions in TV Mode
VCR CABLE DVD
TV
SAT
VIDEO2
Selects the Video2 input source.
POWER
Turns your TV or any other
programmed equipment on or
off, depending on mode.
MODE
POWER
TV/VIDEO
FRONT
HDMI
COMP1
Selects the Component 1 input
source.
VIDEO1
COMP1
VIDEO2
COMP2
FRONT
Selects the front video input source.
1
4
7
2
5
8
0
3
6
9
HDMI
Selects the HDMI input source.
NUMBER KEYPAD
For direct channel selection and
programming functions.
DASH(-)
Is used to enter a program num-
ber for multiple program channels
such as 2-1,2-2,etc.
DASH(-)
FLASHBK
FLASHBK
Tunes to the previous channel
viewed.
FAV
MUTE
EZ PIC
EZ SOUND
CHANNEL UP/DOWN
Scrolls through available channels
present in EZ Scan memory.
VOL
CH
VOLUME UP/DOWN
Increases/decreases the sound level.
RATIO FREEZE
SAP SURROUND
TIMER
INFO
CC
SIGNAL
INFO
When you watch the TV, dis-
plays information on top of the
screen. Not available in
SIGNAL
Displays the digital signal
strength.
Component 1-2 and HDMI/DVI.
ENTER
When in the menu system and
other on-screen displays,
selects highlighted options.
TIMER
Lets you select the amount of
time before your TV turns
itself off automatically.
MENU
EXIT
PLAY
REW
PAUSE
FF
RECORD
STOP
RECORD, PAUSE, REW, FFWD,
PLAY, STOP
SKIP LEFT/RIGHT
Playing CDs: Selects songs.
Playing DVDs: Selects movie
chapters.
Control the functions on your VCR.
SKIP
P A G E 1 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning the TV On
First, connect antenna cable and power cord correctly. At this moment, the TV switches to standby mode.
1
2
3
In standby mode to turn TV on, press the POWER, CH +/-, TV/VIDEO, FRONT or number buttons on the
remote control or TV/VIDEO or CH on the TV.
/
D E
Select the viewing source by using TV/VIDEO, COMP, FRONT or HDMI button on the remote control.
This TV is programmed to remember which mode it was last set to, even if you turn the TV off.
Note: See page 19 if you have not auto programmed the TV to receive channels in your local broadcast area.
When finished using the TV, press the POWER button on the remote control. The TV reverts to standby mode.
If you will be away on vacation, disconnect the power plug from the wall power outlet.
On-Screen Displays
This page describes your on-screen display and information banner options.
Channel Display
Displays current channel number.
TV 2-0
MONO
Channel Label
Displays current
channel label.
Mute
10
10:00 AM
Time
Appears when pressing the
enter button on remote control.
Volume
Volume level is displayed
while adjusting the sound.
Mute
Appears when
sound is muted.
P A G E 1 8
Download from Www.Somanuals.com. All Manuals Search And Download.
EZ Scan (Channel Search)
Automatically finds all channels available
through antenna or cable inputs, and stores
them in memory on the channel list.
Use pages 9-14 to connect external
1
equipment to your TV. If you have done
so, plug in your TV to a standard 120V,
60Hz power outlet.
VCR CABLE DVD
TV
SAT
MODE
POWER
TV/VIDEO
3
FRONT
HDMI
VIDEO1
COMP1
VIDEO2
COMP2
1
4
7
2
5
8
0
3
6
9
If you have done so, remove the back of
2
the remote and install in two AA batter-
ies. Make sure batteries are properly
installed (check the +/– symbols).
DASH(-)
FLASHBK
FAV
MUTE
EZ PIC
EZ SOUND
VOL
CH
back of
remote
RATIO FREEZE
SAP SURROUND
With the remote control in hand, press
the POWER button to turn your TV on.
TIMER
INFO
CC
SIGNAL
3
6
4
5
Press the MENU button on the remote control,
4
MENU
EXIT
then use the UP/DOWN arrow button to select
4
4
the SETUP menu.
PLAY
REW
PAUSE
FF
RECORD
STOP
Press the RIGHT arrow button to access the
SETUP menu.
5
SKIP
Press ENTER button to begin the channel
6
search. Note: Allow EZ Scan to complete the
channel search cycle for Air (TV->CATV->DTV),
Cable (TV->CATV->CADTV) etc.
Run EZ Scan again after any
Antenna/Cable connection changes.
P A G E 1 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel Edit
Create two different types of channel lists in memory: “Custom
list” and “Favorite channel list” from the default channel list
made in the EZ scan menu.
A custom list can be created by toggling each channel on or off
with the (Enter) key. Once a channel is highlighted, you will be
able to see whether the channel is currently added or deleted by
referring to the small window at the top-left corner of the screen.
You can create your own favorite channel list with up to 20 chan-
nels.
VCR CABLE DVD
TV
SAT
MODE
POWER
TV/VIDEO
Use the FAV button on the remote control when a channel is high-
lighted, to add or delete the channel in the favorite channel list.
FRONT
HDMI
VIDEO1
COMP1
VIDEO2
COMP2
Press the MENU button on the remote
control, then use the UP/DOWN arrow
button to select the SETUP menu.
1
4
7
2
5
8
0
3
6
9
1
Press the RIGHT arrow button to access
the SETUP menu.
DASH(-)
FLASHBK
2
FAV
MUTE
4
Use the UP/DOWN arrow button to select
EZ PIC
EZ SOUND
3
Ch.Edit and then press the RIGHT arrow
VOL
CH
button.
RATIO FREEZE
SAP SURROUND
You will now see a screen filled with
4
TIMER
INFO
CC
SIGNAL
channel numbers and a preview picture.
Use the UP/DOWN and LEFT/RIGHT arrow
button to select a channel, then use
4
4
1/3/4
2/3/4
the
button to add or delete it. Press
FAV to add the channel to the Fav List.
MENU
EXIT
1/5
Press EXIT button to return to TV viewing
or press MENU button to return to the
previous menu.
5
5
PLAY
REW
PAUSE
FF
RECORD
STOP
1/3/4
SKIP
CATV is available for 1-135 channel.
P A G E 2 0
Download from Www.Somanuals.com. All Manuals Search And Download.
DTV Signal
Lets you know how strong your DTV signal is and whether
you need to adjust your antenna or digital cable input.
The higher the signal strength, the less likely you are to
experience degradation.
Using the SIGNAL button
Press the SIGNAL button on the remote
control.
1
View the on-screen signal strength moni-
tor to see the quality of the signal being
received.
2
Press exit button to return to TV viewing.
3
Using the menu
NOT all areas or programs are currently
available with Digital DTV signals.
Select the DTV in Input Source on the
menu, to check the DTV signal.
Press the MENU button on the remote
control, then use the UP/DOWN arrow
button to select the SETUP menu.
1
Press the RIGHT arrow button to access
the SETUP menu.
2
Use the UP/DOWN arrow to select the DTV
Signal. Current signal strength is shown
on menu.
3
Press EXIT button to return to TV viewing.
4
Degaussing the Screen
The magnetic field of the earth may affect the color puri-
ty of the picture and other magnetic influences nearby
may also have an affect on color purity. Even the installa-
tion direction of the TV set may affect color purity.
Stripes may appear on the screen or the color may not be
equal in the corners. You can restore color quality by
operating the Degauss.
Press the MENU button on the remote
control, then use the UP/DOWN arrow
button to select the SETUP menu.
1
Press the RIGHT arrow button to access
the SETUP menu.
2
Use the UP/DOWN arrow button to select
Degauss, then press the RIGHT arrow
button to perform the Degauss function.
If you are unable to correct problem by degaussing,
try again after about 4 minutes.
3
Press EXIT button to return to TV viewing
or press MENU button to return to the
previous menu.
4
P A G E 2 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel Label Setup
Choose preset labels for your channels.
Use Channel +/- on your remote control in the Ch Label
menu to select a channel for labeling, and choose a suit-
able label for your channel by pressing
label to the selected channel.
to set the
Press the MENU button on the remote
control, then use the UP/DOWN arrow
button to select the SETUP menu.
1
VCR CABLE DVD
TV
SAT
MODE
POWER
TV/VIDEO
Press the RIGHT arrow button to access
the SETUP menu.
FRONT
HDMI
VIDEO1
COMP1
VIDEO2
COMP2
2
3
Use the UP/DOWN arrow button to select
ch.Label and then press the RIGHT arrow
button.
1
4
7
2
5
8
0
3
6
9
You will now see a screen filled with
Labels and a preview screen. Use channel
+/- button on your remote control to
select the a channel to Label.
4
5
DASH(-)
FLASHBK
FAV
MUTE
EZ PIC
EZ SOUND
VOL
CH
Use the UP/DOWN and LEFT/RIGHT arrows
to select the appropriate label for the
channel and press to set the Label to
the selected channel.
4
RATIO FREEZE
SAP SURROUND
TIMER
INFO
CC
SIGNAL
Repeat 4 and 5 steps until all channels
are Labeled.
5
5
6
7
1/3/5
2/3/5
7
Press EXIT button to return to TV viewing
or press MENU button to return to the
previous menu.
MENU
EXIT
1/7
PLAY
REW
PAUSE
FF
RECORD
STOP
1/3/5
The TV displays a short name for a DTV
channel even if you didn't preset a label
for the channel.
SKIP
P A G E 2 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Input Source Selection
Note: Changes the picture source for the screen so you
can watch your on-air TV, cable TV, VCR, DVD, or
any other devices that are connected to your TV.
Using the TV/VIDEO, FRONT, COMP1-2 and HDMI button
Use the TV/VIDEO, FRONT, COMP1-2, and
1
HDMI button to select the input source.
Each time you press TV/VIDEO button, you
toggle between Antenna, Cable, Video1,
Video 2, Video3, Front Video, Component1,
Component 2, and HDMI/DVI.
Using the menu
Press the MENU button on the remote
control, then use the UP/DOWN arrow
button to select the SETUP menu.
1
Press the RIGHT arrow button to access
the Setup menu.
2
Use the UP/DOWN arrow to select the
Input Source option.
3
Press the RIGHT arrow to access the Input
Source menu, then use the UP/DOWN
4
arrow button to select the source. Your
Main picture source options are : Antenna,
Cable, Video1, Video2, Video3, Front
video, Component1, Component2, and
HDMI/DVI.
Press EXIT button to return to TV viewing
or press MENU button to return to the
previous menu.
5
P A G E 2 3
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO Menu
Each video menu adjustment doesn’t effect other input
sources. Readjust Video menu for each input source.
EZ Picture
This function adjusts the TV to the best picture appear-
ance. Select the preset value in the EZ Picture menu
based on the program category.
Normal, Digital Preset, Night Time, Movie, Weak Signal,
Video Game, and Sports are preset for good picture quali-
ty at the factory and cannot be changed.
When adjusting video options (Contrast, Brightness, Color,
Sharpness, and Tint) manually, EZ Picture automatically
changes to ‘Off’.
Using the EZ PIC button
Choose the Normal option to reset the EZ picture
options to their factory preset values, or use your
own settings with Off.
Use the EZ PIC button to select EZ Picture option.
1
Each press of the EZ PIC button change the EZ Picture
option: Off, Normal, Digital Preset, Night Time, Movie,
Weak Signal, Video Game, and Sports.
2
Press EXIT to save and return to TV viewing.
VCR CABLE DVD
TV
SAT
MODE
POWER
TV/VIDEO
Using the menu
FRONT
HDMI
VIDEO1
COMP1
VIDEO2
COMP2
Press the MENU button on the remote control,
1
then use the UP/DOWN arrow button to select
the VIDEO menu.
1
4
7
2
5
8
0
3
6
9
Press the RIGHT arrow button to access the
VIDEO menu.
2
DASH(-)
FLASHBK
Use the UP/DOWN arrows to select the EZ Picture
option.
FAV
MUTE
3
EZ PIC
EZ SOUND
VOL
CH
Press the RIGHT arrow to access the EZ Picture
menu, then use the UP/DOWN arrow button to
4
RATIO FREEZE
SAP SURROUND
select the options: Off, Normal, Digital Preset,
Night Time, Movie, Weak Signal, Video Game, and
Sports.
TIMER
INFO
CC
SIGNAL
1/3/4
• Off: Allows you to adjust the picture the way
you want.
2/4
5
• Normal: Resets all the options to their preset
values.
MENU
EXIT
1/5
1/3/4
PLAY
REW
PAUSE
FF
RECORD
STOP
• Other options adjust the picture to the source’s
image.
SKIP
Press EXIT button to return to TV viewing or press
MENU button to return to the previous menu.
5
P A G E 2 4
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO Menu
Manual Video Control
Adjust the picture appearance to suit your preference and
viewing situations.
Press the MENU button on the remote
control, then use the UP/DOWN arrow
button to select the VIDEO menu.
You can manually adjust the levels of picture quality settings,
such as Contrast, Brightness, Sharpness, etc.
1
Press the RIGHT arrow button to access
the VIDEO menu.
2
VCR CABLE DVD
TV
SAT
Use the UP/DOWN arrow button to select
one of the following options: Contrast,
Brightness, Color, Sharpness, or Tint, then
press the RIGHT arrow button.
3
MODE
POWER
TV/VIDEO
FRONT
HDMI
VIDEO1
COMP1
VIDEO2
COMP2
• Contrast: Adjusts the difference
between the light and dark levels of
the picture.
1
4
7
2
5
8
0
3
6
9
• Brightness: Adjusts the white or light
level of the overall picture.
DASH(-)
FLASHBK
• Color: Adjusts the intensity of all col-
FAV
MUTE
ors.
EZ PIC
EZ SOUND
• Sharpness: Adjusts the level of crisp-
ness in the edges between the light
and dark areas of the picture. The lower
the level, the softer the image.
VOL
CH
RATIO FREEZE
SAP SURROUND
TIMER
INFO
CC
SIGNAL
• Tint: Adjusts the balance between the
red and green levels.
1/3/4
2/3/4
5
4
Use the LEFT/RIGHT arrow button to
adjust the option to your preference. Use
the UP/DOWN arrow button to select
another option.
4
MENU
EXIT
1/5
PLAY
REW
PAUSE
FF
RECORD
STOP
1/3/4
Press EXIT button to return to TV viewing
or press MENU button to return to the
previous menu.
5
SKIP
P A G E 2 5
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO Menu
Color Temperature
Lets you choose one of three automatic color adjustments. Set this to warm for hotter colors such as red, or set to cool for less intense
colors with more blue.
Press the MENU button on the remote control, then use
the UP/DOWN arrow button to select the VIDEO menu.
1
2
3
4
Press the RIGHT arrow button to access the VIDEO
menu.
Use the UP/DOWN arrow button to select Color
Temperature, and then press the RIGHT arrow button.
Use the UP/DOWN arrow button to select Warm,
Medium, or Cool.
Press EXIT button to return to TV viewing or press
MENU button to return to the previous menu.
5
XD
- XD is LG Electronic’s unique picture improving technology to display a real
HD source through an advanced digital signal processing algorithm.
- When selecting EZ PIC options (Normal, Digital Preset, Night Time, Movie,
Weak Signal, Video Game, and Sports), XD is automatically change to On.
Press the MENU button on the remote control, then use
the UP/DOWN arrow button to select the VIDEO menu.
1
Press the RIGHT arrow button to access the VIDEO
menu.
2
Use the UP/DOWN arrow button to select XD, and then
press the RIGHT arrow button.
3
Use the UP/DOWN arrow button to select Off or On.
4
Press EXIT button to return to TV viewing or press
MENU button to return to the previous menu.
5
Video Preset
This is the function to quickly reset every Video menu
option to their factory preset values.
Press the MENU button on the remote control, then use
the UP/DOWN arrow button to select the VIDEO menu.
1
Press the RIGHT arrow button to access the VIDEO
menu.
2
Use the UP/DOWN arrow button to select Video Preset.
3
Use the RIGHT arrow button to preset the video config-
uration.
4
P A G E 2 6
Download from Www.Somanuals.com. All Manuals Search And Download.
AUDIO Menu
Audio Language
Other languages may be available only if a digital signal is being sent by the broadcasting station.
Press the MENU button on the remote
control, then use the UP/DOWN arrow
button to select the AUDIO menu.
1
Press the RIGHT arrow button to access
the AUDIO menu.
2
3
Use the UP/DOWN arrow button to select
Audio Language, then press the RIGHT
arrow button.
Use the UP/DOWN arrow button to select
the language you wish.
4
5
Press EXIT button to return to TV viewing
or press MENU button to return to the
previous menu.
EZ SoundRite
Scans for changes in sound level during commercials, then adjusts the sound to match the current audio level. This will make sure
that the volume level will be consistent whether you are watching a commercial or a regular TV program.
Press the MENU button on the remote
control, then use the UP/DOWN arrow
button to select the AUDIO menu.
1
Press the RIGHT arrow button to access
the AUDIO menu.
2
3
Use the UP/DOWN arrow button to select
EZ SoundRite, then press the RIGHT arrow
button.
Use the UP/DOWN arrow button to select
On or Off.
4
5
Press EXIT button to return to TV viewing
or press MENU button to return to the
previous menu.
P A G E 2 7
Download from Www.Somanuals.com. All Manuals Search And Download.
AUDIO Menu
Stereo/SAP Broadcasts Setup
This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo
program; if the station transmits an additional sound signal as well as the original one.
Use the SAP button to select your desired MTS mode in analog signal. Each time
you press the SAP button, MONO, STEREO, or SAP appear in turn.
1
2
Press EXIT to save and return to TV viewing.
Stereo or SAP can be received only when the TV station transmits those signals even
though you have selected STEREO or SAP.
Mono sound is automatically received if the broadcast is only in Mono; even though
STEREO or SAP has been selected.
Select MONO if you want to listen to the mono sound in remote fringe areas during
stereo/SAP broadcasting.
EZ Sound
Using the EZ SOUND button
Use the EZ SOUND button to select EZ Sound option.
1
Each press of the EZ SOUND button change the EZ Sound
option: Off, Normal, Stadium, News, Music and Theater.
This function lets you enjoy the best sound without any special
adjustment because the TV automatically selects the appropriate
sound option based on the program content.
Normal, Stadium, News, Music and Theater are preset for good
sound quality at the factory and cannot be changed.
When adjusting audio options (treble, bass and Front Surround)
manually, EZ Sound automatically changes to Off.
2
1
Press EXIT button to save and return to TV viewing.
Using the menu
Press the MENU button on the remote
control, then use the UP/DOWN arrow
button to select the AUDIO menu.
Press the RIGHT arrow button to access
the AUDIO menu.
2
3
4
Use the UP/DOWN arrow to select the EZ
Sound option.
Press the RIGHT arrow to access the EZ
Sound menu, then use the UP/DOWN
arrow button to select the options: Off,
Normal, Stadium, News, Music and
Theater.
• Off: Allows you to adjust the sound the
way you want.
• Normal: Resets all the options to their
Choose the NORMAL option in EZ Sound to quickly
reset the Audio Menu options to their original pre-
set values, or use your own settings with Off.
preset values.
• Other options adjust the TV's audio out-
put to the source’s sound.
Press EXIT button to return to TV viewing
or press MENU button to return to the
previous menu.
5
P A G E 2 8
Download from Www.Somanuals.com. All Manuals Search And Download.
AUDIO Menu
Manual Sound Control
Adjust the sound to suit your taste and room situations.
Press the MENU button on the remote control, then use
the UP/DOWN arrow button to select the AUDIO menu.
1
Press the RIGHT arrow button to access the AUDIO
menu.
2
Use the UP/DOWN arrow button to select one of the
following options: Balance, Treble, or Bass, then press
the Right arrow button.
3
• Balance: Lets you adjust the left to right balance of
the TV speakers.
• Treble: Increases or decreases the higher frequency
sounds from the TV speakers.
• Bass: Increases or decreases the lower frequency
sounds from the TV speakers.
Use the LEFT/RIGHT arrow button to adjust the option
to your preference. Use the UP/DOWN arrow to select
another option.
4
Press EXIT button to return to TV viewing or press
MENU button to return to the previous menu.
5
TV Speaker On/Off Setup
Turns the TV Speaker option On or Off.
Press the MENU button on the remote control, then use
the UP/DOWN arrow button to select the AUDIO menu.
1
Press the RIGHT arrow button to access the AUDIO
menu.
2
Use the UP/DOWN arrow button to select TV Speaker,
then press the RIGHT arrow button.
3
Use the UP/DOWN arrow button to select On or Off.
4
Press EXIT button to return to TV viewing or press
MENU button to return to the previous menu.
5
P A G E 2 9
Download from Www.Somanuals.com. All Manuals Search And Download.
AUDIO Menu
is a trademark of SRS Labs, Inc.
TruSurround XT technology is incorporated under license
from SRS Labs, Inc.
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
Front Surround
Using the SURROUND button
Use the SURROUND button to select Front Surround
option.
1
Each press of the SURROUND button change the
Front Surround option: Off, 3D EchoSound System or
SRS (Sound Retrieval System) TruSurround XT.
Press EXIT to save and return to TV viewing.
2
1
Using the menu
Press the MENU button on the remote
control, then use the UP/DOWN arrow
button to select the AUDIO menu.
Press the RIGHT arrow button to access
the AUDIO menu.
2
3
VCR CABLE DVD
TV
SAT
MODE
POWER
TV/VIDEO
Use the UP/DOWN arrow button to select
Front Surround, then press the RIGHT
arrow button.
FRONT
HDMI
VIDEO1
COMP1
VIDEO2
COMP2
Use the UP/DOWN arrow button to select
Off, 3D EchoSound System or SRS (Sound
Retrieval System) TruSurround XT.
1
4
7
2
5
8
0
3
6
9
4
5
DASH(-)
FLASHBK
Press EXIT button to return to TV viewing
or press MENU button to return to the
previous menu.
FAV
MUTE
EZ PIC
EZ SOUND
VOL
CH
RATIO FREEZE
SAP SURROUND
Mini glossary
SRS TruSurround XT
Takes advantage of any multi-channel format
TIMER
INFO
CC
SIGNAL
without needing to add extra speakers or equip-
ment. Dialog clarity, bass enrichment and the
addition of stereo audio enhancement that pro-
duces an immersive sound experience from stan-
dard stereo material.
1/3/4
2/3
5
MENU
EXIT
1/5
1/3/4
PLAY
REW
PAUSE
FF
RECORD
STOP
3D EchoSound System
Creates a stunning simulated stereo effects from
any mono sound and a realistic three-dimensional
sound with a very wide and deep sound stage
into stereo sound.
SKIP
P A G E 3 0
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Clock Setup
Sets the time automatically through the digital channel
signal.
The digital channel signal includes information for the
current time provided by the broadcasting station.
Press the MENU button on the remote
control, then use the UP/DOWN arrow
button to select the TIME menu option.
1
Press the RIGHT arrow button to go to
the TIME menu.
2
VCR CABLE DVD
TV
SAT
Use the UP/DOWN arrow button to choose
Auto Clock, then press the RIGHT arrow
button.
3
MODE
POWER
TV/VIDEO
FRONT
HDMI
VIDEO1
COMP1
VIDEO2
COMP2
Use the UP/DOWN arrow button to choose
On, then use the RIGHT arrow button to
select Time Zone.
4
1
4
7
2
5
8
0
3
6
9
Use the UP/DOWN arrow button to adjust
Time Zone.
5
DASH(-)
FLASHBK
• Select the time zone for your viewing
area. Your options are: Eastern,
Central, Mountain, Pacific, Alaska,
Hawaii.
FAV
MUTE
EZ PIC
EZ SOUND
VOL
CH
RATIO FREEZE
SAP SURROUND
Press EXIT button to return to TV viewing
or press MENU button to return to the
previous menu.
6
TIMER
INFO
CC
SIGNAL
1/3/4/5
2/3/4
6
MENU
EXIT
Set the clock manually again if the
current time is incorrect with auto
clock function.
1/6
PLAY
REW
PAUSE
FF
RECORD
STOP
1/3/4/5
SKIP
P A G E 3 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Clock Setup
If current time setting is erased by a power failure or if
TV is unplugged, reset the clock.
Press the MENU button on the remote
control, then use the UP/DOWN arrow
button to select the TIME menu option.
1
Press the RIGHT arrow button to activate
the Time menu.
2
VCR CABLE DVD
TV
SAT
Use the UP/DOWN arrow button to choose
Manual Clock, then press the RIGHT arrow
button.
3
MODE
POWER
TV/VIDEO
FRONT
HDMI
VIDEO1
COMP1
VIDEO2
COMP2
Use the LEFT/RIGHT arrow button to
select either the year, date or time option.
Once selected, use the UP/DOWN arrow
button to set the year, date or time
option.
4
1
4
7
2
5
8
0
3
6
9
Press EXIT button to return to TV viewing
or press MENU button to return to the
previous menu.
DASH(-)
FLASHBK
5
FAV
MUTE
EZ PIC
EZ SOUND
VOL
CH
RATIO FREEZE
SAP SURROUND
TIMER
INFO
CC
SIGNAL
1/3/4
4
2/3/4
5
MENU
EXIT
1/5
PLAY
REW
PAUSE
FF
RECORD
STOP
1/3/4
SKIP
P A G E 3 2
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Turn Off Time Setup
Lets you set an automatic daily turn off time for your TV.
Off Timer function overrides On Timer function if they are
both set to the same time.
You must set the current time on the clock before using
on/off timers.
Press the MENU button on the remote
control, then use the UP/DOWN arrow
button to select the TIME menu.
1
Press the RIGHT arrow button to to go to
the TIME menu.
2
VCR CABLE DVD
TV
SAT
Use the UP/DOWN arrow button to choose
Off Timer, then press the RIGHT.
3
MODE
POWER
TV/VIDEO
FRONT
HDMI
VIDEO1
COMP1
VIDEO2
COMP2
Use the UP/DOWN arrow button to choose
On, then press the RIGHT arrow button.
4
Use the LEFT/RIGHT arrow button to
select the hour or minutes options, then
use the UP/DOWN arrow button to set the
hours or minutes.
1
4
7
2
5
8
0
3
6
9
5
DASH(-)
FLASHBK
Press EXIT button to return to TV viewing
or press MENU button to return to the
previous menu.
FAV
MUTE
6
EZ PIC
EZ SOUND
VOL
CH
RATIO FREEZE
SAP SURROUND
TIMER
INFO
CC
SIGNAL
To cancel Off Timer function, use the
UP/DOWN arrow button to select Off in
step 4.
1/3/4/5
5
2/3/4/5
6
MENU
EXIT
1/6
PLAY
REW
PAUSE
FF
RECORD
STOP
1/3/4/5
SKIP
P A G E 3 3
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Turn On Time Setup
Lets you set an automatic daily turn on time for your TV.
Off timer function overrides on timer function if they are
both set to the same time.
Unless a button is pressed within two hours after the TV
is turned on by the On Timer function, the TV will auto-
matically turn off.
TV must be in standby mode for the On Timer to work.
Press the MENU button on the remote
control, then use the UP/DOWN arrow
button to select the TIME menu.
1
Press the RIGHT arrow button to activate
the TIME menu.
2
VCR CABLE DVD
TV
SAT
Use the UP/DOWN arrow button to choose
On Timer, then press the RIGHT arrow
button.
3
MODE
POWER
TV/VIDEO
FRONT
HDMI
VIDEO1
COMP1
VIDEO2
COMP2
Use the UP/DOWN arrow to choose On,
then press the RIGHT arrow button.
4
1
4
7
2
5
8
0
3
6
9
Use the LEFT/RIGHT arrow button to
select either Time, Channel, or Volume.
Once selected, use the UP/DOWN arrow
button to set either the Time, Channel, or
Volume options.
5
DASH(-)
FLASHBK
FAV
MUTE
EZ PIC
EZ SOUND
Press EXIT button to return to TV viewing
VOL
CH
6
or press MENU button to return to the
previous menu.
RATIO FREEZE
SAP SURROUND
TIMER
INFO
CC
SIGNAL
To cancel On Timer function, use the
UP/DOWN arrow button to select Off in
step 4.
1/3/4/5
5
1/6
2/3/4/5
6
MENU
EXIT
PLAY
REW
PAUSE
FF
RECORD
STOP
1/3/4/5
SKIP
P A G E 3 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Sleep Timer Setup
Lets you select the amount of time if you want your TV to
turns itself off, automatically.
Using the TIMER button
Press the TIMER button on the remote
control repeatedly to select the number of
minutes.
1
First the Off option will appear on the
screen, followed in sequence 10, 20, 30,
60, 90, 120, 180, and 240. The timer
begins to count down from the number of
minutes selected.
Press EXIT button to save and return to
TV viewing
2
Using the menu
VCR CABLE DVD
TV
SAT
Press the MENU button on the remote
control, then use the UP/DOWN arrow
button to select the TIME menu.
1
MODE
POWER
TV/VIDEO
FRONT
HDMI
VIDEO1
COMP1
VIDEO2
COMP2
Press the RIGHT arrow button to go to
the Time menu.
2
1
4
7
2
5
8
0
3
6
9
Use the UP/DOWN arrow button to choose
Sleep Timer then press the RIGHT arrow
button.
3
DASH(-)
FLASHBK
Use the UP/DOWN arrow to choose a pre-
set turn off time.
FAV
MUTE
4
EZ PIC
EZ SOUND
VOL
CH
Press EXIT button to return to TV viewing
or press MENU button to return to the
previous menu.
RATIO FREEZE
SAP SURROUND
5
TIMER
INFO
CC
SIGNAL
When the sleep time you want is displayed
on the screen, don’t press the timer button
again.
1/3/4
2/3
5
MENU
EXIT
To check the remaining sleep time, press
the TIMER button once.
1/5
1/3/4
PLAY
REW
PAUSE
FF
RECORD
STOP
To change sleep time setting, press the
TIMER button repeatedly to select time set-
ting you want.
SKIP
If you turn the TV off after setting the
sleep timer, the setting will be erased.
P A G E 3 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Off
If there is no input signal, the TV can be set up to switch
to standby mode automatically after 10 minutes.
Press the MENU button on the remote
control, then use the UP/DOWN arrow
button to select the TIME menu.
1
Press the RIGHT arrow button to go to
the TIME menu.
2
VCR CABLE DVD
TV
SAT
Use the UP/DOWN arrow button to choose
Auto Off then press the RIGHT arrow.
3
MODE
POWER
TV/VIDEO
FRONT
HDMI
VIDEO1
COMP1
VIDEO2
COMP2
Use the UP/DOWN arrows to choose On or
Off.
4
Press EXIT button to return to TV viewing
or press MENU button to return to the
previous menu.
1
4
7
2
5
8
0
3
6
9
5
DASH(-)
FLASHBK
FAV
MUTE
EZ PIC
EZ SOUND
VOL
CH
RATIO FREEZE
SAP SURROUND
TIMER
INFO
CC
SIGNAL
1/3/4
2/3
5
MENU
EXIT
1/5
1/3/4
PLAY
REW
PAUSE
FF
RECORD
STOP
SKIP
P A G E 3 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Aspect Ratio Control
Lets you choose the way that an analog picture with a 4:3 aspect ratio is displayed on your TV with a 16:9 ratio.
When you receive an analog picture with a 4:3 aspect ratio on your 16:9 TV, you need to specify how the picture is to
be displayed according to your preference.
Using the RATIO button
Use the RATIO button to select the desired picture for-
mat.
1
Each press of the RATIO button changes the picture for-
mat. Your options are: Set By Program, 4:3, 16:9,
Horizon, Zoom1, Zoom2, and Cinema Zoom.
Press EXIT to save and return to TV viewing.
2
Using the menu
Press the MENU button on the remote control, then use
the UP/DOWN arrow button to select the OPTION menu.
1
When you receive a picture with a 16:9 aspect ratio, you
can’t specify horizon aspect ratio.
Press the RIGHT arrow button to go to the OPTION
2
menu.
If you select a horizon during receiving a 4:3 aspect
ratio, 16:9 aspect ratio is worked as set by program.
Use the UP/DOWN arrow to choose the Aspect Ratio
3
option, then press the RIGHT arrow button.
Use the UP/DOWN arrow button to select the desired
picture format.
4
• Use the UP/DOWN arrow button to adjust the
enlarge proportion of Cinema Zoom. The adjustment
of range is 1~16.
Press EXIT button to return to TV viewing or press
MENU button to return to the previous menu.
5
Mini glossary
Set By Program Select the proper picture proportion to match the source’s image. (4:3 → 4:3, 16:9 → 16:9)
4:3
Choose when you want to view a picture with an original 4:3 aspect ratio, with black bars appearing at both the left and right
sides.
16:9
Choose when you want to adjust the picture horizontally, in a linear proportion to fill the entire screen.
Horizon
Choose when you want to adjust the picture in a non-linear proportion, that is, more enlarged at both sides, to create a spectacu-
lar view.
Zoom1
Choose when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be
cropped.
Zoom2
Choose when you want the picture to be altered, both vertically extended and vertically cropped. The picture taking a halfway
trade off between alteration and screen coverage.
Cinema Zoom
Choose when you want to enlarge the picture in correct proportion. When enlarging or reducing the picture, the image may
become distorted.
P A G E 3 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Captions
Select a caption mode for displaying captioning informa-
tion when provided on the program.
This TV is programmed to remember the caption mode
it was last set to, when you turn the POWER off.
Press the MENU button on the remote control, then
use the UP/DOWN arrow button to select the OPTION
menu.
1
Press the RIGHT arrow button to activate the OPTION
menu.
2
3
Use the UP/DOWN arrow button to choose Caption,
then press the Right arrow button.
VCR CABLE DVD
TV
SAT
MODE
POWER
TV/VIDEO
Use the UP/DOWN arrow to choose On or Off.
4
5
FRONT
HDMI
VIDEO1
COMP1
VIDEO2
COMP2
Press EXIT button to return to TV viewing or press
MENU button to return to the previous menu.
1
4
7
2
5
8
0
3
6
9
DASH(-)
FLASHBK
FAV
MUTE
EZ PIC
EZ SOUND
VOL
CH
RATIO FREEZE
SAP SURROUND
TIMER
INFO
CC
SIGNAL
1/3/4
2/3
5
MENU
EXIT
1/5
1/3/4
Mini glossary
PLAY
REW
PAUSE
FF
RECORD
STOP
CAPTIONS
The term for the words that scroll across the bot-
tom of the TV screen; usually the audio portion of
the program provided for the hearing impaired.
SKIP
TEXT
The term for the words that appear in a large
black frame and almost cover the entire screen;
usually messages provided by the broadcaster.
P A G E 3 8
Download from Www.Somanuals.com. All Manuals Search And Download.
Captions/Text
Analog caption displays information at any position on
the screen usually the program's dialog.
Text displays information, usually at the bottom position
and is used for a data service, generally not program
related.
Caption/Text, if provided by the broadcaster, would be
available for both digital and analog channels on the
Antenna/Cable source.
Using the CC button
Use the CC button to select caption.
1
Each press of the CC button changes the
caption option; Off, CC1, CC 2, CC 3, CC 4,
Text 1, Text 2, Text 3, or Text 4.
Press EXIT to save and return to TV view-
ing.
2
VCR CABLE DVD
TV
SAT
MODE
POWER
TV/VIDEO
FRONT
HDMI
VIDEO1
COMP1
VIDEO2
COMP2
Using the menu
1
4
7
2
5
8
0
3
6
9
Press the MENU button on the remote
control, then use the UP/DOWN arrow
button to select the OPTION menu.
1
DASH(-)
FLASHBK
Press the RIGHT arrow button to activate
the OPTION menu.
FAV
MUTE
2
EZ PIC
EZ SOUND
VOL
CH
Use the UP/DOWN arrow button to choose
Caption/Text, then press the Right arrow
3
RATIO FREEZE
SAP SURROUND
button.
TIMER
INFO
CC
SIGNAL
Use the UP/DOWN arrow button to make
your caption selection. Your choices are:
CC1, CC 2, CC 3, CC 4, Text 1, Text 2, Text 3,
or Text 4.
4
1/3/4
2/3
5
MENU
EXIT
Press EXIT button to return to TV viewing
or press MENU button to return to the
previous menu.
1/5
1/3/4
5
PLAY
REW
PAUSE
FF
RECORD
STOP
SKIP
P A G E 3 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Caption Option Menu
Customize the DTV/CADTV captions that will
appear on your screen.
Press the MENU button on the remote
control, then use the UP/DOWN arrow
button to select the OPTION menu.
1
Press the RIGHT arrow button to access
the OPTION menu.
2
Use the UP/DOWN arrow to select the
Caption Option, then press the RIGHT
arrow button.
3
Use the LEFT/RIGHT arrow button to
select Custom.
4
VCR CABLE DVD
TV
SAT
MODE
POWER
TV/VIDEO
Use UP/DOWN arrow button to customize
5
the Style, Font, etc., to your preference.
Your Caption options are:
FRONT
HDMI
VIDEO1
COMP1
VIDEO2
COMP2
• Size: Set the size the words will appear
in.
1
4
7
2
5
8
0
3
6
9
• Font: Select a typeface for the words.
• Text Color: Choose a color for the text.
• Text Opacity: Specify the opacity for
the text color.
• Bg (Background) Color: Select a back-
ground color.
DASH(-)
FLASHBK
FAV
MUTE
EZ PIC
EZ SOUND
• Bg (Background) Opacity: Select the
VOL
CH
opacity for the background color.
RATIO FREEZE
SAP SURROUND
• Edge Type: Select an edge type.
• Edge Color: Select a color for the
edges.
TIMER
INFO
CC
SIGNAL
Press EXIT button to return to TV viewing
or press MENU button to return to the
previous menu.
1/3/4
2/3/4
5
6
4
MENU
EXIT
1/5
PLAY
REW
PAUSE
FF
RECORD
STOP
1/3/4
A preview icon is provided at the bottom
of the screen, use it to see the caption
language.
SKIP
P A G E 4 0
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Menu Languages
Select your preferred language for the menus: English,
Español (Spanish), or Français (French).
Press the MENU button on the remote
control, then use the UP/DOWN arrow
button to select the OPTION menu.
1
Press the RIGHT arrow button to go to
the OPTION menu.
2
Use the UP/DOWN arrow to choose the
Language, then press the RIGHT arrow
button.
3
Use the UP/DOWN arrow button to select
the language you want the on screen
menus to appear in.
4
Press EXIT button to return to TV viewing
or press MENU button to return to the
previous menu.
5
VCR CABLE DVD
TV
SAT
MODE
POWER
TV/VIDEO
FRONT
HDMI
VIDEO1
COMP1
VIDEO2
COMP2
1
4
7
2
5
8
0
3
6
9
DASH(-)
FLASHBK
FAV
MUTE
EZ PIC
EZ SOUND
VOL
CH
RATIO FREEZE
SAP SURROUND
TIMER
INFO
CC
SIGNAL
1/3/4
2/3
5
MENU
EXIT
1/5
1/3/4
PLAY
REW
PAUSE
FF
RECORD
STOP
SKIP
P A G E 4 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Velocity Modulation
Use this function to improve the outline distinction of
the picture's edges.
If you select VM ‘Off’, the TV will automatically return
the pictures' edge appearance to factory settings.
Press the MENU button on the remote con-
trol, then use the UP/DOWN arrow button
to select the OPTION menu.
1
Press the RIGHT arrow button to access the
OPTION menu.
2
Use the UP/DOWN arrow button to select
VM, and then press the RIGHT arrow button.
3
Use the UP/DOWN arrow button to select
Off, Low, or High.
4
Press EXIT button to return to TV viewing or
press MENU button to return to the previ-
ous menu.
5
Tilt
The picture on the TV screen may be tilted to the left
or right if the set is moved to a different place or
direction. Picture Tilt should be used to correct any
tilt.
Press the MENU button on the remote
control, then use the UP/DOWN arrow
button to select the OPTION menu.
1
Press the RIGHT arrow button to access
the Option menu.
2
Use the UP/DOWN arrow button to select
Tilt, then, use the LEFT/RIGHT arrow but-
ton to adjust and correct any Tilt.
3
Press EXIT button to return to TV viewing
or press MENU button to return to the
previous menu.
4
P A G E 4 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Cinema 3:2 Mode Setup
Most movies are 24 frames/sec, but TV signal is 30 frames/sec.
This option lets the TV do 3:2 pull-down operation for you to
watch movies at the best motion appearance.
VCR CABLE DVD
TV
SAT
Press the MENU button on the remote
1
control, then use the UP/DOWN arrow
button to select the OPTION menu.
MODE
POWER
TV/VIDEO
FRONT
HDMI
VIDEO1
COMP1
VIDEO2
COMP2
Press the RIGHT arrow button to access
the OPTION menu.
2
1
4
7
2
5
8
0
3
6
9
Use the UP/DOWN arrow to choose
Cinema 3:2 Mode, then press the Right
arrow button.
3
DASH(-)
FLASHBK
Use the UP/DOWN arrow to choose On or
Off.
FAV
MUTE
4
EZ PIC
EZ SOUND
VOL
CH
Press EXIT button to return to TV viewing
5
or press MENU button to return to the
previous menu.
RATIO FREEZE
SAP SURROUND
TIMER
INFO
CC
SIGNAL
1/3/4
2/3
MENU
EXIT
1/5
1/3/4
5
PLAY
REW
PAUSE
FF
RECORD
STOP
SKIP
P A G E 4 3
Download from Www.Somanuals.com. All Manuals Search And Download.
EZ Demo
Shows you how to navigate the TV's on-screen menus.
Press the MENU button on the remote
control, then use the UP/DOWN arrow
button to select the OPTION menu.
1
Press the RIGHT arrow button to access
the OPTION menu.
2
3
VCR CABLE DVD
TV
SAT
MODE
POWER
TV/VIDEO
Use the UP/DOWN arrow button to select
EZ Demo, then press the RIGHT arrow
button.
FRONT
HDMI
VIDEO1
COMP1
VIDEO2
COMP2
Press EXIT button on the remote to stop
EZ Demo.
1
4
7
2
5
8
0
3
6
9
4
DASH(-)
FLASHBK
FAV
MUTE
EZ PIC
EZ SOUND
VOL
CH
RATIO FREEZE
SAP SURROUND
TIMER
INFO
CC
SIGNAL
1/3
2/3
4
MENU
EXIT
1
PLAY
REW
PAUSE
FF
RECORD
STOP
1/3
SKIP
P A G E 4 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Parental Lock Setup
Lets you set up blocking schemes to block specific channels, ratings, and viewing
sources.
A password is required to gain access to this menu if the Lock System is activated.
If the lock is already set, enter the password as requested. The TV is set up with the
initial password ‘0’, ‘0’, ‘0’, ‘0’.
Press the MENU button on the remote control,
then use the UP/DOWN arrow button to select
the LOCK Menu option.
1
Press the RIGHT arrow button to activate the
LOCK Menu.
2
Use the UP/DOWN arrow to choose from the
following Lock Menu options. Once the options
are selected, change the settings to your pref-
erences.
3
• Lock System: Activates or disables the blocking
scheme you set up previously.
• Set Password: Change the password by inputting
a new password twice.
• Block Ch.: Blocks any channels that you do not
want to watch or that you do not want your chil-
dren to watch.
VCR CABLE DVD
TV
SAT
MODE
POWER
TV/VIDEO
• Movie Rating (MPAA): Blocks movies according
to the movie ratings limits specified, so children
cannot view certain movies. You can set the rat-
ings limit by blocking out all the movies with the
ratings above a specified level. Keep in mind that
the movie ratings limit only applies to movies
shown on TV, not TV programs, such as soap
operas.
FRONT
HDMI
VIDEO1
COMP1
VIDEO2
COMP2
1
4
7
2
5
8
0
3
6
9
DASH(-)
FLASHBK
FAV
MUTE
• TV Rating-Children: Keeps children from watch-
ing certain TV programs among only the programs
intended for children, according to the ratings
limit. The children rating does not apply to other
TV programs. Unless you block certain TV pro-
grams intended for mature audiences in the TV
Rating - sub menu, your children can view those
programs.
EZ PIC
EZ SOUND
VOL
CH
RATIO FREEZE
SAP SURROUND
TIMER
INFO
CC
SIGNAL
1/3
• TV Rating-General: Blocks certain TV programs
that you and your family do not want to view,
based on the ratings.
2
4
MENU
EXIT
1/4
1/3
• Aux. Block: Enables you to select a source for
blocking among the source devices you have
hooked up.
PLAY
REW
PAUSE
FF
RECORD
STOP
Press EXIT button to return to TV viewing or
press MENU button to return to the previous
menu.
SKIP
4
P A G E 4 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Parental Lock Setup (Continued)
Parental Lock Rating Descriptions
TV-Y (All Children): Program is appropriate for all children.
TV-Y7 (Children 7 years and Older): Program is designed for children age 7 and above.
TV-G (General audience): Most parents would find this program suitable for all ages.
TV-PG (Parental guidance suggested): Program contains material that parents may find unsuitable for younger children.
TV-14 (Parents strongly cautioned): Program contains some material that many parents would find unsuitable for chil-
dren under 14 years of age.
TV-MA (Mature audience only): Program is specifically designed to be viewed by adults and therefore may be unsuitable
for children under 17.
G (General audiences): All ages can view these programs.
PG (Parental guidance suggested): Some program content may not be suitable for children.
PG-13 (Parents strongly cautioned): Some program content may not be appropriate for children under 13.
R (Restricted): Children under 17 requires parent or adult guardian to be present.
NC-17: No one 17 and under admitted.
X: For Adult only.
Blocking Off: Permits all programs.
P A G E 4 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming the Remote
The remote control for your HD receiver is a multi-
brand or universal remote control. It can be pro-
grammed to operate most remote-controllable
devices of other manufacturers.
Note that the remote control may not control all
models of other brands.
VCR CABLE DVD
TV
SAT
MODE
POWER
TV/VIDEO
Test your remote control.
To find out whether your remote control can
3/4
2
1
FRONT
HDMI
VIDEO1
COMP1
VIDEO2
COMP2
operate the component without programming,
turn on the component such as a VCR and press
the corresponding mode button (VCR) on the
remote control, while pointing at the compo-
nent. Test the POWER and CH +/- buttons to see
if the component responds properly. If not, the
remote requires programming to operate the
device.
1
4
7
2
5
8
0
3
6
9
4
3
Turn on the component to be programmed, then
press the corresponding mode button on the
remote control.
DASH(-)
FLASHBK
2
FAV
MUTE
EZ PIC
EZ SOUND
Press the POWER and MUTE buttons simultane-
ously, the remote control is ready to be pro-
grammed for the code.
3
4
5
VOL
CH
RATIO FREEZE
SAP SURROUND
There are two ways to find the right code for the
component.
4
TIMER
INFO
CC
SIGNAL
A. If you press the CH +/- buttons repeatedly,
the codes will change one at-a-time. Press the
POWER button after each code change. If the
right code is found, the device will turn off.
B. Enter a code number using the number but-
tons on the remote. Programming code num-
bers for the corresponding component can be
found on the following pages.
Again, if the code is correct, the device will
turn off.
MENU
EXIT
PLAY
REW
PAUSE
FF
RECORD
STOP
SKIP
Press the EXIT button to store the code.
5
Test the remote control functions to see if the
component responds properly. If not, repeat
from step 2.
6
P A G E 4 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming Codes
VCRs
Brand
AIWA
AKAI
Codes
034
Brand
Codes
055 060 130
150 152
014 034 039
043 047 048
255
Brand
Codes
Brands
TOTEVISION
UNITECH
VECTOR RESEARCH
VICTOR
VIDEO CONCEPTS
VIDEOSONIC
WARDS
Codes
040 101
040
012
048
034 040 041
062 063 107
109 140 144
145 147
003 008 010
014 031 033
034 040 053
054 101
016 043 046
124 125 146
072
031 033 103
012 023 039
043
035 037 129
028 031 033
108
003 040 135
031 033 041
005 007 010
064 065 108
110 111 112
116 117 119
108
KENWOOD
AMPRO
ANAM
AUDIO DYNAMICS
LG
LLOYD
LXI
REALISTIC
012 034 046
040
034
003 009 013
014 017 034
101 106
003 013 017
024 031 033
034 040 053
054 131
012 034 039
043
001 034 048
056 058 072
080 101
BROKSONIC
CANON
CAPEHART
CRAIG
CURTIS MATHES
DAEWOO
RICO
058
148
014
MAGIN
MAGNAVOX
040
RUNCO
SALORA
SAMSUNG
031 033 034
041 067 068
012 031 033
067 069
101
027 030
YAMAHA
ZENITH
032 040 102
104 105 107
109 112 113
115 120 122
125
022 043 048
135
003 007 010
014 102 134
017 037 112
129 131
003 008 009
010 013 014
017 020 031
042 073 081
101
MARANTZ
MARTA
MATSUI
MEI
DAYTRON
DBX
031 033
SANSUI
SANYO
SCOTT
012 023 039
043
034 053
MEMOREX
003 010 014
031 033 034
053 072 101
102 134 139
045 046 059
013 020
013 020 045
046 049 051
059 061 151
034 040
DYNATECH
ELECTROHOME
EMERSON
059
006 017 025
027 029 031
034 035 036
037 046 101
129 131 138
153
MGA
MINOLTA
MITSUBISHI
SEARS
MTC
FISHER
003 008 009
010
034
031 033 063
072 107 109
144 147
MULTITECH
NEC
024 034
012 023 039
043 048
043
053 054
066 070 074
083 133 140
145
013 020 031
033 063
SHARP
SHINTOM
SONY
031 054 149
024
003 009 031
052 056 057
058 076 077
078 149
034
013
031 033 034
059 067
FUNAI
GE
NORDMENDE
OPTONICA
PANASONIC
GO VIDEO
GOLDSTAR
132 136
SOUNDESIGN
STS
SYLVANIA
012 013 020
101 106 114
123
PENTAX
HARMAN KARDON
HITACHI
012 045
PHILCO
PHILIPS
031 034 067
031 033 034
054 067 071
101
101
013 021 048
108
072
011 014
033 066 075
145
013 020 033
SYMPHONIC
TANDY
TATUNG
TEAC
TECHNICS
TEKNIKA
034
010 034
039 043
034 039 043
031 033 070
019 031 033
034 101
034
006
004 018 026
034 043 063
137 150
031 033
031 033
012 013 015
033 040 066
101
043
012 031 033
043 048 050
INSTANTREPLAY
JCL
JCPENNY
PILOT
PIONEER
PORTLAND
PULSAR
QUARTZ
QUASAR
THOMAS
TMK
TOSHIBA
JENSEN
JVC
008 013 042
047 059 082
112 131
RCA
P A G E 4 8
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming Codes
SAT
Brand
ALPHASTAR DSR
AMPLICA
BIRDVIEW
BSR
CAPETRONICS
CHANNEL MASTER
Codes
123
050
051 126 129
053
Brand
Codes
027 133 134
Brand
Codes
117
071
Brand
Codes
115
128 146
001 081 082
083 084 091
120
PERSONAL CABLE
PHILIPS
PICO
PRESIDENT
PRIMESTAR
PROSAT
RCA
REALISTIC
SAMSUNG
VIEWSTAR
WINEGARD
ZENITH
GENERAL INSTRUMENT 003 004 016
029 031 059
101
139 140
033 037 039
051 057 104
068
105
019 102
030 110 111
072
066 106
043 074
123
053
HITACHI
HOUSTON TRACKER
013 014 015
018 036 055
008 009 012
077
CHAPARRAL
HUGHES
HYTEK
053
CITOH
CURTIS MATHES
DRAKE
054
JANIEL
JERROLD
KATHREIN
LEGEND
LG
LUTRON
LUXOR
MACOM
060 147
061
108
057
255
SATELLITE SERVICE CO 028 035 047
057 085
SCIENTIFIC ATLANTA 032 138
050 145
005 006 007
010 011 052
112 116 141
024 046 056
076
038 040 057
058 093 094
095 096 097
098 099 100
122
SONY
103
STARCAST
SUPER GUIDE
TEECOM
041
DX ANTENNA
ECHOSTAR
132
020 124 125
023 026 075
087 088 090
107 130 137
002 127
016 025 042
043 044 045
048 049 078
079 080 086
101 135 136
062 144
010 059 063
064 065
057
028 124 125
069 070
MEMOREX
NEXTWAVE
NORSAT
PACE SKY SATELLITE 143
PANASONIC
PANSAT
TOSHIBA
UNIDEN
ELECTRO HOME
EUROPLUS
FUJITSU
089
114
017 021 022
060 142
121
DVD
Brand
APEX DIGITAL
DENON
GE
GOLDSTAR
HARMAN KARDON
JVC
LG
Codes
022
020 014
005 006
010 016 025
027
Brand
Codes
025
013
024
002
023
008 017
003 009
Brand
Codes
013
004 026
021
005 006
005 006
011 015
007
Brand
Codes
PHILIPS
PIONEER
PROCEED
PROSCAN
RCA
THOMPSON
TOSHIBA
YAMAHA
ZENITH
005 006
019 008
009 018
010 016 025
MAGNAVOX
MARANTZ
MITSUBISHI
NAD
ONKYO
PANASONIC
012
001 010 016
SAMSUNG
SONY
P A G E 4 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming Codes
CATV
Brand
ABC
Codes
Brand
Codes
Brand
REGAL
REGENCY
REMBRANT
RK
Codes
049 050
057
025
091
Brand
Codes
032 035
012 015 018
086 087 088
089
003 004 039
042 046 052
053
014
005 007 014
024
026
092
007
007
065 090
080 081
019 030
023
020 030 040
057 062 066
032
072
008 022 025
054
052 074
030
049 050 055
052 055
070 077
002 003 004
008 009 010
052 069 074
255
037
033
010 012 064
079
001
028 032
015 028 038
071 073
016 031 037
053
044 047
001
006 012 013
020 065 085
090
034 051 052
063 076
016
VIEWSTAR
LG
ANTRONIK
ARCHER
M-NET
MACOM
MAGNAVOX
SAMSUNG
SCIENTIFIC ATLANTA 003 011 041
030 068
ZENITH
001 060 093
CABLE STAR
CENTURION
CENTURY
CITIZEN
COLOUR VOICE
COMBANO
COMTRONICS
DIAMOND
EAGLE
042 043 045
046
022
030
052
MEMOREX
MOVIE TIME
NSC
SHERITECH
SIGNAL
SIGNATURE
SL MARX
SPRUCER
STARCOM
OAK
030
047 078
002 004 008
009
008 030
067
PANASONIC
PARAGON
PHILIPS
EASTERN
ELECTRICORD
GE
STARGATE
SYLVANIA
TADIRAN
TANDY
TEXSCAN
TOCOM
TOSHIBA
UNIKA
UNITED CABLE
UNIVERSAL
030
017
GEMINI
PIONEER
029 067
039 040 056
001
007 014 024
004 053
005 007 014
024 026 027
GI
POST NEWS WEEK
PRUCER
PTS
GOLDEN CHANNEL
HAMLIN
HITACHI
HOSPITALITY
JERROLD
059
011 048 071
072 073 074
001
PULSAR
RCA
047
P A G E 5 0
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will
have your new TV. Be sure to turn the power off and pull out the power cord before you begin any cleaning.
SCREEN CLEANING
1. Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of
lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s
almost dry, and then use it to wipe the screen.
2. Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.
CABINET CLEANING
1. Use a soft cloth with a mild soap solution to wipe the cabinet.
2. Rinse the cloth and wipe the cabinet again.
3. Let the cabinet air-dry before turning the TV on.
EXTENDED ABSENCE
If you expect to leave your TV dormant for a long time (such as a vacation), unplug the power cord
from the wall power outlet to protect against possible damage from lightning or power surges. If you
use an off-air antenna, you may also want to disconnect it from the back of your TV before leaving.
P A G E 5 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance (Continued)
PICTURE INTERFERENCE
Even though you may be getting cable, the signal may be weak, which means the quality
of your picture may suffer due to other factors. If there are problems with the image on your TV,
consult the Troubleshooting guide on the following pages. You may also want to contact your cable
service provider to determine if the problem is from the cable service.
VIDEO GAMES AND OTHER FIXED-PATTERN DISPLAYS
If you use your TV to play video games or for other uses that involve single, fixed images, such as
a photo-CD player, you should avoid setting the Brightness level too high.
If static images, like network identification icons or patterns, are left on the screen for a long time
period, they may leave a permanent impression on the TV screen. You can reduce the chance of
this happening by
limiting the amount of time you use the fixed-image display, and by reducing the contrast and
brightness levels.
If you unplug your TV, you may have to reset the clock using the Time menu described earlier.
P A G E 5 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Some quick and easy tips for fixing problems yourself.
POSSIBLE SOLUTIONS
SYMPTOM
• Check your antenna connection or location.
• Check your cable input.
Snowy picture and unclear sound.
• Check to see if the TV/VCR button on your VCR has the TV selected.
• Check your antenna direction and/or location.
• Check your cable input.
Multiple images or ‘ghost shadows.’
• Make sure the cable from your antenna to your TV is
properly connected.
The following may cause image problems or distortion:
Electrical appliances, powerful lights, cars, trucks; computers or
portable phones; medical equipment
Interference: Sharp lines across
the screen and unclear sound.
• If possible increase the distance between your TV and the offending appliance,
or shut one of them off.
• Check volume levels.
• Make sure the TV is not Muted.
Normal picture but no sound.
• Try another channel. The problem may be with the broadcast, not your TV.
• Are the Audio cables installed properly?
• Are the wires for external speakers (if you have external speakers)
installed properly?
• Make sure your speakers are turned on in the Audio menu.
• If your audio mode is set to SAP, the program may not have SAP.
• Are you in TV or cable tuning mode, and should be in the other?
• Make sure output channels on all A/V equipment are on the same channel (3 or 4).
• Check that all connections are tight.
No picture and unclear sound.
No picture or sound.
• Is the AC power plugged in?
• Check that your AC power cord outlet works. (Test it by plugging in something
else or try another power outlet.)
• Make sure your brightness and audio controls are set properly.
• Try another channel. The problem may be with the broadcast.
• Check the color settings in the Video menu.
• Try another channel. The problem may be with the broadcast.
No color, but the sound is okay.
• The analog caption option may be in Text mode. Select CC 1, in the analog cap-
tion menu.
Picture has a big black box
on it, but the sound is okay.
Picture has two horizontal
black bars, one on top and
one on bottom.
• Select correct Aspect Ratio in Option menu
Missing Secret Lock Code
• If you forgot your password, when the display asks you to enter the secret code,
press ‘7’, ‘7’, '7’, ‘7’ on the remote control.
P A G E 5 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting (Continued)
SYMPTOM
POSSIBLE SOLUTIONS
Remote control doesn’t work.
• Make sure the batteries are fresh and installed properly.
Menu options can’t be
• Try unplugging your TV for a few minutes,
changed or selected.
then plug it back in.
No picture or sound
when any non-cable source
is selected.
• Check to see if the source equipment has been turned on.
• Make sure that the connections are secure on the back of your TV and on the
source equipment.
Weak or no Stereo Sound
when using a stereo VCR.
• Check to see if all the connections are secure.
• Look in the Audio mode menu to see if all the settings are correct.
• If you are using channel 3 or 4 to view your VCR, stereo sound will not be
available.
Time is incorrect.
• Make sure the time was set initially. Probably power was lost.
• Reset clock manually.
P A G E 5 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
A list of definitions for some of the words found in this guide.
75 OHM RF CABLE
A/V CABLES
The round cable that comes from an off-air antenna or cable service
provider. Each end looks like a hex shaped nut with a wire sticking
through the middle, and it screws onto the threaded jack on the back of
your TV.
Audio/Video cables. Three cables - Right audio (red), Left audio (white),
and Video (yellow). A/V cables are used for stereo playback of videocas-
settes and for higher quality picture and sound from other A/V devices.
A/V DEVICE
ADD
Any device that produces video or sound (VCR, DVD, cable box,
or television).
This function lets you add new channels to the channel list in memory
that you’ll scroll through when using your remote.
AMPLIFIER
ANALOG TV
ANTENNA
An external device that amplifies sound from a television, CD player, VCR,
DVD or other A/V device.
Traditional method of representing a television signal as a replica (analog)
of the original picture and sound.
The physical receiver of television signals sent over the air. A large metal
piece of equipment does not always have to be visible for your home to
be using an antenna.
ASPECT RATIO
The ratio of the horizontal dimension to the vertical dimension of a pic-
ture. Standard television in the U.S. today is generally transmitted and
displayed in a 4:3 aspect ratio. High-Definition television will normally be
formatted in a wider aspect ratio, assumed to be 16:9.
CAPTIONS
A form of subtitling that writes out the dialog for your program on the
screen.
DELETE
This function lets you remove channels that you don’t watch from the
channel list in memory.
DIGITAL TV (DTV)
A new method of representing a television signal as a series of binary
numbers (1s and 0s). This method allows the signal to be manipulated to
eliminate redundancy and dramatically increase picture and sound quality.
DOLBY DIGITAL
Dolby Digital Cinema Sound is made possible by a new digital coding tech-
nique called Dolby AC-3. Dolby AC-3 produces high-quality, 5.1 channel
surround sound which is six discrete separate channels for a full range of
sound. Each channel can carry a different signal simultaneously (front
center, front left, front right, surround left, surround right and subwoofer).
P A G E 5 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary (Continued)
A list of definitions for some of the words found in this guide.
FAVORITE CHANNELS
This function created a customized list of your favorite chan-
nels. You can access this group of channels with the FAV but-
ton on the remote by pressing FAV repeatedly.
INPUT
JACK
Refers to the jack that receives a signal into the TV, VCR or
other A/V device.
A connection on the back of a TV, VCR, or any other A/V
device. This includes the RF jacks and the Audio/Video jacks
that are color-coded.
MODE
The mode determines the type of device (TV, VCR, Cable, etc.)
that the remote is controlling; remote operating mode.
MONO SOUND
OUTPUT
Mono (monaural) sound is one channel of sound. On more
than one speaker, all the speakers play the same audio.
Refers to the jack that sends a signal out of a VCR, DVD, or
other A/V device.
SECOND AUDIO
PROGRAMMING/SAP
Second Audio Programming (SAP) is another, separate, audio
channel available with some programming. Choosing SAP often
refers to listening to audio in another language, such as
Spanish or French.
SIGNAL
SOURCE
Picture and sound traveling through cable, or over the air, to
your television screen.
The term for the equipment that provides audio and video
information to your TV. Antenna, VCR, DVD players, and Cable
Boxes are examples of sources.
STEREO SOUND
TUNER
Stereo (stereophonic) sound refers to audio that’s divided into
right and left sides.
Any device that picks up broadcast signals and turns them into
picture and sound.
P A G E 5 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Specifications
Model
32FZ1DC-UB
Horizontal Size (inches)
Height (inches)
Thickness (inches)
Weight (pounds)
35.86
23.66
21.73
132.3
Power requirement
Television system
Television Channel
AC 120V~ 60Hz
American TV Standard, NTSC-M, Integrated ATSC tuner, 64 & 256 QAM
VHF: 2 - 13
UHF: 14 - 69
CATV: 1 - 135
CADTV: 1 - 135
DTV: 2 - 69
Power consumption (W)
Antenna
210W
75 ohm external terminal for VHF/UHF
Audio Output (W)
Supplied accessories
Screen Aspect Ratio
External input ports
7W x 2
Remote control, batteries 2 size AA (Alkaline battery)
16 : 9
Video/Audio input (4 set)
S-Video input (2)
Component input (2 set)
HDMI/DVI input (1)
Digital audio optical input (DVI)(1)
Digital audio optical output (1)
Calibration port (1)
Cable/Antenna port
Design and specifications are subject to change without prior notice.
P A G E 5 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
P A G E 5 8
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
P A G E 5 9
Download from Www.Somanuals.com. All Manuals Search And Download.
LG COLOR TELEVISION LIMITED WARRANTY – USA
Your LG Color Television will be will repaired or replaced, at LG’s option, if it proves to be defective in material or work-
manship under normal use, during the warranty period ("Warranty Period") listed below, effective from the date ("Date
of Purchase") of original consumer purchase of the product. This warranty is good only to the original purchaser of the
product and effective only when used in the U.S., including Alaska, Hawaii, and U.S. Territories.
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WAR-
RANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED WARRANTY IS
REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. NEITHER THE MANUFACTUR-
ER NOR ITS U.S. DISTRIBUTOR SHALL BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE
WARRANTY PERIOD:
HOW SERVICE IS HANDLED:
LABOR: 90 Days from the Date of Purchase.
PARTS: One Year from the Date of Purchase.
CRT: 2 years from the Date of Purchase.
In-Home Service : Please retain dealer’s dated bill of sale or
delivery ticket as evidence of the Date of Purchase for proof of
warranty, and submit a copy of the bill of sale to the service per-
son at the time warranty service is provided.
Replacement Units and Repair Parts may be new or
factory remanufactured.
Please call 1-800-243-0000 to locate your nearest LG
Authorized Service Center.
Replacement Units and Repair Parts are warranted for
the remaining portion of the original unit’s warranty period.
DAMAGES OF ANY NATURE, INCLUDING WITHOUT LIMITATION, LOST PROFITS, LOST OR CORRUPTED PROGRAMMING OR
DATA, OR ANY OTHER DAMAGE WHETHER BASED IN CONTRACT, TORT, OR OTHERWISE. Some states do not allow the exclu-
sion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above exclusion or lim-
itation may not apply to you. This warranty gives you specific legal rights and you may also have other rights that vary from state to state.
THIS LIMITED WARRANTY DOES NOT APPLY TO:
G damage caused in shipping or transit
G replacement of batteries on the remote control.
G damage (including cosmetic damage), failure, loss or personal
injury due to misuse, abuse, negligence, improper maintenance or
storage, or to acts of nature or other causes beyond our control.
(Causes beyond our control include but are not limited to lightning
strike, power surges, power outages and water damage.)
G repair or replacement of warranted parts by other than an
LG authorized service centers.
G service required as a result of improper installation,including
incorrect or insufficient AC supply (please consult the owner’s
manual for power supply requirements).
G installation or repair of antenna systems, cable converters,
cable company supplied equipment, or other components in
a video system
G set-up or adjustment on consumer controls, or damage
caused by improper adjustments
G damage caused by other system components
G any unit that has been modified or incorporated into any
other product
G units purchased or serviced outside of the U.S.A.
G product where the original factory serial numbers have been
removed, defaced or changed in any way.
G product sold and labeled as “as is, where is” or similar disclaimer.
The cost of repair or replacement under these excluded circumstances shall be borne by the consumer.
CUSTOMER INTERACTIVE CENTER NUMBERS
To obtain Customer Assistance, Product Infor-
mation, or Dealer or Authorized Service Center
location:
Call 1-800-243-0000 (24 hours a day, 365 days a year)
and choose the appropriate prompt from the menu; or
BEFORE CALLING FOR SERVICE:
G Please check your Operating Guide – you may avoid a service call.
G Please have your product model number, serial number, and the date of purchase or original installation available.
G Parts and service in accordance with the LG warranty is our responsibility and will be provided without charge. Other service
requirements will be at the owner’s expense. If you have problems in obtaining satisfactory warranty service, write or call the
LG Customer Interactive Center.
TO CONTACT LG ELECTRONICS BY MAIL:
LG Customer Interactive Center
P. O. Box 240007
201 James Record Road
Huntsville, Alabama 35824
ATTN: CIC
P/N : 3828VA0395F a
Download from Www.Somanuals.com. All Manuals Search And Download.
|