User’s guide
EKE 854.2/804.2/604.2
KC 906.2
with pan recognition
1
3
1
3
5
47I
2
39
0
2
Download from Www.Somanuals.com. All Manuals Search And Download.
For your information...
Content
Carefully read the information in this manual before you use your appliance.
You’ll find important information about safety and how to use, maintain and
service your appliance so that it enjoys a long service life.
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Disposing of the packaging and the old appliance . . . . . . 3
For your information.... . . . . . . . . . . . . . . . . . . . . . . . . . 3
Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Before using the first time. . . . . . . . . . . . . . . . . . . . . . . 4
Your appliance at a glance . . . . . . . . . . . . . . . . . . . . . . 5
If you experience any problems, first be sure to read the chapter titled “What
to do if trouble occurs...”. Usually it's easy to solve minor problems yourself
and avoid unnecessary service costs.
Please keep this manual in a safe place and pass it on to new owners for their
information and safety.
Using the cook top . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Sensor sensivity reset
Switch on a cooking zone (Stand-by-mode)
The cooking setting
Using the automatic boost function
Switching off a cooking zone:
Switching off the cooking surface
Using a frying or dual-circuit cooking zone without the pan recognition
sensor
The following symbols are used in this operating manual:
The warning triangle will alert you about possible health risks or things
that can cause potential damage to your appliance.
[
You'll find useful hints and information when you see this symbol.
F
Warranty
Cooking zone heating indicator
The pan recognition function . . . . . . . . . . . . . . . . . . . . . 7
Deactivate the pan recognition function
This warranty is extended to the original purchaser and succeeding owners for
products purchased for ordinary home use. It does not cover its use in a
commercial situation. Should the appliance be sold by the original purchaser
during the warranty period, the new owner will continue to be protected until
the expiration date of the original purchaser's warranty period. Save your dated
receipt or other evidence of the installation/occupancy date. Proof of original
purchase date is needed to obtain service under warranty. The warranty
applies even if the owner should move during the warranty period.
Re-activate the pan recognition function
The automatic pan size sensor of the dual circuit zone/frying zone
Time limit function (holiday function) . . . . . . . . . . . . . . . 7
Child proof lock (sensor-lock). . . . . . . . . . . . . . . . . . . . . 8
What happens if... . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Selecting pots and pans . . . . . . . . . . . . . . . . . . . . . . . . 8
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Please pay attention to the information about the cleaning scraper
Cleaning the cooking surface
KÜPPERSBUSCH does not assume any responsibility for consequential or
incidental damages. This warranty provides you with certain legal rights. You
may also have other rights which may vary from state to state.
Remove caking
Care of the cooking surface
What Is Covered
For one full year from the date of the original purchase, we will provide parts,
service and labor in your home to repair or replace any part of the cook top
that fails because of a defect in materials or workmanship. This service is
provided free of charge. All warranty service will be provided by our authorized
Customer Care professionals during normal business hours.
What to do if trouble occurs... . . . . . . . . . . . . . . . . . . . . 9
After Sales Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
For technical information and/or
replacement parts, please contact the
What Isn’t Covered
1. Service by an unauthorized agency will not be reimbursed. Likewise, the
warranty doesn't cover any damage or repairs due to service performed by
an unauthorized agency, or by the use of unauthorized parts.
Küppersbusch Customer Care line
at
1-800-459-0844
2. Service visits to teach you how to use the appliance.
For the most efficient assistance,
please have the Model and Serial
numbers for the appliance available.
3. Service visits to correct the installation. You are responsible for providing
electrical wiring and other connecting facilities.
4. Reset circuit breakers or replacement of home fuses.
5. Damage resulting from accident, alteration, misuse, improper installation,
abuse or installation not in accordance with local electrical codes, or
improper storage of the appliance.
6. Repairs due to other than normal household use.
Disposing of the packaging and
the old appliance
Be sure to dispose of the transport packaging properly. Disposal should not
have a negative impact on the environment. Recycling the packaging saves
raw materials and reduces the amount of waste.
Be sure to dispose of your old appliance properly, as well. Even if it can no
longer be used, it still contains useful materials. Before discarding an old
appliance, disconnect the power cord to prevent it from becoming a hazard.
KC 906.2 and EKE Users Guide USA with pan recognition
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety instructions
■
■
■
The cooktop must be built into a countertop opening! Do not use the
appliance if it has not been installed!
extinguisher.
■
Don’t switch the cooking surface on unless you’re using it for cooking.
Never use a cooking zone without a pot or pan set on it. Never use the
appliance to heat a room!
Be sure the appliance is properly installed and grounded by a
qualified technician.
The appliance may only be installed and connected to the power
supply, maintained, and repaired by a qualified electrician in
accordance with safety regulations. Do not repair or replace any part
of the appliance unless specifically recommended in this manual.
Work performed incorrectly puts your safety at risk.
■
■
■
Immediately switch off the cooking zone after using with the respective
minus key and not just by pot recognition.
Never leave the cooking surface unattended at high heat settings.
Boilover can cause smoking and greasy spillovers that may ignite.
Wear proper apparel. Loose-fitting or hanging garments should not
come in contact with the cooking surface. Dish cloths, potholders
and aprons should not be stored near the surface units.
■
This appliance is for residential use only. Use for any other purpose
is at the owner’s risk and could be dangerous. The manufacturer
can’t be held responsible for damage caused by improper use of this
appliance.
■
■
To reduce the risk of burns, ignition of flammable materials, and
spillage due to unintentional contact with the untensil, the handle of
an utensil should be positioned so that it is turned inward, and does
not extend over adjacent surface units.
■
■
■
■
Danger of burning! The cook top becomes hot
during operation. CAUTION: Keep children away
from this appliance.
Use only dry potholders. Moist or damp potholders on hot surfaces
may result in burns from steam. Do not let potholder touch a hot
surface. Do not use a towel or other bulky cloth.
CAUTION! Items of interest to children should not be stored in cab-
inets above a cooktop. A child can be seriously injured by climbing
on a cooktop to reach them.
■ CAUTION! Only certain types of glass, glass/ceramic, ceramic, earthenware,
or other glazed utensils can be used on the range-top without breaking, due
to the sudden change in temperature. Follow the manufacturer’s instruc-
tions!
Do not leave children alone or unattended in the area where the ap-
pliance is in use. They should never be allowed to sit or stand on
any part of the appliance.
Don’t touch the cooking surface or areas near it. The cooking surface
may be hot even though it’s dark in color. Areas near it may become
hot enough to cause burns. During and after use, do not touch the
surface, or let clothing or other flammable materials come in contact
with it until it’s had time to cool.
■
Do not place non-food items on the cooking surface when it's hot.
■
Be careful when working with attachments! The connecting cord
must not come in contact with the hot cooking surface.
■
Do not put plastic on the cooking surface. Things that can melt
(i.e. plastics, foils or sugar), must be kept away from the cooking
surface. Be sure to immediately remove or lift off any melted
item from the hot cooking surface. Use the supplied cleaning
scraper in order to avoid damage to the cooking surface.
■
Use the proper pan size. This appliance is equipped with different
sized surface units. Use flat-bottomed cookware that is large enough
to cover the surface unit heating element. The use of undersized
cookware will leave a portion of the heating element exposed and
direct contact could result in the ignition of clothing. Using a proper
relationship between cookware and burners wil also improve
efficiency. Review “Selecting pots and pans“ on page 7.
Flammable materials should not be stored near surface units.
Don’t put combustible or flammable objects on the cooking top.
They could be ignited if the burners are unintentionally turned on.
■
Clean and remove any burned-on materials. Don’t heat these
materials repeatedly.
■
■
Lime deposits are harmful to the cooking surface.
■
If a wet sponge or cloth is used to wipe spills on a hot cooking area,
be careful to avoid steam burn. Some cleaners can produce noxious
fumes if applied to a hot surface.
■
■
Do not use aluminium foil to line the surface unit drip bowls.
■
Please follow the cleaning and maintenance instructions carefully!
The glass ceramic surface is very durable and can easily withstand
light to medium impacts and loads distributed over large areas. Be
sure to avoid concentrated loads (i.e. spice bottles) from falling on
the surface to avoid cracking or breaking of the cooking surface.
Before using the first time
– Before using the appliance the first time, be sure to clean the cooking sur-
face with a mixture of water and mild detergent on a clean cloth. Then wipe
the surface dry with a non-fluffy cloth.
■ CAUTION! If the cooking surface becomes cracked or fractured, quit
using the appliance immediately. Disconnect the power and call
Customer Service. Cleaning solutions and spills may penetrate the
broken cooktop and create a risk of electric shock.
■
■
■
Never flambé under the cooker hood. The fat in the filter can
ignite!
The connecting cable must not come in contact with the hot cooking
surface.
CAUTION: Overheated greases and oils may ignite themselves.
Prepare meals with greases and oils very carefully and control the
heat. Should fats or oils ignite, do not use water to extinguish them!
Smother the fire or flame or use a dry chemical or foam-type
4
KC 906.2 and EKE Users Guide USA with pan recognition
Download from Www.Somanuals.com. All Manuals Search And Download.
Your appliance at a glance
Using the cook top
[
Read the safety instructions!
EKE 854.1
KC 906.2
Sensor sensivity reset
Important:
Make sure no objects are on the sensors while the sensor sensitivity is
being set.
After initial connection and after a power failure the abbreviations
F
“'%0” appear briefly in the LED displays. Rotating circles are then dis-
played. This means the sensors are being self-tested and the button sen-
sitivity reset simultaneously.
– Acknowledge this display by touching the Off-sensor.
Make sure no objects are lying on the sensors! These symbols are
switched off immediately.
– Otherwise, remove objects and briefly disconnect the cooking zone from the
main power source.
EKE 804.2
Switch on a cooking zone (Stand-by-mode)
Before you start to use a cooking zone, put the cook top into the stand-
by mode.
F
When you turn the cooking surface on, you will hear a short buzzing noise
as it heats. This is design-specific and does not affect the quality and
operation of the appliance.
F
– Press the sensor-button for
approx. 2 seconds.
The LED-display above the sen-
sor lights up and the appliance
is in operation (stand-by mode).
EKE 604.2
The stand-by mode automatically switches itself off,
– if no cooking zone is activated within 20 seconds (after 10 seconds an
acoustic signal will indicate that the appliance will switch itself off after an-
other 10 seconds)
or
– if the appliance is not used 1 minute after starting operation.
The cooking setting
You have 9 cooking settings available.
Cooking setting
Suitable for
1-3
4-5
6-8
9
Heating, warming, browning, defrosting
Steaming, poaching, boiling
Roasting, deep-frying
1
2
3
4
5
6
7
8
Dual circuit cooking zone
Sensor buttons for cooking settings
Off-sensor
Heating large quantities
Stand-by-Sensor
Child proof lock (sensor-lock)
Normal cooking zone
Select the required cooking setting with the plus- or- minus sensor. It will be
indicated in the display.
Normal cooking zones, usably as a frying zone
Frying zone
If you use the minus sensor, you will start with a boost. If you use the plus-
sensor, you start without a boost.
KC 906.2 and EKE Users Guide USA with pan recognition
Download from Www.Somanuals.com. All Manuals Search And Download.
5
When pressing the plus sensor,
the cooking zone starts at cooking
setting 5, without boost.
Switching off a cooking zone:
and
When pressing the minus sen-
sor, the cooking zone starts at
cooking setting 9.
This automatically starts the
automatic boost.
– Press the plus- and -minus sensor at the same time.
The “0” position is visible for about 2 seconds after the appliance switches off.
Switching off the cooking surface
All the cooking zones can be
switched off quickly with the off-
sensor.
Using the automatic boost function
All cooking zones are equipped with an automatic boost function. Maximum
power is used for the boost. The time period of the boost depends on the
selected cooking setting. After the elapsed time, the cooking zone automati-
cally switches back to the selected cooking setting.
If the cooking zone is yet not in use
– Press the minus sensor until the
required cooking setting is dis-
played. The boost function
Using a frying or dual-circuit cooking zone with-
out the pan recognition sensor
switches on automatically.
As a rule, only the smaller cooking zone diameter is heated. However, when
using frying pans and large saucepans, you may decide to switch on the outer
cooking zone circuit.
Switching on the frying or dual-circuit zone:
– Press the cooking zone symbol
next to the plus/minus sensor.
A dot at the bottom right of the
display for the cooking level in-
dicates that the function has
been switched on.
During automatic operation an “A”
lights up in the display alternately
with the selected cooking setting.
– Pressing the cooking zone sym-
bol will once again deactivate
the dual circuit cooking zone or
frying zone.
If you are already using the cooking zone
– Press the plus sensor again
after reaching cooking setting 9.
The automatic boost function is
activated.
Model EKE 854.1 and KC 906.2 only:
To heat a frying pan, you can use the two small,
closely adjacent cooking zones. The temperature
must be controlled via the setting controls for both
cooking zones. We recommend that you set both
cooking zones at the same cooking level.
2 X
Select the required cooking set-
ting.
“A” lights up in the display alter-
nately with the selected cooking
setting.
6
KC 906.2 and EKE Users Guide USA with pan recognition
Download from Www.Somanuals.com. All Manuals Search And Download.
IIf this circle lights us, there is a defect in
the pan recognition function. However, you
can continue to use the cooking zone.
Cooking zone heating indicator
Even though the cooking zone is turned off, an “H”
will appear in the display as long as the cooking
zone is still hot.
The automatic pan size sensor of the dual
circuit zone/frying zone
The pan recognition function
If the pan recognition function is activated, the dual circuit zone has a sensor
to detect the size of the pan being used.
Using the respective minus key, immediately switch off the cooking zone.
Do not turn it off just by pot recognition.
[
When a small pan is placed on the cooking zone, only the inner ring will switch
on. If the entire zone is covered by the pan, both rings will switch on.
If you have deactivated the pan recognition function and you switch off
the cooking zone, the pan recognition function is activated again!
[
Please note that the outer ring must always be completely covered, even if
you are using pans with a rounded base.
Only operate he pan recognition function with utensils made of metal!
F
All cooking zones have a pan recognition function. This means the cooking
zone will recognize whether a saucepan has been put on the cooking zone or
not.
The dual-circuit zone can also detect the saucepan size (see “The automatic
pan size sensor of the dual circuit zone/frying zone” at the next page).
If a suitable pan is put on the cooking zone, “U” is
indicated by the display.
Moving the pan during cooking can cause the outer ring to switch off if it
hasn’t been completely covered.
If no pan or an unsuitable pan is put on the cook-
ing zone, an underlined “U” is indicated.
If the cooking zone is on and there is no pan or
pot on it, the cooking zone automatically switches
itself off after 1 minute. This means you must
switch on the cooking zone to cook again, which
reactivates the pan recognition!
Time limit function
The appliance is equipped with an automatic time limit function. This function
makes sure that the appliance isn’t in operation for an extended period of time.
The time period of the time limit depends on the selected cooking setting, i.e.
The higher the selected cooking setting, the faster the appliance is switched
off.
Deactivate the pan recognition function
When glass pans or other pans that are unsuitable for use with the
saucepan sensor are used, you must deactivate the pan recognition func-
tion. This must be done for each and every cooking zone.
F
Cooking setting
Switching off time after
9
8
7
6
– Press the plus and minus
sensor at the same time be-
fore selecting the cooking
setting.
1 hours
5
4
3 hours
4 hours
and
3
2
5 hours
A circle will appear in the display next to the
selected cooking setting.
1
10 hours
The function to limit operation time works separately for each cooking zone..
KC 906.2 and EKE Users Guide USA with pan recognition
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Child proof lock (sensor-lock) Selecting pots and pans
Operating the sensor lock prevents unauthorized people from using the appli-
ance. In order to activate this lock, the cooking area has to be in operation.
CAUTION! Only certain types of glass, glass/ceramic, ceramic, earthen-
[
ware, or other glazed cookware are suitable for range-top service without
breaking due to the sudden change in temperature. Follow the manufac-
turer's instructions!
Activating childproof lock:
Press the sensor lock (2 seconds).
The childproof lock can be activa-
ted if the cooking area is in oper-
ation. It will only allow the selection
of a lower cooking setting or the
off switch.
Only pots and pans made of metal can be used with the pan recognition
function. To use other kinds of utensils, please deactivate the pan rec-
ognition function.
F
You can save time and power by using ideal pots and pans.
■ Use pots and pans with flat, smooth bottoms.
Uneven bottom surfaces can increase energy usage and the amount of time
needed to start the cooking process..
The lock is indicated by 3 flashing control indicators. .
■ Pans with rough bottom surfaces will scratch the glass-ceramic cooking
area when they are moved around.
■ Use a pan with a diameter at least as large as the cooking area.
Using undersized cookware will expose a portion of the heating element to
direct contact and may result in ignition of clothing.
Be careful: Switching off the cooking area doesn’t deactivate the childproof
lock!
Deactivating the child proof lock:
at once,
after max. 3 Sek.
■ Whenever possible, always place a lid on the pan.
It will help you save a lot of energy. Liquids and foods will only boil over if
the temperature is set too high. The cooking zones enable you to set the
required temperature precisely. With a little practice, you’ll learn how to
choose the perfect cooking settings so nothing will boil over--even when a
lid is on.!
Press the sensors beneath the two left flashing control indicators at once.
For less than three seconds press the sensor under the flashing control indi-
cator on the right.
Note: When the power supply has been interrupted, the childproof lock is no
longer active.
What happens if...
■ ...you press two or more sensor keys – at the same time? (i.e. when
a pan is mistakenly put onto the sensor key?)
No function is activated. An audible signal will sound after 10 seconds. The
appliance will switch off automatically after 20 seconds.
■ ...you continue to press a sensor button even after having set the
highest cooking setting?
An audible signal will sound after 10 seconds. After 20 seconds the appli-
ance will switch off automatically.
■ ...there is a power outage?
The appliance won’t automatically switch on again. If the childproof lock was
activated before the power failure, it will be deactivated.
■ ...the electronics overheat?
The cooktop will automatically switch off. All 4 LED indicators will flash and
a cyclical signal will be heard.
8
KC 906.2 and EKE Users Guide USA with pan recognition
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
What to do if trouble occurs...
Sugar and food containing sugar (i.e. marmalade) and melted plastic
Never unscrew the appliance! Only a qualified technician should perform
repairs!!
[
[
must immediately be removed from the hot cooking surface with the
cleaning scraper. If not, the cooking surface can be ruined while it’s
cooling down.
However, there are some problems that you can handle yourself. First, check
and see if there have been any operating errors. Remember – repairs during
the warranty period are not free of charge if they are caused by operating er-
Steam and/or pressure cleaning machines can’t be used to clean the
appliance! This can damage the unit, and result in the risk of personal rors or non-observance of the following instructions:
[
injury.
Problem
Cooking surface can’t be Regulator or electronic See below: “What is to be
switched off. component is defective. done if...”
Possible cause
Solution
Risk of burning! Make sure the appliance has cooled down before
cleaning. If a wet sponge or cloth is used to wipe spills on a hot surface,
you could be burned by the resulting steam. Be aware that some cleaners
can produce noxious fumes if applied to a hot surface.
[
The LED indicator for the LED indicator defective. Call Customer Service.
cooking level or heat indica-
Risk of burning, as there
is no temperature warn-
ing.
[
Please note the instructions regarding cleansers.
tor does not light up or only
partly lights up.
[
Clean the cooking surface after every use. Food residue that hasn’t been
removed will burn into the surface the next time it’s turned on and then
these incrustations may be permanent.
F
Circulating dash symbols on No problem; this is the If no objects have been lying
all 4 LED displays. normal display after a on or obstructing the sen-
power interruption.
sors, confirm this by pressing
the Off-sensor.
Cleanser residues can cause discoloration the next time you turn on the
cook top. Cloths and sponges that have been used to clean other
surfaces can cause discoloring, too.
F
F
Horizontal dashes that are Failure of electronic Switch off the fuse. Call Cus-
shown on the display run- component.
ning from top to bottom.
tomer Service.
VSR O-FIX-C is the perfect cleanser for glass ceramic. You can get it from
KÜPPERSBUSCH Customer Service.
Cooking area doesn’t heat. Fuse is defective.
Check the fuse and replace, if
necessary.
Do not use any
- aggressive or bleaching cleaning agents that contain active oxygen, chlorine
or corrosive components.
Childproof lock
activated.
Deactivate child proof lock.
Cooking area is defec- Call Customer Service.
tive.
- abrasive or aggressive cleaning or scouring agents like steel wool, soap-filled
steel wool, metal or plastic sponges or similar agents with an abrasive surface.
Inner circuit of the
dual-circuit zone is
defective.
Do not, under any cir-
cumstances, continue to
use the outer circuit
That’s still working! It
will destroy the glass
ceramic surface. Call
Customer Service.
[
Please note the information for the cleaning scraper
CAUTION! Risk of cutting! The blade of the cleaning scraper is very sharp!
[
Always keep the cleaning scraper flat on the
surface and push the caking away.
Individual / all sensors do
not react to touch.
See below: “What is to be
done if...”
Do not scratch the surface with the edge of
[
the scraper and don’t damage the sealing
with the edge.
What do you do if…
... one or more sensors don’t react to touch?
Possible cause: The sensors constantly adapt in sensitivity to ambient
conditions. Unfavorable conditions (i.e. if something is laying on a sensor)
may cause the sensors not to react for several minutes.)
Wait for about 15 minutes or pull the appropriate fuse and then re-in-
sert it. Repeat this procedure if necessary!
Cleaning the cooking surface
– Use the cleaning scraper to remove all food residue and fat splashes from
the hot cooking surface.
– When the cooking surface has cooled, clean it with water and a small
amount of detergent, with a cleanser for glass ceramic surfaces or with
VSR O-FIX-C. A soft brush or a soft sponge can also be used.
The keys have adapted and will react to touch again.
... one or more sensors don’t react to touch despite repeating this
procedure?
Possible cause: Faulty sensor key or component.
– Wipe off the surface with clear water.
– Dry it thoroughly.
If you’ve repeated the procedure and the keys still don’t react, pull the
fuse again and then contact our Customer Service.
Remove caking
... the circle next to the cooking setting lights up?
Possible cause:
Heavy food residue should be soaked first. Use a wet cloth for best results. It
will be easier to remove the food residue.
Defect of the pan recognition function.
If this circle lights up, there is a defect
in the pan recognition function,. You
can nevertheless continue to use the
cooking zone.
Care of the cooking surface
Clean the glass ceramic surfaces with a cleanser to protect it from discoloring,
and reduce the danger of damage from sugar. It can also remove stains and
discoloration
KC 906.2 and EKE Users Guide USA with pan recognition
9
Download from Www.Somanuals.com. All Manuals Search And Download.
After Sales Service
In the event of a problem that you can’t easily fix yourself, or for spare part
service, please contact the Küppersbusch Customer Care line at
.1-800-459-0844
Always have the information from the identification panel handy when
calling Customer Service.
F
The panel is located on the underside of the cook top and on the cover page
of this manual.
Production number
Model
10
KC 906.2 and EKE Users Guide USA with pan recognition
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
KÜPPERSBUSCH
112 N. East Street, Suite C
Tampa, Florida 33602
Telephone: 813-229-7096 Fax: 813-229-0982
Customer Care line: 1 - 800 - 459 - 0844
KÜPPERSBUSCH is a brand of Teka USA, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|