KTI Networks Network Cables Ethernet Media Converter User Manual

Specifications  
Installation  
• Complies with IEEE 802.3 10BASE-T and 10BASE-FL std.  
• Supports UTP cable up to 100 meters (328 feet)  
• Supports fiber optic cable up to 2000 meters (6500 feet)  
• Supports LED indications for the Power, UTP Link,  
UTP Receiving, Fiber Link, and Fiber Receiving status  
• Environment: Temperature 0 - 40oC  
1. Install the media converter with the DC power adapter  
provided. ( +12VDC, 500mA)  
Installation Guide  
Ethernet Media Converter  
Model: KC-10FM  
Humidity 10-90% non condensing  
• Dimension:  
• Power:  
74mmx51mmx20mm  
+12V / 500mA minimum  
2. Connect the power adapter cable to the media con-  
verter before connecting the adapter to the AC outlet.  
Connectors & Cables  
10BASE-T RJ-45 Connector  
One RJ-45 switch is provided for selecting the type of RJ-  
45 connector as follows:  
RJ-45 Switch RJ-45 Type  
3. Do not connect more than two media converters in  
series.  
X position  
II position  
MDI-X  
MDI-I  
DOC. 980422-KC10FM-K  
P/N: 750-0111-001  
RJ-45 Pin MDI-X type  
MDI-I type  
Making Network Connections  
1
2
3
6
Rx+  
RX-  
Tx+  
Tx-  
Tx+  
Tx-  
Rx+  
Rx-  
The following example illustrates a connection from a  
10BASE-T port of one hub to a 10BASE-FL port of  
another hub through a media converter.  
General Description  
KC-10FM Ethernet media converter is designed to be a  
connection interface between a 10BASE-T Ethernet UTP  
cable and 10BASE-FL fiber cable. It features a RJ-45  
connector and a pair of ST fiber optic connectors.  
It allows you to make all UTP connections using common  
straight-through UTP.  
10BASE-T UTP Cable  
Cable type: Category 3, 4 or 5  
The converter complies with IEEE 802.3 10BASE-T and  
10BASE-FL standard and supports a UTP cable up to 100  
meters and a fiber optic cable up to 2000 meters with no  
increasing on the hop count in the network.  
Maximum cable distance: 100 meters (328 feet)  
The following example illustrates a connection from a  
10BASE-T port of one hub to a 10BASE-T NIC on a  
computer through a media converter.  
Fiber Optic Connectors  
Two ST connectors are provided for fiber optic cable  
connection. One is labeled "Tx" for transmitting operation.  
The other is labeled "Rx" for receiving operation.  
Fiber Optic Cable  
Cable type: 62.5/125 mm multimode fiber (recommended)  
Maximum cable distance: 2000 meters (6500 feet)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Installation  
• Complies with IEEE 802.3 10BASE-T and 10BASE-FL std.  
• Supports UTP cable up to 100 meters (328 feet)  
• Supports fiber optic cable up to 2000 meters (6500 feet)  
• Supports LED indications for the Power, UTP Link,  
UTP Receiving, Fiber Link, and Fiber Receiving status  
• Environment: Temperature 0 - 40oC  
1. Install the media converter with the DC power adapter  
provided. ( +12VDC, 500mA)  
Humidity 10-90% non condensing  
74mmx51mmx20mm  
+12V / 500mA minimum  
Installation Guide  
10BASE-T/10BASE-FL  
Ethernet Media Converter  
• Dimension:  
• Power:  
2. Connect the power adapter cable to the media con-  
verter before connecting the adapter to the AC outlet.  
Connectors & Cables  
10BASE-T RJ-45 Connector  
One RJ-45 switch is provided for selecting the type of RJ-  
45 connector as follows:  
RJ-45 Switch RJ-45 Type  
3. Do not connect more than two media converters in  
series.  
X position  
II position  
MDI-X  
MDI-I  
DOC. 980510-KC10FM-NK  
P/N: 750-0111-002  
RJ-45 Pin MDI-X type  
MDI-I type  
Making Network Connections  
1
2
3
6
Rx+  
RX-  
Tx+  
Tx-  
Tx+  
Tx-  
Rx+  
Rx-  
The following example illustrates a connection from a  
10BASE-T port of one hub to a 10BASE-FL port of  
another hub through a media converter.  
General Description  
The 10BASE-T/10BASE-FL Ethernet media converter is  
designed to be a connection interface between a 10BASE-T  
Ethernet UTP cable and 10BASE-FL fiber cable. It features a  
RJ-45 connector and a pair of ST fiber optic connectors.  
It allows you to make all UTP connections using common  
straight-through UTP.  
10BASE-T UTP Cable  
Cable type: Category 3, 4 or 5  
The converter complies with IEEE 802.3 10BASE-T and  
10BASE-FL standard and supports a UTP cable up to 100  
meters and a fiber optic cable up to 2000 meters with no  
increasing on the hop count in the network.  
Maximum cable distance: 100 meters (328 feet)  
The following example illustrates a connection from a  
10BASE-T port of one hub to a 10BASE-T NIC on a  
computer through a media converter.  
Fiber Optic Connectors  
Two ST connectors are provided for fiber optic cable  
connection. One is labeled "Tx" for transmitting operation.  
The other is labeled "Rx" for receiving operation.  
Fiber Optic Cable  
Cable type: 62.5/125 mm multimode fiber (recommended)  
Maximum cable distance: 2000 meters (6500 feet)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The information contained in this document is subject to change  
without prior notice.  
Interpreting LED Indicators  
TRADEMARKS  
Ethernet is a registered trademark of Xerox Corp.  
WARNING:  
This equipment has been tested and found to comply with the  
limits for a Class A digital device, pursuant to Part 15 of the FCC  
Rules. These limits are designed to provide reasonable protec-  
tion against harmful interference when the equipment is  
operated in a commercial environment. This equipment gener-  
ates, uses, and can radiate radio frequency energy and if not  
installed and used in accordance with the instruction manual  
may cause harmful interference in which case the user will be  
required to correct the interference at his own expense.  
NOTICE:  
LED  
Status  
State Interpretation  
Power Power status  
On  
Off  
Converter is on.  
Converter is off.  
Link  
Rx  
Fiber link  
On  
The fiber link is ok.  
Off  
No link or the link is faulty.  
Receiving status Blink  
Off  
Receiving is in operation.  
No fiber receiving.  
(1) The changes or modifications not expressively approved by  
the party responsible for compliance could void the user's  
authority to operate the equipment.  
(2) Shielded interface cables and AC power cord, if any, must  
be used in order to comply with the emission limits.  
CISPR A COMPLIANCE:  
Link  
Rx  
UTP link  
On  
Off  
The UTP link is ok.  
No link or the link is faulty.  
This device complies with EMC directive of the European  
Community and meets or exceeds the following technical  
standard.  
EN 55022 - Limits and Methods of Measurement of Radio  
Interference Characteristics of Information Technology Equip-  
ment. This device complies with CISPR Class A.  
WARNING: This is a Class A product. In a domestic environment  
this product may cause radio interference in which case the  
user may be required to take adequate measures.  
Receiving status Blink  
Off  
Receiving is in operation.  
No fiber receiving.  
CE NOTICE  
Marking by the symbol CE indicates compliance of this equipment  
to the EMC directive of the European Community. Such marking is  
indicative that this equipment meets or exceeds the following  
technical standards:  
EN 55022: Limits and Methods of Measurement of Radio  
Interference characteristics of Information Technology Equip-  
ment.  
EN 50082/1:Generic Immunity Standard -Part 1: Domestic  
Commercial and Light Industry.  
EN 60555-2: Disturbances in supply systems caused by  
household appliances and similar electrical equipment - Part 2:  
Harmonics.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

KTI Networks Switch KGS 510F User Manual
Lantronix Server 900 653 R User Manual
Learning Resources Watch LER 2910 User Manual
LG Electronics Cell Phone VS740 User Manual
Liebherr Freezer 7082 260 00 User Manual
Life Fitness Treadmill PCST DOMHX 01 User Manual
Linksys Network Router WPG11 User Manual
Makita Blower BHX2500 User Manual
M Audio MP3 Player MicroTrack II User Manual
Maverick Ventures Thermometer ET 901 User Manual