Kramer Electronics Stereo Amplifier 106 User Manual

KRAMER ELECTRONICS LTD.  
USER MANUAL  
MODEL:  
106  
Mic Amplifier/DA  
P/N: 2900-000074 Rev 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
Introduction  
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been  
providing a world of unique, creative, and affordable solutions to the vast range of  
problems that confront video, audio, presentation, and broadcasting professionals  
on a daily basis. In recent years, we have redesigned and upgraded most of our  
line, making the best even better!  
Our 1,000-plus different models now appear in 14 groups that are clearly defined  
by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;  
GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:  
Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:  
Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:  
Room Connectivity; GROUP 10: Accessories and Rack Adapters; GROUP 11:  
Sierra Video Products; GROUP 12: Digital Signage; GROUP 13: Audio; and  
GROUP 14: Collaboration.  
Congratulations on purchasing your Kramer 106 Mic Amplifier/DA, which is ideal  
for the following typical applications:  
Public address systems  
Presentation and multimedia audio distribution  
106 - Introduction  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
2
Getting Started  
We recommend that you:  
Unpack the equipment carefully and save the original box and packaging  
materials for possible future shipment  
Review the contents of this user manual  
Go to http://www.kramerelectronics.com to check for up-to-date  
user manuals, application programs, and to check if firmware  
upgrades are available (where appropriate).  
i
2.1  
Achieving the Best Performance  
To achieve the best performance:  
Use only good quality connection cables (we recommend Kramer high-  
performance, high-resolution cables) to avoid interference, deterioration in  
signal quality due to poor matching, and elevated noise levels (often  
associated with low quality cables)  
Do not secure the cables in tight bundles or roll the slack into tight coils  
Avoid interference from neighboring electrical appliances that may adversely  
influence signal quality  
Position your Kramer 106 away from moisture, excessive sunlight and dust  
This equipment is to be used only inside a building. It may only be  
connected to other equipment that is installed inside a building.  
!
2
106 - Getting Started  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
2.2  
2.3  
Safety Instructions  
Caution:  
There are no operator serviceable parts inside the unit  
!
Warning: Use only the Kramer Electronics input power wall  
adapter that is provided with the unit  
Warning: Disconnect the power and unplug the unit from the wall  
before installing  
Recycling Kramer Products  
The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC  
aims to reduce the amount of WEEE sent for disposal to landfill or incineration by  
requiring it to be collected and recycled. To comply with the WEEE Directive,  
Kramer Electronics has made arrangements with the European Advanced  
Recycling Network (EARN) and will cover any costs of treatment, recycling and  
recovery of waste Kramer Electronics branded equipment on arrival at the EARN  
facility. For details of Kramer’s recycling arrangements in your particular country  
106 - Getting Started  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
3
Overview  
The 106 Mic Amplifier / DA is a high−quality distribution amplifier for balanced  
mono microphone signals. It takes one dynamic or condenser microphone input  
and distributes the signal to two high-level balanced mono line outputs, reaching  
27Vpp (22dB).  
The 106 features:  
Three trimmers to adjust the LINE OUT audio level  
A switch for selecting the type of microphone (condenser or dynamic)  
Two balanced mono line outputs for power amplifiers  
4
106 - Overview  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3.1  
Defining the 106 Mic Amplifier/DA  
This section defines the 106.  
Figure 1: 106 Mic Amplifier/DA  
#
Feature  
Function  
1
LINE OUT 2 Trimmer  
Adjusts the LINE OUT 2 audio level  
Insert a screwdriver into the small hole and  
carefully rotate it to adjust the audio level  
2
3
LINE OUT 1 Trimmer  
Adjusts the LINE OUT 1 audio level  
MASTER Trimmer  
Adjusts both the LINE OUT 1 and LINE OUT 2  
audio levels  
4
5
ON LED  
Illuminates when receiving power  
Connects to the microphone  
MIC IN Terminal Block  
Connector  
6
7
8
9
TYPE COND./DYN Selector  
Switch  
Push to select the condenser microphone,  
release to select the dynamic microphone  
LINE OUT 1 Terminal Block  
Connector  
Connects to acceptor 1  
LINE OUT 2 Terminal Block  
Connector  
Connects to acceptor 2  
12V DC  
+12V DC connector for powering the unit  
106 - Overview  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
4
Connecting the 106  
Always switch off the power to each device before connecting it to your  
106. After connecting your 106, connect its power and then switch on  
i
the power to each device.  
To connect the 106 as illustrated in the example in Figure 2:  
1. Connect a mono balanced microphone to the MIC IN terminal block  
connector.  
2. Connect the LINE OUT 1 terminal block connector to a power amplifier  
and/or the LINE OUT 2 terminal block connector to a power amplifier.  
3. Connect each power amplifier to a loudspeaker.  
4. Connect the 12V DC power adapter to the power socket, and connect the  
adapter to the mains electricity.  
5. Adjust the audio level via LEVEL Trimmers, if required.  
Use the LINE OUT 1 trimmer to adjust the line 1 output, use the LINE OUT 2 trimmer to  
adjust the line 2 output, and use the MASTER trimmer to adjust both line outputs.  
Figure 2: Connecting the 106 Mic Amplifier/DA  
6
106 - Connecting the 106  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
5
Technical Specifications  
INPUT:  
1 microphone mono balanced on 3 pin terminal block  
connector  
OUTPUTS:  
2 mono balanced line outputs on 3 pin terminal block  
connectors  
MAX. OUTPUT LEVEL:  
BANDWIDTH:  
27Vpp (22dBm)  
>40kHz  
S/N RATIO:  
81dB  
CONTROLS:  
Mic. Type selector pushbutton, -14dB to +68dB LINE  
OUT trimmers (MASTER trimmer at max.), +37dB to  
+68dB master (LINE OUT trimmer at max.)  
COUPLING:  
Input: AC, Output: DC  
AUDIO THD +NOISE:  
AUDIO 2nd HARMONIC:  
POWER CONSUMPTION:  
OPERATING TEMPERATURE:  
STORAGE TEMPERATURE:  
HUMIDITY:  
0.18%  
0.16%  
12V DC, 220mA  
0° to +40°C (32° to 104°F)  
-40° to +70°C (-40° to 158°F)  
10% to 90%, RHL non-condensing  
12 cm x 7.5 cm x 2.5 cm (4.7" x 2.95" x 0.98", W, D, H)  
0.3 kg (0.66lbs.) approx.  
Power supply (12V, 500mA), mounting bracket  
RK-3T 19” rack adapter  
DIMENSIONS:  
WEIGHT:  
INCLUDED ACCESSORIES:  
OPTIONS:  
Specifications are subject to change without notice at http://www.kramerelectronics.com  
106 - Technical Specifications  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Download from Www.Somanuals.com. All Manuals Search And Download.  
For the latest information on our products and a list of Kramer distributors, visit  
our Web site where updates to this user manual may be found.  
We welcome your questions, comments, and feedback.  
SAFETY WARNING  
Disconnect the unit from the power  
supply before opening and servicing  
!
2900- 000074  
3
P/N:  
Rev:  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Indesit Cooktop K6E32 G User Manual
InFocus Network Card INLITESHOW4 User Manual
Ingersoll Rand Water Pump PD05P XXX XXX B User Manual
JBL Car Speaker VT4880 User Manual
Jensen Universal Remote MWR75 User Manual
Jet Tools Saw JWBS 18X User Manual
JVC CD Player KD APD58 User Manual
Kenwood Car Speaker KFC 6972 User Manual
Kenwood Network Hardware TS 990S User Manual
Kodak Projector 4020 User Manual