KRAMER ELECTRONICS LTD.
USER MANUAL
MODEL:
6810HDxl
SDI/HD-SDI/3G Audio
Embedder/De-embedder
P/N: 2900-000496 Rev 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Figures
6810HDxl – Contents
i
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been
providing a world of unique, creative, and affordable solutions to the vast range of
problems that confront video, audio, presentation, and broadcasting professionals
on a daily basis. In recent years, we have redesigned and upgraded most of our
line, making the best even better!
Our 1,000-plus different models now appear in 11 groups that are clearly defined
by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;
GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:
Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:
Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:
Room Connectivity; GROUP 10: Accessories and Rack Adapters and GROUP 11:
Sierra Products.
Congratulations on purchasing your Kramer 6810HDxl SDI/HD-SDI/3G Audio
Embedder/De-embedder, which is ideal for the following typical applications:
Video broadcast studios for On-Air switching and signal routing
Non-linear editing suites
Video production studios, to connect various sources to acceptors
6810HDxl - Introduction
1
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Getting Started
We recommend that you:
Unpack the equipment carefully and save the original box and packaging
materials for possible future shipment
Review the contents of this user manual
to check for up-to-date user manuals, application programs, and to check if
firmware upgrades are available (where appropriate).
i
2.1
Achieving the Best Performance
To achieve the best performance:
Use only good quality connection cables (we recommend Kramer high-
performance, high-resolution cables) to avoid interference, deterioration in
signal quality due to poor matching, and elevated noise levels (often
associated with low quality cables)
Do not secure the cables in tight bundles or roll the slack into tight coils
Avoid interference from neighboring electrical appliances that may adversely
influence signal quality
Position your Kramer 6810HDxl away from moisture, excessive sunlight and
dust
This equipment is to be used only inside a building. It may only be
connected to other equipment that is installed inside a building.
!
2.2
Safety Instructions
Caution:
There are no operator serviceable parts inside the unit
!
Warning: Use only the Kramer Electronics input power wall
adapter that is provided with the unit
Warning: Disconnect the power and unplug the unit from the wall
before installing
2
6810HDxl - Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
2.3
Recycling Kramer Products
The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC
aims to reduce the amount of WEEE sent for disposal to landfill or incineration by
requiring it to be collected and recycled. To comply with the WEEE Directive,
Kramer Electronics has made arrangements with the European Advanced
Recycling Network (EARN) and will cover any costs of treatment, recycling and
recovery of waste Kramer Electronics branded equipment on arrival at the EARN
facility. For details of Kramer’s recycling arrangements in your particular country
6810HDxl - Getting Started
3
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Overview
The Kramer 6810HDxl SDI/HD-SDI/3G Audio Embedder/De-embedder is a
broadcast quality audio embedder and de-embedder (it embeds and de-embeds
simultaneously) for serial digital video.
The 6810HDxl features:
A maximum data rate of 3Gpbs
1 SDI video and 4 AES/3id inputs
1 SDI video and 4 AES/3id outputs
1 looping video input
Multi-standard operation: SDI (SMPTE 259M and SMPTE 344M), HD−SDI
(SMPTE 292M) and 3G HD−SDI (SMPTE 424M)
Group select buttons to choose the group to embed into or de-embed from
each channel pair
Kramer Equalization & reKlocking™ Technology that rebuilds the digital
signal to travel longer distances
Status indicators: audio group detect, embed/de-embed group select, and
SD/HD lock
5V DC power
3.1
Defining the 6810HDxl SDI/HD-SDI/3G Audio
Embedder/De-embedder
This section defines the 6810HDxl.
4
6810HDxl - Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 1: 6810HDxl SDI/HD-SDI/3G Audio Embedder/De-embedder
#
Feature
Function
1
SD/HD LOCK LED
Illuminates green when an SD signal is detected or blue
when an HD signal is detected
2
3
AUDIO GROUP DETECT
LEDs
Illuminates when an audio group (1 to 4) is detected on
the SDI input stream
Buttons
Press to select the audio group which is to be de-
embedded into the given channels (OUT 1 and 2, OUT
3 and 4)
DE-
EMBEDDER
GROUP
SELECT
4
7-segment Displays the number of the audio group which is de-
LED
embedded into the given channels (OUT 1 and 2, OUT
3 and 4)
5
6
Buttons
Press to select the audio group into which the given
channels (IN 1 and 2, IN 3 and 4) will be embedded
EMBEDDER
GROUP
SELECT
7-segment Displays the audio group into which the given channels
LED
(IN 1 and 2, IN 3 and 4) are embedded
7
SDI IN BNC Connector
Connects to the SDI source
8
SDI LOOP BNC Connector Connects to the input loop acceptor
9
SDI OUT BNC Connector Connects to the SDI acceptor
10
AUDIO OUT FROM DE-
EMBEDDER BNC
Connectors
Connects to the AES/3id audio acceptors (1 to 4)
11
12
AUDIO IN TO EMBEDDER Connects to the AES/3id audio sources (1 to 4)
BNC Connectors
5V DC
+5V DC connector for powering the unit
6810HDxl - Overview
5
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Connecting the 6810HDxl
Always switch off the power to each device before connecting it to your
6810HDxl. After connecting your 6810HDxl, connect its power and
i
then switch on the power to each device.
To connect the 6810HDxl , as illustrated in the example in Figure 2, do the
following:
1. Connect an SD/HD/3G HD-SDI source (such as, an HD/SD digital video
player) to the SDI IN BNC connector.
2. Connect the SDI OUT BNC connector to an SDI and AES/id3 acceptor (such
as, video broadcast equipment).
3. Connect an AES digital audio source (such as, DAT Player 4) to the AUDIO IN
TO EMBEDDER 4 BNC connector (for channel 4).
4. Connect the AUDIO OUT TO DE-EMBEDDER BNC connector (for channel 1)
to an AES digital audio acceptor (such as, DAT Recorder 1).
5. Connect the SDI LOOP BNC connector to an SDI acceptor (such as, an SDI
display).
6. Connect the 5V DC power adapter to the power socket and connect the
6
6810HDxl - Connecting the 6810HDxl
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Operating the 6810HDxl
To operate the 6810HDxl as an embedder:
1. Connect the audio sources to the AUDIO IN TO EMBEDDER connectors.
2. Choose the target group by pressing the EMBEDDER GROUP SELECT
button.
The display cycles through groups 1, 2, 3, 4, and –
The “–“ indicates that no group is chosen and the given channels are not
embedded.
If no audio is connected to the AES inputs, the display shows “–“.
3. The audio channels are embedded from the audio sources into the selected
groups of the SDI data stream.
If audio was already embedded in the groups of the SDI stream, it is replaced by the
audio embedded by the 6810HDxl.
To operate the 6810HDxl as a de-embedder:
1. Connect the AUDIO OUT TO DE-EMBEDDER connectors to the audio
acceptors.
2. Choose the source group by pressing the DE-EMBEDDER GROUP
SELECT button.
The display cycles through groups 1, 2, 3, 4, and –.
The “–“ indicates that no group is chosen and the given channels are muted.
You can scroll only the groups where audio is detected (as indicated by the Audio
Group Detect LEDs)
3. The audio channels are de-embedded from the selected groups of the SDI
data stream to the audio acceptors.
Note: You cannot de-embed the same group for two channels at the same time.
8
6810HDxl - Operating the 6810HDxl
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Technical Specifications
INPUTS:
1 SD/HD/3G HD−SDI with loop (SMPTE 259M, 344M,
292M, 424M), 4 AES/3id all on BNC connectors
OUTPUTS:
1 SD/HD/3G HD−SDI (SMPTE 259M, 344M, 292M,
424M), 4 AES/3id on BNC connectors
SAMPLE RATE CONVERSION:
POWER CONSUMPTION:
OPERATING TEMPERATURE:
STORAGE TEMPERATURE:
HUMIDITY:
48kHz
5V DC, 1.04A
0° to +40°C (32° to 104°F)
-40° to +70°C (-40° to 158°F)
10% to 90%, RHL non-condensing
21.5cm x 16.3cm x 4.4cm (8.6" x 7" x 1.8") W, D, H
1.1kg (2.4lbs)
DIMENSIONS
WEIGHT:
ACCESSORIES:
Power supply
OPTIONS:
RK-1 19” rack adapter
6810HDxl - Technical Specifications
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
For the latest information on our products and a list of Kramer distributors,
visit our Web site where updates to this user manual may be found.
We welcome your questions, comments, and feedback.
Web site: www.kramerelectronics.com
E-mail: [email protected]
SAFETY WARNING
Disconnect the unit from the power
supply before opening and servicing
!
P/N:
Rev:
2900- 000496
5
Download from Www.Somanuals.com. All Manuals Search And Download.
|