Konica Minolta Customer Support:
Konica Minolta Photo World:
Become a member of Konica Minolta Photo World today,
free of charge, and enter the fascinating world of Konica Minolta photography.
Register now, save 29.99 EUR,
get DiMAGE Messenger for free!
© 2005 Konica Minolta Photo Imaging, Inc. under the Berne Convention
and the Universal Copyright Convention.
Printed in Germany
9979 2804 50/12984
INSTRUCTION MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you begin
Thank you for purchasing this digital camera. Please take the time to read through this instruction
manual so you can enjoy all the features of your new camera. Check the packing list before using
this product. If any items are missing, immediately contact your camera dealer.
For proper and safe use
Read and understand all warnings and cautions before using this product.
WARNING
Using batteries improperly can cause them to leak harmful solutions, overheat, or explode which
may damage property or cause personal injury. Do not ignore the following warnings.
• Only use the batteries specified in this instruction manual.
DiMAGE Z20 digital camera
Neck strap NS-DG800
Lens cap LF-243B
Video cable VC-400
USB cable USB-3
• Do not install the batteries with the polarity (+/–) reversed.
• Do not use batteries which show wear or damage.
• Do not expose batteries to fire, high temperatures, water, or moisture.
• Do not attempt to short, or disassemble batteries.
4 AA alkaline batteries
DiMAGE Viewer CD-ROM
“DiMAGE Viewer Manuals“-CD-ROM
DiMAGE Instruction Manual
Konica Minolta International Warranty Certificate
• Do not store batteries near or in metallic products.
• Do not mix batteries of different types, brands, ages, or charge levels.
• Do not charge alkaline batteries.
• When recharging rechargeable batteries, only use the recommended charger.
• Do not use leaking batteries. If fluid from the batteries enters your eye, immediately rinse the eye
with plenty of fresh water and contact a doctor. If fluid from the batteries makes contact with your
skin or clothing, wash the area thoroughly with water.
• Tape over battery contacts to avoid short-circuiting during disposal; always follow local regulations
for battery disposal.
This product is designed to work with accessories manufactured and distributed by Konica Minolta.
Using accessories or equipment not endorsed by Konica Minolta may result in unsatisfactory per-
formance or damage to the product and its accessories.
• Use only the specified AC adapter within the voltage range indicated on the adapter unit. An inap-
propriate adapter or current may cause damage or injury through fire or electric shock.
• Do not disassemble this product. Electric shock may cause injury if a high voltage circuit inside
the product is touched.
• Immediately remove the batteries or unplug the AC adapter and discontinue use if the camera is
dropped or subjected to an impact in which the interior, especially the flash unit, is exposed. The
flash has a high voltage circuit which may cause an electric shock resulting in injury. The contin-
ued use of a damaged product or part may cause injuries or fire.
• Keep batteries or small parts that could be swallowed away from infants. Contact a doctor imme-
diately if an object is swallowed.
Konica Minolta is a trademark of Konica Minolta Holdings, Inc. DiMAGE is a trademark of Konica
Minolta Photo Imaging, Inc. Apple, Macintosh, and Mac OS are registered trademarks of Apple
Computer Inc. Microsoft and Windows are registered trademarks of the Microsoft Corporation. The
official name of Windows is Microsoft Windows Operating System. Pentium is a registered
trademark of the Intel Corporation. Power PC is a trademark of the International Business Machines
Corporation. QuickTime is a trademark used under license. All other brand and product names are
trademarks or registered trademarks of their respective owners.
• Store this product out of reach of children. Be careful when around children not to harm them with
the product or parts.
2
BEFORE YOU BEGIN
3
Download from Www.Somanuals.com. All Manuals Search And Download.
• Do not fire the flash directly into the eyes. It may damage eyesight.
• Do not fire the flash at vehicle operators. It may cause a distraction or temporary blindness which
may lead to an accident.
• Do not use the monitor while operating a vehicle or walking. It may result in injury or an accident.
• Do not use this product in a humid environment, or operate this product with wet hands. If liquid
enters the product, immediately remove the batteries or unplug the AC adapter and discontinue
use. The continued use of a product exposed to liquids may cause damage or injury through fire
or electric shock.
CAUTION
• Do not use or store the product in a hot or humid environment such as the glove compartment or
trunk of a car. It may damage the product and batteries which may result in burns or injuries
caused by heat, fire, explosion, or leaking battery fluid.
• If batteries are leaking, discontinue use of the product.
• The lens retracts when the camera is turned off. Touching the lens barrel while it is retracting may
cause injury.
• Do not use the product near inflammable gases or liquids such as gasoline, benzine, or paint thin-
ner. Do not use inflammable products such as alcohol, benzine, or paint thinner to clean the prod-
uct. The use of inflammable cleaners and solvents may cause an explosion or fire.
• When unplugging the AC adapter, do not pull on the power cord. Hold the adapter unit when
removing it from an outlet.
• Do not damage, twist, modify, heat, or place heavy objects on the AC adapter cord. A damaged
cord may cause damage or injury through fire or electric shock.
• If the product emits a strange odor, heat, or smoke, discontinue use. Immediately remove the bat-
teries taking care not to burn yourself as the batteries become hot with use. The continued use of
a damaged product or part may cause injuries or fire.
• Take the product to a Konica Minolta Service Facility when repairs are required.
• Handling the cord on this product may expose you to lead, a chemical known to the State of
California to cause cancer, and birth defects or other reproductive harm. Wash hands after han-
dling.
• The camera temperature rises with extended periods of use. Care should be taken to avoid burns.
• Burns may result if the memory card or batteries are removed immediately after extended periods
of use. Turn the camera off and wait for it to cool.
• Do not fire the flash while it is in contact with people or objects. The flash unit discharges a large
amount of energy which may cause burns.
• Do not apply pressure to the LCD monitor. A damaged monitor may cause injury, and the liquid
from the monitor may cause inflammation. If liquid from the monitor makes contact with skin,
wash the area with fresh water. If liquid from the monitor comes in contact with the eyes, immedi-
ately rinse the eyes with plenty of water and contact a doctor.
• When using the AC adapter, insert the plug securely into the electrical outlet.
• Do not use if the AC adapter cord is damaged.
• Do not cover the AC adapter. A fire may result.
• Do not obstruct access to the AC adapter; this can hinder the unplugging of the unit in emergen-
cies.
• Unplug the AC adapter when cleaning or when the product is not in use.
4
FOR PROPER AND SAFE USE
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing and rotating images...................................................................................................31
Deleting single images ............................................................................................................31
i+ button ...................................................................................................................................32
Enlarged playback...................................................................................................................33
Advanced recording.............................................................................................................................34
Recording mode display .........................................................................................................34
Macro ......................................................................................................................................35
Program (P) exposure mode ...................................................................................................36
Aperture priority (A) exposure mode.......................................................................................36
Shutter priority (S) exposure mode .........................................................................................37
Manual (M) exposure mode ....................................................................................................38
Movie recording.......................................................................................................................40
Exposure compensation..........................................................................................................41
Focus area selection ...............................................................................................................42
Navigating the recording menus .............................................................................................43
Drive modes ............................................................................................................................45
Self-timer.................................................................................................................................46
Continuous advance ...............................................................................................................47
Progressive capture.................................................................................................................48
Bracketing ...............................................................................................................................49
What is an Ev? ........................................................................................................................50
Image size and image quality..................................................................................................51
Auto DSP.................................................................................................................................53
Digital zoom.............................................................................................................................53
Focus modes...........................................................................................................................54
White balance..........................................................................................................................55
Automatic white balance .................................................................................................55
Preset white balance .......................................................................................................55
Custom white balance.....................................................................................................56
Full-time AF .............................................................................................................................57
Flash mode..............................................................................................................................57
Flash compensation................................................................................................................57
Metering modes ......................................................................................................................58
Camera sensitivity - ISO .........................................................................................................59
Flash range and camera sensitivity.........................................................................................59
Color mode..............................................................................................................................60
Contrast...................................................................................................................................60
Sharpness ...............................................................................................................................61
Custom key function............................................................................................................................62
About this manual
The basic operation of this camera is covered between pages 12 and 33. This section of the manual
covers the camera parts, preparation of the camera for use, and the basic camera operation for
recording, viewing, and deleting images.
Many of the features of this camera are controlled with menus. The menu navigation sections con-
cisely describe how to change menu settings. Descriptions of the settings immediately follow the
navigation sections.
Names of parts ....................................................................................................................................10
Getting up and running........................................................................................................................12
Attaching the strap and lens cap............................................................................................12
Inserting batteries....................................................................................................................13
Battery condition indicator......................................................................................................14
Auto power save .....................................................................................................................14
Connecting the optional AC adapter ......................................................................................15
Changing the memory card.....................................................................................................16
Turning on the camera and displays.......................................................................................17
Setting the date and time........................................................................................................18
Setting the menu language .....................................................................................................19
Basic recording ....................................................................................................................................20
Handling the camera...............................................................................................................20
Using the zoom lens................................................................................................................20
Recording images automatically.............................................................................................21
Basic recording operation.......................................................................................................22
`
Automatic Digital Subject Program Selection.........................................................................23
Focus lock...............................................................................................................................24
Focus range.............................................................................................................................24
Focus signals ..........................................................................................................................25
Special focusing situations .....................................................................................................25
Flash modes............................................................................................................................26
Flash range - auto-recording mode ........................................................................................27
Camera-shake warning ...........................................................................................................27
i+ button ...................................................................................................................................28
Adjusting monitor brightness ..................................................................................................28
Digital subject programs .........................................................................................................29
Basic playback.....................................................................................................................................30
Single-frame playback and histogram display........................................................................30
6
TABLE OF CONTENTS
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Image size (Movie) ...............................................................................................................................64
Frame rate...............................................................................................................................64
Movie file sizes........................................................................................................................64
Movie mode.............................................................................................................................65
A short guide to photography..............................................................................................................66
Advanced playback..............................................................................................................................68
Playing back movies ...............................................................................................................68
Capturing a movie frame.........................................................................................................69
Navigating the playback-mode menu.....................................................................................70
Frame-selection screen...........................................................................................................72
Delete ......................................................................................................................................73
Format .....................................................................................................................................74
Lock.........................................................................................................................................75
Copy and E-mail Copy............................................................................................................76
Slide Show ..............................................................................................................................80
About DPOF ............................................................................................................................82
DPOF setup.............................................................................................................................82
Date imprint.............................................................................................................................83
Index print ...............................................................................................................................83
Viewing images on a television ...............................................................................................84
Setup menu .........................................................................................................................................85
Opening the setup menu.........................................................................................................85
Navigating the setup menu .....................................................................................................86
LCD monitor brightness..........................................................................................................88
Auto power save .....................................................................................................................88
Instant playback......................................................................................................................89
Lens accessory .......................................................................................................................90
Language.................................................................................................................................90
File number (#) memory ..........................................................................................................91
Folder name ............................................................................................................................92
Date and time setup................................................................................................................93
Date imprinting........................................................................................................................93
Reset default ...........................................................................................................................94
Audio signals...........................................................................................................................95
Focus signal ............................................................................................................................96
Shutter FX................................................................................................................................96
Video output............................................................................................................................96
Transfer mode .........................................................................................................................96
Self-timer.................................................................................................................................96
Data-transfer mode..............................................................................................................................97
System requirements ..............................................................................................................97
Connecting the camera to a computer...................................................................................98
Connecting to Windows 98 and 98SE....................................................................................99
Automatic installation ......................................................................................................99
Manual installation.........................................................................................................100
Folder organization................................................................................................................102
Auto power save - data-transfer mode.................................................................................103
Disconnecting the camera ...................................................................................................104
Windows 98 and 98 Second Edition.............................................................................104
Windows Me, 2000 Professional, and XP .....................................................................104
Mac OS..........................................................................................................................105
Changing the memory card .................................................................................................106
Uninstalling the driver software - Windows ..........................................................................107
PictBridge..............................................................................................................................108
Notes on printing errors ........................................................................................................109
Navigating the PictBridge menu ...........................................................................................110
Appendix
.......................................................................................................................................114
Troubleshooting.....................................................................................................................114
Care and storage...................................................................................................................116
Camera care ..................................................................................................................116
Storage ..........................................................................................................................116
Cleaning.........................................................................................................................116
LCD monitor care ..........................................................................................................117
Batteries.........................................................................................................................117
Operating temperatures and conditions........................................................................117
Memory cards................................................................................................................118
Before important events and journeys ..........................................................................119
Copyright .......................................................................................................................119
Questions and service...................................................................................................119
QuickTime system requirements...........................................................................................120
Technical specifications ........................................................................................................122
8
TABLE OF CONTENTS
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Names of parts
* This camera is a sophisticated optical instrument. Care should be taken to keep these surfaces
clean. Please read the care and storage instructions in the back of this manual (p. 116).
Diopter-adjustment dial (p. 17)
Macro button (p. 35)
Viewfinder* (p. 17)
Zoom lever
(p. 20)
Shutter-release button
Flash* (p. 26)
Exposure-mode dial
(p. 21, 29, 36 - 40)
AF window*
Flash-mode
button (p. 26)
Controller
LCD monitor*
Card slot
(p. 16)
Lens*
Access lamp
Menu button
DC terminal (p. 15)
Quick View / Delete button
(p. 30, 31)
Self-timer lamp (p. 46)
USB port/Video-out terminal
(p. 84, 98, 108)
Strap eyelet (p. 12)
Information button (p. 28, 32)
Main switch
Mode switch
The battery-chamber door (p. 13) and tripod socket are located on the bottom of the
body.
10
NAMES OF PARTS
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting batteries
This digital camera uses four AA-size alkaline or Ni-MH batteries. Do not use other types of AA bat-
GETTING UP AND RUNNING
Attaching the strap and lens cap
teries. The camera should be off when replacing batteries.
Always keep the strap around your neck in the event that the camera is accidentally dropped. An
optional leather neck strap, NS-DG1000, is also available from your Konica Minolta dealer.
Availability varies with region.
3
To open the battery-chamber door, slide the lock to the open position (1).
Slide the door to the front of the camera (2) to release the safety catch.
Lift the door to open (3).
Pass the end of the neck strap through the strap eyelet on the cam-
era body (1).
1
2
1
Insert the batteries as indicated on the diagram on the inside of the bat-
tery-chamber door. Confirm the positive and negative battery terminals
are oriented correctly.
Thread the strap through the inside of
the buckle as shown (2). Repeat with
the other end of the strap.
2
Close the battery-chamber door and slide it toward the back of the body
(4) to engage the safety catch. Slide the batter-chamber lock to the close
position (5).
Using your thumb and index finger, pinch the outside tabs
of the lens cap to remove or attach. When the camera is
not in use, always replace the lens cap.
4
5
12
GETTING UP AND RUNNING
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery condition indicator
Connecting the optional AC adapter
This camera is equipped with an automatic battery-condition indicator. When the camera is on, the
battery-condition indicator appears on the monitor. If the monitor is blank, the batteries may be
exhausted or installed incorrectly.
Always turn off the camera before changing between power supplies.
The AC Adapter AC-11 allows the camera to be powered
from an electrical household outlet. The AC Adapter is
recommended when the camera is interfaced with a
computer or during periods of heavy use.
Full-battery indicator - the battery is fully charged. This indicator is displayed for three
seconds on the monitor when the camera is turned on.
Low-battery indicator - battery power is low. The monitor will turn off while the flash
is charging to save power.
Insert the mini plug of the AC adapter into the DC termi-
nal (1).
Insert the AC adapter plug into an electrical outlet.
Low-battery warning - battery power is very low. The monitor indicator is red. The
battery should be replaced as soon as possible. This warning automatically appears
and remains on the monitor until the battery is changed. The monitor will turn off
while the flash is charging to save power. If power falls below this level, the battery-
exhausted message will be displayed just before the camera shuts down. If the low-
battery warning is displayed, movie recording cannot be used.
1
Auto power save
To conserve battery power, the camera turns off displays and unnecessary functions if an operation
is not made within a minute. To restore power, press any button or key, or turn the exposure-mode
dial to another position. The length of the auto-power-save period can be changed in section 1 of
the setup menu (p. 88).
If an operation is not made within approximately 30 minutes, the camera turns off automatically.
Press the main switch to turn on the camera.
14
GETTING UP AND RUNNING
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the memory card
Turning on the camera and displays
Press the main switch to turn the camera on. Pressing the switch again turns
This digital camera is equipped with a internal storage (approximately 14.5MB) so images can be
recorded without a memory card. For increased memory capacity, an SD Memory Card or
MultiMediaCard can be inserted into the camera. When card is inserted, the images are recorded on
the card. For more about memory cards see page 118.
the camera off.
Around the main switch is the mode switch. This switch is used to change
between the recording and playback modes as well as the selecting the
between the monitor and viewfinder display.
Always turn off the camera and confirm the access lamp is not
lit before inserting or removing a memory card; damage and
data loss may result.
Recording mode (Viewfinder display) - the camera can record
images and the monitor is viewed through the viewfinder. The
viewfinder has a built-in diopter. While looking through the
viewfinder, turn the diopter-adjustment dial until the monitor
image is sharp
1
2
Recording mode (Monitor display) - the camera can record images and the
monitor is viewed directly.
1. Insert the memory card all the way into the card slot and release; the card should catch in the
slot. Insert the card so the face is toward the back of the camera. Always push the card in
straight, never at an angle. Never force the card. If the card does not fit, check that it is oriented
correctly.
Playback mode (Monitor display) - images can be played back and edited. The
monitor is viewed directly.
2. To eject a memory card, press the card into the slot and release. The card can then be pulled out.
Take care when removing the card as it becomes hot with use.
A memory card used in another camera may have to be formatted before being used. If the unable-
to-use-card message appears, the card should be formatted with the camera. A memory card can
be formatted in section 1 of the playback menu (p. 74). When a card is formatted, all the data on
the card is permanently erased. If the card-error message appears, press the central button of the
controller to close the window; check the Konica Minolta web site for the latest compatibility infor-
mation:
Camera notes
1
To use the viewfinder in the playback mode, press and hold
the flash mode button (1) and then press and hold the infor-
mation (i+) button (2) until the monitor switches to the
viewfinder position.
North America:
Europe:
2
16
GETTING UP AND RUNNING
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the date and time
Setting the Menu language
After initially inserting batteries, the camera’s clock and cal-
endar must be set. When images are recorded, the image
data is saved with the date and time of recording.
If the clock and calendar have not been set, a message is
displayed for a few seconds each time the camera is turned
on. This message is also displayed if the clock and calen-
dar are reset when the camera is stored without batteries
for a long period.
For customers in certain areas, the menu language may
have to be set. Press the menu button (1) to open the
menu; the appearance of the menu will depend on the posi-
tion of the camera’s controls.
1
2
Navigating the menu is simple. The up/down and left/right
keys of the controller (2) move the cursor and change set-
tings on the menu. The central button of the controller
selects menu options and sets adjustments.
1
Drive m
Image
Quality
Auto D
Digital
Drive mode
Image size
Quality
Auto DSP
Digital zoom
Single
2560x1920
Standard
On
Use the left and right keys of the controller (1) to
select “Yes.” “No” cancels the operation.
Use the right key of the controller to highlight
“SETUP” at the top of the menu.
Set date/time?
Yes
No
Press the central button of the controller to open the
setup menu.
Press the center of the controller to open the
date/time setup screen.
Off
LCDbrightness
Date/Time set
Power save
Inst.Playback
Lens acc.
Use the left and right keys to select the item to be
changed.
Use the down key to highlight the language
menu option, then press the right key.
2005 . 01 . 01
00 : 00
MM / DD / YYYY
Use the up and down keys to adjust the item.
English
Language
Press the central button of the controller to open the
language screen.
Press the central button to set the clock and calen-
dar.
:move
:sel.
:enter
/JPN
Español
Date/Time setup screen
Use the four-way keys of the controller to highlight the
new menu language.
/CHN
English
Deutsch
Français
The date/time setup screen can be opened in section 2 of the
setup menu.
Italiano
Svenska
Press the central button of the controller to set the
language.
18
GETTING UP AND RUNNING
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording images automatically
BASIC RECORDING
This section covers the basic operation of this camera. Thoroughly
familiarize yourself with the operations in this section before moving
on to the other sections in the manual.
Turn the exposure-mode dial to the auto-recording position (1); all camera
operations are now fully automatic. The autofocus, exposure, and imaging
systems will work together to bring beautiful results effortlessly.
While many of the camera’s systems in this mode are automatic. The flash
mode (p. 26) and drive mode (p. 45) can also be changed. Image size and
quality can be set on the auto-recording menu (p. 44, 51-52).
Turn on the camera. Set the mode switch to a recording position.
1
Handling the camera
Metering mode
Camera sensitivity (ISO)
Flash mode
–
–
–
–
–
–
–
–
Multi-segment (fixed)
While using the viewfinder or LCD monitor, grip the camera firmly
with your right hand while supporting the body with your left. Keep
your elbows at your side and your feet shoulder-width apart to hold
the camera steadily. Take care not to cover the lens with your fingers
or the strap.
Auto (fixed)
Autoflash (can be changed*)
Wide focus area (can be changed*)
Autofocus - single-shot AF (fixed**)
Single-frame advance (can be changed*)
Natural Color (fixed)
Focus area
Focus control
Drive mode
Color mode
White balance
Auto (fixed)
Using the zoom lens
The zoom lever controls the lens (1).
* Changes to the flash mode, focus area, or drive mode are reset when the exposure-mode dial is
turned to another position.
** When the sports action subject program is selected with Automatic Digital Subject Program
Selection (p. 23), the camera continues to focus when the shutter-release button is held partway
down (continuous AF).
Zoom scale
Pressing the right (T) side of the lever will
zoom in to the telephoto position of the
lens. Pressing the left (W) side of the
lever will zoom out to the wide-angle
position.
Camera notes
After zooming, the zoom scale is dis-
played briefly. If the digital zoom (p. 53)
is active, the yellow section of the scale
indicates the digital-zoom range.
1
The camera uses the exposure system to control the brightness of the live monitor image. This
is achieved by varying the CCD sensitivity and controlling the aperture. The aperture can
sometimes be heard stopping down or opening up with changes in subject brightness.
20
BASIC RECORDING
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic recording operation
The example uses auto recording. Except for movie recording, the operation for
other exposure modes is the same. Automatic Digital Subject Program Selection is
only available in the auto recording mode.
Automatic Digital Subject Program Selection
Automatic Digital Program Selection chooses between program autoexposure and one of five digital
subject programs. The digital subject programs optimize camera setting for various conditions and
subjects. Automatic Digital Subject Program Selection is only available in auto recording and can be
disabled in the auto-recording menu. For information on individual subject programs, see page 29.
Place the subject anywhere within the focus frame. Make sure the
subject is within the focus range of the lens (p. 24). For very close
subjects, use the macro function (p. 35).
A row of gray indicators at the top on the monitor display will indi-
cate Automatic Digital Subject Selection is active. Place the subject
in the focus frames; the procedure is the same as the basic record-
ing operation described on page 22.
Press the shutter-release button partway down to lock the focus and
exposure. An AF sensor (a) is displayed to indicate the subject.
Automatic Digital Subject Selection will choose the appropriate
exposure mode, see the facing page.
Press the shutter-release button partway down; the AF system will
locate the subject and the Automatic Digital Subject Selection func-
tion will choose a subject program. If no indicators are displayed,
program autoexposure is active. Press the shutter-release button all
the way down to take the picture. Hold the camera steadily when
the sunset subject program is selected as exposures can be long.
The focus signal (b) on the monitor will confirm focus lock. If the
focus signal is red, the camera was unable to locate the subject.
Repeat the previous steps until the signal is white. The shutter
speed (c) and aperture (d) appears and turns black to indicate the
a
b
exposure is locked.
d
c
Press the shutter-release button all the way down to take the pic-
ture.
Program autoexposure (the Digital Subject Program indicators disappear)
The access lamp lights indicating image data is being
written to the memory card or the internal memory.
Never remove or insert a memory card while data is
being saved.
Portrait
Landscape
Sunset
Sports action
Camera notes
The recorded image can be previewed by continuing to hold
down the shutter-release button after the image is captured.
The instant-playback function can also be used (p. 89).
22
BASIC RECORDING
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Focus lock
Focus signals
Focus lock prevents the AF system from focusing. This can be used with off-center subjects or
The focus signal in the lower right corner of the LCD monitor indicates the focus status. The shutter
when a special focusing situation prevents the camera from focusing (p. 25).
can be released even if the camera cannot focus on the subject.
Place the subject within the focus frame. Press and hold the
shutter-release button partway down.
Focus locked.
• The focus signal indicates the focus is locked. The shutter
speed and aperture value change from white to black
indicating the exposure is locked.
• When the focus is set, an AF sensor is displayed on the live
image to indicate the point of focus.
Focus confirmed (P, A, S, and M continuous AF focus mode and sports action digital sub-
ject program). Exposure continuously adjusts.
Cannot focus. The subject is too close or a special situation is preventing the AF system
from focusing.
When using the sports action digital subject program, the camera continually focuses when the
shutter-release button is pressed partway down; the focus frames turn red. Keep the subject within
the red focus frames. Focus lock cannot be used.
Without lifting your finger from the shutter-release button,
recompose the subject within the image area. Press the shutter-
release button all the way down to take the picture.
If the AF system cannot focus, focus lock can be used with object at the same distance as the main
subject or the camera can be focused manually in the Digital Subject Program or program (P) expo-
sure modes (p. 54).
Special focusing situations
The camera may not be able to focus in certain situations. If the autofocus system cannot focus on
a subject, the focus signal will turn red. In this situation, focus-lock on an object at the same dis-
tance as the main subject and then recompose the image on the monitor to take the picture.
Focus range
All distances are measured from the CCD. See page 35
for the marco focus range.
Wide-angle position
0.57m - inf. (1.9ft - inf.)
Telephoto position
The subject in the
focus frame is low in
contrast.
Two subjects at
different distances
overlap in the focus
frame.
The subject is near a
very bright object or
area.
The subject is too
dark.
1.57m - inf. (5.1ft - inf.)
Approximate location of CCD plane
24
BASIC RECORDING
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Flash modes
To change the flash mode, simply press the flash
mode button (1) until the appropriate mode is indicat-
ed.
Flash range - auto-recording mode
The camera controls the flash output automatically. For
well-exposed images, the subject must be within the flash
range. Distance is given from the CCD plane. Because of
the optical system, the flash range is not the same at the
lens’ wide-angle position as it is at the telephoto position.
1
Autoflash - the flash fires automatically in low-light
and backlit conditions.
Wide-angle position
0.57 - 4.7m (1.87 - 15.4 ft)
Telephoto position
Red-eye reduction - multiple flashes are used before
the main flash burst to reduce red-eye; an effect
caused by light reflected from the retina. Use in low-
light conditions when taking photographs of people or
animals. The pre-flashes contract the pupils of the
subject’s eyes.
1.57 - 4.7m (5.15 - 15.4 ft)
Approximate location of CCD plane
If the flash output was sufficient to illuminate the subject, the OK indicator briefly replaces the flash-
mode indicator after the exposure. The access lamp turns red and blinks slowly while the flash is
charging; if battery power is low, the monitor turns off during this period.
Autoflash
Fill-flash - the flash fires with each exposure regard-
less of the amount of ambient light. Fill-flash can be
used to reduce harsh shadows caused by strong
direct light or sunshine.
Autoflash with
red-eye reduction
Camera Notes
If using continuous AF or the sports action subject program with flash, the monitor image
reflects the exposure required for the flash when the shutter-release button is pressed partway
down. This may cause the monitor image to appear dark in low-light situations.
Fill-flash
Slow sync. - flash and ambient light exposures are
balanced; red-eye reduction is used. Use slow sync.
when in dark locations to reveal background details.
Ask your subject not to move after the flash burst; the
shutter may still be open for the background expo-
sure. Because exposures can be long, the use of a tri-
pod is recommended.
Fill-flash. with
red-eye reduction
Slow sync. with
red-eye reduction
Camera-shake warning
If the shutter speed falls below the point where the camera can be
safely hand held, the camera-shake warning appears on the LCD
monitor. Camera shake is slight blurring caused by subtle hand
motion and is more pronounced at the telephoto position of the lens
than at the wide-angle. Although the warning appears, the shutter
can still be released. If the warning appears, place the camera on a
tripod, use the built-in flash, or zoom the lens towards the wide-
angle position until the warning disappears.
Flash cancel
Flash cancel - the flash cannot fire.
Fill-flash
Camera-shake warning
27
26
BASIC RECORDING
Download from Www.Somanuals.com. All Manuals Search And Download.
+ button
Digital subject programs
i
Pressing the information (i+) button changes the monitor display. The display cycles among the stan-
dard display, real-time histogram, and live image only.
Digital subject programs optimize the cam-
era’s exposure, white-balance, and image-
processing systems for specific conditions
and subjects. Simply turn the exposure
mode dial to select the appropriate subject
program; the active subject program is dis-
played in the bottom left corner of the mon-
itor
Subject program indicator
Standard display
Real-time histogram
Live image only
Portrait - optimized to reproduce warm, soft skin tones and a slight defocusing of the
background. Most portraits look best at a telephoto setting; the longer focal length does
not exaggerate facial features and the shallower depth of field softens the background. Use
the built-in flash with strong direct sunlight or backlight to reduce harsh shadows.
The real-time histogram shows the approximate luminance
distribution of the live image. This histogram cannot show
the affect of flash illumination. The histogram of a recorded
image may not show the same distribution as the real-time
histogram.
Information button
Sports action - used to capture action by maximizing shutter speeds. The AF system con-
tinuously focuses; see page 21. When using flash, the subject must be within the flash
range (p. 27). A monopod is more flexible and compact than a tripod when shooting
events.
Adjusting monitor brightness
The monitor image can be made lighter or darker. The
brightness level can be set individually for viewfinder
and direct viewing. Turn the mode switch to the
appropriate position. Press and hold the information
(i+) button to open the LCD brightness screen.
Landscape - optimized to produce sharp, colorful landscapes. Used with bright outdoor
scenery.
Sunset - optimized to reproduce rich, warm sunsets. When the sun is above the horizon,
do not point the camera toward the sun for prolonged periods of time. The intensity of the
sun could damage the CCD. Between exposures, turn off the camera or cover the lens.
Use the left/right keys of the controller to adjust the
brightness; the monitor image changes accordingly.
Press the center of the controller or the menu button
to set the brightness level.
Set LCD brightness
Low
High
Night portrait - for deep, subtle night scenes. The use of a tripod is recommended. When
used with flash, the subject and background exposures are balanced. The flash can only
be used with close subjects such as with a portrait of a person. When using the flash, ask
your subjects not to move after the burst; the shutter will still be open for the background
exposure.
:adjust
:enter
28
BASIC RECORDING
29
Download from Www.Somanuals.com. All Manuals Search And Download.
To display the histogram display, press the up key of the controller. Press the down key
to return to single-frame playback.The histogram shows the luminance distribution of
the image from black (left) to white (right). The 256 vertical lines indicates the relative
proportion of that light value in the image. The histogram can be used to evaluate expo-
sure, but displays no color information.
BASIC PLAYBACK
Images can be viewed in the Quick View or playback
modes. This section covers the basic operations in both
modes. The playback mode has additional functions, see
page 68.
To view images from the playback mode, turn the mode
switch to the playback position (1).
Viewing and rotating images
In Quick View or the playback mode, use the
left/right keys of the controller to scroll through the
images.
To view images from the recording mode, press the Quick
View / delete button (2).
To view images recorded in the internal memory, remove
the memory card from the camera.
1
To rotate a vertical image, press the down key to
cycle through the three positions: 90° counterclock-
wise, 90° clockwise, and horizontal.
2
Single-frame playback and histogram display
Image size (p. 51)
Image quality (p. 51)
Mode
indicator
To return to the recording mode from Quick View,
press the menu button or shutter-release button
partway down.
Aperture value
Shutter speed
Quick View / Delete button
Deleting single images
The displayed image can be deleted. Once deleted, an image cannot be recovered.
Time of
capture
Degree of exposure
compensation (p. 41)
White-balance
setting (p. 55)
Date of capture
To delete the displayed image, press the Quick View /
delete button. A confirmation screen will appear.
Sensitivity
Delete this frame?
setting (p. 59)
Folder name
Lock indicator (p. 75)
DPOF indicator (p. 82)
Frame number/ total number of images
No
Yes
Use the left/right keys to highlight “Yes,” “No” will can-
cel the operation.
Folder number - image file number
Histogram
Internal-memory indicator
Press the central button of the controller to delete the image.
The internal-memory indicator appears when a memory card is not inserted in the
camera.
30
BASIC PLAYBACK
31
Download from Www.Somanuals.com. All Manuals Search And Download.
+ button
Enlarged playback
In single-frame playback in Quick View or the playback mode, a still image can be enlarged up to
i
The information (i+) button controls the display format. Each time the button is pressed, the display
cycles through to the next format: full display, image only, index playback.
6X in 0.2 increments for closer examination.
Full display
With the image to be magnified dis-
played, press the right (T) side of the
zoom lever to activate the enlarged
playback mode. The degree of magnifi-
cation is displayed on the LCD monitor.
Press the right (T) side of the zoom
lever to increase the image magnifica-
tion. Press the left (W) side of the lever
to decrease the magnification.
Image only
Index playback
Use the four-way keys of the controller to scroll the image. When scrolling, the
arrows in the display will disappear when the edge of the image has been reached.
Information button
In index playback, the four-way keys of the controller will move the yellow border. When the image
is highlighted with the border, the date of recording, the lock and printing status, and the frame
number of the image are displayed at the bottom of the screen. The highlighted image can be delet-
ed using the Quick Viiew / delete button (p. 31), or a movie clip can be played by pressing the cen-
tral button of the controller. When the information (i+) button is pressed again, the highlighted image
will be displayed in the single-frame playback mode.
The locator in the top right corner of the monitor indicates the area of the image
being displayed.
The information (i+) button switches between showing the full display and the image
only.
To exit the enlarged playback mode, press the menu button or the central button of
the controller.
32
BASIC PLAYBACK
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Internal-memory indicator
ADVANCED RECORDING
This section cover the advanced recording features of this camera. Read the basic recording sec-
tion before moving on to this section.
The internal-memory indicator appears when a memory card is not inserted in the
camera.
Recording mode display
1. Wide-angle converter indicator (p. 90)
2. Mode indicator
3. Flash-mode indicator (p. 26)
4. Flash-compensation display (p. 57)
5. Sharpness display (p. 61)
Macro
6. Contrast display (p. 60)
Macro mode allows the camera to focus as close as 1 cm (0.4
in.) from the front of the lens or 8 cm (3.1 in.) from the CCD.
The focus range changes with the zoom ‘s focal length, see
below.
7. White-balance indicator (p. 55)
8. Camera-sensitivity (ISO) display (p. 59)
9. Exposure-compensation display (p. 41)
10. Camera-shake warning (p. 27)
11. Exposure-mode indicator (p. 36 - 38)
12. Metering-mode indicator (p. 58)
Press the macro button (1) to select the macro mode. Press the
macro button again to cancel the macro mode.
A. Focus frame
13. Shutter-speed display
The following chart lists the macro ranges. All distances are
measured from the CCD.
B. Spot metering area (p. 58)
14. Aperture display
Macro indicator
15. Macro-mode indicator (p. 35)
16. Focus-mode indicator (p. 54)
17. Date-imprinting indicator (p. 93)
18. Frame counter (p. 52)
Wide-angle position: 8 - 107cm (3.1 - 42.1 in.)
26.5 - 30.8mm: 107 - 237cm (42.1 - 93.3 in.)
Telephoto position: 67 - 207cm (26.3 - 81.5 in.)
1
19. Drive-mode indicator (p. 45)
20. Manual-focus scale (p. 54)
21. Battery-condition indicator (p. 14)
22. Image-quality indicator (p. 51)
23. Image-size display (p. 51)
24. Digital-zoom display (p. 53)
25. Color-mode indicator (p. 60)
Approximate location of CCD
plane
34
ADVANCED RECORDING
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Program (P) Exposure mode
Shutter priority (S) Exposure mode
The program exposure mode controls both the shutter speed and aperture to
The photographer selects the shutter speed and the camera sets the appropriate
ensure correct exposures. This exposure mode allows photographers to shoot
without worry about exposure settings. The shutter speed and aperture values of
the exposure are displayed on the monitor when the shutter-release button is
pressed partway down. If shutter speed and aperture displays turn red, the scene
is beyond the exposure control range of the camera.
aperture to ensure correct exposure. When shutter priority is selected, the shutter
speed on the monitor turns blue and a double arrow indicator appears next to it.
The shutter speed can be set between 1/2000 and 4 seconds. If the shutter speed
is beyond the aperture range, the aperture display will turn red. The flash mode
can be set to fill-flash, fill-flash with red-eye reduction, or slow sync. with red-eye
reduction (p. 26).
Aperture priority (A) Exposure mode
Use the up/down keys of the controller (1) to set the
shutter speed. Press the shutter-release button part-
way down to activate the exposure system; the cor-
responding aperture will be displayed on the moni-
The photographer selects the aperture and the camera sets the appropriate shut-
ter speed to ensure the correct exposure. When aperture priority is selected, the
aperture value on the monitor turns blue and a double arrow indicator appears
next to it. The flash mode can be set to fill-flash, fill-flash with red-eye reduction,
or slow sync. with red-eye reduction (p. 26).
tor.
1
Shooting Tips
Use the up/down keys of the controller (1) to set the
aperture. The aperture has a three stop range. Press
the shutter-release button partway down to activate
the exposure system; the corresponding shutter
The shutter speed and aperture control more than the exposure. The shutter speed determines
how sharp a moving subject is. The aperture controls the depth of field; the area in front of the
camera that appears sharp. For more on exposure controls, see the Short Guide to Photography
on page 66.
speed will be displayed on the monitor.
1
Camera notes
As the lens is zoomed, the maximum aperture will automatically shift. If the aperture value is beyond
the shutter-speed range, the shutter-speed display will turn red on the monitor.
When the shutter speed is one second or longer, the shutter sound indicates both the begining
and end of the exposure.
36
ADVANCED RECORDING
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual (M) Exposure mode
Manual exposure mode allows individual selection of shutter speeds and aper-
tures. This mode overrides the exposure system giving the photographer total con-
trol over the final exposure.
Camera notes
When the shutter speed is one second or longer, the shutter sound indicates both the begining
and end of the exposure.
Use the up/down keys of the controller to change the
shutter speed.
Use the left/right keys of the controller to change the
aperture.
The changes made to the exposure will be visible in the live image on the monitor. The monitor
shutter-speed and aperture display will turn red if the image is significantly underexposed or overex-
posed. If the monitor is black, increase the exposure until the image is visible; decrease the expo-
sure if the monitor is white. When the shutter-release button is pressed partway down, the bright-
ness of the live image may change while the camera focuses.
In manual exposure mode, the auto camera-sensitivity setting will fix the ISO value at 100. The
camera sensitivity can be changed in section 3 of the recording menu (p. 59). The flash mode can
be set to fill-flash, fill-flash with red-eye reduction, or slow sync. with red-eye reduction (p. 26), but
the live image will not reflect the flash exposure.
38
ADVANCED RECORDING
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Movie recording
Exposure compensation
This camera records digital video without audio. Total recording time varies with
The camera exposure can be adjusted to make the final picture lighter or darker by as much as
2Ev in 1/3 increments. Exposure compensation can only be used with Digital Subject Programs,
the P, A, and S exposure modes, and movie recording mode. With movie recording mode, exposure
compensation is reset when the camera is turned off. In Digital Subject Programs, P, A, and S expo-
sure modes, exposure compensation remains in effect until reset.
the image size and frame rate, see page 64. Exposure compensation and the
macro mode can be used. Other changes can be made with the movie recording
menu (p. 44).
Image size
Frame rate
To adjust the exposure, press the left or right controller key;
the exposure-compensation screen appears.
Use the left/right keys of the controller to adjust the exposure-
compensation value. Changes to exposure are visible in the
live image.
Before recording, the frame counter shows the maximum time
in seconds that can be recorded on the next movie clip.
Recording time
Press the shutter-release button partway down or press the
central button of the controller to set the adjustment.
Frame the picture as described in the basic recording operation
section (p. 22). Press the shutter-release button partway down
to set the the focus and exposure. Press the shutter-release
button all the way down and release to start recording.
When adjusting the exposure, the amount of compensation is shown in EV (p. 50). After the setting
is made, the shutter-speed and aperture displays indicate the actual exposure. Because the expo-
sure can be adjusted in fine steps, the shutter speed or aperture value displayed may not change.
When set to any value other than zero, the exposure-compensation indicator remains on the moni-
tor as a warning.
Camera notes
The camera continues to focus during recording. The camera
will continue to record until the recording time is used or the
shutter-release button is pressed again.
Exposure compensation is used
when the camera’s exposure meter is
deceived by high-key or low-key
scenes. In the example, the dark
water caused the camera to overex-
pose the image making it too bright
and washed-out. By compensating
Recording indicator
Remaining time
–2.0Ev
the exposure, detail is brought out in
the leaves, and the stones and water
appear richer.
Internal-memory indicator
–1.0Ev
The internal-memory indicator appears when the memory card is not inserted in
the camera.
Camera exposure
40
ADVANCED RECORDING
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Focus area selection
Navigating the recording menus
Individual focus areas can be selected when recording still images. With auto recording and Digital
Subject Programs, focus area selection is reset when the exposure-mode dial is moved to another
position or the camera is turned off. In P, A, S, and M exposure modes, the selected focus area
remains active until reset.
The recording menu displayed varies with the position of the exposure-mode dial. There
are four menus depending on if auto recording, movie recording, Digital Subject
Programs, or the P,A,S, and M exposure modes are selected. See next page for details.
Pressing the menu button (1) turns the menu on and off. The four-way keys of the controller (2)
move the cursor in the menu. Pressing the central button of the controller enters a setting.
Press and hold the central button of the controller until the three spot focus
areas are displayed.
Activate the menu with the menu button.
Use the left/right keys of the controller to highlight the desired auto-
focus area; the active area is blue.
On the P, A, S, and M menu, use the left/right keys of the controller to highlight the
appropriate menu tab; the menu changes as the tabs are highlighted.
Use the up/down keys to scroll through the menu options. Highlight the option whose
setting needs to be changed.
Press the shutter-release button partway down or press the central
button of the controller to select the area; the other two areas disap-
pear. Only when a focus area has been selected, can the controller
be used for other camera operations.
With the menu option highlighted, press the right controller key; the settings are dis-
played with the current setting highlighted. To return to the menu options, press the left
key.
Take the picture as described in the basic recording section; press
the shutter-release button partway down to lock focus and exposure.
Press the shutter-release button all the way down to take the picture.
Use the up/down keys to highlight the new setting.
2
Once a focus area is selected, it will remain active even after the pic-
ture has been taken. Press and hold the central button of the con-
troller to return to the standard focus frames.
Press the central button of the controller to select the
highlighted setting; some options open a selection
screen.
1
Once a setting has been selected, the cursor will return to the menu options and the new setting
will be displayed. To return to the recording mode, press the menu button.
42
ADVANCED RECORDING
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Drive modes
The drive modes control the rate and method images are captured.
The drive mode is set on all menus except the movie menu. In auto
recording mode, the drive mode is reset to single-frame advance
when the exposure-mode dial is moved to another position or the
camera is turned off. In Digital Subject Programs and P, A, S, and M
exposure modes, the drive mode remains in effect until changed.
Refer to the following sections for descriptions of the drive modes.
Drive mode
Image size
Quality
Auto DSP
Digital zoom
Single
2560x1920
Standard
On
Drive mode
Image size
Quality
Focus mode
Digital zoom
Single
Focus mode
Color mode
Cont. AF
NaturalColor
2560x1920
Standard
Autofocus
Off
Image size
Frame rate
320x240
15fps
Off
White balance
Movie mode
Auto
STD. movie
Single-frame advance - to take a single image each time the shutter-release button is
pressed (p. 22).
Auto-recording menu
Digital Subject Program menu
Self-timer - to delay the release of the shutter. Used for self-portraits.
Movie menu
Continuous advance - to take multiple images when the shutter-release button is
pressed and held.
Progressive Capture - to continuously record when the shutter-release button is pressed
and held. Releasing the button saves the last six images.
Drive mode
Image size
Quality
White balance
Key func.
Single
Focus mode
Full-time AF
Flash mode
Flash comp.
Metering mode
Single AF
On
Autoflash
0
Sensitivity
Digital zoom
Color mode
Sharpness
Contrast
Auto
Off
NaturalColor
Normal
Normal
2560x1920
Standard
Auto
Bracketing - to take a series of three images with differing exposures.
Flash mode
MultiSegment
P, A, S, and M exposure-mode menu
Index to menu functions
Auto DSP, 53
Color mode, 60
Focus mode, 54
Frame rate, 64
Movie mode, 65
Quality, 51
Contrast, 60
Digital zoom, 53
Full-time AF, 57
Image size, 51
Sensitivity, 59
Sharpness, 61
Drive mode, 45
Flash compensation, 57
Flash mode, 57, 26
Image size (movie), 64
Key function, 62
Metering mode, 58
White balance, 55
44
ADVANCED RECORDING
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Self-timer
Continuous-advance mode
Used for self-portraits, the self-timer will delay the release of the shutter for approximately ten sec-
onds or two seconds after the shutter-release button is pressed. The self-timer is set in section 1 of
the recording menus (p. 44). The length of the self-timer delay is set in section 4 of the setup menu
(p. 96).
The continuous-advance drive mode allow a series of
images to be captured while holding down the shutter-
release button. The number of images that can be captured
at one time and the rate of capture depend on the image-
size and image-quality settings. The maximum rate of cap-
ture is approximately 1.0 fps. This drive mode is set in sec-
tion 1 of the recording menu.
Drive mode
Image size
Quality
White balance
Key func.
Single
Self-timer
Continuous
Progressive
Bracketing
1
2
With the camera on a tripod, compose the picture so the
subject is within the focus frames. Press the shutter-
release button partway down to lock the exposure and
focus (1). Press the shutter-release button all the way
down to begin the countdown (2).
Compose the picture as described in the basic recording
operation section (p. 22).
1
2
Press the shutter-release button partway down (1) to lock
the focus exposure for the series.
Because focus and exposure are determined when the
shutter-release button is pressed, do not stand in front of
the camera when taking a self-timer image. Always confirm
the focus with the focus signals before beginning the
countdown (p. 25).
Press and hold the shutter-release button all the way down
(2) to begin taking pictures; focus is locked with the first
frame. When the shutter-release button is pressed and held,
the camera will begin recording images until the maximum
number has been taken or the shutter button is released.
3
The self-timer is counted down on the monitor. During the countdown, the self-timer lamp on the
front of the camera (3) will start to blink and is accompanied by an audio signal. A few seconds
before the exposure, the self-timer lamp will blink rapidly. The lamp will glow steadily just before the
shutter fires. To stop the countdown, press the right (T) side or the left (W) side of the zoom lever.
When using a 10-second delay, the self-timer drive mode is reset to single-frame advance after the
exposure. The audio signal can be turned off in section 3 of the setup menu (p. 95).
If the continuous AF focus mode (p. 54) is selected, the focus and exposure for the series are not
locked. The AF system focuses between each frame.
The use of the built-in flash, the continuous-AF focus mode, or date imprinting (p. 93) reduces the
rate of capture. The maximum number of images that can be captured with different image quality
and size is as follows:
Shooting tips
2560 X 1920
2048 X 1536
1600 X 1200
640 X 480
The self-timer can be used to minimize camera shake with long exposures. When using the
camera on a tripod, photographs of static subjects (landscapes, still-lifes, or close-up pho-
tographs) can be made with the self-timer. Because no contact is made with the camera dur-
ing exposure, there is no risk of camera shake caused by the operator.
Fine
3
4
9
3
7
5
28
45
64
Standard
Economy
11
20
13
46
ADVANCED RECORDING
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Progressive-capture mode
Bracketing
The Progressive-Capture drive mode continuously records
images while holding down the shutter-release button. When
the shutter button is released, the last six images stored in
the camera’s buffer memory are recorded. This drive mode
is set in section 1 of the recording menu. When the red low-
battery warning is displayed, these drive modes cannot be
used. Fine image quality (p. 51) cannot be used in this
mode.
This mode makes a three-image bracket of a scene.
Bracketing is a method of taking a series of images of a sta-
tic subject in which each image has a slight variation in
exposure. The bracketing mode is set in section 1 of the
recording menus.
Drive mode
Image size
Quality
White balance
Key func.
Single
Drive mode
Image size
Quality
White balance
Key func.
Single
Self-timer
Continuous
Progressive
Bracketing
Self-timer
Continuous
Progressive
Bracketing
Immediately after selecting the bracketing option on the
menu, a selection screen is displayed to select the bracket-
ing increment.
Compose the picture as described in the basic recording
operation section (p. 22). Press the shutter-release button
partway down (1) to lock the focus exposure for the series.
Press the left/right keys of the controller to select the brack-
eting increment. Press the central button of the controller to
set the value. To change the increment, select the bracketing
drive mode again with the menu.
1
2
3
Press and hold the shutter-release button all the way down
(2) to begin taking pictures; focus is locked with the first
frame. When the shutter-release button is pressed and held,
the camera will begin recording.
:select
:enter
Compose the picture as described in the basic recording
operation section (p. 22).
1
2
Release the shutter (3) to save the images in the camera
memory. The Progressive Capture records the last six
images saved in the camera’s buffer memory. When a series
is captured, a thumbnail of each image is shown in an index
display while being saved.
Press the shutter-release button partway down (1) to lock
the focus exposure for the series.
Press and hold the shutter-release button all the way down
(2) to make the bracket series; three consecutive images will
be captured. Focus is locked with the first frame.
If the continuous AF focus mode (p. 54) is selected, the focus for
the series is not locked. The AF system focuses between each
frame. The exposure for the series is locked when the shutter-
release button is pressed partway down.
If the continuous AF focus mode (p. 54) is selected, the
focus for the series is not locked. The AF system focuses
between each frame. The exposure for the series is locked
when the shutter-release button is pressed partway down.
The maximum rate of capture is approximately 1.0 fps. The use
of the continuous-AF focus mode reduces the rate of capture.
The built-in flash and date imprinting (p. 93) cannot be used.
48
ADVANCED RECORDING
49
Download from Www.Somanuals.com. All Manuals Search And Download.
The remaining number of frames in the bracket series is dis-
played on the monitor next to the bracketing indicator. If the
memory is filled or the shutter button is released before the
series has completed, the camera will reset and the entire
bracket must be made again. If the red low-battery indicator
appears, the bracketing drive mode is disabled. The flash can-
not be used with the bracketing drive mode.
Image size and image quality
Changing image size affects the number of pixels in each
image. The greater the image size, the larger the file size.
Choose image size based on the final use of the image -
smaller images will be more suitable for web sites whereas
larger sizes will produce higher quality prints.
Number of pixels
(hor. X vert.)
LCD monitor
Number of frames in
bracketing series
2560
2048
1600
640
2560 X 1920
2048 X 1536
1600 X 1200
640 X 480
Frame counter
The order of the bracket series is normal exposure, underexposure, and overexposure. The expo-
sure bracket can be made in 0.3 or 0.5 Ev increments. The larger the number, the greater the differ-
ence in exposure between the images in the bracketed series.
FINE
STD.
Fine - high-quality JPEG image.
Standard - the default setting. (JPEG)
Economy - the smallest file sizes. (JPEG)
Normal
Under
Over
ECON.
Image quality controls the rate of compression, but has no effect on the number of pixels in the
image. The higher the image quality, the lower the rate of compression and the larger the file sizes.
If economical use of memory is important, use the economy mode. Standard image quality is suffi-
cient for normal usage. The fine mode will produce the highest quality image and the largest image
files.
0.3 Ev
bracket
0.5 Ev
bracket
Image size and quality must be set before the picture is taken. Changes are displayed on the LCD
monitor. Changes made on one menu affects all exposure modes except movie. Image size and
quality must be reset manually. See navigating the recording mode menu section on page 43.
When using exposure compensation (p. 41), the bracketing series will be made in relation to the
compensated exposure. Under extreme conditions, one of the bracketed exposures may be inaccu-
rate because it is outside the exposure control range of the camera.
If image size or quality are changed, the frame counter will display the approximate number of
images that can be recorded at that setting. Images with differing sizes and qualities can be record-
ed. The number of images that can be recorded depends on the memory available and the file size
of the images. The actual file size is determined by the scene; some subjects can be compressed
further than others. See the chart on the following page.
+2.0 Ev
+1.0 Ev
0.0 Ev
4X as much light
2X as much light
Calculated exposure
1/2 as much light
1/4 as much light
What is an Ev?
Ev stands for exposure value. A change of
one Ev adjusts the exposure calculated by
the camera by a factor of two.
–1.0 Ev
–2.0 Ev
50
ADVANCED RECORDING
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto DSP
Approximate file sizes.
Drive mode
Image size
Quality
Auto DSP
Digital zoom
Single
2560x1920
Standard
On
Automatic Digital Subject Program Selection can be temporarily dis-
abled in the auto-recording menu. When disabled, the program
exposure mode is active. If the camera is turned off, Automatic
Digital Subject Program Selection is activated.
2560 X 1920
2460KB
2048 X 1536
1600KB
830KB
1600 X 1200
1000KB
530KB
640 X 480
210KB
Fine
Standard
Economy
1260KB
130KB
660KB
440KB
290KB
100KB
Off
Approximate number of images that can be stored on internal storage (14.5MB).
Fine
6
9
14
28
48
71
Digital zoom
Standard
Economy
11
22
17
33
103
155
The digital zoom is activated in the auto-recording, Digital Subject Program, and section 3 of the P,
A, S, and M exposure-mode menus (p. 44).
Approximate number of images that can be stored on a 64MB memory card.
Fine
25
49
94
38
74
61
297
430
645
The digital zoom extends the power of the telephoto position of the optical zoom by up to 4X in
0.1X increments. The transition between the optical zoom and digital zoom is seamless. When the
digital zoom is active, the image magnification is displayed on the monitor and the focus frames
change to a single focus area. Because of the degree of magnification, the use of a tripod is recom-
mended.
Standard
Economy
117
203
138
Camera Notes
The digital zoom is operated by the zoom
lever (1). Press the right (T) side of the
lever to zoom in to the telephoto position
of the lens. When the digital zoom acti-
vates, the image magnification will be
displayed on the monitor. Press the left
(W) side of the lever to zoom out. After
zooming, the zoom scale is displayed
briefly. The yellow section indicates the
digital-zoom range.
Zoom scale
The frame counter indicates the approximate number of images that can be recorded with the
available memory at the camera’s image quality and size settings. If the settings are changed,
the frame counter adjusts accordingly. Because the counter uses approximate file sizes, the
actual image taken may not change the counter or may decrease it by more than one. When
the frame counter displays zero, it indicates no more images at the image size and quality set-
tings can be captured. Changing those settings may allow more images to be saved to the
card.
Magnification
With no memory card in the camera, the frame counter indicates the approximate number of
images that can be recorded with the available internal memory. When a card is inserted, the
frame counter indicates the approximate number of images that can be saved on the card.
Digital-zoom images are interpolated to
the set image size. Some loss of quality
may be evident.
1
52
ADVANCED RECORDING
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Focus modes
White balance
This camera has autofocus and manual focus control. The focus mode is selected separately in the
Digital Subject Program, movie, and P, A, S, and M exposure-mode menus. The selected focus
mode is not reset when the camera is turned off
White balance is the camera’s ability to make different types of lighting appear neutral. The effect is
similar to selecting daylight or tungsten film, or using color compensating filters in conventional
photography. An indicator will be displayed on the monitor if a setting other than auto white-balance
is chosen. White balance is set independently in section 1 of the movie, and P, A, S, and M expo-
sure-mode menus (p. 44).
With the P, A, S, or M exposure modes or movie recording, the autofocus mode can be specified
between single-shot AF (AF-S) and continuous AF (AF-C) in section 2 of the menu (p. 44). Single-
shot AF allows the focus to be locked before recording the image, see the basic recording section.
Continuous AF continually focuses the camera. When capturing still images, the camera continues
to focus when the shutter-release button is held partway down. In movie recording, focus is locked
when the shutter-release button is partway down, but it is continually adjusted during recording.
Automatic White Balance
The automatic white balance compensates for the color temperature of a scene. In most cases, the
auto setting will balance the ambient light and create beautiful images, even under mixed-lighting
conditions. When the built-in flash is used, the white balance is set for the color temperature of the
flash.
Preset White Balance
When focusing manually, a scale shows the approximate
subject distance. The scale changes depending on the
focusing range.
Preset white-balance settings must be set before the
Drive mode
Image size
Quality
image is taken. Once set, the effect is immediately visi-
ble on the LCD monitor.
Cust.set
CustRecall
Auto
Preset
Use the up/down controller keys to focus; the monitor
image is automatically magnified by a maximum of 2.5X
depending on the digital zoom setting. The live image
returns to normal after two seconds, when zooming, or
when the shutter-release button is pressed partway down.
White balance
Key func.
Immediately after selecting the preset white-balance
option on the menu, a selection screen is displayed.
Press the left/right keys of the controller to select the
preset white balance. Press the central button of the
controller to apply it. The following preset options are
available:
When using the shutter-priority, aperture-priority, or
manual exposure modes (p. 36 - 38) with manual
focus, press the central button of the controller to
switch between using the up/down keys to focus or
to adjust the exposure. The active function is indicat-
ed in blue.
:select
:enter
Daylight - for outdoor and sunlit
subjects.
Cloudy - for overcast outdoor scenes.
Fluorescent - for fluorescent lighting: office
ceiling lights.
Tungsten - for incandescent lighting: house-
hold light bulbs.
Flash - for use with the built-in flash.
54
ADVANCED RECORDING
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Custom White Balance
Full-time AF
Custom white-balance allows the camera to be calibrated to a specific lighting condition. The set-
ting can be used repeatedly until reset. Custom white balance is especially useful with mixed-light-
ing or when critical control over color is needed. The object used to make a calibration must be
neutral. A blank piece of white paper is an ideal surface and can easily be carried in a camera bag.
With full-time AF active, the autofocus systems continually focuses to keep the monitor image
sharp. This also reduces the autofocusing time when taking pictures. When the camera is set to
manual focus, full-time AF is disabled. Turning the full-time AF function off can help conserve bat-
tery power. Full-time AF can be turned on and off in section 2 of the P, A, S, and M menus (p. 44).
To calibrate the camera, select custom setup (Cust.set)
from the white balance option in section 1 of the movie,
and P, A, S, and M exposure-mode menus (p. 44); the cus-
tom white-balance calibration screen opens.
Flash mode
Drive mode
Image size
Quality
White balance
Key func.
Focus mode
Full-time AF
Flash mode
Flash comp.
Metering mode
Single AF
On
Autoflash
0
The flash modes can be changed in section 2 of the P, A, S, and M
menus (p. 44). This menu option is used when another function is
assigned to the flash mode button, see page 62 on the custom key
function. For more on flash modes, refer to page 26.
Cust.set
CustRecall
Auto
Preset
Fill the image area with a white object; the object does not
need to be in focus. Press the central button of the con-
troller to make the calibration or press the menu button to
cancel the routine.
MultiSegment
Flash compensation
Flash compensation increases or decreases the flash exposure of
the built-in flash in reference to the ambient exposure by as much
as 2 Ev.
The live view shows the effect of the new white balance
setting. The custom setting will remain in effect until anoth-
er calibration is made or the white-balance setting is
changed.
Focus mode
Full-time AF
Flash mode
Flash comp.
Metering mode
:enter
–2 ~ +2
+0.3
Select the flash compensation option section 2 of the P, A, S, and
M menus (p. 44). Use the up/down keys to adjust the degree of
compensation (1). Press the central controller button to set this
value (2). If any value other than 0.0 is set, an indicator will be dis-
played on the monitor as a warning.
If the custom white-balance setting is required again, select custom
recall from the white-balance option of the menu; the last custom
white-balance setting will be applied to the camera. The same cus-
tom white-balance setting is made and accessed from the movie, P,
A, S, and M exposure modes.
Drive mode
Image size
Quality
White balance
Key func.
Cust.set
CustRecall
Auto
Preset
Positive compensation No compensation
Negative compensation No flash
56
ADVANCED RECORDING
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Flash compensation changes the ratio between the ambient and flash exposures. When using fill-
flash to reduce harsh shadows caused by direct sunlight, flash compensation changes the ratio
between the highlights and shadows. The flash affects the darkness of the shadows without affect-
ing the area illuminated by the sun. By decreasing the flash output with a negative Ev setting, the
shadows receive less light and are deeper, but retain detail that would be lost without the flash.
Using a positive Ev setting will soften or eliminate shadows.
Camera sensitivity - ISO
Sensitivity
Digital zoom
Color mode
Sharpness
Contrast
Auto
Off
NaturalColor
Normal
Normal
Five camera sensitivity settings can be selected: Auto, 50, 100,
200, and 320; the numerical values are based on an ISO equiva-
lent. ISO is the standard used to indicate film sensitivity: the higher
the number, the more sensitive the film. Camera sensitivity is set in
section 3 of the P, A, S, and M menus (p. 44).
Metering modes
Metering mode indicators are displayed on the monitor. The meter-
The auto setting automatically adjusts the camera sensitivity to the light conditions between ISO 50
and 160. When any other setting than auto is used, “ISO” and the set value will be displayed on the
monitor.
ing mode is set in section 2 of the P, A, S, and M menus (p. 44).
Focus mode
Full-time AF
Flash mode
Flash comp.
Metering mode
Single AF
On
Autoflash
0
A specific sensitivity setting can be selected. As the ISO value doubles, the camera sensitivity dou-
bles. Like grain in silver-halide film that increases with speed, noise increases with sensitivity in digi-
tal imaging; an ISO setting of 50 will have the least noise and 320 will have the most. An ISO setting
of 320 may allow the camera to be hand-held in low-light conditions without the need of a flash.
Multi-segment metering: uses 256 segments to measure
luminance and color. This data is combined with distance
information to calculate the camera exposure. This advanced
metering system will give accurate worry-free exposures in
almost all situations.
MultiSegment
Center weighted: a traditional metering method in film cameras. The system measures light
values over the entire image area with emphasis given the central region.
Flash range and camera sensitivity
The flash range is measured from the CCD. Because of the optical system, the flash range is not
Spot metering: uses a small area within the image to calcu-
late the exposure. A small circle appears in the middle of the
live image indicating the measuring area. The spot allows
precise exposure measurements of a particular object with-
out being influenced by extremely bright or dark areas within
the scene.
the same at the lens’ wide-angle position as it is at the telephoto position.
ISO setting
Flash range (wide angle)
Flash range (telephoto)
AUTO
50
0.57 - 4.7m (1.87 - 15.4ft.)
0.57 - 2.7m (1.87 - 8.9ft.)
0.57 - 3.8m (1.87 - 12.4ft.)
0.57 - 5.3m (1.87 - 17.4ft.)
0.57 - 6.7m (1.87 - 22.0ft.)
1.57 - 4.7m (5.15 - 15.4ft.)
1.57 - 2.7m (5.15 - 8.9ft.)
1.57 - 3.8m (5.15 - 12.4ft.)
1.57 - 5.3m (5.15 - 17.4ft.)
1.57 - 6.7m (5.15 - 22.0ft.)
100
200
320
58
ADVANCED RECORDING
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Color Mode
Sharpness
Sharpness accents or softens details in an image in three levels:
hard (+), normal, and soft (–). This can be set in section 3 of the P,
A, S, and M menus (p. 44).
The color mode controls whether a still image is color or black
and white. This must be set before the image is recorded. The
color mode is set in section 3 of the P, A, S, and M menus and
section 2 of the movie menu (p. 44). The live image reflects the
selected color mode. The color mode has no effect on image file
size.
Vivid color
Black & White
Sepia
Sensitivity
Digital zoom
Color mode
Sharpness
Contrast
Auto
Off
NaturalColor
Normal
Normal
Any changes made are applied to the live image, but may be diffi-
cult to see. However, when viewed with a computer, the changes
will be evident. If any level except normal is selected, an indicator
appears on the monitor as a warning.
Natural Color reproduces the colors in the scene faithfully. This
mode uses no monitor indicator when active. Vivid Color
increases the saturation of the colors in the scene. Black &
White produces neutral monochrome images. The sepia mode
creates warm-tone monochrome images.
Contrast
This function increases or decreases the contrast of the scene in three levels: high (+), normal, and
low (–). This can be set in section 3 of the P, A, S, and M menus (p. 44). Any changes made are
applied to the live image. If any level except normal is selected, an indicator appears on the monitor
as a warning.
Normal
Sharpness: soft
Sharpness: hard
Contrast: normal
Contrast: low
Contrast: high
60
ADVANCED RECORDING
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Custom Key function
The function assigned to the flash-mode button can be
selected among the flash mode, drive mode, white bal-
ance, focus mode, color mode, and sensitivity. This can be
set in section 1 of the P, A, S, and M menus (p. 44). The
flash mode can also be changed in section 2 of the P, A, S,
and M menus.
Drive mode
Image size
Quality
White balance
Key func.
When selecting the bracketing drive mode, or preset
white balance, a selection screen appears. Use the
left/right keys of the controller to display the bracket-
ing increment or preset white balance, and press the
central button of the controller to select it.
Flash mode
:select
:enter
After selecting the custom key function option on the
menu, press the central button of the controller to display
the selection screen. Use the four-way keys of the con-
troller to select the function. Press the central button of the
controller to set the custom key function. Pressing the
menu button cancels the operation without changing the
custom key function.
Flash mode
Drive mode
White balance
Focus mode
Color mode
Sensitivity
When selecting custom white balance, the calibration
screen appears. Fill the frame with a white object and
press the central button of the controller to calibrate
the camera.
Selection screen
:enter
Pressing the flash-mode button changes the function set in the
menu. Press the central button of the controller or press the
shutter-release button partway down to apply the setting.
62
ADVANCED RECORDING
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Image size (movie)
Image size
Frame rate
White balance
Movie mode
320x240
15ps
Auto
Movies can be recorded at two sizes: 640x480 and 320x240. The
larger the image size, the higher the image quality and the larger
the file sizes. Image size is set in section 1 of the movie menu (p.
44).
The writing speed of the memory card may prematurely end the recording of a movie clip. Test the
card before important events. Check the Konica Minolta web site for the latest compatibility infor-
mation:
North America:
Europe:
STD. movie
Frame rate
Movies can be recorded at two frame rates: 15 fps and 30 fps. 640x480 size image can only be
recorded at 15fps. The higher the frame rate, the smoother the moving image and the larger the file
sizes. Frame rate is set in section 1 of the movie menu (p. 44).
Movie mode
The movie mode option selects the type of movie recorded. Standard produces a normal movie
clip. Night Movie uses high camera sensitivity to record under low light levels; camera sensitivity
will automatically increase in low light. Image quality can be lower with Night Movies because of the
higher sensitivity. The movie mode is set in section 1 of the movie menu (p. 44).
Movie file sizes
If image size or frame rate is changed, the frame counter displays the approximate number of sec-
onds that can be recorded. The total time that can be recorded is determined by the available mem-
ory and the recording rate. The actual file size is determined by the scene; some subjects can be
compressed further than others.
Approximate recording rate
Image size
Frame rate
640 X 480
-----
320 X 240
670KB/s
340KB/s
30 fps
15 fps
540KB/s
Approximate number of seconds that can be stored on internal storage (14.5MB).
30 fps
15 fps
-----
21 seconds
43 seconds
27 seconds
Approximate number of seconds that can be stored on a 64MB memory card.
30 fps
15 fps
-----
91 seconds
116 seconds
183 seconds
64
ADVANCED RECORDING
65
Download from Www.Somanuals.com. All Manuals Search And Download.
A SHORT GUIDE TO PHOTOGRAPHY
Photography can be a rewarding pursuit. It is a broad and disciplined field that can take years to
master. But the pleasure in making photographs and the joy of capturing a magical moment cannot
be compared. The guide is an introduction to some basic photographic principles.
The shutter controls not only exposure, but also
the ability to stop motion. Fast shutter speeds are
used in sport photography to stop action. Slow
shutter speeds can be used to show the flow of
motion such as water cascading over a waterfall.
The use of a tripod is recommended with slow
shutter speeds.
The lens aperture controls not only expo-
sure, but also depth of field; the area
between the closest object in focus and
the furthest object in focus. The larger the
aperture value, the greater the depth of
field. The smaller the aperture value, the
shallower the depth of field. The required
shutter speed for the exposure increases
with the aperture value. Usually landscape
photographs use a large depth of field
(large aperture value) to keep the fore-
ground and background in focus, and por-
traits use a shallow depth of field (small
aperture value) to separate the subject
from the background.
Depth of field also changes with focal
length. The smaller the focal length, the
greater the depth of field; the longer the
focal length, the shallower the depth of
field.
The change in aperture and shutter speed is not apparent in the live image. Unlike film cameras,
test photographs can be taken and immediately viewed. For critical work, take a test photograph at
the set aperture or shutter speed and view the result in Quick View (p. 30). The image can be delet-
ed if not acceptable and another test image can be taken at a different setting.
66
A SHORT GUIDE TO PHOTOGRAPHY
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Capturing a movie frame
ADVANCED PLAYBACK
A single frame from a movie clip can be copied and saved as a still image. The copied
image has the same image size as the original movie.
The basic functions in this mode are described in the basic playback section on pages 30 through
33. This section covers how to playback movie clips as well as the advanced function on the play-
back menu. Movie clips can be played back in Quick View.
During playback, press the center button of the con-
troller to pause the movie playback at the point to
capture the frame. When the movie is paused, the
left/right keys can be used to jog the clip to display
the correct frame.
Playing back movies
Play
Use the left/right keys of the controller to display the
movie.
Pause Rew Fwd
Press the center of the controller to play back the
movie clip.
Press the up key of the controller to capture the
frame. Before the frame is captured, a confirmation
screen appears. Choosing “Yes” executes the opera-
tion, “No” cancels it.
Press the controller to pause the movie playback;
press the controller again to resume the playback.
Play
Rew Fwd
Press the display button to view the movie with or
without the guidance bar.
Pause Rew Fwd
Saved as PICT0015.JPG.
OK
The file name of the captured image is displayed.
Press the center button of the controller to complete
the operation.
During playback, the left/right keys rewind and fast
forward the recording.
Play
Rew Fwd
To cancel the playback, press the menu button.
68
ADVANCED PLAYBACK
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Navigating the playback menu
Pressing the menu button (1) turns the menu on and off. The four-way keys of the controller (2)
To delete recorded images (p. 73).
Delete
Format
Lock
–
–
–
–
To format the memory (p. 74).
move the cursor in the menu. Pressing the central button of the controller enters a setting.
To protect images from deletion (p. 75).
To copy files to the internal memory or memory card (p. 76).
Copy
Activate the menu with the menu button.
Use the left/right keys of the controller to highlight the appropriate menu tab; the menu
changes as the tabs are highlighted.
To play back images automatically (p. 80).
Slide show
Playback
Duration
Repeat
–
–
To select the images for the Slide Show (p. 80).
To specify how long each image is played back (p. 80).
To repeat the Slide Show presentation automatically (p. 80).
Use the up/down keys to scroll through the menu options. Highlight the option whose
setting needs to be changed.
5 sec.
Off
With the menu option highlighted, press the right controller key; the settings are dis-
played with the current setting highlighted. If “Enter” is displayed, press the center of
the controller to continue.
To select images for DPOF printing (p. 82).
DPOF set
–
To print the date with the DPOF images (p. 83).
To create an index print with the DPOF order (p. 83).
To copy and resize images to be e-mailed (p. 79).
Date imprint Off
Use the up/down keys to highlight the new setting.
Index print
E-mail copy
–
–
Press the central button of the controller to select the
highlighted setting.
Refer to the following sections for descriptions of the menu options.
2
Once a setting has been selected, the cursor will return to the
menu options and the new setting will be displayed. To return to
the playback mode, press the menu button.
1
70
ADVANCED PLAYBACK
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Frame-selection screen
Delete
When a marked-frames setting is chosen on a menu, the frame selection screen will appear. This
screen allows multiple images to be chosen.
Deleting permanently erases the file. Once
deleted, a file cannot be recovered. Care
should be taken when deleting images.
Delete
Format
Lock
–
–
–
–
The left/right keys of the controller moves the yellow
border to select the image.
Copy
Single, multiple, or all files can be deleted in section 1 of the play-
back menu (p. 71). To delete images in the internal memory,
remove the memory card from the camera. The delete option has
three settings:
The up key of the controller selects the frame; when
selected, an indicator appears next to the image. The
down key deselects the image removing the indicator.
:move
:enter
:sel.
This
frame
The file displayed or highlighted in the playback mode is deleted.
All unlocked files are deleted.
The garbage can indicates the image is
selected for deletion.
The key indicates the image is locked or
selected to be locked.
All
frames
The printer icon indicates the image is
selected for DPOF printing. The number of
copies is shown on the right.
The check indicates the image is selected
for the slide show or to be copied.
To delete multiple files. When this setting is chosen, the frame-selection screen is dis-
played. Use the left/right keys of the controller to highlight the first file to be deleted.
Pressing the up key marks the thumbnail with the delete indicator. To deselect a file for
deletion, highlight it with the yellow border and press the down key; the indicator disap-
pears. Continue until all the files to be deleted are marked. Press the central button of
the controller to continue (the confirmation screen appears), or press the menu button
to cancel the operation and return to the playback menu. On the confirmation screen,
highlighting and entering “Yes” deletes the marked files.
Marked
frames
Press the central button of the controller to complete the operation.
The menu button cancels the screen and any operation made.
Movie file
E-mail copy file
Indicators may be displayed on the right of each index
image to indicate movie and E-mail copy files.
Before a file is deleted, a confirmation screen appears. Choosing
“Yes” executes the operation, “No” cancels it.
Delete
–
Delete this frame?
Yes
The delete function will only erase unlocked files. Locked files
must be unlocked before they can be deleted.
No
C
72
ADVANCED PLAYBACK
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Format
Lock
Single, multiple, or all files can be locked. To lock images in the internal memory, remove the memo-
ry card from the camera.
When a memory card or the camera’s internal memory is formatted, all
data is erased.
A locked file cannot be deleted by either the playback menu functions or the QV/delete button.
However, the formatting function (p. 74) will erase all files whether locked or not. Important images
should be locked. The lock function is in section 1 of the playback menu (p. 71). The lock option
has four settings:
The formatting function is used to erase all data on a memory card
or in the camera’s internal memory. To format the internal memory,
remove the memory card from the camera.
Delete
Format
Lock
–
–
–
–
Before formatting, copy the data to a computer or storage device.
Locking images will not protect them from being deleted when the
memory is formatted. Always format the memory using the cam-
era; never use a computer.
Copy
This
The file displayed or highlighted in the playback mode is locked.
frame
All
frames
All files on the memory card or in the internal memory are locked.
When the format option is selected and entered in section 1 of the
playback menu (p. 71), a confirmation screen appears. Choosing
“Yes” formats the memory, choosing “No” cancels the formatting
operation. A screen appears to indicate the memory has been for-
matted.
To lock or unlock multiple files. When this setting is chosen, the frame-selection screen
is displayed. Use the left/right keys of the controller to highlight the file to be locked.
Pressing the up key marks the file with the lock indicator. To unlock a file, highlight it
with the yellow border and press the down key; the lock indicator disappears. Continue
until all the files to be locked are marked. Press the central button of the controller to
lock the marked thumbnails, or press the menu button to cancel the operation and
return to the playback menu.
Delete
Format?
Yes
–
Marked
frames
No
C
Unlock
all
A memory card used in another camera may have to be formatted before being used. If the unable-
to-use-card message appears, the card should be formatted with the camera. If the card-error mes-
sage appears, press the central button of the controller to close the window; check the Konica
Minolta web site for the latest compatibility information:
All files on the memory card or in the internal memory are unlocked.
North America:
Europe:
74
ADVANCED PLAYBACK
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Copy and E-mail Copy
Copy
When the image(s) to be copied are selected, a message screen is displayed. The appearance of
the screen varies depending if a memory card is inserted or not. The messages are highlighted dur-
ing the copying procedure.
Delete
Format
Lock
The copy function in section 1 of the playback menu (p.
71) makes exact copies of image or movie files and can
store the copied data on another memory card or in the
internal memory.
E-mail Copy in menu section 3 makes a standard 640 X
480 (VGA) JPEG copy of an original still image so that it
may be easily transmitted by e-mail.
DPOF set
Date print
Index print
E-mail copy
–
Off
–
Copy
When a memory card is inserted:
–
Copy
E-mail copies can only be copied to the original memory
source.
Change card.
Remove memory card to
Copy to internal memory.
Copying . . .
To copy or E-mail copy the images in the internal memory, remove the memory card from the cam-
era. When a copy function is used, a folder is created for the files (p. 102); copy files are placed in a
folder with a name ending in CP, and E-mail Copy images are placed in a folder ending in EM. The
same folder is used to store copies until the number of images exceed 9,999. Copies of locked
images are unlocked. DPOF information is not copied.
Copying completed.
enter
The copy function has three menu options and E-mail copy function has two:
To copy from one memory card to another.
This
To copy the file displayed or highlighted in the playback mode.
frame
When the change-card message is highlighted, remove
the camera’s memory card and insert the card to which
the image should be copied. Press the central button of
the controller to continue or the menu button to cancel
the copy operation.
All
To copy all the files in the internal memory. (Copy function only)
frames
To copy single or multiple files. When selected, the frame-selection screen will appear;
highlight the file to be copied with the yellow border and then press the up key of the
controller to mark it with the check indicator. To deselect a file to be copied, highlight
the selected thumbnail and press the down key; the check disappears. Continue until all
the files to be copied are marked. Press the central button of the controller to continue,
Marked
frames
To copy from a memory card to the internal memory.
or press the menu button to cancel the operation and return to the playback menu.
When the change-card message is highlighted, remove
the camera’s memory card. Press the central button of
the controller to continue or the menu button to cancel
the copy operation.
Up to approximately 13MB of data can be copied. If too many images have been selected, a warn-
ing will appear and the copy routine will be canceled. Divide the number of images into two or three
batches. The amount of data can be converted into E-mail copies depends on the amount of free
memory remaining.
76
ADVANCED PLAYBACK
77
Download from Www.Somanuals.com. All Manuals Search And Download.
When a memory card is not inserted:
E-mail Copy
When the image(s) to be converted to an e-mail file are selected, the copy
routine begins and a screen appears indicating the name of the folder con-
taining the copied images; press the central button of the controller to
return to the menu.
Copy
Copied to 102KM_EM.
OK
Insert memory card.
Copying . . .
Copying completed.
To copy captured movie frames, the image size must be equal to or small-
er than the frame image size.
enter
To copy from the internal memory to a memory card.
When the insert-memory-card message is highlighted,
insert the memory card to which the image should be
copied. Press the central button of the controller to con-
tinue or the menu button to cancel the copy operation.
Camera Notes
The copy-unsuccessful message appears when one or all of the images could not be copied.
Check the memory card or the internal memory to see which files were copied and then repeat
the procedure for the uncopied images.
After the copy-completed message is highlighted, a screen indicates the
name of the folder containing the copied images; press the central con-
troller button to return to the menu.
Copied to 101KM_CP.
OK
78
ADVANCED PLAYBACK
79
Download from Www.Somanuals.com. All Manuals Search And Download.
To display all the images recorded in the internal memory,
remove the memory card from the camera.
Slide Show
Slide show
Playback
Duration
Repeat
–
–
Section 2 of the playback menu controls the slide-show function. This function automatically dis-
plays all still images and movie clips on the memory card or in the camera’s internal memory in
order. The menu has the following options:
5 sec.
Off
The controller can be used to control the presentation during
playback.
To start the slide-show presentation. Highlight “Enter” and press the cen-
tral button of the controller to start the slide show.
Slide show
Enter
Press the central button of the controller to
pause and restart the slide show presenta-
tion.
All frames To select all the images on the memory card or in the internal memory to
be displayed in the slide-show presentation.
To select specific images to be displayed in the slide-show presentation.
When this setting is chosen, the frame-selection screen is displayed. Use
the left/right keys of the controller to highlight the image to be included
in the presentation. Pressing the up key will mark the image with a check
The left/right keys advance to the next still
image or return to the previous one. During a
movie, the keys forward or rewind the clip
Playback
Marked
frames
indicator. To deselect a marked image, highlight it with the yellow border
and press the down key; the check disappears. Continue until all the
images have been edited. Press the controller to set the marked frames,
or press the menu button to cancel the operation and return to the play-
back menu.
Press the menu button to cancel the presen-
tation.
Camera Notes
The presentation can be viewed without
image information. Before opening the play-
back menu, press the information (i+) button
to turn off the information display.
To select the period each still image is displayed during the slide show.
Duration
Repeat
1 - 60s.
On / Off
Selecting “On” causes the slide show to repeat until it is canceled using
the menu button. “Off” ends the slide show presentation and returns to
the playback menu when all the images have been displayed once.
80
ADVANCED PLAYBACK
81
Download from Www.Somanuals.com. All Manuals Search And Download.
When the this-frame or all-frames setting is chosen, a screen appears requesting the number of
copies of each image; a maximum of nine copies can be ordered. Use the up/down keys of the
controller to set the required number of copies. If the all-frames setting was used to create a print
order, any additional images recorded afterwards will not be included in the order.
About DPOF
This camera is supported by DPOF™ version 1.1. The DPOF (Digital Print Order Format) allows
direct printing of still images from digital cameras. After the DPOF file is created, the memory card
is simply taken to a photofinishing service or inserted into the memory-card slot of DPOF compati-
ble printers. When a DPOF file is created, a misc. folder is automatically created to store it (p. 102).
DPOF files created with another camera will be canceled. After the pictures have been printed, the
DPOF file will still remain on the memory card or in the internal memory and must be canceled man-
ually.
DPOF setup
DPOF information is not copied with images. To create a DPOF file for copied images, select the
DPOF-set menu again.
The DPOF-set menu option is used to create an order for standard prints from still images on the
memory card or in the camera’s internal memory. To select images in the internal memory, remove
the memory card from the camera. Print orders are created in section 3 of the playback menu (p.
71). The orders set in this menu can be printed with PictBridge compatible printer (p.113). The print
menu option has four settings:
Date IMPrint
This
frame
To print the date of capture with each image with a DPOF compatible printer, turn the section 3
menu option on. To cancel date imprint, simply turn the option off. How and where the date is print-
ed varies with the printer.
To create a DPOF file for the displayed or highlighted image.
All
To create a DPOF file for all images on the memory card or in the internal memory.
frames
Index Print
To chose a group of images to be printed or when the number of copies of each image
varies. When selected, the frame selection screen appears. Use the left/right keys of the
controller to highlight an image to be printed. Pressing the up key will mark the image
with the print indicator. The number next to the indicator shows the number of copies
that will be printed. Pressing the up key increases the number of copies, pressing the
down key decreases the number. A maximum of nine copies can be ordered. To dese-
lect an image for printing, press the down key until the number of copies reaches zero
and the print indicator disappears. Continue until all the images to be printed are
marked. Press the central button of the controller to create the DPOF file, or press the
menu button to cancel the operation and return to the playback menu.
To create an index print of all the images on the card or in the inter-
nal memory, select “On” in the index print option in section 3 of the
playback menu. To cancel an index print, simply change the setting
to “Off.”
Marked
frames
If an index-print order is created, any additional images saved after-
wards will not be included in the index print. The number of images
printed per sheet differs between printers. The information printed
with the thumbnails can vary.
Camera Notes
DPOF files and images can be printed directly from the camera with a DPOF compatible
PictBridge printer, see page 108.
Cancel
all
To delete the DPOF file.
82
ADVANCED PLAYBACK
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing images on a television
SETUP MENU
The setup menu is used to control the camera’s functions and operation. The navigating the setup
menu section covers the operation of the menu. The section is followed by detailed descriptions of
the settings.
It is possible to view camera images on your television. The camera has a video-out terminal to
make the connection using the supplied Video cable VC-400. The camera is compatible with the
NTSC and PAL standards. The video-output setting can be checked and set in section 4 of the
setup menu (p. 96). To view images recorded in the internal memory, remove the memory card from
the camera.
Opening the setup menu
The setup menu is opened from the other menus. It can be accessed from any of the recording or
playback menus.
1. Turn off the television and the camera.
2. Insert the small plug of the video cable into the camera’s
video-out terminal. The arrow mark on the plug should face
the back of the camera.
Drive m
Image
Quality
Auto D
Digital
Use the right key of the controller to highlight setup
tab at the top of the menu.
Drive mode
Image size
Quality
Auto DSP
Digital zoom
Single
2560x1920
Standard
On
3. Plug the other end of the video cable into the video input
terminal on the television.
4. Turn the television on.
Off
5. Change the television to the video channel.
2
Press the central button of the controller to open the
setup menu.
6. Turn the camera’s mode dial to the playback position and
turn on the camera. The camera’s monitors will not activate
when the camera is attached to a television. The playback-
mode display will be visible on the television screen.
LCDbrightness
Power save
Inst.Playback
Lens acc.
–
7. View images as described in the playback section.
1 min.
Off
None
English
Reverse the procedure to return to the original
menu. Pressing the menu button closes the menu
and returns to the recording or playback modes.
Language
Setup menu
84
ADVANCED PLAYBACK
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Navigating the setup
Menu
To set monitor brightness (p. 88).
LCDbrightness
Power save
Inst.Playback
Lens acc.
–
See page 85 on how to open the menu. The four-way keys of the controller (1) move the cursor in
the menu. Pressing the central button of the controller enters a setting.
To set the auto power save period (p. 88).
To play back a still image after it is recorded (p. 89).
Specified when using a lens accessory (p. 90).
To set the menu language (p. 19).
1 min.
Off
None
English
Use the left/right keys of the controller to highlight the appropriate menu tab; the menu
changes as the tabs are highlighted.
Language
Use the up/down keys to scroll through the menu options. Highlight the option whose
setting needs to be changed.
To activate file number memory (p. 91).
To select the folder name format (p. 92).
To set the camera’s clock and calendar (p. 93, 18).
To activate date imprinting (p. 93).
File # memory
Folder name
Date/Time set
Date imprint
Date imprint
Off
Std. form
–
Off
With the menu option highlighted, press the right controller key; the settings are dis-
played with the current setting highlighted. If “Enter” is displayed, press the center of
the controller to continue.
Use the up/down keys to highlight the new setting.
To reset camera functions (p. 94).
Reset default
Audio signals
Focus signal
Shutter FX
–
1
1
1
To change or turn off audio signals (p. 95).
To change or turn off the focus signal (p. 96).
To change or turn off the shutter sound effect (p. 96).
Press the central button of the controller to select the highlighted setting. Once a setting
has been selected, the cursor will return to the menu options and the new setting will be
displayed.
Close the menu with the menu button.
To switch video output between NTSC and PAL (p. 96).
To specify camera use with a computer or printer (p. 96).
To change the selt-timer delay period (p. 96).
Video output
Transfer mode
Self-timer
NTSC
Data storage
10 sec.
1
86
SETUP MENU
87
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD monitor brightness
Instant playback
Monitor brightness can be adjusted in 11 levels.
Brightness can be set individually for viewfinder and
direct viewing in the recording mode. Turn the mode
switch to the appropriate position before opening the
brightness option in section 1 of the setup menu (p. 87).
Also see page 28.
An image can be displayed on the monitor after it is captured.
When used with the continuous-advance or progressive-capture
drive modes (p. 47, 48), the images in the series are played back in
a six-frame index display. Instant playback is activated section 1 of
the setup menu (p. 87). A playback period of two or ten seconds
can be selected. To cancel the playback and save the image
before the end of the playback period, press the shutter-release
button partway down.
Set LCD brightness
Use the left/right keys of the controller to adjust bright-
ness, the monitor image changes accordingly. Press the
central button of the controller to set the level.
Low
High
Camera Notes
Single still images can be previewed immediately after being captured without
instant playback active. Simply continue to hold the shutter-release button down
after taking the picture to display the image. Release the shutter button to end the
playback.
:adjust
:enter
Auto power save
To conserve battery power, the camera will shut down if no operation is made within a certain peri-
od. The length of the auto-power-save period can be changed to 1, 3, 5, or 10 minutes. When the
camera is connected to a computer, the auto-power-save period is fixed at ten minutes. Auto power
save is set in section 1 of the setup menu (p. 87).
88
SETUP MENU
89
Download from Www.Somanuals.com. All Manuals Search And Download.
Lens accessory
File number (#) memory
This camera is compatible with the optional Wide-angle Converter
ZCW-200. This 0.7X wide-angle converter reduces the focal length
of the zoom lens’ wide-angle position giving it the equivalent of a
26mm lens on a 35mm camera.
If file number memory is selected, when a new folder is created or
a new memory card or memory location is used, the next image
recorded will have a file number one greater than the last file
saved. If the new card contains an image with a greater file num-
ber, the new image will be assigned a file number one greater than
the greatest on the card.
File # memory
Folder name
Date/Time set
Date imprint
Date imprint
Off
Std. form
–
Off
When the converter is mounted, the lens accessory option in sec-
tion 1 of the setup menu should be set to “WideConvertr.” An indi-
cator (W) appears in the top left corner of the monitor as a warn-
ing. The optical zoom is automatically set to the wide-angle posi-
tion. The optical zoom is disabled.
If the file number memory is disabled, the image file number is
reset to 0001 when saved in a new folder, card or memory loca-
tion. File number memory is activated in section 2 of the setup
menu.
Language
The language used in the menus can be changed in section 1 of the setup menu.
90
SETUP MENU
91
Download from Www.Somanuals.com. All Manuals Search And Download.
Folder name
Date and time setup
All recorded images are stored in folders on the memory card or in the camera’s
internal memory. Two folder-name formats are available in section 2 of the setup
menu, standard and date.
It is important to accurately set the clock. When a still image or a movie clip is recorded, the date
and time of the recording are saved with the image and are displayed during playback or can be
read with the supplied DiMAGE Viewer software. The date format that is displayed or imprinted can
be changed: YYYY/MM/DD (year, month, day), MM/DD/YYYY (month, day, year), DD/MM/YYYY
(day, month, year). See page 18 for instructions on how to set the clock and calendar.
100KM027
(Standard)
Standard folders have an eight character name. The initial folder is named
100KM027. The first three digits are the folder’s serial number, which will increase
by one each time a new folder is created. The next two letters refer to Konica
Minolta, and the last three numbers indicate the camera used; 027 indicates a
DiMAGE Z20.
Date imprinting
The date of recording can be printed directly on the image. The
imprinting function must be activated in section 2 of the setup menu
(p. 87) before the image is taken. Once activated, the date will con-
tinue to be imprinted until the function is reset; a yellow bar is dis-
played behind the frame counter to indicate the imprinting function
is active.
A date folder name also starts with the three digit serial number and is followed by
one register for the year, two register for the month, and two registers for the day:
101YMMDD. The folder 10150325 was created in 2005 on March 25th.
10150325
(Date)
With the date folder format selected, when an image is recorded, a new folder with the day’s date is
created. All images recorded that day are placed in that folder. Images recorded on a different day
are placed in a new folder with the corresponding date. If the file number memory function is off (p.
91), when a new folder is created, the serial number in the image-file name is reset to 0001. If file
number memory function is on, the serial number in the image-file is one greater than the last image
saved. For more information on folder organization and file names, see page 102.
Date-imprinting indicator
The date is imprinted in the lower right corner of the image
when viewed horizontally. It is printed directly on the pho-
tograph writing over the image information. The date can
be imprinted in three formats: year / month / day, month /
day / year, and day / month / year. The date and date for-
mat are set in section 2 of the setup menu (p. 87).
Camera Notes
Every time a still image is recorded, it is stored with an exif tag that contains the date and time
of recording as well as shooting information. This information can be viewed with the camera
in the Quick View or playback mode, or on a computer with the DiMAGE Viewer software.
92
SETUP MENU
93
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback menu
Playback (Slide Show)
Duration (Slide Show)
Repeat (Slide Show)
Date print
Reset default
All frames
5 seconds
No
p. 80
p. 80
p. 80
p. 83
p. 83
This function affects all modes. When selected, a confirmation screen appears; choosing “Yes”
resets the following functions and settings, “No” cancels the operation.
Recording mode
Focus area
Off
Wide frames
p. 42
p. 28
p. 41
p. 26
p. 45
p. 51
p. 51
p. 23
p. 53
p. 54
p. 55
p. 62
p. 57
p. 57
p. 58
p. 59
p. 60
p. 61
p. 61
Index print
No
Monitor display
Exposure compensation
Flash mode
Standard
0.0
Setup menu
LCD brightness
Auto-power-save period
Instant playback
Lens accessory
File number (#) memory
Folder name
Autoflash (Fill-flash in A, S, M modes)
Normal
p. 88
p. 88
p. 89
p. 90
p. 91
p. 92
p. 93
p. 95
p. 96
p. 96
p. 96
p. 96
Drive mode
Single-frame advance
1 minute
Image size
2560 X 1920
Off
Image quality
Standard
None
Auto Digital Subject Selection
Digital zoom
On (Auto recording mode)
Off
Off
Standard
Focus mode
Autofocus / Single-shot AF
Date imprinting
Audio signals
Off
White balance
Custom key function
Full-time AF
Auto
1
Flash mode
Off
Focus signals
1
Shutter FX
1
Flash compensation
Metering mode
Camera sensitivity (ISO)
Color mode
0.0
Transfer mode
Self-timer
Data storage
10 sec.
Multi segment
Auto
Natural color
Normal
Normal
Audio signals
Sharpness
Contrast
Every time a button is pressed, an audio signal gives a positive
confirmation of the operation. The audio signals can be turn off in
section 3 of the setup menu (p. 87). The tone of the signal can also
be changed.
Reset default
Audio signals
Focus signal
Shutter FX
–
1
1
1
Movie menu
Image size
Frame rate
White balance
Movie mode
Focus mode
Color mode
320 X 240
15 fps
p. 64
p. 64
p. 55
p. 65
p. 54
p. 60
Auto
Standard movie
Continuous AF
Natural color
94
SETUP MENU
95
Download from Www.Somanuals.com. All Manuals Search And Download.
Focus signal
DATA-TRANSFER MODE
Read this section carefully before connecting the camera to a computer. Instructions on using and
installing the DiMAGE Viewer software are found in the supplied software manual. The DiMAGE
manuals do not cover the basic operation of computers or their operating systems; please refer to
the manual supplied with your computer.
When the shutter-release button is pressed partway down, an audio signal confirms the AF system
has focused. The focus signals can be changed or turned off in section 3 of the setup menu (p. 87).
Two tones are available.
Shutter FX
When the shutter is released, a shutter sound effect gives a positive confirmation a still image is
recorded. The sound effect can be turn off in section 3 of the setup menu (p. 87). Two shutter
effects are available.
System requirements
For the camera to be connected directly to the computer and used as a mass-storage device, the
computer must be equipped with a USB port as a standard interface. Both the computer and the
operating system must be guaranteed by their manufacturers to support USB interface. The follow-
ing operating systems are compatible with the camera:
Windows 98, 98SE, Me, 2000 Professional, and XP home and professional editions.
Mac OS 9.0 ~ 9.2.2 and Mac OS X v.10.1.3 - 10.1.5, v.10.2.1 ~ 10.2.8, v.10.3 ~10.3.6.
Video output
Camera images can be displayed on a television (p. 84). The video output can be changed between
NTSC and PAL in section 4 of the setup menu. North America uses the NTSC standard and Europe
uses the PAL standard. Check which standard is used in your region to play back images on your
television set.
Check the Konica Minolta web site for the latest compatibility information:
North America:
Transfer mode
Users with Windows 98 or 98 Second Edition will need to install the driver software on the included
DiMAGE Viewer CD-ROM (p. 99). No special driver software is required for other Windows or
Macintosh operating systems.
The data-transfer mode must be specified depending on whether images are transferred to a com-
puter or printed directly. The data-storage option must be selected to transfer data from the camera
to a computer or when using the DiMAGE Viewer software. The PictBridge option allows images to
be printed directly from the camera with a PictBridge compatible printer (p. 108).
Customers who have bought a previous DiMAGE digital camera and have installed the Windows 98
driver software must repeat the installation procedure. The updated version of the driver software
included on the supplied DiMAGE Viewer CD-ROM is required for the operation of the DiMAGE Z20
with a computer. The new software will have no affect on the performance of older DiMAGE cam-
eras.
Self-timer
The self-timer delay period can be changed in section 4 of the setup menu (p. 87). Two delay peri-
A remote camera driver is supplied in the Windows edition of the DiMAGE Viewer CD-ROM. The dri-
ver is not compatible with this camera.
ods are available, 10 seconds and 2 seconds.
96
SETUP MENU
97
Download from Www.Somanuals.com. All Manuals Search And Download.
When the USB connection is completed, a drive icon, or volume, appears in
My Computer or the desktop; the name varies with memory card. When
using Windows®XP or Mac OS X, a window may open requesting instruc-
tions on what to do with the image data; follow the directions in the window.
Connecting the camera to a computer
Confirm the battery has sufficient power before connecting the camera to a computer; the full-bat-
tery indicator should be displayed on the monitor. The use of the AC adapter (sold separately) is
recommended over the use of the battery. For users with Windows 98 or 98 Second Edition, read
the section on page 99 on how to install the necessary USB driver before connecting the camera to
a computer.
Mac OS X
Mac OS
1. Start up the computer. The computer must be on before connect-
ing the camera.
Windows XP
2. To transfer images from a memory card, insert the memory card
into the camera. To transfer images from the camera’s internal
memory, remove the memory card from the camera. To insert or
remove the memory card while the camera is connected to a
computer, see page 106.
Windows
Connecting to Windows 98 and 98 SE
The driver needs only to be installed once. If the driver cannot be installed automatically, it can be
installed manually with the operating system’s add-new-hardware wizard; see the instructions on
the following page. During installation, if the operating system requests the Windows®98 CD-ROM,
insert it into the CD-ROM drive and follow the accompanying instructions on the screen. No special
driver software is required for other Windows® or Macintosh operating systems.
3. Open the USB port/Video-out terminal cover. Attach the smaller
3
plug of the USB cable to the camera. The arrow mark on the plug
should face the back of the camera. Make sure the plug is firmly
attached.
4. Attach the other end of the USB cable to the computer’s USB
port. Make sure the plug is firmly attached. The camera should be
connected directly to the computer’s USB port. Attaching the
camera to a USB hub may prevent proper operation.
Automatic Installation
Before connecting the camera to the computer, place the
DiMAGE Viewer CD-ROM in the CD-ROM drive. The
DiMAGE installer menu should automatically activate. To
automatically install the Windows®98 USB driver, click on the
starting-up-the-USB-device-driver-installer button. A window
appears to confirm that the driver should be installed; click
“Yes” to continue.
5. Press the main switch to turn on the camera. The USB connection
4
is made automatically; a screen appears to indicate the operation.
The monitor turns off when the connection has been made. If the
USB connection is not made, disconnect the camera and restart
the computer. Repeat the connection procedure above.
Initializing USB connection.
When the driver has been successfully installed, a window
appears. Click “OK.” Restart the computer and connect the
camera (p. 98) to complete the operation.
98
DATA-TRANSFER MODE
99
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Installation
The add new hardware wizard will confirm the location of
the driver. The letter designating the CD-ROM drive will
vary between computers. Click “Next” to install the driver
in the system.
To install the Windows®98 driver manually, follow the instruc-
tions in the connecting-the-camera-to-a-computer section
on page 98.
When the camera is plugged into the computer, the operat-
ing system will detect the new device and the add-new-
hardware-wizard window opens. Place the DiMAGE Viewer
CD-ROM in the CD-ROM drive. Click “Next.”
One of three drivers may be located: MNLVENUM.inf,
USBPDR.inf, or USBSTRG.inf.
The last window confirms the driver has been installed.
Click “Finish” to close the add new hardware wizard.
Restart the computer.
Choose the recommended search for a suitable driver.
Click “Next.”
When the my-computer window is opened, a new remov-
able-disk icon is displayed. Double click on the icon to
access the camera’s memory card or internal memory; see
page 102.
Choose to specify the location of the driver. The browse
window can be used to indicate the driver location. The
driver should be located in the CD-ROM drive at
:\Win98\USB. When the location is shown in the window,
click “Next.”
100
DATA-TRANSFER MODE
101
Download from Www.Somanuals.com. All Manuals Search And Download.
The number in the image file name may not correspond to the frame number of the image. As
images are deleted in the camera, the frame counter will adjust itself to show the number of images
on the card and reassign the frame numbers accordingly. The serial numbers used with image files
will not change when an image is deleted. When a new image is recorded, it will be assigned a
number one greater than the largest serial number in the folder. File serial numbers can be con-
trolled with the file-number-memory function in section 2 of the setup menu (p. 91).
Folder organization
Once the camera is connected to the computer, image files can be
accessed by double clicking on icons. Image folders are located in
the DCIM folder. The misc. folder contains DPOF print files (p. 82).
Files and folders on the memory card can be deleted using the
computer. Files and folders in the camera’s internal memory cannot
be deleted from the computer. Never format the memory card or
the internal memory from the computer; always use the camera for
formatting. Only files recorded by the camera should be stored on
the memory card or in the internal memory.
Drive Icon
Image files contain Exif tag data. This data includes the time and date the image was recorded as
well as the camera settings used. This data can be viewed with the camera or the DiMAGE Viewer
software.
If a camera image is opened in an image-processing application that does not support Exif tags,
and then the image is saved overwriting the original data, the Exif tag information is erased. Some
Exif compatible applications rewrite the Exif data preventing the DiMAGE Viewer from reading it.
When using software other than the DiMAGE Viewer, always make a backup copy of the image files
to protect the Exif tag data.
Dcim
Misc
From left to right: standard folder,
date folder, copy folder, e-mail
copy folder.
To view images correctly on your computer, the monitor’s color space may need to be adjusted.
Refer to your computer manual on how to calibrate the display to the following requirements: sRGB,
with a color temperature of 6500K, and a gamma of 2.2. Changes made to the captured image with
the camera’s contrast controls will affect any color-matching software in use.
100KM027 10150325 102KM_CP 103KM_EM
Copy images (p. 76) are placed in a folder with a name
ending in “CP.” E-mail Copy images are placed in a fold-
er ending in “EM.” When a new folder is created, the
first three digits in the folder name is one greater than
the largest folder number on the card or in the internal
memory. When the index number in the image file name
exceeds 9,999, a new folder is created with a number
one greater than the greatest folder number on the
memory card or in the internal memory: e.g. from
100KM027 to 101KM027.
Auto power save - data-transfer mode
PICT0001.JPG PICT0002.MOV
Still image Movie clip
When connected to a computer or printer, if the camera does not receive a read or write command
within ten minutes, it will shut down to save power. When the camera shuts down, an unsafe-
removal-of-device warning may appear on the computer monitor. Click “OK.” Neither the camera or
computer will be damaged in this operation. Turn off the camera with the main switch. Remake the
USB connection by turning the camera on.
Image-file names begin with “PICT”
followed by a four-digit file number
and a .jpg or .mov extension. To copy-
ing images, simply drag and drop the
file icon into a location in the comput-
er.
102
DATA-TRANSFER MODE
103
Download from Www.Somanuals.com. All Manuals Search And Download.
Disconnecting the camera
The hardware devices to be stopped will be dis-
played. Highlight the device by clicking on it then
click “Stop.”
Never disconnect the camera when the access lamp is red - the
data or memory card may permanently be damaged.
Windows 98 / 98 Second Edition
Confirm that the access lamp is not lit. Turn off the camera and then disconnect the USB cable.
A confirmation screen will appear to indi-
cate the devices to be stopped. Clicking
“OK” will stop the device.
Windows Me, 2000 Professional, and XP
To disconnect the camera, click once on the unplug-or-eject-hardware icon located
on the task bar. A small window will open indicating the device to be stopped.
A third and final screen will appear to
indicate the camera can be safely dis-
connected from the computer. Close the
window, turn the camera off, and then
disconnect the USB cable.
Click on the small window to stop the
device. The safe-to-remove-hardware
window will open. Close the window,
turn the camera off, and then discon-
nect the USB cable.
Mac OS
When more than one external device are connected to the computer, repeat the procedure above
except right click on the unplug-or-eject-hardware icon. This will open the unplug-or-eject-hardware
window after clicking on the small window indicating the unplug-or-eject-hardware routine.
Confirm that the access lamp is not lit and then drag the
mass-storage device icon and drop it into the trash. Turn
the camera off, and then disconnect the USB cable.
104
DATA-TRANSFER MODE
105
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the memory card
Uninstalling the driver software - Windows
1. Connect the camera to the computer with the USB cable. Other devices must not be connected
Never remove or insert a card when the access lamp is red - the
data or memory card may permanently be damaged.
to the computer during this procedure.
2. Right click on the My-computer icon. Select “properties” from the drop-down menu.
Windows®XP: from the start menu go to the control panel. Click on the performance and mainte-
nance category. Click “System” to open the system properties window.
3. Windows®2000 and XP: select the hardware tab in the properties window and click the device-
manager button.
Windows®98 and 98 Second Edition
1. Turn off the camera.
2. Remove, insert, or replace the memory card.
3. Turn on the camera to remake the USB connection.
Windows®98 and Me: click the device-manager tab in the properties window.
4. The driver file will be located in the universal-serial-bus-controller or other-devices location of the
device manager. Click on the locations to display the files. The driver should be indicated with the
camera name. Under certain conditions, the driver name may not contain the camera name.
However, the driver will be indicated by either a question mark or exclamation point.
5. Click on the driver to select it.
Windows®Me, 2000 Professional, and XP
1. Stop the USB connection using the unplug-or-eject-hardware routine (p. 104).
2. Turn off the camera.
3. Remove, insert, or replace the memory card.
4. Turn on the camera to remake the USB connection.
6. Windows®2000 and XP: click on the action button to display the drop-down menu. Select “unin-
stall.” A confirmation screen will appear. Clicking “Yes” will remove the driver from the system.
Windows®98 and Me: click the remove button. A confirmation screen will appear. Clicking “Yes”
will remove the driver from the system.
Mac OS
1. Stop the USB connection by dragging the drive icon into the trash (p. 105).
2. Turn off the camera.
7. Disconnect the USB cable and turn off the camera. Restart the computer.
3. Remove, insert, or replace the memory card.
4. Turn on the camera to remake the USB connection.
106
DATA-TRANSFER MODE
107
Download from Www.Somanuals.com. All Manuals Search And Download.
PictBridge
No. of prints:
Print size:
Layout:
Print quality:
Data print:
7
Confirm the transfer-mode option in section 4 of the setup menu is
set to PictBridge. To print the images in the camera’s internal memo-
ry, remove the memory card from the camera. Connect the camera
to a PictBridge compatible printer using the camera’s USB cable.
The larger plug on the cable is connected to the printer. Open the
USB port/Video-out terminal cover and insert the smaller plug of the
cable into the camera. Turn the camera on; the PictBridge screen is
displayed automatically.
The number of prints in the print run are displayed as well as the
print parameters selected with the menu. See the menu navigation
section for more information (p. 110). Press the central button of
the controller to begin printing, or press the menu button to return
to the PictBridge screen.
Printer setup
Printer setup
Printer setup
Printer setup
:Start
Printing finished.
Individual still images can be selected for printing on the PictBridge
screen. For other printing options, see the menu navigation section
on page 110.
OK
Once printing begins, the operation can be canceled by pressing the
center of the controller. The printing-finished message indicates the end
of the operation; turn the camera off to end the routine.
The information (i+) button switches between the single frame and
index playback formats on the PictBridge screen. Enlarged playback, activated with the zoom lever,
can be used to examine image files on the screen.
Notes on printing errors
If the battery is exhausted before the print run is complete, printing is canceled. Use a fully-charged
battery or the optional AC adapter.
Total number of prints
Number of copies
If a minor problem occurs during printing, such as the paper runs out, follow the procedure recom-
mended for the printer; no action is required for the camera. If a major printer error occurs, press
the center of the controller to end the routine. Refer to the printer manual for the correct procedure
for the printer problem. Check the printer settings before starting again and deselect the images
that were printed.
Use the left/right keys of the controller to display
the image to be printed.
Press the up key to select the number of copies
to be printed. To deselect an image for printing,
press the down key until the number of copies
reaches zero.
:move
:select
:print
Repeat the previous steps until all the images to be printed are selected. Press the cen-
tral button of the controller to continue.
108
DATA-TRANSFER MODE
109
Download from Www.Somanuals.com. All Manuals Search And Download.
Navigating the PictBridge menu
Pressing the menu button (1) turns the menu on and off. The four-way keys of the controller (2)
Batch print
Index print
–
–
Paper size
Layout
Print quality
Data print
Printer setup
Printer setup
Printer setup
Printer setup
DPOF print
–
move the cursor in the menu. Pressing the central button of the controller enters a setting.
Activate the menu with the menu button.
Use the left/right keys of the controller to highlight the appropriate menu tab; the menu
changes as the tabs are highlighted.
Index to menu functions
Batch print, (p.111)
Index print, (p.111)
Paper size, (p.112)
Layout, (p.112)
DPOF print, (p.113)
Print quality, (p.113)
Data print, (p.113)
Use the up/down keys to scroll through the menu options. Highlight the option whose
setting needs to be changed.
Batch print
With the menu option highlighted, press the right controller key; the settings are dis-
played with the current setting highlighted. If “Start” is displayed, press the center of the
controller to continue.
Batch print in section 1 selects all still images on the memory card or in the camera’s internal mem-
ory for printing. Two options are available:
All-frames - to print all images on the card or the internal memory. A screen opens so the number of
copies of each image can be specified. A maximum number of fifty images can be printed.
Use the up/down keys to highlight the new setting.
Reset - to cancel changes made with the batch print option or with the print selection screen.
Press the central button of the controller to select
the highlighted setting.
2
Index print
Once a setting has been selected, the cursor will return to the
menu options and the new setting will be displayed. To return
to the playback mode, press the menu button. Read the fol-
lowing sections on information on the menu options.
An index print of all still images on the memory card or in the camera’s internal memory can be
made. The quality and size of the print can be specified with the camera menu. The number of
images per page varies with the printer. The print-setup confirmation screen is displayed before the
print routine starts.
1
110
DATA-TRANSFER MODE
111
Download from Www.Somanuals.com. All Manuals Search And Download.
Paper size
Print quality
The paper size of the print can be specified in section 2 of the
PictBridge menu. The printer-setup option uses the size set with
the printer.
The print quality can be set in section 2 of the PictBridge menu. The printer-setup option uses the
quality set with the printer. The fine quality can be specified with the camera.
Paper size
Layout
Print quality
Data print
Printer setup
Highlight the current size setting in the menu and
press the central button of the controller to open the
paper-size screen.
Data print
Data can be printed with the image. The printer-setup option uses the options set with the printer.
The date of capture and the file name can be selected for printing. Data printing can also be dis-
abled with the menu.
:enter
Paper size
Use the four-way key of the controller to highlight the
new paper size.
Printer setup
2” X 3” card
100mmX150mm
4” X 6”
L
Postcard
2L
DPOF print
8” X 10”
Letter
DPOF print in section 3 of the PictBridge menu allows still images and an index print selected with
the DPOF printing options in section 3 of the playback menu to be printed from a DPOF compatible
PictBridge printer. Simply select the start option from the menu to begin the routine.
Press the central button of the controller to set the
paper-size.
A4
:enter
:sel.
Printing Notes
The following are the dimensions for postcard, L, and 2L paper sizes in both
millimeters and inches for your reference:
No. of prints:
Print size:
Layout:
Print quality:
Data print:
7
The number of prints in the print run are displayed; an index print
is counted as one. Press the central button of the controller to
begin printing, or press the menu button to return to the PictBridge
menu.
Printer setup
Printer setup
Printer setup
Printer setup
Postcard
100 X 148mm
89 X 127mm
127 x 178mm
3.9 X 5.9 in.
3.5 X 5.0 in.
5.0 X 7.0 in.
L
2L
:Start
Once printing begins, the operation can be canceled by pressing the
center of the controller. The printing-finished message indicates the end
of the operation; press the center of the controller and turn the camera
off to end the routine.
Layout
Printing finished.
The layout of the print can be set in section 2 of the PictBridge menu. The printer-setup option uses
the layout parameters of the printer. Borderless printing can be specified with the camera as well as
the number of images per page.
OK
112
DATA-TRANSFER MODE
113
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX
Troubleshooting
Make sure the subject is within
the autofocus range (p. 24) or
use the macro mode (p. 35).
Subject is too close.
The section covers minor problems with basic camera operation. For major problems or damage, or
if a problem continues to reoccur frequently, contact a Konica Minolta service facility.
The camera is in macro
mode.
Cancel the macro mode set-
ting (p. 35).
Focus signal
is red.
Pictures are
not sharp.
A special situation is pre- Use the focus-lock function to
Problem
Symptom
Cause
Solution
venting the autofocus
system from focusing (p.
25).
focus on an object at the same
distance as the subject (p. 24)
or use manual focus (p. 54).
The batteries are dead.
Replace batteries (p. 13)
Reinsert the batteries taking
care that the negative and
positive terminals are oriented
as indicated on the inside of
the battery chamber door (p.
13).
Pictures are
taken indoors
or in low-light
situations
Slow shutter speeds
result in blurred images
when the camera is
hand-held.
Use a tripod, change the cam-
era sensitivity to a higher set-
ting (p. 59), or use the flash (p.
26).
AA Ni-MH batteries are
inserted incorrectly.
Nothing dis-
played on the
monitors.
This camera
will not work.
without flash.
While using
flash, the pic-
tures are too
dark.
Move closer to the subject or
change the camera sensitivity
to a higher setting (p. 59).
The subject is beyond the flash range (p.
27, 59).
Check that the adapter is con-
nected to the camera and a
live electrical outlet (p. 15).
The AC adapter is not
connected properly.
The camera temperature rises with extended periods of use. Care should be taken to avoid burns
when handling the camera, batteries, or memory card.
Memory is full and unable
to store an image at the
image-quality or image-
size setting on the cam-
era.
Insert a new memory card (p.
16), delete some images (p.
31), or change the image-qual-
ity or image-size setting (p.
51).
“000” is dis-
played on the
frame counter.
If the camera does not function normally or the system error message appears, turn the camera off,
remove and reinsert the batteries, or unplug and reconnect the AC adapter. If the camera has
become hot with extended use, wait for it to cool before removing or disconnecting the power sup-
ply. Always turn the camera off using the main switch otherwise the memory card may be damaged
and the camera reset.
Shutter will
not release.
This manual contains information on products and accessories available at the time of printing. To
obtain compatibility information on products not contained in this manual, contact a Konica Minolta
service facility.
114
APPENDIX
115
Download from Www.Somanuals.com. All Manuals Search And Download.
Care and storage
Read this section in its entirety to get the best results from your camera. With proper care, your
LCD monitor care
• The LCD monitor is manufactured using high-precision technology and more than 99.99% of the
pixels operate properly. Less than 0.01% of the monitor pixels are displayed as color or bright
points; this is not monitor defect and does not affect the recorded image.
• Do not apply pressure to the surface of the LCD monitor; it may be permanently damaged.
• In cold temperatures, the LCD monitor may become temporarily dark. When the camera warms
up, the display will function normally.
camera will provide years of service.
Camera care
• Do not subject the camera to shock or impact.
• Turn off the camera when transporting.
• If fingerprints are on the LCD monitor, gently wipe with a soft, clean, dry cloth.
• This camera is neither waterproof nor splashproof. Inserting or removing batteries or the memory
card, or operating the camera with wet hands may damage the camera.
• When at the beach or near water, take care not to expose the camera to water or sand. Water,
sand, dust, or salt can damage the camera.
• Do not leave the camera under direct sunlight. Do not point the lens directly at the sun; the CCD
may be damaged.
Batteries
• Battery performance decreases with temperature. In cold environments, we recommend keeping
spare batteries in a warm place, such as the inside of a coat. Batteries can recover their power
when they warm up.
• If batteries have been exhausted when used in the camera, do not reload them even if their
charge seems to recover over time. These batteries will interfere with normal camera operation.
• A special built-in long-life battery supplies power to the clock and memory when the camera is
off. If the camera resets each time it is turned off, the battery is exhausted. The battery must be
replaced at a Konica Minolta service facility.
Storage
• Store in a cool, dry, well-ventilated area away from dust and chemicals. For long periods of
disuse, store the camera in an airtight container with a silica-gel drying agent.
• Remove the batteries and memory card from the camera when not in use for extended periods.
• Do not store the camera in an area with naphthalene or mothballs.
• During long periods of storage, operate the camera occasionally. When taking the camera out of
storage, check that the camera is functioning properly before using.
Operating temperatures and conditions
• This camera has been designed for use in temperatures from 0°C to 40°C (32°F to 104°F).
• Never leave the camera exposed to extreme high temperatures, such as in a car parked in the
sun, or to extreme humidity.
Cleaning
• When taking the camera from a cold to a warm environment, place it in a sealed plastic bag to
prevent condensation from forming. Allow the camera to come to room temperature before
removing it from the bag.
• If the camera or the outside of the lens or flash surface is dirty, gently wipe it with a soft, clean,
dry cloth. If the camera or lens comes in contact with sand, gently blow away loose particles.
Wiping may scratch the surface.
• To clean the lens surface, first blow away any dust or sand, then gently wipe the lens with a cloth
or tissue designed for optics. Use lens-cleaning fluid if necessary.
• Never use organic solvents to clean the camera.
• Never touch the lens or flash surface with your fingers.
116
APPENDIX
117
Download from Www.Somanuals.com. All Manuals Search And Download.
Memory cards
Before important events and journeys
SD Memory Cards and MultiMediaCards are manufactured with precision electronic components.
The following may cause data loss or damage:
• Check the camera’s operation; take test pictures and purchase spare batteries.
• Konica Minolta has no responsibility for any damage or loss incurred by equipment malfunction.
• Improper use of the card.
• Bending, dropping, or subjecting the card to impact.
• Heat, moisture, and direct sunlight.
Copyright
• TV program, films, video tapes, photographs, and other materials may be copyrighted.
Unauthorized recording or duplication of such material may be contrary to copyright laws. Taking
pictures or images of performances, exhibitions, etc., is prohibited without approval and can
infringe on copyright. Images protected by copyright can only be used under the provisions within
the copyright laws.
• Static electrical discharge or electromagnetic fields near the card.
• Removing the card or interrupting the power supply while the camera or a computer is accessing
the card (reading, writing, formatting, etc.).
• Touching the electrical contacts of the card with your fingers or metal objects.
• Using the card beyond its life. Purchasing a new card periodically may be necessary.
Questions and service
The response time is longer with MultiMediaCards compared with SD Memory Cards. This is not a
defect, but rather due to the specifications of the cards. When using large capacity cards, some
operations like deletion may take longer.
• If you have questions about your camera, contact your local camera dealer or write to the Konica
Minolta distributor in your area.
• Before shipping your camera for repair, please contact a Konica Minolta Service Facility.
SD Memory Cards have a write-protect switch to prevent image data
Write-pro-
tect switch
from being deleted. By sliding the switch to the bottom of the card,
the data will be protected. Images cannot be recorded when the card
is protected. If an attempt is made to record or delete an image with
the camera, the card-locked message will appear on the monitor.
Lock posi-
tion
Memory cards should not be used to permanently store image data.
Always make a copy of camera files on an appropriate storage device
or recording media. Konica Minolta has no responsibility for any loss
or damage to data.
118
APPENDIX
119
Download from Www.Somanuals.com. All Manuals Search And Download.
QuickTime system requirements
This mark on your camera certifies that this camera meets the requirements of the
EU (European Union) concerning interference causing equipment regulations. CE
stands for Conformité Européenne (European Conformity).
QuickTime™ is used for playing back movies. To
IBM PC / AT Compatible
install QuickTime, follow the instructions in the
installer. QuickTime is not supplied with the camera
in all sales regions. Users can download the latest
version of QuickTime free of charge from the Apple
Pentium® processor-based PC
or compatible computer
FCC Compliance Statement
Declaration on Conformity
Digital Camera:
DiMAGE Z20
Windows®98, Me, 2000, or XP
Tested To Comply
With FCC Standards
128MB or more of RAM
Responsible Party: Konica Minolta Photo Imaging U.S.A. Inc.
Address: 725 Darlington Avenue, Mahwah, NJ 07430
FOR HOME OR OFFICE USE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two con-
ditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. Changes or modi-
fications not approved by the party responsible for compliance could void the user's authority to
operate the equipment. This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Do not remove the ferrite cores from the cables.
This Class B digital apparatus complies with Canadian ICES-003.
120
APPENDIX
121
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical specifications
CCD:
1/2.5-type interline primary-color CCD
5.0 million
5.2 million
Auto and 50, 100, 200, 320 ISO equivalents.
4:3
11 elements in 9 groups
Batteries:
Four AA alkaline or Ni-MH batteries.
Number of effective pixels:
Total number of pixels:
Camera sensitivity (ISO):
Aspect ratio:
Lens construction:
Maximum aperture:
Focal length:
Battery performance (recording): Approximately 450 frames based on the CIPA stan-
dard with alkaline batteries, LCD monitor on, full-size
images (2560x1920), standard image quality, no
instant playback, no full-time AF, flash used with 50%
of the frames.
Battery performance (playback): Approx. continuous playback time: 700 minutes with
alkaline batteries.
f/3.2 - f/3.4
6 - 48 mm (35mm equivalent: 36 - 290 mm)
0.57 m - inf. / 1.87 ft - inf. (wide-angle position)
1.57 m - inf. / 5.15 ft - inf. (telephoto position)
0.08 - 1.07 m / 0.26 - 3.51 ft in Macro mode
Rapid AF using passive AF and Video AF
Single-shot AF, Continuous AF with Predictive Focus
Control, Full-time AF
Focusing range (from the CCD):
Optional external power source: AC Adapter AC-11
Dimensions:
Weight:
109 (W) X 82 (H) X 94 (D) mm
4.29 (W) X 3.23 (H) X 3.70 (D) in.
Approximately 300g / 10.6 oz.
(without batteries or memory card)
0° - 40°C / 32° - 104°F
Autofocusing system:
Focus modes:
Operating temperature:
Operating humidity:
Shutter:
Shutter speeds:
CCD electronic shutter and mechanical shutter
1/2000 - 4s
5 - 85% (noncondensing)
Built-in flash recycling time:
Monitor LCD:
Monitor field of view:
Viewfinder field of view:
A/D conversion:
5s (approx.)
1.5 inch low-temperature polysilicon TFT color
100% (approx.)
98% (approx.)
10 bit
Specifications are based on the latest information available at the time of printing and are subject to
change without notice.
Recording media:
SD Memory cards, MultiMediaCards and Internal
Storage (approximately 14.5MB)
JPEG, Motion JPEG (mov, without audio).
DCF 2.0 and DPOF compliant.
Exif print, PRINT Image Matching III, PictBridge
Japanese, English, German, French, Spanish, Italian,
Swedish and Chinese (Simplified)
NTSC and PAL
File formats:
Printing output control:
Menu languages:
Video output:
122
APPENDIX
123
Download from Www.Somanuals.com. All Manuals Search And Download.
|