bizhub C30P
User’s Guide
A011-9566-00A
Download from Www.Somanuals.com. All Manuals Search And Download.
SOFTWARE LICENSE AGREEMENT
This package contains the following materials provided by Konica Minolta Business Technolo-
gies, Inc. (KMBT): software included as part of the printing system, the digitally-encoded
machine-readable outline data encoded in the special format and in the encrypted form (“Font
Programs”), other software which runs on a computer system for use in conjunction with the
Printing Software (“Host Software”), and related explanatory written materials (“Documenta-
tion”). The term “Software” shall be used to describe Printing Software, Font Programs and/or
Host Software and also include any upgrades, modified versions, additions, and copies of the
Software.
The Software is being licensed to you under the terms of this Agreement.
KMBT grants to you a non-exclusive sublicense to use the Software and Documentation, pro-
vided that you agree to the following:
1. You may use the Printing Software and accompanying Font Programs for imaging to the
licensed output device(s), solely for your own internal business purposes.
2. In addition to the license for Font Programs set forth in Section 1 (“Printing Software”)
above, you may use Roman Font Programs to reproduce weights, styles, and versions of
letters, numerals, characters and symbols (“Typefaces”) on the display or monitor for your
own internal business purposes.
3. You may make one backup copy of the Host Software, provided your backup copy is not
installed or used on any computer. Notwithstanding the above restrictions, you may install
the Host Software on any number of computers solely for use with one or more printing
systems running the Printing Software.
4. You may assign its rights under this Agreement to an assignee of all of Licensee’s right and
interest to such Software and Documentation (“Assignee”) provided you transfer to
Assignee all copies of such Software and Documentation Assignee agrees to be bound by
all of the terms and conditions of this Agreement.
5. You agree not to modify, adapt or translate the Software and Documentation.
6. You agree that you will not attempt to alter, disassemble, decrypt, reverse engineer or
decompile the Software.
7. Title to and ownership of the Software and Documentation and any reproductions thereof
shall remain with KMBT and its Licensor.
8. Trademarks shall be used in accordance with accepted trademark practice, including iden-
tification of the trademark owner’s name. Trademarks can only be used to identify printed
output produced by the Software. Such use of any trademark does not give you any rights
of ownership in that trademark.
9. You may not rent, lease, sublicense, lend or transfer versions or copies of the Software that
the Licensee does not use, or Software contained on any unused media, except as part of
the permanent transfer of all Software and Documentation as described above.
10. In no event will KMBT or its licensor be liable to you for any consequential, incidental INDI-
RECT, PUNITIVE or special damages, including any lost profits or lost saving, even if
KMBT has been advised of the possibility of such damages, or for any claim by any third
party. KMBT or its licensor disclaims all warranties with regard to the software, express or
implied, including, without limitation implied warranties of merchantability, fitness for a par-
ticular purpose, title and non-infringement of third party rights. Some states or jurisdictions
do not allow the exclusion or limitation of incidental, consequential or special damages, so
the above limitations may not apply to you.
Download from Www.Somanuals.com. All Manuals Search And Download.
11. Notice to Government End Users: The Software is a “commercial item,” as that term is
defined at 48 C.F.R.2.101, consisting of “commercial computer software” and “commercial
computer software documentation,” as such terms are used in 48 C.F.R. 12.212. Consis-
tent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4, all U.S. Govern-
ment End Users acquire the Software with only those rights set forth herein.
12. You agree that you will not export the Software in any form in violation of any applicable
laws and regulations regarding export control of any countries.
About Adobe Color Profile
ADOBE SYSTEMS INCORPORATED
COLOR PROFILE LICENSE AGREEMENT
NOTICE TO USER: PLEASE READ THIS CONTRACT CAREFULLY. BY USING ALL OR ANY
PORTION OF THE SOFTWARE YOU ACCEPT ALL THE TERMS AND CONDITIONS OF
THIS SOFTWARE YOU ACCEPT ALL THE TERMS AND CONDITIONS OF THIS AGREE-
MENT. IF YOU DO NOT AGREE WITH THE TERMS OF THIS AGREEMENT, DO NOT USE
THE SOFTWARE.
1. DEFINITIONS In this Agreement, “Adobe” means Adobe Systems Incorporated, a Dela-
ware corporation, located at 345 Park Avenue, San Jose, California 95110. “Software”
means the software and related items with which this Agreement is provided.
2. LICENSE Subject to the terms of this Agreement, Adobe hereby grants you the worldwide,
non-exclusive, nontransferable, royalty-free license to use, reproduce and publicly display
the Software. Adobe also grants you the rights to distribute the Software only (a) as embed-
ded within digital image files and (b) on a standalone basis. No other distribution of the
Software is allowed; including, without limitation, distribution of the Software when incorpo-
rated into or bundled with any application software. All individual profiles must be refer-
enced by their ICC Profile description string. You may not modify the Software. Adobe is
under no obligation to provide any support under this Agreement, including upgrades or
future versions of the Software or other items. No title to the intellectual property in the Soft-
ware is transferred to you under the terms of this Agreement. You do not acquire any rights
to the Software except as expressly set forth in this Agreement.
3. DISTRIBUTION If you choose to distribute the Software, you do so with the understanding
that you agree to defend, indemnify and hold harmless Adobe against any losses, dam-
ages or costs arising from any claims, lawsuits or other legal actions arising out of such dis-
tribution, including without limitation, your failure to comply with this Section 3. If you
distribute the Software on a standalone basis, you will do so under the terms of this Agree-
ment or your own license agreement which (a) complies with the terms and conditions of
this Agreement; (b) effectively disclaims all warranties and conditions, express or implied,
on behalf of Adobe; (c) effectively excludes all liability for damages on behalf of Adobe; (d)
states that any provisions that differ from this Agreement are offered by you alone and not
Adobe and (e) states that the Software is available from you or Adobe and informs licens-
ees how to obtain it in a reasonable manner on or through a medium customarily used for
software exchange. Any distributed Software will include the Adobe copyright notices as
included in the Software provided to you by Adobe.
Download from Www.Somanuals.com. All Manuals Search And Download.
4. DISCLAIMER OF WARRANTY Adobe licenses the Software to you on an “AS IS” basis.
Adobe makes no representation as to the adequacy of the Software for any particular pur-
pose or to produce any particular result. Adobe shall not be liable for loss or damage aris-
ing out of this Agreement or from the distribution or use of the Software or any other
materials. ADOBE AND ITS SUPPLIERS DO NOT AND CANNOT WARRANT THE PER-
FORMANCE OR RESULTS YOU MAY OBTAIN BY USING THE SOFTWARE, EXCEPT
FOR ANY WARRANTY, CONDITION, REPRESENTATION OR TERM TO THE EXTENT
TO WHICH THE SAME CANNOT OR MAY NOT BE EXCLUDED OR LIMITED BY LAW
APPLICABLE TO YOU IN YOUR JURISDICTION, ADOBE AND ITS SUPPLIERS MAKE
NO WARRANTIES, CONDITIONS, REPRESENTATIONS OR TERMS, EXPRESS OR
IMPLIED, WHETHER BY STATUTE, COMMON LAW, CUSTOM, USAGE OR OTHER-
WISE AS TO ANY OTHER MATTERS, INCLUDING BUT NOT LIMITED TO NON-
INFRINGEMENT OF THIRD PARTY RIGHTS, INTEGRATION, SATISFACTORY QUALITY
OR FITNESS FOR ANY PARTICULAR PURPOSE. YOU MAY HAVE ADDITIONAL
RIGHTS WHICH VARY FROM JURISDICTION TO JURISDICTION. The provisions of Sec-
tions 4, 5 and 6 shall survive the termination of this Agreement, howsoever caused, but this
shall not imply or create any continued right to use the Software after termination of this
Agreement.
5. LIMITATION OF LIABILITY IN NO EVENT WILL ADOBE OR ITS SUPPLIERS BE LIABLE
TO YOU FOR ANY DAMAGES, CLAIMS OR COSTS WHATSOEVER OR ANY CONSE-
QUENTIAL, INDIRECT, INCIDENTAL DAMAGES, OR ANY LOST PROFITS OR LOST
SAVINGS, EVEN IF AN ADOBE REPRESENTATIVE HAS BEEN ADVISED OF THE POS-
SIBILITY OF SUCH LOSS, DAMAGES, CLAIMS OR COSTS OR FOR ANY CLAIM BY
ANY THIRD PARTY. THE FOREGOING LIMITATIONS AND EXCLUSIONS APPLY TO
THE EXTENT PERMITTED BY APPLICABLE LAW IN YOUR JURISDICTION. ADOBE’S
AGGREGATE LIABILITY AND THAT OF ITS SUPPLIERS UNDER OR IN CONNECTION
WITH THIS AGREEMENT SHALL BE LIMITED TO THE AMOUNT PAID FOR THE SOFT-
WARE. Nothing contained in this Agreement limits Adobe’s liability to you in the event of
death or personal injury resulting from Adobe’s negligence or for the tort of deceit (fraud).
Adobe is acting on behalf of its suppliers for the purpose of disclaiming, excluding and/or
limiting obligations, warranties and liability as provided in this Agreement, but in no other
respects and for no other purpose.
6. TRADEMARKS Adobe and the Adobe logo are the registered trademarks or trademarks of
Adobe in the United States and other countries. With the exception of referential use, you
will not use such trademarks or any other Adobe trademark or logo without separate prior
written permission granted by Adobe.
7. TERM This Agreement is effective until terminated. Adobe has the right to terminate this
Agreement immediately if you fail to comply with any term hereof. Upon any such termina-
tion, you must return to Adobe all full and partial copies of the Software in your possession
or control.
8. GOVERNMENT REGULATIONS If any part of the Software is identified as an export con-
trolled item under the United States Export Administration Act or any other export law,
restriction or regulation (the “Export Laws”), you represent and warrant that you are not a
citizen, or otherwise located within, an embargoed nation (including without limitation Iran,
Iraq, Syria, Sudan, Libya, Cuba, North Korea, and Serbia) and that you are not otherwise
prohibited under the Export Laws from receiving the Software. All rights to use the Software
are granted on condition that such rights are forfeited if you fail to comply with the terms of
this Agreement.
Download from Www.Somanuals.com. All Manuals Search And Download.
9. GOVERNING LAW This Agreement will be governed by and construed in accordance with
the substantive laws in force in the State of California as such laws are applied to agree-
ments entered into and to be performed entirely within California between California resi-
dents. This Agreement will not be governed by the conflict of law rules of any jurisdiction or
the United Nations Convention on Contracts for the International Sale of Goods, the appli-
cation of which is expressly excluded. All disputes arising out of, under or related to this
Agreement will be brought exclusively in the state Santa Clara County, California, USA.
10. GENERAL You may not assign your rights or obligations granted under this Agreement
without the prior written consent of Adobe. None of the provisions of this Agreement shall
be deemed to have been waived by any act or acquiescence on the part of Adobe, its
agents, or employees, but only by an instrument in writing signed by an authorized signa-
tory of Adobe. When conflicting language exists between this Agreement and any other
agreement included in the Software, the terms of such included agreement shall apply. If
either you or Adobe employs attorneys to enforce any rights arising out of or relating to this
Agreement, the prevailing party shall be entitled to recover reasonable attorneys’ fees. You
acknowledge that you have read this Agreement, understand it, and that it is the complete
and exclusive statement of your agreement with Adobe which supersedes any prior agree-
ment, oral or written, between Adobe and you with respect to the licensing to you of the
Software. No variation of the terms of this Agreement will be enforceable against Adobe
unless Adobe gives its express consent, in writing, signed by an authorized signatory of
Adobe.
ICC Profile for TOYO INK Standard Color on Coated paper
(TOYO Offset Coated 2.1)
This ICC Profile (TOYO Offset Coated 2.1) characterizes Japanese offset press on Coated
paper and is fully compatible with ICC profile format.
About “TOYO INK Standard Color on Coated paper”
This is the standard for color reproduction of sheet-fed offset press on Coated paper made by
TOYO INK MFG.CO., LTD. (“TOYO INK”).
This standard is made from printing test with using TOYO INK’s sheet-fed offset printing inks
and TOYO INK’s own printing conditions.
“TOYO INK Standard Color on Coated paper” is compatible with “JAPAN COLOR”.
Agreement
1. The reproduction of images on a printer or a monitor using this ICC Profile do not com-
pletely match the TOYO INK Standard Color on Coated paper.
2. Any and all copyrights of this ICC Profile shall remain in TOYO INK; therefore you shall not
transfer, provide, rent, distribute, disclose, or grant any rights in this ICC Profile to any third
party without the prior written consent of TOYO INK.
3. In no event will TOYO INK its directors, officers, employees or agents be liable to you for
any consequential or incidential, either direct or indirect, damages (including damages for
loss of business profits, business interruption, loss of business information, and the like)
arising out of the use or inability to use this ICC Profile.
4. TOYO INK shall not be responsible for answering any question related to this ICC Profile.
Download from Www.Somanuals.com. All Manuals Search And Download.
5. All company names and product names used in this document is the trademarks or regis-
tered trademarks of their respective holder.
This ICC Profile made by GretagMacbeth ProfileMaker and granted TOYO INK certain license
to distribute by GretagMacbeth AG.
TOYO Offset Coated 2.1 © TOYO INK MFG. CO., LTD. 2004
For EU member states only
This symbol means: Do not dispose of this product
together with your household waste!
Please contact the Local Authority for appropriate dis-
posal instructions. In the case of a new device being
purchased, the used one can also be given to our dealer
for appropriate disposal. Recycling of this product will
help to conserve natural resources and prevent potential
negative consequences for the environment and human
health caused by inappropriate waste handling.
This product complies with RoHS (2002/95/EC) direc-
tive.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Trademarks
Notice
About Adobe Color Profile
ICC Profile for TOYO INK Standard Color on Coated paper
2
1
2
Introduction ....................................................................................................... 1
Getting Acquainted with Your Printer 2
Space Requirements
Printer Parts
2
4
Front View 4
Rear View 5
Front View with Options 5
About the Software ........................................................................................... 7
Printer Driver CD-ROM 8
PostScript Drivers
8
i
Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
PCL Drivers
PPD Files
9
Utilities
9
System Requirements 12
Selecting Driver Options/Defaults
(for Windows) 13
Windows XP/Server 2003/2000/NT 4.0 13
Uninstalling the Printer Driver
(for Windows) 15
Windows XP/Server 2003/2000/NT 4.0 15
Displaying Printer Driver Settings
(for Windows) 16
Common Buttons 17
OK 17
Cancel 17
Apply 17
Help 17
Easy Set 17
Paper View 18
Quality View 18
Default 18
Basic Tab 19
Cover Page Tab 20
Version Tab 21
Limitations on printer driver functions installed with Point and Print 21
3
Using the Status Monitor (Windows Only) ....................................................23
Working with the Status Monitor 24
Introduction 24
Operating Environment 24
Opening the Status Monitor 24
Using the Status Monitor 24
Recognizing Status Monitor Alerts 25
Recovering from a Status Monitor Alert 25
Closing the Status Monitor 25
ii
Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Message Window 30
Printing/Deleting a Stored Job 34
Entering the Password 36
QUALITY MENU 46
CAMERA DIRECT 68
SYS DEFAULT MENU 75
5
6
7
Camera Direct .................................................................................................. 93
Memory Direct ................................................................................................. 95
Using Media ..................................................................................................... 97
Media Types 99
Envelopes 101
Labels 102
Letterhead 103
Postcards 104
Transparencies 105
Glossy Media 106
What Is the Guaranteed Imageable (Printable) Area? 107
Imageable Area—Envelopes 107
Page Margins 107
Loading Media 108
Tray 1 (Manual Feed Tray) 108
Loading Plain Paper 108
Other Media 110
iii
Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading Envelopes 111
encies 115
Loading Banner Paper 118
Tray 2 121
Loading Plain Paper 121
Loading Plain Paper 123
Duplexing 126
Output Tray 127
Finishing 128
8
Replacing Consumables ...............................................................................131
Replacing Consumables 132
Replacing the Transfer Roller 148
Replacing the Ozone Filter 151
Replacing the Staple 161
9
Maintaining the Printer ..................................................................................165
Maintaining the Printer 166
Exterior 168
Cleaning the Media Feed Rollers (Tray 2/3/4) 171
Cleaning the Duplex Option Feed Rollers 172
Cleaning the Media Transfer Rollers for Tray 3 and 4 173
Cleaning the Laser Lens 174
10 Troubleshooting ............................................................................................175
Introduction 176
Printing a Configuration Page 176
Preventing Media Misfeeds 177
Understanding the Media Path 178
Clearing Media Misfeeds 179
iv
Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
Roller 191
Staple Finisher (Case 1) 194
Staple Finisher (Case 2) 195
Staple Finisher (Case 3) 196
Clearing Jammed Staples 197
11 Installing Accessories .................................................................................. 225
Introduction 226
Antistatic Protection 226
Installing the Hard Disk drive 230
CompactFlash 233
Lower Feeder Unit 239
Staple Finisher 244
Accessories 244
Unpacking and installing the Staple Finisher 245
A Appendix ........................................................................................................255
Safety Specifications 256
Technical Specifications 256
Printer 256
Consumable Life Expectancy Chart 259
Our Concern for Environmental Protection 260
What is an ENERGY STAR product? 260
v
Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
vi
Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Acquainted with Your Printer
Space Requirements
To ensure easy operation, consumable replacement and maintenance,
adhere to the recommended space requirements detailed below.
100 mm
(3.9")
100 mm
(3.9")
704 mm (27.7")
284 mm
420 mm (16.5")
(11.2")
Front View
100 mm
(3.9")
100 mm
(3.9")
1175 mm (46.3")
480 mm (18.9")
420 mm (16.5")
100 mm
(3.9")
475 mm (18.7")
60 mm
(2.4")
Front View with Options
2
Getting Acquainted with Your Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
846 mm (33.3")
526 mm (20.7")
100 mm
(3.9")
Side View with Options
ꢀ"
The options appear shaded in the above illustrations.
3
Getting Acquainted with Your Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Printer Parts
The following drawings illustrate the parts of your printer referred to through-
out this guide, so please take some time to become familiar with them.
Front View
1
2
3
1—Control panel
2—Output tray
14
13
12
3—Fuser unit
4—Right side cover
5—Tray 1 (Manual feed tray)
6—Transfer roller
7—Transfer belt unit
8—Tray 2
4
5
11
6
10
9
8
7
9—Print unit
10—Grip
6
11—Laser lens cleaning tool
12—Front cover
13—Waste toner bottle
14—Toner cartridge
7
9
P
U
S
H
Y
11
13
14
Y
4
Getting Acquainted with Your Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear View
1
2
1—KONICA MINOLTA Digital Cam-
era Direct Print Port
2—Power switch
3—Ozone filter
8
7
4—Power connection
5—Parallel port
6—10Base-T/100Base-TX/
1000Base-T Ethernet Interface
port
3
6
5
4
7—USB port
8—Ventilation grilles
Front View with Options
3
1—Duplex option
2—Lower feeder units (Tray 3 and
Tray 4)
1
3—Staple Finisher
2
5
Getting Acquainted with Your Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Printer Driver CD-ROM
PostScript Drivers
Operating System
Use/Benefit
Windows XP/Server 2003/2000
These drivers give you access to all of
the printer features, including finish-
ing and advanced layout. See also
“Displaying Printer Driver Settings (for
Windows)” on page 16.
Windows XP for 64bit
Windows Server 2003 for 64bit
ꢀ"
A specific PPD file has been prepared for applications (such as Page-
Maker and Corel Draw) that require that a PPD file be specified when
printing.
2003, 2000 and NT 4.0, use the specific PPD file provided on the
Printer Driver CD-ROM.
PCL Drivers
Operating System
Use/Benefit
Windows XP/Server 2003/2000
These drivers give you access to all of
the printer features, including finish-
ing and advanced layout. See also
“Displaying Printer Driver Settings (for
Windows)” on page 16.
Windows XP for 64bit
Windows Server 2003 for 64bit
Windows NT 4.0
8
Printer Driver CD-ROM
Download from Www.Somanuals.com. All Manuals Search And Download.
PPD Files
Operating System
Use/Benefit
Windows XP/Server 2003/2000/NT These PPD files allow you to install
4.0
the printer for a variety of platforms,
drivers, and applications.
Macintosh OS 9/X
Linux
These files are required in order to
use the printer driver for each operat-
ing system.
For details of the Macintosh and Linux
printer drivers, refer to the bizhub
C30P Reference Guide on the Utilities
and Documentation CD-ROM.
ꢀ"
For details on the installation of the Windows printer drivers, refer to
the bizhub C30P Installation Guide on the Utilities and Documentation
CD-ROM.
Utilities and Documentation CD-ROM
Utilities
Utility
Use/Benefit
Download Manager
This utility, which can be used only if
(Windows XP/Server 2003/2000/NT the optional hard disk drive is
4.0, Macintosh OS 10.2.x or later)
installed, enables fonts and overlay
data to be downloaded to the printer
hard disk drive.
For details, refer to the Download
Manager online help for all of the func-
tions.
Crown Print Monitor+ for Windows
Using the TCP/IP protocol, print jobs
can be sent directly to the printer. For
details, refer to the bizhub C30P Ref-
erence Guide on the Utilities and Doc-
umentation CD-ROM.
9
Utilities and Documentation CD-ROM
Download from Www.Somanuals.com. All Manuals Search And Download.
Utility
Use/Benefit
Status Monitor (Windows only)
The current status of the printer in
addition to the status of consumables
and error information can be viewed.
For details, refer to See “Using the
Status Monitor (Windows Only)” on
page 23.
PageScope Net Care
Printer management functions such as
status monitoring and network settings
can be accessed.
For details, refer to the PageScope
Net Care Quick Guide on the Utilities
and Documentation CD-ROM.
PageScope Web Connection
PageScope Network Setup
PageScope Plug and Print
With a Web browser, the status of
printers can be checked, and the vari-
ous settings can be changed.
For details, refer to the bizhub C30P
Reference Guide on the Utilities and
Documentation CD-ROM.
Using the TCP/IP and IPX protocols,
basic network printer settings can be
specified.
For details, refer to the PageScope
Network Setup User Manual on the
Utilities and Documentation CD-ROM.
This utility automatically detects a new
printer connected to the network and
creates a print object on the Windows
print server.
For details, refer to the PageScope
Plug and Print Quick Guide on the
Utilities and Documentation CD-ROM.
PageScope NDPS Gateway
This network utility enables printers
and KONICA MINOLTA multifunctional
products to be used in an NDPS envi-
ronment.
For details, refer to the PageScope
NDPS Gateway User Manual on the
Utilities and Documentation CD-ROM.
10
Utilities and Documentation CD-ROM
Download from Www.Somanuals.com. All Manuals Search And Download.
Utility
Use/Benefit
PageScope Direct Print
This application provides functions for
sending PDF and TIFF files directly to
a printer to be printed.
For details, refer to the PageScope
Direct Print Users Guide on the Utili-
ties and Documentation CD-ROM.
11
Utilities and Documentation CD-ROM
Download from Www.Somanuals.com. All Manuals Search And Download.
System Requirements
„ Personal computer
– Pentium 2: 400 MHz (Pentium 3: 500 MHz or higher is recommended)
– Power Mac G3 or later (G4 or later is recommended)
– Intel Core Duo (iMac or MacBook Pro) or leter
„ Operating System
– Microsoft Windows XP Home Edition/Professional (Service Pack 1 or
later; Service Pack 2 or later is recommended),
Windows XP Professional x64 Edition, Windows Server 2003,
Windows Server 2003 x64 Edition, Windows 2000 (Service Pack 4 or
later), Windows NT 4.0 (Service Pack 6)
– Mac OS 9 (9.1 or later), Mac OS X (10.2 or later) Classic mode
– Mac OS X (10.2 or later; We recommend installing the newest patch),
Mac OS X Server (10.2 or later)
– Red Hat Linux 9.0, SuSE Linux 8.2
„ Free hard disk space
– Approximately 20 MB of free hard disk space for printer driver and
Status Monitor
– Approximately 128 MB of free hard disk space for image processing
„ RAM
128 MB or more
„ CD-ROM/DVD drive
„ I/O interface
– 10Base-T/100Base-TX/1000Base-T Ethernet interface port
– USB Revision 2.0 compliant port
– Parallel (IEEE 1284) port
ꢀ"
For details of the Macintosh and Linux printer drivers, refer to the
bizhub C30P Reference Guide on the Utilities and Documentation
CD-ROM.
12
System Requirements
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting Driver Options/Defaults
(for Windows)
Before you start working with your printer, you are advised to verify/change
the default driver settings. Also, in case you have options installed, you
should “declare” the options in the driver.
Windows XP/Server 2003/2000/NT 4.0
1
Choose the driver’s properties as follows:
– (Windows XP/Server 2003)
From the Start menu, choose Printers and Faxes to display the
Printers and Faxes directory. Right-click the KONICA MINOLTA
bizhub C30P PCL6 or KONICA MINOLTA bizhub C30P PS printer
icon and choose Properties.
– (Windows 2000/NT 4.0)
From the Start menu, choose Settings and then Printers to display
the Printers directory. Right-click the KONICA MINOLTA bizhub C30P
PCL6 or KONICA MINOLTA bizhub C30P PS printer icon and choose
Properties.
– PostScript printer driver for Windows NT 4.0 is not supported.
2
If you have installed options, proceed with the next step. Otherwise, skip
to step 9.
3
4
Select the Configure tab.
Check that the installed options are correctly listed. If not, proceed with
the next step. Otherwise, continue with step 8.
5
Click the Refresh to automatically configure installed options.
ꢀ"
The Refresh is available only if bi-directional communication is
available with the printer; otherwise it is grayed out.
6
From the Device Options list, select an option, one at a time, and then
select Enable or Disable from the Settings menu.
ꢀ"
ꢀ"
If Printer Memory is selected, select 256 MB, 512 MB, 768 MB or
1024 MB, according to the installed memory. The factory default
setting is 256 MB.
If Memory Card is selected, select Disable, Enable (1 GB
Under), or Enable (1 GB Over), according to the installed Com-
pactFlash card.
13
Selecting Driver Options/Defaults (for Windows)
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Click Apply.
ꢀ"
ꢀ"
Depending on the version of the operating system, Apply may not
appear. If this is the case, continue with the next step.
With Windows NT 4.0, right-click the KONICA MINOLTA bizhub
C30P PCL6 printer icon in the Printers directory, and then click
Document Defaults. Skip to step 10.
8
9
Select the General tab.
Click Printing Preferences.
Printing Preference dialog box appears.
10
Select the default settings for your printer, such as the default media for-
mat you use, on the appropriate tabs.
11
12
13
Click Apply.
Click OK to exit from the Print preference dialog box.
Click OK to exit from the Properties dialog box.
14
Selecting Driver Options/Defaults (for Windows)
Download from Www.Somanuals.com. All Manuals Search And Download.
Uninstalling the Printer Driver
(for Windows)
This section describes how to uninstall the KONICA MINOLTA bizhub C30P
printer driver if necessary.
Windows XP/Server 2003/2000/NT 4.0
1
2
Close all applications.
Choose the Uninstall Program as follows:
– (Windows XP/Server 2003)
From the Start menu, choose All programs, KONICA MINOLTA,
bizhub C30P, and then Uninstall Printer Driver.
– (Windows 2000/NT4.0)
From the Start menu, choose Programs, KONICA MINOLTA, bizhub
C30P, and then Uninstall Printer Driver.
3
When the Uninstall dialog box appears, select the name of the driver to be
deleted, and then click the Uninstall button.
4
5
6
Click Uninstall.
Click OK, and restart your computer.
The KONICA MINOLTA bizhub C30P printer driver will be uninstalled from
your computer.
15
Uninstalling the Printer Driver (for Windows)
Download from Www.Somanuals.com. All Manuals Search And Download.
Displaying Printer Driver Settings
(for Windows)
Windows XP/Server 2003
1
2
From the Start menu, choose Printers and Faxes to display the Printers
and Faxes directory.
Right-click the KONICA MINOLTA bizhub C30P PCL6 or KONICA
MINOLTA bizhub C30P PS printer icon and choose Printing Prefer-
ences.
Windows 2000/NT 4.0
1
2
From the Start menu, point to Settings, and then click Printers to display
the Printers directory.
Display the printer driver settings:
„ Windows 2000—Right-click the KONICA MINOLTA bizhub C30P
PCL6 or KONICA MINOLTA bizhub C30P PS printer icon and choose
Printer Properties.
„ Windows NT 4.0—Right-click the KONICA MINOLTA PCL6 printer
icon and choose Document Defaults.
16
Displaying Printer Driver Settings (for Windows)
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Postscript and PCL Printer Driver
Common Buttons
The buttons described below appear on each tab.
OK
Click to exit the Properties dialog box, saving any changes made.
Cancel
Click to exit the Properties dialog box without saving any changes made.
Apply
Click to save all changes without exiting the Properties dialog box.
ꢀ"
Depending on the version of the operating system, Apply may not
appear.
Help
Click to view the help.
Easy Set
This allows the current settings to be saved. To save the current settings,
specify the desired settings, and then click Save. Specify the settings
described below, and the click OK.
„ Name: Type in the name of the settings to be saved.
„ Comment: Add a simple comment to the settings to be saved.
„ Sharing: Specify whether or not the settings to be saved can be used by
other users logged onto the computer.
Afterward, the saved settings can be selected from the drop-down list. To
change the registered setting, click Edit.
Select Defaults from the drop-down list to reset the functions in all tabs to
their default values.
17
Using the Postscript and PCL Printer Driver
Download from Www.Somanuals.com. All Manuals Search And Download.
Paper View
Click the button to display a sample of the page layout in the figure area.
ꢀ"
This button does not appear on the Advanced, Watermark, Quality,
and Version tabs.
Printer View
Click the button to display an image of the printer (with all installed options) in
the figure area.
ꢀ"
This button does not appear on the Advanced and Version tabs.
Watermark View
Click this button to display a preview of the watermark.
ꢀ"
This button appears only when the Watermark tab is selected.
Quality View
Click this button to display a sample of the settings selected in the Quality
tab.
ꢀ"
This button appears only when the Quality tab is selected.
Default
Click this button to reset the settings to their defaults.
ꢀ"
This button does not appear on the Advanced and Version tabs.
Advanced Tab (PostScript Printer Driver Only)
The Advanced Tab allows you to
„ Specify the PostScript output method
„ Specify whether or not the error messages of a print job are printed
„ Print a mirror image
„ Specify whether or not the application can directly output PostScript data
18
Using the Postscript and PCL Printer Driver
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Tab
The Basic Tab allows you to
„ Specify the orientation of the media
„ Specify the size of the original document
„ Select the output media size
„ Zoom (expand/reduce) documents
„ Specify the paper source
„ Specify the type of media
„ Specify the number of copies
„ Turn on/off job collation
„ Turn on/off offset
„ Save a print job on the printer and print it later (Job Retention)
„ Save a confidential job on the printer and protect it with a password
„ Print a single copy for proofing
„ Send a notification by e-mail when printing is finished
„ Specify user information such as e-mail addresses and passwords
„ Specify user authentication and account track settings
„ Print on the back side of paper that has already been printed on
ꢀ"
ꢀ"
Use paper that has been printed on with bizhub C30P.
In addition, the page printed with this setting is not guaranteed.
Do not use the following types of paper.
- Paper that has been printed on with an inkjet printer
- Paper that has been printed on with a monochrome/color lase
printer/copier
- Paper that has been printed on with any other printer or fax machine
Layout Tab
The Layout Tab allows you to
„ Print several pages of a document on the same page (N-up printing)
„ Specify booklet printing
„ Rotate the print image 180 degrees
„ Specify duplex (Double-Sided) printing
„ Select the output tray for the staple finisher
„ Select whether or not to staple with the staple finisher
19
Using the Postscript and PCL Printer Driver
Download from Www.Somanuals.com. All Manuals Search And Download.
„ Specify whether or not blank pages are printed (PCL printer driver only)
„ Adjust the binding margin (PCL printer driver only)
„ Adjust the printing position (PCL printer driver only)
Cover Page Tab
The Cover Page Tab allows you to
„ Print front and back cover pages and separator pages
„ Specify the Lower Feeder Unit that contains the paper for the front and
back cover pages and separator pages
Overlay Tab
ꢀ"
Be sure to use overlays with print jobs with a paper size and orienta-
tion that matches the overlay form.
In addition, if settings have been specified for “N-up” or “Booklet” in
the printer driver, the overlay form cannot be adjusted to match the
specified settings.
The Overlay Tab allows you to
„ Select the form to use
„ Add or delete overlay files
„ Launch Download Manager to download a form (PostScript printer driver
only)
ꢀ"
Download Manager Application should be installed earlier.
„ Create a form (PCL printer driver only)
„ Specify that the document and form are printed overlapping (PCL printer
driver only)
„ Display the form information (PCL printer driver only)
„ Print the form on All Pages, First Page, Even Pages and Odd Pages
„ Place the form in back of the document or in front on the printed docu-
ment (PCL printer driver only)
Watermark Tab
The Watermark Tab allows you to
„ Select the watermark to be used
„ Create, edit or delete watermarks
„ Lighten the density of the watermark
20
Using the Postscript and PCL Printer Driver
Download from Www.Somanuals.com. All Manuals Search And Download.
„ Print the watermark on only the first page
„ Print the watermark repeatedly throughout the all pages (PostScript
printer driver only)
Quality Tab
The Quality Tab allows you to
„ Switch between color and grayscale printing
„ Control the darkness of an image (Brightness)
„ Specify the printer color settings (Quick Color)
„ Specify the resolution for the printout
„ Perform color separation
„ Select whether or not economy printing is used
„ Set the edge strength to Low, Middle or High
„ Turn on/off glossy mode
„ Specify the format of fonts that are to be downloaded
„ Print using the printer’s fonts
„ Control the tones of an image (Contrast) (PCL printer driver only)
„ Specify the image compression method (PCL printer driver only)
Version Tab
The Version Tab allows you to view information about the printer driver.
Limitations on printer driver functions installed with
Point and Print
If Point and Print is performed with the following server and client combina-
tions, there are limitations on some printer driver functions.
„ Server and client combinations
Server: Windows Server 2003/XP/2000
Client: Windows NT 4.0
„ Functions with limitations applied
Booklet, Skip Blank Pages, Front Cover Page, Back Cover Page, Separa-
tor Page, Create Overlay, Print Overlay, Watermark
*JOBNAME, USERNAME, and HOSTNAME output of PJL
When using these operating system combinations, install the printer driver on
the client with a local connection, and then specify the shared printer installed
on the server as the connection.
21
Using the Postscript and PCL Printer Driver
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Using the Postscript and PCL Printer Driver
Download from Www.Somanuals.com. All Manuals Search And Download.
Working with the Status Monitor
Introduction
The Status Monitor shows information about the current status of the printer.
The Status Monitor can be installed from the Utilities and Documentation
CD-ROM.
For details on the installation, refer to the bizhub C30P Reference Guide on
the Utilities and Documentation CD-ROM.
Operating Environment
The Status Monitor can be used on computers running Windows XP/
Server 2003/2000/NT 4.0 connected to the printer using an Ethernet connec-
tion.
Opening the Status Monitor
Use one of the following steps to open the Status Monitor:
„ Windows XP/Server 2003—From the Start menu, choose All Pro-
grams, KONICA MINOLTA, and then Status Monitor. Double-click the
Status Monitor icon displayed in the taskbar.
„ Windows 2000/NT 4.0—From the Start menu, choose Programs, KON-
ICA MINOLTA, and then Status Monitor. Double-click the Status Monitor
icon displayed in the taskbar.
Using the Status Monitor
Status Tab
„ Select Printer—Selects the printer whose status is displayed. In addition,
the messages that appear in the message window of the selected printer
are displayed.
„ Graphic—Shows a graphic representation of the printer and indicates
where the problem is. When the background of the printer graphic is red
or yellow, there is an error and the job has been interrupted.
„ Advanced Options—Click Advanced Options to display the Advanced
Options dialog box. From the Advanced Options dialog box, select
whether the Status Monitor automatically starts when the operating sys-
tem is started.
„ Printer Alerts—Displays text messages that alert you of conditions such
as low toner.
24
Working with the Status Monitor
Download from Www.Somanuals.com. All Manuals Search And Download.
„ Recovery Instructions—Provides you with explanations of what you
need to do in order to correct problems and recover from error conditions.
Consumables Tab
Displays the usage status (approximate percentage remaining) of each toner
consumables.
„ Refresh—Rechecks the supplies and displays their status.
ꢀ"
Click Help to display windows containing explanations of the Status
Monitor functions. Refer to this help for detailed information.
Recognizing Status Monitor Alerts
When the Status Monitor detects a printing problem, the icon on the Windows
task bar changes from green (normal) to yellow (warning), magenta or red
(error), depending on the severity of the printer problem.
Recovering from a Status Monitor Alert
When the Status Monitor notifies you of a printing problem, double-click its
icon on the Windows task bar to open the Status Monitor. The Status Monitor
identifies what type of error has occurred.
Closing the Status Monitor
Click Close to close the Status Monitor window. To exit Status Monitor,
right-click the Status Monitor icon in the taskbar, and then click Exit.
25
Recognizing Status Monitor Alerts
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
About the Control Panel
The control panel, located on the top of the printer, allows you to direct the
printer’s operation. In addition, it displays the current status of the printer,
including any condition that needs your attention.
1
4
5
6
3
MESSAGE
WINDOW
2
8
7
Control Panel Indicators and Keys
No.
Indicator
Off
On
1
The printer is not ready The printer is ready to
to accept data.
No problem.
accept data.
(Flashes while data is
being received or while
printing.)
2
The printer requires
operator attention.
(usually accompanied by
a status message in the
message window.)
28
About the Control Panel
Download from Www.Somanuals.com. All Manuals Search And Download.
No.
Key
Function
3
„ Cancels the currently displayed menu or menu
choice
„ Allows you to cancel one or all print jobs that
are currently being printed or processed:
1. Press the Cancel key.
2. Press the
or
keys to select either CUR-
RENT JOBor ALL JOBS.
3. Press the Menu/Select key.
The print job(s) is (are) cancelled.
4
5
„ Enters the menu system
„ Moves down in the menu structure
„ Applies the selected setting
„
appears in the message window
„ Moves the cursor up
„ Returns to the status screen from the help
screen
„ Within a menu choice that is changeable char-
acter by character, scrolls upward through the
available characters
„
,
appears in the message window
6
7
„ Moves the cursor to the right
„ Displays the next help screen
„
appears in the message window
„ Moves the cursor down
„ Displays the help screen when an error occurs
„ Within a menu choice that is changeable char-
acter by character, scrolls downward through
the available characters
„
,
appears in the message window
29
About the Control Panel
Download from Www.Somanuals.com. All Manuals Search And Download.
No.
Key
Function
8
„ Moves the cursor to the left
„ Displays the previous help screen
„
appears in the message window
Message Window
The current status of the printer, the amount of toner remaining, and any error
messages can be viewed from the message window.
1
2
4
MENU
YMCK
3
No.
Details
1
The current status of the printer is displayed.
„ If the operator or service representative must be called, the sym-
bol
and the error status are displayed.
„ If a warning occurs, the symbol
appears.
„ When a digital camera is connected to the KONICA MINOLTA
Digital Camera Direct Print Port with a USB cable, the sym-
bol
appears on the right side of the message window.
„ When a USB memory device is plugged into the KONICA
MINOLTA Digital Camera Direct Print Port, the symbol
pears on the right side of the message window.
ap-
„ While a print job is being received, the symbol
appears on the
right side of the message window. While a camera direct or mem-
ory direct print job is being received, the symbol
appears.
2
„ Error messages are displayed.
„ While a print job is being received, the user name and the print
progress are displayed.
„ While updating the firmware, the type of firmware being updated
and the update progress are displayed.
30
About the Control Panel
Download from Www.Somanuals.com. All Manuals Search And Download.
No.
3
Details
Key information is displayed.
4
The approximate amount of toner remaining is displayed.
Help Screens
The help screens appear when the
key is pressed after an error occured,
such as a media misfeed, so that the error can be corrected.
31
About the Control Panel
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuration Menu Overview
The bizhub C30P configuration menu accessible from the control panel is
structured as shown below.
Main Menu
READY
PROOF/
PRINT MENU*
PRINT
MENU
PAPER
MENU
QUALITY
MENU
MEMORY DIRECT**
CAMERA DIRECT***
INTERFACE
MENU
SYS DEFAULT
MENU
MAINTENANCE
MENU
SERVICE
MENU
ꢀ"
* This menu item appears only if an optional hard disk drive is
installed.
** This menu item appears when INTERFACE MENU/MEMORY
DIRECTis set to ENABLE, and the optional hard disk drive or a Com-
pactFlash card is installed.
*** This menu item appears when INTERFACE MENU/CAMERA
DIRECTis set to ENABLE.
32
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ"
MEMORY DIRECTand CAMERA DIRECTdo not appear if public
user access has not been permitted through authentication settings.
For details on the authentication settings, refer to the bizhub C30P
Reference Guide on the Utilities and Documentation CD-ROM.
33
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
PROOF/PRINT MENU
ꢀ"
This menu item appears only if an optional hard disk drive is installed.
With this menu item, print jobs that were set to be saved on the hard disk by
using Job Retention on the Basic tab of the printer driver can be printed or
deleted.
ꢀ"
All factory default values are shown in bold.
PROOF/
PRINT MENU
“User name”
“Job name”
PRINT
DELETE
“Job name”
“Job name”
COPIES
YES
1
NO
Printing/Deleting a Stored Job
1
Follow the procedure described below to select a job.
Press Key
Until Display Reads
PROOF/PRINT MENU
“User name”
If no print jobs have been stored on the hard disk,
NO STORED JOBappears.
34
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Press Key
Until Display Reads
Desired user name
,
Press until the desired
user name appears.
“Job name”
Desired job name
,
Press until the desired
job name appears.
PRINT
DELETE
If the selected print job was set as a secured job
from the printer driver, a screen for entering the
password appears. For details on typing the
password, refer to “Entering the Password” on page
36.
2
Select PRINTor DELETE, and then press the Menu/Select key.
ꢀ"
If PRINTwas selected, continue with step 3.
If DELETEwas selected, continue with step 5.
3
4
Press the
and
keys to specify the number of copies to be printed.
(Settings: 1to 999; Default: 1)
Press the Menu/Select key.
Printing begins.
5
6
Select YESor NO.
Press the Menu/Select key.
If YESwas selected, the print job is deleted.
If NOwas selected, the PRINT/DELETEselection screen appears
again.
35
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Entering the Password
If the print job selected in the PROOF/PRINTMENUis a secured job, a
screen for entering the password appears. Follow the procedure described
below to type in the four-digit password specified from the printer driver.
1
Press the
password.
and
keys to increase or decrease the first digit of the
2
3
Press the
key to move the cursor to the next digit.
and keys to increase or decrease the second digit of the
Press the
password.
4
5
Continue these steps until all four digits of the password are specified.
Press the Menu/Select key.
The PRINT/DELETEselection screen appears.
ꢀ"
If an incorrect password is entered, INVALID ENTRYappears and
the screen for entering the password appears again.
36
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
PRINT MENU
With this menu, printer information, such as the configuration page and the
demo page, can be printed.
PRINT MENU
CONFIGURATION
PG
STATISTICS PAGE
FONT LIST
POSTSCRIPT
PCL
MENU MAP
DIRECTORY LIST*
ꢀ"
ꢀ"
* This menu item appears only if an optional hard disk drive is
installed.
All factory default values are shown in bold.
Settings
Prints the configuration page.
Settings
CONFIGURA-
TION PG
PRINT/CANCEL
STATISTICS
PAGE
PRINT/CANCEL
Prints the statistics page such as the number of pages
printed.
Settings
Prints the PostScript font list.
Settings
Prints the PCL font list.
FONT LIST POST
PRINT/CANCEL
SCRIPT
PCL
PRINT/CANCEL
37
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Prints the menu map.
Settings
Prints the directory list of the hard disk.
MENU MAP
PRINT/CANCEL
DIRECTORY
LIST
PRINT/CANCEL
38
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
PAPER MENU
With this menu, the paper used for printing can be managed.
PAPER MENU
PAPER SOURCE
DUPLEX***
DEFAULT TRAY
TRAY 1
PAPER SIZE
CUSTOM SIZE*
PAPER TYPE
PAPER SIZE
COPIES
COLLATE****
FINISHING*****
TRAY 2
JOB
PAPER TYPE
PAPER SIZE
SEPARATION*****
TRAY 3**
IMAGE
ROTATION******
PAPER TYPE
PAPER SIZE
TRAY 4**
TRAY CHAINING
TRAY MAPPING
PAPER TYPE
TRAY MAPPING
MODE
LOGICAL TRAY
0
LOGICAL TRAY
9
39
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ"
* This menu item appears only when you select CUSTOMfrom the
TRAY 1/PAPER SIZEmenu.
** These menu items appear only if one or both of the optional lower
feeder units are installed.
*** This menu item appears only if the optional duplex unit (Duplex
Option) is installed.
**** This menu item appears only if the optional hard disk drive or a
CompactFlash card of 1 GB or more is installed.
***** This menu item appears only if the optional staple finisher is
installed.
****** This menu item appears only if the optional staple finisher is not
installed.
40
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ"
PAPER DEFAULT
All factory default values are shown in bold.
Settings
TRAY 1/TRAY 2/
SOURCE TRAY
TRAY 3/TRAY 4
The Lower Feeder Unit that is normally used can be
specified.
ꢀ" TRAY 3and TRAY 4appear only if the
optional lower feeder units are installed.
Settings
TRAY 1 PAPER
ANY/LETTER/LEGAL/
EXECUTIVE/A4/A5/A6/
B5(JIS)/B6(JIS)/GOVT
LETTER/STATEMENT/
FOLIO/SP FOLIO/UK
QUARTO/FOOLSCAP/GOVT
LEGAL/16K/PHOTO
SIZE
10×15/KAI 16/KAI 32/
ENV C5/ENV C6/ENV DL/
ENV MONARCH/ENV
CHOU#3/ENV CHOU#4/
B5(ISO)/ENV #10/ENV
YOU#4/JPOST/JPOST-D/
CUSTOM
Select the setting for the size of paper
loaded into Tray 1.
ꢀ"
Depending on the setting selected
for SYS DEFAULT MENU/
PAPER/UNIT OF MEASURE,
PHOTO 10×15may change to
PHOTO 4×6.
41
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Specify the paper size when custom-sized
paper is loaded into Tray 1.
CUSTOM
SIZE
The setting units can be switched between
millimeters and inches with the SYS
DEFAULT MENU/PAPER/UNIT OF
MEASUREsetting.
Setting range for WIDTH
„ For MILLIMETERS: 92to 216mm
(default)
– 210mm
„ For INCHES: 3.63to 8.50inches
(default)
– 8.26inches
Setting range for LENGTH
„ For MILLIMETERS: 148to 356mm
(default)
– 297mm
„ For INCHES: 5.83to
14.00inches
(default)
– 11.69inches
ꢀ"
This menu item appears only if
PAPER SIZEis set to CUSTOM.
42
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
PAPER
TYPE
ANY/PLAIN PAPER/
RECYCLED/THICK 1/
THICK 2/LABEL/
TRANSPARENCY/
ENVELOPE/POSTCARD/
LETTERHEAD/GLOSSY 1/
GLOSSY 2
Select the setting for the type of paper
loaded into Tray 1.
Settings
TRAY 2 PAPER
SIZE
LETTER/A4
Select the setting for the size of paper
loaded into Tray 2.
Settings
PAPER
TYPE
ANY/PLAIN PAPER/
RECYCLED
Select the setting for the type of paper
loaded into Tray 2.
The size of paper loaded in Tray 3 and
Tray 4 is indicated.
TRAY 3 PAPER
SIZE
TRAY 4
This menu item only shows the current
setting. This setting cannot be changed.
Settings
PAPER
TYPE
ANY/PLAIN PAPER/
RECYCLED
Select the setting for the type of paper
loaded into Tray 3/Tray 4.
Settings
TRAY
ON/OFF
CHAINING
If ONis selected and the specified Lower Feeder Unit
runs out of paper during printing, a Lower Feeder
Unit loaded with paper of the same size is
automatically selected so printing can continue.
If OFFis selected and the specified Lower Feeder
Unit runs out of paper, printing stops.
43
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
TRAY
TRAY
ON/OFF
MAPPING MAPPING
MODE
Select whether or not the Tray Mapping
function is used.
Settings
LOGICAL
TRAY
0-9
PHYSICAL TRAY1/
PHYSICAL TRAY2/
PHYSICAL TRAY3/
PHYSICAL TRAY4
Select the tray that is used for printing
when a print job is received from another
manufacturer’s printer driver.
The default setting for LOGICAL
TRAY 1is PHYSICAL TRAY1. The
default setting for all other trays is PHYS-
ICAL TRAY2.
ꢀ" PHYSICAL TRAY3and
PHYSICAL TRAY4appear only if
an optional lower feeder unit is
installed.
Settings
DUPLEX
OFF/LONG EDGE/SHORT EDGE
If LONG EDGEis selected, the pages will be printed on both sides
of the paper for long-edge binding.
If SHORT EDGEis selected, the pages will be printed on both
sides of the paper for short-edge binding.
The setting specified in the printer driver will override this menu
setting.
Settings
COPIES
COLLATE
1-9999
Specify the number of copies to be printed.
The setting specified in the printer driver will override this menu
setting.
Settings
ON/OFF
If ONis selected, all pages of the document are printed before the
next copy is printed.
If OFFis selected, all copies of the document are not printed
separately.
The setting specified in the printer driver will override this menu
setting.
44
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
FIN-
SUB TRAY/MAIN TRAY/OFFSET/STAPLING
ISHING
When SUB TRAYis selected, the paper is fed to the sub output
tray.
When MAIN TRAYis selected, the paper is fed to the main out-
put tray.
When OFFSETis selected, the paper is fed to the main output
tray with each copy slightly shifted.
When STAPLINGis selected, each copy is stapled and fed to the
main output tray.
The setting specified in the printer driver will override this menu
setting.
Settings
JOB
ON/OFF
SEPA-
RATION
The paper is fed to the main output tray with each print job slightly
shifted.
ꢀ"
ꢀ"
If FINISHINGis set to SUB TRAY, the print jobs are fed
out stacked on top of each other without begin shifted.
If FINISHINGis set to STAPLING, the print jobs are
stapled before being fed out.
Settings
IMAGE
ROTA-
TION
ON/OFF
If ONis selected, the image is rotated 180 degrees before each
copy is fed out. If OFFis selected, the image is not rotated.
ꢀ"
If PAPER TYPEis set to ENVELOPE, the image cannot be
rotated.
45
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
QUALITY MENU
With this menu, settings for the print quality can be specified.
QUALITY MENU
COLOR MODE
BRIGHTNESS
HALFTONE
IMAGE PRINTING
TEXT PRINTING
GRAPHICS
PRINTING
EDGE
ENHANCEMENT
IMAGE PRINTING
TEXT PRINTING
GRAPHICS
PRINTING
EDGE STRENGTH
ECONOMY PRINT
GLOSSY MODE
PCL SETTING
CONTRAST
IMAGE PRINTING
RGB SOURCE
RGB INTENT
RGB GRAY
46
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
TEXT PRINTING
RGB SOURCE
RGB INTENT
RGB GRAY
GRAPHICS
PRINTING
RGB SOURCE
RGB INTENT
RGB GRAY
PS SETTING
IMAGE PRINTING
RGB SOURCE
RGB INTENT
RGB GRAY
DESTINATION
PROF
TEXT PRINTING
RGB SOURCE
RGB INTENT
RGB GRAY
DESTINATION
PROF
GRAPHICS
PRINTING
RGB SOURCE
RGB INTENT
RGB GRAY
DESTINATION
PROF
47
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
SIMULATION
SIMULATION PROF
CALIBRATION
TONE CALIBRATION
AIDC PROCESS
SIMULATION
INTENT
CMYK GRAY
CMYK DENSITY
COLOR
SEPARATION
ꢀ"
COLOR
All factory default values are shown in bold.
Settings
COLOR/GRAYSCALE
MODE
If COLORis selected, the pages are printed in full color.
If GRAYSCALEis selected, the pages are printed in black
and white.
Settings
BRIGHT-
NESS
-15%/-10%/-5%/0%/+5%/+10%/
+15%
The brightness of the printed image can be adjusted.
Settings
HALFTONE IMAGE
LINE ART/DETAIL/
PRINTING
SMOOTH
Select how halftones in images are
reproduced.
If LINE ARTis selected, halftones are
reproduced with high precision.
If DETAILis selected, halftones are
reproduced with detail.
If SMOOTHis selected, halftones are
reproduced with smoothness.
48
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
TEXT
LINE ART/DETAIL/
PRINTING
SMOOTH
Select how halftones in text are
reproduced.
If LINE ARTis selected, halftones are
reproduced with high precision.
If DETAILis selected, halftones are
reproduced with detail.
If SMOOTHis selected, halftones are
reproduced with smoothness.
Settings
GRAPHICS
PRINTING
LINE ART/DETAIL/
SMOOTH
Select how halftones in graphics are
reproduced.
If LINE ARTis selected, halftones are
reproduced with high precision.
If DETAILis selected, halftones are
reproduced with detail.
If SMOOTHis selected, halftones are
reproduced with smoothness.
Settings
EDGE
IMAGE
ON/OFF
ENHANCE- PRINTING
MENT
Select whether image edges are
emphasized.
If ONis selected, the edges are empha-
sized.
If OFFis selected, the edges are not
emphasized.
ꢀ"
If ECONOMY PRINTis set to ON,
the edges cannot be emphasized.
49
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
TEXT
ON/OFF
PRINTING
Select whether text edges are
emphasized.
If ONis selected, the edges are empha-
sized.
If OFFis selected, the edges are not
emphasized.
Settings
GRAPHICS
PRINTING
ON/OFF
Select whether graphic edges are
emphasized.
If ONis selected, the edges are empha-
sized.
If OFFis selected, the edges are not
emphasized.
ꢀ"
If ECONOMY PRINTis set to ON,
the edges cannot be emphasized.
Settings
EDGE
OFF/LOW/MIDDLE/HIGH
STRENGTH
Select the desired amount that edges are emphasized.
If OFFis selected, the edges are not emphasized.
If LOWis selected, the edges are slightly emphasized.
If MIDDLEis selected, the edges are emphasized by an
average amount.
If HIGHis selected, the edges are highly emphasized.
ꢀ"
If OFFis selected, the edges are not emphasized,
even if an EDGE ENHANCEMENTmenu item is set
to ON.
50
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
ECONOMY
PRINT
ON/OFF
Select whether to print graphics with a reduced density by
reducing the amount of toner that is used.
If ONis selected, the amount of toner used is reduced when
printing.
If OFFis selected, the amount of toner used is not reduced
when printing.
ꢀ"
ꢀ"
If GLOSSY MODEis set to ON, the amount of toner
used is not reduced when printing, even if ONwas
selected for this menu item.
If ONis selected, the edges are not emphasized, even
if IMAGE PRINTINGand GRAPHICS PRINTING
of the EDGE ENHANCEMENTmenu item are set to
ON.
Settings
GLOSSY
MODE
ON/OFF
Select whether to relax the limitations on the amount of
toner used in order to widen the color reproduction range
and produce glossy prints.
If ONis selected, glossy prints are produced.
If OFFis selected, glossy prints are not produced.
ꢀ"
If ONis selected, the amount of toner used is not
reduced when printing, even if ECONOMY PRINT
is set to ON.
51
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
PCL
CONTRAST
-15%/-10%/-5%/0%/
SETTING
+5%/+10%/+15%
The contrast of the image can be
adjusted.
Settings
IMAGE
RGB
DEVICE COLOR/
PRINTING
SOURCE
sRGB
Specify the color space for
RGB image data.
If DEVICE COLORis
selected, no color space is
specified.
If RGB source profiles are
downloaded with the Download
Manager, they are available
from the list of settings.
Settings
RGB
VIVID/
INTENT
PHOTOGRAPHIC
Specify the characteristic
applied when converting RGB
image data to CMYK data.
If VIVIDis selected, a vivid
output is produced.
If PHOTOGRAPHICis
selected, a brighter output is
produced.
52
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
RGB
GRAY
COMPOSITE
BLACK/BLACK
AND GRAY/
BLACK ONLY
Specify how black and grays
are reproduced in RGB image
data.
If COMPOSITE BLACKis
selected, black is reproduced
using the CMYK colors.
If BLACK AND GRAYis
selected, black and gray are
reproduced using black only.
If BLACK ONLYis selected,
black is reproduced using only
black.
Settings
TEXT
RGB
DEVICE COLOR/
PRINTING
SOURCE
sRGB
Specify the color space for
RGB text data.
If DEVICE COLORis
selected, no color space is
specified.
If RGB source profiles are
downloaded with the Download
Manager, they are available
from the list of settings.
53
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
RGB
VIVID/
INTENT
PHOTOGRAPHIC
Specify the characteristic
applied when converting RGB
text data to CMYK data.
If VIVIDis selected, a vivid
output is produced.
If PHOTOGRAPHICis
selected, a brighter output is
produced.
Settings
RGB
GRAY
COMPOSITE
BLACK/BLACK
AND GRAY/
BLACK ONLY
Specify how black and grays
are reproduced in RGB text
data.
If COMPOSITE BLACKis
selected, black is reproduced
using the CMYK colors.
If BLACK AND GRAYis
selected, black and gray are
reproduced using black only.
If BLACK ONLYis selected,
black is reproduced using only
black.
Settings
GRAPHICS
PRINTING
RGB
SOURCE
DEVICE COLOR/
sRGB
Specify the color space for
RGB GRAPHICS data.
If DEVICE COLORis
selected, no color space is
specified.
If RGB source profiles are
downloaded with the Download
Manager, they are available
from the list of settings.
54
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
RGB
VIVID/
INTENT
PHOTOGRAPHIC
Specify the characteristic
applied when converting RGB
GRAPHICS data to CMYK
data.
If VIVIDis selected, a vivid
output is produced.
If PHOTOGRAPHICis
selected, a brighter output is
produced.
Settings
RGB
GRAY
COMPOSITE
BLACK/BLACK
AND GRAY/
BLACK ONLY
Specify how black and grays
are reproduced in RGB
GRAPHICS data.
If COMPOSITE BLACKis
selected, black is reproduced
using the CMYK colors.
If BLACK AND GRAYis
selected, black and gray are
reproduced using black only.
If BLACK ONLYis selected,
black is reproduced using only
black.
55
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
PS
IMAGE
RGB
SOURCE
DEVICE COLOR/
sRGB/
SETTINGS PRINTING
AppleRGB/
AdobeRGB1998/
ColorMatchRGB
/
BlueAdjustRGB
Specify the color space for
RGB image data.
If DEVICE COLORis
selected, no color space is
specified.
If RGB source profiles are
downloaded with the Download
Manager, they are available
from the list of settings.
Settings
RGB
VIVID/
INTENT
PHOTOGRAPHIC/
RELATIVE
COLOR/
ABSOLUTE
COLOR
Specify the characteristic
applied when converting RGB
image data to CMYK data.
If VIVIDis selected, a vivid
output is produced.
If PHOTOGRAPHICis
selected, a brighter output is
produced.
If RELATIVE COLORis
selected, relative color is
applied to the RGB source
profile.
If ABSOLUTE COLORis
selected, absolute color is
applied to the RGB source
profile.
56
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
RGB
GRAY
COMPOSITE
BLACK/BLACK
AND GRAY/
BLACK ONLY
Specify how black and grays
are reproduced in RGB image
data.
If COMPOSITE BLACKis
selected, black is reproduced
using the CMYK colors.
If BLACK AND GRAYis
selected, black and gray are
reproduced using black only.
If BLACK ONLYis selected,
black is reproduced using only
black.
Settings
DESTI-
NATION
PROF
AUTO
Specify the destination profile.
If AUTOis selected, a
destination profile that the
printer automatically adapts is
selected based on a
combination of the specified
color matching, halftones and
other profiles.
If destination profiles are
downloaded with the Download
Manager, they are available
from the list of settings.
57
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
TEXT
PRINTING
RGB
SOURCE
DEVICE COLOR/
sRGB/
AppleRGB/
AdobeRGB1998/
ColorMatchRGB
/
BlueAdjustRGB
Specify the color space for
RGB text data.
If DEVICE COLORis
selected, no color space is
specified.
If RGB source profiles are
downloaded with the Download
Manager, they are available
from the list of settings.
Settings
RGB
VIVID/
INTENT
PHOTOGRAPHIC/
RELATIVE
COLOR/
ABSOLUTE
COLOR
Specify the characteristic
applied when converting RGB
text data to CMYK data.
If VIVIDis selected, a vivid
output is produced.
If PHOTOGRAPHICis
selected, a brighter output is
produced.
If RELATIVE COLORis
selected, relative color is
applied to the RGB source
profile.
If ABSOLUTE COLORis
selected, absolute color is
applied to the RGB source
profile.
58
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
RGB
GRAY
COMPOSITE
BLACK/BLACK
AND GRAY/
BLACK ONLY
Specify how black and grays
are reproduced in RGB text
data.
If COMPOSITE BLACKis
selected, black is reproduced
using the CMYK colors.
If BLACK AND GRAYis
selected, black and gray are
reproduced using black only.
If BLACK ONLYis selected,
black is reproduced using only
black.
Settings
DESTI-
NATION
PROF
AUTO
Specify the destination profile.
If AUTOis selected, a
destination profile that the
printer automatically adapts is
selected based on a
combination of the specified
color matching, halftones and
other profiles.
If destination profiles are
downloaded with the Download
Manager, they are available
from the list of settings.
59
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
GRAPHICS
PRINTING
RGB
SOURCE
DEVICE COLOR/
sRGB/
AppleRGB/
AdobeRGB1998/
ColorMatchRGB
/
BlueAdjustRGB
Specify the color space for
RGB image data.
If DEVICE COLORis
selected, no color space is
specified.
If RGB source profiles are
downloaded with the Download
Manager, they are available
from the list of settings.
Settings
RGB
VIVID/
INTENT
PHOTOGRAPHIC/
RELATIVE
COLOR/
ABSOLUTE
COLOR
Specify the characteristic
applied when converting RGB
image data to CMYK data.
If VIVIDis selected, a vivid
output is produced.
If PHOTOGRAPHICis
selected, a brighter output is
produced.
If RELATIVE COLORis
selected, relative color is
applied to the RGB source
profile.
If ABSOLUTE COLORis
selected, absolute color is
applied to the RGB source
profile.
60
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
RGB
GRAY
COMPOSITE
BLACK/BLACK
AND GRAY/
BLACK ONLY
Specify how black and grays
are reproduced in RGB image
data.
If COMPOSITE BLACKis
selected, black is reproduced
using the CMYK colors.
If BLACK AND GRAYis
selected, black and gray are
reproduced using black only.
If BLACK ONLYis selected,
black is reproduced using only
black.
Settings
DESTI-
NATION
PROF
AUTO
Specify the destination profile.
If AUTOis selected, a
destination profile that the
printer automatically adapts is
selected based on a
combination of the specified
color matching, halftones and
other profiles.
If destination profiles are
downloaded with the Download
Manager, they are available
from the list of settings.
61
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
SIMULATION SIMU-
LATION
NONE/SWOP/
Euroscale/
CommercialPre
ss/TOYO/DIC
PROF
Specify the simulation profile.
If NONEis selected, no
simulation profile is specified.
If simulation profiles are
downloaded with the Download
Manager, they are available
from the list of settings.
Settings
SIMU-
LATION
INTENT
RELATIVE
COLOR/
ABSOLUTE
COLOR
Specify the characteristic of the
simulation profile.
If RELATIVE COLORis
selected, relative color is
applied to the simulation
profile.
If ABSOLUTE COLORis
selected, absolute color is
applied to the simulation
profile.
62
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
CMYK
GRAY
COMPOSITE
BLACK/BLACK
AND GRAY/
BLACK ONLY
Specify how black and grays
are reproduced using the four
CMYK colors.
If COMPOSITE BLACKis
selected, black is reproduced
using the CMYK colors.
If BLACK AND GRAYis
selected, black and gray are
reproduced using black only.
If BLACK ONLYis selected,
black is reproduced using only
black.
Settings
CALIBRA- TONE
TION CALIBRATION
ON/OFF
If ONis selected, image adjustments are
applied.
If OFFis selected, image adjustments are
not applied.
Settings
AIDC
EXECUTE/CANCEL
PROCESS
If EXECUTEis selected, image
adjustments are performed immediately.
If CANCELis selected, image adjust-
ments are not performed.
63
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
CMYK
DENSITY
CYAN/ HIGH-
MAGENTA/ LIGHT
YELLOW/
-3/-2/
-1/0/
+1/+2/
+3
BLACK
The density of the
highlight color in
images can be
adjusted.
Settings
MIDDLE
-3/-2/
-1/0/
+1/+2/
+3
The density of the
middle color in
images can be
adjusted.
Settings
SHADOW
-3/-2/
-1/0/
+1/+2/
+3
The density of the
shadow color in
images can be
adjusted.
Settings
COLOR
SEPARA-
TION
ON/OFF
If ONis selected, color separation are performed. The
contents of a color page is separated into the color pages
for yellow, magenta, cyan and black, and each is printed
with black gradations as individual pages. The printing order
is yellow, magenta, cyan, then black.
If OFFis selected, color separation is not performed. A
normal color separation is performed.
64
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMORY DIRECT
This menu item appears when INTERFACE MENU/MEMORY DIRECTis
set to ENABLE, and the optional hard disk drive or a CompactFlash card is
installed.
In addition, this menu item does not appear if public user access has not
been permitted through authentication settings. For details on the authentica-
tion settings, refer to the bizhub C30P Reference Guide on the Utilities and
Documentation CD-ROM.
With this memu, settings for “memory direct” function can be specified.
ꢀ"
For details on memory direct, refer to “Memory Direct” on page 96.
MEMORY DIRECT
LIST OF FILES*
TYPE OF FILES
ꢀ"
ꢀ"
* This menu item appears when a USB memory device is plugged into
the KONICA MINOLTA Digital Camera Direct Print Port.
All factory default values are shown in bold.
Select the file that you wish to output, and then press the Menu/
LIST
Select key.
OF
FILES
If the file to be printed is in a folder, select the folder, and then
press the Menu/Select key.
Settings
Select this setting to output a file.
Settings
Select this setting to stop outputting and to return to the file list.
PRINT
CANCEL
65
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
A4
LETTER/LEGAL/EXECUTIVE/A4/
A5/A6/B5(JIS)/B6(JIS)/GOVT
LETTER/STATEMENT/FOLIO/SP
FOLIO/UK QUARTO/FOOLSCAP/
GOVT LEGAL/16K/PHOTO 10×15/
KAI 16/KAI 32/ENV C5/ENV
C6/ENV DL/ENV MONARCH/ENV
CHOU#3/ENV CHOU#4/B5(ISO)/
ENV #10/ENV YOU#4/JPOST/
JPOST-D/CUSTOM
Change the size of the paper.
ꢀ"
Depending on the setting selected for SYS
DEFAULT MENU/PAPER/UNIT OF
MEASURE, PHOTO 10×15may change to
PHOTO 4×6.
ꢀ"
This menu item does not appear if the
selected file is a PDF file.
Settings
DUPLEX:
OFF
LONG EDGE/SHORT EDGE/OFF
Select whether to perform duplex printing.
If LONG EDGEis selected, the page will be printed
on both sides of the paper for long edge binding.
If SHORT EDGEis selected, the page will be
printed on both sides of the paper for short edge
binding.
If OFFis selected, duplex printing is not performed.
Settings
COPIES:1
1-9999
Specify the number of copies to be printed (between
1and 9999).
66
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
COLLATE
ON/OFF
Select whether to collate the copies.
If ONis selected, collated printing is performed.
If OFFis selected, collated printing is not performed.
ꢀ"
This menu item appears only if the optional
hard disk drive or a CompactFlash card of
1GB or more is installed.
Settings
MAIN
TRAY
SUB TRAY/MAIN TRAY/OFFSET/
STAPLING
Select the output tray and finishing settings.
When SUB TRAYis selected, the paper is fed to
the sub output tray.
When MAIN TRAYis selected, the paper is fed to
the main output tray.
When OFFSETis selected, the paper is fed to the
main output tray with each copy slightly shifted.
When STAPLINGis selected, each copy is stapled
and fed to the main output tray.
ꢀ"
This menu item appears only if the optional
staple finisher is installed.
TYPE
OF
FILES
Settings PDF,JPEG,TIFF/PDF
Select the type of files to be displayed.
67
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
CAMERA DIRECT
This menu item appears when INTERFACE MENU/CAMERA DIRECTis
set to ENABLE.
In addition, this menu item does not appear if public user access has not
been permitted through authentication settings. For details on the authentica-
tion settings, refer to the bizhub C30P Reference Guide on the Utilities and
Documentation CD-ROM.
With this menu, settings for “camera direct” function can be specified.
ꢀ"
These settings are overridden by any settings configured within the
digital camera.
For details on camera direct, refer to “Camera Direct” on page 94.
CAMERA DIRECT
PAPER SOURCE
LAYOUT
PAPER MARGIN
IMAGE QUALITY
BRIGHTNESS
CONTRAST
ECONOMY PRINT
GLOSSY MODE
RGB SOURCE
RGB INTENT
RGB GRAY
HALFTONE
68
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ"
PAPER
All factory default values are shown in bold.
Settings
TRAY1/TRAY2/TRAY3/TRAY4
SOURCE
Select the Lower Feeder Unit that is used for camera direct
printing.
ꢀ" TRAY3and TRAY4appear only if the optional lower
feeder units are installed.
Settings
LAYOUT
1-UP/2-UP/3-UP/4-UP/6-UP/8-UP
Specify the number of images printed on a single sheet of media.
When set to 1-UP, only one image will be printed on a single
sheet of media.
Settings
PAPER
STANDARD/MINIMUM
MARGIN
Select the size of the media margins (area that is not printed in).
If STANDARDis selected, the standard media margin size is
specified.
If MINIMUMis selected, the media margins are reduced.
Settings
IMAGE BRIGHT-
QUAL- NESS
ITY
-15%/-10%/-5%/0%/+5%/+10%/
+15%
The brightness of the printed image can be
adjusted.
Settings
CONTRAST
-15%/-10%/-5%/0%/+5%/+10%/
+15%
The contrast of the image can be adjusted.
Settings
ECONOMY
PRINT
ON/OFF
Select whether to print graphics with a reduced
density by reducing the amount of toner that is used.
If ONis selected, the amount of toner used is
reduced when printing.
If OFFis selected, the amount of toner used is not
reduced when printing.
ꢀ"
If GLOSSY MODEis set to ON, the amount of
toner used is not reduced when printing, even
if ONwas selected for this menu item.
69
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
GLOSSY
MODE
ON/OFF
Select whether to relax the limitations on the amount
of toner used in order to widen the color reproduc-
tion range and produce glossy prints.
If ONis selected, glossy prints are produced.
If OFFis selected, glossy prints are not produced.
ꢀ"
If ONis selected, the amount of toner used is
not reduced when printing, even if ECONOMY
PRINTis set to ON.
Settings
RGB
DEVICE COLOR/sRGB
SOURCE
Specify the color space for RGB image data.
If DEVICE COLORis selected, no color space is
specified.
Settings
RGB
VIVID/PHOTOGRAPHIC
INTENT
Specify the characteristic applied when converting
RGB image data to CMYK data.
If VIVIDis selected, a vivid output is produced.
If PHOTOGRAPHICis selected, a brighter output is
produced.
Settings
RGB GRAY
COMPOSITE BLACK/BLACK AND
GRAY/BLACK ONLY
Specify how black and grays are reproduced in RGB
image data.
If COMPOSITE BLACKis selected, black is
reproduced using the CMYK colors.
If BLACK AND GRAYis selected, black and gray
are reproduced using black only.
If BLACK ONLYis selected, black is reproduced
using only black.
70
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
HALFTONE
LINE ART/DETAIL/SMOOTH
Select how halftones are reproduced.
If LINE ARTis selected, halftones are reproduced
with high precision.
If DETAILis selected, halftones are reproduced
with detail.
If SMOOTHis selected, halftones are reproduced
with smoothness.
71
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
INTERFACE MENU
With this menu, interface settings can be specified.
ꢀ"
Restart the printer after changing settings in the ETHERNETmenu.
INTERFACE MENU
JOB TIMEOUT
ETHERNET
TCP/IP
ENABLE
MEMORY DIRECT**
CAMERA DIRECT
IP ADDRESS
SUBNET MASK
DEFAULT GATEWAY
DHCP/BOOTP
TELNET
NETWARE
ENABLE
APPLETALK
SPEED/DUPLEX
ENABLE
ꢀ"
** This menu item appears only if the optional hard disk drive or a
CompactFlash card is installed.
72
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ"
JOB
TIME-
OUT
All factory default values are shown in bold.
Settings
Specify the timeout interval for a print job being received.
5 seconds-15 seconds-300 seconds
Settings
ETHER- TCP/IP ENABLE
NET
YES/NO
If YESis selected, TCP/IP is enabled.
If NOis selected, TCP/IP is disabled.
Setting
IP
000.000.000.000
ADDRESS
Set the IP address for this printer on the
network.
Use the
,
,
, and
keys to
specify the value.
If the IP address is manually specified,
DHCP/BOOTPis automatically set to
OFF.
Setting
SUBNET
MASK
255.255.000.000
Specify the subnet mask for the network.
Use the , and keys to
specify the value.
Setting
,
,
DEFAULT
GATEWAY
000.000.000.000
Specify the IP address of the router if one
is on the network. Use the
,
,
,
and
keys to specify the value.
Settings
DHCP/
BOOTP
ON/OFF
Select whether or not the IP address is
automatically acquired.
If ONis selected, the IP address is auto-
matically acquired.
If OFFis selected, the IP address is not
automatically acquired.
73
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
TELNET
ENABLE/DISABLE
Select whether to enable or disable Tel-
net transmissions.
When ENABLEis selected, Telnet trans-
missions are enabled.
When DISABLEis selected, Telnet
transmissions are disabled.
Settings
NETWARE ENABLE
YES/NO
If YESis selected, NetWare is enabled.
If NOis selected, NetWare is disabled.
Settings
APPLE
TALK
ENABLE
YES/NO
If YESis selected, AppleTalk is enabled.
If NOis selected, AppleTalk is disabled.
Settings
SPEED/
DUPLEX
AUTO/10BASE FULL/10BASE
HALF/100BASE FULL/100BASE
HALF/1000BASE FULL
Specify the transmission speed for the network and
the transmission method for bi-directional
transmission.
Settings
MEMORY
DIRECT
ENABLE/DISABLE
Select whether to enable or disable memory direct printing.
If ENABLEis selected, memory direct printing is enabled.
If DISABLEis selected, memory direct printing is disabled.
Settings
CAMERA
DIRECT
ENABLE/DISABLE
Select whether to enable or disable camera direct printing.
If ENABLEis selected, camera direct printing is enabled.
If DISABLEis selected, camera direct printing is disabled.
74
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
SYS DEFAULT MENU
With this menu, settings can be specified to adjust the operation of the printer,
such as the display language of the message window and the time until the
machine enters Energy Saver mode.
SYS DEFAULT MENU
LANGUAGE
EMULATION
DEF.
EMULATION
POSTSCRIPT
WAIT
TIMEOUT
PS ERROR
PAGE
PS PROTOCOL
PCL
CR/LF
MAPPING
LINES PER
PAGE
FONT SOURCE
FONT NUMBER
PITCH SIZE
(POINT SIZE)
SYMBOL SET
PAPER SIZE
CUSTOM SIZE
PAPER TYPE
PAPER
DEFAULT
PAPER
UNIT OF
MEASURE
GRAYSCALE
PAGE
STARTUP
OPTIONS
DO STARTUP
PAGE
AUTO
CONTINUE
75
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
HOLD JOB
TIMEOUT*
ENERGY
SAVER
ENERGY
SAVER TIME**
MENU
TIMEOUT
LCD
CONTRAST
SECURITY
CHANGE
PASSWORD
LOCK PANEL
CLOCK
DATE
(xx.xx.xx)
TIME
TIME ZONE
HDD FORMAT*
USER AREA
ONLY
ALL
CARD FOR-
MAT***
USER AREA
ONLY
ALL
RESTORE
NETWORK
RESTORE
DEFAULTS
RESTORE
PRINTER
RESTORE ALL
76
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
ENABLE
WARNING
PAPER EMPTY
TONER LOW
TRAY1
TRAY2
TRAY3****
TRAY4****
I-UNIT LOW
ꢀ"
* These menu items appear only if an optional hard disk drive is
installed.
** This menu item appears when you select except OFFfrom the
ENERGY SAVERmenu.
*** This menu item appears only if an optional CompactFlash card is
installed.
**** These menu items appear only if corresponding optional lower
feeder unit is installed.
77
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ"
All factory default values are shown in bold.
Settings
LAN-
GUAGE
ENGLISH/FRENCH/GERMAN/SPANISH/
ITALIAN/PORTUGUESE/CZECH/JAPANESE/
KOREAN/SIMPLIFIED CHINESE/
TRADITIONAL CHINESE/DUTCH
The display language of the message window can be changed
to the selected language.
The language selections appear in the message window in the
corresponding language. For example, GERMANappears as
DEUTSCH.
Settings
EMULA- DEF.
TION EMULA-
TION
AUTO/POSTSCRIPT/PCL
Specify the printer emulation language.
If AUTOis selected, the printer automatically selects
the printer emulation language from the data stream.
Settings
POST- WAIT
0-300
SCRIPT TIME
OUT
Specify the time until an error is
determined to be a PostScript error.
If 0is selected, no timeout is performed.
Settings
PS
ON/OFF
ERROR
PAGE
Select whether or not an error page is
printed when a Postscript error occurs.
Settings
PS
AUTO/NORMAL/BINARY
PROTO-
COL
Specify the protocol for data transmissions
with a PostScript data stream.
If AUTOis selected, the printer
automatically selects an applicable
protocol from the data stream.
78
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
PCL
CR/LF
MAP-
PING
CR=CR LF=LF/CR=CRLF
LF=LF/CR=CR
LF=LFCR/CR=CRLF
LF=LFCR
Select the definitions of the CR/LF codes
in the PCL language.
Settings
LINES
PER
PAGE
5-60-128
Specify the number of lines per page in the
PCL language.
Settings
FONT FONT
0-102
SOURCE NUMBER
Specify the default font in the
PCL language.
The font numbers that appear
correspond to the PCL font list.
For details on printing the font
list, refer to “PRINT MENU” on
page 37.
Settings
PITCH
SIZE
0.44-10.00-
99.99
(POINT
SIZE)
(4.00-12.00-
999.75)
Specify the font size in the PCL
language.
If the selected FONTNUMBER
is for a bitmap font, PITCH
SIZEappears. If the selected
FONT NUMBERis for an
outline font, POINT SIZE
appears.
Specify the symbol set used
with the PCL language.
SYMBOL
SET
The default setting is PC8.
79
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
PAPER DEFAULT PAPER
PAPER SIZE
LETTER/LEGAL/EXECU-
TIVE/A4/A5/A6/
B5(JIS)/B6(JIS)/GOVT
LETTER/STATEMENT/
FOLIO/SP FOLIO/UK
QUARTO/FOOLSCAP/GOVT
LEGAL/16K/PHOTO
10×15/KAI 16/KAI 32/
ENV C5/ENV C6/ENV DL/
ENV MONARCH/ENV
CHOU#3/ENV CHOU#4/
B5(ISO)/ENV #10/ENV
YOU#4/JPOST/JPOST-D/
CUSTOM
Select the size of media that is normally
used.
ꢀ"
Depending on the setting selected
for SYS DEFAULT MENU/
PAPER/UNIT OF MEASURE,
PHOTO 10×15may change to
PHOTO 4×6.
80
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOM Specify the media size when PAPER
SIZE SIZEis set to CUSTOM.
The setting units can be switched between
millimeters and inches with the SYS
DEFAULT MENU/PAPER/UNIT OF
MEASUREsetting.
Setting range for WIDTH
„ For MILLIMETERS: 92to 216mm
(default)
– 210mm
„ For INCHES: 3.63to 8.50inches
(default)
– 8.26inches
Setting range for LENGTH
„ For MILLIMETERS: 148to 356mm
(default)
– 297mm
„ For INCHES: 5.83to
14.00inches
(default)
– 11.69inches
81
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
PAPER
TYPE
PLAIN PAPER/
RECYCLED/THICK 1/
THICK 2/LABEL/
TRANSPARENCY/
ENVELOPE/POSTCARD/
LETTERHEAD/GLOSSY 1/
GLOSSY 2
Select the type of media that is normally
used.
Settings
UNIT
OF
MEA-
SURE
INCHES/MILLIMETERS
The units for specifying the size of custom media can
be switched between inches and millimeters.
GRAY
SCALE
PAGE
Settings AUTO/GRAYSCALE PRINT/COLOR PRINT
Specify the operation to be performed for black-and-white
pages in a job specified for color printing.
If AUTOis selected, printing is automatically performed accord-
ing to the first page of the job.
If GRAYSCALE PRINTis selected, black-and-white printing is
automatically performed depending on each page.
If COLOR PRINTis selected, color printing is performed, even
for a black-and-white page.
Settings
STARTUP DO
OPTIONS START-
UP
ON/OFF
Select whether or not a startup page is printed when
the printer is turned on.
PAGE
Settings
AUTO
CON-
TINUE
ON/OFF
Select whether or not printing continues if the size or type of
media for the print job.
If AUTO CONTINUEis set to ON, printing automatically contin-
ues after about 10 seconds under the following conditions. At
this time, printing will be performed even if the media size is dif-
ferent.
No media: PAPER EMPTY (Page 220)/TRAY EMPTY (Page
222)
Different media size/type: PAPER ERROR (Page 220)/TRAY x
PAPER ERR (Page 222)
82
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
HOLD
JOB
DISABLE/1 hour/4 hours/1 day/
1 week
TIME
OUT
Specify the length of time until print jobs saved on the hard disk
are deleted. If DISABLEis selected, print jobs are not deleted
at a specific time.
Settings
ENERGY
SAVER
ON/OFF
If ONis selected, the machine enters Energy Saver mode
according to the length of time specified for ENERGY SAVER
TIME.
If OFFis selected, the machine will not enter Energy Saver
mode.
Settings
ENERGY
SAVER
TIME
5 minutes/15 minutes/30 minutes/
1 hour/3 hours
Specify the length of time until the machine enters Energy
Saver mode.
This menu item appears only when ENERGY SAVERis set to
ON.
Settings
MENU
TIME
OUT
OFF/1 minute/2 minutes
Specify the length of time until the status screen is displayed
when no operation is performed while a menu or help screen is
displayed in the message window. If OFFis selected, no
timeout occurs.
Settings
LCD
-3/-2/-1/0/+1/+2/+3
CON-
TRAST
Adjust the contrast of the message window.
The darkest level setting is -3and the brightest level setting is
+3.
83
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Specify the password for locking the control panel.
SECU- CHANGE
RITY PASS-
WORD
If the password is set to 0000(default), the control
panel is not locked. In order to lock the control panel,
be sure to specify a password other than 0000.
Settings
LOCK
OFF/MINIMUM/ON
PANEL
Specify how the control panel is locked.
If OFFis selected, the control panel is not locked.
If MINIMUMis selected, the INTERFACE MENU
and SYS DEFAULT MENUare protected with a
password.
If ONis selected, all menus are protected with a
password.
In order to lock the control panel, be sure to specify a
password other than 0000.
Specify the date for the printer’s internal clock.
CLOCK DATE
(xx.xx.
xx)
Specify the time for the printer’s internal clock.
TIME
Settings
TIME
ZONE
-12:00-00:00-+13:00
Specify the time zone.
Initialize the user area of the hard disk. When this
menu item is selected, the printer is automatically
restarted.
HDD
FORMAT AREA
ONLY
USER
Initialize the hard disk. When this menu item is
selected, the printer is automatically restarted.
ALL
Initialize the user area of the compactflash card.
When this menu item is selected, the printer is
automatically restarted.
CARD USER
FORMAT AREA
ONLY
Initialize the compactflash card. When this menu item
is selected, the printer is automatically restarted.
ALL
84
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Reset the network settings to their defaults. When
this menu item is selected, the printer is
automatically restarted.
RESTORE RESTORE
DEFAULTS NETWORK
Reset the printer settings to their defaults. When this
menu item is selected, the printer is automatically
restarted.
RESTORE
PRINTER
Reset all settings to their defaults. When this menu
item is selected, the printer is automatically restarted.
RESTORE
ALL
Settings
ENABLE PAPER TRAY1
WARNING EMPTY
ON/OFF
Select whether or not a warning appears
when Tray 1 runs out of media.
Settings
TRAY2
TRAY3
TRAY4
ON/OFF
Select whether or not a warning appears
when Tray 2 runs out of media.
Settings
ON/OFF
Select whether or not a warning appears
when Tray 3 runs out of media.
Settings
ON/OFF
Select whether or not a warning appears
when Tray 4 runs out of media.
TONER Settings ON/OFF
LOW
When set to ON, Toner low message will show up on
the control panel when one or more toner cartridges
reach to the low condition.
Settings
I-UNIT
LOW
ON/OFF
Select whether or not a warning appears when the
print unit is about to reach the end of its service life.
85
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE MENU
With this menu, maintenance on this printer can be performed.
In order to use this menu, the administrator password must be entered.
MAINTENANCE MENU
PRINT MENU
EVENT LOG
HALFTONE 64
HALFTONE 128
HALFTONE 256
GRADATION
CYAN/MAGENTA/
YELLOW/BLACK 64
CYAN/MAGENTA/
YELLOW/BLACK 128
CYAN/MAGENTA/
YELLOW/BLACK 256
ALIGNMENT
TOP
PLAIN PAPER
ADJUSTMENT
THICK
ENVELOPE
TRANSPARENCY
LEFT
ADJUSTMENT
LEFT ADJ
TRAY 1-4
LEFT
ADJ DUPLEX
LEFT ADJ
TRAY 1-4
TRANSFER
POWER
SIMPLEX PASS
PLAIN PAPER
TRANSPARENCY
THICK 1
THICK 2
POSTCARD
86
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
ENVELOPE
LABEL
GLOSSY 1
GLOSSY 2
DUPLEX PASS
PLAIN PAPER
PLAIN PAPER
THICK 1
MANUAL
DUPLEX
IMG ADJ
THICK
CYAN
MAGENTA
THICK 2
YELLOW
BLACK
POSTCARD
ENVELOPE
LABEL
IMG ADJ
BLACK
GLOSSY 1
GLOSSY 2
SUPPLIES
REPLACE
TRANS. BELT
TRANS.
ROLLER
FUSER UNIT
87
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ"
All factory default values are shown in bold.
Settings
Prints the event log.
Settings
PRINT EVENT
MENU LOG
PRINT/CANCEL
HALF- CYAN/
PRINT/CANCEL
TONE
64
MAGENTA/
YELLOW/
BLACK
64
Print cyan/magenta/yellow/black half-
tones at 64 gradations.
Settings
HALF- CYAN/
PRINT/CANCEL
TONE
128
MAGENTA/
YELLOW/
BLACK
128
Print cyan/magenta/yellow/black half-
tones at 128 gradations.
Settings
HALF- CYAN/
PRINT/CANCEL
TONE
256
MAGENTA/
YELLOW/
BLACK
256
Print cyan/magenta/yellow/black half-
tones at 256 gradations.
Settings
GRADA-
TION
PRINT/CANCEL
Prints the gradation.
Settings
-15-15
ALIGN- TOP
PLAIN
MENT ADJUST PAPER
MENT
When printing on plain paper, specify the
size of the top margin.
Settings
THICK
-15-15
When printing on thick paper, specify the
size of the top margin.
Settings
ENVE-
LOPE
-15-15
When printing on envelope, specify the
size of the top margin.
Settings
TRANS-
-15-15
PARENCY
When printing on transparency, specify
the size of the top margin.
88
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
LEFT LEFT
ADJUST ADJ
MENT TRAY1
-15-15
When printing on media in Tray 1, specify
the size of the left margin.
Settings
LEFT
ADJ
TRAY2
-15-15
When printing on media in Tray 2, specify
the size of the left margin.
Settings
LEFT
ADJ
TRAY3
-15-15
When printing on media in Tray 3, specify
the size of the left margin.
Settings
LEFT
ADJ
TRAY4
-15-15
When printing on media in Tray 4, specify
the size of the left margin.
Settings
LEFT LEFT
-15-15
ADJ
ADJ
When duplex printing on media in Tray 1,
specify the size of the left margin.
DUPLEX TRAY1
Settings
LEFT
ADJ
TRAY2
-15-15
When duplex printing on media in Tray 2,
specify the size of the left margin.
Settings
LEFT
ADJ
TRAY3
-15-15
When duplex printing on media in Tray 3,
specify the size of the left margin.
Settings
LEFT
ADJ
TRAY4
-15-15
When duplex printing on media in Tray 4,
specify the size of the left margin.
Settings
TRANS- SIM- PLAIN
-8-7
FER
POWER PASS
PLEX PAPER
When printing on plain paper
using simplex pass, correct
the secondary image transfer
current.
Settings
TRANS-
-8-7
PARENCY
When printing on transparency
using simplex pass, correct
the secondary image transfer
current.
89
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
THICK
1
-8-7
When printing on thick 1 using
simplex pass, correct the sec-
ondary image transfer current.
Settings
THICK
2
-8-7
When printing on thick 2 using
simplex pass, correct the sec-
ondary image transfer current.
Settings
POST-
CARD
-8-7
When printing on postcard
using simplex pass, correct
the secondary image transfer
current.
Settings
ENVELO
PE
-8-7
When printing on envelope
using simplex pass, correct
the secondary image transfer
current.
Settings
LABEL
-8-7
When printing on LABEL using
simplex pass, correct the sec-
ondary image transfer current.
Settings
GLOSSY
1
-8-7
When printing on GLOSSY 1
using simplex pass, correct
the secondary image transfer
current.
Settings
GLOSSY
2
-8-7
When printing on GLOSSY 2
using simplex pass, correct
the secondary image transfer
current.
Settings
DUPLEX PLAIN
-8-7
PASS
PAPER
When printing on plain paper
using duplex pass, correct the
secondary image transfer cur-
rent.
90
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
MANUAL PLAIN
DUPLEX PAPER
-8-7
When printing on plain paper
using manual duplex pass,
correct the secondary image
transfer current.
Settings
THICK
1
-8-7
When printing on THICK 1
using manual duplex pass,
correct the secondary image
transfer current.
Settings
THICK
2
-8-7
When printing on THICK 2
using manual duplex pass,
correct the secondary image
transfer current.
Settings
POST-
CARD
-8-7
When printing on POST-
CARD using manual duplex
pass, correct the secondary
image transfer current.
Settings
ENVE-
LOPE
-8-7
When printing on ENVELOPE
using manual duplex pass,
correct the secondary image
transfer current.
Settings
LABEL
-8-7
When printing on LABEL using
manual duplex pass, correct
the secondary image transfer
current.
Settings
GLOSSY
1
-8-7
When printing on GLOSSY 1
using manual duplex pass,
correct the secondary image
transfer current.
91
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
GLOSSY
2
-8-7
When printing on GLOSSY 2
using manual duplex pass,
correct the secondary image
transfer current.
Settings
IMG
CYAN
-5-0-5
ADJ
THICK
When printing on thick paper, adjust the
cyan in the image.
Settings
MAGENTA
YELLOW
BLACK
Settings
-5-0-5
When printing on thick paper, adjust the
magenta in the image.
Settings
-5-0-5
When printing on thick paper, adjust the
yellow in the image.
Settings
-5-0-5
When printing on thick paper, adjust the
black in the image.
IMG
-2-0-2
ADJ
BLACK
When printing in grayscale, adjust the black in the
image.
SUP- RE-
TRANS. Settings YES/NO
PLIES PLACE BELT
Reset the service life counter for the
transfer belt unit.
Settings
TRANS.
ROLLER
YES/NO
Reset the service life counter for the
transfer roller.
FUSER Settings YES/NO
UNIT
Reset the service life counter for the
fuser unit.
SERVICE MENU
With this menu, the service representative can adjust the printer and perform
maintenance operations. This menu cannot be used by the user.
92
Configuration Menu Overview
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera Direct
If a digital camera with PictBridge (1.0 or later) is connected to the printer
through the Camera Direct Print port, images stored on the digital camera can
be printed directly from the printer.
ꢀ"
ꢀ"
For details on using the digital camera, refer to your digital cameras
manual.
The following features are not supported with Camera Direct.
- DPOF AUTOPRINT image print
- Cropping print
- Borderless
- Print quality (printer setup)
- Paper type (printer setup)
- DPOF cable disconnect recovery
Printing Directly from a Digital Camera
1
Source, Layout, Paper Marginand Image Quality.
ꢀ"
ꢀ"
The Media Type setting that is used is the default printer setting
that is selected.
The Media Type setting cannot be selected from the digital cam-
era.
If these settings can be specified from the digital camera, they do
not need to be specified from the control panel. These settings are
overridden by settings configured within the digital camera.
For details on control panel settings, refer to “CAMERA DIRECT”
on page 68.
2
Connect the USB cable to the dig-
ital camera and to the KONICA
MINOLTA Digital Camera Direct
Print Port.
ꢀ"
A USB cable is not
included with the printer
and must be purchased
separatelly, if not supplied
with your digital camera.
3
4
From the digital camera, specify
the image that you wish to print and the desired number of copies.
Start printing from the digital camera.
94
Camera Direct
Download from Www.Somanuals.com. All Manuals Search And Download.
PDF, JPEG and TIFF files saved on USB memory devices can be printed by
plugging the USB memory device into the printer.
ꢀ"
ꢀ"
Memory direct can be used only if the optional hard disk drive or a
CompactFlash card is installed.
In order to perform collated printing with memory direct, the optional
hard disk drive or a CompactFlash card of 1 GB or more must be
installed.
For details on specifying settings with the control panel, refer to
“MEMORY DIRECT” on page 65.
Printing From a Connected USB Memory Device
1
Plug the USB memory device
into the KONICA MINOLTA Digi-
tal Camera Direct Print Port.
The USB icon appears in the
upper-right corner of the mes-
sage window, and the Memory
Directmenu appears.
2
3
Select LIST OF FILES, and then press the Menu/Select key.
ꢀ"
When all files (PDF, JPEG and TIFF) are displayed, select Type
OF FILES, and then press the Menu/Select key.
From the file list, select the file that you wish to print, and then press the
Menu/Select key.
If the file to be printed is in a folder, select the folder, and then press the
Menu/Select key.
ꢀ"
ꢀ"
A maximum of 99 folders and files can be displayed.
Up to 8 folder levels can be displayed.
4
Select PRINT, and then press the Menu/Select key.
When printing is finished, the status screen appears again.
ꢀ"
ꢀ"
Settings can be specified for the paper size, duplex printing, num-
ber of copies, collating, the output tray, and finishing.
Do not unplug the USB memory device from the KONICA
MINOLTA Digital Camera Direct Print Port during memory direct
printing.
96
Memory Direct
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Specifications
What types and sizes of media can I load?
Media
Media Size
Tray*
Duplex
(Double-Sided)
Inch
8.5 x 11.0
Millimeter
Letter
215.9 x 279.4
215.9 x 355.6
139.7 x 215.9
184.0 x 267.0
210.0 x 297.0
148.0 x 210.0
105.0 x 148.0
182.0 x 257.0
128.0 x 182.0
210.0 x 330.0
215.9 x 322.3
203.2 x 330.2
203.2 x 254.0
203.2 x 266.7
216.0 x 330.2
100.0 x 150.0
195.0 x 270.0
185.0 x 260.0
130.0 x 185.0
100.0 x 148.0
148.0 x 200.0
176.0 x 250.0
104.8 x 241.3
110.0 x 220.0
162.0 x 229.0
114.0 x 162.0
98.4 x 190.5
120.0 x 235.0
90.0 x 205.0
105.0 x 235.0
92.0 x 148.0
216.0 x 1200.0
1/2/3/4
Yes
Yes
No
Legal
8.5 x 14.0
5.5 x 8.5
7.25 x 10.5
8.2 x 11.7
5.9 x 8.3
4.1 x 5.8
7.2 x 10.1
5.0 x 7.2
8.3 x 13.0
8.5 x 12.7
8.0 x 13.0
8.0 x 10.0
8.0 x 10.5
8.5 x 13.0
4.0 x 6.0
7.7 x 10.6
7.3 x 10.2
5.1 x 7.3
3.9 x 5.8
5.8 x 7.9
6.9 x 9.8
4.126 x 9.5
4.3 x 8.7
6.4 x 9.0
4.5 x 6.4
3.875 x 7.5
4.7 x 9.2
3.5 x 8.1
4.1 x 9.3
3.6 x 5.9
8.5 x 47.2
1/3/4
Statement
Executive
A4
1
1/3/4
Yes
Yes
No
1/2/3/4
A5
1
A6
1
No
B5 (JIS)
B6
1/3/4
Yes
No
1
1
Folio
Yes
Yes
Yes
No
SP Folio
Foolscap
UK Quarto
1
1
1
Government Letter
Government Legal
Photo Size 4" x 6"/10 x 15
16 K
1
Yes
Yes
No
1/3/4
1
1
Yes
Yes
No
Kai 16
1
Kai 32
1
Japanese Postcard
Japanese Postcard-D
B5 (ISO)
1
No
1
No
1
No
Envelope Com10
Envelope DL
1
No
1
No
Envelope C5
1
No
Envelope C6
1
No
Envelope Monarch
Envelope Chou #3
Envelope Chou #4
Envelope You #4
Custom, Minimum
Custom, Maximum
1
No
1
No
1
No
1
No
1
No**
No***
1****
Notes:
*
Tray 1= Manual feed tray
Tray 3/4 = Lower feeder units (optional)
** The minimum possible size for duplex (Double-Sided) printing is B5(JIS).
*** The maximum possible size for duplex printing is Legal.
**** Banner paper longer than 355.6 mm (14.0") can only be fed through Tray 1 one sheet
at a time.
98
Media Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ"
For custom sizes, use the printer driver to specify the settings within
the ranges shown in the above table.
Media Types
Before purchasing a large quantity of special media, do a trial print
with the same media and check the print quality.
Keep media on a flat, level surface in its original wrapper until it is time to
load it. For a list of approved media, refer to printer.konicaminolta.com.
Plain Paper (Recycled Paper)
Capacity
Tray 1
Up to 100 sheets, depending on the paper
(Manual Feed weight.
Tray)
Tray 2/3/4
Up to 500 sheets, depending on the paper
weight.
Orientation Tray 1
(Manual Feed
Face down
Tray)
Tray 2/3/4
Face up
Driver
Plain Paper (Recycled)
Media Type
Weight
60–90 g/m² (16–24 lb bond)
Duplexing See page 98 for supported sizes.
Glossy
Mode
ON/OFFSupported
ꢀ"
Glossy mode is Disabled at Grayscale (Color Mode), or
Duplex Print.
Use media that is
Suitable for plain paper laser printers, such as standard or recycled office
paper.
Note
Do not use the media types listed below. These could cause poor print
quality, media misfeeds, or damage to the printer.
DO NOT use media that is
„ Coated with a processed surface (such as carbon paper, and colored
paper that has been treated)
99
Media Types
Download from Www.Somanuals.com. All Manuals Search And Download.
„ Carbon backed
„ Unapproved iron-on transfer media (such as heat-sensitive paper,
heat-pressure paper, and heat-press transfer paper)
„ Cold-water-transfer paper
„ Pressure sensitive
„ Designed specifically for inkjet printers (such as superfine paper, glossy
paper, glossy film, and postcards)
„ Paper that has already been printed on
– Paper that has been printed on with an inkjet printer
– Paper that has been printed on with a monochrome/color laser printer/
copier
– Paper that has been printed on with a heat-transfer printer
– Paper that has been printed on with any other printer or fax machine
„ Dusty
„ Wet (or damp)
ꢀ"
Keep media between 35% and 85% relative humidity. Toner does
not adhere well to moist or wet paper.
„ Layered
„ Adhesive
„ Folded, creased, curled, embossed, warped, or wrinkled
„ Perforated, three-hole punched, or torn
„ Too slick, too coarse, or too textured
„ Different in texture (roughness) on the front and back
„ Too thin or too thick
„ Stuck together with static electricity
„ Composed of foil or gilt; too luminous
„ Heat sensitive or cannot withstand the fusing temperature (180°C
[356°F])
„ Irregularly shaped (not rectangular or not cut at right angles)
„ Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons
„ Acidic
„ Any other media that is not approved
100
Media Types
Download from Www.Somanuals.com. All Manuals Search And Download.
Thick Stock
Paper thicker than 90 g/m2 (24 lb bond) is referred to as thick stock. Test all
thick stock to ensure acceptable performance and to ensure that the image
does not shift.
Capacity
Tray 1
Up to 20 thick stock sheets, depending on
(Manual Feed their thickness.
Tray)
Tray 2/3/4
Not supported
Orientation Face down
Thick 1 (91-150 g/m2)
Thick 2 (151-210 g/m2)
Driver
Media Type
Weight
91–210 g/m² (25–55.9 lb bond)
Duplexing Not supported
Glossy
Mode
ON/OFFSupported
ꢀ"
Glossy mode is Disabled at Grayscale (Color Mode), or
Duplex Print.
ꢀ"
Banner Paper
Weight: 127-160g/m2
Width: 216mm
Length: 357-1200mm
DO NOT use thick stock that is
„ Mixed with any other media in Tray 1 (as this will cause printer misfeed-
ing)
Envelopes
Print on the front (address) side only. Some parts of the envelope consist of
three layers of paper—the front, back, and flap. Anything printed in these lay-
ered regions may be lost or faded.
Capacity
Tray 1
Up to 10 envelopes, depending on their
(Manual Feed thickness
Tray)
Tray 2/3/4
Orientation Face down
Not supported
Driver
Envelope
Media Type
Weight
91–163 g/m² (25–43 lb bond)
101
Media Types
Download from Www.Somanuals.com. All Manuals Search And Download.
Duplexing Not supported
Glossy
Mode
Not supported
Use envelopes that are
„ Common office envelopes approved for laser printing with diagonal joints,
sharp folds and edges, and ordinary gummed flaps
ꢀ"
Because the envelopes pass through heated rollers, the gummed
area on the flaps may seal. Using envelopes with emulsion-based
glue avoids this problem.
„ Approved for laser printing
„ Dry
DO NOT use envelopes that have
„ Sticky flaps
„ Tape seals, metal clasps, paper clips, fasteners, or peel-off strips for seal-
ing
„ Transparent windows
„ Too rough of a surface
„ Material that will melt, vaporize, offset, discolor, or emit dangerous fumes
„ Been presealed
Labels
A sheet of labels consists of a face sheet (the printing surface), adhesive, and
a carrier sheet:
„ The face sheet must follow the plain paper specification.
„ The face sheet surface must cover the entire carrier sheet, and no adhe-
sive should come through on the surface.
You can print continuously with label sheets. However, this could affect the
media feed, depending on the media quality and printing environment. If
problems occur, stop the continuous printing and print one sheet at a time.
Try printing your data on a sheet of plain paper first to check placement.
Check your application documentation for more information on printing labels.
Capacity
Tray 1
Up to 20 label sheets, depending on their
(Manual Feed thickness
Tray)
Tray 2/3/4
Orientation Face down
Not supported
102
Media Types
Download from Www.Somanuals.com. All Manuals Search And Download.
Driver
Label
Media Type
Weight
60–163 g/m² (16–43 lb bond)
Duplexing Not supported
Glossy
Mode
ON/OFFSupported
ꢀ"
Glossy mode is Disabled at Grayscale (Color Mode), or
Duplex Print.
Use label sheets that are
„ Recommended for laser printers
„ Letter or A4 size (adhesive label stock)
DO NOT use label sheets that
„ Have labels that easily peel off or have parts of the label already removed
„ Have backing sheets that have peeled away or have exposed adhesive
ꢀ"
Labels may stick to the fuser, causing them to peel off and media
misfeeds to occur.
„ Are precut or perforated
OK to use
Do not use
Shiny backed paper
Full-page labels
(uncut)
Letterhead
Try printing your data on a sheet of plain paper first to check placement.
Capacity Tray 1 Up to 20 sheets, depending on their size and
(Manual Feed thickness
Tray)
Tray 2/3/4
Orientation Face down
Not supported
Driver
Letterhead
Media Type
103
Media Types
Download from Www.Somanuals.com. All Manuals Search And Download.
Weight
60–90 g/m² (16–24 lb)
Duplexing See page 98 for supported sizes.
Glossy
Mode
ON/OFFSupported
ꢀ"
Glossy mode is Disabled at Grayscale (Color Mode), or
Duplex Print.
Postcards
Try printing your data on a sheet of plain paper first to check placement.
Capacity Tray 1 Up to 20 postcards, depending on their
(Manual Feed thickness
Tray)
Tray 2/3/4
Orientation Face down
Not supported
Driver
Postcard
Media Type
Weight
60–163 g/m² (16–90 lb bond)
Duplexing Not supported
Glossy
Mode
ON/OFFSupported
ꢀ"
Glossy mode is Disabled at Grayscale (Color Mode), or
Duplex Print.
Use postcards that are
„ Approved for laser printers
DO NOT use postcards that are
„ Coated
„ Designed for inkjet printers
„ Precut or perforated
„ Preprinted or multicolored
ꢀ"
If the postcard is warped, press on the warped
area before putting it in Tray 1.
104
Media Types
Download from Www.Somanuals.com. All Manuals Search And Download.
Transparencies
ꢀ"
ꢀ"
ꢀ"
Do not fan transparencies before loading them. Resulting static elec-
tricity may cause printing errors.
If you touch the face of the transparencies with your bare hands, print
quality may be affected.
Keep the printer path clean. Transparencies are especially sensitive to
a dirty media path. If there are shadows on either the top or the bottom
of the sheets, see chapter 9, “Maintaining the Printer” .
ꢀ"
Remove transparencies as soon as possible from the output tray to
avoid static buildup.
You can print continuously with transparencies. However, this could affect the
media feed, depending on the media quality, static buildup, and printing envi-
ronment.
Try printing your data on a sheet of plain paper first to check placement.
ꢀ"
If you have problems feeding 20 sheets, try loading only 1–10 sheets
at a time. Loading a large number of transparencies at one time may
cause static buildup, thus causing feeding problems.
Capacity
Tray 1
Up to 20 transparencies, depending on their
(Manual Feed thickness
Tray)
Tray 2/3/4
Orientation Face down
Not supported
Driver
Transparency
Media Type
Duplexing Not supported
Glossy
Mode
Not supported
ꢀ"
Always first test a small quantity of a particular type of transparency.
Use transparencies that are
„ Approved for laser printing
DO NOT use transparencies that
„ Have static electricity that will cause them to stick together
„ Are specified for inkjet printers only
105
Media Types
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossy Media
Test all glossy media to ensure acceptable performance and to ensure that
the image does not shift.
Capacity
Tray 1
Up to 20 glossy media sheets, depending on
(Manual Feed their thickness.
Tray)
Tray 2/3/4
Orientation Face down
Driver Glossy 1
Media Type Glossy 2
Weight Glossy 1 (100–150 g/m²)
Glossy 2 (128–210 g/m²)
Duplexing Not supported
Not supported
Glossy
Mode
ON/OFFSupported
ꢀ"
Glossy mode is Disabled at Grayscale (Color Mode), or
Duplex Print.
DO NOT use glossy media stock that is
„ Mixed with any other media in Tray 1 (as this will cause printer misfeed-
ing)
106
Media Types
Download from Www.Somanuals.com. All Manuals Search And Download.
What Is the Guaranteed Imageable (Printable) Area?
The printable area on all media sizes is
up to 4 mm (0.157") from the edges of
the media.
a
a
a
Each media size has a specific image-
able area, the maximum area on which
the printer can print clearly and without
distortion.
Printable
Area
This area is subject to both hardware
limits (the physical media size and the
margins required by the printer) and
software constraints (the amount of
a
a = 4 mm (0.157")
memory available for the full-page frame buffer). The guaranteed imageable
(printable) area for all media sizes is the page size minus 4 mm (0.157") from
all edges of the media.
ꢀ"
ꢀ"
When printing on Banner Paper, the bottom margin is 10 mm (0.393").
Banner Paper
Weight: 127-160g/m2
Width: 216mm
Length: 357-1200mm
Imageable Area—Envelopes
Envelopes have a nonguaranteed imageable area that varies with envelope
type.
ꢀ"
The envelope
print orienta-
tion is deter-
mined
by your appli-
cation.
Nonimageable area 4 mm (0.157")
Nonguaranteed area
Guaranteed
area
Page Margins
Margins are set through your application. Some applications allow you to set
custom page sizes and margins while others have only standard page sizes
and margins from which to choose. If you choose a standard format, you may
lose part of your image (due to imageable area constraints). If you can cus-
tom-size your page in your application, use those sizes given for the imagea-
ble area for optimum results.
107
Media Types
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading Media
How do I load media?
Take off the top and bottom sheets of a
ream of paper. Holding a stack of approx-
imately 100 sheets at a time, fan the
stack to prevent static buildup before
inserting it in a tray.
ꢀ"
Do not fan transparencies.
Note
Although this printer was designed for printing on a wide range of
media types, it is not intended to print exclusively on a single media
paper (such as envelopes, labels, thick stock, or transparencies) may
adversely affect print quality or reduce engine life.
When refilling media, first remove any media remaining in the tray. Stack it
with the new media, even the edges, then reload it.
Tray 1 (Manual Feed Tray)
For details on the types and sizes of media that can be printed from Tray 1,
refer to “Media Specifications” on page 98.
Loading Plain Paper
1
Open Tray 1.
108
Loading Media
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
4
Slide the media guides to pro-
vide more space between them.
Press down on the center of the
paper-lifting plate until the left
and right locking tabs (white)
lock into place.
Load the paper face down in the
tray.
109
Loading Media
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ"
Do not load paper above
the line. Up to 100 sheets
(80 g/m2 [22 lb]) of plain
paper can be loaded into
the tray at one time.
5
6
Slide the media guides against
the edges of the paper.
Select PAPER MENU/PAPER SOURCE/TRAY 1/PAPER SIZEand
PAPER TYPEin the configuration menu, and then select the setting for
the size and type of paper that are loaded. See also “PAPER MENU” on
page 39.
ꢀ"
When printing from Tray 1 with the corresponding Paper Source set-
ting in the printer driver Tray1 (Manual Feed), it is not necessary to
change the configuration menu setting.
Other Media
When loading media other than plain paper, set the media mode (Envelope,
Label, Thick 1, Thick 2, Glossy 1, Glossy 2, or Transparency) in the driver for
optimum print quality.
110
Loading Media
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Turn the two dials on the fuser
unit to the setting for envelopes.
Plain paper
Envelope
4
Close the door at the side of the
right side cover.
112
Loading Media
Download from Www.Somanuals.com. All Manuals Search And Download.
5
6
Close the right side cover.
Open Tray 1.
7
Slide the media guides to pro-
vide more space between them.
113
Loading Media
Download from Www.Somanuals.com. All Manuals Search And Download.
8
9
Press down on the center of the
paper-lifting plate until the left
and right locking tabs (white)
lock into place.
Load the envelopes flap side up
in the tray.
ꢀ"
Before loading enve-
lopes, press them down
to make sure that all air is
removed, and make sure
that the folds of the flaps
are firmly pressed; other-
wise the envelopes may
become wrinkled or a
media misfeed may
occur.
ꢀ"
ꢀ"
Up to 10 envelopes can be loaded into the tray at one time.
For envelopes with the
flap along the long edge,
load the envelopes with
the flap toward the right
of Tray 1.
114
Loading Media
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Slide the media guides against
the edges of the envelopes.
ꢀ"
Before printing on plain
paper, be sure to return
the dials on the fuser unit
paper.
11 Select PAPER MENU/PAPER SOURCE/TRAY 1/PAPER SIZEand
PAPER TYPEin the configuration menu, and then select the setting for
the size and type of paper that are loaded. See also “PAPER MENU” on
page 39.
ꢀ"
When printing from Tray 1 with the corresponding Paper Source set-
ting in the printer driver Tray1 (Manual Feed), it is not necessary to
change the configuration menu setting.
Loading Label Sheets/Postcards/Thick Stock/Glossy
Media and Transparencies
1
Open Tray 1.
115
Loading Media
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
4
Slide the media guides to pro-
vide more space between them.
Press down on the center of the
paper-lifting plate until the left
and right locking tabs (white)
lock into place.
Load the media face down in the
tray.
ꢀ"
Up to 20 sheets can be
loaded into the tray at
one time.
116
Loading Media
Download from Www.Somanuals.com. All Manuals Search And Download.
5
6
Slide the media guides against
the edges of the media.
Select PAPER MENU/PAPER SOURCE/TRAY 1/PAPER SIZEand
PAPER TYPEin the configuration menu, and then select the setting for
the size and type of paper that are loaded. See also “PAPER MENU” on
page 39.
ꢀ"
When printing from Tray 1 with the corresponding Paper Source set-
ting in the printer driver Tray1 (Manual Feed), it is not necessary to
change the configuration menu setting.
117
Loading Media
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading Banner Paper
Paper up to 1200 mm long can be loaded into the bypass tray and printed
one at a time.
1
Open Tray 1.
2
Slide the media guides to pro-
vide more space between them.
3
Press down on the center of the
paper-lifting plate until the left
and right locking tabs (white)
lock into place.
118
Loading Media
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
6
With the side of the banner
paper to be printed on facing
down, insert the end of the paper
as much as possible into the
feed slot.
ꢀ"
ꢀ"
One sheet of banner
paper can be loaded into
the tray at one time.
In order to avoid toner
smudges, do not load
curled paper.
Slide the media guides against
the edges of the banner paper.
Raise the bypass tray, and
secure the banner paper.
Return the bypass tray to its
original position.
119
Loading Media
Download from Www.Somanuals.com. All Manuals Search And Download.
7
8
Secure the banner paper with
the left and right media guides.
ꢀ"
When printing multiple
copies on banner paper,
repeat the procedure
starting from step 2.
Select Tray 1(Manual Feed) from the Paper Source list and specify a cus-
tom size in the Original Size list of the printer driver, and then print.
120
Loading Media
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Load the paper face up in the
tray.
ꢀ"
Do not load above the ꢀ
mark. Up to 500 sheets
(80 g/m2 [22 lb]) of plain
paper can be loaded into
the tray at one time.
4
5
Close Tray 2.
Select PAPER MENU/PAPER SOURCE/TRAY 2/PAPER SIZEand
PAPER TYPEin the configuration menu, and then select the setting for
the size and type of paper that are loaded. See also “PAPER MENU” on
page 39.
122
Loading Media
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Load the paper face up in the
tray.
ꢀ"
Do not load above the ꢀ
mark. Up to 500 sheets
(80 g/m2 [22 lb]) of plain
paper can be loaded into
the tray at one time.
5
Slide the media guides against
the edges of the paper.
124
Loading Media
Download from Www.Somanuals.com. All Manuals Search And Download.
6
7
Close Tray 3 (Tray 4).
Select PAPER MENU/PAPER SOURCE/TRAY 3(or TRAY 4)/
PAPER TYPEin the configuration menu, and then select the setting for
the type of paper that is loaded. See also “PAPER MENU” on page 39.
125
Loading Media
Download from Www.Somanuals.com. All Manuals Search And Download.
Duplexing
refers to how effectively paper blocks out what is written on the opposite side
of the page. If the paper has low opacity (high translucency), then the printed
data from one side of the page will show through to the other side. Check
your application for margin information. For best results, print a small quantity
to make sure the opacity is acceptable.
Duplex (Double-Sided) printing can be done manually or can be done auto-
matically with the duplex option installed and selected.
Note
Only plain paper, 60–90 g/m2 (16–24 lb bond) can be autoduplexed. See
“Media Specifications” on page 98.
Duplexing envelopes, labels, postcards, thick stock, glossy media or
transparencies is not supported.
How do I autoduplex?
You should verify that the duplex option is physically installed on the printer to
successfully duplex (Double-Sided) the job.
Check your application to determine how to set your margins for duplex
(Double-Sided) printing.
The following Binding Position settings are available.
If “Short Edge” is selected, the pages will be laid out to flip
at the top.
1
1
3
If “Long Edge” is selected, the pages will be laid out to flip
at the side.
1
1
3
126
Duplexing
Download from Www.Somanuals.com. All Manuals Search And Download.
In addition, if “N-up” has been set to “Booklet”, autoduplex printing is per-
formed.
The following Order settings are available when “Booklet” is selected.
If “Left Binding” is selected, the pages can be folded as a
left-bound booklet.
1
1
3
If “Right Binding” is selected, the pages can be folded as a
right-bound booklet.
1
3
1
3
1
2
Load plain paper into the tray.
From the printer driver, specify duplex (Double-Sided) printing (Layout tab
in Windows).
3
Click OK.
ꢀ"
With autoduplexing, the back side is printed first, and then the front
side is printed.
Output Tray
All printed media is output to the face-down output tray on top of the printer.
This tray has a capacity of approximately 250 sheets (A4/Letter) of 80 g/m2
(22 lb) paper.
ꢀ"
ꢀ"
If the media is stacked too high in the output tray, your printer may
experience media misfeeds, excessive media curl, or static buildup.
Remove transparencies as soon as possible from the output tray to
avoid static buildup.
127
Output Tray
Download from Www.Somanuals.com. All Manuals Search And Download.
Finishing
When the optional staple finisher is installed, job separation, offset and staple
printing can be performed. For the installation procedure, refer to “Staple Fin-
isher” on page 244. Settings can be specified for job separation, offset and
staple printing by selecting JOB SEPARATIONor FINISHINGin PAPER
MENU.
ꢀ"
Use the following paper with job separation, offset and staple printing.
Media Types
Media Size
Plain paper, Recycled paper and Letterhead
(changes according to the paper thickness)
Width: 182 to 216 mm
Length: 257 to 355.6 mm
ꢀ"
Paper is fed to the main output tray with job separation, offset and sta-
ple printing.
Job Separation Printing
When paper is fed to the main output tray, the pages are fed out shifted as
shown below.
ꢀ"
ꢀ"
When paper is fed to the sub output tray, the pages are fed out
stacked on top of each other without begin shifted.
If staple printing is selected, the pages are stapled together before
being fed out.
1
2
3
4
1
2
128
Finishing
Download from Www.Somanuals.com. All Manuals Search And Download.
Offset Printing
If offset printing is selected, the paper is fed out shifted as shown below.
ꢀ"
When PAPER MENU/COLLATEis set to ON, the pages are fed out
in sets as shown below.
- When COLLATEis set to ON
- When COLLATEis set to OFF
1
2
3
1
1
1
1
2
3
2
2
2
1
2
3
3
3
3
Staple printing
Pages are stapled and fed out by job or by copy set as shown below.
Page in the portrait orientation are stapled in the upper-left corner.
ꢀ"
ꢀ"
The copies can be stapled when they contain 2 to 30 pages (3 to 60
pages when double-sided).
If staple printing is selected when COLLATEis set to ON, the pages
are stapled before being fed out. If staple printing is selected when
COLLATEis set to OFF, the pages are not stapled before being fed
out (except when only one copy is being printed).
ꢀ"
When copies are stapled, they are not fed out shifted as with offset
printing or job separation printing. Instead, they are fed out at the
same position.
1
129
Finishing
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Storage
How do I store media?
„ Keep media on a flat, level surface in its original wrapper until it is time to
load it.
Media that has been stored for a long time out of its packaging may dry up
too much and cause misfeeding.
„ If media has been removed from its wrapper, place it in its original pack-
aging and store in a cool, dark place on a level surface.
„ Avoid moisture, excessive humidity, direct sunlight, excessive heat
(above
35°C [95°F]), and dust.
„ Avoid leaning media against other objects or placing it in an upright posi-
tion.
Before using stored media, do a trial print to check print quality.
130
Media Storage
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
Failure to follow instructions as outlined in this manual could result in
voiding your warranty.
Note
If an error message (TONER EMPTY, TRANS.BELT END OF LIFE, etc.)
appears, print out the configuration page, and then check the status of the
other consumables. For details on the error messages, refer to “Error
Messages (Warning:)” on page 215. For details on printing the
configuration page, refer to “Printing a Configuration Page” on page 176.
About Toner Cartridges
Your printer uses four toner cartridges: black, yellow, magenta, and cyan.
Handle the toner cartridges carefully to avoid spilling toner inside the printer
or on yourself.
ꢀ"
ꢀ"
Install only new toner cartridges in your printer. If a used toner car-
tridge is installed, the indicator message will not clear and the supplies
status in the Status Monitor will not be updated.
The toner is nontoxic. If you get toner on your skin, wash it off with
cool water and a mild soap. If you get toner on your clothes, lightly
dust them off as best as you can. If some toner remains on your
clothes, use cool, not hot water, to rinse the toner off.
CAUTION
If you get toner in your eyes, wash it out immediately with cool water
and consult a doctor.
132
Replacing Consumables
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
Do not use refilled toner cartridges or unapproved toner cartridges. Any
damage to the printer or quality problems caused by a refilled toner
cartridge or an unapproved toner cartridge will void your warranty. No
technical support is provided to recover from these problems.
When replacing a toner cartridge, refer to the following table. For optimum
print quality and performance, use only approved KONICA MINOLTA toner
cartridges for your specific printer type, as listed in the table below. You can
find your printer type and the toner cartridge part numbers on the consum-
ables reorder label inside the front cover your printer.
Printer
Type
Printer Parts
Number
Toner Cartridge Type
Toner Cartridge
Parts Number
High-Capacity Toner Cartridge -Black (K)
High-Capacity Toner Cartridge -Yellow (Y)
High-Capacity Toner Cartridge -Magenta (M)
High-Capacity Toner Cartridge -Cyan (C)
A06V 154
A06V 254
A06V 354
A06V 454
EU
A011 024
ꢀ"
For optimum print quality and performance, use only the corre-
sponded TYPE genuine KONICA MINOLTA toner cartridges.
Keep toner cartridges:
„ In their packaging until you’re ready to install them.
„ In a cool, dry location away from sunlight (due to heat).
The maximum storage temperature is 35°C (95°F) and the maximum
storage humidity is 85% (noncondensing). If the toner cartridge is moved
from a cold place to a warm, humid place, condensation may occur,
degrading print quality. Allow the toner to adapt to the environment for
about one hour before use.
133
Replacing Consumables
Download from Www.Somanuals.com. All Manuals Search And Download.
„ Level during handling and storage.
Do not hold, stand or store cartridges on their ends or turn them upside
down; the toner inside the cartridges may become caked or unequally
distributed.
Y
„ Away from salty air and corrosive gases such as aerosols.
134
Replacing Consumables
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing a Toner Cartridge
Note
Be careful not to spill toner while replacing a toner cartridge. If toner
spills, immediately wipe it off with a soft, dry cloth.
If TONER LOWon the SYS DEFAULT MENU/ENABLE WARNINGis set
to ON, the message TONER LOW X(where “X”. represents the color of the
toner) appears when toner cartridge becomes empty. Follow the steps below
to replace the toner cartridge.
ꢀ"
If TONER LOWon the SYS DEFAULT MENU/ENABLE WARNING
is set to OFF, you are advised to replace the indicated toner cartridge
when the message TONER EMPTY Xappear.
1
Open the printer’s front cover.
2
Pull the front lever to the right.
Y
135
Replacing Consumables
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
Lower the lever to release the
lock.
Y
Grab the handle of the toner car-
tridge to be replaced, and then
pull out the cartridge.
Y
Y
Note
Dispose of the used toner cartridge according to your local regulations.
Do not burn the toner cartridge.
For details, refer to “About Toner Cartridges” on page 132.
5
6
Check the color of the new toner cartridge to be installed.
Remove the toner cartridge from the bag.
136
Replacing Consumables
Download from Www.Somanuals.com. All Manuals Search And Download.
7
8
Shake the cartridge to distribute
the toner.
3 ×
Y
Make sure that the toner car-
tridge is the same color as the
printer compartment, and then
insert the toner cartridge into the
printer.
Y
Y
9
Make sure that the toner car-
tridge is securely installed, and
then peel off the protective film.
Y
Y
137
Replacing Consumables
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Raise the front lever to its origi-
nal position.
Y
11
12
Pull the lever to the left to lock it
in place.
Y
ꢀ"
The front lever should be
securely returned to its
original position; other-
wise, the front cover of
the printer cannot be
closed.
Close the front cover.
138
Replacing Consumables
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing a Print Unit
When replacing a print unit, refer to the following table. For optimum print
quality and performance, use only approved KONICA MINOLTA print units for
your specific printer type, as listed in the table below. You can find your printer
type and the print unit part numbers on the consumables reorder label inside
the front cover your printer.
Printer
Type
Printer Parts
Number
Print Unit Type
Print Unit Parts
Number
Print Unit - Black (K)
Print Unit - Yellow (Y)
Print Unit - Magenta (M)
Print Unit - Cyan (C)
A031 00J
A031 05J
A031 0AJ
A031 0GJ
EU
A011 024
ꢀ"
“I-UNIT” displayed in the control panel refers to the print unit.
Note
Do not touch the OPC drum
surface. This could lower image
quality.
P
U
S
H
Y
If I-UNIT LOWon the SYS DEFAULT MENU/ENABLE WARNINGis set
to ON, the message I-UNIT LOW X(where “X”. represents the color of the
toner) appears when a print unit becomes empty. Follow the steps below to
replace the print unit.
ꢀ"
You are advised to replace the indicated print unit when the message
I-UNIT LIFE Xappears.
1
Check the message window to see which color print unit needs replacing.
139
Replacing Consumables
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
Open the printer’s front cover.
Pull the front lever to the right.
K
4
Lower the lever to release the
lock.
K
140
Replacing Consumables
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Press down the area marked
“Push” on the print unit to be
replaced, and then slide the unit
all the way out of the printer.
Note
Dispose of the used print unit according to your local regulations.
Do not burn the print unit.
6
7
Check the color of the new print unit to be installed.
ꢀ"
In order to prevent toner from spilling, leave the print unit in the
bag until step 5 is being performed.
Remove the print unit from the
bag.
PUSH
K
141
Replacing Consumables
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Hold the print unit with both
hands, and then shake it twice
as shown in the illustration.
P
USH
Y
ꢀ"
Do not grab the bottom of
the bag; otherwise, the
print unit may be dam-
aged, resulting in
decreased print quality.
P
U
S
9
Remove all packing tape from
the print unit.
P
U
S
H
K
10
Remove the protective cover
from the print unit. The protec-
tive cover slides after having
turned.
P
U
S
H
K
142
Replacing Consumables
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Make sure that the new print unit
to be installed is the same color
as the printer compartment, and
then install the print unit in the
printer.
12
13
Raise the front lever to its origi-
nal position.
K
Pull the lever to the left to lock it
in place.
ꢀ"
The front lever should be
securely returned to its
original position; other-
wise, the front cover of
the printer cannot be
closed.
K
143
Replacing Consumables
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Close the front cover.
144
Replacing Consumables
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the Waste Toner Bottle
When the waste toner bottle becomes full, the message WASTE TONER
FULL/REPLACE BOTTLE appears in the message window. The printer
stops and will not start again until the waste toner bottle is replaced.
1
Open the printer’s front cover.
2
Turn the dial on the waste toner
bottle counterclockwise until it is
in the unlock position.
Lock
Unlock
145
Replacing Consumables
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
Open the left and right handles
of the waste toner bottle.
Grab the left and right handles of
the waste toner bottle, and then
slowly pull out the bottle.
ꢀ"
Be careful since some
waste toner may spill if
the lock is closed when
the waste toner bottle is
removed.
5
Remove the new waste toner bottle from its packaging. Insert the used
waste toner bottle into the plastic bag included in the box, and then box it
up.
Note
Dispose of the used waste toner bottle according to your local
regulations. Do not burn the waste toner bottle.
ꢀ"
Before installing the waste toner bottle, be sure that the dial on the
waste toner bottle is unlocked.
146
Replacing Consumables
Download from Www.Somanuals.com. All Manuals Search And Download.
6
7
Slide the waste toner bottle all
the way into the printer.
Turn the dial clockwise until the
waste toner bottle is in the
locked position.
Unlock
Lock
147
Replacing Consumables
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Close the front cover.
ꢀ"
If the waste toner bottle is
not fully inserted or if the dial is not locked, the front cover cannot
be closed.
Replacing the Transfer Roller
When the time to replace the transfer roller is reached, the message
TRANS.ROLLER/END OF LIFE appears. Printing can continue even
after this message appears; however, since the print quality is reduced, the
transfer roller should be replaced immediately.
When replacing the transfer roller, also replace the ozone filter. A new ozone
filter is included with the new transfer roller.
Replacing the Transfer Roller
1
Pull the lever, and then open the
right side cover.
ꢀ"
Before opening the right
side cover, fold up Tray 1.
148
Replacing Consumables
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
While pushing the levers to the
inside, move the roller presser
toward you.
While continuing to press the
levers, remove the transfer
roller.
4
5
Prepare a new transfer roller.
While pressing the levers, insert
the shaft of the transfer roller
into the bearings.
149
Replacing Consumables
Download from Www.Somanuals.com. All Manuals Search And Download.
6
7
Move the levers away from you
until it snaps into place.
Close the right side cover.
8
9
Reset the counter in the MAINTENANCE MENU/SUPPLIES/
REPLACE/TRANS. ROLLER menu.
Replace the ozone filter, using the following procedure.
150
Replacing Consumables
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the Transfer Belt Unit
When the time to replace the transfer belt unit is reached, the message
TRANS. BELT/END OF LIFE appears. Printing can continue even after
this message appears; however, since the print quality is reduced, the trans-
fer belt unit should be replaced immediately.
1
Open the printer’s front cover.
2
Remove the print unit and waste
toner bottle.
ꢀ"
For details on removing
the print unit or waste
toner bottle, refer to
“Replacing a Print Unit”
on page 139 or “Replac-
ing the Waste Toner Bot-
tle” on page 145.
ꢀ"
Cover the removed print
unit to protect it from
direct sunlight.
152
Replacing Consumables
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
5
Using a coin, remove the four
screws on the left side.
ꢀ"
Be careful not to lose the
screws.
Remove the left-side cover.
Pull the lever, and then open the
right side cover.
ꢀ"
Before opening the right
side cover, fold up Tray 1.
153
Replacing Consumables
Download from Www.Somanuals.com. All Manuals Search And Download.
6
7
8
Use a coin to loosen the screws
securing the transfer belt unit.
On the left side, pull to the right
the blue shutter lever for the
transfer belt unit.
ꢀ"
Do not remove the blue
lever.
From the side where the left side
cover was removed, hold the
arm, and then carefully pull out
the transfer belt unit.
154
Replacing Consumables
Download from Www.Somanuals.com. All Manuals Search And Download.
9
10
11
Remove all packing tape from
the transfer belt unit.
Remove the protective cover
from the transfer belt unit.
Prepare a new transfer belt unit.
ꢀ"
ꢀ"
Be careful not to touch
the surface of the belt.
Do not remove the blue
lever.
12
Insert the new transfer belt unit
along the rails.
155
Replacing Consumables
Download from Www.Somanuals.com. All Manuals Search And Download.
13
14
15
On the left side, pull to the left
the blue shutter lever for the
transfer belt unit.
From the right side cover side,
tighten the screws to secure the
transfer belt unit and then close
the right side cover.
Close the right side cover.
156
Replacing Consumables
Download from Www.Somanuals.com. All Manuals Search And Download.
16
17
18
Attach the left-side cover.
Tighten the four screws on the
left side.
Install the print unit and waste
toner bottle.
ꢀ"
For details on installing
the print unit or waste
toner bottle, refer to
“Replacing a Print Unit”
on page 139 or “Replac-
ing the Waste Toner Bot-
tle” on page 145.
157
Replacing Consumables
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Close the front cover.
20 Reset the counter in the MAINTENANCE MENU/SUPPLIES/
REPLACE/TRANS. BELTmenu.
Replacing the Backup Battery
If the backup battery is dead, the printer’s date and time cannot be retained.
Follow the procedure described below to replace the backup battery.
Note
It’s very important to protect the printer controller board and any
associated circuit boards from electrostatic damage. Before performing
this procedure, review the antistatic caution on page 226. In addition,
always handle circuit boards by the edges only.
1
Turn off the printer and discon-
nect the power cord and inter-
face cables.
158
Replacing Consumables
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
4
Using a screwdriver, remove the
screw. Then, slide the rear cover
to the right and remove it.
Using a screwdriver, loosen the
seven screws. (Do not remove
them from the printer.)
Slide the panel slightly to the
right and lift it off the printer.
159
Replacing Consumables
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Remove the hook, and then
remove the backup battery.
6
7
Insert a new backup battery.
ꢀ"
When inserting the new
backup battery, be sure
that the + side faces
toward the left.
Reinstall the panel and tighten
the seven screws.
8
9
10
Attach the rear cover.
Reconnect all interface cables.
Reconnect the power cord, and
turn on the printer.
160
Replacing Consumables
Download from Www.Somanuals.com. All Manuals Search And Download.
11 Use DATEon the SYS DEFAULT MENU/CLOCKmenu to set the date,
and use TIMEon the SYS DEFAULT MENU/CLOCKmenu to set the
time.
Replacing the Staple
When there are no more staples, the message STAPLER EMPTYappears.
Replace the staple cartridge.
1
Open the stapler cover.
2
Pull out the stapling unit.
161
Replacing Consumables
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
Pull out the stapler.
Remove the empty cartridge,
and then insert the new one.
162
Replacing Consumables
Download from Www.Somanuals.com. All Manuals Search And Download.
5
6
7
Install the stapler.
Install the stapling unit.
Close the stapler cover.
163
Replacing Consumables
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintaining the Printer
CAUTION
Read all caution and warning labels carefully, making sure to follow any
instructions contained in them. These labels are located on the inside of
the printer’s covers and the interior of the printer body.
Handle the printer with care to preserve its life. Abuse handling may cause
damage and void your warranty. If dust and paper scraps remain on the
inside or outside of the printer, printer performance and print quality will suffer,
so the printer should be cleaned periodically. Keep the following guidelines in
mind.
WARNING!
Turn off the printer, unplug the power cord, and disconnect all interface
cables before cleaning. Do not spill water or detergent into the printer;
otherwise the printer will be damaged and an electric shock may occur.
CAUTION
The fuser unit is hot. When the right side cover is opened, the
fuser unit temperature drops gradually (one hour wait time).
„ Be careful when cleaning the inside of the printer or removing media mis-
feeds, as the fuser unit and other internal parts may be very hot.
„ Do not place anything on top of the printer.
„ Use a soft cloth to clean the printer.
„ Never spray cleaning solutions directly on the printer’s surface; the spray
could penetrate through the air vents of the printer and damage the inter-
nal circuits.
„ Avoid using abrasive or corrosive solutions or solutions that contain sol-
vents (such as alcohol and benzene) to clean the printer.
„ Always test any cleaning solution (such as mild detergent) on a small
inconspicuous area of your printer to check the solution’s performance.
„ Never use sharp or rough implements, such as wire or plastic cleaning
pads.
„ Always close the printer’s covers gently. Never subject the printer to vibra-
tion.
„ Do not cover the printer immediately after using it. Turn it off and wait until
it cools down.
166
Maintaining the Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
„ Do not leave the printer’s covers open for any length of time, especially in
well-lit places; light may damage the toner cartridges.
„ Do not open the printer during printing.
„ Do not tap media stacks on the printer.
„ Do not lubricate or disassemble the printer.
„ Do not tilt the printer.
„ Do not touch the electrical contacts, gears, or laser devices. Doing so
may damage the printer and cause the print quality to deteriorate.
„ Keep media in the output tray at a minimum level. If the media is stocked
too high, your printer may experience media misfeeds and excessive
media curl.
„ Make sure two people are avail-
able to lift the printer when mov-
ing it.
44 kg
97 lbs
Keep the printer level to avoid
toner spillage.
„ When lifting the printer, fold up
Tray 1, and then lift the printer as
shown in the illustration at the
right.
Even if an optional lower feeder
unit is installed, be sure to lift the
printer as shown below. Do not
grasp the grip of Tray 3, Tray 4
Front
or the right side cover; other-
wise, the lower feeder unit may
be damaged.
167
Maintaining the Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
„ If you get toner on your skin, wash it off with cool water and a mild soap.
CAUTION
If you get toner in your eyes, wash it out immediately with cool water
and consult a doctor.
„ Make sure any parts removed during cleaning are replaced before you
plug in the printer.
Cleaning the Printer
CAUTION
Be sure to turn off the printer and unplug the power cord before
cleaning.
Exterior
Control Panel
Ventilation Grill
Printer Exterior
168
Cleaning the Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Rollers
The accumulation of paper dust and other debris on the media rollers can
cause media-feeding problems.
Cleaning the Media Feed Rollers (Manual Feed Tray)
1
Open Tray 1.
2
Press down on the center of the
paper-lifting plate until the left
and right locking tabs (white)
lock into place.
169
Cleaning the Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
Clean the media feed rollers by
wiping them with a soft, dry
cloth.
Close the tray.
170
Cleaning the Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the Media Transfer Rollers for Tray 3 and 4
1
Open the right side cover of
Tray 3 (Tray 4).
ꢀ"
Before opening the right
side cover of Tray 3
(Tray 4), fold up Tray 1.
2
3
Clean the media transfer rollers
by wiping them with a soft, dry
cloth.
Close the right side cover of
Tray 3 (Tray 4).
173
Cleaning the Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the Laser Lens
This printer is constructed with four laser lenses. Clean all lenses as
described below. The laser lens cleaning tool should be attached to the inside
of the front cover.
1
Open the printer’s front cover
and remove the cleaning tool
from the machine’s front cover.
2
3
Insert the laser lens cleaning
tool into the laser lens cleaning
opening, pull it out, and then
repeat this back and forth move-
ment 2 or 3 times.
Clean between each of the laser
lenses in the same way.
ꢀ"
The laser lens cleaning tool
is included with the printer.
Safely store the laser lens
cleaning tool so that it will not
be lost.
4
5
Return the laser lens cleaning tool to its holder on the inside of the front
cover.
Close the front cover.
174
Cleaning the Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
This chapter provides information to aid you in resolving printer problems you
may encounter, or at least guide you to the proper sources for help.
Printing the configuration page
Preventing media misfeeds
Page 176
Page 177
Page 178
Page 179
Page 199
Page 202
Page 208
Page 214
Understanding the media path
Clearing media misfeeds
Solving problems with media misfeeds
Solving other problems
Solving problems with printing quality
Status, error, and service messages
Printing a Configuration Page
Print a configuration page to verify the printer is printing correctly, or to check
the printer configuration.
Press Key
(once)
Until Display Reads
READY
PRINT MENU
If the hard disk drive is installed, the PROOF/PRINT MENU
appears at the top of the menu. Press the
key to select
the PRINT MENU.
CONFIGRATION PG
PRINT
The configuration page prints and the printer goes back
to READY.
176
Introduction
Download from Www.Somanuals.com. All Manuals Search And Download.
Preventing Media Misfeeds
Make sure that...
Media matches the printer specifications.
Media is flat, especially on the leading edge.
The printer is on a hard, flat, level surface.
You store media in a dry location away from moisture and humidity.
You remove transparencies from the output tray immediately after printing to
avoid static buildup.
You always adjust the media guides in the tray after inserting the media (a
guide that is not properly adjusted can cause poor print quality, media mis-
feeds, and printer damage).
You load the media printing-side up in the tray (many manufacturers place an
arrow on the end of the wrapper to indicate the printing side).
Avoid...
Media that is folded, wrinkled, or excessively curled.
Double feeding (remove the media and fan the sheets—they may be sticking
together).
Fanning transparencies since this causes static.
Loading more than one type/size/weight of media in a tray at the same time.
Overfilling the trays.
Allowing the output tray to overfill (the output tray has a 250-sheet capacity—
misfeeding may occur if you allow more than 250 sheets of media to accumu-
late at one time).
Allowing the output tray to fill with more than a few transparencies.
177
Preventing Media Misfeeds
Download from Www.Somanuals.com. All Manuals Search And Download.
Understanding the Media Path
Understanding the printer’s media path will help you locate media misfeeds
14 15
1
2
13
12
3
4
11
10
9
5
8
7
6
1
2
3
4
5
6
7
8
Toner cartridge
Relay unit
9
Laser
10 Print unit
Fuser unit
11 Transfer belt unit
12 Main output tray
13 Sub output tray
Duplex option
Tray 1 (Manual feed tray)
Tray 4 (optional)
Tray 3 (optional)
Tray 2
14 Staple Finisher (optional)
15 Staple
178
Understanding the Media Path
Download from Www.Somanuals.com. All Manuals Search And Download.
Clearing Media Misfeeds
To avoid damage, always remove misfed media gently, without tearing it. Any
piece of media left in the printer, whether large or small, can obstruct the
media path and cause further misfeeds. Do not reload media that has misfed.
Note
The image is not fixed on the media before the fusing process. If you
touch the printed surface, the toner may stick to your hands, so be
careful not to touch the printed face when removing the misfed media.
Make sure not to spill any toner inside the printer.
CAUTION
Unfused toner can dirty your hands, clothes, or anything else it gets on.
If you accidentally get toner on your clothes, lightly dust them off as
best as you can. If some toner remains on your clothes, use cool, not
hot water, to rinse the toner off. If toner gets on your skin, wash it off
with cool water and a mild soap.
CAUTION
If you get toner in your eyes, wash it out immediately with cool water
and consult a doctor.
If, after clearing the media misfeed, the misfeed message in the control panel
window persists, open and close the printer’s covers. This should clear the
misfeed message.
179
Clearing Media Misfeeds
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Misfeed Messages and Clearing Procedures
Media Misfeed Message
Page Reference
Page 181
PAPER JAM
TRAY 2
Page 185
Page 185
Page 187
Page 187
Page 188
Page 191
Page 191
Page 185, Page 191
Page 193
Page 194
Page 195
Page 196
Page 197
PAPER JAM
TRAY 3
PAPER JAM
TRAY 4
PAPER JAM
DUPLEX 1
PAPER JAM
DUPLEX 2
PAPER JAM
FUSER/EXIT
PAPER JAM
TRAY 1
PAPER JAM
SECOND TRANS
PAPER JAM
VERTICAL TRANS
PAPER JAM
UPPER TRANS
PAPER JAM
FINISHER
PAPER JAM
SUB EXIT
PAPER JAM
MAIN EXIT
PAPER JAM
STAPLER
ꢀ"
If the message PAPER JAM/VERTICAL TRANSappears, check
for media misfeeds in the transfer roller section of the right side covers
for Tray 3 and/or Tray 4.
180
Clearing Media Misfeeds
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
The area around the fuser unit is
extremely hot.
Touching anything other than the
indicated levers and dials may
result in burns. If you get burned,
immediately cool the skin under
cold water, and then seek
professional medical attention.
Note
Decreased print quality may
result if the surface of the image
transfer belt or the transfer roller
is touched.
Be careful not to touch the
surface of the image transfer belt
or transfer roller.
182
Clearing Media Misfeeds
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Close the right side cover.
4
5
Pull out Tray 2, and then remove
all media from the tray.
Fan the media you removed and
then align it well.
183
Clearing Media Misfeeds
Download from Www.Somanuals.com. All Manuals Search And Download.
6
7
Load the media face up in Tray 2.
ꢀ"
ꢀ"
Make sure that the media is flat.
Do not load paper above the ꢀ mark.
Close Tray 2.
184
Clearing Media Misfeeds
Download from Www.Somanuals.com. All Manuals Search And Download.
Clearing a Media Misfeed in Tray 3/4
1
Open the right side cover of
Tray 3 (Tray 4).
ꢀ"
Before opening the right
side cover of Tray 3
(Tray 4), fold up Tray 1.
2
3
Carefully pull out the misfed
media.
Close the right side cover of
Tray 3 (Tray 4).
185
Clearing Media Misfeeds
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
Pull out Tray 3 (Tray 4), and
then remove all paper from the
tray.
Fan the paper you removed and
then align it well.
6
7
Load the paper face up in Tray 3 (Tray 4).
ꢀ"
ꢀ"
ꢀ"
Make sure that the paper is flat.
Do not load paper above the ꢀ mark.
Slide the media guides against the edges of the paper.
Close Tray 3 (Tray 4).
186
Clearing Media Misfeeds
Download from Www.Somanuals.com. All Manuals Search And Download.
Clearing a Media Misfeed from the Fuser Unit
1
Pull the lever, and then open the
right side cover.
ꢀ"
Before opening the right
side cover, fold up Tray
1.
2
3
Push up the levers of the fuser
unit cover, and then open the
cover.
Carefully pull out the misfed
media.
188
Clearing Media Misfeeds
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
The area around the fuser unit is
extremely hot.
Touching anything other than the
indicated levers and dials may
result in burns. If you get burned,
immediately cool the skin under
cold water, and then seek
professional medical attention.
Note
Decreased print quality may
result if the surface of the image
transfer belt or the transfer roller
is touched.
Be careful not to touch the
surface of the image transfer belt
or transfer roller.
189
Clearing Media Misfeeds
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
Push down the levers.
Close the right side cover.
190
Clearing Media Misfeeds
Download from Www.Somanuals.com. All Manuals Search And Download.
Clearing a Media Misfeed from Tray 1 (Manual Feed Tray)
and Transfer Roller
1
Pull the lever, and then open the
right side cover.
ꢀ"
Before opening the right
side cover, fold up Tray
1.
2
Carefully pull out the misfed
media.
191
Clearing Media Misfeeds
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
The area around the fuser unit is
extremely hot.
Touching anything other than the
indicated levers and dials may
result in burns. If you get burned,
immediately cool the skin under
cold water, and then seek
professional medical attention.
Note
Decreased print quality may
result if the surface of the image
transfer belt or the transfer roller
is touched.
Be careful not to touch the
surface of the image transfer belt
or transfer roller.
192
Clearing Media Misfeeds
Download from Www.Somanuals.com. All Manuals Search And Download.
Staple Finisher (Case 1)
If the media misfeed occurred between the relay unit and the top of the staple
finisher, follow the procedure described below to remove the misfed media.
1
Open the finisher cover.
2
Carefully pull out the misfed
media.
194
Clearing Media Misfeeds
Download from Www.Somanuals.com. All Manuals Search And Download.
Staple Finisher (Case 2)
If the media can be seen from the sub output tray, follow the procedure
described below to remove the misfed media.
1
Open the finisher cover.
2
Carefully pull out the misfed
media.
195
Clearing Media Misfeeds
Download from Www.Somanuals.com. All Manuals Search And Download.
Staple Finisher (Case 3)
If the media misfeed occurred in the center section of the staple finisher, fol-
low the procedure described below to remove the misfed media.
1
2
3
Open the finisher cover.
Clockwise turn the knob on the
inside until the media is fed into
the main output tray.
When the media is fed into the
main output tray, lift up the sub
output tray, and then slowly pull
out the media.
196
Clearing Media Misfeeds
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
Push up the guide for the staple
cartridge, and then remove any
jammed staples.
Return the guide to its original
position, and then install the sta-
pler.
6
7
Install the stapling unit.
Close the stapler cover.
198
Clearing Media Misfeeds
Download from Www.Somanuals.com. All Manuals Search And Download.
Solving Problems with Media Misfeeds
ꢀ"
Frequent misfeeds in any area indicate that area should be checked,
repaired, or cleaned. Repeated misfeeds may also happen if you’re
using unsupported print media.
Symptom
Cause
Solution
Several
sheets go
The front edges of
the media are not
Remove the media and even up the
front edges, then reload it.
through the even.
printer
The media is moist
Remove the moist media and replace it
with new, dry media.
together.
from humidity.
Too much static elec- Do not fan transparencies.
tricity is present.
Media mis- Right side cover
Open and close the right side cover of
feed mes-
sage stays
on.
needs to be opened the printer again.
and closed again to
reset the printer.
Some media remains Recheck the media path and make
misfed in the printer. sure that you have removed all of the
misfed media.
Duplex
Unsupported media Use KONICA MINOLTA-approved
option mis- (wrong size, thick-
media. See “Media Specifications” on
page 98.
feeds.
ness, type, etc.) is
being used.
Only plain paper, 60–90 g/m2 (16–24
lb) can be autoduplexed. See “Media
Specifications” on page 98.
Make sure that you have not mixed
media types in Tray 1.
Do not duplex (Double-Sided) enve-
lopes, labels, thick stock, glossy, or
transparencies.
Media is still being
misfed.
Recheck the media path inside the
duplex option and make sure that you
have removed all of the misfed media.
199
Solving Problems with Media Misfeeds
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Cause
Solution
Media is
The media is not cor- Remove the misfed media and reposi-
misfeeding. rectly positioned in
the tray.
tion the media properly in the tray.
The number of sheets Remove the excess media and reload
in the tray exceeds
the maximum
allowed.
the correct number of sheets in the
tray.
The media guides are Adjust the media guides in the tray to
not correctly adjusted match the size of the media.
to the media size.
Warped or wrinkled
Remove the media, smooth it out, and
media is loaded in the reload it. If it still misfeeds, do not use
tray.
that media.
The media is moist
from humidity.
Remove the moist media and replace it
with new, dry media.
Custom-sized media, Special media must be loaded in
envelopes, labels,
postcards, thick
stock, glossy, or
transparencies are
loaded in Tray 2, 3 or
4.
Tray 1 only.
The recommended
Load the transparencies or label
transparency or label sheets according to the manufacturer’s
sheet is facing the
instructions.
wrong way in Tray 1.
Envelopes are facing Load the envelopes in Tray 1 so the
the wrong way in
Tray 1.
flaps are facing up.
If the flaps are on the long edge, load
the envelopes with the flaps toward the
right of the printer.
200
Solving Problems with Media Misfeeds
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Cause
Solution
Media is
Transparencies have Remove the transparencies and load
tricity in the tray.
Do not fan transparencies before load-
ing them.
Unsupported media Use KONICA MINOLTA-approved
(wrong size, thick-
ness, type, etc.) is
being used.
media.
See “Media Specifications” on page
98.
The media roller is
dirty.
Clean the media supply roller.
For more details, refer to “Media Roll-
ers” on page 169.
201
Solving Problems with Media Misfeeds
Download from Www.Somanuals.com. All Manuals Search And Download.
Solving Other Problems
Symptom
Cause
Solution
Printer
The power cord is not Turn off the printer, confirm that the
power is not correctly plugged into power cord is correctly plugged into the
on.
the outlet.
Something is wrong Plug another electrical appliance into
with the outlet con- the outlet and see whether it operates
outlet, and then turn on the printer.
nected to the printer. properly.
The power switch is Turn the power switch off (O position),
not correctly turned
on (I position).
then turn it back to the on (I position).
The printer is con-
nected to an outlet
Use a power source with the specifica-
tions listed in appendix A, “Technical
with a voltage or fre- Specifications.”
quency that does not
match the printer
specifications.
Data was
sent to the
An error message is Handle according to the message dis-
displayed in the mes- played.
printer, but it sage window.
doesn’t print.
A job may be can-
Click the User Authentication/Account
celled if user authen- Track button in the printer driver, and
tication or account
track settings are
specified.
then type in the necessary information
before printing.
The control One of the cartridges Remove the toner cartridges and check
panel dis-
plays
may be defective.
them for damage. If one is damaged,
replace it.
TONER
You printed with
heavy toner cover-
age.
See the specifications in Appendix A.
LOWmuch
sooner than
expected.
202
Solving Other Problems
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Cause
Solution
You can’t
print the con-
figuration
page.
The tray is empty.
Check that at least Tray 1 is loaded
with media, in place, and secure.
The printer’s covers Make sure the covers are closed
aren’t closed
securely.
securely. Close all covers gently to
avoid jarring the printer. Make sure the
waste toner bottle and toner cartridges
are installed correctly.
There is a media
misfeed.
Clear the media misfeed.
Images can- The digital camera
Set the digital camera transfer mode to
not be
transfer mode is not PictBridge.
printed from set to PictBridge.
the digital
camera.
ꢀ"
Printer only
supports a
PictBridge
compliant
digital camera.
CAMERA DIRECT Change the setting for INTERFACE
for the printer is set to
MENU/CAMERA DIRECTto
DISABLE.
ENABLE.
A public user is not
specified for user
authentication.
Contact the printer administrator.
Printing from The file format (file
Only files with the format (extension)
a USB mem- extension) is not one for JPEG, TIFF or PDF can be printed.
ory device is that can be printed.
not possible.
MEMORY DIRECT Change the setting for INTERFACE
for the printer is set to
MENU/MEMORY DIRECTto
DISABLE.
ENABLE.
A public user is not
specified for user
authentication.
Contact the printer administrator.
203
Solving Other Problems
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Cause
Solution
Printing
The printer is set to a It takes more time to print on special
takes too
slow printing mode
media. When using regular paper,
make sure that the media type is set
properly in the driver.
much time. (for example, thick
stock or transpar-
ency).
The printer is set to
It takes time for printing to start in
Energy Saver mode. Energy Saver mode. If you do not want
to use this mode, disable it. (SYS
DEFAULT MENU/ENERGY SAVER
menu)
The job is very com- Wait. No action needed.
plex.
The printer memory is Add more memory.
insufficient.
A toner cartridge for a Install a correct KONICA MINOLTA
different region or an toner cartridge approved for your spe-
unapproved genuine cific printer.
toner cartridge is
installed (INCOR-
RECT TONER Xis
displayed in the mes-
sage window).
Blank pages One or more of the
Check the toner cartridges. The image
come out
toner cartridges are will not print if one or more cartridges
during print- defective or empty.
ing.
are empty.
The wrong media is Check that the media type set in the
being used.
driver matches the media loaded in the
printer.
204
Solving Other Problems
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Cause
Solution
Not all pages The printer has the
Check your cable.
print.
wrong kind of cable,
or the printer is not
configured for the
correct cable and
port.
The Cancel key was Make sure no one pressed the Cancel
pressed.
key while your job was printing.
The tray is empty.
Check that the trays are loaded with
media, in place, and secure.
A document is printed Print the overlay file using a bizhub
with an overlay file
which has been cre-
ated by a non-bizhub
C30P driver.
C30P driver.
Printer
resets or
The power cord is not Turn off the printer, confirm that the
correctly plugged into power cord is correctly plugged into the
turns off fre- the outlet.
quently.
outlet, and then turn on the printer.
A system error
Contact Technical Support with the
error information.
occurred.
205
Solving Other Problems
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Cause
Solution
You are
Media or settings are For autoduplexing, make sure that you
experienc-
ing duplex
(Double-
Sided) prob-
lems.
not correct.
have a duplex option installed.
Make sure that you are using correct
media.
„ See “Media Specifications” on page
98.
„ Do not duplex (Double-Sided) enve-
lopes, labels, postcards, thick stock,
glossy, or transparencies.
„ Make sure that you have not mixed
media types in Tray 1.
Make sure that your document has
more than one page.
Make sure the duplex option is installed
and declared in the Windows printer
driver (Properties/Configure tab).
In the Windows printer driver (Layout/
Double-Sided), choose “Dou-
ble-Sided.”
For N-up on duplexed pages, choose
Collate only in the Windows driver’s
Paper Tab. Do not set collation in the
application.
With N-up on Both the driver and
For N-up on multiple copies, choose
multiple cop- the application have Collate only in the Windows driver’s
ies, the out- been set for collation. Paper Tab. Do not set collation in the
put is
application.
incorrect.
You hear
unusual
noises.
The printer is not
level.
Place the printer on a flat, hard, level
surface.
The tray is not
installed correctly.
Remove the tray that you are printing
from and reinsert it completely into the
printer.
There is a foreign
object stuck inside
the printer.
Turn off the printer and remove the
object. If you cannot remove it, contact
Technical Support.
206
Solving Other Problems
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Cause
Solution
The
The PageScope Web The PageScope Web Connection
web-based Connection Adminis- Administrator password has a 6-char-
utility cannot trator’s password is acter minimum and a 16-character
be accessed. incorrect.
maximum. For details of the Page-
Scope Web Connection administrator
password, refer to the bizhub C30P
Reference Guide on the Utilities and
Documentation CD-ROM.
Media is
wrinkled.
The media is moist
from humidity or hav- with new, dry media.
Remove the moist media and replace it
ing water spilled on it.
The transfer roller or Check them for damage. If necessary,
fuser unit is defective. contact Technical Support with the
error information.
Unsupported media Use KONICA MINOLTA-approved
(wrong size, thick-
ness, type, etc.) is
being used.
media. See “Media Specifications” on
page 98.
The date and The backup battery
Replace the backup battery. For
time is not
correctly
maintained
on the
has reached the end details, see “Replacing the Backup Bat-
of its service life. tery” on page 158.
printer.
The pages
There are large curls Remove the paper from the paper tray,
that were fed in the paper.
turn it over, and then load it again.
out were not
uniformly
loaded and
the staples
are
incorrectly
positioned.
There are gaps
between the media
guides of the paper
tray and the sides of
Slide the media guides of the paper
tray against the sides of the paper so
that there are no gaps.
the paper.
207
Solving Other Problems
Download from Www.Somanuals.com. All Manuals Search And Download.
Solving Problems with Printing Quality
Symptom
Cause
Solution
Nothing is
printed, or
there are
One or more of the
print units may be
defective.
Remove the print units and check it for
damage. If it is damaged, replace it.
blank spots
on the
printed page.
The printer driver is Select the proper setting in the printer
not set correctly.
driver to switch from transparencies to
plain paper.
The media is moist
from humidity.
Adjust the humidity for media storage.
Remove the moist media and replace it
with new, dry media.
The media set in the Load the correct media in the printer.
printer driver mis-
matches the media
loaded in the printer.
The power source
does not match the
printer specifications.
Use a power source with the proper
specifications.
Several sheets are
Remove the media from the tray and
being fed at the same check it for static electricity. Fan plain
time.
paper or other media (but not transpar-
encies), and replace it in the tray.
Media is not set prop- Remove the media, tap it to straighten
erly in the tray(s).
it out, return it to the tray, and realign
the media guides.
Entire sheet One or more of the
is printed in print units may be
Remove the print units and check it for
damage. If it is damaged, replace it.
black or
color.
defective.
208
Solving Problems with Printing Quality
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Cause
Solution
Image is too Laser lens is dirty.
Clean the laser lens.
light; there is
low image
density.
The media is moist
from humidity.
Remove the moist media and replace it
with new, dry media.
There is not much
Replace the toner cartridge.
toner left in the car-
tridge.
One or more of the
print units may be
defective.
Remove the print units and check them
for damage. If one is damaged,
replace it.
The media type is set When printing envelopes, labels, post-
incorrectly.
cards, thick stock, glossy, or transpar-
encies, specify the appropriate media
type in the printer driver.
Image is too One or more of the
Remove the print units and check them
for damage. If one is damaged,
replace it.
dark.
print units may be
defective.
Image is
blurred;
background defective.
is lightly
One or more of the
print units may be
Remove the print units and check them
for damage. If one is damaged,
replace it.
stained;
there is
insufficient
gloss of the
printed
image.
209
Solving Problems with Printing Quality
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Cause
Solution
The print or One or more of the
Remove the toner cartridges and
color density toner cartridges may check them for damage. If one is dam-
is uneven.
be defective or low.
aged, replace it.
The printer is not
level.
Place the printer on a flat, hard, level
surface.
Irregular
print or mot- from humidity.
tled image
The media is moist
Adjust the humidity in the media stor-
age area.
Remove the moist media and replace it
with new, dry media.
appears.
Unsupported media Use KONICA MINOLTA-approved
(wrong size, thick-
ness, type, etc.) is
being used.
page 98.
One or more of the
print units may be
defective.
Remove the print units and check it for
damage. If it is damaged, replace it.
There is
insufficient
fusing or the
image
comes off
when
The media is moist
from humidity.
Remove the moist media and replace it
with new, dry media.
Unsupported media Use KONICA MINOLTA-approved
(wrong size, thick-
ness, type, etc.) is
being used.
media. See “Media Specifications” on
page 98.
rubbed.
Media type is set
incorrectly.
When printing envelopes, labels, post-
cards, thick stock, glossy, or transpar-
encies, specify the appropriate media
type in the printer driver.
The levers on the
fuser unit are set to
the position for
envelopes.
Before printing on media other than
envelopes, be sure to return the levers
on the fuser unit to the setting for plain
paper.
210
Solving Problems with Printing Quality
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Cause
Solution
There are
toner
One or more of the
print units may be
Remove the print units and check them
for damage. If one is damaged,
smudges or defective or installed replace it.
residual
images.
incorrectly.
There are
toner
The media transfer
roller is dirty.
Clean the media transfer roller.
If you think the transfer roller should be
replaced, contact Technical Support
with the error information.
smudges on
the back side
of the page
(whether or
not it has
been
The media path is
dirty with toner.
Print several blank sheets and the
excess toner should disappear.
One or more of the
print units may be
defective.
Remove the print units and check it for
damage. If it is damaged, replace it.
duplexed).
Abnormal
areas (white,
black, or
color)appear
in a regular
pattern.
The laser lens is dirty. Clean the laser lens.
A print unit may be
defective.
Remove the print unit with the color
causing the abnormal image. Replace
it with a new print unit.
211
Solving Problems with Printing Quality
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Cause
Solution
Image
The laser lens is dirty. Clean the laser lens.
defects.
A toner cartridge may Remove the toner cartridges and
be leaking.
check them for damage. If one is dam-
aged, replace it.
A print unit may be
defective.
Remove the print unit with the color
causing the abnormal image.
Replace it with a new print unit.
Lateral lines The printer is not
Place the printer on a flat, hard, level
surface.
or bands
appear on
image.
level.
The media path is
dirty with toner.
Print several sheets and the excess
toner should disappear.
One or more of the
print units may be
defective.
Remove the print units and check them
for damage. If one is damaged,
replace it.
Colors look One or more of the
Remove the print units and verify that
the toner is distributed evenly on each
cartridge roller, and reinstall the print
units.
drastically
wrong.
print units may be
defective.
One or more of the
toner cartridges may
be low or empty.
Check the control panel for an TONER
LOWXor TONER EMPTY Xmes-
sage. If necessary, replace the speci-
fied toner cartridge.
Colors are
The front cover is not Make sure that the printer’s front cover
not register- properly closed.
is closed.
ing properly;
colors are
mixed or
One or more of the
print units may be
defective.
Remove the print units and check them
for damage. If one is damaged,
replace it.
have page-
The media is moist
to-page vari-
Remove the moist media and replace it
with new, dry media.
from humidity.
ation.
212
Solving Problems with Printing Quality
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Cause
Solution
The color
has a poor
reproduction defective.
or has poor
One or more of the
print units may be
Remove the print units and check them
for damage. If one is damaged,
replace it.
color density.
If the problem is not resolved, even after all of the above have been per-
formed, contact Technical Support with the error information.
213
Solving Problems with Printing Quality
Download from Www.Somanuals.com. All Manuals Search And Download.
Status, Error, and Service Messages
Status, error, and service messages are displayed in the control panel mes-
sage window. They provide information about your printer and help you
locate many problems. When the condition associated with a displayed mes-
sage has changed, the message is cleared from the window.
Standard Status Messages
This message...
means...
do this...
After replacing a toner car- No action needed.
tridge or a print unit, or after
rebooting your printer after
environmental changes,
CALIBRATING
your printer automatically
pauses to do an Auto-Image
Density Control (AIDC)
cycle. This process is pro-
vided to make reliable
printer operation with opti-
mum output quality possible.
The job is being cancelled.
CANCELLING JOB
COPYING
The printer is printing with
the collating function.
The printer is in Energy
Saver mode to reduce
ENERGY SAVER
power consumption during
periods of inactivity. When a
print job is received, the
printer returns to normal
power within 30 seconds.
The firmware is being
updated.
FIRMWARE UPDATE
INITIALIZING
The printer is being initial-
ized.
The printer is printing.
PRINTING
The printer is processing
data.
PROCESSING
The printer is on and ready
to receive data.
READY
214
Status, Error, and Service Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
This message...
means...
do this...
The printer is being
restarted.
No action needed.
REBOOTING
The printer is warming up.
WARMING UP
Error Messages (Warning:
)
ꢀ"
“I-UNIT” in a message refers to the print unit.
This message...
means...
do this...
Contact Technical Sup-
The fuser unit has
FUSER UNIT
reached the end of its port with the error infor-
life. mation.
END OF LIFE
The hard disk is full. Delete print jobs saved
on the hard disk.
HDD
NEAR FULL
Since the hard disk
drive was formatted drive with one
with a different
machine, the hard
disk drive could not
be used.
Replace the hard disk
INCORRECT
HDD
compatible with this
machine, or select HDD
FORMATfrom SYS
DEFAULT MENUand
format the hard disk.
Since the
Replace the
INCORRECT
CompactFlash was
formatted with a
CompactFlash with one
compatible with this
MEMORY CARD
different machine, the machine, or select
CompactFlash could
not be used.
CARD FORMATfrom
SYS DEFAULT MENU
and format the
CompactFlash.
The Xprint unit is an Install a KONICA
INCORRECT
unapproved type.
MINOLTA print unit of
the appropriate type
(EU). See page 139.
I-UNIT X
The Xtoner cartridge Install a
INCORRECT
is an unapproved
type.
KONICA MINOLTA
TONER X
toner cartridge of the
appropriate type (EU).
See page 133.
215
Status, Error, and Service Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
This message...
means...
do this...
The memory card is Delete resources (fonts,
MEMORY CARD
NEAR FULL
nearly full.
forms, etc.) which saved
on the memory card by
using Download Man-
ager or PSWC.
Since incompatible
CompactFlash was
inserted into the
memory slot, the
CompactFlash could
not be used.
Use CompactFlash
compatible with this
printer.
NON SUPPORT
CARD
Tray X(Tray 1, 2, 3 or Load media into the
PAPER EMPTY
4) is empty.
specified tray.
TRAY X
(Appears when SYS
DEFAULT MENU/
ENABLE WARN-
ING/PAPER
EMPTY/TRAY X is
set to ON.)
Tray X(Tray 2, 3 or 4) Correctly install the
is not correctly
installed.
specified tray.
(Appears when SYS
DEFAULT MENU/
ENABLE WARN-
ING/PAPER
EMPTY/TRAY Xis
set to ON.)
Replace the Print unit.
I-UNIT END
X
The XPrint unit has
reached the end of its
life.
216
Status, Error, and Service Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
This message...
means...
do this...
The Xprint unit is low Prepare the specified
I-UNIT LOW
and should be
color print unit.
X
replaced within 2,000
pages at 5% cover-
age of letter/A4
pages.
(Appears when SYS
DEFAULT MENU/
ENABLE WARN-
ING/I-UNIT LOW
is set to ON.)
Replace the print unit.
Replace the staple
I-UNIT LIFE
X
The Xprint unit has
reached the end of its
life.
The staple finisher
STAPLER EMPTY
has run out of staples. cartridge.
Otherwise, the
staples are almost
empty.
The Xtoner cartridge Replace the toner car-
TONER EMPTY
is empty.
tridge.
X
Printing does not stop
immediately when this
message appears.
Therefore, if printing is
continued, the Operator
Call message “TONER
EMPTY” appears, and
then printing stops.
(Refer to page 222.)
The Xtoner cartridge Prepare the specified
is low and should be color toner cartridge.
replaced within 1,200
pages at 5% cover-
TONER LOW
X
age of letter/A4
pages.
(Appears when SYS
DEFAULT MENU/
ENABLE WARN-
ING/TONER LOWis
set to ON.)
217
Status, Error, and Service Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
This message...
means...
do this...
The transfer belt unit Replace the transfer belt
has reached the end unit and reset the
TRANS. BELT
END OF LIFE
of its life.
counter in the MAINTE-
NANCE MENU/SUP-
PLIES/REPLACE/
TRANS. BELTmenu.
The transfer roller has Replace the transfer
reached the end of its roller and reset the
TRANS.ROLLER
END OF LIFE
life.
counter in the MAINTE-
NANCE MENU/SUP-
PLIES/REPLACE/
TRANS. ROLLER
menu.
The hard disk is full. Print one copy of the file
Print jobs over 10,000 at a time.
pages cannot be col-
UNABLE TO
COLLATE JOB
lated.
A job set for stapling Reduce the printed
UNABLE TO
contains pages that
exceed the number of that can be stapled.
pages to the number
STAPLE JOB
pages that can be
stapled.
(Refer to page 129.)
The waste toner bot- Prepare a new waste
tle is nearly full. toner bottle.
WASTE TONER
NEAR FULL
218
Status, Error, and Service Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Messages (Operator Call:
)
This message...
means...
do this...
Tray 1 is removed
from the printer.
Install Tray 1
ADJUST TRAY1
The duplex cover is
open.
Close the duplex cover.
COVER OPEN
DUPLEX COVER
The finisher cover is Close the finisher cover.
open.
COVER OPEN
FINISHER COVER
The printer’s front
cover is open.
Close the front cover.
COVER OPEN
FRONT COVER
The printer’s right
side cover is open.
Close the right side
cover.
COVER OPEN
SIDE COVER
The stapler cover is
open.
Close the stapler cover.
COVER OPEN
STAPLER COVER
The right side cover Close the right side
of Tray X (Tray 3 or cover of the tray.
4) is open.
COVER OPEN
TRAYX COVER
The upper cover is
open.
Close the upper cover.
COVER OPEN
UPPER COVER
The fuser unit is not Contact Technical Sup-
FUSER MISSING
CHECK UNIT
installed.
port with the error infor-
mation.
The specified print job Print jobs can be saved
saved on the hard only if a hard disk is
disk is sent while the installed. If desired,
HOLD JOB ERROR
UNABLE TO
STORE JOB
hard disk is not
installed.
install a hard disk.
When printing a
stored job, the printer figuration to that when
configuration was
changed since the job
was stored.
Change the printer con-
HOLD JOB ERROR
“OPTIONAL”
PRESS CANCEL
the job was stored.
Tray 1 was specified Load the correct media
with the printer driver into Tray 1.
as Manual Feed for
MANUAL EMPTY
“SIZE”
“MEDIA”
printing, but Tray 1 is
empty.
219
Status, Error, and Service Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
This message...
means...
do this...
The Paper Source in
the printer driver is
set to Tray 1 (Manual
Feed), but there is
already media in the
tray when printing
begins.
MANUAL FEED
“SIZE”
“MEDIA”
Press the
key to
print, or remove and
reload the media in Tray
1.
The printer has
received more data
than can be pro-
Press the Cancel key to
cancel the print job.
Decrease the amount of
MEMORY FULL
PRESS CANCEL
cessed with its inter- data to be printed (for
nal memory.
example, by decreasing
the resolution), and then
try printing again.
If that doesn’t solve the
problem, install an
optional memory mod-
ule.
The output tray is full Remove all media from
of media. the output tray.
OUTPUT FULL
REMOVE PAPER
YYYY
The specified tray is Load the correct media
PAPER EMPTY
“SIZE”
“MEDIA”
empty. (Appears
when PAPER
MENU/PAPER
SOURCE/TRAY
CHAINING ONis
set.)
into the specified tray.
The media size/type Load the correct media
PAPER ERROR
“SIZE”
“MEDIA”
set in the printer
driver is different from
the size/type of media
loaded (Appears
when PAPER
size and type.
MENU/PAPER
SOURCE/TRAY
CHAINING ONis
set.)
220
Status, Error, and Service Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
This message...
means...
do this...
Media has misfed in
the duplex option.
PAPER JAM
DUPLEX1
Press the
key to dis-
play the help screen.
Follow the instructions in
the help screen to
remove the misfed
media.
Media has misfed in
the duplex option.
PAPER JAM
DUPLEX2
Media has misfed in
the transport section
of the staple finisher.
PAPER JAM
FINISHER
Media has misfed
leaving the fuser
area.
PAPER JAM
FUSER/EXIT
Media has misfed in
the feed section of the
main output tray.
PAPER JAM
MAIN EXIT
Media has misfed in
the transfer roller
area. This type of
misfeed means that
the media did not
make it to the media
exit area.
PAPER JAM
SECOND TRANS
Media has misfed in
the stapler.
PAPER JAM
STAPLER
Media has misfed in
the feed section of the
sub output tray.
PAPER JAM
SUB EXIT
Media has misfed in
Tray 1.
PAPER JAM
TRAY1
Media has misfed
while being pulled
from the specified
tray (Tray 2, 3 or 4).
PAPER JAM
TRAYX
Media has misfed in
the relay unit.
PAPER JAM
UPPER TRANS
Media has misfed in
the vertical transfer
area.
PAPER JAM
VERTICAL TRANS
221
Status, Error, and Service Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
This message...
means...
do this...
The XPrint unit has
completely reached
the end of its life.
Replace the Print unit.
I-UNIT END
REPLACE
X
The Xprint unit is not Install a correct KONICA
installed, or an unap- MINOLTA print unit.
proved print unit is
I-UNIT MISSING
CHECK X
installed.
The staples are
empty when an
attempt was made to
print a staple job.
Replace the staple car-
tridge.
STAPLER EMPTY
REPLACE STAPLE
CARTRIDGE
The Xtoner cartridge Replace the toner car-
is completely empty. tridge.
TONER EMPTY
REPLACE
X
The Xtoner cartridge Install a correct KONICA
TONER MISSING
is not installed, or an MINOLTA toner car-
CHECK X
unapproved toner
tridge.
cartridge is installed.
The X(Tray 1, 2, 3 or Load the correct media
4) was specified with into the specified tray.
the printer driver for
TRAY X EMPTY
“SIZE”
“MEDIA”
printing, but Tray Xis
empty. This message
appears when the
PAPER MENU/
PAPER SOURCE/
TRAY CHAINING
menu is set to OFF.
The media size/type Load the correct media
TRAYX PAPER ERR
“SIZE”
set in the printer
size and type.
driver is different from
the size/type of media
loaded. This message
appears when the
PAPER MENU/
“MEDIA”
PAPER SOURCE/
TRAY CHAINING
menu is set to OFF.
222
Status, Error, and Service Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
This message...
means...
The media size set in Load the correct media
the printer driver is size into the specified
different from the size tray.
of media loaded.
do this...
TRAYX SIZE ERR
ADD
“SIZE”
The media type set in Load the correct media
TRAYX TYPE ERR
ADD
“MEDIA”
the printer driver is
type into the specified
different from the type tray.
of media loaded.
The waste toner
bottle is full.
Install a new waste toner
bottle.
WASTE TONER FULL
REPLACE BOTTLE
The printer configura- Reboot the printer
tion was changed
CONFIGURATION ERR
when the printer
power was on.
The X toner cartridge Install a KONICAMI-
INCORRECT
TONER X
is an unapproved
type.
NOLTA toner cartridge
of the appropriate type
(EU). See page 133.
223
Status, Error, and Service Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
Service Messages:
These messages indicate a more serious error that can only be corrected by
a customer service engineer. If one of these messages appears, turn the
printer off, then turn it on again. If the problem persists, contact your local
vendor or authorized service provider.
This service
message...
means...
do this...
An error has been
detected with the item
indicated “XXXX” in the message, and printer
service message. operation can resume.
Reboot the printer. This
often clears the service
SERVICE CALL XXXX
“Error”
Information about errors If the problem persists,
appears at the bottom of contact Technical Sup-
the message window.
port.
224
Status, Error, and Service Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Note
Use of accessories not manufactured or supported by
KONICA MINOLTA will void your warranty.
ꢀ"
Dual In-Line
Memory Module
(DIMM)
This chapter provides information about the following accessories.
256 MB, 512 MB DIMM
(DDR-SDRAM, 266 MHz, 184 pins, No ECC, Unbuf-
fered, CL=2 or 2.5)
Duplex Option
Auto duplexing
Lower Feeder Unit 500-sheet tray included
(Tray 3/4)
Hard Disk Kit
40 GB Hard Disk
Compact Flash
256 MB, 512 MB, 1 GB
Note
Installing accessories always requires that the printer and accessories
are turned off and unplugged during installation.
Antistatic Protection
Note
It’s very important to protect the printer controller board from
electrostatic damage while performing any task involving the controller
board.
Turn off all power switches first. If an antistatic wrist strap is provided in
your printer option kit, attach one end of it to your wrist and the other
end to the bare metal chassis on the back of your printer. Never attach
the wrist strap to any piece of equipment with an electrical current
present. Plastic, rubber, wood, painted metal surfaces, and telephones
are not acceptable grounding points.
If you don’t have an antistatic wrist strap, discharge your body’s static
electric charge by touching a grounded surface before you handle any
printer boards or components. Also avoid walking around after
grounding yourself.
226
Introduction
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual In-Line Memory Module (DIMM)
ꢀ"
You may need additional memory (DIMM) for complex graphics and
for duplex (Double-Sided) printing.
Dual in-line memory module (or DIMM) is compact circuit board with sur-
face-mount memory chips.
The printer, which has two memory slots, has a 256 MB memory module
already installed in one of the slots. By using both slots, the memory can be
expanded to a maximum of 1024 MB (512 MB + 512 MB).
Installing a DIMM
Note
It’s very important to protect the printer controller board and any
associated circuit boards from electrostatic damage. Before performing
this procedure, review the antistatic caution on page 226. In addition,
always handle circuit boards by the edges only.
1
Turn off the printer and discon-
nect the power cord and inter-
face cables.
2
Using a screwdriver, remove the
screw. Then, slide the rear cover
to the right and remove it.
227
Dual In-Line Memory Module (DIMM)
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
5
Using a screwdriver, loosen the
seven screws. (Do not remove
them from the printer.)
Slide the panel slightly to the
right and lift it off the printer.
Insert the new DIMM straight
into the DIMM connector until
the latches snap into the locked
position.
Observe the keyed side of the
DIMM to align it with the connec-
tor. If you cannot snap the DIMM
into place, do not force it. Repo-
sition it, making sure that the
DIMM is seated completely in
the connector.
6
7
8
Reinstall the panel and tighten the seven screws.
Attach the rear cover.
Reconnect all interface cables.
228
Dual In-Line Memory Module (DIMM)
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Reconnect the power cord, and
turn on the printer.
10
Declare the additional Printer Memory in the Windows printer driver
(Properties/Configure tab).
11 Print a configuration page (PRINT MENU/CONFIGURATION PG) and
verify that the total amount of the RAM installed in your printer is listed.
229
Dual In-Line Memory Module (DIMM)
Download from Www.Somanuals.com. All Manuals Search And Download.
Hard Disk Kit
If a hard disk drive is installed, fonts can be downloaded and saved, and the
overlay function can be used.
Installing the Hard Disk drive
Note
It’s very important to protect the printer controller board and any
associated circuit boards from electrostatic damage. Before performing
this procedure, review the antistatic caution on page 226. In addition,
always handle circuit boards by the edges only.
1
Turn off the printer and discon-
nect the power cord and inter-
face cables.
2
Using a screwdriver, remove the
screw. Then, slide the rear cover
to the right and remove it.
230
Hard Disk Kit
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
5
Using a screwdriver, loosen the
seven screws. (Do not remove
them from the printer.)
Slide the panel slightly to the
right and lift it off the printer.
Plug the cable on the hard disk
drive into the connector on the
controller board.
231
Hard Disk Kit
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Insert the three mounting pins
on the hard disk drive into the
holes in the controller board in
the order shown in the illustra-
tion at the right to mount the
hard disk drive onto the control-
ler board.
7
8
Reinstall the panel and tighten the seven screws.
Attach the rear cover.
9
Reconnect all interface cables.
10
Reconnect the power cord, and
turn on the printer.
11
Declare the Hard Disk in the Windows printer driver (Properties/Configure
tab).
232
Hard Disk Kit
Download from Www.Somanuals.com. All Manuals Search And Download.
CompactFlash
If a CompactFlash card is installed, resources such as fonts, macros and pro-
files can be downloaded, and image files can be printed directly.
ꢀ"
ꢀ"
Only CompactFlash cards with a capacity of 256 MB, 512 MB or 1 GB
can be used.
The Hold Job function is not available with a CompactFlash card.
These functions require that an optional hard disk drive be installed.
Installing the CompactFlash card
Note
If the installed CompactFlash card was used with a device other than
this printer, such as a computer or digital camera, the card is
automatically formatted and all of its data is deleted.
Note
It is very important to protect the printer controller board and any
associated circuit boards from electrostatic damage. Before performing
this procedure, review the antistatic caution on page 226. In addition,
always handle circuit boards by their edges only.
1
Turn off the printer and discon-
nect the power cord and inter-
face cables.
233
CompactFlash
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
Using a screwdriver, remove the
screw. Then, slide the rear cover
to the right and remove it.
Using a screwdriver, loosen the
seven screws. (Do not remove
them from the printer.)
4
Slide the panel slightly to the
right and lift it off the printer.
234
CompactFlash
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Fully insert the CompactFlash
card into the appropriate slot.
When the CompactFlash card is
correctly inserted, the button on
the top side of the slot (circled in
the illustration) slightly pops out.
ꢀ"
Before removing the
CompactFlash card,
press in this button.
6
7
8
9
Reinstall the panel and tighten the seven screws.
Attach the rear cover.
Reconnect all interface cables.
Reconnect the power cord, and
turn on the printer.
10
Declare the Memory card in the Windows printer driver (Properties/Con-
figure tab).
235
CompactFlash
Download from Www.Somanuals.com. All Manuals Search And Download.
Duplex Option
Duplex (Double-Sided) printing can be performed automatically with the
duplex option and enough memory installed. See “Duplexing” on page 126.
Installing the Duplex Option
1
Turn off the printer.
2
Remove the cover on the right
side cover.
236
Duplex Option
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Remove the door at the side of
the right side cover.
4
5
Prepare the duplex option.
ꢀ"
Before installing the
duplex option, open the
duplex cover, and then
check that the knob is
positioned as shown in
the illustration. Then,
close the duplex cover.
Attach the duplex option, as
shown in the illustration.
237
Duplex Option
Download from Www.Somanuals.com. All Manuals Search And Download.
6
7
Open the duplex cover, and then
turn both knobs counterclock-
wise until they are horizontal to
secure the duplex option to the
right side cover.
Then, close the duplex cover.
8
Declare the Duplex Unit in the Windows printer driver (Properties/Config-
ure tab).
238
Duplex Option
Download from Www.Somanuals.com. All Manuals Search And Download.
Lower Feeder Unit
You can install up to two optional lower feeder units (Trays 3 and 4). Each
lower feeder unit increases your printer’s media feed capacity by 500 sheets.
Kit Contents
„ Lower feeder unit with a tray (500-sheet capacity)
„ Four metal brackets
– Two front brackets
– Two rear brackets
„ Four securing screws
„ Transport guide (used only for Tray 3)
239
Lower Feeder Unit
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing a Lower Feeder Unit
Note
Since consumables are installed in the printer, be sure to keep the
printer level when moving it in order to prevent accidental spills.
1
Turn off the printer and discon-
nect the power cord and inter-
face cables.
2
3
Prepare the lower feeder unit.
ꢀ"
Be sure to place the lower feeder unit on a level surface.
Open the right side cover of the
lower feeder unit.
ꢀ"
The right side cover of the lower feeder must be opened before the
feeder can be installed onto the printer.
240
Lower Feeder Unit
Download from Www.Somanuals.com. All Manuals Search And Download.
4
With another person’s help,
place the printer on top of the
lower feeder unit, making sure
that the positioning pins on the
lower feeder unit correctly fit into
the holes on the bottom of the
printer.
44 kg
97 lbs
ꢀ"
If two lower feeder units are to be installed, stack the two lower
feeder units and secure them together before installing them to the
printer.
WARNING!
This printer weighs approximately 44 kg (97.0 lb) when it is fully loaded
with consumables. The printer must be lifted by two people.
5
Using a screwdriver, install the
two securing brackets at the rear
of the printer.
241
Lower Feeder Unit
Download from Www.Somanuals.com. All Manuals Search And Download.
6
7
Pull out the trays.
Install the two securing brackets
at the front of the printer.
8
9
Close the trays.
Attach the transport guide to the
right door of Tray 3.
ꢀ"
It is not necessary to
attach the transport guide
to the right door of Tray 4.
242
Lower Feeder Unit
Download from Www.Somanuals.com. All Manuals Search And Download.
10
11
Close the right side cover of the
lower feeder unit.
Declare Paper Source Unit 3/4 in the Windows printer driver (Properties/
Configure tab).
243
Lower Feeder Unit
Download from Www.Somanuals.com. All Manuals Search And Download.
Staple Finisher
When the staple finisher is installed, job separation, offset and staple printing
can be performed.
Accessories
1 Staple Finisher
2 Relay Unit
3 Main output tray
2
4 Sub output tray
5 Hooks (For securing the
6
relay unit)
5
6 Hooks (For installing the
staple finisher)
7 Mounting clips for the main
output tray
4
1
7
1
2
3
3
4
5
6
7
244
Staple Finisher
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Remove the two mounting hooks
in the bag taped to the back of
the relay unit.
ꢀ"
ꢀ"
Since the gears (1) are
exposed, be careful not
to grab them or hit them.
2
Since the performance of
the transport roller and
springs (2) may be
greatly reduced if they
are firmly grabbed, treat
them with special care.
1
6
Turn off the machine and discon-
nect the power cord and inter-
face cables.
246
Staple Finisher
Download from Www.Somanuals.com. All Manuals Search And Download.
7
8
9
Remove the output tray from the
machine.
ꢀ"
While lightly bending the
output tray as much as
possible, remove the out-
put tray.
Remove the inside cover (three
locations) at the top of the
machine.
Use a coin to remove the front
cover (two locations) at the top
of the machine.
247
Staple Finisher
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Install the relay unit on the
machine.
11
Open the relay unit cover.
248
Staple Finisher
Download from Www.Somanuals.com. All Manuals Search And Download.
12
13
14
With your fingers, press the left
and right pins. Make sure that
the pins are pushed in.
Secure the relay unit on the
machine with the two mounting
hooks.
Lock the relay unit lever.
249
Staple Finisher
Download from Www.Somanuals.com. All Manuals Search And Download.
15
16
Close the relay unit cover.
Remove the two finisher-mount-
ing hooks from the box.
17
Remove the main output tray
and the sub output tray, and then
unpack them.
18
Hold the left and right sides of
the staple finisher and lift it out of
the box.
ꢀ"
When grabbing the staple
finisher, be sure to grab
the areas indicated in the
illustration.
19
Remove the sheet from the sta-
ple finisher.
250
Staple Finisher
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Remove the packing tape and
packing materials from the con-
nectors and the outside of the
staple finisher.
21
22
Open the stapler cover, and then
remove the tape securing the
staple cartridge.
Use a coin to remove the cover
(two locations) on the left side of
the machine.
251
Staple Finisher
Download from Www.Somanuals.com. All Manuals Search And Download.
23
24
Secure the two mounting hooks
on the staple finisher to the left
side of the machine.
Align the side of the relay unit
with that of the staple finisher,
and then hook them onto the fin-
isher to install them.
ꢀ"
When grabbing the staple
finisher, be sure to grab
the areas indicated in the
illustration.
252
Staple Finisher
Download from Www.Somanuals.com. All Manuals Search And Download.
25
26
27
Remove the two mounting clips
from the main output tray.
Insert the main output tray.
Secure the main output tray with
the mounting clips.
253
Staple Finisher
Download from Www.Somanuals.com. All Manuals Search And Download.
28
29
Install the sub output tray.
Insert the connector on the fin-
isher into the connector on the
machine.
30
31
Reconnect the power cord, and
turn on the machine.
Declare the staple finisher in the
printer driver (Properties/Config-
ure tab).
254
Staple Finisher
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Specifications
Printer
Safety standards European model EU Directive 73/23/EEC
EU Directive 93/68/EEC
EN 60950-1 (IEC 60950)
EMC standards
European model EU Directive 89/336/EEC
EU Directive 93/68/EEC
EN 55022 (CISPR Pub. 22) class B
EN 61000-3-2
EN 61000-3-3
Technical Specifications
Printer
Type
Desktop Tandem Full Color A4 laser beam
printer
Print system
Electro photographic Printing System
(4colors/toner bottle + print unit of supply type)
Exposure system
Developing system
Resolution
4 laser diode and 1 polygon mirror
Mono-component SMT
600 dpi × 600 dpi × 4 bits
First print
Simplex
Monochrome/ Full color:
14 seconds for A4/ Letter (plain
paper)
Duplex (Double-Sided)
Monochrome:
19 seconds for A4/ Letter (plain
paper)
Full color:
21 seconds for A4/ Letter (plain
paper)
256
Safety Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
Print speed
Simplex
Monochrome:
35/37 page per minutes for A4/
Letter (plain paper)
Full color:
30/31.7 page per minutes for A4/
Letter (plain paper)
Duplex (Double-Sided)
Monochrome:
22.5 page per minutes for A4/
Letter (plain paper)
Full color:
19.4 page per minutes for A4/
Letter (plain paper)
Media sizes
Paper/Media
Tray 1 (Manual feed tray)
Paper width: 92 to 216 mm (3.6 to 8.5")
Paper length: 148 to 1200 mm (5.8 to 47.2")
Tray 2
A4/Letter
Trays 3 and 4 (Optional)
B5 (JIS) - Legal
• Plain paper (60 to 90 g/m2; 16 to 24 lb bond)
• Recycled (60 to 90 g/m2; 16 to 24 lb bond)
• Transparencies
• Envelopes
• Letterhead
• Label
• Thick 1 (91 to 150 g/m2)
• Thick 2 (151 to 210 g/m2)
• Postcard
• Glossy 1
• Glossy 2
Input capacity
Tray 1 (Manual feed tray)
Plain/Recycled paper:100 sheets
Envelope:
10 envelopes
Label/Postcard/Thick 1/Thick 2/Glossy 1/
Glossy 2/Transparency/Letterhead: 20 sheets
Banner paper: 1 sheet
Tray 2
Plain/Recycled paper:500 sheets
Tray 3 and 4 (Optional)
Plain/Recycled paper:500 sheets
257
Technical Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
Output capacity
Output tray: 250 sheets (A4, Letter)
Finisher output capacity
Main output tray: 500 sheets (A4 or Letter)
Sub output tray: 100 sheets (A4 or Letter)
Operating temperature
Operating humidity
Power supply
10 to 35°C (50 to 95°F)
15 to 85%
220 to 240 V, 50 to 60 Hz
Power consumption
230 V: 1400 W or less
Energy Saver Mode: 18 W or less
Amperage
220 to 240 V: 6.5 A or less
Warm-up time
Avg. 45 seconds (Time to return to READY from
the ENERGY SAVER mode)
Acoustic Noise
Printing: 56 dB or less
Standby: 39 dB or less
External dimensions
Height: 420 mm (16.5")
Width: 526 mm (20.7")
Depth: 420 mm (16.5")
Weight
Printer: approximately 33.4 kg (73.6 lb) (Not
including consumables)
approximately 44 kg (97.0 lb) (Packaged
condition/including consumables)
Toner cartridge:
Standard in-box cartridge =
1.65 kg (3.64 lb) (Y, M, C)/
1.68 kg (3.70 lb) (K)
Replacement cartridge (High-Capacity)=
1.65 kg (3.64 lb) (Y, M, C)/
1.68 kg (3.70 lb) (K)
Interface
USB 2.0 (High Speed) compliant, 10Base-T/
100Base-TX/1000Base-T Ethernet, Parallel
CPU
Freescale PowerPC7448
866 MHz
Standard memory
256 MB
258
Technical Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
Consumable Life Expectancy Chart
User-Replaceable
Item
Average Life Expectancy
Toner cartridge
Standard in-box Cartridge:
Printed within a constant environment
12,000 pages or more (Continuous)
Printed outside of a constant environment
9,600 pages or more (Continuous)
Replacement Cartridge (High-Capacity):
Printed within a constant environment
12,000 pages or more (Continuous)
Printed outside of a constant environment
9,600 pages or more (Continuous)
Print unit
30,000 pages (Continuous)
Waste toner bottle
36,000 pages (Monochrome) (Continuous)
9,000 pages (Full color) (Continuous)
Transfer roller
120,000 pages (Continuous)
Ozone Filter (Bundle with 120,000 pages
transfer roller)
Transfer belt unit
120,000 pages (Continuous)
Note: A constant environment is one with a temperature between
15 °C [59 °F] and 25 °C [77 °F] and humidity between 35% and 70%.
ꢀ"
The values shown for the toner cartridge and waste toner bottle indi-
cate the number of pages for simplex printing using A4/Letter-size
media with 5% coverage.
The actual life may differ (be shorter) depending on the printing condi-
tions (coverage, paper size, etc.), differences in the printing method,
such as continuous printing or intermittent printing (when print jobs of
one page are often printed), or the type of paper used, for example,
thick paper. In addition, the life will be affected by the temperature and
humidity of the operating environment.
Service-Replaceable
Item
Average Life Expectancy
150,000 pages (Continuous)
300,000 pages
Fuser unit
Media feed roller
259
Technical Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
Our Concern for Environmental Protection
As an ENERGY STAR® Partner, we have determined that this machine meets
the ENERGY STAR Guidelines for energy efficiency.
What is an ENERGY STAR product?
An ENERGY STAR product has a special feature that allows it to automati-
cally switch to a “low-power mode” after a period of inactivity. An ENERGY
STAR product uses energy more efficiently, saves you money on utility bills
and helps protect the environment.
260
Our Concern for Environmental Protection
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Transfer belt unit 152
A
Accessories 226
CompactFlash 233
DIMMs 227
Duplex option 236
Hard disk Kit 230
Lower feeder unit 239
Staple Finisher 244
Antistatic protection 226
Duplexing 126
E
C
Electrostatic discharge 226
Envelopes 101
Camera direct 94
CompactFlash 233
Configuration menu 32
Consumables
Error messages 215
Backup battery 158
Ozone filter 151
Print unit 139
F
Finishing 128
Staple Finisher 244
Staple 161
Toner cartridge 132
261
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Memory Direct 96
G
Glossy Media 106
Misfeed problems 199
Media path 178
H
Hard disk Kit 230
Preventing 177
I
Imageable area 107
L
Labels 102
Preventing media misfeeds 177
Letterhead 103
Loading media 108
Lower feeder unit 239
M
Maintenance 166
Media
Clearing misfeeds 179
Imageable area 107
Loading 108
Path 178
Preventing misfeeds 177
Media misfeed
Duplex option 187
Fuser unit 188
Relay Unit 193
Staple Finisher 194
Staples 197
Uninstalling 15
Transfer roller 191
Tray 1 191
Tray 2 181
Tray 3 and 4 185
Media path 178
Media storage 130
Media type
Envelopes 101
Glossy media 106
Labels 102
Service messages 224
Staple Finisher 244
Status monitor 24
Opening 24
Using 24
Letterhead 103
Plain paper 99
Postcards 104
Thick stock 101
Transparencies 105
T
Thick stock 101
Transparencies 105
Troubleshooting 175
262
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
|
InFocus Network Card U630 User Manual
Ingersoll Rand Marine Sanitation System LP3005 1 User Manual
Invacare Mobility Aid 00 313 User Manual
Jasco Switch 15306 User Manual
Jet Tools Planer JWP 208HH 1 User Manual
Kambrook Fryer KD66B User Manual
Ken A Vision Microscope Magnifier t 1252c User Manual
Kenwood Marine Radio TM 281A User Manual
KitchenAid Clothes Dryer KEYE664W User Manual
Kompernass CD Player KH 2331 User Manual