Kompernass TV DVD Combo KH 2360 User Manual

KH 2360

MOBILE DVD-PLAYER WITH TWO MONITORS

WITH TWO MONITORS

Instruction Manual

KOMPERNASS GMBH · BURGSTRASSE 21 · D-44867 BOCHUM

www.kompernass.com

ID-Nr.: KH2360-06/07-V3

Download from Www.Somanuals.com. All Manuals Search And Download.

Index

Page

1. Technical Data

2. Applications and functions

3. Safety Instructions

4. Appliance description

5. Starting Up the Device

6. Attaching the LCD monitor to a headrest

7. Carrying out connections

7.1 Connecting the LCD monitors to the DVD player

7.2 Mains power connection

7.3 Connection to another device

7.4 Headphone connection

7.5 Setting the display position

8. Card reader and USB connection

8.1 Inserting memory cards/USB memory sticks with MP3/WMA/Mpeg4/

JPEG data

8.2 Displaying the contents of the memory card/USB memory stick

8.3 Removal of Memory cards/USB Memory sticks from the memory card slot

8.4 Playback procedure for a memory card:

9. Use

9.1 Switching the device on and off in the standby mode

9.2 Display settings

9.3 Setting the image format

10. The setup menu

10.1 General Setup Page

10.2 Video Setup Page

10.3 Preference Page

11. Sound functions

11.1 To control the Volume

11.2 Mute

12. Playback functions

12.1 Playback start, stop, pause

12.2 SKIP function (Chapter/Title forward/backward)

- 1 -

Download from Www.Somanuals.com. All Manuals Search And Download.

12.3 Search forward/backwards

12.4 Slow motion function (DVD, VCD, S-VCD and DivX only)

12.5 Image enlargement (Zoom)

12.6 Viewing angle (DVD only)

12.7 Repeat function for DVDs, VCDs, S-VCDs and Audio CDs

12.8 Repeat sequence (A – B)

12.9 Direct title/track selection

12.10 Direct chapter, title or time selection via the search function

13. Display functions

13.1 Display disc information

13.2 Accessing the DVD menu

13.3 Playback Control (PBC) with VCDs/S-VCDs

13.4 Superimpose and fade out subtitles(DVDs/VCDs/S-VCDs only)

13.5 Changing the playback language

13.6 Programming function

14 Display of MP3/ WMA/JPEG/AVI/MPEG and DivX data

15. Playback of MP3/ WMA/MPEG and DivX discs

15.1 Repeat function with MP3/WMA/ MPEG/JPEG/DivX discs

15.2 Replay of JPEG discs

16. Playback of USB/SD/MMC data mediums

16.1 Compatible data mediums

16.2 Using USB/SD/MMC data mediums

17. Cleaning of the DVD player

18. Disposal

19. Troubleshooting

20. Glossary / Key Word Index

21. Warranty and service

22. Importer

Read these operating instructions carefully before using the appliance for the first time and preserve this manual for later

reference. Pass this manual on to whoever might acquire the appliance at a future date.

- 2 -

Download from Www.Somanuals.com. All Manuals Search And Download.

The SilverCrest KH 2360 DVD player with two 7 inch LCD displays contains copyright protection technology,

which protects it from process claims of certain US patents, for example other intellectual property rights of

the Macrovision corporation and other copyright owners.

The use of this copyright protection technology must be approved by the Macrovision corporation and is

intended exclusively for non commercial use in private surroundings; any other use requires the express

approval of Macrovision Corporation.

Reverse engineering and disassembling are expressly prohibited.

Manufactured under license from Dolby Laboratories, Inc.

Dolby and the double-D-symbols are registered trademarks of Dolby Laboratories,

Inc. Confidential Unpublished Works.

This appliance is protected by the US patents 4.631.603, 4.577.216, 4.819.098, 4.907.093 and

6.516.132.

The license applies exclusively for private use.

The Silvercrest KH 2360 DVD player is licensed as a DivX Certified Product.

- 3 -

Download from Www.Somanuals.com. All Manuals Search And Download.

KH 2360

2. Applications and

functions

Portable DVD player

The SilverCrest KH 2360 DVD player is intended

exclusively for private, non commercial use in enclosed

spaces.

Playback formats

• DVD videos in the 12cm and 8cm (diameter) for-

mats marked with the country/region code 2 or

1. Technical Data

ALL

and by the logo DVD video

DVD player

Power consumption

• MPEG4 and DivX "Standard" videos (DivX ver-

sions 3.11, 4.x, 5.x, 6.x).

DVD player + 2 LCD: 24 Watt

• Video CDs (VCDs) and Super Video CDs (S-VCDs)

in the 12cm and 8cm (diameter) formats.

TV standard:

PAL/NTSC

Operating temperature: 10° +40°C

• Audio CDs in the 12cm and 8cm (diameter) for-

Operation humidity:

80 %

mats marked with the logo CD

(No condensation)

• Data format CD Audio (.cda), MP3 (.mp3), Win-

dows Media Audio (.wma), DivX (.avi), (.mp4)

and JPEG (.jpg) on the storage medium CD-R,

CDRW, USB memory stick as well as memory

cards of the type SD and MMC.

max. storage

medium size:

Laser:

1GB (USB/memory card)

Laser class 1

Mains plug

Input:

AC 100-240 V 50/60 Hz 0,6A

Output/playback device

Output:

DC 12 V - 2.5A

The following devices can be connected to the DVD

player for image output/playback (if these devices

have available the corresponding connection potentials

and connection of a DVD player is provided for/

allowed by the manufacturer of the playback device):

• Stereo and Mono televisions with the formats PAL

or NTSC and the picture formats 4:3/16:9.

• LCD/Plasma screens or video projectors.

• Video devices such as DVD player, video recorder,

TV receiver or game consol.

Manufacturer: Kuantech (Shen Zhen) Co., LTD.

Model: KSAFE1200250W1UK

Vehicle adapter

Type:

KD627

Input:

Output:

DC 12 V/max. 10 A

1500 mA

Headphones

Model:

Impedance:

LXF-D103

32 15% Ohm

3 mW

For output/playback of sound and/or music the fol-

lowing devices can be used and/or connected to

the portable DVD player:

Power rating:

max. power consumption:

10 mW

• from the speaker of one of the televisions connec-

ted to the DVD player

LCD screens

• from external audio components such as a HiFi

system, receiver or surround sound system (analo-

gue)

Resolution:

480(H) x 243 (V) Pixels

Viewing area: 154,08° (H) - 87,5° (V)

• from other external image and sound sources

- 4 -

Download from Www.Somanuals.com. All Manuals Search And Download.

The two supplied 7 inch LCD monitors, which con-

nect to the DVD player, are provided for image and

sound outputs.

Never submerge the device or the power cable

in water. Wipe it only with a slightly damp cloth.

• Do not expose the appliance to rain and never

use it in a humid or wet environment.

• Make sure that the power cord does not become

wet during operation.

Important!

No liability/warranty will be assumed for damage

resulting from improper use of the device!

• You may not open the housing or repair the

appliance yourself. Should you do so, appliance

safety can no longer be assured and the warranty

will become void.

• Protect the appliance against drip and spray

water. Do not place any water-filled vessels (e.g.

flower vases) on the appliance.

• If water enters the DVD player or the LCD moni-

tors or if they fall into water, irreparable damage

can occur and there exists the danger of electric

shock!

3. Safety Instructions

• This appliance is not suitable for children or for

people whose physical, sensorial or intellectual

faculties prevent the safe usage of the appliance

without support or supervision. Children should be

watched-over to ensure that they do not play with

the appliance.

• Pull the power supply unit from the power socket

after every use and before cleaning to avoid unin-

tentional switch ons.

• Check the appliance and all parts for visible

damage. The safety concept can work only if

the appliance is in a faultless condition.

• The power plug must always be easily accessible,

so that the appliance can be quickly separated

from the mains in the event of an emergency.

Risk of fire!

• Do not use the appliance in the vicinity of hot

surfaces.

• Do not keep the appliance in places exposed to

direct sunlight, Otherwise, it may overheat and

become irreparably damaged.

• Do not leave the appliance unattended when in

use.

• Never cover the ventilation slots of the appliance

while it is being used.

Danger of electrical shocks.

•

Connect the appliance only to correctly installed

and properly earthed power sockets. The mains

voltage must conform with the specifications on the

ratings plate of the power supply unit.

• Do not operate the DVD player in the immediate

vicinity of a heat source such as an oven, hot air

blowers (in a vehicle: close to heating vents) and

similar devices! Heat contact can lead to the

equipment overheating and to melting of plastic

parts, whereby the DVD player could be irrepa-

rably damaged!

• Only use the supplied power supply unit. If you

replace the power supply unit, only replace it

with one of the same model.

• Arrange for defective power plugs and/or cables

to be replaced at once by qualified technicians

or our Customer Service Department.

• Arrange for customer service to repair or replace

connecting cables and/or appliances that are

not functioning properly or have been damaged.

- 5 -

Download from Www.Somanuals.com. All Manuals Search And Download.

• Do not operate the DVD player in cupboards, on

shelves, in the glove compartment or other enclosed

furnishings as well as not on beds and covers

because the ventilation of the DVD player will be

impaired and it could overheat.

Danger! Laser radiation!

The appliance is fitted with a „Class 1 Laser“.

• Never open the device.

• Never attempt to repair the device.

• There is invisible laser radiation inside the device.

Do not expose yourself to the laser beam.

When overheated the DVD player can be

irreparably damaged and the risk of a

fire exists

Thunderstorms!

• This device must not be placed in the immediate

vicinity of flammable materials, for example cur-

tains, flammable liquids etc.

• Do not place any open sources of fire, like candles,

on the device.

Equipment connected to a power supply can

be damaged during a thunderstorm.

For this reason always remove the power supply

unit from the power socket during a thunder-

storm.

Injury hazard

Important!

• Keep children away from the connecting cable

and the appliance. Children frequently underesti-

mate the dangers of electrical appliances.

• Ensure that the appliance stands with a safe and

secure positioning.

• Do not operate the appliance if it has sustained

a fall or is damaged. Arrange for the appliance

to be checked and/or repaired by qualified tech-

nicians.

Plug the power supply unit of the DVD player

into a power socket only after you have con-

nected the DVD player to a television or to the

7 inch LCD monitors. With a power connection

via the vehicle adapter, connecting the adapter

is always the last step. In the event that you

wish to change the type of video or audio

connection first pull beforehand, without fail,

the power supply unit from the power socket!

Otherwise the DVD player and possibly equip-

ment connected to it could become irreparably

damaged through voltage peak strikes!

• Keep batteries away from children. Children can

put batteries into their mouths and swallow them.

Important!

Never mount the device and monitors in the

vehicle whilst it is in motion!

There is a considerable risk of injury in the

event of an accident!

Use the device mounted in the vehicle only

when the vehicle is standing still.

The main switch on the right side is used for

the ON/OFF function. It is not used as a dis-

connect switch for the mains voltage. The power

supply unit is used to disconnect from the mains

power. In order to completely disconnect the

equipment from the mains voltage the power

supply unit must be pulled from the power socket.

The power socket for the power supply unit

should be situated close to the device and

easily accessible

Make sure that the device is securely packed

away in the supplied carrying case whilst driving.

- 6 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Notice regarding surge voltages

(FEO / fast electrical overloads):

In a case of malfunction due to an electrical fast tran-

sient (power surge) the product must be returned to

default settings in order to re-establish normal opera-

tion. It is possible that the power supply will have to

be disconnected and then reconnected again. The

batteries (if present) must be removed and then reins-

erted.

4. Appliance description

Ạ Remote control

POWER button

(Switch the DVD player on and off)

DISP button

(Display of the playback information)

N/P button (NTSC/Pal/Multi selection)

PLAY/PAUSE button

(Start and pause of the current playback)

STOP button (Stop playback)

FF button (Fast forward - x2, x4, x8, x16, x32)

REPEAT button

(Repeat chapter, title, song, the entire disc)

SETUP button

Notice regarding the handling of

batteries/rechargeable battery pack

The remote control is run by a battery. For the handling

of batteries please observe the following:

Risk of Explosion!

(Superimpose OSD / settings menu)

o Navigation buttonꢀ

Do not throw batteries into a fire. Do not

recharge non-rechargeable batteries.

MENU (Superimpose DVD menu)

VOL +/- buttons

• Only recharge batteries that are specifically designa-

ted "Rechargeable" or are designed to be recharged.

• Never open batteries, never solder or weld batteries.

The risk of explosions and injuries exist!

• Regularly check the condition of the battery.

Leaky batteries can damage the remote control.

• If you do not intend to use the remote control for

a long time, remove the battery.

(Volume output increase/decrease)

USB/CARD/DVD button

(Select USB/memory card contents)

PREV button

(Skip backwards a chapter or unit)

SLOW button

(Adjust playback speed)

NEXT button

• Put on protective gloves when handling a depleted

battery.

• Clean the battery compartment and the battery

contacts with a dry cloth.

(Skip forwards a chapter or unit)

j Navigation buttonꢁ

ENTER button (Confirm input)

l Navigation buttonꢂ

;

MONITOR 1/2 button

(Select LCD monitor AV-IN and DVD)

2) Number buttons

to 9 (Numerical input 0-9)

2! 10+ button (for two digit number input)

2@ GOTO button (Skip to chapter or song)

2# PROGRAMME button

(Set the title or song sequence)

2$ ZOOM button (Image enlargement/reduction)

2% ANGLE button (Change camera perspective)

2^ SUBTITLE button (Superimpose/fade out subtitles)

2& AUDIO button (Change playback language)

2* FR button (Fast rewind - x2, x4, x8,x16, x32)

- 7 -

Download from Www.Somanuals.com. All Manuals Search And Download.

2( A-B button (Repeat sequence)

3) TFT MODE button (Set contrast, hue, saturation

and sharpness)

3! Navigation button ꢃ

3@ TITLE button (Superimpose DVD/CD contents)

3# MUTE button

^ẦUnderneath the LCD monitor

5! CONNECT TO MAIN UNIT

(Connection socket to the DVD player)

5@ PHONE (Headphones connection)

5# BRIGHTNESS (Adjust the brightness of the LCD

screens)

(Switch off playback sound)

5$ SCREEN (Format change switch 16:9/4:3)

ạ Top of the DVD player

3$ OPEN button

^ầLCD monitor right side

5% POWER (LCD monitor on/off switch)

5^ VOLUME

(press to open the disc draw)

(Volume control for LCD monitors only)

Ả Rear of the DVD player

3% AV OUT (Audio/Video output)

3^ MONITOR 1 (Connection socket for LCD monitor 1)

3& MONITOR 2 (Connection socket for LCD monitor 2)

5. Starting Up the Device

^ảRight side of the DVD player

3* VOLUME

5.1 Unpacking

(DVD players headphone output volume control)

3( Phone (Headphone connection)

4) AV IN

1. Remove the DVD player, both monitors and the

accessories from the packing.

2. Remove all adhesive tapes, foils and transport

restraints.

(Audio/Video input for external devices)

4! POWER OFF/ON (Switch off/on)

4@ DC IN 12V

Important

(Connection socket for 12V power supply)

4# USB (USB connection)

Do not permit small children to play with plastic

packaging. There is a risk of suffocation!

^ẤFront panel of the DVD player

4$ SD/MMC

5.2 Check the delivered contents

Before puting the appliance into use, check that all

items are present and free of visible damage.

1 DVD Player

(Memory card slot for SD/MMC cards)

4% IR (Infrared receiver sensor)

4^ ON/STANDBY

2 7 inch LCD monitors

(Standby indicator)

Remote control

1 Battery for the remote control, CR2025/ 3 V

1 Power supply unit

1 AV cable 3 x Cinch on 3.5mm jack plugs

2 DIN connection cables for the LCD monitors

1 Vehicle adapter

^ấFront panel of the LCD monitor

4& Monitor

4* Power LED

(Illuminates red when the device is switched off)

4( IR sensor for the remote control signal

5) LCD monitor speaker

1 Carrying case with two securing straps for the

headrest

2 Headphones

1 Operating manual

- 8 -

Download from Www.Somanuals.com. All Manuals Search And Download.

5.3 Preparing the remote control

6. Attaching the LCD

monitor to a headrest

Inserting the battery

The remote control requires a battery of the type

CR2025/3V button cell (supplied):

For attachment to the headrest use exclusively the

supplied Velcro fastening strap and pad.

1. Remove the pad from the Velcro fastening

strap.

1. Pull the battery compartment out of the remote

control.

2. Now place the supplied battery, of the type

CR2025 (button cell) in the battery compart-

ment. Make sure that the battery is inserted in

accordance with its correct polarity.

3. Slide the battery compartment back into the

remote control.

2. Pull the Velcro fastening strap, with the Velcro

side towards the rear, through the right retainer

on the rear of the LCD monitor. Please do not

pull the strap through the left retainer at this

time.

Using the remote control

In order to guarantee faultless operation when using

the remote control…

• When using the remote control always point it di-

rectly at the infrared sensor 4( on the front panel

of the device.

• Make sure that there are no obstructions between

the remote control and the DVD player that will

hinder reception

3. Pull the open end of the strap through the pad.

• When using the remote control place yourself not

more than 5 metres from the DVD player

otherwise interferences can occur during operation

of the DVD player functions with the remote control.

The unpaded side must be facing the device.

4. Finally, pull the strap through the left retainer.

The plastic tab should now point to the right.

- 9 -

Download from Www.Somanuals.com. All Manuals Search And Download.

5. Before fastening, place the elastic safety strap

that is secured to the LCD monitor, around the

headrest and/or headrest mounting.

8. Join the open end of the Velcro fastening strap

with its opposite side at the front of the headrest.

Make sure that the strap sits securely and is

tight.

9. The Velcro fastening strap should be attached

to the centre of the headrest. If possible do not

impede the headrests height adjustment mecha-

nism.

6. Hold the LCD monitor against the headrest and

pull the Velcro strap from the inside to the outside,

through the plastic tab. The Velcro must also here

point in the direction of the headrest.

Note:

If you are using the LCD monitor in a vehicle

make sure that the monitor does not interfere

with safety relevent components such as air-

bags, seat airbags or side airbags.

Fastening to active headrests is not recommended.

If you install the LCD monitors in a vehicle

make sure that the cables are layed in a manner

that will not cause them to be a trip hazard

and they do not obstruct entry to and exit

from the vehicle.

7. The plastic tab should lie to the left side, viewed

from the direction of travel, of the headrest

(as in the diagram above).

- 10 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Important!

If you install the LCD monitors in a vehicle

make sure that the cables are layed in a manner

that will not cause them to be a trip hazard

and the connection cables to the DVD player

do not obstruct entry to and exit from the vehicle.

Never mount the device and monitors in the

vehicle whilst it is in motion!

There is a considerable risk of injury in the event

of an accident!

Use the device mounted in the vehicle only

when the vehicle is standing still.

In addition the device can be connected to other

input and output devices:

Make sure that the device is securely packed

away in the supplied carrying case whilst driving.

• with a television set

• with a video or DVD recorder

• with a receiver, also, for example, a stereo

system

• with a Dolby Digital system

7. Carrying out

connections

Important!

Make sure that all devices are switched off before

you connect them. Do not plug the device into

the mains power until all connections have

been made.

7.1 Connecting the LCD monitors to

the DVD player

7.2 Mains power connection

Connection with the power supply unit

Connect both LCD monitors to the DVD player by joining

the sockets CONNECT TO MAIN UNIT 5!on the monitors

with the inlets MONITOR 1 3^and MONITOR 2 3&each

with a DIN connection cable.

1. Plug the power supply unit device plug in the

socket DC IN 12V 4@ on the DVD player.

2. Plug the power supply unit into a power socket.

Note:

Before you connect the DVD player to the

mains power with the power supply unit,

switch the DVD player with the POWER

ON/OFF switch 4! off - Position OFF. First

connect the device plug with the socket

DC IN 12V 4@ on the DVD player.

Use exclusively the two supplied DIN connection

cables to connect the LCD monitors to the

DVD player.

You can also connect only one LCD monitor

to the DVD player.

- 11 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Making a power connection with the vehicle adapter

7.3 Connection to another device

Connection to a television

The DVD player can be connected to televisions

which operate with the PAL or NTSC standards.

In this way you can transmit the display onto the

television screen.

1. Plug the device plug of the vehicle adapter in the

socket DC IN 12V 4@on the side of the device.

2. Plug the vehicle adapter into a suitable 12V

socket, for example the cigarette lighter con-

nection in the vehicle.

Note:

- The supplied vehicle adapter may only be

used in vehicles with a 12V power system.

- The DVD player may only be operated with

the supplied vehicle adapter.

- Do not use the supplied vehicle adapter for

other devices.

- After use remove the vehicle adapter from

the DVD player and from the vehicles power

socket.

1. Switch off the DVD player and the television.

2. Connect the jack plug of the supplied AV cable

with the AV-OUT output 3% on the DVD player.

3. Connect the yellow cinch cable for the image

signal with the FBAS video input (yellow) on

the television.

4. Connect the red/white cinch cable for the

sound signal with the sound input (red/white)

on the television.

In the same way you can also connect the DVD

player with a video or DVD recorder in order to

transmit the DVD players video and audio signals

to these devices.

- 12 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Audio connection with a stereo system

3. Connect the red/white cinch cable for the

sound signal with the sound output (red/white)

on the external device.

4. To display the external image on the LCD monitors

press the button MONITOR 1/2 1(to switch the DVD

player to the AV IN mode.

Note:

Depending on the data carrier the display can

remain black for a few seconds until the DVD

players image is again displayed.

1. Switch the DVD player and your stereo system

off before making connections.

The sound of an external device connected to the

DVD players audio input will also playback if the

device is set to an operating mode other than AV.

2. Connect the jack plug of the supplied AV cable

with the AV-OUT output 3% on the DVD player.

3. Connect the red/white cinch cable for the

sound signal with a sound input (red/white) on

your stereo system.

Setting the TV standard

Press several times the button N/P eto set the television

standard for the video input. The setting will be

shown in the display.

Connecting external devices to the DVD player via

AV IN (i.e. game consol)

PAL

For video signals in the PAL television

standard.

You can playback images and sound from an external

device via the DVD player.

MULTI

NTSC

The video signal will be recognized

automatically.

For video signals in the NTSC television

standard.

7.4 Headphone connection

Important!

Only use the supplied type LXF-D103 head-

phones.

1. Connect the jack plug of the supplied AV cable

with the AV IN input 4) on the DVD player.

2. Connect the yellow cinch cable for the image

signal with the FBAS video output (yellow) on

the external device.

1. Connect the headphones jack plug with the

socket on the DVD player 3(or the LCD monitors

5@.

2. Adjust the volume before connecting to the

DVD player 3* and the LCD monitors 5^ to

a low level.

- 13 -

Download from Www.Somanuals.com. All Manuals Search And Download.

3. If headphones are connected to the DVD player

or the LCD monitors there will be no sound out-

put from the AV output 3% of the DVD player or

from the built in speakers on the LCD monitors 5).

If the LCD monitors, the DVD player and possibly

other connected devices (i.e. an audio component)

are ready for operation and are switched on and

the DVD player is connected correctly to the LCD

monitors or to a television you will now see the Sil-

verCrest logo on the TV screen.

Important!

If no disc is inserted into the player NO DISC will be

displayed on the LCD monitors.

3. Now slide the memory card into the memory

card slot 4$on the front panel of the DVD player.

Observe the following steps - depending on which

type of memory card you would like to playback.

Listening to music over long periods with

full volume on headphones can lead to

hearing damage

7.5 Setting the display position

In the event that you find the image quality of a DVD

to be insufficient, slightly swivel the display to optimize

the viewing angle.

Warning!

Always be sure to insert the memory cards

into the memory card slots as described below!

Never bend the memory cards while inserting

them into the memory cards slots!

8. Card reader and USB

connection

Slide the memory card up to the stop in the

memory card slot, with a light pressure.

8.1Inserting memory cards/USB

memory sticks with

Allow the memory card to slide in without force:

• Check to make sure that the memory card is one

that the DVD player is capable of reading.

MP3/WMA/Mpeg4/ JPEG data

Note:

Important!

The DVD-Player always starts in DVD mode.

To read memory cards press the button

USB/CARD/DVD 1@ on the remote control.

The DVD player recognizes the data formats

JPEG, MP3, WMA and MPEG4. The cards

must be in FAT 16 or FAT 32 formats, the

player can not recognize NTFS. The player

only supports 3.3V memory cards, older types

with 5V operational voltage will not be recog-

nized.

Do not attempt to insert memory cards of another

type in the memory card slot!

• Make sure that you have inserted the memory

card into the memory card slot in the correct manner.

• Under no circumstances attemt to force the memory

card into the memory card slot! Otherwise the

DVD player, memory card and the data on the

memory card could be damaged!

Proper insertion of memory cards of the type SD and

MMC into the DVD player:

1. Switch the DVD player on.

2. Make sure that the LCD monitor is ready for

operation.

Supported memory card types

Memory cards of the type SD and MMC can be

played back.

- 14 -

Download from Www.Somanuals.com. All Manuals Search And Download.

MultiMediaCard /SecureDigital memory cards

(MMC/SD)

USB memory sticks (USB)

The DVD player supports USB memory sticks 1.1

and 2.0

• Slide the USB memory stick into the USB slot 4#.

Thereby the USB symbol on the USB plug faces

upward.

Slide the MultiMediaCard/SecureDigital memory

card straight and with the contacts in front into the

memory card slot 4$.

For this purpose...

- the side of the memory card that contains the

contacts must face up.

8.2 Displaying the contents of the

memory card/USB memory stick

• Press several times the button USB/CARD/DVD 1@

to display the respective memory card contents.

The currently inserted medium is shown in the

display 4&.

- the slanted corner of the memory card must be

on the left side.

Note:

Because chipsets in the USB memory cards differ,

no guarantee can be given that all USB memory

sticks will be correctly recognized.

8.3 Removal of Memory cards/USB

Memory sticks from the memory

card slot

Memory cards/USB Memory sticks should only be

removed after the memory card slot is deactivated.

Thus avoiding the possibility of damage or data

loss.

• Press the button USB/CARD/DVD 1@ to return to

the DVD mode.

• You can now remove the memory card/USB

memory stick from the memory card slot 4$.

- 15 -

Download from Www.Somanuals.com. All Manuals Search And Download.

8.4 Playback procedure for a memory 9. Use

card:

If you have correctly inserted a memory card or a

USB memory stick into the SilverCrest DVD player

and pressed the button USB/CARD/DVD 1@ on the

remote control, the player automatically recognizes

the folders and data that exist on the memory medium.

• Carry out the required connections as described

in chapter 7 and provide a power supply.

9.1 Switching the device on and off

in the standby mode

• Set the switch POWER 4! to the position ON to

switch the DVD player on.

The LCD monitors turn on and the background image

appears.

If no disc is inserted into the disc tray the notice

LOADING will appear briefly followed by the prompt

NO DISC

• To switch the device to standby mode press the

button POWER qon the remote control.

The Power LEDs 4*on the LCD monitors light up. In

this condition the device can again be switched on

via the button POWER qon the remote control.

• To switch off the DVD player altogether, set the

These will be displayed on the screen in the players

data browser and, as is described in chapter 14,

are handled in exactly the same way as a DVD/

CD medium.

switch POWER 4! to the position OFF

9.2 Display settings

• Press the button TFT-MODE 3)to access the display

settings. The settings can be accessed at any

time.

• Select with the navigation buttonsꢁꢂ1^ 1* one

of the inputs Contrast (Contrast), Hue (Hue),

Saturation (Saturation) and Sharpness (Sharp-

ness).

• With the navigation buttonsꢃꢀ3!oyou change

the value.

• To exit the settings press the button TFT-MODE 3)

again.

9.3 Setting the image format

• Set the switch SCREEN 5$ on each LCD monitor

either to 4:3 or 16:9 to set the image format of the

LCD monitors.

- 16 -

Download from Www.Somanuals.com. All Manuals Search And Download.

10. The setup menu

Exiting the setup menu

• You can exit the setup menu at any time by pressing

The DVD player has a screen menu available, in which

you can carry out image and sound settings as well as

other functions such as, for example, activation of the

child lock. When you carry out changes in the setup

menu, these changes are saved even when the device

is switched off.

the button SETUP iagain.

10.1 General Setup Page

When you access your DVD players setup menu

with the button SETUP i the menu GENERAL SETUP

PAGE appears.

• You can set the default settings at any time in the

menu PREFERENCE PAGE

• The setup menu can be accessed during play-

back. To have access to all the settings you must

be in the stop mode. To achieve this press the

button STOP t twice.

The setup menu subdivides into the following menus:

• General setup menu

• Video Setup

• Preference settings

Navigating in the menu

TV display

1. Press the button SETUP i to access the setup

menu. The main menu appears GENERAL SETUP

Here you can match the vertical and horizontal image

display to the playback device in use.

PAGE

• With the navigation buttonsꢃꢀꢁꢂ3! o 1^

1* and the button ENTER 1& you carry out all the

settings in the menu.

2. With the navigation buttonsꢃꢀ3!o select

a menu by moving the yellow highlighting under

the corresponding menu symbol.

3. With the navigation buttonsꢁꢂ1^1* select

an input in a menu by moving the yellow bar

over an input.

4. With the navigation button ꢀo change an

input in the submenu and the navigation button

ꢃ3! will take you back a menu level.

5. To confirm a selection press the button ENTER

1&.

Normal/PS

Select this setting to display broad-

casts in the usual 4:3 format on a 4:3

television set. Broadcasts in the 16:9

format will be displayed in full screen

without the distracting bars although

the side edges of the image will be

trimmed.

Display of a film in 16:9 format on

a traditional 4:3 format television.

The image is displayed with black

bars on the lower and upper edges

of the screen.

Normal/LB

Wide

This setting is recommended when

using the supplied LCD monitors or

for the output of an image on a wide-

screen television in 16:9 format

All navigation possibilities in a current menu are

displayed at the lower edge of the menu.

- 17 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Angle Mark

10.2 Video Setup Page

On some DVDs particular scenes are recorded from

various viewing angles.

• Select the input ON in order to switch to the next

viewing angle by pressing the ANGLE 2% button

during playback of the film.

• To deactivate this function select the input OFF

OSD Language

Here you set the language, in which the OSD Menu

will be displayed on the television screen.

In this menu you can set the image parameters of

the output video signal and thus align with the play-

back quality of the image on the connected picture

screens.

Closed Captions

You set this if by every playback of a DVD the subtitle

(if present) is to be automatically displayed on the

television screen.

• For this purpose set the function to ON

• If you want to activate the subtitles manually set

this function to OFF

Sharpness

Here you set the image sharpness to HIGH

MEDIUM

or LOW

The subtitles can be set, during playback, with the

SUBTITLE button 2^.

Brightness

Set with the aid of the buttons ꢃꢀ3!othe brightness.

Screen Saver

• Subsequently press the button ENTER 1&to continue.

In this menu you can activate or deactivate the

screensaver. The screensaver protects the DVD players

LCD screen or the picture tube of a connected television

set from a displayed image burning onto the screen.

To activate the screen saver set this function to ON

The screen saver will now switch on when the play-

back is stopped and no activity takes place for several

minutes.

• To switch the screen saver off set the function to

OFF

Contrast

Set with the aid of the buttons ꢃꢀ3!othe contrast.

• Subsequently press the button ENTER 1&to continue.

- 18 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Hue

SUBTITLE

Set with the aid of the buttons ꢃꢀ3!o the hue.

The further the controller is pushed to the right the

warmer the entire image becomes. On the other

hand pushed to the left the image radiates a cooler

ambience.

• Subsequently press the button ENTER 1&to continue.

Saturation

Set with the aid of the buttons ꢃꢀ3!o the colour

saturation.

• Subsequently press the button ENTER 1&to continue.

Set the sub title language here, which should be used as

standard when playing back the film.

10.3 Preference Page

DISC MENU

Set the disc menu language here, which should be used

as standard when playing back the film.

PARENTAL

Some DVDs and CDs are encoded with an encryption

signal. In this way DVDs can be divided into eight

different approval classes.

In this menu you can set the language settings for

the audio and subtitle playback as well as activate

the child lock function and set up a password for the

DVD player.

PBC

Here you can switch the playback control (Playback

Control) on or off.

With Video CDs (VCDs or S-VCDs) the button MENU

1)can be used to display the discs main menu when

the PBC function is switched on.

1. Select one of the following approval classes to

protect the playback of this media class with a

password request:

8 ADULT

7 NC 17

for adults only;

not for teenagers under 18

years of age;

AUDIO

Set the audio language here, which should be used as

standard when playing back the film.

6 R

for teenagers under 16, adult

supervision is strongly recom-

mended;

- 19 -

Download from Www.Somanuals.com. All Manuals Search And Download.

5 PGR

for teenagers under 16, adult

supervision is recommended;

adult supervision strongly

recommended; some scenes

are not suitable for children

under 12;

PASSWORD

Here you can change the preset password (136900

and enter your own password.. Only the numbers

0-9 can be used.

)

4 PG 13

1. To change the password select the input CHAN-

3 PG

adult supervision recommended;

for all age groups;

2 G.

1 KID SAF.

also suitable for small children.

Example

If a DVD was encoded with, for example,

approval class 7 or 8 and you have an

approval class setting between 1 and 6 then

a message follows and the password must be

entered.

2. Enter in the line OLD PASSWORD the valid

password with the number buttons 2) . The

highlight changes to the next line NEW PASS-

Also only parts of the DVD, that is to say

certain film scenes, may be encoded with an

approval class or various approval classes.

WORD

2. To activate the age approval select an approval

class and then enter your password with the

number buttons 2) in the password request

box that follows. The factory default password

is 136900.

3. Enter the new password with the number buttons

2). The highlighting changes to the next line

CONFIRM PWD

4. Enter the new password with the number buttons

2). The tab changes to the OK field.

3. Confirm your entry by pressing the button

ENTER 1&.

5. Press the button ENTER 1&.

The password has now been changed.

Note:

In the next menu item PASSWORD you can

change the factory default password and

enter a new password for the child lock.

In the event that you forget your password

you can use the factory default password

(136900).

DEFAULT

Here you reset the DVD player's factory default settings.

All language, image, sound and general settings will

be reset to the default settings. Exceptions to this are

the child lock and the password since it would be of

little use if your child could simply reset them.

- 20 -

Download from Www.Somanuals.com. All Manuals Search And Download.

11. Sound functions

Note:

Multisession playback is not possible, play-

back of unfinalised discs is not possible

11.1 To control the Volume

• With the buttons VOL+/- 1!, the volume control on

the device 3* or on the LCD monitors 5^ you in-

crease and/or decrease the volume.

If the LCD displays, the DVD player and possibly

other connected devices (i.e. an audio component)

are ready for operation and are switched on and

the DVD player is connected correctly to the television

you will now see the Silvercrest logo on the LCD

screens. If there is no disc in the disc tray of the

DVD player NO DISC will be shown on the television

screen.

11.2 Mute

• Press the button MUTE 3# to switch the sound off.

• To switch the sound on again press the MUTE

3#button again or press one of the buttons

VOL+/- 1!.

1. Open the disc tray by pressing the button OPEN

3$ on the top panel of the device. OPEN will

now appear in the display.

2. Place the disc in the disc tray with the inscribed

side facing up. When you insert the disc you

will feel a slight resistance, which you can over-

come with light pressure, now the disc is sitting

firmly on the spindle.

12. Playback functions

To play a disc with the DVD player:

• Switch your LCD monitors on.

• Make sure that the DVD player is ready for operation.

With this DVD player you can playback the following

With double sided discs the side that you want

to play must be facing down.

discs:

• DVD (Country code 2 or ALL)

• Video CD

• Super Video CD

• MPEG4 Discs

• DVD+R DL

• DVD-R DL

• DVD+RW

• DVD+R

3. After you have inserted the disc please close

the lid of the disc tray until it audibly locks into

place.

4. The contents of the inserted disc will now load;

this may take a few seconds. Playback of the

inserted disc begins automatically.

12.1 Playback start, stop, pause

Depending on the inserted disc it is possible that the

contents do not immediately play back, but first a

selection menu appears in the display.

• DVD-RW

• DVD-R

• CD-R

• CD-RW

• Audio CD

• MP3

• In this case select with the navigation buttons

ꢃꢀꢁꢂ3! o 1^1*the menu item, which will

start the playback of the film.

• JPEG

• To start playback of the film press the button EN-

TER 1&or the button PLAY/PAUSE r.

- 21 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Pause playback

To pause the playback:

12.2 SKIP function

(Chapter/Title forward/backward)

• During playback press the button PLAY/PAUSE r.

The prompt ꢄ appears in the display.

The display shows a freeze frame of the scene you

have just paused.

Note:

This function may not be available on all DVDs/

VCDs/S-VCDs! If you attempt to carry out func-

tions that are not available the symbol

appear in the display.

will

• To continue playback of the film press the button

PLAY/PAUSE r.

Stop playback

To stop playback, press the button STOP t.

• With the buttons SKIP ꢅ 1%forwards and SKIP

ꢆ 1#backwards you can, during playback, skip

within the film on the inserted DVD/VCD/S-VCD

to the beginning of the next chapter/title or skip

back to the previous chapter/title.

Resume function

If you stopped playback of the inserted

DVD/VCD/S-VCD by pressing the button STOP

The respectively selected chapter/title will immediately

once then the DVD player automatically saves the

position, at which you stopped the playback. This

function is called "Resume function".

play back without you having to press the PLAY/PAUSE

button.

12.3 Search forward/backwards

• Press the button FFꢇ y or FRꢈ 2*,during play-

back, to start a search forwards/backwards.

• Press the button FFꢇ y or FRꢈ 2* several times

to apply the following search speeds:

The display will show PRESS PLAY KEY TO CONTINUE

• As soon as you press the PLAY/PAUSE r button

again playback will continue from the saved

position.

• If you press the button STOP t a second time,

the saved position, at which you stopped play-

back is deleted.

Note:

During the search no sound will play.

• To continue playback of the film at normal speed

from the selected position, during the search,

press the button PLAY/PAUSE r twice.

• As soon as you press the button PLAY/PAUSE

again playback of the inserted DVD/VCD/S-VCD

starts from the beginning.

- 22 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Note:

• Press the button ZOOM 2$ several times to apply

the following enlargement and/or reduction:

With playback of MPEG4 files the speed of

search forward and search backwards can be

limited. This is data dependent and not a device

malfunction.

With the navigation buttons ꢃꢀꢁꢂ3! o 1^1*

12.4 Slow motion function

the enlargement section can be shunted.

(DVD, VCD, S-VCD and DivX only)

• Press the button SLOW 1$ to set playback to slow

motion. Press the button SLOW 1$ several times to

apply the following slow motion speeds:

12.6 Viewing angle (DVD only)

Note:

This function may not be available on all DVDs/

VCDs/S-VCDs! If you attempt to carry out func-

tions that are not available the symbol

appear in the display.

will

Many films on DVD contain chapters, which were re-

corded from different viewing angles simultaneously.

Films that have such chapters available allow you to

observe these chapters from various perspectives.

• For this, during playback of the inserted DVD,

press the button ANGLE 2% on the remote control.

Each press of the ANGLE 2% button will switch to

one of the available viewing angles.

Note:

During slow motion playback no sound will be

played.

• To continue playback at normal speed, during

slow motion playback press the button

PLAY/PAUSE r.

Note:

12.7 Repeat function for DVDs, VCDs,

S-VCDs and Audio CDs

With the repeat function you can…

... in the case of DVDs, selectively repeat title,

chapter or the entire DVD.

With VCDs, S-VCDs and MPEG4 files slow

motion backwards is not supported.

12.5 Image enlargement (Zoom)

... in the case of VCDs/S-VCDs individual titles

and/or the entire VCD/S-VCD repeatedly

playback.

... in the case of audio CDs, playback repeatedly

a particular track and/or the entire CD.

Note:

This function may not be available on all

DVDs/VCDs/S-VCDs! If you attempt to carry out

functions that are not available the symbol

will appear in the display.

During playback of an inserted DVD/VCD/S-VCD

you can enlarge and reduce the image on the television

screen in three stages.

- 23 -

Download from Www.Somanuals.com. All Manuals Search And Download.

To switch on repeat playback...

• Press several times, during playback, the button

REPEAT u.

• Press the button A – B 2( again as soon as the

end of the desired sequence is reached. With

this, bear in mind that the beginning and end of

the sequence must fall within the same chapter.

On the television screen the repeat symbol

The repeat symbol

appears in the display with

one of the following notifications:

CHAPTER

Select CHAPTER to continuously repeat

appears with the notice AB.

the current playback chapter until

playback repeat is switched off or

playback is stopped by pressing the

button STOP t twice.

Select TITLE to continuously repeat the

current playback title until playback

repeat is switched off or playback is

stopped by pressing the button STOP

ttwice.

Select ALL to continuously repeat all

available titles on the disc, thus the

entire disc, until playback repeat is

switched off or playback is stopped

by pressing the button STOP t twice.

To switch off repeat playback press

the button REPEAT u several times

during playback until no more notifi-

cations appear in the display.

Repeat playback of the selected sequence begins

immediately without having to press the PLAY/PAUSE

rbutton. The sequence will continuously repeat until

you press the button A – B 2( again to switch off the

function.

TITLE

12.9 Direct title/track selection

To select a title/track on the disc directly, during

playback, enter the title/track number via the number

buttons 2).

If there are more than 9 titles press the button 10+ 2!

and then enter the corresponding title/track number.

ALL

Example:

No Display

Press the button 10+ 2! and enter the number

"2" to playback the title/track number 12.

If there are more than 19 title/tracks you must press

the button 10+ 2!twice and enter the next number

or press the button 10+ 2!twice and enter the number

"2" to playback track/title 22.

12.8 Repeat sequence (A – B)

With this function you can repeat playback of a

favourite sequence within a chapter of the current

playback disc.

To do this …

• During playback press the button A – B 2( as

soon as the start of the desired sequence is reached.

On the television screen the repeat symbol

appears with the notice

- 24 -

Download from Www.Somanuals.com. All Manuals Search And Download.

12.10 Direct chapter, title or time

selection via the search function

DVD

T C

Enter here a chapter number from

where playback should start.

Enter here a time position for the

current played back title, from

where playback should start.

Note:

TITLE TIME

This function may not be available on all DVDs/

VCDs/S-VCDs! If you attempt to carry out func-

tions that are not available the symbol

appear in the display.

will

CHAPTER

TIME

Enter here a time position for the

current playback chapter, from

where playback should start.

If you do not want to playback the entire disc you

can select a particular chapter/time position.

• For this press, during playback, the button GOTO

2@ several times to superimpose the following

displays one after the other:

CD/VCD/SVCD

DISC GOTO

Enter here a time position on the

disc from where playback should

start.

TRACK GOTO

Enter here a time position for the

current playback title from where

playback should start.

T:- -

Enter here a title number from

where playback should start.

DivX and MPEG CD

SELECT

Enter here a title number on the

disc from where playback should

start.

GOTO

Enter here a time position for the

current playback title from where

playback should start.

- 25 -

Download from Www.Somanuals.com. All Manuals Search And Download.

13. Display functions

• the remaining time of the chapter in hours, seconds

and minutes (CHAPTER REMAIN

)

13.1 Display disc information

With VCDs/S-VCDs/DivX/MPEG CDs

• the played back so far time of the current play-

back title on the CD in minutes and seconds

• the remaining time of the current playback title

on the CD in minutes and seconds

Note:

This function may not be available on all DVDs/

VCDs/S-VCDs! If you attempt to carry out func-

tions that are not available the symbol

appear in the display.

will

For audio CDs:

• the current title number/the total number of titles

• the played back so far time of the current play-

back title on the CD in minutes and seconds (SZ

With this function you can superimpose all the avai-

lable information from a DVD/VCD/S-VCD inserted

into the DVD player onto the television screen during

playback.

• During playback press the button DISP w several

times to superimpose, one after the other, the

following information:

)

• the remaining time of the current playback title in

minutes and seconds (TR

• the total played back time of the CD in minutes

and seconds (DZ

• the remaining time of the CD in minutes and

seconds (DR

)

Fading out disc information

• To fade out the disc information press the button

DISP w again.

13.2 Accessing the DVD menu

Note:

This function may not be available on all DVDs/

VCDs/S-VCDs! If you attempt to carry out func-

tions that are not available the symbol

appear in the display.

will

With DVDs:

With many films on DVD there is a main menu on

the disc that apart from the option of playing the

main film enables you, for example...

• to choose the language for subtitles and film dialogue

• to select direct from chapters

• the current title number/the total number of titles

• the current chapter number/total number of chapters

• the played back so far time in hours, minutes and

seconds (TIME ELAPSED

)

• the remaining time of the title in hours, seconds

and minutes (TIME REMAIN

• the played back so far time of the chapter in hours,

minutes and seconds (CHAPTER ELAPSED

• to playback the films bonus material (Background

information, "Making of" etc.)

)

- 26 -

Download from Www.Somanuals.com. All Manuals Search And Download.

If such a menu is present on the DVD that is inserted

into the DVD player then you can access it, during

playback, by pressing the button MENU 1).

13.4 Superimpose and fade out subtitles

(DVDs/VCDs/S-VCDs only)

• You select particular menu items by pressing the

navigation buttons ꢃꢀꢁꢂ3! o 1^1*; to con-

firm the selected menu item press …

Note:

This function may not be available on all DVDs/

VCDs/S-VCDs! If you attempt to carry out func-

tions that are not available the symbol

appear in the display.

will

• the button PLAY/PAUSE

• the button ENTER 1&.

To return to playback press the button MENU 1)

In the event that the film on the inserted

again.

DVD/VCD/S-VCD has subtitles available then you

can superimpose these on the television screen du-

ring playback by pressing the button SUBTITLE 2^.

• With the first press of the button SUBTITLE 2^ the

subtitle of the first available language will be

superimposed on the television screen.

• With each further press of the button SUBTITLE 2^

the subtitles in subsequent available languages,

one after the other, will be superimposed on the

television screen.

Note:

If you cancel playback by pressing the button

STOP t twice (Playback stop without resume

function) activation of the main menu on the

disc is not possible.

13.3 Playback Control (PBC) with

VCDs/S-VCDs

Many VCDs/S-VCDs have Playback Control (in short

"PBC"). Playback control means a main menu, which

allows for operation of several functions of the VCD/

S-VCD.

The number of the currently superimposed sub title

language will be superimposed on the television

screen ( i.e. "1/10" for the first of ten available

subtitle languages).

If PBC is available on the disc inserted into the DVD

player then you must first activate it in order to

superimpose the menu.

• When the last of the available subtitle languages

is superimposed (i.e. "10/10" for the tenth of ten

available subtitle languages) then you can switch

off the subtitle function by pressing the button

SUBTITLE 2^ again. OFF will be superimposed on

the television screen.

To activate PBC...

• During playback or when playback is stopped

press the button MENU 1). In the display the notice

PBC OFF appears.

• Press the button MENU 1) again. In the display

the notice PBC ON appears. PBC is now switched

on and the main menu on the disc can be acces-

sed with the buttons MENU 1) or TITLE 3@.

Note:

If you switch on PBC during playback then it

is possible that playback will stop and start

again from the beginning and/or with the

main menu.

- 27 -

Download from Www.Somanuals.com. All Manuals Search And Download.

13.5 Changing the playback language

1. Enter with the number buttons 2) the number of

the title, which shall be played back first.

The upper line will now show the chapters available

in this title (CH:).

2. Enter with the number buttons 2) the number of

the chapter that shall be played back. The high-

lighting moves to the programme position 2.

3. Select with the navigation buttons ꢃꢀꢁꢂ

3! o 1^1*further programme positions and

enter the title and chapter number for these

programme positions.

Note:

This function may not be available on all DVDs/

VCDs/S-VCDs! If you attempt to carry out func-

tions that are not available the symbol

appear in the display.

will

• With many films on DVD/VCD/S-VCD you can

select another playback language, during play-

back, by pressing the button AUDIO 2&.

• With the first press of the AUDIO 2& button the first

available playback language will be switched

on. With each further press of the AUDIO 2& but-

ton other available playback languages will be

switched on one after the other.

• To show the next 10 programme positions select

with the navigation buttons ꢃꢀꢁꢂ3! o 1^

1* the field ꢅ and press the button ENTER 1&.

You can allocate up to 20 programme positions.

• To delete entries in a programme select the pro-

gramme position and press the button ENTER 1&.

• To cancel the programming function select the

field EXIT and press the button ENTER 1&. All allo-

cated programme positions are deleted.

4. Start playback of the programme position by

selecting the field START and pressing the but-

ton ENTER 1&.

The currently switched on playback language will

be superimposed on the television screen.

13.6 Programming function

You can programme a playback sequence for the

titles and chapters that are available on the DVD,

VCD, S-VCD disc.

For this, during playback, you press the button PRO-

GRAMME 2# to superimpose the following window:

During the programmed playback the notice PRO-

GRAMME appears in the display.

The programme list will be deleted as soon as you

press the STOP t button.

Programming window

The upper line shows the total number of titles (TT:

)

available on the disc.

Under this the programme positions 1-10 are listed,

programme position 1 is highlighted.

- 28 -

Download from Www.Somanuals.com. All Manuals Search And Download.

14 Display of MP3/

WMA/JPEG/AVI/

• The data will be listed on the left (Data window).

Folders will be depicted with the symbol

• To superimpose the folders available on the disc

press the button PROGRAMME 2# several times un-

til the notice FOLDER appears at the bottom of

the display.

• Press the button PROGRAMME 2#again.

Folders will now be faded out and all data on the

disc is represented in a list.

MPEG and DivX data

• Insert a storage medium into the DVD player.

The contents of the data medium will be shown on

the display:

Display of MP3 data

• The area on the right is intended for the previewing

of JPEG images. A preview appears as soon as

you highlight a JPEG data in the data window.

• At the bottom is located the information bar, in

which is displayed the image size (JPEG Image)

as well as the medium (DISC, USB or

SD/MMC), on which the data is located.

• Select a data with the help of the navigation

buttons ꢃꢀꢁꢂ3! o 1^1*. By pressing the

button ENTER 1& you confirm your selection. The

data will be played back and/or the JPEG Photo

displayed.

Display of JPEG data

1. To open a folder, select the folder and press the

button ENTER 1&. The contents of the folder will

be listed.

2. To reach a higher folder level select the symbol

with the entry ".." and press the button

ENTER 1&.

Display of AVI, MPEG and DivX data

- 29 -

Download from Www.Somanuals.com. All Manuals Search And Download.

15. Playback of MP3/

WMA/MPEG and

DivX discs

15.1 Repeat function with MP3/WMA/

MPEG/JPEG/DivX discs

During playback press the button REPEAT u several

times to apply the following repeat functions (the set

function appears in the display):

• Select a data with the help of the navigation but-

tons ꢃꢀꢁꢂ3! o 1^1*. By pressing the but-

ton ENTER 1&you confirm your selection. Playback

starts immediately.

With the playback of music or video data the following

functions can be used:

REPEAT1

Endless repeat of the current

title/image.

REPEAT

FOLDER

Repeat the current folder.

REPEAT ALL Repeat all folders.

SHUFFLE

RANDOM

Random playback of all titles/images.

Play/Pause

See "12 Playback functions"

Random playback of all titles/images

whereby each title/image will played

back only once.

One time playback of the current title/

image (Repeat function off).

Stop

SINGLE

See "12 Playback functions"

Skip

See "12 Playback functions"

15.2 Replay of JPEG discs

• Highlight with the navigation buttons ꢁꢂ1^1*

an image and press the button ENTER 1& or

PLAY/PAUSE rto open the image.

See "12 Playback functions"

Slow (with MPEG and DivX data only)

See "12 Playback functions"

The image is shown on the display

Subsequently change the view to the next available

image on the disc/in the folder.

Zoom (with JPEG, MPEG and DivX data only)

See "12 Playback functions"

• To show the currently displayed image longer

press the button PLAY/PAUSE r.

• To continue the playback press the button

PLAY/PAUSE ragain.

AB Repeat

See "12 Playback functions"

• You can access an image direct by entering the

data number of the image with the number buttons

2) and subsequently confirm with the button

ENTER 1&.

• With the navigation buttons ꢃꢀꢁꢂ3! o 1^

1* you can, during playback, rotate the image in

90° steps.

- 30 -

Download from Www.Somanuals.com. All Manuals Search And Download.

• During playback press the button STOP tto display

a miniature view of all the images in the folder/

on the disc. 12 miniatures will be displayed on

each page.

16. Playback of

USB/SD/MMC data

mediums

16.1 Compatible data mediums

With your device you can playback MP3/WMA/

JPEG/AVI/MPEG/DivX data from USB data mediums

(Universal Serial Bus = universal interface for data

transfer) like, for example, a USB Stick or Flash

memory card in the SD/MMC formats.

Note:

Due to the vast number of available storage

mediums there can be no guarantee of com-

patibility with all current and future storage

mediums. Do NOT connect to the device any

hard discs that are equipped with a USB

connection! This can result in the loss of data!

• Select with the navigation buttons ꢃꢀꢁꢂ3!

o 1^1*an image and start playback with ENTER

1& or PLAY/PAUSE r.

• Select with the navigation buttons ꢃꢀꢁꢂ3!

o 1^1*one of the following entries of the lower

display line and confirm with ENTER 1&:

16.2 Using USB/SD/MMC data medi-

ums

1. Plug the USB plug of the USB data medium in

the USB connection 4#of the DVD player and/or

an SD/MMC-card in the slot for SD/MMC

cards 4$ as described in chapter 8.

2. Press the button USB/CARD/DVD 1@ several times

until at the bottom in the display 4& the notice

"USB" and/or CARD appears.

Slide Show

Starts a slide show of the images in

the folder/on the disc

Shows the available button functions

for JPEG playback. Press the button

ENTER 1& until this view has faded

out.

Prev changes to the previous page

changes to the next page

• Press the button MENU 1) to change back to the

The playback of MP3/WMA/AVI/MPEG/JPEG/

DivX data is exactely the same as playback from

a disc.

data list again.

• To switch back to the disc playback again press

the button USB/CARD/DVD 1@several times until at

the bottom in the display 4&the notice DISC appe-

ars.

- 31 -

Download from Www.Somanuals.com. All Manuals Search And Download.

17. Cleaning of the DVD

player

18. Disposal

• Clean the housing of the DVD player exclusively

with a soft damp cloth and a mild washing-up

liquid. When cleaning make sure that no moisture

gets into the DVD player!

• If necessary, clean the inside of the disc tray ex-

clusively with a clean dry brush (i.e.a lens brush,

obtainable from a photographic dealer). Never

use anything wet to clean the inside of the disc

tray!

Do not dispose of the appliance in your

normal domestic waste.

Dispose of the appliance through an approved di-

sposal centre or at your community waste facility.

• Observe the currently valid regulations In case of

doubt please contact your local waste disposal

centre.

18.2 Disposing of batteries!

Warning!

• Batteries should not be disposed of with house-

hold waste. Every consumer is obliged by law

to deposit all batteries at a collecting point of

his community/his precinct or to return them to

a shop.

Moisture penetrating into the DVD player

creates the risk of an electric shock! Besides

which, moisture can cause irreparable damage

to the DVD player!

This obligation is intended to ensure that batteries

are disposed of in an environmentally safe fashion.

Only dispose of batteries when they are fully discharged.

- 32 -

Download from Www.Somanuals.com. All Manuals Search And Download.

19. Troubleshooting

Check to see that the television standard,

which you set with the N/P button matches the

connection variation, with which you have con-

nected the DVD player to a television (or video

projector) .

Check by means of the televisions (or Video

projectors) operating instructions to see if set-

tings to the television (or Video projector) may

be necessary in order to use the DVD player

with the television.

Display is blank/DVD player shows no functions

even though it is switched on

Check whether the power supply unit is properly

plugged into the socket.

Check to see that the socket, into which you

have plugged the power supply unit of the DVD

player is supplying electricity by plugging in

another device. If necessary, plug the power

supply unit of the DVD player into another socket.

Switch off the DVD player with the POWER

switch and then wait ten seconds. Subsequently

switch the DVD player on again.

No sound

Check to see if the DVD player is possibly switched

to mute (MUTE button).

Check to see that all connecting cables between

the DVD player and potentially connected audio

components are firmly plugged into the corre-

sponding sockets

Display shows "No Disc" even though a disc is

inserted

The disc is dirty, scratched or damaged. Clean

the disc or insert another disc.

Check to see if you have reduced the volume

on the LCD monitors

Check by means of the televisions operating in-

structions to see if settings to the television may

be necessary in order to use the DVD player

with the television.

The Country/Region code on the inserted

DVD/VCD/S-VCD does not correspond to the

Country/Region code of the DVD player. In this

case the DVD/VCD/S-VCD cannot be played

with the DVD player.

Check by means of the operating instructions

for a potential connected audio component if

settings to it are necessary in order to use it

with the DVD player.

Inserted disc will not playback

• A film of condensation may have formed on the

laser sensor lens of the DVD player. In particular

this may occur if the DVD player has been subjected

to large temperature fluctuations.

No 4:3 or 16:9 image

If this is the case place the DVD player in a dry envi-

ronment at normal room temperature. First remove

any disc that may be inserted into the disc tray. Then

leave the DVD player switched off for at least one

hour without using until the condensation film has

evaporated.

Check by means of the televisions operating

instructions, which image formats the television

has at its disposal.

Check to see if the settings in the OSD menu

match the available image format of the television.

No image or black/white image only

Check to make sure that all connection cables

between the DVD player and the LCD monitors

(or other devices) are firmly inserted into the

corresponding sockets

- 33 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote control not functioning

Contact one of our service partners in your area if …

• the stated function defect can not be resolved as

described or

Check whether the remote control battery is

inserted into the battery compartment with the

correct polarity.

• other functional defects arise.

Check to see if the remote control battery is

depleted and, if necessary change the battery.

Make sure that there are no obstacles located

between the remote control and the DVD player.

Be situated no more than five meters from the

DVD player when using the remote control.

For this see chapter 21 "Warranty and

service".

20. Glossary / Key Word

Index

Playback language/ Subtitle language do not

correspond to the settings in the OSD menu

The playback language/Subtitle language setting in

the OSD menu is not available on the inserted disc.

20.1 What are DVDs, VCDs and

S-VCDs?

One or several functions can not be switched on

The selected function may not be available on all

DVDs/VCDs/S-VCDs! If you attempt to carry out a

DVDs

DVD is the abbreviation for "Digital Versatile Disc".

DVDs are a storage medium for audio and video

data; they are available in 8 cm and 12 cm (Diameter)

formats. Because of the much higher storage capacity

as compared to CD-Rs/CD-RWs DVDs can provide

a playback duration of up to eight hours for the audio

and video data stored on them.

function that is not available the symbol

appear in the display.

will

None of the buttons on the appliance or on the

remote control are functioning/other malfunctions

Switch off the DVD player with the POWER

switch and then wait ten seconds. Subsequently

switch the DVD player on again.

VCDs/S-VCDs

If the malfunction is still present: Reset the DVD

player to its default settings.

"Video CD" (VCD) and "Super Video CD" (S-VCD)

are designations for two processes of compressed

storage, thus space saving, of films on CDs. VCDs

and S-VCDs are available in 8 cm and 12 cm (Dia-

meter) formats. Their storage capacity is a great

deal lower than that of DVDs. For this reason they

only offer a playback duration, for the saved audio

and video data on them, of 20 minutes (8 cm format)

and/or 74 minutes (12 cm format).

VCDs are available in two versions:

• With version 1.1 VCDs/S-VCDs only audio and

video data can be played back.

• With version 2.0 VCDs/S-VCDs, PBC (Playback

Control) functions are available. In addition still

images can be played back in a higher resolution.

- 34 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback Control (PBC)

The deepest sounds are fed to a bass loudspeaker,

the so called "Subwoofer". The subwoofer can be

placed in any desired location in the room; the logic

for this is that the bass sounds that the subwoofer

puts out can scarcely be localized exactely by the

human ear

Version 2.0 VCDs/S-VCDs have Playback Control

(in short "PBC") at their disposal. Then on the

VCD/S-VCD a main menu is available, by which

various functions of the VCD/S-VCD are allowed

to be operated.

20.2 What are Title and Chapter?

Title is the name given to the largest units of image

and sound units on DVDs; on many DVDs the (Main)

film has the title number 01. For bonus material (i.e.

Film trailer, background information etc.), that is

available on many DVDs, other possible title numbers

can be used.

Dolby Digital (5.1)

Dolby Digital, also designated as AC3, is a digital

sound format, by which up to six seperate audio

channels can be transported. With most of the current

DVDs, the sound is stored in the so called "Dolby

Digital 5.1" format; the "5" in the title "5.1" stands

for three front and two rear surround sound channels,

the "1" for the bass sound chanel.

Chapter is the name given to the next smaller image

and sound units beneath title. If the DVD/VCD/S-VCD

or its title is divided into chapters, numbers are assigned

to you, through the input of which the chapter can

be selected direct.

DTS

DTS is the abbreviation for "Digital Theatre System"

and refers to one of the most common surround

sound formats for DVDs. As with Dolby Digital 5.1,

DTS uses three front and two rear surround sound

channels as well as a bass sound channel.

Bear in mind that not on all DVDs …

• are the DVD or the title divided into (numbered)

chapters

20.4 What are PAL and NTSC?

• Chapters are also designated as "Scenes" (i.e. in

the main menu of DVDs)

PAL

PAL is the abbreviation for "Phase Alternation Line".

PAL is the mid and west Europe (Exception: France,

see the heading "SECAM") customary and most

wide spread colour television standard.

20.3 Dolby Surround

Dolby Surround is an analogue sound format, by

which the two channels of a stereo sound signal are

used in order to accommodate room sound information

for further channels. With a Dolby Surround decoder

the signals are again converted into sound and/or

music and are fed to two additional loudspeakers,

which are to be situated behind the listening area.

NTSC

NTSC is the abbreviation for "National Television

System Committee". NTSC is a colour television stan-

dard that is primarily used in the USA and Japan.

Dolby Prologic

20.5 MP3, WMA, JPEG, DivX and MPEG

In comparison to Dolby Surround sound format, with

Dolby Prologic an additional channel in the stereo

signal is used; this is the so called "Centre" channel.

The corresponding centre loudspeaker is to be situated

in the middle between the stereo loudspeakers.

MP3

MP3 denotes a process and/or format developed

by the Fraunhofer Institute for the compression of au-

dio data. In the MP3 format compressed music pie-

ces are only a fraction of their original size, which,

- 35 -

Download from Www.Somanuals.com. All Manuals Search And Download.

for example, on CD-Rs/CD-RWs allows for storage

of a considerably greater volume of music than on

commercially available audio CDs, on which audio

data is stored in the CDA format.

The structure of an MP3-CD can, for example, appear

as follows, if the MP3 data is stored in files:

MP3

MP3-CD

ORDNER

FOLDER

WMA

WMA ("Windows® Media Audio") is a data format

developed by Microsoft® for audio data.

JPEG

JPEG ("Joint Photographics Expert Group") denotes

a wide spread graphic format, developed by the

organization with the same name, with which image

data of the colour and grey scales are compressed.

DivX

DivX is a coding format for videos and multimedia

data, invented by the DivX Networks, Inc company.

MPEG

MPEG ("Moving Picture Experts Group") refers to

a video compression format.

20.6 What are files?

As opposed to audio CDs the title on a CD-R/CD-

RW with MP3-, WMA- or JPEG data can be stored

in files, for example, in order to file titles from different

genres.

- 36 -

Download from Www.Somanuals.com. All Manuals Search And Download.

21. Warranty and service

22. Importer

The warranty for this appliance is for 3 years from

the date of purchase. Should you have grounds for

complaint, despite our high quality standards, please

contact our Service Hotline. In the event that your

complaint cannot be resolved over the telephone,

you will receive from them

Kompernass GmbH

Burgstrasse 21

D-44867 Bochum

www.kompernass.com

• a processing number (RMA number) as well as

• an address, to which you can send your product

for warranty processing.

In the case of a mail-in shipment please enclose a

copy of the purchase receipt (sales slip). The appliance

must be securely packed and rhe RMA number clearly

visible. Shipments without an RMA number can not

be processed.

Note:

The warranty provisions cover only material

or factory defects.

The warranty provisions do not cover

• worn out parts

• damage to breakable parts like switches

or rechargeable batteries.

This product is for private use only and is not intended

for commercial use. The warranty is void in the case

of abusive and improper handling, use of force and

internal tampering not carried out by our authorized

service branch. Your statutory warranty claims are

not restricted by this warranty.

- 37 -

Download from Www.Somanuals.com. All Manuals Search And Download.

- 38 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Warranty

MOBILE DVD PLAYER

with two monitors

KH 2360

Kompernass Service Ireland

c/o Irish Connection

41 Harbour view

Howth Co. Dublin

Tel: 087-99 62 077

Fax: 18398056

e-mail: support.ie@kompernass.com

In order to guarantee a cost free

repair procedure please get in touch

with the service hotline. Make sure

you have your sales slip handy.

Sender, please write clearly:

Last name

First name

Street

City/Town

Country

Telephone

Date/Signature

Description of fault:

Download from Www.Somanuals.com. All Manuals Search And Download.

Intelligent Motion Systems Switch MDriveAC User Manual
Jenn Air Oven W122 User Manual
JVC Speaker System GVT0298 003B User Manual
Kenwood Stereo Receiver KMD PS971R User Manual
Kettler Table Top Game 07122 490 User Manual
Kichler Lighting Landscape Lighting 10962CV User Manual
Kodak Camera Accessories 8F8039A User Manual
Kodak Scanner i1310 User Manual
Konica Minolta Printer 2400W User Manual
Korg Musical Instrument Trinity User Manual