Kompernass Iron KH 2400 User Manual

UK  
KOMPERNASS GMBH · BURGSTRASSE 21 · D-44867 BOCHUM  
ID-Nr.: KH2400-06/07-V1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ƹ
³
·
¹
¸
µ
¾
º
»
¿
´
²
Download from Www.Somanuals.com. All Manuals Search And Download.  
KH2400  
Content  
Page  
Proper use  
4
4
Package Contents  
Technical Data  
4
Safety Instructions  
Parts Identification  
Before first use  
4
6
6
Controlling the temperature  
Ironing tips  
6
7
How to fill with water  
Auto shut-off safety feature  
Steam ironing  
7
7
8
Using the steam burst button  
Using the spray-button  
Anti-scale system  
8
9
9
Using the calc clean button  
Drip-stop feature  
9
10  
10  
10  
10  
11  
11  
11  
Using as a dry iron  
Care and cleaning instructions  
Emptying and storing the iron  
Disposal  
Warranty and customer service  
Importer  
Read the operating instructions carefully before using the appliance for the first time  
and preserve this booklet for later reference. Hand over the manual to anyone you  
pass on the appliance to.  
- 3 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KH2400  
Steam and dry iron KH 2400  
Safety Instructions ƽ  
ƽ Danger of Burns!  
Proper use  
• Keep the steam iron out of reach of  
children. Never permit children to use  
the steam iron.  
The steam and dry iron is intended pure-  
ly for ironing clothes in private house-  
holds. In addition, creases in hanging  
clothes, curtains, etc. can be removed  
using the vertical steam burst function.  
Do not use the appliance for any other  
than its intended use.  
• Never touch the sole-plate of the iron  
when it is hot. Take hold of the steam  
iron with the handle only.  
• Never hold your hand over the steam  
spray or on hot metal parts.  
• Never direct the steam blast at people  
or other living creatures.  
You should not open the filler opening  
of the water reservoir while the iron  
is in use. First remove the plug from  
the power socket and allow the steam  
iron to cool down before refilling it.  
Package Contents  
Steam iron  
Measuring cup  
Storage cover  
Operating instructions  
Warranty card  
ƽ Fire hazard!  
• Never leave the steam iron unattended  
when it is hot or switched on. You  
and others can be easily injured  
through a still hot iron.  
Technical Data  
• Never place the steam iron in the close  
vicinity of inflammable materials, such  
as curtains and drapes. They could  
catch fire.  
Nominal voltage:  
Nominal output:  
230 V~ 50Hz  
2200 W  
• Use only the ironing temperatures given  
in the care instructions for the material  
and those suitable for it. Otherwise,  
you could damage the textiles. Should  
care instructions for the item be neither  
known nor available, begin ironing  
with the lowest temperature setting.  
- 4 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KH2400  
Put the steam iron into storage only  
when it has cooled down completely.  
• Always unroll the power cable fully  
before switching on and do not use  
an extension cord.  
• Never touch the power cable or the  
power plug with wet hands.  
• Never place the steam iron on edges,  
for example table edges. It could tip  
and fall down.  
Stand the steam iron only on its back  
end, or lay it in the support tray provi-  
ded on the ironing board. Never lean  
the hot iron against walls or other ob-  
jects. There could be a risk of fire  
breaking out.  
• Under no circumstances should you  
submerge the steam iron in any liquid  
or permit liquids to penetrate into the  
housing of the steam iron. You should  
never expose the appliance to moisture  
or use the device outdoors. Should  
liquids penetrate into the appliance  
housing , immediately remove the plug  
from the power source and arrange  
for the appliance to be repaired by a  
qualified specialist workshop or by the  
Customer Service Department.  
ƽ Danger of electrical shock!  
• Connect the steam iron only to correctly  
installed wall power sockets.  
To avoid possible dangers, arrange for a  
defective appliance to be checked and  
possibly repaired by qualified techni-  
cians, or contact our Customer Service  
Department.  
• Arrange for defective power cables to  
be replaced immediately by qualified  
technicians, or contact our Customer  
Service Department.  
Never use the steam iron adjacent to  
water contained in a bath, shower,  
wash basin or other vessels. The proxi-  
mity of moisture presents a danger,  
even when the appliance is switched  
off.  
You may not open the housing of the  
steam iron. Arrange for a defective  
steam iron to be repaired only by a  
qualified specialist workshop or by  
the Customer Service Department.  
• Should the steam iron fall to the  
floor, become otherwise damaged, or  
the power plug or cable becomes de-  
fective, it may no longer be taken in-  
to use. In such cases, arrange for the  
appliance to be checked and possibly  
repaired by a qualified workshop or  
our Customer Service Department.  
• Do not allow individuals (including  
children) to use the appliance whose  
physical, sensorial or mental abilities  
or lack of experience and knowledge  
hinder their safe usage of it if they  
have not previously been supervised  
or instructed in its correct usage.  
To disconnect from the power source,  
pull only on the plug itself, not on the  
cable.  
• Never direct the steam jets or the water-  
spray jets at electrical appliances or at  
objects sensitive to heat or moisture.  
• Never bend (kink) or crush the power  
cable. Arrange it in such a way that it  
can not come into contact with hot  
surfaces and such that no-one can  
step on it or trip over it.  
• After every use, before cleaning and  
when refilling with water , remove  
the plug from the power socket.  
- 5 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KH2400  
Tell children about the appliance and  
its potential dangers so that they do  
not play with it.  
• Remove the storage cover, sticker or  
any protective items from the solepla-  
te ´.  
• It is important to remove any residues  
of the polishing compound, used on  
the soleplate ´, which may have lod-  
ged in the steam vents. Using the  
measuring cup supplied, pour  
water into the iron up to the MAX  
line. Clean the steam vents by using  
“Calc Clean” system. (See using the  
Calc Clean Button ). When finished,  
wipe the soleplate ´ with an old  
cloth. Cotton swabs may be used to  
clean and dry the steam vents.  
• Some parts of the iron have been  
slightly greased and as a result the  
iron may smoke slightly when swit-  
ched on for the first time. After a  
short while, however, this will cease.  
Open a window.  
ƽ Important!  
• Should the clothing care instructions  
forbid ironing, (Symbol  
), the clo-  
thing item may not be ironed. If you  
ignore this warning, the item could  
be damaged.  
• Do not fill the water tank with a li-  
quid other than water. You will other-  
wise damage the steam iron.  
You may not clean the steam iron  
with solvents, alcohol or abrasive  
cleaning agents. You could other-  
wise cause damages.  
Parts Identification  
Cable protector / mains lead  
Water tank with integrated blue  
switch-off control lamp  
Temperature control knob  
Calc-Clean button  
Sole plate  
• Normal tap water can usually be used  
for ironing. But if you live in a hard  
water area we recommend to use  
distilled water to insure  
optimum performance of your iron.  
Storage cover  
Measuring cup  
Controlling the temperature  
Spray nozzle  
Water tank lid  
µ Steam regulator  
¸ Spray button  
Turn your temperature control knob ᕣ  
to the position you desire according to  
the following fabric indications:  
¹ Steam burst button  
Ƹ Heater monitor light (green)  
Linen  
Toile  
Leinen  
Cotton  
Coton  
Baumwolle  
Silk  
Soie  
Seide  
Wool  
Laine  
Wolle  
Nylon  
Nylon  
Nylon  
Before first use  
Calc Clean  
• Before using the iron for the first  
time, check if the voltage rating on  
the base plate corresponds to the  
mains voltage in your home.  
- 6 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KH2400  
Ironing tips  
Water hardness  
Ratios - distilled  
water to mains  
Sort the articles to be ironed according  
to the fabric. Ironing instructions are  
usually stitched onto an inside seam of a  
garment and these should be followed  
at all times. Start your ironing with the  
fabrics requiring the lowest heat setting.  
If you are unsure of the fibre content of  
a garment, test a small area (a seam or  
inside hem) before ironing. When in  
doubt, start with low heat. If wrinkles  
remain, gradually increase the heat to  
find the best setting for good results  
without damaging the fabric.  
water  
0
1 : 1  
2 : 1  
3 : 1  
very soft / soft  
medium  
hard  
very hard  
The water hardness level can be queried  
at your local water works.  
Auto shut-off safety feature  
The automatic shut-off function ensures  
that the iron is automatically shut off  
after a standstill of 30 seconds in hori-  
zontal position or 8 minutes in vertical  
position.  
How to fill with water  
When the iron is automatically shut off,  
the blue shut-off indicator light in water  
tank starts to flash.  
If you move the iron gently back and  
forth, it switches on again. The green  
heater monitor light Ƹ comes on again  
when the temperature at the sole plate  
drops below the set ironing tempera-  
ture. Wait until the green heater moni-  
tor light Ƹ goes out.  
Check that the steam control gear µ is  
in the dry position (position 0) when fil-  
ling the water tank .  
Pull back the water tank lid and fill  
the tank to the “MAX” line. Do not  
overfill. Check the water level in the  
tank in the position shown.  
The iron has then reached the set iro-  
ning temperature and can now be used.  
Use only clean mains water, without any  
form of additive. Other fluids damage  
the appliance. To extend the optimal  
steam blast function, mix mains water  
with distilled water according to the  
table.  
- 7 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KH2400  
Steam ironing  
You can adjust the steam easily with the  
7 positions of the steam control gear.  
Put the iron on the heel rest when rear-  
ranging clothing or while not in use.  
Steaming stops when the iron is placed  
on the heel rest.  
Unwind the mains lead. Ensure that the  
iron is disconnected from the power sup-  
ply before you fill it with water. Turn  
steam regulator µ to the dry position (0  
position) and the temperature control  
knob to MIN.  
Fill the iron with water. Ensure that the  
MAX marking line is not exceeded. Con-  
nect the appliance to the mains power  
supply again. The blue shut-off indicator  
light in water tank comes on.  
Using the steam burst button  
Be sure there is water in the tank and  
the temperature control knob is on  
steam.  
Set the temperature control knob to  
Using the iron horizontally  
the steam position  
and the heating  
light Ƹ will illuminate. In this setting,  
the iron can be used as a steam iron  
once the heating light Ƹ goes out. The  
heating light Ƹ will illuminate and go  
out regularly during ironing as an indi-  
cation that the temperature control is  
working properly.  
Lift the iron and press the steam burst  
button ¹. You may need to press this  
button ¹ a few times after filling the  
iron with water to activate the pump.  
The burst steam facility can be used only  
when ironing at temperature of at least  
150° C, this means form III to MAX.  
Setting the knob  
Turn the steam control gear µ to the  
steam position and the iron will create  
steam. Turn the steam control gear to  
the position 0, and the steam will cease.  
Using the iron vertically  
Steam adjustable  
- 8 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KH2400  
The burst function can be also used  
when the iron is held in vertical position  
to remove creases from hanging clothes,  
curtains, etc.  
Using the calc clean button  
It is important to use the Calc-Clean  
function before putting the iron into  
operation for the first time and then at  
regular intervals in order to remove lime  
particles and other impurities. We  
recommend that the Calc-Clean function  
is used at least twice a month. In areas  
with very hard water, the iron should be  
cleaned with the Calc-Clean function  
after every use, or use distilled water.  
• Fill the water up to “MAX” line in  
water tank .  
Using the spray-button  
Provided there is sufficient water in the  
tank , you can use the spray button ¸  
at any temperature setting and when  
steam or dry ironing. While ironing,  
press the button ¸ several times to acti-  
vate the pump.  
• Insert the plug into the wall socket.  
• Set the temperature control to  
MAX.  
• Allow the iron to heat up until the  
heating light Ƹ goes out and then  
lights again.  
• Remove the plug from the wall socket.  
• Hold the iron horizontally over the sink.  
• Set the steam control gear µ to calc  
clean position (0) then press and hold  
the calc clean button . The boiling  
water and steam will drain from the  
vents in the soleplate . Impurities  
and scale will be drained away with  
the water.  
Anti-scale system  
The integrated anti-scale system reduces  
the build up of lime scale and increases  
the user life of your iron  
• Move the iron backwards and for-  
wards while draining the water.  
• Release the calc clean button once  
all water has been drained out.  
• Place the iron in the upright position,  
plug it and then allow it to heat up.  
• Carefully dry soleplate by ironing  
over a towel or old cloth to ensure  
there is no remainder of the water  
inside the steam chamber.  
• Let the iron cool down completely  
before storing it.  
- 9 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KH2400  
Drip-stop feature  
Care and cleaning instructions  
As indicated on the temperature control  
• Ensure that the soleplate remains  
smooth and unscratched by ironing  
around on not over zippers, rivets or  
any other objects which may scratch  
the soleplate.  
• The hardness of the water and its  
minerals differs widely from region to  
region. If the water in your area is  
very hard, we recommend the use of  
distilled water that is available in  
retail stores in order to ensure the  
optimum function of the iron. If you  
do not use distilled water, clean the  
iron regularly using the Calc-Clean  
function (see section “Calc-Clean  
Function”).  
knob , steam ironing  
is only possi-  
ble at higher ironing temperatures. With  
conventional steam irons, water may  
drip from the soleplate if an extremely  
low temperature has been selected.  
However, a new feature has been added  
to this iron – ‘DRIP STOP’ steam shut-off.  
This means that the iron will automati-  
cally stop steaming at low temperatures.  
When this happens, you will hear a  
“CLICK”. Then set the temperature con-  
trol to the required temperature.  
Steaming will recommence as soon as  
the required temperature has been rea-  
ched.  
• Do not disassemble or repair your iron  
yourself.  
Using as a dry iron  
• After each use, remove the plug and  
let the iron cool down. Wipe the sole-  
plate with a damp cloth and non-  
abrasive (liquid) cleaner. Clean the  
iron body with a damp cloth.  
The iron can be used as a dry iron, even  
if there is water in the water tank . Do  
not put water in the water tank when  
the iron is to be used as a dry iron for  
many hours.  
• Put the iron on the heel rest and then  
plug the iron into the mains.  
Emptying and storing the iron  
• Turn the steam control gear µ to  
“O”.  
• Set the temperature control knob ᕣ  
to the required temperature.  
• When the heating light Ƹ goes out, it  
indicates that the iron has reached  
the required temperature.  
• Slide the steam control gear µ several  
times from 0 to the steam position  
and back again (self-cleaning).  
• Be sure the iron is unplugged first.  
• Pour out any remaining water by sha-  
king the iron.  
• Make it a habit to empty the iron  
after each use.  
• Put the iron on the storage cover. Do  
not use the storage cover while iro-  
ning.  
• Wind the power cord around the cord  
winder. Do not wrap the power cable  
too tightly!  
- 10 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KH2400  
• On a stable surface, store the iron with  
storage cover in the horizontal  
position.  
• Let the iron cool down completely  
before storing.  
Importer  
KOMPERNASS GMBH  
BURGSTRASSE 21  
D-44867 BOCHUM  
Disposal  
Do not dispose of the device in  
normal domestic waste.  
Dispose of the device over a registered  
waste disposal firm or through your  
communal waste disposal facility.  
Observe the currently valid regulations.  
In case of doubt, consult your waste  
disposal facility.  
Dispose of the packaging materi-  
als in an environmentally respon-  
sible manner.  
Warranty and customer service  
The warranty conditions and service cen-  
tre address can be found in the enclosed  
warranty slip.  
- 11 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Ingersoll Rand Heat Pump 612264D User Manual
Jensen Clock Radio JCR175 User Manual
JVC Flat Panel Television rs 840UD User Manual
JVC Portable CD Player 601 600000 030 User Manual
Kenmore Clothes Dryer 1109586 User Manual
Kenmore Washer 8526119A User Manual
Kenmore Water System 6253483400 User Manual
KitchenAid Blender 35 User Manual
KitchenAid Microwave Oven KHHC2090SSS User Manual
Kodak Camera Accessories K6300 User Manual