Kodak Projector 7010 User Manual

KODAK EKTAPRO

7010/7020/9010/9020

Slide Projector

SUPPLEMENT TO THE MANUAL

©Eastman Kodak Company, 2000

Download from Www.Somanuals.com. All Manuals Search And Download.

Comments

Presentations with KODAK EKTAPRO 7010,

7020, 9010 and 9020 Slide Projectors

One of the important new features of the KODAK EKTAPRO

7010, 7020, 9010 and 9020 Slide Projectors is the integrated

dissolver for a 2-projector dissolve.

You just have to link two projectors using the KODAK

Dissolve Cable (accessory) and you can immediately run

more interesting and lively live presentations using the

infrared remote control. It is also possible to play automatic

slide shows with a fixed dissolve time. However, it is not

possible to record the IR-commands.

• Even when the two projectors are linked with the dissolve

cable, they behave like individual projectors and can also

be operated individually as usual via the keypad.

• If your SLAVE projector has a built-in timer, it must be

switched off!

• If you want to use only one projector in single mode,

simply switch off the SLAVE and use the MASTER!

Aligning the projectors

It is important to align the two slide projectors before

beginning a presentation such that both projected images

cover the same area. This is easiest using so-called aligning

slides which your AV dealer will certainly carry in stock (it

is useful to load the aligning slide in the tray

compartment 80):

Projection with a single projector

(Soft Slide Change)

If you are just presenting with a single EKTAPRO 7010,

7020, 9010 or 9020, you can fade your slides out and back in

again (e.g. by setting a dissolve time to smoothly change the

slides). This means the hard light change is avoided during

slide transport.

• Place the slide trays onto the projectors.

• Press the slide reverse transport button on both projectors.

• Focus both slides using the focus buttons on your

projectors.

The commands and notes which relate to the control of an

individual projector are marked with an *.

• Now align the projectors to project both slides on the same

area.

Projection with two projectors

• Now return both slide trays to their initial position (zero

position).

Choosing projectors (MASTER/SLAVE)

All commands for dissolving etc. are only transmitted to one

projector. This projector is called the MASTER. It passes

the commands on to the second projector which is known as

the SLAVE.

You can now begin your presentation using the remote

control.

Comment (EKTAPRO 7010, 7020, 9010 or 9020)

If it is necessary to carry out any additional adjustment

during the presentation push both transport buttons on the

“dark” projector for longer than one second. The “dark”

projector is now faded in too. Switch-off the lamp again by

pressing standby.

• You can use either the KODAK EKTAPRO 7010, 7020,

9010 or 9020 projector as a MASTER

• However, you can use all EKTAPRO models with a

P-Bus-in interface as a SLAVE!

Note: The use of all functions is only possible via

EKTAPRO IR-Remote Control! With the KODAK

EKTAPRO Cable Remote only dissolves in the default

setting (0.5 sec) can be carried out.

Sorting slides into the slide trays

Once you have decided on the order of your slides, number

them through. Then sort all the slides with uneven numbers

in sequence into the slide tray for the MASTER projector.

The slides with even numbers are sorted in order into the

slide tray for the SLAVE projector (see the table page 34).

Setting up

Putting your 2 projector dissolve system together is fast and

easy. Connect the two projectors via the P-bus-in interface to

the KODAK Dissolve Cable (accessory) as shown in the

illustration! Connect your remote control to the MASTER

projector! Switch the projectors on. Your 2 projector

dissolve system is now ready to use.

Download from Www.Somanuals.com. All Manuals Search And Download.

COMMANDS AND EFFECTS

Overview

Examples:

DISSOLVE

If you want a dissolve time of

1 s :➔ Input <810> and confirm with <*>.

5.5 s :➔ Input <855> and confirm with <*>.

0 s (Hard Cut) :➔ Input <800> and confirm

with <*>.

The following table gives and

overview of all commands and effects.

All commands with * can also be used

for projection with a single

EKTAPRO 7010, 7020, 9010 or 9020

Projector!

Basic setting

After switching on you can

immediately begin a dissolve

presentation. Dissolving takes place

with a default time of 0.5 seconds.

As soon as you press the transport

forwards button of the remote control

both slide trays go to position 1 and the

MASTER projector fades the no. 1

slide up at the specified time. If you

push the button again the first dissolve

happens: slide no. 1 is faded down in

the specified time and at the same time

slide 2 is automatically faded up. Then

the slide tray of the MASTER projector

is automatically transported one

position further and the projector is

ready for the next dissolve. The

dissolve process also functions in the

same way when you push the transport

backwards button.

Important

The dissolve time you have input is

retained until you overwrite it with a

new time (via the IR remote control).

After a reset (switching off and back on

again) the time you have input with the

IR remote control is deleted (see Basic

setting).

Function

Code

* Setting dissolve times

(Soft Slide Change in

single projection)

801 - 899

* Random Access

Fade (MASTER)

Fade (SLAVE)

0 - 160

770

707

SELECTING SLIDES

Alternate (Crossfading

without slide change)

777

As in the case of individual projection,

you can transport backwards and

forwards at will, or select slides

directly (random access). The slide

sequence is always retained and the

projector which is currently “dark” is

automatically carried to the next slide

in your presentation.

* Freeze

789

980

Independent Projector

Control Mode

Parallel Projection Mode

970

Notes:

Activate Focus for SLAVE˚ 666˚

You can interrupt a presentation if the

dissolve time is greater than one

second. If a dissolve has already

started, it can be interrupted by

pressing the forward button again at

lest 1 sec into the dissolve. The

presentation will move on to the next

slide. Continuously pressing the

forward button will interrupt each

dissolve after one second and move on

to the next.

Reactivating of the dissolve 990

mode

* Remote Security Mode

* Rest

989

999

* Auto-Timer

600 - 660

˚ Function is inactivated for

models 7010 and 9010!

Tip

• The last code input via the numerical

keypad of the IR remote control

remains stored. If the command has

to be reinput, it is only necessary to

press the <*> key.

Dissolve times with IR remote

control

You can input

dissolve times of

0 seconds(so-called

hard cut) up to a

long dissolve of

9.9 seconds in

• If you input an incorrect figure on

the numerical keypad of the IR

remote control, press clear <C>

before reinputting your figure.

increments of a

tenth of a second.

The numerical combinations of

800 ...899 on your remote control are

reserved for this. Please ensure that you

press the ENTER button <*> after

inputting the relevant combination.

Only then is the command received by

the projector and the time stored. As

soon as you press the transport button

on your remote control, the first

dissolve takes place.

Download from Www.Somanuals.com. All Manuals Search And Download.

*Random Access

Further control facilities

With the commands “Fade

MASTER”, “Fade SLAVE” and

“Alternate” you can carry out

*FREEZE (789)

You select slides in 2 projector dissolve

according to the slide number of your

presentation and not according to the

slide tray number (see the table on

page 34)!

With the Freeze command a soft

dissolve can be stopped at any time

(resp. fade in and fade out by single

projection) and in any position. The

dissolve can be continued by pressing

the forward transport key. With the

backwards transport key you can fade

back accordingly.

dissolves without a slide transport

afterwards. When a dissolve command

follows this will be carried out via

forward transport key on the next slide

and with the backward transport key on

the previous slide. Therefore it is

guaranteed, that the synchronicity will

also be maintained by individual lamp

status. The fade in and out time will be

that of the dissolve time last set.

With these commands you also can

change the lamp status of the projectors

when operated in the parallel mode

(code 970) or in the individual control

mode (code 980), whereby the new

lamp status will be kept by further

transport or soft slide changes. This

opens up interesting possibilities for

your presentation.

Of course, if the

slide you are

looking for is in the

slide tray of the

projector which is

currentlyprojecting

a slide, a dissolve is

not possible. The

Press <789> and <*> on your remote

control.

Note: Mode switch-overs cannot be

done in FREEZE. FREEZE can only be

released by pressing the standby button

or the transport buttons. If you release

FREEZE by pressing the standby

button, giving the standby command

again will not return to FREEZE but

will continue the dissolve.

slide will first be faded down and the

new slide faded up. In this case, the

screen will stay blank during the

transport period.

However, if the slide you are looking

for is in the slide tray of the projector

which is currently “dark”, it will

dissolve with the slide you are

currently projecting.

With Soft Slide Change the lamp lights

up when FREEZE is ended by pressing

the transport forwards button, and goes

dark if the transport backwards button

is pressed. No slide transport is carried

out.

Special feature: You can use the

transport buttons during the dissolve

procedure to change the direction of

dissolve more than once. Once the

dissolve procedure has finished,

however, the slide is not transported.

This only happens the next time you

press the transport button. Pressing it

again continues your presentation as

normal.

Zero compartment

If there is a slide in the zero

compartment of the slide tray, this can

be selected by entering the following:

161 for the MASTER projector;

0 for the SLAVE projector.

FADE MASTER (770)

The MASTER projector's lamp can be

faded in or faded out according to

status. By re-pressing the button the

command will be reversed.

Press <770> and <*> on your remote

control.

Note: it is not possible to dissolve

from 0 to 161 or vice versa.

FADE SLAVE (707)

Note: (EKTAPRO 7010 and 9010)

If the slide tray (SLAVE) is transported

on after a random access by pressing

the transport buttons on the projector

once or more, the previously selected

slide cannot be accessed with a

repeated random access command.

(Example: on slide 36 with RA,

transport forwards to slide 38, then

back to slide 36 with RA cannot be

done.)

The SLAVE projector's lamp can be

faded in or faded out according to

status. By repressing the button the

command will be reversed.

Further presentation features

Press <707> <*> on your remote

control.

INDIVIDUAL SLIDE

TRANSPORT OF THE TWO

PROJECTORS WITH REMOTE

CONTROL (980)

With the number combination <980>

and <*> you can control the transport

of the two projectors individually with

the remote control.

If this code is transmitted, the dissolve

mode is cancelled and the lamps of

both projectors remain on. Soft slide

change cannot be carried out in this

mode.

*ALTERNATE (Dissolve

without transport) (777)

With the Alternate command the

existing lamp status can be changed

(see chart).

Press <777> and <*> on your remote

control.

Press <980> and <*> on your remote

control.

Download from Www.Somanuals.com. All Manuals Search And Download.

Transport control on the MASTER:

The slide transport runs, as usual, via

the two transport buttons.

Transport control on the SLAVE:

The slide transport is via the two focus

buttons.

It is therefore not possible to focus the

two projectors with this setting!

Access to individual slides (RA

control) is still possible (see *Random

Access).

hitches” can occur if the presenter

presses the wrong button on the remote

control by accident.

*AUTOTIMER (600...660)

A Timer function can also be set via the

IR remote control. This is particularly

relevant for the EKTAPRO 7010/7020

as this does not have a built-in timer.

Any time from 1 to 6 seconds can be

set (in steps of one second). If you

transmit such a command to the

MASTER projector, the first transport

command or the first dissolve is carried

out immediately. This is a check for

you that the projector is now in

With the security setting you can set up

your remote control so that when the

transport button is pressed, only one

transport step or only one dissolve is

executed. The focus buttons are also

disabled so that if you happen to press

the buttons, the focus on the projector

is not changed. All other functions

remain active (and can be secured by

the cover on the remote control). Even

novice presenters can now “not put a

foot wrong”!

PARELLEL PROJECTION

(970)

You can also program parallel

autotimer mode.

Example

projections via your remote control.

Press <970> and <*>.

Both projectors will then move to the

same slide tray setting and both lamps

are switched on.

You want a dissolve to take place every

22 seconds:

➔ Press <622> and <*> on your

remote control.

The slide tray goes to position 1 and the

first picture with the dissolve time is

faded up. The first dissolve occurs after

22 seconds.

This is how to put your remote control

into the security position:

Press (989) and <*>.

The following functions are changed:

• Transport forwards:

Regardless of how long you press a

button, the projector only carries out

a single transport step or the next

dissolve. In case the parallel mode is

activated the slides will only be

projected if the button is released.

Focussing:

MASTER: With the focus buttons.

SLAVE: First press <666> and <*>,

then use focus buttons (not possible

with models 7010 and 9010!).

With a next slide transport this

command is inactive again.

The slides are numbered from 1 - 80

(or 1 - 140 on a 140 slide tray) in this

parallel mode and can be selected as

such. If, for example, no. 13 is selected,

both projectors will go into search

mode and project the slides in the slide

tray slot no. 13.

Important

Whilst the MASTER projector is

carrying out a slide transport, no

commands should be sent with the IR

remote control. This can lead to the

command not being recognized,

especially in the case of very short

autotimer times. In this case the

projector should be switched off- and

on again.

• Transport backwards:

Hold down the button for at least two

seconds. The projector carries out a

single step backwards and the slide

will be projected in the moment the

button is released.

• Focus:

Inactive

Note:

Switching the autotimer off

You can turn the autotimer off again at

any time:

Press <600> and <*> on your remote

control.

• Of course the security position can

also be used to control projection

with a single projector.

BACK INTO DISSOLVE MODE

(990)

By inputting this combination of

numbers and the <*> you can go back

to a basic setting for the two projector

dissolve. The dissolve time previously

set is retained.

• For the individual projector control

(980) this command cannot be

applied.

To cancel the security setting:

The presentation mode can only be

cancelled by a reset command or by

switching the projectors off and on

again [see *RESET (999)].

Press <990> and <*> on your remote

control.

*SECURITY SETTING FOR

PRESENTATIONS USING IR

REMOTE CONTROL (989)

If all the

Press (999) and <*>.

*RESET (999)

preparations for a

presentation have

been made, it is

important for a

presentation to run

“smoothly”. In

spite of the best

When you input this command, the two

projectors are automatically reset to

their zero position. Reset is the same as

switching the projectors off and back

on again (see also Basic setting).

Press <999> and <*> on your remote

control.

preparation “small

Download from Www.Somanuals.com. All Manuals Search And Download.

Slide Sorter Aid

Position

MASTER

tray

Position

MASTER

tray

Position

MASTER

tray

Position

in SLAVE

tray

Position

in SLAVE

tray

Position

in SLAVE

tray

Position

in SLAVE

tray

Slide

No.

Slide

No.

Slide

No.

Slide

No.

MASTER

tray

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

Download from Www.Somanuals.com. All Manuals Search And Download.

Invacare Personal Lift 5143 User Manual
JBL Car Speaker 28T 60 User Manual
JBL Portable Speaker FLIPIIBLK User Manual
Jensen Handheld TV JDTV 1020 User Manual
JVC Stereo Receiver RX 7001PGD User Manual
Keating Of Chicago Fryer 14 TS User Manual
Keys Fitness Fitness Equipment ST 205 User Manual
Kidde Smoke Alarm KN COPP B LS User Manual
Kolcraft Stroller S67 T R1 User Manual
Konftel Printer G510 7276 00 User Manual