Remote Control Software
HELIX DN9848E
Remote Control Software V4.01
User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
HELIX DN9848E Remote Control Software
User Guide
CONTENTS
1
2
INTRODUCING THE HELIX DN9848E REMOTE CONTROL SOFTWARE........................... 6
INSTALLING THE HELIX DN9848E RCS ADD-IN ................................................. 7
Minimum System Requirements...................................................................................... 7
Software Installation..................................................................................................... 8
2.1
2.2
3
GETTING STARTED .....................................................................................10
Opening HELIX DN9848E RCS within the ELGAR Library Manager .......................................10
Using the Screens........................................................................................................13
3.1
3.2
3.2.1
3.2.2
Overview of FastNav® menus................................................................................. 13
Navigation........................................................................................................... 14
Tool tips.............................................................................................................. 14
Using the on-screen controls.................................................................................. 14
Changing a name ................................................................................................. 16
3.2.3
3.2.4
3.2.5
3.3
The HELIX DN9848E RCS Workspace..............................................................................17
3.3.1
FastNav® unit bar................................................................................................. 18
Quick Tour of the HELIX DN9848E RCS Menu Screens.......................................................19
3.4
3.4.1
3.4.2
Memory View screens ........................................................................................... 20
Copy Channel View screen..................................................................................... 23
DN9848E Units Home screen.................................................................................. 25
Input Groups screen ............................................................................................. 26
Output Groups screen ........................................................................................... 27
3.4.3
3.4.4
3.4.5
3.5
3.5.1
3.5.2
3.5.3
Working Online ...........................................................................................................28
Communications Overview..................................................................................... 28
Online Operation .................................................................................................. 29
Troubleshooting ................................................................................................... 31
3.6
Protecting System Settings ...........................................................................................32
3.6.1
3.6.2
Panel Locks ......................................................................................................... 32
System Protect .................................................................................................... 33
4
INPUT CHANNELS .......................................................................................34
Input Channel Control Panel..........................................................................................34
PEQ and Protection Screens ..........................................................................................35
Setting Input Parameters..............................................................................................36
4.1
4.2
4.3
4.3.1
4.3.2
Naming an Input Channel...................................................................................... 36
Gain and Delay .................................................................................................... 36
Parametric equalization (PEQ) ................................................................................ 37
Compression (channel protection)........................................................................... 37
4.3.3
4.3.4
3
Download from Www.Somanuals.com. All Manuals Search And Download.
HELIX DN9848E Remote Control Software
User Guide
4.4
4.4.1
4.4.2
4.4.3
Monitoring the Input Signals .........................................................................................38
Meters - peak ...................................................................................................... 38
Meters – gain reduction......................................................................................... 38
Input Response graph........................................................................................... 39
5
OUTPUT CHANNELS.....................................................................................40
Output Channel Control Panel........................................................................................40
Filters, PEQ and Dyn. Screens .......................................................................................41
Setting Output Parameters............................................................................................42
5.1
5.2
5.3
5.3.1
5.3.2
Naming an Output Channel.................................................................................... 42
Routing Page ....................................................................................................... 42
Signal Invert, Delay and Output Level ..................................................................... 44
Phase Adjustment (Filters Screen) .......................................................................... 45
High Pass and Low Pass Filters (Filters Screen)......................................................... 47
Parametric Equalisation (PEQ Screen)...................................................................... 49
Compression (Dyn. Screen) ................................................................................... 51
Output Limiter (Dyn. Screen) ................................................................................. 52
5.3.3
5.3.4
5.3.5
5.3.6
5.3.7
5.3.8
5.4
5.4.1
5.4.2
5.4.3
Monitoring the Output Signals .......................................................................................53
Meters - peak ...................................................................................................... 53
Meters – gain reduction......................................................................................... 53
Output Response graph......................................................................................... 53
5.5
Output Muting on Selected Unit .....................................................................................54
6
7
CONFIGURING A HELIX DN9848E UNIT ..........................................................55
General......................................................................................................................55
Unit and Memory Identification......................................................................................56
Display Delay Options ..................................................................................................57
Knob Mouse Direction ..................................................................................................58
PEQ Bandwidth or Q Selection .......................................................................................59
6.1
6.2
6.3
6.4
6.5
PROGRAMMING EQ.....................................................................................60
Parametric Equalisation (PEQ) .......................................................................................60
Dynamics...................................................................................................................62
Filters........................................................................................................................63
7.1
7.2
7.3
8
9
WORKING WITH MULTIPLE HELIX ADD-INS .......................................................64
Building your Network Remotely....................................................................................64
The DN9848 Units Home Screen....................................................................................64
8.1
8.2
STORING/RECALLING MEMORY SETTINGS ..........................................................67
Using Working Memories ..............................................................................................67
Unit (Device) Memories................................................................................................69
Copy RCS Memories.....................................................................................................71
9.1
9.2
9.3
4
Download from Www.Somanuals.com. All Manuals Search And Download.
HELIX DN9848E Remote Control Software
User Guide
10 MANAGING GROUPS....................................................................................72
10.1
10.2
10.3
Security – Grouping Password....................................................................................72
Input Groups ...........................................................................................................74
Output Groups .........................................................................................................78
11 USING HELIX DN9848E RCS TO CONTROL A PROCESSING SYSTEM .........................82
11.1
11.2
Overview.................................................................................................................82
HELIX DN9848E unit interconnections..........................................................................82
Connecting the HELIX DN9848E units using the two-port switch............................... 82
Connecting the HELIX DN9848E units to an Ethernet switch or hub........................... 83
Ethernet Connection .................................................................................................83
Ethernet connection – standard........................................................................... 83
Ethernet connection – wireless option................................................................... 84
Configuring the Network Devices ......................................................................... 84
Fault Finding Tips .............................................................................................. 91
Serial Connection (Option).........................................................................................92
Serial connection details..................................................................................... 92
Connection Procedure ........................................................................................ 92
The System Configuration Window..............................................................................95
Finding ports and device names........................................................................... 95
The Port Configuration screen ............................................................................. 96
11.2.1
11.2.2
11.3
11.3.1
11.3.2
11.3.3
11.3.4
11.4
11.4.1
11.4.2
11.5
11.5.1
11.5.2
12 APPENDICES.............................................................................................98
12.1
12.2
Glossary of Terms and Abbreviations...........................................................................98
Remote Control Connection Options ..........................................................................100
Single-unit serial connections.............................................................................100
Multiple-unit Ethernet connections ......................................................................101
Multiple-unit serial connections...........................................................................103
Ethernet and serial ...........................................................................................104
Setting up the Lantronix UDS1100 Converter..............................................................105
Configuring the Lantronix UDS1100 ....................................................................105
Connecting the system equipment ......................................................................107
Mix Templates for Routing Pages ..............................................................................109
Manual Mix (Routing Reset) ...............................................................................109
2 X 2 Way Crossover.........................................................................................109
2 X 4 Way Crossover.........................................................................................110
2 X 3 Way Crossover plus 2 Aux.........................................................................110
1 X 5 Way Crossover plus 3 Aux.........................................................................110
1 X 6 Way Crossover plus 2 Aux.........................................................................111
4 X Bi-Amp......................................................................................................111
Presets .................................................................................................................111
12.2.1
12.2.2
12.2.3
12.2.4
12.3
12.3.1
12.3.2
12.4
12.4.1
12.4.2
12.4.3
12.4.4
12.4.5
12.4.6
12.4.7
12.5
5
Download from Www.Somanuals.com. All Manuals Search And Download.
HELIX DN9848E Remote Control Software
User Guide
1 INTRODUCING THE HELIX DN9848E REMOTE CONTROL
SOFTWARE
The HELIX DN9848E Remote Control Software (HELIX DN9848E RCS) enables engineers to remotely
program a system of up to 16 HELIX DN9848E System Controller units from a laptop or PC for onward
downloading to the HELIX DN9848E System Controller units at a venue. Hence, programming can be
done in advance of a show from home or en route, leaving more time for fine-tuning.
At the venue, the settings can be quickly downloaded to the system. Thereafter, a HELIX DN9848E RCS
tablet/laptop PC can be used for real-time control of the system during both set-up and performance.
Using the HELIX DN9848E RCS offers an enhanced visual overview of unit performance, as well as
significant time-saving in switching between units, navigating ‘processing’ views and adjusting settings.
Furthermore, for optimal control during set-up, the tablet/laptop PC can be set up to communicate with
the system over a wireless connection, leaving the engineer free to move around the venue while
adjusting the processor settings. For performance, Ethernet communication is used, although there is
an option for conventional serial RS-232, if required. Settings can also be uploaded from the HELIX
DN9848E System Controller units to the HELIX DN9848E RCS.
In addition to the active settings, HELIX DN9848E RCS can also be used to remotely program the
32 lockable system memories and 5 user memories.
The HELIX DN9848E RCS runs as an Add-In to the Midas Klark Teknik ELGAR Library Manager, enabling
you to work on settings for your system controller devices alongside other Midas or Klark Teknik
devices, such as a H1000 console or DN9340 and DN9344 EQ units, and save them all in a single show
file. The show file can then be reused at subsequent venues. In addition, you can minimise time and
effort by copying settings between the HELIX DN9848E RCS Add-In units.
Please note that, for the purposes of this manual, a HELIX DN9848E unit is the actual physical version
connected to the system and an RCS unit is a unit in HELIX DN9848E RCS. Also, some of the
screenshots in the manual may appear slightly different to those on your screen due to configuration
and status of the system, units and your laptop/PC.
Note Earlier DN9848 devices (non-E) may be connected to, and controlled using the HELIX DN9848E
RCS provided that the connection to these devices is in accordance with Appendix 12.2 of this
User Guide.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
HELIX DN9848E Remote Control Software
User Guide
2 INSTALLING THE HELIX DN9848E RCS ADD-IN
Minimum System Requirements
2.1
Operating System:
Windows 2000 or Windows XP
Computer/Laptop:
Display resolution minimum 1024 X 768 pixels set at 96 DPI
Pentium III, 500MHz (or equivalent)
256MB RAM
Minimum 10MB of free disk space on hard drive
Connectivity:
Software:
Connection to the HELIX DN9848E units is via Ethernet (also with wireless
option), with the units operating V4.00 (or later) host code. There is also an
option for serial connection, which is done via the front panel. Full connection
options and respective equipment requirements are detailed in Section 11.
The following software must be installed prior to installing the HELIX DN9848E
Remote Control Software:
Microsoft .NET Framework 1.1 available at:
http://microsoft.com/downloads/details.aspx?FamilyId=262D25E3-F589-
4842-8157-034D1E7CF3A3&displaylang=en
Midas ELGAR Library Manager available at:
http://www.midasconsoles.com
7
Download from Www.Somanuals.com. All Manuals Search And Download.
HELIX DN9848E Remote Control Software
User Guide
2.2
Software Installation
HELIX DN9848E RCS Add-In is provided as an ‘.exe’ file from the Klark Teknik website
(www.klarkteknik.com) with an integral Setup Wizard that guides you through the installation process
on your laptop/PC.
Note We recommend that you save the .exe file to your desktop - or other holding folder - rather
than opening the file while the Internet transfer is in progress. This will avoid the possibility of
the integral Setup Wizard interrupting the transfer, especially on slower internet connections.
ꢀ
After you have downloaded the .exe file, install it on your laptop/PC as follows:
1
Run the “DN9848ERCS_Vn_nn.exe” file (where “n_nn” is
the latest software version). The Setup Wizard should
appear on-screen within a few seconds.
2
3
4
Following the on-screen instructions, click
to the Information window, which details the latest
improvements to the software. Previous users may find
this information particularly useful.
to go
Click
to go to the Select Desination Location window.
Leave the Destination Directory as the preset default, that is,
“C:\Program Files\Klark Teknik Group\ELGAR”, unless you
have installed ELGAR in an alternative directory. In the
latter case, specify your alternative ELGAR destination
directory.
Click
once again; this will take you to the Ready to
Install window.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
HELIX DN9848E Remote Control Software
User Guide
5
When you are ready to install, click
successful installation, click
. After
to exit the Wizard.
The HELIX DN9848E RCS will now be available through
the ELGAR Library Manager.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
HELIX DN9848E Remote Control Software
User Guide
3 GETTING STARTED
3.1
Opening HELIX DN9848E RCS within the ELGAR Library
Manager
Note To run HELIX DN9848E RCS you must have the Midas Klark Teknik ELGAR Library Manager
installed on your laptop/PC. The ELGAR Software and User Guide may be obtained from our
website at www.midasconsoles.com.
Note To use the HELIX DN9848E RCS to control a processing system, see section 11 for details on
Ethernet connection, setting up and configuration, and section 3.5 for online operation.
HELIX DN9848E RCS runs as an Add-In to the ELGAR Library Manager, which provides a single
management window for various Midas and Klark Teknik remote programming software applications.
By opening multiple Add-Ins within the ELGAR Library Manager you can work on settings for the various
Midas and Klark Teknik devices associated with a show at the same time. For example, you can have a
series of Klark Teknik HELIX DN9848E System Controller Add-Ins to cover your system, plus a Midas
Heritage 1000 Add-In with settings for a H1000 console and a series of HELIX DN9340 Digital EQs.
Furthermore, as the concurrently opened Add-Ins are saved, reopened etc., as a single show file using
the ELGAR File menu commands, you will save time in file management.
ꢀ
To add HELIX DN9848E RCS devices to the ELGAR Library Manager
1
Open ELGAR by double clicking on the ELGAR icon on your desktop.
2
From the ELGAR main menu bar, select Tools >
Add Device > DN9848 E.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
HELIX DN9848E Remote Control Software
User Guide
3
At the Add Multiple DN9848 E Devices
window, use the Number of Devices to
Add ꢁdrop down list to select the
number of devices, you wish to add,
up to a maximum 16. For example, 9.
4
Click OK to add the devices.
A DN9848 Units Home screen (diagram right) is
opened inside the ELGAR Library Manager. The
HELIX DN9848E RCS units are automatically
inserted in FastNav® (highlighted by orange box)
and numbered sequentially from 1 upwards. The
highest numbered unit is selected.
The DN9848 Units Home screen is the workspace
where you remotely program scene EQ settings for
your HELIX DN9848E system controllers; see
section 3.4.3 for details.
To use the HELIX DN9848E RCS to control a
processing system, see section 11 for details on
Ethernet connection, setting up, configuration etc.,
and section 3.5 for online operation.
ꢀ
To add more HELIX DN9848E RCS devices to the ELGAR Library Manager
1
2
From the ELGAR main menu bar, select Tools > Add Device > DN9848 E.
In the Add Multiple DN9848 E Devices window, select the number of devices you wish to add using
the Number of Devices to Add ꢁdrop down list; this will show only the number of available
devices left to add.
3
Click OK. These devices are added to the device list (left-hand side of screen), with each
new device being allocated the lowest available number. To cancel, click
right-hand corner of window.
at the top
Note
Devices can be added/removed, as required, at any time during HELIX DN9848E RCS
operation.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
HELIX DN9848E Remote Control Software
User Guide
ꢀ
To remove a HELIX DN9848E RCS device from the ELGAR Library Manager
From the ELGAR main menu bar, select Tools >
1
Remove Device and highlight the device you wish to
remove from the list. (You can rename each device
for easy identification; see section 3.2.5.)
2
Release left-hand mouse button. The device will disappear from the device list.
You can only remove one device at a time. Repeat the above steps for any other devices you wish to
remove.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
HELIX DN9848E Remote Control Software
User Guide
3.2
Using the Screens
This section provides information on screen navigation and the use of the controls, for example,
buttons, control knobs, faders etc.
3.2.1 Overview of FastNav® menus
13
Download from Www.Somanuals.com. All Manuals Search And Download.
HELIX DN9848E Remote Control Software
User Guide
3.2.2 Navigation
To move around the screens, click on the buttons in FastNav®; see section 3.2.1. Further screens, such
as the input and output response graphs, routing page and those from the buttons on the input and
output channel control panels, are all available from the DN9848 Units Home screen; see section 3.4.3.
3.2.3 Tool tips
‘Tool tips’ are boxes that appear for a short while
underneath the cursor when it pauses over certain
objects. These boxes contain a single line of text that
gives you useful information on the object, such as
the range of adjustment on a control knob (diagram
right), the function of a button or the description of a
field.
3.2.4 Using the on-screen controls
This section gives details on adjusting or resetting the on-screen controls, such as control knobs, faders
etc.
ꢀ
To adjust a control knob
1
Click on control knob to select it. A dotted box surrounding the
object will appear to indicate that it has been selected (see
diagram right).
2
Once selected you can adjust the control knob’s setting – shown in
the white box directly underneath - via the mouse or laptop/PC
keyboard; a combination of both may also be useful. The
on-screen control knob will rotate and the setting value will alter
accordingly.
Mouse: To adjust the value using the mouse, position the cursor within the dotted box and
click the left-hand mouse button. Then, while holding down the button, move the mouse to
make the required adjustment. The way in which the mouse movements alter the setting
depend on the Knob Mouse Direction configuration, see Section 6.4. When you have achieved
the required setting value, release left-hand mouse button. If you run out of adjustment
due to cursor reaching edge of screen, which may happen on the Delay control knobs due to
the large amount of adjustment available, select control knob again and repeat adjustment.
Keyboard: Using certain keys on your laptop/PC keyboard you can adjust the control knob
in regular increments (with the exception of frequency, which has a logarithmic scale). The
increment value is dependent on control knob function, adjustment range and unit type.
The keys give the following type of adjustment for each control knob, irrespective of Knob
Mouse Direction configuration:
ꢀ
ꢀ
Home and End keys take you to the minimum and maximum values, respectively.
Page Up and Page Down keys give coarse adjustment in positive and negative directions,
respectively. To protect the system these keys do not function for grouping rotaries.
ꢀ
ꢀ
u and v arrow keys give moderate adjustment in positive and negative directions,
respectively. To protect the system these keys do not function for grouping rotaries.
s and t arrow keys give fine adjustment in negative and positive directions,
respectively.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
HELIX DN9848E Remote Control Software
User Guide
ꢀ
To adjust a fader (see section 5.3.2 "Routing Page”)
Just click on fader to select it. Then, while holding down the
ꢀ
left-hand mouse button, drag mouse up and down until you have
achieved the required value (shown in white box directly underneath
fader). Release left-hand mouse button.
ꢀ
To quickly reset a control knob or fader value to default using the mouse
1
Click on control knob or fader using the right-hand
mouse button, for example, the “Input D” Gain
control knob. A reset option box will appear.
2
Move cursor over option box to highlight it.
3
Click left-hand mouse button; value reverts to
default.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
HELIX DN9848E Remote Control Software
User Guide
3.2.5 Changing a name
You can change the name of channels, units, memories etc. The following example shows you how to
change the name of an input channel but the principle is the same for any other name you wish to alter.
ꢀ
To change a name
Right click in the field whose name you
1
wish to change. For example, “Input A”
control panel on the DN9848 Units Home
screen.
2
Move cursor over Select All to highlight it.
3
4
Left click; all of input channel name is
highlighted.
At this point you can type in the new name, for example, “No3 i-p”.
Or:
With the name still highlighted, you can right-click again in
the name field to obtain a menu that allows you to:
ꢀ
ꢀ
Undo – undoes previous operation.
Cut – removes highlighted text and stores it ready for a
subsequent paste operation.
ꢀ
Copy – copies highlighted text without removing it and
stores it ready for a subsequent paste operation.
ꢀ
ꢀ
Paste – pastes stored text.
Delete - removes highlighted text completely without
storing it. Any subsequent paste operation will only paste the stored text from when
you last used Cut or Copy.
Please note that some of the above options are dependent on previous actions and current
operation, so they may not be available, as indicated by being ‘greyed out’. Also, certain
symbols are not allowed, for example, % and £.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
HELIX DN9848E Remote Control Software
User Guide
3.3
The HELIX DN9848E RCS Workspace
The DN9848 Units Home screen (illustrated below) is the default screen when starting up the HELIX
DN9848E RCS software. The screen comprises a main workspace area with FastNav® down the
left-hand side and four buttons along the bottom. The workspace and FastNav® area alter according to
FastNav® button selection, while the four buttons along the bottom are static.
Five buttons in FastNav® emulate the functionality of the HELIX DN9848E. You can open up to 16
HELIX DN9848E units within a single show file, with each one each being allocated a unit bar in
FastNav®.
FastNav®: contains the five
main menu buttons. A list of
DN9848E units connected to
the system are shown below
DN9848 Units button (DN9848
Units Home screen only)
Message bar shows the current
main view and unit selected
Close window
button
Main
workspace
Unit bar, see
section 3.3.1
Un-Mute All button:
unmutes all outputs
of all units
Mute All button:
mutes all outputs
of all units
All Units Offline button:
puts all units offline
All Units Online button:
puts all units online
FastNav® can display the maximum number of units, that is, 16, and shows them sequentially in
ascending order (top down).
17
Download from Www.Somanuals.com. All Manuals Search And Download.
HELIX DN9848E Remote Control Software
User Guide
3.3.1 FastNav® unit bar
Each HELIX DN9848E unit in the system has a dedicated unit bar in FastNav® that displays unit
information, as detailed in the illustration below. Clicking on a unit bar selects its associated unit.
During online operation, the activity indicators of each RCS unit provide audio metering, which mirror
the activity indicators of the HELIX DN9848E unit.
Signal present indicator
Clip in progress
indicator
Limiter gain reduction
indicator
Unit’s unique
identification number
Online status indicator: mimics
Online button in DN9848 Units Home
screen, where red indicates offline,
green online and yellow
unavailable
Name of unit
Lighter background indicates
that this unit is selected
ꢀ
To select a unit
ꢀ
Click on the bar of the required unit under the DN9848 Units button in FastNav®; its background
will lighten to indicate it is the current selection. The view containing the input and output
channel control panels will appear.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
HELIX DN9848E Remote Control Software
User Guide
3.4
Quick Tour of the HELIX DN9848E RCS Menu Screens
The HELIX DN9848E RCS workspace has five main screens, selectable via buttons in FastNav®:
•
Memory View – lets you copy/write working memory to/from HELIX DN9848E unit and RCS
unit memories.
•
•
Copy Channel View - lets you copy/paste input and output channels across RCS units.
DN9848E Units –gives you access to the control panels and response graphs of the input and
output channels, and also routing page and passwords.
•
•
Input Groups - lets you manage the input groups by creating and editing them.
Output Groups - lets you manage the output groups by creating and editing them.
Memory View - see section 3.4.1
Copy Channel View - see section 3.4.2
DN9848 Units - see section 3.4.3
Input Groups - see section 3.4.4
Output Groups - see section 3.4.5
19
Download from Www.Somanuals.com. All Manuals Search And Download.
HELIX DN9848E Remote Control Software
User Guide
3.4.1 Memory View screens
The Memory View has three screens, RCS Memories, Unit Memories and Copy RCS Memories, from which you can
manage the system units’ working memory. The screens are described in the following subsections and
operations involving the screens are described in detail within Section 9.
Each input has 32 lockable system memories (System 01 to System 32 for storing standard set-ups),
five free access user memories (User 01 to User 05 for storing set ups for the current show) and one
working memory. Each memory holds a store of 32 packets of memory, numbered from 1 to 32, with
each one corresponding to the 32 available system unit slots.
The working memory contains the current working settings for the system units and is stored in the
current RCS show file.
RCS Memories screen
The RCS Memories screen lets you store/recall the working memory of selected RCS units to/from one of
the system or user memory stores. You can reset working memories, and individual and collective
system and user memories on selected units. The RCS Memories screen also allows you to rename the
working memory on any RCS units. For a full description see Section 9.
Locked/Protected
Working Memories list: for
selecting unit(s) from which
working memory is copied
units are identified
by an * in the LC
column
Stored Memories list:
memory store locations
(32 system and 5 user)
Reset Memory button:
resets selected
memory to default
Reset System Memories
button: resets all
system memories to
default
Apply button: applies
memory name change
on selected units
Shows number and
Reset User Memories button:
resets all user memories
to default
Reset Working Memories button:
resets working memories of
selected units to default
name of currently
highlighted unit and,
below, selected
stored system or user
memory number
Allows you to change
the working memory
name on selected units
Store Working Memory
button: stores working
memory of selected units
in selected memory
Recall Memory button:
recalls selected memory
to Working Memories list
Select All button: selects
Deselect All button: deselects
all units in above list
all selected units
20
Download from Www.Somanuals.com. All Manuals Search And Download.
HELIX DN9848E Remote Control Software
User Guide
HELIX DN9848E Unit Memories
The Unit Memories screen lets you copy corresponding system and user memories between the RCS and
the actual physical units in the system. For a detailed description see Section 9.
Units list: for selecting
unit(s) that memory is
Locked & Protected units
are identified by an * in the LC
column
Comment field: gives details
on whether the operation is
successful or not
copied to/from
Memories list: unit
memory store locations
(32 system and 5 user)
Select All button: selects all
system and user memories
Deselect All button:
deselects all selected
system and user
memories
Read From Unit button:
reads memories from
selected unit(s)
Unit Progress status
Memory Progress status bar:
shows progress of stored
memory copying process
bar: shows progress
of device memory
copying process
Write To Unit button: writes
selected memories to
selected unit(s)
Deselect All button:
deselects all selected
units
Select All button: selects
all units in above list
Cancel button: cancels
memory copying process
21
Download from Www.Somanuals.com. All Manuals Search And Download.
HELIX DN9848E Remote Control Software
User Guide
Copy RCS Memories
The Copy RCS Memories screen lets you copy the memory of a single unit, which is stored in the HELIX
DN9848E RCS software, to the RCS memories of one or more of the other units in the system.
Memories list: destination
memories to which source
memory is copied
Source Unit field: for selecting
unit from which source memory
is copied
Destination Units(s) list: for
selecting which unit(s) the
source memory is copied to
Source Memory field: for
Select All button:
selects all system and
user memories
selecting memory to
copy
Deselect All button:
deselects all selected
system and user
memories
Deselect All button: deselects
all selected destination
units
Select All button:
selects all destination
units
Copy Memory button: copies source
memory of source unit to selected
destination memories of selected
destination unit(s)
22
Download from Www.Somanuals.com. All Manuals Search And Download.
HELIX DN9848E Remote Control Software
User Guide
3.4.2
Copy Channel View screen
The Copy Channel View screen gives you access to the Copy Input Channels and Copy Output Channels screens.
These screens let you copy and paste whole input or output channels or just selected elements from a
selected unit to selected channels of other units. A more detailed description of these processes appears
within Section 9.
Copy Input Channels screen
The Copy Input Channels screen lets you copy the following from the particular channel of a selected unit to
the selected channels of other units: the whole channel; gain, delay and mute settings; PEQs settings;
or protection settings.
Source Channel field:
for selecting input
channel to copy
Copy Options list: for selecting
Source Unit field: for
selecting unit from which
input channel is copied
which audio elements of
selected input channel you
wish to copy
Destination Channel(s)
list: for selecting input
channels to which
source input channel
is copied
Select All button:
selects all
destination units
Deselect All button:
deselects all selected
destination units
Locked
warnings will
appear here if
any channels are
Deselect All button:
deselects all selected
destination units
Copy button: copies selected input
channel of selected unit to
selected destination channel(s) of
destination unit(s)
locked
Select All button: selects
all destination units
Destination Unit(s) list: for
selecting which units the input
channels are copied to
23
Download from Www.Somanuals.com. All Manuals Search And Download.
HELIX DN9848E Remote Control Software
User Guide
Copy Output Channels screen
The Copy Output Channels screen lets you copy the following from a particular channel of a selected unit to
the selected channels of other units: the whole channel; gain, delay, mute and invert phase settings;
filter settings; dynamics settings; or PEQ settings.
Copy Options list: for selecting
which audio elements of selected
output channel you wish to copy
Source Unit field: for
Source Channel field:
selecting unit from
for selecting output
which output channel is
channel to copy
copied
Destination Channel(s)
list: for selecting
output channels to
which source output
channel is copied
Select All button:
selects all destination
channels
Deselect All button:
deselects all selected
destination channels
Locked warnings will
appear here if any
channels are locked
Deselect All button:
deselects all selected
destination units
Select All button:
selects all
destination units
Copy button: copies selected output
channel of selected unit to
selected destination channel(s) of
destination unit(s)
Destination Unit(s) list: for
selecting which unit(s) the
output channels are copied to
24
Download from Www.Somanuals.com. All Manuals Search And Download.
|