UNDERCOUNTER DISHWASHER
Use & Care Guide
For questions about features, operation/performance, parts accessories or service, call: 1-800-422-1230
In Canada, call for assistance 1-800-461-5681, for installation and service, call: 1-800-807-6777 or visit our website at...
LAVE-VAISSELLE ENCASTRÉ
Guide d’utilisation et d’entretien
Au Canada, pour assistance composez le 1-800-461-5681, pour installation ou service composez le 1-800-807-6777 ou visitez notre site web à...
Table of Contents/Table des matières.............................................................................2
Model/Modèle KUDI01DL
8531130
Download from Www.Somanuals.com. All Manuals Search And Download.
DISHWASHER SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all
safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or
“WARNING.” These words mean:
You can be killed or seriously injured if you don't
immediately follow instructions.
You can be killed or seriously injured if you don't
follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you
what can happen if the instructions are not followed.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using Your Dishwasher
Tip Over Hazard
Do not use dishwasher until completely installed.
Do not push down on open door.
Doing so can result in serious injury or cuts.
Electrical Shock Hazard
Electrically ground dishwasher.
Connect ground wire to green ground connector
in terminal box.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
I
Install where dishwasher is protected from the elements.
Protect against freezing to avoid possible rupture of fill valve.
Such ruptures are not covered by the warranty. See “Storing”
in the “Dishwasher Care” section for winter storage
information.
I
I
Install and level dishwasher on a floor that will hold the
weight, and in an area suitable for its size and use.
Remove all shipping plugs from hoses and connectors (such
as the cap on the drain outlet) before installing. See
Installation Instructions for complete information.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS AND FEATURES
1. Upper spray
2. Top rack
3. Model and serial number label
4. Water inlet opening [in tub wall
5. FLEXI-FOLD DOWN™ flexible tines
6. 4-way HYDRO SWEEP™
11. Silverware basket
spray arm
12. Overfill protection float
13. Heating element
14. Rinse aid dispenser
15. Control panel
7. Bottom rack
8. Detergent dispenser
9. Vent
10. Middle spray arm
Control Panel
5
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Push door firmly closed. The door latches automatically.
START-UP GUIDE
Before using your dishwasher, remove all packaging materials.
Read this entire Use and Care Guide. You will find important
safety information and useful operating tips.
Using Your New Dishwasher
7. Press the Start pad on the front of the dishwasher door. Or
press the Start pad to repeat the same cycle and options as
the previous cycle.
1. Scrape large food soil and hard items (toothpicks or bones)
from dishes.
2. Properly load the dishwasher. (See “Dishwasher Loading.”)
Make sure nothing prevents the spray arm(s) from spinning
freely.
The lights on the top control panel will turn off and the cycle
will begin. If the door is opened during the cycle, the cycle
and option lights will turn back on.
NOTE: If the dishwasher is not started within 30 seconds
after closing the door, the cycle and options will revert to the
last cycle and options completed.
3. Add detergent and check the rinse aid dispenser. Add rinse
aid if needed. (See “Dishwasher Use.”)
IMPORTANT:
I
When the cycle starts, you will see a rotating pattern of lights
in the display window indicating that the unit is operating.
4. Run hot water at the sink nearest your dishwasher until the
water is hot. (See “Dishwasher Efficiency Tips.”) Turn off
water.
This pattern will continue for up to 6 minutes while the
multiple sensors check the incoming water temperature, rinse
aid usage and soil level on dishes and cookware. The sensors
then determine the ideal cycle for your dish load. After
sensing is complete, the display will show the number of
minutes left in the cycle and the cycle countdown will begin.
I
The cycle countdown pauses and the water heating light
glows while the dishwasher heats the water to a set
temperature. (See “Cycle Selection Chart.”)
5. Press the desired cycle and option selections on the top of
the dishwasher door. (See “Dishwasher Use.”)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading Top Rack
DISHWASHER
LOADING
The top rack is designed for cups, glasses, and smaller items.
Many items, up to 9 in. (22 cm), fit in the top rack. (See
recommended loading patterns shown.)
NOTE: The features on your dishwasher rack may vary from the
drawings shown.
Loading Suggestions
I
Remove leftover food, bones, toothpicks and other hard
items from the dishes. To conserve water, energy and save
time it is not necessary to rinse dishes before putting them
into the dishwasher. The wash module removes food particles
from the water. The module contains a chopping device
which will reduce the size of food items.
NOTE: If hard items such as fruit seeds, nuts, and egg shells
enter the wash module, you might hear chopping, grinding,
crunching, or buzzing sounds. These sounds are normal
when hard items enter the module. Do not let metallic items
(such as pot handle screws) get into the wash module.
Damage can occur.
10 place setting
I
I
It is important for the water spray to reach all soiled surfaces.
Load dishes so they are not stacked or overlapping if
possible. For best drying, water must be able to drain from all
surfaces.
I
Load heavy pots and pans carefully. Heavy items can dent
the stainless steel interior of the door if they are dropped or
bumped.
I
I
Make sure pot lids and handles, pizza pans, cookie sheets,
etc., do not interfere with the spray arm rotation.
12 place setting
I
I
I
Place items so open ends face down for cleaning and
draining.
Conserve water, energy and save time over hand rinsing by
running a rinse cycle to keep dishes moist if you do not plan
to wash them soon. Foods such as eggs, rice, pasta,
spinach, and cooked cereals may be hard to remove if they
are left to dry over a period of time.
Load glasses and cups in top rack only. The bottom rack is
not designed for glasses and cups. Damage can occur.
Place cups and glasses in the rows between tines. Placing
them over the tines can lead to breakage and water spots.
Quiet operating tips
To avoid thumping/clattering noises during operation:
I
Make sure lightweight load items are secured in the racks.
I
Make sure pot lids and handles, pizza pans, cookie sheets,
etc., do not touch interior walls or interfere with the rotation of
the spray arm.
I
Load dishes so they do not touch one another.
NOTE: For built-in models, keep sink drain plugs closed during
dishwasher operation to prevent noise transfer through drains.
Cup and glass load
I
I
I
China, crystal, and other delicate items must not touch each
other during dishwasher operation. Damage may occur.
Load plastic items in the top rack only. Only plastic items
marked “dishwasher safe” are recommended.
Load plastic items so the force of the spray does not move
them during the cycle.
I
I
To avoid chipping, do not let stemware touch other items.
Small bowls, pans, and other utensils can be placed in the
top rack. Load bowls in the center section for best stability.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
I
Load cookie sheets, cake pans, and other large items at the
sides and back. Loading such items in front can keep the
water spray from reaching the detergent dispenser.
Loading Bottom Rack
The bottom rack is designed for plates, pans, casseroles, and
utensils. Many items, up to 13 in. (33 cm) tall, fit in the bottom
rack. (See recommended loading patterns shown.)
NOTE: The features on your dishwasher rack may vary from the
drawings shown.
Mixed load
I
I
Secure heavily soiled cookware face down in the rack.
Make sure pot handles and other items do not stop rotation
of the spray arm(s). The spray arm(s) must move freely.
10 place setting
I
Do not load items between the bottom rack and the side of
the dishwasher tub because they might block the water inlet
opening.
FLEXI-FOLD DOWN™ flexible tines (on some models)
You can fold down one or both rows of tines at the back of the
bottom rack.
12 place setting
I
Do not load glasses, cups, or plastic items in the bottom
rack. Load small items in the bottom rack only if they are
secured in place.
1. Grasp the tip of the tine that is in the tine holder.
2. Gently pull the tine out of the tine holder.
I
I
I
Load plates, soup bowls, etc., between tines.
Overlap the edges of plates for large loads.
3. Lay the row of tines down in the rack to make room for larger
dishes, bowls, pots, pans or roasters.
Load soup, cereal, and serving bowls in the rack in a variety
of ways depending upon their size and shape. Load bowls
securely between the rows of tines. Do not nest bowls
because the spray will not reach all surfaces.
Loading Silverware Basket
Load the silverware basket while it is in the bottom rack or take
the basket out for loading on a counter or table.
NOTE: Unload or remove the basket before unloading the racks
to avoid spilling water droplets on the silverware.
Utensil load
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Mix items in each section of the basket with some pointing up
and some down to avoid nesting. Spray cannot reach nested
items.
Filling the dispenser
1. If the dispenser cover is closed, open the cover by pushing
the cover latch.
2. Fill the Main Wash section with detergent. See “How Much
IMPORTANT: Always load sharp items (knives, skewers, etc.)
Detergent to Use.”
pointing down.
3. Fill the Pre-Wash section, if needed.
4. Close the dispenser cover.
NOTES:
I
Do not load silver or silver-plated silverware with stainless
steel. These metals can be damaged by contact with each
other during washing.
I
Some foods (such as salt, vinegar, milk products, fruit juices,
etc.) can pit or corrode silverware. Run a rinse cycle if you do
not have a full load to wash immediately.
It is normal for the cover to open partially when dispensing
detergent.
NOTE: Use both sections for cycles with 2 washes. Use only the
main wash section for cycles with 1 wash. See the “Cycle
Selection Charts” for more details.
DISHWASHER USE
How much detergent to use
Detergent Dispenser
I
The amount of detergent to use depends on the hardness of
your water and the type of detergent. If you use too little,
dishes won’t be clean. If you use too much in soft water,
glassware will etch.
The detergent dispenser has 2 sections. The smaller Pre-Wash
section empties detergent into the dishwasher when you close
the door.
I
I
I
Water hardness can change over a period of time. Find out
your water’s hardness by asking your local water department,
water softener company, or county extension agent.
1
3
You can order a water hardness test strip. In the
U.S.A., call the Customer Interaction Center and ask for Part
Number 4171690.
2
4
Different brands of dishwasher detergent have different
amounts of phosphorus for softening water. If you have hard
water and use a detergent with a phosphorous content of
less than 8.7%, you might need to use more detergent, or use
a detergent with a phosphorous content higher than 8.7%.
1. Cover latch
2. Main Wash section
3. Pre-Wash section
4. Cover
Water Hardness
Amount of Detergent
The larger Main Wash section automatically empties detergent
into the dishwasher during the wash. (See the “Cycle Selection
Charts.”)
Soft to Medium
Hard Water
For normally soiled loads
I
Partially fill the Main Wash
section (5 tsp or 25 g)
I
Use automatic dishwashing detergent only. Other detergents
can produce excessive suds that can overflow out of the
dishwasher and reduce washing performance.
0 to 6 grains per
gallon
I
Fill the Pre-Wash section
(4 tsp or 20 g)
I
I
Add detergent just before starting a cycle.
NOTE: Add only 2 tsp or 10 g of
detergent to the Pre-Wash section if
dishes are pre-rinsed or the water is
very soft (0 to 2 grains per gallon).
Store tightly closed detergent in a cool, dry place. Fresh
automatic dishwasher detergent results in better cleaning.
NOTE: Do not use detergent with a rinse cycle.
For heavily soiled loads
I
Partially fill the Main Wash
section (7 tsp or 35 g)
I
Fill the Pre-Wash section
(4 tsp or 20 g)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
set the adjuster to 1 or 2. If there are rings or calcium (hard water)
spots on dishes, try a higher setting.
Water Hardness
Amount of Detergent
Medium to Hard
Water
For normal and heavily
soiled loads
7 to 12 grains per
gallon
I
Partially fill the Main Wash
section (7 tsp or 35 g)
I
Fill the Pre-Wash section
(4 tsp or 20 g)
To adjust the setting
Open the dispenser cover. Turn the adjuster inside the dispenser
to the desired setting.
Very Hard Water
For normally and
heavily soiled loads
13 grains per gallon
and above
I
I
I
Fill the Main Wash section
(8 tsp or 40 g)
NOTE: It might be
necessary to use the
Heavy cycle, or a
normal cycle with
Hi-Temp Scrub, for
best wash
Dishwasher Efficiency Tips
Fill the Pre-Wash section
(4 tsp or 20 g)
Hot water dissolves and activates the dishwashing detergent.
Hot water also dissolves grease on dishes and helps glasses dry
spot-free. Is the water temperature too low? For best
dishwashing results, water should be 120°F (49°C) as it enters
the dishwasher. Loads may not wash as well if the water
temperature is too low. Water that is too hot can make some soils
harder to remove and cause certain detergent ingredients not to
function. If your water heater is located far from the dishwasher, it
may be necessary to run the hot water at the faucet closest to the
dishwasher to minimize the amount of cold water in the water
line.
Turn the rinse aid dispenser to a
higher setting. See “Rinse Aid
Dispenser” later in this section.
performance with
very hard water.
NOTE: Fill amounts shown are for standard powdered detergent.
Amounts may vary if you use liquid or concentrated powdered
detergent. Follow instructions on the package when using liquid
dishwasher detergent or concentrated powdered detergent.
To check water temperature
1. Run hot water at the faucet closest to your dishwasher for at
least 1 minute.
Rinse Aid Dispenser
Rinse aids prevent water from forming droplets that can dry as
spots or streaks. They also improve drying by allowing water to
drain off of the dishes during the final rinse by releasing a small
amount of the rinse aid into the rinse water. Your dishwasher is
designed to use a liquid rinse aid. Do not use a solid or bar-type.
2. Place a candy or meat thermometer in a glass measuring
cup.
Filling the dispenser
The rinse aid dispenser holds 4.8 oz (145 mL) of rinse aid. Under
normal conditions, this will last for about three months. Rinse aid
is released through an opening in the dispenser. When latched
properly, the cover remains closed. The cover should be opened
only when refilling the dispenser. You do not have to wait until the
dispenser is empty to refill it. Try to keep it full, but be careful not
to overfill it.
3. Check the temperature on the thermometer as the water is
running into the cup.
I
I
I
To save water, energy and time, do not rinse dishes before
putting them into the dishwasher.
1. Make sure the dishwasher door is fully open.
2. Open the dispenser by pushing the cover latch.
Use the Normal cycle whenever possible. This cycle uses
less hot water and energy than other cycles.
1
3
Use a delay feature (on some models) to run your dishwasher
during off-peak hours. Local utilities recommend avoiding
heavy usage of energy at certain times of day.
2
I
I
During the summer, run your dishwasher at night. This
reduces daytime heat buildup in the kitchen.
Use an air dry, or an energy-saving dry option whenever
possible. Allow longer drying times (overnight) when using
these options. Use a rinse aid to improve drying.
1. Cover latch
2. Rinse aid dispenser
3. Indicator window
I
I
I
Use cycles or options that add extra heat to the wash or rinse
portion of the cycle only when needed.
3. Add rinse aid until the indicator window looks full.
4. Clean up any spilled rinse aid with a damp cloth.
5. Close the cover.
Run your dishwasher with full loads. Run a rinse cycle after
meals until the dishwasher is full.
If your home is equipped with a water softener, you may want
to avoid starting the dishwasher during the regeneration of
the softener, as this may contribute to poor wash
performance.
NOTE: The cover latch clicks when the cover is closed and
latched.
Rinse aid setting
The amount of rinse aid released into the final wash can be
adjusted. The factory setting is at 2. For most water conditions,
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Cycle Selection Charts
Canceling a Cycle
Select the wash cycle and options desired. Or press START to
repeat the same cycle and options as the previous cycle.
Anytime during a cycle, press the Cancel pad.
NOTE: If the last cycle you completed was a rinse cycle, the
dishwasher will run the last full wash cycle and options that you
selected when you press Start.
I
If the power is off or the door is open for an extended period
of time, the Start button memory will default to the Normal
cycle with heated drying.
The display shows
I
If you do not run the dishwasher daily, close the door to
maintain memory.
A “G” shows what steps are in each cycle.
Temperatures indicate where extra heat is added.
Water usage is shown in U.S. gallons/liters.
This model meets the ENERGY STAR® guidelines for energy
efficiency.
Your dishwasher starts a 2-minute drain (if needed). Let the
dishwasher drain completely. The light turns off after 2
minutes.
NOTE: If your dishwasher does not need draining, the light turns
off. Select a new cycle and options.
Cycle time includes dry time. An asterisk ( * ) by the cycle time
indicates the cycle time might be longer depending on the
temperature of the water entering the dishwasher. The cooler the
water, the longer the cycle time. If the water is already hot
enough, the cycle time will be as shown.
To stop the drain
You can press the Cancel pad again to stop the drain
immediately. Remember to drain the dishwasher before starting a
new cycle.
To clear the indicators
Press the Cancel pad before starting the dishwasher to clear all
options and cycles.
Use this cycle for
heavily-soiled pots,
pans, casseroles,
regular tableware and
harder than normal
water conditions.
Use both detergent
dispenser sections.
Changing a Cycle or Setting
During the first minute of a cycle
Pre-
Wash
Main
Wash
Rinse
Rinse
Final
Heated
Rinse
Dry
Time
(min)
Water
Usage
(gal/L)
1. Open the door.
2. Press a new cycle and/or options.
3. Check the detergent dispensers. They must be filled properly
G
130°F
(54°C)
G
140°F
(60°C)
G
G
140°F
(60°C)
G
89*
6.9/26
for the new cycle.
4. Close the door. The dishwasher resumes the new cycle
and/or option after a 5-second pause.
Use this cycle for loads
with normal amounts of
food soil. (The energy-
usage label is based on
this cycle.)
After the first minute of a cycle
1. Press the Cancel pad.
Use both detergent
dispenser sections.
Pre-
Wash
Main
Wash
Purge†
Rinse
Final
Heated
Rinse
Dry
Time
(min)
Water
Usage
(gal/L)
The display shows
G
G
120°F
(49°C)
G
G
140°F
(60°C)
G
79*
5.9/22.3
Use this rinse cycle for
rinsing dishes, glasses,
and silverware that will
not be washed right
away.
Your dishwasher starts a 2-minute drain (if needed). Let
the dishwasher drain completely. The light turns off after 2
minutes.
Do not use detergent
with this cycle.
NOTE: If your dishwasher does not need draining, the light
turns off.
Pre-
Wash
Rinse
Main
Wash
Rinse
Final
Heated
Rinse
Dry
Time
(min)
Water
Usage
(gal/L)
2. Open the door.
3. Select a new cycle and/or options.
G
10
1.8/7
4. Check the detergent dispensers. They must be filled properly
for the new cycle.
†
A small amount of water is run through the pump to remove
soil particles between the main wash and final rinse.
5. Close the door.
6. Press the Start pad.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Control Lock
Use Control Lock to prevent unintended use of your dishwasher.
You can also use the control lock feature to prevent unintended
cycle or option changes during a cycle.
Adding Items During a Cycle
You can add an item anytime before the main wash starts. Open
the door and check the detergent dispenser. If the cover is still
closed, you can add items.
To add items
When CONTROL LOCK is lit, all buttons are disabled.
1. Lift up the door latch to stop the cycle. Wait for the spraying
NOTES:
action to stop before opening the door.
I
The dishwasher door can be opened while the controls are
locked.
2. Open the door. If the detergent dispenser cover is still closed,
add the item.
I
You can turn on the Lock while the dishwasher is running.
3. Close the door firmly until it latches. The dishwasher resumes
the cycle after about a 5-second pause.
To turn on the Lock
Press and hold
Option Selections
You can customize your cycles by pressing an option. If you
change your mind, press the option again to turn the option off.
Select a different option if desired.
You can change an option anytime before the selected option
begins. For example, you can press an unheated drying option
any time before drying begins.
for 4 seconds. CONTROL LOCK glows.
If you press any pad while your dishwasher is locked, the light
flashes 3 times.
Press START to repeat the same cycle and options as the
previous wash cycle.
To turn off the Lock
NOTE: If the last cycle you completed was a rinse cycle, when
you press Start, the dishwasher runs the last full wash cycle and
options.
Press and hold ENERGY SAVER™ Dry System control for 4
seconds. The light turns off.
Status Indicators
Hi-Temp Scrub
Select this option to raise the water temperature in the main
wash, and add a rinse. The higher water temperature, and added
rinse, help clean tough soils.
This option adds heat, water and wash time to the cycle.
Water Heating
WATER HEATING glows, and the cycle progression pauses,
whenever water is heated during a cycle.
NOTE: Hi-Temp Scrub is an option with the Heavy and Normal
cycles.
Wash or rinse action continues as the water heats.
Clean
ENERGY SAVER™ Dry System
CLEAN glows when a cycle is finished. The light turns on when
you open the door. The light turns off when you close the door or
press CANCEL.
Select this option to dry dishes without heat and save energy.
ENERGY SAVER™ Dry System is useful when loads contain
plastic dinnerware that may be sensitive to high temperatures.
Wash System
The five-level wash system provides excellent cleaning results.
Four levels of filtration, and a soil collector system, filter the wash
water and prevent food particles from redepositing on the clean
dishes.
The dishes take longer to dry, and some spotting can occur. For
best drying, use a liquid rinse aid. Some items (such as plastics)
may need towel drying.
I
The wash water continuously flows through the Ultra-Fine
filter, trapping food particles.
NOTE: Rinse Only automatically uses this option. ENERGY
SAVER™ Dry System is an option with all other cycles.
I
I
Two water jets, located under the spray arm remove the food
particles from the Ultra-Fine filter.
A coarse strainer prevents bones, pits, and other large
objects from entering the pump system.
NOTE: Periodically check the coarse strainer and remove any
objects on the strainer.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Material
Dishwasher Safe?/Comments
Yes
Drying System
Crystal
During drying, you can see steam escaping through the vent at
the upper left corner of the door. This is normal as the heat dries
your dishes.
Check manufacturer’s recommendations
before washing. Some types of leaded
crystal can etch with repeated washing.
Gold
No
Gold-colored flatware will discolor.
Glass
Yes
Milk glass yellows with repeated
dishwasher washing.
IMPORTANT: The vapor is hot. Do not touch the vent
during drying.
Hollow-Handle
Knives
No
Handles of some knives are attached to
the blade with adhesives which can
loosen if washed in the dishwasher.
Overfill Protection Float
The overfill protection float (in the front right corner of the
dishwasher tub) keeps the dishwasher from overfilling. It must be
in place for the dishwasher to operate.
Pewter, Brass,
Bronze
No
High water temperatures and detergent
can discolor or pit the finish.
Disposable
Plastics
No
Cannot withstand high water
temperatures and detergents.
Plastics
Yes
Check under the float for objects that may keep the protector
from moving up or down.
Always check manufacturer’s
recommendations before washing.
Plastics vary in their capacity to withstand
high temperatures and detergents. Load
plastics in top rack only.
WASHING SPECIAL
ITEMS
Stainless Steel
Yes
Run a rinse cycle if not washing
If you have doubts about washing a particular item, check with
the manufacturer to see if it is dishwasher safe.
immediately. Prolonged contact with food
containing salt, vinegar, milk products, or
fruit juice can damage finish.
Material
Dishwasher Safe?/Comments
Sterling Silver or
Silver Plate
Yes
Aluminum
Yes
Run a rinse cycle if not washing
immediately. Prolonged contact with food
containing salt, acid, or sulfide (eggs,
mayonnaise, and seafood) can damage
finish.
High water temperature and detergents
can affect finish of anodized aluminum.
Disposable
Aluminum
No
Do not wash throwaway aluminum pans
in the dishwasher. These might shift
during washing and transfer black marks
to dishes and other items.
Tin
No
Can rust.
Wooden Ware
No
Bottles and Cans No
Wash bottles and cans by hand. Labels
Wash by hand. Always check
manufacturer’s instructions before
washing. Untreated wood can warp,
crack, or lose its finish.
attached with glue can loosen and clog
the spray arms or pump and reduce
washing performance.
Cast Iron
No
Seasoning will be removed and iron will
rust.
China/
Stoneware
Yes
Always check manufacturer’s
recommendations before washing.
Antique, hand-painted, or over-the-glaze
patterns may fade. Gold leaf can discolor
or fade.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Drain Air Gap
DISHWASHER CARE
Check the drain air gap anytime your dishwasher isn’t draining
well.
Some state or local plumbing codes require the addition of a
drain air gap between a built-in dishwasher and the home drain
system. If a drain is clogged, the drain air gap protects your
dishwasher from water backing up into it.
Cleaning
Cleaning the exterior
In most cases, regular use of a soft, damp cloth or sponge and a
mild detergent is all that is necessary to keep the outside of your
dishwasher looking nice and clean.
The drain air gap is usually located on top of the sink or
countertop near the dishwasher. To order a drain air gap call your
local dealer, or in the U.S.A., call the Customer Interaction Center
and ask for Part Number 300096.
Cleaning the interior
Hard water minerals can cause a white film to build up on the
inside surfaces, especially just beneath the door area.
Do not clean the dishwasher interior until it has cooled. Wear
rubber gloves. Do not use any type of cleanser other than
dishwasher detergent because it may cause foaming or sudsing.
NOTE:
The drain air gap is an external plumbing device that is
not part of your dishwasher. The warranty provided with your
dishwasher does not cover service costs directly associated with
the cleaning or repair of the external drain air gap.
To clean interior
Make a paste with powdered dishwasher detergent on a damp
sponge and clean.
To clean the drain air gap
Clean the drain air gap periodically to ensure proper drainage of
your dishwasher. Follow the cleaning instructions provided by the
manufacturer. With most types, you lift off the chrome cover.
Unscrew the plastic cap. Then check for any soil buildup. Clean if
necessary.
OR
Use liquid automatic dishwasher detergent and clean with a
damp sponge.
OR
See the vinegar rinse procedure in “Spotting and filming on
dishes” in “Troubleshooting.”
Storing
Storing for the summer
NOTE: Run a Normal cycle with detergent after cleaning the
interior.
Protect your dishwasher during the summer months by turning
off the water supply and power supply to the dishwasher.
Winterizing your dishwasher
Protect your dishwasher and home against water damage due to
freezing water lines. If your dishwasher is left in a seasonal
dwelling or could be exposed to near freezing temperatures, have
your dishwasher winterized by authorized service personnel.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Dishes are not completely clean
Food soil left on the dishes
TROUBLESHOOTING
I
Is the dishwasher loaded correctly? Refer to the “Dishwasher
Loading” section.
First try the solutions suggested here and possibly avoid
the cost of a service call...
Is the water temperature too low? For best dishwashing
results, water should be 120°F (49°C) as it enters the
dishwasher. Refer to the “Dishwasher Efficiency
Tips” section.
Dishwasher is not operating properly
I
Dishwasher does not run or stops during a cycle
Is the door closed tightly and latched?
Did you use the correct amount of fresh detergent? Use
recommended dishwasher detergents only. Refer to the
“Detergent Dispenser” section. Never use less than 1 tb (15 g)
per load. Detergent must be fresh to be effective. Store
detergent in a cool, dry area. Heavy soil and/or hard water
generally require extra detergent.
Is the right cycle selected? Refer to the “Cycle Selection
Charts.”
Is there power to the dishwasher? Has a household fuse
blown or circuit breaker tripped?
Has the motor stopped due to an overload? The motor
automatically resets itself within a few minutes. If it does not
restart, call for service.
Is detergent caked in dispenser? Use fresh detergent only. Do
not allow detergent to sit for several hours in a wet dispenser.
Clean dispenser when caked detergent is present.
Is the water shut-off valve (if installed) turned on?
Is the pump or spray arm clogged by labels from bottles and
cans? If you wash bottles and cans in your dishwasher, check
for labels clogging the pump or spray arm.
I
I
Dishwasher will not fill
Is the overfill protection float able to move up and down
freely? Press down to release.
Is the home water pressure high enough for proper
dishwasher filling? Home water pressure should be 20 to 120
psi (138 to 828 kPa) for proper dishwasher fill. A booster
pump on the water supply can be added if pressure is
too low.
Dishwasher seems to run too long
Is the water supplied to the dishwasher hot enough? The
dishwasher runs longer while heating water. Refer to the
“Dishwasher Efficiency Tips” section.
Are high suds slowing the wash arm? Never use soap or
laundry detergents. Use recommended dishwasher
detergents only.
A delay automatically occurs in some wash and rinse cycles
until the water reaches the proper temperature.
I
I
Water remains in the dishwasher
Spots and stains on dishes
Spotting and filming on dishes
Is the cycle complete?
I
Detergent remains in the covered section of the
dispenser
Is your water hard or is there a high mineral content in your
water? Conditioning the final rinse water with a liquid rinse
aid helps eliminate spotting and filming. Keep the rinse aid
dispenser filled.
Is the cycle complete?
Is the detergent lump-free? Replace detergent if necessary.
White residue on the front of the access panel
I
Is the water temperature too low? For best dishwashing
results, water should be 120°F (49°C) as it enters the
dishwasher. Refer to the “Dishwasher Efficiency
Tips” section.
Was too much detergent used? Refer to the “Detergent
Dispenser” section.
Is the brand of detergent making excess foam? Try a different
brand to reduce foaming and eliminate buildup.
Did you use the correct amount of effective detergent? Use
recommended dishwasher detergents only. Refer to the
“Detergent Dispenser” section. Never use less than 1 tb (15 g)
per load. Detergent must be fresh to be effective. Store
detergent in a cool, dry area. Heavy soil and/or hard water
generally require extra detergent.
I
Odor in the dishwasher
Are dishes washed only every 2 or 3 days? Run a rinse cycle
once or twice a day until you have a full load.
Does the dishwasher have a new plastic smell? Run a vinegar
rinse as described in “Spotting and filming on dishes” later in
this Troubleshooting guide.
I
Condensation on the kitchen counter (built-in models)
Is the dishwasher aligned with the countertop? Moisture from
the vent in the dishwasher console can form on the counter.
Refer to the Installation Instructions for more information.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Is the home water pressure high enough for proper
dishwasher filling? Home water pressure should be 20 to 120
psi (138 to 828 kPa) for proper dishwasher fill. A booster
pump on the water supply can be added if pressure is too
low.
Dishes do not dry completely
Dishes are not dry
I
Did you load your dishwasher to allow proper water
drainage? Do not overload. Refer to the “Dishwasher
Loading” section. Use a liquid rinse aid to speed drying.
NOTE: To remove spots and film from dishes, try a white
vinegar rinse. This procedure is intended for occasional use
only. Vinegar is an acid and using it too often could damage
your dishwasher.
Are the plastics wet? Plastics often need towel drying.
Is the rinse aid dispenser empty? Refer to the “Rinse Aid
Dispenser” section.
1. Wash and rinse dishes. Use an air-dry or an energy saving
dry option. Remove all silverware or metal items.
Did you use an air-dry or energy-saving dry option? Use a
heated drying option for dryer dishes.
2. Put 2 cups (500 mL) white vinegar in a glass or
dishwasher-safe measuring cup on the bottom rack.
3. Run the dishwasher through a complete washing cycle
using an air-dry or an energy saving dry option. Do not
use detergent. Vinegar will mix with the wash water.
Silica film or etching (silica film is a milky, rainbow-
colored deposit; etching is a cloudy film)
Dishes are damaged during a cycle
Chipping of dishes
I
I
Did you load the dishwasher properly? Load the dishes and
glasses so they are stable and do not strike together from
washing action. Minimize chipping by moving the rack in and
out slowly.
Sometimes there is a water/chemical reaction with certain
types of glassware. This is usually caused by some
combination of soft or softened water, alkaline washing
solutions, insufficient rinsing, overloading the dishwasher,
and the heat of drying. It might not be possible to prevent the
problem, except by hand washing.
NOTE: Antiques, feather-edged crystal, and similar types of
china and glassware might be too delicate for automatic
dishwashing. Wash by hand.
To slow this process use a minimum amount of detergent but
not less than 1 tb (15 g) per load. Use a liquid rinse aid and
underload the dishwasher to allow thorough rinsing. Silica
film and etching are permanent and cannot be removed. Do
not use heated drying.
Noises
I
Grinding, grating, crunching or buzzing sounds
A hard object has entered the wash module (on some
models). When the object is ground up, the sound should
stop.
I
I
White spots on cookware with non-stick finish
Has the dishwasher detergent removed cookware
seasoning? Reseason cookware after washing in the
dishwasher.
Brown stains on dishes and dishwasher interior
Does your water have high iron content? Rewash dishes
using 1-3 tsp (5-15 mL) of citric acid crystals added to the
covered section of the detergent dispenser. Do not use
detergent. Follow with a Normal wash cycle with detergent. If
treatment is needed more often than every other month, the
installation of an iron removal unit is recommended.
I
I
Black or gray marks on dishes
Are aluminum items rubbing dishes during washing?
Disposable aluminum items can break down in the
dishwasher and cause marking. Hand wash these items.
Remove aluminum markings by using a mild abrasive cleaner.
Orange stains on plastic dishes or dishwasher interior
Are large amounts of tomato-based foods on dishes placed
in the dishwasher? Stains gradually fade over time. Regular
use of heated drying will slow fading. Stains will not affect
dishwasher performance. Regular use of a rinse cycle and an
air-dry or energy-saving dry option will reduce the likelihood
of staining.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
In Canada
ASSISTANCE
OR SERVICE
Call the KitchenAid Canada Customer Interaction Center toll free:
1-800-461-5681 Monday to Friday 8:00 a.m. - 6:00 p.m. (EST).
Saturday 8:30 a.m. - 4:30 p.m. (EST).
Our consultants provide assistance with:
Before calling for assistance or service, please check
“Troubleshooting.” It may save you the cost of a service call. If
you still need help, follow the instructions below.
I
Features and specifications on our full line of appliances.
Referrals to local dealers.
I
When calling, please know the purchase date and the complete
model and serial number of your appliance. This information will
help us to better respond to your request.
For service in Canada
1-800-807-6777. KitchenAid designated service technicians
are trained to fulfill the product warranty and provide after-
warranty service, anywhere in Canada.
Call
If you need replacement parts
If you need to order replacement parts, we recommend that you
only use factory specified parts. These parts will fit right and work
right, because they are made with the same precision used to
build every new KITCHENAID® appliance. To locate factory
specified replacement parts in your area, call our Customer
Interaction Center telephone number or your nearest designated
service center.
For further assistance
If you need further assistance, you can write to KitchenAid
Canada with any questions or concerns at:
KitchenAid Canada
Customer Interaction Center
1901 Minnesota Court
Mississauga, Ontario L5N 3A7
Please include a daytime phone number in your correspondence.
In the U.S.A.
Call the KitchenAid Customer Interaction Center
toll free: 1-800-422-1230.
Our consultants provide assistance with:
I
I
I
I
I
Features and specifications on our full line of appliances.
Installation information.
Use and maintenance procedures.
Accessory and repair parts sales.
Specialized customer assistance (Spanish speaking, hearing
impaired, limited vision, etc.).
I
Referrals to local dealers, repair parts distributors, and
service companies. KitchenAid designated service
technicians are trained to fulfill the product warranty and
provide after-warranty service, anywhere in the United States.
To locate the KitchenAid designated service company in your
area, you can also look in your telephone directory Yellow
Pages.
For further assistance
If you need further assistance, you can write to KitchenAid with
any questions or concerns at:
KitchenAid Brand Home Appliances
Customer Interaction Center
553 Benson Road
Benton Harbor, MI 49022-2692
Please include a daytime phone number in your correspondence.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
KITCHENAID® DISHWASHER WARRANTY
ONE-YEAR FULL WARRANTY
For one year from the date of purchase, when this dishwasher is operated and maintained according to instructions attached to or
furnished with the product, KitchenAid will pay for replacement parts and repair labor to correct defects in materials or workmanship.
Service must be provided by a KitchenAid designated service company.
SECOND THROUGH FIFTH YEAR LIMITED WARRANTY ON NYLON COATED DISHRACKS, WASH AND DRAIN MOTOR,
ELECTRONIC CONTROL SYSTEM AND HEATING ELEMENT
In the second through fifth years from the date of purchase, when this dishwasher is operated and maintained according to instructions
attached to or furnished with the product, KitchenAid will pay for replacement parts for the following components if defective in
materials or workmanship: the upper and lower nylon racks, the wash and drain motor, the electronic controls, the heating element.
LIFETIME FULL WARRANTY ON STAINLESS STEEL TUB AND INNER DOOR
For the lifetime of the product from the date of purchase, when this dishwasher is operated and maintained according to instructions
attached to or furnished with the product, KitchenAid will pay for replacement parts and repair labor for the stainless steel tub and/or
inner door if the tub and/or inner door develops a water leak caused by rust-through resulting from defective materials or workmanship.
Service must be provided by a KitchenAid designated service company.
KitchenAid will not pay for:
1. Service calls to correct the installation of your dishwasher, to instruct you how to use your dishwasher, to replace house fuses or
correct house wiring or plumbing.
2. Repairs when your dishwasher is used in other than normal, single-family household use.
3. Damage resulting from accident, alteration, misuse, abuse, fire, floods, acts of God, improper installation, or installation not in
accordance with local electrical and plumbing codes, or the use of products not approved by KitchenAid.
4. Any labor costs during the limited warranty period.
5. Replacement parts or repair labor costs for units operated outside the United States or Canada.
6. Pickup and delivery. This product is designed to be repaired in the home.
7. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.
8. In Canada, travel or transportation expenses for customers who reside in remote areas.
KITCHENAID AND KITCHENAID CANADA SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Some states or provinces do not allow the exclusion or limitation of incidental or consequential damages, so this exclusion or limitation
may not apply to you. This warranty gives you specific legal rights and you may also have other rights which may vary from state to
state or province to province.
Outside the 50 United States and Canada, this warranty does not apply. Contact your authorized KitchenAid dealer to
determine if another warranty applies.
If you need service, first see “Troubleshooting.” Additional help can be found by checking “Assistance or Service,” or by calling our
Customer Interaction Center at 1-800-422-1230, from anywhere in the U.S.A. or write: KitchenAid Brand Home Appliances, Customer
Interaction Center, 553 Benson Road, Benton Harbor, MI 49022-2692. In Canada, call KitchenAid Canada at 1-800-807-6777.
11/00
Keep this book and your sales slip together for future
Dealer name____________________________________________________
Address________________________________________________________
Phone number__________________________________________________
Model number __________________________________________________
Serial number __________________________________________________
Purchase date __________________________________________________
reference. You must provide proof of purchase or installation
date for in-warranty service.
Write down the following information about your dishwasher to
better help you obtain assistance or service if you ever need it.
You will need to know your complete model number and serial
number. You can find this information on the model and serial
number label/plate, located on your appliance as shown in
“Parts and Features.”
18
Download from Www.Somanuals.com. All Manuals Search And Download.
8531130
6/02
Printed in U.S.A.
Imprimé aux É.-U.
© 2002. All rights reserved.
® Registered Trademark/TM Trademark of KitchenAid, U.S.A., KitchenAid Canada licensee in Canada
® Marque déposée/TM Marque de commerce de KitchenAid, U.S.A., Emploi licencié par KitchenAid Canada au Canada
Tous droits réservés.
Download from Www.Somanuals.com. All Manuals Search And Download.
|