Midline Blender
Service Manual
MODELS
Australian Series
5KSB555AAC (Almond Creme)
5KSB555AER (Empire Red)
5KSB555AGR (Imperial Grey)
5KSB555AOB (Onyx Black)
5KSB555AWH (White)
Britain Series
5KSB555BAC (Almond Creme)
5KSB555BER (Empire Red)
5KSB555BMY (Majestic Yellow)
5KSB555BOB (Onyx Black)
5KSB555BWH (White)
5KSB555BBU (Cobalt Blue)
5KSB555BPK (Pink)
5KSB555BNK (Brushed Nickel)
5KSB555BPM (Pearl Metallic)
European Series
5KSB555EAC (Almond Creme)
5KSB555EER (Empire Red)
5KSB555EGR (Imperial Grey)
5KSB555EOB (Onyx Black)
5KSB555EWH (White)
5KSB555EBU (Cobalt Blue)
5KSB555ECR (Chrome)
5KSB555EMY (Majestic Yellow)
5KSB555ENK (Brushed Nickel)
5KSB555EPM (Pearl Metallic)
5KSB555ETG (Tangerine)
5KSB555EPK (Pink)
Swiss Series
5KSB555SWH (White)
5KSB555SER (Empire Red)
5KSB555SGR (Imperial Grey)
5KSB555SOB (Onyx Black)
© 04/2010 KitchenAid
W10327947
Download from Www.Somanuals.com. All Manuals Search And Download.
BLENDER SERVICE MANUAL
BLENDER REPAIR MANUAL
SUBJECT
PAGE
SAFETY GUIDELINES............................................................................................................................. 2
PRODUCT FEATURES............................................................................................................................ 4
PREPARING THE BLENDER FOR USE ................................................................................................. 4
PRELIMINARY INSPECTION OF BLENDER .......................................................................................... 6
OPERATING THE KITCHENAID BLENDER............................................................................................ 6
BLENDER SERVICE PROCEDURES ..................................................................................................... 7
MODEL AND SERIAL NUMBERS............................................................................................................ 9
PARTS LIST ........................................................................................................................................... 10
FOREWORD:
The KitchenAid blender is a high-quality appliance. All KitchenAid blenders are well designed and built. Normally
they will give continual use year-after-year without service attention. Records have been maintained over a period
of years to determine and correct, through improved design, any troubles that might possibly develop. An effort
has been made in preparation of this manual to cover all service issues.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
BLENDER SERVICE MANUAL
6. Die-Cast Metal Base: Heavy, die-cast metal base
ensures stable, quiet operation when blending a
full pitcher of ingredients. Four rubber feet on wide,
solid base provide a no-slip, non-marring grip.
Smooth and rounded, the base is easy to clean and
features cord storage underneath.
Product Features
The following are some of the KitchenAid Blender’s
unique product features (Fig. 1):
7. Robust Motor: Rugged 0.9-horsepower motor
supplies the power for superb performance with all
blending tasks – from pureeing sauces to making
chunky salsas, or uniformly crushing a pitcher of ice
or frozen fruit within seconds for silky smoothies.
8. Intelli-Speed TM Motor Control: Exclusive Intelli-
Speed TM control automatically works to keep speed
constant – even through density changes when
ingredients are added. This advanced KitchenAid
design maintains an optimal blending speed for
each culinary task and control setting.
9. Clean Touch Control Panel: Wipes clean in an
instant. Smooth control pad has no crevices or
cracks to trap ingredients.
10. Soft Start Blending Feature: The blender starts
at a slower speed to pull food into the blade then
quickly increases to selected speed setting. This
design feature reduces start-up kick and allows
hands-free operation.
11. Speed Selection Buttons: Create frozen drinks
and puree sauces or soups in seconds. Blend with
confidence, control, and consistency at all speed
settings: STIR ( ), CHOP ( ), MIX ( ),
Figure 1
1. Stay-Put Lid with Clear, 60 ml Ingredient Cup:
Provides a strong seal. The flexible lid will maintain
its tight seal throughout the life of the blender.
The lid incorporates a removable 60 ml cup for
convenience in measuring and adding ingredients.
PUREE ( ), and LIQUEFY ( ). The PULSE (
mode works with all five speeds. The CRUSH
)
ICE ( ) feature is designed specifically for crushing
ice and will automatically pulse at staggered
intervals for optimal results.
2. Easy Pour 1.5 L Glass Pitcher: Glass pitcher
resists scratches, stains, and odors. Pitcher is
removable from locking collar for easy cleaning, and
withstands a range of extreme temperatures. Easy
pour spout provides smooth, drip-free pouring.
Preparing the Blender for Use
Before First Use
Before using your blender for the first time, wipe
blender base with a warm sudsy cloth, then wipe clean
with a damp cloth. Dry with a soft cloth. Wash pitcher,
lid, locking collar and blade assembly, sealing ring and
ingredient cup in warm, sudsy water. Rinse parts and
wipe dry.
3. Locking Collar and Blade Assembly: Durable,
one-piece blade design is built into the locking collar
for easy handling and cleaning. Dishwasher-safe
assembly keeps the blades from rotating until the
pitcher is properly attached to the collar and put on
the blender base.
4. Patented Stainless Steel Blade: Sharp oversized
blade tines are positioned on four different planes
for fast, thorough, and consistent blending.
5. Durable Steel-Reinforced Couplers: Commercial-
quality couplers with 12 interlocking teeth provide
direct transfer of motor power to the blade. Pitcher
coupler is coated for quiet operation.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
BLENDER SERVICE MANUAL
Blender Assembly
5. Adjust the length of the blender power cord (Fig.6).
1. Put locking collar with blades pointing up on a sturdy
surface (Fig. 2).
Figure 6
Figure 2
6. Put pitcher assembly onto the blender base (Fig. 7).
2. Put sealing ring (1), flat side down, around the
blades and into the groove within the locking
collar (2) (Fig. 3).
1
2
Figure 7
NOTE: When properly positioned, pitcher assembly will
rest completely on blender base. If not, repeat steps 3
and 4.
Figure 3
3. Align the pitcher tabs with the slots of the locking
collar (Fig. 4).
7. Put lid on pitcher.
WARNING
Figure 4
Electrical Shock Hazard
4. Press down and rotate pitcher clockwise,
approximately ¼ turn until two clicks are
heard (Fig. 5).
Plug into grounded outlet.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire or electrical shock.
8. Plug power cord into a grounded outlet. Blender is
now ready for operation.
9. Before removing the pitcher assembly from the
base, always press “O” and unplug the power cord.
Figure 5
5
Download from Www.Somanuals.com. All Manuals Search And Download.
BLENDER SERVICE MANUAL
Preliminary Inspection of Blender
Before servicing the blender, the following inspection
should be performed. All service should be performed
on a clean, dry surface with good illumination.
Operating the KitchenAid Blender
The KitchenAid blender will operate in two different
operating modes: Continuous mode and pulse mode.
Continuous Operation
• Lid and Ingredient Cap: Place the lid on top of the
jar and push securely on the jar with the ingredient
cap in place.
• Power Base: Inspect the blender power base. Make
sure the coupling at the end of the motor shaft moves
freely. Make sure the four rubber feet are level. Make
sure that all of the base assembly screws under the
rubber feet are intact and secure.
Continuous operation of the blender is accomplished by
pushing a “MODE” pad on the blender’s control panel.
Place one of your hands on top of the jar lid and press
one of the speed pads with your other hand.
NOTE: A short delay reaching the selected speed is
normal due to the soft start feature. The blender should
run and an indicator light for the selected speed will
come on.
• Clean Touch Pad: Make sure the blender’s clean
touch pad is clean and not distorted.
You can check all the speeds by pressing either a
higher or lower speed, without stopping the Motor.
• Power Cord (Stored in Base) (Fig. 8): Before any
operation of the blender is performed, check the
power cord for cuts or tears. If any damage to the
power cord is found, replace the entire power cord
before attempting operation.
To turn the blender off, press the “O” pad. The “O” pad
will stop any speed and deactivate the blender at the
same time.
Always deactivate the blender by pressing the “O” pad
and unplugging the power cord before removing the
blender jar.
Pulse Operation
Activate the “Pulse At Any Speed” feature by pressing
the “PULSE” pad. You will hear a click, and the indicator
light above the pad will blink, indicating that the blender
is activated.
Place one of your hands on top of the jar lid and press
one of the desired speed pads with your other hand for
the desired pulse time.
NOTE: A short delay reaching the selected speed is
normal due to the soft start feature.
Figure 8
To turn the pulse feature off, just press the “O” pad. The
blender is now ready for continuous operation.
WARNING
Electrical Shock Hazard
Plug into grounded outlet.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire or electrical shock.
You are now ready to check the operation of the
blender. Plug the power cord into a grounded AC outlet.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
BLENDER SERVICE MANUAL
If any of the rubber feet (2) are heavily soiled or
cracked, you should replace all four of them.
Blender Service Procedures
When replacing or installing the rubber feet (2), make
sure that they are all inserted equally into the power
base (1) so that the blender will sit level on the work
surface.
WARNING
Power Cord Replacement (Fig. 10)
Always be sure to inspect the condition of the blender’s
power cord (4) before running the unit.
Replace the power cord (4) when heavily soiled, cut, or
damaged in any way.
Electrical Shock Hazard
Disconnect power before servicing.
Once the four screws (3) on the bottom of the power
base (1) are removed, the upper housing (5) and
base (6) can be easily separated for power cord (4) and
component inspection.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical
shock.
Note the orientation of the power cord so that the
proper orientation can be repeated when installing the
new cord assembly.
Unplug blender or disconnect power before servicing.
Before starting any service procedure, review the
“Safety Guidelines” in the front of this manual.
To replace the power cord (4), disconnect filter
connector (7) and remove ground screw (8) with a
Phillips screwdriver.
Perform any blender disassembly on a clean surface
and provide a cushion for the power base to avoid
scratching the surface of the product.
Remove the original power cord (4) by sliding the
power cord strain relief from the upper housing (5).
Power Base Access (Fig. 9)
To access the power base (1), remove four rubber feet
(2) on the bottom of the power base (1). Remove four
Phillips head screws (3) with a clean, medium-sized
Phillips screwdriver.
Figure 10
Before installing the new power cord (4), remove any
soil from the base (6) using a mild dishwashing soap.
If the base (6) is contaminated or stained, replace the
base (6).
Figure 9
7
Download from Www.Somanuals.com. All Manuals Search And Download.
BLENDER SERVICE MANUAL
Electronic Speed Control
Motor Replacement (Fig. 13)
Board Replacement (Fig. 11)
After the coupler (14) has been removed, disconnect
the motor connector (11) and the hall effect
connector (12) from the control board (9). Remove the
To replace the electronic speed control board (9),
disconnect filter connector (10), motor connector (11),
and hall effect connector (12) from the electronic speed two Phillips screws (16) and motor (17) from the upper
control board (9).
housing (5).
Using a flathead screwdriver, press tabs (13) on
each side of control board (9) to remove from upper
housing (5).
Figure 13
EMI Filter Replacement (Fig. 14)
To remove the EMI filter (18), disconnect connector (7)
from the power cord (4) and disconnect connector (10)
from the electronic speed control board (9). Remove
a Phillips screw (19) and EMI filter (18) from the upper
housing (5).
Figure 11
To install the control board (9), snap into upper
housing (5) and connect all connectors.
Coupler Replacement (Fig. 12)
The coupler (14), in the upper housing (5), can be
removed by using a flathead screwdriver and a large
pair of pliers. Place the screwdriver in the slot of the
motor shaft (15). Hold the coupler (14) with the pliers.
Turn the shaft clockwise to remove the coupler.
The coupler (14) is threaded in a left-hand manner on
the end of the motor shaft. To install a new coupler, you
will use a counterclockwise rotation. Avoid damage to
the new coupler when installing by placing tape over
the jaws of the pliers.
Figure 14
Figure 12
8
Download from Www.Somanuals.com. All Manuals Search And Download.
BLENDER SERVICE MANUAL
Hall Effect Sensor (Fig. 15)
Model and Serial Numbers
The various speeds of the blender are maintained
under varying load conditions with a hall effect
sensor (20), located at the bottom of the motor (17).
KITCHENAID MODEL NUMBER DESIGNATIONS
5 K SB 555 A ER
0
MODEL NUMBER
MANUFACTURER
K = KitchenAid
To remove the hall effect sensor (20), use a flathead
screwdriver to open two tabs (21) that hold the hall
effect sensor (20) to the motor (17). Disconnect
connector (12) from the control board (9).
PRODUCT GROUP
SB = Standard Blender
MODEL SERIES
ELECTRICAL CODE
A = Australian
B = Britain
E = European
S = Swiss
COLOR CODE
AC = Almond Creme
BU = Cobalt Blue
ER = Empire Red
GR = Imperial Grey
OB = Onyx Black
WH = White
PK = Pink
NK = Brushed Nickel
PM = Pearl Metalic
CR = Chrome
MY = Majestic Yellow
TG = Tangerine
Figure 15
ENGINEERING CHANGE (0, 1, 2, 3, ETC.)
Final Inspection
Always test the unit for proper operation after you have
completed a service procedure.
KITCHENAID SERIAL NUMBER DESIGNATIONS
W
S
25 XXXXX
SERIAL NUMBER
MANUFACTURING SITE
W = Greenville
WARNING
YEAR OF PRODUCTION
P = 2003 R = 2004 S = 2005
WEEK OF PRODUCTION
PRODUCT SEQUENCE NUMBER
Electrical Shock Hazard
Plug into grounded outlet.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire or electrical shock.
Always check the blender for the presence of soil
from earlier food preparation and clean it before
repackaging. The blender power base and lid can be
cleaned with a mild soap solution applied to a damp
cloth and wiped dry with a soft towel. The blender jar
can easily be cleaned by placing it in an automatic
dishwasher.
You can also fill the jar half full of warm water and add a
few drops of liquid dishwasher detergent. Cover the jar
and blend the mixture in the “STIR” position for 10 - 20
seconds. Shut the blender off and unplug the unit from
the AC outlet. Rinse the blender jar with clean water
and dry with a clean towel.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
BLENDER SERVICE MANUAL
Parts List
Unit Parts
For Variations of Model 5KSB555A
Item No.
Part No.
Description
1
Literature Parts
7
W10236556 Use & Care Guide
W10285042 Repair Parts List
Upper Housing
1
Literature Parts
2
2
W10153370 Almond Creme
9709259 Empire Red
9709226 Onyx Black
9709499 Imperial Grey
9708896 White
5
3
4
W10068250 Screw
Control Assembly (Includes Overlay)
W10202144 Silver
9709366 Motor Seal
W10249833 Motor, 240V, 5sp
W10279256 Drive Coupling
Base
12
4
11
5
6
7
8
3
W10153630 Almond Creme
9709917 Empire Red
9708937 Onyx Black
9708890 White
13
6
9
W10001200 Screw
Rubber Foot
3
10
9708927 Grey
11
Power Cord
8
9708920 White
9708933 Black
12
13
W10283470 Nameplate
W10269237 EMI Filter
9
10
10
Download from Www.Somanuals.com. All Manuals Search And Download.
BLENDER SERVICE MANUAL
Attachment Parts
For Variations of Model 5KSB555A
Item No.
Part No.
Lid Assembly (Includes Cap)
W10236600 Almond Creme
Description
1
1
W10236597 Empire Red
9709363 Onyx Black
9709362 White
2
2
Jar Assembly
W10279537 Almond Creme
W10279533 Empire Red
W10279534 Onyx Black
W10279528 White
3
4
5
W10221782 Jar, Glass
W10292571 Gasket, Jar
3
Collar, w/Blades
W10279521 Almond Creme
W10279517 Empire Red
W10279518 Onyx Black
W10279516 White
4
5
11
Download from Www.Somanuals.com. All Manuals Search And Download.
BLENDER SERVICE MANUAL
Parts List
Unit Parts
For Variations of Model 5KSB555B
Item No.
Part No.
Description
1
Literature Parts
7
W10236556 Use & Care Guide
W10285046 Repair Parts List
Upper Housing
1
Literature Parts
2
2
W10153370 Almond Creme
9709259 Empire Red
9709226 Onyx Black
9708896 White
W10153368 Cobalt Blue
W10153367 Majestic Yellow
9709257 Brushed Nickel
W10153369 Pearl Metallic
9709497 Pink
5
12
4
11
3
4
W10068250 Screw
Control Assembly (Includes Overlay)
W10291857 Silver
3
5
6
7
8
9709366 Motor Seal
W10249833 Motor, 240V, 5sp
W10279256 Drive Coupling
Base
13
6
W10153630 Almond Creme
9709917 Empire Red
9708937 Onyx Black
9708890 White
3
8
W10153582 Cobalt Blue
W10153962 Majestic Yellow
9709504 Pink
9
9
W10001200 Screw
Rubber Foot
10
10
9708927 Grey
11
Power Cord
9708918 White
9708929 Black
12
13
W10283470 Nameplate
W10269237 EMI Filter
12
Download from Www.Somanuals.com. All Manuals Search And Download.
BLENDER SERVICE MANUAL
Attachment Parts
For Variations of Model 5KSB555B
Item No.
Part No.
Lid Assembly (Includes Cap)
W10236600 Almond Creme
Description
1
1
W10236597 Empire Red
9709363 Onyx Black
9709362 White
2
W10236601 Cobalt Blue
W10236599 Majestic Yellow
W10236598 Pink
2
Jar Assembly
W10279537 Almond Creme
W10279533 Empire Red
W10279534 Onyx Black
W10279528 White
3
W10279538 Cobalt Blue
W10279536 Majestic Yellow
W10279535 Pink
3
4
5
W10221782 Jar, Glass
W10292571 Gasket, Jar
4
5
Collar, w/Blades
W10279521 Almond Creme
W10279517 Empire Red
W10279518 Onyx Black
W10279516 White
W10279522 Cobalt Blue
W10279520 Majestic Yellow
W10279519 Pink
13
Download from Www.Somanuals.com. All Manuals Search And Download.
BLENDER SERVICE MANUAL
Parts List
Unit Parts
For Variations of Model 5KSB555E
Item No.
Part No.
Description
1
Literature Parts
7
W10236556 Use & Care Guide
W10285048 Repair Parts List
Upper Housing
1
Literature Parts
2
2
W10153370 Almond Creme
9709259 Empire Red
9709226 Onyx Black
9709499 Imperial Grey
9708896 White
5
W10153368 Cobalt Blue
9709500 Chrome
12
4
11
W10153367 Majestic Yellow
9709257 Brushed Nickel
W10153369 Pearl Metallic
9709496 Tangerine
9709497 Pink
3
3
4
W10068250 Screw
Control Assembly (Includes Overlay)
W10291857 Silver
13
6
5
6
7
8
9709366 Motor Seal
W10249833 Motor, 240V, 5sp
W10279256 Drive Coupling
Base
3
W10153630 Almond Creme
9709917 Empire Red
9708937 Onyx Black
9708890 White
8
9
W10153582 Cobalt Blue
W10153962 Majestic Yellow
9709503 Tangerine
9709504 Pink
10
9
W10001200 Screw
Rubber Foot
10
9708927 Grey
11
Power Cord
9708919 White
9708931 Black
12
13
W10283470 Nameplate
W10269237 EMI Filter
14
Download from Www.Somanuals.com. All Manuals Search And Download.
BLENDER SERVICE MANUAL
Attachment Parts
For Variations of Model 5KSB555E
Item No.
Part No.
Lid Assembly (Includes Cap)
W10236600 Almond Creme
Description
1
1
W10236597 Empire Red
9709363 Onyx Black
9709362 White
2
W10236601 Cobalt Blue
W10236599 Majestic Yellow
W10236602 Tangerine
W10236598 Pink
2
Jar Assembly
W10279537 Almond Creme
W10279533 Empire Red
W10279534 Onyx Black
W10279528 White
3
W10279538 Cobalt Blue
W10279536 Majestic Yellow
W10279539 Tangerine
W10279535 Pink
4
5
3
4
5
W10221782 Jar, Glass
W10292571 Gasket, Jar
Collar, w/Blades
W10279521 Almond Creme
W10279517 Empire Red
W10279518 Onyx Black
W10279516 White
W10279522 Cobalt Blue
W10279520 Majestic Yellow
W10279523 Tangerine
W10279519 Pink
15
Download from Www.Somanuals.com. All Manuals Search And Download.
BLENDER SERVICE MANUAL
Parts List
Unit Parts
For Variations of Model 5KSB555S
Item No.
Part No.
Description
1
Literature Parts
7
W10236556 Use & Care Guide
W10285050 Repair Parts List
Upper Housing
1
Literature Parts
2
2
9709259 Empire Red
9709226 Onyx Black
9709499 Imperial Grey
9708896 White
3
4
W10068250 Screw
Control Assembly (Includes Overlay)
W10291857 Silver
9709366 Motor Seal
W10249833 Motor, 240V, 5sp
W10279256 Drive Coupling
Base
5
12
4
11
5
6
7
8
3
9709917 Empire Red
9708937 Onyx Black
9708890 White
13
6
9
W10001200 Screw
Rubber Foot
10
9708927 Grey
3
11
Power Cord
9708921 White
9708935 Black
8
12
13
W10283470 Nameplate
W10269237 EMI Filter
9
10
16
Download from Www.Somanuals.com. All Manuals Search And Download.
BLENDER SERVICE MANUAL
Attachment Parts
For Variations of Model 5KSB555S
Item No.
Part No.
Lid Assembly (Includes Cap)
Description
1
W10236597 Empire Red
9709363 Onyx Black
9709362 White
1
2
2
Jar Assembly
W10279533 Empire Red
W10279534 Onyx Black
W10279528 White
3
4
5
W10221782 Jar, Glass
W10292571 Gasket, Jar
Collar, w/Blades
W10279517 Empire Red
W10279518 Onyx Black
W10279516 White
3
4
5
17
Download from Www.Somanuals.com. All Manuals Search And Download.
TM
FOR THE WAY IT’S MADE.
KitchenAid Countertop Appliances
St. Joseph, Michigan 49085 U.S.A.
® Registered Trademark/TM Trademark of Kitchen Aid, U.S.A.
Printed in U.S.A. 4/10
Download from Www.Somanuals.com. All Manuals Search And Download.
|