Download from Www.Somanuals.com. All Manuals Search And Download.
Features
ꢀ Sleeved High-Power Tinsel Lead Wires eliminate
broken leads and power loss, due to the common use of
“insufficient-gauge” lead wires.
ꢀ Vacuum Formed Polymineral Cone with ISD™
(Inverted Structural Dome) is a high performance
composite, which remains rigid, minimizes cone flex and lowers
harmonic distortion. The Comp’s cone consists of a unique
one-piece material that moves as a light weight piston,
exhibiting power and control.
ꢀ Spring-Loaded Nickel Plated Terminals flawlessly
connect medium to heavy gauge speaker wire to the
high-power tinsel lead wires.
ꢀ Two-Piece Vented Hyper-Extended Blackened Pole
Piece and Backplate
ꢀ Rear Cone Brace integrates into the Comp’s cone with a
continuous contact perimeter weld, which offers unmatched
strength and resistance to deformation under pressure.
1. Optimizes heat transfer efficiency for cooler operation
and maximum power handling ability.
ꢀ Double Stitched Surround adds a mechanical fastener to
the chemical adhesives. This duo prevents the cone and
surround from separating in the harshest conditions.
2. Eliminates erratic magnetic flux from the voice-coil gap.
3. Releases pressure under the suspension for uniform
cone movement and responsive low bass.
ꢀ Optimized Polyfoam Ribbed Surround Radius allows
extended cone excursion for additional bass output and higher
SPL, and couples the suspension into a conjoined
linear-motion body.
4. Prevents the voice-coil from bottoming out and
corresponding damage.
ꢀ New Enhanced BAM (Basket and Motor) Assembly
utilizes a high strength steel basket, features a low-profile open
design, and provides a solid foundation for the
ꢀ High-Temp Polyimide Film Voice Coil Former
improves sonic and conductive properties, and prevents
thermal-electrical meltdown.
precision-aligned motor assembly.
ꢀ Ultra-Length Voice Coil sustains enormous cone excursion
and provides extra heat dissipation.
ꢀ Perimeter Venting in the BAM relieves pressure from
under the spider, supports a linear excursion, and helps
dissipate heat from the voice coil and motor structure.
Download from Www.Somanuals.com. All Manuals Search And Download.
Comp Subwoofers
3
Performance
C8
Model:
C10
C12
C15
Nominal Impedance [Zn], ohm
Resonance Frequency [fs], Hz
Sensitivity [SPLo], dB @ 1W, 1m
Effective Piston Area [Sd], in2 (m2)
Power Handling Watts, Peak (RMS)
Effective Frequency Range, Hz
Effective Excursion [EXmax™], in (mm)
DC Resistance [Re], ohm
4 or 8
4 or 8
4 or 8
4 or 8
40.2
29.4
26.5
21.7
85.6
87.3
89.1
90.2
31.9 (.0206)
200 (100)
30-500
57.4 (.037)
300 (150)
30-500
82.5 (.0532)
300 (150)
27-500
132.7 (.0856)
500 (250)
25-500
.34 (8.76)
3.98
.38 (9.76)
3.70
.38 (9.76)
3.69
.45 (11.53)
3.32
Voice Coil Inductance [Le], mH
Voice Coil Diameter [d], in (mm)
Voice Coil Length [h], in (mm)
Mechanical Q-Factor [Qms]
Electrical Q-Factor [Qes]
2.40
3.15
2.90
3.44
1 3/8 (35.5)
.85 (21.5)
10.00
1 5/8 (40.5)
.99 (25.2)
9.65
1 5/8 (40.5)
.99 (25.2)
9.61
1 13/16 (45.5)
1.22 (31.0)
11.20
.544
.473
.447
.397
Total Q-Factor [Qts]
.516
.451
.427
.383
Force Factor [BL], Tm
9.45
11.32
12.50
15.32
Equivalent Volume [Vas], ft3 (L)
Moving Mass [Mms], oz (g)
Net Displacement, in3 (cc)
.69 (19.54)
1.70 (48.33)
38 (620.0)
8 1/2 (21.6)
7 1/16 (18.0)
4 (10.2)
25 (.71)
2.27 (64.38)
3.13 (88.8)
60.0 (982.3)
10 11/16 (27.1)
9 1/4 (23.5)
4 15/16 (12.5)
33 (.936)
4.50 (127.65)
4.01 (113.57)
104.9 (1718.6)
12 1/2 (31.8)
11 1/8 (28.3)
5 3/4 (14.6)
45 (1.28)
9.61 (272.33)
7.38 (209.31)
198.7 (3256.8)
15 7/16 (39.1)
13 7/8 (35.2)
7 3/8 (18.7)
75 (2.13)
Outer Frame Diameter, in (cm)
Hole Cut-Out Diameter, in (cm)
Mounting Depth, in (cm)
Magnet Weight, oz (kg)
Measurements based on 4 ohm voice coil models.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Comp Subwoofers
Installation
The Kicker Comp subwoofers are designed to be extremely versatile. Comp subwoofers excel in a sealed or vented box, and they
surpass the competition on an infinite baffle (free-air) installation.
Infinite Baffle Mounting
The infinite baffle mounting method effectively utilizes the rear deck and trunk space of most sedan type vehicles. Mark the rear
deck or parcel shelf for the hole cut-out diameter of the subwoofer and cut the holes. The rear deck may need to be reinforced to help
hold the weight of the subwoofer and to keep it from flexing during playback. Mount 3/4” (1.9 cm) thick MDF (Medium Density
Fiberboard) to the bottom of the deck. Mark the MDF and cut the holes. If MDF is not available in your area, use marine grade
plywood.
To optimize the infinite baffle installation, prevent the trunk, or rear, sound waves (generated from the back of the subwoofer cone)
from entering the passenger area of the vehicle. Gaps or holes in the trunk area may be filled with silicone.
Note: To get the best performance from your Comp subwoofer, we recommend
using genuine Kicker Accessories and Wiring.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Comp Subwoofers
Note: If you prefer an ultra-smooth bass response, you should
loosely fill your Comp enclosure with poly-fil (polyester fiberfill)
stuffing. Ported designs will require covering the end of the port
(located inside the box) with grill cloth, chicken wire, or expanded
metal to prevent the poly-fil from being blown out of the port. The
use of poly-fil stuffing will slightly decrease efficiency, but will
deepen and extend the low frequency output.
Box Building Notes
The cardboard “Template” inside your Comp’s shipping carton
can be used as a pattern for cutting the speaker mounting hole in
your enclosure. The cardboard template is the same size as the
Comp basket. After marking your baffle with the template, make
sure to cut directly on the line. This will maintain the proper baffle
cut-out size for the Comp basket.
Do not install a port opening against a solid surface, such as
an internal brace, back-panel or trunk wall, seat or interior panel
of your vehicle. The port opening must remain unobstructed. Use
the smallest dimension of the rectangular port or the diameter of
the round port as the minimum amount of space between the
port opening and any solid surface to insure unrestricted airflow.
All the cubic feet numbers given in the following pages include
the displacement of the woofer. For the ported enclosures the
displacement of the port must be added to the final design.
Always use 3/4" (1.9 cm) or thicker MDF and make sure all the
joints are fastened and well sealed. The peak pressure in a
ported box can exceed that of a sealed enclosure. All of these
designs need some internal bracing. Add 2" x 2" (5 cm x 5 cm) to
3" x 3" (8 cm x 8 cm) triangle braces between each of the larger
unsupported panels.
For more advice on box building, click on the SUPPORT tab
Technical Support tab, choose the Tech Manuals tab, and then
download or view the corresponding information. Please E-mail
for specific or unanswered questions.
Kicker recommends using a high-grade wood glue and silicone
sealer for an airtight box.
A Note on Power Handling Capacity
Comp subwoofers will handle large amounts of power in any of
the recommended enclosures, sealed or vented. The smaller
enclosures are best for use in limited-space applications. The
larger recommended enclosures will yield slightly more bass at
the lowest frequencies. The infinite baffle (free-air) mounting
method will handle moderate amounts of power and take up less
trunk or passenger space.
X
x = 3" x 3" for C15, C12
x = 2" x 2" for C10, C8
X
X
Download from Www.Somanuals.com. All Manuals Search And Download.
Comp Subwoofers
6
Recommended Enclosures
Comp Sealed Enclosure Applications
The Kicker Comp excels when used in the recommended sealed boxes. These sealed enclosure designs will give the smoothest
response with increased energy at the lowest frequencies,
20 to 30 Hz. These designs deliver massive amounts of high impact bass and can be driven with high levels of amplifier power.
The Comp high performance suspension system can operate in a larger sealed enclosure without sacrificing its power handling
ability. This maximum enclosure volume application is ideal for SQ (ultra sound quality) installations. The SQ enclosure generates a
very flat response curve and superbly extends sub bass.
Comp subwoofers perform well in any size sealed enclosure between the Compact and SQ volume recommendations. These
systems will exhibit benefits of both designs: Compact produces high impact bass and SQ generates low bass frequency protraction.
Overall, the system will sound more like the recommended enclosure design it is closest to in enclosure volume.
These enclosure recommendations have been calculated with the airspace inside the enclosure and include the displacement of
the woofer.
Recommended Sealed Enclosures - Moderate Efficiency
Model
Compact (Minimum Enclosure Volume)
SQ (Maximum Enclosure Volume)
C8
.5 ft3 Power Handling = 100W RMS
14.2 L
1.2 ft3 Power Handling = 100W RMS
34.0 L
C10
C12
C15
1.0 ft3 Power Handling = 150W RMS
28.3 L
2.4 ft3 Power Handling = 150W RMS
68.0 L
1.25 ft3 Power Handling = 150W RMS
35.4 L
3.5 ft3 Power Handling = 150W RMS
99.1 L
2.25 ft3 Power Handling = 250W RMS
63.7 L
5.0 ft3 Power Handling = 250W RMS
141.6 L
Download from Www.Somanuals.com. All Manuals Search And Download.
Comp Subwoofers
7
Panel Dimensions for Minimum Recommended Sealed Enclosures using 3/4” (1.9 cm) thick MDF:
Volume, ft3 (L)
.5 (14.2)
Panel A
Model
C8
Panel B
11 x 9.5
13.5 x 12
14.5 x 13
Panel C
9.5 x 9.5
12 x 12
13 x 13
11 x 11
C10
C12
C15
1.0 (28.3)
13.5 x 13.5
14.5 x 14.5
17.25 x 17.25
1 in = 2.54 cm
1 in = 25.4 mm
1 ft3 = 28.32 L
1.25 (35.4)
2.25 (63.7)
17.25 x 15.75 15.75 x 15.75
Note: All sealed box airspace should be filled to 50% loose poly-fil stuffing. Please allow two weeks of break-in time for the Comp
subwoofer to reach optimum bass performance.
Comp Ported (Vented) Enclosure Applications
Ported Comps? Absolutely...and with a vengeance! These enclosures incorporate huge tube ports with high-impact air velocities for
sheet metal bending street bass that will make your “skin bounce on your bones!” These boxes are the enclosure of choice for outra-
geous street bass and high performance SPL contests.
The ported Compact design increases bass efficiency and fits in many space-limited applications. Although it is the smallest
recommended ported enclosure, the output from 30 to 80 Hz will be considerably higher than that of any sealed box. The two other
ported designs have proportionately more output in this crucial frequency band.
The SPL / Deep Bass is the largest and most efficient enclosure design. The SPL / Deep Bass delivers the sonic output needed to
win SPL contests and it produces bass notes “all the way down to tha cella”. This design turns heads and jump starts your heart.
If space is not a problem and you want to get the most from your Comp, try one of these ported designs. You will not be
disappointed.
The following page shows a chart with the three Recommended Rectangular Port Enclosure sizes for each Comp driver.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Comp Subwoofers
Recommended Rectangular Port Enclosures – High Efficiency
Model
Compact
SPL / Deep Bass
.66 ft3 (18.7 L) + port displacement
1.5” x 8" port, 18" long
1.2 ft3 (34.0 L) + port displacement
1.5” x 8" port, 12.25" long
C8
(3.8cm x 20.3cm port, 45.7cm long)
Power Handling = 55W RMS
(3.8cm x 20.3cm port, 31.1cm long)
Power Handling = 55W RMS
C10
1.25 ft3 (35.4 L) + port displacement
1.5” x 10.5” port, 14.5” long
1.75 ft3 (49.6 L) + port displacement
1.5” x 10.5” port, 13.25” long
(3.8cm x 26.7cm x port, 36.8cm long)
Power Handling = 150W RMS
(3.8cm x 26.7cm port, 33.7cm long)
Power Handling = 150W RMS
1.75 ft3 (49.6 L) + port displacement
2.0” x 12.5” port, 16” long
2.25 ft3 (63.7 L) + port displacement
2.0” x 12.5” port, 16.375” long
C12
C15
(5.1cm x 31.8cm port, 40.6cm long)
Power Handling = 150W RMS
(5.1cm x 31.8cm port, 41.6cm long)
Power Handling = 150W RMS
4.0 ft3 (113.3 L) + port displacement
3.0” x 15.5” port, 16.5” long
3.0 ft3 (85.0 L) + port displacement
2.75” x 15.5” port, 17” long
(7.6cm x 39.4cm port, 41.9cm long)
Power Handling = 250W RMS
(7.0cm x 39.4cm port, 43.2cm long)
Power Handling = 250W RMS
Note: The use of a subsonic filter will significantly increase the power handling. The power handling specifications in this chart are calculated using a 25 Hz, 24 dB per
octave subsonic filter. All specifications and performance figures are subject to change. Please visit kicker.com for the most current information.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Comp Subwoofers
WHAT IS NOT COVERED?
Acoustics LIMITED WARRANTY
This warranty is valid only if the product is used for the purpose for which it was
designed.
It does not cover:
Kicker warrants this product to be free from defects in material and workmanship
under normal use for a period of THREE (3) MONTHS from date of original
purchase with receipt. When purchased from an Authorized KICKER Dealer it is
warranted for ONE (1) YEAR from date of original purchase with receipt. In all cases
you must have the original receipt! Should service be necessary under this
warranty for any reason due to manufacturing defect or malfunction during the
warranty period, Kicker will repair or replace (at its discretion) the defective
merchandise with equivalent merchandise at no charge. Warranty replacements may
have cosmetic scratches and blemishes. Discontinued products may be replaced
with more current equivalent products.
•
•
•
Damage due to improper installation.
Subsequent damage to other components.
Damage caused by exposure to moisture, excessive heat, chemical cleaners,
and/or UV radiation.
Damage through negligence, misuse, accident or abuse. Repeated returns for
the same damage may be considered abuse.
•
•
•
•
•
•
•
•
•
•
Any cost or expense related to the removal or reinstallation of product.
Speakers damaged due to amplifier clipping or distortion.
Items previously repaired or modified by any unauthorized repair facility.
Return shipping on non-defective items.
Products with tampered or missing bar code labels.
Products returned without a Return Authorization (RMA) number.
Freight Damage.
This warranty is valid only for the ORIGINAL PURCHASER and is not extended to
owners of the product subsequent to the original purchaser. Any applicable implied
warranties are limited in duration to a period of the express warranty as provided
herein beginning with the date of the original purchase at retail, and no warranties,
whether express or implied, shall apply to this product thereafter. Some states do
not allow limitations on implied warranties, therefore these exclusions may not apply
to you. This warranty gives you specific legal rights; however you may have other
rights that vary from state to state.
The cost of shipping product to Kicker.
Service performed by anyone other than Kicker.
WHAT TO DO IF YOU NEED WARRANTY OR SERVICE
Defective merchandise should be returned to your local Authorized Stillwater
Designs (Kicker) Dealer for warranty. Assistance in locating an Authorized Dealer
can be obtained by writing, calling, or by visiting kicker.com. You can confirm that a
dealer is authorized by asking to see a current authorized dealer window decal.
HOW LONG WILL IT TAKE?
Kicker strives to maintain a goal of 24-hour service for all acoustics (subwoofers,
midrange drivers, tweeters, crossovers, etc) returns. Delays may be incurred if lack
of replacement inventory or parts is encountered.
If it becomes necessary for you to return defective merchandise directly to
Stillwater Designs (Kicker), call the Kicker Customer Service Department at
(405) 624-8510 for a Return Authorization (RMA) number. Package all defective
items in the original container or in a package that will prevent shipping damage,
and return to:
INTERNATIONAL WARRANTY
Contact your International Kicker dealer or distributor concerning specific
procedures for your country’s warranty and service policies.
Stillwater Designs, 5021 North Perkins Road, Stillwater, OK 74075
The RMA number must be clearly marked on the outside of the package. Please
return only defective components (subwoofer, speaker-wire connector, etc.). The
return of functioning items increases your return freight charges. Non-defective items
received will be returned freight collect.
P.O. Box 459 • Stillwater, Oklahoma 74076 • U.S.A. • 405 624-8510
KICKER drivers are capable of producing sound levels
that can permanently damage your hearing! Turning up a
system to a level that has audible distortion is more
damaging to your ears than listening to an undistorted
system at the same volume level. The threshold of pain
Include a copy of the original receipt with the purchase date clearly visible, and a
“proof-of-purchase” statement listing the Customer’s name, Dealer’s name and
invoice number, and product purchased. Warranty expiration on items without proof-
of-purchase will be determined from type of sale and the manufacturing date code.
Freight must be prepaid; items sent freight collect, or COD, will be refused.
is always an indicator that the sound level is too loud and
WARNING:
may permanently damage your hearing.
Failure to follow these steps may void your warranty. Any questions can be
directed to the Kicker Customer Service Department at (405) 624-8510.
Please use common sense when controlling volume!
Download from Www.Somanuals.com. All Manuals Search And Download.
08102005+05C
10
Comp Subwoofers
Notes
Tech Lines
Download from Www.Somanuals.com. All Manuals Search And Download.
Comp Subwoofers
11
Download from Www.Somanuals.com. All Manuals Search And Download.
|