KTC-D500E
DIGITAL TV TUNER
INSTRUCTION MANUAL
C B64-3808-00/00 (E)
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety precautions
2WARNING
• Mounting and wiring this product requires skills and
experience. For safety’s sake, leave the mounting
and wiring work to professionals.
2CAUTION
• Make sure to ground the unit to a negative 12V DC
power supply.
• Use only the screws provided or specified for
installation. If you use wrong screws, you could
damage the unit.
• If your vehicle’s ignition does not have an ACC
position, or if the ignition wire is connected to
a power source with constant voltage such as a
battery wire, the power will not be linked with the
ignition (i.e., it will not turn on and off along with
the ignition). If you want to link the unit’s power
with the ignition, connect the ignition wire to a
power source that can be turned on and off with
the ignition key.
• If the fuse blows, first make sure the wires aren’t
touching to cause a short circuit, then replace the
old fuse with one with the same rating.
• After the unit is installed, check whether the brake
lamps, blinkers, wipers, etc. on the car are working
properly.
English
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
This Product is not installed by the manufacturer
of a vehicle on the production line, nor by the
professional importer of a vehicle into an EU Member
State.
Monitor units that can be connected to this
unit
• Å group
DNX7200
KVT-829DVD
KVT-729DVD
DDX8029
DDX7029
KOS-V500
Information on Disposal of Old Electrical
and Electronic Equipment (applicable for
EU countries that have adopted separate
waste collection systems)
Products with the symbol (crossed-out
wheeled bin) cannot be disposed as
household waste.
KOS-V1000
• ı group
DDX6029
KVT-827DVD
KVT-727DVD
KVT-627DVD
DDX8027
DDX6027
KVT-M707
• Ç group
LZ-760R
Old electrical and electronic equipment
should be recycled at a facility capable
of handling these items and their waste
byproducts. Contact your local authority
for details in locating a recycle facility
nearest to you. Proper recycling and waste
disposal will help conserve resources whilst
preventing detrimental effects on our
health and the environment.
• Î group
Unit with RCA video input
How to reset your unit
• If the unit fails to operate properly, press the Reset
button.
4
KTC-D500E
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Lets view some digital broadcasts.
A
A
B
B
C
Switching to Digital
TV Screen
Functions During Digital
TV Screen
Press [V.SEL] on the monitor to switch to Digital
TV Broadcasting.
Basic functions are available even when the TV
screen is displayed.
1
2
4
5
3
Preset
Mode : Fu l l
3
TV TV1
2ch
AV-IN
AUTO1
AV-OUT:
6
1 Picture Source Display Area
Displays the TV Status, Display Mode, and
AVOUT settings (page 13).
2 Channel Down Search Area
TV
TV1
2ch
IN
AF
AUTO1
Searches downward and selects the
channel.
3 Channel Up Search Area
⁄
Searches upward and selects the channel.
4 Menu Control Area (Å group only)
Displays the Menu Control screen (page 11).
5 Information Display Control Area
Turns ON/OFF the display of information
in the Picture Source Display Area 1 and
Source Information Display Area 2.
6 Audio Source Information Display Area
•
When you first switch to digital TV broadcasting, a
Welcome Menu appears and Auto Scan starts.
⁄
•
There are four ways to select the desired station.
When Auto Scan ends normally, a Channel List
containing channels available at the current location is
created and the first channel is displayed.
- By searching for available station
- By selecting from EPG (Electronic Program Guide) (page
10)
•
•
Auto Scan may have been performed already at the
dealer where the unit was installed.
The display language can be changed (page 13).
- By selecting from the Channel List (page 12)
- By specifying a channel number (page 11)
You can add the selected channel to the Channel List if it
is not already listed.
•
English
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
A
C
Touch Operation
Functions During Digital
TV Screen
Menu Control Screen appears by touching the
area shown below.
Basic functions are available even when the TV
screen is displayed.
1
3
2
6
1
2
3
MenuCtrl
EPG
Menu
Return
1 Channel Down Search Area
Searches downward and selects the
channel.
6
6
2 Control Screen Display Area
Switches to Control Screen.
3 Channel Up Search Area
Searches upward and selects the channel.
4
6
5
Enter
Exit
⁄
1 Shows EPG Screen (page 10).
2 Shows DVB Menu Screen (page 11).
3 Returns to previous screen.
4 Executes selected menu item.
5 Returns to Digital TV Screen.
6 Moves highlight in DVB menu.
•
When the Control Screen is displayed, touch [OK] or wait
approximately 10 seconds. The Digital TV Screen will
reappear.
RCU
[List of abbreviations]
Remote Control Unit
CH
Channel
STB
Set Top Box
EPG
Normally this will be built in to the vehicle and it
will not be necessary for the user to access it.
Electronic Program Guide
OSD
On Screen Display
TV
Television
PIG
Picture in Graphic
6
KTC-D500E
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation (When connected with DDX7029 Å)
Various control screens appear in the Digital TV Source mode. (You can only operate Digital TV with the
optional accessory Digital TV Tuner connected.)
Functions When Displaying the Easy
Control Panel
Functions While Displaying the Control
Screen
Displays a floating control panel in the screen.
Switches to control screen to use various playback
functions.
TV
2ch
AV-IN
Mode : Fu l l
AV-OUT:
TV
2ch
AV-IN
Mode : Fu l l
AV-OUT:
TV
2ch
IN
TV
2ch
IN
SRC
SRC
TV
2ch
AV-OUT: AV-IN
SCRN
Mode : Fu l l
TV
2ch
AV-OUT: AV-IN
SCRN
3
Mode : Fu l l
1
2
2
SRC
TV
2ch
IN
SRC
TV
2ch
IN
1 Switches the source.
2 Select a channel.
SRC
3 Displays the Screen Control screen.
(page 7 for the <Functions While Displaying
the Control Screen>)
⁄
TV
•
The Easy Control Panel display is hidden when you touch
2ch
1
2
a central area of the monitor.
1
IN
LOUD
1 Select a channel.
2 Channel Number Display
English
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation (When connected with DDX6029 ı)
Various control screens appear in the Digital TV/ Video Source mode. (You can only operate Digital TV with
the optional accessory Digital TV Tuner connected.)
Displaying the Easy Control Panel
Displaying the TV Control screen
The Control Panel is displayed in a floating
position of the TV picture.
You can tune in a TV station using various
functions.
SRC
SRC
T V 1
P r e s e t
MODE:FULL AV-OUT:DVD
1
2 c h
T V
13:50
4
VIDEO
1
3
2
5
5
4
SCRN
TV
–
–
–
–
2 c h
Next
AME SEEK
T V 1 G ro u p 1 P r e s e t
1
1
2
3
3
SEEK
2 c h
SRC
VID
G r o u p 1
T V
TV
P r e s e t
1
AUTO1
1 Calls the Sound Effects Menu.
1 Switches the source.
2 Switches to Video (VIDEO).
3 Select a channel.
4 Displays the Screen Control screen.
(page 8 for the <Displaying the TV Control
screen>)
2 Displays the Source Select screen.
3 Calls the Setup Menu.
4 Switches to VIDEO.
5 Select a channel.
⁄
⁄
•
Buttons other than mentioned above are disabled in DVB
mode.
•
The Easy Control Panel display is hidden when you touch
a central area of the monitor.
•
Buttons other than mentioned above are disabled in DVB
mode.
8
KTC-D500E
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation (When connected with LZ-760R Ç)
Various control screens appear in the Digital TV Source mode. (You can only operate Digital TV with the
optional accessory Digital TV Tuner connected.)
Functions While Displaying the Control
Screen
You can tune in a TV station using various
functions.
1
1
2
1 Select a channel.
2 Closes Control Screen and shows Digital TV
screen.
⁄
•
Buttons other than mentioned above are disabled in DVB
mode.
English
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Displaying EPG
Receiving and displaying EPG (Electronic Program Guide) sent together with a program.
Viewing the Program Guide
You can check the programs on each channel in the
EPG (Electronic Program Guide).
1
2
Show EPG by pressing [EPG] key
EPG appears.
Select the channel or time to display
On the EPG, you can change the displayed
channel by touching [5] or [∞] and time frame
by touching [2] or [3].
3
Touch [Return] (
) when you are finished
⁄
•
A "no data" message will be displayed if the selected
channel does not provide EPG data.
•
It can also be displayed from the Menu Control screen.
10
KTC-D500E
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel Search and Channel List
The available stations (TV/Radio) are saved in the Channel List.
Searching for currently available station
(Auto Scan)
Manually Searching Station
(Manual Search)
Search for currently available stations and save
them in the Channel List.
Search a station by specifying area or channel.
1
2
Show DVB Menu by pressing [MENU] key
1
2
Show DVB Menu by pressing [MENU] key
Touch [5] or [∞], select [Channel Search]
Touch [5] or [∞], select [Channel Search]
3
4
5
6
Touch [3]
3
4
5
Touch [3]
Touch [5] or [∞], select [Manual Search]
Touch [5] or [∞], select [Auto Scan]
Touch [Enter] (
)
Touch [Enter] (
)
Touch [5], [∞], [2], or [3] to select TP
Number, bandwidth, frequency, or CH
number
Channel search is performed and the available
channel is saved in the channel list.
⁄
•
When you perform Auto Scan, the content of the current
channel list is discarded and a new list is created.
To search for available channels without discarding the
content of the current channel list, perform channel
search from the Digital TV Screen (page 5).
⁄
•
Manual search is for advanced users and offers the
ability to search for specific channels. Regular users are
recommended to use "Auto Scan" (page 11).
English
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel Search and Channel List
Selecting a station from Channel List
Erasing Channel List
Stations that are available by Auto Scan or other
methods are saved in the Channel List.
Erase channels registered in the Channel List.
1
2
Show DVB Menu by pressing [MENU] key
1
2
Show DVB Menu by pressing [MENU] key
Touch [5] or [∞], select [CH Manager]
Touch [5] or [∞], select [CH Manager]
3
4
Touch [3]
3
4
Touch [3]
Touch [5] or [∞], select [Erase All
Channels]
Touch [5] or [∞], select [TV Channel List]
or [Radio Channel List]
5
6
Touch [Enter] (
)
5
Touch [Enter] (
)
A confirmation message appears.
The Channel List appears and the program of
the currently selected station appears in the
PIG (Picture in Graphic) screen. In addition
Channel Information is shown underneath the
PIG screen.
Touch [Enter] (
)
6
Touch [5] or [∞] to select a channel
All channels in the Channel List are erased.
⁄
•
After Deleting all the Channels pressing TV Channel List
or Radio Channel List will cause a message box to be
displayed: No TV Channel List or No Radio Channel List.
When you move the cursor down the channel
list, the PIG screen will change accordingly.
7
Touch [Enter] (
)
The received channel is switched.
12
KTC-D500E
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
Setting this unit's behavior and clock.
1
2
Show DVB Menu by pressing [MENU] key
System Setup
Set the behavior of this unit such as the display
language and aspect ratio.
Touch [5] or [∞], select [Setup]
The following items can be set:
OSD Language
User could select the desired language.
This function provides 4:3 and 16:9 two ratio
for user to select. If your display supports 16:9
screen format and selected channel provides
16:9 format program, select 16:9.
TV Aspect Ratio
There are four screen format could be selected,
Full, Pan&Scan, Letter Box, and Combined.
TV Screen Format
User could set the auto switching interval time
from OFF to 30 Seconds when the box cannot
receive the video signal. User also could use the
[A] to [Z] key on the RCU to switch the signal
immediately.
3
4
5
Touch [3]
Auto Switching
Interval
Touch [5] or [∞], select [System Setting]
Select the TV signal type (PAL or NTSC)
according to the display.
Touch [Enter] (
)
TV Type
0/5 Volt
System Setup Menu appears.
Set "0/5 Volt" ON when connecting an antenna
with booster amplifier to this unit.
6
7
Touch [5] or [∞] to select the item to set
This function provide user to select the unit at a
power on mode or a stand by mode. If the user
select the unit at power on mode, when user
turn on the car, then the unit will be turned on
at the same time.
Touch [2] or [3] to select the value to set
Power On Option
If user connect to an amplifier, user could use
Volume Rate Control the volume rate to control the volume. There
are 18 levels could be selected.
⁄
•
Depending on the country where you buy your receiver,
some functions might not be available in this menu.
If you changed the "0/5 Volt" setting, perform Auto Scan.
•
8
Touch [Return] (
) when you are finished
English
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
Setting the Clock
Updating the Software
Set the clock to the network. Also set the time
zone and summer time as necessary.
Download the new software from the network
and update the software installed in this unit.
1
2
Show DVB Menu by pressing [MENU] key
1
2
Show DVB Menu by pressing [MENU] key
Touch [5] or [∞], select [Setup]
Touch [5] or [∞], select [Setup]
3
4
5
Touch [3]
3
4
Touch [3]
Touch [5] or [∞], select [Clock Setting]
Touch [5] or [∞], select [Software
Upgrade]
Touch [Enter] (
)
5
Touch [Enter] (
)
Clock Setting menu appears.
If there is a new software, it is downloaded and
this unit's software is updated.
6
Touch [2] or [3] to select the value to set
⁄
•
This function is only available when the network
supports this feature.
•
When new software is loaded, this might have different
functions than the software you are using now. This
manual might not be accurate anymore for the new
software version.
7
Touch [Return] (
) when you are finished
⁄
•
Real-time data (Year, Month, Date, and Hour) will
automatically be downloaded when the Clock Setting
Menu is shown.
14
KTC-D500E
Download from Www.Somanuals.com. All Manuals Search And Download.
Restoring to Factory Default
Restore this unit's settings to factory default.
1
2
Show DVB Menu by pressing [MENU] key
Touch [5] or [∞], select [Setup]
3
4
Touch [3]
Touch [5] or [∞], select [Factory Default]
A confirmation message appears.
5
Touch [2] or [3] to show [OK]
6
Touch [OK]
English
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Information and Conax
Displaying information and setting Conax.
Displaying Information
Setting CA Control
Display various system information, smart card
expiration date, and Conax information.
Set channel access control (CA Control) for
channels broadcasting programs of specific
genre.
1
2
Show DVB Menu by pressing [MENU] key
1
2
Show DVB Menu by pressing [MENU] key
Touch [5] or [∞], select [Info & Conax.]
Touch [5] or [∞], select [Info & Conax.]
3
4
Touch [3]
3
4
5
Touch [3]
Touch [5] or [∞] to select the information
to display
Touch [5] or [∞], select [CA Control]
5
Touch [2] or [3]
Touch [Enter] (
)
CA Control screen appears.
6
Touch [5] or [∞] to select an item and
enter a value
The selected information is displayed.
7
Touch [Enter] (
)
16
KTC-D500E
Download from Www.Somanuals.com. All Manuals Search And Download.
⁄
•
This function is not available unless a card is inserted.
•
You can change the [Card Level] by touching [2] or [3].
However, you must enter a password when [Enter CA PIN:]
appears to change the Card Level setting.
•
To change the password, enter the current password for
[Enter CA PIN:] and new password for [Enter New CA PIN:]
and [Confirm new CA PIN:].
English
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Unit
EPG
INFO
MUTE
POWER
SUB
TITLE
MENU
TV/RADIO
EXIT
LANG
TIMER
AUDIO
PREVIEW
A
Z
AUTO
SCAN
SIGNAL
%
INFO
5/∞
Current channel info (toggle between pages in
menu using 5/∞/2 / 3).
a. Changes channels (channel up, channel
down).
b. Toggles between menu items (up/down).
EPG
Opens the Electronic Program Guide.
2/3
Toggles between menu items (left/right).
POWER
Powers the (STB) unit on and off.
OK
Verifies input.
MUTE
Mutes the sound. Volume mute only works
in TV/Radio mode (i.e. not when a menu is
opened).
EXIT
a. Return to the previous menu in menu screen
or escape from menu.
b. Return to normal TV mode from a menu.
Repeated pressing will take you through
all opened menus until normal TV mode is
reached.
MENU
Press once to enter Main Menu.
The Main Menu consists of 4 sub-menus.
– CH Manager
– Channel Search
– Setup
SUBTITLE
Switches to Subtitle Mode.
– Info & Conax.
18
KTC-D500E
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading battery
Page up
Use one lithium battery (CR2025).
Insert the batteries with the + and – poles aligned
properly, following the illustration inside the case.
a. TV/radio mode
b. Page down
3 Replace the battery
LANG
BA
T
TR
BA
Y
T
BA
T
BA
TR
Y
TR
Y
T
TR
BA
Switches language.
TIMER
Sleep timer.
1 Keep on slide
Press to set different times.
AUDIO
Audio modes.
2 Pull out
2WARNING
•
Store unused batteries out of the reach of children.
Contact a doctor immediately if the battery is
accidentally swallowed.
Switches to teletext.
0 – 9
¤
a. Selects a channel to watch. Press two
numbers one after the other to go beyond 9
(e.g. press 2 and then 3 to go to channel 23).
•
Do not set the remote control in hot places such as on
the dashboard.
b. Selects a sub-menu item.
38
Pauses/resumes TV streaming images.
Returns to the channel you were watching
previously.
PREVIEW
Previews image display.
A-Z
Changes to alternative frequency.
AUTOSCAN
Searches the network for available channels.
SIGNAL%
Signal power/quality bar
English
19
Download from Www.Somanuals.com. All Manuals Search And Download.
List of Accessories
4 Remote Control
1 Digital TV Tuner............... 1
5 TV Interface Cable......... 1
9 Screw (ø4×16mm)........ 4
2 Remote Control Unit... 1
3 Wiring harness................. 1
Receiver .................................1
6 Bracket.................................. 2
7 Card Slot Cover ............... 1
8 Screw (M3×4mm)............6
20
KTC-D500E
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Digital TV Tuner
The Digital TV Tuner (main unit) can be installed by securing it to the pile carpet with Velcro or by screwing
it on to a commercially available audio board.
Installing the Main Unit
• There are various terminals on the main unit. Leave
some space to connect cables on the terminal side
of the main unit.
• Do not place anything on top of the main unit. This
can cause product failure.
• Do not install the main unit stacked with other
units.
• Install the main unit at least 1.5m away from radio
antenna.
Installing with Screw
Screw (M3×4mm) 8
1
Use a tapping screw to secure the bracket to the
vehicle's audio board (commercial product).
Screw (ø4×16mm) 9
¤
•
When drilling holes in the vehicle, be sure there is
nothing on the other side.
Bracket 6
Bracket 6
Damage to cables or pipes can cause accident or
malfunction.
Screw
(M3×4mm) 8
Digital TV Tuner 1
Audio board
(commercial product)
English
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Connecting the Remote Control Receiver
Paste the remote control receiver to the dashboard.
1
2
Remove the paper from double-stick tape
and paste it on the back of the remote control
receiver.
Remote control receiver 4
Wipe the dirt and oil off from the installation area
and paste the remote control receiver 6 to the
dashboard.
3
Connect the connectors of the remote control
receiver to the main unit.
⁄
•
Wipe oil and dirt off from the installation surface.
Avoid area where there is direct sunlight or close to TV
monitor because the remote control signals may be
affected.
•
Remote control
receiver 4
Digital TV Tuner 1
22
KTC-D500E
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting Pay Card
Insert the Pay Card into the card slot, and attach
the card slot cover.
Screw (M3×4mm) 8
Card Slot Cover 7
Digital TV Tuner 1
English
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection
Connect the monitor and power as follows.
Set S position when connecting
by AV Cable (RCA).
Set C position when connecting by
Kenwood TV Interface Cable.
To AV input of the monitor Î
Digital TV Tuner 1
Ground wire (Black) - (To car chassis)ꢀ C
Fuse (5A)
Battery wire (Yellowꢀ) B
Fuse (3A)
Ignition wire (Red)
ꢀ A
To the center unit
such as a DVD
receiver. ÅıÇ
Wiring harness 3
• 75Ω
• F connector
• For VHF/UHF
TV Interface Cable 5
⁄
Connection of antenna with booster
amplifier
Set "0/5 Volt" ON when connecting an
antenna with booster amplifier to this unit.
Ignition key switch
ACC A
B
Car fuse box
(Main fuse)
Car fuse box
C
+
–
+
Battery
24
KTC-D500E
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
TV tuner
Input Frequency
VHF : 174 – 230 MHz
UHF : 470 – 862 MHz
Demodulation Type
: QPSK/ 64QAM/ 16QAM
Channel Bandwidth
: 6/ 7/ 8 MHz
FFT Size
: 2K and 8K
Guard Interval
: 1/4, 1/8, 1/16, 1/32
Puncture Rate
: 1/2, 2/3, 3/4, 5/6, 7/8
Antenna input
: 2-ch Diversity
Connector Type
: F Type × 2
General
Operating Voltage (11 – 16V)
: 14.4 V
Current Consumption
: 860 mA
Dimensions (W × H × D) (Main unit)
: 215 × 37 × 172.4 mm
Operational temperature range
: -10°C ~ +60 °C
Storage temperature range
: -30°C ~ +85 °C
Weight
: 1.2 kg
English
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|