AUDIO VIDEO SURROUND RECEIVER
-
VR 7070
INSTRUCTION MANUAL
KENWOOD CORPORATION
About the supplied remote control
Compared to standard remote controls, the remote control supplied with this receiver has several
operation modes. These modes enable the remote control to control other audio/video components. In
order to effectively use the remote control it is important to read the operating instructions and obtain a
proper understanding of the remote control and how to switch its operation modes (etc.).
Using the remote control without completely understanding its design and how to switch the operation
modes may result in incorrect operations.
B60-5343-00 00 MA (K, P)
0209
Download from Www.Somanuals.com. All Manuals Search And Download.
Before applying the power
Contents
Unpacking
Caution : Read the pages marked
safe operation.
carefully to ensure
Unpack the unit carefully and make sure that all accessories are present.
FM indoor antenna (1)
AM loop antenna (1)
Before applying the power .............................. 2
Safety precautions ............................................. 2
How to use this manual..................................... 2
Unpacking .......................................................... 3
Preparing the remote control ............................ 4
Special features ................................................. 5
Names and functions of parts ......................... 6
Main Unit ........................................................... 6
Remote control unit (1)
RC-R0820
Batteries (R6/AA) (2)
Remote control unit ...............................................
7
Setting up the system........................................ 8
Connecting the terminals .................................. 9
Connecting audio components........................ 10
Connecting video components........................ 11
Digital connections .......................................... 12
Connecting video components
(COMPONENT VIDEO) .................................... 13
Connecting a DVD player (6-channel input)..... 14
Connecting the speakers ................................. 15
PRE OUT connections ..................................... 16
Connecting to another room (ROOM B) ......... 17
Connecting the external IR repeater ............... 18
Connecting to the AV AUX jacks ..................... 19
Connecting the antennas................................. 19
Connecting the system control ....................... 20
Preparing for surround sound ....................... 21
Speaker settings .............................................. 21
Preparations
If any acccessories are missing, or if the unit is damaged or fails to
operate, notify your dealer immediately. If the unit was shipped to you
directly, notify your shipper immediately. Kenwood recommends that
you retain the original carton and packing materials in case you need to
move or ship the unit in the future.
Keep this manual handy for future reference.
Normal playback.............................................. 24
Preparing for playback ..................................... 24
Listening to a source component .................... 24
Adjusting the sound ......................................... 25
Recording .......................................................... 27
Recording audio (analog sources) ................... 27
Recording video ............................................... 27
Recording audio (digital sources) .................... 27
Listening to radio broadcasts ....................... 28
Tuning radio stations ....................................... 28
Presetting radio stations manually .................. 28
Receiving preset stations ................................ 29
Receiving preset stations in order (P.CALL) ... 29
Ambience effects ............................................. 30
Surround modes .............................................. 30
Surround play ................................................... 33
DVD 6-channel playback .................................. 34
Convenient functions....................................... 35
Operations
Basic remote control operations for other
components....................................................... 38
Registering setup codes for other
components ..................................................... 38
Searching for your code................................... 38
Checking the codes ......................................... 39
Re-assigning device keys ................................ 39
Operating other components .......................... 39
Storing the remote control of the other
Remote Control
components ..................................................... 40
Setup code chart.............................................. 41
CASSETTE deck, CD player & MD recorder
operations ........................................................ 46
Other components’ operations ....................... 47
Additional
Information
In case of difficulty.......................................... 49
Specifications .................................................. 51
EN
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Before applying the power
Preparing the remote control
For the U.S.A.
FCC WARNING
Loading the batteries
This equipment may generate or use radio frequency energy.
Changes or modifications to this equipment may cause harmful
interference unless the modifications are expressly approved in
the instruction manual. The user could lose the authority to
operate this equipment if an unauthorized change or modification
is made.
1 Remove the cover.
2 Insert the batteries.
NOTE:
Thisequipmenthasbeentestedandfoundtocomplywiththelimits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
may cause harmful interference to radio communications, if it is not
installed and used in accordance with the instructions. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
– – Reorient or relocate the receiving antenna.
3 Close the cover.
• Insert two AA-size (R6) batteries as indicated by the polarity
markings.
– – Increase the separation between the equipment and receiver.
– – Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
– – Consult the dealer or an experienced radio / TV technician for
help.
Operation
When the STANDBY indicator is lit, the power turns ON when you press
the POWER RCVR key on the remote control. When the power comes
ON, press the key you want to operate.
For the U.S.A.
Operating range
(Approx.)
Remote sensor
Note to CATV system installer
This reminder is provided to call the CATV system installer's
attention to Article 820-40 of the NEC that provides guidelines for
proper grounding and, in particular, specifies that the cable ground
shall be connected to the grounding system of the building, as
close to the point of cable entry as practical.
6 m
POWER RCVR
®
As an ENERGY STAR
Partner,
KenwoodCorporationhasdeterminedthat
Infrared ray system
®
this product meets the ENERGY STAR
guidelines for energy efficiency.This
product can save energy. Saving energy
reduces air pollution and lowers utility bills.
• When pressing more than one remote control key successively, press the
keys securely by leaving an interval of 1 second or more between keys.
Notes
1. The supplied batteries may have shorter lives than ordinary batteries
due to use during operation checks.
2. When the remote-controllable distance gets shorter than before,
replace both batteries with new ones.
3. Placing the remote sensor in direct sunlight, or in direct light from a
high frequency fluorescent lamp may cause a malfunction.
In such a case, change the location of the system installation to
prevent malfunction.
EN
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Before applying the power
Special features
SRS Circle Surround
True home theater sound
II
SRSCircleSurroundII™improvesonitspredecessorCS-5.1™resulting
intheCS-6.1™system, enablingyoutolistentorealistic, multi-channel,
surroundsoundplaybackfromastereosourceorconventionalsurround-
encoded video source. You already enjoy listening to Dolby Digital /DTS
multi-channel sound with your multi-speakers. Now you can listen to
audio CDs, MDs, Broadcast and Home Theater using your multi-
speakers. You will discover a new type of sound through SRS Circle
Surround II.
This receiver incorporates a wide variety of surround modes to bring you
maximum enjoyment from your video software. Select a surround mode
according to your equipment or the software you are going to play and
enjoy!
º
THX
THX mode activates proprietary THX features that help recreate the
cinematic experience in a home environment.
¤
DSP surround modes
THX Surround EX
The DSP (Digital Signal Processor) used for this receiver incorporates
a variety of high quality adjustable sound fields, like “ARENA”, “JAZZ
CLUB”, “THEATER”, “STADIUM” and “DISCO”. It is compatible with
almost any kind of program source.
During THX Surround EX mode, film soundtracks that have been
encodedwithDolbyDigitalSurroundEXtechnologyareabletoreproduce
an extra channel which has been added during the mixing of the
program. This channel is called Surround Back.
THX Surround EX mode activates proprietary THX features that help
recreate the cinematic experience in a home environment.
DVD 6-channel input
If you own a DVD player equipped with 6-channel output, this receiver
allows you to obtain the full surround sound impact of DVD source
material featuring multi-channel encoding. Since the source signals are
digital and each channel is input independently, the resulting ambience
is far superior to what can be achieved with conventional surround
sound systems.
Dolby Digital and Dolby Digital EX
The DOLBY DIGITAL mode lets you enjoy full digital surround from
software processed in the Dolby Digital format. Dolby Digital provides
up to 5.1 channels of independent digital audio for better sound quality
and more powerful presence than conventional Dolby Surround.
As for Dolby Digital EX, it creates six full-bandwidth output channels
from the 5.1 channel sources. This is done using a matrix decoder that
derives three surround channels from the two in the original recording.
Forbestresults,DolbyDigitalEXshouldbeusedwithmoviesoundtracks
recorded with Dolby Digital Surround EX.
ACTIVE EQ
ACTIVE EQ mode will produce a more dynamic sound quality in any
condition. You can enjoy a more impressive sound effect when ACTIVE
EQ is turned on during Dolby Digital and DTS playback.
SPEAKER EQ
SPEAKER EQ function is to adjust the receiver’s audio output
characteristics with the speakers’ characteristics which differs
depending on the size of the speakers. Especially for the music sound
source playback, the reproduced sound becomes more natural when
adjusting the output characteristics. When activating the SPEAKER EQ
function, you will be able to enjoy a more natural and dynamic sound
experience even with small size speakers.
Dolby PRO LOGIC
II
DOLBY PRO LOGIC II, whilst totally compatible with its predecessor
PRO LOGIC, provides greater advantages in surround sound. It allows
the user to enjoy the conventional stereo or Dolby Surround with a
convincing“5.1like”presentation.PROLOGICII offersspecialfeatures
for controlling the overall spatial, dimensionality and frontal sound field
imaging. PRO LOGIC II produces an impressive surround sound from
video software marked
from music CD. When listening to music, you will be able to enjoy the
experience of sheer STEREO surround sound.
and three-dimensional space
Universal IR (InfraRed) remote control
In addition to the basic receiver, the remote control supplied with this
receiver can also operate almost all of your remote controllable audio
and video components. Just follow the simple setup procedure to
register the components you have connected.
DTS and DTS-ES
DTS (Digital Theater System) is a 5.1 channel digital audio format that
providesfivefullspectrumchannelsandonelow-frequency(subwoofer)
channel for unprecedented clarity, optimum channel separation and a
(wide) dynamic range.
DTS-ES (Extended Surround) presents 6.1 channels surround system
with additional Surround Back channel which evolved from the
conventional 5.1 channels surround system. DTS-ES format that was
recorded in DVD, CD or LD comprises of two modes. DTS-ES Discrete
6.1producethediscretesurroundbackwhichiscompletelyindependent
and DTS-ES Matrix 6.1 produces the surround back which synthesised
within the left and right surround channels using matrix technology.
DTS-ES has perfect compatibility with the conventional 5.1 channels
surround system. 6.1 channels surround with an additional surround
back presents a more natural presence and surround effects by
increasing the impression of the sound image from back.
Important:
When a DTS disc is played on a CD, LD or DVD player, noise may be
output from the analog output. It is recommended that you connect the
digital output of the player to the digital input of this unit.
Neo:6
Neo:6isanewtechnologywhichwasdevelopedbyDTS. Itcanproduce
high grade 6 channels surround with an astonishing fidelity from 2
channels content. Neo:6 has 2 mode, "CINEMA" mode is for movie
playback and "MUSIC" mode is for music playback.
EN
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Names and functions of parts
Main unit
Speaker
MUTE
CLIP
Input mode
Listen mode
indicators
indicators indicator indicator indicators
DTS DOLBY DIGITAL STEREO NEO:6
SP
MUTE OPTICAL 6CH INPUT
THX
AUTO DETECT
96kHzfs
AUTO indicator
MEMORY indicator
MATRIX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS CS II
Surround EX
L
C
SW
R
AUTO
MEMORY
STEREO
TUNED
LFE
STEREO indicator
TUNED indicator
SL
S
SB
SR
Speaker selection indicators
Input channel indicators
Output channel indicators
Frequency display
Input display
Preset channel display
Surround mode display
Display
VOLUME CONTROL
POWER
STANDBY
THX
DOLBY DIGITAL
SPEAKER EQ
ACTIVE EQ
DTS
ON/STANDBY
SPEAKERS
CS II
A
B
THX
SPEAKER EQ ACTIVE EQ
DSP
STEREO INPUT MODE DIMMER
DOWN
UP
MUTE
MULTI CONTROL
LISTEN MODE
DVD/6CH
CD/DVD
PHONO
TUNER
SOUND TONE SETUP
BAND AUTO MEMORY
AV AUX
S
VIDEO
VIDEO
L-AUDIO-R
PHONES
VIDEO
1
VIDEO
2
VIDEO
3
MD/TAPE
6 ACTIVE EQ key
Use to select ACTIVE EQ’s setting.
7 DSP key
Use to select any of the DSP mode.
8 STEREO key
Use to switch the listen mode to STEREO.
9 INPUT MODE key
Use to switch between the full auto, digital
and analog inputs.
0 DIMMER key
∞
‹
fi
* TONE key
Use to switch the status of TONE control.
( MEMORY key
Use to store radio stations in the preset
memory.
∞
1 POWER ON/STANDBY key
Use to turn the power ON/STANDBY.
STANDBY indicator
2 A SPEAKERS B keys
Use to turn the A/B speakers on or off.
3 THX key
Use to switch the status of THX.
4 SPEAKER EQ key
Use to select SPEAKER EQ’s setting.
5 Surround LED (lighting-emitting diode)
indicators
THX mode LED indicator
Lights when the THX mode has been chosen.
THX mode may or may not be activated
dependingupontheapplicableplaybackmode.
SPEAKER EQ mode LED indicator
Lights when the receiver is in the SPEAKER
EQ mode.
ACTIVE EQ mode LED indicator
Lights when the receiver is in the ACTIVE EQ
mode.
DOLBY DIGITAL mode LED indicator
‹
Lights when the receiver is in the Dolby
Digital mode.
DTS mode LED indicator
Lights when the receiver is in the DTS mode.
CSII mode LED indicator
¡
¢
•
) SETUP key
¡
‹
8
Use to select the speakers' settings etc.
¡
keys
¡
∞
Use for selection adjustments during sound,
set up and preset channel functions.
™ MULTI CONTROL knob
Use to control a variety of settings.
£ LISTEN MODE knob
Use to select the listening mode.
¢ AV AUX (S VIDEO, VIDEO, L-AUDIO-R)
jacks
∞ AV AUX key
Use to switch the input to AV AUX.
Use to select the REC MODE.
Use to adjust the brightness of the display.
¶
¡
›
‡
¢
∞
‹
! VOLUME CONTROL knob
@ MUTE key
Use to temporarily mute the sound.
# PHONES jack
Use for headphone listening.
$ Input Selector keys
(DVD/6CH, CD/DVD, PHONO, TUNER,
VIDEO 1, VIDEO 2, VIDEO 3, MD/TAPE)
Use to select input sources.
% SOUND key
Use to adjust the sound quality and the
ambience effects.
^ BAND key
Use to select the broadcast band.
& AUTO key
Use to select the auto or manual tuning
mode.
(
(
§
§
¢
§
fi
•
•
‹
‹
Lights when the receiver is in the CIRCLE
SURROUND II mode.
Standby mode
While the standby indicator is lit, a small amount of power is supplied to the system to back up the memory. This is called standby mode. Under the
condition, the system can be turned ON by remote control unit.
EN
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Names and functions of parts
Remote control unit
This remote control unit can be use not only for Kenwood products but also for other non-Kenwood products by setting the appropriate manufacturer’s
setup codes.
q
(
DVD
6CH
CD
TUNER
VID3
VID1
VID2
DVD
1
MD
TAPE
AV AUX
)
PHONO
TV
POWER
RCVR
¡
™
P
o
w
ow
V P
C
e
r
R
S
e
T
2
3
4
0
5
3
6
Multi
Enter
2
7
£
¢
Multi
1
8
9
+
10
+ 100
TV Mute
∞
4
5
6
Page
Return
Exit
OSD
LAST
/A/B
Guide
Disc Skip
Menu
§
Disc Sel.
Mute
Input Sel.
¶
•
¢
Tone
+
+
VOL
7
8
9
CH
Sound
ª
º
4
–
–
Bass
Boost
TV
VOL
TV Input
–
+
Tune
–
Band
Auto
Tune
+
0
!
@
#
$
%
^
&
⁄
¤
‹
›
Dimmer
Top Menu
Setup
Info/Flip
Loudness
If the name of a function is different on
Listen Mode
Speaker
EQ
DSP
the receiver and on the remote control,
the name of the remote control key in
this manual is indicated in parentheses.
Stereo
Mode
Input
Mode
Active
EQ
Learn
THX
fi
fl
*
1 Sourcekeys(MD/TAPE, CD/DVD,DVD/6CH,
TUNER, VID1, VID2, VID3, AV AUX, PHONO)
Whenpressandholdformorethan3seconds,
they are used to select the registered
¢ Page 5/∞ key
9 TV VOL +/– keys
Use to operate the DVD component.
∞ OSD (on screen display) key
Use to operate the DVD component.
Guide key
Use to operate other components.
§ Menu key
Use to operate other components.
¶ Mute key
Use to temporarily mute the sound.
• Tone key
Use to switch the status of TONE control.
Sound key
Use to adjust the sound quality and the
ambience effects.
ª VOL +/– keys
Use to adjust the receiver’s volume.
º Bass Boost key
Use to select the maximum adjustment
setting for the low frequency range.
⁄ ÷ key
Use to adjust the TV’s volume.
0 1/¡ keys
If CD, MD or Tape is selected as the input
source, this key functions as search keys.
Tune – / + keys
components.
°
Input Selector keys (MD/TAPE, CD/DVD, DVD/
6CH, TUNER,VID1,VID2, VID3,AVAUX, PHONO)
When press and release in less than 3 seconds,
Use to operate the tuner mode.
! 8 key
Use to operate other components.
Dimmer key
Use to adjust the brightness of the display.
@ 3/8key
If CD is selected as the input source, this key
functions as the play/pause key.
IfMDorTAPEkeyisselectedasinputsource,
this key functions as the play key.
Band key
Use to select the broadcast band.
# 2 key
If Tape is selected, this key functions as
reverse play key.
Info/Flip key
they are used to select the input sources.
2 SRC ( source) Power key
ª
∞
‡
Use to turn the other source components on
or off.
∞
3 Numeric keys
°
fi
Provide functions identical to those of the
original remote control supplied with the
component you are controlling.
¢
Multi (multi control) %/fi keys
Use to control a variety of settings.
Use to operate other components.
P.Call @/# keys
¡
•
∞
ª
Use for selection adjustments during sound,
set up and preset channel functions.
Enter key
Use to operate other components.
4 Return key
Use to operate the DVD component.
Exit key
Use to operate other components.
5 Disc Skip key
If CD is selected as the input source, this key
functions as the multi-CD player disc skip key.
LAST/ A/B key
If TAPE is selected as the input source, this is
A and B deck of a double cassette deck.
Use to operate other components.
6 Disc Sel. key
Use to operate other components.
Input Sel. key
Use to operate other components.
7 CH +/– keys
If MD or Tape is selected, this key functions
as record key.
Use to operate other components.
If VCR is selected, this key functions as
record key whe it pressed twice sequentially.
Top Menu key
$ Listen Mode 5/∞ keys
Use to select the listening mode.
% DSP Mode key
‹
‹
∞
Use to operate the DVD component.
Use to select any of the DSP mode.
^ Active EQ key
Use to select ACTIVE EQ’s setting.
& THX key
Use to switch the status of THX.
* Stereo key
Setup key
¡
Use to select the speakers’ settings etc.
¤ Loudness key
∞
Use to switch the status of LOUDNESS.
‹
fi
‹ Speaker EQ key
∞
Use to select SPEAKER EQ’s setting.
› 7 key
Use to switch the listen mode to STEREO.
( LCD (Liquid Crystal Display)
) TV key
If CD, MD, or TAPE is selected as the input
source, this key functions as the stop key.
Auto key
Use to select the auto or manual tuning
mode.
fi Learn key
Use to register other components.
Use to memorise the operation of the other
remote controls.
fl Input Mode key
Use to switch between the full auto, digital
and analog inputs.
Use to select the TV equipment.
•
¡ POWER RCVR (receiver) key
Use to turn the receiver on or off.
™ TV Power key
¡
Use to turn the TV on or off.
£ +100 key
Use to select the disc number with the multi-
CD player.
TV mute key
Use to select the channels.
¢ / 4 keys
If CD, MD and DVD as the input source, these
keys function as skip keys.
8 TV Input key
°
‚
8
Use to temporarily mute the TV sound.
Use when in TV operation.
EN
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Make connections as shown in the following pages.
When connecting the related system components, be sure
to refer to the instruction manuals supplied with the
components you are connecting.
Input mode settings
CD/DVD, VIDEO 2, VIDEO 3 and DVD/6CH inputs each include jacks
for digital audio input and analog audio input.
The initial factory settings for audio signal playback for CD/DVD,
DVD/6CH, VIDEO 2 and VIDEO 3 are full auto.
After completing connections and turning on the receiver, follow the
steps below.
Do not connect the power cord to a wall outlet until all
connections are completed.
Notes
1. Be sure to insert all connection cords securely. If their connections are
imperfect, sound may not be produced or there will be noise inference.
2. Be sure to remove the power cord from the AC outlet before plugging
or unplugging any connection cords. Plugging/unplugging connection
cords without disconnecting the power cord can cause malfunctions
and may damage the unit.
INPUT MODE
3. Do not connect power cords from components whose power
consumption is larger than what is indicated on the AC outlet at the
rear of this unit.
Input Selector
LISTEN MODE
Analog connections
Audio connections are made using RCA pin cords. These cables transfer
stereo audio signal in an “analog” form. This means the audio signal
corresponds to the actual audio of two channels. These cables usually
have 2 plugs on each end, one red for the right channel and one white for
the left channel. These cables are usually packed together with the
source unit, or are available at your local electronics retailer.
1 Use the Input Selector keys to select CD/DVD, VIDEO 2, VIDEO 3
or DVD/6CH.
2 Press the INPUT MODE key.
Each press switches the setting as follows:
Microcomputer malfunction
In DTS play mode
1 FULL AUTO (digital input, analog input)
2 DIGITAL MANUAL (digital input)
If operation is not possible or an erroneous display appears, even
though all connections have been made properly, reset the
microcomputer referring to “In case of difficulty”.
o
In CD/DVD, VIDEO 2, VIDEO 3 or DVD/6CH play mode
1 FULL AUTO (digital input, analog input)
2 DIGITAL MANUAL (digital input)
3 6CH INPUT (DVD/6CH input)
CAUTION
4 ANALOG (analog input)
Be sure to adhere to the following, or proper ventilation will be
blocked causing damage or fire hazard.
• Do not place any objects impairing heat radiation onto the top of the
unit.
• Leave some space around the unit (from the largest outside
dimension including projection) equal to or greater than, shown
below.
Digital input:
Select this setting to play digital signals from a DVD, CD, or LD
player.
Analog input:
Top panel : 50 cm
Side panel : 10 cm Back panel : 10 cm
Select this setting to play analog signals from a cassette deck, VCR,
or record player.
Auto detect:
In “FULL AUTO” mode (AUTO DETECT indicator light up), the
receiver detects the digital or analog input signals automatically.
Priority is given to digital signal during input mode selection. The
receiver will select the input mode and listening mode automatically
during playback to match the type of input signal (Dolby Digital,
PCM, DTS) and the speaker setting. The OPTICAL and COAXIAL
indicator on the display will light up when digital signal is detected.
If the input signal is analog, the ANALOG indicator will light up.
To keep the receiver set to the currently selected listening mode,
use the INPUT MODE key to select “DIGITAL MANUAL” (manual
sound). However, even when this setting is selected, there may be
cases in which the listening mode is selected automatically to
match a Dolby Digital source signal depending on the combination
of listening mode and source signal.
At DIGITAL MANUAL, if the audio reproduction stops in the middle
due to change in the input signals, etc. press the LISTEN MODE
Knob.
If the INPUT MODE key is pressed quickly, sound may not be
produced. Press the INPUT MODE key again.
EN
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Connecting the terminals
1 Strip coating.
2 Loosen.
Speaker placement
Center speaker
Subwoofer
3 Insert.
4 Secure.
Front speakers
(L,R)
Listening
position
Surround
speakers
(L,R)
Surround
back speakers
(SBL/SBR)
1 Strip coating.
2 Push the lever.
Front (left and right) speakers
Placeatthefrontleftandrightofthelisteningposition. Frontspeakers
are required for all surround modes.
Center speaker
3 Insert the cord.
4 Return the lever.
Place front and center. This speaker stabilizes the sound image and
helps recreate sound motion. Required for surround playback.
Surround (left and right) speakers
Place at the direct left and right, or slightly behind, the listening
position at even heights, approximately 1 meter above the ears of the
listeners. These speakers recreate sound motion and atmosphere.
Required for surround playback.
Subwoofer
Reproduces powerful deep bass sounds.
Surround back (left and right) speakers
Connection of banana plugs
Place the surround back left and right speakers behind the listening
position at the same height as the side surround speakers.
1 Secure.
2 Insert.
• Although the ideal surround system consists of all the speakers
listed above, if you don't have a center speaker or a subwoofer, you
can divide those signals between the available speakers in the
speaker settings steps to obtain the best possible surround
reproduction from the speakers you have available.
¡
• Sound will not be heard if the speaker terminal is not fully secured.
• Never short circuit the + and – speaker cords.
• If the left and right speakers are connected inversely or the speaker
cords are connected with reversed polarity, the sound will be unnatu-
ralwithambiguousacousticimaging. Besuretoconnectthespeakers
correctly.
Speaker impedance
Afterconfirmingthespeakerimpedanceindicationsprintedonthe
rear panel of the receiver, connect speakers with matching
impedance ratings. Using speakers with a rated impedance other
than that indicated on the rear panel of the receiver could result in
malfunctions or damage to the speakers or receiver.
EN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Connecting audio components
SYSTEM CONTROL
jacks
&
To AC wall outlet
L
IN
IN
REC OUT
PLAY IN
GND
PHONO
CD/DVD
MD/TAPE
OUT
Cassette deck or
MD recorder
IN
OUT
CD or DVD player
Movingcoil(MC)cartridgerecord
player cannot be used directly
fromthereceiverunit. Itcanonly
be used when another equalizer
amplifier is connected.
OUT
Record player
EN
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Connecting video components
About the S VIDEO
jacks
S Video jacks
S VIDEO
S VIDEO
OUT
VIDEO
S VIDEO
IN
VIDEO
S VIDEO
IN
VIDEO
S VIDEO
IN
VIDEO
S VIDEO
IN
VIDEO
S VIDEO
OUT
VIDEO
Use the S VIDEO jacks to
make connections to
video components with
S VIDEO IN/OUT jacks.
If you use the S VIDEO
•
jacks to connect your
video
playback
components, be sure to
use the S VIDEO jacks
when connecting your
monitor and video
recording components.
OUT
VIDEO
IN
VIDEO
IN
VIDEO
IN
VIDEO
IN
VIDEO
OUT
VIDEO
DVD
MONITOR
REC OUT
PLAY IN
PLAY IN
PLAY IN
VIDEO 1
VIDEO 2
VIDEO 3
Monitor TV
VIDEO
IN
Video
IN/OUT
Video inputs
Audio
IN/OUT
(Yellow RCA pin cords)
Video deck
OUT
IN
IN
OUT
Audio inputs
and outputs
Video inputs and outputs
(Yellow RCA pin cords)
DVD player or LD player
OUT
OUT
DVD player or LD player
OUT
OUT
A video component with digital audio outputs should be connected to the VIDEO 2 or VIDEO 3 jacks.
EN
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Digital connections
The digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable of outputting DTS, Dolby Digital, or standard PCM (CD)
format digital signals.
If you have connected any digital components to the receiver, be sure to read the “Input mode settings” section carefully.
8
COAXIAL
OPTICAL
CD/DVD
OPTICAL
VIDEO 3
OPTICAL
MONITOR
VIDEO
2
OPTICAL DIGITAL IN (AUDIO)
DVD/
6CH
Optical
fiber cable
CD or DVD player
DIGITAL IN
DIGITAL OUT
OPTICAL DIGITAL OUT (AUDIO)
Component with DTS,
Dolby Digital, or PCM
OPTICAL DIGITAL OUT
Optical fiber cable
Connect the video signal and digital
audio signals to the VIDEO 3 jacks.
(See “Connecting video components”.)
!
OPTICAL DIGITAL OUT (AUDIO)
Optical fiber cable
CD or DVD player
COAXIAL DIGITAL OUT (AUDIO)
COAXIAL
DIGITAL
OUT
Component with DTS,
Dolby Digital, or PCM
COAXIAL DIGITAL OUT
(AUDIO)
Connect the video signal and analog
audio signals to the VIDEO 2 jacks.
(See“Connectingvideocomponents”.)
!
RF digital demodulator
(DEM-9991D)
(sold separately)
DOLBY DIGITAL RF OUT (AUDIO)
PCM OUT
LD player
To connect an LD player with a DIGITAL RF OUT, connect the LD player to the KENWOOD RF digital demodulator (DEM-9991D).
Next, connect the DIGITAL OUT jacks of the demodulator to the DIGITAL IN jacks of the receiver.
Connect the video signal and analog audio signals to the VIDEO 2 or VIDEO 3 jacks. (See “Connecting video components”.)
EN
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Connecting video components (COMPONENT VIDEO)
If you have connected the receiver to a video component with COMPONENT jacks, you can get a better picture quality than by connecting to the S-VIDEO
jacks.
COMPONENT VIDEO
VIDEO
3
IN
DVD
IN
Y
CB
CR
CB
CR
Y
MONITOR OUT
Monitor TV
(with component jacks)
CR IN
CB IN
Y IN
DVD player (with component jacks)
CR OUT
CB OUT
• Connect to the VIDEO cord.
Y OUT
Video Recorder, DVD Recorder,
Satellite Cable Tuner & Game
Player (with component jacks)
CR OUT
CB OUT
Y OUT
When connecting the TV to the COMPONENT jacks, be sure to connect all the other components to the COMPONENT jacks.
EN
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Connecting a DVD player (6-channel input)
If you have connected a DVD player to the receiver with digital connection, be sure to read the “Input mode settings” section carefully.
8
COAXIAL
OPTICAL
CD/DVD
OPTICAL
VIDEO 3
OPTICAL
MONITOR
OUT
VIDEO
IN
VIDEO
IN
VIDEO
IN
VIDEO
IN
VIDEO
OUT
VIDEO
VIDEO
2
DVD
MONITOR
DVD/
6CH
DIGITAL IN
DIGITAL OUT
S VIDEO
IN
VIDEO
S VIDEO
IN
VIDEO
S VIDEO
IN
VIDEO
S VIDEO
OUT
VIDEO
ROOM B
OUT
DVD
MONITOR
CENTER
SUB
WOOFER
FRONT
SURROUND
PLAY IN
PLAY IN
VIDEO 2
VIDEO 3
DVD/6CH INPUT
SURROUND
OUT L/R
FRONT
OUT L/R
VIDEO OUT
(Yellow RCA
pin cord)
COAXIAL
DIGITAL OUT
(AUDIO)
CENTER
OUT
DVD player
SUBWOOFER
OUT
S VIDEO
OUT
S VIDEO cord
EN
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Connecting the speakers
Surround Back/Subwoofer
Use this terminal if you wish to
connect to a Surround Back
speaker with the SETUP of
“6ch AMP SB” or to connect
to a subwoofer speaker with
the SETUP of “6ch AMP SW”.
Surround Speakers
(Be sure to connect both
surround speakers)
Right
Left
Powered
subwoofer
SURROUND BACK/
SUBWOOFER
SURROUND
GRAY
BLUE
PURPLE
+
-
R
L
CENTER
SUB
WOOFER
RED
WHITE
GREEN
FRONT B
+
R
L
-
+
- -
+
R
FRONT A
L
CENTER
Right
Left
Front Speakers B
Center
Speaker
Right
Left
Front Speakers A
EN
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
PRE OUT connections
This receiver has additional preout jacks. These can be used for various purposes, but will need to be connected to an external power amplifier as shown
in the example below.
CENTER
L
R
ROOM B FRONT SURROUND SURROUND
BACK
SUB
WOOFER
PRE OUT
Center speaker
Subwoofer
Power amplifier
Power amplifier
Surround Back
speakers
Power amplifier
Surround speakers
Power amplifier
Power amplifier
Front speakers
• Connecting a speaker cord directly to a PRE OUT jack will not produce any sound from the speaker.
• To use the PRE OUT jacks, press only the SPEAKERS A key to the ON position.
• If you choose “6ch AMP SB”, sound will be heard from the PRE OUT Surround Back Left speaker (monaural) only.
• This connection is available for listening in ROOM B.
EN
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Connecting to another room (ROOM B)
This connection allows you to connect your main system to a monitor TV and speaker system located in another area (ROOM B).
CENTER
L
ROOM B
OUT
R
ROOM B FRONT SURROUND SURROUND
BACK
SUB
WOOFER
PRE OUT
Front speakers
(Room B)
Power amplifier
Monitor TV (Room B)
ROOM B
ROOM A
(Main system)
EN
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Connecting the external IR Repeater
The remote control for this receiver has the IR (infrared rays) transmission function. IR repeaters enables you to control components located in cabinets
or behind glass doors. You can enjoy a wider remote control signal range by placing the IR repeater away from the receiver.
KENWOOD components (except DVD player): System control
Other components: (Registering setup codes) IR REPEATER
)
°
Monitor TV
IR repeaters
IR RECEIVER
(IR-9991-sold
separately)
AC adapter
To AC wall
outlet
IR IN
IR
IR
RECEIVER
IN
REPEATER
OUT
IR OUT is free
Shape of plug to be connected.
IR RECEIVER IN
IR REPEATER OUT
Stereo mini plug
Mono mini plug
Sleeve
Tip
Connecting IR repeater
Sleeve
1 Connect the IR repeater to the device as described in the
Tip
repeater’s manual.
2 Connect the IR repeater cable(s) to the IR REPEATER OUT
jack(s).
Ring
IR IN / OUT SPECIFICATION:
Terminal
IR RECEIVER
IR REPEATER
Notes
IN
OUT
• IR repeaters send a signal similar to the device’s own remote con-
trol. Xantech repeaters (models 282-00, 286-00, or 283-00) are com-
patible with your new audio-video receiver.
To Tip
Signal
Ground
+ 8V
Signal
To Ring
To Sleeve
Ground
EN
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Connecting to the AV AUX jacks
The AV AUX jacks are convenient for connection of video components
Connecting the antennas
AM loop antenna
such as a camcorder or a video game.
The supplied loop antenna is for use indoors. Place it as far as possible
from the receiver, TV set, speaker cords and power cord, and adjust the
direction for best reception.
AV AUX
AM antenna terminal connections
1 Push lever.
2 Insert cord.
3 Release lever.
FM indoor antenna
The supplied indoor antenna is for temporary use only. For stable signal
reception we recommend using an outdoor antenna. Disconnect the
indoor antenna when you connect one outdoors.
S VIDEO
VIDEO
L-AUDIO-R
FM antenna terminal connections
Insert cord.
S VIDEO cord
FM outdoor antenna
Leadthe75Ω coaxialcableconnectedtotheFMoutdoorantennaintothe
room and connect it to the FM 75Ω terminal.
VIDEO OUT
Attach to the stand
Camcorder, other VCR,
video game or
ANTENNA
AUDIO OUT
S VIDEO OUT
portable MD player
AM
AM loop antenna
GND
FM indoor antenna
75
FM
FM outdoor antenna
Use an antenna
adaptor
(Commercially
available)
• To select the source connected to the AV AUX jacks press AV
AUX key.
¢
• When you connect the audio source such as the MD player, you
do not need to connect the video cable.
• When you connect the unit and the component with the S
VIDEO cord, you can get better picture quality.
EN
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the system
Connecting the system control
Connecting system control cords after connecting a KENWOOD
audio component system lets you take advantage of convenient
system control operations.
SYSTEM CONTROL OPERATIONS
Remote Control
Lets you operate this unit with the system remote supplied with the
receiver.
This unit is compatible only with the [SL-16] mode. The system
control operation is not available if the unit is connected in the
[XS8], [XS], or [XR] connection mode.
Automatic Operation
When you start playback from a source component, the input selector
on this unit switches to that component automatically.
If your component has the mode select switch, set the connected
components to the [SL16] mode.
Synchronized Recording
Lets you synchronize recording with the start of playback when
recording from CD, MD or analog discs.
SYSTEM CONTROL
SYSTEM CONTROL
cord
Registering setup codes for KENWOOD audio components
If you own remote controllable KENWOOD audio components that
are not compatible with system control, registering the setup code
enables you to control those components using the remote control
supplied with this unit (without connecting system control cords). To
register setup codes for your remote controllable KENWOOD audio
components, see “Registering setup codes for other components”.
°
• You may connect the system control cord to either the up or down
jack.
EXAMPLE: [SL16] mode connections
The underlined portion represents the setting of the system control
mode.
[SL16]
Receiver
SYSTEM
CONTROL
cord
Cassette deck
or MD recorder
[SL16] [XS] [XS8] [XR]
[SL16] [XS] [XS8]
[XS]
CD player
Record player
• In order to take advantage of the system control operations, the
components must be connected to the correct jacks. To use a CD
player it must be connected to the CD jacks. To use a cassette deck
(or MD recorder) it must be connected to the MD/TAPE jacks. When
using more than one CD player (etc.) only the one connected to the
specified jacks may be connected for system control.
• Some CD players and cassette decks are not compatible with the
[SL16] system control mode. Do not make system connections with
equipment that is not [SL16] compatible.
• Some MD players are not system control compatible. You cannot
make system control connections to this kind of equipment.
Notes
1. [SL16] equipment cannot be combined with [XR], [XS], and [XS8]
equipment for system operations. If your equipment consists of
this kind of combination, please do not connect any system con-
trol cords. Even without system control cords, normal operations
can be carried out without effecting performance.
2. Do not connect system control cords to any components other
than those specified by KENWOOD. It may cause a malfunction
and damage your equipment.
3. Be sure the system control plugs are inserted all the way in to the
system control terminals.
EN
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing for surround sound
Speaker settings
To enable you to obtain optimum enjoyment from the receiver’s listening
modes, make sure to complete the speaker settings (subwoofer, front,
center, and surround speakers) as described below.
4Select a speaker system.
If you have THX certified speakers, please set them to NML/THX.
1 Select the SP SETUP and press the SETUP key again so that
the subwoofer setting indication “SUBW ON” appears.
POWER
ON/STANDBY
SETUP MULTI CONTROL
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
STEREO
TUNED
SL
S
SB
SR
2 Use the MULTI CONTROL knob or Multi (%/fi) keys to select
the appropriate subwoofer setting.
1 SUBW ON : Subwoofer setting mode to the receiver is
ON.
TUNER
2 SUBW OFF : Subwoofer setting mode to the receiver is
OFF.
POWER RCVR
(Multi %/fi,
• The initial setting is “SUBW ON”.
@/#)
• When the setting “SUBW OFF” is selected, the front speakers
are automatically set to “FRNT LARGE” and the procedure skips
to step 6.
Before step 6, press the SETUP key to accept the setting.
• When subwoofer output sound is required, select “FRNT NML/
THX”, or select both “FRNT LARGE” and “SW RE-MIX ON”.
• After setting SW (subwoofer) from OFF to ON, 6ch AMP setup
display will appear to enable you to re-select either SW, SB or OFF
from the surround back or subwoofer speaker terminal.
Setup
1Turn on the power to this receiver by pressing the POWER
ON/STANDBY key or POWER RCVR key.
∧
3 Press the key or #key to accept the setting.
• The front speakers setting indication “FRNT” appears.
For the remote control, press and hold the TUNER key for
more than 3 seconds to switch to receiver mode.
2
3
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
Press the SETUP key to enter the SETUP mode.
The Surround Back and Subwoofer speaker output selections are
displayed as follows:
STEREO
TUNED
SL
S
SB
SR
1 6ch AMP SB : Surround Back/Subwoofer speaker terminal
will output SB sound. Surround Back pre out
4 Use the MULTI CONTROL knob or Multi (%/fi) keys to select
the appropriate front speakers setting.
will have output from SBL only.
2 6ch AMP SW : Surround Back/Subwoofer speaker terminal
willoutputSubwoofersound. SurroundBack
pre out will have output from SBL and SBR.
3 6ch AMP OFF : It is not advisable to use Surround Back/
Subwooferspeakerterminalforthisselection.
1 FRNT LARGE
:
:
Large front speakers are connected
to the receiver.
Average size front speakers are
connected to the receiver.
2 FRNT NML/THX
• For “FRNT LARGE” selection, no sound will be heard from
subwoofer speaker even when it is set to on. However, if you
select “SW RE-MIX ON” when subwoofer is selected, you will
be able to hear sound from the subwoofer.
Use the MULTI CONTROL knob or Multi (%/fi) keys to select the
speakers.
Press the SETUP key to proceed to the next SET UP selection.
When in STEREO mode, the sound goes directly to front
speaker.
∧
∨
/
Use
keys or @/ # keys for the following displays.
1 SP SETUP
2 TEST TONE
3 SP DISTANCE
4 DISP MODE
5 EXIT
∧
5 Press the key or #key to accept the setting.
• The center speaker setting indication “CNTR” appears.
6 Use the MULTI CONTROL knob or Multi (%/fi) keys to select
the appropriate center speaker setting.
The flow of the SET UP is as follows:
If you selected “LARGE” as the front speakers setting,
1 CNTR LARGE
:
A large center speaker is connected
to the receiver.
SP SETUP
Subwoofer
Front
TEST TONE
BASS PEAK
SP DISTANCE
Front Left
DISP MODE
Display Selector
Display Listen
EXIT
2 CNTR NML/THX : An average size center speaker is
T. TONE T. TONE
AUTO MANUAL
connected to the receiver.
Center
3 CNTR OFF
:
Center speaker setting mode to the
receiver is OFF.
L
C
L
C
R
Center
Front Right
Surround
Surround Right
SR
SB
(SBR/SBL)
SL
SW
Surround
Back
R
Surround Back
(Surround Back
Right/Left)
If you selected “NORMAL” as the front speakers setting,
SR
Surround
Mix
1 CNTR NML/THX : Center speaker setting mode to the
Surround Left
Subwoofer
SB
(SBR/SBL)
receiver is ON.
: Center speaker setting mode to the
Subwoofer
Re-mix
2 CNTR OFF
SL
receiver is OFF.
SW
Continued to next page.
EN
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing for surround sound
∧
∧
7 Press the key or #key again to accept the setting.
• The surround speaker setting indication “SURR” appears.
# Press the key or #key again to accept the setting.
• The subwoofer remix setting indication “SW RE-MIX” appears.
$ Use the MULTI CONTROL knob or Multi (%/fi) keys to select
the appropriate subwoofer re-mix setting.
8 Use the MULTI CONTROL knob or Multi (%/fi) to select the
appropriate surround speaker setting.
1 SW RE-MIX ON : Subwoofer re-mix setting mode to
the receiver is ON.
If you selected “LARGE” as the center speaker setting,
2 SW RE-MIX OFF : Subwoofer re-mix setting mode to
the receiver is OFF.
1 SURR LARGE
:
Large surround speakers are
connected to the receiver.
2 SURR NML/THX : Average size surround speakers are
• If subwoofer is turned off, subwoofer re-mix setting is not visible.
connected to the receiver.
3 SURR OFF
:
Surround speaker setting mode to
the receiver is OFF.
% Press the SETUP key again to return to the main setup
displays.
• The receiver enters the speaker volume level adjustment mode.
• In steps 4 and 5, indications appear only for the selected
channels of the speakers that require adjusting.
If you selected other than “LARGE” as the center speaker setting,
1 SURR NML/THX : Surround speaker setting mode
to the receiver is ON.
Surround speaker setting mode to
the receiver is OFF.
5Adjust the speaker volume level.
2 SURR OFF
:
From your usual listening position, adjust the volume levels. Using a
handheld SPL meter at arms length from your body, adjust the noise
to read 75dB when set to “C” weighting, “Slow” reading on the
meter. If you do not have an SPL meter, adjust the volume levels so
that the speakers sound about the same level, starting at the 0dB
setting on the display.
• When the setting “SURR OFF” is selected, the procedure skips
to step #.
∧
9 Press the key or #keys again to accept the setting.
• The surround speaker setting indication “SB” appears.
∧
/
∨
1 Press the
keys or @/#keys to select TEST TONE.
0 Use the MULTI CONTROL knob or Multi (%/fi) keys to
select appropriate surround back speaker setting.
2 Press the SETUP key for the following displays:
1 T.TONE AUTO
2 T.TONE MANUAL
If you selected “LARGE” as the surround speaker setting,
1 SB NML/THX : Average size surround back speaker is
connected to the receiver.
Large surround back speaker is
connected to the receiver.
Surround back speaker setting mode to
the receiver is OFF.
3 The selection of AUTO/MANUAL TEST TONE is done by the
MULTI CONTROL knob or Multi (%/fi) keys.
Press the SETUP key again to begin TEST TONE.
2 SB LARGE
:
:
3 SB OFF
Use the MULTI CONTROL knob or Multi (%/fi) keys to adjust
the volume level of the test tone output from the speaker
channel to be adjusted.
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
ForAUTOselection,thefirsttesttoneisheardfromthefrontleft
speaker for 2.5 seconds. The next test tone is heard from the
speakers in the following sequence for 2 seconds each.
LFE
STEREO
TUNED
SL
S
SB
SR
When the 6ch AMP SB has been selected.
If you selected “NORMAL” as the surround speaker setting,
LEFT
SUBW
When the 6ch AMP SW or OFF has been selected.
CNTR
RIGHT
SR
1 SB ON
:
Surround back speaker setting mode to the
receiver is ON.
SL
SB
2 SB OFF : Surround back speaker setting mode to the
receiver is OFF.
LEFT
CNTR
SL
RIGHT
SBL
SR
• After setting SB (surround back) from OFF to ON, 6ch AMP setup
display will appear to enable you to re-select either SW or SB from
the surround back or subwoofer speaker terminal.
SUBW
SBR
The channel indication blinks while the test tone is being output.
∧
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
! Press the
“SURR:MIX” appears.
key or # key again to accept the setting and
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
• Surr:mix is when the SL and SR speakers signals are mixed to
produce sound from the surround back speaker which would
enable the listener to enjoy sound coming from the back.
STEREO
TUNED
SL
S
SB
SR
• If you change the volume level settings for the speakers while
listening to music, the settings referred to on this page are also
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
changed.
fi
LFE
STEREO
TUNED
• IfthespeakersettingselectsareOFF, thespeakerlevelsettings
SL
S
SB
SR
are reset.
∧
∨
For MANUAL selection, press the
time to select the speaker channel.
/
keys or @/#keys each
@ Use the MULTI CONTROL knob or Multi (%/fi) keys to select
the following.
1 SURR:MIX ON
:
Surround mix setting mode to the
receiver is ON.
4 Press the SETUP key again.
• The test tone is turned off and return to the main setup displays.
2 SURR:MIX OFF : Surround mix setting mode to the
receiver is OFF.
• If surround back speaker is turned off, SURR:MIX setting is not
visible and the procedure skips to step #.
EN
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing for surround sound
6Adjust the bass peak level.
8Select the display mode.
∧
A restriction is put on the low frequency so that the bass peak level
will not go higher than the acceptable level when the volume is
increased.
∨
/
1 Press the
key or @/# keys to select the DISP MODE.
If subwoofer speaker is OFF, the limitation will affect the low
frequency of the front left and right speakers
2 Press the SETUP key for the following displays:
1 DISP SELECTOR
:
:
Displays the current input selector.
Displays the current listen mode.
∧
∨
1 Press the
press the SETUP key.
/
keys or @/# keys to select BASS PEAK and
2 DISP LISTEN
3 Use the MULTI CONTROL knob or Multi (%/fi) keys to select
the display mode.
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
SW
AUTO
MEMO
LFE
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
STEREO
TUNED
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
STEREO
TUNED
SL
S
SB
SR
2 Use the MULTI CONTROL knob or Multi (%/fi) keys to adjust
the bass peak level to –30dB.
• The adjustment range is from – 30dB to 0dB and OFF.
4 Press the SETUP key again to accept the setting.
∧
5 Use the key or #key to select EXIT.
3 For optimum bass peak level, keep increasing the bass peak
level by using the MULTI CONTROL knob or Multi (%/fi) keys
while test tone is being output until clip sound is heard from
the subwoofer or front speaker.
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
STEREO
TUNED
SL
S
SB
SR
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
CLIP
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
6 Press the SETUP key to exit the SET UP mode.
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
SW
AUTO
MEMO
LFE
STEREO
TUNED
Input level adjustment (analog sources only)
If the input level of an analog source signal is too high, the CLIP indicator
will blink to indicate the source signal. Adjust the input level.
4 Press the SETUP key to accept the setting.
SP
MUTE OPTICAL 6CH INPUT
AUTO DET
A
B
CLIP
OAXIAL
ANALOG 96kHz
L
C
SW
R
7Input the distance to the speakers.
∧
LFE
∨
SL
S
SB
SR
1 Press the
/
keys or @/#keys to select the SP DISTANCE
on setup displays and press the SETUP key again.
1 Use the Input Selector keys to select the source of which the
input level you want to adjust.
2 Measure the distance from the listening position to each of
the speakers.
• You can store a separate input level for each input source.
Jot down the distance to each of the speakers.
Distance to Front left speaker (L) : ____ feet (meters)
∧
/
∨
2 Press the SOUND and
the “INPUT” indication appears.
keys or @/# keys repeatedly until
Distance to Center speaker (C)
Distance to Front right speaker (R) : ____ feet (meters)
Distance to Surround right (SR) : ____ feet (meters)
: ____ feet (meters)
3
Use the MULTI CONTROL knob or Multi (%/fi) keys to adjust the
Distance to Surround back right (SBR) : ____ feet (meters)
Distance to Surround back left (SBL) : ____ feet (meters)
input level.
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
Distance to Surround left (SL)
Distance to Subwoofer (SW)
: ____ feet (meters)
: ____ feet (meters)
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
STEREO
TUNED
SL
S
SB
SR
∧
∨
3 Use the
/
keys or @/#keys to select the speakers and the
MULTI CONTROL knob or Multi (%/fi) keys to adjust the
• The adjustment mode is displayed for approximately 8 seconds.
• The input level may be adjusted to any one of three settings:
0dB, -3dB, and -6dB. (The initial setting is 0dB.)
distance to the front speakers.
The speaker indicator to be adjusted blinks.
4 Press the SOUND key again to return to the input indication.
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
STEREO
TUNED
SL
S
SB
SR
Indication in feet
Indication in meters
• The allowable setting range is 1 to 30 feet (0.3 to 9.0 m),
adjustable in 1 foot (0.3 m) increments.
4 Repeatsteps 3 toinputthedistanceforeachofthespeakers.
5 Press the SETUP key again to return to main setup displays.
• The speakers you have selected should appear on the display.
Confirm that all the speakers have been correctly selected.
EN
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Normal playback
Listening to a source component
Preparing for playback
Some preparatory steps are needed before starting playback.
VOLUME CONTROL
POWER
ON/STANDBY
A SPEAKERS B
INPUT MODE
Input Selector
AV AUX
Input Selector
MD/TAPE
Turning on the receiver
1 Turn on the power to the related components.
VOL
/
2 Turn on the power to this receiver by pressing the POWER
ON/STANDBY
key.
Selecting the input mode
If you have selected a component connected to the CD/DVD, VIDEO 2,
VIDEO 3 or DVD/6CH jacks, make sure that the input mode setting is
Use the Input Selector and AV AUX keys to select the
source you want to listen to.
1
correct for the type of audio signal to be used.
8
Selecting a source using each key.
Selecting MD/TAPE
1 “DVD/6CH”
2 “CD/DVD”
3 “PHONO”
4 “TUNER”
5 “VIDEO 1”
6 “VIDEO 2”
7 “VIDEO 3”
8 “MD/TAPE”
9 “AV AUX”
Select the source name corresponding to the component connected
to the MD/TAPE jacks. The initial factory setting is “TAPE”. To
change the source to “MD”, follow the steps below:
Hold down the MD/TAPE key for more than 2 seconds.
• The source indication changes to “MD”.
• To return to the original indication, repeat the above procedure.
Selecting the speaker system
2Start playback from the selected source.
Press the A SPEAKERS B key to select the speaker system to be
used.
Use the VOLUME CONTROL knob or VOL +/
the volume.
–
keys to adjust
3
A ON
B ON
:
:
Sound from the speakers connected to the SPEAKERS A
terminals on the rear panel.
Sound from the speakers connected to the SPEAKERS B
terminals on the rear panel. No sound will be heard from
the subwoofer.
A+B ON : Sound from both the speakers connected to the
SPEAKERS A and B terminals on the rear panel.
A+B OFF : No sound from the speakers. Use this setting when
listening with headphones for stereo sound in all playback
modes. The display segments are different depending on
the type of input signal.
The indicator for the speakers
you want to use should be lit.
CIN
ACT
DS
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
A
B
CLIP
COAXIAL
ANALOG 96kHzfs
L
C
SW
R
LFE
SL
S
SB
SR
• Selecting “6CH INPUT” by pressing the INPUT MODE key, whereby
“DVD/6CH” is the input source will cause SPEAKERS A to be selected
automatically.
EN
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Normal playback
Adjusting the sound
Once-touch low frequency emphasis (BASS BOOST)
(remote control only)
You can adjust the sound quality when the receiver is in the PCM stereo
and analog stereo modes and when “THX OFF”.
SPEAKER EQ ACTIVE EQ
A SPEAKERS B
TONE MULTI CONTROL
Press the Bass Boost key.
• Press the key once to select the maximum (+10) low frequency
emphasis setting.
• This key does not function when the receiver is in the sound quality
or ambience effects adjustment mode.
Switching back to the previous setting
Press the Bass Boost key again.
MUTE VOLUME
CONTROL
PHONES
TUNER
POWER RCVR
Adjusting the LOUDNESS mode (remote control only)
(Multi %/fi)
You can adjust the Loudness function which controls the low volume
settings to maintain the music's richness. The adjustment can be made
when the receiver is in the PCM stereo and analog stereo mode.
Mute
Tone
VOL
Bass Boost
/
Press the Loudness key to turn the LOUDNESS setting ON.
To cancel
Loudness
Speaker EQ
Active EQ
Press the Loudness key again so that the “LOUDNESS” indicator
goes off.
Muting the sound
Adjusting the TONE
The MUTE key lets you mute the sound of the speakers.
Press the MUTE key.
You can adjust the sound quality when the receiver is in the PCM stereo
and analog stereo mode and when “THX OFF”.
1 For the remote control, press and hold the TUNER key for more
than 3 seconds to switch to receiver mode.
CIN
AC
DS
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
A
B
CLIP
COAXIAL
ANALOG 96kHzfs
L
C
SW
R
LFE
2 Press the TONE key to select the TONE mode.
SL
S
SB
SR
3 Use the MULTI CONTROL knob or Multi (%/fi) keys to select
TONE ON/OFF.
Blinks
To cancel
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
Press the MUTE key again so that the “MUTE” indicator goes off.
• MUTE ON can also be deactivated by turning the VOLUME
CONTROL knob or pressing VOL +/– keys.
STEREO
TUNED
SL
S
SB
SR
4 WheninTONEONselection, presstheTONEkeyforthefollowing
displays.
BASS
:
Select this to adjust the low frequency range.
TREBLE : Select this to adjust the high frequency range.
5 Use the MULTI CONTROL knob or Multi (%/fi) keys to adjust the
sound quality.
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
STEREO
TUNED
SL
S
SB
SR
• The bass and treble levels are adjustable from -10 to +10 in 2 step
increments.
• The adjustment item is displayed for approximately 8 seconds.
EN
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Normal playback
ACTIVE EQ mode
Listening with headphones
1
Press the A and B Speaker keys so that the speaker indicator
goes off.
You can enjoy a more impressive sound effect when ACTIVE EQ is
turned ON during Dolby Digital and DTS playback and, when in PCM and
analog stereo mode.
Make sure the SPEAKERS
indicators are turned off.
Press the ACTIVE EQ key for the following selections;
CINEM
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
ACTIVE
A
B
CLIP
COAXIAL
ANALOG
DSP
M
1 ACTIVE EQ MUSIC : Effective when listening to music.
(The ACTIVE EQ indicator lights up.)
LFE
SL
S
SB
SR
2 ACTIVE EQ CINEMA : Effective when watching a movie.
(The ACTIVE EQ indicator lights up.)
• Ifyouturnoffallofthespeakerswheninsurroundmode,thesurround
mode will be canceled as well, resulting in stereo playback.
3 ACTIVE EQ TV
: Effective when watching TV.
(The ACTIVE EQ indicator lights up.)
: The ACTIVE EQ function is turned OFF.
(The ACTIVE EQ indicator goes off.)
4 ACTIVE EQ OFF
2 Connect headphones to the PHONES jack.
•
“ACTIVE EQ” will scroll from right to left.
PHONES
• When ACTIVE EQ and SPEAKER EQ are OFF and ACTIVE EQ
(MUSIC) is turned ON, SPEAKER EQ (SMALL) will turn ON
automatically.
• ACTIVE EQ function will not be available when REC MODE, AUTO
TUNING, PRESET MEMORY or DTS-ES MATRIX is ON, and during
96kHz LPCM playback.
3 Use the VOLUME CONTROL knob or VOL +/ keys to adjust
–
the volume.
SPEAKER EQ mode
SPEAKER EQ function is to adjust the receiver’s audio output
characteristicswiththespeakers’characteristicswhichdiffersdepending
on the size of the speakers. Especially for the music sound source
playback, the reproduced sound becomes more natural when adjusting
the output characteristics. When activating the SPEAKER EQ function,
you will be able to enjoy a more natural and dynamic sound experience
even with small size speakers.
Press the SPEAKER EQ key to switch the following setting;
1 SPEAKER EQ SMALL : To select a small size speaker.
(TheSPEAKEREQindicatorlightsup.)
2 SPEAKER EQ NORMAL : To select an average size speaker.
(TheSPEAKEREQindicatorlightsup.)
3 SPEAKER EQ LARGE
: To select a large size speaker.
(TheSPEAKEREQindicatorlightsup.)
: The SPEAKER EQ function is turned
OFF.
4 SPEAKER EQ OFF
(TheSPEAKEREQindicatorgoesoff.)
•
•
•
“SPEAKER EQ” will scroll from right to left.
SPEAKER EQ cannot be turned OFF when ACTIVE EQ is turned ON.
SPEAKER EQ function will not be available when REC MODE, AUTO
TUNING, PRESET MEMORY or DTS-ES MATRIX is ON, and during
96kHz LPCM playback.
EN
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Recording audio (analog sources)
3 Press and hold the DIMMER key for more than 2 seconds to
select the AUTO REC or MANUAL REC mode.
1 REC MODE off
:
:
The digital input record mode is
switched off.
The digital input signals (DTS, Dolby
Digital, or PCM) are identified auto-
matically and converted into stereo
signals that are ready for recording.
2 AUTO REC mode
3 MANUAL REC mode : The input signal type at the moment
thismodeisselectedisheldthrough-
out this mode.
MD/TAPE
Recording a music source
For AUTO REC mode :
1 Use the Input Selector keys to select the source (other than “MD/
TAPE”) you want to record.
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
2 Set the MD or TAPE recorder to record.
STEREO
TUNED
SL
S
SB
SR
3 Start playback, then start recording.
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
Recording video
1 Use the Input selector keys to select the video source (other than
L
C
SW
R
AUTO
MEMO
LFE
STEREO
TUNED
SL
S
SB
SR
“VIDEO 1”) you want to record.
2 Set the video deck connected to VIDEO 1 to record.
• Select the REC MODE to record a digital input source.
For MANUAL REC mode :
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
CLIP
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
3 Start playback, then start recording.
• Recording may not be normal for some video software. This is due
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
STEREO
TUNED
SL
S
SB
SR
to the copy guard condition.
w
Recording audio (digital sources)
Switch on the REC MODE to record a digital input source.
Usually use the AUTO REC MODE to record audio input sources. When
the digital mode changes during recording in the AUTO REC MODE, the
audio input source may be interrupted momentarily.
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
STEREO
TUNED
SL
S
SB
SR
4 Start playback, then start recording.
Recording music in AUTO REC or MANUAL REC mode
• If the audio reproduction stops in the middle due to change in the
input signals, etc., press the DIMMER key.
DIMMER
Input Selector
1 Use the Input Selector keys to select the source (CD/DVD,
DVD/6CH, VIDEO 2, VIDEO 3) you want to record.
2 Set the MD or TAPE recorder to record.
EN
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to radio broadcasts
The receiver can store up to 40 stations in the memory and recall them
by one-touch operation.
Presetting radio stations manually
Tuning radio stations
MULTI CONTROL
BAND
MULTI CONTROL
TUNER AUTO
TUNER MEMORY
1Tune to the station you want to store.
TUNER
2Press the MEMORY key while receiving the station.
(Multi %/fi)
Blinks for 5 seconds
Lights for 5 seconds
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
Band
Auto
L
C
SW
R
AUTO
MEMORY
STEREO
TUNED
LFE
Tune – 1
Tune + ¡
SL
S
SB
SR
Proceed to step 3within 5 seconds.
(If more than 5 seconds elapse, press the MEMORY key again).
1Use the TUNER key to select the tuner.
Use the MULTI CONTROL knob or Multi (%/ fi) keys to
3select one of the station presets (1 – 40).
2Use the BAND key to select the desired broadcast band.
Each press switches the band.
4Press the MEMORY key again to confirm the setting.
• Repeat steps 1, 2, 3, and 4 to store as many stations as
necessary.
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
STEREO
TUNED
SL
S
SB
SR
• If you store a station at a previously used preset, the old station will
be replaced by the new one.
Use the AUTO key to select the desired tuning method.
3
Each press switches the tuning method to either auto or manual
tuning.
“AUTO” indicator lights up in the display.
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
TY
CAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
XIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
AUTO
MO
STEREO
TUNED
• Normally, set to “AUTO” (auto tuning). If the radio waves are weak
and there is a lot of interference, switch to manual tuning. (With
manual tuning, stereo broadcasts will be received in monaural.)
Use the MULTI CONTROL knob or Multi (%/ fi) keys, or
Tune – 1/ + ¡keys to select the station.
4
“STEREO” lights when a broadcast is being received in stereo.
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
TICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
AXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
AUTO
MEMO
STEREO
TUNED
“TUNED” is displayed when a station is received.
Auto tuning : The next station is tuned automatically.
Manual tuning : Turn the knob or use the Multi (%/fi) keys to
select the desired station.
EN
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to radio broadcasts
Receiving preset stations
Receiving preset stations in order (P.CALL)
TUNER
TUNER
(P.Call @/#)
Numeric keys
Press the TUNER key to select tuner as the source.
1
2
1Press the TUNER key to select the tuner as the source.
2Use the P.Call @/ #keys to select the desired station.
Enter the number of the preset station you want to receive
(up to “40”).
• Each time you press the key, another preset station is received in
order.
Press the numeric keys in the following order:
For “15”, press
For “20”, press
0,5
0,0,)
Pressing the P.Call # does the following:
• If you make a mistake entering a two digit number, press the +10
key repeatedly to return to the original display and start again.
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
Pressing the P.Call @ does the following:
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
STEREO
TUNED
SL
S
SB
SR
Holding down the # or @ keys, lets you skip through the
presets, receiving each preset station at 0.5 second intervals.
EN
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Ambience effects
This receiver is equipped with listening modes that allow you to enjoy an enhanced sonic ambience with a variety of video
sources.
In order to obtain the optimum effect from the surround modes, make sure to input the proper speaker settings beforehand.
¡
Surround modes
The below speaker placements are for 5.1 channel surround sound
The below speaker placements are for 6.1 channel surround sound
system which are;
•Dolby Digital
•Dolby Pro Logic II
•THX
system which are;
•Dolby Digital EX
•DTS-ES
•Neo:6
•DTS
•THX surround EX
•SRS Circle Surround II
•DSP
•DVD 6-channel
•Dolby Digital, Dolby Pro logic II and DSP if "SURR MIX ON"
™
TV / SCREEN
TV / SCREEN
SW
C
SW
C
R
R
L
L
SL
SR
SL
SR
SBL
SBR
No Surround Back speaker
Two Surround Back speakers
L
Front left speaker
Subwoofer
SL
Surround left speaker
SW
C
SR
Surround right speaker
Surround back left speaker
Surround back right speaker
Center speaker
Front right speaker
SBL
SBR
R
Manufacturedunderlicense fromDolbyLaboratories.“Dolby”,
“Pro Logic”, “Surround EX” and the double-D symbol are
trademarks of Dolby Laboratories.
“Circle Surround II, SRS and the (O)
symbol are trademarks of SRS Labs,
Inc. Circle Surround II technology is
incorporated under license from SRS
Labs, Inc”.
Lucasfilm and THX are trademarks or registered trademarks of
Lucasfilm, Ltd. ©Lucasfilm Ltd. & TM. Surround EX is a jointly
developed technology of THX and Dolby Laboratories Inc. and is a
trademark of Dolby Laboratories Inc. All rights reserved. Used under
authorization.
“DTS”, “DTS-ES Extended
Surround” and “Neo:6” are
registered trademarks of Digital
Theater Systems, Inc.
EN
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Ambience effects
Dolby Digital
DTS
DTS (Digital Theater System) is a 5.1 channel digital audio format that
provides five full spectrum channels and one low-frequency
(subwoofer) channel for unprecedented clarity, optimum channel
seperation and a (wide) dynamic range.
The Dolby Digital surround format lets you enjoy up to 5.1 channels
of digital surround sound from Dolby Digital program sources (such
as Laserdisc or DVD software marked
previous Dolby surround, Dolby Digital provides even better sound
quality, greater spatial accuracy, and improved dynamic range.
). Compared with
In the DTS mode, the 5.1 channel digital input from a DTS CD, LD or
DVD disc (carrying the "DTS" marking) can be played in Digital
Surround.
Although a full set of speakers (front left, right, and center, surround
left and right, and a subwoofer) is required for true 5.1 channel Dolby
Digital surround sound, this receiver lets you enjoy Dolby Digital (and
Dolby Surround) program sources, even if you connect only the front
speakers.
DTS-ES
DTS-ES (Digital Theater System-Extended Surround) presents 6.1
channels surround system with additional Surround Back channel
which evolved from the conventional 5.1 channels surround system.
DTS-ES format that was recorded in DVD, CD or LD comprises of two
modes. DTS-ES Discrete 6.1 produce the discrete surround back
which is completely independent and DTS-ES Matrix 6.1 produces
thesurroundbackwhichsynthesisedwithintheleftandrightsurround
channels using matrix technology. DTS-ES has perfect compatibility
with the conventional 5.1 channels surround system. 6.1 channels
surround with an additional surround back presents a more natural
presence and surround effects by increasing the impression of the
sound image from back. Programs which are recorded using DTS-ES
technology consist of information flags which will be able to control
the Discrete and Matrix mode. Thus, it can automatically select the
best matched mode.
Dolby Digital EX
Dolby Digital EX is an extension of Dolby Digital technology, Dolby
Digital EX creates six full-bandwidth output channels from 6.1-
channel sources. This is done using a matrix decoder that derives
three surround channels from the two in the original recording. This
is achieved by using three different surround signals, Left Surround,
Right Surround, and Back Surround, each driving its own array of
speakers. Think of it as adding a center channel for the rear speakers,
which give more diffuse and natural surround effect, even if you
wanted the ability to completely encircle the audience with sound,
positioning sound effects exactly where they would be heard in real
life. For best results, Dolby Digital EX should be used with movie
soundtracks recorded with Dolby Digital Surround EX which contain
a digital flag that will automatically activate this feature. However, for
titles released prior to late 2001, this feature has to be activated
manually.
Neo:6
Neo:6 is a new technology which was developed by DTS. It can
produce high grade 6 channels surround with an astonishing fidelity
from 2 channels content. Neo:6 has 2 mode, "CINEMA" mode is for
movie playback and "MUSIC" mode is for music playback.
Although a full set of speakers (front left, right, and center, surround
leftandright, surroundbackleftandrightandasubwoofer)isrequired
for true 6.1 channel Dolby Digital Surround EX sound, this receiver
lets you enjoy Dolby Digital (and Dolby Surround) program sources,
even if you connect only the front speakers.
DTS has a .1 or LFE channel.
The indication “LFE” appears in the display when a signal is being
input for this channel.
Although only Dolby Digital soundtracks incorporate a separate low
frequency channel, connecting a subwoofer will also improve deep
bass performance in the other surround modes.
The indication “LFE” appears in the display when a signal is being
input for this channel.
DVD 6-channel mode
Using a DVD player or the like equipped with six (5.1) output channels
and the receiver, you can enjoy multi-channel encoded DVD source
material in all its splendor. Since the source signals are digital and
each channel is input independently, the resulting sound quality,
sense of spaciousness, and dynamic range are superb.
Dolby PRO LOGIC II
Dolby Pro Logic II was designed specifically to provide a new sense
of spatiality, directionality and articulation of sounds from Dolby
Surround encoded sources (such as video and Laserdisc software
The indication “LFE” appears in the display during DVD 6-channel
mode selection.
marked
). This is achieved with an intelligent, built-in
feedback logic design, a matrix surround decoding and the decoding
of stereo, full bandwidth surround outputs. The PRO LOGIC II modes
programmed into this receiver are “MOVIE”, “MUSIC” and “PRO
LOGIC”. The “MOVIE” mode of the PRO LOGIC II has preset
characteristics to produce a calibrated, high-level surround sound
playback while the “MUSIC” mode has user-adjustable characteris-
tics to offer the three optional controls, like “Dimension”, “Center
Width” and “Panorama” modes to allow optimization of the
soundfields as desired. The “Dimension” control allows the user to
gradually adjust the soundfield either towards the front or towards
the rear; the “Center Width” control allows various adjustment of the
left-center-right speakers’ balance; the “Panorama” mode extends
the front stereo image to include the surround speakers for an
exciting “wraparound” effect with side wall imaging.
Note
LFE = Low Frequency Effects. This channel delivers separate non-
directional bass signals to the subwoofer for more dynamic deep
bass sound effects.
EN
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Ambience effects
THX Surround EX mode
THX
THX Surround EX-Dolby Digital Surround EX is a joint development of
Dolby Laboratories and the THX division of Lucasfilm Ltd.
In a movie theatre, film soundtracks that have been encoded with
Dolby Digital Surround EX technology are able to reproduce an extra
channel which has been added during the mixing of the program. This
channel, called Surround Back, places sounds behind the listener in
addition to the currently available front left, front center, front right,
surround right, surround left and subwoofer channels. This additional
channel provides the opportunity for more detailed imaging behind
the listener and brings more depth, spacious ambience and sound
localization than ever before.
Movie soundtracks are mixed in special movie theatres called dub-
bingstagesandaredesignedtobeplayedbackinmovietheatreswith
similar equipment and conditions. This same soundtrack is then
transferred directly onto Laserdisc, VHS tape, DVD, etc., and is not
changed for playback in a small home theatre environment.
THX engineers developed patented technologies to accurately trans-
late the sound from the movie theatre environment into the home,
correcting the tonal and spatial errors that occur. Activate THX
whenever watching a movie that was intended for the playback in a
Cinema. On this product, when the THX indicator is on, the following
THX features are automatically added in movie playback modes (e.g.
Dolby Digital+THX, DTS+THX, THX Surround EX, etc):
Movies that were created using the Dolby Digital Surround EX
technology, when released into the home consumer market may
exhibit a Dolby Digital Surround EX logo on the packaging. A list of
movies created using this technology can be found on the Dolby web
Re-equalization (Re-EQ)
The tonal balance of a film soundtrack will be excessively bright and
harsh when played back over audio equipment in the home because
film soundtracks were designed to be played back in large movie
theatres using very different professional equipment. Re-Equaliza-
tionrestoresthecorrecttonalbalanceforwatchingamoviesoundtrack
in a small home environment.
Only receiver and controller product bearing the THX Surround EX
logo, when in the THX Surround EX mode, faithfully reproduce this
new technology in the home.
Timbre Matching
This product may also engage the “THX Surround EX” mode during
the playback of 5.1 channel material that is not Dolby Digital Surround
EX encoded. In such case the information delivered to the Surround
Back channel will be program dependent and may or may not be very
pleasing depending on the particular soundtrack and the taste of the
individual listener.
The human ear changes our perception of a sound depending on the
direction from which the sound is coming. In a movie theatre, there
is an array of surround speakers so that the surround information is
all around you. In a home theatre, you use only two speakers located
to the side of your head. The Timbre Matching feature filters the
information going to the surround speakers so that they more closely
match the tonal characteristics of the sound coming from the front
speakers. This ensures seamless panning between the front and
surround speakers.
Adaptive Decorrelation
SRS Circle Surround II
In a movie theatre, a large number of surround speakers help create
anenveloping surround sound experience, but in a home theatre
there are usually only two speakers. This can make the surround
speakers sound like headphones that lack spaciousness and envelop-
ment. Thesurroundsoundswillalsocollapseintotheclosestspeaker
as you move away from the middle seating position. Adaptive
Decorrelation slightly changes one surround channel's time and
phase relationship with respect to the other surround channel. This
expands the listening position and creates - with only two speakers
- the same spacious surround experience as in a movie theatre.
SRS Circle Surround II™ improves on its predecessor CS-5.1™
resulting in the CS-6.1™ system, enabling you to listen to realistic,
multi-channel, surround sound playback from a stereo source or
conventional surround-encoded video source. You already enjoy
listening to Dolby Digital/DTS multi-channel sound with your multi-
speakers. Now you can listen to audio CDs, MDs, Broadcast and
Home Theater using your multi-speakers. You will discover a new
type of sound through SRS Circle Surround II.
The CS system dramatically reduces storage space requirements for
multi-channel content. It creates a listening environment that places
the listener “inside” music performances, and dramatically improves
both hi-fi audio and conventional surround-encoded video material.
The CS decoder also includes the SRS technologies Focus™ and
TruBass™. Focus electronically raises the sound stage from the
speaker location to an optimal position. TruBass creates deep, rich
bass in small speaker systems without the need for a subwoofer.
THX Select
Before any home theatre component can be THX Select certified, it
must incorporate all the features above and also pass a rigorous
series of quality and performance tests. Only then can a product
feature the THX Select logo. Hundreds of parameters in both the
digital and analog domain are tested and required to meet very
specific high quality standards which is your guarantee that the Home
Theatre products you purchase will give you superb performance for
many years to come. THX Select requirements cover every aspect of
the product including pre-amplifier and power amplifier performance
and operation
DSP mode
The DSP mode lets you add the atmosphere of a live concert or hall
to almost any type of program source. These modes are particularly
effectivewhenusedwithstereoprogramsources, likeCD, television,
and FM radio. You might enjoy trying the ARENA, JAZZ CLUB,
THEATER, STADIUM or DISCO mode the next time you watch a
concert or sporting event!
What's DSP?
DSP stands for Digital Signal Processor.
The way a sound is heard in an actual environment depends on a
varietyofdifferentfactors. Oneofthemostimportantisreverberation
(the act of decaying elements of sound echoing in various places).
The DSP modes produce the feeling of presence by using the DSP to
create reverberation, without spoiling the sound quality of the original
signal.
EN
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Ambience effects
Surround play
When you select DOLBY DIGITAL
“DOLBY DIGITAL” will be displayed.
The DTS compatible models can reproduce a CD, DVD, or LD carrying the
DTS mark.
DOLBY DIGITAL can be used when playing DVD or LD software bearing
CINEMA EQ. STEREO NEO:6
AUTO DETECT
ACTIVE EQ. MATRIX
96kHzfs DSP MODE DISCRETE PRO LOGIC LOUDNESS CSII
DTS.
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
CLIP
DOLBY DIGITAL
THX
Surround EX
the
DOLBY PRO LOGIC can be used when playing video, DVD, or LD
software bearing the mark.
mark and DOLBY DIGITAL format digital broadcasts (etc.).
A
B
COAXIAL
ANALOG
L
C
R
AUTO
MEMO
LFE
STEREO
TUNED
SL
SR
SRS Circle Surround enables you to listen to multi channel sound from
II
the stereo source.
When the DTS or DTS-ES (matrix or discrete) signal is input :
1 DTS
: (DTS indicator lights up.)
2 DTS-ES MATRIX
3 DTS-ES DISCRETE : (DTS and DISCRETE indicators light up.)
4 STEREO : Normal stereo playback.
: (DTS and MATRIX indicators light up.)
THX DSP
INPUT MODE
When the analog signal or the digital signal (except for
DOLBY DIGITAL or DTS signal) is input :
1 PLII MOVIE
2 PLII MUSIC
3 PRO LOGIC
:
:
:
PRO LOGIC II surround MOVIE mode.
(The PRO LOGIC indicator lights up.)
PRO LOGIC II surround MUSIC mode.
(The PRO LOGIC indicator lights up.)
PRO LOGIC II surround PRO LOGIC mode.
(The PRO LOGIC indicator lights up.)
Input Selector
LISTEN MODE
Input
Selector
4 NEO:CINEMA : NEO:6 surround.
(The NEO:6 indicator lights up.)
NEO:6 surround.
(The NEO:6 indicator lights up.)
6 CSII CINEMA : CS 6.1 surround.
(The CS II indicator lights up.)
CS 6.1 surround.
5 NEO:MUSIC
:
7 CSII MUSIC
8 CSII MONO
9 STEREO
:
:
:
DSP Mode
Input Mode
(The CS II indicator lights up.)
CS 6.1 surround.
(The CS II indicator lights up.)
Normal stereo playback.
Listen Mode 5/∞
THX
(The STEREO indicator lights up.)
Preparations
•DolbyDigitalorDTSsignalhavingmorechannelsthanthemaximum
number of playback channels available using the receiver’s current
settings is input, downmixing is performed to match the number of
available channels.
• Turn ON related components.
• Complete “Preparing for surround sound” (speaker settings).
¡
• Use the Input Selector keys to select the component you wish to play
back with surround sound.
• Use the INPUT MODE key to select the input mode (analog or digital)
for the source you wish to play back.
• Noise will be produced when a DTS source is played by selecting the
analog input.
8
3DSP mode (Digital Signal Processor).
DSP can produce these effects without spoiling the sound quality of
the original music or video source.
1Start playing the video software.
1 Pressing the DSP key or DSP Mode key will display the
current DSP MODE status.
Use the LISTEN MODE knob or Listen Mode 5/ ∞keys to
select the listening mode.
2
2 Each press of the key will switch to the next status as shown
The listening mode settings are stored separately for each input. If
the input mode is set to full auto (“AUTO DETECT” lights), the
receiver selects the optimal listening mode automatically based on
the type of input signal and the speaker settings.
bellow:
1 ARENA
: DSP surround ARENA mode.
: DSP surround JAZZ CLUB mode.
: DSP surround THEATER mode.
: DSP surround STADIUM mode.
: DSP surround DISCO mode.
2 JAZZ CLUB
3 THEATER
4 STADIUM
5 DISCO
Each turn of the LISTEN MODE knob or press of the Listen Mode
5/ ∞ keys switches the setting as listed below.
• TheDSPmodeselectionisdisplayedforapproximately3seconds.
The listening mode settings are different depending on the type
of input signal.
When the DOLBY DIGITAL or DOLBY DIGITAL EX signal is
input :
(The DOLBY DIGITAL or PRO LOGIC, indicator lights up.)
1 DOLBY DIGITAL : DOLBY DIGITAL surround.
2 DOLBY D EX
: DOLBY DIGITAL EX surround.
3 PLII MOVIE
: PRO LOGIC II surround MOVIE mode.
(The PRO LOGIC indicator lights up.)
: PRO LOGIC II surround MUSIC mode.
(The PRO LOGIC indicator lights up.)
: PRO LOGIC II surround PRO LOGIC mode.
(The PRO LOGIC indicator lights up.)
: Normal stereo playback.
4 PLII MUSIC
5 PRO LOGIC
6 STEREO
EN
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Ambience effects
DVD 6-channel playback
UsingaDVDplayerorthelikeequippedwithsix(5.1)outputchannelsand
the receiver, you can enjoy surround sound playback.
Connecting a DVD player which can decode the surround signal itself is
also acceptable.
4THX mode.
This mode creates a home theater environment which is able to
reproduce a cinema surround sound system featuring improved
special representation and acoustic imaging of surround channels by
translating THX Surround EX technology.
Press the THX key to switch the following setting :
1 THX Sur EX ON
:
THX Surround EX function is turned ON
when Dolby Digital 5.1ch signal is
detected.
VOLUME
CONTROL
INPUT MODE
(THX indicator lights up.)
2 THX Sur EX AUTO
:
THX Surround EX function is turned ON
when Dolby Digital Surround EX signal is
detected.
(THX indicator lights up.)
3 THX ON
:
:
THX mode is turned ON.
(THX indicator lights up.)
THX mode is turned OFF.
(THX indicator goes off.)
4 THX OFF
DVD/6CH
DVD/6CH
• THX functions when the display segment is turned ON.
• THX Sur EX ON and THX Sur EX AUTO will not be available if
surround back speakers are turned OFF.
• The THX setting differs depending on the input selector.
• When CS II, PL II MUSIC, NEO:MUSIC, ACTIVE EQ or SPEAKER
EQ is ON, THX function will not be effective.
VOL
/
Adjust the volume.
5
Input Mode
Notes
• Depending on the type of the signal or speaker setting, some listening
modes cannot be selected.
• When playback is started, the sound may be cut or interrupted before
the input source is confirmed as Dolby Digital.
• To enjoy Dolby Digital surround (as well as all the other listening modes)
from a single component, be sure to use a Dolby Digital compatible
source component.
• DialogueNormalization(DialNorm)isafeatureofDolbyDigital. Itisable
to automatically maintain the overall audio output level constant.
Preparations
• Connect your DVD player to the DVD/6CH jacks of the receiver.
• Turn on all other components that will be used.
• Complete “Preparing for surround sound”.
¡
CINEMA EQ. STEREO NEO:6
AUTO DETECT
ACTIVE EQ. MATRIX
96kHzfs DSP MODE DISCRETE PRO LOGIC LOUDNESS CSII
DTS.
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
CLIP
DOLBY DIGITAL
THX
Surround EX
Press “DVD/6CH” as the input source.
A
B
1
COAXIAL
ANALOG
L
C
SW
R
AUTO
MEMO
STEREO
TUNED
• If speaker system B is on when “DVD/6CH” is selected as the input
SL
S
SB
SR
source,itswitchesoffandspeakersystemAturnsonautomatically.
When playing some Dolby Digital sources, you may see in the display
a message "DIALNORM OFFSET xxdB". This is because some
soundtracks may be recorded either louder or quieter than normal. The
xx number shows by how much.
For example, if the message says “DIALNORM OFFSET +4dB” you
know that this particular recording was encoded 4dB louder than
normal. If you wish, you can turn down the volume control by 4dB to
keep the playback level consistent.
2Select "6CH INPUT" by pressing the INPUT MODE key.
3Start playback of the DVD software.
4Adjust the volume.
• It is not possible to adjust the volume level or sound quality (SET
UP, SOUND, LISTEN MODE, ACTIVE EQ and TONE key will not
be functional) of the channels separately when the receiver is in
the 6CH INPUT mode. Adjust the volume with the controls of the
DVD player.
For the powered subwoofer, you can adjust the volume of the
subwoofer using the subwoofer’s own volume control.
EN
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Ambience effects
Convenient functions
Midnight mode (Dolby Digital mode only)
When watching movies at night , you might not be able to raise the volume as
loud as normal. Midnight mode compresses the dynamic range of previously
specifiedheavysoundpassageoftheDolbyDigitalsoundtrack(likesceneswith
sudden increases in volume) to minimize the difference in volume between the
sceneswithheavysoundpassageandsceneswithnormlalsoundpassage.This
makesiteasytohearallofthesoundtrack, evenwhenlisteningatlowvolumes.
STEREO DIMMER MULTI CONTROL
∧
∨
/
1 Press the SOUND key, then press the
“MIDNIGHT” appears on the display.
keys or @/#keys until
• This can be selected only if CD/DVD, DVD/6CH, VIDEO 2 or VIDEO 3 is
selected as the source and the listen mode is set to “DOLBY DIGITAL.”
2 Use the MULTI CONTROL knob or Multi (%/fi) keys to select
the ON or OFF setting.
SOUND
LISTEN MODE
CINEMA EQ. STEREO NEO:6
AUTO DETECT
ACTIVE EQ. MATRIX
96kHzfs DSP MODE DISCRETE PRO LOGIC LOUDNESS CSII
DTS.
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
DOLBY DIGITAL
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
L
C
SW
R
TUNER
AUTO
MEMO
LFE
STEREO
TUNED
SL
S
SB
SR
(Multi %/fi,
@/ #)
• The adjustment item is displayed for approximately 8 seconds.
• Some Dolby Digital software may not be compatible with the
Midnight mode.
Sound
Dimmer
Panorama mode (Pro Logic II Music mode only)
Stereo
Listen Mode5/∞
When listening to music, you will be able to enjoy the “wraparound”
sound effect when you adjust the panorama mode.
∧
∨
/
1 Press the SOUND key, then press the
“PANORAMA” appears on the display.
keys or @/#keys until
Adjusting the sound
2 Use the MULTI CONTROL knob or Multi (%/fi) keys to
select PANORAMA ON or OFF.
You can make further adjustments to the sound while listening to
playback in the surround mode.
1 PANORAMA ON : PANORAMA mode is ON.
2 PANORAMA OFF : PANORAMA mode is OFF.
1
For the remote control, press and hold the TUNER key for
more than 3 seconds to switch to receiver mode.
CINEMA EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
ACTIVE EQ.
Surround EX
A
B
CLIP
PRO LOGIC
COAXIAL
ANALOG
DSP MODE DISCRETE
LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
∧
STEREO
TUNED
∨
2 Press the SOUND key and then use the
until the desired item appears in the display.
/
keys or @/# keys
SL
S
SB
SR
∧
∨
/
Each time you press the
changes as follows:
keys or @/# keys, the menu
Dimension mode (Pro Logic II Music mode only)
Note that some items are not displayed in certain modes.
Whenlisteningtomusicwithcertainrecordings,youwillalsobeabletoachieve
a suitable balance from all the speakers by adjusting the dimension mode.
1 CNTR (Center speaker level adjustment)*
2 SR (Right surround speaker level adjustment)*
3 SBR (Surround back right speaker level adjustment)*
4 SBL (Surround back left speaker level adjustment)*
5 SL (Left surround speaker level adjustment)*
6 SUBW (Subwoofer level adjustment)*
∧
∨
/
1 Press the SOUND key, then press the
“DIMENSION” appears on the display.
keys or @/#keys until
2 Use the MULTI CONTROL knob or Multi (%/fi) keys to adjust
the soundfield towards the rear or the front.
7 INPUT (Input level adjustment - analog mode only)
¢
8 MIDNIGHT (Midnight mode ON/OFF - Dolby Digital mode only)
9 PANORAMA (Panorama mode ON/OFF)**
0 DIMENSION (Dimension adjustment)**
- CENTER WIDTH (Center width adjustment)**
= CENTER FOCUS (Center focus adjustment)***
~ CSII DLY (Rear speaker delay adjustment)***
! CSII GAIN (Input gain adjustment)***
Soundfield is adjusted towards the front.
CINEMA EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
ACTIVE EQ.
A
B
CLIP
PRO LOGIC
COAXIAL
ANALOG
DSP MODE DISCRETE
LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
STEREO
TUNED
SL
S
SB
SR
@ TruBass (TruBass adjustment)***
Soundfield is in neutral position.
*
The adjustment is only temporary for the current input selection.
The value will return automatically to the original setup value when
the power is turned on/off or when the input selection is changed.
CINEMA EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
ACTIVE EQ.
A
B
CLIP
PRO LOGIC
COAXIAL
ANALOG
DSP MODE DISCRETE
LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
** Pro Logic II Music mode only.
*** CS II mode only.
STEREO
TUNED
SL
S
SB
SR
3 Use the MULTI CONTROL knob or Multi (%/fi) keys to adjust the
setting as desired.
• The adjustment item is displayed for approximately 8 seconds.
Soundfield is adjusted towards the rear.
CINEMA EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
ACTIVE EQ.
A
B
CLIP
PRO LOGIC
COAXIAL
ANALOG
DSP MODE DISCRETE
LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
STEREO
TUNED
SL
S
SB
SR
EN
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Ambience effects
Center Width mode (Pro Logic II Music mode only)
CS II Gain adjustment mode (CS II mode only)
CS II GAIN allows user to adjust the input gain for the Circle Surround II
Center width adjustment allows you to enjoy an enchanced sound when
listening to music through center image from only center speaker, or left
and right speakers or various combinations adjustments.
processing.
∧
∨
/
1 Press the SOUND key, then press the
“CSII GAIN” appears on the display.
keys or @/#keys until
∧
∨
1 Press the SOUND key, then press the
“CENTER WIDTH” appears on the display.
/
keys or @/#keys until
2 Use the MULTI CONTROL knob or Multi (%/fi) keys to adjust
the input gain.
• The adjustment range is from 0 to -18.
• The CENTER WIDTH indication scrolls across the display.
• When the center speaker is switched OFF, this mode will not be
effective.
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
2 Use the MULTI CONTROL knob or Multi (%/fi) keys to adjust
the left-center-right output.
LFE
STEREO
TUNED
SL
SB
SR
Center image will be heard from center speaker only.
CINEMA EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
ACTIVE EQ.
A
B
CLIP
PRO LOGIC
COAXIAL
ANALOG
DSP MODE DISCRETE
LOUDNESS
CSII
TruBass adjustment mode (CS II mode only)
L
C
SW
R
AUTO
MEMO
LFE
STEREO
TUNED
TruBass adjustment provides deep, rich bass sound to various speakers.
SL
S
SB
SR
∧
∨
/
1 Press the SOUND key, then press the
“TruBass” appears.
keys or @/#keys until
Center image will be heard from left and right speakers only.
CINEMA EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
ACTIVE EQ.
A
B
CLIP
PRO LOGIC
COAXIAL
ANALOG
DSP MODE DISCRETE
LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
2 Use the MULTI CONTROL knob or Multi (%/fi) keys to select
LFE
STEREO
TUNED
the following;
SL
S
SB
SR
1 TruBass OFF
2 TruBass SW
3 TruBass LR
• When in other position, center image from center speaker, left and
rightspeakerscanbeheardsimultaneouslywithvariouscombinations.
4 TruBass SW + LR
Circle Surround II mode
• Afterselecting2,3or4,TruBassspeakersizeandleveladjustment
selection will be available.
When you select the circle surround II mode, you will be able to enjoy the
multi surround sound from the stereo source.
3 For TruBass speaker selection, use the MULTI CONTROL knob
or Multi (5/∞) keys to select any of the following display;
Use the LISTEN MODE knob or Listen Mode 5/∞keys for CS II selection.
1 TruBass LARGE
2 TruBass MID
3 TruBass SMALL
Center Focus mode (CS II mode only)
Center focus elevate level adjustment allows you to enjoy an enchanced
sound when you select CS II CINEMA/MUSIC/MONO. It repositions the
sound image to an optimal position more natural to the listener through
the center image.
4 Use the MULTI CONTROL knob or Multi (%/fi) keys to adjust
the TruBass Level.
• The adjustment range is from 0 (Trubass OFF) to 10.
∧
∨
1 Press the SOUND key, then press the
“CENTER FOCUS” appears on the display.
/
keys or @/#keys until
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
CLIP
AUTO DETECT
96kHzfs
THX
Surround EX
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
AUTO
MEMO
L
C
SW
R
LFE
AUTO
MEMO
LFE
STEREO
TUNED
STEREO
TUNED
SL
SB
SR
SL
SB
SR
2 Use the MULTI CONTROL knob or Multi (%/fi) keys to adjust
the center elevation level.
• The adjustment range is from 0 to 10.
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
STEREO
TUNED
SL
SB
SR
• CENTER FOCUS will not be available when the center speaker is OFF.
CS II Rear Delay adjustment mode (CS II mode only)
CS II Rear Delay adjustment provides a better sound effect from the rear
speakers.
∧
∨
/
1 Press the SOUND key, then press the
“CSII DLY” appears on the display.
keys or @/#keys until
2 Use the MULTI CONTROL knob or Multi (%/fi) keys to adjust
the rear speaker.
• The adjustment range is from 0 ms to 25 ms.
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
C
SW
R
AUTO
MEMO
LFE
STEREO
TUNED
SL
SB
SR
EN
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Ambience effects
Display dimmer adjustment
The dimmer function lets you select the brightness of the receiver's
display. You might find this useful if you darken your room to watch
movies or listen to music.
Each time you press the DIMMER key, the display brightness
changes among the three available settings.
Select the brightness level you find most pleasing.
CINEMA EQ.
ACTIVE EQ.
DTS. DOLBY DIGITAL STEREO NEO:6
MATRIX
RDS
RTY
SP
MUTE OPTICAL 6CH INPUT
AUTO DETECT
96kHzfs
THX
Surround EX
A
B
CLIP
COAXIAL
ANALOG
DSP MODE DISCRETE PRO LOGIC LOUDNESS
CSII
L
L
L
C
SW
SW
SW
R
R
R
AUTO
MEMO
LFE
STEREO
TUNED
STEREO
SP
A
C
STEREO
SP
A
C
96kHz LPCM playback
The receiver is compatible with the 96kHz LPCM playback. To play a
96kHz DVD, set the listen mode to “STEREO”.
• In FULL AUTO input mode the listen mode will automatically be
STEREO.
• When in DIGITAL MANUAL input mode (listen mode is not STEREO),
“96kHz LPCM” will appear in the display and no sound can be heard
from the speakers.
Press the Listen Mode or Stereo key (the listen mode changes to the
STEREO mode) to output sound from the speakers.
EN
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
Theremotecontrolsuppliedwiththisreceiverisalsocapable
Press the numeric key to enter the four-digit code for the
component to be registered.
• If performed correctly, the will blink twice.
• Point the remote control at the component and press SRC Power
key once. It should turn on/off but if it does not, repeat step 2to 4
• If the component still does not work, try searching for the code.
4
of controlling components from a variety of manufacturers
once you register the appropriate setup codes into the
remote control unit.
Low battery warning
Replacealltwobatterieswithnewoneswhenyounoticeashortening
of the distance from which the remote control will operate.The
remote control is designed to retain setup codes in memory while
you change batteries.
Repeat steps 2to 4to register additional components until
all components have been registered.
5
Note
Although each setup code is designed to work with a number of
different models, certain codes may not work with some models.
(Also, certain codes may only operate some of the functions available
on a given model.)
Registering setup codes for other components
LCD
Source
keys
SRC Power
Searching for your codes
Numeric keys
If your component does not respond after trying all the codes listed for
your component, or if your component is not listed at all, try searching
for your code.
For example, to search for code for your TV:
Press the TV key once. Next, press and hold the Learn key
until the blinks twice, then release the Learn key.
1
Learn
2Press the numeric key to enter "9 - 9 - 1".
Find the setup code of the component to be registered.
1
•
will blink twice.
• Refer to the setup code lists to find the setup code for the
component to be registered.
Example: To register a DVD made by KENWOOD, you would enter
“0534”.
fi
3Point the remote control at the TV and slowly alternate
between pressing the SRC Power and TV key.
•Stop when the TV turns on or off.
Input
Component
Maker
Code
Key
•In the search mode, the remote control will send IR codes from its
library to the selected device, starting with the most popular code
first.
(DVD)
DVD player KENWOOD
0534
DVD
4Press the Learn key once to lock in the code.
Source key
Other components
5To search for the codes of your other components, repeat
steps 1through 4, but substitute the appropriate key (i.e.,
DVD/6CH, CD/DVD, VID1, VID2, VID3, TV, MD/TAPE, AV AUX,
PHONO).
TUNER
Receiver (Kenwood)
DVD/6CH
CD/DVD
DVD (other manufacturers')
CD and MD (Kenwood)
•PHONO key has to be re-assigned to another key before a setup
MD/Tape
VID1 / AV AUX
VID2
Cassette deck (Kenwood)
code can be programmed.
VCR and PVR (other manufacturers')
Cable and DTV decoder (other
manufacturers')
VID3
PHONO
TV
DSS (other manufacturers')
Additional key for re-assigning
TV/VCR combo, TV/DVD combo, TV
(other manufacturers')
Press the source keys (DVD/6CH, CD/DVD, VID1, VID2, VID3,
2
3
TV, MD/TAPE, AV AUX, PHONO).
7
• PHONO key has to re-assigned to another key before a setup code
can be registered.
·
• While in Tuner mode, setup code function will not be available.
Press and hold the Learn key until the blinks twice, then
release the Learn key.
EN
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
Checking the codes
To clear the re-assignment and reset the remote control to its
original operation mode:
5
If you have setup the remote control using the procedures described in
“Searching for your codes”, you may need to find out which four-digit
code is operating your equipment:
1 Press and hold the Learn key until blinks twice, then release
the Learn key.
For example, to find out which code is operating your TV:
2 Press the numeric key to enter "9 - 9 - 2".
Press the TV key once. Next, press and hold the Learn key
until blinks twice, then release the Learn key.
1
3 Press VID2 key twice.
2Press the numeric key to enter "9 - 9 - 0".
• When a re-assignment is done, will blink twice to confirm
your choice. At that time, you will need to program the remote
control in order to control the new component.
•
will blink twice.
3To view the code for the first digit, press “1” once. Wait for 3
seconds, counts the number of times the LED blinks (e.g.,
blinks=3) and write down that number.
• If an invalid key sequence is entered,
blink once and return to
normal operation.
• When in Tuner mode, re-assignment is not available.
•If a code digit is “0”, will not blink.
Operating other components
This operation lets you operate the registered components.
KENWOOD audio components with system control turn on and off
automatically with the receiver via the system control connections.
4Repeat step 3three more times for the remaining digits. Use
“2” for the second digit, “3” for the third digit, and “4” for the
fourth digit.
5To check the codes of your other components, repeat steps
1 through 4, but substitute the appropriate key (i.e.,
DVD/6CH, CD/DVD, VID1, VID2, VID3, TV, MD/TAPE, AV AUX,
PHONO) for the component you are checking.
Source
keys
• As suggested earlier on, write down each of the four-digit code.
• PHONO key has to be re-assigned to another key before a setup
code can be programmed.
SRC Power
Re-assigning device keys
The remote control can be setup to control second TV or VCR, or any
combination of eight home entertainment components.
For example, to control the operation of two different VCR using the
remote control, the user need to re-assign the unused VID2 key to
operate the second VCR(VID1) as follows:
Use the source keys to select the component you desire.
• Pressing the source keys also changes the input selector on the
receiver.
1
Press and hold the Learn key until
release the Learn key.
blinks twice, then
1
• When you operate your registered cassette deck, CD player, DVD
player, Cable, DSS, DTV Decoder, VCR or TV, go to step 2.
2Press the numeric key to enter "9 - 9 - 2".
•
will blink twice.
• When you operate the CD player, Cassette deck, MD player, or
Tuner with system control connection, go to step 3.
3Press VID1 key once, then press the VID2 key once.
Press the SRC Power key.
2
3
• The user now can operate VID2 as a second VCR along with VID1.
• To return to the receiver operation mode, press the TUNER key for
more than 3 seconds.
• Refer to the table in the previous page for the combination of
source keys and the other components assignment.
°
Press the operation keys you desire.
y
4To re-assign other device keys, repeat steps 1through 3 by
substituting the key sequence from the below chart for the
most popular components:
The remote control mode remains at the selected input. If you
wish to operate another component, repeat step 2or 3.
Note
• Besuretopointtheremotecontrolattheremotesensoronthereceiver
when you want to operate KENWOOD components connected by
system control cords. Otherwise, point the remote control at the
component you want to operate.
To re-assign key
Sequence
Perform
• To initilize the remote control, press the Learn key until blinks twice.
Then press the numeric key to enter “9-8-1”. The blinks twice.
TV as 2nd VID1 key
TV as 2nd VID2 key
TV as 2nd CD/DVD key
TV back to TV
Remote Setup - 9- 9 - 2 VID1 - TV
Remote Setup - 9 - 9 - 2 VID2 - TV
Remote Setup - 9 - 9 - 2 CD/DVD - TV
Remote Setup - 9 - 9 - 2 TV - TV
VID1 as 2nd TV key
VID1 as 2nd VID2 key
VID1 as 2nd CD/DVD key
VID1 back to VID1
Remote Setup - 9 - 9 - 2 TV - VID1
Remote Setup - 9 - 9 - 2 VID2 - VID1
Remote Setup - 9 - 9 - 2 CD/DVD - VID1
Remote Setup - 9 - 9 - 2 VID1 - VID1
EN
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
Storing the remote control code of the other
components
The remote control unit can store the remote control code of the other
componentsandyoucanoperatetheothercomponentsfromtheremote
control unit. The remote control code is stored on the key or memory of
the remote control unit.
6Fromtheremotecontrolunitoftheothersource, pressthekey
that you want to store.
• The remote control code is sent to the remote control unit.
• “OK” appears when finished.
• If the code cannot be stored after a few attempts, “ERROR” will
appear. Repeat from step 2 onwards.
Storing on the key
6The remote control code is stored on the key of this remote
control unit.
You can store the remote control code to the key as shown below:
7Repeat step 4 or 6to store additional components until all
the desired components are stored.
8To exit the learning mode, press and hold the Learn key for 3
seconds until blinks twice.
DVD
6CH
CD
TUNER
VID3
VID1
VID2
DVD
Source keys
MD
TAPE
AV AUX
PHONO
TV
POWER
RCVR
9To clear the stored remote control code of the other sources:
P
o
w
ow
V P
C
e
R
S
e
r
T
SRC Power
4
0
5
1 Press and hold theLearn key for 3 seconds until blinks twice,
then release the Learn key.
3
6
Multi
2 Press the numeric key to enter “9-7-6”.
Enter
Numeric keys
2
7
Multi
3 Press the source key, then press the stored key twice until
blinks twice.
1
8
Page∞/5
9
+
10
+ 100
TV Mute
Return
Disc Skip
•
blinks twice to indicate that the stored remote control code are
deleted.
Page
AB
Return
Exit
OSD
OSD
Menu
LAST
/
Guide
Disc Skip
Menu
Disc Sel.
Mute
Disc Sel.
Input Sel.
¢
Tone
+
+
VOL
CH +/–
Skip ¢/4
CH
Sound
4
–
–
Bass
Boost
TV
VOL
TV Input
Band
–
+
Tune
–
Tune
+
¢Rewind
4Fast forward
Dimmer
Auto
Top Menu
3/8Play/Pause
Setup
Info/Flip
Loudness
2Flip
Listen Mode
7Stop
Speaker
EQ
DSP
Stereo
Mode
Input
Mode
Active
EQ
Learn
THX
Learn
1Point the infrared ray system part of another remote control
unit to the remote sensor of the remote control unit.
Remote control
unit of the other
source.
Infrared ray system part
2Press and hold the Learn key for 3 seconds until blinks
twice, then release the Learn key.
3Press the numeric key to enter “9-7-5”.
4Press any of the source keys (PHONO, VID1, VID2, VID3, DVD/
6CH, AV AUX, CD/DVD, MD/TAPE, TV ) to select the input of the
desired remote control unit.
• While in Tuner mode, learning code function will not be available.
5Press the desired key of the remote control unit.
• “LEARN” appears on the display.
EN
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
Setup code chart
DVD player setup codes
Cable setup codes
Maker
Setup codes
Maker
Setup codes
Aiwa
Apex Digital
0641
ABC
0003, 0008, 0014, 0017
0899
0014
0899
0755, 0796, 0672, 0717, 0794,
0795, 0797, 0830
0736
0655
0571
0521
0784
0634, 0490
0591
0591
0670
0717, 0522, 0815
0769, 0699
0715, 0783
0651
0717
0582, 0702
0573, 0664
0672
0702
0623, 0558, 0867
0717
0534, 0490, 0682
0711
0651
0798
0503, 0675
0782
0539
0522
0717
Americast
Bell & Howell
Bell South
Director
General Instrument
GoldStar
Audiologic
B&K
Blue Parade
DVD2000
Daewoo
Denon
Emerson
Enterprise
Fisher
0476
0003, 0276, 0476, 0810
0144
0009, 0273
0003, 0012, 0276, 0014, 0476,
0810
0000
0476, 0276, 0810, 1106
0237
0107, 0000
0000
0305, 0317
0144, 0533, 0877, 1877
0000
0000
0273, 0279
0000
0144
0008, 0017, 0477, 0877, 1877
1006
0003
0276
0012
0003
0000
0000, 0525, 0899
Hamlin
Jerrold
Memorex
Motorola
Pace
Panasonic
Paragon
Philips
Pioneer
Pulsar
Quasar
GE
GPX
Go Video
Gradiente
Greenhill
Harman/Kardon
Hitachi
Hiteker
JBL
JVC
KLH
Kenwood
Konka
Koss
Lasonic
Magnavox
Malata
Marantz
Microsoft
Mintek
Regal
Runco
Samsung
Scientific Atlanta
Sony
Starcom
Supercable
Tocom
Torx
Toshiba
Zenith
Mitsubishi
Nesa
0521
0717
Onkyo
0627, 0503
Oritron
0651
Panasonic
Philips
0490, 1490, 0632
0539, 0646, 0503
Pioneer
Polk Audio
Princeton
Proscan
RCA
0571, 0525, 0632
0539
0674
0522
0522, 0571, 0822, 0717
Rowa
0823
Sampo
0698
Samsung
Sanyo
0573, 0820
0670
Sherwood
Shinsonic
Sony
0633
0533
0533
Sylvania
Technics
Techwood
Theta Digital
Toshiba
Tredex
Urban Concepts
Yamaha
Zenith
0675
0490
0692
0571
0503
0800, 0799, 0803, 0804
0503
0545, 0490, 0817, 0539
0591, 0503
EN
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
Setup code chart
TV setup codes
Maker
Setup codes
Maker
Setup codes
AOC
Abex
Admiral
Advent
Adventura
Aiko
Aiwa
Akai
Alaron
America Action
Ampro
Anam
Apex Digital
Asha
0019,0030
0032
0093,0463
0761
Fisher
Fujitsu
Funai
Futuretech
GE
0154
0179, 0683
0180, 0171, 0179, 0800
0180
0021, 0047, 1347, 0051, 0178,
0251, 0451, 1147, 0747, 0804,
0807, 0809, 0811
0800
0017, 0019, 0030
0178, 0019, 0030, 0032, 0802,
0814
0056, 0053, 0800
0179, 0180
0768
0178
0179, 0800
0054
0180
0803
0093
0145, 0056, 0016, 0032, 0800
0054
0017
0054
0000
0053
0180, 0802, 0805
0803
0180, 0030
0216
0216
0030, 0019
0802
0707, 0632, 0628, 0638, 0703,
0902
0056
0154, 0047, 0054, 0156, 0178,
0747, 0802
0016, 0803
0800
0056
0800
0092, 0805
0701, 0800, 0802
0030
0179, 0216
0180, 0805
0751
0180
0765, 0748, 0767
0804
0180, 0092, 0451, 0623, 0805,
0802
0180
0019
0016, 0154
0804
0180
0019
0236, 0463, 0801, 0817, 0901
0803, 0805
0180
0802
0816, 0030, 0056
0030
0054
0000
0765
0451, 0092, 0805
0186, 0056, 0030, 0060, 0092,
0802, 0805, 0816
0803
0056
0180
0180, 0802, 0803, 0804
0054
0180
0060, 0030, 0016, 0047, 0054,
0056, 0093, 0145, 0154, 0166,
0451, 0466, 0702, 0747, 1147,
1347, 0809
Garrard
Gibralter
GoldStar
Gradiente
Grunpy
Haier
Hallmark
Harley Davidson
Harman/Kardon
Harvard
Harwood
Havermy
Hitachi
Infinity
Inteq
JBL
JCB
JVC
KEC
KLH
KTV
Kamp
Kawasho
Kenwood
Kodak
Audiovox
Baysonic
Belcor
Bell & Howell
Beaumark
Bradford
Brockwood
Broksonic
CCE
CXC
Calix
Candle
Carnivale
Carver
Celebrity
Changhong
Cineral
Citizen
Konka
Colt
LG
LXI
Concerto
Contec
Craig
Crosley
Crown
Logik
Llyod’s
Luxman
MGA
MGN Technology
MTC
Curtis Mathes
0150, 0019, 0030, 0178, 0804
0804
0060, 0030, 0019, 0056, 0216,
0800, 0804
Cybernex
Daewoo
0804
Magnasonic
Magnavox
0816
0092, 0623, 0019, 0451, 0816,
0805
0019
0145
0017, 0019
0720, 0774
0800
0000
0802
0054, 0030, 0179, 0186, 1254,
1454, 0800, 0818
0804
0016
0054, 0030, 0444
0802
0250, 0806
0145, 0178
0179, 0463, 0178, 0016, 0150,
0154, 0250, 0800, 0802, 0804,
0810, 0806, 0812, 0814, 0815
0017, 0032, 0047, 0051, 0747
0021
Daytron
Denon
Dumont
Dwin
Magnin
Majestic
Marantz
Marta
Matsushita
Megatron
Memorex
Dynatech
Electroband
Electrohome
Electrophonic
Emerson
0802
0236, 0180, 0178, 0179, 0463,
0623, 0019, 0154, 0801, 0805,
0816, 0800, 0802, 0817
Midland
Minutz
Envision
0030
Mitsubishi
0150, 0178, 0019, 0093, 0807
EN
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
Setup code chart
Maker
Setup codes
Maker
Setup codes
Motorola
Multitech
NAD
NEC
NTC
Nikko
Noblex
Onwa
0093
Shintom
Signature
Simpson
Sony
Soundesign
Squareview
Starlite
0803
0016
0186
0180, 0800, 0803
0156, 0166, 0178
0030, 0019, 0056, 0434, 0497
0092
0178, 0030, 0092, 0802
0804
0000, 1100, 0800, 0813
0178, 0179, 0180, 0186
0171
0180
0000
0180
Supreme
Sylvania
Optimus
0250, 0166, 0154, 0806, 0812,
0815, 0802
0054, 0171, 0030, 0800, 0818,
0903
Optonica
Orion
Panasonic
0093
Symphonic
TMK
TNCi
Tandy
Tatung
0171, 0180, 0800
0056, 0178, 0804
0017
0093
0396
0800
0051, 0250
0179
0463, 0179, 0236, 0801, 0817
0051, 0250, 0806, 0812, 0815,
0809, 0907
0047, 1347, 0060, 0030, 0021,
0178, 0051, 0019, 0032, 0156,
0747, 0804, 0802, 0809, 0814
0145, 0019, 0030, 0054, 0463
0054, 1454, 0904
0019, 0030, 0802
0166, 0679
0019, 0092
0717
0051
0804
0047, 0747, 0811
0466, 0178
0803
0017, 0019
0051, 0250, 0812, 0806, 0809
0047, 1347, 1147, 0679, 1247,
0019, 0090, 0747, 1047, 1547,
0811, 0804, 0807, 0809, 0905
0180, 0030, 0178, 0154, 0019,
0032, 0047, 0056, 0747, 0800,
0810
Penney
Teac
Technics
Technol Ace
Techwood
Teknika
Philco
Philips
Pilot
0051, 0056
0186, 0016, 0054, 0179, 0180,
0019, 0092, 0056, 0060, 0150,
0800, 0802
0056, 0702
0800
0156, 0060, 0154,1256, 0808,
0906, 0901
0802, 0804
0804
Pioneer
Portland
Princeton
Prism
Profitronic
Proscan
Proton
Protec
Pulsar
Telefunken
Thomas
Toshiba
Totevision
Unitech
Vector Research
Victor
Videomagic
Vidikron
Vidtech
0030
0053
Quasar
RCA
0802, 0804
0242, 0054
0019, 0178
0800
0054, 0178, 0016, 0019, 0021,
0030, 0056, 0179, 0800, 0804,
0803
RadioShack
Villain
Wards
Radix
Randex
Realistic
0802
0802
Waycon
White Westinghouse
XR-1000
Yamaha
Zenith
0156
0180, 0154, 0030, 0178, 0019,
0032, 0056, 0800, 0802
0216
0251, 0603, 0017, 0497, 0030
0019, 0180
0030, 0032
0623, 0463, 0803, 0816
0803, 0800
0019, 0030, 0769
0017, 0016, 0092, 0463, 0800,
0817
Rhapsody
Runco
SSS
Sampo
Samsung
0060, 0019, 0178, 0766, 0030,
0032, 0056, 0427, 0702, 0804
Sansei
Sansui
Sanyo
Scimitsu
Scotch
Scott
0451
0463, 0800, 0817, 0901
0154, 0804
0019
0178
0236, 0019, 0178, 0179, 0180
Sears
0154, 0156, 0047, 0054, 0056,
0171, 0178, 0179, 0747, 0800,
0802, 0814
Semivox
Semp
0180
0156
Singer
Sharp
Shogun
0803
0093, 0688, 0689, 0807, 0900
0019, 0804
EN
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
Setup code chart
VCR setup codes
Maker
Setup codes
Maker
Setup codes
Admiral
American High
Bell & Howell
Broksonic
Canon
0048, 0209
0035
0104
0121, 0184, 0209, 1479
0035
0081
0047
0035, 0060, 0162, 0760
0045
0042
0032
Sanyo
Scott
Sears
Semp
Sharp
Sonic Blue
Sony
Sylvania
Technics
Teknika
Tivo
Toshiba
Vector
0047, 0104
0184, 0121, 0043, 0045
0042, 0035, 0047, 0104
0045
0048, 0848
0614, 0616
0033, 0032, 0636, 0035, 1032
0035, 0081, 0043
0035, 0162
0035
0618, 0636
0045, 0043
0045
0038
0045
0035, 0060, 0047, 0042, 0048,
0081, 0149, 0760
0209
0035
0038
Carver
Craig
Curtis Mathes
Daewoo
Denon
Emerex
Emerson
Fisher
0184, 0209, 0121, 0479, 0043
0047, 0104
0033, 0035
0035, 0060, 0760
0432
0038
0047
Vector Research
Video Concepts
Wards
Fuji
GE
Go video
GoldStar
HI-Q
Harman/Kardon
Hitachi
White Westinghouse
XR-1000
Yamaha
0038, 0081
0042
Zenith
0039, 0479, 0033, 0209
Hughes Network
Systems
JVC
0042
0067
Kenwood
Kodak
0067, 0038
0035
MEI
0035
MGA
0043
Magnavox
Marantz
Matsushita
Memorex
0035, 0081, 0563, 0039, 0149
0081, 0035
0035, 0162
0104, 0047, 0479, 0048, 0035,
0039, 0162, 0209
Minolta
Mitsubishi
Motorola
NEC
Olympus
Optimus
0042
0043, 0067
0035, 0048
0038, 0067, 0104
0035
0162, 0048, 1062, 1048, 0104,
0432
Orion
0479, 0184, 0209
0035, 0162, 1062, 0225, 0616
0035, 0042, 0038
0042
0035, 0209, 0479
0081, 0035, 0618, 1081, 1181
0067
0081
0060, 0760
0039
Panasonic
Penney
Pentax
Philco
Philips
Pioneer
Polk Audio
Proscan
Pulsar
Quasar
RCA
Realistic
ReplayTV
Runco
0035, 0162
0060, 0042, 0149, 0760
0104, 0047, 0048, 0035
0614, 0616
0039
STS
0042
Samsung
Sanky
0045
0039, 0048
Sansui
0479, 0067, 0209
EN
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
Setup code chart
DSS setup codes
Cassette deck setup codes
Maker
Setup codes
Maker
Setup codes
Alpha Star
Chaparral
Crossdigital
DishPro
Echostar
Expressvu
GE
0772
0216
1109
1005, 0775
1005, 0775
0775
0566
0775
Kenwood
0071, 0070, 0092, 0183, 0205,
0233, 0234, 0251, 0386
Receiver setup codes
GOI
Maker
Setup codes
General Instrument
HTS
0869
0775
Kenwood
1570
Hitachi
0819
Hughes Network
Systems
JVC
0749, 1749, 1142
0775
Magnavox
Memorex
Mitsubishi
Motorola
Next Level
Panasonic
Paysat
0722, 0724
0724
0749
0869
0869
CD and MD player setup codes
Maker
Setup codes
Kenwood
0028, 0190, 0338, 0339, 0826,
0037, 0340, 0523, 0626, 0677,
0247, 0701
0724
0858, 0859, 0681, 1490
Philips
1076, 1142, 0722, 0724, 0749,
1749
Proscan
RCA
RadioShack
SKY
Samsung
Sony
Star Choice
Toshiba
Uniden
Zenith
0392
Setup codes for Kenwood components with System Control
connection
0566, 0392, 0143, 0855
0869
0856
1109
0639
0869
0749, 0790, 1749
0724, 0722
0856, 1856
Component
Setup codes
CD
MD
Cassette Deck
1338
1339
1340
DTV Decoders setup codes
Maker
Setup codes
Panasonic
Pioneer
1120
1010
Princeton
Samsung
Sensory Science
Sharp
0113, 0295
1190
1126
1010
EN
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
CASSETTE deck, CD player & MD recorder operations
You can perform these basic operations using the keys described below when connected to KENWOOD cassette deck, CD player or MD recorder
equipped with system control operations.
)
Cassette deck operations keys
CD player operation keys
CD
DVD
6CH
CD
DVD
6CH
VID1
VID2
TUNER
VID3
VID1
VID2
TUNER
DVD
DVD
MD
TAPE
MD
TAPE
AV AUX
VID3
AV AUX
PHONO
TV
PHONO
TV
POWER
RCVR
POWER
RCVR
SRC Power
(Source power)
o
w
o
w
SRC Power
4
0
5
4
5
(Source power)
3
6
3
6
Multi
Multi
Enter
Numeric keys
(Select tracks)
Enter
2
7
2
7
Multi
Multi
1
8
1
8
+100
(Select tracks)
9
0
9
+
10
+100
+
10
+100
TV Mute
TV Mute
Disc Sel.
Page
A/B
Page
A/B
A/B
(Cassette Deck
selection)
Return
Exit
OSD
Guide
(Disc selection)
Return
Exit
OSD
Guide
LAST
/
LAST
/
Disc Skip
Menu
Disc Skip
Menu
Disc Sel.
Disc Sel.
Mute
Mute
Input Sel.
Input Sel.
Disc Skip
¢
¢
+
+
VOL
–
Tone
+
+
VOL
–
¢(Skip up)
4(Skip down)
Tone
CH
CH
Sound
Sound
4
4
–
–
TV
Bass
Boost
Bass
Boost
TV
TV Input
+
TV Input
–
+
–
VOL
VOL
1(Rewind)
1(Search)
Tune
–
Band
Tune
+
Tune
–
Band
Tune
+
8(Pause)
¡(Fast Forward)
¡(Search)
Dimmer
Auto
Top Menu
Dimmer
Auto
Top Menu
¶
(Record)
(3Play)
Setup
Setup
Info/Flip
Info/Flip
7(Stop)
7(Stop)
Loudness
Loudness
Listen
Mode
3
/
8
Listen
Mode
3/8(Play/pause)
Remote
Setup
DSP
Remote
Setup
DSP
Stereo
Stereo
Mode
Mode
2(Reverse play)
Active
EQ
Input
Mode
Speaker
EQ
Active
EQ
Input
Mode
Speaker
EQ
THX
THX
REMOTE CONTROL UNIT RC-R0820
REMOTE CONTROL UNIT RC-R0820
MD recorder operation keys
CD
DVD
6CH
VID1
VID2
TUNER
VID3
DVD
MD
TAPE
AV AUX
PHONO
TV
POWER
RCVR
o
w
SRC Power
(Source power)
4
0
5
3
6
Multi
Enter
2
7
Numeric keys
(Select tracks)
Multi
1
8
+100
(Select tracks)
9
+
10
+100
TV Mute
Page
A/B
Return
Exit
OSD
Guide
LAST
/
Disc Skip
Menu
Disc Sel.
Mute
Input Sel.
¢
+
CH
+
VOL
–
Tone
¢(Skip up)
4(Skip down)
Sound
4
–
TV
Bass
Boost
TV Input
+
–
VOL
1 (Search)
¡ (Search)
Tune
–
Band
Tune
+
8
(Pause)
Dimmer
Auto
Top Menu
Setup
Info/Flip
3
/
8
(3Play)
Loudness
¶(Record)
Listen
Mode
Remote
Setup
DSP
Stereo
Mode
7(Stop)
Active
EQ
Input
Mode
Speaker
EQ
THX
REMOTE CONTROL UNIT RC-R0820
EN
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
Other components’ operations
Refer to the following for the type of remote control operations available for each component.
• When pressing keys in succession, press each key firmly and be sure
1 Select the input source.
to wait at least 1 second before pressing the next key.
• Numeric keys function the same as the numeric keys on the original
remote.
2 Press the keys corresponding to the operations you desire.
Refer to the following sections for details.
These keys can be used to perform the basic operations of KENWOOD and other manufacturers’ components which the setup code for each
component had been entered beforehand.
q
TV operation keys
VCR operation keys
CD
CD
DVD
6CH
DVD
6CH
VID1
VID2
TUNER
VID3
VID1
VID2
TUNER
VID3
DVD
DVD
MD
TAPE
MD
TAPE
AV AUX
AV AUX
PHONO
TV
PHONO
TV
POWER
RCVR
POWER
RCVR
w
w
SRC Power
(Source power)
TV Power
4
0
5
4
0
5
%(Cursor up)
fi(Cursor down)
@Cursor left)
3
6
3
6
Multi
Multi
%(Cursor up)
Numeric keys
Enter
Numeric keys
fi(Cursor down)
@Cursor left)
#(Cursor right)
Enter
Enter
2
7
2
7
#(Cursor right)
Enter
Multi
Multi
1
8
1
8
9
9
Exit
Exit
Guide
Menu
+
10
+100
TV Mute
+
10
+100
TV Mute
TV mute
Page
A/B
Page
A/B
Return
Exit
OSD
Guide
Return
Exit
OSD
Guide
Input Sel.
LAST
/
LAST/
LAST
Disc Skip
Menu
Guide
Menu
Disc Skip
Menu
(Input selection)
Disc Sel.
Disc Sel.
Mute
Mute
(Last channel)
Last
Input Sel.
Input Sel.
¢
¢
+
CH
+
VOL
–
+
CH
+
VOL
–
(Last channel)
Tone
Tone
CH + / –
CH + / –
Sound
Sound
(Channel + / –)
(Channel + / –)
4
4
–
–
TV Input
TV
VOL
Bass
Boost
TV
VOL
Bass
Boost
TV Input
TV Input
+
+
–
–
Tune
TV VOL
Tune
–
Band
Tune
+
–
Band
Tune
+
1(Rewind)
¡(Fast Forward)
Dimmer
Auto
Top Menu
Dimmer
Auto
Top Menu
¶
(Record)
(3Play)
Setup
Setup
Info/Flip
Info/Flip
Loudness
Loudness
Listen
Mode
Listen
Mode
8(Pause)
3
/
8
2(Display)
Remote
Setup
Remote
Setup
DSP
DSP
Stereo
Stereo
Mode
Mode
2
(Display)
Active
EQ
Input
Mode
Speaker
EQ
Active
EQ
Input
Mode
Speaker
EQ
THX
THX
7(Stop)
REMOTE CONTROL UNIT RC-R0820
REMOTE CONTROL UNIT RC-R0820
EN
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic remote control operations for other components
DSS operation keys
Cable operation keys
CD
CD
DVD
6CH
DVD
6CH
VID1
VID2
TUNER
VID3
VID1
VID2
TUNER
VID3
DVD
DVD
MD
TAPE
MD
TAPE
AV AUX
AV AUX
PHONO
TV
PHONO
TV
POWER
RCVR
POWER
RCVR
o
w
o
w
SRC Power
SRC Power
(Source power)
%(Cursor up)
4
0
5
(Source power)
4
0
5
%(Cursor up)
3
6
3
6
fi(Cursor down)
@Cursor left)
#(Cursor right)
Multi
Multi
fi(Cursor down)
@Cursor left)
#(Cursor right)
Enter
Numeric Keys
Enter
Enter
2
7
2
7
Numeric keys
Enter
Multi
Multi
1
8
1
8
Page ∞/5
9
9
Exit
Guide
Menu
+
10
+100
TV Mute
+
10
+100
TV Mute
(Page down or up)
Guide
Menu
Last
Page
A/B
Page
A/B
Return
Exit
OSD
Guide
Return
Exit
OSD
Guide
(Last channel)
Exit
LAST
/
LAST/
Disc Skip
Menu
Disc Skip
Menu
Disc Sel.
Disc Sel.
Mute
Mute
Input Sel.
Last
Input Sel.
Input Sel.
(Input selection)
¢
Input Sel.
¢
+
CH
+
VOL
–
+
CH
+
VOL
–
(Last channel)
Tone
Tone
(Input selection)
Sound
Sound
4
4
–
–
CH + / –
TV
Bass
Boost
TV
Bass
Boost
TV Input
TV Input
+
+
–
CH + / –
–
Tune
VOL
VOL
Tune
–
Band
Tune
+
–
Band
Tune
+
(Channel + / –)
(Channel + / –)
Dimmer
Auto
Top Menu
Dimmer
Auto
Top Menu
Setup
Setup
Info/Flip
Info/Flip
Loudness
Loudness
Info
Listen
Mode
Listen
Mode
Info
Remote
Setup
Remote
Setup
DSP
DSP
(Information)
Stereo
Stereo
Mode
Mode
(Information)
Active
EQ
Input
Mode
Speaker
EQ
Active
EQ
Input
Mode
Speaker
EQ
THX
THX
REMOTE CONTROL UNIT RC-R0820
REMOTE CONTROL UNIT RC-R0820
DVD player operation keys
CD
DVD
6CH
VID1
VID2
TUNER
VID3
DVD
MD
TAPE
AV AUX
PHONO
TV
POWER
RCVR
o
we
SRC Power
(Source power)
4
0
5
%(Cursor up)
3
6
Numeric keys
(Select tracks)
Multi
fi(Cursor down)
@Cursor left)
#(Cursor right)
Enter
2
7
Enter
Multi
1
8
Page ∞/5
9
+
10
+100
TV Mute
(Page down or up)
+100
Page
A/B
Return
Exit
OSD
Guide
OSD (On Screen Display)
Menu
Disc Skip
Return
LAST
/
Disc Skip
Menu
Disc Sel.
Mute
Disc Sel.
Input Sel.
(Disc selection)
¢
+
CH
+
VOL
–
Tone
Sound
1(Search)
¡(Search)
4
¢Skip up
4Skip down
–
TV
Bass
Boost
TV Input
+
–
VOL
Tune
–
Band
Tune
+
Dimmer
Auto
Top Menu
Top Menu
8(Pause)
Setup
Info/Flip
(Title)
Loudness
Listen
Mode
Remote
Setup
DSP
Stereo
Mode
7(Stop)
3
/8
(3Play)
Active
EQ
Input
Mode
Speaker
EQ
THX
REMOTE CONTROL UNIT RC-R0820
Notes
1. Certain codes may only operate some of the function available on a given model.
2. The above show the typical type functions available for each component. Some manufacturers use different key combinations to perform similar
functions. For that reason, we have programmed extra functions on some of the unused number keys to help you control your equipment.
EN
48
Download from Www.Somanuals.com. All Manuals Search And Download.
In case of difficulty
Resetting the Microcomputer
The microcomputer may malfunction (unit cannot be operated, or
shows an erroneous display) if the power cord is unplugged while
the power is ON, or due to some other external factor. If this
happens, execute the following procedure to reset the
microcomputer and return the unit to its normal operating
condition.
Unplug the power cord from the wall outlet, then plug it
back in while holding down the POWER ON/STANDBY
key.
•Pleasenotethatresettingthemicrocomputerwillclearthecontents
of the memory and returns the unit to the state it was in when it left
the factory.
Amplifier
Symptom
Cause
Remedy
No sound from the speakers.
• The speaker cords are disconnected.
• Connect them properly referring to
“Connecting the speakers”
• Adjust the volume to a proper level.
• Turn OFF the MUTE.
%
• VOLUME is set to the minimum position.
• MUTE is ON.
• The SPEAKERS switches are set to OFF.
∞
¢
• Set the SPEAKERS switches to ON.
The standby indicator blinks and sound is • Speaker cords are short-circuited.
not output.
• Turn the power off, eliminate the short-
circuiting, then turn on the power again.
Soundisnotoutputfromoneofthespeakers. • The speaker cord is disconnected.
• Connect it properly referring to “Connecting
the speakers”.
%
Sound is not output from the surround • The surround speaker cords and/or the center • Connect it properly referring to “Connecting
speakers and / or the center speaker, or their
sound is very small.
speaker cord is disconnected.
• A surround mode has not been engaged.
• The surround and/or center volume controls • Adjust the speaker levels using the test tone.
are set to the minimum level.
the speakers”.
• Select a surround mode.
%
∞
A humming noise is generated when the • The audio cord from the record player is not • Insert the audio cord plugs securely into the
PHONO input selector is selected.
connected to the PHONO jacks.
• The record player is not grounded.
PHONO jacks.
• Connect the grounding wire to the GND
terminal on the rear panel.
When playing a Dolby Digital source signal • There are many possible causes for this • Set the input mode to digital manual before
using a DVD player, the sound is cut off soon
after it starts.
problem, depending on the type of DVD player
used.
starting playback of the Dolby Digital source.
8
No sound is produced during playback from • The input mode is set to digital manual.
a DVD player.
• Press the INPUT MODE key to select to full
auto mode.
8
A video source cannot be recorded
normally.
• The software is copy-guarded.
• Copy-guarded video software cannot be
recorded.
Tuner
Symptom
Cause
Remedy
Radio stations cannot be received.
• No antenna is connected.
• The broadcast band is not set properly.
• Connect an antenna.
• Set the broadcast band properly.
(
• The frequency of the desired station is not • Tune the frequency of the desired station.
tuned.
•
Interference.
• Noiseduetoignitionnoisefromanautomobile. • Install the outdoor antenna away from the
road.
• Noise due to interference from an electric • Turn off the power to the appliance.
appliance.
• Noise due to a nearby TV set.
• Install the receiver farther away from the TV.
A station which was preset cannot be • The preset station belongs to a frequency that • Preset a station with a receivable frequency.
received by pressing the corresponding
numeric key.
cannot be received.
• The preset memory was cleared because the • Preset the station again.
power cord had been unplugged for a long
period of time.
EN
49
Download from Www.Somanuals.com. All Manuals Search And Download.
In case of difficulty
Remote control unit
Symptom
Cause
Remedy
Certain inputs cannot be selected using the
remote control.
• No setup codes registered for the respective • Registerasetupcodeattherespectiveinput(s).
input(s).
q
Remote control operation is not possible.
• Theremotecontrolissettoadifferentoperation • Press any of the Input selector keys to select
mode.
the appropriate operation mode.
• Batteries are exhausted.
• Replace with new batteries.
• The remote control unit is too far away from • Operate the remote control unit within the
the main system, controlling angle is too large,
or there is an obstacle between the receiver
and the remote.
controllable range.
• The audio cords and system control cords are • Connect properly referring to “Setting up the
not connected properly. system”.
• No tape or CD is placed in the source • Place the tape or CD in the source component
component. which you want to play.
• An attempt is made to play a tape which is • Wait until recording has completed.
being recorded in the cassette deck.
• The remote control has not been set to the • Press any of the source keys or SRC Power
operation mode for the component you wish
to control.
key to activate the operation mode for the
component you want to control before
operation.
°
EN
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Caution : Read this page carefully to ensure safe
operation.
Specifications
AUDIO section
Rated power output during STEREO operation
100 watts per channel minimum RMS, both channels driven,
at 8 Ω from 20 Hz to 20 kHz with no more than 0.09% total
harmonic distortion. (FTC)
VIDEO section
VIDEO inputs / outputs
VIDEO (composite) ..................................................1 Vp-p / 75 Ω
S VIDEO inputs /outputs
Effective power output during SURROUND operation
S VIDEO (luminance signal) ...................................1 Vp-p / 75 Ω
S VIDEO (chrominance signal) ....................... 0.286 Vp-p / 75 Ω
COMPONENT VIDEO inputs /outputs
FRONT (20 ~ 20 kHz, 0.09 % T.H.D. at 8 Ω one channel driven)
............................................................................... 100 W + 100 W
CENTER (20 ~ 20 kHz, 0.09 % T.H.D. at 8 Ω one channel
driven) .................................................................................. 100 W
SURROUND (20 ~ 20 kHz, 0.7 % T.H.D. at 8 Ω one channel
driven) ................................................................... 100 W + 100 W
SURROUND BACK/SUBWOOFER (20 ~ 20 kHz, 0.09 % T.H.D.
at 8 Ω one channel driven)................................................. 100 W
Total harmonic distortion .......................0.009 % (1 kHz, 50 W, 8 Ω)
Frequency response
(CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH)
................................................. 10 Hz ~ 100 kHz, +0 dB ~ –3.0 dB
PHONO ‘RIAA’ response ..............40 Hz ~ 20 kHz, +1.5 dB ~ –3.0 dB
Maximum input level
PHONO (MM) ....................................45 mV, 1 % T.H.D. at 1 kHz
Signal to noise ratio (IHF’66)
PHONO (MM) ........................................................................ 75 dB
(CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH)
............................................................................................... 95 dB
Loudness control
COMPONENT VIDEO (luminance signal) .............. 1 Vp-p / 75 Ω
COMPONENT VIDEO (CB/CR-signal) ............ 0.32 Vp-p / 75 Ω
FM tuner section
Tuning frequency range................................. 87.5 MHz ~ 108.0 MHz
Usable sensitivity (MONO)..................................................................
......................... 1.3 µV (75 Ω)/ 13.2 dBf (75 kHz dev, SINAD 30 dB)
50 dB quieting sensitivity
STEREO ..................................................... 28 µV (75 Ω)/ 40.2 dBf
Total harmonic distortion
MONO (1 kHz, 75 kHz dev) .......................... 0.5% (65 dBf input)
STEREO (1 kHz, 67.5 + 6.75 kHz dev) ......... 0.7% (65 dBf input)
Signal to noise ratio
MONO (1 kHz, 75 kHz dev) ........................ 75 dB (65 dBf input)
STEREO (1 kHz, 67.5 + 6.75 kHz dev) ....... 68 dB (65 dBf input)
Stereo separation (1 kHz) ........................................................... 40 dB
Selectivity ( 400 kHz) ................................................................. 70 dB
Frequency response (30 Hz ~ 15 kHz) .................... +0.5 dB, –3.0 dB
VOLUME at –30 dB level ...................................... +6 dB (100 Hz)
Input sensitivity / impedance
PHONO (MM) ........................................................ 4.0 mV / 47 kΩ
(CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH)
.............................................................................. 320 mV / 47 kΩ
Output level / impedance
TAPE REC ............................................................... 320 mV / 1 kΩ
PRE OUT (FRONT, CENTER, SURROUND) ...............1 V / 500 Ω
PRE OUT (SURROUND BACK CHANNEL) ............... 1 V / 500 Ω
PRE OUT (SUBWOOFER) .......................................... 1 V / 500 Ω
Tone control
AM tuner section
Tuning frequency range
10 kHz step .................................................. 530 kHz ~ 1,700 kHz
Usable sensitivity (30% mod, S/N 20 dB) ..........................................
................................................................................16 µV / (600 µV/m)
Signal to noise ratio (30% mod, 400 Hz) ............................................
.................................................................. 50 dB (60 dBµV EMF input)
BASS................................................................ 10 dB (at 100 Hz)
TREBLE ............................................................ 10 dB (at 10 kHz)
GENERAL
Power consumption ...................................................................... 3 A
AC outlet
DIGITAL AUDIO section
SWITCHED ......................................... (total 150 W, 1.25 A max.)
Dimensions..................................................... W : 440 mm(17-5/16")
Sampling frequency ...................... 32 kHz, 44.1 kHz, 48 kHz, 96 kHz
Input level / impedance / wave length
H
D
: 159 mm (6-1/4")
: 392 mm(15-7/16")
Optical ........................... (–15 dBm ~ –24 dBm), 660 nm 30 nm
Coaxial................................................................... 0.5 Vp-p / 75 Ω
Output level / impedance / wave length
Weight (Net) .............................................................. 9.4 kg (20.7 lb)
Optical ........................... (–21 dBm ~ –15 dBm), 660 nm 30 nm
Notes
1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.
2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).
EN
51
Download from Www.Somanuals.com. All Manuals Search And Download.
For your records
Record the serial number, found on the back of the unit, in the spaces
designated on the warranty card, and in the space provided below. Refer
to the model and serial numbers whenever you call upon your dealer for
information or service on this product.
Model__________________ Serial Number________________________
EN
52
Download from Www.Somanuals.com. All Manuals Search And Download.
|