STEREO CASSETTE TAPE DECK
KXF-W1030
KXF-W3030
CT-401
CT-403
INSTRUCTION MANUAL
KENWOOD CORPORATION
B60-4546-08 (EN)
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Special features
3
Double cassette decks:
Dolby Noise Reduction:
Dubbing facility:
Deck A can be used for playback only and deck B can be used for both playback and
recording.
The Dolby B NR system minimizes the tape hiss noise felt by human ears by processing
signals during playback and recording.
This convenient function allows to copy the prerecorded tape in deck A onto a tape in
deck B.
Caution : Read the pages marked
carefully to ensure safe operation.
Contents
Introduction ........................................................................................ 2
Before applying power ................................................................... 2
Safety precautions ........................................................................... 2
Special features ....................................................................................... 3
Accessories ............................................................................................... 3
IMPORTANT SAFEGUARDS ..................................................... 4
System connections ......................................................................... 6
Controls and indicators (CT-401/KXF-W1030) .......................... 8
Controls and indicators (CT-403/KXF-W3030) .......................... 9
Listening to cassette tapes .......................................................... 10
Preparation .............................................................................................. 10
Normal playback .................................................................................... 10
Relay playback (CT-403/KXF-W3030 only) ..................................... 11
Convenient music search (DPSS) .............................................. 12
Skip play operation ............................................................................... 12
Single-tune repeated playback operation ................................. 13
How to record (deck B only) ....................................................... 14
Tape dubbing operation ................................................................ 16
Convenient CD recording (deck B only)................................... 17
For pleasant use .............................................................................. 18
Maintenance ........................................................................................... 18
In case of difficulty ........................................................................ 19
Specifications ........................................................................... 20
Accessories
AC plug adaptor........... (1)
Audio cord.................... (2)
System control cord ... (1)
(Except for Europe and Australia)
For the unit with an European AC
plug in areas other than Europe.
Caution on condensation
WARNING NOTICE:
IN MOST CASES IT IS AN INFRINGMENT OF COPY-
RIGHT TO MAKE COPIES OF TAPES OR DISCS WITH-
OUT THE PERMISSION OF THE COPYRIGHT OWNERS.
ANYONE WISHING TO COPY COMMERCIALLY AVAIL-
ABLE TAPES OR DISCS SHOULD CONTACT THE ME-
CHANICAL COPYRIGHT PROTECTION SOCIETY
LIMITED OR THE PERFORMING RIGHTS SOCIETY LIM-
ITED.
Condensation (of dew) may occur inside the unit when there is
a great difference in temperature between this unit and the
outside.
This unit may not function properly if condensation occurs. In
this case, leave the unit for a few hours with the power left
ON, and restart the operation after the condensation has dried
up.
Be specially cautious against condensation in a
following circumstance:
When this unit is carried from a place to another across a large
difference in temperature, when the humidity in the room
where this unit is installed increases, etc.
Dolby noise reduction manufactured under license from Dolby
Laboratories Licensing Corporation.
“DOLBY” and the double-D symbol are trademarks of Dolby
Laboratories Licensing Corporation.
Download from Www.Somanuals.com. All Manuals Search And Download.
Caution : Read this page carefully to ensure
safe operation.
IMPORTANT SAFEGUARDS
Please read all of the safety and operating instructions
before operating this appliance. Adhere to all warnings on
the appliance and in the instruction manual. Follow all the
safety and operating instructions. These safety and
operating instructions should be retained for future
reference.
6. Temperature – The appliance may not function
properly if used at extremely low, or freezing
temperatures. The ideal ambient temperature is
above +5°C (41°F).
4
7. Heat – The appliance should be situated away from
heat sources such as radiators, heat registers, stoves,
or other appliances (including amplifiers) that produce
heat.
1. Power sources – The appliance should be connected to
apowersupplyonlyofthetypedescribedintheinstruction
manual or as marked on the appliance. If you are not sure
of the type of power supply to your home, consult your
appliance dealer or local power company. For appliances
intended to operate from battery power, or other sources,
refer to the instruction manual.
8. Electric shock – Care should be taken so that objects
do not fall and liquid is not spilled into the enclosure
through openings. If a metal objects, such as a hair
pin or a needle, comes into contact with the inside of
this appliance, a dangerous electric shock may result.
For families with children, never permit children to
put anything, especially metal, inside this appliance.
2. Power-cord protection – Power-supply cords should
be routed so that they are not likely to be walked on
or pinched by items placed upon or against them,
pay particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the
appliance.
Never pull or stretch
the cord.
9. Enclosure removal – Never remove the enclosure.
If the internal parts are touched accidentally, a serious
electric shock might occur.
3. CAUTION – Polarization – This appliance may be
equipped with a polarized alternating-current line plug (a
plug having one blade wider than the other). This plug will
fit into the power outlet only one way. This is a safety
feature. If you are unable to insert the plug fully into the
outlet, try reversing the plug. If the plug should still fail to
fit, contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug.
10.Magnetic fields – Keep the appliance away from
sources of magnetic fields such as TV sets, speaker
systems, radios, motorized toys or magnetized
objects.
4. Ventilation – Slots and openings in the cabinet are
provided for ventilation and to ensure reliable operation of
the appliance and to protect it from overheating, and these
openings must not be blocked or covered. The appliance
should be situated so that its location or position does not
interfere with its proper ventilation.
11.Cleaning – Unplug this appliance from the wall
outlet before cleaning. Do not use volatile solvents
such as alcohol, paint thinner, gasoline, or benzine,
etc. to clean the cabinet. Use a clean dry cloth.
To maintain good ventilation, do not put records or a table-
cloth on the appliance. Place the appliance at least 10 cm
away from the walls.
Do not use the appliance on a bed, sofa, rug or similar
surface that may block the ventilation openings. This
appliance should not be placed in a built-in installation such
as a bookcase or rack unless proper ventilation is provided
or the manufacturer’s instructions have been adhered to.
12.Accessories – Do not place this appliance on an unstable
cart, stand, tripod, bracket, or table. The appliance may fall,
causing serious injury to a child or adult, and serious
damage to the appliance. Use only with a cart, stand,
tripod,bracket,ortablerecommendedbythemanufacturer,
or sold with the appliance. Any mounting of the appliance
should follow the manufacturer’s instructions, and should
use a mounting accessory recommended by the
manufacturer. An appliance and cart combination should
be moved with care. Quick stops, excessive force, and
uneven surfaces may cause the appliance and cart
combination to overturn.
5. Water and moisture – The appliance should not be
used near water - for example, near a bathtub,
washbowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool, etc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Caution : Read this page carefully to ensure safe operation.
IMPORTANT SAFEGUARDS
13.Lightning – For added protection for this appliance during
a lightning storm, or when it is left unattended and unused
for long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent
damage to the appliance due to lightning and power-line
surges.
18.Power lines – An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such
power lines or circuits. When installing an outside antenna
system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them
might be fatal.
5
14.Abnormal smell – If an abnormal smell or smoke is
detected, immediately turn the power OFF and unplug
theappliancefromthewalloutlet. Contact your dealer or
19.AC outlets – Do not connect other audio equipment
with a power consumption larger than that specified
to the AC outlet on the rear panel. Never connect
other electrical appliances, such as an iron or toaster,
to it to prevent fire or electric shock.
nearest service center.
POWER OFF!
15.Damage requiring service – The appliance should
be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been
damaged.
B. Objects have fallen, or liquid has been spilled
into the appliance.
C. The appliance has been exposed to rain or
20. Overloading – Do not overload wall outlets, extension
cords, or integral convenience receptacles as this can
result in a risk of fire or electric shock.
water.
D. The appliance does not appear to operate
normally by following the instruction manual. Adjust only
those controls that are covered by the instruction manual
as an improper adjustment of other controls may result in
damageandwilloftenrequireextensiveworkbyaqualified
technician to restore the appliance to its normal operation.
E. The appliance has been dropped, or the
enclosure damaged.
21. Attachment – Do not use attachments not recommended
by the appliance manufacturer as they may cause hazards.
22. Replacementparts–Whenreplacementpartsarerequired,
be sure the service technician has used replacement parts
specified by the manufacturer or have the same
characteristics as the original parts. Unauthorized
substitutions may result in fire, electric shock, or other
hazards.
F. Theapplianceexhibitsamarkedchangeinperformance.
16.Servicing – The user should not attempt to service
the appliance beyond that described in the instruction
manual. All other servicing should be referred to
qualified service personnel.
23. Safety check – Upon completion of any service or repairs
to this appliance, ask the service technician to perform
safety checks to determine that the appliance is in proper
operating condition.
17.Outdoor antenna grounding – If an outside antenna
is connected to the appliance, be sure the antenna
system is grounded so as to provide some protection
against voltage surges and built up static charges.
Article 810 of the National Electrical Code
ANSI/
NFPA 70, provides information with respect to proper
grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge
unit, size of grounding conductors, location of antenna
discharge unit, connection to grounding electrodes,
and requirements for the grounding electrode. See
Figure.
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
ANTENNA
LEAD IN WIRE
GROUND
CLAMPS
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
Notes:
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
1. Item 3 is not required except for grounded or polarized equipment.
2. Item 17 and 18 are not required except for units provided with
antenna terminals.
GROUND CLAMP
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
3. Item 17 complies with UL in the U.S.A.
NEC – NATIONAL ELECTRICAL CODE
Download from Www.Somanuals.com. All Manuals Search And Download.
System connections
Make connections as shown below.
When connecting the related system components, refer also to the
instruction manuals of the related components.
Caution:
6
Do not plug in the power lead until all connections are com-
pleted.
( Except for U.S.A., Canada )
Caution
Be sure to adhere followings. Or proper ventilation will be blocked causing damage or fire hazard.
÷ Do not place any objects impairing heat radiation onto the top of unit.
÷ Leave a space around the unit (from the largest outside dimension including projection)
equal or greater than, shown below.
Top panel : 50 cm
Side panel : 10 cm
Back panel : 10 cm
SYSTEM CONTROL
REC
PLAY
L
L
R
R
LINE IN LINE OUT
To AC outlet
Audio cord
Audio cord
System control
cord
PHONO
CD
TUNER
TAPE
REC PLAY
L
R
SL-16
SYSTEM
CONTROL
Amplifier or Receiver
Turntable
SL-16
SYSTEM
CONTROL
System control
cord
CD player
7
6
0
4
1
¢
¡
1. Connect all cords firmly. If connections are loose, there could be loss of sound or noise produced.
2. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging/unplugging
connection cords without removal of the power cord can cause malfunctions or damage to the unit.
3. Do not connect up a power source which is larger than that indicated on the socket at rear of the unit.
NNootteess
Download from Www.Somanuals.com. All Manuals Search And Download.
System connections
7
SYSTEM
CONTROL
SYSTEM CONTROL CONNECTIONS
Connecting system control cords after connecting a KENWOOD
audio component system lets you take advantage of convenient
system control operations.
SYSTEM
CONTROL
This unit is compatible only with the [SL16] mode. The system con-
trol operation is not available if the unit is connected in the [XS-8]
connection mode.
SYSTEM
CONTROL
SYSTEM
CONTROL
(dB)
—
—
5
0
+3
+6
(dB)
TAPE
A
TAPE
B
SYSTEM
CONTROL
÷Do this operation after completing all connections.
(Ensure that the unit is set to POWER OFF.)
1. If your amplifier or receiver does not have a system control terminal,
do not connect any system control cords to the system control termi-
nals on the other components.
NNootteess
2. Do not connect system control cords to any components other than
those specified by Kenwood. It may cause a malfunction and damage
your equipment.
3. Be sure the system control plugs are inserted all the way in to the
system control terminals.
SYSTEM CONTROL OPERATIONS
Remote Control
Lets you operate this unit with the system remote control unit supplied with the amplifier or receiver.
Automatic Operation
Automatically switches the input selector on the amplifier or receiver when you start playback from this unit.
Synchronized Recording
Lets you synchronize recording with the start of playback when recording from CD.
See the operating instructions supplied with your cassette deck for details.
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and indicators (KXF-W1030 / CT-401)
8
DISPLAY
PEAK LEVEL METER
DOLBY NR reference level
(dB)
—5
0
+3
+6
(dB)
DOLBY NR
DUBBING
!
@
DISPLAY
2
1
0
9
8
PUSH/OPEN
PUSH/OPEN
PEAK LEVEL METER
0
0
(dB)
—
5
0
+3
+6
(dB)
POWER
DOLBY NR
DUBBING
-
ON –OFF
DOLBY NR
DUBBING
1
¡
1
¡
8PAUSE ¶REC/ARM
TAPE A
FULL LOGIC CONTROL
TAPE B
FULL LOGIC CONTROL
7
3
7
3
REC LEVEL
DPSS
MIN
MAX
3
4
5
6 7
6 Deck B operation keys
3key :
8 DUBBING key:
Press to start tape dubbing.
9 DOLBY NR key:
1 Deck A
Playback-only tape deck.
2 POWER switch:
Play key.
1key:
PresstoselecttheDolbyNoiseReduction
mode.
0 Deck B
Tape deck which is capable of both
playback and recording.
! DOLBY NR indicator
@ DUBBING indicator
Press to turn power -ON and –OFF.
3 Deck A operation keys
3key :
Rewind key (for fast winding of tape
toward the left reel seen from you)
33key:
Play key.
Fast forward key (for fast winding of
tape toward the right reel seen from
you)
1key:
Rewind key. (for fast winding of tape
toward the left reel seen from you)
33key:
7key:
Stop key
¶REC/ARM key:
Press in stop mode to start recording
or press in record mode to let the
recording pause after leaving a non-
recorded blank of 4 seconds.
indicator : (Recording indicator)
8PAUSE key:
Press to let recording pause temporarily.
7 REC LEVEL control:
Fast forward key (for fast winding of
tape toward the right reel seen from
you)
7key:
Stop key.
4 Cassette holder (Deck A)
Press the area marked "PUSH/OPEN
0" to load or eject a tape.
5 Cassette holder (Deck B)
Press the area marked "PUSH/OPEN
0" to load or eject a tape.
Adjusts the recording level.
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and indicators (KXF-W3030 / CT-403)
9
PEAK LEVEL METER
DOLBY NR reference level
DISPLAY
(dB)
—5
0
+3
+6
(dB)
O p
∏
DOLBY NR
DUBBING
@
#
$
DISPLAY
2
0
9
1
!
PUSH/OPEN
PUSH/OPEN
PEAK LEVEL METER
0
0
(dB)
—
5
0
+3
+6
(dB)
POWER
O
p
∏
DOLBY NR
DUBBING
-
ON –OFF
REV.MODE DOLBY NR DUBBING
8
1
¡
1
¡
8PAUSE ¶REC/ARM
TAPE A
TAPE B
AUTO REVERSE
AUTO REVERSE
@
7
#
@
7
#
REC LEVEL
DPSS
MIN
MAX
3
4
5
6 7
6 Deck B operation keys
8 DOLBY NR key:
1 Deck A
@ , #keys : (Play keys)
PresstoselecttheDolbyNoiseReduction
mode.
9 DUBBING key:
Press to select the DUBBING mode.
0 REV.MODE key:
Press to select the REVERS mode.
! Deck B
Thisdeckiscapableofbothplaybackand
recording.
@ Reverse mode indicators
# DOLBY NR indicator
$ DUBBING indicator
Playback-only tape deck.
2 POWER switch:
@ , # indicators : (direction indicators)
Tapes are played in the directions
indicatedbytheirrespectiveindicators.
1key:
Press to turn power -ON and –OFF.
3 Deck A operation keys / indicators
@ , #keys : (Play keys)
@ , # indicators : (direction indicators)
Tapes are played in the directions
indicatedbytheirrespectiveindicators.
1key:
Rewind key (for fast winding of tape
toward the left reel seen from you)
33key:
Fast forward key (for fast winding of
tape toward the right reel seen from
you)
Rewind key (for fast winding of tape
toward the left reel seen from you)
33key:
Fast forward key (for fast winding of
tape toward the right reel seen from
you)
7key:
Stop key
¶REC/ARM key:
Press in stop mode to start recording
or press in record mode to let the
recording pause after leaving a non-
recorded blank of 4 seconds.
7key:
Stop key
4 Cassette holder (Deck A)
Press the area marked "PUSH/OPEN
0" to load or eject a tape.
5 Cassette holder (Deck B)
Press the area marked "PUSH/OPEN
0" to load or eject a tape.
indicator : (Recording indicator)
8PAUSE key:
Press to let recording pause temporarily.
7 REC LEVEL control:
Adjusts the recording level.
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to cassette tapes
The figure shows an example for the CT-403 or KXF-W3030
10
PUSH/OPEN
PUSH/OPEN
0
0
(dB)
—
—5
0
+3
+6
(dB)
POWER
1
@
¡
1
@
¡
8PAUSE ¶REC/ARM
TAPE
A
TAPE
B
AUTO REVERSE
AUTO REVERSE
7
#
7
#
: Keys or controls to be used in this operation
Preparation
1 Set the POWER switch to ON.
2 Load a cassette tape in deck A or B. (Normal playback)
Load cassette tapes in both decks. (Relay playback)
Press the area marked
PUSH/OPEN 0.
POWER
PUSH/OPEN
(dB
)
—
—
5
D
P
U
P
U
O
LB
0
S
H
S
H
Y
N
R
/O
/O
0P
0P
E
N
E
N
(dB
(dB
)
)
—
—
—
—
5
5
D
DO
O
LB
0
LB
Y
Y
N
R
N
R
- ON –OFF
1
¡
8P
1
1
¡
¡
8
7
7
R
E
C
L
7
7
R
E
C
÷Be sure to close the cassette
holder securely by pushing it.
÷Be sure to remove tape slack before insertion.
÷The type of tape, that is, the Normal, High position or
Metal position (playback only) is selected automatically.
÷This unit cannot record sound on a Metal tape.
Normal playback
1Determine the playback conditions.
÷ Set to OFF the Dolby NR key when playing a tape recorded with-
out using Dolby NR.
1 Select the Dolby NR mode.
DOLBY NR
Dolby NR off
Dolby NR on
(dB)
—
—
5
0
+3
+6
(dB)
1 Dolby NR on
2 Dolby NR off
DOLBY NR
DOLBY NR
Goes off
Lit
2 Select the playback mode.
÷ Each press switches the indication.
(CT-403/KXF-W3030 only)
1 “[” :Double-side playback which stops tape after having
played both sides.
REV.MODE
(dB)
—
—5
0
+3
+6
(dB)
2 “”” :Playback is endless.
3 ““” :One-way playback which stops tape after having played
a single side.
2Start playback.
CT-403
CT-401
/KXF-W3030
/KXF-W1030
3
or
@
7
#
÷ Tapes are played in the directions indicated by their
respective indicators. (CT-403/KXF-W3030)
÷ Playback stops automatically at the end of tape.
(CT-401/KXF-W1030)
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to cassette tapes
11
Fast Forward and Rewind
To stop playback
1 Stop playback.
(dB)
—
—
5
0
+3
+6
(dB)
7
(dB)
—
—
5
0
+3
+6
(dB)
7
2 Press the 1 key or ¡ key.
1
¡
(dB)
—
—5
0
+3
+6
(dB)
1: Fast tape winding in the | direction
¡: Fast tape winding in the \ direction
÷ When taking out the tape, press the area marked PUSH/
OPEN 0 after the tape transport has stopped completely.
÷ Press the stop (7) key to stop fast tape winding.
Relay playback (CT-403/KXF-W3030 only)
This function plays back the tapes in both decks A and B
continuously and repeatedly.
0
1Load cassette tapes in both decks.
2Determine the playback conditions.
÷ Set to OFF the Dolby NR key when playing a tape recorded with-
out using Dolby NR.
1 Select the Dolby NR mode.
Dolby NR off
Dolby NR on
1 Dolby NR on
2 Dolby NR off
DOLBY NR
(dB)
—
—
5
0
+3
+6
(dB)
DOLBY NR
DOLBY NR
Goes off
Lit
2 Select the playback mode.
÷ Each press switches the indication.
1 “[” :Relay playback of two sides of tapes in decks A and B is
repeated.
REV.MODE
(dB)
—
—5
0
+3
+6
(dB)
2 “”” :Relay playback is not available with this setting.
3 ““” :Relay playback of one side only for deck A and deck B,
and then playback stops.
3Start playback.
@
7
#
(dB)
—
—5
0
+3
+6
(dB)
÷ Tapes are played in the directions indicated by their respective indica-
tors on the display.
÷ The playback starts with the deck the play key of which is pressed.
To Stop relay playback
Press stop (7) key of the deck that is
playing.
(dB)
—
—
5
0
+3
+6
(dB)
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient music search (DPSS)
The DPSS (Direct Program Search System) enables the following convenient operations according to the instructions of the
operation keys (these operation are however not available on both decks simultaneously). The DPSS functions are based on
the detection of non-recorded spaces of 4 seconds or more between tunes.
12
1.Skip play
: By specifying a tune located several tunes beyond (or behind) the tune being played, skips tunes
between the current tune and the selected tune and starts playback from the beginning of the
selected tune. Up to 16 tunes can be skipped in Skip Search.
2.Single-tune repeated
playback
: One single tune is played back repeatedly up to 16 times.
Tune being played.
The figure shows an example for the CT-403 or KXF-W3030
PUSH/OPEN
PUSH/OPEN
0
0
(dB)
—
—5
0
+3
+6
(dB)
POWER
1
@
¡
1
@
¡
8PAUSE ¶REC/ARM
TAPE
A
TAPE
B
AUTO REVERSE
AUTO REVERSE
7
#
7
#
↑
↑
↑
↑
↑
↑
↑
↑
↑
Space (non-recorded).
Space (non-recorded).
: Keys or controls to be used in this operation
Tape transport direction \.
Skip play operation
The example below shows the case in which the direction indicated by the tape transport direction indicator is 3. If the direction
indicated by the tape direction indicator is 2, always press the keys for the opposite directions to those shown in the
illustrations below.
To play a tune located immediately after the tune being
played
To play the tune being played from the beginning
1
¡
1
¡
(dB)
—
—
5
0
+3
+6
(dB)
(dB)
—
—
5
0
+3
+6
(dB)
Press once during the playback.
Press once during the playback.
To play a tune located 4 tunes beyond
To play the tune located 4 tunes behind
1
¡
1
¡
(dB)
—
—5
0
+3
+6
(dB)
(dB)
—
—5
0
+3
+6
(dB)
Press 4 times during the playback.
Press 5 times during the playback.
DPSS will not function properly with the following types of tapes.
÷ Tapes containing spaces of 4 seconds or more, such as conversations and speeches.
÷ Tape containing extremely low levels or non-recorded spaces in the middle of tunes, such as classical music.
÷ Tapes containing recording of large noise between tunes.
NNootteess
÷ Tapes containing spaces of less than 4 seconds between tunes.
÷ Tapes recorded with low recording level.
÷ Tapes recorded using Cross-fade recording.
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient music search (DPSS)
13
Single-tune repeated playback operation
Play the tune to be repeated.
1
(CT-401/KXF-W1030)
Press the play key of the same direction
as the current tape transport direction.
2
(dB)
—
—5
0
+3
+6
(dB)
When direction of tape direction indica-
tor is 3:
(CT-403/KXF-W3030)
(dB)
—
—5
0
+3
+6
(dB)
3
÷Normal playback resumes after repeating the same tune for 16 times.
÷Press the stop (7) key to stop playback and cancel this operation.
Download from Www.Somanuals.com. All Manuals Search And Download.
How to record (deck B only)
Since this unit is not designed for use with metal tapes,
recording on metal tapes cannot be carried out.
The figure shows an example for the CT-403 or KXF-W3030
14
PUSH/OPEN
PUSH/OPEN
0
0
(dB)
—
—5
0
+3
+6
(dB)
POWER
Preparation
A
1
@
¡
1
@
¡
8PAUSE ¶REC/ARM
Insert a tape in deck B.
TAPE
A
TAPE
B
AUTO REVERSE
AUTO REVERSE
7
#
7
#
PUSH/OPEN
0
(dB)
—
—5
0
+3
+6
(dB)
: Keys or controls to be used in this operation
1
@
¡
8PAUSE ¶REC/ARM
TAPE
B
AUTO REVERSE
7
#
1Set up the cassette deck.
1 Select the Dolby NR mode.
÷ Press to record with the DOLBY NR.
1 Dolby NR on
2 Dolby NR off
Dolby NR off
Dolby NR on
DOLBY NR
(dB)
—
—
0
+3
+6
(dB)
DOLBY NR
DOLBY NR
Goes off
Lit
2 Select the recording mode.
÷ Each press switches the indication.
(CT-403/KXF-W3030 only)
1 “[” :Double-side recording which stops tape after having
recorded both sides.
REV.MODE
(dB)
—
—
5
0
+3
+6
(dB)
2 “”” :Recording stops after having recorded both sides.
3 ““” :One-way recording which stops tape after having re-
corded a single side.
2Select the source to be recorded.
3Set the recording level.
1 Play a music source.
2 Enter the record-pause mode.
÷While pressing the PAUSEkey,
press the REC/ARM key.
8PAUSE ¶REC/ARM
(dB)
—
—5
0
+3
+6
(dB)
3 Adjust the recording level.
÷ Adjust so that seg-
ments around the 0 dB
REC LEVEL
(dB)
—
—5
0
+3
+6
(dB)
(dB)
—
5
0
+3
+6
(dB)
segment of the peak
level meter light up at
times.
MIN
MAX
4 Stop playing the source.
4Start recording.
1 Play the music source from the
beginning.
2 Press the ÷REC/ARM key.
Press once.
¶REC/ARM
(dB)
—
—5
0
+3
+6
(dB)
÷ Recording will start.
÷ The deck enters the stop mode automatically when the tape has
been recorded till the end. (CT-401/KXF-W1030)
Download from Www.Somanuals.com. All Manuals Search And Download.
How to record (deck B only)
15
To pause recording temporarily
Pause
To resume recording
¶REC/ARM
8PAUSE
To stop recording
Stop the tape transport.
1
7
(dB)
—
—
5
0
+3
+6
(dB)
Stop playing the source component.
2
How to provide non-recorded blanks between programs
During recording
In stop mode
Press successively twice.
Press once.
¶REC/ARM
¶REC/ARM
÷After leaving a non-recorded blank of about 4 seconds, the deck enters
the record-pause mode.
Dolby noise reduction system
The Dolby noise reduction system was developed to reduce the tape hiss noise generated during playback.
The optimum effect of the Dolby NR system is obtained when the same type NR system is used for both recording and playback. If a
different type NR system is used, playback is not performed correctly. Make sure that the same type noise reduction system is used for
both recording and playback.
Dolby B NR
The most popular noise reduction system used in home audio components. Usually, Dolby NR system corresponds to B NR.
Download from Www.Somanuals.com. All Manuals Search And Download.
Tape dubbing operation
The dubbing refers to the copy of the recorded contents of a
The figure shows an example for the CT-403 or KXF-W3030
tape to another tape (tape in Deck A =tape in Deck B).
16
PUSH/OPEN
PUSH/OPEN
0
0
(dB)
—
—5
0
+3
+6
(dB)
POWER
1
@
¡
1
@
¡
8PAUSE ¶REC/ARM
TAPE
A
TAPE
B
AUTO REVERSE
AUTO REVERSE
7
#
7
#
: Keys or controls to be used in this operation
1Insert tapes in the cassette decks.
Tape to be played
Tape to be recorded onto
A
A
PUSH/OPEN
PUSH/OPEN
0
0
(dB)
—
—5
0
+
+6
(dB)
POWER
1
@
¡
1
@
¡
8PAUSE ¶REC/ARM
TAPE
B
TAPE
B
AUTO REVERSE
AUTO REVERSE
7
#
7
#
Deck A
Deck B
2Start dubbing.
Press the DUBBING key.
÷ Dubbing will start.
DUBBING
DUBBING
(dB)
—
—5
0
+3
+6
(dB)
1. The recording level cannot be adjusted for dubbing.
Lights up
2. The DOLBY NR switch does not function during dubbing.
The tape recorded by dubbing features the same NR
system as the original tape in Deck A.
NNootteess
To stop dubbing
Press the (7) STOP key of deck B.
(dB)
—
—
5
0
+3
+6
(dB)
7
÷ Both decks A and B enter the stop mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient CD recording (deck B only)
ByconnectingthisunitwithaKENWOODamplifier(receiver)
with a SYSTEM CONTROL jack and a KENWOOD CD player
with a SYSTEM CONTROL jack using system control cords,
recording on this unit and playback on the CD player can be
started simultaneously.
The figure shows an example for the CT-403 or KXF-W3030
17
PUSH/OPEN
PUSH/OPEN
0
0
(dB)
—
—5
0
+3
+6
(dB)
POWER
Sincethisunitisnotdesignedforrecordingwithmetal(TYPE
IV) tapes, do not use metal tapes for recording.
1
@
¡
1
@
¡
8PAUSE ¶REC/ARM
TAPE
A
TAPE B
AUTO REVERSE
AUTO REVERSE
7
#
7
#
: Keys or controls to be used in this operation
1Preparation
1 Complete the connections refer-
ring to "System connections".
6
2 Set up the cassette deck
$
3 (Load a disc in the CD player.)
2 Adjust the recording level.
Play a CD.
Set the record-pause mode.
Adjusttherecordingrecording
level.
PuttheCDplayerinstopmode.
1
2
3
4
8PAUSE ¶REC/ARM
Press the 6 key
of the CD player.
Press (7) STOP key
of the CD player.
“How to record.”
$
÷While pressing the PAUSE key,
press the REC/ARM key.
3 Set the record-pause mode.
8PAUSE ¶REC/ARM
(dB)
—
—5
0
+3
+6
(dB)
÷ While pressing the PAUSE key, press the REC/ARM key.
4 Start playing the CD.
÷ Synchro recording is not possible when tracks of more than one CD are
programmed using a Carrousel type CD player.
Press the 6key of the CD player.
÷ Recording starts at this moment.
÷ When the CD player has completed playback, the cassette deck stops
recording and enters the stop mode.
To pause
: Press the 6key of the CD player.
To restart recording : Press the 6key of the CD player.
To stop : Press the 7key of the CD player.
÷If the stop (7) key of the cassette deck is pressed, the cassette deck
enters the stop mode but the CD player does not stop.
Download from Www.Somanuals.com. All Manuals Search And Download.
For pleasant use
Notes on cassette tape
18
Safety tab (accidental erasure prevention tab)
After an important recording has been finished, break the
safety tab, to prevent the recorded contents from being
erased or recorded on accidentally.
To store cassette tapes
Do not store the tapes in a place which is subject to direct sun-
light, or near equipment that generates heat. Keep the cassette
tapes away from any magnetic field.
For A side
For B side
When there is slack in the tape
In such a case, insert a pencil into the reel hole and wind the
reel hub to remove the slack.
Apply tape only to the position
To re-record
where the tab has been removed.
1. Longer tape than 110 minutes cassette tape
Since longer tape than 110 minutes cassette tape is
very thin, the tape could adhere to the pinch roller or be
easily cut. It is recommended that these tapes not be
used with this unit to prevent possible damage.
2. Endless tapes
Do not use an endless tape, as this could damage the mecha-
nism of the unit.
NNootteess
Maintenance
Cleaning the head section
Demagnetizing the head
Cleaning the heads and peripheral
When the recording / playback head is magnetized,
the sound quality will be deteriorated. In such a case,
demagnetize the head using a commercially available
demagnetizer (head eraser).
components
Cotton Swab
For maintaining the best condition of the
deck and for longer service life, always keep
the head (recording / playback / erase), cap-
stan and pinch roller clean. To clean them,
perform the following:
Capstan
1. Open the cassette holder.
There are precisely aligned parts around the
heads, including the tape guides.
When cleaning, pay special attention so as
not to apply shock to them.
2. Using a cotton swab dipped in alcohol,
clean the head (recording / playback /
erase), capstan and pinch roller carefully.
Head
NNoottee
Pinch roller
Cleaning
Do not use contact cleaners because it could cause a malfunc-
tion. Be specially careful against contact cleaners containing
oil, for they may deform the plastic components.
Unplug this appliance from the wall outlet before cleaning. Do
not use volatile solvents such as alcohol, paint thinner, gasoline,
or benzine, etc. to clean the cabinet. Use a clean dry cloth.
Download from Www.Somanuals.com. All Manuals Search And Download.
In case of difficulty
What appears to be a malfunction may not always be serious. If your unit should not perform as expected,
consult the table below to see if the problem can be corrected before seeking help from your dealer or service
representative.
19
Symptom
Cause
Remedy
Sounds is not produced when the Play ¶ The connection cords are connected ¶ Connect the cords properly referring to
6
*
key is pressed.
improperly.
“System connections”.
¶ Clean the head referring to “Cleaning the
head section”.
¶ The head is dirty.
¶ Tape is irregularly wound and hard to ¶ Replace the tape.
take up.
¶ A non-recorded tape is being played.
¶ Play a recorded tape.
The deck does not work when an op- ¶ The cassette holder is not closed com- ¶ Close the cassette holder completely.
eration key is pressed.
pletely.
¶ The operation key was pressed immedi- ¶ Press the desired operation key in a few
ately after closing the cassette holder.
seconds after closing the cassette holder.
¶ The operation key was pressed within
less than 4 seconds after the power was ¶ Press the desired operation key in more
turned on.
¶ Tape is not inserted.
than 4 seconds after turning the power
on.
¶ Tape is irregularly wound and hard to ¶ Insert a tape.
take up.
¶ Replace the tape.
¶ Tape has been rewound to a reel.
¶ Re-insert the tape to play the other side.
The dubbing on Deck A and Deck B
ends at different timing.
¶ This is due to the difference in tape ¶ A small time difference is not regarded
length or to the characteristics of the
cassette deck mechanisms.
as a failure.
¶ Press in the Stop mode.
The cassette holder does not open ¶ The area marked "PUSH/OPEN (0)" is
when the area marked "PUSH/OPEN
pressed during recording.
(0)" is pressed.
Sound is hoarse, or high frequencies
are not audible.
¶ The head is dirty.
¶ Clean the head referring to “Cleaning the
head section”.
¶ Replace the tape.
*
$
¶ The tape is stretched or wrinkled.
Sound is distorted.
¶ Adjust the recording level referring to
“How to record”.
¶ The recording level was too high.
¶ Replace the tape.
¶ A tape recorded with distorted sound is
being played.
Recording is not initiated when the
REC/ARM (¶) key is pressed.
¶ The protection tab on the cassette has ¶ Use a cassette with unbroken tab or
been broken. close the hole.
¶ The cassette holder is not closed com- ¶ Close the cassette holder completely.
pletely.
¶ The recording level is set to the mini- ¶ Adjust the recording level referring to
$
mum position.
“How to record”.
¶ The TAPE input selector is selected on ¶ Press the input selector key of the
the amplifier.
source to be recorded.
¶ Tape has been fully wound to a reel.
¶ Change the tape transport direction of
Deck or insert the tape inversely.
Noise level is high.
¶ The head is magnetized.
¶ Demagnetize the head referring to
“Cleaning the head section”.
*
$
¶ External noise is induced.
¶ The recording level was too low.
¶ Install the system apart from other elec-
trical appliances and TV set.
¶ Adjust the recording level referring to
“How to record”.
¶ A tape recorded with Dolby NR ON is ¶ Press the DOLBY NR switch to ON.
being played with Dolby NR OFF.
Sound is vibrating.
¶ The capstans or pinch rollers are dirty.
¶ Clean the head referring to “Cleaning
the head section”.
*
¶ Tape is irregularly wound.
¶ Wind the tape regularly by fast forward-
ing, rewinding or playing it fully from one
reel to another.
1. With some tapes, a squeaky noise is produced when the tape is stopped automatically. This is due to the tape protection function, and not
a malfunction.
NNoottee
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Caution : Read this page carefully to ensure safe operation.
Track System
4 track, 2 channel stereo
Recording System AC bias (Frequency: 105 kHz)
20
Heads
A DECK
Playback heads ......................................... 1
B DECK
Playback / recording heads ................... 1
Erasing head ............................................. 1
A and B DECK ................................................. 1
Motors
Wow and Flutter ....................................... 0.3 % (W.RMS)
Frequency Response
TYPE I Tape............................ 30 Hz to 13,000 Hz, 3 dB
TYPE II Tape........................... 30 Hz to 13,000 Hz, 3 dB
Signal to Noise Ratio
Dolby NR OFF ............................................................ 57 dB
Dolby B NR ON (3rd, H.D., 3 %, TYPE II Tape) .... 66 dB
Input sensitivity / Impedance
LINE IN ................................................... 122.8 mV / 54 kΩ
Output Level / Impedance
LINE OUT................................................. 775 mV / 1.1 kΩ
[General]
Power Consumption ..................................................... 14 W
Dimensions
W ............................ :440mm (17-5/16”)
H .............................. :128 mm (5-1/16”)
D ............................. : 270 mm (10-5/8”)
Weight (Net)................................................... 4.1 kg (9.0 lb)
1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without
notice.
NNoottee
2. The full performance may not be exhibited in extremely coud location (under a water-freezing temperature).
For your records
Record the serial number, found on the back of the unit, in the
spaces designated on the warranty card, and in the space provided
below. Refer to the model and serial numbers whenever you call
upon your dealer for information or service on this product.
Model
Serial Number
Download from Www.Somanuals.com. All Manuals Search And Download.
|